Académique Documents
Professionnel Documents
Culture Documents
Style
ROTOSWITCH
MP78730
051-40141
RK40140
Standard Rocker
051-40142
051-19401 051-19411
RK19400S
RK19410RED
Standard Contura
RK19410
RK19420
051-19540 051-19550
Standard Toggle
*TG40160 contains face plate for bilge pump function **Switch illuminates white when dash lights are turned On. Changes to red light when switch is in On position.
Switch lights ONLY when dash lights are on.
***Two paddles (One Grey, one Black) - All rockers require 27/32" x 1-29/64" rectangular cut out. - All toggles mount in 15/32" diameter panel hole. - Boot nuts available for weatherproofing toggle switches. CONTURA is a registered trademark of CARLINGSWITCH, Inc., Plainville, CT. 15 Amp @ 12 Volts
172
Weatherproof Boot Nut for toggle switches #051-40061, #051-40071 #051-40081, #051-40091. 1/2" boot seals out moisture yet allows illumination to show. ORDER NO. 051-39221
One Piece Weather Proof Boot Nut seals out moisture and dust. Use with toggle switches #051-40021, #4030-1, #051-40040-1, #051-40050-1, #051-40161, #051-40460-1. Solid black rubber. Not for illuminated switches. ORDER NO. 051-39241
NOTE: Lamps in diagrams are not shown in any relationship to actuator indicators. (+) Power (Battery) in circuit diagrams 9, 10, & 11 must be connected to terminal #2 to light switch lamps (indicators).
173
SWITCHES
Non-corrosive plastic construction Protects against dust and prolonged spray to IP66 and IP68 standards Meets UL 1500, ISO 8846 ignition protection requirements Supplied with neoprene mounting gasket Removable actuators Brass blade terminals, silver contacts Rated: 20 amps @ 12VDC
ROCKER SWITCH
On-Off SPST Black Universal
ROCKER SWITCH
On-Off SPST Black/Grey Universal
ROCKER SWITCH
On-Off-On SPDT Black Universal
ROCKER SWITCH
On-Off SPDT Black/Grey Universal
TOGGLE SWITCH
On-Off SPST Universal
TOGGLE SWITCH
On-Off-On SPDT Universal
TOGGLE SWITCH
On-Off-On DPDT Universal
TOGGLE SWITCH
(On)-Off SPST Universal
TOGGLE SWITCH
(On)-Off-(On) SPDT Universal
174
SWITCHES
WEATHER RESISTANT ILLUMINATED ROCKER SWITCH KITS
OFF-ON SPST Dependent pilot light - Illuminates in ON position Kit includes 1 lens of each colour Snap in lens of choice Lens Colour Amber RK19500A Clear RK19500C Green RK19500G Red RK19500R Rated: 20 amps @ 12 VDC Mfr. No. RK19500K ORDER NO. 051-19501 ON-OFF-ON SPDT Dependent pilot lights - Each light illuminates in ON position OFF-ON SPST Dependent pilot light - Illuminates in ON position Kit includes 1 lens of each colour Snap in lens of choice Lens Colour Amber RK19510A RK19510C Clear Green RK19510G Red RK19510R Rated: 20 amps @ 12 VDC Mfr. No. RK19510K ORDER NO. 051-19511
OFF-ON SPST One dependent pilot light - Illuminates in ON position One independent pilot light - Illuminates when panel lights ON Snap in lens of choice Kit includes 2 of each colour Lens Colour Lens Colour Top Bottom Amber Clear RK19530AC Amber Green RK19530AG Green Clear RK19530GC Red Clear RK19530RC Rated: 20 amps @ 12 VDC Mfr. No. RK19530K ORDER NO. 051-19531
Snap in lens of choice Kit includes 2 of each colour Lens Colour Lens Colour Top Bottom Amber Clear RK19520AC Amber Green RK19520AG Green Clear RK19520GC Red Clear RK19520RC Rated: 20 amps @ 12 VDC Mfr. No. RK19520K ORDER NO. 051-19521
175
425-54030
425-54032
Certified for prolonged submersion under pressure (front panel sealing) and is UL Ignition Protected. Features an easy-to-change actuator (rocker) to allow changes in the actuator color or style.
176
SWITCHES
Stamped Brass/Injection Molded Nylon/Polycarbonate Amp 15A Volt 12V A 3/8" B 1/2"
TOGGLE SWITCH
Action On/Off Mom. On/Off On/Off/On Mom. On/Off/Mom. On On/Off/On Mom. On/Off/Mom. On
TOGGLE SWITCH
Stamped Brass
A= 3/8" B= 7/16" Circuit: SPST Action: On/Off Amps: 15 Mfr. No. 420465-1
Mfr. No.
Circuit
Volts 12 V 12 V
A 3/8" 3/8"
B 1/2" 1/2"
CONTURA SWITCH
Amps Volts 20 A 12 V 20 A 12 V
Amps 20 A 20 A 20 A
Volts 12 V 12 V 12 V
Volts 12 V 12 V
A 7/8" 7/8"
B 1-7/16" 1-7/16"
ROCKER SWITCH
Stamped Brass/Injection Molded Nylon/Polycarbonate A= 1/2" B = 1-1/8" Illuminating: Yes
Amp 15A
ORDER NO. 424-20251 424-20253
Volt 12V
A 7/8"
B 1-7/16"
Amps 15A
Volts 12V
FOOT SWITCH
Stamped 304 Stainless/Rubber Cover
Amperage 25
Fastener # 8 RH
177
Emergency cut-off switch with coiled lanyard. Will provide a normally open or normally closed circuit. MP40970-1* ORDER NO. 051-40970-1 *Clamshell
MAGNETO
PUSH TO CHOKE 3 POSITION 0FF-IGN-START (CHOKE) MAGNETO 4-POSITION MAGNETO 3-POSITION
0 CONVENTIONAL
4-POS. ACC- ACC-OFF-IGN-START 3-POSITION OFF-IGN-START
TERMINAL TYPE
NUMBER Number IN in BOX box DENOTES HOW many MANY denotes how WIRES ONLY POTTED BASE BOSS/SCREW TYPE SCREW TYPE
POLYESTER
Mfr.No.
ORDER NO.
Mfr.No.
ORDER NO.
MP39040
051-39040
X X
5 3 3 3 3 6 X 4 5 6 6 1 X X X X X X X X
BRASS
X X
X X X X X X X X X X X X X X X X
MP39060-1
051-39060-1
MP39120
051-39121
MP39780
051-39781
X X X
MP41030
051-41031
MP39200
051-39201
MP39830
051-39831
MP41040
051-41040
MP39760
PUSH TO CHOKE
051-39761
X X
MP41000
051-41001
MP41070-1
051-41070-2
178
HEX CHROME
HOUSING MATERIAL
HARDWARE INCLUDED
X X
Length 50"
LANYARD ONLY
ORDER NO. 424-20489
For more information see: www.sea-dog.com ULTIMATE LANYARD PWC Safety Lanyard
Be prepared, always carry a spare 4 keys to fit all Seadoo, Yamaha, Kawasaki, Honda, Polaris, Tiger Shark, and Wet Jet Includes stainless steel key ring, floating detachable wrist band, floating vest lanyard Mfr. No. UL-2 and high pitch pealess whistle ORDER NO. 737-16112 Red/Black
KEY FLOATS
Yellow. Holds up to five keys and stays afloat. A must for every boater. ORDER NO. 068-99890/ each
179
IGNITION SWITCHES
IGNITION SWITCHES
Sierra offers the most complete selection of high quality polyester and brass ignition switches for the Marine Industry. Marine grade glass-filled polyester switches Maximum corrosion protection eliminates oxidation Inner seal between cylinder lock and contact plate Non-conductive housing eliminates potential shorts 20 Amp rating 2, 3 and 4 position switches Switches for magneto and conventional ignitions Brass ignition switches Corrosion resistant construction Up to 15 Amp rating 2, 3 and 4 position switches Switches for magneto and conventional ignitions
Description: Material Length Terminal Type Back Up Nut Face Nut Hole Size Rated: Ignition Solenoid
Brass Long: 1-1/8" maximum panel thickness 3 Screw Tab Brass Hex Chrome Face Nut 7/8"
Description: Material Length Terminal Type Back Up Nut Face Nut Hole Size Rated: Ignition Solenoid
Polyester Long: 1-1/8" maximum panel thickness 3 Screw Tab Brass Hex black plastic face nut 7/8"
Description: Material Length Terminal Type Back Up Nut Face Nut Hole Size Rated: Ignition Solenoid
Polyester Short: 5/8" maximum panel thickness 3 Screw Tab Brass Hex black plastic face nut 7/8"
180
IGNITION SWITCHES
IGNITION SWITCHES
Mfr. No. MP39830 ORDER NO. 051-39831 Description: Material Polyester Length Long: 1-1/8" maximum panel thickness Terminal Type 6 Screw Tab Back Up Nut Brass Face Nut Hex black plastic face nut Hole Size 7/8" Rated: Ignition 15 Amp @ 12v DC Solenoid 30 Amp @ 12v DC Choke* 7 Amp @ 12v DC *Terminal to power separately controlled choke circuit
Mfr. No. MP41000 ORDER NO. 051-41001 PUSH TO CHOKE Description: Material Polyester Length Short: 5/8" maximum panel thickness Terminal Type 6 Screw Tab Back Up Nut Brass Face Nut Hex black plastic face nut Hole Size 7/8" Rated: Ignition Solenoid Choke
181
IGNITION SWITCHES
IGNITION SWITCHES FOR WORLD OUTBOARD MOTORS
Exact OEM Replacement installation Ideal for DFI, EFI and MPI engines Heavy duty potted construction Minimal bleed per circuit Molded umbrella type key
IGNITION SWITCH
Suzuki 2 & 4 Stroke Outboards Replaces: 37110-99E00 Colors on wires match factory color codes
IGNITION SWITCH
Yamaha Control Box 2 & 4 stroke Replaces: 703-82510-12-00 Colors on wires match factory color codes
051-51010 MP51010
051-51020 MP51020
IGNITION SWITCH
Yamaha Dash Mount 2 stroke Dual Engine Application Replaces: 61B-82510-01-00 Colors on wires match factory color codes
IGNITION SWITCH
Yamaha Control Box 2 & 4 stroke Push to Choke Replaces: 703-82510-43-00 Colors on wires match factory color codes
051-51030 MP51030
051-51040 MP51040
IGNITION SWITCH
Yamaha Dash Mount 2 & 4 stroke Dual Engine Application Push to Choke Replaces: 6K1-82510-06-00 Colors on wires match factory color codes ORDER NO. Mfr. No. 051-51050 MP51050
IGNITION SWITCH
3 Position Magneto - Off-Run-Start Push to Choke Replaces: Mercury 87-88107A5
051-52000 MP52000
IGNITION SWITCH
3 Position Magneto - Off-Run-Start Push to Choke Replaces: Mercury 87-17009A5
051-51090 MP51090
182
IGNITION SWITCHES/SWITCHES
THREE POSITION IGNITION SWITCH A: 13/16"
Brass
ORDER NO. 424-20350
Action Off-Ignition-Start
MAX PANEL: 1-1/8" SHAFT TYPE: Long TERMINAL TYPE / #: Screw-3 CAP: No
Action Off-Ignition-Start
A 13/16"
Cap No
Mfr. No.
424-20383
Cap No No No
Action
Cap Yes No
A 1"
B 3/8"
Amp 15 A
When pushed in all the way, the switch is turned off. When pulled to the first stop, the first circuit is activated. At the second stop both the first circuit and the second are activated.
A 1"
B 5/8"
183
SWITCHES/DISPLAYS
HORN BUTTON
Nylon/Phenolic & Chrome Plated Brass
ORDER NO. 424-20415/ ea. 424-20416/ ea.
A 5/16" 5/16"
B 1/2" 1/2"
Amps 15 A 15 A
Action Mom.On/Off
A Panel 5/8"
Terminal Boss-2
Cap Yes
Mfr. No. 420101-1 420102-1 420103-1 420104-1 420108-1 420121-1 420123-1 420109-1 420201-1 420204-1 420211-1 420213-1 420218-1 420251-1 420253-1 420390-1 420410-1 420415-1 420420-1 420427-1 420441-1 420465-1 420488-1 420489-1
Description Toggle Switch (SP) - On/Off Toggle Switch (SP) -Mom. On/Off Toggle Switch (DP) - On/Off/On Toggle Switch (DP) - Mom On/Off/Mom. On Toggle Switch (SPDT) - On/Off/On Toggle Switch (Light Tip) (SPST) On/Off Toggle Switch (Light Tip) (SPDT) On/Off/On Toggle Switch(SP) -Mom. On/Off/Mom. On Contura Switch (SP) - On/Off Contura Switch (SPDT)Mom. On/Off/Mom. On Contura Switch (Illuminating) SPST On/Off Contura Switch (SP) Illuminating - On/Off/On Contura Switch (DPDT) On/Off/On Rocker Switch (SP) Illuminate - On/Off Rocker Switch (DP) Illuminate - On/Off/On Brass Two Position Switch - On/Off Brass Three Position Switch (One Circuit) Horn Button (Miniature) Red Brass Push Button Switch Switch with Cap (Push Button) Mom. On/Off Rocker Switch (Illuminating) SPST On/Off Brass Toggle Switch - On/Off Kill Switch - Universal Lanyard for 420488-1
Mfr. No. 420350-1 420360-1 420361-1 420365-1 420366-1 420379-1 420382-1 420383-1 420427-1 420488-1 420489-1
Description Brass 3 Position -Off -Ignition Start Poly 3 Position - Off-Ignition-Start Poly 3 Position - Off-Ignition-Start Poly 3 Position - Off-Ignition-Start Poly 3 Position - Off-Ignition-Start Poly 4 Position Acc-Off -Ignition Start Poly 3 Position (Magneto)Off-Ignition-Start (Choke) Poly 3 Position (Magneto)Off-Ignition-Start (Choke) Poly Push Button Switch Universal Kill Switch Replacement Lanyard for Kill Switch
184
FUSES
ORDER NO.
Mfr. No.
Type
Amps
Qty in Display 3 3 3 3 3 3 3 3 3 3 3 3
444101-1 444102-1 444103-1 444104-1 444103-1 444157-1 444110-1 444115-1 444120-1 444125-1 444130-1 444135-1
AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
444190-1
AGC
1/4"
1-1/4" 3
AGC Style Mixed Fuse Kit contains 3, 5, 7.5, 10, 15 and 20 amp fuses, 5 each MINI BLADE STYLE MIXED FUSE KIT
424-45090
445090-1
7/16" 5/8"
3/16"
5/16" 3
Mini Blade Style Mixed Fuse Kit contains 3, 5, 7.5, 10, 15 and 20 amp fuses, 5 each AUTOMOTIVE STYLE FUSE
424-45105 424-45110 424-45115 424-45120 424-45125 424-45130 424-45140
5 5 5 5 5 5 5
3 3 3 3 3 3 3
AUTOMOTIVE STYLE FUSES
445190-1
ATO/ATC
3/4"
3/4"
3/16"
9/16" 3
C
ATO/ATC Style Mixed Fuse Kit contains 3, 5, 7, 10, 15 and 20 amp fuses, 5 each INLINE FUSE
424-20500 420500-1 FUSE HOLDER with Screw on Cap
3 3 3 3 3 3 3
B C
B
AGC STYLE MIXED FUSE KIT
420554-1
445199-1
444310-1
444190-1
185
FUSES/FUSE BLOCKS
AGC FUSES
1/4 x 1-1/4 Glass Tube Fuses Sold as a pack of 5
ORDER NO. Mfr. No. 051-79090 051-79110 051-79120 051-79140 051-79160 051-79170 051-79180 051-79190 051-79200 051-79210
SFE FUSES
Glass Tube Fuses Sold as pack of 5 RATING 1 Amp 2 Amp 3 Amp 5 Amp 7.5 Amp 10 Amp 15 Amp 20 Amp 25 Amp 30 Amp
ORDER NO. 051-79250 051-79260 051-79270 051-79280 051-79290
FS79090 FS79110 FS79120 FS79140 FS79160 FS79170 FS79180 FS79190 FS79200 FS79210
SIZE 1/4 x 7/8 1/4 x 7/8 1/4 x 1 1/4 x 1-1/4 1/4 x 1-7/16
AGA FUSES
1/4 x 5/8 Glass Tube Fuses Sold as pack of 5
ORDER NO. Mfr. No. 051-79060
AGU FUSES
13/32 x 1-1/2 Glass Tube Fuses Sold as pack of 2
ORDER NO. Mfr. No. 051-79870
RATING
FUSE BLOCKS
Heavy duty black molded plastic base. Use with SFE or AGC fuses to 20 amps. Brass fuse clips and 8-32 terminal screws.
ORDER NO. 051-405101 051-405201
Heavy duty black molded plastic base. Use with SFE or AGC fuses up to 20 amps. Brass fuse clip and 8-32 terminal screws. A common bus bar connects the hot side of the fuses for power feed. Bus bar has 8-32 stud terminal for main power connection.
ORDER NO. 051-40590-1 051-406001
These Patented ATO/ATC style fuse blocks allow you to design your own panel. Interlocking modules in various sizes snap together to create any configuration needed. With ground bus bar.
ORDER NO. 051-40421 051-40431 051-40741
Description 6 - Gang Fuse Block 4 - Gang Fuse Block 10 - Gang Fuse Block
186
AGC FUSES
OrderNo. 426-01010 426-01015 426-01020 426-01025 426-01030 426-01040 426-01050 426-01075 426-01080 426-01100 426-01150 426-01200 426-01250 426-01300 426-01112 426-01113
MDL FUSES
Design AMPS 1.0 1.5 2 2.5 3 4 5 7.5 8 10 15 20 25 30 5-30 1-30
OrderNo. 426-02030 426-02075 426-02100
Qty/Pkg 2 2 2
MDL FUSES
ATO/ATC FUSES
OrderNo. 426-04005 426-04010 426-04015 426-04020
Qty/Pkg 2 2 2 2
Design AMPS 5 10 15 20
ATO/ATC fuses
426-01112 (kit)
Fuse Dimensions Style Dia. Length AGC 1/4 1 - 1/4 MDL 1/4 1 - 1/4 ATC 13/16 3/4
FUSE HOLDERS
OrderNo. 426-07010 426-07011 426-07013 426-07016 426-07017
Description Panel Mount Replacement Panel Mount Fuse Holder Cap for 607010 Waterproof In-Line (12-18 AWG Wire) Heavy Duty In-Line w/ 12AWG Wire In-Line w/12 AWG Wire
Design AMPS 15
30 30 30
426-07013
426-07016
426-07017
187
FUSE HOLDERS
UNIVERSAL FUSE HOLDER 14 GA. w/ 15 amp Fuse ORDER NO. 051-69100 14 GA. w/ 20 amp Fuse ORDER NO. 051-69110
FUSE HOLDER
Weather Resistant 5" 8 GA Wire Leads Uses 30-50 Amp AGC Fuses (Not Included) ORDER NO. 051-69140
WATER RESISTANT FUSE HOLDER WITH SPARE FUSE COMPARTMENT ORDER NO. DESCRIPTION
051-69150 051-69160 051-69170 051-69180
10 GA. w/2 - 30 amp fuses 12 GA. w/2 - 20 amp fuses 14 GA. w/2 - 15 amp fuses 16 GA. w/2 - 10 amp fuses
INLINE FUSE
Injection Molded Nylon Wire Length: 11-1/2"/side (14 GA) Fuse Size: 1/4" x 1-1/4" Includes 20 amp fuse Mfr. No. 420500-1
FUSE HOLDERS
INLINE ATO FUSE HOLDER
Standard Open Blade 14 ga to 20 Amp Mfr. No. 509605-001 ORDER NO. 509-60500
QUICKHEAT GUNS
BUTANE MINI TORCH
ELECTRICAL TAPE-BLACK
3/4" x 66 ft. Black PVC UL & CSA listed Flame retardant & cold resistant Mfr. No. 507101-010 ORDER NO. 051-56502
188
Self starting with safety lock Can be used for soldering and welding Temperature 2372F (1300C) Can be used with Fusion connectors Burning time is 60-70 minutes Refillable Butane not included Mfr. No. 4280-001 For more information see: www.quickcable.com ORDER NO. 062-42800-1
Accepts 12-18 AWG wire 30A Maximum fuse amperage Fuse sold separately
ORDER NO. 738-50600 Mfr. No. 5060
738-50600
738-50620
Accepts 12-18 AWG wire 30A Maximum fuse amperage Fuse sold separately
ORDER NO. 738-50630 Mfr. No. 5063
Accepts 12-AWG wire 30A Maximum fuse amperage Fuse sold separately
ORDER NO. 738-50640 Mfr. No. 5064
738-50640
Accepts 12-AWG wire 30A Maximum fuse amperage Fuse sold separately
ORDER NO. 738-50650 Mfr. No. 5065
738-50650
AGC FUSES
Fast-acting glass fuse ideal for small electronic devices Features: For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC fuse holders AGC fuses are typically used in DC systems up to 32V DC AGC fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC Visible indication of blown condition AGC Five per retail package ORDER NO. 738-52040 738-52060 738-52080 738-52100 738-52110 738-52120 Mfr. No. 5204 5206 5208 5210 5211 5212 Amps 1A 2A 3A 5A 6A 7A
ATO/ATC FUSES
Delivers fast-acting protection for electronics and other small loads Features: Fast-acting type fuses ideal for electronic devices Standard circuit protection device for automobiles and trucks Tin-plated connector blades for corrosion resistance Visible indication of blown condition Sold in packages of 2 ORDER NO. 738-52350 738-52360 738-52370 738-52390 738-52410 738-52420 Mfr. No. 5235 5236 5237 5239 5241 5242 Amps 1A 2A 3A 5A 10A 15A
189
FUSE ACCESSORIES/BREAKERS
ROUND FUSE HOLDER WITH FLUSH CAP - SPADE TERMINAL
Stamped Brass/Molded Bakelite
A 3/8"
B 1/2"
Volts 12 V
Amps 15 A
Use with Order No. 424-45105 thru 424-45140. Max 30 Amps, 32 Volt, Uses 14 GA red wire.
Terminals 4 6
A 3" 4-1/2"
B 3-5/16" 3-5/16"
Amps 10 10
A 7/8" 7/8"
B 11/16" 11/16"
Amps 20 30 40 50
Volts 12 or 24 12 or 24 12 or 24 12 or 24
Amps 10 20
A 3/16 3/16
B 7/16 7/16
Mfr. No.
Amps 5A
A 1-1/8
B 7/16
UL Listing A-0701
190
Replacements for the very popular panel mounted breakers used everywhere in the industry. Top quality and a wide range of amp ratings for most applications make these a must have. Every boat owner should keep a spare (or two!). Two 1/4 blade terminals. Mounts in 3/8 hole. White reset button.
ORDER NO. 051-41200 051-41210 051-41220 051-41230
DC (White)
AC (Black)
TERMINAL BLOCKS
Barrier Type Junction Blocks Each screw pair is 1 isolated circuit Closed back insulates power from mounting circuit Nickle plated brass bus bar
ORDER NO. 051-45631 051-45641
Overall Size: 4.36"L x 1.312"W x 0.812"H 8 Gang Block, 16 - 10-32 Screw Terminals Overall Size: 5.33"L x 1.312"W x 0.812"H
191
CIRCUIT BREAKERS
PUSH BUTTON THERMAL CIRCUIT BREAKER
Ideal for 24-hour circuit protection Quick connect terminal style circuit breakers are incorporated into Blue Sea Systems Waterproof Circuit Breaker Panels and Battery Bank Main Distribution Panels Push-to-reset operation Trip Free design cannot be held ON during fault current condition Ignition protected - Safe for installation aboard gasoline powered boats Optional Push Button Waterproof Boot protects circuit breaker in wet environments Order Nos. 738-41350 (Clear) and 738-41370 (Black)
Mfr. No.
Amperage
PANEL MOUNT
Order No. 738-70350 738-70360 738-70370 738-70380 738-70390 738-70400 738-70410 738-70420 738-70430 738-70440 738-70450 738-70460 738-70470 738-70480
Mfr. No. 7035 Amperage 25A
SURFACE MOUNT
Order No. 738-71350 738-71360 738-71370 738-71380 738-71390 738-71400 738-71410 738-71420 738-71430 738-71440 738-71450 738-71460 738-71470 738-71480
Mfr. No. 7135 Amperage 25A
Regulatory Marked Meets SAE J1171 external ignition protection requirements IP66 - Withstands water from high seas
7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048
30A 35A 40A 50A 60A 70A 80A 90A 100A 110A 120A 135A 150A
7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148
30A 35A 40A 50A 60A 70A 80A 90A 100A 110A 120A 135A 150A
192
MAGNETIC SINGLE POLE AC CIRCUIT BREAKERS UL 489A, UL 1077 RECOGNIZED, VDE CERTIFIED, CE MARKED, TVU CERTIFIED
Order No. Design Amps 425-51505 5 425-51705 5 10 425-51510 425-51710 10 425-51515 15 425-51715 15 425-51520 20 425-51720 20 425-51525 25 425-51725 25 425-51530 30 425-51730 30 425-51540 40 425-51740 40 425-51550 50 425-51750 50 Toggle Colour Black White Black White Black White Black White Black White Black White Black White Black White Qty/Pkg 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
MOUNTING SCREWS
Nylon (6-32 x 5/16") Used in mounting breakers to electrical control panels. Qty/Pkg: 102 Order No.425-53041
DISPLAYS
193
SWITCHES/SWITCH PANELS
REMOTE CONTROL CONTURA SWITCHES
738-21550
738-21450
738-71870
Provides remote switching of ML-Series, SD-Series, and SafetyHub 250 Features: Vibration, shock, thermoshock, moisture and salt spray resistant Regulatory Meets UL 1500 and ISO 8846 external ignition protection requirements IP67-Protected against immersion up to 1 meter for 30 minutes ORDER NO. 738-21550 738-21450 738-21460 ( ) = Momentary Mfr. No. 2155 2145 2146 Pole/Throw SPDT SPDT SPDT Action On-On (On)-OFF-(On) On-OFF-On Used with SafetyHub 250 Fuse Block, SD-Series Solenoid Switches ML-Series Solenoids, ML-Series Remote Battery Switches ML-Series ACRs, SD-Series ACRs
738-11470
738-11480
ORDER NO.
