Académique Documents
Professionnel Documents
Culture Documents
On Behalf of
Sheenly Lighting Co., Ltd
LED Panel
Model No.: See report the second page for details
Prepared For :
Prepared By :
Date of Test:
Date of Report:
Report Number:
TEST REPORT
IEC 60598-2-2 and/or EN 60598-2-2
Part 2: Particular requirements
Section Two Recessed luminaires
Report Reference No......................:
ATS2011727
Toby
Approved by (name+signature)........:
Jenny
Date of issue.....................................:
Address ............................................:
CBTL
(Same as above)
Applicants name............................:
Address ............................................:
RMT
SMT
WMT
TMP
Test specification:
Standard ...........................................:
CE
N/A
IECEN60598_2_2B
TRF Originator..................................:
Intertek Semko AB
Master TRF.......................................:
Dated 2005-03
Copyright 2005 IEC System for Conformity Testing and Certification of Electrical Equipment
(IECEE), Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE
is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will
not assume liability for damages resulting from the reader's interpretation of the reproduced material due to
its placement and context.
Test item description .....................: LED Panel
Manufacturer ....................................:
Address ............................................:
See page 2
Page 2 of 26
Test item particulars ..................................................: LED panel with independent power unit
Possible test case verdicts:
- test case does not apply to the test object ................ : N (not applicable)
- test object does meet the requirement ...................... : P (Pass)
- test object does not meet the requirement ................ : F (Fail)
Testing
Date of receipt of test item............................................ : October 09, 2011
Date (s) of performance of tests................................... : October 09-26, 2011
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
List of test equipment must be kept on file and available for review.
Throughout this report a comma (point) is used as the decimal separator.
In this report requirements valid for EN only are marked with (EN).
General product information:
See below model list for details, Model SL-PAN-50W-NW-AN is selected to represent the whole series
because of maximum wattage for this model.
Models
Rated wattage
Rated Input
SL-PAN-50W-WW/NW/PW-AN/LS
50W
SL-PAN-06W-WW/NW/PW-SN
6W
SL-PAN-12W-WW/NW/PW-SN/AN
12W
SL-PAN-20W-WW/NW/PW-AN
20W
SL-PAN-26W-WW/NW/PW-BN/AN/LS
26W
AC 100-240V,
SL-PAN-40W-WW/NW/PW-BN
40W
50/60Hz
SL-PAN-45W-WW/NW/PW-AN/BN
45W
SL-PAN-25W-TC-LS
25W
SL-PAN-50W-WT-LS
50W
SL-PAN-50W-BW-AN/LS
50W
Page 3 of 26
Requirement + Test
1.1 (0)
1.2 (0.1)
Result - Remark
Verdict
P
Standard
Yes
No
1.2 (0.3)
No
1.4 (2)
CLASSIFICATION
1.4 (2.2)
Class I
1.4 (2.3)
IP20
1.4 (2.4)
No
No
No
Yes
No
Yes
No
1.4 (2.5)
1.5 (3)
MARKING
2.5.1 (-)
P
Warning In manufacturers
instruction:
Under no circumstances, be
covered with insulating
matting or similar materials
1.5 (3.2)
Mandatory markings
(see page 2)
Format of symbols/text
Additional information
Language of instructions
P
In English and / or local
language
1.5 (3.3.1)
Combination luminaires
1.5 (3.3.2)
Nominal frequency in Hz
1.5 (3.3.3)
Operating temperature
1.5 (3.3.4)
