Académique Documents
Professionnel Documents
Culture Documents
name : 3gprs
apn : 3gprs
poxy : kosongkan saja
port : kosongkan saja
user name : 3gprs
pasword : 3gprs
server : kosongkan saja
mmsc : kosongkan saja
mms proxy : kosongkan saja
MMS port : kosongkan saja
mobile countery code : 510
mobile network code : 89
authentication type : pap
apn type : internet
=> cara setting apn kedua
name : 3data
apn : 3data
poxy : kosongkan saja
port : kosongkan saja
user name : 3data
pasword : 3data
server : kosongkan saja
mmsc : kosongkan saja
mms proxy : kosongkan saja
MMS port : kosongkan saja
mobile countery code : 510
mobile network code : 89
authentication type : pap
apn type : internet
=> cara setting apn ketiga
name : internet
apn : internet
poxy : kosongkan saja
port : kosongkan saja
user name : kosongkan saja
pasword : kosongkan saja
server : kosongkan saja
mmsc : kosongkan saja
mms proxy : kosongkan saja
MMS port : kosongkan saja
mobile countery code : 510
mobile network code : 89
authentication type : pap
apn type : internet
Password 3gprs
Authentication Normal
Homepage http://wap.three.co.id
Connection Security off
Session mode permanent
3. Press Option > Advanced Setting, Masukkan parameter yang dibutuhkan seperti yang
dijabarkan dibawah ini :
Phone IP address Automatic
Primary name server 0.0.0.0
Secondary name server 0.0.0.0
Proxy server address 10.4.0.10
Proxy port number 3128
MMS Parameter Setting :
1. Go to Menu, click Messages > Option > Settings > Multimedia Messages > Access Point
in Use > Options > New Access point > Use default settings
2. Change each MMS parameter to this value:
Connection name 3mms
Data bearer GPRS
Access point name 3mms
User name 3mms
Prompt Password No
Password 3mms
Authentication Normal
Gateway IP address 0.0.0.0
Homepage http://mms.three.co.id
3. Press Option > Advanced Setting, fill in the parameters with these values:
Phone IP address Automatic
Primary name server 0.0.0.0
Secondary name server 0.0.0.0
Proxy server address 10.4.0.10
Proxy port number 3128
4. Press Messaging > Options > Setting > Multimedia Message, fill in the default setting
with the values below.
Access Point in use: 3mms
Multimedia reception: always on
On receiving message: Retrieve immediately
Allow anonymous messages: yes
Receive adverts: yes
Receive report: yes
Deny report sending: no
Message validity: maximum time
Image size: small
Default speaker: loudspeaker
IV.
Sony
Ericsson GPRS Parameter Setting
1.
2. Type in 3GPRS
APN : 3gprs
User Name : 3gprs
Password : 3gprs
Click Save.
3. Click Internet setting > WAP profile > New Account
4. Type in 3GPRS
Connect Using : 3GPRS
IP Address : 0.0.0.0
Click Save.
5. Click More/ Edit > Setting
Connect using : http
Use proxy : Yes
Proxy : 10.4.0.10
Port : 3128
User Name : 3gprs
Password : 3gprs
Click Save.
6. Click Advance
Name : 3GPRS
Address : http://wap.three.co.id
Click Save.
MMS Parameter Setting :
1. Go to Menu, click Connectivity > Data Comm. > New Account
2. Type in 3mms
APN : 3mms
User name : 3mms
Password : 3mms
Click Save
3. Click Internet setting > WAP profile > New Account
Type in 3mms
Connect Using : 3mms
IP Address : 0.0.0.0
Click Save
Go to Menu > Web Access > Select > Web Sessions > Select
Go to Menu > Web Access > Select > Web Sessions > Select
Click New Entry > Select > Entry Detail, fill the parameters with this value:
Name : 3GPRS
Homepage : http://wap.three.co.id
Gateway IP :
Port 1 :
Timeout : 15 minutes
GPRS APN : 3gprs
User Name : 3gprs
Password : 3gprs
(Leave other parameters blank)
Press Done
3. Click 3GPRS > Menu >Set Default > Select
MMS Parameter Setting :
* On standby mode
1. Click Message > Menu > Message Setup > Select > MMS Message Setup > Change >
Server Info > Select
2. Pick 3MMS > Select
If the operator list is not available, then:
* On standby mode
1. Go to Menu > Web Access > Select > Web Sessions > Select > New Entry > Select > Entry
Detail, and fill in the parameters with this value :
Name : 3mms
Homepage : http://mms.three.co.id
Gateway IP : 10.4.0.10
Port 1 : 3128
Timeout : 15 minutes
GPRS APN : 3mms
User Name : 3mms
Password : 3mms
(Leave other parameters blank)
Press Done.
2. Click Message > Menu > Message Setup > Select > MMS Message Setup > Change >
Server Info > Select
3. Pick one of the available listed items, and press Menu > Edit > Select > Service Name,
and OK
4.
5.
6.
7.
8.
9.