Vous êtes sur la page 1sur 9

How to use Chart Assistant with a new license and permits

1. Exit Navi-Sailor and wait for approximately 30 sec 2. Start Chart Assistant for advanced users

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

3. Choose format SENC

4. Insert the USB stick with the new license.

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

5. Push the button License to install the new license.

6. Insert the base disc labeled TADS Base CD 1; 7. Click the Update button, choose CD as the media you wish to install from;

8. Repeat the procedure above with the base TADS Base discs 2, 3, 4, 5, 6, 7, and 8 as well;

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

9. Insert the latest update disc and click Update button for further selection a media from where updates will be installed:

10. Follow the steps given on screen; 11. Change format to S57/SENC:

12. Insert the ENC base disc (the discs numbers are 9 and 10) into CD Rom drive; 13. Click Update button:

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

14. Perform the Scan Disk procedure: 14.1 Select CD:

14.2 Mark Show S57/SENC Disk Content checkbox:

15. Click OK 16. Click License button

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

17. In the appeared window click Install new SA certificate button:

18. Indicate the IHO.CRT certificate which is stored in TADS disc 9 and/or in 10 using the appeared Open window:

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

19. Click Open button; 20. After that another window with information will appear, read that accurately and click OK:

21. The window S57/SENC is still available, click Browse there:

22. Browse the location where permits are stored; 23. Click ok;

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

24. Click Install button to perform the charts installation: 24.1 Make sure that charts at the right table (External Storage) are selected (those check boxes are marked); 24.2 Click Install button:

25. Follow instructions given on screen; 26. Insert the latest ENC update disc available onboard. 27. Click Update

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

28. Choose CD as the media you wish to install from. 29. Follow instructions given on screen. 30. If needed synchronize with other stations. 31. Close Chart Assistant and wait for approximately 30 sec. 32. Run Navi-Sailor!

Transas Marine Ltd. Datavgen 37 SE-436 32 Askim Sweden

www.transasmarine.com TADS@transas.com

Phone Fax 24h service

+46 31 769 56 80 +46 31 69 41 84 +46 705 69 41 80

Vous aimerez peut-être aussi