Académique Documents
Professionnel Documents
Culture Documents
Project Job No Company Designer Remarks Software File Name Working Units Design Code CSICOL (Version: 8.4 (Rev. 0)) C:\Program Files\Computers and Structures\CSiCol 8 \Column1 Metric (mm, Ton, Ton-m, Ton/m^2) ACI-318-99
Column:Column1
Basic Design Parameters
Caption Default Concrete Strength, Fc Default Concrete Modulus, Ec Maximum Concrete Strain Rebar Set Default Rebar Yeild Strength, Fy Default Rebar Modulus, Es Default Cover to Rebars Maximum Steel Strain Transverse Rebar Type Total Shapes in Section Consider Slenderness = Column1 = 2000 = 2100000 = 0.003 = ASTM = 27500 = 20000000 = 0.040 = Infinity = Ties =1 = No ton/m^2 ton/m^2 in/in ton/m^2 ton/m^2 m
Section Diagram
Cross-section Shapes
Shape Rectangular Shape Width m 0.611 Height m 0.916 Conc Fc ton/m^2 2000.000 S/S Curve ACI-Whitney Rectangular Rebars 6-d 12+4-d 20
Rebar Properties
Sr.No 1 2 3 4 5 6 7 8 9 10 Designation d 20 d 20 d 20 d 20 d 12 d 12 d 12 d 12 d 12 d 12 6-d 12+4-d 20 Total Area = Steel Ratio = Area m^2 0.0003 0.0003 0.0003 0.0003 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 Cord-X m 0.040 0.040 0.571 0.571 0.040 0.040 0.040 0.571 0.571 0.571 Cord-Y m 0.040 0.876 0.876 0.040 0.249 0.458 0.667 0.667 0.458 0.249 Fy ton/m^2 27500 27500 27500 27500 27500 27500 27500 27500 27500 27500 S/S Curve Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic Elasto-Plastic
0.0020 0.35
m^2 %
Transformed Properties: Base Material Area, A Inertia, I33 Inertia, I22 Inertia, I32 Radius, r3 Radius, r2
m^3 m^3 m^3 m^3 m^3 m^3 m^4 m^2 m^2 Deg m^4 m^4
Framing Along-X
Total C/C Length, Lc Unsupported Length, Lu Framing Type Framing Case K Factor, Braced Kl/r, Braced K Factor, Unbraced Kl/r, Unbraced = 3.648 = 3.040 =4 =0 = 1.00 = 17.24 = 1.00 = 17.24 m m
Framing Along-Y
Total C/C Length, Lc Unsupported Length, Lu Framing Type Framing Case K Factor, Braced Kl/r, Braced K Factor, Unbraced Kl/r, Unbraced = 3.648 = 3.040 =4 =0 = 1.00 = 11.49 = 1.00 = 11.49 m m
Result Summary
Sr.No 1 Combination Combination1 Pu (ton) 227.00 Cap. Ratio-Bot Cap. RatioTop 0.848 1.205 Remarks Capacity Not OK
Bracing Condition Non-Sway Part of Loading: Design Load, Pu Sustained Load, Pud End Moment, M1 End Moment, M2 Minimum Moment, Mmin Design Moment, Mc Creep Factor, Bd Section Stiffness, EI For Pcr Euler Buckling Load, Pcr Moment Factor, Cm Non-Sway Moment Magnifier Magnified Moment, Mc
= Non-Sway = 0.00 = 0.00 = 0.00 = 0.00 = 0.00 = 0.00 = 0.00 = 0.00E+00 = 0.00 = 0.00 = 1.00 = 27.74 ton ton ton-m ton-m ton-m ton-m ton-m^2 ton ton-m
Combination1- Along Y
Bracing Condition Non-Sway Part of Loading: Design Load, Pu Sustained Load, Pud End Moment, M1 End Moment, M2 Minimum Moment, Mmin Design Moment, Mc Creep Factor, Bd Section Stiffness, EI For Pcr Euler Buckling Load, Pcr Moment Factor, Cm Non-Sway Moment Magnifier Magnified Moment, Mc = Non-Sway = 0.00 = 0.00 = 0.00 = 0.00 = 0.00 = 0.00 = 0.00 = 0.00E+00 = 0.00 = 0.00 = 1.00 = 27.74 ton ton ton-m ton-m ton-m ton-m ton-m^2 ton ton-m
Load-Moment Interaction