Mfr. No.
738-11470 738-11480
1147 1148
2 3
194
Four 1A30A
Regulatory Marked Meets ISO 8846 ignition protection, and SAE J1171 external ignition protection requirements IP66 protected against powerful water jets ORDER NO. 738-77250 Mfr. No. 7725 Description SafetyHub 100 Fuse Block
738-77250
738-77270
738-77480
195
Includes ML-Series Remote Control Contura Switch 2145 Manual control switch provides an added level of safety allowing control with or without
power, and offering "Locked Off" capability for servicing
500 Ampere continuous rating for engine, inverter, house loads, and emergency battery
combine Bi-Stable Magnetic latching draws no current in "ON" or "OFF" state, only draws current when changing state of switch Silver alloy contacts provides high reliability for switching live loads 3/8" -16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/8" (22mm) stud length accepts multiple cable terminals Label recesses for circuit identification Regulatory: Marked Meets ISO 8846 MARINE and SAE J1171 MARINE external ignition protection requirements Waterproof rated IP66protected against powerful water jets
738-77000
738-77020
Features:
The fuse system recommended by most inverter manufacturers for high speed response to short circuits For use on systems up to 160 Volts DC Clear insulating cover satifies ABYC/USCG insulation requirements and protects conductive components Cover breakouts allow wire access in any direction Insert molded studs ensure secure fuse mounting Stainless steel studs provide resistance to corrosion and high torque for excellent electrical contact Terminal Stud Size: 3/816 (M10) accept ring terminals for wire up to 4/0 AWG Large heat dissipating tin-plated copper mounting blocks UL 94-V0 base resists high heat Mounting Holes: Accepts 1/4 screws Replacement Class T Fuses: 738-51180250A, 738-5119300A, 738-51210400A
Note: Model 5502 replaces Model 5002 ORDER NO. 738-55020 Mfr. No. 5502
196
5123 5124 5125 5127 5128 5129 5131 5133 5135 5136 5137
60A 80A 100A 150A 175A 200A 250A 300A 350A 400A 500A
738-51220
738-51010
Mfr. No.
Amperage
5003
35-750A
5005
35-300A
197
CLASS-T FUSES
Use with Class T Fuse Blocks for circuit protection of devices including inverters and selected Contura Waterproof Panels Features: Regulatory: Voltage Maximum Operating - 160 Volts DC UL listed to standard 248-15 Recommended by most inverter manufacturers DC tested to UL standard 198L Order No. 738-51190 738-51210 738-51180 Mfr. No. 5119 5121 5118 Amperage 300A 400A 250A
MAXI FUSES
Economical Tin-plated connector blades for corrosion resistance Visible indication of blown condition Sold in packages of 2
Specifications:
Maximum Voltage: 58 Volts DC Maximum Amperage: 300 Amperes DC Fuses Available: 30-300 Amperes DC
198
BUS BARS
MINIBUS 100 AMPERE COMMON BUSBAR
100 Amps AC/DC continuous rating Maximum voltage 300V AC, 48V DC Tin-plated copper bus Great for limited space applications
Marked
Mfr. No. 2304 Description 5 x 8-32 Screw Terminal
738-27010
Marked
738-27020
738-23020
Marked
738-23030
Description 10 x 8-32 Screw Terminal 10 x 8-32 Screw Terminal with cover 20 x 8-32 Screw Terminal with cover 4 x 1/4 Stud Terminal Cover for 738-23010 and 738-23030
738-23010
Marked
199
738-23140
738-40160
738-10120
738-40050
200
1810
1811
PANEL ACCESSORIES
DC PANEL BASIC (8030)
Accessory Anchor Light Autopilot Bilge Pump Blower Compass Light Depth Sounder Electronics Engine Instruments Fan Foredeck Light FWD Cabin Lights GPS Horn Knotmeter Lights Macerator Pump Main Cabin Lights Radar Refrigerator Running Lights Sailing Instruments Spare Spreader Lights Steaming Light Stereo Strobe Light Tricolor Light VHF Water Pressure
201
WATERPROOF DC PANELS
WEATHERDECK WATERPROOF CIRCUIT BREAKER PANELS
Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Available in 4 and 6 circuit models Each panel can be mounted in four different orientations ORDER NO. 738-43740 738-43760 738-43780 Mfr. No. 4374 4376 4378 Colour Grey Grey Grey Description 4 Position 6 Position 8 Position
Model No.4304 4 Position -Grey ORDER NO. 738-43060 Model No.4306 6 Position - Grey ORDER NO. 738-43040
202
738-80680 - Includes Blue Sea Systems PN 8028 AC Analog Micro Voltmeter - Includes Blue Sea Systems PN 8041 AC Analog Micro Ammeter
738-72020
738-72380
MDL Fuse
203
Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification Fuse blocks with covers include 20 write-on circuit labels Tin-plated copper buses and fuse clips Accepts ring or spade type terminals Accepts ATO and ATC fast acting blade fuses Fuses sold separately Order No. 738-50280 738-50250 738-50260
Mfr. No. 5028 5025 5026 Description 6 Circuit 6 Circuit with Negative Bus 12 Circuit with Negative Bus
738-80290
738-80320
Description 2 Sources
204
738-83690
Voltage 120V
Amperage 65
Positions 2 + OFF
Poles 4
Embedded LEDs 0 0 2 2
PANEL SWITCHES
Perfect for generator starters, bilge pumps, horns, wipers, engine controls and any other application that requires switching action other than ON-OFF or different pole configuration separate from circuit protection Panel switches mount in Blue Sea Systems A-Series Toggle Circuit Breaker panels Supplied with mounting adapter for standard 5/8 circuit breaker mounting hole Nickel-plated brass and phenolic non-corrosive construction
738-82000
738-82040/82070
( ) = momentary
205
PANEL ACCESSORIES/METERS
LED INDICATOR LIGHTS
Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights
Fits all A Series single pole toggle circuit breakers Fits all panel switches Can be used on any brand of circuit breaker panel (not including 360 Panel System) using standard toggle type circuit breakers Uses circuit breaker mounting screw holes (#6 Head Screw) Includes 2 mounting screws ORDER NO. 738-41000 Mfr. No. 4100
DC ANALOG VOLTMETERS
Simple 2-wire connection Meter senses powers from same connection 2-3/4" Face, 8-16 Volts DC
DC ANALOG AMMETERS
Simple 2-wire connection - no other power required Internal Shunt 2-3/4" Face, 0-25 Amperes DC
Description Shunt Type Ammeter 0-25A DC Internal Ammeter 0-100A DC + Shunt External
738-80050
206
ELECTRICAL PRODUCTS
BEP Marine is internationally recognized as a leading manufacturer of high quality marine electrical products. A major supplier to boat builders around the world, BEP Marine products are designed and manufactured to the highest standards. As an ISO 9000 2001 certified manufacturer, BEP guarantees consistent quality on every product produced. BEP Marines waterproof and splash proof switch panels are constructed of high impact, UV stabilized plastic. All switches are circuit protected via 15A rated ATC fuses. Each panel comes with labels and mounting screws.
901V 8-Position 2 x 5A 2 x 10A 3 x 15A 1 x 20A 8"H x 5"W x 2.5"D ORDER NO. 770-09010 901H 8-Position 2 x 5A 2 x 10A 3 x 15A 1 x 20A 4.5"H x 9.75"W x 2.5"D ORDER NO. 770-09011
901H
GAS DETECTORS
Gas Detector Features: Self testing capability Microprocessor control Provision for an external alarm Provision for bilge blower Dual sensor capability Stylish detector will detect LPG, Petrol and CNG fumes. Includes one sensor with 15 ft. lead. 600-GD ORDER NO. 770-06000 Same as 600-GD but has the ability to switch a valve on. The unit has a unique Pulse & Hold circuit. This allows the valve to be pulled in at 12V then steps down the voltage to hold the valve in place at 250mA. This reduces power consumption and heat build up. 600-GDL ORDER NO. 770-06001
SOLENOID VALVE/REGULATOR
This solenoid valve and regulator is compatible with the 600-GDL and is suitable for either 12 or 24V. Gas outlet is 1/4 BSP and gas inlet is POL thread. Regulator flow rate is 3kPA. VR2-2 ORDER NO. 770-00221
207
ELECTRICAL ACCESSORIES
738-25060
Mfr. No.
2502 2504 2506 2508 2510 2512
Circuit
2 4 6 8 10 12
738-20110
Description 1/4 x 3/4 Stud 5/16 x 7/8 Stud 3/8 x 7/8 Stud
738-21030
ROTATING CABLECAPS
Top rotates 360 to allow cable entry from any angle For batteries with integral marine wing nut posts Fits all cable sizes Sold as a pack containing 1 Black and 1 Red Order No. 738-40010
Mfr. No. 4001
208
ELECTRICAL ACCESSORIES
CABLECAP STUD INSULATORS
Insulated stud type connectors on alternators, starters, windlasses and other high amperage devices Order No. 738-40080 738-40090 738-40100 738-40110 738-40120 738-40130 738-40140 738-40150 Mfr. No. 4008 4009 4010 4011 4012 4013 4014 4015 Cable Size (AWG) 18-10 18-10 8-4 8-4 2-2/0 2-2/0 3/0-4/0 3/0-4/0 Colour Red Black Red Black Red Black Red Black Qty/Pack 3 3 2 2 1 1 1 1
738-40080
CABLECLAMS
Perfect for antenna installation Waterproof co-axial installation without removing and replacing connectors Order No. 738-10010 738-10020 738-10030 Mfr. No. 1001 1002 1003 Connector Opening in"(mm) 0.68" (17.27mm) 0.83" (20.95mm) 1.39" (35.18mm)
738-10010
738-10030
738-10020
WIRE COVER
Injection Molded ABS Wire cover designed to cover holes up to 1-1/4" in diameter. Accepts wire up to 3/16" in diameter. Sold as a pair. Order No. Mfr. No. 424-26090 (pr) 426090-1 A 2" B 1-1/2" C 1-9/16" D 5/16" E 3/16"
209
Description 6-Gang Horz. Panel Replace. Sq. Fuse Holder Replace. Rocker Switch
Mfr. No. PIN A B 426142-1 2 1-7/16" 15/16" As a safety feature, polarized pins are sized to be connected in only one way.
ORDER NO. 424-26142
Mfr. No. PIN A B 426162-1 2 1-1/4" 1-3/16" As a safety feature, polarized pins are sized to be connected in only one way.
Mfr. No. PIN 426262-1 2 426264-1 4 As a safety feature, polarized pins are sized to be connected in only one way.
210
A 6
The Battery Clip Adapter allows the use of 12 volt power accessories on small boats without a built in power socket.
Socket Material Stainless Steel Socket & Molded Cap Ideal for additional power outlets
A B 1-11/16 1-1/8
Fastener #8 RH
E D
C B
A 2-1/4 2-1/4
B C
A B C D E 1-7/16 n/a n/a 1-1/16 1-9/16 1-7/16 3-3/16 13/16 1-7/8 1-9/16
Add power easily almost anywhere. Drill a 1-1/8 hole, insert the socket body and tighten down the locking nut. Connect the wires and you are done. Plug includes LED light to indicate when powered. 12 volts, 16 amps. Includes a 3 amp fuse.
Colour Blue
A 4-1/8
211
12 VOLT ACCESSORIES
SEALINK DELUXE 12 VOLT RECEPTACLE & PLUG
The SEALINK 12 volt receptacle and plug is a totally new design. Both are manufactured from corrosion resistant marine grade materials. Exclusive to SEALINK products is a unique interconnecting system that securely locks the plug into the receptacle resulting in a positive and moisture proof connection. Both the plug and receptacle feature optimized metal connection points for maximum conductivity. 12VRC SEALINK 12 VOLT RECEPTACLE
Watertight Sealing Cap Easy to install, use supplied mounting plate for front panel installation, or locking ring for rear access installation
ORDER NO. 055-00122
CONNECTPRO PLUG
O-ring seal for waterproof connections Weather resistant plug cover Corrosion resistant, plated brass electrical components Accepts 16 to 8 gauge wire Ergonomic contoured grip for easy hook-up and blade alignment ORDER NO. 055-00127
CONNECTPRO RECEPTACLE
Universal design for 2- or 3-wire configuration; 12, 24, 12/24, 24/36 or 36 volt systems Watertight sealing cap Corrosion resistant, plated brass electrical components Drain holes in receptacle keep water away from electrical components Perma-Lock screw terminals will not loosen under extreme hull vibration Standard 1-1/8" diameter mounting hole
12VCP
Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation Accepts 10 and 8 gauge wire Easily replaces other trolling motor plugs and receptacles (No special tools needed)
ORDER NO. 055-00126
212
12 VOLT ACCESSORIES
TROLLING/CHARGING SYSTEM
The 4-wire Trolling/Charging System eliminates the need for a charge/run switch. Install the receptacle on the boat, mount the black trolling motor plug on the trolling motor, and the red charger plug on the leads of the battery charger. Simply plug in the black plug to troll, or plug in the red plug to charge.
RECEPTACLE
Glass-reinforced corrosion reistant nylon. Accepts 8 gauge stranded wire or up to 6 gauge with ring terminals. Black.
RECEPTACLE BRACKET
Spring loaded flip lid cover Without receptacle
213
10 AWG WIRE
Order No. Length 421-88003 8' 421-08010 100 421-08310 100' 421-88803 8' 421-08810 100' 421-88903 8' 421-08910 100' 421-09010 100' Color Black Black Green Red Red White White Yellow
16 AWG WIRE
Order No. Length 421-82003 25' 421-02010 100' 421-02050 500' 421-02110 100' 421-02210 100' 421-82303 25' 421-02310 100' 421-02410 100' 421-02610 100' 421-02710 100' 421-82803 25' 421-02810 100' 421-02850 500' 421-82903 25' 421-02910 100' 421-03010 100' 421-03050 500' Color Black Black Black Dk Blue Brown Green Green Grey Pink Purple Red Red Red White White Yellow Yellow
12 AWG WIRE
Order No. Length 421-06310 100' 421-06510 100' 421-06610 100' 421-06710 100' 421-86803 12' 421-06810 100' 421-06910 100' 421-07010 100' 421-86003 12' 421-06010 100' 421-06110 100' 421-06210 100' Color Green Orange Pink Purple Red Red White Yellow Black Black Dk Blue Brown
Wire Size 18 AWG .8 mm2 16 AWG 1 mm2 14 AWG 2 mm2 12 AWG 3 mm2 10 AWG 5 mm2
Nominal O.D. 7/64" 2.88 mm 1/8" 3.2 mm 9/64" 3.6 mm 5/32" 4 mm 7/32" 5.6 mm
Wt. per 1000 12 lbs. 5.4 kg 16 lbs. 7.3 kg 23 lbs. 10.4 kg 31 lbs. 14 kg 44 lbs. 20 kg
214
FLAT TRIPLEX
Order No. 421-30902 421-30910 421-31110 421-31310 421-31510 421-31710 Length Size
10/2
100'
14/2
8/3
RIBBON CABLE
Order No. 421-53110 421-54510
RIBBON CABLES
SPECIALTY CABLES
SPECIALTY CABLE
Order No. 421-54010 421-55010 421-22010 421-53010
215
ANCOR Marine Grade wire is manufactured from tinned copper stranding for
maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing.
ANCORs prprietary premium vinyl insulation stays flexible even in extreme cold and
resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105C dry and 75C wet, and is resistant to heat and abrasion.
Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards.
8 AWG CABLE
Order No. Length 421-11010 100' 421-11310 100' 421-11510 100' 421-11710 100' 421-11910 100' Color Black Green Red White Yellow
2 AWG CABLE
Order No. Length 421-14002 25' 421-14005 50' 421-14502 25' 421-14505 50' 421-14905 50' Color Black Black Red Red Yellow
6 AWG CABLE
Order No. Length 421-12010 100' 421-12510 100' Color Black Red
1 AWG CABLE
Order No. Length 421-15005 50' 421-15505 50' 421-15905 50' Color Black Red Yellow
4 AWG CABLE
Order No. Length 421-13002 25' 421-13005 50' 421-13502 25' 421-13505 50' Color Black Black Red Red
216
4 AWG
Black
4 AWG
Red
4 AWG
Yellow
MARINE GRADE BATTERY CABLE ASSEMBLIES FOR CONTINUOUS CURRENT USE BATTERY
Draws up to: 136 Amps 178 Amps Cable Assemblies 4 AWG 2 AWG
2 AWG
Black
2 AWG 2 AWG
Red Yellow
18 32 48 18 32 48 18 32 48 18 32 48 18 32 48 18 32
5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 3/8 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8
217
OPERATING TEMPERATURE
-20C to 105C, BC-5W2 (105C Dry, 75C Wet)
CONSTRUCTION
CONDUCTOR: Finely stranded Type III Tinned Copper INSULATION: Ultra Flexible Polyvinyl Chloride. Resists Acids, Abrasion, Alkali, Flame, Gasoline, Moisture, and Oil COLOUR: To Customer Specification
VOLTAGE RATING
600 Volts
STANDARDS
UL Standard 1426 BC-5W2 (Electric Cable for Boat) ABYC E-11, NMMA, USCG 33 CFR Part 183.430, 183.435, SAE J378, 1127, 1128
Mfr. No. 1426160101 1426160102 1426160201 1426160301 1426160401 1426160501 1426160601 1426160701 1426160801 1426160802 1426160901 1426161001 1426161201
Length 100' 250' 100' 100' 100' 100' 100' 100' 100' 250' 100' 100' 100'
6 AWG
Order No.
604-060150 604-060101 604-060301 604-060850 604-060801
14 AWG
Order No.
604-140101 604-140102 604-140201 604-140601 604-140801 604-140802 604-140901 604-141001
Mfr. No. 1426140101 1426140102 1426140201 1426140601 1426140801 1426140802 1426140901 1426141001
4 AWG
Order No.
604-040150 604-040850
2 AWG
Order No.
604-020150 604-020850
12 AWG
Order No.
604-120101 604-120102 604-120301 604-120801 604-120802 604-120901 604-121001
1 AWG
Order No.
604-010150 604-010850
10 AWG
Order No.
604-100101 604-100301 604-100801 604-101001
218
Description 10/2 UL Boat Cable Duplex Flat100' 12/2 UL Boat Cable Duplex Flat100' 14/2 UL Boat Cable Duplex Flat100' 16/2 UL Boat Cable Duplex Flat100'
Red & Yellow Insulation Order No. Mfr. No. 604-214081 214081001 604-216081 216081001
Description 14/2 UL Boat Cable Duplex Flat100' 16/2 UL Boat Cable Duplex Flat100'
TRIPLEX
Order No. 604-14010 14/2 AWG Mfr. No. TSC1401 Ultra flexible PVC jacket Tinned copper conductor Clear jacket 250 strands per conductor for maximum flexibility (14 gauge)
Order No. 604-81449 604-81450 604-81453 604-81454 604-81457 604-81458 604-81461 604-81462 604-81465 604-81466 604-81469 604-81470 604-81473 604-81474
Diameter 1/8"
Length (inch) Qty/Pkg 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Material: Features: Co-extrusion of polyolefin and hot-melt adhesive Provide both insulation and sealing Protect bundles of wires and metal tubes against water and moisture Flexible and thick adhesive lined to bond with plastics, rubber and metals Temperature: Operating temp: -45C ~125C Shrinking Temp: Starts at 70C, and shrunk totally at 125C.
3/16" 81454 81457 1/4" 81458 81461 3/8" 81462 81465 1/2" 81466 81469 3/4" 81470 81473 1" 81474 Red Red Black Red Black Red Black Red Black Red Black
219
Mfr. No. Wire Size 81198 81202 81206 22-18 AWG 16-14 AWG 12-10 AWG
Qty/Pkg 25 25 25
Mfr. No. Wire Size 81222 81226 81230 81234 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG
Qty/Pkg 25 25 25 25
Mfr. No. Wire Size 81769 81106 81773 81118 81781 81134 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG
Qty/Pkg 25 25 25 25 25 25
Stud SizeWire Size 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG
Qty/Pkg 25 25 25 25
Female
604-81885
Specification Stud SizeWire Size Female Disconnect 22-18 AWG 0.250 Tab Male Disconnect 22-18 AWG 0.250 Tab Female Disconnect 16-14 AWG 0.250 Tab Male Disconnect 16-14 AWG 0.250 Tab
Qty/Pkg 25 25 25 25
220
Mfr. No. Wire Size 81210 81214 81218 22-18 AWG 16-14 AWG 12-10 AWG
Qty/Pkg 25 25 25
Qty/Pkg 25 25
Mfr. No. Wire Size 81646 81650 81654 81658 20-18 AWG 20-18 AWG 16-14 AWG 16-14 AWG
Qty/Pkg 25 25 25 25
Mfr. No. Wire Size 81150 81154 81162 81166 81178 81182 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG
Qty/Pkg 25 25 25 25 25 25
Specification Male Disconnect Female Disconnect Male Disconnect Female Disconnect Male Disconnect Female Disconnect
Wire Size 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG
Qty/Pkg 25 25 25 25 25 25
221
RING TERMINALS
Nylon Insulated with Insulation Grip (Funnel Entry) Order No.
422-30202 422-20202 422-30203 422-20203 422-30212 422-20212 422-30213 422-20213 422-30215 422-20215 422-30216 422-30222 422-30223 422-30224 422-30225 422-20225 422-30226 422-20226 422-30233 422-30235 422-30236
DISCONNECTS
Wire Size 22-18 22-18 22-18 22-18 16-14 16-14 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 12-10 12-10 8 ga. 8 ga. 8 ga. Screw #8 #8 #10 #10 #8 #8 #10 #10 5/16" 5/16" 3/8" #8 #10 1/4" 5/16" 5/16" 3/8" 3/8" #10 5/16" 3/8" (.250 /6.4 mm Tab Size) Nylon Insulated with Insulation Grip Order No. Qty/Pkg 422-30818 5 422-20818 100 422-30819 5 422-20819 100 422-30828 4 422-20828 100 422-30829 4 Wire Size 16-14 16-14 16-14 16-14 12-10 12-10 12-10 Gender Female Female Male Male Female Female Male
FLANGED SPADES
Nylon Insulated with Insulation Grip (Funnel Entry) Order No. Qty/Pkg Wire Size 422-30312 6 16-14 422-30313 6 16-14 422-30323 5 12-10 Screw Size #8 #10 #10
BUTT CONNECTORS
Nylon Insulated Seamless (Single Crimp) Order No. Qty/Pkg 422-30100 7 422-20100 100 422-30110 7 422-20110 100 422-30120 5 422-20120 100 Wire Size 22-18 22-18 16-14 16-14 12-10 12-10
BUTT CONNECTORS
Vinyl Insulated UL 486C
222
Screw Size
#8 #10 #8 #8 #10 #10 5/16" 5/16" 3/8" 3/8 #8 #10 #10 1/4 5/16" 5/16" 3/8" 3/8"
257 PIECE HEAT SHRINK CONNECTOR KIT WITH CRIMPER & MINI TORCH
110 Asst 22-10 Butt Connectors. 145 Assorted 16-10 Ring Terminals. 1 Single Crimp Ratchet Tool. 1 Mini Butane Pocket Torch.
