Vous êtes sur la page 1sur 5

2011ANSYS,Inc.

February17,2012 1
14.0Release
Introduction
ANSYSMechanicalStructural
Nonlinearities
2011ANSYS,Inc. February17,2012 2
Welcome!
Welcome to the Basic Structural Nonlinearities in ANSYS Mechanical training
course!
This training course covers basic procedures for performing structural
nonlinear analyses using the Mechanical Interface.
It is intended for users already familiar with the procedures for performing a
linear static analysis in the Mechanical environment.
Prerequisite is ANSYSMechanical IntroductionPart I
Advanced Nonlinear Materials and Advanced Contact are covered in separate
classes.
2011ANSYS,Inc. February17,2012 3
CourseMaterials
The Training Manual you have is an exact copy of the slides.
Workshop descriptions and instructions are included in the training manual.
Copies of the workshop files are available via download from customer portal
Several advanced training courses are available on specific topics. See the
training course schedule on the ANSYS homepage http://www.ansys.com/
under Services >Training...
2011ANSYS,Inc. February17,2012 4
CourseObjectives
Review Background on Nonlinearities
Types of Nonlinearities
Theory & Assumptions
Present General Setup Procedures in Mechanical
Introduction Large Deflection
Introduction to Contact Technology
Introduction to Metal Plasticity
Convergence Diagnostics Tools
2011ANSYS,Inc. February17,2012 5
TopicsCovered
MainChapters
1. Overview
2. GeneralProcedures
3. IntroductiontoContact
4. IntroductionMetalPlasticity
5. Stabilization
6. NonlinearDiagnostics

Vous aimerez peut-être aussi