Académique Documents
Professionnel Documents
Culture Documents
Home
Contact Us
Corporate Profile
Products
Applicable Standards
Interpretation
Steam Purity Limits LIST OF APPLICABLE ELECTRICAL STANDARDS
Testing Schedule
Technical Information The relevant applicable standards Indian as well the international are listed below. In case the bidder offers the
product of international make then the product shall confirm to the corresponding international standards viz.
IEEE/IEC/NEMA etc. Or alternatively the product offered should confirm to Indian Standard.
A. INDIAN STANDARDS
1. General Requirements :
IS – 732 - Code of practice for electrical wiring installations ( System voltage not extending 650 volts )
IS – 900 - Code of practice for installation and maintenance of Induction Motors
Classification of insulting materials for electrical machinery and apparatus in relation to their
IS – 1271-
thermal stability in service
IS – 1646 - Code of practice for fire safety of buildings (general) Electrical Installations
IS – 1866 - Code of practice for maintenance of insulating oil.
IS – 1882 - Code of practice for outdoor installation of public address systems.
IS – 1886- Code of practice for installation and maintenance of Transformers
IS – 1913- General and safety requirements of electric lighting fittings
IS – 2032- Graphical symbols used in electric technology.
IS – 2165- Guide for insulation coordination
IS – 2274- Code of practice for electrical wiring installations (System voltage exceeding 658 volts)
IS – 2309- Code of practice for the protection of buildings and Allied structures against lightning.
Code of practice for fire safety of industrial buildings – Electrical generating and distributing
IS – 3034 -
stations.
IS – 3043 - Code of practice for earthing
Code of practice for installation and maintenance of switchgear (System voltage not exceeding
IS-3072 - Part -1
1000 volts)
Code of practice for selection, installation and maintenance of fuses (voltage not exceeding 650
IS – 3106 -
volts)
IS – 3638 - Application guide for gas-operated relays.
IS – 3646 - Code of practice for interior illumination.
IS – 3716 - Application guide for insulation coordination – Equipment located in hazardous situations.
IS – 3842 - Application guide for electrical relays for AC system.
IS – 4004 - Application guide for non-linear resisted type lightning arrestors for AC system
IS – 4146 - Application guide for voltage transformers.
IS – 4201- Application guide for current transformers.
IS – 5571- Guide for selection of electrical equipment in hazardous area.
IS – 5572 - Classification of hazardous areas for electrical installations.
IS – 5780 - Intrinsically safe electrical apparatus and circuits.
IS – 5908- Method of measurement of electrical installations in buildings.
A. EQUIPMENT
1. Switchgear
(a) General :
IS – 375 - Marking and arrangement for switchgear bus-bars, main connections and auxiliary winding.
IS – 694 - Part 1 PVC insulated cables ( for voltages up to 100v) with copper conductors.
IS – 1248 - Direct acting electrical indicating instruments.
IS – 2147 - Degrees of protection provided for enclosures for low voltage switchgear and control gear.
IS – 2208 - HRC cartridge fuse links up to 650 V.
IS – 2705 - Part I, II & III – Current transformers.
IS – 3156 - Part I, II & III – Voltage transformers.
IS – 3202- Code of practice for climate proofing of electrical equipment.
IS – 3231 - Electrical relays of power system protection.
Heavy duty air break switches and composite units of air-break switches and fuses for voltages
IS – 4047-
not exceeding 1000 volts.
IS – 4237 - General requirements for switchgear and control gear for voltages not exceeding 1000V.
http://www.ecosustainenergy.com/Applicable%20Standards.htm 1/13/2010
Applicable Electrical Standards Page 2 of 3
IS – 5987 - Code of practice for selection of switches (voltage not exceeding 1000V)
(b) 6.6 KV
IS – 335 - Insulating oil for transformers and switchgear.
IS – 2516 –Part 1 Alternating current circuit breakers – Requirements and tests for voltage ranges 1000 to 11000
- Sec.2 volts.
Metal enclosed switchgear and controlgear for voltages above 1000 V but not exceeding 11000
IS – 3427 -
V.
(d) M.C.C. :
IS – 1554 -Part I PVC insulated (heavy duty) electric cables for working voltages up to and including 1100 volts.
IS – 1822 - AC motor starters of voltage not exceeding 1000 volts.
IS – 2959 - AC contactors of voltage not exceeding 1000 V.
IS – 3961-Part II Recommended current ratings for PVC insulated and PVC sheathed cables.
Code of practice for installation and maintenance of AC induction motor starters (voltage not
IS – 5124 -
exceeding 1000V).
IS – 2959 - AC contactors of voltage not exceeding 1000 V.
(e) Invertors :
IS – 391 - Mains transformers for electronic equipment.
2. Transformers :
IS – 335 - Insulating oil for transformers and switchgear.
IS – 2026 - Power transformers.
IS – 2099 - High voltage porcelain bushings.
IS – 3070 - Lightning arrestors for AC systems.
IS – 3637 - Gas operated relays.
IS – 3639 - Fittings and accessories for power transformers
3. Motors :
IS – 325 - Three phase induction motors.
IS – 4691- Degrees of protection provided by enclosures for rotating electrical machinery.
IS – 4722 - Rotating electrical machines
4. Batteries :
IS – 1652 - Stationery cells and batteries, lead-acid type (with plants positive plates).
BS – 440 - Stationery batteries
5. Cables :
IS – 1554 -Part I PVC insulated (heavy duty) electric cables for working voltages up to and including 1100 volts
& II and for upto 33 KV.
IS – 1753 - Aluminium conductors for insulated cables.
IS – 3961 - Part II – Recommended current ratings for cables.
IS – 3975 - Mild steel wires, strips and tapes for armouring cables.
IS – 5819 - Recommended short-circuit ratings of high voltage cables.
IS – 5831 - PVC insulation and sheaths of electric cables
6. Altornators :
IS – 7132 - 1973 Guide for testing synchronous machines
IS – 5422 - 1996 Turbine type generators
IS – 7306 - 1974 Methods for determining synchronous machine quantities from tests.
IEC 60028 Ed. -
International standard of resistance for copper
2.0 b: 1925
IEC 60034-1
Rotating electrical machines – Part 1 : Rating and performance
Ed.11.0 b:2004
IEC 60034-11
http://www.ecosustainenergy.com/Applicable%20Standards.htm 1/13/2010
Applicable Electrical Standards Page 3 of 3
http://www.ecosustainenergy.com/Applicable%20Standards.htm 1/13/2010