3
25 3 3 25 3 25
Qty/Pkg
3 25 3 25 3 25 10
Wire Size
22-18 22-18 16-14 16-14 12-10 12-10 22-10 Assorted
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 F/125 C. Operating temperature range of -40 C to 110 C. Shrink tubing is UL. ADHESIVE LINED TUBING Specifications (3:1 Ratio) Size Size Wire Range (In.) Shrinks to (AWG)
1/8 3/16 1/4 3/8 1/2 3/4 1/32" 1/16" 5/64" 1/8" 5/32" 1/4" <18 20 - 12 16 - 10 12 - 8 8-4 6 - 2/0
Qty/Pkg Diameter
3 1 3 1 3 1 3 1 5 1 3 1 3 1 4 1 1/1 8 1/8" 1/8" 3/16" 3/16" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/16-3/4" Kit
Length
3" 48" 3" 48" 3" 48" 3" 48" 3" 48" 3" 48" 3" 48" 3" 48" 3 3"
Color
Black Black Black Black Black Black Black Black Bl/Gr/Rd/Wht/Ylw Red Black Black Black Black Bl/Gr/Rd/Wht/Ylw Red Black/Red Black
Length
3" 3
Color
Black/Red Black/Red
423-26202 423-27202
223
Wire Gauge
22-18 22.18 22-18 16-14 16-14 16-14 12-10 12-10 12-10
Colour
Red Red Red Blue Blue Blue Yellow Yellow Yellow
25 Pack
ORDER NUMBER 051-04032 051-04042 051-04682 051-04132 051-04142 051-04202 051-04242 051-04252 051-04302
100 Pack
ORDER NUMBER 051-04034 051-04044 051-04684 051-04134 051-04144 051-04204 051-04244 051-04254 051-04304
RING TERMINALS
SPADE TERMINALS
Wire Gauge
22-18 22-18 16-14 16-14 12-10 12-10
Colour
Red Red Blue Blue Yellow Yellow
25 Pack
ORDER NUMBER 051-04092 051-04102 051-04212 051-04222 051-04702 051-04272
100 Pack
ORDER NUMBER 051-04094 051-04104 051-04214 051-04224 051-04704 051-04274 .250 QUICK DISCONNECTS
Wire Gauge
22-18 22-18 16-14 16-14 12-10 12-10
Colour
Red Red Blue Blue Yellow Yellow
25 Pack
ORDER NUMBER 051-04052 051-04062 051-04152 051-04162 051-04282 051-04292
100 Pack
ORDER NUMBER 051-04054 051-04064 051-04154 051-04164 051-04284 051-04294 BUTT CONNECTORS
BUTT CONNECTORS
Wire Gauge
22-18 16-14 12-10
Colour
Red Blue Yellow
25 Pack
ORDER NUMBER 051-04002 051-04112 051-04232
100 Pack
ORDER NUMBER 051-04004 051-04114 051-04234
Wire Gauge
22-18 16-14 12-10
Colour
Red Blue Yellow
25 Pack
ORDER NUMBER 051-59852 051-59862 051-59872
100 Pack
ORDER NUMBER 051-59854 051-59864 051-59874
224
Premium quality for heavy duty applications or for use in abusive environments requiring protection from abrasion Inner surface lined with adhesive sealant which melts when heated: Permanently seals connection as tube cools & shrinks Conforms to DOD Mil-DTL-23053/15A Class 1 & 2 specifications
MAGNATUBE
MAGNATUBE
Expanded Diameter X Length. 1-1/8 x 1.5 Shrunk Diameter 3/8 Use with 1/0-250MCM Black
ORDER NUMBER 062-56150-1 (10/pk)
Natural
ORDER NUMBER 062-56150-2 (10/pk)
Natural
ORDER NUMBER 504-62110 504-62210 504-62310 504-62410 504-62510 504-64110 504-64210 504-64310
Natural
ORDER NUMBER 502-15010
225
SPECIALITY CONNECTORS
MULTI-STACK CONNECTOR Qty/Pkg Wire Size 3 16-14 25 16-14
DOUBLE MALE-FEMALE ADAPTER Order No. Qty/Pkg Wire Size 422-30613 5 .250 422-10613 25 .250 SPLICE CONNECTOR Qty/Pkg Wire Size 4 18-14 SNAP PLUGS Qty/Pkg Wire Size 4 16-14 25 16-14 4 16-14 25 16-14
226
227
Qty/Pkg 25 25 25 100 25 25 25 25
Qty/Pkg 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Dia. 3/16" 1/4" 5/16" 3/8" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/2" 3"
Colour UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black UV Black
GROMMETS
Provide instant abrasion resistance to wires passing through panel holes. Flexible black vinyl makes installation simple.
Order No. 427-60375 427-60500
SPIRAL WRAP
Permits flexible routing of cable harnesses. Provides abrasion protection for wire and cable. Allows lead outs at any point for greatest ease of installation.Temp Rated: 40F to 170F. Black is ABYC REG fire retardant.
Order No. 424-52381 424-52385 424-52501 424-52505 424-52751 424-52755
Qty/Pkg 5 5
Qty/Pkg 45
228
ELECTRICAL TOOLS
COASTAL ELECTRICAL KIT
Order No. 422-20007 1 Spool 100 Pcs. 20 Pcs. 2 Pcs. 30 Pcs. 15 Pcs. 10 Pcs. 15 Pcs. 4 Ea. 5 Ea. 1 Ea. 2 Ea. 1 Ea. 1 Ea. 1 Coil #16 & #12 Black, Red UL 1426 Boat Cable 22 - 18 12 - 10 Various Connectors 22 - 18 12 - 10 Heat Shrink Butt Connectors 1/4" & 3/8" Black Heat Shrink Tubing 8" & 11" 75lb. Natural and UV Black Cable Tie 1/4" & 3/8" Natural Clamps Trade #90, 1004, 1142, 211-2 & 10806 Bulbs 10, 15 & 20 Amp AGC Fuse Marine Grade Tools #8 Screw Adjustable Clamp AGC In-Line & Waterproof Fuse Holder Adhesive Backed Cable Tie Mount ATC Fuse Asst. Pack Emergency Clamp On Terminal 15' 16/2 Duplex UL 1426 Boat Cable
424-27290
229
BATTERY CLIPS
Stamped Copper Plated Steel
A 3"
B 2-1/8"
C 1/4"
D Amps 9/16" 10 A
230
BATTERY ACCESSORIES
BATTERY BOX STRAP AND BRACKETS
Woven Polyproplene
A 38" 54"
B 1-9/16" 1-9/16"
C 1" 1"
D 2-5/16" 2-5/16"
Injection Molded in Kraton. Satisfies U.S. Coast Guard requirements and American Boat and Yacht Council recommendations for prevention of accidental grounding of battery terminals. Will fit most marine batteries as well as automotive batteries using add on marine terminals
ORDER NO. 424-15100
A 1/2"
B 1-5/8"
C 1-11/16"
D 2-7/8"
A 2-5/16"
B 9/16"
C 5/16"
D 5/16"
231
BATTERY BOXES
BATTERY BOXES
ll battery boxes meet ABYC standard E-10 and U.S. Coast Guard Specification Number 183,420 as an OEM-installed battery hold-down system. Polypropylene construction for total acid resistance. Hold-down straps resist 350 pounds of force, nearly four times the USCG requirement. Battery Boxes are drop tested in temperatures ranging from -20F to +120F. Hold-Down strap and mounting hardware included. Black, vented battery boxes 4 cable openings. Enlarged to .55 diameter Larger handles with rolled edges Instructions molded inside cover Hardware includes four #8, 3/4 screws and two footman clamps Straps are woven polypropylene with firm grip buckle and completely resistant to battery acid. Mfr. No. For Battery Series
ORDER NO.
109-90650 9065-1 24/24M 109-90671 9067-1 27/27F/27M *Dimensions with Lid Installed
080-07262
615-42215
BATTERY TRAYS
Non-corrosive hi-strength plastic construction Self-locking security knobs Easy to install Fits new style battery dimensions! ORDER NO. Mfr. No. For Battery/Description 615-42215 07260 24 Series / 12.75"L x 7.50"W x 9.50"H (Holds batteries up to 10.25"L x 6.75"W x 8.12"H) 615-09621 09621 27 Series / 14.38"L x 7.50"W x 11.25"H (Holds batteries up to 11.75"L x 6.75"W x 7.75"H) 615-42216 07261 29 - 31 Series / 15.38"L x 8.00"W x 12.00"H (Holds batteries up to 13.00"L x 7.43"W x 10.00"H)
232
120-17401
Single box holds One 6-volt battery Dual box holds Two 6-volt battery
Box Color Inside Dimensions Outside Dimensions Black 10-3/4"L x 7-1/4"W x 12-1/4"H 13-1/2"L x 9-1/4"W x 13"H Black 15"L x 11"W x 13"H 20"L x 14-1/2"W x 14-1/2"H Side by Side
120-17501
Battery Size
24 Series
Fastener
1/4" RH
BATTERY TRAY
Injection Molded Polypropylene
Order No. 424-15054
Mfr. No.
415054-1
Battery Size
24 Series
Fastener
1/4" RH
BATTERY HOLDERS
DetMar Quick Disconnect Battery Holders DETMARS rod-type holders offer the unmatched holding power of a metal hold down rod to stainless steel base clip connection. Molded side loops keep rods in raised position for easy installation. Quick disconnect nuts permit easy installation and removal of batteries using special high-strength non-corrosive nylon wing nuts which can be tightened by hand. Nuts cannot be overtorqued and will not loosen or vibrate free. All battery holders come complete with mounting hardware. Order No. Mfr. No. Description Base Dimensions For Battery Series 101-01558 10-15-58S Small Battery Holder 11" x 7" x 1-3/16" 24/24M 101-01560 10-15-60S Large Battery Holder 12-7/8" x 7" x 1-3/16" 27/27M/31 Replacement Parts
101-21005
12-1004
233
BLOWERS
TURBO IN-LINE BLOWERS
atented in-line design provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design includes: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Up to 25% higher airflow Up to 40% fewer amps NMMA Certified IMCI (CE) Certified Attwood's new and improved Turbo 4000 sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation and prevents blade to housing interference. Description
ORDER NO. Mfr. No. For 3" I.D. Ventilation Hose 101-17310 1731-4 101-17330 1733-4 For 4" I.D. Ventilation Hose 101-17470 1747-4 101-17490 1749-4
For more information see: www.rule-industries.com 3" AND 4" IN-LINE BLOWERS
IN-LINE BLOWERS
DETMAR blowers are reliable, efficient and have the highest capacity on the market. DETMAR raised the performance standards for in-line blowers by pioneering design features like its five-blade, bullet nosed impeller and cambered stator vanes. DETMAR blowers meet or exceed the following standards: UL 1128 ABYC H-2 NMMA Certified U.S.C.G. 33 CFR sections 183.410, 183.425 and 183.610 IMCI Certified in accordance with ISO 9097 ORDER NO. 107-07540 107-07510 107-07580 Mfr. No. 7-5-4C 7-5-1C 7-5-8C
107-07510
12 Volt High capacity at low amp draw Quiet, highly efficient & reliable operation High quality ABS plastic construction Installs easily with mounting feet & slide-on hose connection ABYC H-2 NMMA Certified U.S.C.G. 33 CFR Sections 183.410, 183.425 & 183.610
LISTED Description 3 In-Line Blower (3 intake, 3 exhaust) 4 In-Line Blower (4 intake, 4 exhaust) 4 intake, 3 exhaust In-Line Blower
107-07540
CFM 100
234
LED BULBS
LED BULBS
Heavy-duty glass envelope for break resistance Nickel-plated brass bases prevent corrosion while ensuring a positive point-of-contact Filaments, with a rough service design, permit hours of reliable burning Not for use in Navigation fixturesHeavy-duty glass envelope for break resistance Nickel-plated brass bases prevent corrosion while ensuring a positive point-of-contact Filaments, with a rough service design, permit hours of reliable burning Not for use in Navigation fixtures.
425-29417
425-429412
235
ORDER NO. 425-20194 425-20906 425-20053 425-20057 425-21895 425-21816 425-21416 424-41004 425-20068 425-20090 425-20094 425-21076 425-21140 425-21142 425-21176 425-21003 425-20097 425-21141 425-20093 425-21034 425-21157
Trade No. 194 906 53 57 1895 1816 1416 1004 68 90 94 1076 1142R 1142 1176 1003 97 1141 93 1034 1157
CP 2.00 6.00 1.00 2.00 2.00 3.00 8.00 15.00 4.00 6.00 15.00 32.00 21.00 21.00 21/6 15.00 4.00 21.00 15.00 32/3
Life 1500 1000 1000 500 1500 1000 1000 200 5000 750 700 200 1000 1000 300/1500 200 5000 500 700 200/5000 1200/5000
Qty/Pkg 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
236
Qty/ Pkg 1 2 2 2 2 2
Trade No.
Pkg 2 2 2 O
211-2 212-2
CP 11.00 5.00
Qty/ Pkg 1 1
Description D C Bayonet
Qty Pkg. 1
Halogen Lamp Adapter Installation Tips 1. Turn off power. 2. Use wire loop to turn adapter into socket to prevent breakage. 3. Remove wire loop. 4. Wipe clean Halogen Lamp (Do not touch lamp with fingers) and install it into adapter.
The nickel-plated brass base Halogen Lamp Adapter allows the use of all AE and AF style miniature halogen lamps in standard single contact, double contact or medium screw base sockets.
237
BULBS/LAMPS
SINGLE CONTACT BAYONET BASE LIGHT BULB - Nickel Plated Brass Base
ORDER NO. 424-41003 pr. 424-41067 pr. 424-41093 pr. 424-41141 pr. 424-41156 pr.
Mfr. No.
441003-1 441067-1 441093-1 441141-1 441156-1
Trade#
1003 67 93 1141 1156
A
1-5/8" 1-3/8" 1-7/8" 1-15/16" 1-15/16"
B
3/4" 3/4" 1" 1" 1"
Design Amps
.94 A .59 A 1.04 A 1.44 A 2.1 A
Design Volts
12.8 V 13.5 V 12.8 V 12.8 V 12.8 V
Design Watts
12.0 W 8.0 W 13.3 W 18.4 W 26.9 W
Candle Power
15 4 15 21 32
DOUBLE CONTACT BAYONET BASE LIGHT BULB - Nickel Plated Brass Base
ORDER NO. Mfr. No. 424-41004 pr. 441004-1 424-41032 pr. 441032-1 424-41034 pr. **441034-1 424-41076 pr. 441076-1 424-41082 pr. 441082-1 424-41090 pr. 441090-1 424-41094 pr. 441094-1 424-41142 pr. 441142-1 424-41143 pr. *441143-1 424-41157 pr. **441157-1 *Bulbs Have Red Lenses
Trade#
1004 1034 1076 82 90 94
A
1-3/4" 1-3/8" 1-15/16" 1-7/8" 1-3/8" 1-3/8" 1-7/8" 1-7/8" 1-7/8" 1-15/16"
B
3/4" 3/4" 1" 1" 3/4" 3/4" 1" 1" 1" 1"
Design Amps
.94 A .25 A 1.8/.59 A 1.80 A 1.02 A .58 A 1.04 A 1.44 A 1.44 A 2.1/.59 A
Design Volts
12.8 V 12.0 V 12.8/14 V 12.8 V 6.5 V 13.0 V 12.8 V 12.8 V 12.8 V 12.8/14 V
Design Watts
Candle Power
1157
12.0 W 15 5.0 W 4.5 23.04/8.26 W 32/3 23.0 W 32 6.6 W 6 7.5 W 6 13.3 W 15 18.4 W 21 18.4 W 21 26.88/8.26 W 32/3
A B
Mfr. No.
441053-1 441057-1 441895-1
Trade#
53 57 1895
A
15/16" 1-1/16" 1-1/16"
B
7/16" 9/16" 9/16"
Design Amps
.12 A .24 A .27 A
Design Volts
14.4 V 14.0 V 14.0 V
Design Watts
1.7 W 3.4 W 3.8 W
Candle Power
1 2 2
Mfr. No.
441027-1
Trade#
E27
A
2-1/2"
B
1-9/16"
Design Amps
1.25 A
Design Volts
12 V
Design Watts
15 W
Candle Power
N/A
Trade# 70 71
211-2 212-2
Candle Power 12 6 6 2 12 6
PERKO BULBS/LAMPS
ORDER NO. 621-00692 621-00702 621-07012 621-00712 621-07212 621-07022 621-37011 621-37012 621-03381 621-03382
69 DP CLR, 70 DP0 CLR, 70 DP1 CLR, 71 DP CLR, 72 DP1 CLR, 70 DP2 CLR.
Mfr. No. 69 DP CLR 70 DP0 CLR 70 DP1 CLR 71 DP CLR 72 DP1 CLR 70 DP2 CLR 337 011 DP 337 012 DP 338 DP1 CLR 338 DP2 CLR
Voltage 12 12 12 12 24 32 12 12 12 12
Nominal Wattage 10 10 15 10 10 13 7 11 5 9
238
Amps .83 .74 .97 .80 .40 .40 .58 .94 .35 .69
BULBS/LAMPS
WEDGE LIGHT BULB
Mfr. No. 424-41194 pr. 441194-1 424-41906 pr. 441906-1
ORDER NO.
A 1" 1-3/8"
B 3/8" 9/16"
Design Volts 14 V 13 V
Candle Power 2 6
Trade#
A 1-5/16"
B 1-3/8"
Design Volts 12 V
Design Watts 10 W
MR-11 style Halogen bulb is used in Mfr. No. 400550, 400555, 400557
Trade#
A 1-3/4"
B 2"
Design Volts 12 V
Design Watts 10 W
MR-16 style Halogen bulb is used in Mfr. No. 400540, 400545, 400565
Trade# 891
A 1-1/4"
B 5/16"
Design Volts 12 V
Design Watts 20 W
A 1-1/16" 1-1/16"
B 7/16" 7/16"
Design Amps .5 A .5 A
239
LED LIGHTING
Luxor LEDs EDs use as little as 2 20% 0% % of the batt battery ery y power p required q d for conventional onventional i l lighting.
Conventional al pow battery batt ery power wer required compared mpared to LuxOr LED D powered lighting ghting for the same e lighting load. d. Conventional Lighting
A Luxor G-4 bulbs are 1 All 10-30 0-3 30 volt DC and NON-polarity ty Sensitive G4 B BASE ASE - BACK BAC K P PIN IN
O RDE R N O. ORDER NO.
MFR. M FR. NO. LIGHT LIG HT COLOUR COLOU UR SPECIFICATIONS SPECIFICATIONS REPLACES* REPLACES*
REPLACES* REPLACES*
95-115lm 95-1 15lm m 1 20-130 120-130 1.6W 1.6W W 2 8mm m 28mm 9mm m
REPLACES* REPLACES*
SPECIFICATIONS SPECIFICATIONS
REPLACES* REPLACES*
95-115lm 95-1 15lm m 120-130 1 20-130 1.6W 1.6W W 28mm 2 8mm m 9mm m
REPLACES* REPLACES*
240
LED LIGHTING
G4 BASE - PREMIUM (Draws half the power of a standard LED-G4S-12 for the same amount of light)
ORDER NO.
MFR. NO. LIGHT COLOUR SPECIFICATIONS REPLACES*
240-41000-1 240-41000-2
LED-G4-1W-CREE-WW LED-G4-1W-CREE-PW
FESTOON BASE
ORDER NO.
12 volt DC
MFR. NO.
Polarity Sensitive
LIGHT COLOUR SPECIFICATIONS REPLACES*
ORDER NO.
MFR. NO.
LIGHT COLOUR
SPECIFICATIONS
REPLACES*
MFR. NO.
LIGHT COLOUR
SPECIFICATIONS
REPLACES*
MFR. NO.
LIGHT COLOUR
REPLACES*
240-39300-1 240-39300-2
LED-FEST-39-3HP-WW LED-FEST-39-3HP-PW
ORDER NO.
MFR. NO.
LIGHT COLOUR
SPECIFICATIONS
REPLACES*
240-39600-1 240-39600-2
LED-FEST-39-6HP-WW LED-FEST-39-6HP-PW
ORDER NO.
MFR. NO.
LIGHT COLOUR
SPECIFICATIONS
REPLACES*
240-16300-1 240-16300-2
LED-MR16-3-WW LED-MR16-3-PW
Lumens: 230lm View Angle: 60 Watts: 3.0W Length: 51mm Diameter: 50mm 12v DC NON-polarity Sensitive
Q20MR16
241
LED LIGHTING
BAYONET BASE
NON-polarity Sensitive
BA15S/BA15D Parallel Pin BAY15D Indexed Pin Single Intensity
REPLACES*
240-15600-1 240-15610-1
LED-BA15S-6-WW LED-BA15D-6-WW
LED-BA15S-6-WW (Parallel):
ORDER NO.
MFR. NO.
LIGHT COLOUR
REPLACES*
Warm White Pure White Blue Warm White Pure White Blue
MFR. NO.
LIGHT COLOUR
SPECIFICATIONS
REPLACES*
240-15300-1 240-15310-1
LED-BA15S-3HP-WW LED-BA15D-3HP-WW
LED-BA15S-3HP-WW (Parallel):
ORDER NO.
MFR. NO.
LIGHT COLOUR
REPLACES*
240-15800-1 240-15810-1
LED-BA15S-8-WW LED-BA15D-8-WW
LED-BA15S-8-WW (Parallel):
1141
ORDER NO.
MFR. NO.
LIGHT COLOUR
REPLACES*
240-15130-1 240-15131-1
LED-BA15S-13-WW LED-BA15D-13-WW
LED-BA15S-13-WW (Parallel):
1003
ORDER NO.
MFR. NO.
LIGHT COLOUR
REPLACES*
240-15180-1 240-15181-1
LED-BA15S-18-WW LED-BA15D-18-WW
LED-BA15S-18-WW (Parallel):
ORDER NO.
MFR. NO.
LIGHT COLOUR
REPLACES*
240-15270-1 240-15271-1
LED-BA15S-27-WW LED-BA15D-27-WW
LED-BA15S-27-WW (Parallel):
ORDER NO.
MFR. NO.
LIGHT COLOUR
REPLACES*
240-26150
SA-E26-BA15D
E26 screw in lamp socket to convert to double contact bayonet base socket.
SOCKET ADAPTER CONVERTS E26 SCREW-IN LAMP TO LED BAYONET BASE LAMP
242
LED LIGHTING
T-10 T -10 BASE BASE
ORDER O RDE R N NO. O.
MFR. M FR. NO. LIG LIGHT HT C COLOUR OLOUR S SPECIFICATIONS PECIFICATIONS R REPLACES* EPLACES*
Lumens: 70-75lm 70-75lm Vie w Angle: 360 View 360 1.0W W atts: 1.0W Watts: 28.5mm Length: L ength: 28.5mm 11.5mm Diameter: 11.5mm 12v 1 2v DC Polarity Polarity Sensitive
SPECIFICATIONS T S S PECIFICATION
147, 152, 147, 58, 1459, 84, 192, 152, 1 158, 1459, 161, 161, 168, 168, 1 184, 192, 193, 1 93, 194, 59, 280, 55, 259, 555, 194, 2 280, 285, 285, 447, 447, 464, 5 558, 5 58, 585, 585, 655, 655, 656, 656, 657, 657, 1250, 1250, 1251, 1251, 1252, 1 252, 2 450, 2 652, 2921, 825 2450, 2652, 2825 2921, 2
REPLACES* R EPLACES*
25-30lm Lumens: 25-30lm View 360 Vie w Angle: 360 Watts: W atts: 0.4-0.5W W 22mm Length: L ength: 2 2mm 11.5mm Diameter: 11.5mm 12v 12v DC Polarity Polarity Sensitive
SPECIFICATIONS T S S PECIFICATION
147, 152, 147, 152, 158, 158, 1459, 1459, 161, 161, 168, 168, 184, 184, 192, 192, 193, 259, 555, 1 93, 194, 194, 2 59, 280, 280, 285, 285, 447, 447, 464, 5 55, 5 58, 585, 5, 656, 558, 585, 65 656, 657, 657, 1250, 1250, 1251, 1251, 655, 1 252, 2450, 2450, 2 652, 2921, 2921, 2 825 1252, 2652, 2825
REPLACES* R EPLACES*
Lumens: 1 120-140lm 20-140lm m 120-130 View Vie w Angle: 1 20-130 0 901, 90 1, 904, 906, 908, 909, 9 12, 914, 912, 914, Watts: W atts: 2 0W 2.0W W 9 15, 5 916, 916, 6 917, 917, 7 918, 918, 8 920, 920, 0 921, 921, 92 2 2, 915, 922, Length: 31.5mm L ength: 3 1.5mm m 92 3, 926, 7, 928, 923, 926, 92 928, 939 939 927, 11.0mm Diameter: 1 1.0mm m 12-30v NON-polarity Sensitive 1 2-30v DC NON-polarit yS ensitive s
WATERPROOF W ATE RPROOF TRAILER TRAI LE R LI LIGHT G HT R REPLACEMENT E PLAC E M E NT B BULB U LB (I (IP63 P63 3R RATED) ATED)
ORDER O RDE R N NO. O.
MFR. M FR. NO. LIG LIGHT HT C COLOUR OLOUR S SPECIFICATIONS PECIFICATIONS R REPLACES* EPLACES*
Pure White
Lumens: 2 70lm 270lm Vie w Angle: 3 60 View 360 W atts: 3.5W Watts: Over all L ength: 7 0mm Overall Length: 70mm Diameter: 2 5mm 25mm V olts 1 0-30DC Volts 10-30DC
Automotive circuitr circuitry, y, dual intensity. intensity. 1 1157 157 Replacement Double Contact Base BA AY1 Y 5D BAY15D Automotive T Tail ail Light. This light is specially cially designed to offer an I P63 wet loc ation r ating IP63 location rating which hich tail lights are subjected to. Other er colours are available: warm white, amber ber and red. Suitable for damp or wet environments. ments.
Volts: V olts: LEDs: LE Ds: View Vie w Angle: g W atts: Watts: L ength: Length:
Flexible, I IP65 P65 r rated, ated, indoor, encased encased in a exible low epoxy resin. Thin diameter, extremely lo w prole. Ready to connect to 1 2 volt DC power power source. ource. 12 Intensity, High Intensit y, Superior Lumen Output. 2-metre roll Cut to the perfect leng length th at 4 inter vals 7.2 7.2 Watt Watt / Meter . intervals Meter.
