Manueal de Cigüeñal

Crankshaft Manual
April 2006
Compiled & edited

By
Mike Caruso, Steve Fox, Dave Hagen, Yolanda Carranza & Scott Groves
Copyright AERA 2006
AERA - Engine Builders Association

330 Lexington Drive
Buffalo Grove, IL 60089-6998
Tech Support - (888) 324-2372
(847) 541-6550
FAX (857) 541-5808
http://www.aera.org
Note: Do not attempt to use solely as an interchange manual.
This manual contains all information from previous editions and was compiled from the best
available sources, and has been edited with the utmost care. Neither the Association nor its
staff can assume any responsibility for the accuracy of this data or the consequences of its
application.
Table of Contents
Note: Do not attempt to use as an interchange manual.
Section 1.
The Crankshaft Manual

Table of Contents
Introduction
Machinists Shop Data
Engine and/or Equipment Specifications
Quick Cubic Inch Displacement & Compression
Abbreviations & Symbol Marks
Modo de Empleo en Espaol
8-9
Clculo Rpido del Desplazamiento
10
Abreviaturas y Smbolos
11
Index
12 - 13
Section 2.
Specifications by Manufacturers
Section 3.
Crankshaft Applications by Casting Number
15 497
491 - 653
Introduction
AERA gratefully acknowledges the excellent cooperation and feedback provided by all Past, Active and
Associate members who were called upon for assistance in the creation of this manual.
This manual is created from latest information contained and maintained in PRO-SIS AERAs Engine
Specification Software program. All information contained in the manual is available on a CD-ROM for
use in your shop. PRO-SIS also links these specifications with applicable AERA Technical Bulletins for
easy review of the latest product updates and revisions.
The word PRO-SIS stands for Professional Specification Information Software.
PRO-SIS Engine Specifications is a trademark of AERA.
MACHINISTS SHOP DATA

Identifying a Crankshaft - When the accurate identity of a component is not known, it is best to first
attempt to locate an identifying number or mark. A casting number is usually stamped or cast into the
crankshaft. All available casting numbers known to AERA have been listed in The Crankshaft Manual.
Certain crankshafts do not carry a casting number. Reference the comments in the Alphabetical Listing
By Manufacturer section of The Crankshaft Manual for these marks.
Locating Specifications by Casting Number - Find the casting number in the numerical list of casting
numbers. Known casting numbers for crankshafts may be found in the casting number section of this
manual. The corresponding engine manufacturer, displacement(s), and specifications are detailed in the
alphabetical listing section. An asterisk (*) following the engines displacement suggests that additional
information about the crankshaft can be found in the alphabetical listing comment section.
Locating Specifications by Manufacturer - Each engine make is categorized by number of cylinders in
the alphabetical listing section (i.e., four cylinder, six cylinder, eight cylinder, etc.). Displacement is listed
in liters from smallest to largest in each of those categories. Some heavy-duty engines are listed by
model number in place of liter displacement for easier reference. Note that extensive use of VIN codes
has been made to insure that the proper specifications are listed.
Multiple VIN listings: Vehicle manufactures use the same VIN designation character for different
engines, (i. e. GM uses 1.6L VIN 6) these engines that are manufactured by four different engine
companies, Daewoo, Isuzu, Suzuki & Toyota. Others such as the Ford 5.0L VIN F have seven different
records according to years used.
Those different records are necessary as engine specifications or castings changed significantly
enough to warrant a different record.
Note: Do not attempt to use as an interchange manual.
ENGINE AND/OR EQUIPMENT SPECIFICATIONS

Since many vehicle manufacturers will offer engines of other than their own manufacture, it may
be necessary to refer to another section in the manual (i.e., Lincoln, Mercury - see Ford Motor
Company).
Year Produced and/or Used - when applicable this column shows the production year, or
years, when the engine is or was made and/or used by the manufacturer. The year(s) data is
also used to indicate variations in model years when an engine is, or was, used in differently
named vehicles and/or equipment.
Stroke is listed first so you can find the crankshaft that you are working with. The crankshaft's
stroke specification is included in the alphabetical listing section, because it serves as another
crankshaft identification characteristic.
Bore - the cylinder bore of the block is included as another way to confirm the engine's
identification. The standard bore diameter is all we list.
Rod Journal Specifications rod journal specifications are listed flush left and the fillet is
listed to the right of the rod journal specifications if known.
Main Journal Specifications main journal specifications are listed flush left first is the journal
diameter. Dimensions for the main journals are listed down as #1, #2 and so on. Then the main
journal fillet is listed across to the right. New production fillet standards are stated in decimal
dimensions with relatively broad plus or minus limits based on available information. These are
converted to corresponding fractional inches in this manual to accommodate the most
commonly used measuring gauges in the field. Fillet specifications provide for adequate fillet
during journal regrinding are a guide only for dressing grinding wheels.
Before refinishing a crankshaft that uses thrust washers to provide end clearance, it is
recommended to check the size of the thrust washers to be used with this crankshaft. When the
same engine is produced using either method to provide for end clearance (i.e., thrust washers
for flanged bearings) it will be noted in the comment portion following the specifications.
Front/Rear Seal Diameter Specifications - these listings are the standard new crankshaft
dimensions and may be used as a machining guideline. Listed as front seal or rear seal shaft
diameter.
Casting # - Applicable crankshaft casting numbers. Open spacing or other separating methods
such as dots, dashes, etc may extend some casting numbers. It is important to locate the
complete number.
Comments - The last line of each listing may contain additional information about this particular
engine.
Quick Cubic Inch Displacement

.7854 X bore diameter X bore diameter X crankshaft stroke = cubic inches of one cylinder.
.7854 X 4.00 = 3.1416 X 4.00 = 12.57 X 3.484 = 43.79 cubic inches of one cylinder.
One cylinder containing 43.79 cubic inches X number of cylinders 8 = 350.32
Quick Check Engine Compression Ratios

The calculation of an engine's compression ratio (C.R.) is based on the formula:
SV + CV
CR = -------------CV
S.V.
=
=
Swept Volume for one cylinder in ccs.

Bore X Bore X Stroke X 12.9
C.V.
=
=
Clearance Volume for one cylinder in ccs.

H.V. minus E.D.V. plus D.V. plus G.V.
H.V.
=
=
Head Volume (published or measured in ccs)

Best if measured because head volume varies.
E.D.V. =
=
Effective Dome Volume (published or measured in ccs)

Dome Volume minus valve relief and/or dish volume
D.V.
=
=
Deck Volume clearance (piston to deck) in ccs

Bore X Bore X deck height X 12.9
G.V.
=
=
Gasket Volume in ccs

Gasket bore X gasket bore X compressed thickness X 12.9
or enter known gasket volume.
All compression volume measurements are in cubic centimeters. (ccs)
Abbreviations & Symbols
AIR
BC
BS
CC
CFI
Cyl.
DEFI
DIA
DOHC
E
EFI
EX
EXH
FWD
HD
HP
HYD
I
INT
IVSH
LP
MFI
N/
NA
OHC
OHV
RWD
SOHC
TBI
VIN
VLV
V/PRO
V/REC
W/
W/O
air injection/thermactor ports

barrel carburetor
balance shaft
cubic centimeters
central fuel injection
cylinder
dual electronic fuel injection
diameter
dual overhead camshaft
external
electronic fuel injection
except
exhaust valve
front wheel drive
heavy-duty
horsepower
hydraulic
internal
intake valve
installed valve stem height
liquid propane
multi-port fuel injection
none or not
not available
overhead camshaft
overhead valve
rear wheel drive
single overhead camshaft
throttle body injection
vehicle identification number
valve
valve protrusion
valve recession
with
without
MANUAL DE CIGEAL
INTRODUCCIN
AERA reconoce y agradece el excelente apoyo de todos los miembros Activos y Asociados
cuya colaboracin se solicit para la elaboracin de este manual.
El manual fue preparado con la informacin mas reciente contenida y mantenida en los
Programas (Software) de Especificaciones de Motores PROSIS de AERA. Toda la informacin
contenida en el manual est disponible en un Disco Compacto (CD-ROM) para el uso en su
taller. PROSIS asimismo vincula estas especificaciones con los Boletines Tcnicos de AERA
para as contar con una revisin sencilla de las actualizaciones y modificaciones de los
productos y partes mas recientes.
La palabra PROSIS significa Professional Specification Information Software.
PROSIS Especificaciones de Motores es una marca de AERA.
Informacin para Talleres de Rectificado

Identificacin de Cigeal Cuando la identidad exacta de un determinado componente no
se conozca, lo mejor es intentar primero ubicar un nmero o marca de identificacin. Por lo
general aparece un nmero forjado o estampado en el cigeal. Todos los nmeros de
fundicin conocidos por AERA han sido listados en el Manual de Cigeales. Ciertos
cigeales no llevan un nmero de pieza. Favor de referirse a los comentarios en la seccin
Lista Alfabtica por Fabricante del Manual del Cigeal, en relacin con dicha identificacin.
Localizacin de Especificaciones por Nmero de Fundicin - Localice el nmero de
identificacin en la lista numrica de identificaciones. Los nmeros conocidos de
identificaciones para cigeales pueden localizarse en la seccin de nmeros de
identificaciones de este manual. El fabricante de motores, el desplazamiento y las
especificaciones correspondientes se detallan en la seccin de lista alfabtica. Si aparece un
asterisco (*) despus del desplazamiento del motor, esto indica que la informacin adicional
sobre el cigeal puede localizarse en la seccin de comentarios de la lista alfabtica.
Localizacin de Especificaciones por Fabricante Cada clase de motor se lista por nmero
de cilindros en la seccin de lista alfabtica (p.ej., cuatro cilindros, seis cilindros, ocho cilindros,
etc.). Su desplazamiento se contiene en litros de menor a mayor en cada una de esas
categoras. Algunos motores de trabajo de uso pesado se incluyen por nmero de modelo en
lugar de desplazamiento por litros esto es para efectos de referencia. Ntese que el uso
extenso de los cdigos de VIN (Nmero de Identificacin del Vehculo) se ha hecho con el
objeto de asegurar que las especificaciones apropiadas se encuentran listadas.
Listados Mltiples de VIN - En algunos casos los fabricantes de vehculos usan la misma
carta de designacin de VIN para los diversos motores, es decir los motores de GM 1.6L VIN 6
son fabricados por cuatro diversas compaas, Daewoo, Isuzu, Suzuki y Toyota. En otros
casos como la Ford 5.0L VIN F tiene siete diversos registros segn los aos usados.
Esos diversos registros son necesarios pues las especificaciones o las forjas del motor
cambiaron perceptiblemente lo suficiente para hacer necesario un expediente diferente.
Nota: No intente utilizar como manual de intercambio.
8
Especificaciones de Motores y/o Equipo

En virtud de que muchos fabricantes de vehculos ofrecern motores diversos a los de su
propia manufactura, ser necesario referirse a otra seccin en el manual. (p. ej., Lincoln,
Mercury ver Ford Motor Company).
Ao de Produccin y/o Uso - Cuando esta informacin es aplicable, esta columna muestra el
ao de produccin, o bien el nmero de aos cuando el motor haya sido hecho y/o usado por el
fabricante. La informacin sobre el ao(s) asimismo se utiliza para poder indicar las
variaciones en los aos del modelo cuando un motor este siendo o haya sido usado en
vehculos y/o equipo de diferente denominacin.
Carrera del Pistn Es listado primero para que usted localice el cigeal con el que este
trabajando. La especificacin de la carrera del cigeal es incluida en la seccin de lista
alfabtica por que sirve como otra caracterstica de identificacin del cigeal.
Orificio / Cilindros La especificacin relativa al cilindro del bloque se incluye como otra
confirmacin para determinar la identificacin del motor. El dimetro del cilindro estndar es
todo lo que mencionamos.
Especificaciones del Mun de la Biela Las especificaciones del mun de la biela se
mencionan a la izquierda y los filetes, si se conocen se mencionan a la derecha de las
especificaciones del mun de la biela.
Especificacin del Mun Principal Las especificaciones del Mun Principal son las
primeras de la izquierda y se mencionan desde arriba hacia abajo (p.ej. #1, #2 y as
sucesivamente). Despus, hacia la derecha esta listado el ancho del mun principal. Las
normas de filetes de nueva produccin se expresan en dimensiones decimales con
relativamente amplios lmites (mas o menos) basados en la informacin disponible. Estos se
convierten a las correspondientes pulgadas fraccionarias en este manual con el objeto de
permitir el uso de los sistemas de medicin que por lo general se aplican en este campo. Las
especificaciones de filetes proporcionan los radios adecuados durante el esmerilado del mun
del cojinete y constituyen nicamente una gua para el desbaste de la rueda esmeriladora
(piedra para rectificar cigeales).
Antes de dar el acabado a un cigeal que utilice rondanas que permitan contar con un claro al
final, se recomienda verificar el tamao de estas rondanas que se utilizaran en el cigeal.
Cuando el mismo motor sea opcionalmente producido utilizando uno u otro mtodo para
efectos de proporcionar el claro final (esto es, rondanas, para los cojinetes), deber anotarse
en la parte de comentarios siguiente a las especificaciones.
Especificaciones de Dimetro del Sello Frontal/Trasero Estas listas son las dimensiones
del cigeal nuevo (estndar) y pueden utilizarse como una gua de rectificado. Es listado
como dimetro del sello frontal o sello trasero.
No. de Fundicin Algunos nmeros de pieza pueden ampliarse mediante expansin del
espacio u otros mtodos de separacin tales como cuadros, guiones, etc.. Es importante
localizar el nmero completo.
Comentarios La ultima lnea de cada lista puede contener informacin adicional sobre este
motor.
9
CLCULO RPIDO DEL DESPLAZAMIENTO EN PULGADAS CBICAS

.7854 X dimetro del cilindro X dimetro del cilindro X carrera del cigeal = pulgadas cbicas
de un cilindro.
.7854 X 4.00 = 3.1416 X 4.00 = 12.57 X 3.484 = 43.79 pulgadas cbicas de un cilindro.
UN CILINDRO CON 43.79 PULGADAS CBICAS X EL NMERO DE CILINDROS 8 = 350.32
CLCULO RPIDO DE LA RELACIN DE COMPRESIN

El Clculo de la relacin de compresin de un motor se basa en la frmula:
SV + CV
CR = -------------CV
S.V.
=
=
Volumen de Barrido (cilindrada para un cilindro en c.c. ).

Dimetro X Dimetro X Carrera X 12.9
C.V.
=
=
Volumen de la Distancia Libre del cilindro en c.c.

H.V. menos E.D.V. mas D.V. mas G.V.
H.V.
=
=
Volumen de la Cabeza (publicado o medido en c.c.)

Es mejor medir, porque varia el volumen de la cabeza.
E.D.V.
=
=
Volumen Efectivo del Domo (publicado o medido en c.c.)

Volumen del Domo menos el relieve de la vlvula y/o el volumen
del Plato.
D.V .
=
=
Volumen del (Techo) Tope, (espacio del pistn al tope en c.c)

Dimetro X Dimetro X Altura del Techo X 12.9
G.V.
=
=
Volumen de la Junta (Empaque) en c.c.

Dimetro de la junta X Dimetro de la Junta X el Espesor
Comprimido X 12.9 o introducir el volumen conocido de la junta.
Todas las medidas de volumen de compresin son en centmetros

cbicos. (c.c.)
10
Abbreviations & Symbols
Smbolos y Abreviaciones
AIR
BC
BS
CC
CFI
Cyl
DEFI
DIA
DOHC
E
EFI
EX
EXH
FWD
HD
HP
HYD
I
INT
IVSH
LP
MFI
N/
N/A
OHC
OHV
RWD
SOHC
TBI
VIN
VLV
V/PRO
V/REC
W/
W/O
Air Injection/Thermactor Parts / Inyeccin de Aire / Entrada del Termactor

Barrel Carburetor / Garganta del Carburador
Balance Shaft / Arbol Balanceador
Cubic Centimeters / Centmetros Cbicos
Central Fuel Injection / Inyeccin de Combustible Central
Cylinder / Cilindro
Dual Electronic Fuel Injection / Doble Inyeccin Electrnica de Combustible
Diameter / Dimetro
Dual Overhead Camshaft / Doble Arbol de Levas en la Cabeza
External
Electronic Fuel Injection / Inyeccin Electrnica de Combustible
Except / Excepto
Exhaust Valve / Vlvula de Escape
Front Wheel Drive / Traccin Delantera
Heavy-Duty / Servicio Pesado
Horsepower / Caballos de Fuerza
Hydraulic / Hidrulico
Internal
Intake Valve / Vlvula de Admisin
Installed Valve Stem Height / Altura del Vstago con la Vlvula Instalada
Liquid Propane / Propano Liquido
Multi-Port Fuel Injection / Inyeccin Mltiple de Combustible
None or Not / Ninguno o No
Not Available / No Disponible
Overhead Camshaft / Arbol de Levas en la Cabeza
Overhead Valve / Vlvulas en la Cabeza
Rear Wheel Drive / Traccin Trasera
Single Overhead Camshaft / Un Arbol en la Cabeza
Throttle Body Injection / Acelerador de Inyeccin de Combustible
Vehicle Identification Number / Nmero de Identificacin Vehicular
Valve
Valve Protrusion / Protuberancia de la Vlvula
Valve Recession / Recesin de la Vlvula
With / Con
Without / Sin
11
Index
Acura . ................................................................................................................... 15-16
Alfa Romeo ...........................................................................................................16-17
Allis Chalmers........................................................................................................17-26
Audi 26-29
Austin ................................................................................................................... 29-30
Bedford .......................................................................................................................30
BMW ..................................................................................................................... 30-33
Buda ..................................................................................................................... 33-36
Case ..................................................................................................................... 36-45
Caterpillar ............................................................................................................. 45-65
Checker ......................................................................................................................65
Chris-Craft In-Line ...65-66
Chrysler .............................................................................................................. 66-103
Climax ......................................................................................................................103
Continental ....................................................................................................... 103-112
Crosley .....................................................................................................................112
Cummins .......................................................................................................... 112-121
Cushman ..................................................................................................................122
Daewoo ....................................................................................................................122
Daihatsu ........................................................................................................... 122-123
DDC .................................................................................................................. 123-131
Deutz ................................................................................................................ 131-137
Ferguson ..................................................................................................................137
Ferrari .......................................................................................................................137
FIAT .................................................................................................................. 137-139
Ford .................................................................................................................. 140-182
GM .................................................................................................................... 182-239
Hanomag ..................................................................................................................239
Hatz .................................................................................................................. 239-240
Henry ................................................................................................................ 240-241
Hercules ........................................................................................................... 241-252
Hillman ............................................................................................................. 252-253
Hino ..........................................................................................................................253
Honda ............................................................................................................... 253-262
Hudson ............................................................................................................. 262-263
Hyundai ............................................................................................................ 263-265
Infiniti ........................................................................................................................266
Isuzu ................................................................................................................. 266-275
Iveco ................................................................................................................. 275-277
Jaguar .............................................................................................................. 277-278
Jeep .................................................................................................................. 278-280
John Deere ....................................................................................................... 280-296
Kaiser .......................................................................................................................297
Kawasaki ..................................................................................................................297
KIA .................................................................................................................... 297-298
Kohler ............................................................................................................... 298-303
Komatsu ........................................................................................................... 304-307
Kubota .............................................................................................................. 307-315
Leroi ................................................................................................................. 315-316
Lexus ........................................................................................................................316
Leyland .....................................................................................................................317
Liebherr ............................................................................................................ 317-318
Lister ................................................................................................................. 318-321
Lombardini ....................................................................................................... 321-323
Long ................................................................................................................. 323-324
12
Mack ................................................................................................................. 324-327

