Académique Documents
Professionnel Documents
Culture Documents
FTB-200
NETWORK TESTING
USER GUIDE
Copyright 2006 EXFO Electro-Optical Engineering Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, be it electronically, mechanically, or by any other means such as photocopying, recording or otherwise, without the prior written permission of EXFO Electro-Optical Engineering Inc. (EXFO). Information provided by EXFO is believed to be accurate and reliable. However, no responsibility is assumed by EXFO for its use nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent rights of EXFO. EXFOs Commerce And Government Entities (CAGE) code under the North Atlantic Treaty Organization (NATO) is 0L8C3. The information contained in this publication is subject to change without notice. Trademarks EXFOs trademarks have been identified as such. However, the presence or absence of such identification does not affect the legal status of any trademark. Units of Measurement Units of measurement in this publication conform to SI standards and practices. Patents FASTEST is protected by US patent(s) 5,305,078 and/or 5,455,672. EXFOs Universal Interface is protected by US patent 6,612,750.
ii
FTB-200
Contents
Contents
Certification Information ....................................................................................................... ix
iii
Contents
iv
FTB-200
Contents
15 Managing Trace Files from the OTDR Test Application .......................... 155
Saving a Trace in a Different Format ...................................................................................155 OTDR Trace File Compatibility .............................................................................................156 Copying, Moving, Renaming or Deleting Trace Files ..........................................................158
Contents
17 Using the OTDR as a Light Source or VFL ................................................165 18 Description of Event Types ......................................................................169
Span Start ..........................................................................................................................169 Span End ...........................................................................................................................169 Continuous Fiber ...............................................................................................................170 End of Analysis ..................................................................................................................171 Non-Reflective Event ..........................................................................................................172 Reflective Event .................................................................................................................173 Positive Event .....................................................................................................................174 Launch Level ......................................................................................................................175 Fiber Section ......................................................................................................................176 Merged Reflective Event ....................................................................................................177 Echo ..................................................................................................................................179 Reflective Event (Possible Echo) .........................................................................................180
20 Customizing Your MultiTest Module ........................................................183 21 Setting Up Your MultiTest Module ...........................................................185
Installing the EXFO Universal Interface (EUI) .......................................................................185 Cleaning and Connecting Optical Fibers .............................................................................186 Setting Autonaming Scheme ..............................................................................................187 Setting Pass/Fail Thresholds ................................................................................................189
vi
FTB-200
Contents
26 Using a Light Source ................................................................................ 227 27 Identifying Fiber Faults Visually .............................................................. 229 28 Communicating with Other Users ........................................................... 231
Sending and Receiving Text Messages .................................................................................231 Communicating by Voice ....................................................................................................234
vii
Contents
33 Warranty ....................................................................................................277
General Information ...........................................................................................................277 Liability ...............................................................................................................................278 Exclusions ...........................................................................................................................278 Certification ........................................................................................................................278 Service and Repairs .............................................................................................................279 EXFO Service Centers Worldwide ........................................................................................280
Index ...............................................................................................................285
viii
FTB-200
Certification Information
Certification Information
F.C.C. Information
Electronic test equipment is exempt from Part 15 compliance (FCC) in the United States. However, compliance verification tests are systematically performed on most EXFO equipment.
Information
Electronic test equipment is subject to the EMC Directive in the European Union. The EN61326 standard prescribes both emission and immunity requirements for laboratory, measurement, and control equipment. This unit has undergone extensive testing according to the European Union Directive and Standards.
CSA Information
This unit is certified by the CSA (certificate number 162451) and was evaluated according to applicable CSA and UL standards (as confirmed by C-US mark) as well as applicable IEC standards for use in Canada, the United States, and other countries.
ix
Certification Information
DECLARATION OF CONFORMITY
Application of Council Directive(s): Manufacturers Name: Manufacturers Address: 73/23/EEC - The Low Voltage Directive 89/336/EEC - The EMC Directive EXFO ELECTRO-OPTICAL ENG. 400 Godin Avenue, Quebec (Quebec) Canada G1M 2K2 (418) 683-0211 Industrial Scientific Equipment FTB-150 Compact OTDR and FTB-200 Compact Modular Platform
EN 61010-1:2001 EN 55022: 1998/ A2: 2003 EN 60825-1:1994 / A2: 2001 EN 61326:1997/ A3: 2003
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General Requirements. Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment. Safety of laser products Part 1: Equipment classifications, requirements, and users guide Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive and Standards.
Manufacturer
Signature:
Full Name:
Position:
Address: Date:
FTB-200
Certification Information
DECLARATION OF CONFORMITY
Application of Council Directive(s): Manufacturers Name: Manufacturers Address: 73/23/EEC - The Low Voltage Directive 89/336/EEC - The EMC Directive EXFO ELECTRO-OPTICAL ENG. 400 Godin Avenue, Vanier (Quebec) Canada G1M 2K2 (418) 683-0211 Industrial Scientific Equipment FTB-7000B, FTB-7000D, FTB-74000C Optical Time Domain Reflectometer
EN 60825-1:1994 / A2: 2001 EN 55022: 1998/ A1: 2000 EN 61326:1997/ A2: 2001
Safety of laser products Part 1: Equipment classifications, requirements, and users guide Limits and methods of measurement of radio disturbance characteristics of information technology equipment Electrical Equipment for Measurement, Control and Laboratory Use EMC Requirements
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive and Standards.
Manufacturer
Signature:
Full Name:
Position:
Address: Date:
xi
Certification Information
DECLARATION OF CONFORMITY
Application of Council Directive(s): Manufacturers Name: Manufacturers Address: 73/23/EEC - The Low Voltage Directive 89/336/EEC - The EMC Directive EXFO ELECTRO-OPTICAL ENGINEERING INC. 400 Godin Avenue Vanier, Quebec Canada G1M 2K2 (418) 683-0211 Industrial Scientific Equipment FTB-3930 MultiTest Module
Standard(s) to which Conformity is Declared: EN 60825-1: 1994/ A2: 2001 EN 61326: 1997/ A2: 2001 EN 55022: 1998/ A1: 2000 Safety of Laser Products-Part 1: Equipment Classification, Requirement, and Users guide Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements Limits and methods of measurement of radio disturbance characteristics of information technology equipment
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive and Standards.
Manufacturer
Signature:
Stephen Bull, E. Eng Vice-President Research and Development 400 Godin Avenue Vanier, Quebec, Canada July 20, 2004
xii
FTB-200
Front panel
Touchscreen
LEDs Keypad
Brightness button
On/Off button
Left panel
Right panel
Fiber Inspection Probe port Card reader RJ-45 port USB client port
FTB-200
Top panel
VFL Built-in power meter
Battery compartment
Module slots
Bottom panel
Retaining screws
LED
Status
Meaning
Unit is on. Unit is off. Unit powered or not by AC and battery fully charged. Battery is charging. Unit is not powered by AC and battery is low. Battery error. Unit is off or unit is not powered by AC and battery level is above the low-battery threshold. Laser status LED At least one module emits an optical signal. No modules emit signal. Result status (from application currently displayed). Pass (result does not exceed the defined threshold) Fail
FTB-200
Keypad Description
The keypad of your unit gives you access to various functions at all times. The table below shows an overview of their purpose. Note: The function of certain buttons vary with the applications.
Button
Meaning
First shortcut button. Starts the associated application (see Configuring the Shortcut Buttons on page 34). Second shortcut button. Starts the associated application or the built-in power meter application (see Configuring the Shortcut Buttons on page 34). Start fiber probe application.
Turn on and off your unit: Suspend: hold down button a few seconds until the unit beeps once. Shutdown: hold down button until the unit beeps twice. For more information, see Turning On or Off the Unit on page 25. Adjust screen brightness. Lock/Start acquisition/F1 button (depends on application). Mute/Move markers/F2 button (depends on application).
Button
Meaning
USB client (secondary) port (type B connector) to connect a USB cable for data transfer between your unit and a computer. RJ-45 port to connect your unit to an Ethernet network.
FTB-200
Power Sources
The unit operates with the following power sources: AC adapter/charger (connected to a standard power outletindoor use only). rechargeable Lithium-Ion battery (automatically takes over if you disconnect the AC adapter/charger)
IMPORTANT
The unit will function only if the battery is present and the battery door is in place (even if you use it with the AC adapter/charger). Possible to switch from AC adapter/charger to battery power or vice versa without affecting operation Automatic recharge when AC adapter/charger is connected Rechargeable battery (for clock and RAM, used when Lithium-Ion battery and AC power are both unavailable). The clock battery has an autonomy of approximately 15 minutes after which the unit will restart exactly as if you performed a shutdown (button held down until the unit beeps twice).
Conventions
Before using the product described in this manual, you should understand the following conventions:
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not proceed unless you understand and meet the required conditions.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Do not proceed unless you understand and meet the required conditions.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in component damage. Do not proceed unless you understand and meet the required conditions.
IMPORTANT
Refers to information about this product you should not overlook.
FTB-200
Safety Information
WARNING
Do not install or terminate fibers while a light source is active. Never look directly into a live fiber and ensure that your eyes are protected at all times.
WARNING
Use of controls, adjustments and procedures for operation and maintenance other than those specified herein may result in hazardous radiation exposure.
Safety Information
Laser Safety information
QST498C
Affixed to side of OTDR and MultiTest modules. Affixed to back of unit (under the stand).
10
FTB-200
Safety Information
Laser Safety information
Note: Labels shown for information purposes only. They are not affixed to your product.
11
Safety Information
Electrical Safety Information
WARNING
Use the external power supply indoors only. Position the unit so that the air can circulate freely around it. Operation of any electrical instrument around flammable gases or fumes constitutes a major safety hazard. To avoid electrical shock, do not operate the unit if any part of the outer surface (covers, panels, etc.) is damaged. Only authorized personnel should carry out adjustments, maintenance or repair of opened units under voltage. A person qualified in first aid must also be present. Do not replace any components while power cable and battery are connected. Capacitors inside the unit may be charged even if the unit has been disconnected from its electrical supply.
12
FTB-200
Safety Information
Electrical Safety Information
Equipment Ratings
Temperature Operation Storage Relative humidityc unit AC adapter Maximum operation altitude Pollution degree Installation category Power supply ratingd 95 % non-condensing 0 % to 80 % non-condensing 5000 m (16405 ft) 2 II 100 V to 240 V (50 Hz/60 Hz) maximum input current 1.6 A 0 C to 50 Ca (32 F to 122 F) -40 C to 60 Cb (-40 F to 140 F)
a. b. c. d.
With FTB-8XXX modules, the maximum operation temperature is 40 C (104 F). With FTB-8XXX modules, the maximum storage temperature is 50 C (122 F). Measured in 0 C to 31 C (32 F to 87.8 F) range, decreasing linearly to 50 % at 40 C (104 F). Not exceeding 10 % of the nominal voltage.
13
15
To install or upgrade the applications: 1. Turn on the computer and insert the installation CD in the CD-ROM drive. 2. Follow the on-screen instructions. All the necessary components, including ActiveSync, will be installed on your computer. 3. Once the installation is complete, turn on your unit. If necessary, exit the OTDR CE and MultiTest CE applications. 4. Connect the provided USB cable to the computer (type A end) and your unit (type B end). ActiveSync automatically opens and establishes the connection. 5. From the computer, on the Windows taskbar, click the Start button, then click Programs > EXFO > Handheld Instrument Software Manager. 6. Use Add Programs to install new versions. Follow the on-screen instructions. For more information, refer to the online help of the Handheld Instrument Software Manager (from the Help menu). 7. When installation is complete, simply disconnect the USB cable.
16
FTB-200
CAUTION
Never insert or remove a module while the Compact Modular Platform is turned on. This will result in immediate and irreparable damage to both the module and unit.
WARNING
When the laser safety LED ( ) is flashing, at least one of your modules is emitting an optical signal. Please check all modules, as it might not be the one you are currently using. To insert a module into the Compact Modular Platform: 1. Turn off your unit. 2. Position the Compact Modular Platform so that its front panel is facing you.
17
3. Take the module and place it vertically so that the retaining screw hole is at the left of the connector pins.
CAUTION
Inserting a module upside down could result in permanent damage to the module, as the connector pins might be bent.
4. Insert the protruding edges of the module into the grooves of the units module slot. 5. Push the module all the way to the bottom of the slot, until the retaining screw makes contact with the unit casing. 6. Place the Compact Modular Platform so that its bottom panel is facing you.
18
FTB-200
7. While applying slight pressure to the module, use a coin to turn the retaining screw clockwise until it is tightened. This will secure the module into its seated position.
Bottom panel
When you turn on the unit, the startup sequence will automatically detect the module.
19
To remove a module from the Compact Modular Platform: 1. Turn off your unit. 2. Position the Compact Modular Platform so that the bottom panel is facing you. 3. Using a coin, turn the retaining screw counterclockwise until it stops. The module will be slowly released from the slot.
Bottom panel
4. Place the Compact Modular Platform so that the top panel is facing you.
20
FTB-200
5. Hold the module by its sides or by the handle (NOT by the connector) and pull it out.
CAUTION
Pulling out a module by a connector could seriously damage both the module and connector. Always pull out a module by its casing. 6. Cover empty slots with the supplied protective covers.
21
22
FTB-200
CAUTION
Applying too much pressure on the card will cause irreparable damage to the card. 2. On your unit, go to the Main Menu, then select Setup > Bluetooth Device Properties. 3. From Bluetooth Manager, press Scan Device to launch printer detection. Wait a few seconds until items appear in the Untrusted list. 4. From the Untrusted list, select the first Printek M2 item and press the -> button.
23
5. When Bluetooth Manager prompts you to authenticate the device, answer No.
IMPORTANT
If you answer Yes, the application will not be able to use the printer. 6. Once the item is on the Trusted list, select it. Press Active. A red checkmark appears at the side of the icon to confirm the activation. 7. Repeat steps 4 and 6 with the second Printek M2 item. 8. Close Bluetooth Manager, then Control Panel and File Manager. The printer is now ready to use.
CAUTION
Always use the card readers eject button to remove the card from your unit.
24
FTB-200
25
2. Under Applications, select an application, then press Start. To start the Power Meter or Probe application: From Main Menu, press Power Meter or Probe.
26
FTB-200
27
28
FTB-200
Adjusting Brightness
To fit your work environment, you may adjust the LCD brightness. Values are kept in memory when you turn the unit off. Note: These settings do not apply to the Fiber Inspection Probe display. To adjust the display brightness: Press the OR 1. From the Main Menu, press Setup, then select Brightness. 2. Move the slider until the screen appearance is to your liking. key repeatedly to switch between brightness levels.
If you select the lowest brightness setting, the backlight will be completely deactivated. Press the button to reactivate it. 3. Press OK to return to the Control Panel window.
29
2. Press OK to return to the Control Panel window. Once you have modified the User interface language, you will be prompted to restart your unit. Note: Modifying the language of operation will affect the Windows CE language setting and vice versa.
30
FTB-200
31
32
FTB-200
To select a startup application: 1. From the Main Menu, press Setup, then select Application Startup. 2. Under Device power on, select the application you want to start automatically when you turn on your unit.
Note: The Power Meter application is only available if you purchased this option with your unit. 3. Press Apply, then OK to return to the Control Panel window.
33
3. Press Apply to confirm your changes, then OK to return to the Control Panel window.
34
FTB-200
35
Switches between available power meter wavelengths Switches between dBm and W as measurement units Accesses reference mode
36
FTB-200
IMPORTANT
Light must not reach the detector when nulling offsets. Always use an EUI or protective screw cap. Do not use a soft rubber cover. To perform an offset nulling: 1. From the Power Meter tab, press Nulling.
2. Tighten the protective cap on the power meter port, then press OK. The nulling process takes approximately 5 seconds.
37
IMPORTANT
If you revert to factory settings, you will erase all your thresholds, correction factors and reference values. To set power or loss thresholds: 1. From the Power Meter tab, press Setup. 2. From the Threshold and Correction Factor list, select the wavelength for which you want to set a threshold and a correction factor.
Thresholds list (dB, dBm, W) for each wavelength Correction factor for each wavelength
Wavelengths list
When selected, green LED: pass/ red LED: fail To revert to default values
38
FTB-200
3. Press Edit and modify thresholds for the selected wavelength. For the watt (W) threshold, select the desired order of magnitude. 4. Select the Show Pass/Fail Status with LED check box to activate the pass/fail LED on your unit. Note: Threshold values with dB, dBm or dBm/dB units will be converted to a negative value if you entered a positive value. 5. Press OK to close the dialog box, then press Exit Setup to confirm the new thresholds.
39
Wavelengths list
4. Press Reference to save the current power value as the new reference. It will appear on the right-hand corner of the data display.
40
FTB-200
41
5. Using bulkhead adapters or the system patch panels, connect a fiber under test to reference patchcord attached to the light source and power meter. 6. From the Power Meter tab, use the up/down arrows to select a wavelength. Activate the source at the same wavelength.
Wavelengths list
7. Add the displayed values to the Results list by pressing Add. 8. Repeat the procedure for other wavelengths. 9. Once the analysis is complete, press Quick Save. You can also access the Save File dialog box in the Storage window.
IMPORTANT
If you specify a name that already exists, the original file will be overwritten and only the new file will be available.
42
FTB-200
To view and edit power measurements: 1. From the Power Meter tab, press Results. All your measurements are displayed in the order they were performed. 2. Press Rename to rename the fiber or press Delete to remove the selected value from the list.
Wavelength at which power was measured Power measurement results (in dB) Reference power (in dBm) if a reference was used
Fiber number
Average power measured To change the fiber name To delete a row in the table Symbol indicating a measurement below the user-defined threshold. For more information, see Setting Thresholds and Correction Factors on page 38.
3. Press Exit Results to return to the Power Meter tab. 4. Once the analysis is complete, press Quick Save.You can also access the Save File dialog box in the Storage window. Note: If you press Add while using another measurement unit, you will have to save previous values first.
Compact Modular Platform
43
3. From the given list of files, select the file to reload. Confirm with OK. If you have already performed power measurements but not saved your work, you will be asked to save it. Then, you will be able to reload a new file afterwards. 4. To view the reloaded file, press Exit Storage. Then, from the Power Meter tab, press Results. The power measurements are displayed on the results list.
44
FTB-200
If you have already performed power measurements (but not saved them), the application will prompt you to save the current data. Select Yes to save the file. For more information on saving results, see Reloading Power Meter Results on page 44. 2. Press Exit Storage.
45
X X X
X X X X X
46
FTB-200
To create a power meter result report: 1. From the Power Meter tab, press Report. 2. Enter the relevant information.
You can save the information as a template by pressing Save as Template. 3. Press Exit Report to return to the Power Meter tab. To clear all the information from the Report window: Press Clear All, then Exit Report.
