Académique Documents
Professionnel Documents
Culture Documents
Q2. For the network given below, obtain node equations and then form admittance matrix
(Ybus). All impedances and voltages are marked in pu.
Q3. Figure 1 shows single diagram of a practical three bus system connecting Pokhara
substation. Transmission line uses bear conductor which has resistance of 0.11/km and
diameter of 23.45mm. These lines are connected using single circuit tower whose dimensions are
given in fig. 2. Derive the admittance matrix of this 3 bus system. Lines are rated at 132kV and
100MVA. Use nominal - method for transmission line representation.