Maserati ...................................................................................................................328
Massey Ferguson ............................................................................................. 328-330
Mazda ............................................................................................................... 330-336
Mercedes Benz ................................................................................................ 336-342
Mercruiser ........................................................................................................ 342-345
MG .................................................................................................................... 345-347
Military STD ...................................................................................................... 347-348
Minn Moline ...................................................................................................... 348-351
Mitsubishi ......................................................................................................... 351-362
Murphy ............................................................................................................. 362-363
MWM ................................................................................................................ 363-364
Navistar ............................................................................................................ 364-382
Nissan .............................................................................................................. 382-394
Oliver ................................................................................................................ 394-397
OMC .........................................................................................................................397
Onan ................................................................................................................. 397-403
Opel ..........................................................................................................................403
Packard ............................................................................................................ 404-405
Perkins ............................................................................................................. 405-415
Peugeot ............................................................................................................ 416-417
Porsche ............................................................................................................ 417-421
Renault ............................................................................................................. 421-422
Reo ................................................................................................................... 422-425
Rover ................................................................................................................ 425-426
Saab ................................................................................................................. 426-428
Same ................................................................................................................ 428-429
Satoh ........................................................................................................................429
Scania .............................................................................................................. 429-430
Shibaura ...................................................................................................................430
Simca ............................................................................................................... 430-431
Slanzi ........................................................................................................................431
Sterling .....................................................................................................................431
Studebaker ....................................................................................................... 431-434
Subaru .............................................................................................................. 434-436
Superior ....................................................................................................................436
Suzuki ............................................................................................................... 436-438
Tecumseh ........................................................................................................ 438-440
Toyota .............................................................................................................. 440-451
Triumph ............................................................................................................ 451-453
Universal .......................................................................................................... 453-455
Volkswagen ...................................................................................................... 455-463
Volvo ................................................................................................................ 463-470
Waukesha ........................................................................................................ 470-484
White ................................................................................................................ 484-485
Wisconsin ......................................................................................................... 486-492
Yanmar ............................................................................................................. 492-497
Zetor .........................................................................................................................497
13
NOTES
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
14
Crankshaft Application Section

Make
Liter
CID
Vin
Model
Year
D16A1
INTEGRA
ACURA
4 Cylinders
1.6
ACURA
97
Stroke: 3.543" (89.992 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Balance: Internal
321, 4456
Casting Numbers:
Comments:
D16A1
@ #4
Thrust Width:
DOHC, MPI
ACURA
1.7
104
B17A1
ACURA
1.8
110
INTEGRA
B18C1
Stroke: 3.4330" (87.198 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
OTHRS 2.1644-2.1654" (54.976-55.001 MM)
Main 1:
#3 2.1643-2.1653" (54.973-54.999 MM)
Main:
Main 2:
Comments:
DOHC, VTEC, SFI, 1797 CC, GSR, 170 HP
ACURA
1.8
110
B18B1
ACURA
1.8
110
ACURA
1.8
INTEGRA
B18C5
INTEGRA
B18A1
ACURA
2.0
INTEGRA
122
B18C1
94-01
B18B1
97-03
B18C5
3.1890-3.1900" (81.000-81.020 MM)
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.7707-1.7717" (44.976-45.001 MM)
Rods:
#1,2,4,5 2.1644-2.1654" (54.976-55.001 MM)
Main 1:
#3 2.1642-2.1651" (54.971-54.994 MM)
Main:
Main 2:
Comments:
DOHC, MPI, 1834 CC, 130 HP * OIL CLR #3: .0012-.0019
90-94
B18A1
3.1890-3.1898" (81.001-81.021 MM)
RSX
Stroke: 3.3858" (86.000 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
1,2,4,5 2.1647-2.1657" (54.984-55.008 MM)
Main 1:
3 2.1644-2.1654" (54.976-55.000 MM)
Main:
Main 2:
Comments:
DOHC, VTEC, PGM-FI
94-00
3.1890" (81.001 MM)
Cyl Bore:
112
B17A1
3.1890" (81.001 MM)
Cyl Bore:
Stroke: 3.430" (87.200 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1643-2.1654" (54.973-55.001 MM)
Main:
Main:
Comments:
DOHC, VTEC, SPI, INTEGRA
92-93
3.1890-3.1898" (81.001-81.021 MM)
INTEGRA
Cyl Bore:
Stroke: 3.5039" (88.999 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
OTHERS 2.1644-2.1654" (54.976-55.001 MM)
Main 1:
#3 2.1642-2.1651" (54.971-54.994 MM)
Main:
Main 2:
Comments:
DOHC, SFI, USES TIGHTER INTAKE LASH
02-03
K20A2
3.3858-3.3866" (86.000-86.020 MM)
Cyl Bore:
ACURA
5 Cylinders
2.5
149
G25A4
Stroke: 3.402" (86.411 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
PGM-FI, 2.5TL
Comments:
ACURA
86-89
2.9528-2.9535" (75.001-75.019 MM)
Cyl Bore:
Stroke: 3.189" (81.001 MM)

Cyl Bore:
1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main 1:
#3 2.1642-2.1651" (54.971-54.994 MM)
Main:
Main 2:
Comments:
DOHC, MPI, 1678 CC, 160 HP, ALSO VIGOR #3 OIL CLEAR:.0012-.0019
ACURA
Engine Model
2.5
Stroke: 3.400" (86.36 MM)

1.7077-1.7717"
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
SOHC, MFI
95-98
150
G25A1
VIGOR
Cyl Bore:
15
G25A4
3.346" (84.988 MM)
Cyl Bore:
92-94
3.350" (85.09 MM)
G25A1

Make
Liter
CID
Vin
Model
Year
ACURA
6 Cylinders
2.5
ACURA
151
C25A1
Stroke: 2.953" (75.006 MM)

2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
4434
Casting Numbers:
Comments:
LEGEND
86-87
C25A1
3.3070" (83.998 MM)
Cyl Bore:
@ #3
Thrust Width:
DOHC, MFI, STERLING
ACURA
2.7
163
C27A1
LEGEND
Stroke: 2.9528" (75.000 MM)

Cyl Bore:
2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
Thrust Width:
Comments:
DOHC, MFI, 24 VALVE ENGINE THRUST BRG LENGTH STD .098
ACURA
3.0
182
C30A1
Stroke: 2.874" (73. MM)

2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.3603-2.3611" (59.952-59.972 MM)
Main:
Main:
Comments:
DOHC, MFI
ACURA
3.2
193
ACURA
3.2
193
ACURA
3.2
196
ACURA
3.2
196
3.2
196
ACURA
3.5
211
ACURA
3.5
214
LEGEND
3.5433-3.5441" (90.-90.02 MM)
Cyl Bore:
3.5433" (90. MM)
96-99
TL
01-05
C32A6
J32A3
3.5039-3.5045" (89.000-89.015 MM)
Cyl Bore:
3.5430-3.5440" (89.992-90.018 MM)
C35A1
96-98
SLX
Cyl Bore:
79
98-01
SPRINT
1.7702-1.7707" (44.963-44.976 MM)

2.3606-2.3611" (59.959-59.972 MM)
16
C35A1
3.6772-3.6783" (93.400-93.430 MM)
4 Cylinders
1.3
C32A1
Cyl Bore:
ALFA ROMEO
ALFA ROMEO
91-96
Cyl Bore:
J32A3
Stroke: 3.5827" (91.001 MM)

2.1248-2.1257" (53.97-53.993 MM)
Rods:
2.6762-2.6772" (67.975-68.001 MM)
Main:
Main:
Comments:
SFI, 3.5RL
Stroke: 3.350" (85.000 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.918-63.933 MM)
Main:
Main:
Comments:
DOHC, SFI, SLX
96-99
3.6772-3.6783" (93.401-93.429 MM)
C32A6
Stroke: 3.386" (86.000 MM)

2.1644-2.1654" (54.976-55.000 MM)
Rods:
2.8337-2.8346" (71.976-72.000 MM)
Main:
Main:
Comments:
SOHC, 60r V6, VTEC
C30A1
96-98
SLX
C32A1
Stroke: 3.3071" (84. MM)

2.1248-2.1257" (53.97-53.993 MM)
Rods:
2.6762-2.6772" (67.975-68.001 MM)
Main:
Main:
Comments:
SFI, 3.2TL
ACURA
91-95
3.6772-3.6783" (93.401-93.429 MM)
Cyl Bore:
Stroke: 3.307" (83.998 MM)

2.1248-2.1257" (53.97-53.993 MM)
Rods:
2.6762-2.6772" (67.975-68.001 MM)
Main:
Main:
Comments:
SOHC, MFI
@ #3
SLX
C27A1
3.661" (92.989 MM)
Cyl Bore:
Stroke: 3.031" (76.987 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.919-63.932 MM)
Main:
Main:
Comments:
DOHC, SFI
87-90
3.4252-3.4260" (87.-87.02 MM)
NSX
Cyl Bore:
Stroke: 3.031" (76.987 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.919-63.932 MM)
Main:
Main:
Comments:
SOHC, SFI
Rods:
Main:
Main:
Engine Model
54

Make
Liter
CID
Vin
Model
Year
ALFA ROMEO
ALFA ROMEO
4 Cylinders
1.6
96
1.8
2.0
2.0
3.0708" (77.998 MM)
Cyl Bore:
3.1496" (80.000 MM)
Thrust Width:
@ #3
69-71
119
116
Stroke: 3.480" (88.392 MM)

1.9676-1.9684" (49.977-49.997 MM)
Rods:
2.3602-2.3610" (59.949-59.969 MM)
Main:
Main:
Comments:
DOHC 2000 SPIDER
ALFA ROMEO
Cyl Bore:
110
Stroke: 3.4646" (88.000 MM)

1.9676-1.9684" (49.977-49.997 MM)
Rods:
2.3602-2.3610" (59.949-59.969 MM)
Main:
Main:
Comments:
DOHC
ALFA ROMEO
SPIDER
85-88
3.307" (83.998 MM)
Cyl Bore:
@ #3
Thrust Width:
120
SPIDER
Stroke: 3.583" (91.000 MM)

2.0000-2.0010" (50.799-50.805 MM)
Rods:
2.0864-2.0866" (52.994-53.000 MM)
Main:
Main:
Comments:
DOHC, SPIDER
Cyl Bore:
3.2677" (83.000 MM)
Thrust Width:
@ CENTER
ALFA ROMEO
ALFA ROMEO
6 Cylinders
2.5
152
119
Stroke: 2.677" (67.996 MM)

2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.3607-2.3614" (59.962-59.98 MM)
Main:
Main:
A//B8
Casting Numbers:
Comments:
MILANO
81-89
Cyl Bore:
3.4640-3.4651" (87.986-88.014 MM)
Thrust Width:
1.232-1.234 @ #4
MILANO, GT
ALFA ROMEO
3.0
181
164
Stroke: 2.677" (67.996 MM)

2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.3607-2.3614" (59.962-59.98 MM)
Main:
Main:
Comments:
MILANO, GT
MILANO
ALLIS CHALMERS
3.6608-3.6620" (92.984-93.015 MM)
Thrust Width:
1.232-1.234 @ #4
2 Cylinders
1.3
77
S126
Stroke: 3.740" (94.996 MM)

2.2819-2.2827" (57.96-57.981 MM)
Rods:
2.7543-2.7551" (69.959-69.98 MM)
Main:
Main:
TOYOSHA S126 DIESEL, MODEL 5020
Comments:
ALLIS CHALMERS
1.5
90
Stroke: 3.937" (100. MM)

2.2819-2.2827" (57.96-57.981 MM)
Rods:
2.7543-2.7551" (69.959-69.98 MM)
Main:
Main:
Comments:
TOYOSHA S148 DIESEL, MODEL 5030
5020
S148
S126
3.6220-3.6229" (91.999-92.022 MM)
.079-.098" (2.007-2.489 MM)
.079-.098" (2.007-2.489 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
5030
Cyl Bore:
Rod Fillet:
Main Fillet:
ALLIS CHALMERS
ALLIS CHALMERS
88-89
Cyl Bore:
ALLIS CHALMERS
Stroke:
Rods:
(cont.)
62-81
Stroke: 3.2283" (81.999 MM)

1.9680-1.9685" (49.987-50. MM)
Rods:
2.3606-2.3611" (59.959-59.972 MM)
Main:
Main:
105 ENGINE, GIULIA, 1600
Comments:
ALFA ROMEO
Engine Model
S148
3.8189-3.8198" (97.-97.023 MM)
.079-.098" (2.007-2.489 MM)
.079-.098" (2.007-2.489 MM)
3 Cylinders
1.0
61
3.150" (80.01 MM)

1.8882-1.8890" (47.96-47.981 MM)
2.3606-2.3614" (59.959-59.98 MM)

Main:
Main:
DIESEL, 5015 TRACTOR, TOYOSHA ENGINE
Comments:
CS100
75-82
Cyl Bore:
2.8740-2.8748" (73.-73.02 MM)
Rod Width:
1.1063-1.1102" (28.1-28.199 MM)
Thrust Width:
1.1063-1.1102
17
CS100

Make
Liter
CID
Vin
Model
ALLIS CHALMERS
ALLIS CHALMERS
Stroke:
Rods:
2.3
142
2.3
3.8580-3.8590" (98.000-98.022 MM)
Rod Width:
1.3031-1.3071" (33.100-33.200 MM)
Thrust Width:
1.3031-1.3071" (33.100-33.200 MM) @ CENTE
143
5040
143
ALLIS CHALMERS
3.7402-3.7406" (95.001-95.011 MM)
1.2597-1.2638
D15
Stroke: 4.330" (109.982 MM)

4512316
Casting Numbers:
Comments:
FIAT DIESEL
Stroke:
Rods:
152
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
82-85
D15
3.7402-3.7406" (95.001-95.011 MM)
Cyl Bore:
2.5
3S233
Cyl Bore:
Stroke: 4.330" (109.982 MM)

Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
Thrust Width:
Comments:
5040 TRACTOR, FIAT DIESEL, ALSO MINN MOLINE * 2 STD. LINERS.
2.3
(cont.)
6140
2.7543-2.7551" (69.960-69.980 MM)

Main:
Main:
DIESEL, 6140 TRACTOR, 3S233 ENGINE
Comments:
ALLIS CHALMERS
Engine Model
3 Cylinders
4.055" (103.000 MM)

2.2819-2.2827" (57.960-57.980 MM)
ALLIS CHALMERS
Year
160
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.720" (39.675-43.688 MM)
.094-.109" (2.388-2.769 MM)
1.8427-1.8457" *
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN. (133.172 MM)
Rear Seal Diameter:
467, SD260034
Casting Numbers:
Comments:
PERKINS D3.152 DIESEL, 160 TRACTOR * LIP TYPE R/MAIN SEAL, ROPE SEAL WIDTH=1.883-1.889"
ALLIS CHALMERS
2.6
158
5045
Stroke: 4.330" (109.982 MM)

2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
Comments:
5045 + 5050 TRACTOR, FIAT DIESEL
Cyl Bore:
3.9375" (100.013 MM)
Thrust Width:
1.2597-1.2638
ALLIS CHALMERS
ALLIS CHALMERS
4 Cylinders
0.4
25
Stroke: 4.000" (101.6 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
1 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
2-3 2.4770-2.4780" (62.916-62.941 MM)
Main 2:
213353, 226526, 226535, U3986
Casting Numbers:
ALLIS CHALMERS
1.0
60
1.0
Comments:
1.9
60
62
60H
3.375" (85.725 MM)
Cyl Bore:
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
162C-500, N62A500, N62C-500
Casting Numbers:
Comments:
G GAS TRACTOR, CONTINENTAL
ALLIS CHALMERS
4.000" (101.6 MM)
Cyl Bore:
Stroke: 3.500" (88.9 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
206638, 207145, 213352
Casting Numbers:
Comments:
60H DIESEL
ALLIS CHALMERS
25
G
2.375" (60.325 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.753 @ #1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
116
*
Rod Width:
GAS, B TRACTOR, BE ENGINE * ROD HOUSING BORES -.005" (.127 MM) SMALLER THAN THE CORRECT
NUMBER. REPORTED MEMBER # 26775 08-24-2004 MC
18
BE

Make
Liter
CID
Vin
Model
Year
ALLIS CHALMERS
ALLIS CHALMERS
4 Cylinders
1.9
116
Stroke: 3.500" (88.9 MM)

1.9365-1.9375" (49.187-49.213 MM) *
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
206638, 207145, 213352
Casting Numbers:
Comments:
Engine Model
(cont.)
B
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
BE
3.250" (82.55 MM)
.094" (2.388 MM)
.094" (2.338 MM)
1.5060" OR 1.6310"
GAS, B TRACTOR, BE ENGINE * CAUTION CHECK ROD HOUSING BORES -.005" (.127 MM) SMALLER THAN
THE CORRECT NUMBER. REPORTED MEMBER # 26775 08-24-2004 MC
ALLIS CHALMERS
2.0
120
Stroke: 3.500" (88.9 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
206638, 207145, 213352
Casting Numbers:
Comments:
B & C TRACTORS
ALLIS CHALMERS
2.1
125
Stroke: 3.500" (88.9 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
206638, 207145, 213352
Casting Numbers:
Comments:
GAS, B, C & CA TRACTOR
ALLIS CHALMERS
2.1
125
RC
2.2
139
ALLIS CHALMERS
2.3
2.4
D10 & D12

Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.375" (85.725 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.5060
Cyl Bore:
Rod Fillet:
Main Fillet:
4.250" (107.95 MM)

.125" (3.175 MM)
.125" (3.175 MM)
149
D10 & D12
Stroke: 3.875" (98.425 MM)

Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
Rods:
Rod Fillet:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.3750" (85.725 MM)
Rear Seal Diameter:
227550
Casting Numbers:
Comments:
SERIES III D10 & D12,AFTER SER# D10-3500 & D123000
ALLIS CHALMERS
2.4
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
3.3750" (85.725 MM)
Rear Seal Diameter:
227550
Casting Numbers:
Comments:
D-14 GAS TRACTOR
3.375" (85.725 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.506"
D10 & D12
142
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
#1 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main: Numbers:
5154184, U3967
Casting
ALLIS CHALMERS
3.375" (85.725 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.506" (38.252 MM)
RC
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
3.3750" (85.725 MM)
Rear Seal Diameter:
227550
Casting Numbers:
Comments:
GAS D10 AND D12, PRIOR-SER #D10-3501 & D123001
3.250" (82.55 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.5060
B&C
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.500" (88.9 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
206638, 207145, 213352
Casting Numbers:
Comments:
GAS, RC TRACTOR
ALLIS CHALMERS
B&C
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
149
D10 & D12
3.4995-3.5005" (88.887-88.913 MM)

