Académique Documents
Professionnel Documents
Culture Documents
Truncated nozzle designed for PR=1030 with 87.72in length. Unstructured grids with 1,80,000 cells. No inflation at wall boundaries. RNG K-e turbulence model is used with enhanced wall treatment. Investigated and compared for two cases
Chen Nozzle contour(from coordinates) MOC contour for same design conditions.
Chen geometry@5bar-PF
Converged Net mass flow rate =0.8190kg/s Qualitatively acceptable
Chen geometry@10bar-PF
Issues Absolute pressure limited to 1e0 Pa Temp. limited to 1e0k Incorrect Physical results
K-e chen@5bar-PO
Reversed flow is observed.
MOC@5bar-PF
Issues Absolute pressure limited to 1e0 Pa Temp. limited to 1e0k Incorrect Physical results Time step reduced due to excessive temp changes
MOC@5bar-PO
Qualitatively acceptible Observed for only 5000 iterations. Residuals are observed to be still decreasing. Net mdot = -499.323kg/s.(PO)
MOC@15bar-PO
Reversed flow is observed at PO boundaries. Net mdot =-623.11kg/s Residuals-almost constant
MOC@25bar-PO
Reversed flow is observed at PO boundaries. Net mdot =-1750.1653kg/s Residuals-almost constant Still iterations has to be done