Académique Documents
Professionnel Documents
Culture Documents
Basic propose
AUsing Nastar check the neighbor is reasonable or not, if not,
we can directly delete it, if lost ,we should add.
BIf the neighbor is external cell, we should check the CGI and
BSIC carefully
C Basic parameter check, for example: encryption
algorithm, handover switch, MA.
DAnalysis the handover fail times, do some adjust as whole
E find the top ho failed times cell and register the GSM Cell
to GSM Cell for analysis
F Hardware problem should be solved: both warning and
hidden hardware problem;
Whole analysis
Analysis why it failed and give a litter big threshold for that kind of HO type:
Here is the demo for outgoing analysis (we should consider both attempt times
and failed times)
H372A:Failed Cell
Outgoing
Handovers
(Uplink
Quality)
H372B:Failed Cell
Outgoing
Handovers
(Downlink
Quality)
H
372L:Failed Cell
Outgoing
Handovers
(Other
Causes)
H372D:Failed Cell
Outgoing
Handovers
(Downlink
Strength)
H372C:Failed Cell
Outgoing
Handovers
(Uplink
Strength)
H372F:Failed Cell
Outgoing
Handovers
(Better Cell)
For example:
if we find PBGT success rate is low, we can adjust the Inter-cell HO
Hysteresis , PBGT HO Threshold to reasonable big value for it.
If we find the downlink strength HO success is low, also increase the Edge HO
DL RX_LEV threshold;
But pay attention dont modify them to big value, otherwise some
other KPI will be affected, we should pay attention to the top bad
cell analysis if this kind of adjust no result!
Parameter check
Background:
How Huawei handover algorithm work:
Only neighbor cell RxLev is higher than the threshold, then the neighbor
cell can be allowed in the candidate cell queue, otherwise no handover
will come to this neighbor cell. this is we called M criterion.
Parameter check
How to setting:
M rule you will setting here: we suggest 20
Parameter check
If no improve, you should do things as following:
In M2000, analysis the Top10 handover fail times cell and
register GSM cell to GSM cell object for the top 10.
Check every top10 bad cells, see handover to which neighbor cell is the
most bad, then using the K-bias punish the most bad neighbor:
Hardware check
Sometimes, HO parameters modify in top cell but still
low HO success rate.
We should also check hardware problem first:
Alarm information collection
TRX level stat. analysis for hardware fault but no alarm