.094" (2.388 MM)
.094
1.5060
D14
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
19
D14
3.4995-3.5005" (88.887-88.913 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.5060

Make
Liter
CID
Vin
Model
ALLIS CHALMERS
ALLIS CHALMERS
Engine Model
4 Cylinders
2.4
149
D15
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
3.3750" (85.725 MM)
Rear Seal Diameter:
227550
Casting Numbers:
Comments:
Year
(cont.)
D15
D15
3.500" (88.9 MM)
3/32 (NM)
3/32
1.5060
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
D-15 GAS TRACTOR
ALLIS CHALMERS
2.5
153
153
Stroke: 4.1250"
Cyl Bore:
1.9975-1.9985" (50.737-50.762 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4303200, 4503200, 4512316, 4512978, B-2097W, B-3200
Casting Numbers:
ALLIS CHALMERS
2.5
153
153
3.4373-3.4388" (87.307-87.346 MM)
153
153
3.4373-3.4388" (87.307-87.346 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9970-1.9985" (50.724-50.762 MM)
.100-.125" (2.54-3.175 MM)
Rods:
Rod Fillet:
2.4965-2.4980" (63.411-63.449 MM)
.100-.125" (2.540-3.175 MM)
Main:
Main Fillet:
1.875-1.879
Main:
Thrust Width:
4303200, 4503200, 4512316, 4512978, 4515005, B-2097-W, B-3200
Casting Numbers:
Comments:
FORKLIFT, TRACTOR
ALLIS CHALMERS
2.5
153
Stroke: 4.125" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4303200, 4512316, B2097W, B3200
Casting Numbers:
Comments:
FORKLIFT
ALLIS CHALMERS
Stroke:
Rods:
2.6
160
G1600
3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
2.9
175
Stroke: 4.375" (111.125 MM)

1.9970-1.9985" (50.724-50.762 MM)
Rods:
2.4965-2.4980" (63.411-63.449 MM)
Main:
Main:
4503200, 4512316, B-2097W, B-3200, B-5960
Casting Numbers:
Comments:
D-15 DIESEL
ALLIS CHALMERS
2.9
3.2
ALLIS CHALMERS
3.3
D-15 DIESEL
3.5625" (90.488 MM)
.100-.125" (2.54-3.175 MM)
.100-.125" (2.540-3.175 MM)
1.875-1.879
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.563" (90.5 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.8780
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
2.0630
200
Stroke: 4.250" (107.95 MM)

2.3725-2.3735" (60.262-60.287 MM)
Rods:
2.7465-2.7480" (69.761-69.799 MM)
Main:
Main:
4020230
Casting Numbers:
Comments:
BORE 3.875" X STROKE 4.250" EARLY STYLE
Stroke: 4.250" (107.95 MM)

2.3725-2.3735" (60.262-60.287 MM)
Rods:
2.7465-2.7480" (69.761-69.799 MM)
Main:
Main:
4020230, 4020345
Casting Numbers:
Comments:
443T DIESEL
D15
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
175
Stroke: 4.375" (111.125 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4303200, 4512316, B2097W, B3200
Casting Numbers:
ALLIS CHALMERS
D15 SERIES II
3.6245-3.6255" (92.062-92.088 MM)
.094" (2.388 MM)
1.450" (36.83 MM)
.094" (2.388 MM)
1.506 @ #2
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.7480-2.7490" (69.799-69.825 MM)

Main:
Main:
3.3750" (85.725 MM)
Rear Seal Diameter:
227550
Casting Numbers:
Comments:
G1600 GAS, D15 SERIES II
ALLIS CHALMERS
4.438" (112.725 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.8780
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
W/OIL HOLE & 3.719" FLANGE
200
443
Cyl Bore:
20
443T
3.8750" (98.425 MM)

Make
Liter
CID
Vin
Model
Year
ALLIS CHALMERS
ALLIS CHALMERS
4 Cylinders
3.3
200
Stroke: 4.250" (107.95 MM)

2.3720-2.3735" (60.249-60.287 MM)
Rods:
2.7465-2.7480" (69.761-69.799 MM)
Main:
Main:
4006908, 4007915, 4008043, 4008078
Casting Numbers:
Comments:
Engine Model
(cont.)
6060
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
433T
3.8755-3.8770" (98.438-98.476 MM)
.200-.215" (5.08-5.461 MM)
.200-.215" (5.080-5.461 MM)
2.061-2.063
6060, 6070, & 433I 6080 TRACTOR, F2 COMBINE
ALLIS CHALMERS
3.3
200
HD4
Stroke: 4.000" (101.6 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
#2 2.4770-2.4780" (62.916-62.941 MM)
Main:
Main 2:
226526, U3086, U3186, U3194, U3986
Casting Numbers:
Comments:
BORE 4.000" X STROKE 4.000" HD-4
ALLIS CHALMERS
3.3
201
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
WC
4.000" (101.6 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.6310
WC & WF
4.000" (101.6 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3740-2.3750*" (60.3-60.325 MM)
Rods:
FRONT 2.9990-3.0000" (76.175-76.2 MM)
Main 1:
CENTR 2.4770-2.4780" (62.916-62.941 MM)
Main:
Main 2:
REAR 2.4770-2.4780" (62.916-62.941 MM)
Main 3:
229022, 3986, U3086, U3186, U3194, U3986
Casting Numbers:
Comments:
GAS, WC & WF TRACTORS *PRIOR-SER #3665:ROD JOURN DIAM=1.9990-2.0000
ALLIS CHALMERS
3.3
201
WD
WD
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
FRONT 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
CENTR 2.4770-2.4780" (62.916-62.941 MM)
Main:
Main 2:
REAR 2.4770-2.4780" (62.916-62.941 MM)
Main 3:
22623, 226526, 3986, U3086, U3186, U3194, U3986
Casting Numbers:
Comments:
GAS, WD TRACTORS
ALLIS CHALMERS
Stroke:
Rods:
3.6
220
D346
4.690" (119.126 MM)

2.4360-2.4370" (61.874-61.9 MM)
2.9974-2.9984" (76.134-76.159 MM)

Main:
Main:
216011
Casting Numbers:
Comments:
NON-TURBO DIESEL
ALLIS CHALMERS
Stroke:
Rods:
3.6
3.7
Rod Width:
1.3750-1.3790" (34.925-35.027 MM)
Thrust Width:
1.5025-1.5045
3.8750-3.8760" (98.425-98.45 MM)
Rod Width:
1.3750-1.3790" (34.925-35.027 MM)
Thrust Width:
1.5025-1.5045
170 & 175

4.0000-4.0010" (101.6-101.625 MM)
Cyl Bore:
226
Stroke: 4.500" (114.3 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
#1 2.4355-2.4365" (61.862-61.887 MM)
Main:
Main:
2, 226526, 226535, 229022, U-3986
Casting Numbers:
Comments:
GAS, D17 SERIES IV TRACTOR
D346T
Cyl Bore:
226
Stroke: 4.500" (114.3 MM)

2.3745-2.3755" (60.312-60.338 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
229022, 241291
Casting Numbers:
Comments:
GAS, MODEL 170 & 175
ALLIS CHALMERS
3.8750-3.8760" (98.425-98.45 MM)
D346T
2.9974-2.9984" (76.134-76.159 MM)

Main:
Main:
216011
Casting Numbers:
Comments:
TURBO DIESEL
3.7
D346
Cyl Bore:
220
4.690" (119.126 MM)

2.4360-2.4370" (61.874-61.9 MM)
ALLIS CHALMERS
4.000" (101.6 MM)
D17
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
21
54-57
D17 SERIES IV
4.0000-4.0010" (101.6-101.625 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.502

Make
Liter
CID
Vin
Model
Year
ALLIS CHALMERS
ALLIS CHALMERS
4 Cylinders
3.7
226
Stroke: 4.500" (114.3 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
FRONT 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
CENTR 2.4770-2.4780" (62.916-62.941 MM)
Main 2:
REAR 2.4770-2.4780" (62.916-62.941 MM)
Main 3:
226535
Casting Numbers:
Comments:
Engine Model
(cont.)
WD45
WD45
4.0000" (101.6 MM)
Cyl Bore:
GAS, WD45 TRACTOR
ALLIS CHALMERS
3.9
236
170 & 175
Stroke: 5.000" (127. MM)

2.4990-2.4995" (63.475-63.487 MM)
Rods:
2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
31315881
Casting Numbers:
Comments:
DIESEL, PERKINS, MODEL 170 & 175
ALLIS CHALMERS
5.6
3.8770-3.8780" (98.476-98.501 MM)
Cyl Bore:
344
6000
HD6
4.438" (112.725 MM)

Stroke: 5.563" (141.3 MM)
Cyl Bore:
2.7710-2.7725" (70.383-70.422 MM)
.167-.197" (4.242-5.004 MM)
Rods:
Rod Fillet:
3.4980-3.4990" (88.849-88.875 MM)
.167-.197
Main:
Main Fillet:
2.688-2.692
Main:
Thrust Width:
4348399, 4348425, 4348525, 4354423, 4354426, 4357331, 4359794, 4359796, 4359873, 4359874
Casting Numbers:
Comments:
HD-6
ALLIS CHALMERS
Stroke:
Rods:
5.6
344
HD
5.962" (151.435 MM)

2.7715-2.7725" (70.396-70.422 MM)
3.4980-3.4990" (88.849-88.875 MM)

Main:
Main:
4348399, 4348425, 4348525
Casting Numbers:
Comments:
HD-6 DIESEL
ALLIS CHALMERS
5.6
HD6
4.4370-4.4385" (112.7-112.738 MM)
Rod Width:
1.750-1.754" (44.45-44.552 MM)
Thrust Width:
2.688-2.692
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.438" (112.725 MM)

.109" (2.769 MM)
.125
2.6900
344
Stroke: 5.563" (141.3 MM)

2.7715-2.7725" (70.396-70.422 MM)
Rods:
#1 3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
4348399, 4348425, 4348525
Casting Numbers:
ALLIS CHALMERS
ALLIS CHALMERS
Stroke:
Rods:
6 Cylinders
3.8
230
4.125" (104.775 MM)

1.9970-1.9985" (50.724-50.762 MM)
230
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.4965-2.4980" (63.411-63.449 MM)

Main:
Main:
4502106, 4514465
Casting Numbers:
Comments:
HD6
Cyl Bore:
230
3.4373-3.4386" (87.307-87.34 MM)
.100-.125" (2.54-3.175 MM)
1.500-1.504" (38.1-38.202 MM)
.100-.125
1.8750-1.8790
GAS
ALLIS CHALMERS
3.8
230
D17
D-17
3.437" (87.3 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9970-1.9985" (50.724-50.762 MM)
.100-.125" (2.54-3.175 MM)
Rods:
Rod Fillet:
2.4965-2.4980" (63.411-63.449 MM)
.100-.125
Main:
Main Fillet:
1.875-1.879
Main:
Thrust Width:
4502106, 4502107, 4505959, 4507700, 4514465, 4514466, 4514467, B-2106, B-2107
Casting Numbers:
Comments:
D-17 DIESEL
ALLIS CHALMERS
3.8
230
G-230
4.1250" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM)
3.4378-3.4388" (87.32-87.346 MM)

Cyl Bore:
.094" (2.388 MM)
Rod Fillet:
1.500-1.504" (38.1-38.202 MM)
Rod Width:
ALL 2.4970-2.4980" (63.424-63.449 MM)
.094
Main:
Main Fillet:
1.8750-1.8790
Main:
Thrust Width:
4502106, 4502107, 4502T06, 4507700, 4514465, 4519465, B2106, B2107
Casting Numbers:
Comments:
GAS
Stroke:
Rods:
22
G-230

Make
Liter
CID
Vin
Model
ALLIS CHALMERS
ALLIS CHALMERS
Year
Engine Model
6 Cylinders
3.8
230
(cont.)
WD45
WD45
3.4375" (87.313 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9975-1.9985" (50.737-50.762 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4502106, 4502107, 4505959, 4507700, 4514465, 4514467, B-2106, B-2107
Casting Numbers:
Comments:
DIESEL, WD45 TRACTOR
ALLIS CHALMERS
4.3
262
D17
D17 & D19
3.5625" (90.488 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9970-1.9985" (50.724-50.762 MM)
.100-.125" (2.54-3.175 MM)
Rods:
Rod Fillet:
2.4965-2.4980" (63.411-63.449 MM)
.100-.125
Main:
Main Fillet:
1.875-1.879
Main:
Thrust Width:
4502106, 4502107, 4505959, 4507700, 4514465, 4514467, B2106, B2107
Casting Numbers:
Comments:
DIESEL, D17 & D19 TRACTOR
ALLIS CHALMERS
Stroke:
Rods:
4.3
262
D19
4.375" (111.125 MM)

1.9975-1.9985" (50.737-50.762 MM)
2.4970-2.4980" (63.424-63.449 MM)

Main:
Main:
4020345, 4507700, B2106, B2107
Casting Numbers:
Comments:
D-19 DIESEL TRACTOR
ALLIS CHALMERS
Stroke:
Rods:
4.3
262
4.3
Rod Width:
1.500-1.504" (38.1-38.202 MM)
Thrust Width:
2.0630
D19
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.4965-2.4980" (63.411-63.449 MM)

Main:
Main:
4507700, 4515927
Casting Numbers:
Comments:
GAS, D-19 TRACTOR
ALLIS CHALMERS
3.5623-3.5638" (90.482-90.521 MM)
4.375" (111.125 MM)

1.9970-1.9985" (50.724-50.762 MM)
265
4.5
273
D-19 GAS
3.5623-3.5638" (90.482-90.521 MM)
.100-.125" (2.54-3.175 MM)
1.500-1.504" (38.1-38.202 MM)
.100-.125
1.875-1.879
2500
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.3720-2.3735" (60.249-60.287 MM)
Rods:
Rod Fillet:
2.7465-2.7480" (69.761-69.799 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4008148, 4020344, 4020345, 4022256, 4022301, 4022490
Casting Numbers:
Comments:
GAS, 180, 185, 190 TRACTOR
ALLIS CHALMERS
D-19 DIESEL
Cyl Bore:
3.750" (95.25 MM)

.200-.215" (5.08-5.461 MM)
.200-.215
2.061-2.064
273
273
3.750" (95.25 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9975-1.9985" (50.737-50.762 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4502106, 4502107, 4505959, 4507700, 4514465, 4514467, B2106, B2107
Casting Numbers:
ALLIS CHALMERS
4.5
273
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9975-1.9985" (50.737-50.762 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4502106, 4502107, 4507700, 4514465, 4519465, B2106, C2107
Casting Numbers:
ALLIS CHALMERS
4.9
301
3.750" (95.25 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.8780
180
2800
3.8750" (98.425 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.3720-3.3735" (60.249-85.687 MM)
.150-.165*" (3.81-4.191 MM)
Rods:
Rod Fillet:
1 2.7465-2.7480" (69.761-69.799 MM)
.150-.165*
Main:
Main Fillet:
2.061-2.064
Main:
Thrust Width:
4020345, 4022256, 4022256
Casting Numbers:
Comments:
2800 DIESEL, 180, 185, & 190 TRACTORS * LATER CRANKSHAFTS ARE .200-.215"
ALLIS CHALMERS
4.9
Stroke: 4.250" (107.95 MM)

2.3720-2.3735" (60.249-60.287 MM)
Rods:
2.7465-2.7480" (69.761-69.799 MM)
Main:
Main:
4020345, 4022491
Casting Numbers:
Comments:
G2800XT GAS, 190XT TRACTOR
301
190XT
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
23
2800
3.875" (98.425 MM)
.150-.165" (3.81-4.191 MM)
.150-.165
2.061-2.064

Make
Liter
CID
Vin
Model
Year
ALLIS CHALMERS
ALLIS CHALMERS
Stroke:
Rods:
6 Cylinders
4.9
301
4.2500" (107.95 MM)

2.3725-2.3735" (60.262-60.287 MM)
(cont.)
200
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.7465-2.7480" (69.761-69.799 MM)

Main:
Main:
4008146, 4022256, 4022256, 4023823
Casting Numbers:
Comments:
Engine Model
2900
3.8750" (98.425 MM)

.150-.165" (3.81-4.191 MM)
1.4985-1.5015" (38.062-38.138 MM)
.150-.165*
2.061-2.065 @#4
2900 DIESEL, 200 & 7000 TRACTOR * LATER CRANKSHAFTS ARE .200-.215"
ALLIS CHALMERS
4.9
301
7010
Stroke: 4.250" (107.95 MM)

Cyl Bore:
2.3720-2.3735" (60.249-60.287 MM)
Rods:
Rod Fillet:
2.7465-2.7480" (69.761-69.799 MM)
Main:
Main Fillet:
Main:
Thrust Width:
40081456
Casting Numbers:
Comments:
TURBO DIESEL,545B LOADER,MODEL 7010,7020,8010,649I
ALLIS CHALMERS
7.0
426
3400
Stroke: 5.000" (127. MM)

Cyl Bore:
2.7470-2.7480" (69.774-69.799 MM)
Rods:
Rod Fillet:
#1 3.2465-3.2480" (82.461-82.499 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4025042, 4025478, 4027134, 4028608, 4029065
Casting Numbers:
Comments:
3400,3500 MARK II,670T,3700,3750 MARKII,7030, 7080
ALLIS CHALMERS
7.0
426
7.0
426
70-85
670T
4.2495-4.2510" (107.937-107.975 MM)

.141-.171" (3.581-4.343 MM)
.141-.171" (3.581-4.343 MM)
2.061-2.063 @#4
3400
Stroke: 5.000" (127. MM)

Cyl Bore:
2.7470-2.7480" (69.774-69.799 MM)
Rods:
Rod Fillet:
#1 3.2465-3.2480" (82.461-82.499 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4025042, 4025478, 4027134, 4028608, 4029065
Casting Numbers:
Comments:
3400, 3500 DIESEL, D21 SERIES II, 210 & 220
ALLIS CHALMERS
649T
3.8770-3.8775" (98.476-98.489 MM)
.078-.094" (1.981-2.388 MM)
.078-.094
2.063
70-85
D21 SERIES II
4.250" (107.95 MM)

.141-.171" (3.581-4.343 MM)
.141-.171" (3.581-4.343 MM)
2.061-2.063
8030
670I & 670T
4.2495-4.2510" (107.937-107.975 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7475-2.7485" (69.787-69.812 MM)
SHOT PEENED *
Rods:
Rod Fillet:
3.2465-3.2480" (82.461-82.499 MM)
SHOT PEENED *
Main:
Main Fillet:
2.061-2.063
Main:
Thrust Width:
4035936, 4035953, 4037168
Casting Numbers:
Comments:
670I/670T DIESEL, 8030, 8050, 8070 SERIES TRACTORS * FILLET RADIUS: PIN .141-.171, MAIN .190-.220
ALLIS CHALMERS
7.0
426
Stroke: 5.000" (127. MM)

