Académique Documents
Professionnel Documents
Culture Documents
Measurments of the air flow were taken from each odd and even quench tray, the location and results
of the air flow measurment are shown in Figure #2 and Figure #3
Drawing of Blower in Cell #1
Mechanism of the frame.
1- It will move upward for the robot to put the piston in position on the quench tray.
2- It will move downward closer to the blower duct.
3- It will move upward again for the cropper to collect it.
Figure #1
Figure #1 Illustrate the position of the tray quench on top of the blower
Odd side
Figure #2
Figure #2 illustrates the position of where the piston is sitting on the quench tray.
Measurements of the air flow were taken from each hole and side of the quench tray.
Temperature Reading were between 280 C and 300 C.
Cell #1- A Even side
Figure #3
Figure #3 illustrates the position of where the piston is sitting on the quench tray.
Measurements of the air flow were taken from each hole and side of the quench tray.
Temperature Reading were between 280 C and 300 C.
Cell #12- A Odd