S SPECIFICATIONS PECIFICATIONS
R REPLACES* EPLACES*
240-60000-2
RGB M RGB Multifunction ultifunction Controller Controller with with IR IR r remote emote u up p t o 10 10 m etres. Choose Choose l ight p attern, speed speed and and to metres. light pattern, b rightness of of 20 20 colours colours (RGB). (RGB). Indoor Indoor o nly (IP20). (IP20). brightness only
FLEXIBLE F LEXI BLE WATERPROOF WATE RPROOF STRIP STRI P LIGHTING LIG HTI NG
ORDER O RDE R N NO. O.
MFR. M FR. NO. LIG LIGHT HT C COLOUR OLOU UR S SPECIFICATIONS PECIFICATIONS R REPLACES* EPLACES*
Blue RG B RGB
Volts: Volts: LEDs: LE Ds: View Vie w Angle: Watts: W atts: Length: L ength:
Flexible, I IP67 P67 rated, rated, outdoor, encased encased in n UV resistant clear silicone jacket. Easy-install ll clips, low lo w prole. 2-metre roll can can be cut length to leng th at 4 intervals intervals w/ end cap. 12v c ap. Connect to 1 2v DC power power source. High Intensit Intensity, y, Superior Lumen Output. 7 .2 Watt Watt / Meter. Meter. 7.2
243
LED LIGHTING
UNDER-CABINET LIGHT STRIPS RIGID R IG I D U N DE R- CABI N ET LI G HT S TRI PS
ORDER O RDE R N O. NO.
MFR. M FR. NO. LIGHT LIG HT COLOUR COLOU UR SPECIFICATIONS SPECIFICATIONS REPLACES* REPLACES*
Volts: Volts: Lumens: View Vie w Angle: Watts: W atts: Length: L ength: Width:
12 D 12 DC 234/ft 234/ /ft 120 1 20 0 4.3W/ft /ft 12/18/ 12/18 / 14.5mm 14.5mm m
Perfect for indoor accent or conned area Perfect rea lighting. Quiet, Quiet, icker-free, aluminum heat eat sink body stays cool. Easy-install snap-in clips, ps, low low prole. Warm Warm a White or Cool White. LE D lasts over 40,000 LED hours. Sealed metal housing, sealed optics. Includes switch.
Lumens (White): 5 500lm 00lm Lumens (Blue) 60lm View Angle: 120 View 120 Watts: Watts: 6W Length: Length: mm 119mm Diameter: 119mm
SPECIFICATIONS SPECIFICATIONS
10 to 13.5 10 13.5 Volt Volt DC F Fused used Input with 5ft Waterproof W aterproof Cable 40,000 Hour Bulb Life P erfect for Soft Under water Ambiance ce Perfect Underwater 120 Viewing 1 20 Degree Vie wing Angle
REPLACES* REPLACES*
240-63000-4
LED-RUWL-6-3-RGB LE D-RUWL-6-3-RG B
RGB RG GB Volts: Volts: W atts: Watts: LE Ds: LEDs: 8-28 8-28 DC 3x6 6
Includes LE LED D Controller. Controller. LED-RCCD Requires LE D -RCCD Remote Control Colour ur Driver (below) (belo w) to control and drive colors.
Red, Green & Blue Colours 8-28 Volt Fused 8-2 8V olt DC F used Input w/ 5ft Waterproof Waterproof oof Cable 316 IP68 Rugged 3 16 Marine Grade Grade Stainless Steel I P68 Waterproof CE W aterproof p Rating, g, C E and RoHs Approved pproved ed LED Driver. Complete with LE D Driver . 40,000 Hour Bulb Life This C This Colour olour D Driver river is is supplied supplied w with ith a small small Remote Remote Controller to xtures conveniently. Each C ontroller t o operate operate xtures c onveniently. E ach LED-RCCD up to four RGB L ED -RCCD unit unit can can drive drive u pt of our R GB xtures. xtures.
240-60000-1
LED-RCCD LE D-RCCD
SPECIFICATIONS SPECIFICATIONS
REPLACES* REPLACES*
240-63000-1 240-63000-3
Lumens (White): Lumens (Blue): Vie View w Angle: W atts: Watts: L ength: Length: Width:
10 to 30 10 30 V DC F Fused used Input w/ 5 Waterproof W aterproof Cable Power Constant Current P ower Regulator Supplied Cree brand S upplied with Cr ree br rand LEDs LE E Ds 40,000 Hour Bulb Life 30 3 0 Degree Emitting Angle
10 to 1 10 13.5 3.5 V Volt olt DC F Fused used Input w/ 5ft W aterproof Cable Waterproof Rugged 3 16 Marine Gr ade Stainless Steel I P68 316 Grade IP68 W aterproof Rating, C E and RoHs Approved ed Waterproof CE 40,000 Hour Bulb Life
REPLACES* REPLACES*
240-29000-2 240-29000-3
10 to 1 10 13.5 3.5 V Volt olt DC F Fused used Input w/ 5ft W aterproof Cable Waterproof Rugged 3 16 Marine Grade Grade Stainless Steel I P68 316 IP68 W aterproof Rating, C E and RoHs Approved ed Waterproof CE 40,000 Hour Bulb Life
REPLACES* REPLACES*
SPECIFICATIONS SPECIFICATIONS
240-30000-2 240-30000-3
244
Replaces R eplaces y your our 1 1/2 /2 dr drain rain plug. Simply scre w into the 1 /2 threaded entr y and wire. screw 1/2 entry 28v brand LEDs, IP68 8 to 2 8v DC built-in driver. driver. Cree br and LE EDs, I P68 Waterproof CE W aterproof Rating, C E and RoHs Approved. ed.
Profile View
Front View
Mfr. No. 0174D3PLB** * In accordance with ANSI standards **Includes both bulbs For more information see: www.perko.com
Surface Mount
COURTESY LIGHT
For illuminating companion ways, cockpits, and other areas where low level light is needed. Convenient courtesy light is easily surface mounted. Transparent polycarbonate lens can be removed for lamp service or replacement. Includes one 3.8 watt automotive- type lamp. Dimensions: 3-7/16" L, x 1-13/16" H x 1-1/16" D Two holes for # 8 screws
Order No.106-63250
DOME LIGHT
Stamped 304 Stainless
Each dome light has a polished stainless steel housing and trim ring and a solid glass lens. Each light is prewired with an on/off switch. 12 Volt Includes 12 volt, 15 watt DC double contact bayonet bulb
Order No. 424-00190(Ea) Mfr. No. 400190-1 A 4" B 5-1/2" C 2" Fastener #4 RH
A 3-1/8"
B
1/2"
C 2"
WALL SWITCHES
Stainless/Brass
Order No. 424-03012 / ea. 424-03032 / ea.
A 2" 2-1/2"
B 2-1/2" 2-1/2"
C 1" 1"
No. of Switches 1 3
Fasteners #6 RH #6 RH
Mfr. No.
424-03055 / ea.403055-1
A 2-5/16"
B C 2-5/16" 9/16"
Fastener #8 RH
245
INTERIOR LIGHTS
INCANDESCENT INTERIOR CEILING DOME LIGHTS
12 Volt DC, 18W Built-in On/Off Rocker Switch Energy Draw: Single - 1.4A, Double - 2.8A UL Listed, Meets CSA Standards
Description Single Dome Light, 7.50"(L) x 4.30"(W) x 1.80"(H) Double Dome Light, 11"(L) x 4.30"(W) x 1.80"(H)
066-51107
12 Volt DC 5W Incandescent Lamp Energy Draw: 350 mA Built-In Push Lens for On/Off Position Can be recess mounted or surface mounted w/ optional bezel Flange Depth: .250" CE & e-Mark Approved Dimensions*: 5.50"(L) x 3.63"(W) x 1.20"(H)
*with surface mount bezel as pictured
12 Volt DC 6 LEDs Energy Draw: 60 mA Rated at 50,000 hours of Service Life Shock and Vibration Proof Built-In Push Lens for On/Off Position Can be recess mounted or surface mounted w/optional bezel Flange Depth: .250" Dimensions*: 5.50"(L) x 3.63"(W) x 1.20"(H)
*With surface mount bezel as pictured
Description White LED, Black Case White LED, White Case White LED, Chrome Case
8" Rectangle Fluorescent - Surface Mount 12 Volt DC, 7W Energy Draw: 190 mA 6,000 hours of Service Lamp Life Built-in On/Off Rocker Switch Non- Corrosive plastic base Non-Yellowing Acrylic Clear Lens Mounting hardware included ORDER NO. UL Listed Dimensions: 8"(L) x 3.50"(W) x 1.50"(H) 073-51007
10" Rectangle Fluorescent - Surface Mount 12 Volt DC, 13W 6,000 hours of Service Lamp Life Built-in On/Off Rocker Switch Non- Corrosive plastic base Non-Yellowing Acrylic Clear Lens Mounting hardware included UL Listed Dimensions: 10"(L) x 2.75"(W) x 1.60"(H) ORDER NO.
072-51007
3" Diameter - 4 LED - 12 Volt DC Includes Bezel, mounting hardware & 3 Trim Rings
- White, Chrome, & Gold
Energy Draw: 60 mA 50,000 hours of Service Life Can be recess mounted or surface
mounted w/ optional bezel
3" Diameter Silverlight - Surface Mount 12 Volt DC, 3 Watt Output Energy Draw: 200 mA 50,000 hours of Service Life Built-in On/Off Rocker Switch Sleek Low Profile Shock and Vibration Proof
Shown with Chrome Bezel
246
LED LIGHTS
CHANNELBRITE LED VERSA-BRYTE INTERIOR LIGHTING KIT
Operates 9-16 Volt DC Systems Consumes 90% Less Energy than Incandescent Rated 100,000 hours of Service Life Shock and Vibration Proof Low profile design Gives off little to no heat Attractive end caps give nice finished look Can be cut every 3 for a custom fit. Certified Ignition Protection Kit Includes: 2 End Caps 1 Light Strip 1 Mounting Rail 1 Power Cord 1 Connector Plug Mounting Screws
050-5112-7
Operates on 12 Volts DC Self-adhesive backing Current Draw @ 12.8 volts: Transparent plastic enclosure Draws 67 mA @ 12 volts 12 LEDs per strip Rated 50,000 hours of Service Life 2 pin connector Size: 11.81"(L) x 0.30"(W) x 0.11"(D) Operates on 12 Volts DC Current Draw: 116mA @ 12 volts 19 LEDs per strip Rated 50,000 hours of Service Life Surface Mount design Mount with screws or double-sided adhesive tape Plastic lens Plastic trim ring 8' 24 AGW wires with 2 pin plugs Size: 2.28" Diameter x .25"(D)
LED SURFACE MOUNT LIGHT
9-16 Volts DC Systems Rated at 100,000 hours of Service Life Shock & Vibration Proof Cool to the touch Dimensions: 2.60"(L) x 1.90"(W) x .66"(H)
Colour White
Operates on 12 Volts DC Current Draw: 92 mA @ 12 volts 18 LEDs Rated 50,000 hours of Service Life Surface mount design Mount with screws or double-sided adhesive tape Frosted plastic lens Stainless steel trim ring 8' 24 AGW wires with 2 pin plugs from connection box to LED lights Size: 2.05"(L) x 2.05"(W) x 0.25"(D) Built-in On/Off switch Velcro mounting strips Snap On/Off battery cover 3 AAA batteries required Super light-weight 3 White LEDs Cool to the touch
For more information see: www.perko.com
247
INTERIOR LIGHTS
BERTH LIGHT SMALL
Machined and Stamped Polished Brass
A B C D FINISH FASTENER MFR. NO. 3-5/8" 2-15/16" 4-1/4" 3-7/8" BRASS # 6 RH 400400-1
ORDER NO.
424-00400
ORDER NO.
424-00410
Prewired with on/off switch and 12 volt, 15 watt DC double contact bayonet bulb. Each Berth Light has a lacquer coated polished brass body with solid brass knurled adjusting knobs. Interior surface of lamp shade is white enamel.
CABIN LIGHT
Machined and Stamped Polished Brass
A B C FINISH FASTENER MFR. NO.
B C A
2-7/8" 3-7/8" 4-1/2" BRASS # 6 RH 400430-1
SWIVEL LIGHT
Machined and Stamped Polished Brass
C
B D A
ORDER NO.
424-00430
Cabin Light has a polished brass body with a white translucent shade. Traditional styling. Prewired with on/off switch and 12 volt 10 watt DC double contact bayonet bulb.
ORDER NO.
424-00420
Swivel Light has a polished brass body featuring a bell-shaped shade. Interior surface of lamp shade is white enamel. Prewired with on/off switch and 12 volt, 10 watt DC double contact bayonet bulb.
UTILITY LIGHT
Injection Molded Delrin
A B C D E FASTENER 2-1/4" 2-1/4" 1-1/2" 1-1/2" 13/16" # 6 FH
ORDER NO.
Mfr. No.
OR EQUIVALENT
ORDER NO.
424-05210
405210-3
Stainless steel housing with prewired 12 volt 35 watt sealed beam bulb.
248
INTERIOR LIGHTS
DOME LIGHTS - SURFACE MOUNT
DOME LIGHTS
Stamped 304 Stainless ORDER NO. Mfr. No. 424-00200 400200-1 A 5 (lens) B 6-3/4 C 2-1/8 Fastener #6 RH
Each Dome Light has a polished stainless steel housing, trim ring and solid glass lens. Prewired with on/off toggle switch and 12 volt 15 watt DC double contact bayonet bulb. Stamped Polished Brass ORDER NO. Mfr. No. 424-00195 400195-1
A 4 (lens)
B 5-1/2"
C 1-13/16
Fastener #4 RH
Each Dome Light has a lacquer coated polished brass body and trim ring and a solid glass lens. Prewired with on/off toggle switch and includes a double contact bayonet bulb 12V 15W DC.
Push Switch with Water Resistant Boot Complete With 12 Volt, 10 Watt Bulb. White Translucent Polymer Lens Chrome-Plated Zinc Alloy
Dimension Base: 3-5/8" x 4-1/4" Overall Depth: 1-1/4" / Screw Size: 8 R.H. Maximum Wattage: 10
O.D. Base: 3-3/4" / Overall Depth: 1-1/4" Screw Size: 8 R.H. Maximum Wattage: 10
Mfr. No.
ORDER NO. 621-12582 621-00702 621-24402 621-00701 Dome Light Spare Bulbs (2) Spare Lens Spare Switch 1260DP2CHR 0070DP0CLR 0245002WHT 0701DP
Mfr. No.
Dome Light Spare Bulbs (2) Spare Lens Spare Switch 1258DP2CHR 0070DP0CLR 0244002WHT 0701DP
Dual Voltage, For 12 and 120 Volts Double Contact Bayonet Sockets, Complete With Two 12 Volt and Two 120 Volt Bulbs. White Translucent Polymer Cover White PERKO-KOTE Cast Zinc Alloy Base with Integral Junction Box
Length: 9-3/4" / Width: 3-1/2" / Depth: 1-7/8" Screw Size: 10 Dual Voltage Surface Mount
Mfr. No.
Light 0318DP Spare 12v Bulbs (2) 0337012DP Spare 120v Bulbs (2) 0337023DP Spare Socket 0024DP1 Spare Globe 0318A0099D Spare Switches with 0318A0099E Square Buttons - (1 Each High & Low)
249
SPREADER LIGHT
Six (6) high-powered 1 watt LEDs Efficient LEDs provide 100,000 hour operation High (900-100 Lumens) light output Wide 150 light spread 12-28 Volt DC Low draw, less than 1/4 Amp UV and impact resistant White housing and polycarbonate lens Waterproof (non submersion) sealed housing
5H x 3.45W x 2.70D
Shock resistant LEDs Stainless steel mounting bracket with adjustable tilt
ORDER NO. 305-384500 Mfr. No. F38-4500WHA-1
SPOT LIGHT
Three (3) high-powered 3 watt LEDs Efficient LEDs provide 100,000 hour operation High 1,000,000 candlepower output 12-28 Volt DC Low draw, less than 1/2 Amp UV and impact resistant White housing and polycarbonate lens Waterproof (non submersion) sealed housing 5H x 3.45W x 3D Shock resistant LEDs Stainless steel mounting bracket with adjustable tilt
T-TOP LIGHT
108 LEDs provide 300 Lumens/white light, 150 Lumens/red light Switch from white light to red light for chart-reading 100,000 hours of operation Waterproof (non-submersible) Impact-resistant polycarbonate lens
ORDER NO. 305-382050 Mfr. No. F38-2050-1 Description LED T-Top Light
18' wiring cable to accommodate most tops & bridges Polished anodized aluminum housing pre-drilled for easy mounting Mounting clips included for easy installations 20"L x 2"dia.
108 LEDs provide 300 Lumens of bright white light, 150 Lumens of low glare red light Switch from white light to red light Ideal for use in engine rooms, on T-tops and arches for chart-reading Universal design for use as replacement light for existing standard T-Top light housing Impact-resistant polycarbonate lens Mounting clips included for easy installation Light tube & connection sealed for water resistance 20"L x 2" dia.
ORDER NO. 305-382060 Mfr. No. F38-2060-1 Description LED Tube/Replacement Light
High efficient 100,000 hours of operation Vibration & shock-resistant LEDs Impact-resistant & waterproof (non-submersion) Convenient & safe cordless operation
Rechargeable Ni-Mh battery Operates 3+ hours on a single charge Includes AC/DC charger & lighter adapter Hands free operation
60 LEDs provide 250 Peak Lumens of output Attractive & rugged blue sure-grip housing 25'W x 30'D light spread 17"L x 2"dia. Rechargeable Ni-Mh battery
ORDER NO. 305-382500 Mfr. No. F38-2500-1
Swivel stainless steel hook for hands-free operation Ideal for use in engine compartments, hatches, on T-tops, towers, and other outdoor applications Operates 3+ hours on single charge Includes AC/DC charger and light adapter
Description LED Rechargeable 17" Work Light, Blue w/ Stainless Steel Hook
60 LEDs provide 350 Lumens of light Offers 25'W x 25'D light spread compared with flashlight spread of 5'W x 15D Versatile mounting options for tube or flat mount Includes bimini-clips for thru-bolt and magnet mounting Ideal for use on Bimini tops, windshields, gunnels & tops, or in lockers & hatches 12" in length
For more information see: www.tacomarine.com
ORDER NO. 305-382012 Mfr. No. F38-2012-1 Description LED Rechargeable 12 Mini Bright Stick, Black
F38-2012-1
251
DOCKING LIGHTS/SPOTLIGHTS/ACCESSORIES
LUMA LED BLASTER -- SECURITY/FLOOD LIGHT
LUMATEQ Blasters are perfect lighting solutions where efficient, low-glare illumination is key. The Blaster Series is our brightest most compact state-of-the-art design in an Up-Light, Down-Light or Wall-Pack Features: Clean look blends seamlessly with architectural elements Indoor/Outdoor Crisp white, energy efficient light best for security cameras Significantly longer life leads to reduced maintenance costs Choice of mounting options to meet a variety of architectural applications Unit mounts as Wall Pack, Up Light, Down Light, and Ceiling Light Light weight compact design for easy installation Features: Durable aluminum water tight housing with 360/180stainless steel mounting bracket Powder coated satin finish Double O Ring Sealed Housing High impact polycarbonate lens ETL-Approved for Wet location UL Approved Includes stainless steel screws & mounting hardware
Watts 40 40 60
For more information see: www.lumateq.com LED DOCKING LIGHTS -- SURFACE MOUNT
Backed by a 10-year warranty, Attwoods LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. Easy, do-it-yourself installation with virtually no hull intrusion Three high intensity LEDs 5,000 plus candle power Safe to touch 1 hour on time = 120F max 120 wide beam Produces a bright output with minimal current draw Dimensions: 2.8"W x 4.5"L x 1.2"H No hole saw required (Only small hole for wiring and 3 screws for attachment required) ORDER NO. 106-65227 Stainless Steel Bezel, White LED Mfr. No. 6522SS7 ORDER NO. 106-65237 Mfr. No. 6523BK7 Black Powder Coat Bezel, White LED
Injection Molded Fiberglass Nylon w/ Stamped 304 Stainless Bracket This marine grade flood light has a solid glass lens, a stainless steel mounting bracket and a 12 Volt, 55 Watt halogen bulb. ORDER NO. 424-05110 (Ea) 424-05111 Mfr. No. 405110 405111-1 A B C 6-15/16" 5-5/16" 3-3/16" Replacement Bulb 55 W Halogen Volts 12V
252
Operates 9-16 volt DC systems Rated at 100,000 hours of service life Shock and vibration proof
ACCENT LIGHT SINGLE LED SURFACE MOUNT
ORDER NO. 001-40007 001-41007 001-50007 001-51007 ORDER NO. 004-20007 004-21007 004-40007 004-41007 004-50007 004-51007 ORDER NO. 003-20007 003-21007 003-40007 003-41007 003-50007 003-51007
Mfr. No. 001-4000-7 001-4100-7 001-5000-7 001-5100-7 Mfr. No. 004-2000-7 004-2100-7 004-4000-7 004-4100-7 004-5000-7 004-5100-7 Mfr. No. 003-2000-7 003-2100-7 003-4000-7 003-4100-7 003-5000-7 003-5100-7
LED Colour Red Red White White LED Colour Blue Blue Red Red White White LED Colour Blue Blue Red Red White White
Case Colour Black White Black White Case Colour Black White Black White Black White Case Colour Black White Black White Black White
1.71L x .65W x .57H Energy draw 30 milliamps Patent #D440,673 Operates 9-16 volt DC systems Shock and vibration proof
LED BULKHEAD/LIVEWELL RECESSED MOUNT LIGHT
1.25L x 1 OD x .687 ID Rated as 100,000 hours Requires 11/16 hole Cool to the touch
ORDER NO. 011-15007 011-35007 011-45007 011-55007 Mfr. No. 011-1500-7 011-3500-7 011-4500-7 011-5500-7 LED Colour Amber Green Red White # of LEDs 1 1 1 2
1.82L x 1.85 OD x 1.25 ID Includes rubber gasket and nut Fully potted electronics Requires 1.25 hole Rated for underwater use 3 LEDs
ORDER NO. 012-15007 012-25007 012-35007 012-45007 012-55007 Mfr. No. 012-1500-7 012-2500-7 012-3500-7 012-4500-7 012-5500-7
DOCKING LIGHTS
LED SURFACE MOUNT DOCKING LIGHTS
ORDER NO. 585-02007 (Sold in Pairs) Mfr. No. 585-0200-7
Smart Driver Technology that senses voltage fluctuations Operates 9-16 volt DC systems 50,000 hours of Service Life on LEDs Shock & Vibration Proof Corrosion Resistant, Sealed circuitry & waterproof 3 high powered LED front lights that illuminate over a 100 spread,
8 side lights that illuminate over a 120 spread. Total light spread is 160. The front & side lights operate independently of each other. Includes stainless steel mounting screws. Requires a 1/2" hole for easy installation
12 volt DC systems 50-watt halogen lamp Draws 4 amps each Sealed built-in rear heat sink Thermal insulated wires
ORDER NO. 580-00007 580-01007 580-02007 580-99041
Pyrex optical lens Spring loaded lamp assembly Removable lens cover Water-tight gaskets included Patent #D472,654
Description
Enamel Baked Black Gloss Finish Enamel Baked White Gloss Finish 316 Stainless Steel Replacement Halogen Bulb
Mfr. No.
580-0000-7 580-0100-7 580-0200-7 580-9904-1
253
SEARCHLIGHTS / SPOTLIGHTS
135 SL RC SEARCHLIGHT
A remote control searchlight, developed with the 20 to 50 ft (7-15 metre) powerboat in mind, with many benefits of existing units at a greatly reduced cost. Easily replaceable halogen sealed beam delivers 100,000 candle power. 1 Lux at 865 ft (262 metres). Supplied complete with joystick remote control. Optional secondary full control panel for dual helm stations. 320 horizontal rotation, 75 vertical sweep. All materials are non-corrosive. Complete with 15ft (4.5m) cable, with optional extension cables. 7" wide x 8-1/8" long x 7-7/8" high (18cm x 20.5cm x 20cm ). Size: Weight: 6 lb (2.7kg)
ORDER NO. Description 60020-0000 12 Volt DC, fuse 10 amp 18753-0178 Replacement sealed beam, 12/24 Volt DC, 100,000 cp
146 SL RC SEARCHLIGHT
A high performance searchlight for medium sized yachts, remotely controlled from helm station. Easily replaceable halogen sealed beam delivers 175,000 candle power. 1 Lux at 1275ft (386 metres). Supplied complete with water resistant joystick remote control. Tough, corrosion resistant Lexan housing. Full, 360 horizontal rotation, 60 vertical sweep. Optional secondary full control panel for dual helm stations. Complete with 15ft (4.5m) cable, with optional extension cables. Size: 8-1/2" wide x 10-1/8" long x 8-15/16" high (22cm x 26cm x 23cm ). Weight: 9 lb (4kg)
ORDER NO. Description 60080-0012 146SL 12 Volt DC, fuse 10 amp. 18753-0455 Replacement sealed beam, 12/24 Volt DC, 175,000 cp
155 SL RC SEARCHLIGHT
Our new leading light for style, performance and value. Sweeping curves complement the latest pleasurecraft profiles. Fingertip control of the watertight halogen sealed beam will pick out hazards nearly 900ft away. Just check out the value! Easily replaceable 5" (130mm) halogen sealed beam delivers 100,000 candlepower. 1 lux at 885 ft (268 metres). Full 320 horizontal rotation, 75 vertical sweep. Complete with joystick remote control (12 Volt DC model) Complete with 15ft (4.5m) cable, with optional extension cables. Tough thermoplastic housing and base. Optional secondary remote control panel for dual helm stations Size: 6-3/8" wide x 8" long x 8"high (16cm x 20cm x 20cm). Weight: 5 lb (2.3kg) Secondary Remote Control Kits and Extension Harnesses for 61050-0012 See Page 255
ORDER NO. Description 61050-0012 12 Volt DC, fuse 10 amp. 18753-0528 Replacement sealed beam 12/24 Volt DC, 100,000 cp
254
43670-0005
EXTENSION HARNESS
Extension harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install secondary remote control kits. For 135 SL, 146SL, 155SL (12 Volt DC), 255SL, 5" (130), 7" (180) RC models.