2.7470-2.7480" (69.774-69.799 MM)
Rods:
#1 3.2465-3.2480" (82.461-82.499 MM)
Main:
Main:
4025042
Casting Numbers:
Comments:
D-21 DIESEL
ALLIS CHALMERS
8.5
D-21
D21
516
70-70
D21
4.250" (107.95 MM)
Cyl Bore:
10000
10000
4.438" (112.725 MM)

Stroke: 5.563" (141.3 MM)
Cyl Bore:
2.7715-2.7725" (70.396-70.422 MM)
.167-.197" (4.242-5.004 MM)
Rods:
Rod Fillet:
3.4975-3.4990" (88.837-88.875 MM)
.167-.197" (4.242-5.004 MM)
Main:
Main Fillet:
2.688-2.692
Main:
Thrust Width:
4337719, 4347501, 4354424, 4354425, 4357323, 4357324, 4357334
Casting Numbers:
ALLIS CHALMERS
8.5
516
11000
Stroke: 5.563" (141.3 MM)

Cyl Bore:
2.7715-2.7725" (70.396-70.422 MM)
Rods:
Rod Fillet:
3.4975-3.4990" (88.837-88.875 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4347501, 4354425, 43557789, 4357323, 4357324, 4357334
Casting Numbers:
Comments:
11000 DIESEL
ALLIS CHALMERS
8.5
516
Stroke: 5.563" (141.3 MM)

2.7115-2.7125" (68.872-68.898 MM)
Rods:
#1 3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
4347501
Casting Numbers:
Comments:
HD-11, 11000 DIESEL SEE 10.2L AS WELL
11000
4.4380" (112.725 MM)
.167-.197" (4.242-5.004 MM)
.167-.197" (4.242-5.004MM)
2.688-2.692
11000
HD11
Cyl Bore:
4.438" (112.725 MM)
Thrust Width:
2.690
24

Make
Liter
CID
Vin
Model
Year
ALLIS CHALMERS
ALLIS CHALMERS
6 Cylinders
8.5
516
Stroke: 5.562" (141.275 MM)

2.7710-2.7725" (70.380-70.420 MM)
Rods:
3.4975-3.4990" (88.841-88.875 MM)
Main:
Main:
DIESEL, 745HB TRACTOR, HD11EP CRAWLER
Comments:
ALLIS CHALMERS
10.2
ALLIS CHALMERS
12.0
12.7
Comments:
2.688-2.692" (68.280-68.360 MM)
HD11
HD11
Cyl Bore:
4.875" (123.825 MM)
Thrust Width:
2.6900
6120T
6120T
5.2510-5.2525" (133.375-133.414 MM)
.235-.265" (5.969-6.731 MM)
2.1235-2.1265" (53.937-54.013 MM)
.235-.265
3.250-3.252
HD21
Cyl Bore:
Rod Fillet:
Main Fillet:
HD21
5.250" (133.35 MM)
.172" (4.369 MM)
.188
HD-21, 4 VALVE HEAD SEE BUDA AS WELL
ALLIS CHALMERS
13.1
799
Stroke: 6.500" (165.1 MM)

3.3715-3.3730" (85.636-85.674 MM)
Rods:
3.9945-3.9960" (101.46-101.498 MM)
Main:
Main:
4388249, 4390223, 4391068, 4391187
Casting Numbers:
Comments:
MKII, FIAT ALLIS
ALLIS CHALMERS
13.8
19000
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
844
Stroke: 6.500" (165.1 MM)

3.3060-3.3070" (83.972-83.998 MM)
Rods:
#1 3.8905-3.8915" (98.819-98.844 MM)
Main:
Main: Numbers:
05844, 4361324, 4361324, 4371087, O5844
Casting
Comments:
Thrust Width:
779
Stroke: 6.000" (152.4 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
#1 3.7450-3.7460" (95.123-95.148 MM)
Main:
Main: Numbers:
4361324, 4371093, 4371094
Casting
685
4.4370-4.4385" (112.700-112.738 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.9945-3.9960" (101.46-101.498 MM)

Main:
Main:
4395458, 4395630
Casting Numbers:
Comments:
MODEL 8550 DIESEL
ALLIS CHALMERS
745HB
731
5.6299" (142.999 MM)

3.3715-3.3730" (85.636-85.674 MM)
(cont.)
Cyl Bore:
624
Stroke: 5.563" (141.3 MM)

2.7715-2.7725" (70.396-70.422 MM)
Rods:
#1 3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
4347501
Casting Numbers:
Comments:
HD-11 THRUST WASHERS
Stroke:
Rods:
Engine Model
19000 MKII
5.250" (133.35 MM)
.235-.265" (5.969-6.731 MM)
.235-.265" (5.969-6.731 MM)
3.250-3.252 @ #4
16000T
Cyl Bore:
Rod Fillet:
Main Fillet:
16000T, 17000
5.2500" (133.35 MM)

.172" (4.369 MM)
.188
16000T, 17000 MKII, 4 VALVE HEAD W/THIN MAIN BEARINGS
ALLIS CHALMERS
13.8
844
21000
21000 MKII
6.000" (152.4 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.3715-3.3735" (85.636-85.687 MM)
.235-.265" (5.969-6.731 MM)
Rods:
Rod Fillet:
3.9945-3.9960" (101.46-101.498 MM)
.235-.265" (5.969-6.731 MM)
Main:
Main Fillet:
3.250-3.252
Main:
Thrust Width:
4388251, 4390219, 4390221, 4390240, 4390241, 4390415, 4390803, 4391186, 4391953, 4392082,
Casting Numbers:
4394647, 4394696, 4395184, 4395876, 4396001
Comments:
MKII, FIAT ALLIS
ALLIS CHALMERS
13.8
844
25000
6.000" (152.4 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.3715-3.3735" (85.636-85.687 MM)
.235-.265" (5.969-6.731 MM)
Rods:
Rod Fillet:
3.9945-3.9960" (101.46-101.498 MM)
.235-.265" (5.969-6.731 MM)
Main:
Main Fillet:
3.250-3.252
Main:
Thrust Width:
4388251, 4390219, 4390221, 4390240, 4390241, 4390415, 4391186, 4391953, 4392082, 4394647,
Casting Numbers:
4394696, 4395184, 4395456, 4395623, 4395876, 4396001
Comments:
LARGE DIESEL, MKII, FIAT ALLIS
25
25000 MKII

Make
Liter
CID
Vin
Model
Year
ALLIS CHALMERS
ALLIS CHALMERS
Stroke:
Rods:
6 Cylinders
13.8
844
6138T
6.5000" (165.1 MM)

3.3715-3.3730" (85.636-85.674 MM)
3.9945-3.9960" (101.46-101.498 MM)

Main:
Main:
4395458, 4395630
Casting Numbers:
Comments:
ALLIS CHALMERS
14.7
262B
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
5.2510-5.2525" (133.375-133.414 MM)

.235-.265" (5.969-6.731 MM)
2.1235-2.1265" (53.937-54.013 MM)
.235-.265
3.250-3.252
Cyl Bore:
Rod Fillet:
Main Fillet:
5.625" (142.875 MM)

.172" (4.369 MM)
.188
Cyl Bore:
Rod Fillet:
Main Fillet:
5.625" (142.875 MM)

.172" (4.369 MM)
.188
896
ALLIS CHALMERS
15.9
971
Stroke: 6.500" (165.1 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
#1 3.7450-3.7460" (95.123-95.148 MM)
Main:
Main:
4361324, 4371087, DE61324, O5844
Casting Numbers:
ALLIS CHALMERS
34.4
2,100
2100
Stroke: 6.500" (165.1 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
3.7450-3.7460" (95.123-95.148 mm)
Main:
Main:
Comments:
HD-21
Cyl Bore:
HD21
5.250" (133.35 MM)
AUDI
4 Cylinders
1.5
AUDI
90
XV
Stroke: 3.150" (80.01 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
391101, A1456
Casting Numbers:
AUDI
1.6
97
1.6
97
3.150" (80.01 MM)
Cyl Bore:
3.012" (76.505 MM)
1.7
1.8
1.8
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, GAS
75-80
82-83
Thrust Width:
@ #3
105
81-83
Cyl Bore:
Thrust Width:
109
JN
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
EFI GAS, 4000S *WEAR LIMIT .010
AUDI
Cyl Bore:
CR
Stroke: 3.401" (86.385 MM)

1.8086-1.8094" (45.938-45.959 MM)
Rods:
#1 2.1243-2.1248" (53.957-53.97 MM)
Main:
Main:
049F, 391101, A1456
Casting Numbers:
Comments:
EFI, VW ENGINE, WATER COOLED
AUDI
2.992" (75.997 MM)
YG
Stroke: 3.402" (86.411 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
DIESEL, TURBO, CY, JK
AUDI
73-74
Cyl Bore:
EFI, XW, XY, XZ, ZD, ZE
Stroke: 3.150" (80.01 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
391101, A1456
Casting Numbers:
Comments:
EFI, YH, YK, YM
AUDI
(cont.)
262B SCRAPPER, 21C
Stroke: 6.000" (152.4 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
#1 3.7450-3.7460" (95.123-95.148 MM)
Main:
Main: Numbers:
4371093, 4371094
Casting
Comments:
Engine Model
109
3.130" (79.502 MM)
@ #3
4000 SERIES
84
Cyl Bore:
3.189" (81.001 MM)
Cyl Bore:
3.189" (81.001 MM)
MG
85-87
Thrust Width:
26
@ #3

Make
Liter
CID
Vin
Model
Year
AUDI
AUDI
4 Cylinders
1.8
109
AEB
Stroke: 3.4020" (86.400 MM)

1.8819" (47.800 MM)
Rods:
2.1260" (54.000 MM)
Main:
Main:
DOHC, TURBO, 5 VALVE PER CHAMBER
Comments:
AUDI
1.8
1.8
112
1.9
1.9
114
2.0
114
AUDI
2.0
Cyl Bore:
3.189" (81.001 MM)
Cyl Bore:
3.307" (83.998 MM)
Cyl Bore:
3.307" (83.998 MM)
121
121
86-88
73
ZJ
74-77
3A
Stroke: 3.650" (92.71 MM)

1.8827-1.8835" (47.821-47.841 MM)
Rods:
2.1268-2.1276" (54.021-54.041 MM)
Main:
Main:
Comments:
SOHC, MFI, 80 SERIES CAR
Stroke:
Rods:
3.189" (81.001 MM)
ZL
Stroke: 3.307" (83.998 MM)

1.8878-1.8885" (47.95-47.968 MM)
Rods:
2.3602-2.3610" (59.949-59.969 MM)
Main:
Main:
059A, 059D, 101A
Casting Numbers:
Comments:
EFI, ZN, ZU, ZZ
AUDI
Cyl Bore:
DOHC
Stroke: 3.307" (83.998 MM)

1.8878-1.8885" (47.95-47.968 MM)
Rods:
2.3602-2.3610" (59.949-59.969 MM)
Main:
Main:
059A, 059D, 101A
Casting Numbers:
Comments:
2BC, ZW
AUDI
3.1890" (81.000 MM)
84-87
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
DOHC
AUDI
80 SERIES
#1 2.1581-2.1587" (54.816-54.831 MM)

Main:
Main:
064105101
Casting Numbers:
Comments:
JEEP, OHC
3.250" (82.55 MM)
Thrust Width:
@ CENTER
Cyl Bore:
3.3996-3.4057" (86.35-86.505 MM)
Rod Width:
1.102-1.111" (27.991-28.219 MM)
77-79
Thrust Width:
@ #3
AUDI
5 Cylinders
2.0
121
Stroke: 3.402" (86.411 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
DIESEL, TURBO & NON-TURBO, 5000
Comments:
AUDI
2.0
121
2.1
5000 SERIES
Cyl Bore:
Thrust Width:
Thrust Width:
131
@ #4
82-85
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
GAS, EFI, 5000, TURBO & NON TURBO, WE, WK
80-83
3.012" (76.505 MM)
DE
Stroke: 3.402" (86.411 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
TURBO DIESEL
AUDI
88-90
Cyl Bore:
A/J
3.32" (84.328 MM)

1.8882-1.8888" (47.96-47.976 MM)
AUDI
(cont.)
96-03
Cyl Bore:
112
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
SOHC
AUDI
Engine Model
WD
3.012" (76.505 MM)
@ #4
5000 SERIES
Cyl Bore:
27
78-83
3.150" (80.01 MM)
AEB

Make
Liter
CID
Vin
Model
Year
AUDI
AUDI
5 Cylinders
2.1
131
KH
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
AUDI
2.2
136
KX
2.2
136
2.2
KZ
2.2
MC
136
2.3
2.3
2.3
91-92
NG
3.190" (81.026 MM)
COUPE
7A
141
NF
89-91
3.268" (83.007 MM)
QUATTRO
87-91
3.250" (82.55 MM)
Cyl Bore:
Thrust Width:
AUDI
AUDI
@ #4
COUPE
Cyl Bore:
Stroke: 3.400" (86.36 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
MFI, QUATTRO, 100
87-92
3.250" (82.55 MM)
Thrust Width:
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
EFI, COUPE, QUATTRO
AUDI
@ #4
3B
Cyl Bore:
141
86-91
3.189" (81.001 MM)
Thrust Width:
Stroke: 3.400" (86.36 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
MFI, COUPE, 90 QUATTRO
AUDI
@ #4
5000 SERIES
Cyl Bore:
Cyl Bore:
141
85-86
3.150" (80.01 MM)
Thrust Width:
Stroke: 3.340" (84.836 MM)

1.8094-1.8102" (45.959-45.979 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
SOHC, EFI, TURBO, GAS
AUDI
@ #4
5000 SERIES
Cyl Bore:
136
83-87
3.189" (81.001 MM)
Thrust Width:
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
SOHC, MFI, TURBO, 5000CS, 200, QUATTRO
AUDI
5000 SERIES
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
EFI, 5000S, WAGON
AUDI
84-86
3.189" (81.001 MM)
EFI, GAS, 5000 TURBO & NON TURBO
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
035D
Casting Numbers:
Comments:
MFI, GT COUPE, JT/5000S *WEAR LIMIT .010
AUDI
5000 SERIES
Cyl Bore:
@ #4
6 Cylinders
2.7
163
Stroke: 3.400" (86.400 MM)

2.1244-2.1251" (53.958-53.978 MM)
Rods:
2.5574-2.5581" (64.958-64.978 MM)
Main:
Main:
1.3779" (35.000 MM)
Front Seal Diameter:
3.3464" (85.000 MM)
Rear Seal Diameter:
S4 TURBO THRUST BEARING LENGTH 1.940"
Comments:
APB
S4
00-02
Cyl Bore:
3.1890" (81.000 MM)
Thrust Width:
.8858" @ #4
28
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
Year
AUDI
6 Cylinders
2.8
AUDI
169
AAH
Stroke: 3.402" (86.411 MM)

2.1260" (54. MM)
Rods:
2.5590" (64.999 MM)
Main:
Main:
SOHC, 12 VALVE, MFI
Comments:
169
AHA
2.8
AUDI
170
QUATTRO
AFC
98-01
2.8
AUDI
170
90 SERIES
AFC*
95
3.248" (82.499 MM)
Cyl Bore:
CABRIOLET
96-98
3.248" (82.499 MM)

Stroke: 3.402" (86.411 MM)
Cyl Bore:
2.1260 *" (54. MM)
Rods:
2.5590 *" (64.999 MM)
Main:
Main:
Comments:
SOHC, SFI, MODELS A4, A6, CABRIOLET * .010,.020,.030 UNDERSIZE AVLBL
AUSTIN
AUSTIN
4 Cylinders
0.9
58
52-62
2.476" (62.89 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.6254-1.6259" (41.285-41.298 MM)
1/8 (.125)
Rods:
Rod Fillet:
#1 1.7505-1.7510" (44.463-44.475 MM)
Main:
@ CENTER
Main:
Thrust Width:
11C-74, 11G-74, 2A717A, 2A-717-A, 2A829, 2A-829, BE53B, BE-53-B
Casting Numbers:
Comments:
AUSTIN
948CC, SEE MG AS WELL 948CC, SEE MG AS WELL
0.9
58
SPRITE
Stroke: 2.992" (75.997 MM)

1.6254-1.6259" (41.285-41.298 MM)
Rods:
1.7505-1.7510" (44.463-44.475 MM)
Main:
Main:
11C74, 11G74, 2A717A, 2A829, BE53B
Casting Numbers:
Comments:
SPRITE, 948CC
56-65
Cyl Bore:
Rod Fillet:
2.476" (62.89 MM)

.125" (3.175 MM)
Thrust Width:
@ CENTER
Cyl Bore:
2.539" (64.500 MM)
Cyl Bore:
Rod Fillet:
2.559" (64.999 MM)

1/8
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
11F74CF, 11G74CF, BB38AX, BT793, PG38A
Casting Numbers:
Comments:
SEE MG AS WELL SEE MG AS WELL
2.579" (65.507 MM)

1/8
AUSTIN
Stroke:
Rods:
1.1
67
62-72
3.307" (84.000 MM)

1.6254-1.6259" (41.285-41.298 MM)
AUSTIN
1.1
67
Stroke: 3.307" (83.998 MM)

1.6254-1.6259" (41.285-41.298 MM)
Rods:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
125430
Casting Numbers:
Comments:
AUSTIN
AUSTIN
Stroke:
Rods:
1.2
1.2
3.189" (81.000 MM)

1.7504-1.7509" (44.46-44.473 MM)
73
64
54-59
78
64
Cyl Bore:
29
AAH
@ #4
3.2484" (82.510 MM)

Stroke: 3.400" (86.400 MM)
Cyl Bore:
2.1244-2.1251" (53.958-53.978 MM)
Rods:
2.5574-2.5581" (64.958-64.978 MM)
Main:
.8858" @ #4
Main:
Thrust Width:
1.3779" (35.000 MM)
3.3464" (85.000 MM)
Rear Seal Diameter:
078AB, 20R9T
Casting Numbers:
Comments:
DOHC, A6, 30 VALVE, 2000 + 2001 VIN ATQ THRUST BEARING LENGTH 1.940"
Stroke: 3.402" (86.411 MM)

2.1260" (54. MM) *
Rods:
2.5590" (64.999 MM) *
Main:
Main:
Comments:
SFI, MODEL 90 * .010,.020,.030 UNDERSIZE AVLBL
(cont.)
3.248" (82.499 MM)
Thrust Width:
2.8
AUDI
92-94
Cyl Bore:
Engine Model
2.776" (70.500 MM)
AHA

Make
Liter
CID
Vin
Model
AUSTIN
4 Cylinders
1.5
AUSTIN
91
Engine Model
(cont.)
54-61
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
11F74CF, 11G74CF, BB38AX, BT793X, PG38A
Casting Numbers:
Comments:
Year
2.874" (73. MM)

1/8
1.6
AUSTIN
99
61-72
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
11F74CF, 11G74CF, BB-38-AX, BT793, PG38A
Casting Numbers:
Comments:
1.8
AUSTIN
110
Stroke: 3.504" (89.002 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
#1 2.1262-2.1270" (54.005-54.026 MM)
Main:
Main:
12H764A, 22H1954A
Casting Numbers:
Comments:
SEE MG AS WELL 5 MAINS
1.8
AUSTIN
2.992" (75.997 MM)

