Académique Documents
Professionnel Documents
Culture Documents
Guide
Version 4.1
Contents
CHAPTER 1 GETTING STARTED .............................................................. 01-04
GENERAL INFO ................................................................................................................................. 01
DIAL PLAN ................................................................................................................................. 02-03
GATEWAY ACCOUNTS ...................................................................................................................... 04
Page 1
General Info
General information about the SPA Series below:
SIP Account
SPA3102 offer two SIP Account
Line1 (VoIP1),
PSTN Line (VoIP2)
Gateway Account
SPA3102 offer Gateway Accounts
Line1 Gateway 1-4
Dial Plan
SPA3102 offer nine Dial Plans
Line1 Dial Plan(DP0)
PSTN Line Dial Plans(DP1-8)
System Login
Admin Login: ID: admin
User Login:
ID: user
PW: password
PW: password
Reboot
After Submit All Changes prefer reboot the ATA/IP-Phone
http://spa_ address/admin/reboot
http://192.168.1.2/admin/reboot
http://spa_ address:port/admin/reboot
http://192.168.1.2:8080/admin/reboot
Factory Reset for ATA
**** 73738 # Press 1 to confirm, Press * (star) to cancel
Page 2
Dial Plan
The most confusing part of configuring SPA Series is setting the correct dial plan.
Below are the Dial Plan Syntax and some examples.
Dial Plan Syntax
()
[]
Choices number
<:>
Replace number
0-9
0-9 digits
Repetition
S0
Dialing tone
<:@gw0>
<:@gw1>
Gateway 1
<:@gw2>
Gateway 2
<:@gw3>
Gateway 3
<:@gw4>
Gateway 4
Pause
DP1
(<#9:>x.<:@gw0>)
Note
DP2
([2-9]xxxxxxxS0<:@gw0>)
Note
First digit 2-9 + seven digits, immediately dial through the PSTN
Line
DP3
Note
(0086x.S0<:@gw0>)
0086 + any digitsimmediately dial through the PSTN Line
DP4
(<0:0086>1[2-9]xxxxxxxxx<:@gw0>)
Note
Page 3
DP5
(<#1:>x.<:@gw1>|<#2:>x.<:@gw2>)
Note
DP6
(<*1:0123456789>)
Note
DP7
(999!)
Note
DP8
(<10:vpnbest@iptel.org >)
Note
Press 10 default after four seconds and dial the SIP URI
Press 10+# immediately dial the SIP URI
DP9
(<S0:vpnbest@iptel.org >)
Note
Pick up the handset will immediately dial the SIP URI through Line1
DP10
Note
(<#5:>[x*][x*].<:@sipbroker.com>)
#5+*478+1001+#iptel.org echo test
#5+*266+301+#blueface.ie echo test
#5+SIP-Code+UserID+#
SIP-Code List:
http://www.sipbroker.com/sipbroker/action/providerWhitePages
DP11
(P5<:1000>|100xS0|xx.)
Note
Pick up the handset after five seconds will auto dial the number
1000
DP12
L:10,S:5,(100xS0|xx.)
Note
2For user DP
L:10,S:5,(100xS0|xx.)
L:10,(100xS0|xx.)
S:5,(100xS0|xx.)
Page 4
Gateway Accounts
SPA3102/3000 comes with four Gateway Accounts than you can setup multiple
accounts for making outgoing SIP calls on Line 1.
e.g.
