Académique Documents
Professionnel Documents
Culture Documents
June 2011
Wealth Unearthed
The copyright to this catalogue vests in AEL Mining Services Limited. Any unauthorized reproduction, adaptation, translation, publication, distribution or dissemination of a whole or any part of this catalogue, without the written consent of AEL Mining Services Limited will constitute an act of copyright infringement. AEL Mining Services Limited reserves its rights to take civil and/or criminal action against such infringement. AEL Mining Services Limited disclaims all warranties and liabilities for the use of this catalogue and the information contained herein, and assumes no responsibility for any errors that may appear in this document. AEL Mining Services Limited makes no commitment to update the information contained here, and may make changes at any time without notice. Other product and corporate names may be trademarks or registered trademarks of other companies, and are used only for explanation and to the owners benefit, without intent to infringe.
INDEX
Contents
Corporate Information
Introduction About AEL Mining Services Glossary of Abbreviations Lead-times AEL Sales Offices
1
2 3 4 4 4
45
45 46 47
48
48 49 50 51 52 53
Explosives
Surface Bulk Emulsions
SB100 Eco Series (Mixed with ANA & sensitised) SB100 Eco Series (Sensitised using ANFO) SB100 Series (Mixed with ANA & sensitised) SB100 Series (Sensitised using ANFO) SP200 Eco Series (Mixed with ANA & sensitised) SP200 Eco Series (Sensitised using ANFO) SC200 Eco Series (Mixed with ANA & sensitised) SC200 Eco Series (Sensitised using ANFO) SH200 Eco Series (Mixed with ANA & sensitised) SH200 Eco Series (Sensitised using ANFO) SB300 Series (Mixed with ANA & sensitised) SB300 Series (Sensitised using ANFO) SB300 Eco Series (Mixed with ANA & sensitised) SB300 Eco Series (Sensitised using ANFO) Compatibility Matrix Surface Bulk Products
5
6
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Electric Initiators
Statsafe Detonator Instantaneous Electric Detonator (IED) Fusehead Assembly Shurstart Shock Tube Starter
54
54 55 56 57 58
Electronic Initiators
NetShock NetStart
59
59 60
61
61 62 63 64 65
21
21 22 23
Blast Current Indicator (BCI) AEL Detonating Cords AEL Pentolite Primers AEL Detonating Relays Compatibility Matrix
Packaged Explosives
Magnum Watergel explosives Magnum Buster (Zambia only) Anfex
24
24 25 26
Blasting Accessories
Mantis Hot Hole Monitor
67
68 69
Specialised Explosives
Barrel Blasting Gunpowder Compatibility Matrix Packaged & Specialised
27
27 28 29
Industrial Products
Ammonium Nitrate Anfo Grade (ANA) Ammonium Nitrate Emulsion Grade (ANE) Ammonium Nitrate Solution (ANS) Nitric Acid Aqueous Ammonia Ammonia 100-I, Ammonia 100-R
70
72 73 74 75 76 77
31
31
32
32 33
Services
AEL Mining Optimisation Product Services
79
80 81
Initiating Systems
Shock Tube
Uni-Delay LP Splitter Multi SPD Multi LPD Uni-Delay SP Trunkline Cluster Lead-In Extender
AEL Mining Services Limited Product Catalogue, 2011
35
36
36 37 38 39 40 41 42 43 44
Equipment Services
Mobile Manufacturing Units (MMU) Mobile Charging Units Portable Charging Units (PCU) Emulsion Plant 10T, 20T Product New Name Guide
83
84 85 86 87 88
About AEL
Introduction
Introduction - AEL's product range and beyond
AEL Mining Services is proud to publish our product catalogue showcasing our product offering. This is in line with positioning the group as an added value service provider. At AEL, we always aim to go beyond the product offering to bring you a comprehensive range of services to produce optimum mining productivity. Enhanced customer focus drives us to bring you cutting edge technology and innovations from our R&D team, which play a crucial role in the development of all our products. Hence you will notice the adjustment of product categories and names. This is in line with our strategy to adopt the AEL name as our master brand, with a product or service descriptor designating a category, and likewise, a descriptor designating a specific product or service. So you will find that some of the brand names that you are accustomed to are rebranded with AEL's name, product or service descriptor and an alpha-numeric code as the specific product. The rebranding of our products has rationalised our product range to ensure that only the best and latest offerings are included. New names are given prominence and old names will appear in smalls after the new names in this edition. Alongside the formulation of our products, the new AEL Product Catalogue has been put together with meticulous care, and we hope that it is an invaluable reference tool for you. With safety at the forefront of our product design focus, on behalf of the AEL management team, I would like to wish you a safe and productive mining environment. Tobie Louw Managing Director
About AEL
Wealth Unearthed
AEL Mining Services Limited Product Catalogue, 2011
About AEL
Glossary of Abbreviations
AN ANFO CN FO VIXEN-I IED SPD LPD PETN RBEE REE TNT A ac ADC dc RWS RBS Kg g g/cm kg/m g/m kPa mm ms m/s mJ/ohm MJ NEQ s s/m t VOD > > < < = m/m Gpa ~ pF kV ammonium nitrate ammonium nitrate fuel-oil calcium nitrate fuel-oil the AEL international detonating code instantaneous electric detonator short period delay long period delay pentaerythritol tetranitrate relative bulk effective energy relative effective energy trinitrotoluene ampere alternating current Ardeer Double Cartridge (test) direct current Relative Weight Strength Relative Bulk Strength kilogram gram gram per cubic centimetre kilogram per metre grams per metre kilopascal millimeter millisecond metres per second millijoule per ohm Megajoule Net Explosives Quantity second seconds per metre tonne (metric) velocity of detonation more greater than or equal to less than less than or equal to equals mass to mass gigapascal approximate pico FARAD kilo Volts
36 hours 14 days
(The lead-time for shafthead deliveries does not include weekends or public holidays)
5 days 20 days
(The lead-time for the above three categories does not include the day of order, the day of dispatch or delivery time or any weekends or public holidays)
Made-to-order Products and Exports The lead-time for the above two categories is given based on orders that could be large, and the overall demand pattern that has been experienced by AELs production facilities. The lead-time for each order is open to negotiation depending on the size of any particular order and the overall demand pattern on the plant at any specific point in time. AEL will endeavor to negotiate in good faith to meet customer requirements but always reserve the right to evoke the lead-time requirements as stated above.
Explosives
Wealth Unearthed
AEL provides a range of explosives in both underground and surface mining. AEL is one of the few key manufacturers of a range of specially formulated products that can be effectively placed in vertical up-holes and downholes.
AEL's Surface Bulk Explosives are one of the best researched and developed formulations currently in the market. The Eco range of products have been developed to optimise surface mining blasting, this coupled with the use of recycled oil in the formulation has provided an environmentally friendly range of products that attain higher shock energy, hence providing a unique offering. With a solution to suit almost every application environment including surface, underground operations and quarries AEL's highly skilled team, its vast range of products and solutions, equipment and technical resources have made the company an acknowledged leader in this field, both in South Africa, African regions and internationally. One of the company's ongoing success stories is its Underground Bulk Systems, which, while widely accepted as the industry standard for underground mining, is continuously evolving within the walls of AEL's Research & Development department. New and improved emulsion formulations, pumping systems and value-add services targeted to this industry are constantly being realised as AEL continues in its efforts to improve its offering. The Underground Bulk System technology and AEL's initiating systems combine to optimise safety while improving blasting efficiencies in a variety of mining, tunnelling and shaft sinking applications. Even under the most trying blasting conditions, AEL's proven technologies deliver tangible benefits to its customers across the entire mining operation. Most notably, through the application of innovative technology combined with years of experience in this market, AEL has introduced its sticky solution, which offers customers a competitive edge in cost effective blasting and is set to change the blasting landscape as we know it today. Offering customers the ability to place explosives vertically up-hole has changed the way customers view difficult blasting environments and simplified the process substantially. Through its strategically placed network of regional depots, AEL is able to provide a full range of explosives and services to the most remote customers in African and international markets. This includes a wide range of specifically formulated water gels, emulsions, dry gels and ANFEX solutions. As with all AEL products, these solutions are supported by a reliable range of initiation systems and blasting services, as well as skilled technical support staff who are on hand to manage customer needs.
EXPLOSIVES
Surface Bulk Emulsions - SB100 Eco Series (Mixed with ANA and Sensitised)
Sb100 Eco is an AN only base emulsion matrix. It is environmentally friendly as waste or recycled oil is used in the oil phase. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged in blast holes when sensitised (S100 Eco) or blended with ANA and sensitised or with Anfo mixed to various ratios. It is used in surface mining blasting. Its water resistance is ecxellent depending on emulsion /Anfo ratio. Once blended and/or sensitised, the S100 Eco product range has a Velocity of Detonation (VOD) between 4,500 & 6000m/s.
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SB100 Eco series are dark grey or black emulsion blend products.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 10 days Dark grey/black 4 500-6000m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3 m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised 6
EXPLOSIVES
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SB100 Eco series are a dark grey or black emulsion blend product.
Sensitised Using Anfo - This is sensitised SB100 Eco and is offered in the range and indicated in the table below.
Property SB154Eco SB157Eco SB160Eco SB164Eco SB174Eco Minimum hole 250 200 150 150 150 diameter (mm) Water resistance Variable Variable Variable Variable Variable Typical in-hole 1.35 1.3 1.25 1.2 1.05 density (g/cm) Sensitiser Anfo Anfo Anfo Anfo Anfo Recm. Hole 60 60 60 60 60 depths* (g/cm) Primer* Booster Booster Booster Booster Booster 100MPa RWS (%ANFO) 125 122 119 117 110 100Mpa RBS (%ANFO) 120 198 186 176 144 20MPa RWS (%ANFO) 107 106 105 105 102 20Mpa RBS (%ANFO) 180 172 164 157 134 Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 10 days Dark grey/black 4 500-6000m/s Variable 150gm Booster
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
AEL Mining Services Limited Product Catalogue, 2011
EXPLOSIVES
Surface Bulk Emulsions - SB100 Series (Mixed with ANA and Sensitised)
Sb100 is an AN only base emulsion matrix. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged into blast holes when sensitised (S100) or blended with ANA and sensitised or with Anfo mixed to various ratios (S100 Series) as outlined in the table below. It is used in surface mining blasting. Its' water resistance is excellent depending on emulsion /Anfo ratio. Once blended and/or sensitised, the S100 product range has a Velocity of Detonation (VOD) between 4,500 & 6000 m/s.
Mining Method
Surface Opencast Open Pit Quarrying
Application
Technical Specifications
Appearance
SB100 series are a honey coloured blend products.
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 10 days Honey coloured 4 500-6000m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
EXPLOSIVES
It is used in surface mining blasting. Its' water resistance is variable depending on emulsion/Anfo ratio. Once blended and/or sensitised, the S100 Eco product range has a Velocity of Detonation (VOD) between 4,500 & 6000 m/s.
Mining Method
Surface Opencast Open Pit Quarrying
Application
Technical Specifications
Appearance
SB100 series are a honey coloured emulsion blend products.