1/8
64-80
Cyl Bore:
Rod Fillet:
3.157" (80.188 MM)

.125" (3.175 MM)
Cyl Bore:
3.157" (80.188 MM)
112
73-75
Stroke: 3.504" (89.002 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1265-2.1270" (54.013-54.026 MM)
Main:
Main:
22H1954A
Casting Numbers:
AUSTIN
6 Cylinders
2.6
AUSTIN
159
100-6
Stroke: 3.490" (88.646 MM)

2.0000-2.0005" (50.8-50.813 MM)
Rods:
1-4 2.3742-2.3747" (60.305-60.317 MM)
Main:
Internal
Main:
Balance:
INTAKE MANIFOLD CAST AS PART OF HEAD
Comments:
3.0
AUSTIN
56-59
3.125" (79.375 MM)
Cyl Bore:
183
3000
59-67
3.281" (83.337 MM)

Stroke: 3.490" (88.646 MM)
Cyl Bore:
2.0000-2.0005" (50.8-50.813 MM)
Rods:
1-4 2.3742-2.3747" (60.305-60.317 MM)
Main:
Main:
Balance: Internal
Comments:
3000 CAR, INTAKE CAST SEPARATE FROM HEAD INTAKE CAST SEPARATE FROM HEAD
BEDFORD
BEDFORD
4 Cylinders
3.6
220
220
4.0625" (103.188 MM)

Stroke: 4.2500" (107.95 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
.160-.170" (4.064-4.318 MM)
Rods:
Rod Fillet:
2.7490-2.7500" (69.825-69.85 MM)
.160-.170" (4.064-4.318 MM)
Main:
Main Fillet:
1.810-1.814@#4
Main:
Thrust Width:
DIESEL STD. THRUST WASHER THKNS .091-.093 AND AVAILABLE IN .003 & .006" OVERSIZE. RADIUS'S
Comments:
ARE ROLLED
BEDFORD
BEDFORD
6 Cylinders
5.4
330
330
Stroke: 4.250" (107.95 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.7490-2.7500" (69.825-69.85 MM)
Main:
Main:
DIESEL THRUST WASHER THKNS .091-.093
Comments:
4.0625" (103.188 MM)
Cyl Bore:
BMW
BMW
4 Cylinders
1.8
Stroke: 2.790" (70.866 MM)

1.8884-1.8898" (47.965-48.001 MM)
Rods:
#1 2.1650-2.1653" (54.991-54.999 MM)
Main:
Main:
1252126
Casting Numbers:
Comments:
108
M10B
318I
Cyl Bore:
VIN M10B18, MFI, 318I, 320I
30
84-85
3.500" (88.9 MM)

Make
Liter
CID
Vin
Model
BMW
4 Cylinders
1.8
BMW
108
M10B
Stroke: 2.795" (70.993 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.1642-2.1649" (54.971-54.988 MM)
Main:
Main:
1252126
Casting Numbers:
Comments:
BMW
1.8
110
1.8
110
M42
BMW
1.9
116
2.0
2.0
2.3
2002
M10
M3
88-91
3.6771" (93.398 MM)
Cyl Bore:
DOHC, M3, MFI MAIN DIAMETER COLORS ARE LOCATED ON THE CRANKSHAFT THROWS.
6 Cylinders
2.4
149
Stroke: 3.189" (81.001 MM)

1.7707-1.7713" (44.976-44.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
VIN M21D24, TURBO DIESEL, 524 MODEL
Comments:
BMW
77-79
3.504" (89.002 MM)
BMW
BMW
73-76
320I
S14
M44
3.504" (89.002 MM)
Cyl Bore:
140
92-98
3.3464-3.3470" (85.000-85.014 MM)
Cyl Bore:
121
93-95
Z3
M10
M42B18
3.3071-3.3076" (84.000-84.014 MM)
Cyl Bore:
121
91-95
318I
M44
3.3310" (84.607 MM)

1.8887-1.8894" (47.973-47.991 MM)
BLUE 2.1653" (54.999 MM)
RED 2.1653" (54.999 MM)
YELLW 2.1647-2.1649" (54.983-54.988 MM)
GREEN 2.1644-2.1648" (54.976-54.986 MM)
WHITE 2.1642-2.1644" (54.971-54.976 MM)
Comments:
@ CENTER
3.3071-3.3076" (84.000-84.014 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.1642-2.1649" (54.971-54.988 MM)
Main:
Main:
1252126
Casting Numbers:
Comments:
EFI, 320I
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
80-83
318I
Cyl Bore:
Stroke: 3.150" (80.01 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.1642-2.1649" (54.971-54.988 MM)
Main:
Main:
1252126
Casting Numbers:
Comments:
2BC, 2002
BMW
(cont.)
VIN M10B18, MFI, 320I
Stroke: 3.2874" (83.500 MM)

1.7720-1.7726" (45.009-45.025 MM)
Rods:
2.3611-2.3618" (59.971-59.990 MM)
Main:
Main:
Comments:
DOHC, Z3 ROADSTER (E36/7), M44
BMW
Engine Model
3.503" (88.976 MM)
Thrust Width:
Stroke: 3.189" (81.001 MM)

1.7720-1.7726" (45.009-45.024 MM) *
Rods:
2.3611-2.3618" (59.972-59.99 MM) *
Main:
Main:
Comments:
DOHC, SFI, 318I * .010,.020 UNDERSIZE AVLBL
BMW
320I
Cyl Bore:
Stroke: 3.1890" (81.001 MM)

1.7706-1.7713" (44.973-44.991 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
DOHC, 318 IC & IS SERIES
BMW
Year
2.5
M21D
524
Thrust Width:
152
85-86
3.150" (80.01 MM)
Cyl Bore:
@ #6
325I
Stroke: 2.953" (75.006 MM)

Cyl Bore:
1.7720-1.7727" (45.009-45.027 MM)
Rods:
2.3614-2.3618" (59.98-59.99 MM)
Main:
Main:
Thrust Width:
Comments:
SOHC, MFI, 325I, 325IC, 325IS, 525I,M20B25,M20B25M
31
87-90
3.3067-3.3075" (83.99-84.011 MM)
@ #6
M20

Make
Liter
CID
Vin
Model
Year
BMW
BMW
6 Cylinders
2.5
152
M50
Stroke: 2.953" (75.006 MM)

1.7720-1.7727" (45.009 TO 45.027 MM)
Rods:
2.3611-2.3618" (59.972 TO 59.99 MM)
Main:
Main:
DOHC, MFI, 325I, 325IC, 325IS, 525I
Comments:
BMW
2.7
2.8
2.8
M52
170
3.0
182
3.0
BMW
3.0
3.2
3.2
196
3.2
196
M3 (E36)
S52
BMW
3.4
328I
Thrust Width:
M69
97-02
3.4016-3.4021" (86.400-86.414 MM)
@ #6
528I
78-80
Cyl Bore:
3.386" (86.004 MM)
Cyl Bore:
3.504" (89.002 MM)
M30B
81-84
Thrust Width:
209
95-05
M30B
535I
Cyl Bore:
32
S50
3.3858-3.3864" (86.000-86.014 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
GAS, M30B32, MFI
Stroke: 3.386" (86.004 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
SOHC, 535I, 735I, M30B35MZ, MFI
77-78
3.504" (89.002 MM)
Cyl Bore:
Stroke: 3.504" (89.002 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
EFI, 528I
BMW
530I
182
Stroke: 3.527" (89.586 MM)

1.7707-1.7713" (44.975-44.991 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
M3, Z3,328I,328IS,528I,Z3 M SERIES,323I,323IS
BMW
75-78
3.504" (89.002 MM)
Cyl Bore:
195
79-81
3.386" (86.004 MM)
530I
M30
Stroke: 3.378" (85.800 MM)

1.7707-1.7713" (44.975-44.991 MM)
Rods:
2.3611-2.3618" (59.971-59.990 MM)
Main:
Main:
Comments:
DOHC. M3 (E36). 2990CC, S50
BMW
528I
Cyl Bore:
182
M52
@ #6
Thrust Width:
M30
Stroke: 3.150" (80.01 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
530I, 630CSI, EFI
97-00
3.307" (83.998 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
530I, 630CSI, EFI
BMW
@ #6
328I
Cyl Bore:
M30
Stroke: 3.150" (80.01 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
MFI, 528I
BMW
82-89
3.310" (84.074 MM)
Thrust Width:
170
M50
@ #6
325E
Cyl Bore:
Stroke: 3.307" (83.998 MM)

1.7707-1.7715" (44.976-44.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
SFI, M3, Z3,328I,328IS,528I,Z3 M SERIES,323I,323IS
BMW
91-95
Thrust Width:
164
(cont.)
3.3067-3.3075" (83.990-84.011 MM)
Cyl Bore:
Stroke: 3.190" (81.026 MM)

1.7707-1.7713" (44.976-44.991 MM)
Rods:
#1 2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
MFI, 325E, 528E, M20B77
BMW
325I
Engine Model
@ #4
87-93
3.6220-3.6224" (92.000-92.010 MM)
S52

Make
Liter
CID
Vin
Model
Year
BMW
6 Cylinders
3.4
BMW
209
M30B
Stroke: 2.913" (73.99 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
735I, M30B34, MFI
Comments:
3.5
BMW
211
S38Z
3.5
211
85-88
535I
87-88
3.622" (91.999 MM)
Cyl Bore:
@ #4
Thrust Width:
S38Z
Stroke: 3.386" (86.004 MM)

1.7713-1.7717" (44.991-45.001 MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Comments:
DOHC, MFI, 24 VALVE HEAD
89-91
3.6220-3.6224" (91.999-92.009 MM)
Cyl Bore:
@ #6
Thrust Width:
BMW
8 Cylinders
3.0
BMW
183
M60
Stroke: 2.661" (67.589 MM)

1.8888-1.8894" (47.976-47.991 MM) *
Rods:
2.7547-2.7555" (69.969-69.99 MM) *
Main:
Main:
PFI, 530I * .010,.020,.030 UNDERSIZE AVLBL
Comments:
4.4
BMW
268
530I
M62
94-95
3.307" (83.998 MM)
Cyl Bore:
Stroke: 3.250" (82.700 MM)

1.8888-1.8894" (47.975-47.991 MM)
Rods:
2.7547-2.7555" (69.971-69.990 MM)
Main:
Main:
Comments:
SFI, 540I, 840CI, 740I, 740IL
540I
97-99
3.6220" (92.000 MM)
Cyl Bore:
BMW
12 Cylinders
5.0
BMW
304
M70
Stroke: 2.95" (74.93 MM)

1.7707-1.7713" (44.976-44.991 MM)
Rods:
2.9516-2.9521" (74.971-74.983 MM)
Main:
Main:
MFI, 850I
Comments:
750
88-92
3.31" (84.074 MM)
Cyl Bore:
BUDA
1 Cylinder
0.6
BUDA
38
1BD38
Stroke: 4.125" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
B1937, B769
Casting Numbers:
Comments:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1BD38
3.438" (87.325 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.878
1BD38
BUDA
BUDA
4 Cylinders
2.5
153
Stroke: 4.125" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM) *
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM) *
Main:
Main:
4503200, 4512978, B2097W, B3200, B5960
Casting Numbers:
Comments:
BUDA
(cont.)
3.661" (92.989 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
DOHC, MFI, 16 VALVE HEAD, *ALSO 1991, 535I
BMW
735I
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.437" (87.3 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.882
DIESEL * MILITARY STANDARD CRANK: 2.4995-2.5000 MAINS & 2.1232-2.1240 RODS.
2.9
175
Stroke: 4.375" (111.125 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4503200, B2097W, B3200, B5960
Casting Numbers:
Comments:
4BD175
BD
4BD175
Cyl Bore:
33
3.563" (90.5 MM)
4BD175

Make
Liter
CID
Vin
Model
Year
BUDA
BUDA
4 Cylinders
2.9
175
3.0
182
3.0
BD
5.6
5.7
10.6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.750" (95.25 MM)

3/32
3/32
1.878
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.438" (112.725 MM)

.140" (3.556 MM)
.140" (3.556 MM)
2.690
344
HD-6
Stroke: 5.563" (141.3 MM)

2.7715-2.7725" (70.396-70.422 MM)
Rods:
3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
Comments:
HD-6
BUDA
4BD182
3.750" (95.25 MM)
344
Stroke: 5.563" (141.3 MM)

2.7715-2.7725" (70.396-70.422 MM)
Rods:
#1 3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
4348399, 4348425, 4348525
Casting Numbers:
BUDA
4BD182
Cyl Bore:
182
Stroke: 4.125" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4503200, 4512978, B2097W, B3200
Casting Numbers:
BUDA
3.563" (90.5 MM)
Cyl Bore:
Stroke: 4.125" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4BD182
BUDA
(cont.)
Stroke: 3.475" (88.265 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4503200, B2097W, B3200, B5960
Casting Numbers:
BUDA
Engine Model
HD-6
4.438" (112.725 MM)
Cyl Bore:
648
5.625" (142.875 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.2475-3.2485" (82.487-82.512 MM)
11/64
Rods:
Rod Fillet:
#1 3.7450-3.7460" (95.123-95.148 MM)
3/16
Main:
Main Fillet:
Main: Numbers:
8DC1125, 8DCS1125, DE34286, DE61324, DE63043, DE63908, DE64786, DE65968, DE65970, DE65971,
Casting
M60768
Comments:
GAS, MILITARY STD, LRG ROD LARGE ROD, MILITARY STANDARD ONLY, GAS ENGINE
BUDA
BUDA
6 Cylinders
3.8
230
3.438" (87.325 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9975-1.9985" (50.737-50.762 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.878
Main:
Thrust Width:
4502106, 4502107, 4505959, 4507700, 4514465, 4514467, B2106, B2107
Casting Numbers:
BUDA
4.3
262
Stroke: 4.375" (111.125 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4507700, B2106, B2107
Casting Numbers:
Comments:
DD262, 6DA262
BUDA
4.5
BUDA
4.6
DD262
DD262
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.563" (90.5 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.878
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.750" (95.25 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.878
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.625" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
2.128
273
Stroke: 4.125" (104.775 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4502106, 4502107, B2106, B2107
Casting Numbers:
Stroke: 4.500" (114.3 MM)

2.1225-2.1235" (53.912-53.937 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main:
1265, DE50861
Casting Numbers:
279
34

Make
Liter
CID
Vin
Model
BUDA
BUDA
6 Cylinders
4.8
5.2
5.3
6.0
6.4
7.0
7.7
3.625" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
2.130
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.813" (96.85 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.529
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.063" (103.2 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.509
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.188" (106.375 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.529
Cyl Bore:
Rod Fillet:
Main Fillet:
4.375" (111.125 MM)

.094" (2.388 MM)
.094" (2.388 MM)
430
Stroke: 4.750" (120.65 MM)

2.3725-2.3735" (60.262-60.287 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main: Numbers:
4101, 4340263, K40263
Casting
BUDA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
393
Stroke: 4.750" (120.65 MM)

2.3725-2.3735" (60.262-60.287 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main:
4101, 4340263, K40263
Casting Numbers:
BUDA
3.625" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
2.130
369
Stroke: 4.750" (120.65 MM)

2.3725-2.3735" (60.262-60.287 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main:
4101, 4340263, K40263
Casting Numbers:
BUDA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
325
Stroke: 4.750" (120.65 MM)

2.3725-2.3735" (60.262-60.287 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main:
4101, 4340263, DE51185, H11044, K40263
Casting Numbers:
BUDA
(cont.)
317
Stroke: 5.125" (130.175 MM)

2.1225-2.1235" (53.912-53.937 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main:
DE51186, DE51256
Casting Numbers:
BUDA
Engine Model
294
Stroke: 4.750" (120.65 MM)

2.1225-2.1235" (53.912-53.937 MM)
Rods:
#1 2.9960-2.9970" (76.098-76.124 MM)
Main:
Main:
DE51185, H11044
Casting Numbers:
BUDA
Year
470
4.250" (107.95 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.3725-2.3735" (60.262-60.287 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.9960-2.9970" (76.098-76.124 MM)
.094" (2.388 MM)
Main:
Main Fillet:
Main: Numbers:
4341302, DE40263, DE41302, DE41342, DE41382, DE41642, DE43102, DE4958
Casting
BUDA
8.5
516
Stroke: 5.563" (141.3 MM)

2.7115-3.7125" (68.872-94.298 MM)
Rods:
#1 3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
4347501
Casting Numbers:
Comments:
DIESEL, HD-11 SEE 10.2L AS WELL
BUDA
8.6
HD11
HD11
Cyl Bore:
4.438" (112.725 MM)
Thrust Width:
2.690
525
4.500" (114.3 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.3725-2.3735" (60.262-60.287 MM)
3/32
Rods:
Rod Fillet:
#1 2.9960-2.9970" (76.098-76.124 MM)
3/32
Main:
Main Fillet:
2.529
Main:
Thrust Width:
4341302, DE40263, DE41302, DE41342, DE41382, DE41642, DE43102, DE4958
Casting Numbers:
BUDA
10.2
Stroke: 5.563" (141.3 MM)

2.7715-2.7725" (70.396-70.422 MM)
Rods:
#1 3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
4347501
Casting Numbers:
Comments:
DIESEL, HD-11
624
HD11
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
35
HD11
4.875" (123.825 MM)
.140" (3.556 MM)
.140" (3.556 MM)
2.690

Make
Liter
CID
Vin
Model
BUDA
BUDA
6 Cylinders
12.8
BUDA
Engine Model
(cont.)
779
Stroke: 6.000" (152.4 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
#1 3.7450-3.7460" (95.123-95.148 MM)
Main:
Main: Numbers:
4371093
Casting
Comments:
Year
5.250" (133.35 MM)

.172" (4.369 MM)
.188
Cyl Bore:
Rod Fillet:
Main Fillet:
SMALL ROD SMALL ROD
13.8
844
5.250" (133.35 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.2475-3.2485" (82.487-82.512 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
#1 3.7450-3.7460" (95.123-95.148 MM)
.172" (4.369 MM)
Main:
Main Fillet:
3.382" (85.903 MM)
Main:
Thrust Width:
05844, 4361324, 4371087, 4371093, 4371097, DE34286, DE61324, DE63043, DE63908, DE64786,
Casting Numbers:
DE65968, DE66233
Comments:
SMALL ROD SMALL ROD
BUDA
15.9
971
5.625" (142.875 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.2475-3.2485" (82.487-82.512 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
#1 3.7450-3.7460" (95.123-95.148 MM)
.188
Main:
Main Fillet:
Main: Numbers:
05844, 4361324, 4371087, 4371097, DE61324, DE63908, DE65958, DE66233
Casting
Comments:
SMALL ROD SMALL ROD
BUDA
BUDA
8 Cylinders
18.4
1125
5.250" (133.35 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.3060-3.3070" (83.972-83.998 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
#1 3.8905-3.8915" (98.819-98.844 MM)
.172" (4.369 MM)
Main:
Main Fillet:
Main: Numbers:
8DC1125, 8DCS1125, DE34286, DE61324, DE63043, DE63908, DE64786, DE65970, DE65971, DE65986
Casting
Comments:
BUDA
LARGE JOURNALS LARGE JOURNALS
21.1
1,290
5.625" (142.875 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.3060-3.3070" (83.972-83.998 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
#1 3.8905-3.8915" (98.819-98.844 MM)
.172" (4.369 MM)
Main:
Main Fillet:
Main: Numbers:
8DC1125, 8DCS1125, DE34286, DE61324, DE63043, DE63908, DE64786, DE65968, DE65970, DE65971
Casting
Comments:
LARGE JOURNALS LARGE JOURNALS
CASE
CASE
3 Cylinders
0.9
52
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
DIESEL, MMC MODEL K3B, MODEL 235H
Comments:
CASE
1.0
1.1
CASE
1.3
Stroke: 3.543" (89.992 MM)

