Académique Documents
Professionnel Documents
Culture Documents
In this tutorial we will try out some of the most useful commands in RhinoGold. Powerful tools such as Boolean Operations, Pipe, Bezel Studio and Revol.
Under the Drawing tab with the Smart Curve tool create a curve in the top view defining the butterfly shape. Its important to activate the vertical symmetry option in the command line.
Smart Curve
Then, in the Modeling tab with the Pipe, round caps tool create a wire with a 1.5mm diameter along the curve.
Now, with the Circle tool under the Drawing tab we make several circles of different measurements to define the butterflys body as shown above.
Circle
Under the Drawing tab with the Trim tool, we can cut the inside part of each circle, then use the Auto Connect tool to unite all the curves into a single curve.
1 RhinoGold Tutorials
Now, under the Modeling tab with the Revol tool we can create the solid that represents the butterfly body.
Revol
Under the Modeling tab with the Pipe, round caps Tool create the wire around the Arc, in this case with a 1mm diameter.
Pipe
Still in the Modeling tab with the Sphere tool, define the last detail of the antenna, in this case with a 2mm diameter.
Sphere
The next step, under the Transform tab with the Mirror: Symmetrical Horizontal tool, in the top view, create the antenna on the other side.
10
Smart Curve
Back to the Drawing tab, with the Smart Curve tool, define the interior of the butterfly wings.
2 RhinoGold Tutorials
Now we can use Multiple Pipe, under the Modeling tab. select every curve created in the previous step and define a 1mm diameter.
11
Multiple Pipe
Under the Gems tab, with the Gem Studio tool, select the placement and sizes of the Gems to insert, then, if needed, move them to the correct height.
12
Gem Studio
We can select the Gems and under the Transform tab choose the Mirror: Symmetric Horizontal Tool to create the same in both sides.
13
Now its time to select all the Gems and run the Bezel Studio command, under the Jewelery tab, to make a bezel for each gem.
14
Bezel Studio
We're TDM Solutions, developers of RhinoGold with more than 10 years of experience. Our goal is to deliver 3D to jewelry designers! Enjoy learning RhinoGold through these tutorials based on real jewelry. Start creating your jewelry in 3D with the newest and most advanced 3D tool for Jewelry! Get RhinoGold and don't get left behind! info@tdmsolutions.com | +34 937547774 http://www.en.rhinogold.com/store.php
15
Boolean Union
Lastly, under the Modeling tab with the Boolean Union tool unite all the parts into a single object.
3 RhinoGold Tutorials