Sensitised Using Anfo - This is sensitised SB100 and is offered in the range indicated in the table below
Property SB154Eco SB157Eco SB160Eco SB164Eco SB174Eco Minimum hole 250 200 150 150 150 diameter (mm) Water resistance Variable Variable Variable Variable Variable Typical in-hole 1.35 1.3 1.25 1.2 1.05 density (g/cm) Sensitiser Anfo Anfo Anfo Anfo Anfo Recm. Hole 60 60 60 60 60 depths* (g/cm) Primer* Booster Booster Booster Booster Booster 100MPa RWS (%ANFO) 125 122 119 117 110 100Mpa RBS (%ANFO) 120 198 186 176 144 20MPa RWS (%ANFO) 107 106 105 105 102 20Mpa RBS (%ANFO) 180 172 164 157 134 Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 10 days Honey coloured 4 500-6000m/s Variable 150gm Booster
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
AEL Mining Services Limited Product Catalogue, 2011
EXPLOSIVES
Surface Bulk Emulsions - SP200 Eco Series (Mixed with ANA and Sensitised)
SP200 Eco is an AN and CN based emulsion matrix specially formulated for hard rock blasting. It is environmentally friendly as waste or recycled fuel is used in the oil phase. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged in blast holes when sensitised (SP200 Eco) or blended with ANA and sensitised or with Anfo mixed to various ratios (SP200 Eco Series) as outlined in the table below. It is used in surface mining blasting. Its' water resistance is excellent depending on emulsion/ANA ratio. Once blended and/or sensitised, the SP200 Eco product range has a Velocity of Detonation (VOD) of between 4 500 m/s and 6 000 m/s.
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SP200 Eco products are a dark grey or black emulsion blend product.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 3 weeks Dark grey / black 4500m/s - 6000m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised 10
EXPLOSIVES
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SP200 Eco products are a dark grey or black emulsion blend product.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 3 weeks Dark grey / black 4500m/s - 6000m/s Variable 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
AEL Mining Services Limited Product Catalogue, 2011
EXPLOSIVES
Surface Bulk Emulsions - SC200 Eco Series (Mixed with ANA and Sensitised)
SC200 Eco is an AN and CN based emulsion matrix specially formulated to maximising the recycled oil content - It is environmentally friendly as the waste or recycled fuel is used in the oil phase. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged in blast holes when sensitised (SC200 Eco) or blended with ANA and sensitised or with Anfo mixed to various ratios (SC200 Eco Series) as outlined in the table below. It is used in surface mining blasting. Its' water resistance is excellent depending on emulsion/ANA ratio. Once blended and/or sensitised, the SC200 Eco product range has a Velocity of Detonation (VOD) of between 4,200 m/s and 5 700 m/s.
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SC200 Eco products are a dark grey or black emulsion blend product.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 3 weeks Dark grey / black 4200m/s - 5700m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised 12
EXPLOSIVES
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SC200 Eco products are a dark grey or black emulsion blend product.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator 3 weeks Dark grey / black 4200m/s - 5700m/s Variable 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
AEL Mining Services Limited Product Catalogue, 2011
EXPLOSIVES
Surface Bulk Emulsions - SH200 Eco Series (Mixed with ANA and Sensitised)
SH200 Eco is an AN, CN and Urea based product specially formulated for blasting in area with Hot Bore Holes. It is environmentally friendly as waste or recycled fuel is used in the oil phase. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged in blast holes when sensitised (SH200 Eco) or blended with ANA and sensitised or with Anfo mixed to various ratios (SH200 Eco Series) as outlined in the table below. It is used in surface mining blasting. Its' water resistance is excellent depending on emulsion/ANA ratio. Once blended and/or sensitised, the SH200 Eco product range has a Velocity of Detonation (VOD) of between 4,000 m/s and 5 500 m/s.
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SH200 Eco products are a dark grey or black emulsion blend product.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator Not recommended (safety) Dark grey / black 4000m/s - 5500m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised 14
EXPLOSIVES
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SH200 Eco products are a dark grey or black emulsion blend product.
Application
Open Pit Quarrying
Technical Properties
Sleep Time Colour Velocity of Detonation Water resistance Minimum initiator Not recommended (safety) Dark grey / black 4000m/s - 5500m/s Variable 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
AEL Mining Services Limited Product Catalogue, 2011
EXPLOSIVES
Surface Bulk Emulsions - SB300 Series (Mixed with ANA and Sensitised)
SB 300 is an AN and Urea formulation base emulsion matrix. It is recommended for use in reactive grounds mostly in coal mining. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged in blast holes when sensitised (S300) or blended with ANA and sensitised or with Anfo mixed to various ratios (S300 Series) as outlined in the table below. It is used in surface mining blasting. Its' water resistance is excellent depending on emulsion/ANA ratio. Once blended and/or Mining Method sensitised, the S300 product range has a Surface Velocity of Detonation (VOD) between 4,500 & Opencast 5,500 m/s.
Open Pit Quarrying Open Pit
Application
Technical Specifications
Appearance
SB300 series are a honey coloured emulsion blend products.
Technical Properties
Sleep Time Velocity of Detonation Water resistance Minimum initiator Not recommended 4 500-5 500m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3 m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
16
EXPLOSIVES
Application
Technical Specifications
Appearance S300 Product Series
S357 Eco 200 Variable 1.28 Anfo 45 Booster 120 192 105 168 S360 Eco 150 Variable 1.25 Anfo 50 Booster 121 194 106 169 S364 Eco S374 Eco 150 150 Variable 1.20 Anfo 50 Booster 123 196 107 172 Variable 1.05 Anfo 50 Booster 126 202 111 177
SB300 series are a honey coloured emulsion blend product. Sensitised Using Anfo
Property S354 Eco Minimum hole 250 diameter (mm) Water resistance Variable Typical in-hole 1.28 density (g/cm) Sensitiser Anfo Recm. Hole 45 depth* (m) Primer* Booster 100MPa RWS 119 (%ANFO) 100Mpa RBS 190 (%ANFO) 20MPa RWS 104 (%ANFO) 20Mpa RBS 166 (%ANFO)
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
Technical Properties
Sleep Time Velocity of Detonation Water resistance Minimum initiator Not recommended 4 500-5 500m/s Variable 150gm Booster
17
EXPLOSIVES
Surface Bulk Emulsions - SB300 Eco Series (Mixed with ANA and sensitised)
SB300 Eco is an AN and Urea formulation base emulsion matrix. It is recommended for use in reactive ground mostly in coal mining. It is handled and transported as an unsensitized product to mines and/or operational sites. The product is charged into blast holes when sensitised (S300 Eco) or blended with ANA and sensitised as outlined in the table below. It is used in surface mining blasting.
Mining Method
Its' water resistance is exellent depending on emulsion/Anfo ratio. Once blended and/or sensitised, the S300 Eco product range has a Velocity of Detonation (VOD) ranges from 4,500m/s to 6,000m/s
Surface Opencast Open Pit Quarrying
Application
Open Pit
Technical Specifications
Appearance
SB300 Eco products are a dark grey or black emulsion blend product.
Technical Properties
Sleep Time Velocity of Detonation Water resistance Minimum initiator Not recommended (safety) 4500m/s - 6000m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
EXPLOSIVES
Mining Method
Surface Opencast Open Pit Quarrying
Technical Specifications
Appearance
SB300 Eco products are dark grey or black emulsion blend product.
Application
Open Pit
Technical Properties
Sleep Time Velocity of Detonation Water resistance Minimum initiator Not recommended (safety) 4500m/s - 6000m/s Excellent 150gm Booster
Notes: 1.In-hole densities of emulsions vary with depths. Please contact your regional sales office for assistance in finding the best product fit for your application. 2.The Relative Weight & Bulk Strengths are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code. 3.The availability of the above offering is subject to MMU configuration. 4.In large diameter, typically 250 mm and above, a maximum of 3m of water may be allowed. 5.The Relative Bulk Strengths and Effective Energies are relative to ANFO (=100) at a density of 0,80 g/cm3. The figures have been determined using the VIXEN-i detonation code.
Special precautions
Once sensitised base emulsion becomes an explosive Storage not recommended once sensitised
AEL Mining Services Limited Product Catalogue, 2011
EXPLOSIVES
<100
>200
<100
>200
<100
DONORS 60g Booster 150g Booster 400g Booster 175g Booster - Smart 400g Booster - Smart
20
>200
Diameter (mm)
EXPLOSIVES
Mining Method
Underground Narrow Reef Massive
Application
Technical Specifications
Appearance
The base emulsion is a honey coloured mixture of two immiscible liquids and an emulsifier. The sensitiser is an aqueous or emulsion product, which, when added to the base emulsion and mixed, creates an explosive in the blast-hole.
Product Range
UG 100 Development and stoping Base emulsion - honey Sensitised emulsion - green 2.443 UG 100 S Up-holes/ring blasting and development Base emulsion - honey Sensitised emulsion - blue 2.232 79 112 8D in a 45mm diameter hole 35C, 22000-26000cP 5250m/s in a 89mm diameter hole Boosters are used in upholes Generally priming is required
Application Colour
Technical Properties
Sleep Time Water resistance Density Gap Sensitivity Repumpability 7 days maximum Excellent Base Emulsion: 1.41-1.47g/cc Sensitised Emulsion: 1.0-1.15g/cc 0 Six Stages
Ideal Delivered Energy (IDE) MJ/kg* 86 Relative Effective Energy (REE)* 123 Relative Bulk Strength (RBS)* Minimum Initiator 8D in length, 25mm diameter 35C, 22000-26000cP Viscosity 4800m/s in 32mm diameter VOD hole Priming is not required in Best Practices conventional stoping with holes less than 1.5m in length. For all other applications results will be site specific but a primer/ booster is recommended. The product can be used in short up-holes where the diameter is less than 50mm Special Precautions Reverse priming should not be conducted Base emulsion and sensitiser should be stored seperately Use GS15 (Green) aqueous or GE50 (Green) emulsified sensitiser Sensitised emulsion should be well mixed and within correct density range Bulk delivery in tankers or Delivery bagged product Bagged Emulsion 2 x 12.5kg bags in a 25kg bag, 40 bags per ton 2 x 16.8kg cases of GE50 Sensitising Agent (Green) emulsified sensitiser per ton of base emulsion OR 35kg of GS15 (Green) aqueous sensitiser per ton of base emulsion
A lance attachment is required for all up- hole charging Base emulsion and sensitiser should be stored separately Use GS30 (Blue) aqueous sensitiser Sensitised emulsion should be well mixed and within correct density range Bulk delivery in tankers N/A 35kg of GS30 (Blue) aqueous sensitiser per ton of base emulsion
*Any product with a suffix 'C' means that the formulation is pertinent to a specific site *If any product has the suffix 'Bagged' then product is delivered in bags *As calculated by Vixen-i
21
EXPLOSIVES
Mining Method
Underground Narrow Reef Massive
Application
Tunnelling Stoping Massive Ring Blasting Underground Coal
Technical Specifications
Appearance
The base emulsion is a honey coloured mixture of two immiscible liquids and an emulsifier. The sensitiser is an aqueous product, which, when added to the base emulsion and mixed, creates an explosive in the blast-hole.