1.8895-1.8905" (47.993-48.019 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main:
Comments:
DIESEL, MMC MODEL K3H
Thrust Width:
@ #3
245
Thrust Width:
65
K3D
2.8740-2.8819" (73.-73.2 MM)
Cyl Bore:
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
Comments:
DIESEL, MMC MODEL K3E
K3B
3.6772-2.6780" (93.401-68.021 MM)
Cyl Bore:
60
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
Comments:
DIESEL, MMC MODEL K3D
CASE
235
@ #3
255
Thrust Width:
79
K3E
2.9921-3.0000" (75.999-76.2 MM)
Cyl Bore:
@ #3
265
Cyl Bore:
Thrust Width:
36
K3H
3.0709-3.0787" (78.001-78.199 MM)
@ #3

Make
Liter
CID
Vin
Model
Year
CASE
CASE
3 Cylinders
1.5
91
2.3
(cont.)
275
Stroke: 3.543" (89.992 MM)

1.8895-1.8905" (47.993-48.019 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main:
DIESEL, MMC MODEL K3M
Comments:
CASE
Engine Model
K3M
3.3071-3.3150" (84.-84.201 MM)
Cyl Bore:
@ #3
Thrust Width:
137
AD3/30
AD3/30
3.8125" (96.838 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
1.624-1.626 @#3
Main:
Thrust Width:
Comments:
DAVID BROWN, DIESEL, MODEL 770 (EARLY) O.S. THRUST WASHERS AVLBL
CASE
2.4
146
3800
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
Thrust Width:
Comments:
DAVID BROWN, GAS, MODEL 3800 O.S. THRUST WASHERS AVLBL
CASE
2.4
146
AD3/49
3.938" (100.025 MM)
1.624-1.626 @#3
770
AD3/49
3.9388" (100.046 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
1.624-1.626 @#3
Main:
Thrust Width:
Comments:
DAVID BROWN, DIESEL, MODEL 770 (LATE) O.S. THRUST WASHERS AVLBL
CASE
2.5
154
880
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
Rod Fillet:
#1 2.4990-2.4995" (63.475-63.487 MM)
Main:
Main Fillet:
Main:
Thrust Width:
05700AB, 8629, 990, A906675MF
Casting Numbers:
Comments:
880 DIESEL, DAVID BROWN T/W AVAILABLE IN STD, .005 & .020" O/S
CASE
2.5
154
3.8125-3.8135" (96.838-96.863 MM)

.150-.160" (3.81-4.064 MM)
.150-.160" (3.810-4.064 MM)
2.124-2.126
880
AD3/40
3.8125" (96.838 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
.150-.160" (3.81-4.064 MM)
Rods:
Rod Fillet:
2.4990-2.4995" (63.475-63.487 MM)
.150-.160" (3.810-4.064 MM)
Main:
Main Fillet:
1.624-1.626 @#3
Main:
Thrust Width:
05700AB, 8629, 990, A906675MF
Casting Numbers:
Comments:
DAVID BROWN, DIESEL, MODEL 880 (EARLY) O.S. THRUST WASHERS AVLBL
CASE
2.7
164
4600
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
Thrust Width:
Comments:
DAVID BROWN, GAS, MODEL 4600 O.S. THRUST WASHERS AVLBL
CASE
2.7
164
AD3/55
3.938" (100.025 MM)
1.624-1.626 @ #3
880
AD3/55
3.9388" (100.046 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
1.624-1.626 @#3
Main:
Thrust Width:
Comments:
DAVID BROWN, DIESEL, MODEL 880 (LATE) 52100-> O.S. THRUST WASHERS AVLBL
CASE
2.7
164
885
AD3/55
3.9388-3.9396" (100.046-100.066 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
.150-.160" (3.81-4.064 MM)
Rods:
Rod Fillet:
#1 2.4990-2.4995" (63.475-63.487 MM)
.150-.160" (3.810-4.064 MM)
Main:
Main Fillet:
1.624-1.626 @#3
Main:
Thrust Width:
05700AB, 8629, 990, A906675MF, G-11707, G-11709
Casting Numbers:
Comments:
885 DIESEL, DAVID BROWN 355011, CASE 1190 & 1194 T/W AVAILABLE IN STD, .005 & .020" O/S
CASE
CASE
Rods:
4 Cylinders
0.0
FC
95
1.7490-1.7500" (44.425-44.45 MM)
37

Make
Liter
CID
Vin
Model
Year
CASE
4 Cylinders
1.6
CASE
1.8
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2.0
124
3.160" (80.264 MM)
@ CENTER
VA & VAC
Stroke: 3.750" (95.25 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
V5200, V520D, VT3201, VT5200
Casting
Comments:
2.750" (69.85 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.5000
110
Stroke: 3.500" (88.9 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1262-2.1270" (54.005-54.026 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, 18V LEYLAND, CASE/IH DITCH WITCHES, OHV
CASE
(cont.)
95
Stroke: 4.000" (101.6 MM)

1.7490-1.7500" (44.425-44.45 MM)
Rods:
#1 2.1240-2.1250" (53.95-53.975 MM)
Main:
Main:
24504, BD-14A, BD-14K
Casting Numbers:
CASE
Engine Model
VA, VAC
3.250" (82.55 MM)

.094" (2.388 MM)
.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
GAS, MODEL VA, VAC
2.0
CASE
124
VA & VAE
VA, VA
3.250" (82.55 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.2490-2.2500" (57.125-57.15 MM)
.094" (2.388 MM)
Main:
Main Fillet:
Main: Numbers:
24504, BD-14A, BD-14K, V5200, V-5200, V520D, VT3201, VT-3201
Casting
Comments:
CASE
GAS, MODEL VA, VAE
2.1
126
Stroke: 4.125" (104.775 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
G10071, G11071, G11700
Casting Numbers:
Comments:
GAS, G126, 200B TRACTOR
CASE
2.1
CASE
2.4
148
CASE
2.4
148
CASE
2.4
3.125" (79.375 MM)

.094" (2.388 MM)
.094" (2.388 MM)
300
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
G(1)
4.125" (104.775 MM)

2.0605-2.0615" (52.337-52.362 MM)
2.6230-2.6240" (66.624-66.65 MM)

Main:
Main:
3.374-3.378" (85.7-85.801 MM)
Rear Seal Diameter:
967731, G10071, G11071, G11707, G11709
Casting Numbers:
Comments:
310 & 580 GAS TRACTOR
Stroke:
Rods:
Cyl Bore:
Rod Fillet:
Main Fillet:
4.125" (104.775 MM)

1.9365-1.9375" (49.187-49.213 MM)
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
3.374-3.378" (85.7-85.801 MM)
Rear Seal Diameter:
G10071, G11700, G11701, G11707, G11709
Casting Numbers:
Comments:
GAS, 300, 3OOB, 400B, 430, 47O TRACTORS
Stroke:
Rods:
G126
3.1223-3.1228" (79.306-79.319 MM)
.094" (2.388 MM)
.094" (2.388 MM)
126
Stroke: 4.125" (104.775 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
G-10071, G-11071, G-11700
Casting
Stroke:
Rods:
200B
Cyl Bore:
Rod Fillet:
Main Fillet:
310 & 580
#1 2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
3.374-3.378" (85.7-85.801 MM)
Rear Seal Diameter:
G10071, G-11071, G-11700, G-11707, G-11709
Casting Numbers:
61-66
Cyl Bore:
3.375" (85.725 MM)
Rod Width:
1.314-1.318" (33.376-33.477 MM)
Thrust Width:
1.504
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.375" (85.725 MM)

.094" (2.388 MM)
1.314-1.318" (33.376-33.477 MM)
.078
1.504
148
4.125" (104.775 MM)

1.9365-1.9375" (49.187-49.213 MM)
55-60
3.3750-3.3765" (85.725-85.763 MM)
.094" (2.388 MM)
1.314-1.318" (33.376-33.477 MM)
.078
1.504
55-60
38
G148

Make
Liter
CID
Vin
Model
Year
CASE
4 Cylinders
2.5
CASE
154
Stroke: 4.000" (101.6 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
05700AB
Casting Numbers:
Comments:
CASE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2.6
157
GD
2.6
159
2.6
2.7
3.3750-3.3770" (85.725-85.776 MM)
530
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5013-3.5028" (88.933-88.971 MM)

.078" (1.981 MM)
.078" (1.981 MM)
1.504
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.500" (88.9 MM)

.078" (1.981 MM)
.078" (1.981 MM)
1.5040
159
Stroke: 4.125" (104.775 MM)

2.0605-2.0615" (52.337-52.362 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
G-11707, G-11709
Casting Numbers:
CASE
41-54
3.500" (88.9 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.8750
300
Stroke: 4.125" (104.775 MM)

2.0605-2.0615" (52.337-52.362 MM)
Rods:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
G10071, G11071, G11700, G11707, G11709
Casting Numbers:
Comments:
GAS, 530, 570 & 580 CK BACKHOE
CASE
(cont.)
S, SE TRACTOR
Stroke: 4.375" (111.125 MM)

Cyl Bore:
2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
Comments:
DIESEL, CONTINENTAL CASE TRACTOR MODEL 300, 300B
CASE
Engine Model
164
350 TRACTOR
G164
3.5625" (90.488 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.0605-2.0615" (52.337-52.362 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
2.6230-2.6240" (66.624-66.65 MM)
.078" (1.981 MM)
Main:
Main Fillet:
1.5040
Main:
Thrust Width:
05700AB, 9667731, G10071, G11071, G11700, G11707, G11708, G11709
Casting Numbers:
Comments:
GAS, 350, 500B, 600B TRACTOR
CASE
2.7
165
Stroke: 4.000" (101.6 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
05700AB
Casting Numbers:
Comments:
S, SC TRACTORS
CASE
2.7
165
Stroke: 4.000" (101.6 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
05700AB
Casting Numbers:
Comments:
S, SC TRACTORS 154 CID FOR 3.5" BORE
CASE
2.8
171
Stroke: 4.000" (101.6 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
05700AB
Casting Numbers:
Comments:
SC TRACTOR
CASE
3.0
S
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
SC
SC
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
185
41-54
3.500 OR 3.625
.094" (2.388 MM)
.094" (2.388 MM)
1.8750
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
990
41-54
3.500" OR 3.625"
3/32
3/32
1.8750
41-54
3.6875" (93.663 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.8750
AD4/47
3.6250-3.6255" (92.075-92.088 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.2480-2.2485" (57.099-57.112 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
2.124-2.126 *
Main:
Thrust Width:
9016, D3891, D908453
Casting Numbers:
Comments:
DAVID BROWN, DIESEL, MODEL 990 (EARLY) * THRUST @ CENTER MAIN, O.S. THRUST WASHERS AVLBL
39

Make
Liter
CID
Vin
Model
CASE
CASE
Year
4 Cylinders
3.1
186
Engine Model
(cont.)
990
449001
3.938" (100.025 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
2.124-2.126 *
Main:
Thrust Width:
DAVID BROWN, DIESEL, MODEL 990 (LATE) * THRUST @ CENTER MAIN, O.S. THRUST WASHERS AVLBL
Comments:
CASE
3.1
186
990
Stroke: 4.000" (101.6 MM)

2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
Comments:
DIESEL, 990 DAVID BROWN
CASE
3.1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
188
61-75
186
3.9388-3.9396" (100.046-100.066 MM)

.150-.160" (3.81-4.064 MM)
.150-.160" (3.810-4.064 MM)
2.124-2.126
430
G188D
3.8110-3.8120" (96.799-96.825 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.0605-2.0615" (52.337-52.362 MM)
7/64
Rods:
Rod Fillet:
#1 2.8730-2.8740" (72.974-73. MM)
7/64
Main:
Main Fillet:
1.381 @ #3
Main:
Thrust Width:
4.0010-4.0020" (101.625-101.651 MM)
Rear Seal Diameter:
976321, A39151, G11740, G-11740, G-11741
Casting Numbers:
Comments:
G188D DIESEL, 430, 470, 530, 570, 580,630 TRACTORS 5 MAIN CRANK, SPLINED AND OPEN PILOT HOLE
CASE
3.1
188
Stroke: 4.125" (104.775 MM)

2.0605-2.0615" (52.337-52.362 MM)
Rods:
2.8730-2.8740" (72.974-73. MM)
Main:
4.0010-4.0020" (101.625-101.651 MM)
Main:
Rear Seal Diameter:
Comments:
G188, GAS, 530, 630 TRACTOR
CASE
3.4
207
Stroke: 4.125" (104.775 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.8730-2.8740" (72.974-73. MM)
Main:
4.0010-4.0020" (101.625-101.651 MM)
Main:Seal Diameter:
Rear
976321
Casting Numbers:
Comments:
450B, 580C DIESEL
CASE
Stroke:
Rods:
3.4
207
530
450B
DT
450B
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.8730-2.8740" (72.974-73. MM)

Main:
Main:
4.0010-4.0020" (101.625-101.651 MM)
Rear Seal Diameter:
976321
Casting Numbers:
Comments:
450B, 580C TURBO DIESEL THRUST WASHER THKNS .1025-.1045
CASE
3.6
219
D207
4.0000-4.0010" (101.6-101.625 MM)
.120-.135" (3.048-3.429 MM)
.120-.135" (3.048-3.429 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
4.125" (104.775 MM)

2.3730-2.3740" (60.274-60.3 MM)
G188
3.8130-3.8145" (96.85-96.888 MM)
Cyl Bore:
1200
DT207
4.0000-4.0010" (101.6-101.625 MM)
.120-.135" (3.048-3.429 MM)
1.4405-1.4445" (36.589-36.69 MM)
.120-.135" (3.048-3.429 MM)
1.374-1.377
AD4/55
3.9388-3.9396" (100.046-100.066 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
2.124-2.126 *
Main:
Thrust Width:
Comments:
DAVID BROWN, DIESL, MODEL 1200 PRIOR-SERIAL #4913 * THRUST @ CENTER MAIN, O.S. THRUST
WASHERS AVLBL
CASE
3.6
219
D(1)
1490
D219
3.9388-3.9396" (100.046-100.066 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.4980-2.4985" (63.449-63.462 MM)
.150-.160" (3.81-4.064 MM)
Rods:
Rod Fillet:
2.6240-2.6245" (66.65-66.662 MM)
.150-.160" (3.810-4.064 MM)
Main:
Main Fillet:
2.124-2.126
Main:
Thrust Width:
43322, D928, D928415, D928416
Casting Numbers:
Comments:
DIESEL, 1490, 1494 DAVID BROWN, LARGE MAINS & RODS LARGE MAINS
CASE
3.6
219
Stroke: 4.500" (114.3 MM)

2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
Comments:
TURBO DIESEL, SMALL MAINS SMALL MAINS
DT
219
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
40
DT219
3.9388-3.9396" (100.046-100.066 MM)
.150-.160" (3.81-4.064 MM)
.150-.160" (3.810-4.064 MM)
2.124-2.126

Make
Liter
CID
Vin
Model
CASE
CASE
4 Cylinders
3.6
219
Stroke: 4.500" (114.3 MM)

2.3730-2.3735" (60.274-60.287 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
D-179935, D-905196
Casting Numbers:
Comments:
CASE
239
4.1
4.1
4.1
251
BG
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
0-10700, 0-10700AB
Casting Numbers:
Comments:
770 GAS TRACTOR THRUST BRG THKNS .186-.188
CASE
4.3
4.4
251S
4.0000-4.0010" (101.6-101.625 MM)
.156" (3.962 MM)
.156" (3.962 MM)
4.7500
G251
4.0000-4.0010" (101.6-101.625 MM)
.156" (3.962 MM)
.156" (3.962 MM)
4.7500 @ CENTER
770
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
BG251
4.0000-4.0010" (101.6-101.625 MM)
.156" (3.962 MM)
.156" (3.962 MM)
4.7500 @ CENTER
O.S. THRUST WASHERS AVLBL
260
Stroke: 5.500" (139.7 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
0-1591, 0-1591AB
Casting Numbers:
Comments:
D SERIES GAS TRACTOR
CASE
B-SERIES
730
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
251
85-93
4.016" (102.006 MM)
.1567-.1583" (3.98-4.021 MM)
1.6732-1.6748
1.4754-1.4774 @ #4
400
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
0-10700, 0-10700AB
Casting Numbers:
Comments:
730 GAS
CASE
* THRUST
850
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
251
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
0-10700, 010700AB, 0-10700AB
Casting Numbers:
Comments:
GAS, 400, 700B & 800B SERIES TRACTORS
CASE
D219
3.9388-3.9396" (100.046-100.066 MM)
.150-.160" (3.81-4.064 MM)
.150-.160" (3.810-4.064 MM)
2.124-2.126 *
DAVID BROWN DIESEL 995,1210,1212,1410,1412,12-1390 SMALL MAINS

@ CENTER
3.9
(cont.)
995
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.724" (119.99 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
3903827, 3903830, 3907803
Casting Numbers:
Comments:
CUMMINS B-SERIES, 850, 860, 580 K, 4-390 MODELS
CASE
Engine Model
Year
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
267
3.875" (98.425 MM)

.094" (2.388 MM)
.094" (2.388 MM)
3.0040
700B
267BD
4.125" (104.775 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
5/32
Rods:
Rod Fillet:
2.9980-2.9990" (76.149-76.175 MM)
5/32
Main:
Main Fillet:
@ CENTER
Main:
Thrust Width:
4.750" (120.65 MM)
Rear Seal Diameter:
010700, 010700AB
Casting Numbers:
Comments:
267BD DIESEL, 700B,800B & 400,SERIAL #8104711 & UP THRUST BRG THKNS .186-.188, O.S.THRUST
WASHR AVLBLAVLBL
CASE
4.4
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
4.750" (120.65 MM)
Rear Seal Diameter:
010700, 010700AB
Casting Numbers:
Comments:
A267 DIESEL, 730 SERIES
267
730 SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
41
4.1250-4.1260" (104.775-104.8 MM)

.156" (3.962 MM)
.156" (3.962 MM)
@ CENTER
A267

Make
Liter
CID
Vin
Model
CASE
CASE
4 Cylinders
4.4
4.5
4.7
276
D
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
284
4.7
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
284
4.9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
301
4.250" (107.95 MM)

