Description : RM235 6G 24 Port Dual Domain SAS Expander Backplane
Date : 2012 . 4 . 13
Rev. 0.9
1
CHENBRO 6G 24 Port SAS Expander Dual Domain B/P 80H1032350xA0
Description: This BACKPLANE is design for SAS 24 BAY (2.5 SAS HDD)
LED Status: Blue: HDD Power on indicator (Turn on when HDD is inserted) Green / RED: Green: HDD Accessing indicator (Flashing when HDD Accessing) RED: HDD Fail indicator (Turn on when HDD failed)
Specifications: Specification Host Interface Mini-SAS HDD Interface SAS Hot-Swap Yes, allows user to on line replace Hard Disk Drive Display LED indicates Hard Disk Drive status Power LED Blue (When HDD is present) Access LED Green (When HDD is busy) Error LED Red (When HDD is error) Environment Monitor Temperature senor detect(RT1, RT2) Connectors 1.SAS29 *24 2.Mini-SAS Connector for bridge *14 2 3.Standard 4P Power connector *6 for +5V, +12V from power supply 4.Pin Header 2.54mm (2x3) *1, (1x4) *1 5.Wafer 2.54mm Connector 2P *2 Dimension (L) x (W) x 2.4(H) mm Material FR4 10 layer
CHENBRO 6G 24 Port SAS Expander Dual Domain B/P 80H1032350xA0
Placement :
Note : 1. Default is for single domain , and need to plug another daughter board on the right side ( shown as below ) Primary Domain Secondary Domain CEA7 CEA6 CEA5 CEA4 CEA3 CEA2 CEA1 CEB7 CEB6 CEB5 CEB4 CEB3 CEB2 CEB1 JP1 JP2 JP3 JP01 JM01 CN01 CN02 CN03 CN02 CN03 JF4 JF3 JF2 JF1 JP4 JP5 JP6 CN02 CN03 3
2. If required dual domain solution , shall plug two daughter boards ( shown as below )
3. Detail information of daughter board can refer to another manual
CHENBRO 6G 24 Port SAS Expander Dual Domain B/P 80H1032350xA0
CHENBRO 6G 24 Port SAS Expander Dual Domain B/P 80H1032350xA0
Buzzer warning control select Connector (CN03)
2.54 Pin Header (CN01)
Pin NO. Descriptions 1 GND 2 Fail signal Input(Active Low) Pin NO. Descriptions 1 MUTE - 2 MUTE + Pin NO. Descriptions 1-2 Close By Expander B 2-3 Close By Expander A (Default) Pin NO. Descriptions 1-2 Close By Expander B 2-3 Close By Expander A (Default) Pin NO. Descriptions Pin NO. Descriptions 1 FAIL LED + 2 FAIL LED - 3 KEY PIN 4 NC 5 MUTE SW + 6 MUTE SW - 5