47
To print a power measurement report: 1. Connect a printer to your Compact Modular Platform. For more information, see Configuring the Printer on page 23. 2. From Power Meter tab, press Print. 3. Select the report format.
4. Press Print. You will automatically return to the Power Meter tab.
48
FTB-200
WARNING
When the VFL is active, the VFL port emits visible laser radiation. Avoid exposure and do not stare directly into the beam. Protect any unused port with a cap.
49
To activate the VFL and inspect a fiber: 1. Clean the connectors properly. 2. Connect the fiber under test to the VFL port. 3. From the Main Menu, press Power Meter, then select the VFL tab. 4. Press ON/OFF to activate the VFL.
5. Use up/down arrows to switch between blinking (1 Hz) and continuous (CW) signals 6. Without looking directly into the beam, examine the fiber. If light is coming out of the rubber jacket or on the side of the ferrule, the fiber is defective. 7. Press ON/OFF to deactivate the VFL.
50
FTB-200
IMPORTANT
If you started the application before connecting the probe to your unit, you will have to restart the application for the probe to be detected.
51
3. Connect the fiber you want to inspect to the probe. 4. Press Live Video.
To adjust brightness
To adjust contrast
5. Adjust brightness and contrast by using the sliding arrows. 6. Adjust the focus by using the focus control knob on your probe.
52
FTB-200
Capturing an Image
While you are inspecting a fiber, you can capture an image and save it on your unit as a JPEG or BMP file. You can transfer image files to a computer and add them to your reports. When you save a capture, the application suggests a file name of the form ProbeNNN (where NNN is the first unused number in the folder, starting at 000). Note: If you delete a file, its name becomes available for the next file to save. To capture an image: 1. In Live Video mode, use focus, brightness and contrast to adjust the image to your liking. 2. Press Capture.
3. Press File, then Save As and select a file name and location for your capture. 4. Return to Live Video mode by pressing Main Menu.
Compact Modular Platform
53
To view a capture: 1. Press File > Open. 2. Open the folder in which your captures are saved.
Default folder Selected capture Capture format
3. Double click on the capture you want to view. 4. Return to Live Video mode by pressing Main Menu. Repeat steps 1 to 3 to view other captures.
54
FTB-200
MM
Other models
55
Main Features
The OTDR: can be used with the FTB-400 Universal Test System (refer to FTB-400 Universal Test System user guide) and the Unit. offer impressive dynamic range with short dead zones perform quick acquisitions with low noise levels to enable accurate low-loss splice location acquire OTDR traces made of up to 128 000 points that provide a sampling resolution as fine as 4 cm include a light source and can include an optional visual fault locator
56
FTB-200
Data Post-Processing
You can install the ToolBox 6 software on a computer to view and analyze traces without having to use an and an OTDR. You can also access more features such as customized printout batch printing conversion of traces to many formats such as Telcordia or ASCII
57
1310 nm and 1550 nm. 35 dB dynamic range and 1 m event dead zone, useful to locate closely spaced events. High-resolution feature to obtain more data points per acquisition. Data points will be closer to each other, resulting in a greater distance resolution for the trace.
Four wavelengths: two multimode (850 nm and 1300 nm) and two singlemode (1310 nm and 1550 nm) in a single module. 26 dB (850 nm)/25 dB (1300 nm)/35 dB (1310 nm)/34 dB (1550 nm) dynamic range and 1 m event dead zone, particularly useful to locate closely spaced events. 4.5 m of attenuation dead zone for both singlemode and multimode. Allows tests on both 50 m (C type) and 62.5 m (D type) multimode fibers.
58
FTB-200
OTDR
Description
One, two or three wavelengths selected from the following: 1310 nm, 1490 nm, 1550 nm and 1625 nm. 38 dB dynamic range. Acquires up to 128 000 points. Optimized for metro network installation and troubleshooting, access and FTTx test applications, and inside plant testing.
40 dB dynamic range with 3 meter event dead zone. Acquires up to 52 000 data points while sampling a single trace. High-power 1310 nm, 1550 nm and 1625 nm module. 40 dB dynamic range with 3 meter event dead zone. Acquires up to 52 000 data points while sampling a single trace. Suitable for measuring B-, C-, and L-band fiber attenuation when dealing with mixed networks (1310 nm and DWDM transmission).
45 dB dynamic range (on NZDSF with a 20 s pulse) with 3 meter event dead zone. High-launch power level minimizes noise effects on signal. Acquires up to 52 000 data points while sampling a single trace. Suitable for long-range applications and recommended when measuring time is a key factor.
59
n = index of refraction of the fiber under test (as specified by the manufacturer)
60
FTB-200
An OTDR uses the effects of Rayleigh scattering and Fresnel reflection to measure the fibers condition, but the Fresnel reflection is tens of thousands of times greater in power level than the backscatter. Rayleigh scattering occurs when a pulse travels down the fiber and small variations in the material, such as variations and discontinuities in the index of refraction, cause light to be scattered in all directions. However, the phenomenon of small amounts of light being reflected directly back toward the transmitter is called backscattering. Fresnel reflections occur when the light traveling down the fiber encounters abrupt changes in material density that may occur at connections or breaks where an air gap exists. A very large quantity of light is reflected, as compared with the Rayleigh scattering. The strength of the reflection depends on the degree of change in the index of refraction.
Light pulses Laser diode Optical coupler OTDR port Light pulses Fiber Reflections come back to the OTDR
Returned signal Avalanche photodetector (APD) Pulse generator Set of instructions Analog-to-digital converter (A/D) Analyzed signal Microprocessor
Display
When the full trace is displayed, each point represents an average of many sampling points. You will have to zoom to see each point.
61
To install an EUI connector adapter onto the EUI baseplate: 1. Hold the EUI connector adapter so the dust cap opens downwards.
3 2
3. Insert the connector adapter into the baseplate.
2. Close the dust cap in order to hold the connector adapter more firmly.
4. While pushing firmly, turn the connector adapter clockwise on the baseplate to lock it in place.
63
IMPORTANT
To ensure maximum power and to avoid erroneous readings: Always clean fiber ends as explained below before inserting them into the port. EXFO is not responsible for damage or errors caused by bad fiber cleaning or handling. Ensure that your patchcord has appropriate connectors. Joining mismatched connectors will damage the ferrules. To connect the fiber-optic cable to the port: 1. Clean the fiber ends as follows: 1a. Gently wipe the fiber end with a lint-free swab dipped in isopropyl alcohol. 1b. Use compressed air to dry completely. 1c. Visually inspect the fiber end to ensure its cleanliness. 2. Carefully align the connector and port to prevent the fiber end from touching the outside of the port or rubbing against other surfaces. If your connector features a key, ensure that it is fully fitted into the ports corresponding notch. 3. Push the connector in so that the fiber-optic cable is firmly in place, thus ensuring adequate contact. If your connector features a screwsleeve, tighten the connector enough to firmly maintain the fiber in place. Do not overtighten, as this will damage the fiber and the port. Note: If your fiber-optic cable is not properly aligned and/or connected, you will notice heavy loss and reflection.
64
FTB-200
Variable part increases until it reaches the highest possible value with the selected number of digits (e.g., 99 for 2 digits), then restarts at 0.
Variable part decreases until it reaches 0, then restarts at the highest possible value with the selected number of digits (e.g., 99 for 2 digits).
By setting the default name and number of the first trace to be stored, all subsequent traces will be stored with the same name and incremental number structure. This function is particularly useful when working in Template mode or when testing ribbon fibers.
65
To configure the automatic file naming: 1. From the button bar, press Storage. 2. From the Storage dialog box, select the File Autonaming button. 3. From the Autonaming Setup dialog box, set the parameters.
If you want the variable part to increase each time a file is saved, select Increment. If you want it to decrease, select Decrement. 4. Press OK to confirm your new settings.
66
FTB-200
67
Once the acquisition is complete or interrupted, the analysis starts for acquisitions of 5 seconds or more. After analysis, the trace is displayed and events appear in the events table.
Trace display
Event pane
The application will also display status messages if you have selected to display pass/fail messages (see Setting Pass/Fail Thresholds on page 86). You can save the trace after analysis. If former results have not been saved yet, the application prompts you to save them before starting a new acquisition.
68
FTB-200
To acquire traces in Auto mode: 1. Clean the connectors properly. 2. Connect a fiber to the OTDR port. If your OTDR supports singlemode and multimode wavelengths, ensure that you connect the fiber to the appropriate port (SM or MM), depending on the wavelength you intend to use.
CAUTION
Never connect a live fiber to the OTDR port. Any incoming signal greater than 30 dBm will affect the OTDR acquisition and could damage the OTDR permanently. 3. Set the autorange acquisition time (see Setting the Autorange Acquisition Time on page 77).
4. If desired, activate the fault finder features (see Activating or Deactivating the Fault Finder Features on page 71). Note: You do not need activate the fault finder features if you have activated them in a previous test session. 5. Go to the OTDR tab. If your OTDR supports singlemode and multimode wavelengths, specify the desired fiber type (for C fiber, select 50 m and for D fiber, select 62.5 m).
69
6. Select the boxes corresponding to the desired test wavelength(s). You must select at least one wavelength. 7. If you want to clear the settings the OTDR has determined to start with a new set of OTDR settings, press Reset. 8. Press Start or from the keypad.
9. Once the analysis is complete, save the trace by pressing Quick Save in the button bar or from the keypad. 9a. If necessary, change the folder to which the file will be saved by pressing the Location button. 9b. If necessary, specify a file name.
IMPORTANT
If you specify the name of an existing trace, the original file will be overwritten and only the new file will be available. Press OK to confirm. Note: You cannot save the results if you deactivated the storage and print features (see Activating or Deactivating the Fault Finder Features on page 71).
70
FTB-200
71
73
Although the application sets the acquisition parameters, you can modify these values as needed, even while the acquisition is in progress. The OTDR simply restarts the averaging each time a modification is made. Note: You can interrupt the acquisition at any time. The application will display the information acquired to that point. Once the acquisition is complete or interrupted, the analysis starts for acquisitions of 5 seconds or more. After analysis, the trace is displayed and events appear in the events table.
Trace display
Event pane
The application will also display pass/fail messages if you have selected this option. For more information, see Setting Pass/Fail Thresholds on page 86. You can save the trace after analysis. If former results have not been saved yet, the application prompts you to save them before starting a new acquisition.
74
FTB-200
To acquire traces: 1. Clean the connectors properly. 2. Connect a fiber to the OTDR port. If your OTDR supports singlemode and multimode wavelengths, ensure that you connect the fiber to the appropriate port (SM or MM), depending on the wavelength you intend to use.
CAUTION
Never connect a live fiber to the OTDR port. Any incoming signal greater than 30 dBm will affect the OTDR acquisition and could damage the OTDR permanently. 3. If you want the application to provide automatic acquisition values, set the autorange acquisition time (see Setting the Autorange Acquisition Time on page 77). 4. If you want to set your own IOR (group index), RBS coefficient or Helix factor, see Setting the IOR, RBS Coefficient and Helix Factor on page 78. 5. If you want to test in high resolution, simply select the option (see Enabling the High-Resolution Feature on page 84). 6. Go to the OTDR tab. If your OTDR supports singlemode and multimode wavelengths, specify the desired fiber type (for C fiber, select 50 m and for D fiber, select 62.5 m).
75
7. Select the boxes corresponding to the desired test wavelength(s). You must select at least one wavelength. 8. Select the desired distance, pulse and time values. For more information, see Setting Distance Range, Pulse Width and Acquisition Time on page 80. 9. Press Start or from the keypad.
10. Once the analysis is complete, save the trace by pressing Quick Save in the button bar or from the keypad. 10a.If necessary, change the folder to which the file will be saved by pressing the Location button. 10b.If necessary, specify a file name.
IMPORTANT
If you enter the name of an existing trace, the original file will be replaced with the new file. Press OK to confirm.
76
FTB-200
77
78
FTB-200
To set the IOR, RBS and Helix factor parameters: 1. From the button bar, press OTDR Setup. 2. From the OTDR Setup window, go to the Acquisition tab. 3. Use the up or down arrow located on the side of the wavelength box to select the desired wavelength.
Wavelength for which RBS and IOR will be defined Index of refraction Rayleigh backscatter coefficient
IMPORTANT
Change the default RBS coefficient only if you have values provided by the fiber manufacturer. If you set this parameter incorrectly, your reflectance measurements will be inaccurate. 4. Select the default settings by pressing Default. When the application prompts you, answer Yes only if you want to apply the new settings to all wavelengths. OR Enter your own values in the appropriate boxes, for each available wavelength. Note: You cannot define a different Helix factor for each wavelength. This value takes into account the difference between the length of the cable and the length of the fiber inside the cable; it does not vary with wavelengths. 5. Press Exit OTDR Setup.
Compact Modular Platform
79
80
FTB-200
Time: corresponds to the acquisition duration (period during which results will be averaged). Generally, longer acquisition times generate cleaner traces (this is especially true with long-distance traces) because as the acquisition time increases, more of the noise is averaged out. This averaging increases the signal-to-noise ratio (SNR) and the OTDRs ability to detect small events. The time settings will also determine how the timer displayed in the toolbar counts time during testing. Note: If you deactivate the Same Time Value for all Wavelengths option, the Time dial is replaced by boxes (one per wavelength). If the predefined values do not suit your needs, you can customize one or all of them. For more information, see Customizing the Acquisition Time Values on page 105. In addition to the displayed values, the following time modes are available: Real: used to immediately view changes in the fiber under test. In this mode, the SNR of the trace is lower and the trace is refreshed instead of averaged until you press Stop. You can alternate between real mode and averaging time interval mode while an acquisition is in progress. Note: You can only use one wavelength at a time to monitor your fiber in real time mode. Auto: the application will use the autorange acquisition time that you have previously defined (see Setting the Autorange Acquisition Time on page 77). It will also evaluate the fiber type and length and set the acquisition parameters accordingly. You can use the same distance range, pulse width and acquisition time parameters for testing at all wavelengths on a multiwavelength OTDR.
81
To set the parameters: From the OTDR tab, Press the dial corresponding to the parameter you wish to set (the selection marker will move clockwise) or use the selection dial located on the front of the Unit. OR Press directly the value to select it. The selection marker will go to that value immediately.
Selection marker
If you want the application to provide automatic acquisition values, move at least one dial to the Auto position. The other dials are automatically set accordingly. Note: If your OTDR supports singlemode and multimode wavelengths, settings would be applied to either singlemode or multimode wavelengths, depending on the selected fiber type (same settings for 50 m and 62.5 m).
82
FTB-200
To use the same pulse and acquisition time for all wavelengths: 1. From the button bar, press OTDR Setup, then go to the Acquisition tab. 2. Select the Same pulse for all wavelengths box and/or the Same time for all wavelengths box.
When a particular option is selected, the corresponding dial (Pulse or Time) appears on the OTDR tab. When it is not, list boxes for each available test wavelength appear instead.
83
Note: If your OTDR supports singlemode and multimode wavelengths, the high-resolution feature will be activated either for the singlemode or multimode wavelengths, depending on the selected fiber type.
84
FTB-200
Note: By default, traces are automatically analyzed as they are acquired. 4. Press Exit OTDR Setup to return to the main window.
85
Splice and connector loss (dB) Reflectance (dB) Fiber section attenuation (dB/km)
86
FTB-200
Once the thresholds are set, the application will be able to perform Pass/Fail tests to determine the status of the various events (pass, warning, fail). The Pass/Fail test is performed on two occasions: when analyzing or reanalyzing a trace when you open a trace file The application displays asterisks to mark events for which the measured value is greater than the predefined thresholds in the events table. The Pass/Fail threshold LED, located on the front of the unit, will also indicate the status (green for pass, red for fail). You can also set the application to display pass/fail messages when the Pass/Fail test is performed. To set pass/fail thresholds: 1. From the button bar, select OTDR Setup, then the Event Table tab. 2. Select the Mark faults in event table box. The other boxes become available.
3. Enter the desired values in the appropriate fields. 4. If you want the application to display messages when events fail the test, select Display Pass/Fail Message. 5. Press Exit OTDR Setup to return to the main window.
Compact Modular Platform
87
88
FTB-200
To change the default span start and span end for traces: 1. From the button bar, press OTDR Setup. 2. From the OTDR Setup window, go to the Analysis tab. 3. If you want to set the span start and end with a distance value, under Span start and Span end, select the Set by distance option. Go to the Position box and enter the desired value, using the distance unit displayed to the right of the field.
Under Span end, select the option indicating whether the span end position is from the fiber span start or from the end of the fiber. OR If you want to set the span start and end on a particular event, under Span start and Span end, select the Set on event option. From the Event number field, use the up or down arrow to select the number of the event that you want to designate as span start or span end. The span event parameters are applied to all newly acquired traces.
89
Template Principle
Cables contain numerous fibers. Theoretically, on all these fibers, you will find the same events at the same location (due to connectors, splices, etc.). Template mode allows you to test these fibers one after the other quickly and efficiently and ensures that no event remains undetected. The Template mode concept is to acquire a reference trace (template), add information and comments on the current job, then save the trace. For a more accurate reference trace, you can update it with new events that may occur during the first acquisitions (up to fifteen). The test application will flag possible problems and discrepancies between the reference trace and other traces. Each new acquisition will be compared to the reference trace and the software will mark and measure any missing event. If the reference trace was createdwith the ToolBox software on an FTB-400 Universal Test System or a computer, the event-related comments inserted in the reference trace, as well as the reference trace report, are automatically copied to subsequent traces. Note: You cannot add comments to events or to a reference trace. You can save the trace after analysis. If former results have not been saved yet, the application prompts you to save them before starting a new acquisition. Template mode can be used on an unlimited number of traces, as long as you have at least one reference trace. Thus, you can use Template mode to automate trace acquisition.
91
Pulse width
Must be:
Reference trace pulse Current trace pulse ------------------------------------------------- 4
OR
Current trace pulse ( Reference trace pulse 4 )
Pulse width
OR
Reference trace pulse ( Current trace pulse 4 )
92
FTB-200
Item
To be valid...
Compare singlemode traces with singlemode traces. Compare multimode traces with multimode traces. Traces must have at least two events (span start and span end) and a fiber section. Reference trace must not be acquired in Real mode (see Setting Distance Range, Pulse Width and Acquisition Time on page 80).
Wavelengths Reference wavelengths and subsequent (or reloaded) traces wavelengths must be identical.
When you process traces using an OTDR, you acquire the traces as you go along. When you process traces on a computer, you use traces stored on disk; therefore, applying the span length is optional.