Gateway 1iptel
Gateway 2gizmo5
Gateway 4Direct IP Dialing with HTTP Digest Authentication
Line1 >> Gateway Accounts
Gateway 1
: UserID@Proxy
: Proxy
Note:
Gateway Accounts format try Proxy or UserID@Proxy
Gateway 1
: Proxy
Gateway 2
: UserID@Proxy
Page 5
Note:
VoIP Caller Auth Method: none
Page 6
Note:
VoIP Caller Auth Method: PIN
Page 7
7Line1 >> Dial Plan (Using Dial Plan to dial SIP URI)
Dial Plan: (S0:<vpnbest@172.16.1.2:5061>) Pick up handset will immediately dial the SIP URI
Dial Plan: (<852:vpnbest@172.16.1.2:5061>)
Page 8
Page 9
7Line1 >> Dial Plan (Using Dial Plan to dial SIP URI)
Dial Plan: (S0:<vpnbest@119.246.43.171:5060>) Pick up handset will immediately dial SIP URI
Note:
Using the STUN server through the firewall (replace the setp1-2)
If the STUN server failed to respond and all your VoIP connection will failed
immediately.
1Router >> Port Forwarding
Port Forwarding Default SIP Port5060 only
Page 10
Page 11
Note
VoIP Caller Auth Method: HTTP Digest Using HTTP Digest Authentication to access the PSTN Line
VoIP Caller ID Pattern: vpnbest,pstn
Only allow user vpnbest and pstn access the PSTN Line
SPA1001 - Client
Line1 >> Subscriber Information
User ID: vpnbest
Password: xxxxxxxx
SPA3000 - Client
Line1 >> Gateway Accounts
GW1 Auth ID: vpnbest
GW1 Password: xxxxxxxx
Page 12
Page 13
Note:
PSTN Caller Auth Method: PIN
Page 14
Note:
PSTN Caller Auth Method: none
None Authentication
PSTN Access List: 6123457,98765432 Only allow this CID to direct access the PSTN Line
PSTN Answer Delay: 0
For FSK CID standard the CID transmission between first ring and second ring. The ATA need to
0.4s to detect the CID than you will receive a short ringtone.
If you do not want your number to be displayed for a particular call, you can prevent by pressing
"133" before dialing the number.
HongKong-FSK
China-FSK/TDMF
Page 15
Call Forward
PSTN Call Forward to GSM/PSTN or VoIP
PSTN Line >> PSTN-To-VoIP Gateway Setup
PSTN Caller Auth Method: none
PSTN Caller Default DP: 8
Note
After PSTN Answer Delay start to Call Forward
Page 16
Page 17
Location
IP Address
SIP Port
Extension
HongKong Head
Office
172.16.1.2
10500~10501
500,501
172.16.1.3
10502
502
172.16.1.4
10503
503
China Branch
Office
192.168.1.2
10600
600
192.168.1.3
10601
601
Macau Branch
Office
192.168.2.2
10700
700
192.168.2.3
10701
701
Page 18
Network Setup
1.
2.
Create VLAN ID (All new SPA serial are support IEEE 802.1Q tag VLAN)
Configuration the IPSec LAN-to-LAN VPN tunnel with AES 256-SHA1 Auth
HK, create two Dial-In IPSec Profile for China and Macau
3.
CN and MA using the same way block all and pass some IP
Page 19
VoIP Setup
Recommend all Auth-Password using Random Passwords Generate
Location
Description
SIP Port
Extension
HongKong
Head Office
Reception
10500
500
HK-PSTN
10501
501
Manager
10502
502
irI5mUdwaDeN
Sale Dep.
10503
503
iNu9yoDpHFr6
China Branch
Office
Reception
10600
600
siB7eFOpusA6
Sale Dep.
10601
601
So2OpaiNoEx1
Macau Branch
Office
Reception
10700
700
dR7AreGiOs6P
Sale Dep.
10701
701
exI2tEgeRoC1
HongKong PSTN
PSTN Line >> SIP Settings
SIP Port: 10501
Register: no
Auth RD-PW
Page 20
HongKong Reception
Line 1 >> SIP Settings
SIP Port: 10500
Register: no
Password: empty
Note:
HK
CN
MA
Description
Extension
Dial Plan
Reception
500
S0<500:500@172.16.1.2:10500>
HK-PSTN
501
S0<501:501@172.16.1.2:10501>
Manager
502
S0<502:502@172.16.1.3:10502>
Sale Dep.
503
S0<503:503@172.16.1.4:10503>
Reception
600
S0<600:600@192.168.1.2:10600>
Sale Dep.
