ASME B&PV
Section IX ()
Quality Welds -
é
A)
ey
ASME Boiler & Pressure Vessel Code is divided into 11 different Sections.
‘Section | deals with Boilers, Section It - Materials, ...Sectian V - NDE, ...
Section VIII - Vessels, and Section IX - Welding. Inspectors & engineers
often complain about this Welding Code.
& They don’t understand it!
Actually, this Code is one of the best written Codes in the PEL library. The
Code’s organization is casy to follow, the Code’s purpose is clear, the Code
has limited text, fairly easy charts ..
MSTS
Is Section IX a friend or foe,
It just depends if you're in the know
“The scoffer belittles that which he does not understand”ASME Sect IX + Weldin,
Module Objectives
At the end of this module you should know:
v The purpose of Section IX
Y How Section IX is organized
vs specific Section IX terms; positions, Pa, SMTS, etc
v How to evaluate a WPQ} welder’s papers i‘
Vv) How to evaluate a WPS/POR; weld procedure
Y How to quickly find exam answers
WPO - Welder Performance Qualification —lewmench
WPS - Weld Procedure Specification — Reape.
POR - Procedure Qualification Record
& Welding Webster“
“Two “P’s” with a Rod”
Performance - Welder
Procedure - Weld Recipe
€
WIR woder pede peur
wis wid "goed geile?
:
is Pak ~ proedut qrdbtbaatern ved2% Qualified - One who has been approved by__ WES
MSTS
6
ASME Sect IX - Welding
Purpose of Section IX
Quality Welds
A qualified welder using a qualified
weld procedure with an appropriate.
environment results in an gaad weld. y. |
\e
‘Mich of Section IX is best undetstood bythe analog) of Baking,
‘The Welders the Baker andihe Weld Procedure isthe Recipe!
VP oeelder pre
Practical definition wes aprodee
qualify 7 whet
Good - One which meets the WS
Exercise W-1 Which Code? (Sect. 1X or Primary Code)
1. Specifies kow to Qualify « Welder (HH.
2. Specifies howto Qualify a Weld Procedure ira a
3. Specifies the acceptance criteria for fabrication welds __PG 9
4. Specifies restrictions on the fabrication welding, Ka be
ie, welding processes, temperature, joint design, ..
The Key; ——________
Section IX only provides directions on how to qualify a welder or a weld
procedure. All other welding directions are given in the Primary Code,
(e.g. B31.3, ASME Sect. VII, API 650), or in API'577.
swranig Cote looking for answers and experience Einstein's Cheary of Tew Relay