93
CAUTION
Never connect a live fiber to the OTDR port. Any incoming signal greater than 30 dBm will affect the OTDR acquisition and could damage the OTDR permanently. 1. Acquire a trace in Auto or Advanced test mode. If you want to test using high resolution, you will have to select this option before acquiring the reference trace. For more information, see Testing Fibers in Auto Mode on page 67 or Testing Fibers in Advanced Mode on page 73. 2. If desired, document the results (see Documenting Results on page 159). 3. If necessary, define the span start and end (see Analyzing the Fiber on a Specific Fiber Span on page 141). 4. Once the analysis is complete, save the trace by pressing Quick Save in the button bar or from the keypad.
Note: For easier management, you can name the reference trace as the cable name and set the autonaming function to include both the cable name and fiber number (for more information, see Naming Trace Files Automatically on page 65).
94
FTB-200
CAUTION
Never connect a live fiber to the OTDR port. Any incoming signal greater than 30 dBm will affect the OTDR acquisition and could damage the OTDR permanently. 2. When the application prompts you, select the trace you want to use as the reference trace. If you do not select it immediately, you will have to select it manually before starting your test (see Selecting a Reference Trace on page 101).
95
3. Set test parameters. 3a. From the button bar, press OTDR Setup. 3b. Select the Create Ref./Template tab.
3c. If necessary, select Create reference trace to update your reference trace for the next acquisitions. This mode will use the first 15 traces (or less, if you decide to stop the process manually) to continue compiling events and updating the previous traces accordingly. Note: You can disable the mode by clearing the Create reference trace box between two acquisitions.
96
FTB-200
IMPORTANT
Once the first 15 acquisitions have been performed, or if you stop the reference update manually, the only way to reactivate it will be to close the application and start a new acquisition in Template mode. 3d. Set the Template mode option you want to use on the current trace acquisition: Consider only the events already indicated on the reference trace and ignore any other event occurring on the current trace. Keep all the events on the current trace, whether they are on the reference trace or not. You can delete these events later. Confirm, for each newly detected event, if this event will be deleted or kept on the current trace. 3e. Press Exit OTDR Setup to return to main window.
97
4. If you selected Create reference trace at step 3c, update your reference trace as follows: 4a. Press Start or from the keypad. Events from all traces will automatically be analyzed and measured. 4b. The application will prompt you when new events are found. For each of the newly detected events, specify if the event will be: added to the reference trace. The application will update all previous acquisitions with the new information. For example, if an event occurred on the sixth acquisition, the application would update traces 1 through 5. deleted from the current trace kept on the current trace (but not copied to previous or future traces because it is not transferred to reference trace) Note: You can only add events to the reference trace during reference update. Note: If you chose the Keep all events option for the acquisitions that will be performed after the update, you may find useful to add newly detected events to obtain a more accurate reference trace. Note: Previous traces will only be updated if you select the Add event to template trace option.
98
FTB-200
4c. Once the analysis is complete, save the trace by pressing Quick Save in the button bar or from the keypad. If necessary, change the folder to which the file will be saved by pressing the Location button. If necessary, specify a file name.
IMPORTANT
If you specify the name of an existing trace, the original file will be replaced with the new file will be available. Press OK to confirm. 4d. Repeat steps 4a to 4c as necessary to update your reference trace. 5. Once the reference update is complete (or if you did not select the reference update), the application automatically switches to Template mode. New events will be managed according to the option you selected at step 3d. Perform acquisitions in Template mode as follows: 5a. Press Start or from the keypad.
5b. If you selected the Display delete/keep confirmation message for each newly detected event option, the application will prompt you when new events are found. For each of the newly detected events, specify if the event will be: deleted from the current trace kept on the current trace
99
5c. Once the analysis is complete, save the trace by pressing Quick Save in the button bar or from the keypad. If necessary, change the folder to which the file will be saved by pressing the Location button. If necessary, specify a file name.
IMPORTANT
If you specify the name of an existing trace, the original file will be replaced with the new file will be available. Press OK to confirm. 5d. Repeat steps 5a to 5c as necessary.
100
FTB-200
2. If necessary, select the storage location from where you want to open the file. 3. Select the file to be used as a reference and press OK. The application opens the selected trace file automatically.
101
103
To customize the distance range values: 1. From the button bar, select OTDR Setup, then the Acquisition tab. 2. Press the Customize Acquisition Parameters button.
3. If your OTDR supports singlemode and multimode wavelengths, specify the desired fiber type.
4. From the Distance list, select the value you want to modify (the value will become highlighted), then press the Edit button. Note: You can revert to factory values by pressing the Default button. 5. In the displayed dialog box, enter the new value and confirm with OK.
104
FTB-200
Note: The Auto and Real values cannot be modified. You can customize the acquisition time to improve the signal-to-noise ratio (SNR) of the trace and enhance the detection of low-level events. The SNR improves by a factor of two (or 3 dB) each time the acquisition time is increased by a factor of four.
105
To customize the acquisition time values: 1. From the button bar, select OTDR Setup, then the Acquisition tab.
2. From the Time list, select the value you want to modify (the value will become highlighted), then press the Edit button. Note: You can revert to factory values by pressing the Default button.
3. In the displayed dialog box, enter the new value and confirm with OK.
106
FTB-200
107
To open a trace file: 1. From the button bar, press Storage, then Open File.
2. If necessary, change the location to retrieve the file that has been stored. 3. Scroll through the list of files and select a trace file to open. 4. If you are in Advanced mode, press the Select as Main Trace or Select as Reference Trace button to indicate whether the selected trace will be used as the main or the reference trace. You can select another file from the list and set the trace as the main or reference trace, according to your needs. 5. Press OK. You return to the Storage dialog box. If you had already acquired (but not stored) a trace, the application prompts you to save the current trace (even if the trace is hidden). Press Yes to store the trace. You can now open another trace file. 6. If necessary, specify which trace(s) should be displayed. For more information, see Displaying or Hiding a Trace on page 121. 7. Press Close.
108
FTB-200
Distance units
Events table
Scroll buttons
Some items in the trace display are always visible, while others will appear only if you choose to display them or when you move from one pane or another. The blue rectangle on the Y axis (relative powers) indicates the proper injection level range for the defined test pulse. Once the trace is acquired, you can change trace display parameters (such as the grid and zoom window display). For more information, see Setting Trace Display Parameters on page 116.
109
You can view all of the traces, in turn, in both the Trace Info pane and the trace display with the navigation buttons. For more information, see Displaying or Hiding a Trace on page 121. When more than one trace is opened in the OTDR test application, each trace is displayed in a different color. The colors are assigned dynamically depending on the order in which the traces have been opened into the OTDR application. The contents of the graph area changes according to the selected tab. Events tab: The application shows marker A or markers A and B on the graph. These markers pinpoint an event or a fiber section, depending on what is selected in the events table. You can move markers directly by selecting an event in the events table or on the graph. You can also drag markers from one location to another on the graph. The magnifying glass button is displayed in the bottom right corner of the Events tab; it allows you to zoom in on an event selected in the events table. The Zoom window will not appear in the trace display when the Events tab is selected.
110
FTB-200
Measure tab: The application shows two, three or four markers: a, A, B, and b, depending on which button you select from the Results section. These markers can be repositioned along the trace to calculate loss, attenuation, reflectance, and optical return loss (ORL). You can reposition all markers by using the controls in the Markers section. You can drag them directly from the trace display. You can also use from the keypad to select the desired marker and move it with the selection dial located on the front of the unitUnit. Selecting marker A or B will move the a-A or B-b pair. The zoom window will appear in the trace display when the Measure tab is selected. Trace Info. tab: The information about all the trace files (including the reference) can be displayed. The events table lists all the events detected on the fiber. An event can be defined as the point at which change in the transmission properties of light can be measured. Events can consist of losses due to transmission, splices, connectors or breaks. If the event is not within the established thresholds, it is a fault.
If you press and hold the row corresponding to a specific event for a few seconds, the application will display the name of this event.
111
For each event listed in the events table, information is displayed: Type: Various symbols are used to describe different event types. For a more detailed description of symbols, see Description of Event Types on page 169. Number: Event number (a sequential number assigned by the OTDR test application) or, in parentheses, the length of a fiber section (the distance between two events). Loc.: Location; that is, distance between the OTDR and the measured event or between the event and the beginning of the fiber span. Loss: Loss in dB for each event (calculated by the application). Refl.: Reflectance measured at each reflective event along the fiber. Att.: Attenuation (loss/distance) measured for each fiber section. Cumul.: Cumulative loss from the trace span start to span end; the running total is provided at the end of each event and fiber span. Cumulative loss is calculated for the events displayed in the events table, excluding those that are hidden. For a more accurate link loss value, refer to the loss measurement displayed in the Trace Info. tab.
112
FTB-200
113
Including span loss and span end: When applicable, the application will include the losses caused by the span start and span end events in the displayed values.
114
FTB-200
If you activated the pass/fail test (see Setting Pass/Fail Thresholds on page 86), span-start and span-end events will be taken into account when determining the status (pass/fail) of splice and connector loss and reflectance. To customize the events table appearance: 1. From the OTDR Setup window, select the Event Table tab. 2. Select the boxes corresponding to the item you want to display or include in the table. OR To hide them, clear the boxes.
115
Grid
116
FTB-200
To set the trace display parameters: 1. From the button bar, press the OTDR Setup button, then select the General tab. 2. Select the boxes corresponding to the item you want to display on the graph. OR To hide them, clear the boxes.
Changes will be applied once you exit the OTDR Setup window.
117
Measurement unit
118
FTB-200
Unit used
Note: If you select Kilometers (km) or Kilofeet (kft), m and ft may appear instead to display more precise measurements.
119
To select the measurement unit for your display: 1. From the button bar, select OTDR Setup. 2. From the OTDR Setup window, select the General tab. 3. In the Distance units section, select the option corresponding to the desired distance unit.
4. Press Exit OTDR Setup. You return to the main window and the newly selected measurement unit appears everywhere units are used.
120
FTB-200
121
To specify which traces to display or hide: 1. From the button bar, press Storage.
2. Select the box(es) corresponding to the traces to display. OR Clear the box(es) to hide them. Note: A hidden trace cannot be displayed with the navigation button. In multiwavelength trace files, you can show or hide traces independently. From the list of traces, select the row corresponding to the trace you want to set as the current trace (the row will become highlighted) and press the Set as Active Trace button. The trace will turn black in the display to indicate that it was selected. Note: In Template mode, since only one trace can be selected at a time in multiwavelength trace files, the Set as Active Trace button is not available.
122
FTB-200
3. Press Close to return to the main window. You can now acquire a new trace. For more information, see Testing Fibers in Advanced Mode on page 73.
123
124
FTB-200
125
To zoom in on the trace (Advanced and Template modes): 1. Press the button. 2. Use the zoom box to define the zooming area. Drag the zoom box to the desired location. Note: You can move the zoom box outside of the area shown in the trace display, but not outside of the trace display boundaries. Drag the zoom box handles to delimit the desired zoom area.The coordinates are displayed in the lower portion of the trace display. Note: You can zoom in on the horizontal and vertical scale independently. Note: If you define the zoom area to the maximum permitted value and try to zoom in, the application will automatically zoom out instead. 3. Press OK to zoom in or Cancel to exit the zoom function. To zoom out of a trace (Advanced and Template modes): Simply press the button as many times as needed. To revert to the complete graph view (Advanced and Template modes): Press the button. To automatically zoom in on the selected event: 1. Go to the Events tab. 2. From the events table, select the desired event. 3. Press the button to zoom in. Press the button again to zoom out.
126
FTB-200
Note: Even if more than one trace is available, the Trace Info. tab only shows one at a time. To display the traces in turn, press Next Trace in the toolbar. The active trace appears in black in the trace display.
127
These parameters are displayed: Wavelength: Test wavelength and type of fiber used: 9 m (singlemode) or 50 m/62.5 m (multimode). Pulse: Pulse width used to perform the acquisition. Time: Duration (either in minutes or seconds) of the acquisition. Span length: Measured length of the total fiber span between span start and span end. Total loss: Total measured loss of the fiber between span start and span end. Average loss: Average loss of the total fiber span, indicated as a function of distance. Average Splice Loss: Average of all non-reflective events between span start and span end. Max. splice loss: Maximum loss of all non-reflective events between span start and span end. Total ORL: ORL calculated between the span start and the span end.
128
FTB-200
High resolution: High-resolution option was selected to perform the acquisition. For more information, see Enabling the High-Resolution Feature on page 84. Helix factor: Helix for the displayed trace. If you modify this parameter, the trace distance measurements will be adjusted. IOR: Refraction index of the displayed trace, also known as group index. If you modify this parameter, the distance measurements for the trace will be adjusted.You can enter an IOR value directly or let the application calculate it with the distance between span start and span end you provide. Backscatter: Rayleigh backscatter coefficient setting of the displayed trace. If you modify this parameter, the reflectance and ORL measurements for the trace will be adjusted. Splice detection: Current setting for detecting small non-reflective events during trace analysis. Refl. detection: Current setting for detecting small reflective events during trace analysis. End-of-fiber det.: Current setting for detecting important event loss that could compromise signal transmission during trace analysis.
129
To modify the IOR, RBS coefficient and Helix factor parameters: 1. From the main window, select the Trace Info. tab.
Press the Fiber Settings button. 2. Enter the desired values for the current trace in the appropriate boxes. OR If you want to revert a particular item to its default value, press the Default button appearing next to this item.
130
FTB-200
If you already know the IOR value, you can enter it in the corresponding box. However, if you prefer to let the application calculate the IOR value as function of the distance between span start and span end, press Set IOR by Distance, then enter the distance value. Note: Except for the fiber type, modifications you make will only be applied to the current trace (that is, to a particular wavelength), not to all traces. You can change the fiber type of a multimode trace. The application will adjust the fiber type of all multimode wavelengths (traces). Unless you are absolutely sure of the different parameter values, revert to default values to avoid fiber setting mismatches. You should do the same for other multimode wavelengths. Press OK to apply the changes. You return to the main window.
131
Inserting Events
At any time, you can insert an event in the events table manually. This could be useful, for example, if you know that there is a splice at a given location, but the analysis does not detect it because it is hidden in the noise or because the splice loss is lower than the minimum detection threshold (see Setting Pass/Fail Thresholds on page 86). You can add this event to the events table manually. This will add a number on the trace at the location of the insertion, but it will not modify the trace.
IMPORTANT
Inserted events are removed when you reanalyze a trace. To insert an event: 1. From the Events tab, press Add New Event.
132
FTB-200
Four markers are available to measure the inserted event, but only marker A identifies where the event will be. Use the marker arrows to move marker A on the trace display. 3. Once you have determined the location, under Event, use the up/down arrows next to the box to select the desired event type.
4. Press OK to insert the event or Cancel to return to the events table without making any changes.
133
Deleting Events
Note: This function is available in Advanced mode only. Almost any event can be deleted from the events table, except: end of analysis fiber section launch level end of fiber span start span end Note: The End-of-fiber event indicates the span end that was set for the first analysis of the trace, not the span end assigned to another event or distance from the span end in the Analysis tab.
IMPORTANT
The only way to recover deleted items is to reanalyze the trace, as you would for a new trace. For more information, see Analyzing or Reanalyzing a Trace on page 139.
134
FTB-200
To delete an event: 1. Locate the event you want to delete (see Locating Events in the Trace Display and Events Table on page 113).
2. Select Delete. When the application prompts you, press Yes to confirm the deletion, or No to keep the event.
135
IMPORTANT
The end-of-fiber (EoF) threshold that you define will be used in Automatic mode and in Advanced mode if you let the application evaluate the acquisition settings. If you set this threshold, an EoF event will be inserted at the first event for which the loss crosses the threshold. The application will then use this EoF event to determine the acquisition settings.
136
FTB-200
The following examples show how different splice-loss threshold levels can affect the number of displayed events, especially small non-reflective events such as those caused by two splices. Three traces are shown, corresponding to three threshold level settings.
Event location
Threshold at 0.05 dB With the threshold set to 0.05 dB, two events are displayed at distances corresponding to the location of the first and second splices. Threshold at 0.1 dB Only the first splice is displayed, as the threshold is set to 0.1 dB and the second splice loss is lower than 0.1 dB. Threshold at 0.15 dB The first two splices are not displayed, as the threshold is set to 0.15 dB and the first and second splice losses are lower than 0.15 dB.
137
To set the analysis detection thresholds: 1. From the button bar, press OTDR Setup. 2. From the OTDR Setup window, select the Analysis tab. 3. Under Analysis parameters, set the parameters.
Enter the desired values in the appropriate boxes. OR Select the default settings by pressing Default. 4. Press Exit OTDR Setup. The analysis detection thresholds you have just set are applied to all newly acquired traces, as well as to trace reanalysis. Note: Analysis thresholds are only saved in the trace during analysis. For traces acquired, but not yet analyzed, you can change the analysis detection thresholds in the OTDR test application before performing the analysis.
138
FTB-200
139
To analyze or reanalyze a trace: 1. From the main window, go to the Events tab. 2. Press the Analyze button. 3. From the Reanalyze Trace dialog box, select an option for setting the span start and end markers on the trace. On the first analysis, this dialog box is not displayed and the default span start and end are applied (See Setting a Default Span Start and Span End on page 88).
Keep current span delimiter positions applies the current fiber span upon trace reanalysis. Reset span delimiters positions applies the fiber span defined in the OTDR Setup upon trace reanalysis. Press OK to confirm.
140
FTB-200
141
Swapping Traces
Note: This function is available in Advanced mode only. Since the events table and the trace information are based on the main trace, you may want to interchange main and reference traces. When you swap traces, the application will provide a new set of events corresponding to the new main trace. To swap traces: 1. From the button bar, press Storage. 2. From the Storage dialog box, select Swap Main/Reference.
Note: You can change a main trace into a reference trace, and vice versa, even if only one trace is in the applications memory.
142
FTB-200
Using Markers
You can use markers to view the position and relative power of an event. Markers are available when you press Measure from the main window. To move a marker: 1. Press the markers button until it displays the desired marker. You can also use from the keypad. In addition to the a, A, B, and b markers, you can select the Trace or All options. 2. Once the appropriate marker is selected, use the right and left arrow buttons to move the marker along the trace. You can also move it with the selection dial located on the front of the Unit. If you zoom in on a trace and select the Trace option, pressing the right or left arrow moves the trace. In full-trace view, the Trace option has no effect on marker movement.
Distance between span start and A Distance between span start and B Distance between A and B Left and right arrows Power at A
Power at B
143
Note: You can also select the marker directly on the trace display and drag it to the desired position. If a marker is moved close to another, both will move together. This ensures a minimum distance is maintained between markers. A marker may disappear from the trace after you zoom in (see Using Zoom Controls on page 125). You can recall it by selecting a missing marker with the Markers button or by using one of the arrows to bring the selected marker back into the displayed area.
