0 évaluation0% ont trouvé ce document utile (0 vote)
19 vues14 pages
STORMWATER Management (SWM) BEST MANAGEMENT PRACTICE (bmp) a = ctA0 Where a is waterway cross-sectional area in ft2 / sec / acre, Cb is a runoff coefficient, I is the average rainfall intensity (in / hr) during heavy rainfall, s is the average ground slope (ft / 1000 ft), and a is the drainage area.
STORMWATER Management (SWM) BEST MANAGEMENT PRACTICE (bmp) a = ctA0 Where a is waterway cross-sectional area in ft2 / sec / acre, Cb is a runoff coefficient, I is the average rainfall intensity (in / hr) during heavy rainfall, s is the average ground slope (ft / 1000 ft), and a is the drainage area.
STORMWATER Management (SWM) BEST MANAGEMENT PRACTICE (bmp) a = ctA0 Where a is waterway cross-sectional area in ft2 / sec / acre, Cb is a runoff coefficient, I is the average rainfall intensity (in / hr) during heavy rainfall, s is the average ground slope (ft / 1000 ft), and a is the drainage area.
Veronica Kelly A/P David (CE093814) NurFatin Binti Abdul Rahaman (CE093472) Siti Nur Ilyana Ahmad Safari (CE093734) Date of Presentation : 14/8/2014 Lecturer : Dr. Mohd Hafiz Bin Zawawi
CEWB222 Hydraulics Engineering
PROJECT Green Roof
GREEN ROOF MODEL Disadvantages
costs of installing.
maintenance costs.
higher demands on the waterproofing system of the structure. [both because water is retained on the roof and due to the possibility of roots penetrating the waterproof membrane.]
attract may include pest insects [could easily infiltrate a residential building through open windows.]
BEST MANAGEMENT PRACTICE (BMP) 1) Control flooding and erosion 2) Control hazardous materials to prevent release of pollutants into the environment (source control) 3) Plan and contruct stormwater systems.
4) Protect natural waterways 5) Build soft structure eg. Ponds, swales DESIGN CONCEPT OF STORMWATER MANAGEMENT USING MSMA Ac = CmA0.5
Where : Ac is the area of the waterway in acres
Cm is a coefficient which reflects the slope of the drainage area
A is the drainage area in acres. qm = Cbi (S/A)0.25
DESIGN CONCEPT OF STORMWATER MANAGEMENT USING MSMA Where:
unit discharge (ft3/sec/acre), qm Cb is a runoff coefficient, i is the average rainfall intensity (in/hr) during heavy rainfall, S is the average ground slope (ft/1000 ft), and A is the drainage area
DESIGN CONCEPT OF STORMWATER MANAGEMENT USING MSMA a = CtA0.75
Where :
a is waterway cross-sectional area in ft2 Ct is a runoff coefficient A is the drainage area in acres. REFERENCES Stormwater Quality Management in Malaysia, Intan Baizurah, UPM [academia.edu]
Green Roofs As An Environmentally Responsive Element in Buildings, Dr. Sam C.M.Hui