This pulley was installed, torqued to 89 ft/lb and then bolt removed, leaving the pulley seated.
ASP Group Buy Pulley vs. OEM Pulley fitment
Page 1
ASP Group Buy Pulley vs. OEM Pulley fitment
C35A Brand New OEM Pulley
Measuring on metal surface with Central Tools Verneer depth gauge.
ASP Group Buy Pulley vs. OEM Pulley fitment
Page 2
ASP Group Buy Pulley vs. OEM Pulley fitment
C35A OEM Pulley Measurement reading
~15.85 mm +/- .01 ?
ASP Group Buy Pulley vs. OEM Pulley fitment
Page 3
ASP Group Buy Pulley vs. OEM Pulley fitment
C35A ASP Pulley Seated
This pulley was installed and torqued to 89 ft/lb and bolt removed. The pulley was flush with end of crankshaft so I tapped it in a little more (gently) with a rubber mallet. The picture below shows crankshaft extending out of the pulley by the depth of the crankshaft's beveled edge.
ASP Group Buy Pulley vs. OEM Pulley fitment
Page 4
ASP Group Buy Pulley vs. OEM Pulley fitment
C35A ASP New Pully
Depth Gauge seated on rim and against metal surface