1. Open tibemsd.conf and set tibrv_transports = enabled
2. Open transports.conf and set the following [RV] type = tibrv service = 7500 network = 10.203.54.113 (your host ip) daemon =7600 3. Open the topic.conf and add following lines test export="RV" ( here the topic name is test) 4. Restart the EMS after all changes as you are doing manual changes to the config file 4. In designer creat two processes one to send to the topic and another to receiver message 5. In the RV Connection use the same parameters those are set in point2
Now run both the process and publish a message , subscriber will subscribe it