1.5 (3.3.5)
Wiring diagram
1.5 (3.3.6)
Special conditions
1.5 (3.3.7)
1.5 (3.3.8)
1.5 (3.3.9)
1.5
(3.3.10)
50/60 Hz
P
N
Page 4 of 26
Requirement + Test
Result - Remark
Verdict
1.5
(3.3.11)
No remote control
1.5
(3.3.12)
No clip-mounted luminaire
1.5
(3.3.13)
1.5
(3.3.14)
1.5
(3.3.15)
No socket outlet
1.5
(3.3.16)
1.5
(3.3.17)
1.5
(3.3.18)
1.5
(3.3.19)
1.5
(3.3.20)
1.5
(3.3.101)
1.5 (3.4)
Yes
Label attached
N
Ordinary luminaire
N
N
N
P
1.6 (4)
CONSTRUCTION
1.6 (4.2)
1.6 (4.3)
1.6 (4.4)
Lampholders
1.6 (4.4.1)
Integral lampholder
1.6 (4.4.2)
Wiring connection
1.6 (4.4.3)
1.6 (4.4.4)
Positioning
1.6 (4.4.5)
1.6 (4.4.6)
Centre contact
1.6 (4.4.7)
1.6 (4.4.8)
Lamp connectors
1.6 (4.4.9)
No such parts
Page 5 of 26
Requirement + Test
1.6 (4.5)
Starter holders
Starter holder in luminaires other than class II
Result - Remark
Verdict
N
No starter holder
Terminal blocks
Tails
Unsecured blocks
1.6 (4.7)
1.6 (4.7.1)
1.6 (4.7.2)
1.6 (4.7.3)
1.6
(4.7.3.1)
Welded connections:
- spot welding
- Type Z attachment
1.6 (4.7.4)
1.6 (4.7.5)
Heat-resistant wiring/sleeves
1.6 (4.7.6)
Multi-pole plug
1.6 (4.6)
1.6 (4.8)
No multi-pole plug
- test at 30 N
Switches:
- adequate rating
No switch
- adequate fixing
- polarized supply
1.6 (4.9)
1.6 (4.9.1)
Retainment
Method of fixing...................................................... :
1.6 (4.9.2)
See ANNEX 2
N
N
Class I luminaries
Page 6 of 26
Requirement + Test
Result - Remark
Verdict
Assembly gaps:
- not coincidental
Retainment of insulation:
- fixed
- lining in lampholder
1.6 (4.11)
Electrical connections
1.6
(4.11.1)
Contact pressure
1.6
(4.11.2)
Screws:
1.6
(4.10.2)
1.6
(4.10.3)
1.6
(4.11.3)
- self-tapping screws
- thread-cutting screws
Screw locking:
- spring washer
- rivets
1.6
(4.11.4)
>50% copper
1.6
(4.11.5)
No contact to wood
No wood materials
1.6
(4.11.6)
1.6 (4.12)
1.6
(4.12.1)
1.6
(4.12.2)
1.6
(4.12.4)
Locked connections:
Page 7 of 26
Requirement + Test
Result - Remark
Verdict
1.6
(4.12.5)
1.6 (4.13)
Mechanical strength
1.6
(4.13.1)
Impact tests:
1.6.1 (-)
1) live parts
2) linings
3) protection
1.6
(4.13.1)
4) covers
1.6
(4.13.3)
1.6
(4.13.4)
- IP54 or higher
a) fixed
b) hand-held
1.6
(4.13.6)
Tumbling barrel
Not socket-outlet-mounted
luminaires
1.6 (4.14)
1.6
(4.14.1)
Mechanical load:
Page 8 of 26
Requirement + Test
1.6
(4.14.2)
Adjusting devices:
- strands broken
1.6
(4.14.3)
Result - Remark
Verdict
1.6
(4.14.4)
1.6
(4.14.5)
Guide pulleys
No guide pulleys
1.6
(4.14.6)
Strain on socket-outlets
1.6 (4.15)
Flammable materials:
- spacing 30 mm
- screen dimensions
- thermal protection
a) construction
1.6
(4.15.2)
c) surface temperature
1.6 (4.16)
1.6
(4.16.1)
1.6
(4.16.2)
See ANNEX 2
- spacing 35 mm
- spacing 10 mm
Thermal protection:
- external
- fixed position
Page 9 of 26
Requirement + Test
1.6
(4.16.3)
1.6 (4.17)
Drain holes
Result - Remark
Verdict
P
No drain holes
Clearance at least 5 mm
1.6 (4.18)
Resistance to corrosion:
1.6
(4.18.1)
- rust-resistance
1.6
(4.18.2)
No such part
1.6
(4.18.3)
- corrosion of aluminium
1.6 (4.19)
No ignitors
1.6 (4.20)
1.6 (4.21)
Protective shield:
1.6
(4.21.1)
Shield fitted
1.6
(4.21.2)
1.6
(4.21.3)
No direct path
1.6
(4.21.4)
No attachments
1.6 (4.22)
Attachments to lamps
1.6 (4.23)
1.6 (4.24)
1.6 (4.25)
1.6 (4.26)
Short-circuit protection:
1.6
(4.26.1)
1.6
(4.26.2)
Short-circuit test
1.6
(4.26.3)
1.7 (11)
Voltage form
No sharp edges
No such parts
Sinusoidal
