Académique Documents
Professionnel Documents
Culture Documents
Pattern Book. Each pattern is shaded to make it easier to see where to cut and where not to cut. To navigate from page to page, simply use the vertical scrollbar on the right hand side of the screen, or the Go To buttons located at the top and bottom of the screen. To print, simply click on the Printer Icon at the top of the screen, or choose Print from the File pull-down menu. Be sure to specify which page numbers you want to print, and the number of copies. You can determine the page number from the Page # box 4 of 107 at the bottom of the screen. When finished, click the First Page button to go back to the beginning to choose another section to view.
GREAT AMERICAN PATTERNS TM
Crest
Stock: 1/4 Assemble with #18 x 5/8 finish nails and glue. Top pattern piece. Victorian Display Stand
Crest
Stock: 1/4 Bottom left pattern piece.
Crest
Back
Back
Side
Stock: 1/4", cut 2 Attach to Back and Bottom with glue and #18 x 5/8 finishing nails.
Cut ends at 45
Roof
Stock: 1/4 Cut 2. Glue and nail to Back
Cut ends at 45
Back
Bottom
Stock: 1/4
Roundover 1/4 R
Roundover 1/4 R.
Base
Stock: 1/4 Left pattern piece.
Bottom
Back
Base
Stock: 1/4 Right pattern piece.
Bottom
Back
Nativity Scene
Left Frame
Stock: 1/4" - 3/8"
Nativity Scene
Center Frame
Stock: 1/4 - 3/8
Nativity Scene
Right Frame
Stock: 1/4 - 3/8
Frame
Stock: 1/4 - 3/8 Left pattern piece.
Frame
Stock: 1/4 - 3/8 Right pattern piece.
Bracket
Stock 1/4
Back
Stock: 1/4 Bottom pattern piece. Attach Shelf and Bracket with glue.
Back
Stock 1/4
Shelf
Wildlife Clock
12 9 6 3
Frame
Stock: 3/8
Base
Stock: 3/8
Adjust slot, if necessary, for thickness of material you are using. Secure with glue or silicone.
Victorian Sconce
Back
Stock: 3/4 Top pattern piece.
Victorian Sconce
Back
Stock: 3/4 Bottom pattern piece.
Drill a 1/16 hole to start bevel cut. Cut clockwise with table tilting down to the right at 3 1/2 or cut counterclockwise with table tilting down to the left at 3 1/2.
Roundover front edges 1/4 R. Drill and countersink back side for #9 x 1 1/2 F.H. screws.
Victorian Sconce
In
Victorian Sconce
Shelf
Stock: 3/4"
Anniversary Plate
Note: Use repositionable spray adhesive to attach the pattern to the work pieces. Cut the interior Plate Design and the Rim Design. Use glue or silicone to attach the Rim to the Interior Design. Finish as desired.
Anniversary Plate
Rim Design
Stock: 1/8 - 1/4 Left pattern piece.
Anniversary Plate
Rim Design
Stock: 1/8 - 1/4 Right pattern piece.
Numbers
Stock: 1/16 - 1/4 Secure in place with glue or silicone. Pattern overlap line
Victorian Clock
Assembly Instructions
Assemble by first attaching the Aprons to the End Aprons. Then attach the Base to this assembly and the Bottom to the Base. Next attach the Front and Back to the Sides. Then attach the Roof, Side inserts, and Crest. Next position this assembly over the Bottom and secure in place with glue or silicone. Attach the Rail, and finish as desired.
J A
B
11 12 1 2 3 8 7 6 5 4
10 9
L D I H G
Victorian Clock
Front Back Crest Rail Side Side Insert Base Apron End Apron Roof Overlay Bottom A B C D E F G H I J K L 1 1 1 1 2 2 1 2 2 2 1 1
Stock: 1/4
Rail (D)
Description
Item Qty
Victorian Clock
Victorian Clock
Crest (C)
Stock: 1/4
Victorian Clock
Top
Side (E)
Stock: 1/4, cut 2 Attach to End Aprons with glue and finishing nails Stock: 1/4, cut 2
Apron (H)
Top
Victorian Clock
End Apron
Base (G)
Use glue and #18 x 5/8 finishing nails to attach Base (G) to Aprons.
Bottom (L)
Stock: 1/4
End Apron
Victorian Clock
45 Cut at 45
Roof (J)
Stock: 1/4, cut 2
Front
Cut at 45 45
Overlay (K)
Stock: 1/4
Small Shelves
Back
Stock: 3/8"
Back
Stock: 3/8"
Small Shelves
Shelf
Stock: 3/8"
Attach to Back with glue and #18 x 3/4 finishing nails or countersink for #4 x 5/8 F.H. screws.
