1. The CAD file to complete streetlight design with can be found in
F:\Users\Marko\Training Design\DRAWINGS\STREET LIGHTING 2. The civil source file along with the ROW cross sections can be found in F:\Users\Marko\Training Design\SOURCE FILES\CIVIL 3. All other required details can be found in the streetlight design folder (link in item 1) and the photometric analysis folder F:\Users\Marko\Training Design\ANALYSIS\PHOTOMETRICS Project Information Geographic Area: City of Markham Title: Neamsby Investments Inc. South 14th Avenue Green Road (There is useful information like this in the civil source files) What to do a. Set up the template with the appropriate information (includes keymap). b. Set up the detail sheets. - Light details (all 9 sheets) - MST 15C - MST 19A - MST 19B - OPSD 2200.01 - All 4 R.O.W. cross-sections Note: Import these using the IM command in AutoCAD. Make sure that No path is selected when importing PDFs rather than Relative path. c. Bring the civil base into our drawing file, clean it up and create a civil layer. d. Create viewports. The command for creating viewports is MV. You can zoom in and out of the viewport while it is unlocked. When it is locked, you cannot adjust the scale. To adjust the scale to 1:250, for example, you would double click inside the viewport youve created and type: z 4xp. Its 4xp because 1000/4 is 250 therefore typing z 1xp would be 1:1000, z 2xp would be 1:500 and so on You can also adjust the UCS of the viewport with the UCS command. Make sure the north arrow in the template is adjusted accordingly. UCS n 3 (select origin, +x, +y) plan e. Lay design out on paper. f. Draft design in AutoCAD.