Choose the rmt file named ZDC ZA-5000 FW2.0.3.rmt,Open it:
Then press Upload: The ZA-5000 will reboot automatic, please wait for 3 minutes to take effect! 5. Logging in again (192.168.0.228), check version No.! == CONFIDENTIAL (All right reserved by ZDC) ==
Nanjing Z-Com Wireless Co.,Ltd.
6.
After upgraded successful, Click Backup/Restore, to set ZA-5000 to factory
default settings.
Congratulations, You had completed upgrade successful! Enjoy it!
Note2: This is only for upgrading F/W from downwards of 1.0.6
(including 1.0.6) to 2.0.3 of ZA-5000 series product of Nanjing Z-com Wireless Co.,Ltd. 1. Under Windows, run Command Console Application: Start -> Run Windows 98 ,Type command.com; Above Windows 98,Type cmd.exe; To rum Command Console Application 2. Key in ftp X.X.X.X the X.X.X.X is the IP address for ZA-5000 which is configured(Not Default IP Address), then key in username (admin) and password (Default is : password ) 3. Key in put e:\ZA5000.rmt. Make sure that the file named ZDC ZA-5000 FW2.0.3.rmt has to be renamed to ZAG5000.rmt e:\is the path which file ZAG5000.rmt located; 4. Please wait for 3 minutes after finishing upgrading. 5. After rebooting, Logging in again (Not Default IP Address), check version No.! 6. After upgraded successful, Click Backup/Restore, to set ZA-5000 to factory default settings.
Windows Operating System: Windows Operating System (OS) Installation, Basic Windows OS Operations, Disk Defragment, Disk Partitioning, Windows OS Upgrade, System Restore, and Disk Formatting