0 évaluation0% ont trouvé ce document utile (0 vote)
14 vues1 page
Assembly blocks made from scrap help me keep the pieces aligned. These blocks are made from medium density fibreboard (mdf) with intersecting dadoes cut in the middle (pieces of plywood or solid wood would work as well) Just set the work pieces in the blocks or place the blocks on top to hold the pieces in place until the clamps are tight.
Assembly blocks made from scrap help me keep the pieces aligned. These blocks are made from medium density fibreboard (mdf) with intersecting dadoes cut in the middle (pieces of plywood or solid wood would work as well) Just set the work pieces in the blocks or place the blocks on top to hold the pieces in place until the clamps are tight.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Assembly blocks made from scrap help me keep the pieces aligned. These blocks are made from medium density fibreboard (mdf) with intersecting dadoes cut in the middle (pieces of plywood or solid wood would work as well) Just set the work pieces in the blocks or place the blocks on top to hold the pieces in place until the clamps are tight.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
hand to assemble a project. Especially working with large pieces of plywood. To help me keep the pieces aligned, I use assembly blocks made from scrap. I made these blocks from medium density fibreboard (MDF) with intersecting dadoes cut in the middle (pieces of plywood or solid wood would work as well). Just set the work pieces in the assembly blocks or place the blocks on top to hold the pieces in place until the clamps are installed.