Product Range
Application Colour Ideal Delivered Energy (IDE) MJ/kg* Relative Effective Energy (REE)* Relative Bulk Strength (RBS)* Viscosity Best Practices
UG 200 S Up-holes/ring blasting and development Base emulsion - honey Base emulsion - honey Sensitised emulsion - pink Sensitised emulsion - blue 2.309 1.97
81 102-117 35C, 15000-20000cP Priming is required. The product can be used in short up-holes where the diameter is less than 50mm Reverse priming should not be conducted Base emulsion and sensitizer should be stored seperately Use GS15 (Pink) sensitiser Sensitised emulsion should be well mixed and within correct density range
69 87-100 35C, 17000 22000cP Boosters are used in upholes Generally priming is required A lance attachment is required for all up-hole charging Base emulsion and sensitiser should be stored separately Use GS30 (blue) sensitiser Sensitised emulsion should be well mixed and within correct density range
Special Precautions
Technical Properties
Sleep Time Velocity of Detonation Water resistance Density Gap Sensitivity Minimum Initiator Repumpability 7 days maximum >4 000m/s Excellent Base Emulsion: 1.41-1.47g/cc Sensitised Emulsion: 1.0-1.15g/cc 0 8D Six Stages
*Any product with a suffix 'C' means that the formulation is pertinent to a specific site *If any product has the suffix 'Bagged' then product is delivered in bags *As calculated by Vixen-i
Packaging
Bulk delivery in tankers of base emulsion and sensitiser
22
EXPLOSIVES
UG100
UG100S
UG200
UG200S
UG100C
UG200C*
23
EXPLOSIVES
Product Range
AEL offers cartridges from 25mm to 110mm in diameter and stock the following diameters and lengths as standard:
~3400 m/s Excellent 1.18-1.25 1.13-1.20 Touch 6D or 8g/m det cord
Diameters: 25mm, 28mm, 32mm, 38mm, 50mm & 65mm. Lengths: 200mm, 300mm & 600mm.
Explosives name Magnum Buster Gel Magnum 365 Gel Magnum Control Magnum Frag Magnum Plus
Packaging
25 Kg cardboard boxes with a base and lid.
*Energies are calculated using the VIXEN-i code and is measured to 20MPa
24
EXPLOSIVES
Technical Specifications
Appearance
The product is packaged in printed sausage-shaped cartridges with a firm, putty-like consistency. The explosive appears white in colour.
Special precautions
Always handle with care Keep detonators stored away from explosives Store in a specially licensed, cool and dry area for a maximum of 12 months from the date of manufacture Although emulsions do not readily burn, keep away from flames, sparks and other sources of ignition
Product Shelf Life Legal Storage* Expiry Date (from date of manufacture)
Technical Properties
Velocity of Detonation Water resistance Cartridge Density Gap Sensitivity Minimum Initiator >5 000m/s Excellent 1.18 nominal 40mm 6D or 8g/m detcord
Packaging
Description Gross Weight (kg) NEQ (kg) Case 26 25
25
EXPLOSIVES
Mining Method
Underground Narrow Reef Massive Surface Openpit Opencast Quarrying Construction
Application
Tunnelling Stoping Massive (uphole) Ring Blasting Trenching Openpit Quarrying Civils
Technical Specifications
Appearance
The product is packaged in a 25kg plastic bag, which contains four 6.25kg multibags. The prills are white to off-white in colour and may appear grey if recycled oil is used for fueling.
Special precautions
Do not use in wet mining conditions as Anfex is water soluble Do not use with detonating cord
Product Shelf Life Legal Storage* Expiry Date (from date of manufacture)
Packaging
Description Gross Weight (kg) NEQ (kg) Units per bag Bag 25 25 four multi bags weighing 6.25kg
Technical Properties
AEL Anfex does not contain any micro spheres which may be harmful if inhaled during pneumatic loading operations.
26
EXPLOSIVES
Mining Method
Underground Narrow Reef
Application
Tunnelling
Technical Specifications
Appearance
The product is packaged in thin plastic tubes that are white to beige in colour and can easily be clipped together.
Special precautions
Although watergels are of the safest explosives manufactured, always handle with care Keep detonators stored away from explosives Store in a specially licensed, cool and dry area for a maximum of 18 months from the date of manufacture Although watergels do not readily burn, keep away from flames, sparks and other sources of ignition
Product Shelf Life Legal Storage* Expiry Date (from date of manufacture)
Technical Properties
Velocity of Detonation Dimensions Water resistance Cartridge Density Gap Sensitivity Minimum Initiator RWS RBS 3 500 m/s 18 x 595mm Excellent 1.2 Nominal Touch 6D 99 142
Packaging
Description Dimensions (LxBxH) Gross Weight (kg) NEQ (kg) Units per case Case 225x225x620 25 18 170
27
EXPLOSIVES
Mining Method
Surface Quarrying
Application
Quarrying
Technical Specifications
Appearance
A low explosive black or dark grey, granular, free-flowing mixture of potassium nitrate, sulphur and charcoal.
Special precautions
Blasting gunpowder is highly sensitive to impact, friction, flame, spark and static discharge Blasting gunpowder ignites when ground Keep away from all sources of ignition, direct sunlight or strong incandescent light Contamination with grit increases sensitivity to impact or friction Temperatures >130 will lead to decomposition
Product Shelf Life Legal Storage* Expiry Date (from date of manufacture)
Safety Handling
Gunpowder is highly sensitive to spark, flame and friction and must be handled with extreme care
Packaging
Description Dimensions (LxBxH) Gross Weight (kg) NEQ (kg) Units per case/bag Case 562x245x245mm 27 25 10 x 2.5kg
28
EXPLOSIVES
Magnum Buster (Zambia Only) Magnum Control Magnum Frag Magnum Plus Magnum Buster Gel Magnum 365 Gel Anfex Barrel Shock Tube Uni-Delay LP Shock Tube Multi LPD Shock Tube Multi SPD Shock Tube Profiler Capped Fuse Systems - Stopefuse Capped Fuse Systems - Durafuse Electronic Delay Detonators - QuickShot Electronic Delay Detonators - Smartdet Electronic Delay Detonators - SmartShot Electronic Delay Detonators - DigiShot Electronic Delay Detonators - HotShot Electric Initiators - Statsafe Detonators Instantaneous Electric Detonator (IED) Electric Initiators - Fusehead Assembly Electric Initiators - Shurstart Powercord 8 Powercord 10 Pentolite Primers
Barrel
EXPLOSIVES
Notes
30
EXPLOSIVES
Mining Method
Surface Open Cast Open Pit Quarrying Construction
Application
Open Pit Quarrying
Technical Specifications
Appearance
Bulk Anfex comprises prills that are white or off-white in colour.
Technical Properties
Sleep time Velocity of Detonation Water resistance Minimum Initiator Not recommended 3 500 m/s Poor 150g booster
Special precautions
Do not use in wet holes
31
EXPLOSIVES
Mining Method
Surface Opencast Openpit Quarrying Construction
Application
Open Pit Quarrying
Technical Specifications
Appearance
Bulk Anfex Eco comprises prills that are grey in colour.
Technical Properties
Sleep Time Velocity of Detonation Water resistance Minimum Initiator Not recommended 3 500 m/s Poor 150g Booster
Special precautions
Do not use in wet holes
32
EXPLOSIVES
Donors 60g Pentolite Primer 150g Pentolite Primer 400g Pentolite Primer 175g Pentolite Primer Smart 400g Pentolite Primer Smart
33
EXPLOSIVES
Notes
34
Initiating Systems
Wealth Unearthed
As a holistic provider of a comprehensive range of commercial explosives and solutions, AEL is proud of its locally developed and manufactured range of initiating systems suitable for all mining applications.
With a long history and proven track record in the market, AEL is in a unique position to offer a range of products and solutions, on demand, to suit a vast variety of applications and market requirements in the underground and surface mining fields. Its initiating systems and components are highly flexible, designed with the user in mind and are available as Standard and Made-To-Order products. Reinforcing its position as a solution provider and leader in this field, AEL is fully equipped to offer technical support and services in South Africa, other African regions as well as internationally. What differentiates AELs offering is the fact that the entire range is conceptualised, designed, manufactured, delivered, supported and maintained by the organisations various specialised divisions. This means AEL is in a unique position in that it provides both solid, reliable initiating systems, as well as all the services around the products to offer customers complete peace of mind. AEL offers its customers in the mining and construction industry a full range of initiating products including electronic detonators, capped fuses, igniter and detonating cords, as well as a comprehensive range of boosters and starters - all of which fully compliment the companys entire range of explosive solutions. AELs capped fuse technology and electronic detonators are considered to be leading technologies in the market place. The company has demonstrated its internal Research & Development teams prowess with the ongoing development of new shock tube technologies, which have been well received in the market place. AELs electronic detonator range is highly flexible and offers solutions to applications of varying sophistication.
INITIATING SYSTEMS
A Uni-delay LP (long period) is a non-electric initiation system which is designed for use in underground mines. The unit consists of both an out-hole and an in-hole delay detonator.
Mining Method
Underground Narrow Reef
Application
Tunnelling Stoping
Technical Specifications
Appearance
A length of shock tubing, which incorporates a 4000ms delay in-hole detonator that is crimped onto one end and a 200ms short delay out-hole detonator crimped onto the other end. Both detonators include either a rubber plug or sleeve. The out-hole detonator is located in a plastic connector body. There are two variants available, the Uni-Delay LP (6) or (3) which hold a maximum of six or three lengths of shock tube respectively, the later is ideally suited to narrow reef mining conditions.
Technical Properties
Detonator strength Sleep Time Core load of tubing VOD of tubing 8 strength 48 hours ~ 15mg/m ~ 2000m/s Outside diameter of tubing ~ 3mm Water resistance Excellent
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Severe impact on the detonator or tubing can result in accidental initiation and explosion
Packaging
Description Dimensions (LxBxH) Gross weight
Length (m) 2 2.5 3 3.5 4 4.5 5 6 7
Product Range
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine Subject to quality confirmation
36
INITIATING SYSTEMS
A Splitter is a non-electric initiation system which is designed for splitting the blast timing in multiple directions, in underground mines. The unit consists of two out-hole delay detonators.
Mining Method
Underground Narrow Reef
Application
Tunnelling Stoping
Technical Specifications
Appearance
A length of shock tubing, which incorporates an out-hole delay detonator crimped onto each end. Both detonators include either a rubber plug or rubber sleeve. Both detonators are located in a plastic connector body. The plastic body is colour-coded according to the delay of the out-hole detonators.
Technical Properties
Detonator strength Core load of tubing VOD of tubing 2 strength equivalent ~ 15mg/m ~ 2000m/s Outside diameter of tubing ~ 3mm Water resistance Excellent
Features Uni-delay timing system: 100ms or 200ms Colour- coded connector blocks indicate delay number Green coloured shock tubing 18kg minimum break load Immune to hazards of radio frequency radiation, stray currents and static discharge
Packaging
Description Dimensions (LxBxH) Gross weight (kg)
Length (m) 1 1.5 2
Product Range
Connector block Nominal delay periods (ms) Brown 100/100ms White 200/200ms
37
INITIATING SYSTEMS
A Multi SPD (short period delay) is a non-electric initiation system which is designed for use in underground and surface mines. The unit consists of an in-hole delay detonator.