Side
Roundover top edges 1/4 R. Pattern overlap line Drill for shaker pegs to hole necklaces Roundover top edges 1/4 R.
Top
Stock: 3/4 Left pattern piece.
Drill and countersink back side to attach Sides with #9 x 1 1/2 F.H. screws.
Top
Stock: 3/4 Right pattern piece.
.
Drill a 1/16 hole to start bevel cut. Cut clockwise with table tilting down to the right at 3 1/2 or cut counterclockwise with table tilting down to the left at 3 1/2.
Side
Earring Holder
Base
Stock: 3/4 Left pattern piece.
Drill and countersink bottom side to attach stiles with #9 x 1 1/2 F.H. screws.
Base
Stock: 3/4 Right pattern piece.
Bar
Bar
Earring Holder
Collapsible Basket
Drill 1/8 pivot hole before sawing basket free. After routing 1/4 R countersink screws.
Drill a 1/16 hole to start bevel spiral cut. Saw at 3 1/2 with table tilting down to the left and using a #9 blade.
.
Frame
Stock: 3/4" Left pattern piece.
Drill & countersink 1/8. Attach pivot foot with #6 x 3/4 F.H. screw.
Roundover 1/4 R.
.
Frame
Stock: 3/4" Right pattern piece.
Collapsible Basket
Drill 1/8 pivot hole before sawing basket free. After routing 1/4R countersink for #6 x 1 1/4 F.H. screws.
Drill a 1/16 hole to start bevel spiral cut. Saw at 3 1/2 with table tilting down to the left using a #9 blade.
.
Frame
Stock: 3/4" Left pattern piece.
Roundover 1/4 R.
1/8 drill & countersink. Attach pivot foot with #6 x 3/4 F.H. screw.
Collapsible Basket
.
Frame
Stock: 3/4" Right pattern piece.
Collapsible Basket
Drill 1/8 pivot hole before sawing basket free. After routing 1/4 R countersink for #6 x 1 1/4 F.H. screws.
Drill a 1/16 hole to start bevel spiral cut. Saw at 3 1/2 with table tilting down to the left and using a #9 Olson blade.
.
Frame
Stock: 3/4" Left pattern piece.
Roundover 1/4 R
1/8 drill & countersink. Attach pivot foot with #6 x 3/4 F.H. screw.
Frame
Stock: 3/4" Right pattern piece.
Friendship Plate
Rim Design
Stock: 1/8 - 1/4 Top left pattern piece.
Enlarging or reducing this pattern will allow you the flexibility of fitting it to the location where you choose to display it. Also, using contrasting woods or stains will produce the most stricking effect.
Friendship Plate
Rim Design
Stock: 1/8 - 1/4 Top right pattern piece.
Dashed line indicates position of Interior Design on back of Rim. Use glue and/or finishing nails to attach Interior Design to the back of the Rim.
Rim Design
Friendship Plate
Interior Design
Stock: 1/4 - 3/8 Left pattern piece.
Interior Design
Corner Shelf Apply a small amount of glue to each side of tabs before assembly.
Shelf
Stock: 1/4, cut 2
Assemble by first inserting the Shelf tabs into one Side. Then attach the remaining Side.
Adjust slots, if necessary for thickness of material used. Corner Shelf Pattern overlap line
Victorian Book Rack First attach the Top and Bottom and Bracket to One Side. Attach the remaining Side.
Attach Top, Bottom and Bracket with glue and #18 x 5/8 finishing nails.
Side
Stock: 1/4, cut 2 Pattern overlap line
Side
B E H
Assemble by first inserting the tabs of pieces B, C, D, E and F into one Side. Secure with glue. Then attach the remaining Side. Next, slide pieces G into place on the front and back of carriage. Finally, attach the Wheels with glue. Note: This carriage can be used for a variety of purposes - fill with candy, silk flowers, hair ribbons, pencils, guest soaps, potpourri. The possibilities are endless - just use your imagination. Fill with special treats for a unique gift basket!
