AIM: Implementing different kind of VLANs on Switches. Creating VLANs, Static Vlan and Dynamic VLAN Configuring VMPS ----------------------------------------------------------------------------------------------------------------------- 1. Configure VLAN on given single switch. Assigning Switch Ports to VLANs
2. Configure VLAN on 2 switches as per the given topology
3. Configure the following topology and create inter-VLAN Routing INT507: NETWORK ADMINISTRATION LABORATORY Lab 9: Virtual LANs
Chandra Prakash, LPU Page 2
4. Configure inter-VLAN Routing for the following diagram and write the commands for configuring the VLANs and routers. Also give port-security on VLAN 3 and VLAN 4. PC0-PC1 are in VLAN1.---192.168.0.0/28 PC2-PC3 are in VLAN2-- 192.168.1.0/28 PC4-PC5 are in VLAN3--192.168.2.0/28 PC6-PC7 are in VLAN4--192.168.3.0/28 Also apply port Security on one interface of switch in each VLAN. write the commands for configuration as well as port security.