Application
Tunnelling Stoping Ring Blasting Trenching Open Pit Quarrying Technical Properties Civils Detonator strength 8 strength Sleep Time 2 weeks (in-hole) Core load of tubing ~ 15mg/m VOD of tubing ~ 2000m/s Outside diameter of tubing ~ 3mm Water resistance Excellent
Technical Specifications
Appearance
A length of yellow shock tubing, which includes a short period delay in-hole detonator. The detonator includes either a rubber plug or sleeve that is crimped on one end. The detonator delay period is printed along the length of the detonator shell. The free end of the shock tube is sealed and incorporates a colour-coded connector clip, which indicates the delay period. A tag behind connector the clip indicates the length of tubing, as well as the delay time.
Product Range
Nominal delay (ms)
Colour code
Nominal delay (ms)
Colour code
Nominal delay (ms)
Colour code
Nominal delay (ms)
Colour code
Nominal delay (ms)
Colour code
0 25 50 75 100 125 Turquiose Orange White Red Brown Light Green 150 175 200 225 250 275 Light blue Beige Clear Grey Dark Pink Amber 300 325 350 375 400 425 Fern green Peach Pearl Violet Curry Pink Gold 450 475 500 600 800 700 Silver Maroon Light pink Dark blue Powder blue Lime green 900 1000 1250 1500 Lavender Light brown Light grey Burnt orange
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Case 565 x 295 x 270mm 25
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Severe impact on the detonator or tubing can result in accidental initiation and explosion
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine Subject to quality confirmation
38
INITIATING SYSTEMS
A Multi LPD (long period delay) is a non-electric initiation system which is designed for use in underground and surface mines. The unit consists of an in-hole long period delay detonator.
Mining Method
Underground Narrow Reef Massive Surface Construction
Application
Tunnelling Stoping Trenching
Technical Specifications
Appearance
A length of green shock tubing, which incorporates a long period delay in-hole detonator. The detonator includes either a rubber plug or sleeve that is crimped on one end. The detonator delay period is printed along the length of the shell. The free end of the shock tube is sealed and incorporates a colour coded connector clip indicating the delay period. A tag behind the connector clip indicates the length of tubing, as well as the delay period.
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Product Range
Nominal delay (ms)
Colour code
0 100 200 300 400 500 Turquiose Brown Clear Curry Pearl Violet Light pink Nominal delay (ms) 600 700 800 1000 1250 1500 Colour code Dark blue Powder blue Lime green Light brown Light grey Burnt orange Nominal delay (ms) 1750 2000 2500 3000 3500 4000 Rose quartz Emerald Aqua Marine Coral Colour code Sapphire Agate Nominal delay (ms) 5000 6000 7000 8000 9000 Tanzanite Colour code Amethyst Stone Ruby Jade
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Case 565 x 295 x 270mm 22
Technical Properties
Detonator strength Sleep Time Colour Core load of tubing VOD of tubing Outside diameter of tubing Water resistance 8 strength 2 weeks (in-hole) Green tubing ~ 15mg/m ~ 2000m/s ~ 3mm Excellent
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Severe impact on the detonator or tubing can result in accidental initiation and explosion
AEL Mining Services Limited Product Catalogue, 2011
39
INITIATING SYSTEMS
A Uni-Delay SP (short period) variant is a non-electric initiation system which is designed for use in underground and surface mines. The unit consists of an in-hole and an out-hole delay, each with a selection of delay times.
Application
Stoping Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A length of yellow shock tubing, which incorporates an in-hole detonator crimped onto one end and a short delay out-hole detonator crimped onto the other end. Both detonators incorporate either a rubber plug or sleeve. The out-hole detonator is located in a plastic connector body, which is colour-coded according to the delay of the out-hole detonator. The out-hole delay detonator time and shock tube length is printed on a label attached to the shock tube. The in-hole detonator delay period is printed along the length of the detonator shell.
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Moderate temperatures and dry conditions in a well ventilated, approved magazine 18 months 6 months in customer magazine 12 months
Product Range
Surface Delay
Nominal delay (ms) Colour code Nominal delay (ms) Colour code Nominal delay (ms) Colour code 17 Blue 75 Red 175 Beige 25 Orange 100 Brown 200 Clear 33 Dark green 125 Light green 225 Grey 42 Yellow 150 Light blue 250 Dark pink
In-Hole Delay
Nominal delay (ms) 350 450 475 500
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Case 565 x 295 x 270mm 22
Technical Properties
8 strength in-hole 2 strength equivalent out-hole Sleep Time 2 weeks (in-hole) Core load of tubing ~ 15mg/m VOD of tubing ~ 2000m/s Outside diameter of tubing ~ 3mm Water resistance Excellent Detonator strength
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Severe impact on the detonator or tubing can result in accidental initiation and explosion Do not attempt to initiate detonating cord using the out-hole detonator and connector clip
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine Subject to quality confirmation
40
INITIATING SYSTEMS
A Trunkline is a non-electric initiation system which is designed for use in underground and surface mines. The unit consists of an out-hole detonator.
Application
Tunnelling Stoping Massive (uphole) Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A length of green shock tubing, which includes a short period delay detonator and a rubber sleeve that has been crimped on one end. The free end of the shock tube is sealed and incorporates a colour-coded connector clip which indicates the delay period. The out-hole detonator is located in a plastic six tube connector block, which is colour-coded according to the delay of the detonator. The delay period and shock tube length is printed on a label attached to the shock tube.
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Product Range
0 Nominal delay (ms) Turquiose Colour code 42 Nominal delay (ms) Yellow Colour code Nominal delay (ms) 150 Colour code Light blue Nominal delay (ms) 250 Colour code Dark pink 17 Blue 75 Red 175 Beige 25 Orange 100 Brown 200 Clear 33 Dark green 125 Light green 225 Grey
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Case 565 x 295 x 270mm 22
Length (m) 8 9 10 12 15 30 Units per NEQ (kg) case 150 0.1 140 0.1 120 0.1 100 0.1 75 0.1 50 0.1
Technical Properties
Detonator strength Colour Core load of tubing VOD of tubing Outside diameter of tubing Water resistance 2 strength equivalent Green tubing ~ 15mg/m ~ 2000m/s ~ 3mm OD Excellent
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Severe impact on the detonator or tubing can result in accidental initiation and explosion Do not attempt to initiate detonating cord with this product
AEL Mining Services Limited Product Catalogue, 2011
41
INITIATING SYSTEMS
A Cluster is a non-electric initiation system which is designed for use in surface mines. The unit consists of a trunk line delay detonator housed in a cluster connector block.
Mining Method
Surface Opencast Open Pit Quarrying Construction
Application
Technical Specifications
Appearance
A length of green shock tubing that incorporates a short period delay detonator. The detonator includes sleeve that has been crimped on one end with a given length of shock tubing. The free end of the shock tube is sealed and incorporates a colour coded connector clip. The delay period is also printed along the length of the detonator. The detonator is fitted into a colour-coded cluster connector block. The delay period and shock tube length is printed on a label attached to the shock tube.
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Product Range
0 Nominal delay (ms) Turquiose Colour code 42 Nominal delay (ms) Yellow Colour code Nominal delay (ms) 150 Colour code Light blue Nominal delay (ms) 250 Colour code Dark pink 17 Blue 75 Red 175 Beige 25 Orange 100 Brown 200 Clear 33 Dark green 125 Light green 225 Grey
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Case 565 x 295 x 270mm 22
Technical Properties
Detonator strength Shock Tube Colour Core load of tubing VOD of tubing Water resistance 4 strength Green ~ 15mg/m ~ 2000m/s Excellent
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Severe impact on the detonator or tubing can result in accidental initiation and explosion Do not attempt to initiated shock tube and detonating cord simultaneously by means of the cluster connector block
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine Subject to quality confirmation
42
INITIATING SYSTEMS
Application
Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A length of shock tubing spooled onto a reel. One end of the tubing is crimped into a short period delay detonator. The detonator includes a rubber plug that has been crimped on one end. The free end of the shock tube is sealed and incorporates a colour coded cobra clip. The delay period is also printed along the length of the detonator. The detonator is fitted into a colour-coded cluster connector block. A tag attached to the shock tube indicates the length of tubing, as well as the delay period.
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Product Range
Nominal delay (ms) Colour code 25 Orange 33 Green
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Case 510x270x250mm 9
Technical Properties
Detonator strength Core load of tubing VOD of tubing Outside diameter of tubing Minimum initiator 4 strength ~ 15mg/m ~ 2000m/s ~ 3mm >3.6g/m detonating cord
200m 500m
43
INITIATING SYSTEMS
Application
Tunnelling Stoping Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A reel of shock tubing with a separate 10cm length of clear plastic joiner tubing, which can be used to join reels to extend the length of shock tubing as well as join an HTDA leading to the first hole on a blast. A black end cap is used to seal both ends of the tubing as to prevent powder loss and/or moisture ingression.
Special precautions
Store in a specially licensed, cool and dry area for not more than 18 months from the date of manufacture
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Product Range
500m
Packaging
Features Green coloured shock tubing 18kg minimum break load Joiner tube enables easy extension to required length Immune to hazards of radio frequency radiation, stray currents and static discharge
Technical Properties
Core load of tubing ~ 15mg/m VOD of tubing ~ 2000m/s Outside diameter of tubing ~ 3mm
500m
44
INITIATING SYSTEMS
A length of safety fuse capped with a detonator at one end and an igniter cord connector at the other.
Mining Method
Underground Narrow Reef
Application
Technical Specifications
Appearance
The AEL capped fuse products are supplied with a length of green Durafuse or red Stopefuse. The product varies in length depending on the depth of the hole.
Special precautions
Tunnelling Stoping
Handle with care - damage to the fuse or components could lead to misfires Severe impact on the detonator or the fuse can result in accidental initiation and explosion Avoid all possible sources of ignition Never pull the components off the fuse Never connect the blast until all the charging operations have been completed
Product Range
Product Stopefuse Fuse colour Red Fuse length (m) 0.9 or 0.9H 1.2 or 1.2H 1.5 or 1.5H 0.9 1.2 1.5 1.8 or 1.8H 2.1 2.4 or 2.4H 2.7 3.0 or 3.0H 3.3 or 3.3H 3.6 or 3.6H 3.9 Detonator 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D 6D/8D Burning rate (s/m) 240 - 300 240 - 300 240 - 300 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121 99 - 121
Features
Connector has a specially designed collar to retain igniter cord and ensure effective heat transfer Triple crimping of the detonator to the fuse, to provide effective seals against water and fuel-oil ingress Individual bundles are graded according to burning speed and colour coded to facilitate matching of corresponding burning speeds for optimal sequencing of shots Certain variants available in half packs
Durafuse
Green
Technical Properties
Detonator strength Sleep time Core load Dimensions Water resistance 6D or 8D 72 hours ~ 6.5g/m 4.8 to 5.1mm OD Excellent
45
INITIATING SYSTEMS
Mining Method
Underground Narrow Reef Massive Surface Opencast Openpit Quarrying Construction
Application
As a starter for Shock Tube
Technical Specifications
Appearance
The assemblies are constructed by crimping a slotted igniter cord connector at one end and a 6D strength detonator at the other end of the respective fuses.
