Vous êtes sur la page 1sur 1

LACT UNITS - CRUDE OIL

OXY Project
The Project
OXY, Californias largest natural gas and oil producer, was in need of replacing Dual LACT units in an existing facility. The McKenna Engineering team created a complete design submittal package for OXY including a 3-D SolidWorks model by utilizing the laser scan and P&ID provided by the Design Engineer.

The Challenge
The LACT units that were provided needed to fit into a tightly constrained installation location for the replacement of existing equipment. McKenna engineers were able to work around the existing constraints which included drains, process piping, and electrical lines to create these custom LACT units.

Design
Materials of Construction: Carbon Steel Fluid: Crude Oil Temperature: 150 Deg F Flow: 1000 GPM (34,285 BPD)

The Solution
McKenna Engineering designed two separate LACT units that were combined into a single skid in order to accommodate the spatial constraints of the job site. The skid was also designed to be raised above grade level to avoid pipelines and any other obstacles in the provided area. Upon OXYs approval of McKenna Engineerings 3D SolidWorks model and complete submittal package; our team then fabricated, assembled, tested, and shipped from our ISO 9001 Certified Carson, CA facility.

Disch Press: 720 PSI Max Misc: 8 300# Class Flanges

Major Equipment
Strainers, PD Meters, DeAerator Tanks, Actuated Double Block & Bleed Valves, Prover Connections, Static Mixers, BS&W Monitors, Sampling Systems, Sampling Probes, Drain Connections, and 100% X-Rayed ASME B31.4

1162 E. Dominguez St. Carson, CA 90746 310.763.7929 sales@mckennaengineering.com

Vous aimerez peut-être aussi