Non-sinusoidal
PTI
1)< 600
2)> 600
Rated pulse voltage (kV) ....................................... :
Page 10 of 26
Requirement + Test
Result - Remark
Verdict
5) Not used
1.8 (7)
1.8 (7.2.1
+ 7.2.3)
N
0.02
Thread-forming screws
1.8 (7.2.4)
No such luminaire
N
P
1.8 (7.2.5)
1.8 (7.2.6)
1.8 (7.2.7)
1.8 (7.2.8)
Bare metal
1.8
(7.2.10)
1.8
(7.2.11)
1.9 (14)
1.9 (15)
SCREW TERMINALS
(see Annex 1)
(see Annex 3)
SCREWLESS TERMINALS
Separately approved; component list
N
(see Annex 1)
Page 11 of 26
Requirement + Test
Result - Remark
(see Annex 4)
Verdict
N
1.10 (5)
1.10 (5.2)
1.10
(5.2.1)
Means of connection.............................................. :
Type Z
P
P
3x0.75mm
1.10
(5.2.3)
Type of attachment, X, Y or Z
Type Z
1.10
(5.2.5)
1.10
(5.2.6)
Cable entries:
1.10
(5.2.7)
1.10
(5.2.8)
Insulating bushings:
- suitably fixed
- material in bushings
1.10
(5.2.9)
1.10
(5.2.10)
Cord anchorage:
1.10
(5.2.10.1)
Page 12 of 26
Requirement + Test
Result - Remark
Verdict
b) types of cable
1.10
(5.2.10.2)
1.10
(5.2.10.3)
Tests:
- displacement 2 mm
0.2mm
- no movement of conductors
1.10
(5.2.11)
1.10
(5.2.12)
Looping-in terminals
1.10
(5.2.13)
1.10
(5.2.14)
1.10
(5.2.15)
1.10
(5.2.16)
1.10
(5.2.17)
1.10
(5.2.18)
- IEC 60083
- other standard
1.10 (5.3)
Internal wiring
1.10
(5.3.1)
Through wiring
Page 13 of 26
1.10
(5.3.1.1)
Requirement + Test
Result - Remark
Verdict
- factory assembled
- temperatures........................................................ :
24 AWG
Insulation thickness
1.10
(5.3.1.3)
1.10
(5.3.1.4)
1.10
(5.3.1.5)
1.10
(5.3.1.6)
1.10
(5.3.2)
1.10
(5.3.1.2)
Insulating bushings:
- suitable fixed
- material in bushings
1.10
(5.3.4)
1.10
(5.3.5)
1.10
(5.3.6)
Wire carriers
1.10
(5.3.7)
1.10
(5.3.3)
1.11 (8)
1.11
(8.2.1)
Page 14 of 26
Requirement + Test
Result - Remark
Verdict
Basic insulated parts not used on the outer surface Basic insulated parts are
without appropriate protection
earthed
No double-ended tungsten
filament lamp used
No double-ended high
pressure discharge lamp
1.11
(8.2.2)
1.11
(8.2.3)
Class II luminaire:
- basic insulated metal parts not accessible during
starter or lamp replacement
1.11
(8.2.4)
--Class l luminaire
Portable luminaire:
1.11
(8.2.5)
1.11
(8.2.6)
Reliable fixed
1.11
(8.2.7)
No plug
1.12 (12)
- supply voltage: Un factor; calculated voltage (V) . : 1.1 times rated voltage
Page 15 of 26
Requirement + Test
1.12
(12.3.2)
- no part unserviceable
Result - Remark
Verdict
- marking legible
(see Annex 2)
(see Annex 2)
1.12
(12.6.1)
- track-mounted luminaires
- thermal link
- track-mounted luminaires
1.12
(12.6.2)
1.12 (12.7) Thermal test (failed lamp control gear in plastic luminaires):
1.12
(12.7.1)
- thermal link
1.12
(12.7.2)
Page 16 of 26
Requirement + Test
Result - Remark
Verdict
1.13 (9)
1.13 (9.2)
1.13 (9.3)
Humidity test 48 h
1.14 (10)
1.14
(10.2.1)
SELV:
>2M
>2M
>2M
Page 17 of 26
Requirement + Test
1.14
(10.2.2)
Result - Remark
Verdict
P
Dummy lamp
No ignitors
No manual ignitors
SELV:
1480V/1min, no broken
1480V/1min, no broken
1480V/1min, no broken
1.14
(10.3.1)
1.15 (13)
1.15
(13.2.1)
Ball-pressure test:
1.15
(13.3.1)
- part tested............................................................ :
- part tested............................................................ :
1.15
(13.4.1)
1.15
(13.3.2)
P
N
Ordinary luminaries
Page 18 of 26
Requirement + Test
Result - Remark
Verdict
ANNEX 1: components
object/part No.