Special precautions
Handle with care - detonators are explosive Temperatures >100C may result in spontaneous explosion Severe impact on the detonator or fuse may result in an explosion Avoid all possible sources of heat Never connect the blast until all charging operations have been completed
Packaging
Description Case
Technical Properties
Detonator strength Core load (fuse) Fuse diameter Water resistance 6D ~ 6.5g/m 4.8 to 5.0mm OD Excellent
Units per Dimensions case (mm) 100 300x270x575 Durafuse Stopefuse290 100 300x270x575 Fuse type
Product Range
Fuse length (m) Colour Average Burning time Green 132s = 2 min 12s Durafuse 1.2 Red Stopefuse 1.2 324s = 5 min 24s
Fuse type
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
46
INITIATING SYSTEMS
Mining Method
Underground Narrow Reef
Application
Tunnelling Stoping
Technical Specifications
Appearance
Four types of igniter cords are manufactured by AEL: Slowline a single cord that is ivory in colour. Duraline a single green cord equipped with a parallel wire to impart greater carcass strength Stopeline a red twin cord Stopeline 9 a mauve (purple) twin cord
Special precautions
Igniter cords are sensitive to impact, friction, flame, sparks and static discharge Igniter cords burn fiercely, even under water, producing a fireball of high temperature gas Avoid all possible sources of heat Temperatures above 160C may result in spontaneous ignition
Features
Flexible and easy to extend Easy to connect into branch lines Substantial heat output from the twin cords Burns under water
Packaging
Description Case
Stopeline
Technical Properties
Sleep Time Water resistance
72 hours
Excellent
Product Range
Type Stopeline Colour Burning rate Principal application (s/m) Sequential firing in narrow reef 30 to 45 Red
stoping. Use with 1.2 and 1.5 Stopfuse290 In narrow reef mining with short length holes or in applications requiring greater burning front. Use with 0.9m Stopefuse 290 Tunnelling and development where residual cord strength is of importance. Use with Durafuse Tunnelling, development and general purpose
10 x 50m 20 x 50m 10 x 2 x 50m 5 x 2 x 100m 10 x 100m 10 x 100m 5 x 2 x 100m 20 x 50m 10 x 2 x 50m 40 x 50m 10 x 4 x 50m 10 x 50m 20 x 100m 40 x 50m 10 x 4 x 50m
Stopeline 9
334 x 170 x 285 328 x 176 x 320 255 x 255 x 280 255 x 255 x 300
Duraline
512 x 220 x 230 542 x 230 x 230 275 x 220 x 125
Stopeline 9 Mauve
18 to 30
Slowline
255 x 255 x 280 512 x 220 x 230 542 x 230 x 230
Duraline
Green
30 to 45
Slowline
Ivory
30 to 45
47
INITIATING SYSTEMS
Mining Method
Underground Narrow Reef Massive
Application
Tunnelling Stoping
Technical Specifications
Appearance
A copper detonator that is crimped onto a yellow-coloured, flat 4-wire copper cable downline on one end and terminated with two over-moulded connectors on the other end.
Product Range
Downline x Surface Length (m) 1.8 x 0.9 1.8 x 0.9 (heavy duty) 4.2 x 0.9 6.0 x 0.9 7.5 x 0.9 Units per case 90 90 54 54 54 NEQ (kg) 0.090 0.090 0.054 0.054 0.054
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
48
INITIATING SYSTEMS
Application
Tunnelling Stoping Massive (uphole) Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A copper detonator that is crimped onto a round, redcoloured, twin-core steel downline on one end and terminated with a yellow connector on the other end.
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Packaging
Description Box Dimensions (L x B X H) Case 575 x 300 x 270mm
Technical Properties
Delay time Detonator strength Water resistance Wire diameter Set by user in 1ms steps, range is 1 to 20 000ms 8D Excellent ~3.5 mm outer diameter
49
INITIATING SYSTEMS
Mining Method
Underground Massive Surface Opencast Openpit Quarrying Construction
Application
Tunnelling Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A copper detonator that is crimped onto a green-coloured, flat 4-wire copper cable downline on one end and terminated with two over-moulded connectors on the other end.
Product Range
Length (m)
Downline 10 10 10 15 15 15 20 20 20 20 30 35 Surface 5 7 10 5 7 10 0.2 5 10 15 0.2 0.2
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Technical Properties
Delay time Detonator strength Water resistance Wire diameter Downline wire type Fully programmable - range is 1 to 20 000ms 8D Excellent Flat cable, 2mm Copper 4-wire
Packaging
Description Units per case Box Dimensions (L x B X H) NEQ (kg) Case 18 480 x 217 x 252 0.018
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion 50
INITIATING SYSTEMS
Mining Method
Underground Massive Surface Opencast Openpit Quarrying Construction
Application
Tunnelling Massive (uphole) Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
The detonator shell is copper with two steel wires covered in red PVC plastic as the downline and coils have clear plastic shrink sleeve
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Packaging
Description Box Dimensions (L x B X H) 1.1B
Length (m) 1.8 3.0 4.2 6 10 15 20 25 30 40 50 Units per case 120 102 78 66 60 42 30 30 24 18 12 NEQ (kg) 0.120 0.102 0.078 0.066 0.060 0.042 0.030 0.030 0.024 0.018 0.012
Technical Properties
Delay time Detonator strength Water resistance Wire diameter Fully programmable - range is 1 to 20 000ms 8D Excellent ~3.5 mm OD
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
51
INITIATING SYSTEMS
Mining Method
Underground Massive Surface Opencast Openpit Quarrying Construction
Application
Tunnelling Massive (uphole) Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
The detonator shell is copper with 2 -steel wires covered in green PVC plastic as the downline and coils have clear plastic shrink sleeve
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Packaging
Description Box Dimensions (L x B X H) 1.1B
Length (m) 1.8 3.0 4.2 6 10 15 20 25 30 40 50 Units per case 120 102 78 66 60 42 30 30 24 18 12 NEQ (kg) 0.120 0.102 0.078 0.066 0.060 0.042 0.030 0.030 0.024 0.018 0.012
Technical Properties
Delay time Detonator strength Water resistance Wire diameter Fully programmable - range is 1 to 20 000ms 8D Excellent 3.5mm OD
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion 52
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
INITIATING SYSTEMS
Mining Method
Surface Opencast Openpit Quarrying Construction
Application
Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
A copper detonator that is crimped onto a red-coloured, flat 4-wire copper cable downline on one end and terminated with two over-moulded connectors on the other end.
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Packaging
Description Box Dimensions (L x B X H) Length (m)
Downline 10 10 10 15 15 15 20 20 20 20 30 35 Surface 5 7 10 5 7 10 0.2 5 10 15 0.2 0.2
Technical Properties
Delay time Auto-Programmable - user needs to set inter-hole and inter-row delays 8D Excellent Copper 4-wire: Std (0-50) / Arctic (-30-+40)
Software Versions
HotShot Standard HotShot Hybrid HotShot + HotShot Tunnel
AEL Mining Services Limited Product Catalogue, 2011
53
INITIATING SYSTEMS
Mining Method
Underground Narrow Reef Coal
Application
Tunnelling Stoping Underground coal
Technical Specifications
Appearance
An electrically initiated copper tube detonator containing two insulated copper wires with white PVC plastic crimp plug. The colour of the wires vary depending on the delay number.
Product Range
Statsafe No 0 2 3 4 5 6 7 8 Delay (ms) 0 55 80 110 150 200 250 300 Colour Grey and Blue Grey and Orange Grey and Pink Grey and Red Grey and White Blue and Green Blue and Orange Blue and Pink
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Technical Properties
Delay time Bridge resistance Firing impulse Fusehead Base Charge 0 - 300ms 0.2 - 0.25? 50 - 70mJ/? Type 1 No. 63g PETN Product Shelf Life
Packaging
Description Box Dimensions (L x B X H) Gross weight (kg) Units per case Case 600 x 325 x 250mm 20 750
Safety Handling
Keep electric detonators away from all sources of electrical energy e.g. batteries, mains outlets, radios etc. Keep legwires shorted until connection into electrical blast circuit.
54
INITIATING SYSTEMS
The instantaneous electric detonator is used to initiate blasts by firing trunk lines of detonating cords or shock tube, secondary blasts and blasting gunpowder.
Mining Method
Underground Narrow Reef Surface Opencast Openpit Quarrying Construction
Application
Technical Specifications
Appearance
A copper detonator with white PVC leg wires wound in a figure of eight coil.
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Instantaneous Electric Detonators (IED) and Statsafe electric detonators may not be mixed in the same blast
Packaging
Description Box Dimensions (L x B X H) Gross weight (kg) Case 255 x 255 x 645mm 20
Technical Properties
Delay time Bridge wire resistance All firing impulse No fire current Fusehead Instantaneous 1 - 1.5 ? 3 - 5mJ/? 0.30 A for 50ms Type 0
Copper wire Wire length (m) 1.8 3.6 Units per case 1000 500
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
55
INITIATING SYSTEMS
Fuseheads are mainly used to initiate black powder in dimensional stone quarries and pyrotechnic charges in fireworks, security and safety systems.
Mining Method
Surface Quarrying
Application
Quarrying
Technical Specifications
Appearance
A length of white PVC covered copper wire wound in a figure of eight. A standard Vulcan fusehead attached to one end, with the other wire end stripped from PVC.
Special precautions
Handle with care - fuseheads are explosive Temperatures 90C may result in spontaneous explosion
Features Available with tangle-free wires Standard type 0 fusehead Figure eight wire winding
Packaging
Description Gross weight (kg)
Leading wire (m) 1.8 3.0 Units per case 1000 500
Case 12
L x B x H (mm) 535 x 185 x 192 455 x 372 x 177
Technical Properties
Delay time Bridge-Wire resistance All firing impulse No fire current Fusehead Instantaneous 1.25 ? 3 - 5mJ/? 0.30 A for 50ms Type 0
56
INITIATING SYSTEMS
Shurstarts are used to electrically initiate igniter cord in development ends and underground stoping. It can also initiate pyrotechnic charges in fireworks, security and safety systems.
Mining Method
Underground Narrow Reef
Application
Tunnelling Stoping
Technical Specifications
Appearance
A red plastic casing crimped onto PVC wires that are 350mm in length.
Special precautions
Handle with care - Shurstarts are explosive Always connect Shurstarts & igniter cord as shown on inner packaging.
Packaging
Description Gross weight (kg) Case 6
Technical Properties
Delay time Bridge-Wire resistance No fire current Wire Diameter Fusehead Instantaneous 1 - 1.5 ? 0.30 A for 50ms 0.5 mm Type 0
57
INITIATING SYSTEMS
This product is mainly used to electrically initiate shock tube in both surface and underground applications.