144
FTB-200
To get the distance to an event and the associated relative power level: 1. From the main window, select the Measure tab. 2. Move marker A to the beginning of the event. For more information about markers, see Using Markers on page 143.
145
The two fitted lines are then extrapolated toward the center of the event and the loss event is directly read from the drop in power between the two lines.
146
FTB-200
A-B LSA loss: the loss of the event bordered by the markers A and B is obtained by fitting a straight line to the backscatter data between these two markers.
The event is then obtained by the reduction in power (dB) over the distance between the two markers, as calculated from the slope of the fitted line. Although this method works fairly well for splice loss, it is clearly not appropriate for reflective events (definitely not a straight-line event). A-B LSA Loss is mainly used to rapidly compute loss over a given length of a fiber section. Note: A-B LSA event loss measurements should be used on fiber sections only. Measuring events will not yield meaningful results.
147
To get event loss: 1. From the main window, select the Measure tab. 2. In the Results section, press Loss. Markers a, A, B and b appear on the graph. 3. Zoom in and position marker A at the end of the linear area preceding the event to be measured. For more information, see Using Zoom Controls on page 125 and Using Markers on page 143. 4. Position submarker a at the beginning of the linear area preceding the event to be measured.
148
FTB-200
5. Position marker B at the beginning of the linear area following the event to be measured. 6. Position submarker b at the end of the linear area following the event to be measured.
Least-square approximation
149
150
FTB-200
To get attenuation: 1. From the main window, select the Measure tab. 2. In the Results section, press the Att. button. Markers A and B appear on the graph. 3. Place markers A and B at any two points on the trace. For more information, see Using Markers on page 143. 4. Zoom in on the trace and fine-tune the marker positioning if necessary. For more information, see Using Zoom Controls on page 125. Note: There should not be any events between markers A and B when performing the two-point attenuation measurement.
Least-square approximation
151
Getting Reflectance
Reflectance is the ratio of reflected light to input light. To get reflectance: 1. From the main window, select the Measure tab. 2. In the Results section, press the Refl. button. Markers a, A and B appear on the graph. 3. Zoom in and position marker A on the linear area preceding the event to be measured. For more information, see Using Zoom Controls on page 125 and Using Markers on page 143. 4. Position submarker a at the beginning of the linear area preceding the event to be measured. 5. Position marker B at the peak of the reflective event to be measured. Note: Using this procedure, you can measure the reflectance of all the events in a merged reflective fault event.
152
FTB-200
3. Position markers A and B to delimit the area for which you want to know the ORL value.
153
155
X Conv
156
FTB-200
ToolBox ToolBox ToolBox ToolBox FTB-100 FTB-100 FTB-100 5.5 6.5 or 6.7 to 6.21 or 2.5 or 2.6 or 2.7 2.8 or earlier 6.20 later earlier later/ FTB-150 FTB-200 ToolBox 5.5 ToolBox 6.5 or earlier ToolBox 6.7 to 6.20 ToolBox 6.21 or later FTB-100 2.2 or earlier FTB-100 2.5 FTB-100 2.6 or 2.7 FTB-100 2.8 or later/ FTB-150 FTB-200
a. b. c. d. e. f.
X X Convc Convc X X
X X X Convf,e X X X Conve,f
X X X X X X X X
Conva,d,f Conva,d,f
Should be saved in or converted to FTB-100 (.ftb100) format. Should be reanalyzed to view the events table. Data should be saved in FTB-300 (.ftb300) format and reanalyzed to view the events table. Triple-wavelength trace files are not compatible. Should be converted to ToolBox 6.7-6.20 format. Should be converted with ToolBox 6.21 or later.
157
158
FTB-200
Documenting Results
After acquiring a trace, you might want to include or update information about the tested fiber and job or add comments. The information you enter is saved only for the currently open trace file. Note: The information must be entered before acquiring traces in Template mode. For more information, see Testing Fibers in Template Mode on page 91. After entering the required data, you may save the contents as a template. The next time you access the report to document a newly acquired trace, the template is automatically recalled, eliminating repetitive documentation operations. Some of the information is common to all wavelengths (location A and B, cable ID and fiber ID). Some other is specific to the current wavelength (job ID, customer and comments). If you clear information from the Report window, both the common and the specific information will be deleted. The information specific to other wavelengths will not be deleted (you must delete it manually).
159
To document results: 1. From the button bar, once a trace has been acquired or reopened, press Report. 2. Enter the desired information.
Note: The information in the Date, Time, Unit and Serial no. boxes is provided by the application and cannot be edited. You can edit the Fiber ID only if the Use autonaming option is not selected. Note: If you select the Use autonaming box, the Fiber ID box becomes unavailable. If you want to save the contents as a template, use the Save as Template button. 3. Press Exit Report to return to the trace display. The information entered is saved with the trace and can be viewed or changed at any time using the same process.
160
FTB-200
To clear all the information from the Report window: Press the Clear All button. Note: The information appearing in the Date, Time, Unit and Serial no. boxes cannot be deleted. The Fiber ID can only be deleted if the Use autonaming option is not selected.
161
Printing a Report
You can print trace reports directly from your unit. By default, only the information related to the active trace is printed in a report, but you can select an option to print all the traces the current file contains (available in Advanced mode only). You can print two types of reports: summarized and detailed. The following table shows the various items that can appear on a report, depending on the report type you choose:
Item appearing on the report Summarized Detailed
Cable information (fiber ID, cable ID, location A and B) Link measurement (link length and loss, average loss, splice loss and total ORL) Test and cable setup for main and reference traces (file name, OTDR model, software version, wavelength, distance, refractive index, RBS, acquisition time, pulse width and helix factor) Events table (with fiber sections) Events table (without fiber sections) Trace Job information (test date and time, unit serial and model numbers, job and customer ID) Comments Marker information (a, A, b, B, and A to B distances, as well as A to B attenuation, loss and ORL). Available only if you select the option to include markers Zoom (traces will be printed with the zoom factor you selected). Available only if you select the option to include zoom
X X X
X X X
X X X X X X X
162
FTB-200
You can include zoom and/or markers in your report. There are two options for zoom: Manual zoom: Graphs will be printed exactly as they appear on screen. The same zoom factor will be applied to all traces (wavelengths) of a particular file. Zoom on selected event: Graphs will be printed with zoom on the area corresponding to the selected event (one event per trace, i.e. per wavelength).
163
To print reports: 1. From the button bar, press Print. 2. From the Print dialog box, select the report options: Report format Desired zoom Markers Select the Print all traces check box to print all traces (wavelengths) from the current file (option available in Advanced mode only)
Note: In Automatic mode, the trace report that prints is always the summarized one. The report format options are not displayed. 3. Select Print to launch the process. You will automatically return to the main window.
164
FTB-200
CAUTION
Never connect a live fiber to the OTDR port. Any incoming signal greater than 30 dBm will affect the OTDR acquisition and could damage the OTDR permanently.
165
To use your Optical Time Domain Reflectometer as a source: 1. Clean the connectors properly (see Cleaning and Connecting Optical Fibers on page 64). 2. Connect one end of the fiber under test to the OTDR port. If your OTDR supports singlemode and multimode wavelengths, ensure that you connect the fiber to the appropriate port (SM or MM), depending on the wavelength you intend to use. 3. From the main window, go to the Source/VFL tab.
4. Select the wavelength you want to use. Note: If only one wavelength is available, it is selected by default.
166
FTB-200
5. Select the desired modulation. Under Modulation, For loss measurement, with a power meter at the other end, select Continuous. For fiber identification, select 1 kHz or 2 kHz. This will allow the person at the other end of the link to identify the fiber under test, which could be particularly useful when working with cables containing many fibers. For easier fiber identification, the application also offers a flashing pattern. If you select this option, the modulated signal (1 KHz or 2 KHz) will be sent for 1 second, then will be off for the next second, then be sent again for 1 second, and so on. If you want the OTDR to emit light in a flashing pattern, select 1 kHz+Blink or 2 kHz+Blink. 6. Under Source, press Turn ON. You can stop light emission at any time by pressing Turn OFF. Using an EXFO power meter with tone-detection features, such as the FOT-930 or FPM-300, an operator at the other end will be able to quickly locate the correct fiber or perform loss measurements. Refer to the power meter user guide for details.
167
To identify fiber faults visually: 1. Clean the connectors properly (see Cleaning and Connecting Optical Fibers on page 64). 2. Connect the fiber under test to the VFL port. 3. From the main window, go to the Source/VFL tab. 4. Select Continuous to use the VFL with continuous output or Blink to use the VFL with 1 Hz pulsed output.
5. Under VFL, press Turn ON to send the VFL signal. You can stop the VFL signal emission at any time by pressing Turn OFF.
168
FTB-200
Span Start
The Span Start of a trace is the event that marks the beginning of the fiber span. By default, the Span Start is placed on the first event of a tested fiber (typically the first connector of the OTDR itself). You can make another event the start of the span you want to focus your analysis on. This will set the beginning of the events table at a specific event along the trace.
Span End
The Span End of a trace is the event that marks the end of the fiber span. By default, the Span End is placed on the last event of a tested fiber, and is called the end-of-fiber event. You can also make another event the end of the span you want to focus your analysis on. This will set the end of the events table at a specific event along the trace.
169
Continuous Fiber
This event indicates that the selected acquisition range was shorter than the fiber length. The fiber end was not detected because the analysis process ended before reaching the end of the fiber. The acquisition distance range should therefore be increased to a value greater than the fiber length. There is no loss or reflectance specified for continuous fiber events.
170
FTB-200
End of Analysis
This event indicates that the pulse width used did not provide enough dynamic range to get to the end of the fiber. The analysis ended before reaching the end of the fiber because the signal-to-noise ratio was too low. The pulse width should therefore be increased so the signal reaches the end of the fiber with a sufficient signal-to-noise ratio. There is no loss or reflectance specified for end-of-analysis events.
171
Non-Reflective Event
This event is characterized by a sudden decrease in the Rayleigh backscatter signal level. It appears as a discontinuity in the downward slope of the trace signal. This event is often caused by splices, macrobends, or microbends in the fiber. A loss value is specified for non-reflective events. There is no reflectance specified for this type of event. If you set thresholds, the application indicates a non-reflective fault in the events table, whenever a value exceeds the loss threshold (see Setting Pass/Fail Thresholds on page 86).
172
FTB-200
Reflective Event
Reflective faults appear as spikes in the fiber trace. They are caused by an abrupt discontinuity in the index of refraction. Reflective events cause a significant portion of the energy initially launched into the fiber to be reflected back toward the source. Reflective events may indicate the presence of connectors, mechanical splices, or even poor-quality fusion splices or cracks. A loss and a reflectance value are normally specified for reflective events. When the reflective spike reaches the maximum level, its top may be clipped due to the saturation of the detector. As a result, the dead zoneor minimum distance for making a detection or attenuation measurement between this event and a second nearbymay be increased. If you set thresholds, the application indicates a reflective fault in the events table, whenever a value exceeds reflectance and/or connector loss threshold(s) (see Setting Pass/Fail Thresholds on page 86).
173
Positive Event
This event indicates a splice with an apparent gain, due to the junction of two fiber sections having different fiber backscatter characteristics (backscatter and backscatter capture coefficients). A loss value is specified for positive events. The loss specified does not indicate the true loss of the event. The true loss has to be measured by performing bidirectional fiber measurements and bidirectional analysis.
174
FTB-200
Launch Level
This event indicates the level of the signal launched into the fiber. The figure above shows how the launch level is measured. A straight line is plotted using least-square approximation to fit all trace points in the linear area between the first and second detected events. The straight line is projected toward the Y (dB) axis until it crosses the axis. The crossing point indicates the launch level. <<<< in the events table indicates that the launch level is too low.
175
Fiber Section
This symbol denotes a fiber section with no event. The sum of all fiber sections contained in an entire fiber trace equals the total fiber length. Detected events are distincteven if they cover more than one point on the trace. A loss value is specified for fiber section events. No reflectance is specified for this type of event. The attenuation (dB/distance) is obtained by dividing the loss by the fiber section length.
176
FTB-200
Reflective Faults
This symbol denotes a reflective event combined with one or more other reflective events. It also indicates the total loss produced by the merged reflective events following it in the events table. A Merged Reflective Event is composed of reflective events. Only the Merged Reflective Event is displayed in the events table, not the reflective subevents composing it. Reflective events may indicate the presence of connectors, mechanical splices, or poor-quality fusion splices or cracks. A reflectance value is specified for all merged reflective events and indicates the maximum reflectance for the merged event. A reflectance value is also displayed for each subevent composing the Merged Reflective Event.
177
The total loss ( dB) produced by the events is measured by plotting two straight lines. The first line is plotted by fitting, through least-square approximation, trace points in the linear area preceding the first event. The second line is plotted by fitting, through least-square approximation, trace points in the linear area following the second event. If there were more than two merged events, this line would be plotted in the linear area following the last merged event. This line is then projected toward the first merged event. The total loss ( dB) equals the power difference between the point where the first event begins (point A) and the point on the projected straight line located just below the first event (point B). No loss value can be specified for the subevents.
178
FTB-200
Echo
This symbol indicates that a reflective event has been detected after the end of the fiber. In the example above, the launched pulse travels up to the end connector and is reflected back toward the OTDR. Then, it reaches the second connector and is reflected again toward the end connector. It is then reflected back to the OTDR. The application interprets this new reflection as an echo because of its characteristics (reflectance and particular position with respect to other reflections). The distance between the second connector reflection and the end connector reflection is equal to the distance between the end connector reflection and the echo. There is no loss specified for echo events.
179
This symbol indicates a reflective event that can be a real reflection or an echo produced by another stronger reflection located closer to the source. In the example above, the launched pulse hits the third connector, is reflected back to the OTDR and reflected again into the fiber. It then reaches the third connector a second time and is reflected once more to the OTDR. The application would therefore detect a reflective event located at twice the distance of the third connector. Since this event is almost null (no loss), and since its distance is a multiple of the third connector distance, The application would interpret it as a possible echo. A reflectance value is specified for reflective events (possible echo).
180
FTB-200
Main Features
The unit features FASTEST, EXFOs one-touch automated measurement. In 10 seconds, you can simultaneously test IL and ORL at up to four wavelengths, in both directions. During the same test, the unit also determines fiber length. The power meter has the following characteristics: Ge, GeX or InGaAs detector with 40 calibrated wavelengths to measure absolute power or link loss Editable list of favorite wavelengths for easy access Modulated signal detection No offset nulling required in normal operation The light source has the following characteristics: Singlemode port (two or three wavelengths), also used for FASTEST and ORL. AND/OR Multimode port (two wavelengths), also used for FASTEST only. Modulated or high-power signal compatible with other EXFO units
181
Other test utilities: Text messaging Full-duplex digital talk set (optional) Visual fault locator to inspect or identify fibers (optional) Result processing and analysis features (also available in the Optical Test Report Viewer application): Customizable test thresholds with visual pass/fail analysis Customize user settings and cable identification parameters FASTEST results displayed according to FTTx usage and terminology
Typical Applications
You can use the MultiTest Module for several applications, such as: Fiber installation and maintenance applications FTTx: testing of passive optical networks (PONs) Absolute power or link loss measurements Bidirectional loss and ORL testing Length measurement All-in-one tool for contractors
182
FTB-200
183
To automate adding and saving results: 1. From the main window, press Setup, then select the Preferences tab. 2. Select one or more of the following options: Save file after adding 10 results to list: if you select this option, you will not need to manually save your file (with Save or Save As) after adding results to the Tested fibers list. Add result to list on this unit after FASTEST: if you select this option, you will not need to press Add to add your result to the Tested fibers list. When your MultiTest Module is the remote unit, it consequently ignores automatic save settings from the master unit. Add result to remote unit after FASTEST: if you select this option and your MultiTest Module is the master unit, the result will automatically be sent and stored on the remote unit. Note: For details about naming settings, see Setting Autonaming Scheme on page 187.
184
FTB-200
To install an EUI connector adapter onto the EUI baseplate: 1. Hold the EUI connector adapter so the dust cap opens downwards.
3 2
3. Insert the connector adapter into the baseplate.
2. Close the dust cap in order to hold the connector adapter more firmly.
4. While pushing firmly, turn the connector adapter clockwise on the baseplate to lock it in place.
185
IMPORTANT
To ensure maximum power and to avoid erroneous readings: Always clean fiber ends as explained below before inserting them into the port. EXFO is not responsible for damage or errors caused by bad fiber cleaning or handling. Ensure that your patchcord has appropriate connectors. Joining mismatched connectors will damage the ferrules. To connect the fiber-optic cable to the port: 1. Clean the fiber ends as follows: 1a. Gently wipe the fiber end with a lint-free swab dipped in isopropyl alcohol. 1b. Use compressed air to dry completely. 1c. Visually inspect the fiber end to ensure its cleanliness. 2. Carefully align the connector and port to prevent the fiber end from touching the outside of the port or rubbing against other surfaces. If your connector features a key, ensure that it is fully fitted into the ports corresponding notch. 3. Push the connector in so that the fiber-optic cable is firmly in place, thus ensuring adequate contact. If your connector features a screwsleeve, tighten the connector enough to firmly maintain the fiber in place. Do not overtighten, as this will damage the fiber and the port. Note: If your fiber-optic cable is not properly aligned and/or connected, you will notice heavy loss and reflection.
186
FTB-200
IMPORTANT
To start using new autonaming settings, you must close the current file. Cable names: maximum 60 characters for prefix, plus 3-digit suffix (or Microsoft Windows limitations when name is manually set) Fiber names: maximum 11 characters for prefix, plus 3-digit suffix (duplicate names allowed when name is manually set) Note: If you manually change a fiber name, then turn the unit off without saving at least one result, this name will be discarded.
187
To set the autonaming scheme: 1. From the main window, press Setup, then select the Results tab. 2. Set the names/values, then press OK.
Note: The cable name you set here will be the suggested file name when saving.
188
FTB-200
IMPORTANT
Thresholds are not saved with measurements. Results are compared to the threshold group currently associated to the file (for FASTEST results, not necessarily the master unit). Note: When transferring results from handheld unit to computer, thresholds are not transferred along with results.
189
To set power, loss or ORL thresholds: 1. From the button bar, press Setup, then select the Thresholds tab.
Add wavelength and its thresholds Edit thresholds for selected wavelentgh
2. In the Threshold groups list, select a group to modify. OR Create a new group by pressing New. Duplicate names are allowed, but you should always use distinct names to avoid confusion. 3. Select loss units (dB or dB/distance; distance units are selected in the Preferences tab) or power units.
