Example Problem Manual PART 4 DESIGN BY RULE REQUIREMENTS 4.15 Supports and Attachments 4-183 4.15.1 Example Problem E4.15.1 Horizontal Vessel, Zick's Analysis 4-183 Determine if the stresses in the horizontal vessel induced by the proposed saddl e supports are with acceptable limits. The vessel is supported by two symmetric equally spaced saddl es welded to the vessel, without reinforcing plates or stiffening rings. All Category A and B joi nts are Type 1 butt welds and have been 100% radiographically examined. See Figure E4.15.1