601
S0<601:601@192.168.1.3:10601>
Reception
700
S0<700:700@192.168.2.2:10700>
Sale Dep.
701
S0<701:701@192.168.2.3:10701>
Using SpeedDial
502@172.16.1.3:10502
Using Personal Directory:
n=HKManager;p=502@172.16.1.3:10502
Page 21
HongKong Manager
Ext 1 >> SIP Settings
SIP Port: 10502
Register: no
Password: irI5mUdwaDeN
Page 22
END
Thank you
Contents
CHAPTER 1 GETTING STARTED .............................................................. 01-04
GENERAL INFO ................................................................................................................................. 01
DIAL PLAN ................................................................................................................................. 02-03
GATEWAY ACCOUNTS ...................................................................................................................... 04
Page 1
General Info
SPA3102/3000 SPA
SIP Account
SPA 2 SIP Account Line1(VoIP1),PSTN Line(VoIP2) VoIP1
VoIP2 AC AC VoIP Answer Delay.
VoIP2 PSTN to VoIP and VoIP to PSTN AC
VoIP Answer Delay 0
Gateway Account
SPA 4 Gateway Account, Line1 Gateway 1-4
Dial Plan
SPA 9 Dial Plan, Line1 Dial Plan(DP0) ,PSTN Line Dial
Plan(DP1-8)
System Login
Admin Login: ID: admin
User Login:
ID: user
PW: password
PW: password
Reboot
Submit All Changes reboot setting
http://spa_ address/admin/reboot
http://192.168.1.2/admin/reboot
http://spa_ address:port/admin/reboot
http://192.168.1.2:8080/admin/reboot
Factory Reset for ATA
Factory Reset
**** 73738 # Press 1 to confirm, Press * (star) to cancel
Page 2
Dial Plan
Dial Plan ATA Dial Plan
Dial Plan
[]
<:>
0-9
0-9
0-9
# / +#
S0
<:@gw0>
<:@gw1>
Gateway 1
<:@gw2>
Gateway 2
<:@gw3>
Gateway 3
<:@gw4>
Gateway 4
Pause
DP1
(<#9:>x.<:@gw0>)
#9+PSTN Line
Note
DP2
Note
DP3
Note
(0086x.S0<:@gw0>)
0086 + PSTN Line
DP4
(<0:0086>1[2-9]xxxxxxxxx<:@gw0>)
Note
"0" "0086"
e.g. 013800138000 008613800138000
DP5
Note
(<#1:>x.<:@gw1>|<#2:>x.<:@gw2>)
#1+GW1#2+GW2
([2-9]xxxxxxxS0<:@gw0>)
2-9+7PSTN Line
DP6
Note
DP7
Note
(999!)
999
DP8
(<10:vpnbest@iptel.org >)
Note
104Line1SIP URIvpnbest@iptel.org
10+#Line1SIP URI
DP9
Note
(<S0:vpnbest@iptel.org >)
Line1SIP URIvpnbest@iptel.org
DP10
Note
Page 3
(<*1:0123456789>)
*1Line10123456789
(<#5:>[x*][x*].<:@sipbroker.com>)
#5+*478+1001+#iptel.org echo test
#5+*266+301+#blueface.ie echo test
#5+SIP-Code+UserID+#
SIP-Code List:
http://www.sipbroker.com/sipbroker/action/providerWhitePages
DP11
Note
DP12
Note
(P5<:1000>|100xS0|xx.)
5Line11000
Line1Iptel5
L:10,S:5,(100xS0|xx.)
Interdigit Timer2
1ATAL=10S=3
Regional >> Control Timer Values (sec)
Interdigit Long Timer: 10
Interdigit Short Timer: 3
2DP
L:10,S:5,(100xS0|xx.)
L:10,(100xS0|xx.)
S:5,(100xS0|xx.)
Page 4
Gateway Accounts
SPA3102/3000 Gateway AccountsGateways
Server Gateways ATA 4 VSP
e.g.