190
FTB-200
4. In the Thresholds list, select a wavelength for which you want to set thresholds, then press Edit. OR Add a new wavelength to the list by pressing New. Wavelengths that are not supported by FASTEST are simply ignored in FASTEST result tables.
5. In the text boxes, modify threshold values for the selected wavelength, then press OK to confirm the new thresholds (or Cancel to return to previous values). You select power units and FASTEST loss units (dB or dB/distance) on the Thresholds tab (and distance units on the Preferences tab). 6. Press OK to return to the main window. To rename a threshold group: 1. From the Thresholds tab, select a group in the Threshold groups list. 2. Press Rename, then set the new name (maximum 64 characters) and press OK.
191
Measured power/loss Value under threshold Switch between favorite wavelengths Display power (W or dBm) or loss (dB)
Change name of next saved fiber Add current value to Tested Fibers (to actually save data, press Save on function bar) Perform offset nulling
193
InGaAs Ge
800, 820, 830, 840, 850, 860, 870, 880, 910, 980, 1270, 1280, 1290, 1300, 1310, 1320, 1330, 1340, 1390, 1450, 1460, 1470, 1480, 1490, 1500, 1510, 1520, 1530, 1540, 1550, 1560, 1570, 1580, 1590, 1600, 1610, 1620, 1630, 1640, 1650. All the above, plus 1370 and 1060.
800, 840, 850, 860, 910, 980, 1280, 1300, 1310, 1320, 1450, 1470, 1480, 1490, 1510, 1520, 1530, 1540, 1550, 1560,1570, 1625. Same as above.
GeX
Note: The list must always contain at least one selected wavelength.
194
FTB-200
To customize the list of favorite and selected wavelengths: 1. From the button bar, press Setup, then select the Power Meter tab. 2. Scroll through the list. 3. Press on the highlighted wavelength to select/deselect it. An X appears beside selected wavelengths.
4. If a wavelength does not appear on the list, enter its value in the New wavelength box and press Add. You can also remove a wavelength from the list by pressing Delete. 5. Repeat these steps for other wavelengths as necessary. 6. Press OK to return to the main window. To revert to the factory-default list: 1. From the button bar, press Setup, then select the Power Meter tab. 2. Press Revert to factory settings.
195
IMPORTANT
Light must not reach detectors when nulling offsets. Always use an EUI or protective screw cap. Do not use a soft rubber cover. Note: Starting a nulling automatically deactivates all light sources on the unit. To perform an offset nulling: 1. From the main window, select the Power Meter tab. 2. Press Nulling.
3. Tighten the protective caps on the power meter and FASTEST ports, then press OK. The nulling process takes approximately 10 seconds. Nulling status is indicated in the data display. If light is still detected, you will need to place the caps properly and restart.
196
FTB-200
Light source
Power meter
FTB-3930
197
MULTITEST
Light source
Power meter
FTB-3930
4. Activate the source at the desired wavelength. 5. Match the power meter wavelength with the source wavelength as follows:
Measured loss
Scroll through the Wavelength list to switch between favorite wavelengths of your power meter (see Defining the List of Favorite Wavelengths on page 194).
198
FTB-200
6. Scroll through the Unit list until you get dB units to retrieve the last saved reference. OR Press Reference to save the current power as the new reference. Reference power appears (in dBm) and current loss is automatically switched to dB. 7. Repeat the procedure for each wavelength you want to reference.
199
CAUTION
Connect high-power live fiber to the power meter port only. To perform power or loss measurements: 1. If necessary, perform an offset nulling (see Nulling Electrical Offsets on page 196). 2. From the main window, select the Power Meter tab.
3. Check your fibers and clean them properly (see Cleaning and Connecting Optical Fibers on page 186). 4. For loss measurements, reference your power meter to a light source (see Referencing Your Power Meter to a Source on page 197), then deactivate the light source. 5. If you have used a single reference patchcord, disconnect it from the power meter port only, then attach a second reference patchcord to the power meter. OR If you have used two reference patchcords, disconnect both of them at the bulkhead.
200
FTB-200
6. Using bulkhead adapters or the system patch panels, connect a fiber under test to reference patchcords attached to the light source and power meter.
Adapter Reference patchcord Bulkhead adapter Light source Fiber under test Reference patchcord Bulkhead adapter Power meter
MULTITEST
FTB-3930
7. Activate the source at the desired wavelength. 8. Match the power meter wavelength with the source wavelength as follows: Scroll through the Wavelength list to switch between favorite wavelengths of your power meter (see Defining the List of Favorite Wavelengths on page 194). If the unit detects a modulated signal, it beeps and the signal frequency is indicated in the status bar. 9. Scroll through the Unit list to select the desired power (W or dBm) or loss (dB) unit.
201
10. Add the displayed values to the Tested fibers list if you want. If auto-save is activated (see Customizing Your MultiTest Module on page 183), results are automatically saved after adding them to the list. 10a.Change the displayed cable and fiber names as needed. 10b.Press Add to save the value along with wavelength, reference power, date and time. The fiber name will increment automatically, ready to save the next value. For details about viewing results, see Managing Test Results on page 223. 11. Repeat the procedure for other wavelengths.
202
FTB-200
ORL meter sensitivity Measured ORL (positive value) Switch between singlemode wavelengths Value under threshold
Calibrate ORL meter sensitivity Set reference using any patchcord Set reference using ORL calibrated patchcord (best) Current wavelength
Change name of next saved fiber Add current value to Tested fibers (to actually save data, press Save on function bar)
203
Select wavelength
Measure ORL
Save results
204
FTB-200
FTB-3930
Termination
205
4. Terminate the fiber as close as possible before the component under test. Wrap it at least 10 turns around a mandrel or small diameter tool, adding turns until the reading stabilizes. 5. Press OK to save the ORL zero value, then remove the termination. To revert to the factory-default ORL zero value: 1. From the main window, select the ORL Meter tab. 2. Press Default ORL Zero.
206
FTB-200
3. Scroll through the Wavelength list to select a singlemode wavelength. 4. Check your fibers and clean them properly (see Cleaning and Connecting Optical Fibers on page 186). 5. Connect a fiber to the FASTEST SM port of your unit.
207
6. Perform an ORL reference with one of the following: Using an ORL calibrated patchcord (14.7 dB), press ORL Reference. If no such patchcord is available, press Loopback Ref and use another patchcord connected to the power meter port.
7. Perform an ORL zero measurement (see Performing ORL Reference and Setting ORL Zero Value on page 205).
208
FTB-200
8. Terminate the fiber as close as possible after the component under test. Wrap it at least 10 turns around a mandrel or small diameter tool, adding turns until the reading stabilizes.
MULTITEST
FTB-3930
Termination
Note: Avoid bending the fiber between the unit and the termination point. The displayed value represents the ORL of the component under test. 9. Add the displayed values to the Tested fibers list if you want. If auto-save is activated (see Customizing Your MultiTest Module on page 183), results are automatically saved (along with wavelength, date and time) after adding them to the list. 9a. Change the displayed cable and fiber names as needed. 9b. Press Add. The fiber name will increment automatically, ready to save the next value. For details about viewing results, see Managing Test Results on page 223. 10. Repeat procedure for other wavelengths if necessary.
209
Perform reference
Perform FASTEST
Save results
211
212
FTB-200
To set up the FASTEST: 1. From the button bar, press Setup, then select the FASTEST tab.
2. Select the FASTEST parameters. To revert to factory-default FASTEST settings: 1. From the button bar, press Setup, then select the FASTEST tab. 2. Press Revert to factory settings.
213
Description
Reference taken with both units Reference taken separately on together using their FASTEST ports. each unit (FASTEST port connected Slightly more accurate value than to power meter port). loopback method. Can be at different locations.
Loss included in Loss due to system under test and Loss due to system under test and FASTEST result one connector mating. the two connector matings.
Connector mating System under test Connector mating System under test Connector mating
Elements to consider
Includes neither an ORL reference nor an ORL zero measurement. To obtain them, use the ORL Meter pane (see Performing ORL Reference and Setting ORL Zero Value on page 205). With multiple referencing, you may coordinate an FTB-3930 with up to 10 FOT-930 units.
When measuring ORL (FASTEST or ORL meter), accounts for connector loss and adjusts ORL calibration accordingly. Not recommended for short links.
214
FTB-200
To perform a side-by-side reference: 1. On the master unit (the one initiating the test), select the FASTEST tab. 2. In the Reference pane, select the Side-by-side reference type. The data display shows previous reference values (if any) for the currently connected remote unit.
IMPORTANT
With its multiple referencing feature, your unit saves the last 10 side-by-side references for each DUT type and compatibility mode. 3. Connect both units through their FASTEST ports, using two reference patchcords and a bulkhead adapter.
MULTITEST MULTITEST
Reference patchcord
FTB-3930
215
4. Press Take Reference. After a few seconds, the unit displays new reference values for each wavelength on both units. If values are not acceptable, try to clean connectors and repeat this step.
5. Disconnect the two patchcords from the bulkhead only and connect them to the fiber under test (using bulkhead adapters or the system patch panels).
IMPORTANT
You can turn off the unit without losing the reference. If you disconnect the patchcords from the FASTEST ports, you must take a new reference.
216
FTB-200
To perform a loopback reference: 1. On the master unit (the one initiating the test), select the FASTEST tab. 2. In the Reference pane, select the Loopback reference type. The data display shows previous reference values (if any).
3. Connect a reference patchcord from the FASTEST port to the power meter adapter.
MULTITEST
FTB-3930
217
4. Press Take Reference. After a few seconds, the unit displays new reference values for each wavelength. If values are not acceptable, try to clean connectors and repeat this step.
5. Disconnect the reference patchcord from the power meter adapter only and connect it to the fiber under test.
IMPORTANT
You can turn off the unit without losing the reference. If you disconnect the patchcord from the FASTEST port, you must take a new reference. 6. Repeat the procedure with the second unit.
218
FTB-200
1. If necessary, null the offsets (see Nulling Electrical Offsets on page 196). 2. Clean your fibers properly (see Cleaning and Connecting Optical Fibers on page 186). 3. Set up the FASTEST (see Setting Up the FASTEST on page 212). 4. If you are testing ORL, perform an ORL zero measurement from the ORL Meter pane (see Performing ORL Reference and Setting ORL Zero Value on page 205). 5. Reference your unit (see Referencing Units for FASTEST on page 214).
3. If you are testing ORL, perform an ORL zero measurement from the ORL Meter pane.
219
Unit A (Master)
Unit B
7. From the button bar, press FASTEST (large green button). The units establish communication and automated tests begin. Measurements appear on both units as they are taken. 8. Add the displayed values to the Tested fibers list if you want. If automatic save was activated for one or both units (see Customizing Your MultiTest Module on page 183), results are already added to the list. 8a. Change the displayed cable and fiber names as needed. 8b. Press Add. The fiber name increments automatically, ready to save the next value.
220
FTB-200
Unit A (Master)
Unit B
If you are not satisfied with the results, press FASTEST and redo the test. For details about viewing FASTEST results, see Managing Test Results on page 223.
Measured values
Add current value to Tested fibers (to actually save data, press Save on function bar)
221
IMPORTANT
The date and time of FASTEST references are not saved. They are displayed with the results immediately after the test only. Before or after saving the current file, you can view and edit results at any time (as long as a result was added to a Tested fibers list).
223
To view and process test results: From the MultiTest Module applications main window, select the Results tab. The following functions are available when viewing results:
IMPORTANT
The threshold group you select will remain associated with the file, even if you change the default group. However, if you change values in the selected group, they will apply to your results. Note: For more accuracy, the loss average is always calculated from loss values in W and then converted to dB.
224
FTB-200
225
CW signal (the default): constant power over the temperature range, but about 3 dB lower than maximum. High-power signal: reaches maximum power, but its power slightly varies over the temperature range.
MULTITEST
WARNING
When a source is active, its port emits invisible laser radiation. Avoid exposure and do not stare directly into the beam. Ensure that any unused port is properly protected with a cap. If you switch to power meter or ORL meter, a Source status pane is always displayed. When you switch sources, the modulation remains the same. It is indicated in the data display. Only one source/wavelength may be active at a time. The active port (SM or MM) is indicated in the data display. The source status is indicated with a LED in the status bar and on the Compact Modular Platform front panel. Note: The Compact Modular Platform front panel always shows the source, VFL, ORL meter or talk set port status (even when you use other applications).
227
To activate a light source: 1. Connect the fiber under test to the source port (see Cleaning and Connecting Optical Fibers on page 186). 2. From the main window, select the Source/VFL tab (units with a VFL) or the Source tab (units with no VFL).
Data display
Power button
Status LED
3. In the Source pane, select a wavelength using the Wavelength dial. 4. Slide the Power switch to On. To deactivate a light source: Slide the Power switch to Off. To change the signal modulation: 1. Activate the source if you want. 2. Select a modulation using the Modulation dial.
228
FTB-200
WARNING
When the VFL is active, the VFL port emits visible laser radiation. Avoid exposure and do not stare directly into the beam. Ensure that any unused port is properly protected with a cap. If you switch to power meter or ORL meter, a VFL status pane is always displayed. The VFL status is indicated with a LED in the status bar and on the Compact Modular Platform front panel.
229
To activate the VFL and inspect a fiber: 1. Connect the fiber under test to the VFL port (see Cleaning and Connecting Optical Fibers on page 186). 2. From the main window, select the Source/VFL tab.
Data display
Power switch
Status LED
3. In the VFL pane, slide the Power switch to On. 4. To switch between blinking (1 Hz) and continuous (CW) signals, use the Modulation dial. 5. Without looking directly into the beam, examine the fiber. If light is coming out of the rubber jacket or on the side of the ferrule, the fiber is defective. 6. Deactivate the VFL by sliding the Power switch to Off.
230
FTB-200
IMPORTANT
The messaging feature does not work with the talk set port. The messaging feature will not work if both units try to send a message at the same time. You cannot use other features while sending or receiving a message. You cannot cancel the operation.
231
To send a text message: 1. Connect the units at each end of the same fiber via their FASTEST ports.
MULTITEST
FTB-3930
232
FTB-200
3. Ensure that the port indicated (SM or MM) is the one you use. Otherwise, do as follows: 3a. In the function bar, press Setup, then select the FASTEST tab. 3b. Change the FASTEST port, then return to the Messages pane. 4. Scroll through the Predefined messages list and select a message. OR Enter a custom message in the New message text box. 5. Press the Send button next to your type of message (predefined or new). After a few seconds, your message will automatically appear on the receiving unit (if its MultiTest Module application runs) and on the Message log pane. If an incompatible unit (or no unit) is detected at the other end, or if the FASTEST port of the receiving unit is in use, an error message will appear. When you receive a message: Your unit emits a short beep and displays the received message. Press Close to clear the display and return to your previous function. Press Reply to access the Messages tab and reply to the message. You will then need to return to your previous function manually. However, your last readings will be lost. Note: If the message was written with a language not supported by your unit, you will see unreadable characters only.
233
Communicating by Voice
With the optional talk set, you can establish full-duplex digital voice communication over a dedicated fiber, even while other functions are in use. The talk set provides adjustable headset volume and uses a dedicated port. It is not compatible with the FOT-920 or FTB-3920 talk sets.
Talk set port
MULTITEST FTB-3930
Note: You may use any commercially available headset equipped with a microphone. It is also compatible with the GP-92B speakerphone. While communication is established, the actions and displays of each unit may differ as follows: You can send or receive a call at any time, except during a FASTEST. To receive a call, you must be running the MultiTest Module application. Once communication is established, it will be maintained even if you use the units other test tools (including FASTEST). If communication is lost, calling unit will automatically try to reestablish communication.
234
FTB-200
1. Connect the calling unit to one end of the fiber via its talk set port, and plug in your headset.
1. Connect the receiving unit to the other end of the fiber via its talk set port, and plug in your headset.
MULTITEST
FTB-3930
235
Calling Unit
Receiving Unit
3. Press Talk. Your unit establishes communication with receiving unit. If no compatible unit is detected at the other end, a message appears. 4. Talk to the receiving unit. 5. To end the communication, press End from the Talk set pane.
When receiving the call, the unit beeps. A phone icon appears to indicate that communication is established. 2. Simply answer (no need to press a key). 3. To end the communication, press End from the Talk set pane.
To adjust the headset volume (calling or receiving unit): From the Talk set pane, move the Headset volume slider to the top (volume increase) or to the bottom (volume decrease). You cannot adjust or mute the ring sound.
236
FTB-200
29 Managing Data
You can copy, move, rename, delete files and folders directly on your unit. You can transfer files from your unit to a USB memory drive, a CompactFlash card or a computer. You can also transfer data from a storage device or a computer to your unit. Your unit is equipped with 2 types of USB ports: USB host port (type A connector) drives to connect USB memory
USB secondary port (type B connector) to transfer data directly between your unit and a computer using a USB cable.
IMPORTANT
To avoid any problems and prevent malfunctioning, use only the USB drives approved by EXFO Electro-Optical Engineering Inc..
237
Managing Data
To view the free disk space on your unit: 1. From Main Menu, press System Info. 2. Select Platform. The free disk space is displayed next to Available Flash items.
3. When you have finished, close System Information. To manage files or folders on your unit only: From Main Menu, select File Manager.
238
FTB-200
Managing Data
To transfer files or folders between your unit and a CompactFlash card or a USB memory drive: 1. Insert the CompactFlash card into the card reader until it stops. Ensure that the holes for the connector pins are towards the back of the card reader and that you see the label with a small arrow on top.
CAUTION
Applying too much pressure on the card will cause irreparable damage to the card. OR Connect the USB memory drive to the USB host port. 2. From Main Menu, select File Manager. The list of available drives and folders should include the card (Storage Card) or the memory drive (Removable Disk). You can now manage your files and folders as you wish. Note: If you do not see the card or the memory drive, simply close File Manager and reopen it. 3. When you have finished, simply remove the card or the memory drive.
CAUTION
Always use the card readers eject button to remove the card from your unit.
239
Managing Data
IMPORTANT
You must install Microsoft ActiveSync on the computer you want to use with your unit. Otherwise, you will not be able to transfer data. Before connecting your unit to a computer, you have to install the required software on the computer. For more information on the installation, refer to the Release Notes on the installation CD. 1. If it is not already done, install Microsoft ActiveSync. Follow the instructions given on the screen. 2. Connect the provided USB cable to the computer (type A end) and your unit (type B end). Note: The computer and your unit do not need to be off when you connect the cable.
240
FTB-200
Managing Data
3. Once ActiveSync indicates that the computer and your unit are connected, right-click the ActiveSync icon then select Explore to access the files and folders stored on your unit.
