0 évaluation0% ont trouvé ce document utile (0 vote)
14 vues4 pages
This document summarizes the design of a one-way simply supported concrete slab with a maximum span of 3 meters, thickness of 125 mm, and maximum uniform distributed load of 10 kN/m^2. The slab requires 10 mm diameter reinforcement bars spaced at 100 mm as the main tension reinforcement and 8 mm diameter bars spaced at 200 mm as distribution reinforcement. The actual l/d ratio of 30 exceeds the permissible l/d ratio of 29.54, so the slab fails the deflection check for a simply supported condition. Modification factors are provided to adjust the permissible l/d ratio depending on the percentage of tension reinforcement.
Description originale:
one way alb design excel sheet ca be used at eduaction level
This document summarizes the design of a one-way simply supported concrete slab with a maximum span of 3 meters, thickness of 125 mm, and maximum uniform distributed load of 10 kN/m^2. The slab requires 10 mm diameter reinforcement bars spaced at 100 mm as the main tension reinforcement and 8 mm diameter bars spaced at 200 mm as distribution reinforcement. The actual l/d ratio of 30 exceeds the permissible l/d ratio of 29.54, so the slab fails the deflection check for a simply supported condition. Modification factors are provided to adjust the permissible l/d ratio depending on the percentage of tension reinforcement.
This document summarizes the design of a one-way simply supported concrete slab with a maximum span of 3 meters, thickness of 125 mm, and maximum uniform distributed load of 10 kN/m^2. The slab requires 10 mm diameter reinforcement bars spaced at 100 mm as the main tension reinforcement and 8 mm diameter bars spaced at 200 mm as distribution reinforcement. The actual l/d ratio of 30 exceeds the permissible l/d ratio of 29.54, so the slab fails the deflection check for a simply supported condition. Modification factors are provided to adjust the permissible l/d ratio depending on the percentage of tension reinforcement.