Gateway 1iptel
Gateway 2gizmo5
Gateway 4Direct IP Dialing with HTTP Digest Authentication
Line1 >> Gateway Accounts
Gateway 1
: UserID@Proxy
: Proxy
Note:
Gateway Accounts 2 UserID@Proxy
Gateway 1
: Proxy
Gateway 2
: UserID@Proxy
Page 5
Note:
VoIP Caller Auth Method: none
Page 6
Note:
VoIP Caller Auth Method: PIN
PIN#
IP PIN
Page 7
852
Page 8
Page 9
7Line1 >> Dial Plan (Using Dial Plan to dial SIP URI)
Dial Plan: (S0:<vpnbest@119.246.43.171:5060>) Pick up the phone will immediately dial SIP URI
Note:
STUN server ( setp1-2)
STUN server VoIP STUN server
1Router >> Port Forwarding
Port Forwarding Default SIP Port5060 only
Page 10
Page 11
Note
VoIP Caller Auth Method: HTTP Digest HTTP Digest
VoIP Caller ID Pattern: vpnbest,pstn
Auth-ID User-ID
Auth-PW User-PW
SPA1001 - Client
Line1 >> Subscriber Information
User ID: vpnbest
Password: xxxxxxxx
SPA3000 - Client
Line1 >> Gateway Accounts
GW1 Auth ID: vpnbest
GW1 Password: xxxxxxxx
Page 12
Note:
PSTN Caller Auth Method: PIN
PIN#
Page 13
Note:
PSTN Caller Auth Method: none
133ATA
FSK
FSK/TDMF
Page 14
Call Forward
PSTN Call Forward to GSM/PSTN or VoIP
PSTN Line >> PSTN-To-VoIP Gateway Setup
PSTN Caller Auth Method: none
PSTN Caller Default DP: 8
Note
PSTN Answer Delay
Page 15
Page 16
IP Address
SIP Port
HongKong Head
Office
172.16.1.2
10500~10501
500,501
172.16.1.3
10502
502
172.16.1.4
10503
503
China Branch
Office
192.168.1.2
10600
600
192.168.1.3
10601
601
Macau Branch
Office
192.168.2.2
10700
700
192.168.2.3
10701
701
Page 17
Network Setup
1.
local network:
2.
3.
HK, create two Dial-In IPSec Profile for China and Macau
CN, create Dial-Out IPSec Profile to HongKong, add Macau Network IP
and Netmask into the profile.
MA, create Dial-Out IPSec Profile to HongKong, add China Network IP
and Netmask into the profile.
Page 18
VoIP Setup
Location
Description
SIP Port
Extension
Auth RD-PW
HongKong
Head Office
Reception
10500
500
HK-PSTN
10501
501
Manager
10502
502
irI5mUdwaDeN
Sale Dep.
10503
503
iNu9yoDpHFr6
China Branch
Office
Reception
10600
600
siB7eFOpusA6
Sale Dep.
10601
601
So2OpaiNoEx1
Macau Branch
Office
Reception
10700
700
dR7AreGiOs6P
Sale Dep.
10701
701
exI2tEgeRoC1
HongKong PSTN
PSTN Line >> SIP Settings
SIP Port: 10501
Register: no
Page 19
HongKong Reception
Line 1 >> SIP Settings
SIP Port: 10500
Register: no
Password: empty
Note:
HK
CN
MA
Description
Extension
Dial Plan
Reception
500
S0<500:500@172.16.1.2:10500>
HK-PSTN
501
S0<501:501@172.16.1.2:10501>
Manager
502
S0<502:502@172.16.1.3:10502>
Sale Dep.
503
S0<503:503@172.16.1.4:10503>
Reception
600
S0<600:600@192.168.1.2:10600>
Sale Dep.
601
S0<601:601@192.168.1.3:10601>
Reception
700
S0<700:700@192.168.2.2:10700>
Sale Dep.