OR On the computer desktop, double-click My Computer. Double-click Mobile Device to access the files and folders stored on your unit. You can now manage your files and folders as you wish. 4. When you have finished, simply disconnect the USB cable.
241
243
To perform a ping test: 1. From ToolBox CE, select the Programs tab, then select IP Testing Tools.
244
FTB-200
3. Enter an URL or an IP address to reach. You can press the Default button to use the unit's default ping address. The default value cannot be configured.
4. Set the parameters: Packet size Number of packets to send Timeout limit TTL limit Clear the Allow fragmentation check box if you prefer sending complete packets to the host. 5. Press the Start button. You can stop a ping test at any time by pressing the Stop button.
245
246
FTB-200
To perform a Trace Route test: 1. From IP Testing Tools, select the Trace Route tab. 2. Enter an URL or an IP address to reach. You can press the Default button to use the unit's default trace route address. The default value cannot be configured.
3. Set the other parameters: Timeout limit TTL limit Select or clear the Resolve IP addresses check box if you want to get the host name for the corresponding IP address of nodes. 4. Press the Start button. You can stop a trace route test at any time by pressing the Stop button.
247
248
FTB-200
31 Maintenance
To help ensure long, trouble-free operation: Always clean fiber-optic connectors before using them. Keep the unit free of dust. Clean the unit casing and front panel with a cloth slightly dampened with water. Store unit at room temperature in a clean and dry area. Keep the unit out of direct sunlight. Avoid high humidity or significant temperature fluctuations. Avoid unnecessary shocks and vibrations. If any liquids are spilled on or into the unit, turn off the power immediately and let the unit dry completely.
WARNING
Use of controls, adjustments and procedures for operation and maintenance other than those specified herein may result in hazardous radiation exposure.
249
Maintenance
Cleaning EUI Connectors
IMPORTANT
If any damage occurs to internal connectors, the module casing will have to be opened and a new calibration will be required. To clean EUI connectors: 1. Remove the EUI from the instrument to expose the connector baseplate and ferrule.
Turn
Push
Pull
2. Moisten a 2.5 mm cleaning tip provided by EXFO with one drop of isopropyl alcohol (alcohol may leave traces if used abundantly). 3. Slowly insert the cleaning tip into the EUI adapter until it comes out on the other side (a slow clockwise rotating movement may help).
3 5
250
FTB-200
Maintenance
Cleaning EUI Connectors
4. Gently turn the cleaning tip one full turn, then continue to turn as you withdraw it. 5. Repeat steps 3 to 4 with a dry cleaning tip. Note: Make sure you dont touch the soft end of the cleaning tip. 6. Clean the ferrule in the connector port as follows: 6a. Deposit one drop of isopropyl alcohol on a lint-free wiping cloth.
IMPORTANT
Isopropyl alcohol may leave residues if used abundantly or left to evaporate (about 10 seconds). Avoid contact between the tip of the bottle and the wiping cloth, and dry the surface quickly. 6b. Gently wipe the connector and ferrule. 6c. With a dry lint-free wiping cloth, gently wipe the same surfaces to ensure that the connector and ferrule are perfectly dry. 6d. Verify connector surface with a portable fiber-optic microscope (e.g., EXFOs FOMS) or fiber inspection probe (e.g., EXFOs FIP).
WARNING
Verifying the surface of the connector WHILE THE UNIT IS ACTIVE WILL result in permanent eye damage. 7. Put the EUI back onto the instrument (push and turn clockwise). 8. Throw out cleaning tips and wiping cloths after one use.
251
Maintenance
Cleaning Detector Ports
IMPORTANT
Always cover detectors with protective caps when unit is not in use. To clean detector ports: 1. Remove the protective cap and adapter (FOA) from the detector. 2. If the detector is dusty, blow dry with compressed air. 3. Being careful not to touch the soft end of the swab, moisten a supplied cleaning tip with only one drop of isopropyl alcohol.
IMPORTANT
Alcohol may leave traces if used abundantly. Do not use bottles that distribute too much alcohol at a time. 4. While applying light pressure (to avoid breaking the detector window), gently rotate the cleaning tip on the detector window. 5. Repeat step 4 with a dry cleaning tip or blow dry with compressed air. 6. Discard the cleaning tips after one use.
252
FTB-200
Maintenance
Recharging the Main Battery
253
Maintenance
Recharging the Main Battery
IMPORTANT
Batteries are not charged at the factory. Fully charge them (about 3 hours) before using the unit for the first time. The time required to charge batteries depends on various factors such as the type of modules currently in use and the ambient temperature. Never store at temperatures above 60 C (140 F). Charge only with specified charger. Depending on the way the unit is used, after a while, the charge status icon may no longer correspond to the actual power level of the battery (e.g., icon indicates that power level is sufficient, but unit turns off because battery is too weak). A complete calibration cycle will be necessary (see Recalibrating the Battery on page 255). To recharge the main battery: Connect the unit to a power outlet using the AC adapter/charger. The charge cycle will start and end automatically.
254
FTB-200
Maintenance
Recalibrating the Battery
255
Maintenance
Recalibrating the Battery
To recalibrate the batteries: 1. From ToolBox CE, select File Manager, then select Program Files>Metrino>MiniShell>BatteryCalibration. Select Metrino.BatteryCalibration.Application to start the utility.
256
FTB-200
Maintenance
Recalibrating the Battery
2. Connect the AC adapter/charger to your unit. 3. Press the Start Calibration button (the Stop Calibration button will become available). Once calibration is complete, the Start Calibration button will become available again.
257
Maintenance
Replacing Battery
Replacing Battery
WARNING
Do not throw battery into fire or water and do not short-circuit the batterys electrical contacts. Do not disassemble. To replace the main battery: 1. Turn off the unit. If you let the unit in suspend mode (see Turning On or Off the Unit on page 25), you will have to change the main battery within 15 minutes. Otherwise, the unit will not be able to revert to your exact work environment (equivalent of a shutdown). 2. Open the battery compartment door located on the top of the unit (simply turn the cap counterclockwise and pull it away). 3. Replace battery. 4. Close the battery compartment door. Note: You cannot replace the clock battery yourself.
258
FTB-200
Maintenance
Verifying Your OTDR
30 ns
10 ns
The deviation () should be between 2.0 dB and 3.0 dB. The deviation must be measured in the linear backscatter region. Do not measure the deviation near distinct reflections. Performance will be affected if the observed deviation is beyond these limits. The OTDR will eventually require a factory calibration. Note: This does not affect the precision of distance or loss measurements.
259
Maintenance
Verifying Your OTDR
To evaluate the launch level: 1. Connect at least 2 km of fiber to the OTDR port. Ensure that the OTDR port and connectors are properly cleaned and that the fiber settings are accurate (IOR, Helix factor and RBS). Do not use a test jumper between the OTDR and the fiber under test to limit the number of connectors. 2. Set the distance range to the fiber length used for the evaluation, the pulse width to the shortest value available, and the acquisition time to 15 seconds. 3. Evaluate the launch level at 0 km by extrapolating the linear region of the curve.
The launch level should be located within the launch window (light green rectangle) appearing on the left side of the Y axis on the graph. If the launch level is below this window, clean the output connector again, retest the fiber and change the output connector if necessary. If the situation persists, you will observe a degradation in dynamic range. Return the OTDR to EXFO. Note: This does not affect the precision of distance or loss measurements.
260
FTB-200
Maintenance
Verifying Your OTDR
To verify the OTDRs zero: 1. Connect a patchcord, approximately 10 m long, to the OTDR port. The exact length of the jumper must have been measured mechanically. Ideally, you should use an unjacketed patchcord. Ensure that the OTDR port and connectors are correctly cleaned. Ensure that the fiber settings are accurate (IOR, Helix factor and RBS). 2. Set the distance range to less than 2 km, the pulse width to 10 ns and the acquisition time to 30 s. 3. Take a distance measurement, positioning marker A as shown below.
Note: You can also press the Analyze button from the Event pane. The analysis should return the right position directly. The position of the marker should be equal to the length of the jumper ( 2 m). For example, 8 to 12 m if the jumper is 10 m long. If the distance error is beyond this limit, return the OTDR to EXFO.
261
Maintenance
Verifying Your OTDR
To measure the event and attenuation dead zones: 1. Connect 2 km of fiber directly to the OTDR port. Use the shortest pulse width and distance range possible. Ensure that the OTDR port and connectors are correctly cleaned. Ensure that the fiber settings are accurate (IOR, Helix factor and RBS). 2. Measure the length (E) of the first reflection at 1.5 dB from the maximum, as shown below. This is the event dead zone. 3. Measure the distance (A) between the beginning of the reflection and the point where the trace returns to the backscattering level with a 0.5 dB uncertainty, as shown below. Use A and B markers in the Measure pane. This is the attenuation dead zone.
1.5 dB 0.5 dB
E A
If the results exceed the maximum permitted specification (refer to the calibration certificate that came with your product), performance will be affected. A damaged output connector may be the cause. The reflectance of the output connector should be below 35 dB to attain an adequate dead zone. If reflectance is greater than 35 dB (e.g., 20), the incorrect dead zone will be the result of a bad connection. If this is the case, carefully clean the connector. If the problem persists, change the output connector. If the problem remains even after changing the output connector, return the OTDR to EXFO. Note: This does not affect the precision of the distance or loss measurements.
262
FTB-200
Maintenance
Verifying Your OTDR
To measure the dynamic range: 1. Connect the OTDR as indicated below. Other configurations are possible, such as the one explained in the section on how to determine measurement range, if you use the shortest fiber length from that setup. In all cases, the fiber should have several sections longer than 2 km, with no loss greater than 8 dB and with an average attenuation not exceeding 1 dB/km. Ensure the OTDR port and connectors are correctly cleaned, and that the fiber settings are accurate (IOR, Helix factor and RBS).
OTDR
Fiber End
263
Maintenance
Verifying Your OTDR
2. Set the distance range to 160 km (singlemode fiber), the pulse width to the longest value available and the acquisition time to 180 seconds.
1 dB Dynamic range
Dynamic range is the difference between the launch level and the position on the curve where the peak-to-peak noise level is 1 dB, plus a correction factor relative to the noise amplitude (which is 5.2 dB). If the result falls below the minimum permitted specification (refer to the calibration certificate that came with your product), you will observe a degradation of performance. It could be caused by a damaged output connector. If this is the case, clean the connector. If the problem persists, change the output connector. If the problem remains even after changing the output connector, return the OTDR to EXFO. Note: This does not affect the precision of the distance or loss measurements.
264
FTB-200
Maintenance
Verifying Your OTDR
To determine the measurement range (singlemode models only): 1. Connect the OTDR as indicated below. Other configurations are possible, but the fiber should have several sections longer than 2 km, with no loss greater than 8 dB and with the average attenuation not exceeding 1 dB/km. A variable attenuator will be used to adjust the loss in the span. One or several non-reflective events with a nominal loss of 0.5 dB should be present. Join a series of fiber reels between the OTDR and the variable attenuator for a length of approximately 20 km. Join another series of reels to complete the fiber length needed for the test. Ensure that the OTDR port and connectors are correctly cleaned. Make sure the fiber settings are accurate (IOR, Helix factor and RBS).
Measured Fiber Event
20 km
OTDR 2 km or more 2 km or more 1 to M reels of fiber 4 km min Fiber End
Variable attenuator
( Add as needed )
265
Maintenance
Verifying Your OTDR
2. Set the distance range to 80 km (singlemode fiber), the pulse width to the longest value available and the acquisition time to 180 seconds.
The measurement range using the non-reflective event method represents the amount of attenuation (in dB) between the launch level and a 0.5 dB splice (which can be detected and measured to an accuracy of 0.1 dB). You can measure it by simply making an acquisition on a fiber with a known attenuation and a known 0.5 dB splice. Attenuation between the splice and the launch level is added until the analysis can no longer measure the splice to within 0.1 dB.
266
FTB-200
Maintenance
Recalibrating the Unit
For FTB-200 Compact Modular Platform: under normal use, EXFO Electro-Optical Engineering Inc. recommends calibrating your Compact Modular Platform every year OTDR module every year MultiTest module every three years.
267
Maintenance
Recycling and Disposal (Applies to European Union Only)
268
FTB-200
32 Troubleshooting
Solving Common Problems
Problem Cause Solution
Charge the battery. Replace the battery with a fully charged one. Connect the unit to an external power supply using the AC adapter/charger.
External power supply Make sure the external power supply is unplugged. is plugged in at both ends. Battery door is not in place or is defective. Unit screen is dark. Units backlight is off. Battery is discharged and unit has shut down. Replace the battery door properly. Press the backlight button. Charge the battery. Replace the battery with a fully charged one. Connect the unit to an external power supply using the AC adapter/charger. External keyboard is not External keyboard has working. not been detected. Unplug the keyboard and then plug it again. Turn off the unit, plug in the keyboard, and turn on the unit. Screen characters are dim. Brightness is not set properly. Adjust brightness.
269
Troubleshooting
Solving Common Problems
Problem
Cause
Solution
Press
unit beeps twice or the corresponding LED turns to red to shutdown the unit, then turn it on again to reset it. Press and hold it down until the unit beeps twice or the corresponding LED turns to red to shutdown the unit. Press simultaneously and to display the calibration window.
Impossible to calibrate Screen calibration is the touchscreen via the very poor. Stylus control panel.
Replace the battery. Charge the battery. Perform a complete battery calibration cyclea. Perform a complete battery calibration cyclea.
A complete battery calibration cycle consists of a full charge, immediately followed by a full discharge, then followed by a full charge.
270
FTB-200
Troubleshooting
OTDR
OTDR
Problem Cause Solution
The application displays The fiber under test is Ensure that the fiber under test is too long. shorter than the maximum length the a message indicating OTDR can measure. that a Non-resolved fiber end event has been found. In multimode fiber testing, launch level remains out of the launch window (light green rectangle) even after cleaning and verifying connection. Wrong fiber type selected. If you are testing C fiber, from the Auto or Advanced main window, select MM 50 m. If you are testing D fiber, from the Auto or Advanced main window, select MM 62.5 m.
271
Troubleshooting
MultiTest
MultiTest
Problem Possible Cause Solution
Light reaches at least one During offset nulling, you get the following message: detector (power meter or FASTEST). Light detected during nulling.
Ensure protective caps are tightly screwed on FASTEST and power meter ports and perform the nulling again. Do not use rubber cover. Check the connections. Ensure you use the proper fiber and connector type and that you use your power meter within specifications. Always perform ORL reference before each ORL measurement. Perform an ORL zero measurement to increase the sensitivity of the detector. Ensure mandrel is correct and that patchcord and connectors are in good condition.
When using the power meter, you get Power Too Low or Power Too High.
Power of the signal received at the power meter port is outside its measurement range.
When measuring ORL, you Measured reflected power get Too Much Power. is higher than emitted power. The ORL reference is incorrect. When measuring ORL, you Reflection is below get ORL exceeds. sensitivity of ORL meter.
272
FTB-200
Troubleshooting
MultiTest
Problem
Possible Cause
Solution
Wait until FASTEST completes, turn source and ORL meter off or exit Probe mode (FOT-930). Make sure remote unit is an FOT-930, FTB-3930, FOT-920 or FTB-3920. Set the port (SM or MM) correctly in Setup (FASTEST tab) on master unit. Set the compatibility to FOT-920 / FTB-3920 in Setup (FasTesT tab) on master unit.
Remote unit is not compatible. Selected port on master unit differs from actual port to which fiber is connected. Compatibility set to FOT-930 / FTB-3930 but remote unit is not an FOT-930 or FTB-3930. During FASTEST, you get a message saying that loopback reference was not performed. ORL values are inaccurate for short fibers at 1310 nm during a FASTEST. Unable to communicate with an FOT-920 using the talk set. Unable to establish connection with compatible talk set.
Loopback reference was Perform a loopback reference selected, but not performed before FASTEST measurement. (or reference is outdated). Measure ORL manually.
Probe mode is activated on Deactivate Probe mode. remote unit (FOT-930 only).
273
Troubleshooting
MultiTest
Problem
Possible Cause
Solution
Selected port differs from actual port to which fiber is connected. Receiving units port is in use.
On the sending unit, set the correct port (SM or MM) in Setup (FASTEST tab). Wait until FASTEST completes, turn source and ORL meter off or exit Probe mode (FOT-930). Make sure remote unit is an FOT-930, FTB-3930, FOT-920 or FTB-3920.
On Results tab, a box The application is unable to Perform the measurements indicates Invld instead of calculate the FASTEST ORL again. a numerical value. value (e.g., at 1310 nm for short fibers). On Results tab, a box The calculated value makes Perform the measurements indicates - - - - instead of no sense (e.g., negative again. Note that the a numerical value. ORL value). calculated value is usually shown on the printed report. When printing a report, The Fiber ID column is too Rename fiber IDs that have a long name. rightmost columns are not wide. The width of this printed. column is determined with the widest name. When saving data in text formats, some ORL values are higher than the indicated sensitivity. Saved text files containing symbols such as > may not open properly in some applications. The actual measured value is used instead, even if it is not accurate.
274
FTB-200
Troubleshooting
Finding Information on the EXFO Web Site
275
Troubleshooting
Contacting the Technical Support Group
To accelerate the process, please have information such as the name and the serial number (see the product identification label), as well as a description of your problem, close at hand.
Transportation
Maintain a temperature range within specifications when transporting the unit. Transportation damage can occur from improper handling. The following steps are recommended to minimize the possibility of damage: Pack the unit in its original packing material when shipping. Avoid high humidity or large temperature fluctuations. Keep the unit out of direct sunlight. Avoid unnecessary shock and vibration.
276
FTB-200
33 Warranty
General Information
EXFO Electro-Optical Engineering Inc. (EXFO) warrants this equipment against defects in material and workmanship for a period of one year (FTB-200 Compact Modular Platform and OTDR module) and of three years (MultiTest module) from the date of original shipment. EXFO also warrants that this equipment will meet applicable specifications under normal use. During the warranty period, EXFO will, at its discretion, repair, replace, or issue credit for any defective product, as well as verify and adjust the product free of charge should the equipment need to be repaired or if the original calibration is erroneous. If the equipment is sent back for verification of calibration during the warranty period and found to meet all published specifications, EXFO will charge standard calibration fees.
IMPORTANT
The warranty can become null and void if: unit has been tampered with, repaired, or worked upon by unauthorized individuals or non-EXFO personnel. warranty sticker has been removed. case screws, other than those specified in this guide, have been removed. case has been opened, other than as explained in this guide. unit serial number has been altered, erased, or removed. unit has been misused, neglected, or damaged by accident. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL EXFO BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
277
Warranty
Liability
Liability
EXFO shall not be liable for damages resulting from the use of the product, nor shall be responsible for any failure in the performance of other items to which the product is connected or the operation of any system of which the product may be a part. EXFO shall not be liable for damages resulting from improper usage or unauthorized modification of the product, its accompanying accessories and software.