ORDER NO. 43990-0013 43990-0014 43990-0015 43990-0016
43990-0013
Description 10ft (3m) harness 15ft (4.5m) harness 25ft (7.6m) harness 35ft (10.7m) harness
255
SPOTLIGHTS/ACCESSORIES
5" STAINLESS SPOTLIGHT / FLOODLIGHT KIT
Remote control joystick operation 316 stainless steel base, 304 stainless steel head 12V incandescent operation Replaceable incandescent bulb One year warranty Dual station option available Light can be directed manually without damaging motors Joystick requires 2-3/4" installation hole Kit includes joystick control & 15' wiring cable with easy to install plug ends
REPLACEMENT PARTS & ACCESSORIES FOR SPOTLIGHTS For 102-22040 / 102-22044 Spotlight/Floodlight Kit
Order No. 102-22208 102-22011 102-22012 102-22014 102-22029 102-22032 102-22093
Description Control Panel Kit 25 Wiring Cable, Male to Male 35 Wiring Cable, Male to Male Replacement Bulb Motor only Rubber boot Rubber Rim
Description Control Panel Kit Dual Station Kit 25 Wiring Cable, Male to Male Replacement Bulb
256
SPOTLIGHTS
PRECISION WIRELESS CONTROLLED SPOTLIGHTS
Bright 100 Watt halogen bulb Uniform 132 sq. ft coverage with 370 rotation & 120 tilt Durable, weatherproof housing Universal 12V or 24V operation Wireless control 5 Year Warranty
SPOTLIGHTS
ORDER NO. 055-12001 055-12002 055-12003 Mfr. No. SPL-12W SPL-12B SPL-12C 202319 Colour White Black Chrome Description Spotlight, 12/24 Volt, 100 Watt Spotlight, 12/24 Volt, 100 Watt Spotlight, 12/24 Volt, 100 Watt
SPECIFICATIONS
Bulb: Power (Input voltage): Current draw (idle/in use): Peak Beam Intensity: Peak Beam Distance: Lux @ 66' (25 m): Coverage at 66' (25 m): Rotation: Tilt: Wireless range: Dimensions: Weight: Housing material: Lens material: Operating temp range: IP Rating: 100 Watt, H3 Halogen 12V or 24V 0.03 amps / 7.0 amps 210,000 Cp 917 ft (280 m) 525 Lux 132 sq ft (15'H x 12'W) (16.7 sq m [4.6 m x 3.6 m]) 370 (built in limit stops) 120 Tilt (75 up & 45 down) 200 ft (65 m) 7.5"W x 7.5"H x 9.25"D (19cm x19cm x 23.5cm) 3.30 lbs (1.5 kg) UV resistant PC/ASA UV resistant Lexan 5F113F (-15C45C) IP56
055-202319
055-12100
055-12200 055-12300
REMOTE OPTIONS
ORDER NO. 055-12200 055-12100* 055-12300 Mfr. No. SPRL-2 SPRL-1 SPRL-3 Description Wireless Bridge Remote Included Hand-Held Bridge Remote Optional Wired Bridge Remote Optional
*Battery powered (CR2540 button cell) 40 hours Battery life (continuous use)
Powerful Xenon beam illuminates objects up to one mile away Easily replaceable Xenon bulb Tough UV stabilized construction Motorized remote control operation Light can be directed manually without damaging motors Weather resistant Includes wireless remote control Easy to install Low current draw One year warranty
Amp Draw: Operation: Bulb: Overall Dim.: Base Dim.: 8 Amps, up to 10 on start 12V dc Xenon Replaceable Halogen Bulb 10.375"H x 7.375"W x 9.25"D 5.75"W x 6.25"D
ORDER NO. 105-50500
257
SHORE POWER
Broken rings, cross-threaded rings, or no ring at all have been a problem when trying to create a weathertight seal for shore power connections. Misusing the threaded ring can create unsafe operating situations and ruin a pleasant day of boating. Marincos new, patented locking system eliminates the need for the traditional locking ring, creates a watertight seal every time, and ensures a safer boating experience.
EEL SHOREPOWER
Patented Jaw Clamp technology No threaded ring required Create a watertight seal every time Proprietary built-in cord light Added safetyalert light indicates if you are still plugged in at the dock Emergency flashlight to lead your way back to the dock Power Indicator Light on both ends Informs you that power is flowing through the cord Secondary lock for added security When engaged, the jaws cannot release Universal Connection Connects to any brand, NEMA configured inlet
YEAR
WARRANTY
YEAR
WARRANTY
BOAT SIDE
ORDER NO. Mfr. No. FEMALE CONNECTOR Attaches to boat inlet or cordset 30A 125V Locking w/ Sealing Collar System 15A 125V Straight Blade
DOCK SIDE
MALE PLUG Attaches to dockside receptacle or cordset 15A 125V Straight Blade w/ locking screw 30A 125V Locking
555-001530 Replaces #055-0104SPP & #055-01040 555-003015 Replaces #055-0105SPP & #055-01050 555-030503 Replaces #055-01110 555-030504 Replaces #055-01170
P15-30
P30-15
P30-503
50A 125V Locking w/ Sealing Collar System 50A 12/250V Locking with Sealing Collar System
P30-504
258
see: www.marinco.com
Power inlet, 316 Stainless Steel with 4-way right angle rear safety enclosure. Lock Locators are now cast into the cap for quick, trouble-free cap closing. No more threading! Mfr. No. 303SSEL-B ORDER NO. 055-03020 New Soft Touch design with EasyLock System, 316 Stainless
Power inlet, watertight, with 4-way right angle rear safety enclosure. Marine stainless steel trim. Mfr. No. 301EL-B ORDER NO. 055-03010 Non-metallic inlet with Easy Lock System
Contoured and high-style appearance for today's smooth deck designs Features Marinco's exclusive Easy Lock System for easy cordset to inlet attachment The simplest and most user friendly installation available New rear safety enclosure provides protection and safe, reliable strain relief Corrosion resistant plastic housing UL Marine listed CSA Certified
Dimensions: 4-1/2" H x 3-7/8" W x 2-13/16" D Exposed depth after installation: 13/16" Installation hole: 2-3/4" Diameter
NEMA L5-30R 30A 125V LOCKING
5 YEAR WARRANTY
5
6 7
259
ELECTRICAL CONNECTORS
BOAT SIDE
ORDER NO. Mfr. No.
FEMALE CONNECTOR Attaches to boat inlet or cordset
DOCK SIDE
MALE PLUG Attaches to dockside receptacle or cordset
555-503230
Replaces #055-01520
Y503-2-30
2-30A 125V Locking w/ Sealing Collar System 2-30A 125V Locking w/ Sealing Collar System
555-504230
Replaces #055-01530
Y504-2-30
555-030230
Replaces #055-01570
Y30-2-30
555-113015
555-111530
BOAT SIDE
ORDER NO. Mfr. No.
FEMALE CONNECTOR Attaches to boat inlet or cordset
DOCK SIDE
MALE PLUG Attaches to dockside receptacle or cordset
555-113015
Replaces #055-00810
S30-15
555-111530
Replaces #055-00830
S15-30
260
ELECTRICAL CONNECTORS
104SPP
105SPP
111A
117A
ADAPTERS
ORDER NO. Note:
These adapters are equipped with covers and sealing collars (where indicated), and are for use in wet locations.
055-0104SPP
104SPP
055-0105SPP
105SPP
YEAR
055-01110
111A
WARRANTY
055-01170
117A
MARINCOS unique sealing collar system with MARINEGUARD II cover joins the adapter to the cordset with a positive, mechanical connection which provides maximum moisture protection.
152AY
157AY
Y ADAPTERS
ORDER NO. Mfr. No. BOAT SIDE DOCK SIDE (FEMALE CONNECTOR) (MALE PLUG) Attaches to boat inlet Attaches to dock side receptacle or cordset or cordset 2-30A 125V Locking w/ Sealing Collar System 50A 125V Locking 50A 125V/250V Locking
Note:
055-01520
152AY
These adapters are equipped with covers 055-01530 and sealing collars (where indicated), and are for use in wet locations. 055-01570
153AY
2-30A 125V Locking w/ Sealing Collar System 2-30A 125V Locking w/ Sealing Collar System
157AY
YEAR
WARRANTY
261
6371EL-B 50 AMP 125V POWER INLET 316 stainless steel Easy Lock System Soft Touch cap design Rear safety enclosure with strain relief Includes Easy Lock ring Order No. 055-06371
6351EL-B 50 AMP 125V POWER INLET Glass-filled polyester Easy Lock System Watertight Rear safety enclosure with strain relief Includes Easy Lock ring Order No. 055-06351
6153SPP 50A 125V 6 gauge 3 conductor flexible 50 ft. cable with molded ends and LED light on female connector Order No. 055-06153
500R THREADED RING For use with 50A systems. Black LEXAN Order No. 055-05000
510R SEALING COLLAR WITH THREADED RING Provides max. moisture protection between cordset and adapter. Black LEXAN Use with 50A systems only Order No. 055-05100
All cordsets include a threaded ring and the MARINCO Easy Lock ring.
7717N Weatherproof Cover Use with 6361CRN or 6365CRN Order No. 055-07717
Plug (male), yellow nylon with CABLOCK system. Mfr. No. 205CRPN Order No. 055-02054
Connector (female), yellow with CABLOCK system. Mfr. No. 205CRCN Order No. 055-02053
262
TELEPHONE CORDSETS
Telephone cordset, 50' 3 conductor #16SJTO yellow vinyl cord to provide portable telephone connection for recreational vehicles and pleasure boats. 50 ft. (Mfr. No. PH6599) ORDER NO. 055-65992
055-65992
BOAT INLET
Hull Inlet, 316 stainless steel, watertight. Contains telephone and cable TV connections. Features Easy Lock system. Corrosion Resistant Outdoor Telephone Connecting Devices for Marinas and Recreational Vehicle Parks MARINCO Telephone Connecting Devices are in accordance with Federal Communications Commission Standards. For specifics on the Standard, refer to Federal Register, Vol. 41 No. 134, dated Monday, July 12, 1976. Mfr. No. PH6592TV-SS ORDER NO. 055-65940
THREADED RING
Black LEXAN. For use with 30A systems. Mfr. No. 100R ORDER NO. 055-01100
WEATHERPROOF COVER
Cover for 305CRPN or 205CRPN. Mfr.No. 102N ORDER NO. 055-11020
50 AMP RECEPTACLE
Receptacle 50A 125V/250V Wire Dockside Receptacle, 3 Pole, 4 Wire Mfr. No. 6369CR ORDER NO. 055-63690
WEATHERPROOF COVER
Yellow LEXAN polycarbonate with lift lid Fits 50A receptacles (6369CR, 6370CR) Mfr. No. 7788CR ORDER NO. 055-77880
263
BATTERY CHARGERS/MAINTAINERS
PROSPORT SERIES MAINTAINERS 1.5 AMP BATTERY MAINTAINERS
Ideal for Sport Fishing, Ski Boats Jet Skis, ATVs, Tractors and more. ProSport 1.5 Recreational Maintainers are available in Portable and On-Board Models. Designed to provide your batteries with a precise Maintenance Mode, safe for long and short term battery storage. The ProSport is a fully automatic / precision regulated maintainer that can be left on indefinitely & unattended while keeping your battery fully charged and extending its life. Great for ski boats, personal watercraft, tractors, storing automobiles and more. Fully Automatic Maintenance Mode for Long or Short Term Storage Internal Lead Acid / GEL Battery Selector Providing an optimum maintenance mode for either battery type. A feature not in competitive plastic models
ProSport 1.5 On-Board
Designed to Maintain 12V Batteries up to 150 Amp Hours Precision Regulated Float Mode Built-In Protection Ignition, reverse polarity, over temperature, and short circuit protection. LED ON Indicator Pre-Wired for Easy Installation Will Not Drain Batteries if Left Connected with No AC Power Present Certified to Marine UL 1236
Specifications
MODEL NO. PRO-SPORT 1.5 PORTABLE PRO-SPORT 1.5 ON-BOARD
ORDER NO 001-10115 001-10116 Note: Specifications subject to change without notice
Volts 12 12
Bank 1 1
Cable Length 4 4
AC in 95-135 95-135
D I S T R I B U T E D - O N - D E M A N D C H A R G I N G
Specifications
MODEL NO.
ORDER NO.
ProTournament 100**
001-51010**
ProTournament 150
001-51015
Mfr. No. VOLTS AMPS BANKS CHARGE RATE CABLE LENGTH SIZE (H x W x D) WEIGHT AC in
51010 ** 12 / 24 10 2 100 amps / 10 hrs. 6' / 6' 3" x 12" x 6-7/8" 6 lbs. 90 - 270
51015 12 / 24 / 36 15 3 150 amps / 10 hrs. 6' / 6' / 6' 3" x 13" x 6-7/8" 8 lbs. 90 - 135 *
51032 12 / 24 30 2 300 amps / 10 hrs. 6' / 6' 3" x 15.5" x 6-7/8" 10 lbs. 90 - 135 *
51030 12 / 24 / 36 30 3 300 amps / 10 hrs. 6' / 6' / 6' 3" x 15.5" x 6-7/8" 10 lbs. 90 - 135 *
Note: * Factory/Internal selection 180 - 270 VAC ** The ProTournament 100 does not include the onboard Push-to-Test battery bank indicators Specifications subject to change without notice
264
BATTERY CHARGERS
ProSport 20 Plus
ProSport 20
ProSport 8
Distributed-On-Demand Technology Automatically charge and maintain engine crank battery(s) while sensing and distributing 100% of the available charging amps to trolling motor or house bank battery(s). Automatic Multi-Stage Charging Fully charge and extend the life of your batteries with ProSports multi-stage performance charge profiles. Automatically charges and conditions your batteries with a built-in safe maintenance mode for long or short term storage. Extruded Aluminum Housing For superior heat transfer and durability Dynamic Thermal Output Control Controls charging amps while maintaining the recommended charger temperature Built-in Quality & Safety Compact and rugged design, 100% waterproof and shockproof, dual inline DC safety fuses for trolling motor/accessory battery banks, dynamic thermal output control, over voltage, overload, over temperature, reverse polarity, and ignition protection Pre-Wired for easy installation Cable ORDER NO. Mfr. No. Description Volts Amps Banks Length
001-42006 001-42008 001-42012 001-42020 001-42021 42006 42008 42012 42020 42021 ProSport 6 ProSport 8 ProSport 12 ProSport 20 ProSport 20 Plus 12 12/24 12/24 12/24 12/24/36 6 8 12 20 20 1 2 2 2 3 5' 5'/5' 5'/5' 5'/5' 5'/5'/5'
Dimensions LxWxH
5.75" x 7.25" x 2.5" 7" x 7.25" x 2.5" 8.5" x 7.25" x 2.5" 10.75" x 7.25" x 2.5" 10.75" x 7.25" x 2.5"
connect to the engine crank battery and your house electronic battery, allowing for up to 40 Amps per hour to be transferred to your house battery bank. Protects your engine battery while charging and conditioning your house battery bank, using its all-digital C3 boost-mode-charging technology.
Digital Mobile Charge130 alternator to battery on-the-water charging system provides a significant increase in
charging capacity of up to 130 amps. Simply connect your alternator to the Digital Mobile Charge130, then connect Digital Mobile Charge130 to your engine crank battery and house electronic battery bank. Digital Mobile Charge130 will provide up to 130 Amps per hour to your house battery bank while protecting your engine battery and charging/conditioning your house battery with its all-digital C3 boost mode charging technology.
Battery to Battery In-Transit C3 Software Controlled, Multi-Stage Charging - Optimal fast charge, conditioning & maintenance. 4th stage provides on-demand fast charge mode when needed. C3 Software - Engine Battery Management - Intelligently monitors & manages the health of the engine battery while providing maximum charge capacity to the auxiliary battery or bank. C3 Intelligent Self-Calculating Absorption/Conditioning Mode - Automatic programming of charge/absorption time based on discharge state of auxiliary battery or bank resulting in a 100% charge while desulfating battery plates and extending battery life. On-Board C3 Digital Dash Includes Hi-Vis LEDs - Battery type, charge modes, temperature & fault conditions User Programmable Battery Type Selector - Select flooded (lead-acid), AGM and GEL batteries Built-in Safety - Ignition protection, over temperature and over voltage protection. Intelligent alternator & battery over temperature protection
Alternator to Battery
ORDER NO. 001-55040 001-55130
Description Digital Mobile Charge40 12V to 12V Battery to Battery 12V Digital Mobile Charge130 Alternator to Battery
DC Output (Volts/Amps) 12 Volts/40 Amps 12 Volts/Up to 130 Amps (Varies w/ Alternator Size)
265
BATTERY CHARGERS
ProNauticP Series
PRONAUTICP SERIES BATTERY CHARGERS PROMAR DIGITAL PERFORMANCE CHARGING
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on board today's power, sail, cruising and sport fishing boats. Features: ProMar Digital Charging Performance - 12 Selectable Profiles Power Factor Correction - Global AC Input Distributed-On-Demand Technology Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode Conservation Energy Saver Mode Service and Fault Mode LED Indicators Automatic Fan Speed Control Automatic Temperature Compensation and Built-in Safety: Marine ULc 1236, CE, CTick and FCC Class B Available in 12V or 24V Models ORDER NO. 001-63110 001-63115 001-63120 001-63130 001-63140 001-63150 001-63160 001-63141 001-63151 001-63170 001-63180 Mfr. No. 63110 63115 63120 63130 63140 63150 63160 63141 63151 63170 63180 Description ProNautic 1210P ProNautic 1215P ProNautic 1220P ProNuatic 1230P ProNautic 1240P ProNautic 1250P ProNautic 1260P ProNautic 1280P Dual ProNautic 12100P Dual ProNautic 2420P ProNautic 2430P Volts 12 12 12 12 12 12 12 12 12 24 24 Amps 10 15 20 30 40 50 60 80 100 20 30 Banks 2 3 3 3 3 3 3 3 3 3 3 AC Input 100-260 100-260 100-260 100-260 100-260 100-260 100-260 95-20 95-20 100-260 100-260 Cycle 50\60 50\60 50\60 50\60 50\60 50\60 50\60 50/60 50/60 50/60 50/60 Dimensions 10.25 L x 8.5 W x 3.5 H 10.25 L x 8.5 W x 3.5 H 10.25 L x 8.5 W x 3.5 H 10.25 L x 8.5 W x 3.5 H 10.25 L x 8.5 W x 3.5 H 12.25 L x 8.5 W x 3.5 H 12.25 L x 8.5 W x 3.5 H 10.25 L x 10 W x 9.5 H 12.25 L x 8.5 W x 9.5 H 10.25 L x 8.5 W x 3.5 H 12.25 L x 8.5 W x 3.5 H
Float Voltage 13.3 VDC 13.6 VDC 13.4 VDC 13.7 VDC 13.6 VDC 13.6 VDC 15.5 VDC
Preset-2 Conditioning Voltage 14.7 VDC 14.6 VDC* 14.6 VDC 14.4 VDC 14.8 VDC Pgrm VDC** 15.5 VDC
ACCESSORIES
OPTIONAL DIGITAL DISPLAY AND CONTROL REMOTE
ProNauticP optional remote available for interactive remote port for digital display and control. ORDER NO. 001-63100 Expand your ProNauticP Digital Charging System with Mfr No. 63100 PROISOCHARGE SERIES (See next page)
266
BATTERY CHARGERS
Charge and Isolate Multiple Batteries from a Single Alternator
PROISOCHARGE SERIES
INTELLIGENT ALTERNATOR POWER DISTRIBUTION SYSTEM
ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). ProMar Digital Performance Zero Volt Loss Isolation and Charging Intelligent Isolation and Charging Software Control Real Time LED Status Indicators Ignition Controlled Advance Regulator Ready Easy Installation Built-in Safety - Ignition protected
Volts DC 12 12 12
Battery Outputs 2 3 3
Dimensions 5.35 L x 5.875 W x 3.125 H 6.15 L x 5.875 W x 3.125 H 7.55 L x 5.875 W x 31.25 H
PROMAR1 SERIES
(REPLACES PROMITE SERIES BATTERIES MODEL NOS. 31305, 31310 AND 31315)
ProMar Digital Performance Charging Inside Fully Automatic Charging Single Pre-set Charging Profile Expanded LED Status Center Distributed-On-Demand Technology Built-in Quality & Safety Pre-Wired for Easy Installation AC Input: 115 VAC/60 Hz Cable length: 6 AC and DC 2 Year Warranty Available in 3 models Single, Dual and Triple Bank
5 AMP SINGLE BANK Max. Batteries: 1 12V Ideal Use: Single 12V engine crank battery or Single 12V trolling motor battery DC Output: Single 12V output at 5 Amps maximum AC Input: 115 VAC / 60Hz Cable Length: 6 AC and DC Order No. 001-31405 Model: 31405
5/5 10 AMP DUAL BANK Max. Batteries: 2 12V 12V Ideal Use: Single 12V engine crank battery + One 12V trolling motor battery (for 12V trolling motor) DC Output: Dual 12V output at 10 Amps maximum fully distributed AC Input: 115 VAC / 60Hz Cable Length: 6 AC and DC Order No. 001-31410 Model: 31410
5/5/5 13 AMP TRIPLE BANK Max. Batteries: 3 12V 12V 12V Ideal Use: Single 12V engine crank battery + Two 12V trolling motor battery (for 24V trolling motor) DC Output: Triple 12V output at 13 Amps maximum fully distributed AC Input: 115 VAC / 60Hz Cable Length: 6 AC and DC Order No. 001-31413 Model: 31413
Note: Not for use with AGM (Absorbed Glass Matt) For more information see: www.promariner.com or 4D or 8D large capacity batteries
267
TRUEPOWER COMBIQS Combination Battery Charger / Quasi (Modified) Sine Wave INVERTER
Designed for the most rugged marine applications. Seamless conversion of DC battery power to filtered low noise AC household power. AC switch automatically selects AC or DC power inputs (Depending on which source is available), ensuring AC household power is available at all times. TruePower QS includes a digitally controlled, True 3-Stage battery charger than can automatically recharge, condition and maintain batteries. Whether on the water or on the road, TruePower QS Series is ideal for large AC load applications such as air conditioners, refrigerators, microwaves, hair dryers, office equipment, power tools and more. Compact, Robust Design Easy-to-install, space design Fully Automatic Battery Charger and Inverter Instant AC transfer switch passes AC shore/station power. Charges batteries when shore/station power is present, or switches safely into DC to AC inverter mode, making AC household power available on the water or on the road. Removable Deluxe Remote Charger Mode: Integrated, Automatic True 3-Stage Marine Grade Battery Charger On/Off Standby power modes Built-in digital control technology provides seven user-selectable charge profiles for todays various battery chemistries and high visability LED indicators Inverter Mode: Efficient, Quiet Conversion from DC Power to AC Power for Charger, Inverter and Fault Filtered Quasi (modified) Sine Wave AC output. Ideal for appliances, power tools and electronics . modes. Includes connector plate Inverter delivers 2.8 times surge capacity for demanding applications - air conditioners, and interface cable. microwaves, refrigerators and more. Pure sine wave passes through while connected to AC shore/station power RoHS Built-in Safety: Overload, Over Temperature, High and Low Battery Voltage Protection compliant Designed and constructed to FCC Class A, Marine UL 1236, UL 458, and CE ABYC-A31 Marine Compliant
ORDER NO.