701
S0<701:701@192.168.2.3:10701>
Using SpeedDial
502@172.16.1.3:10502
Using Personal Directory:
n=HKManager;p=502@172.16.1.3:10502
Page 20
HongKong Manager
Ext 1 >> SIP Settings
SIP Port: 10502
Register: no
Password: irI5mUdwaDeN
Page 21
END
Thank you
Contents
CHAPTER 1 GETTING STARTED .............................................................. 01-04
GENERAL INFO ................................................................................................................................. 01
DIAL PLAN ................................................................................................................................. 02-03
GATEWAY ACCOUNTS ...................................................................................................................... 04
Page 1
General Info
SPA3102/3000 SPA
SIP Account
SPA 2 SIP Account Line1(VoIP1),PSTN Line(VoIP2) VoIP1
VoIP2 AC
AC VoIP Answer Delay.
VoIP2 PSTN to VoIP and VoIP to PSTN AC
VoIP Answer Delay 0
Gateway Account
SPA 4 Gateway Account, Line1 Gateway 1-4
Dial Plan
SPA 9 Dial Plan, Line1 Dial Plan(DP0) ,PSTN Line Dial
Plan(DP1-8)
System Login
Admin Login: ID: admin
User Login:
ID: user
PW: password
PW: password
Reboot
Submit All Changes reboot setting
http://spa_ address/admin/reboot
http://192.168.1.2/admin/reboot
http://spa_ address:port/admin/reboot
http://192.168.1.2:8080/admin/reboot
Factory Reset for ATA
Factory Reset
**** 73738 # Press 1 to confirm, Press * (star) to cancel
Page 2
Dial Plan
Dial Plan ATA Dial Plan
Dial Plan
[]
<:>
0-9
0-9
0-9
# / +#
S0
<:@gw0>
<:@gw1>
Gateway 1
<:@gw2>
Gateway 2
<:@gw3>
Gateway 3
<:@gw4>
Gateway 4
Pause
DP1
(<#9:>x.<:@gw0>)
Note
#9+PSTN Line
DP2
([2-9]xxxxxxxS0<:@gw0>)
Note
2-9+7PSTN Line
DP3
(0086x.S0<:@gw0>)
Note
DP4
(<0:0086>1[2-9]xxxxxxxxx<:@gw0>)
Note
"0" "0086"
e.g. 013800138000 008613800138000
DP5
(<#1:>x.<:@gw1>|<#2:>x.<:@gw2>)
Note
#1+GW1#2+GW2
DP6
(<*1:0123456789>)
Note
*1Line10123456789
DP7
(999!)
Note
999
DP8
(<10:vpnbest@iptel.org >)
Note
104Line1SIP URIvpnbest@iptel.org
10+#Line1SIP URI
DP9
(<S0:vpnbest@iptel.org >)
Note
Line1SIP URIvpnbest@iptel.org
DP10
(<#5:>[x*][x*].<:@sipbroker.com>)
Note
Page 3
#5+SIP-Code+UserID+#
SIP-Code List:
http://www.sipbroker.com/sipbroker/action/providerWhitePages
DP11
(P5<:1000>|100xS0|xx.)
Note
5Line11000
Line1Iptel5
DP12
L:10,S:5,(100xS0|xx.)
Note
Interdigit Timer2
1ATAL=10S=3
Regional >> Control Timer Values (sec)
Interdigit Long Timer: 10
Interdigit Short Timer: 3
2DP
L:10,S:5,(100xS0|xx.)
L:10,(100xS0|xx.)
S:5,(100xS0|xx.)
Page 4
Gateway Accounts
SPA3102/3000 Gateway AccountsGateways
Server Gateways ATA 4 VSP
e.g.