Exclusions
EXFO reserves the right to make changes in the design or construction of any of its products at any time without incurring obligation to make any changes whatsoever on units purchased. Accessories, including but not limited to fuses, pilot lamps, batteries and universal interfaces (EUI) used with EXFO products are not covered by this warranty. This warranty excludes failure resulting from: improper use or installation, normal wear and tear, accident, abuse, neglect, fire, water, lightning or other acts of nature, causes external to the product or other factors beyond EXFOs control.
IMPORTANT
EXFO will charge a fee for replacing optical connectors that were damaged due to misuse or bad cleaning.
Certification
EXFO certifies that this equipment met its published specifications at the time of shipment from the factory.
278
FTB-200
Warranty
Service and Repairs
279
Warranty
EXFO Service Centers Worldwide
EXFO Europe Service Center Le Dynasteur 10/12, rue Andras Beck 92366 Meudon la Fort Cedex FRANCE EXFO China Service Center/ Beijing OSIC Beijing New Century Hotel Office Tower, Room 1754-1755 No. 6 Southern Capital Gym Road Beijing 100044 P R. CHINA .
Tel.: +86 (10) 6849 2738 Fax: +86 (10) 6849 2662 beijing.service@exfo.com
280
FTB-200
Technical Specifications
IMPORTANT
The following technical specifications can change without notice. The information presented in this section is provided as a reference only. To obtain this products most recent technical specifications, visit the EXFO Web site at www.exfo.com.
Storage
GENERAL SPECIFICATIONS Temperature Operating Storage 3 Relative humidity Size (H x W x D) Weight Vibration Mechanical shock 5 C to 50 C (23 F to 122 F) 40 C to 70 C (40 F to 158 F) 0 % to 95 % non-condensing 322 mm x 197 mm x 109 mm (12 11/16 in x 7 3/4 in x 4 5/16 in) 2.5 kg (5.4 lb) < 1.5 g at 10 Hz to 500 Hz (on three main axes) < 760 mm on six sides and eight main edges (according to GR-196-CORE)
ACCESSORIES FP1 FP5 GP-10-069 GP-302 GP-308 GP-2001 GP-2011 GP-2012 GP-2013 GP-2014 FP1 200X Fiber Inspection Probe FP5 400X Fiber Inspection Probe Semi-rigid FTB-200 carrying case USB mouse DC car adapter/inverter USB keyboard Compact Flash Ethernet WiFi card Compact Flash Bluetooth card Compact Flash RS-232 card Compact Flash memory 1 GB card GP-2015 GP-2016 GP-2017 GP-2019 GP-2020 GP-2021 GP-2023 GP-2024 GP-2025 GP-2027 (A-E-I-J-S-U) Compact Flash memory 2 GB card 10 feet RJ-45 LAN cable Spare FTB-200 battery USB micro drive 1 GB USB micro drive 2 GB Spare AC charger FTB-200 Spare neck strap Spare belt strap Spare battery door Portable printer. Specify: A-North America, E-Europe, I-India, J-Japan, S-Australia and New-Zealand, U-United-Kingdom
PM-200 Built-in Power Meter Specifications 4 Calibrated wavelengths (nm) Power range (dBm) Uncertainty (%) 5 Display resolution (dB) InGaAs 850, 1300, 1310, 1490, 1550, 1625, 1650 10 to 86 (InGaAs) 26 to 64 (GeX) 5 % 3 pW (InGaAs) 5 % 0.4 nW (GeX) 0.01 = max to 76 dBm 0.1 = 76 dBm to 86 dBm 1 = 86 dBm to min 0.01 = max to 54 dBm 0.1 = 54 dBm to 64 dBm 1 = 64 dBm to min Max to 63 dBm for InGaAs Max to 40 dBm for GeX 270/1000/2000
GeX
Notes 1. All specifications valid at 23 C (73 F). 2. Standard recharge time is 3 h. Recharge temperature: 0 C to 35 C (32 F to 95 F). 3. Not including internal batteries. Battery maximum storage temperature 60 C (140 F).
4. At 23 C 1 C, 1550 nm and FC connector. With modules in idle mode. Battery operated. 5. Up to 5 dBm 6. For 0.05 dB, from 18 C to 28 C
281
Technical Specifications
OTDR
OTDR
All specifications below apply to the FTB-7200D-12CD-23B multimode (MM)/singlemode (SM) model and the FTB-7200D-12CD multimode-only version.
Model
FTB-7200D-12CD-23B/FTB-7200D-12CD
Wavelength (nm)
850 20/1300 20 1310 20/1550 20
Distance range (km) Pulse width (ns) Launch conditions5 Linearity (dB/dB) Loss threshold (dB) Loss resolution (dB) Sampling resolution (m) Sampling points Distance uncertainty6 (m) Measurement time Real-time refresh (s) Stable source output power7 (dBm) Visual fault locator (optional)
Multimode: 0.1, 0.3, 0.5, 1.3, 2.5, 5, 10, 20, 40 Singlemode: 1.3, 2.5, 5, 10, 20, 40, 80, 160, 260 Multimode: 5, 10, 30, 100, 275, 1000 Singlemode: 5, 10, 30, 100, 275, 1000, 2500, 10 000, 20 000 Class CPR 1 or 2 0.03 0.01 0.001 Multimode: 0.04 to 2.5 Singlemode: 0.04 to 5 Up to 128 000 (0.75 + 0.0025 % x distance) User-defined (60 min maximum) Guaranteed: 0.4 1.5 (1300 nm), 7 (1550 nm) Laser, 650 nm 10 nm CW, typical Pout in 62.5/125 m: 3 dBm (2 mW)
Notes 1. All specifications valid at 23 C 2 C (73.4 F 3.6 F) with an FC/PC connector, unless otherwise specified. 2. Typical dynamic range with longest pulse and three-minute averaging at SNR = 1. 3. Multimode dynamic range is specified for 62.5 m fiber; a 3 dB reduction is seen when testing 50 m fiber. 4. Typical dead zone for multimode reflectance below 35 dB and singlemode reflectance below 45 dB, using a 5 ns pulse. 5. Controlled launch conditions allow 50 m and 62.5 m multimode fiber testing. 6. Does not include uncertainty due to fiber index and sampling resolution. 7. Typical output power is given at 1300 nm for multimode output and 1550 nm for singlemode output.
282
FTB-200
Technical Specifications
OTDR
All specifications below apply to the FTB-7200D-12CD-23B multimode (MM)/singlemode (SM) model and the FTB-7200D-12CD multimode-only version. Model Wavelength (nm) Dynamic range2, 3 (dB) FTB-7200D-12CD-23B/FTB-7200D-12CD 850 20/1300 20 27/26 1310 20/1550 20 37/35 Distance range (km) Multimode: 0.1, 0.3, 0.5, 1.3, 2.5, 5, 10, 20, 40 Singlemode: 1.3, 2.5, 5, 10, 20, 40, 80, 160, 260 Pulse width (ns) Multimode: 5, 10, 30, 100, 275, 1000 Singlemode: 5, 10, 30, 100, 275, 1000, 2500, 10 000, 20 000 5 Launch conditions Class CPR 1 or 2 Linearity (dB/dB) 0.03 Loss threshold (dB) 0.01 Loss resolution (dB) 0.001 Sampling resolution (m) Multimode: 0.04 to 2.5 Singlemode: 0.04 to 5 Sampling points Up to 128 000 Distance uncertainty6 (m) (0.75 + 0.0025 % x distance) Measurement time User-defined (60 min maximum) Real-time refresh (s) Guaranteed: 0.4 Stable source output power7 (dBm) 1.5 (1300 nm), 7 (1550 nm) Visual fault locator (optional) Laser, 650 nm 10 nm CW, typical Pout in 62.5/125 m: 3 dBm (2 mW) Event dead zone4 (m) Attenuation dead zone4 (m) 1/1 3/4 1/1 4.5/5 Notes 1. All specifications valid at 23 C 2 C (73.4 F 3.6 F) with an FC/PC connector, unless otherwise specified. 2. Typical dynamic range with longest pulse and three-minute averaging at SNR = 1. 3. Multimode dynamic range is specified for 62.5 m fiber; a 3 dB reduction is seen when testing 50 m fiber. 4. Typical dead zone for multimode reflectance below 35 dB and singlemode reflectance below 45 dB, using a 5 ns pulse. 5. Controlled launch conditions allow 50 m and 62.5 m multimode fiber testing. 6. Does not include uncertainty due to fiber index and sampling resolution. 7. Typical output power is given at 1300 nm for multimode output and 1550 nm for singlemode output.
Singlemode OTDR Module Specifications8 Model Wavelength Dynamic (nm) range at 10 s9 (dB) FTB-7200D-XXX 1310 20/1550 20 35/34 FTB-7300D-XXX 1310 20/1490 10/1550 20/1625 10 38/34/37/35 FTB-74XXB-B 1310 20/1410 10/1550 20/1625 10 40/37/4012/38 FTB-74234C 1310 20/1550 20/1625 10 41/40/38 FTB-75XXB-B11 1310 20/1550 20/1625 10 43.5/43.513/41.5 FTB-7503B-B-ER11 1550 20 44 For complete details on all available configurations, refer to the Ordering Information General Specifications Distance range (km) Pulse width (ns) Linearity (dB/dB) Loss threshold (dB) Loss resolution (dB) Sampling resolution (m) Sampling points Distance uncertainty14 (m) Measurement time Real-time refresh (s) Stable source output power15 (dBm) Visual fault locator (optional) 7200D/7300D series 1.25, 2.5, 5, 10, 20, 40, 80, 160, 260 5, 10, 30, 100, 275, 1000, 2500, 10 000, 20 000 0.03 0.01 0.001 0.04 to 5 Up to 128 000 (0.75 + 0.0025 % x distance) User-defined (60 min maximum) Guaranteed: 0.4 Typical: 0.3 8 (7200D), 4.5 (7300D) Laser, 650 nm 10 nm CW, typical Pout in 62.5/125 m: 3 dBm (2 mW) 7400B-B/ 7500B-B/74234C-B series 1.25, 2.5, 5, 10, 20, 40, 80, 160, 260 10, 30, 100, 275, 1000, 2500, 10 000, 20 000 0.05 0.01 0.001 0.08 to 5 Up to 52 000 (1 + 0.0025 % x distance) User-defined (60 min maximum) 1 5 Laser, 650 nm 10 nm CW, Pout maximum: 800 W Dynamic range at 20 s9 (dB) 37/35 39/35/38/36 41.5/38.5/40.512/39 42.5/41.5/39.5 45/4513/43 45.5 section. Event dead zone10 (m) 1/1 1/1/1/1 3/3/3/3 3/3/3 3/3/3 3 Attenuation dead zone10 (m) 4.5/5 4.5/5.5/5/5 10/10/15/16 8/10/10 10/15/16 15
Notes 8. All specifications valid at 23 C 2 C (73.4 F 3.6 F) with an FC/PC connector, unless otherwise specified. 9. Typical dynamic range with a three-minute averaging at SNR = 1. 10. Typical dead zone of singlemode modules for reflectance below 45 dB, using a 10 ns pulse (5 ns pulse for 7200D and 7300D). 11. Typical dynamic range on NZDS fiber with a three-minute average at SNR = 1.
12. Typical dynamic range at 1550 nm for the FTB-7423B-B configuration is 2 dB lower at 10 s and 1 dB lower at 20 s. 13. Typical dynamic range at 1550 nm for the FTB-7503B-B and FTB-7523B-B configuration is 2 dB lower. 14. Does not include uncertainty due to fiber index and sampling resolution. 15. Typical output power value at 1550 nm.
283
Technical Specifications
MultiTest
MultiTest
SPECIFICATIONS1
External Power Meter Detector type Measurement range (dBm) Uncertainty2, 3 Wavelength range (nm) Display resolution2 (dB) Calibrated wavelengths Recommended recalibration period (years) Automatic offset nulling4 Measurement-distance units Sources Wavelengths5 (nm) Emitter type Laser Minimum output power5 (dBm) Spectral width6 (nm) Stability7 (8 hours) (dB) FasTesT Wavelengths (nm) Loss range8 (dB) Loss precision9 (repeatability) (dB) Side-by-side Loopback Length measurement range (km) Length measurement uncertainty10 (10 m + 1 % x length) Dedicated ORL ORL range (APC / UPC) (dB) ORL uncertainty9 (dB) Resolution2 (dB) General Specifications Size (H x W x D) Weight Temperature operating storage12 Relative humidity Warranty (years) Standard Accessories User guide, Certificate of Calibration, connector adapter (FOA) according to chosen connector, mandrel and alcohol cleaning pads. 9.6 cm x 2.5 cm x 26 cm 0.5 kg 0 C to 50 C 40 C to 70 C 0 % to 95 % non-condensing 3 (3 3/4 in x 1 in x 10 1/4 in) (1.1 lb) (32 F to 122 F) (40 F to 158 F) FTB-3932 Ge 10 to 70 5 % 0.1 nW 800 to 1650 0.01 40 3 Yes FTB-3932X GeX 26 to 55 5 % 3 nW 800 to 1650 0.01 42 FTB-3933 InGaAs 6 to 73 5 % 0.05 nW 800 to 1650 0.01 40 3 Yes -5 1310 20 1490 10 1550 20 Laser 1/7/4 5/ 5/ 5 0.05 -5 1310 1490 1550 56 0.15 0.25 200 Laser 1550 20 45 40 -12C (second port) 850 25 1300 +50/10 LED 30/30 (50/125 m) 50/135 0.05 -12C (second port) 850 1300 40 0.15 0.25 5 VFL9 Emitter type Wavelength (nm) Output power (dBm) -12D (second port) 850 25 1300 +50/10 LED 24/24 (62.5/125 m) 50/135 0.05 -12D (second port) 850 1300 46 0.15 0.25 5 Laser 650 3
3 Yes kilometers, meters, kilofeet, feet, miles -4 1310 20 1550 20 1625 10 Laser 1/4/7 5/ 5/ 5 0.05 -4 1310 1550 1625 56 0.15 0.25 200
Standard 1310 20 1550 20 Laser 1/1 5/ 5 0.05 Standard 1310 1550 60 0.15 0.25 200
Talk Set Emitter type Wavelength (nm) Dynamic range at 1550 nm (dB) Dynamic range MM11 (dB)
Notes: 1. At 23 C 1 C and 1550 nm with FC connector and on batteries, unless otherwise specified. 2. Resolution, uncertainty and linearity are functions of input power; uncertainty is valid at calibration conditions. 3. Traceable to NIST; up to 20 dBm for GeX. 4. Power of > 45 dBm for Ge, > 30 dBm for GeX and > 57 dBm for InGaAs. 5. In High source mode. 6. As defined by Telcordia TR-TSY-000887, rms for lasers and at 3 dB for LEDs; typical values for LEDs. 7. After a warmup time of 6 minutes, in CW source mode. 8. Typical value, at 1550 nm for SM and 850 nm for MM. 9. Typical value. 10. For fiber length 120 km. 11. For graded-index MM fibers; typical. 12. Without batteries.