Mfr. No. Description Dimensions LxWxH DC Input Ratings DC Amps (Max. Continous) AC Amps AC Output Ratings Power Rating Electric Motor Start Capability 1/2 HP @10.5 VDC 1 HP @10.5 VDC 1 HP @10.5 VDC AC Input Ratings AC Input Breaker DC Output Ratings Nominal Output
(Max. Continous) (Continous Peak Watts) Up to 9.1A Up to 13.6A Up to 22.7A 1000/3000 1500/4500 2500/7200
Rating (Amps AC) Charger Amperage 16A 20A 30A Up to 40 Amps DC Up to 40 Amps DC Up to 50 Amps DC
TruePower1000PS 110VAC / 12 VDC TruePower1500QS 110VAC /12 VDC TruePower2500QS 110VAC / 12 VDC
001-02012 001-02024
02012 02024
Up to 200A Up to 100A
268
Input Polarity Protection Overload Protection Thermal Protection Output Short Circuit Protection
DESCRIPTION
TruePower 400 Watt Output Inverter TruePower 600 Watt Output Inverter TruePower 800 Watt Output Inverter TruePower 1000 Watt Output Inverter TruePower 1500 Watt Output Inverter
Dimensions(L) x (W) x (H) 9.25 x 6.0 x 3.0 12 x 8.2 x 3.5 14.4 x 8.2 x 3.5 14.4 x 8.2 x 3.5 17.8 x 10.0 3.5
Surge Rating 800 Watts 1200 Watts 1600 Watts 2000 Watts 3000 Watts
DESCRIPTION
Standard Remote Battery Bank Cable Extender 15 Battery Bank Cable Extender 5
Battery Low alarm /Shutdown Size Cable Length 10.5 V DC/10V DC 6"(L) x 2.625"(W) 3 ft.
269
BATTERY ISOLATORS/ACCESSORIES
Battery Isolators ProMariner Battery Isolators with gold-plated terminals* and improved efficiency, provide enhanced charging
Rated for use with DC devices ranging from 10 amps to 130 amps.
ORDER NO. 001-17020 001-17030 001-27020 001-27030 001-13020 001-13030 001-21302 001-21303
Mfr. No. 01-70-2* 01-70-3* 02-70-2 02-70-3 1-130-2* 1-130-3* 2-130-2 2-130-3
Configuration 1 Alt., 2 Batt. 1 Alt., 3 Batt 2 Alt., 2 Batt 2 Alt., 3 Batt 1 Alt., 2 Batt 1 Alt., 3 Batt 2 Alt., 2 Batt 2 Alt., 3 Batt
Max. Current 70 amp 70 amp 70 amp 70 amp 130 amp 130 amp 130 amp 130 amp
BATTERY GAUGES
These battery gauges allow you to determine the exact amount of charge remaining in your batteries
270
BATTERY CHARGERS/BINOCULARS
WATERPROOF CHARGING ACCESSORIES
Handheld DC System Tester 001-87710 Handheld Digital Multi-Meter 001-87730
Description Handheld DC System Tester Handheld Digital Multi-Meter Remote Battery Bank Status Indicator ProMariner AC Plug Holder Universal Plug Holder
MARINE BINOCULARS
ProMariner's innovative Marine Binoculars are perfect for onboard use. Their ruby coated lenses incorporate BAK4 prisms for great light retention and glare reduction. ProMariner Marine Binoculars are nitrogen filled, fog proof, and waterproof. Best of all they'll float if accidentally dropped overboard.
HIGH SEAS MARINE BINOCULARS PREMIUM GRADE COASTAL & OFFSHORE OPTICS
MODEL 12751 Navy Style Quality Design Waterproof/Fogproof/Nitrogen Filled Centre Focus BAK 4 Prisms Field View Angle: 7.1 Field of View: 124m/1000m Retained Lens Caps Ruby Coated Lenses Molded Finger Grips Internal Illuminated Range Finder & Compass Integrated Range Calculator Available in Standard 7 x 50 Model
ORDER NO. 001-12751
Binoculars, 8 X 30 Binoculars, 7 x 50
271
BATTERY CHARGERS
TROLLING MOTOR CHARGERS
Single Battery Applications
2608A
12V
2607A
12V 12V
OR
24V
2611A
12V 12V
OR
24V
2620A
12V 12V
OR
24V
*Recovery times are based on approximate time to restore 100 AMP Hour Deep Cycle Batteries at 60% discharge.
272
BATTERY CHARGERS
TROLLING MOTOR CHARGERS
Triple Battery Applications
2613A
12V 12V 12V
OR
24V 12V
2631A
12V 12V 12V
OR
24V
OR
12V
36V
ORDER NO. 102-02631
30 Outputs: 3 10/10/10 12V+12V+12V or 24V+12V or 36V 100-130V AC/60 Hz 12V 5-6 Hours 3-6' With Ring Terminals 17" x 13" x 2.6" 13 lbs
Recovery Time* Maintain Charge Maintain Charge 8-10 Hrs. 16-20 Hrs. 6-8 Hrs. 5-6 Hrs. 10-12 Hrs. 5-6 Hrs.
Termination Alligator Clips Alligator Clips Ring Terminals Ring Terminals Ring Terminals Ring Terminals Ring Terminals Ring Terminals
Dimensions
DC Cable 1 - 4'
Weight 0.5 Lbs. 4-5 Lbs. 4 Lbs. 4 Lbs. 5.6 Lbs. 8 Lbs. 8 Lbs. 13 Lbs.
7.5" x 5" x 2.4" 3.5" x 6.4" x 2.25" 3.5" x 6.4" x 2.25" 5.5" x 7.75" x 2.42" 7" x 9.6" x 2.63" 7" x 9.6" x 2.6" 7" x 13" x 2.6"
12V
Dual Battery App.
12V
12V
12 or 24 volt systems
12V
12V
12V
30 (10/10/10) On-Board
*Recovery times are based on approximate time to restore 100 AMP Hour Deep Cycle Batteries at 60% discharge.
273
BATTERY CHARGERS
BLUEWATER CHARGERS
uest Cruising Chargers are made specifically for a coastal, blue water environment where top quality, rugged equipment is required. They feature SmartLeg Technology, which provides individual charging attention to each battery and eliminates potential for over charging. The benefit is a well-designed charging system that protects your battery investment. Guest Cruising Chargers also function as a continuous 12 Volt power supply to run our DC accessories while at the dock.
Dedicated output per battery, each battery receives individual attention Differentiates and provides different charging amperage to each battery depending on the batterys usage curve Designed to be used as a continuous power supply
2621A
12V 12V 12V
2632A
12V 12V 12V
Guest Bluewater Cruising Chargers feature an enclosed AC wiring pocket, LED lights that indicate operation status and fused battery wiring leads.
Cruising Chargers
Amps Type Model Volts Termination Dimensions Weight
2621A 2632A
12V/12V/12V 12V/12V/12V
12V
12V
12V
274
BATTERY CHARGER/MAINTAINER
PORTABLE & MAINTAINER CHARGERS
2612A 10 AMP PORTABLE CHARGER
12V
Total Amps: 10 Input Voltage: 100-130v AC/50-60Hz Output Voltage: 12V Battery: 12V Dimensions: 7.5" W x 5" H x 2-1/4" D Weight: 4.5 Lbs. Use to charge and/or maintain 12V batteries Waterproof, shockproof, and corrosion proof 6 ft. AC cord & 4-ft. DC output wire with alligator clips LED power indicators and overload protection Two year warranty ORDER NO. 102-02612 Mfr. No. 2612A This powerful 3-stage portable charger is designed for heavy duty, fast, full charging maintenance and storage.
2602
BATTERY MAINTAINER
12V
Total Amps: .5 Input Voltage: 100-130v AC/60Hz Output Voltage: 12V Amps: 500mA/250mA
Use to maintain 12V batteries during storage Maintains 12 volt flooded or gel cell batteries rated between 5 &125 amp hours LED power indicator Two year warranty ORDER NO. 102-02602 Mfr. No. 2602
275
BATTERY CHARGERS
PRECISION ON-BOARD CHARGERS
YOUR EXCUSE TO TAKE THE LONG WAY.
Longer run times. Shorter charge times. Thats the precision difference that makes the all new chargers the best on the water. You get the fastest charge, hands down. You also get a smart, precise charge that protects your battery, extends its life and creates longer run times. So you get out there quicker, and stay out there longer.
718-23451 718-24601
SPECIFICATIONS Waterproof, shock- and vibration-resistant aluminum construction Saltwater-tested, fully corrosion-resistant construction Short circuit, reverse polarity, arc and ignition protected For use with 12, 24, 36, or 48 volt systems with 12V/6 cell batteries that are Flooded Lead Acid, Maintenance Free, starved electrolyte (AGM/HP AGM) or Gel only (60-180 amp hour rating). FCC Compliant Designed to UL 1236 marine standard The Precision Difference
718-22301
All Minn Kota on-board chargers are designed to create fast, safe charges. But Precision Chargers take it to a whole new level, adding features like Battery Equalization, Low-Line Voltage Compensation and True-Rated Output to create the fastest, most protected charge on the water. Easy Operation Its easy to get a precise charge. A comprehensive LED display lets you select your battery type by bank, and monitor each banks connection status, power status, state of charge and selected battery type. Plus, Precision Chargers are half the weight and more compact than traditional chargers. Unparalleled Durability First and foremost, these Precision Chargers have the legendary durability of a Minn Kota. Plus, they feature a rugged, marine-grade aluminum housing and fully corrosion-resistant design. Each is backed up with a comprehensive three-year warranty. Digital control A microprocessor-based design enables these chargers to continually monitor the temperature and state of charge. It means a faster, more regulated, precise charge for your battery and a longer day of worry-free fishing for you. THE FASTEST CHARGE Precision Chargers juice up your battery faster than any other charger. End of story. True-Rated Output Delivers a more consistent 15-amp output for a faster charge. Low-Line Voltage Compensation Outlets are supposed to put out 120 volts. But overloading outlets or using long extension cords can lower that output, and make charge times go up. Thats why Precision Chargers compensate to deliver a fast, consistent charge every time. SMART, PROTECTIVE CHARGING A full, precise charge creates longer run times and longer battery life. Automatic Temperature Compensation Charging your batteries at higher or lower temperatures can damage your battery. Precision Chargers are designed to sense outside temperature fluctuations and adjust charging accordingly, providing a fast, accurate charge. Battery Equalization Every time you hook up to a Precision Charger, it automatically cleans and conditions your battery to extend run time and battery life. And at the push of a button, you can activate a full, thorough equalization. Multi-Stage Charging Multi-Stage Charging controls the voltage and current your battery gets throughout charging cycle, ensuring a fast, safe and precise charge. AC Plug Holder Keeps plugs dry, safe and easily accessible. Included with all Precision and Digital Chargers.
DESCRIPTION
MK 230PC On-Board Charger MK 345PC On-Board Charger MK 460PC On-Board Charger
LENGTH
9-1/2" 13" 16"
WIDTH HEIGHT
10" 10" 10" 3-3/4" 3-3/4" 3-3/4"
# OF BANKS
2 3 4
276
BATTERY CHARGERS
ON-BOARD DC ALTERNATOR CHARGERS
Our DC Alternator Chargers utilize power from the main engine to help charge your trolling motor batteries. Each model features a waterproof, low-profile, corrosion-resistant design, and a master cutoff switch. Alternator charging design uses current from boat's alternator to re-charge trolling batteries when main engine is running Charge-on-the-fly circuitry puts additional juice back in your trolling batteries on runs between fishing spots, and they turn off when the engine stops LED indicators display power-on, charging and check connection Waterproof, shock and vibration-resistant design delivers exceptional durability in harsh, marsh environments Engineered with advanced corrosion protection to withstand the destructive effects of saltwater For use with 12 volt systems with 12V / 6-cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only Includes one 6-foot fused input cable and one 6-foot fused output cable FCC compliant
* Appropriate time to restore deep cycle batteries at 60% discharge. **Dependent on alternator output *** Dependent on alternator output and amount of time engine runs.
718-23305
Digitally controlled Protects batteries with Multi-Stage and Automatic Temperature Compensation feature Twice as fast charging Enhanced status codes: charge stage, maintenance mode status, any error notifications, full charge Waterproof, shock- and vibration-resistant aluminum construction Saltwater tested and fully corrosion-resistant Short circuit, reverse polarity, arc and ignition protected For use with 12V/6 cell batteries electrolyte (AGM) only FCC compliant UL listed to marine standard 1236
718-24405
MK 106D On-Board Charger 8-3/4" 4-3/4" 3" MK 110D On-Board Charger 10-1/2" 7-1/2" 4" MK 210D On-Board Charger 11-1/2" 7-1/2" 4" MK 220D On-Board Charger 13-1/2" 7-1/2" 4" MK 330D On-Board Charger 16-1/4" 7-1/2" 4" MK 440D On-Board Charger 11-3/4" 6-3/4" 8" * Approximate time to restore deep cycle batteries at 60% discharge.
277
BATTERY CHARGERS
PACIFIC SERIES BATTERY CHARGERS 450 AMPERE CLASS, DESIGNED FOR 12 OR 24 VOLT SYSTEMS
Battery Specific Charging (BSC) charges a mix of flooded, Gel and AGM batteries in the same system by adjusting the absorption and float voltages to compensate for the varying charge profiles of different battery types. Universal Line Voltage 90-265V AC 50/60 Hz for use anywhere in the world, and compatibility with low voltage power sources. Advanced Multi-Stage Charging Bulk, Absorption, Float stages along with Battery Health which repeats the charge cycle weekly during storage or over extended periods. Rugged finned cast aluminum case for maximum heat dissipation. Multi-Language display that is easy to read for set up, monitoring, and diagnostics. Optional remote display (CC No. # 738-75190) repeats battery charger onboard display information as well as AmpHour / State of Charge for house battery with purchase of PN 8255 DC shunt.
Specifications:
Nominal DC Voltage . . . . . . . . . . . . . . . . . . .12V DC Number of Outputs . . . . . . . . . . . . . . . . . . . .3 Maximum Output Voltage DC . . . . . . . . . . . .15.9V DC Output Voltage Accuracy . . . . . . . . . . . . . . . .0.05V DC Minimum AC Input Voltage . . . . . . . . . . . . . .90V AC Maximum AC Input Voltage . . . . . . . . . . . . .265V AC Minimum Operating Temperature (C) . . . . . .-40C Maximum Operating Temperature (C) . . . . . .85C Minimum Storage Temperature (C) . . . . . . . .-55C Maximum Storage Temperature (C) . . . . . . .-125C Maximum Parasitic Current . . . . . . . . . . . . . .2mA Charger Efficiency . . . . . . . . . . . . . . . . . . . . .>80% Order No. 738-75210 738-75220 738-75230 Mfr. No. Voltage 7521 7522 7523 12V DC 12V DC 12V DC Amps 20A 40A 60A Output 3 3 3 Recommended Mounting Clearance (A) Height in (mm) 11.66 (296.16) 11.66 (296.16) 11.66 (296.16)
738-75210
Recommended Mounting Clearance (B) Height in (mm) 16.3 (414.02) 16.3 (414.02) 18.27 (464.06)
278
BATTERY ACCESSORIES
L-SERIES SOLENOID SWITCH WITH COIL ECONOMIZER 450 Ampere Class, Designed for 12 or 24 Volt Systems
450 Amp Class Designed for 12 or 24 Volt systems Ignition protected - safe for installation aboard gasoline-powered boats Can function as a remote battery switch Activated by a low amperage ON-OFF switch mounted anywhere Hermetically sealed contacts / vapourproof Integrated coil control minimizes heating and amperage draw Marked 12/24 Volt Order No. 738-90120 Mfr. No. 9012
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, in Start or Engine isolation (requires optional LED) 3/8" - 16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/8" stud length to accept multiple cable terminals Label recesses for circuit identification Silver alloy contacts provide high reliability for switching live loads Regulatory: Marked Meets ISO 8846 ignition protection, and SAE J1171 external ignition protection requirements. IP66 - Protected against powerful water jets ORDER NO.738-76200 Mfr. No. 7620
279
BATTERY SWITCHES
m-SERIES BATTERY SWITCHES (Mini)
300 ampere Continuous Rating for outboards and small gasoline or diesel engines
Ignition protected - Safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts
Order No. 738-60050 738-60060 738-60070 738-60100 738-60110 Mfr. No. 6005 6006 6007 6010 6011 Description Single Circuit ON/Off Battery Switch w/Key Single Circuit ON/Off Battery Switch w/Knob Selector Battery Switch Dual Circuit Battery Switch Dual Circuit Plus Battery Switch
Model No. 6010 ORDER NO. 738-60100
Ignition protected - Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches
Order No. 738-90011 738-90021 738-90031 738-55111 Mfr. No. 9001e 9002e 9003e 5511e Description Selector Battery Switch, 4 position Selector Battery Switch w/AFD*, 4 position Single Circuit ON/Off Battery Switch Dual Circuit Plus Battery Switch
* Alternator Field Disconnect (AFD) protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running.
280
BATTERY SWITCHES
BATTERY SELECTOR SWITCHES
Alternator field disconnect (AFD) allows selection of any position, including off, without damage to alternator or electrical system. AFD is required on some electrical systems. New design is easy to retrofit into existing hole patterns Heavy-duty copper sweep contacts Built in skirt protects connections Positive click-stop on all positions Surface or rear panel mounting Make before brake contacts allow selection of all Durable marine grade polycarbonate case positions except off while engine is running 1 year limited warranty Use with 6, 12, 24 or 36 volt systems
230 345 5"D x 2-3/4"H Grey Mfr. No. 2110A 2111A Description Battery Selector Switch with AFD Battery Selector Switch without AFD
Description Battery Selector Switch with AFD Battery Selector Switch without AFD On/Off Switch without AFD
MINI ADD-A-BATTERY
Simplifies switching and automates charging for a complete two battery bank solution for outboard powered boats What does the Mini Add-A-Battery do? Adding a second battery prevents getting stranded with a dead battery by isolating the start battery from the house loads that can quickly discharge a battery. The Mini Add-A-Battery offers a compact, simple way to control the switching with the m-Series Dual Circuit Plus Battery Switch and automatically share a single source of charging between two batteries with the Mini ACR Automatic Charging Relay. Order No. 738-76490 Mfr. No. 7649
Simplifies switching and automates charging for a complete two battery bank solution Marked Meets UL 1500 AND SAE J1171 external ignition protection requirements IP67 - Temporary immersion for 30 minutes (7610 only) Features: 5511e, Dual Circuit Plus Battery Switch Simplifies battery switching Isolates engine and house circuits Combines battery banks for emergency starting Order No. 738-76500 7610, 120 Amp SI (Starting Isolation) Automatic Charging Relay Mfr. No. 7650 Automatically combines battery banks during charging Isolates battery banks when discharging and when starting engines
281
IGNITION PROTECTED
PROTECTED BY THE FOLLOWING U.S. PATENTS; DESIGN 260,637 - 4,280,028 - 4,424,424 For use with 12, 24 and 32 Volt Marine Electrical Systems Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
Mfr. No. 8501DP Mfr. No. 8502DP For Dual Engine Systems, two switches are required.
Mfr. No. 8503DP Mfr. No. 8504DP When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned OFF with the engine running.
Description / Features
Alternator Field Disconnect
ORDER NO.
Mfr. No.
Diameter Inches
Depth Inches
2-5/8" 2-5/8"
NO NO
5-1/4" 5-1/4"
2-5/8" 2-5/8"
YES YES
8504DP
282
BATTERY SWITCHES
BATTERY SWITCHES
UV stable, impact and chemical resistant polycarbonate plastic Tin plated copper studs Removable side plates for ease of cable attachment Switches include removable back plate for flush mount applications Extra large cable access, up to 1/0 for the mini switch and 4/0 for the heavy duty
ual battery charging made easy! These distribution clusters are the optimum battery management system. Featuring dedicated battery switches for each bank and a Voltage Sensitive Relay (VSR). The VSR allows for two or more batteries to be charged via the engine charging system. When the start battery reaches 13.7V the relay closes allowing the house battery to be charged. When the engine is stopped and the voltage drops to 12.8V the relay opens, isolating the start from the house battery. This prevents accidental draining of the start battery and protects sensitive electrical equipment from harmful engine start up spikes. Available for single and twin engine outboard boats with engine charging systems up to 100A. Clusters come completely bused and are easy to install. An ideal replacement for battery selector switches. 717-100A Twin Engine Cluster 5.5"L x 8"W X 3"D 3 Battery Banks ORDER NO. 770-07170
283
GALVANIC ISOLATORS
Pro SafeFS GALVANIC ISOLATOR SERIES FailSafe Technology with Peace of Mind Dependability
he ProSafe FS Series of FailSafe 30 Amp Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation published July 31, 2008.
ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non Failsafe Certified galvanic isolators. The ProSafe 30 Amp model is built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power. ABYC A-28 July 08 Compliant and Fail Safe Certified Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator Flat Pack High Power Semiconductors Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 and 5,000 amps (FS30 respectively) for the required duration period Ignition Protected Meets ISO 8846 and either model can be mounted within an engine compartment Gold Plated Terminations
Listed
284
New plus design is a standard feature on all Guest On-Board Trolling Motor and Bluewater chargers with AC plug.
he MARINCO On-Board Charger Inlet is a revolutionary design in flanged inlets. The sleek design fits almost anywhere on a boats exterior, and fishing line wont catch on the low-profile, UV resistant cap.
With the On-Board Charger Inlet hard-wired to an on-board battery charger, charging can occur with all the boats hatches closed and locked, adding convenience and security for the boater.
15A 125V straight blade inlet Small enough to be mounted almost anywhere on a boat Low profile cap wont catch fishing line Color and style fit in nicely with appearance of the boat Mounts quickly and easily to fiberglass and aluminum hulls
Perma-Lock terminals and color coded wire entrance holes makes wiring a snap UV resistant housing and cap ORDER NO. 055-01500 Mfr. No. 150BBI
122-40060
122-40080
122-40120
Description #4006 Standard 6" x 2" x 1/2" Equivalent to over 12 sq. ft. of copper sheathing #4008 D-8 Dynaplate 8" x 2-1/2" x 1/2" Equiv. to over 20 sq. ft. of copper sheathing #4012 Giant 12" x 3" x 1/2" Equivalent to over 40 sq. ft. of copper sheathing ft.
285
BATTERY MAINTENANCE
BATTERY MAINTENANCE & RESTORATIVE FLUID NATURAL MARINE BATTERY EQUALISER
his patented and proven, water-based liquid additive is the biggest improvement in battery chemistry in 75 years. By automatically putting sulphation back into liquid electrolyte it cleans the battery internally giving users up to double battery life. Other benefits include increased CCA, extended storage, 25% reduction in charge time, 32% extended running time, reduced gassing and tougher plates. Ideal in all flooded lead-acid batteries including marine, forklift, snowmobile, UPS, and solar. One 500 ml bottle treats 5 starting batteries. Ideal in all new or used batteries. Millions of bottles sold globally and marinas see battery sales increase significantly with new customer traffic. Many marinas are now offering to service batteries with Battery Equaliser in Spring or Fall. ORDER NO. 791-48261 791-48271 Size 500 ml 4L
Water and Flame Proof 6 to 32 Volt 1000 Amp Momentary Rating 250 Amp Constant Rating Polycarbonate case ISO 8846 Approved
286
BATTERIES
HEAVY DUTY BATTERIES Manganese Dioxide/Zinc Formula - Mercury Free 6V HEAVY DUTY BATTERY Bulk
ORDER NO. 041-08000
MASTERCELL ALKALINE BATTERIES Mercury and Cadmium Free Alkaline Manganese Battery 9V ALKALINE BATTERY Carded 1/Pk
ORDER NO. 041-16100
287
MISCELLANEOUS LIGHTS
3 AAA LED RUBBER FLASHLIGHT 45 LUMENS
Durable long lasting TPE rubber construction I Weather resistant I Sleek and Rugged Design I Sealed Push Button Switch I Non-slip grip I Convenient Nylon Lanyard I 120 ft. Beam I 3 AAA cell batteries included I 6 hours runtime
I
288
289
Mfr. No.41-2087
Projects a 500ft beam 3 High Flux LEDs I AC/12V Chargers included I New battery saver technology I Stands up for hands free use I Locking trigger switch I Charge Indicator Light I Rubber Grip I 2.5 Hours Runtime
I I
INCANDESCENT SPOTLIGHTS
ORDER NO. 041-10860 ORDER NO. 041-10970
290
LED FLASHLIGHTS/LANTERNS
ORDER NO. 041-42160 ORDER NO. 041-42200 ORDER NO. 041-42400
291
Waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic Maximum current draw: 2 amps Frame mount 80 or 110 sweep Adjustable right or left self-parking Shaft diameter: 1/2" Shaft length: 2-1/2" Includes 11.5" deluxe curved blade No. 103-33004 and deluxe adjustable ( 6-3/4" to 10-1/2") arm No. 103-33006 For external use in open cabin boats
ORDER NO. 103-30004 80 Sweep ORDER NO. 103-30005 110 Sweep
100% waterproof and sealed motor Chrome-plated brass corrosion-resistant case and shaft housing Stainless steel front plate and wiper shaft Maximum current draw: 2 amps Self-parking Frame mount 80 or 110 sweep 3/8" shaft diameter x 2-1/2" shaft length Includes 11" blade and adjustable arm For external use in open cabin boats
ORDER NO. 103-30000 80 Sweep ORDER NO. 103-30002 110 Sweep
12v heavy-duty motor and gear train Corrosion-proof aluminum alloy case with black crackle finish Base plate and mounting plate are naval brass with heavy, chrome plating Maximum current draw: 2 amps Adjustable right or left self-parking Frame or deck mount Includes 11" blade and adjustable arm 80 or 110 sweep Motor is not waterproof and is recommended for interior installations only
ORDER NO. 103-32000 80 Sweep - Frame Mount
292
Powers 18" x 18" arm/blade combinations at a sweep set of 80 or less Powers 16" x 16" arm/blade combinations at a sweep set of 110 Factory pre-set sweep of 80 or 110 adjustable to 50, 65, 80 or 110 5/8" diameter shaft Shaft Length: 2-1/2" Fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Adjustable right or left self-parking Coast to park Includes 5 amp fuse and holder (No on/off switch) RF shielded circuitry Maximum current draw: 5 amps Compact size - 6-5/8" L x 3-3/8" W x 2" H Weight: 1.75 lbs. Made in the U.S.A. 3 year warranty ORDER NO. 103-37180 103-37110 Mfr. No. 37180 37110 Description 80 Sweep 110 Sweep
Corrosion-resistant casing Heavy-duty motor with right angle drive Two-speed motor, can be operated as 1 speed Solid brass knurled drive nut with brass and stainless steel drive shaft Adjustable right or left self-parking Coast to park Includes 5 amp fuse and holder Stainless steel fasteners and mounting bracket Use with three-position switch (not included) Maximum current draw: 3.5 amps at peak load Compact size - 7-5/8" L x 4" W x 2" H Not recommended for exterior use 3 year warranty
293
MOTOR
ORDER NO. 103-33004 103-33005 113-10140 113-10160 113-10180 113-10200 113-10240 AFI 2.5
MRV
Single Arm
103-33007 103-33010 Pantograph Arm 103-33032 103-33037
*Max 18" 80, Max 16" @ 110 *All AFI Wiper Blades and Wiper Arms are Stainless Steel Or High Density Polymer *Classic Blade Compatibility (33901-33919) - Hook and Catch style wiper blades are specifically designed for blade replacement on boats manufactured before 1990
All AFI deluxe wiper arms come with an articulating feature which allows the arm to lock into position when it is bent back for window washing.