Gateway 1iptel
Gateway 2gizmo5
Gateway 4Direct IP Dialing with HTTP Digest Authentication
Line1 >> Gateway Accounts
Gateway 1
: UserID@Proxy
: Proxy
Note:
Gateway Accounts 2 UserID@Proxy
Gateway 1
: Proxy
Gateway 2
: UserID@Proxy
Page 5
Note:
VoIP Caller Auth Method: none
Page 6
Note:
VoIP Caller Auth Method: PIN
PIN#
IP PIN
Page 7
852
Page 8
Page 9
7Line1 >> Dial Plan (Using Dial Plan to dial SIP URI)
Dial Plan: (S0:<vpnbest@119.246.43.171:5060>) Pick up the phone will immediately dial SIP URI
Note:
STUN server ( setp1-2)
STUN server VoIP STUN server
1Router >> Port Forwarding
Port Forwarding Default SIP Port5060 only
Page 10
Page 11
Note
VoIP Caller Auth Method: HTTP Digest HTTP Digest
VoIP Caller ID Pattern: vpnbest,pstn
Auth-ID User-ID
Auth-PW User-PW
SPA1001 - Client
Line1 >> Subscriber Information
User ID: vpnbest
Password: xxxxxxxx
SPA3000 - Client
Line1 >> Gateway Accounts
GW1 Auth ID: vpnbest
GW1 Password: xxxxxxxx
Page 12
Note:
PSTN Caller Auth Method: PIN
PIN#
Page 13
Note:
PSTN Caller Auth Method: none
133
ATA
FSK
FSK/TDMF
Page 14
Call Forward
PSTN Call Forward to GSM/PSTN or VoIP
PSTN Line >> PSTN-To-VoIP Gateway Setup
PSTN Caller Auth Method: none
PSTN Caller Default DP: 8
Note
PSTN Answer Delay
Page 15
Page 16
IP Address
SIP Port
HongKong Head
Office
172.16.1.2
10500~10501
500,501
172.16.1.3
10502
502
172.16.1.4
10503
503
China Branch
Office
192.168.1.2
10600
600
192.168.1.3
10601
601
Macau Branch
Office
192.168.2.2
10700
700
192.168.2.3
10701
701
Page 17
Network Setup
1.
local network:
2.
3.
HK, create two Dial-In IPSec Profile for China and Macau
CN, create Dial-Out IPSec Profile to HongKong, add Macau Network IP
and Netmask into the profile.
MA, create Dial-Out IPSec Profile to HongKong, add China Network IP
and Netmask into the profile.
Page 18
VoIP Setup
Location
Description
SIP Port
Extension
Auth RD-PW
HongKong
Head Office
Reception
10500
500
HK-PSTN
10501
501
Manager
10502
502
irI5mUdwaDeN
Sale Dep.
10503
503
iNu9yoDpHFr6
China Branch
Office
Reception
10600
600
siB7eFOpusA6
Sale Dep.
10601
601
So2OpaiNoEx1
Macau Branch
Office
Reception
10700
700
dR7AreGiOs6P
Sale Dep.
10701
701
exI2tEgeRoC1
HongKong PSTN
PSTN Line >> SIP Settings
SIP Port: 10501
Register: no
Page 19
HongKong Reception
Line 1 >> SIP Settings
SIP Port: 10500
Register: no
Password: empty
Note:
HK
CN
MA
Description
Extension
Dial Plan
Reception
500
S0<500:500@172.16.1.2:10500>
HK-PSTN
501
S0<501:501@172.16.1.2:10501>
Manager
502
S0<502:502@172.16.1.3:10502>
Sale Dep.
503
S0<503:503@172.16.1.4:10503>
Reception
600
S0<600:600@192.168.1.2:10600>
Sale Dep.
601
S0<601:601@192.168.1.3:10601>
Reception
700
S0<700:700@192.168.2.2:10700>
Sale Dep.
701
S0<701:701@192.168.2.3:10701>
Using SpeedDial
502@172.16.1.3:10502
Using Personal Directory:
n=HKManager;p=502@172.16.1.3:10502
Page 20
HongKong Manager
Ext 1 >> SIP Settings
SIP Port: 10502
Register: no
Password: irI5mUdwaDeN
Page 21
END
Thank you