Cable
code
A
manufacturer/
trademark
Shenzhen Bao
Hing Electric
Wire
type/model
technical data
standard
H05VV-F
Min. 3 X 0.75
mm2, 300/500V
IEC60227
20AWG, 105C ,
300V
UL758
Test in
appliancce
(UL)
EN61347-1
CE
Internal wire
Various
Various
Electronic
control gear for
LED lamps
FOZZ
Translucent
cover
mark(s)
of
f
VDE
131689
EN61347-2-13
PC
EN60598-1
Test in
appliance
(UL)
SL-PAN-50W-WW/NW/PWAN/LS
LED lamps in luminaire
Ewp-50-1.4A
0.93
Page 19 of 26
Requirement + Test
Result - Remark
Verdict
1,06 X 240V=254V
--
--
test 2
test 3
limits
clause 12.5
b
l
test 4
24.8
105
27.1
105
38.5
Ref.
45.4
Ref.
Enclosure, luminaires
43.2
90
*
-
Ambient
25.0
limit
Page 20 of 26
Requirement + Test
Result - Remark
Verdict
(14)
SCREW TERMINALS
(14.2)
(14.3.2.1)
(14.3.2.2)
Special preparation
(14.3.2.3)
Terminal size
(14.3.3)
(14.4)
Mechanical tests
(14.4.1)
Minimum distance
(14.4.2)
(14.4.3)
Special preparation
(14.4.4)
External wiring
No soft metal
(14.4.5)
Corrosion
(14.4.6)
Torque (Nm)........................................................... :
Lug terminal
Mantle terminal
(15)
SCREWLESS TERMINALS
(15.2)
(14.4.7)
(14.4.8)
(15.3.1)
Material
(15.3.2)
Clamping
(15.3.3)
Stop
(15.3.4)
Unprepared conductors
(15.3.5)
(15.3.6)
(15.3.7)
Clamping independently
(15.3.8)
Fixed in position
(15.3.10)
Conductor size
Type of conductor
(15.5.1)
Page 21 of 26
Requirement + Test
(15.5.1.1)
(15.5.1.2)
(15.5.2)
(15.6)
Electrical tests
(15.7)
(15.8.1)
(15.9)
terminal
Result - Remark
Verdict
10
terminal
10
terminal
10
10
terminal
10
Page 22 of 26
Requirement + Test
Result - Remark
Verdict
1.5 (3)
MARKING
1.5 (3.3.101)
1.10 (5)
1.10 (5.2.1)
Connecting leads
1.10 (5.2.2)
ZB
(3.3)
(4.5.1)
DK: socket-outlets
(5.2.1)
ZC
(4 & 5)
(13.3)
(13.3)
(13.3.2)
Page 23 of 26
Appendix 1
Equipment List
No.