294
ORDER NO. 103-33004 103-33005 Stainless steel Works well on curved or flat windshields
Description/Size POLYMER WIPER BLADES Black glass poly-impregnated construction Marine-grade rubber squeegee ORDER NO. 113-10140 113-10160 113-10180 113-10200 113-10240 Mfr. No. 31014B 31016B 31018B 31020B 31024B Description 14" Blade 16" Blade 18" Blade 20" Blade 24" Blade
295
856-30100
DESCRIPTION Motor Kit, 90/110 12V w/arm & Blade Arm Stainless 10-1/2-14" for Std. Motors Motor Only, 2-1/2" Shaft, 12 volt 856-39617 856-31001
REPLACEMENT PARTS
DESCRIPTION Blade, Deluxe Ultra 11" Blade, Deluxe Ultra 12" Blade, Deluxe Ultra 14" Blade, Deluxe Ultra 16" Blade, Deluxe Ultra 18" Blade, Deluxe Ultra 20" Blade, Deluxe Ultra 22"
DELUXE ULTRA BLADES
296
Mfr. No.
Description
Motor, HD 12V 1-1/2" Shaft Motor, HD 12V 2-1/2" Shaft Motor, HD 12V 3-1/2" Shaft Motor, HD 24V 1-1/2" Shaft Motor, HD 24V 2-1/2" Shaft Motor, HD 24V 3-1/2" Shaft
297
ELECTRIC HORNS
All AFI electric horns exceed NMMA/ABYC specifications for vessels up to 12 meters.
ORDER NO. 101-10035 Mfr. No. 10035. - Maximum amp draw: 3 Amps, 12 Volt - db(A) rating: 106 at 1 metre - Fundamental frequency: 440 20Hz
Description Mini Hidden Horn (Bulk/Ea) Mini Hidden Horn (Retail Pkg)
298
TRUMPET HORNS
TRUMPET HORNS
COMPACT SINGLE TRUMPET ELECTRIC HORN
100% stainless steel exterior Type 304 stainless steel diaphragm 14''L x 3-1/2''W x 4''H Full trumpet sound with compact size Requires only one mounting bracket Recommended for saltwater use Ideal for runabouts Mfr. No. 10010
ORDER NO. 102-10010
- Maximum amp draw: 3.5 Amps, 12 Volt - db(A) rating: 108 at 1 metre - Fundamental frequency: 460 15Hz
- Maximum amp draw: 7 Amps, 12 Volt - db(A) rating: 110 at 1 metre - Fundamental frequency: 460 15/415 15Hz
FULLBLASTTM AIRHORN
Corrosion resistant brass construction, with chrome plated finish CE listed compressor Non-corrosive Lexan diaphragm Meets ABYC A.23 and NMMA type accepted
Amps 4 8
DB 120 120
Meet ABYC standard A-23, NMMA type accepted #748520(430520), & #748510(430510) for use on vessels under 39'
299
TRUMPET HORNS
STAINLESS STEEL HORNS All Stainless Steel Inside & Out
304 Stainless Steel inside and out including the sealed sound unit No rust Guaranteed for 5 Years US Patent #6,349,142 All meet ABYC A-23 for boats up to 12 meters PN 10028 & 12428 meet ABYC A-23 for boats up to 20 meters Pre-wired Fits existing hole patterns Much louder than competitive models
Model 10027/12427
Description Single Trumpet S/Steel 12 Volt SS Single Trumpet Horn 24 Volt Dual Trumpet S/Steel 12 Volt SS Dual Trumpet Horn 24 Volt
Specifications: Mfr. No. Volts 10027 12427 10028 12428 12V 24V 12V 24V
Dimensions 16-1/2"L x 4"W x 4-3/4"H 16-1/2"L x 4"W x 4-3/4"H 18-1/2"L x8"W x 5"H 18-1/2"L x8"W x 5"H
Model 10028/12428
Description Shorty Single Trumpet Horn, 12V Shorty Dual Trumpet Horn, 12V
Model 10009
Model 10012
300
COMPACT HORNS
STAINLESS STEEL HORNS All Stainless Steel Inside & Out
304 Stainless Steel inside and out including the sealed sound unit No rust Guaranteed for 5 Years US Patent #6,349,142 All meet ABYC A-23 for boats up to 12 meters Pre-wired Fits existing hole patterns Much louder than competitive models
Model 10002
Model 10036
Description SS Mini Drop-In Horn Lo Pitch SS Mini Drop-In Dual Hi & Lo Pitch
301
NAVIGATION LIGHTS
HORIZONTAL MOUNT BI-COLOUR LIGHTS
CERTIFIED FOR USE ON POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH Chrome plated bronze top with black polymer base One piece lens/base assembly Gold plated contacts Includes mounting gasket USCG certified 2nm CE certified
ORDER NO. 621-02290 621-00712
Mfr. No. 0229DP0CHR 0071DP0CLR Description Light (ea) Spare Bulbs (2 card)
Fig. 0229
Chrome plated zinc alloy top with black polymer base Gold plated contacts USCG certified 2nm CE certified
ORDER NO. 621-02270 621-00712
Mfr. No. 0227DP0CHR 0071DP0CLR Description Light (ea) Spare Bulbs (2 card)
12 Volts Length 3-1/4 - Width 2-5/16 Vertical Height 5/8 Screw Size #8
Fig. 0227
All black polymer Gold plated contacts USCG certified 2nm CE certified
ORDER NO. 621-02520 621-00712 621-02470
Mfr. No. 0252BB0DP1 0071DP0CLR 0247DP0LNS Description Light (ea) Spare Bulbs (2 card) Spare Lens Set Red / Green
12 Volts Length 3-1/2 - Width 2-1/4 Vertical Height 13/16 Screw Size #8
Fig. 0252BB
CERTIFIED FOR USE ON POWER DRIVEN VESSELS UNDER 12 METERS (39.4 FT) IN LENGTH Chrome plated zinc alloy top with black polymer base USCG certified 1nm CE certified
ORDER NO. 621-13100 621-00712 621-02830
Mfr. No. 1310DP0CHR 0071DP0CLR 0283DPALNS Description Light (ea) Spare Bulbs (2 card) Spare Lens Set Red / Green
Fig. 1310
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 12 METERS (39.4 FT) IN LENGTH Chrome plated brass with black polymer base USCG certified 1nm CE certified
ORDER NO. 621-09720 621-00712 621-02960
Mfr. No. 0972DP0CHR 0071DP0CLR 0296DP0LNS Description Light (ea) Spare Bulbs (2 card) Spare Lens Set Red / Green
Fig. 0972
CERTIFIED FOR REPLACEMENT USE ONLY ON POWER DRIVEN VESSELS UNDER 12 METERS (39.4 FT) Chrome plated zinc alloy with flag staff socket A-16 replacement only CE certified I.D. socket 3/4 1 mile visibility
ORDER NO. 621-12180 621-00712 621-02590
Mfr. No. 1218DP0CHR 0071DP0CLR 0259DPALNS Description Light (ea) Spare Bulbs (2 card) Spare Lens Set Red / Green
12 Volts Base Dimensions: 6-3/4 x 3-7/8 Vertical Height 1-5/8 Screw Size #8
Fig. 1218
NOTE: All of the above can be used as 24-volt A.B.Y.C. A-16 certified lights on boats built prior to 11/1/03. To use as 24-volt lights while maintaining A-16 certification, replace the bulbs provided with Order No. 621-07212 24-volt bulbs.
302
NAVIGATION LIGHTS
HORIZONTAL MOUNT SIDE LIGHTS
CERTIFIED FOR USE ON POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH Chrome plated bronze top with black polymer base One piece lens/base assembly Gold plated contacts Includes mounting gasket USCG certified 2nm CE certified
ORDER NO. 621-02320 621-00712
Mfr. No. 0232DP0CHR 0071DP0CLR Description Sidelights (Pair) Spare Bulbs (2 card)
Fig. 0232
Chrome plated zinc alloy top with black polymer base Gold plated contacts USCG certified 2nm CE certified
ORDER NO. 621-02280 621-00712
Mfr. No. 0228DP0CHR 0071DP0CLR Description Sidelights (Pair) Spare Bulbs (2 card)
12 Volts Length 3-1/4 - Width 2-5/16 Vertical Height 5/8 Screw Size #8
Fig. 0228
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 12 METERS (39.4 FT) IN LENGTH Chrome plated brass with black polymer base USCG certified 1nm CE certified
ORDER NO. 621-09630 621-00712 621-02810
Mfr. No. 0963DP0CHR 0071DP0CLR 0281DPALNS Description Sidelights (Pair) Spare Bulbs (2 card) Spare Lens Set (Red/Green)
Fig. 0963
CERTIFIED FOR REPLACEMENT USE ONLY ON SAIL OR POWER DRIVEN VESSELS UNDER 12 METERS (39.4 FT) IN LENGTH Chrome plated brass with black polymer base 1 mile visibility
ORDER NO. 621-09150 621-00712 621-02810
Mfr. No. 0915DP0CHR 0071DP0CLR 0281DPALNS Description Sidelights (Pair) Spare Bulbs (2 card) Spare Lens Set (Red/Green)
12 Volts Length 4-1/4 - Width 2-3/8 Vertical Height 7/8 Screw Size #4
Fig. 0915
12 Volts Length 4-1/4 - Width 2-3/8 Vertical Height 5/8 Screw Size #4
NOTE: All of the above can be used as 24-volt A.B.Y.C. A-16 certified lights on boats built prior to 11/1/03. To use as 24-volt lights while maintaining A-16 certification, replace the bulbs provided with Order No. 621-07212 24-volt bulbs.
Fig. 0955
303
NAVIGATION LIGHTS
2 MILE
Quasar lights are intelligently planned for easier installation, maintenance, and efficient light output. For use on boats up to 65.6 ft. (20 meters).
Smooth contour prevents lines from snagging on housing Lens resin colour (red/green) tuned to maximum sensitivity of the human eye for optimum visibility Single external stainless steel lock screw attaches cover to base, permits easy disassembly for servicing Available in black or chrome Compact size
Stainless steel electrical contacts will not corrode Incl: 8-watt festoon bulb & waterproof mounting gasket USCG certified 2nm Footprint: 3"L x 2-1/4" W Height: 1-7/16" 7" hard wire leads for connection to 12 V DC power supply
912-40600
Replacement Cover
ORDER NO. 912-39202 912-40600 912-39302 912-40700 912-39402 912-40800
Cover Colour
Black Chrome Black Chrome Black Chrome
Replacement Lens
ORDER NO. 912-40100 912-40100 912-40200 912-40200 912-40300 912-40300
912-40800
Visibility, Style and Durability Clean, contoured shape blends in well making the light less noticeable, providing an integrated look with the boat Choice of cover colours includes black, white and 316 stainless steel Rugged stainless steel internal components for corrosion-free performance 2 Nautical Mile output for boats to 20 meters (65.6 ft.) In full compliance with the latest industry and USCG requirements Contoured shape to prevent lines from snagging on the light 7" Tinned wire leads makes it easier to create a permanent, corrosion-resistant USCG certified 2 nm Black
ORDER NO. Mfr. No. Finish Lens Colour 103-38301* 3830G7 Black Green 103-38302* 3830R7 Black Red 103-38341* 3834G7 White Green 103-38342* 3834R7 White Red 103-38381* 3838G7 Stainless Steel Green 103-38382* 3838R7 Stainless Steel Red * Each sidelight provides 112.5 visibility for a combined 225 visibility
White
Stainless Steel
304
NAVIGATION LIGHTS
1 MILE
Twist/bayonet lock design secures lens and cover to base. Includes a 9-watt (#906),wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Installs directly to deck with two #10 fasteners. Cover and lens conceal installation fasteners and seal water out of lamp and hull. For use on boats up to 39.4 ft. (12 meters). USCG certified 1 nm.
912-09104 - Green Lens & Cover 912-09102 - Red Lens & Cover 912-09100 - Red/Green Lens & Cover
305
LED LIGHTING
LED NAVIGATION LIGHTING
LED STAINLESS STEEL SIDE LIGHTS
Lowest power draw of any bow light on the market today! Proprietary optics design draws only 2.4 watts at 12VDC. These lights are designed to resist corrosion in even the most extreme saltwater environments. Lights are completely sealed and are watertight. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. 10-year warranty. 7" wire lead. Base dimensions: 3"L x 2.3"W. 12VDC.
ONE-MILE LIGHTS
For use on boats up to 39.4 ft. in length Description Mfr. No. ORDER NO. 1-NM Bi-Color Light 3520-7 103-35207 1-NM Port Sidelight (Red)) 103-35307-1 3530R7 1-NM Starboard Light (Green 103-35307-2 3530G7
TWO-MILE LIGHTS
For use on boats up to 65.6 ft. in length ORDER NO. Mfr. No. Description 103-35407 3540-7 2-NM Bi-Color Light 103-35507-1 3550R7 2-NM Port Sidelight (Red) 103-35507-2 3550G7 2-NM Starboard Light (Green)
LED Straight Pole Light with Articulating Head Mfr. No. Pole Length 5530-24-7 24" 5530-36-7 36" 5530-42-7 42" 5530-48-7 48"
306
Description 4" Round, White LED 2.75" Round, White LED 1.5" Round, White LED
6341SS7
NAVIGATION LIGHTS
PLUG-IN POLE LIGHTS
Attwood offers a selection of durable stowaway pole-mounted lights. Plug-in Pole Lights are available in socket styles to fit almost any base Attwood's 2- & 3-pin bases, or even competitive brands of bases when the 2- or 3-pin Locking Collar pole is specified.
105-50910
Pole Length 10
Base included
Attwood's Anti-Glare Lights are a great improvement - they focus light at the horizon and above, not in the pilot's eyes. The bottom aperture reduces glare at 7.5 below horizontal. Above horizontal, the continuous arc of light makes the boat more visible to taller craft. The patented Articulating Head adjusts from 15 forward to 15 aft. Just align to the horizon and tighten the adjustment screw! Simplifies inventory because one light fits most angles and installations. Simplifies installation, too, because the Universal Locking Collar pole fits 95 percent of existing bases - Attwood Shines on horizon and above-Not in drivers eyes models as well as competitive bases such as Perko brand. Articulating Head Style ORDER NO. Mfr. No. Description Pole Length Base not included 105-33042 5330-42-7 2-Pin Locking Collar Pole 42 - Pole only 105-33048 5330-48-7 2-Pin Locking Collar Pole 48 - Pole only
7100B7 7100C7
36 All-Round Light
Standard 2- Pin Pole Universal Fit With Locking Collar
Mfr. No. 5110-24-7 5110-30-7 5110-36-7 5110-42-7 5110-48-7 911339-7 91020-7 91022-7 910836B 91017B1 520906
Description 24 Pole with Locking Collar 30 Pole with Locking Collar 36 Pole with Locking Collar 42 Pole with Locking Collar 48 Pole with Locking Collar ZAMAK Base Sub-Assembly Black Round Base, 2-Pin Black Oval Base, 2-Pin Replacement Socket Only Replacement Globe Only Replacement Bulb
2-Pin Standard
307
7.5"
NAVIGATION LIGHTS
For older-style boats, this light features a die-cast Zamak base with locking knob that allows pole to be lowered to the gunwale when not in use. Includes one 12-watt lamp. Has three countersunk holes for #10 fasteners. Note: Adequate clearance is required below deck for pole when lowered. Frosted Globe Lens. Two-mile visibility, 360. USCG certified 2 nm.
Description 24 Telescoping Pole Light 30 Telescoping Pole Light Replacement Globe Only Replacement Bulb
7101A7
5610-48-7
Mfr.No. 5610-48-7
Anti-Glare
Frosted Globe
Anti-Glare
Horizontal Mount
Vertical Mount
308
NAVIGATION LIGHTS
REMOVABLE BI-COLOUR POLE LIGHTS
Removable bi-colour lights are ideal for boats with casting decks on the bow. Unlike conventional bi-colour lights that can stand as high as 2" above the deck, removable bi-colour lights can be unplugged and stowed while fishing. This leaves only a small flat-topped base. Longer lengths are designed for larger trolling motors.
SPARE PARTS Spare Bulbs (2 per card) Spare Lens Set (Red/Green) Mounting Base
Pole Rake 0
Volts 12
Fig. 1612 ORDER No. 621-16121 Locking Collar Pole Note: Bases sold separately
Note: Fig. 1612 meets USCG requirements for 12-volt applications. Can also be used as 24-volt A.B.Y.C. A-16 certified lights on boats built prior to 11/1/03. To use as 24-volt lights while maintaining A-16 certification, replace the bulbs provided with Order No. 621-07212 24-volt bulbs.
Pole Rake 0
Volts 12 Fig. 1211 ORDER No. 621-12111 0 Rake Locking Collar Pole Note: Bases sold separately
SPARE PARTS Spare Bulbs (2 per card) Spare Lens Set ( Red/Green Lens) Spare Bulb for Utility Light Mounting Base (3 contact)
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH Black polymer top and locking collar with red and green lenses 3/4" diameter anodized aluminum tube Deck illuminating utility light Stow-a-way plug-in type pole Requires 3 pin mounting base USCG certified 2nm CE certified
ORDER NO. 621-14211 ORDER NO. 621-00712 621-02410 621-64002 621-10453
Pole Rake 0
Volts 12 Fig. 1421 ORDER No. 621-14211 0 Rake Locking Collar Pole Note: Bases sold separately
SPARE PARTS Spare Bulbs (2 per card) Spare Lens Set (Black top with welded Red/Green Lens) Spare Bulb for Utility Light Spare Mounting Base (3 contact)
309
NAVIGATION LIGHTS
WHITE ALL-ROUND LIGHTS DELTA SERIES - UNIVERSAL REPLACEMENT REDUCED GLARE DESIGN
CERTIFIED FOR USE ON POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH A reduced glare globe preserves night vision while under way. Adjustability of the globe allows for proper horizontal alignment regardless of base configuration. Fig. 1470 Delta's combination of features put it in a class by itself - no other pole light system offers more. 2 globes - reduced glare and full output Black polymer top with clear fluted lens 2 collars - threaded and locking 3/4" diameter anodized pole 2 screw positions 12 volt bulb (included) Wide 40 adjustable head USCG certified 2nm Gold plated contacts CE certified Fig. 1451 Designed to also fit most other manufacturers' bases
ORDER NO. 621-14704 621-14705 621-14706 621-14516 621-14517
Mfr. No. 1470DP4CHR 1470DP5CHR 1470DP6CHR 1451DP6CHR 1451DP8CHR Pole Length 36" 42" 48" 48" 60" Type Straight Pole Straight Pole Straight Pole Fold-in-Half Pole Fold-in-Half Pole
SPARE PARTS
Spare Bulbs (2 per card) Spare Lens Assembly 3 Globe Assortment (1 ea. 0238, 0239 & 0239CLR globes)
ORDER NO. 621-03382 ORDER NO. 621-02390 ORDER NO. 621-00301
Pole rake 0 3/4" diameter anodized pole USCG certified 2nm CE certified
Fig. 1400
SPARE PARTS
Spare Bulbs (2 per card) White Translucent Globe
ORDER NO. 621-37012 ORDER NO. 621-02013
No. of Pins 2 2 2 2 2
621-10460
Finish Chrome Brass/Black Chrome Brass Chrome Zinc/Black Chrome Zinc/Black Chrome Brass/Black
310
NAVIGATION LIGHTS
INLAND SERIES REDUCED GLARE WHITE ALL-ROUND POLE LIGHTS
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH The original "Reduced Glare" light, this design helps preserve night vision. In addition, since the amount of light wasted outside of the visibility zone is greatly reduced, this light does not attract as many bugs. Stow-a-way plug-in pole Clear fluted globe Black polymer top Contemporary styling Gold plated contacts USCG certified 2nm CE certified 12 Volt bulb (included) 3/4" diameter anodized pole 5 pole rake
Fig. 1445 No. 621-14454 5 Rake Locking Collar Pole Note: Bases sold separately
SPARE PARTS Spare Bulbs (2 per card) Lens Assembly 3 Globe Assort.(1 ea. 0238, 0239, & 0239 CLR) Mounting Base for Fig. 1445 Mounting Base for Fig. 1445
Volts 12 12
Screw Size #8 #8
Volts 12 12
Screw Size #8 #8
Fig. 1284
621-03381 621-10541 621-10542 621-11440
Fig. 1634
621-03382 621-10520 621-10522 621-11440
Fig. 1637
621-03382 621-10540 621-10542 621-11440
311
NAVIGATION LIGHTS
FOLD-DOWN COMBINATION MASTHEAD/WHITE ALL-ROUND LIGHTS
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH Black polymer and chrome plated zinc alloy top Black polymer base 3/4" diameter anodized pole 12 Volt bulb included USCG certified 3nm CE certified
ORDER NO. 621-11810 621-11840 Mfr. No. 1181DP0CHR 1184DP0CHR Volts 12 12 Vertical Height 12-13/16 12-13/16 Screw #8 #8 Base Mount Fig. 1184 Fig. 1181
Horizontal Vertical
NO. NO. NO. NO. NO. NO. NO. 621-00712 621-02783 621-11581 621-10521 621-10522 621-10541 621-10542
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER Spare Lenses (2 per card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER Spare Top and Cap with Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER Spare Old Style Zinc Bracket with Knob and End Plug for Fig. 1181 . . . . . . . . . . . . . . . .ORDER Spare New Style Plastic Bracket with Knob and End Plug for Fig. 1181 . . . . . . . . . . . . .ORDER Spare Old Style Zinc Bracket with Knob and End Plug for Fig. 1184 . . . . . . . . . . . . . . . .ORDER Spare New Style Plastic Bracket with Knob and End Plug for Fig. 1184 . . . . . . . . . . . . .ORDER
Note: Figs. 1181 & 1184 meet the USCG requirements for 12 & 24 volt applications. To use Figs. 1181 & 1184 as 24-volt lights, replace the bulbs provided with Order No. 621-07212
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . ORDER NO. 621-00712 Spare Lenses (2 per card) . . . . . . . . . . . . . . . ORDER NO. 621-02783 Spare Top Cap with Screw. . . . . . . . . . . . . . . ORDER NO. 621-11581
Note: Fig. 1196 meets the USCG requirements for 12 & 24 volt applications. To use Fig. 1196 as 24-volt lights, replace the bulbs provided with Order No. 621-07212
Fig. 1196
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . .ORDER NO. 621-00712 Spare Lenses . . . . . . . . . . . . . . . . . . . . . . . .ORDER NO. 621-02783 Base with socket assembly . . . . . . . . . . . . . .ORDER NO. 621-11250
Note: The above lights meet the USCG requirements for 12 & 24 volt applications. To use as 24-volt lights, replace the bulbs provided with Order No. 621-07212
312
NAVIGATION LIGHTS
WHITE ALL-ROUND POLE LIGHT & BASE COMBINATIONS
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH
Mounting base and 12 volt bulb included 3/4" diameter anodized pole USCG certified 2 nm CE certified
Vertical Height Screw Size 21-7/8 #8 28-1/2 #8 NO. NO. NO. NO. NO. 621-37011 621-02482 621-12090 621-00242 621-01251 Base Dimensions 3-3/8 X 2-1/4 3-3/8 X 2-1/4
Mounting Base included Fig. 1209
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . ORDER Spare Globe . . . . . . . . . . . . . . . . . . . . . . . . . . ORDER Spare Base & Socket . . . . . . . . . . . . . . . . . . . ORDER Spare Bulb & Socket . . . . . . . . . . . . . . . . . . . ORDER Spare Cap for Base . . . . . . . . . . . . . . . . . . . . ORDER
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . ORDER NO. 621-37012 Spare Globe . . . . . . . . . . . . . . . . . . . . . . . . . . ORDER NO. 621-02013 Spare Base. . . . . . . . . . . . . . . . . . . . . . . . . . . ORDER NO. 621-10591
12 volt bulb included USCG certified 2 nm CE certified Volts 12 12 Vertical Height 14 14 Screw Size #8 #8 Base Mount Horizontal Vertical Base Dimensions 2" x 1-1/2" 2-1/4" x 5/8"
NO. NO. NO. NO. NO. 621-37012 621-10520 621-10522 621-10540 621-10542
Fig. 1137
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER Spare Old Style Zinc Bracket with Knob and End Plug for Fig. 1134 . . . . . . . . . . . . . . . .ORDER Spare New Style Plastic Bracket with Knob and End Plug for Fig. 1134 . . . . . . . . . . . . .ORDER Spare Old Style Zinc Bracket with Knob and End Plug for Fig. 1137 . . . . . . . . . . . . . . . .ORDER Spare New Style Plastic Bracket with Knob and End Plug for Fig. 1137 . . . . . . . . . . . . .ORDER
Fig. 1134
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . ORDER NO. 621-37011 Spare Globe . . . . . . . . . . . . . . . . . . . . . . . . . . ORDER NO. 621-02482
313
Fig. 1045 P00 - Fits Figs. 1211*, 1400, 1421*,1451, 1470 & 1612 Series Fig. 1059 P00 - Fits Figs. 1400, 1451, & 1470 Series Fig. 1060 PB0 - Fits Figs. 1212*, 1400, 1422*, & 1470 Series Locking Collar is Included with Base To Allow Interchangeability with Discontinued Style Bases. Length Width Insert Replaces PERKO NO. Tube Angle Overall Overall Type Old Number ORDER NO. Degree None 1023 P00 CHR 1045 P00 DP 621-10450 0 2-1/4" O.D. 3-3/4" 1-5/8" None 1330 000 99A 1059 P00 DP 621-10590 16 3-3/4" 1-5/8" None 1026 P00 CHR 1059 P00 DP 621-10590 16 3-3/4" 1-3/4" Black 1027 PB0 CHR 1060 PB0 DP 621-10600 5 3-3/4" 1-3/4" Teak** 1027 PT0 CHR 1060 PB0 DP 621-10600 5 **Specify 3-Contact Base (e.g., # 621-10453 for Fig. 1211 & 1421 or # 621-10603 for Fig. 1212 & 1422) **Teak Insert Bases No Longer Available, Substitute Black Insert Bases.