284
FTB-200
Index
Index
! ................................................................ 189 ***** indication ........................................ 152 analysis after acquisition ............................. 85, 139 fiber span............................................. 141 thresholds, detection ................... 129, 136 thresholds, pass/fail ............................... 86 analyzing a trace. see analysis, after acquisition analyzing results........................................ 182 application, starting .................................... 26 applications, typical................................... 182 Att. column in events table........................ 112 attenuation fiber section ........................................... 86 LSA measurement method................... 150 measurement....................................... 150 reflectance ........................................... 152 two-point measurement method ......... 150 Auto mode acquiring traces ..................................... 69 selecting test wavelength ................ 67, 73 setting fiber parameters......................... 70 testing ................................................... 67 automatic acquisition time. see autorange acquisition time automatic zoom reset................................ 124 autonaming MultiTest...................................... 184, 187 OTDR...................................................... 65 autorange acquisition time.......................... 77 average loss in Trace Info. tab ................... 128 average splice loss in Trace Info. tab ......... 128
A
AC LED ...................................................... 4, 5 AC requirements ......................................... 13 accessing power meter.......................................... 35 source.................................................. 165 accuracy, trace ............................................ 84 acquiring traces Advanced mode............................. 73, 105 Auto mode ............................................ 69 Template mode...................................... 95 acquisition automatic, in Advanced mode............... 73 Advanced mode..................................... 73 Auto mode ............................................ 67 changing resolution............................... 80 custom time values.............................. 105 date ............................................. 160, 161 duration............................................... 128 interrupting ..................................... 67, 74 pulse width used ................................. 128 setting analysis detection thresholds ... 136 Template mode................................ 91, 95 time, autorange..................................... 77 wavelength used ................................. 128 active trace selection ................................. 122 Advanced mode acquiring traces ..................................... 73 acquisition-specific fiber parameters ... 127 setting the autorange acquisition time .. 77 testing ................................................... 73 after-sales service ...................................... 276
B
backreflection measurement ..................... 207 basic OTDR theory ....................................... 60 battery charge status ....................................... 253 clock .................................................. 7, 31 LED ...................................................... 4, 5
285
Index
maintenance recommendations .......... 253 recharging ........................................... 254 replacing or removing ......................... 258 buttons scroll, in the events table ..................... 109 trace editing, in events table ............... 109 buttons, zoom. see controls, zoom
C
cable and fiber names ............................... 187 calibrated wavelengths ............................. 181 calibrating the touchscreen......................... 27 calibration certificate............................................. 267 interval ................................................ 267 Canadian Standards Association (CSA).......... ix cancelling dark current effects ............ 37, 196 capacitors.................................................... 12 car outlet, charging battery with............... 254 caution of personal hazard................................... 8 of product hazard.................................... 8 certification information ............................... ix changing batteries .................................... 258 circuit performance ............................. 37, 196 cleaning detector ports...................................... 252 EUI connectors..................................... 250 fiber ends ...................................... 64, 186 front panel .......................................... 249 clearing power meter display .............................. 45 traces from the display (OTDR) ............ 123 clock battery. see battery cold shutdown ............................................ 25 color of traces in display ........................... 110 communication talk set................................................. 234 text messages ...................................... 231 component under test. see DUT configuring application ......................183190
connector, threshold loss ............................ 86 connectors, cleaning ................................. 250 connectors, illustration of.................. 181182 controls, zoom .......................................... 125 conventions, safety........................................ 8 CR2032-type battery. see battery Create Ref./Template OTDR. seeTemplate mode CSA................................................................ix Cumul. column in events table .................. 112 cumulative loss .......................................... 112 current, electrical......................................... 13 customer service........................................ 279
D
dark current effects, eliminating.......... 37, 196 data points .................................................. 84 data, transferring ...................................... 182 date of trace acquisition.................... 160, 161 decrementation, file name .......................... 65 default trace name ...................................... 65 definition of the OTDR................................. 55 deleting events .......................................... 134 delimiting fiber span ................................. 114 description LED panel............................................. 4, 5 ORL meter ............................................ 203 power meter ........................................ 193 description of event types ......................... 169 detailed report........................................... 162 detecting module ........................................ 19 detection, modulation............................... 181 detector see. power meter detector port, cleaning .............................. 252 detector types ........................................... 181 device under test. see DUT dial Distance ................................................. 80 moving .................................................. 82 Pulse ...................................................... 80 Time....................................................... 80
286
FTB-200
Index
disappearing marker ................................. 144 displaying fiber sections ....................................... 114 fiber span ............................................ 124 injection level in events table............... 114 pass/fail messages ................................. 87 traces................................................... 121 distance between events ................................... 145 equation ................................................ 60 range ..................................................... 80 distance unit ............................................. 183 dual-wavelength trace color in display ...... 110 DUT ........................... 197, 200, 205, 212, 215
E
electronic offsets, eliminating ............. 37, 196 ending talk set communication ................. 236 end-of-fiber detection threshold ..................... 129, 136 event ................................................... 169 equation of distance ................................... 60 equipment returns .................................... 279 establishing talk set communication ......... 234 EUI baseplate ....................................... 63, 185 connector adapter ......................... 63, 185 dust cap......................................... 63, 185 EUI connectors, cleaning ........................... 250 event deleting ............................................... 134 description of types ............................. 169 difference with fault .............................. 60 distance measurement......................... 145 effect of setting as span start/end . 88, 141 fault notification.................................... 87 insertion .............................................. 132 location ....................................... 112, 113 loss. see event loss marking fault in events table ................. 87 name, displaying ................................. 111
non-reflective, averaged loss................ 128 number ................................................ 112 reflectance ........................................... 112 threshold, pass/fail................................. 86 thresholds, pass/fail message................. 87 undeletable.......................................... 134 event loss average, in Trace Info. tab ................... 128 in events table ..................................... 112 measurement....................................... 146 total, in Trace Info. tab ........................ 128 event types description ........................................... 169 continuous fiber................................... 170 echo..................................................... 179 end of analysis ..................................... 171 end-of-fiber.......................................... 169 fiber section ......................................... 176 launch level.......................................... 175 merged reflective event ....................... 177 non-reflective event ............................. 172 positive event....................................... 174 reflective event..................................... 173 reflective event (possible echo) ............ 180 span end .............................................. 169 span start............................................. 169 events table description ........................................... 109 locating event ...................................... 113 scroll buttons ....................................... 109 trace editing buttons ........................... 109 exclamation mark ...................................... 189 EXFO service centers .................................. 280 EXFO universal interface. see EUI EXFO Web site ........................................... 275
287
Index
F
failed events, flagging................................. 87 FAQs.......................................................... 275 FasTesT thresholds............................................ 189 wavelengths, selecting ........................ 212 fault difference with event............................. 60 marking in events table ......................... 87 notification, for events .......................... 87 favorite wavelengths ................................. 181 features ..................................................... 181 fiber attenuation.......................................... 112 identifying by name....................... 65, 159 identifying visually ............................... 165 measuring optical power ....................... 41 section attenuation................................ 86 sections display.................................... 114 span length ......................................... 128 type in Trace Info. tab.......................... 128 see also fiber span ................................. 88 fiber and cable names ............................... 187 fiber ends, cleaning............................. 64, 186 fiber length measurement......... 181, 211, 221 fiber parameters, setting acquisition-specific (Advanced mode).. 127 default ................................................... 78 fiber span analysis ................................................ 141 average loss in Trace Info. tab ............. 128 average splice loss in Trace Info. tab.... 128 delimitation ......................................... 114 length in Trace Info. tab ................ 88, 128 setting ................................................... 88 total loss in Trace Info. tab .................. 128 zooming (automatic) ........................... 124 fiber under test. see DUT file name, in trace display ......................... 116 flagging failed events.................................. 87 forced selection of test wavelength ...... 70, 76
four-point measurement method vs. LSA .. 146 Fresnel reflection ......................................... 61 front panel, cleaning ................................. 249 FTB-200 shutting down ............................... 25 FTB-200 trace format................................. 155 FTTx mode/wavelengths ............................ 212 FTTx results ................................................ 182
G
General tab................................................ 116 grid display................................................ 116
H
hard drive LED ........................................... 4, 5 hazard, laser radiation............................. 911 headset, using ........................................... 235 helix factor admissible values ................................... 78 in Trace Info. tab.................................. 129 modification ........................................ 127 setting ................................................... 78 hiding traces.............................................. 121 high-power source .................................... 181 high-resolution feature................................ 84
I
identification label..................................... 276 identifying fiber under test........................ 165 incrementation, file name ........................... 65 indoor use ................................................... 12 injection level, in events table.................... 114 input current ............................................... 13 inserting a module ...................................... 17 insertion loss (IL). see loss installing unit .............................................. 12 intermittent signal............................... 50, 230
288
FTB-200
Index
IOR in Trace Info. tab ................................. 129 modification ........................................ 127 obtaining ............................................... 78 setting ................................................... 78
LSA measurement method definition ............................................. 150 vs. four-point ....................................... 146 vs. two-point........................................ 150
L
label, identification ................................... 276 laser safety information ...........................911 laser safety LED ......................................... 4, 5 laser source. see source laser, using OTDR as source....................... 165 launch level ............................................... 260 least-square approximation. see LSA LED panel description................................ 4, 5 length unit ................................................ 183 length, fiber .............................. 181, 211, 221 light source. see source list of favorite wavelengths ............... 181, 194 Loc. in events table.................................... 112 locating events .......................................... 113 loopback referencing method ................... 214 loss average for fiber span.......................... 128 average splice ...................................... 128 connector .............................................. 86 cumulative for fiber span..................... 128 in events table ..................................... 112 measurement....................................... 146 measurement, positioning markers ..... 149 non-reflective events average .............. 128 splice ..................................................... 86 loss measurement description........................................... 181 performing .......................................... 200 reference ..................................... 197, 214 saving results ....................................... 202 thresholds............................................ 189 see also power meter
M
mail feature. see text messages maintenance battery ................................................. 253 detector ports ...................................... 252 EUI connectors ..................................... 250 front panel........................................... 249 general information ............................. 249 marker disappearing on zoom ......................... 144 too close to one another...................... 144 maximum input current............................... 13 measurement attenuation (two-point and LSA) ......... 150 event distance...................................... 145 event loss ............................................. 146 event RBS level ..................................... 145 ORL ...................................................... 153 units..................................................... 118 with power meter .................................. 41 measurement units.................................... 183 measuring loss ...................................................... 200 ORL ...................................................... 203 power .................................................. 200 message feature. see text messages modulation detection of ................................. 181, 201 source .......................................... 181, 227 VFL....................................................... 229 module detection ............................................... 19 insertion................................................. 17 removal.................................................. 17
289
Index
mounting EUI connector adapter ........ 63, 185 multimode port................................. 211, 227 multiple referencing .................................. 214 multiwavelength trace file, displaying....... 121
P
parameters Advanced mode..................................... 77 helix factor............................................. 78 IOR......................................................... 78 Rayleigh backscatter coefficient ............. 78 Template mode...................................... 92 trace display......................................... 116 pass/fail message display ............................. 87 pass/fail test disabling ................................................ 87 enabling................................................. 87 when to perform ................................... 87 pass/fail thresholds. see thresholds performing null measurement .......................... 37, 196 optical power measurement .................. 41 ORL measurement................................ 207 ORL zero measurement ........................ 205 power or loss measurement................. 200 photodetector ............................................. 60 PON testing ............................................... 182 ports, illustration of........................... 181182 power LED ................................................. 4, 5 power measurement. see loss power meter accessing ............................................... 35 buttons description................................ 36 clearing the display ................................ 45 creating a report .................................... 46 description................................... 181, 193 detector types ...................................... 181 display ................................................. 193 measurement......................................... 41 modulated signal detection ................. 201 printing a report .................................... 48 recalling results ...................................... 44 reference values ..................................... 40 results .................................................... 43
N
naming reference trace....................................... 94 trace automatically ................................ 65 naming results automatically ............ 184, 187 non-reflective event, averaged loss ........... 128 nulling offsets. see offset nulling number in events table ..................................... 112 of the event ......................................... 112
O
offset nulling............................... 37, 181, 196 opening trace file ...................................... 107 operating light source ............................... 165 optical detector performance.............. 37, 196 optical return loss. see ORL optical return loss. see ORL measurement option used at start-up ............................... 32 ORL measurement description................................... 181, 203 performing .......................................... 207 thresholds............................................ 189 ORL zero measurement, performing ......... 205 ORL, module required for calculations ...... 153 OTDR basic theory ........................................... 60 definition............................................... 55 internal components ............................. 61 using as laser source............................ 165 OTDR software file compatibility between versions...... 156 launch level.......................................... 260
290
FTB-200
Index
setting thresholds .................................. 38 thresholds.............................................. 38 wavelength list .................................... 194 power reference, setting ........................... 197 power source, AC ........................................ 13 precision, trace............................................ 84 prefix, naming........................................... 187 product features ............................................... 181 identification label............................... 276 specifications ............................... 275, 281 protective cap ........................................... 252 pulse dial ........................................................ 80 in Trace Info. tab ................................. 128 setting width ......................................... 80
R
radiation hazard, laser..............................911 RBS (Rayleigh backscatter) description............................................. 61 in Trace Info. tab ................................. 129 modification ........................................ 127 obtaining ............................................... 78 setting ................................................... 78 RBS level measurement event.................... 145 re-analyzing a trace ................................... 139 recalibration .............................................. 267 recalling results, power meter ..................... 44 receiving text message .............................. 233 red, value in .............................................. 189 reference mode ..................................................... 40 values, setting........................................ 40 reference measurement loopback method ................................ 214 multiple ............................................... 214 power meter........................................ 197 side-by-side method ............................ 214
reference trace naming .................................................. 94 parameters............................................. 92 selection............................................... 101 reference, zero power.......................... 37, 196 Refl. column in events table ...................... 112 reflectance attenuation .......................................... 152 detection threshold...................... 129, 136 of event ............................................... 112 of non-reflective events........................ 152 source of inaccurate measurements....... 79 removing a module ..................................... 17 repairing unit............................................... 12 replacing or removing battery ................... 258 report content ................................................ 162 creating for power meter results............ 46 of trace ................................................ 159 printing.......................................... 48, 162 resetting fiber parameters, Auto mode ....... 70 restrictions Ref. Creation/Template mode .... 92 results autonaming ......................................... 187 ORL measurement................................ 209 processing features .............................. 182 saving .................................................. 184 return loss. see ORL measurement return merchandise authorization (RMA) .. 279 ring volume ............................................... 236
S
safety caution..................................................... 8 conventions ............................................. 8 information........................................ 911 warning ................................................... 8 same pulse and time for all wavelengths..... 81 saving format, FTB-200 ................................... 155 power/loss results ................................ 202
291
Index
results automatically............................ 184 trace in different formats..................... 155 scroll buttons ............................................ 109 selecting active trace .......................................... 122 Automatic OTDR test wavelength .... 67, 73 reference trace..................................... 101 test wavelength, automatically........ 70, 76 wavelength in Auto mode ............... 67, 73 sending text message................................ 232 service and repairs..................................... 279 service centers ........................................... 280 setting fiber span .............................................. 88 pass/fail thresholds ................................ 86 power reference .................................. 197 power thresholds (power meter) ........... 38 reference values..................................... 40 source wavelength............................... 228 thresholds............................................ 189 shipping to EXFO ...................................... 279 shutdown cold vs. warm ........................................ 25 FTB-200 ................................................. 25 side-by-side referencing method ............... 214 signal, modulating ...... 50, 227, 228, 229, 230 signal-to-noise ratio .................................... 81 singlemode port................................ 211, 227 software. see application source accessing ............................................. 165 activating............................................. 228 function overview ................................ 165 high-power.......................................... 181 modulating signal................ 181, 227, 228 multimode........................................... 181 operating............................................. 165 operation and display .......................... 227 setting wavelength .............................. 228 singlemode .......................................... 181 status................................................... 227 source see also laser
span end description........................................... 169 effect of setting on events table .... 88, 141 span position, updating ............................ 141 span start description........................................... 169 effect of setting on events table .... 88, 141 specifications, product ...................... 275, 281 splice loss average, in Trace Info. tab ................... 128 detection threshold...................... 129, 136 threshold ............................................... 86 start-up option ............................................ 32 stopping trace acquisition ..................... 67, 74 storage requirements ................................ 249 storing changing default trace name ................. 65 trace autonaming .................................. 65 suffix, naming ........................................... 187 summarized report .................................... 162 swapping traces ........................................ 142 symbols, safety .............................................. 8 system under test. see DUT
T
talk set compatibility........................................ 234 description........................................... 234 ending communication ........................ 236 establishing communication ................ 234 placing a call........................................ 235 port...................................................... 234 receiving a call ..................................... 236 voice and ring volumes ........................ 236 technical specifications...................... 275, 281 technical support....................................... 276 temperature for storage ............................ 249 Template mode acquiring the reference trace ................. 94 acquiring traces ..................................... 95 applying parameters to other traces ...... 92
292
FTB-200
Index
description............................................. 91 naming the reference trace.................... 94 reference trace naming.......................... 94 restrictions............................................. 92 selecting reference trace...................... 101 setting parameters................................. 92 test settings used................................... 92 testing ................................................... 91 Template OTDR. see Template mode test tools light source.......................................... 227 ORL meter............................................ 203 power meter........................................ 193 test wavelength, forced selection.......... 70, 76 test, settings used in Template mode.......... 92 testing Advanced mode..................................... 73 Auto mode ............................................ 67 Template mode...................................... 91 text messages compatibility........................................ 231 description................................... 182, 231 modifying ............................................ 232 receiving .............................................. 233 sending................................................ 232 theory, OTDR............................................... 60 thresholds ......................................... 182, 189 analysis detection ................................ 136 connector loss ....................................... 86 detection ............................................. 129 end-of-fiber detection ......................... 136 fault notification.................................... 87 fiber section attenuation ....................... 86 pass, fail, warning ................................. 87 pass/fail message ................................... 87 power .................................................... 38 reflectance detection ................... 129, 136 setting pass/fail...................................... 86 setting, power meter ............................. 38 splice loss .............................................. 86 splice loss detection..................... 129, 136 trace analysis ......................................... 86
Time dial custom-time mode............................... 105 setting ................................................... 80 time in Trace Info. tab ............................... 128 time, custom values................................... 105 tools talk set ................................................. 234 visual fault locator ............................... 229 see also test tools total loss in Trace Info. tab ........................ 128 touchscreen calibration ............................... 27 trace accuracy................................................. 84 acquisition in Advanced mode ............... 73 acquisition in Auto mode....................... 69 acquisition in Template mode................ 95 analysis ................................................ 139 analysis detection thresholds ............... 136 autonaming ........................................... 65 changing default name.......................... 65 color in trace display ............................ 110 compatibility between ToolBox versions156 editing buttons .................................... 109 export formats ..................................... 155 opening file.......................................... 107 pass/fail analysis threshold..................... 86 purpose of swapping ........................... 142 re-analyzing ......................................... 139 stopping the acquisition .................. 67, 74 storage, in different formats ................ 155 swapping ............................................. 142 trace display behavior on zoom................................ 125 clearing traces...................................... 123 description ........................................... 109 displaying file name ............................. 116 parameters........................................... 116 trace formats, FTB-200 .............................. 155 Trace Info. tab average loss ......................................... 128 average splice loss................................ 128 backscatter .......................................... 129
293
Index
displaying traces .................................. 121 end-of-fiber threshold ......................... 129 fiber type used..................................... 128 helix factor........................................... 129 hiding traces........................................ 121 IOR ...................................................... 129 pulse.................................................... 128 reflectance threshold ........................... 129 span length ......................................... 128 splice loss threshold............................. 129 time ..................................................... 128 total loss.............................................. 128 wavelength.......................................... 128 trace report creating ............................................... 159 printing ............................................... 162 transferring data ....................................... 182 transportation requirements ............. 249, 276 two-point attenuation.......................................... 150 measurement method vs. LSA ............. 150 measurement method, definition ........ 150 type in events table ..................................... 112 of event ............................................... 112 typical applications ................................... 182
V
ventilation ................................................... 12 VFL 1 Hz pulsed output .............................. 168 continuous wave output ...................... 168 modulating signal .................. 50, 229, 230 operation and display .................... 50, 230 performing a test ........................... 50, 230 status ................................................... 229 using.................................................... 165 visual fault locator. see VFL voice volume ............................................. 236 volumes (ring and voice) ........................... 236
W
warm shutdown .......................................... 25 warning thresholds...................................... 87 warranty certification.......................................... 278 exclusions ............................................ 278 general................................................. 277 liability ................................................. 278 null and void........................................ 277 wavelength indication in Trace Info. tab ................. 128 selecting, in Auto mode ................... 67, 73 wavelengths calibrated............................................. 181 FasTesT................................................. 212 list of favorite............................... 181, 194 source .................................................. 228
U
undeletable events .................................... 134 unit installing................................................ 12 repairing ................................................ 12 ventilation ............................................. 12 unit recalibration....................................... 267 units of measurement ............................... 183 updating span position ............................. 141 using light source...................................... 165
Z
zero measurement, ORL ............................ 205 zero-power reference .......................... 37, 196 zoom controls................................................ 125 resetting automatically ........................ 124 window display.................................... 116
294
FTB-200
P/N:1043882 www.exfo.com info@exfo.com CORPORATE HEADQUARTERS EXFO AMERICA EXFO EUROPE 400 Godin Avenue 3701 Plano Parkway, Suite 160 Le Dynasteur 10/12, rue Andras Beck Quebec (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 Fax: 1 418 683-2170 Plano TX, 75075 USA Tel.: 1 972 907-1505 92366 Meudon la Fort Cedex FRANCE Tel.: +33.1.40.83.85.85 Fax: +33.1.40.83.04.42 SINGAPORE 169876 Tel.: +65 6333 8241 Fax: +65 6333 8242 1 800 663-3936
EXFO ASIA-PACIFIC 151 Chin Swee Road #03-29, Manhattan House TOLL-FREE (USA and Canada)
2006 EXFO Electro-Optical Engineering Inc. All rights reserved. Printed in Canada (2006-05)