Equipment
01 Hybrid Recorder
02 Hybrid Recorder
Data Acquisition / Switch
03
Unit
Data Acquisition / Switch
04
Unit
05 Temp. & Humid. Chamber
06 Oven Chamber
14 Oscilloscope
15 Digital Power Meter
16 Digital Power Meter
17 Digital Power Meter
18 Ohm Meter
19 Multi Meter
21 Desktop Multi Meter
22 Desktop Multi Meter
23 Desktop Multi Meter
24 Desktop Multi Meter
25 Hi-Pot Tester
26 Grounding Bond Meter
27 Leakage Current Meter
28 Touch Current Meter
Insulation Resistance
29
Tester
30 Digital Power Meter
31 Electronic Scale
32 Push-Pull Scale
33 Test hook
Manufacturer
Model No.
Serial No.
Calibration Calibration
date
due date
Yokogawa
Yokogawa
DR130
DR130
27D216293
27D216294
2011.01.04
2011.01.04
2012.01.03
2012.01.03
Agilent
34970A
MY41027365
2011.01.04
2012.01.03
Agilent
34970A
MY41025924
2011.01.04
2012.01.03
Gongwen
Rongfeng
Tektronix
Qingzhi
Ainuo
Everfine
Yang Zi
Fluke
Good Will
Fluke
Good Will
Good Will
Ainuo
Ainuo
EXTECH
EPRE
HSD-500
101A-3
TDS3012B
8716C
8715B
YF9901
YD2511
111
GDM-8245
45
GDM-8245
GDM-8245
9604
9613B
7611
400C
0109
900875
B035855
870307119
038710069
405075
794
85150263
E900535
8392013
E830573
E830574
039609405
039606212
1330308
0402A05
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
Yang Zhi
YD2683
030
2011.01.04
2012.01.03
Qingzhi
Heng Tong
Japan
Instrumentation
Zhilitong
8716C
J3S5
870307126
18514
2011.01.04
2011.01.04
2012.01.03
2012.01.03
NK-300
49779
2011.01.04
2012.01.03
TH-1
(0~150mm)/0.0
1mm
(0~150mm)/0.0
1mm
W8L180T1
2011.01.04
2012.01.03
27452
2011.01.04
2012.01.03
27460
2011.01.04
2012.01.03
Oregon
JB913R
06A03-4101
2011.01.04
2012.01.03
Wenzhou
Zhilitong
Good Will
DM
Zhilitong
Zhilitong
Zhilitiong
Zhilitong
Zhilitong
Zhilitong
America
Zhilitong
Zhilitong
Zhilitong
Zhilitong
Zhilitong
Zhilitong
All Power
Chuang Hong
Kong Tel
JZC-B2
GT-1
GAG-810
DM8898
LJ-1
ZP-1
ZT-1
ZJ-1
ZF-1
ZA-1
ULP-01
TZ-1
TZ-11
TZ-12
TZ-13
TZ-14
ZB-1
IP50-20D
CPS-5030D
5KVA
15032
G010104
D913311
D826715
LJ010104
44/ATCS-44
D30L80/ATCS-45
D14N30/ATCS-46
X010106/ATCS-47
A010102/ATCS-48
A01/ATCS-49
L010304
D4L100/ATCS-51
D3L100/ATCS-52
D1L20/ATCS-53
D40/ATCS-54
D5W500
401024
04021101
002
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
34 Digital Caliper
Guang Lu
35 Digital Caliper
Guang Lu
36
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
58
59
60
Electronic ThermoHygrometer
Goniometer
Tumbling Barrel
Audio Generator
Noise Generator
Plug Torque Tester
Shot Test Pin Probe
Test Probe 41
Finger Nail Probe
Test Finger Probe
Accessibility Probe
UL Finger Probe
Rigid Finger Probe
Test Probe
Test Probe
Test Probe
Test Probe
Steel Ball
DC Power Supply
DC Power Supply
Isolating Transformer
Page 24 of 26
No.
Equipment
61 Hammer
62 Hammer
63 Hammer
64
65
66
67
68
69
70
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
E30
E53
E54
W1
W2
Manufacturer
Guangdong
Zhijian
Zhilitong
Guangdong
Zhijian
Zhilitong
kanon
kanon
Sanke Electrical
Sanke Electrical
Model No.