Overall Length 621-10460 1046P00DP 3-1/2 621-10473* 10473B0DP 3-1/2 *3 Contact Base
Tube Angle 5 0
ORDER NO.
Mfr. No.
Tube Angle 16 16
FOLD-DOWN BRACKETS
FOR WINDSHIELD MOUNT LIGHTS - Complete with Knob and End Plug
621-10521
621-10522
621-10541
621-10542
Fold-Down, Adjustable Angle Mounting Base With Plastic Adapter for V or Flat Mounting Surfaces. Contains Notch for Through Base Wiring Horizontal Mount / Fit Fig. 1181 & 1281 Overall Length: 2, Overall Width: 1-1/2 ORDER NO. 621-10522 - Black Polymer ORDER NO. 621-10521 - Chrome Plated Zinc Alloy Vertical Mount / Fit Fig. 1184 & 1284 Overall Length: 2-1/4, Overall Width: 5/8 ORDER NO. 621-10542 - Black Polymer ORDER NO. 621-10541 - Chrome Plated Zinc Alloy
ADJUSTABLE ANGLE
with PLASTIC ADAPTERS for V or FLAT MOUNT
Locking Collar is included with Base to Allow Interchangeability with Discontinued Style Bases. Overall Length: 3-3/4", Overall Width: 1-5/8" Insert Type: None, Tube Angle: 16 degrees Replaces: Old # 1156 00 CHR & # 1026 T00 CHR (Mfr. # 1059 T00 DP) ORDER NO. 621-10591
Fig. 1052 - Horizontal Mount - Fits Fig. 1134 & 1634 Overall Length: 2", Overall Width: 1-1/2" ORDER NO. 621-10520 (Mfr. # 1052 DP CHR) Fig. 1054 - Vertical Mount - Fits Fig. 1137 & 1637 Overall Length: 2-1/4", Overall Width: 5/8" ORDER NO. 621-10540 (Mfr. # 1054 DP CHR)
314
FIG. 337
FIG. 69, 70, 71 & 72 FESTOON BULBS DOUBLE- ENDED Ordering Information
Nominal Voltage 12 12 12 12 24 32 Wattage Amps 10 10 15 10 10 2 .83 .74 .97 .80 .40 .40 Bulb Dia. 3/8" 3/8" 9/16" 3/8" 3/8" 3/8" Bulb Length 1-5/8" 1-11/16" 1-11/16" 1-1/8" 1-1/8" 1-5/8" PERKO NO. 0069DP0CLR 0070DP0CLR 0070DP1CLR 0071DP0CLR 0072DP1CLR 0070DP2CLR ORDER NO. 621-00692 621-00702 621-07012 621-00712 621-07212 621-07022
SPARE PARTS - LENSES 112-1/2 LENSES FOR BI-COLOR/TRI-COLOR LIGHTS 112-1/2 LENSES FOR SIDE LIGHTS
Ordering Information
Color Height Red/Green 1" Red/Green 1-1/4" Red/Green 1-1/2" *One Piece Lens Width 1-3/4" 1-3/8" 1" PERKO NO. 0283DPALNS* 0296DPOLNS* 0268DPOLNS ORDER NO. 621-02830 621-02960 621-02680 Color Height
Ordering Information
Width PERKO NO. ORDER NO. Red/Green 1" 1-9/16" Red/Green 1-1/4" *Set of 1-Red & 1-Green Lens. 0281DPALNS* 621-02810 0260DPOLNS* 621-02600
Ordering Information
O.D.
Clear 1-1/4" 1-9/16" 2-3/16" Clear 1-1/2" 1" 1-1/4" Clear 1-1/4" 1-9/16" 2-3/16" Clear 2" *Display Pack - 2 Pcs per card **Includes O-Ring. PERKO NO. 0074DPO WHT 0278DPO WHT* 0281DPA WHT 0284DPO CLR** ORDER NO. 621-00743 621-02783 621-02813 621-02840
Fig. No. 74
315
NAVIGATION LIGHTS
COMBINATION MASTHEAD DECK SPREADER LIGHT
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 12 METERS (39.4 FT) IN LENGTH Black Polymer 12 Volt bulb included Vertical surface mount 225 Visibility arc USCG certified 2 nm CE certified
Fig. 0170 BMD ORDER NO. 621-01200
Volts 12
Hgt. Overall 7
Screw #10
Base 1 x 2-5/8
Spare Halogen Bulb for Deck Spreader Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER NO. 621-06812 Spare Bulbs (2 per card) for Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER NO. 621-07012 Spare Lens & Shield Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORDER NO. 621-01201
2 mile visibility A-16 Replacement only CE certified Volts 12 Vertical Hgt. 7/8 Screw #4 O.D. Base 2-3/8
Fig. 964
Spare Bulbs (2 per card) . . . . . . . . . . . . . . . . ORDER NO. 621-00712 Spare Lens (open top style). . . . . . . . . . . . . . ORDER NO. 621-02813
Volts 12
Depth 1-1/2
Screw Size #8
Fig. 939
Spare 12V Bulbs (2 per card) . . . . . . . . . . . . ORDER NO. 621-00702 Spare 32V Bulbs (2 per card) . . . . . . . . . . . . ORDER NO. 621-07022 Spare Lens with Gasket . . . . . . . . . . . . . . . . . ORDER NO. 621-02840
CERTIFIED FOR USE ON SAIL OR POWER DRIVEN VESSELS UNDER 20 METERS (65.6 FT) IN LENGTH Chrome plated brass bezel with black polymer base Flush mount 12 Volt bulb included
ORDER NO. Mfr. No. 621-09460 0946DP112V
Volts 12
Depth 1
Spare 12V Bulbs (2 per card) . . . . . . . . . . . . ORDER NO. 621-00702 Spare 32V Bulbs (2 per card) . . . . . . . . . . . . ORDER NO. 621-07022 Spare Lens with Gasket . . . . . . . . . . . . . . . . . ORDER NO. 621-09469
Fig. 946
316
NAVIGATION LIGHTS
ALL -ROUND LED STERN LIGHTS
For powerboats under 20 meters (65.6 ft) 50,000 hours LED service life Single LED configuration Shock and vibration proof
EXTEND-A-LIGHT MANUAL LED STERN LIGHT ALL-ROUND LED PLUG-IN MOUNT STERN LIGHT
With Chrome Rectangular Base & Wedge
Operates 12 volt DC systems Energy draw 350 milliamps Sealed circuitry Requires 1-3/4" hole Corrosion resistant construction Durable stainless steel telescopic pole Easily installed on new and used boats No change in current switch required Certified ignition protected IMCI certified for ISO #8846 Easy pull-up/down hand operation Patent #5304993, 5398026 20.25" below depth
ORDER NO. 514-12001 516-12001
Operates 9-16 volt DC systems Extends from 2 ft. to 6 ft. Energy draw 180 milliamps Sealed circuitry Easy pull-up/down hand operation Adjustable height Corrosion resistant construction Durable stainless steel telescopic pole Easily installed on new or used boats No change in existing switch required Certified ignition protected MCI certified for ISO #8846
ORDER NO. 512-12007
Polished stainless steel cover Operates 9-16 volt DC systems For powerboats under
20 meters (65.6 Ft.) 50,000 hours of service life Transparent lens Cool to the touch Stainless steel housing Hard wire leads Size 3.45" L x 2.6" W x 1.65" D Mounting hardware included
Stainless steel construction Dimensions: 2-1/2"(L) x 2-5/8"(W) Ultra low profile Vertical Height: 1/2" 12 Volt Screw Size: #8 USCG certified 1nm
ORDER NO. 621-06150
Fig. 0615
Stainless steel construction Dimensions: 2-1/2"(L) x 2-5/8"(W) Ultra low profile Vertical Height: 1/2" 12 Volt Screw Size: #8 USCG certified 1nm
ORDER NO. 621-06160
317
NAVIGATION LIGHTS
3-MILE ANCHOR/MASTHEAD LIGHT WITH CAM-LOCK ADJUSTABLE BASE
3-mile, 360 light visibility for use with on boats up to 65.6ft (20 meters). This redesigned Anchor/Masthead Light is clean and good-looking..
Simple one-piece lens for good looks and water sealing Quick-Release, reliable cam-lock for tilt and adjustment.
Cannot vibrate loose.
Concealed, protected wiring at the base Uses two festoon-style 8-watt lamps Typical installation requires two #10 stainless steel screws
of length suitable for deck or rail material
Will collapse and not break if accidentally hit Includes vertical and horizontal fold-down mounting bases which allow light to swing 180
ORDER NO. Mfr. No. 107-72010* 7201-7 107-72020* 7202-7
Description 12V Fold-Down Anchor/masthead Light 12 12V Fold-Down Anchor/masthead Light 20 *With horizontal and vertical mounts
Use 90% less energy New inner lens design provides market leading performance
and clean projection cut-off angles Multiple mounting options, horizontal & vertical attachment (quick release) Water & shock resistant Features rubber seals, gaskets and booted switches Requires 3 "AAA" batteries per light (not included) Navigational Kit Includes: Red/green LED bow light, white stern light, quick release light mounts, pole, C-clamps, and hardware Mfr. No. 14180-7 14183-7 Colour Grey Camo
101-14180
101-14183
3-1/8"
2"
1-1/4" 2-1/2"
5-1/8" 3-1/8"
1"
4-9/16"
318
639-23400
639-23402
REPLACEMENT BULB 639-90423 90423-7 Side Emitting Bulb, 1-Watt for Series 23 Portables
639-90423
Requires 4 AA Batteries (Not Included) Molded one-piece grey body construction Shock resistant neoprene accents Super-Brite Krypton lamp Dimensions: 6.18"(L) x 2.53"(W)
ORDER NO. 560-16027 560-26007
Sealed heavy-duty on/off switch Insert molded brass threaded mounting bushings Removable lamp carriage assembly 1 Krypton bulb
560-26007
Description Bow Light w/ 2" Stud Mount Inflatable Base with attached Lanyard & Stainless Steel D Ring Stern Light w/ Suction Cup
560-16027
Requires 4 AA Batteries (Not Included) Molded one-piece white body construction Shock resistant neoprene accents Rated at 100,000 hours LED service life Uses 90% less energy than incandescent
Sealed heavy-duty on/off switch Insert molded brass threaded mounting bushings Removable lamp carriage assembly 1 LED Dimensions: 6.18"L x 2.53W
560-11117
560-11127
560-21137
560-21107
Description LED Bow Light w/Universal C Clamp LED Stern Light w/18 Pole & Univ. C & U Clamp Bow Light w/ 2" Stud Mount Inflatable Base with attached Lanyard & Stainless Steel D Ring Stern Light w/ Screw On/Off Suction Cup
319
109-10171
109-02405
105-42471
912-75270
912-02170
320
NAVIGATION LIGHTS
SERIES 22
12" BI-COLOUR POLE LIGHT WITH SIGNAL HORN ALL IN ONE
SERIES 24
BI-COLOUR HIDEAWAY DECK MOUNT BOW LIGHT
12 Volt, Bulb included -10 Watts Base Dimensions: 4-1/2" L x 2-1/2" W x 3" D Housing: Polycarbonate black with aluminum poles Optics: Polycarbonate and stainless steel cap Bi-Colour meets USCG (A-16) 1nm requirement for vessels up to 12 meters Exclusive sound signal base designed for fishing boats with mounted trolling motors Horn meets USCG(A-23) 106-108 db(A) requirements CE
Model No. 22185-7 ORDER NO. 639-22185
Tell-Tale Indicator gives operator a visual indication of the light status Unique hideaway design allows operator to flip over the light when not in use Bi-Colour meets USCG (A-16) requirements for 2nm visibility for vessels up to 20 meters Waterproof switch automatically turns light off when closed 12 Volt - 10 Watts Base Dimensions: 4.3" L x 3" W x 2-1/8" D Stainless steel housing, non corrosive, seawater resistant CE
Model No. 24600-7 ORDER NO.639-24600
SERIES 25 CLASSIC
NAVIGATION LIGHTS WITH STAINLESS STEEL COMPONENTS
For boats under 12m (39 ft.) / (sail or power) 12 Volt, Bulb included Housing: Polycarbonate black, side shields are stainless, shock resistant, non-corrosive, nonmagnetic, seawater resistant Optics: (Fresnel) plastic, shock resistant, seawater resistant; range of visibility 2 nm (Starboard, Port, Bi-Colour 1 nm) Protection: IP 45 Masthead, Stern, All-round 2nm USCG, IMO, CE
Replacement Bulb - 12 Volt - 10 Watts - Model No. 90200-7 ORDER NO. 639-90200 Replacement Bulb - 12 Volt - 20 Watts - Model No. 90470-7 ORDER NO. 639-90470 ORDER NO. 639-25100 639-25200 639-25300 639-25400 639-25404 639-25000 639-25500
Mfr. No.
25100-7 25200-7 25300-7 25400-7 25404-7 25000-7 25500-7
Description
Bi-Colour Light, Black Starboard Light, Black Port Light, Black Masthead Light, Black Combo. Masthead/Foredeck Light, Black All-Round Anchor Pedestal Mount, Black Stern Light, Black
Watts
10W 10W 10W 10W 10W (Masthead) 20W (Foredeck) 10W 10W
Mounting
Side Side Side Side Mast Deck
Model No. 25000-7
Side
SERIES 40
SAILBOAT & STROBE LIGHTS
For vessels under 20 meters Unique Quicfits System for easy dismantling for the purpose of transport and winter storage 12 Volt, Bulb included Housing: Polycarbonate black, shock resistant, non-corrosive, non-magnetic, seawater resistant Optics: (Fresnel) plastic, shock resistant, seawater resistant; range of visibility 2 nm (Strobe 3 nm) Xenon Strobe Protection IP 56 USCG, IMO, BSH, CE
Replacement Bulb 12 Volt - 10 Watt - Model No. 90005-7 ORDER NO. 639-90005 Replacement Bulb 12 Volt - 25 Watt - Model No. 90002-7 ORDER NO. 639-90002 ORDER NO. Mfr. No. Description Watts 639-40600 40600-7 Tri-Colour 25W 639-40606 40606-7 Tri-Colour Quicfits 25W 639-40700 40700-7 Tri-Colour, Anchor Light 25W / 10W 639-40706 40706-7 Tri-Colour, Anchor, Quicfits Light 25W / 10W 639-40806 40806-7 Tri-Colour, Anchor, Strobe, Quicfits Light25W / 10W/8W
321
Watts
4.5W
Vessel Size
4.5W
4.5W(Tricolor) 1.5W(Anchor)
Designed for Powerboats or Sail vessels up to 65 feet (20m) 12V, 1.5 watt Housing: Completely sealed and waterproof - Black EMC tested and certified for radio interference Optics: 2 mile visibility Dimensions: 2-3/4L x 2H x 1-3/4D
639-33202 639-33302 639-33502
STERN LIGHT
639-33502
A 2-9/16
B 2-1/4
C 1
Fastener #10 FH
A C B
A 2-9/16
B 2-1/4
C 1
Fastener #10 FH
C 2-11/16
D 1-11/16
322
NAVIGATION LIGHTS
SERIES 40
TRADITIONAL & ROBUST NAVIGATION LIGHTS
Housing: Polycarbonate black or white, shock resistant, non-corrosive (stainless steel), non-magnetic, seawater resistant 12 Volt, Bulb included 4 ways to mount Optics: (Fresnel) plastic, seawater resistant; range of visibility 2 nm (Masthead (3 nm) Protection: IP 56 USCG, IMO, BSH,CE
Replacement Bulb 12 Volt - 10 Watt - Model No. 90005-7 ORDER NO. 639-90005 Replacement Bulb 12 Volt - 25 Watt - Model No. 90002-7 ORDER NO. 639-90002
ORDER NO. 639-40000 639-40001 639-40100 639-40200 639-40300 639-40400 639-40500 Mfr. No. 40000-7 40001-1 40100-7 40200-7 40300-7 40400-7 40500-7 Description All-Round Anchor Light, Black All-Round Anchor Light, White Bi-Colour Light, Black Starboard Light, Black Port Light, Black Masthead Light, Black Stern Light, Black Mounting Deck Deck Side Side Side Side Side Watts 10W 10W 25W 25W 25W 25W 10W
Model No. 40001-1 Model No. 40000-7
Vessel Size < 20 Meters < 20 Meters < 20 Meters < 20 Meters < 20 Meters < 20 Meters < 20 Meters
SERIES 41
TRADITIONAL & ROBUST NAVIGATION LIGHTS
12 Volt, Bulb included - 25 Watts Housing: Polycarbonate black, shock resistant, non-corrosive, non-magnetic, seawater resistant Optics: (Fresnel) plastic, shock resistant, seawater resistant; easy to change; Range of visibility 2 nm (Masthead 3 nm) Protection: IP55 - Navigational Lights, IP 67 - Foredeck Lights USCG, IMO, BSH, CE Replacement Bulb 12 Volt - 10 Watt - Model No. 90005-7 ORDER NO. 639-90005 Replacement Bulb 12 Volt - 25 Watt - Model No. 90002-7 ORDER NO. 639-90002
ORDER NO. 639-41100 639-41200 639-41300 639-41400 639-41404 639-41500 Mfr. No. 41100-7 41200-7 41300-7 41400-7 41404-1 41500-7 Description Bi-Colour Light, Black Starboard Light, Black Port Light, Black Masthead Light, Black Combo Masthead / Foredeck Light, Black Stern Light, Black Mounting Side Side Side Side Mast Mounting Side Watts 25W 25W 25W 25W 25W (Masthead) 50W (Foredeck)) 10W
Vessel Size < 20 Meters < 20 Meters < 20 Meters < 20 Meters < 20 Meters < 20 Meters
SERIES 80
WATERTIGHT ENGINE ROOM LIGHT
Commercial grade, multipurpose luminaire 12 Volt, 2 x 8W - Dimensions: 15"L x 6.5"W x4"D T16 fluorescent lamp 8W ( not included) Housing: Zinc coated steel sheet, deep drawn, seamless, powder coated white Flexible wiring, heat resistant up to 105C, 221F Protection: IP67 rated Meets requirements for SAEJ1171 for ignition protection
ORDER NO. Mfr. No.
639-10242
10242-1
323
INTERIOR/NAVIGATION LIGHTS
SERIES 16 INTERIOR LIGHTS
LED READING CHART LIGHT
New LED chart light with flexible arm allows for wide range of motion throughout chart table spaces. Equipped with both white and red LED light to maintain night vision. 12V Flexible 12 arm White (9 Watt) and Red (4 Watt) LED light Wall or table mount Housing Colour: Black On/Off switch with 2 wire lead Includes hardware Order No. 639-16500 Mfr. No. 16500-7
639-16500
639-16530
Designed for Sail/Powerboats up to 39 feet (12m) 12V, 5 Watt Incandescent bulb Optics: (Fresnel) Polycarbonate, Shock resistant Visibility 1 nm USCG Certified, IP 45 Protection Housing: Shock resistant, non-corrosive, non-magnetic, seawater resistant, black
Order No. 639-20202 639-20302 Mfr. No. 20202-7 20302-7 Description Side Mount Light, Starboard (Green) Side Mount Light, Port (Red)
639-20040
Designed for Powerboats up to 39 feet (12m) 12V, 5 Watt Incandescent Bulb Optics: (Fresnel) Polycarbonate Visibility 2 nm Pole constructed of durable fiberglass Housing: Shock resistant, non-corrosive, non-magnetic, seawater resistant USCG Certified, IP 45 Protection
Order No. 639-20040 Mfr. No. 20040-7
Designed for Powerboats up to 39 feet (12m) 12V, 10 Watt Housing: Black rigid polycarbonate with stainless steel top Visibility 1nm Optics: Polycarbonate USCG Certified
Order No. 639-22200 639-22300 Mfr. No. 22200-7 22300-7 Description Deck Mount Light, Starboard (Green) Deck Mount Light, Port (Red)
639-22246/420/480
Universal design plug-in all-round pole fits most OEM installed plug-in bases Adjustable head up to 15 to accommodate varying angled bases Designed for Powerboats up to 65 feet (20m) 12V, 10 Watt Visibility 2nm Housing: Black rigid polycarbonate & stainless steel cap with removable aluminum poles Optics: Polycarbonate USCG Certified Mounting: plug-in
Order No. 639-22246 639-22420 639-22480 Mfr. No. 22246-7 22420-7 22480-7 Length 24 42 48
324
NAVIGATION LIGHTS
MASTHEAD LIGHT
Injection Molded Polycarbonate/ Stamped Stainless Steel
STERN LIGHT
Injection Molded Polycarbonate/ Stamped Stainless Steel
A B C MFR. NO.
A B C MFR. NO.
ORDER NO.
424-00001
ORDER NO.
424-00002
Note: NMMA Certified for use on vessels under 39'. NMMA Code 748400 meets ABYC standard A-16.
SIDE LIGHTS
Injection Molded Polycarbonate/ Stamped Stainless Steel
A B C MFR. NO. 2-7/8" 2-3/16" 2-1/8" 400003-1 (PORT) 400004-1(STARBOARD)
ORDER NO.
MFR. NO.
424-00003 424-00004
ORDER NO.
ORDER NO.
424-00005
Note: NMMA Certified for use on vessels under 39'. NMMA Code 748100 meets ABYC standard A-16.
ORDER NO.
424-00140
424-00121
ORDER NO.
424-00150
424-00151
ORDER NO.
424-00165 (PAIR)
424-00161
ORDER NO.
424-00155
One pair includes one starboard (green) and one port (red) Has not been tested to International Standards.
Note: Above lights are not for new construction, use for replacement of existing Lighting.
325
LED LIGHTS
LED FIXED MOUNT ALL AROUND LIGHT
Injection Molded Nylon/Chrome Plated Zinc Approved for USCG 2 NM (Colreg 2 mile). 12 volt DC
ORDER NO. Mfr. No. 424-00010(Ea) 400010-1 A 4" B 2-3/8" C 2-15/16" Fastener #8 FH
326
LED LIGHTING
LED SIDE MOUNT DOCKING LIGHTS 12 Volt DC
Stamped 304 Stainless Sleek design & are super bright Forward and side light sections are wired separately
A C
Sold in pairs
B
A B C
C 3/4"
Fastener #10 FH
A 4-5/16"
B 2-1/4"
C 1-1/8"
Fastener #12 RH
A B C
C B
B C 2-1/2" 9/16"
Fastener #12 RH
ORDER NO. Mfr. No. A 424-00023 Ea 400023-1 9" 424-00026 Ea 400026-1 24"
B 2-7/8" 2-7/8"
C 3-3/8" 3-3/8"
A B C
B 15"
C 6"
ORDER NO. 424-01950 Ea(5) 424-01950-5 Ea(5) 424-01955 Ea(5) 424-01955-5 Ea(5)
Mfr. No.
LED Colour
1-5/8" 1/2" White Display POP-25 Pieces White 1-5/8" 1/2" Red Display POP-25 Pieces Red
327