Académique Documents
Professionnel Documents
Culture Documents
Router>en
Router>enable
Router#conf
Router#configure t
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#host
Router(config)#hostname Routeur1
Routeur1(config)#interface
Routeur1(config)#interface fa
Routeur1(config)#interface fastEthernet 0/0
Routeur1(config-if)#ip add
Routeur1(config-if)#ip address 192.168.10.1 255.255.255.128
Routeur1(config-if)#no sh
Routeur1(config-if)#no shutdown