Serial No.
CJ-2
24003
2011.01.04
2012.01.03
CJ-2
C021204
2011.01.04
2012.01.03
CJ-2
24004
2011.01.04
2012.01.03
C021104
04C175
04A037
31208433081
31208455481
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
890411
04454
ATCS-73
350400004
18955
ATCS-76
AT24H
870512009
870512012
301020
280887
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
MY44008068
2011.01.04
2012.01.03
R024007
Y021507
200609812
ATE868205164
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
2012.01.03
G290700126
Q013408/ATCS-88
Q013508/ATCS-89
2011.01.04
2011.01.04
2012.01.03
2012.01.03
23489-6
2011.01.04
2012.01.03
ATCS-91
ATCS-92
ATCS-93
ATCS-94
DAMS2009110136
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
TI09101201
2011.01.04
2012.01.03
10-866030
2011.01.04
2012.01.03
090074695
2011.01.04
2012.01.03
0907005
12VC26618M
7664009
272
B-0138
B-0137
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2011.01.04
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2012.01.03
2011.01.04
2012.01.03
2011.01.04
2012.01.03
2011.01.04
2012.01.03
Hammer
CJ-2
Torque Driver
30LTDK
Torque Driver
12LTDK
AC Voltage Stabilizer
SVC-30KVA
AC Voltage Stabilizer
SVC-30KVA
Frequency Converter Power
All Power
AFC-220
Supply
Frequency Converter Power
NewG Power
Ng-3120a
Supply
High-voltage Passive Probe
TEXAS
HVP3011
Switching Mode Power
Manson
SIM-9106
Supply
Tape line
Great Wall
GW-589E
Platform Scale
Shanghai
TGT-100
Timer
Tian Fu
PC396
Digital Power Meter
Qingzhi
8716C
Digital Power Meter
Qingzhi
8716C
Digital Power Meter
Everfine
PF9805
Digital Power Meter
iDRC
CP-280
Data Acquisition / Switch
Agilent
34970A
Unit
Glow Wire Test Set
Zhilitong
GTR-B
Needle Flame Test Set
Zhilitong
ZY-2
Hi-Pot Tester
Changsheng
CS5051
DC Electronic Load
Techred
TR-868
Switching Mode Power
Manson
SIM-9303
Supply
Ball Pressure Tester
Zhilitong
QY-1
Ball Pressure Tester
Zhilitong
QY-1
Oscilloscope voltage probe
Tektronix
P5100
(100X)
K type thermocouple
OMEGA
TT-K-30-1000
J type thermocouple
OMEGA
TT-J-30-1000
Small finger probe (8.6)
HUANAN
EX-A02
Small finger probe (5.6)
HUANAN
EX-A02
Draught-proof enclosure
Shanghai Jingtian
DMS-B12
Proof tracking Test
Shenzhen
LD-H
Apparatus
Demaisheng
228 meter
SIMPSON
228
(0~150mm)/0.0
Digital Caliper
Guang Lu
1mm
Torque Driver
Kanon
10DPSK
Digital Power Meter
Yokogawa
WT110
Desktop Multi Meter
Fluke
45
LCR bridge
YANGZHI
YD2810B
Exposure level tester
NARDA
2304/03
Magnetic field probe
NARDA
2300/90.10
100cm2
Digital Vibration Tester
Beijing
ACT2000Zhongyuan
S20L-MI2240L
SCD-88
Surge Tester
Wuhan HighVoltage Research
Institute
V98662050
20011
Calibration Calibration
date
due date
Page 25 of 26
Appendix 2
Photo documentation
PHOTO 1
View:
SL-PAN-50W-NWAN
[ ] front
[
] rear
] right side
] left side
] top
] bottom
] internal
PHOTO 2
View:
SL-PAN-50W-NWAN
[
] front
] rear
] right side
] left side
] top
[ ] bottom
[
] internal
Page 26 of 26
Photo documentation
PHOTO 3
View:
Power unit
[
] front
] rear
] right side
] left side
] top
] bottom
[] internal
PHOTO 4
View:
Power unit
[
] front
] rear
] right side
] left side
] top
] bottom
[] internal