.156" (3.962 MM)
.156" (3.962 MM)
@ CENTER
830
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
4.7500" (120.65 MM)
Rear Seal Diameter:
0-10700, 0-107700
Casting Numbers:
Comments:
GAS, A284, 830 TRACTOR
CASE
4.000" (101.6 MM)

.094" (2.388 MM)
.094" (2.388 MM)
3.0040
830
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
4.7500" (120.65 MM)
Rear Seal Diameter:
0-10700, 0-107700
Casting Numbers:
Comments:
830 GAS TRACTOR
CASE
(cont.)
4.125" (104.775 MM)

.156" (3.962 MM)
.156" (3.962 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.500" (139.7 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
0-1591, 0-1591AB
Casting Numbers:
Comments:
D SERIES GAS TRACTOR
CASE
Engine Model
267
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
4.7500" (120.65 MM)
Main:Seal Diameter:
Rear
0-10700, 0-10700AB
Casting Numbers:
CASE
Year
830
A284
4.2500-4.2510" (107.95-107.975 MM)
.156" (3.962 MM)
.156" (3.962 MM)
@ CENTER
60-70
301BD
4.3750-4.3760" (111.125-111.15 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
2.9980-2.9990" (76.149-76.175 MM)
Main:
2.636 @ CENTER*
Main:
Thrust Width:
0-10700, 0-10700-AB, 966772, A22578
Casting Numbers:
Comments:
301BD & A301 DIESEL, 830 SERIES * THRUST WASHER WIDTH= .186 OR .156
CASE
4.9
301
BG
870
301BG
4.375" (111.125 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
2.9980-2.9990" (76.149-76.175 MM)
Main:
@ CENTER
Main:
Thrust Width:
010700, 010700AB
Casting Numbers:
Comments:
GAS, 301BG ENGINE, 870 TRACTOR THRST WASHR THKNS .186-.188,O.S. THRUST WSHR AVLBLO.S.
THKNS THRUST WASHERS AVLBL
CASE
5.5
336
336
336BD
4.6250" (117.475 MM)

Stroke: 5.0000" (127. MM)
Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
3/16"
Rods:
Rod Fillet:
2.9980-2.9990" (76.149-76.175 MM)
5/32"
Main:
Main Fillet:
@ CENTER
Main:
Thrust Width:
010700, 010700AB
Casting Numbers:
Comments:
336BD DIESEL, SMALL MAIN THRUST BRG THKNS .155-.157,O.S. THRUST WASHR AVLBLAVLBL
CASE
5.5
336
Stroke: 5.000" (127. MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
Comments:
336BDT TURBO DIESEL, LARGE MAIN
CASE
6.6
Stroke: 6.000" (152.4 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
01148AB
Casting Numbers:
Comments:
GAS, MODEL L, LA
BDT
336
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
404
LA
Cyl Bore:
42
336BDT
4.6250" (117.475 MM)
.172" (4.369 MM)
.172" (4.369 MM)
2.565
40-53
4.625" (117.475 MM)

Make
Liter
CID
Vin
Model
Year
CASE
CASE
Engine Model
6 Cylinders
5.4
329
D(2)
1594
D329
3.9388-3.9396" (100.046-100.066 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3728-2.3732" (60.269-60.279 MM)
.150-.160" (3.81-4.064 MM)
Rods:
Rod Fillet:
2.7490-2.7500" (69.825-69.85 MM)
.150-.160" (3.810-4.064 MM)
Main:
Main Fillet:
2.124-2.126 *
Main:
Thrust Width:
DIESEL, 1594 DAVID BROWN, NON SLEEVED BLOCK * FLANGE FILLET IS .250"
Comments:
CASE
5.4
329
1690
D329
3.9388-3.9396" (100.046-100.066 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3728-2.3732" (60.269-60.279 MM)
.150-.160" (3.81-4.064 MM)
Rods:
Rod Fillet:
2.7490-2.7500" (69.825-69.85 MM)
.150-.160" (3.810-4.064 MM)
Main:
Main Fillet:
2.124-2.126 *
Main:
Thrust Width:
Comments:
DIESEL, 1690 DAVID BROWN, NON SLEEVED BLOCK * FLANGE FILLET IS .250"
CASE
5.9
359
2096
Stroke: 4.724" (119.99 MM)

Cyl Bore:
2.7160-2.7170" (68.986-69.012 MM)
Rods:
Rod Fillet:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3907804
Casting Numbers:
Comments:
CUMMINS B-SERIES,2096 & 1896 TRACTOR, 855 D LOADER
CASE
Stroke:
Rods:
6.2
377
CASE
6.2
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
377
TURBO
5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
CASE
6.2
377
GAS
5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
0970DAB, 966441
Casting Numbers:
Comments:
600 & 900 GAS
CASE
Stroke:
Rods:
6.2
377
CASE
Stroke:
Rods:
6.2
5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
#1 2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
0970DAB, 966441, 968488
Casting Numbers:
Comments:
A377, 930 GAS TRACTOR
600 & 900

4.000" (101.6 MM)
Rod Width:
1.9975-2.0025" (50.737-50.864 MM)
Thrust Width:
2.624-2.626 @#5
900
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
0970DAB, 966441
Casting Numbers:
Comments:
600, 900 DIESEL TRACTOR
377
377D TURBO
4.000" (101.6 MM)

.156" (3.962 MM)
1.9975-2.0025" (50.737-50.864 MM)
.156" (3.962 MM)
2.624-2.626 @#5
Cyl Bore:
DIESL
5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
D377
4.000" (101.6 MM)
.156" (3.962 MM)
1.9975-2.0025" (50.737-50.864 MM)
.156" (3.962 MM)
2.624-2.626 @ #5
600 & 900
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
0970DAB, 966441
Casting Numbers:
Comments:
600, 900 TURBO DIESEL TRACTOR
Stroke:
Rods:
B-SERIES
500
5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
#1 2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
09700AB, 0970DAB, 966441
Casting Numbers:
Comments:
500 DIESEL TRACTOR
Stroke:
Rods:
85-93
4.0157-4.0173" (101.999-102.039 MM)

.1567-.1583" (3.98-4.021 MM)
.1673-.1675" (4.249-4.254 MM)
1.4754-1.4774 @ #6
377D
4.000" (101.6 MM)
.156" (3.962 MM)
1.9975-2.0025" (50.737-50.864 MM)
.156" (3.962 MM)
2.624-2.626 @#5
930
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
43
377G
A377
4.000" (101.6 MM)
5/32
1.9975-2.0025" (50.737-50.864 MM)
5/32
2.565 @ #5

Make
Liter
CID
Vin
Model
CASE
CASE
Stroke:
Rods:
6.2
377
BG
Comments:
GAS 377BG, 970 TRACTOR
CASE
6.6
401
401
401
7.4
451
7.4
970
8.3
504
401BD
4.125" (104.775 MM)
Thrust Width:
2.630 OR 2.565
DIESL
1030
A451
4.3750-4.3760" (111.125-111.15 MM)
.156" (3.962 MM)
.156" (3.962 MM)
2.628-2.630 @#5
1070
Stroke: 5.000" (127. MM)

Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
Rod Fillet:
2.9980-2.9990" (76.149-76.175 MM)
Main:
Main Fillet:
Main:
Thrust Width:
0970DAB, 966441
Casting Numbers:
Comments:
451BDT DIESEL,SERIES 1070,1090,1150,1170,1175,1270
CASE
2.630 OR 2.565 @ #5
Cyl Bore:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
451
A401
4.125" (104.775 MM)
THRUST @ #5
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
0970DAB, 966441
Casting Numbers:
Comments:
A451 DIESEL, SERIES 1030 & 1150B
CASE
A401
930
BD
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
Balance: Internal
0970DAB
Casting Numbers:
Comments:
970 DIESEL T/W THCKN .186-.188" & .006" O.S.
CASE
377BG
4.000" (101.6 MM)
.156" (3.962 MM)
1.9975-2.0025" (50.737-50.864 MM)
.156" (3.962 MM)
2.565 @ #5
4.125" (104.775 MM)

.156" (3.962 MM)
.156" (3.962 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.000" (127. MM)

Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
Thrust Width:
Balance: Internal
Comments:
A401, 930 DIESEL TRACTOR T/W THCKN .186-.188" & .006" O.S.
6.6
(cont.)
730
Stroke: 5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Internal
Main:
Balance:
0970DAB
Casting Numbers:
Comments:
730, DIESEL, A401, 931 TRACTOR
6.6
970
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
0970DAB, 968488
Casting Numbers:
CASE
Engine Model
6 Cylinders
5.000" (127. MM)

2.7480-2.7490" (69.799-69.825 MM)
CASE
Year
BDT
451BDT
4.375" (111.125 MM)
.156" (3.962 MM)
.156" (3.962 MM)
2.628-2.630 @#5
1370
504BDT
4.6250" (117.475 MM)

Stroke: 5.0000" (127. MM)
Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
#1 3.4980-3.4990" (88.849-88.875 MM)
.172" (4.369 MM)
Main:
Main Fillet:
2.565"
Main:
Thrust Width:
1.8115"
3.750"
Rear Seal Diameter:
969267, A138818, A65097, A66722, A66772, A77147
Casting Numbers:
Comments:
3.5" MAIN, TURBO DIESEL, 1370, 2390,2394,2590,2594 THERE ARE 2 DIFF CRANKS, 3.0 & 3.5" MAINS
CASE
8.3
504
2090
Stroke: 5.000" (127. MM)

Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
Thrust Width:
09700AB, 966441, 968488
Casting Numbers:
Comments:
504BD DIESEL, 2090, 2094 THERE ARE TWO DIFF CRANKS.
44
504BD
4.6250-4.6260" (117.475-117.5 MM)
SEE CAST #S
THRUST @ #5

Make
Liter
CID
Vin
Model
CASE
6 Cylinders
8.3
CASE
504
BDT(2
8.3
505
5.3150" (135.001 MM)

2.9916-2.9926" (75.987-76.012 MM)
3.8568-3.8588" (97.963-98.014 MM)

Main:
Main:
390562
Casting Numbers:
Comments:
6T830, C-SERIES CUMMINS
8.3
CASE
11.1
CASE
674
6T830 C-SERIE
Rod Width:
1.809-1.812" (45.949-46.025 MM)

@ #4
7110
Thrust Width:
6T-830, 6TA-83
4.488" (113.995 MM)
@ #4
2870
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
CATERPILLAR
CATERPILLAR
85-98
4.4882" (114. MM)
Cyl Bore:
3.9999-4.0008" (101.597-101.62 MM)

Main:
Main:
56163M
Casting Numbers:
Comments:
SCANIA ENGINE, 2870, 4890, 4894 TRACTORS
674D
5.000-5.001" (127.-127.025 MM)
.187" (4.75 MM)
2.329" (59.157 MM)
.187" (4.750 MM)
1.858-1.861
2 Cylinders
0.6
36
STARTING MOTO
Stroke: 3.000" (76.2 MM)

1.7495-1.7500" (44.437-44.45 MM)
Rods:
1.8120-1.8125" (46.025-46.038 MM)
Main:
Main: Numbers:
2A-3907, 4B-903, 7B-4524, 7M-683
Casting
D315
2.751-2.752" (69.875-69.901 MM)

.188" (4.775 MM)
3/16
Cyl Bore:
Rod Fillet:
Main Fillet:
STARTING MOTOR FOR 955 TRAXCAVATOR 955A DOZER
CATERPILLAR
0.9
54
Stroke: 3.500" (88.9 MM)

1.8745-1.8750" (47.612-47.625 MM)
Rods:
#1 1.9995-2.0000" (50.787-50.8 MM)
Main:
Main: Numbers:
4B-2311, 4B-2405, 5F-8405, 9F-8405
Casting
CATERPILLAR
1.4
83
CATERPILLAR
1.4
83
3.125" (79.375 MM)

.188" (4.775 MM)
.188" (4.775 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
1*
Stroke: 4.000" (101.6 MM)

1.9980-1.9990" (50.749-50.775 MM)
Rods:
2.1240-2.1250" (53.95-53.975 MM)
Main:
Main:
5B-8018, 5B-8454, 5B-8455, 5F-5455
Casting Numbers:
Comments:
STARTING MOTOR FOR EARLY 47, 48A1;64, 65A1
D7
Cyl Bore:
D7
3.628-3.629" (92.151-92.177 MM)
STARTING MOTO
Stroke: 4.000" (101.6 MM)

Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM)
Rods:
Rod Fillet:
#1 2.1240-2.1250" (53.95-53.975 MM)
Main:
Main Fillet:
Main: Numbers:
5B-8018, 5B-8455, 5B-8754, 5F-5455, 8F-8754, 9H1260
Casting
Comments:
2.565" @ #5
6T830
505
5.709" (145.009 MM)

3.3162-3.3171" (84.231-84.254 MM)
Comments:
504BDT
4.625" (117.475 MM)
Cyl Bore:
Thrust Width:
Stroke: 5.315" (135.001 MM)

2.9916-2.9926" (75.987-76.012 MM)
Rods:
3.8578-3.8588" (97.988-98.014 MM)
Main:
Main:
Comments:
6T-830 & 6TA-830 DIESEL, 7110, 7120, 7130, 7140
Stroke:
Rods:
(cont.)
3.0" MAIN, TURBO DIESEL, 2290, 2294 2 CRANKS:3.0 & 3.5" MAINS
CASE
Stroke:
Rods:
Engine Model
2290
Stroke: 5.000" (127. MM)

Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 2.9980-2.9990" (76.149-76.175 MM)
Main:
Main:
Thrust Width:
969052, 9690528, A138818, A65097, A66722, A66772, A77147
Casting Numbers:
Comments:
Year
GAS
45
3.6280-3.6290"
.188" (4.775 MM)
.188" (4.775 MM)

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
2.0
120
2.5
152
Stroke: 3.5433" (90. MM)

2.1651-2.1662" (54.994-55.021 MM)
Rods:
2.3620-2.3630" (59.995-60.02 MM)
Main:
Main:
Comments:
PEUGEOT DIESEL, LIFT MODEL 25
CATERPILLAR
VC60
2.5
2.7
3.4646-3.4663" (88.001-88.044 MM)
Thrust Width:
@ #5
VC40D
Thrust Width:
153
CATERPILLAR
3.0
XD3P
3.6
Thrust Width:
@ CENTER
1404
181
3.9
3034
CATERPILLAR
4.0
3034
3.820" (97.000 MM)
1.183-1.297" (30.050-32.950 MM)
1.299-1.301" @ #4
221
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
236
Stroke: 4.996" (126.898 MM)

2.4988-2.4996" (63.47-63.49 MM)
Rods:
2.9984-2.9992" (76.159-76.18 MM)
Main:
Main:
Comments:
GAS, PERKINS, ALSO MODEL T80, 100, 110
Stroke:
Rods:
G1600
3.9996-4.0008" (101.590-101.620 MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.7490-2.7500" (69.825-69.85 MM)
Main:
Main:
2B-4849, 5B-4825, 5F-1099, 7B-9079
Casting Numbers:
CATERPILLAR
XD3P
3.700" (93.98 MM)
Rod Width:
2.5571-2.5578" (64.951-64.970 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL PILOT BUSHING DEPTH 1.5748-1.5757" (40.000-40.023 MM)
CATERPILLAR
@ CENTER
Cyl Bore:
163
3.940" (100.000 MM)

2.0840-2.0850" (52.950-52.970 MM)
XD3P
3.701" (94.005 MM)
Stroke: 3.250" (82.55 MM)

Cyl Bore:
1.9979-1.9987 (50.747-50.767 MM)
Rods:
2.2477-2.2485" (57.092-57.112 MM)
Main:
Main:
Comments:
HERCULES G-1600, 2.7L, USED BY DAEWOO, SWEEPER
Stroke:
Rods:
XN1P
Cyl Bore:
Cyl Bore:
Stroke: 3.558 (90.373 MM)

2.1650-2.1662" (54.991-55.021 MM)
Rods:
2.3620-2.3630" (59.995-60.02 MM)
Main:
Main:
Comments:
2.5L DIESEL
CATERPILLAR
Engine Model
4 Cylinders
Stroke: 3.1889" (80.998 MM)

1.9679-1.9685" (49.985-50. MM)
Rods:
1 2.3386-2.3392" (59.4-59.416 MM)
Main 1:
2 2.3050-2.3060" (58.547-58.572 MM)
Main 2:
3 2.2509-2.2515" (57.173-57.188 MM)
Main 3:
4 2.2102-2.2112" (56.139-56.164 MM)
Main 4:
5 2.1616-2.1622" (54.905-54.92 MM)
Main 5:
OHV, VC60, GAS FORKLIFT, PEUGEOT ENGINE
Comments:
CATERPILLAR
Year
T60
T60
3.877-3.878" (98.476-98.501 MM)
Cyl Bore:
244
5.000" (127.000 MM)

2.4990-2.5000" (63.475-63.500 MM) *
3.750" (95.25 MM)

.188" (4.775 MM)
.218
2.4330
3054
3054
3.9385-3.9395" (100.038-100.063 MM)
Cyl Bore:
1.589-1.591" (40.361-40.411 MM)

Rod Width:
2.9980-2.9990" (76.149-76.175 MM)
Main:
1.738-1.741" @ CENTER
Main:
Thrust Width:
071Z724149
Casting Numbers:
Comments:
DIESEL, 7BJ TYPE 2 ENGINE, SMALLER VALVE STEM * .010, .020, .030" UNDERSIZE AVAILABLE. THRUST
WASHER THICKNESS.089-.091".
CATERPILLAR
Stroke:
Rods:
4.0
5.000" (127.000 MM)

2.4990-2.5000" (63.475-63.5 MM) *
244
3054
Cyl Bore:
97-02
1.589-1.591" (40.361-40.411 MM)

Rod Width:
2.9980-2.9990" (76.149-76.175 MM) *
Main:
1.738-1.741
Main:
Thrust Width:
071Z724149
Casting Numbers:
Comments:
DIESEL,416C BACKHOE,426B,NATURAL ASPIRATED, TYPE 1 * .010,.020,.030 UNDERSIZE AVLBL
THRUST @ CENTER, THRUST WASHER THKNS .089-.091
46
3054
3.9385-3.9395" (100.038-100.063 MM)

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Stroke:
Rods:
Year
Engine Model
4 Cylinders
4.0
244
TURBO
5.000" (127.000 MM)

2.4990-2.5000" (63.475-63.5 MM) *
3054
(cont.)
97-02
3054
3.9385-3.9395" (100.038-100.063 MM)
Cyl Bore:
1.589-1.591" (40.361-40.411 MM)

Rod Width:
2.9980-2.9990" (76.149-76.175 MM) *
Main:
1.738-1.741
Main:
Thrust Width:
416C, TURBO, DIESEL, BACKHOE, 426B, TYPE 1 ENGINE * .010,.020,.030 UNDERSIZE AVLBL
Comments:
THRUST @ CENTER, THRUST WASHER THICKNESS .089-.091
CATERPILLAR
4.1
251
922
63A
4.000" (101.6 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
Comments:
WHEEL LOADER, 63A, 16A-10, GROUP 40.1 * LATER MODELS .0036-.0065 CLR
CATERPILLAR
4.1
252
D2
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
ALL 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2M7566, 8H9354, 8M4800
Casting Numbers:
Comments:
63B, 51B, D2 TRACTOR * #8M4529,2M7566: #8M4800=.218-.234"
#8M4800=.218-.234"
CATERPILLAR
4.1
252
Stroke: 5.000" (127. MM)

