Académique Documents
Professionnel Documents
Culture Documents
®
FEATURES
PICMG 1.3
System Host Board x8 PCIe Link
· 14-slot from factor supports PCI-Express™, PCI-X and
USB Connectors
(A2) x8 PCIe
Connector
PCI option cards
(P11 & P12) (PCIe1)
Specifications
12.300
9.426*
8.975 2.525
6.275 2.125
4.150 1.825
3.264* 1.637* * = Pin 1
2.363*
2.075 .800 0.400
.800
USB
P12 0.388*
x8 PCIe Link
1.225*
USB (A0)
PCIe1 PCIe2 PCIe3 PCIe4 PCIe5 PCIe6
SLTA1 SLTA2 SLTA3 SLTA4 SLTB1 SLTB2 1.393*
P11
x8 PCIe 6.325
Link
(A2)
8.900
10.700
PCI Express
Fan Out
x4 PCIe Link Switch x4 PCIe 1
12.900
(B0) Links P22
**Optional USB and Ethernet
connectivity provided by
PCI-X PCI-X 1
PICMG 1.3 SHB. Not all
(64-bit/66MHz) (64-bit/100MHz)
SHBs support this capability.
Nominal PCB thickness: .080”
SHB Slot PCIe to PCI-X Connector spacing: .800” centers
Bridge
P21 To find the center of a PCI-X/PCI option
card connector to the left of the reference dimension
JU4 hole, add 0.150” to the pin 1 location dimension.
P1 1
P9 P7
To find the center of a PCI Express option
P8 P6 card connector and the SHB slot add 0.049” to the
LEDs +3.3V pin 1 location dimension.
+12V
-5V Mounting holes: .156” diameter
-12V
1 1 +5V P2 All dimensions are inches.
Ethernet P14 P13 +5VAux 1
Ports Trenton Hole Pattern
P3 P4 P10 1
®
PICMG 1.3 Hole Pattern
Trenton Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com
PCI-X PARALLEL BUS SLOTS CONNECTING POWER
The six PCI-X slots on the BPX6610 are connected to the SHB via a A new approach is required to connect system power due to the
x4 PCI Express link delivered from the PCI Express fan out switch to combination of new power supply technologies and the soft-
the PCI Express-to-PCI-X bridge chip. The bridge chip provides a 64- power control signals available via the Advanced Configuration
bit/66MHz PCI-X channel to support option card slots SLTA1 through and Power Interface (ACPI). ACPI signals are now supported by
SLTA4 and a 64-bit/100MHz PCI-X channel to support slots SLTB1 PICMG 1.3 SHBs and backplanes. Auxiliary power connectors
and SLTB2. These slots support PCI-X and universal PCI option located on the PICMG 1.3 backplanes now deliver all of the
cards i.e., 5V/3.3V combo or 3.3V only. The bridge chip will throttle- power directly to the edge connectors of the SHB.
down the bus interface speeds to match any universal PCI or PCI-X Auxiliary power connectors on the backplane are provided to help
card with an interface bus speed less than 66MHz or 100MHz. improve system Mean Time To Repair (MTTR). All power can be
OPTIONAL USB 2.0 INTERFACES delivered to the SHB via the board’s edge connectors. Trenton’s
The SHB Express specification defines optional I/O routings from the PICMG 1.3 SHBs and backplane SHB edge connector slots have
SHB to the backplane. Trenton’s BPX6610 takes advantage of this ample power pins available to meet the power demands of high-
new specification feature by providing two USB 2.0 headers capable performance dual-processor SHBs. The ATX/EPS and +12V
of providing up to four USB 2.0 backplane ports. power connectors on the BPX6610 backplane also have an
ample number of power pins available to meet these demands.
OPTIONAL ETHERNET INTERFACES The system designer needs to be aware of the potential power
Trenton’s BPX6610 backplane supports the optional Ethernet routing demands of the entire system, including the particular SHB, to
feature of the SHB Express (PICMG 1.3) specification. Two ensure that both the power supply and the power connectors in
10/100/1000Base-T Ethernet RJ-45 connectors are available for use the cable harness can safely deliver the necessary power to drive
on the backplane. The SHB OPTIONAL BACKPLANE I/O SUPPORT the entire system.
TABLE explains the backplane I/O capabilities supported by Trenton’s Specific implementations of ACPI signals, ATX/EPS power supply
PICMG 1.3 System Host Boards. type and the operating system software will determine the
POWER CONNECTORS specific connection method for the power supply. For example
The BPX6610 backplane is available with low-profile right-angle and the use of the Power Good (PWRGD), Power Supply On
vertical power connectors suitable for use with either an ATX or EPS (PSON#), Five Volt Standby (5VSB) and the Power Button
power supply. (PWRBT#) ACPI or soft power control signals require the
following connection method:
AUXILIARY POWER CONNECTOR
The +12V power connectors on the BPX6610 route auxiliary power to Power Supply
the SHB’s edge connectors. This new capability of PICMG 1.3 PWRGD
Trenton
compliant SHBs and backplanes eliminates the need for auxiliary PSON# PICMG 1.3
power connections on the system host board. Backplane
5VSB SHB Slot
EXTENDED-CURRENT TERMINAL BLOCKS
Two extended-current terminal blocks provide additional power
capacity for power-intensive applications -- up to 80 Amps of +12V, Rtypical = 8.2k W
120 Amps of +3.3V and 80 Amps of +5V.
PWRBT#
POWER INDICATORS Power On
Surface-mount LEDs provide a convenient visual check for +5V, -5V, Switch
Normally Open
+5V AUX,+12V, -12V and +3.3V power connection and status. Momentary
CAUTION: Never install or remove the SHB or any option card from
the BPX6610 backplane if the +5V AUX LED is GREEN. If the system ACPI signal usage is optional and may be turned off using the
appears to be off and the+5V AUX LED is GREEN, you need to SHB’s BIOS and/or signal jumpers. Specific power connections
remove or turn off the incoming power to the system power supply. and BIOS parameters will differ depending on unique system
PRINTED CIRCUIT LAYERS design requirements. Refer to the Appendix B (Power
The backplane is a six-layer, .080” thick board with three separate Connection) and Advanced Setup BIOS sections found in the
signal layers: +5V/+12V, +3.3V and ground. Multi-layer backplane Technical Reference Manual for your specific Trenton system
construction provides excellent noise immunity. host board for more information.
Trenton Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com