Mining Method
Underground Narrow Reef Surface Opencast Openpit Quarrying Construction
Application
Tunnelling Stoping Open Pit Quarrying
Technical Specifications
Appearance
An electrically initiated aluminium detonator contained in a green plastic connector body. It has white PVC coated leg wires 1.8m in length.
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion Do not attempt to initiate detonating cord with this product
Packaging
Description Dimensions (LxBxH) Gross weight (kg) Units per case Case 485x276x410 mm 13 200
Technical Properties
Delay time Bridge-Wire resistance All firing impulse Fusehead Instantaneous 0.2 - 0.25 ? 50 - 70 mJ/ ? Type 1
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
58
INITIATING SYSTEMS
NetShock is a revolutionary device that links the benefits of traditional shock tube systems with those of electronic blasting systems without the need to switch to electronic detonators.
Mining Method
Underground Narrow Reef Massive
Application
Tunnelling Stoping
Technical Specifications
Appearance
An aluminium tube which contains a 3G Fusehead PCB electronic detonator assembly with an integrally moulded clip allowing easy connection to shock tubes.
Technical Properties
Delay time Detonator strength Wire Diameter Instantaneous 2D 3.5mm OD
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Packaging
Features Provides the mines with computer driven centralised blasting functionality for conventional shock tube systems Provides pre- and post-blast diagnostics Includes an on-board diagnostic system for safe testing Compatible with the QuickShot centralised blasting system Description Dimensions (LxBxH) Gross weight (kg) NEQ (kg) Units per case Case 260 x 215 x 147mm 1.9 0.025 25
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
59
INITIATING SYSTEMS
NetStart is a revolutionary device that links the benefits of traditional capped fuse and igniter cord systems with those of electronic blasting systems without the need to switch to electronic detonators. NetStart is an incendiary device conveying flame to igniter cord to initiate blasting.
Mining Method
Underground Narrow Reef
Application
Tunnelling Stoping
Technical Specifications
Appearance
A green-coloured, outer plastic body possessing an integrally moulded clip with a flat, yellow harness wire assembly. The plastic body contains a 3G PCB fusehead assembly together with two pyrotechnic incendiary pellets.
Technical Properties
Delay time Wire Diameter Fusehead Type Instantaneous Flat cable 2mm 20mm triple clip
Special precautions
Handle with care - detonators are explosive Temperatures >90C may result in spontaneous explosion
Product Shelf Life Legal Storage* Expiry Date# (from date of manufacture)
Packaging
Description Dimensions (LxBxH) Gross weight (kg) NEQ (kg) Units per case Case 260 x 215 x 147mm 1.9 0.025 25
* Or legal requirements in region of operation # Latest dispatch date after manufacture from AEL magazine
60
INITIATING SYSTEMS
A Blast Current Indicator (BCI) is a standard Vulcan type 0 fusehead encased in a waterproof plastic body and connected to two short lead wires for easy connection to a blasting circuit. The BCI's are used to verify continuity and sufficient firing current transfer through the actual blasting circuit before a blast is to be fired. If use correctly, the possibility of a misfire through the circuit is significantly reduced.
Mining Method
Underground Narrow Reef Massive
Application
Tunnelling Stoping
Technical Specifications
Appearance
A semi-opaque plastic body encasing a fusehead with white PVC coated leg wires 200mm in length
Special precautions
Handle with care - BCIs are explosive Temperatures >90C may result in spontaneous explosion Store in a specially licensed, cool and dry area for not more than 12 months from the date of manufacture
61
INITIATING SYSTEMS
Detonating Cords
Mining Method
Flexible cords, which detonate at more than 6 000m per second. The cords are constructed using a continuous column of water-resistant pentaerythritol tetranitrate (PETN), wrapped in yars and overcoated with a waterproof coating. AEL Detonating Cords are colour coded according to explosive core strength.
Underground Narrow Reef Massive Surface Opencast Openpit Quarrying Construction
Application
Tunnelling Stoping Massive (uphole) Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
The detonating cord product range is supplied under the trade name of Powercord. Three products Powercord 6, Powercord 8 and Powercord 10 - are distinguished from each other by colour and by the mass of core load. Powercord 6 is orange in colour and has an explosive core load of 6g/m. Powercord 8 is blue and has an explosive core load of 8g/m and Powercord 10 is yellow and has an explosive core load of 10g/m.
Product Range
PETN core Tensile External load (g/m) strength (kg) diameter (mm) 6 > 80 3.9-4.3 Powercord 6 8 4.3-4.5 > 80 Powercord 8 4.8-5.2 10 > 80 Powercord 10 Product
Special precautions
Handle with care - damage to the product could lead to misfires Keep away from all sources of ignition Avoid all forms of shock Never connect the blast until all charging operations have been completed Keep free ends short to avoid excessive noise, shrapnel and cut-offs.
Packaging
Description Case
Length per Box dimensions case (m) (mm) 2 x 500 500x260x235 Powercord 6 2 x 350 500x260x235 Powercord 8 10 x 30 500x260x235 Powercord 8 500x260x235 Powercord 10 2 x 350 500x260x235 Powercord 10 10 x 30 Product
Technical Properties
Velocity of Detonation Water resistance 6000m/s Excellent
INITIATING SYSTEMS
Mining Method
Underground Narrow Reef Massive Surface Opencast Openpit Quarrying Construction
Application
Tunnelling Stoping Massive (uphole) Ring Blasting Trenching Open Pit Quarrying Civils
Technical Specifications
Appearance
The 60g, 150g, 250g, 400g and 400g Smart pentolite primers are coloured orange, red, purple, blue and yellow respectively. Apart from colour, they are also distinguishable by size. The numbers in the product name describes the weight of Pentolite in each respective primer.
Special precautions
Handle with care - damage to the product may lead to misfires Keep away from all sources of ignition Temperatures in excess of 90C may result in spontaneous explosion Avoid all possible sources of heat Never connect the blast until all charging operations have been completed
Storage Conditions
Store in an approved segregated, cool and well ventilated magazine 5 years from date of manufacture 6 months in customer magazine
Product Range
Pentolite mass (g) Colour OD (mm) Straight channel Stepped channel dia. 0.2mm dia. 0.2mm
60g Pentolite Primer Orange 150g Pentolite hybrid Red Primer 250g Pentolite Primer Purple 400g Pentolite Primer Blue 400g Pentolite Smart Yellow Primer
AEL Mining Services Limited
35 38 46 53 53
60g Pentolite Primer 150g Pentolite hybrid Primer 250g Pentolite Primer 400g Pentolite Primer 400g Pentolite Primer (half pack) 400g Pentolite Smart Primer
240 120 80 60 45 60
Box Gross weight dimensions (kg) (mm) 435 x 360 x 295 23 420 x 235 x 325 26 430 x 235 x 235 348 x 277 x 334 490 x 290 x 195 346 x 277 x 334 26 26 20 26
63
INITIATING SYSTEMS
Detonating relays are used with detonating cord to connect successive blast holes in surface applications, where delays between holes or row of holes are required.
Mining Method
Surface Opencast Openpit Quarrying Construction
Application
Open Pit Quarrying Civils
Technical Specifications
Appearance
A semi-rigid, red or green plastic housing 90mm long and 10mm thick, which has an appearance of a "dog bone". It is fitted with two aluminium detonators containing lead delay elements.
Special Precautions
Keep free ands of detonating cords short to prevent cutoffs or bypassing of the delay.
Packaging
Description Dimension (LxBxH) Gross weight (kg) Product 25 40 Colour Green Red Case 300 x 295 x 545mm 13 Units per case 1000 1000
Product Range
Delay time (ms) 25 40 Colour Green Red
64
INITIATING SYSTEMS
Donor
AEL Shock Tube Shock Tube Uni-Delay LP Shock Tube Splitter Shock Tube Multi LPD Shock Tube Multi SPD Shock Tube Uni-Delay SP Shock Tube Trunkline Shock Tube Cluster Shock Tube Lead-In Shock Tube Extender AEL Capped Fuse & Igniter Cord Capped Fuse Systems - Stopefuse Capped Fuse Systems - Durafuse Capped Fuse Systems - Shock Tube Starter Capped Fuse Systems - Stopeline Capped Fuse Systems - Stopeline 9 Capped Fuse Systems - Slowline Capped Fuse Systems - Duraline AEL Electronic Detonators Electronic Delay Detonators - QuickShot Electronic Delay Detonators - Smartdet Electronic Delay Detonators - SmartShot Electronic Delay Detonators - DigiShot Electronic Delay Detonators - DigiShot Plus Electronic Delay Detonators - HotShot AEL Electric Initiators Electric Initiators - Statsafe Detonators Instantaneous Electric Detonator (IED) Electric Initiators - Fusehead Assembly Electric Initiators - Shurstart Capped Fuse Systems - Shock Tube Starter AEL Electronic Initiators AEL Electronic Initiators - NetStart AEL Electronic Initiators - NetShock AEL Initiating Accessories Blast Current Indicator (BCI) AEL Detonating Cord AEL Detonating Cord - Powercord 6 AEL Detonating Cord - Powercord 8 AEL Detonating Cord - Powercord 10 AEL Detonating Relays AEL Primers
Tape Plastic connector provided Recommended Inhole det only Use joiner only to extend ST Compatible
65
INITIATING SYSTEMS
Notes
66
Blasting Accessories
Wealth Unearthed
BLASTING ACCESSORIES
Mining Method
Underground Narrow Reef Massive
Application
Tunnelling Stoping
Technical Specifications
Appearance
Plastic device onto which an AEL detonator is clipped. Detonator can be electronic, electric or non-electric
Packaging
Description Units per case / bag Case 500 units per case
68
BLASTING ACCESSORIES
The Hot Hole Monitor is a device which monitors temperature changes in hot holes and reduces the risk posed by premature detonation in surface coal mining.
Mining Method
Surface Opencast Openpit
Application
Open Pit
Technical Specifications
Appearance
A red plastic device containing various lengths of wire with thermocouple on the end of the wire
Packaging
Description Units per case / bag Case 30 units per case
69
BLASTING ACCESSORIES
Notes
70
Industrial Products
Wealth Unearthed
AEL industrial is recognised as a logistical leader in the industrial solutions arena and, with strong African supply footprints, the company effectively addresses requirements in South Africa, Africa and selected international markets.
