0 évaluation0% ont trouvé ce document utile (0 vote)
34 vues2 pages
The document provides design specifications for a 2450 MHz Yagi antenna with up to 12 directors, including element lengths, spacings, boom positions, and estimated gains. It also details the construction of a folded dipole radiator element, listing all relevant measurements.
The document provides design specifications for a 2450 MHz Yagi antenna with up to 12 directors, including element lengths, spacings, boom positions, and estimated gains. It also details the construction of a folded dipole radiator element, listing all relevant measurements.
The document provides design specifications for a 2450 MHz Yagi antenna with up to 12 directors, including element lengths, spacings, boom positions, and estimated gains. It also details the construction of a folded dipole radiator element, listing all relevant measurements.
Wavelength =122 mm Parasitic elements contacting a round section metal boom 25 mm across. Folded dipole mounted same as directors and reflector Director/reflector strip =4 mm by .1 mm Radiator strip =4 mm by .1 mm REFLECTOR 75.7 mm long at boom position = 30 mm (IT = 25.5 mm) RADIATOR Single dipole 56.3 mm tip to tip, spaced 24 mm from reflector at boom posn 54 mm (IT = 15.5 mm) Folded dipole 74.4 mm tip to tip, spaced 24 mm from reflector at boom posn 54 mm (IT = 24.5 mm) DIRECTORS Dir Length Spaced Boom position IT Gain Gain (no.) (mm) (mm) (mm) (mm) (dBd) (dBi) 1 67.2 9.2 63.7 21.0 4.8 6.9 2 66.4 22.0 85.7 20.5 6.5 8.6 3 65.8 26.3 112.0 20.5 7.8 9.9 4 65.1 30.6 142.6 20.0 8.9 11.0 5 64.6 34.3 176.8 20.0 9.8 11.9 6 64.0 36.7 213.5 19.5 10.5 12.7 7 63.5 38.5 252.1 19.5 11.2 13.3 8 63.1 40.4 292.5 19.0 11.7 13.9 9 62.7 42.2 334.7 19.0 12.2 14.4 10 62.3 44.1 378.7 18.5 12.7 14.9 11 61.9 45.9 424.6 18.5 13.1 15.3 12 61.6 47.1 471.7 18.5 13.5 15.7 COMMENTS The abbreviation "IT" means "Insert To", it is the construction distance from the element tip to the edge of the boom for through boom mounting Spacings measured centre to centre from previous element Tolerance for element lengths is +/- 0 mm Boom position is the mounting point for each element as measured from the rear of the boom and includes the 30 mm overhang.The total boom length is 502 mm including two overhangs of 30 mm The beam's estimated 3dB beamwidth is 34 deg A half wave 4:1 balun uses 0.66 velocity factor RG-11 (PE) and is 40 mm long plus leads FOLDED DIPOLE CONSTRUCTION Measurements are taken from the inside of bends Folded dipole length measured tip to tip = 74mm Total rod length =163mm Centre of rod=82mm Distance BC=CD=22mm Distance HI=GF=12mm Distance HA=GE=36mm Distance HB=GD=59mm Distance HC=GC=82mm Gap at HG=20mm Bend diameter BI=DF=30mm If the folded dipole is considered as a flat plane (see ARRL Antenna Handbook) then its resonant frequency is less than the flat plane algorithm's range of 10:1 B C D /--------------|-------------\ A E \-------------| |-------------/ I H G F