The Rate/Hr figures within the Component Summaries were developed using the Centerline BUILDER files posted on this CatMiner BUILDER Downloads page with the following assumptions:
No optional attachments included, and in the case of any mandatory
attachments - the no charge or lowest cost base option is used. Reman was used where available for the minor components (i.e. pumps, turbos, other engine 'hang-on' components, etc.) For major components, the default '1st OH, 2nd OH, then replace with Reman' strategy as indicated in the centerline files was used. PMs without fluids. $102/hr and $93/hr for field and shop labor rates respectively (USD). No intervals, labor times, or replacement %'s were changed from what is in the centerline files (which should represent a medium application). Term - 60,000 hrs for the Off-Highway Trucks, 45,000 hrs for other machines. In Calculator, 80% before failure percentage used. Rates reflect Customer List prices. Rates do not include tires.
The following is also not represented in the rate/hr:
. . .
Mid-life Duo-cone seal replacement
Mid-life re-bearing and reseal repair options for gear pumps Front wheel station after failure repair options (trucks) Pump drive after failure repair options PMs at an interval lesser than a traditional PM 1 at 250 hours (except for initial or one-time PMs which may have an initial service lesser than the 250 hr mark they are included). GET and truck liner replacement parts