With direct access to AEL's large team of leading engineers and scientists, the industrial products division is in a position to offer a broader range of highly versatile industrial solutions, which perform well against strict quality parameters and incorporate major innovations (such as curing before bagging) that add to the structural integrity of the product and ensure better end results. In fact, it is AEL's innovative approach to product betterment and its constant monitoring of industrial updates that has enabled it to ensure a 50 percent reduction in expected failure rates. The range includes Ammonium Nitrate (AN), acids and ammonia-based solutions, all of which are conveniently sourced from AEL's industrial hub in Gauteng, are known for their consistency when it comes to product quality and are effectively supported by a team of highly skilled staffers. At the base of every mine operation is a solid supply of reliable, high quality industrial products. Without products like those provided by this division, very little would move and it is being a consistent and reliable provider of industrial products and solutions that AEL has positioned itself as the leading supplier in this space. The industrial products division employs the highly skilled Research and Development facilities within AEL's structure as well as advanced manufacturing technologies to ensure ongoing improvement in its product performance. The industrial products division offers a proven track record in dispatch efficiency and in product containment and handling, and customers acknowledge the department for not only its high quality product offering and effective administrative systems, but also for its ethical behaviour when it comes to orders and deliverables. AEL's industrial products division is prepared for any eventuality and is proud to be able to say that it can and will continue to effectively address all of its customer's requirements in the industrial solutions arena, whilst maintaining its already high levels of customer service and technical support.
INDUSTRIAL PRODUCTS
Essentially ammonium nitrate (NH4NO3) presented in the form of coarse, porous, hardened spherical particles, obtained by spraying the melted material. The material is treated with an anti-caking agent.
Application
Bulk Anfo explosives
Technical Specifications
Appearance
The material is presented in the form of free-flowing, white to cream-coloured, spherical particles free from grit, visible impurities and foreign matter.
Special precautions
ANA is moderately toxic and may decompose under confinement and high temperature - under extreme conditions an explosion may occur.
Packaging
Bags 25kg 50kg 1 000kg 1 200kg Bulk tanker Rapid Reloading System (RRS) Rail
Technical Properties
Appearance Concentration Oil absorption Bulk density Moisture Coarse, porous, hardened spherical particles Not less than 99.5% (m/m) as ammonium nitrate (when packed) Not less than 6.0% (m/m) To lie within the range 0.69 to 0.77g/cm Less than 0.2%
Bulk
72
INDUSTRIAL PRODUCTS
Application
Manufacture of emulsion matrix
Technical Specifications
Appearance
The material is presented in the form of glossy white spherical particles free from visible impurities and foreign matter.
Special precautions
ANE is moderately toxic and may decompose under confinement and high temperatures under extreme conditions an explosion may occur
Packaging Packed in robust woven polypropylene bags with inner polyethylene liners to minimise moisture ingress All bags have UN certification and conform to international requirements Bags: 1 050kg; 1 200kg
Technical Properties
Appearance Concentration Bulk density Glossy-white spherical particles Not less than 94.2% (m/m) as ammonium nitrate (when packed) To lie within the range 0.80 to 0.97 g/cm
73
INDUSTRIAL PRODUCTS
Application
Manufacture of emulsion matrix Fertiliser raw material
Technical Specifications
Appearance
A concentrated aqueous solution of ammonium nitrate (NH4NO3) used in the manufacture of emulsion matrix.
Special precautions
ANS may become explosive after dewatering, it is important to keep the material in solution.
30 tons
Technical Properties
Appearance Concentration Bulk density Reaction ANS is a clear liquid, free from suspended matter and visible impurities. Transport (UN Classification) To lie within the range 87.5% to 89.5% Class 5.1 UN No 2426 Elevated temperature OXIDISING AGENT (m/m) as NH4NO3 At 120C: ca. 1.36g/cm pH of 50% solution at 60C to lie within the range 3.3 to 3.9
74
INDUSTRIAL PRODUCTS
Nitric Acid
Essentially an aqueous solution of nitric acid (HNO3) in the form of a clear colourless to pale yellow, fuming, corrosive liquid with a pungent odour used mainly in ANS production.
Application
Manufacture of AN-S and other industrial chemicals
Technical Specifications
Appearance
NA 60%: The material is a clear, colourless to pale yellow, fuming liquid, free from visible impurities and sediments. NA 93% and 96%: The material is a clear, colourless to pale yellow, fuming liquid, free from visible impurities and sediments.
Product Range
Available in the following range: Nitric Acid 96% Nitric Acid 93% Nitric Acid 60%
Special precautions
Full protective clothing and a face shield should be worn when handling Nitric Acid It is highly corrosive and attacks most metals vigorously It is also a powerful oxidising agent that can react violently with organic substances
Packaging Bulk road tankers Transport (UN Classification) Class 8, UN No 2031 (60%); 2032 (93% and 96%), Corrosive Material OXIDISING AGENT
Technical Properties
Concentration Bulk density Nitric acid 58 to 97%, balance water At 20C: 1.367g/cm
75
INDUSTRIAL PRODUCTS
Aqueous Ammonia
Essentially an aqueous solution of ammonia (ammonium hydroxide, NH4OH) in the form of a clear, colourless to s lightly yellowish liquid with a pungent, suffocating odour.
Application
Tanker at the loading bay in Modderfontein plant.
1. Liquid fertiliser 2. Manufacture of industrial and fine chemicals 3. Metal recovery processes 4. Neutralizing agent for acids 5. Water purification
Technical Specifications
Appearance
A concentrated aqueous solution of ammonium nitrate (NH4NO3) used in the manufacture of emulsion matrix.
Special precautions
Avoid ingestion, inhalation, contact with the skin and eyes Wear full protective clothing when handling the material and ensure adequate ventilation Avoid sources of ignition and heat Care must be exercised when opening the valves
Storage
Storage tanks must be earthed for protection against lightning or static electricity Storage tanks should be in a well ventilated area away from direct sunlight and heat.
Technical Properties
Appearance Concentration Density Colourless liquid, pungent odour Not less than 25% ammonia content Not more than 0.88g/cm
Safety Handling
Avoid contact with skin/eyes Do not breathe vapour Avoid ingestion
Transport (UN Classification) Hazchem Code: 2P, UN No. 2672, Packing Group 111, IMDG Class 8, Shipping name AMMONIA SOLUTION (10 35 % zammonia)
76
INDUSTRIAL PRODUCTS
Application
Ammonia tank in Modderfontein plant
Ammonia 100-I Manufacture of Nitric Acid Manufacture of ANS Manufacture of other chemicals Ammonia 100-R Refrigeration liquid
Technical Specifications
Appearance
Colourless liquid at low temperatures or under pressure , pungent odour Colourless gas at atmospheric pressure and temperature, pungent odour
Special precautions
Avoid ingestion, inhalation, contact with the skin and eyes Wear full protective clothing when handling the material and ensure adequate ventilation Avoid sources of ignition and heat Care must be exercised when opening the valves
Technical Properties
Concentration Density Ammonia Ca. 100 percent 0.61g/cm at 20C
Packaging Sold in bulk Transport (UN Classification) Hazchem Code: 2PE, UN No. 1005 - IMDG Class: 2(2.3), Shipping Name: AMMONIA, ANHYDROUS, LIQUEFIED
Safety Handling
Avoid contact with skin/eyes Do not breathe vapour Avoid ingestion
77
INDUSTRIAL PRODUCTS
Notes
78
Services
Wealth Unearthed
SERVICES
AEL Mining Optimisation promotes consistently good blasts, as this is the basis for improved productivity, sustainability and added value for its customers around the world. The division's highly skilled engineers assist mines to ensure that blasting is conducted efficiently and cost effectively. AEL Mining Optimisation delivers data, expertise, systems, software and support in a way that will help customers meet their production targets. AEL is acutely aware that the sustainability of any mining operation is reliant on its social and environmental responsibility. The Mining Optimisation team therefore takes utmost care in designing blasting solutions that are not detrimental to people or the environment.
The blast monitoring and blast enhancement offerings provide customers with information and alternate design approaches needed for productive operations and good neighbourly conduct in communities. The team constantly researches latest technologies and links these with continuous education around how best to design blasting solutions for optimal results. AEL Mining Optimisation has adopted a three-pronged approach to satisfy customer needs: Blast Optimisation specifically focuses on our customers' requirements and the impact blasting would have on the environment. Safety, as always, is our primary objective! In order to optimise blasting, AEL has a number of tools and methodologies specifically designed to make scientific and informed decisions around blast performance assessment. Data collection and benchmarking Rock characterisation Blast and timing design Blast hole assessment Vibration and airblast monitoring Velocity of detonation measurement Mining Productivity looks at the mining operation holistically to ensure that the benefits are derived from improved efficiency in equipment, plant and benefication. AEL will conduct various checks to ensure that blasted rock suits and compliments the design of equipment and plant: Face velocity measurement 3D blast face survey High speed videography Rock mass motion study Muck profile study Fragmentation analysis Blast modeling Efficiency measurement and monitoring This is supported by AEL's sophisticated blasting software: Winprof_AEL AEL Tie_Up Tunnel 2000 Ring 2000 Hybrid Stress Blasting Model (HSBM) AEL's Active Loading system enables real time information pertaining to blasting parameters, ie: condition of blast hole, types of explosives loaded, quantity of explosives loaded, etc. This information is stored in a database for future analysis, comparison and fine tuning of blast inputs and results. Expert Training for blasters and supervisors is offered by AEL's Mining Optimisation team. The Blasting Competency Program is offered for surface as well as underground operations. The Explosive Handler, Blast Assistant and Rock Breaking courses are the basis for certification through the MQA to become a licensed blaster and meet statutory laws. The Explosive Engineer's course is a graduate level course given to train technical blasting and field staff. It focuses on advanced blasting applications and productivity improvement and equip AEL staff with the relevant knowledge to provide customers with value adding recommendations.
AEL Mining Services Limited Product Catalogue, 2011
80
SERVICES
Product Services
In applying meticulous care to the deployment of its range of products, AEL offers a range of services to ensure that customers receive optimum blast performance. AEL assists customers to meet environmental, safety and legal requirements while at the same time achieving blast efficiency. AEL deploys established methodologies that present customers with a wide range of customised options and choices, all of which ultimately lead to successful blasts.
Down the Hole Services AEL provides down the hole services on the bench and on time, assisting in measuring holes products and managing quality checks during preparation of the blast. Application-specific explosives produced at the customer's operation is extremely cost efficient, as it allows for total flexibility, as well as last minute changes on the bench to suit the different mine's blasting requirements. Prime, Load, Tie and/or Shoot (PLTS) Taking things one step further, while offering the same services as those included in its Down the Hole offering, AEL has upped the ante with its Prime, Load, Tie and/or Shoot (PLTS) service, which addresses the requirements of customers that face resource and construction constraints and therefore require a solution to these problems without the need to hire more or upskill existing members of staff. Opting for either the Fixed or Per Blasted Unit service, customers have access to AEL expertise on site for the duration of individual blasts. Deploying AEL's PLTS service empowers customers with higher levels of convenience as AEL's technical teams of expert crews (all accredited to adhere to legal compliance regulations) become an integral part of the production, planning and blasting operations. Using AEL's full PLTS service means customers have access to hands on involvement on AEL's part as their teams will manage the stemming of blast holes, mark out and fire rounds and take on the legal accountability of the blasts, in addition to the services offered in its PLT offering. Rock on Ground (underground and surface) For customers who wish to hand over the reins of particularly taxing blasting environments, AEL offers its Rock on Ground service, which sees a shift in responsibility (in both drilling and secondary break scenarios) and costs to the AEL team. Customers can feel assured that they will receive a comprehensively planned and designed solution when they opt for the full blasting service. In return for a cost per unit (using measurements of choice cubes, metres, etc.) price, customers deploying AEL's Rock on Ground solution are assured of: Effective blast preparation; Thorough charging and timing of operations; Stock control and security of supply (including ordering, control, storage and stock management); Labour supply (only accredited and skill staffers) to manage charging and timing of operations; Zero tolerance where safety is concerned; and Dedicated and experienced AEL staff who adapt their skill sets to suit the environment while enhancing it with these services.