Description Item Qty Side A 2 Floor B 1 Seat C 1 Foot Rest D 1 Axle E 2 Spacer F 1 Front & Back G 1 ea Front Wheel H 2 Back Wheel I 2 Floor (B)
Stock: 1/8
Seat (C)
Stock: 1/8
Spacer (F)
Stock: 1/8
Axle (E)
Stock: 1/8, cut 2
C Side (A)
Stock: 1/8, cut 2
D B
F E
Music Box
Top
1 2
Back
3/4
Foot Instructions
1. Attach pattern with repositionable spray. 1 2. Cut out back shape 3. Cut out the top shape 4. Attach Foot with glue and finishing nails or silicone
3
Back
Assembly Instructions
Assemble by first attaching the Top to the Frame with glue and finishing nails or silicone. Next attach the music box movement to the topside of the Bottom with screws or silicone. Before the silicone sets, be sure to position the Frame over the Bottom to make sure the music box movement is aligned correctly. Then secure the Bottom to the Frame. Next, attach the Feet where indicated, securing with wood glue or silicone. Finish as desired. NOTE: It is important that the music box movement bottom is in contact with the wood (topside of the Bottom) in order to have the best tone. If using silicone, be careful to not use too much as it may squeeze out from between the 2 pieces and get into the movement itself.
Front
Foot
Stock: 3/4, cut 2 Fold on dashed line Rear view
Top view.
Frame
Stock: 1 1/2 Circle indicates position of key.
Note: Top is not intended to be used with a turntable. Secure the Top to the Frame with glue or silicone.
Music Box
Top
Stock: 1/4
Music Box
Bottom
Stock: 1/4 Dashed line indicates position of Frame Small dashed line indicates placement of Foot on Bottom.
12 9 6 3
1/4" R
1/4" R
1/4" 1/4"
Frame
Stock: 3/4" Left pattern piece. Rabbet backside for fretted insert.
3/4"
Frame
Stock: 3/4 Right pattern piece.
Stock: 1/4
Insert
Stock: 1/4"
Insert
Stock: 1/4"
Insert
Base
Stock: 3/4 Left pattern piece.
Base
Stock: 3/4 Right pattern piece.
9 12 6 3
Frame
Stock: 1/4"
Card Bracket
Stock: 1/4, cut 2
Card Bracket
Card Bracket
Base
Stock: 3/4"
9 12 6 3
Base
Frame
Stock: 1/2 - 3/4
Wildlife Lamp
Assembly Instructions
Assemble by first inserting the tabs in the Bottom and Top into one Side containing the 2 slots. Secure with glue. Attach the remaining Side containing the 2 slots. Then slide the remaining Sides into position. Assemble the lamp as per instructions. Finish as desired. Option: use contrasting material behind design if desired. Note: order lamp kit #A243 or #A251 to complete.
Wildlife Lamp
Side
Cut two sides with bottom slots Bottom Cut slots on two Sides only Bottom Cut two sides with bottom slots Stock: 1/4, cut 4
Top
Top
Ornamental Frame
Overlay
Stock: 1/16 - 1/4
Ornamental Frame
Frame
Stock: 1/4 - 3/8 Top pattern piece.
Frame
Stock: 1/4 - 3/8 Bottom pattern piece.
Ornamental Frame
Holiday Plate
Rim Design
Stock: 1/4 Left pattern piece.
Holiday Plate
Rim Design
Stock: 1/4 Right pattern piece. Pattern overlap line
Star
Stock: 1/16 - 1/8
Holiday Plate
Frame
Stock: 1/4 - 3/8
Rockin Reindeer
Side
Stock: 3/4, cut 2 Left pattern piece.
Antler
stock: 3/4, cut 2
Side
Stock: 3/4, cut 2 Right pattern piece.
Rockin Reindeer
Body
Stock: 1 1/2
Sleigh
Seat
Stock: 1/2
Sleigh
Side
Stock: 1/2, cut 2 Left pattern piece.
Sleigh
Side
Stock: 1/2, cut 2 Right pattern piece.
Sleigh
Back
Stock: 1/2
Drill and countersink backside to attach Seat with #6 x 1 1/4 F.H. screws.
Frame
Stock: 3/4" Cut 2 Roundover, 1/4 R.
Insert
Stock: 1/4 Cut 2
Insert
Stock: 1/4 Cut 2
Insert
Stock: 1/4 Cut 2
Base
Stock: 3/4
Birdhouse
Roof
Stock: 1/4 Cut 2
Front
Back
Birdhouse
Attach to front edge of Roof with glue and #18 x 5/8 wire brads.
Birdhouse
Attach to front edge of Roof with glue and #18 x 5/8 wire brads.
Birdhouse
Side
Stock: 1/4 Cut 2
60
Cut edge at 60
Bottom
Stock: 1/4
Birdhouse
Front /Back
Stock: 1/4, cut 1 each Assemble with #6 x 3/4 brass screws or #18 x 5/8 finishing nails and glue.