0 évaluation0% ont trouvé ce document utile (0 vote)
18 vues8 pages
To remove a stuck label from the LabelWriter:
1. Open the front lid and remove the front cover by lifting it up and pulling it towards the front.
2. Lift up and remove the inner guidance mechanism.
3. Cut the stuck label while gently peeling it away from the rubber transport roller using a cutter knife to avoid damaging the roller. Continue cutting and peeling until all label pieces are removed.
Description originale:
Instructions on how to repair error with dymo printers when paper jam occures
To remove a stuck label from the LabelWriter:
1. Open the front lid and remove the front cover by lifting it up and pulling it towards the front.
2. Lift up and remove the inner guidance mechanism.
3. Cut the stuck label while gently peeling it away from the rubber transport roller using a cutter knife to avoid damaging the roller. Continue cutting and peeling until all label pieces are removed.
To remove a stuck label from the LabelWriter:
1. Open the front lid and remove the front cover by lifting it up and pulling it towards the front.
2. Lift up and remove the inner guidance mechanism.
3. Cut the stuck label while gently peeling it away from the rubber transport roller using a cutter knife to avoid damaging the roller. Continue cutting and peeling until all label pieces are removed.