81
SERVICES
Notes
82
Equipment Services
Wealth Unearthed
AEL Equipment Services is an international-level supplier of original equipment and aftermarket parts and services tailored to the needs of the blasting professional in both underground and surface mining industries.
Due to its long standing relationships with component manufacturers across the globe, AEL Equipment Services holds impressive buying power and can offer its customers the best possible lead times on deliverables and the best pricing available. The division understands that their customers work in environments that leave no room for error and that they cannot afford to speculate on the consistency and safety of their equipment. It is for these reasons that each machine component is exhaustively tested with all possible risk factors in mind before and after the equipment is actually assembled. Proper functioning of blast and mine equipment is mission critical for successful operation on these sites and is significantly important to the safety of the mine staff and surrounding public. AEL Equipment Services offers extensive equipment evaluations and the division's strict testing criteria not only determines observance of applicable standards, but offers greater assurance in the reliability of the equipment provided. The equipment supplied through AEL Equipment Services is designed to specification and can be customised to suit any blast environment. Once the machines are assembled at the AEL plant they are commissioned and calibrated by a team of professionals with a keen eye for detail. Only once each and every member of the team has signed off on the machines will they be registered to manufacture explosives and be delivered to the site. As with all AEL divisions, safety and effectiveness is always top of mind within the AEL Equipment Services division. The team offers a range of Mobile Manufacturing Units (MMUs), portable charging units, underground mobile charging units and a vast range of other plant equipment components. With access to both local, internal and international level support and training, the team is renowned for its after sales service and support. Turnaround time on support or service related queries has been vastly shortened and the division is confident that it can offer its customers the peace of mind in knowing that their equipment will be reliably supported in the field.
EQUIPMENT SERVICES
Technical Specifications
Benefits and Features
Benefits
Proven on-bench reliability Integrated control systems, which guarantee constant delivery of requested product quality/quantity A range of products can be applied on one bench depending on conditions Varying pumping and auguring rates to suit bench hole diameters and conditions Minimal on-bench product spills during start-up/shut-down operations
R Series H Series
A Series
Product Range
Product Augering ANFO Prill Blend Percentage by Pump (0% to 35%) Prill Blend Percentage by Auger (20% to 70%) Product Pump Hose length and diameter (40m x 32mm) Product Pump Hose length and diameter (50m x 50mm) Safety Devices (High / Low Pressure) Safety Devices (High / Low Temperature) Safety Devices (High Pressure Bursting Disc) No of Emergency stop locations 750 750 3 3 3 3 3 250/500/750 250/500/750 3 3 Product Catalogue, 2011
Features
Pump protection-guarding against dead-heading and dry-running scenarios Strainers on the bin to prevent ingress of foreign objects Closed loop hydraulic control system guarantees product quality In-cab touch-screen user interface Suitable chassis with all standard safety devices selected for rugged on-bench conditions
Safety Features
Independent electronic pump protection system monitoring and controlling operating pressures and temperatures on critical pumps Mechanical pump protection devices installed on all critical pumps Emergency stops situated at critical locations Hydraulically operated positive locking handrails provide safe operation when access to top of truck is required
Technical Properties
Closed loop hydraulic system Independent pump safety control system Max Augering rate of 750kg/min on blend and ANFO products In cab electrical control panel Touch-screen user interface Siemens PLC Control
MMU Type AEL E series MMU E 20T E 15T AEL R series MMU R 3T R 6T R 10T AEL H series MMU H 20T AEL A series MMU A 12T
84
Emulsion Bin Capacity (T) Prill Bin Capacity (T) Product Pumping Rate (Kg/Min)
EQUIPMENT SERVICES
Technical Specifications
Benefits and Features
Benefits Proven reliability in all charging applications Integrated control systems, which guarantee constant delivery of requested product quality/quantity A range of products can be applied depending on conditions Product pumping rates reduce face/panel charging times Minimal product spills during start-up/shut-down operations Features Pump protection-guarding against dead-heading and dry-running scenarios Strainers on the bin to prevent ingress of foreign objects Remote control by pendant Unit capable of pumping at elevated heights. Charging units can be mounted on all utility vehicles.
Product Range
Underground Mobile Charging Units (MCU) MCU 1.5T H/E/etc H = Hydraulic E = Electric MCU 2T H/E/etc HE = Electric Power Pack A = Pneumatic E = Electric MCU 3T H/E/etc . P = Perimeter blasting B = Direct Drive on Cat Pumps D = Direct Drive on Product Pump MCU 0.75T LCB = Direct Drive on Cat Pumps LC = Land Cruiser Unit MCU Jumbo Jumbo = Up/Down Hole Charging Unit D = direct drive on orbit pump A = pneumatic HE = hydraulic over electric SS = shaft sinking LC = land cruiser K2 = uphole charging
Safety Features
Independent electronic pump protection system monitoring and controlling operating pressures on critical pumps Mechanical pump protection devices installed on all critical pumps Emergency stops situated at critical locations Up-hole charging from a safe distance via remote control pendant (MCU Jumbo) Units have a meltable sight-glass on emulsion tank, which ruptures when exposed to heat
Technical Properties
Hydraulic system supplied from utility vehicle ranged from 20 100 litres per minute at 160 bar Independent pump safety control system Max pumping rates range between 30 and 80kg per minute User-friendly control panel - operator interface Fully automated hose handling system (MCU Jumbo) PLC controlled system operating from 12 or 24 volt DC
Recommendations for use Underground mining operations with a requirement for all bulk explosives products
85
EQUIPMENT SERVICES
Technical Specifications
Application
Used for charging bulk emulsion in underground narrow reef mining environments. The focus area for the PCU08 pump is narrow reef stoping. However, the pump can also be used in standard development up to four metres in height and width. The pump is generally used in conjunction with bagged emulsion. Features Electric PCU08 pump used in conjunction with Hilti Drill. Hilti drill is power source and K required. Compressed air driven Trigger at pump and at lance (optional) Made of plastic and is lightweight Fixed batch or continuous delivery mode Easy to use and maintain
86
EQUIPMENT SERVICES
Technical Specifications
Benefits and Features
Benefits Proven reliability in remote sites Integrated control systems which guarantee constant delivery of quality product A range of products can be produced by a single plant. Emulsion Plants are designed to be Zero Effluent plants. Features Pump protection-guarding against dead-heading and dry-running scenarios Strainers in the suction line to prevent ingress of foreign objects Closed loop hydraulic control system guarantees product quality In-plant touch-screen user interface Modular Plant built into standard size containers to facilitate the transportation and installation on remote sites.
Technical Properties
Closed loop hydraulic system Independent pump safety control system Max Production rate of 350 Kg/min In plant electrical control panel Touch-screen user interface Siemens PLC Control
Recommendations for use Opencast and Underground mining operations with a requirement for bulk explosives products.
Safety Features
Independent electronic pump protection system monitoring and controlling operating pressures and temperatures on critical pumps. Mechanical pump protection devices installed on all critical pumps. Temperature control systems installed on emulsion dissolving module. Emergency stops situated at critical locations.
87
Initiating Systems
Old name Reefmaster Assembly Splitter Assembly Stopemaster Assembly / Benchmaster Assembly Tunnelmaster Assembly Handimaster Assembly / Dualmaster Handimaster Trunkline Delay Assembly/Trunkmaster Noisemaster Trunkline Delay Assembly Noisemaster Lead-in Assembly Noisemaster Extender Stopefuse 290 Durafuse Masterstarter Stopeline Stopeline 9 Duraline Shock tube - Multi LPD Shock tube - Uni-Delay SP Shock tube - Trunkline Shock tube - Cluster Shock tube - Lead-in Shock tube - Extender Capped Fuse Systems Stopefuse Capped Fuse Systems Durafuse Capped Fuse Systems Shock tube Starter Capped Fuse Systems Stopeline Capped Fuse Systems Stopeline 9 Capped Fuse Systems Duraline Capped Fuse Systems Slowline Electronic Delay Detonators QuickShot Plus Electronic Delay Detonators Smartdet Electronic Delay Detonators SmartShot Electronic Delay Detonators DigiShot Electronic Delay Detonators DigiShot Plus Electronic Delay Detonators HotShot Electric Initiators Statsafe Detonators Electric Initiators Instantaneous Electric Detonator (IED) NetShock NetStart New name Shock tube - Uni-Delay LP Shock tube - Splitter Shock tube - Multi SPD Shurstart Electric Handistart Old name Vulcan Fusehead Assembly New name Electric Initiators - Fusehead Assembly Electric Initiators - Shurstart Electric Initiators - Shock tube Starter Electronic Initiators NetShock Electronic Initiators NetStart Blast Current Indicator (BCI) Powercord 6 Powercord 8 Powercord 10 60g Pentolite Primer 150g Pentolite Primer - Hybrid 250g Pentolite Primer 400g Pentolite Primer 400g Pentolite Primer - Smart Detonating Relays
Blast Current Indicator (BCI) Cobracord Powercord Cordtex 10 60g Proboost Booster 150g Hybrid Booster 250g Booster 400g Booster 400g Smartdet Booster Detonating Relays
88
Packaged Explosives
Old name Magnum Buster Magnum Buster Gel Magnum 365 Gel Magnum Control Magnum Frag Magnum Plus New name Magnum Buster Magnum Buster Gel Magnum 365 Gel Magnum Control Magnum Frag Magnum Plus
Notes
*AEL Mining Services has retained the Magnum Trademark and will use it in Africa and her off-shore islands ONLY
Specialised Explosives
Energex Barrel Blasting Gunpowder PE Barrel Blasting Gunpowder
Industrial Products
Old name Ammonium Nitrate Porous Prill (ANPP) Free Flowing Ammonium Nitrate (Anflow) Ammonium Nitrate Solution (ANS) Nitric Acid 60% Nitric Acid 93% Nitric Acid 96% Ammonia Solution 25% Anhydrous Ammonia Industrial Grade Anhydrous Ammonia Refrigerated Grade New name Ammonium Nitrate Anfo Grade (ANA) Ammonium Nitrate Emulsion Grade (ANE) Ammonium Nitrate Solution (ANS) Nitric Acid 60% Nitric Acid 93% Nitric Acid 96% Aqueous Ammonia Ammonia 100-I Ammonia 100-R
Blasting Accessories
Mantis Hot Hole Detector Mantis Hot Hole Monitor
Equipment Services
Mobile Manufacturing Units (MMU) Mobile Charging Units (MCUs) Equipment services Portable Charging Units (PCU) Emulsion Plant 10T, 20T Mobile Manufacturing Units (MMU) Mobile Charging Units (MCUs) Equipment services Portable Charging Units (PCU) Emulsion Plant 10T, 20T
89
www.aelminingservices.com