0 évaluation0% ont trouvé ce document utile (0 vote)
124 vues8 pages
Disconnecting Switch (ANSI Std. C37. To C37.35) use to disconnect circuit under no load condition for maintenance purpose. It must disconnect the circuit after circuit breaker operates, and close before circuit breaker close the circuit.
Disconnecting Switch (ANSI Std. C37. To C37.35) use to disconnect circuit under no load condition for maintenance purpose. It must disconnect the circuit after circuit breaker operates, and close before circuit breaker close the circuit.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Disconnecting Switch (ANSI Std. C37. To C37.35) use to disconnect circuit under no load condition for maintenance purpose. It must disconnect the circuit after circuit breaker operates, and close before circuit breaker close the circuit.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
• Use to disconnect circuit under no load condition
for maintenance purpose • It must disconnect the circuit after circuit breaker operates, and close before circuit breaker close the circuit. Type of Disconnecting Switch
1) Single - Break Vertical - Opening
2. Double - Break Horizontal - Opening 3. Center - Break Horizontal - Opening 4. Pantograph works in vertical direction. 1. Fixed Contact 2. Moving Contact 3. Pantograph Point 4. Gear - Box 5. Terminal Surface 6. Post Insulator 7. Rotary Insulator 8. Tubular Steel Structure 9. Drive 5. Grounding or Earthing Switch Installed in line bay for discharging induced current (Static Charge) in line or bus to ground for safety while working with line or long bus
1. Fixed Contact 2. Stop Plate 3. Earth Rod 4. Spring 5. Toggle - Joint 6. Drive 6. Hi - Velocity Interrupter
• It applied isolating switch to
use as interrupter for disconnecting circuit with low current, such as disconnecting of no load transformer. • This case we can not use normal disconnector because of magnetizing current still flows. It can also use to disconnect line dropping.