2.5239-2.5251" (64.107-64.138 MM)
Rods:
ALL 2.7489-2.7501" (69.822-69.853 MM)
Main:
Main:
Balance: Internal
5F1099
Casting Numbers:
Comments:
42A
CATERPILLAR
4.1
CATERPILLAR
4.1
D311
252
4.3
**#8M4529,2M7566:
D320
252
D320
4.0000-4.0010" (101.6-101.625 MM)
.187-.203" (4.75-5.156 MM) *
1.688" (42.875 MM)
.156-.172 **
1.4975-1.5025" (38.036-38.164 MM)
**#8M4529,2M7566:
D320A
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
ALL 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2M7566, 8H4529, 8H9354, 8M4800
Casting Numbers:
Comments:
63B, 51B, D2 TRACTOR * #8M4529,2M7566: #8M4800=.218-.234"
#8M4800=.218-.234"
CATERPILLAR
D311H
4.000" (101.6 MM)
.187-.203" (4.75-5.156 MM) *
.156-.172 **
1.4975-1.5025" (38.036-38.164 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
ALL 2.9990-3.0000" (76.175-76.2 MM)

Main:
Main:
Balance: Internal
2M7566, 8H4529, 8H9354, 8M4800, 8M-4802
Casting Numbers:
Comments:
63B, 51B, D2 TRACTOR * #8M4529,2M7566: #8M4800=.218-.234"
#8M4800=.218-.234"
4.1
D311
4.000" (101.6 MM)
.187-.203" (4.75-5.156 MM)
.156-.172
2.4330-2.4370" (61.798-61.900 MM)
D311H
252
5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
CATERPILLAR
**#8M4529,2M7566:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
ALL 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2M7566, 8H4529, 8H9354, 8M4800
Casting Numbers:
Comments:
63B, 51B, D2 TRACTOR * #8M4529,2M7566: #8M4800=.218-.234"
#8M4800=.218-.234"
Stroke:
Rods:
D2
4.000" (101.6 MM)
.187-.203" (4.75-5.156 MM) *
.156-.172 **
1.4975-1.5025
259
**#8M4529,2M7566:
120B
Stroke: 5.1181" (130. MM)

Cyl Bore:
2.3600-2.3608" (59.944-59.964 MM)
Rods:
Rod Fillet:
3.5410-3.5420" (89.941-89.967 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL, & S4K-T TURBO, WATER COOLED,DIRECT INJ,OHV
47
D320A
4.000" (101.6 MM)
.187-.203" (4.75-5.156 MM) *
.156-.172 **
1.4975-1.5025
S4K & S4K-T

4.0157-4.0171" (101.999-102.034 MM)
.120" (3.048 MM)
.120" (3.048 MM)
1.2992-1.3007" @ #4

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
4.3
260
4.4
5.1
(cont.)
3064
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
269
3114
Stroke: 5.000" (127. MM)

2.7551-2.7567" (69.98-70.02 MM)
Rods:
#1 3.5425-3.5441" (89.98-90.02 MM)
Main:
Main:
4P5122, 7W9944
Casting Numbers:
Comments:
3114 TRUCK
CATERPILLAR
Engine Model
4 Cylinders
Stroke: 5.118" (129.997 MM)

2.3600-2.3608" (59.944-59.964 MM)
Rods:
3.5410-3.5420" (89.941-89.967 MM)
Main:
Main:
3064 DIESEL ENGINE
Comments:
CATERPILLAR
Year
3064
4.0157-4.0171" (101.999-102.034 MM)
.120" (3.048 MM)
.120" (3.048 MM)
1.2992-1.3007" @ #4
89-94
3114
Cyl Bore:
4.1338-4.1358" (104.999-105.049 MM)
Thrust Width:
1.494-1.498" (37.948-38.049)
312
955
D315
4.500" (114.3 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
.234-.250" (5.944-6.35 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.281-.297
Main:
Main Fillet:
2.745-2.750" (69.723-69.850 MM)
Main:
Thrust Width:
3F5026, 3F6777, 6H6888, 7B9654, 7H7008, 8F6777
Casting Numbers:
Comments:
955, 60A, 61H, D4, 39A, 40.78A, 22C, 20J BAL SHAFT DIA 1.9734-1.9744" CLEAR: .002-.005 INST END
PLAY: .0035-.0075
CATERPILLAR
5.1
312
955
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3F5026, 3F6777, 6H6888, 7B9654, 7H7008, 8F6777
Casting Numbers:
Comments:
4.250 MAIN H/B D4, 955 BAL SHAFT DIA 1.9734-1.9744" CLEAR: .002-.005
CATERPILLAR
5.1
D315 (2)
4.500" (114.3 MM)
.234-.250" (5.944-6.35 MM)
.281-.297
2.745-2.750" (69.723-69.850 MM)
INST END PLAY: .0035-.0075
312
4.250" (107.95 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
#1 3.4990-3.5000" (88.875-88.9 MM)
Main:
2.7470
Main:
Thrust Width:
2M-5170, 3F-5026, 3F-6777, 4M-9950, 5M-9960, 7B-9564, 7B-9654, 8F-6777
Casting Numbers:
CATERPILLAR
5.2
318
DI
3204
3204
5.000" (127. MM)

2.7489-2.7505" (69.822-69.863 MM)
4.500-4.502" (114.3-114.351 MM)

Cyl Bore:
.192-.208" (4.877-5.283 MM)
Rod Fillet:
1.660" (42.164 MM)
Rod Width:
3.4984-3.5000" (88.859-88.9 MM)
.092-.108
Main:
Main Fillet:
1.458-1.463 @ #3
Main:
Thrust Width:
1W0400, 4N0111, 4N1111, 6N8290, 7N5137, OR1206, OR1209, OR5024, OR5164, OR5474, OR5560
Casting Numbers:
Comments:
2TB1, 7EB1 DIRECT INJECTION
Stroke:
Rods:
CATERPILLAR
5.2
318
DI(2)
3204
3204
5.000" (127. MM)

2.7489-2.7505" (69.822-69.863 MM)
4.500" (114.3 MM)

Cyl Bore:
.192-.208" (4.877-5.283 MM)
Rod Fillet:
1.660" (42.164 MM)
Rod Width:
3.4984-3.5000" (88.859-88.9 MM)
.092-.108
Main:
Main Fillet:
1.4575-1.4625
Main:
Thrust Width:
Casting Numbers:
Comments:
45V1, 10X1, DIRECT INJ, TAPERED ROD
Stroke:
Rods:
CATERPILLAR
5.2
318
PC
3204
5.000" (127. MM)

2.7489-2.7505" (69.822-69.863 MM)
4.500" (114.3 MM)

Cyl Bore:
.192-.208" (4.877-5.283 MM)
Rod Fillet:
1.660" (42.164 MM)
Rod Width:
3.4984-3.5000" (88.859-88.9 MM)
.092-.108
Main:
Main Fillet:
1.4575-1.4625
Main:
Thrust Width:
Casting Numbers:
Comments:
45V1, INDIRECT INJECTION, STRAIGHT ROD, PRE- CUP
Stroke:
Rods:
48
3204

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
4 Cylinders
5.7
350
CB
Engine Model
(cont.)
D330
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2M5170, 2S5570, 4M9950, 4M9960, 8M4504, 8M4506, 9H2725
Casting Numbers:
Comments:
Year
D330
4.500" (114.3 MM)
.218-.234" (5.537-5.944 MM)
.218-.234
1.685-1.691" (42.799-42.926 MM)
CB BLK, PC HD, #'S 56, 57B1;81B1
CATERPILLAR
5.7
350
D4
D330
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2M5170, 2S5570, 4M9950, 4M9960, 8M4504, 8M4506, 9H2725
Casting Numbers:
Comments:
CB BLK, PC HD, #78A
CATERPILLAR
7.0
425
CB
D4
4.500" (114.3 MM)
.218-.234" (5.537-5.944 MM)
.218-.234
1.685-1.691" (42.799-42.926 MM)
3304
3304
4.7510-4.7520" (120.675-120.701 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234 (5.537-5.944 MM)
Main:
Main Fillet:
@ #5 *
Main:
Thrust Width:
2P1491, 2P6213, 2Y4504, 4N7694, 5C3834V, 5S5251, OR1212, OR1214, OR5021, OR5166, OR5167,
Casting Numbers:
OR5169, OR5170
Comments:
CB BLK, PC HD, #2, 4, 5B 48V1, 78P1 * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
CATERPILLAR
7.0
425
DI
3304
3304
6.000" (152.4 MM)

2.9987-3.0003" (76.167-76.208 MM)
4.7510-4.7520" (120.675-120.701 MM)

Cyl Bore:
.218-.234" (5.537-5.944 MM)
Rod Fillet:
1.8720-1.8830" (47.549-47.828 MM)
Rod Width:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
2P1491, 2P6213, 2Y4504, 4N7692, 4N7694, 5S5251, 9S771, OR1212, OR1214, OR5021, OR5166,
Casting Numbers:
OR5167, OR5169, OR5170
Comments:
SCROLL FUEL, SP BLK, DI HD, 7Z, 9Z, 12Z * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
Stroke:
Rods:
CATERPILLAR
7.0
425
NG
3304
3304
6.000" (152.400 MM)

2.9984-3.0000" (76.160-76.200 MM)
4.7500-4.7520" (120.650-120.710 MM)

Cyl Bore:
.218-.234" (5.540-5.940 MM)
Rod Fillet:
1.872-1.883" (47.549-47.829 MM)
Rod Width:
3.4984-3.5000" (88.860-88.900 MM)
.218-.234" (5.540-5.940 MM)
Main:
Main Fillet:
1.591-1.599" (40.411-40.615 MM) @ REAR *
Main:
Thrust Width:
Comments:
NATURAL GAS, ENGINE SERIAL #7Y291-UP * ENGINES WITH WIDE JOURNAL CRANKSHAFT HAVE
1.685-1.690" THRUST WIDTH.
Stroke:
Rods:
CATERPILLAR
7.0
425
SP
3304
3304
4.7510-4.7520" (120.675-120.701 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
2P1491, 2P6213, 2Y4504, 4N7694, 5S5251, OR1212, OR1214, OR5021, OR5166, OR5167, OR5169,
Casting Numbers:
OR5170
Comments:
SP BLK, DI HD, #2, 4, 5B; 48V1, 78P1 * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
CATERPILLAR
7.0
425
CB
D330C
D330C
4.7510-4.7520" (120.675-120.701 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
2P1491, 2P1686, 2P6213, 2Y4504, 3F5026, 3F6777, 4M9960, 4N7694, 5S5251, 5S5521, 7B9564,
Casting Numbers:
OR1212, OR1214, OR5021, OR5166, OR5167, OR5169, OR5170
Comments:
CB BLK, PC HD, #'S 2, 3, 5B1; 48V1, 78P1 * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
CATERPILLAR
7.0
425
SP
D330C
4.751" (120.675 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
2P1491, 2P1686, 2P6213, 2Y4504, 3F5026, 3F6777, 4M9960, 4N7694, 5S5251, 5S5521, 7B9564,
Casting Numbers:
OR1212, OR1214, OR5021, OR5166, OR5167, OR5169, OR5170
Comments:
SP BLK, DI HD * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
49
D330C

Make
Liter
CID
Vin
Model
Year
CATERPILLAR
CATERPILLAR
4 Cylinders
9.8
595
9.8
597
11.4
CATERPILLAR
13.6
13.6
5.400" (137.16 MM)
Thrust Width:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
5.250" (133.35 MM)

.296" (7.518 MM)
.188
4.8750
831
6600
8.000" (203.2 MM)

3.6240-3.6250" (92.05-92.075 MM)
4.2600-4.2610" (108.204-108.229 MM)
CATERPILLAR
340
Cyl Bore:
693
Stroke: 8.000" (203.2 MM)

3.6235-3.6255" (92.037-92.088 MM)
Rods:
#1 3.7485-3.7505" (95.212-95.263 MM)
Main:
Main:
2H-862
Casting Numbers:
Comments:
SMALL MAINS SMALL MAINS
Stroke:
Rods:
Main:
Main:
824
5.400" (137.16 MM)
340
Stroke: 6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
Rods:
4.4995-4.5005" (114.287-114.313 MM)
Main:
Main:
1S2512, 2P3841
Casting Numbers:
Comments:
DIESEL * SEE CASTINGS TAB - DIFFERENT WIDTHS
CATERPILLAR
(cont.)
824
Stroke: 6.500" (165.1 MM)

Cyl Bore:
3.5395-3.5405" (89.903-89.929 MM)
Rods:
4.4995-4.5005" (114.287-114.313 MM)
Main:
Main:
29G, WHEEL TRACTORS & COMPACTORS,13A-10,GROUP 40.1
Comments:
CATERPILLAR
Engine Model
831
6600
5.750" (146.05 MM)
Cyl Bore:
7700
7700
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.188" (4.775 MM)
Rods:
Rod Fillet:
4.2600-4.2610" (108.204-108.229 MM)
Main:
4.8750
Main:
Thrust Width:
2H-862, 4F-8510, 4F-9623, 4M-9352, 6F-1914, 7B-7452, 7B-9578, 7F-8511
Casting Numbers:
CATERPILLAR
13.6
831
8800
Stroke: 8.000" (203.2 MM)

3.6240-3.6250" (92.05-92.075 MM)
Rods:
4.2600-4.2610" (108.204-108.229 MM)
Main:
Main:
Comments:
13.6L
CATERPILLAR
Stroke:
Rods:
Main:
Main:
13.6
831
8841
8.000" (203.2 MM)

3.6240-3.6250" (92.05-92.075 MM)
4.2600-4.2610" (108.204-108.229 MM)
CATERPILLAR
13.6
D339
Stroke: 8.000" (203.2 MM)

Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2H0862, 4F9352, 4H5450, 7B7452, 7B9578, 7F9511, 9H9082
Casting Numbers:
Comments:
EARLY 47, 48A1;64, 65A1 ROD BEARINGS MAY BE 2" OR 2.5" LENGTH
CATERPILLAR
13.6
831
13.6
831
D339
4.750" (120.65 MM)
.187-.203" (4.75-5.156 MM)
.187-.203
4.870-4.875
D339
Stroke: 8.000" (203.2 MM)

Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main Fillet:
Main:
Thrust Width:
1S5420, 4F9352, 4S7414, 4S9284, 7B9578, 7F9511
Casting Numbers:
Comments:
LATE 47, 48A1 64, 65A1 ROD BEARINGS MAY BE 2" OR 2.5" LENGTH
CATERPILLAR
8841
5.750" (146.05 MM)
Cyl Bore:
831
8800
5.750" (146.05 MM)
Cyl Bore:
D339
4.750" (120.65 MM)
.187-.203" (4.75-5.156 MM)
.187-.203
4.870-4.875" (123.698-123.825 MM)
D339
4.750" (120.65 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.187-.203" (4.75-5.156 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
.187-.203
Main:
Main Fillet:
3.870-3.875
Main:
Thrust Width:
2H0862, 4F8510, 4F9352, 4H5450, 6F1914, 7B7452, 7B9578, 7F9511, 9H9082
Casting Numbers:
Comments:
4.114 H/B BLK, D-7 TRACTOR ROD BEARINGS MAY BE 2" OR 2.5" LENGTH
50
D339

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
Engine Model
4 Cylinders
13.6
831
(cont.)
D339
D339
4.750" (120.65 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.187-.203" (4.75-5.156 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
.187-.203
Main:
Main Fillet:
3.870-3.875
Main:
Thrust Width:
1S5420, 4F9352, 4H5450, 4S7414, 4S9284, 7B9578, 7F9511, 9H9082
Casting Numbers:
Comments:
3.875 THRUST WIDTH ROD BEARINGS MAY BE 2" OR 2.5" LENGTH
CATERPILLAR
13.6
831
D339
Stroke: 8.000" (203.2 MM)

Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4F9352, 4S9284, 7B9578, 7F9511
Casting Numbers:
Comments:
4.875 THRUST WIDTH ROD BEARINGS MAY BE 2" OR 2.5" LENGTH
CATERPILLAR
13.6
831
D7
Stroke: 8.000" (203.2 MM)

Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2H862, 4F9352, 4H5450, 7B7452, 7B9578, 7F9511, 9H9082
Casting Numbers:
Comments:
EARLY 47, 48A1;64, 65A1 ROD BRGS MAY BE 2" OR 2.5" LENGTH
CATERPILLAR
13.6
831
CATERPILLAR
5.0
304
5.0
3046
3.7008-3.7022" (94.000-94.036 MM)
Thrust Width:
1.220-1.222" THRUST @ REAR
305
5.4
DP40
330
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
Comments:
63A, 17A-10, GROUP 40
CATERPILLAR
6.4
CATERPILLAR
6.4
S6S
3.7008-3.7022" (94.000-94.035 MM)
.112-.128" (2.800-3.200 MM)
.112-.128" (2.800-3.200 MM)
922
389
922
4.000" (101.6 MM)
Cyl Bore:
S6K
Stroke: 5.1181" (130. MM)

Cyl Bore:
2.3600-2.3608" (59.944-59.964. MM)
Rods:
Rod Fillet:
3.5410-3.5420" (89.941-89.967. MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, & S6K-T TURBO, WATER COOLED,DIRECT INJ,OHV
Stroke: 5.118" (129.997 MM)

2.3600-2.3608" (59.944-59.964 MM)
Rods:
3.5410-3.5420" (89.941-89.967 MM)
Main:
Main:
Comments:
3066 DIESEL
3046
Cyl Bore:
Stroke: 4.7244" (120.000 MM)

Cyl Bore:
2.2817-2.2823" (57.955-57.970 MM)
Rods:
Rod Fillet:
3.0691-3.0697" (77.955-77.970 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, DP50, DP60, DP70, MITSUBISHI S6S ENGINE
CATERPILLAR
D7
4.7500-4.7510" (120.65-120.675 MM)
.187-.203" (4.75-5.156 MM)
.187-.203" (4.750-5.156 MM)
4.870-4.875
6 Cylinders
Stroke: 4.720" (119.888 MM)

2.2817-2.2823" (57.955-57.97 MM) *
Rods:
3.0691-3.0697" (77.955-77.97 MM)
Main:
Main:
DIESEL * .010,.020,.030 UNDERSIZE AVLBL
Comments:
CATERPILLAR
D7
4.750" (120.65 MM)
.187-.203" (4.75-5.156 MM)
.187-.203" (4.750-5.156 MM)
4.870-4.875
D7
Stroke: 8.000" (203.2 MM)

Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main Fillet:
Main:
Thrust Width:
1S5420, 4F9352, 4S7414, 4S9284, 7B9578, 7F9511
Casting Numbers:
Comments:
LATE 47, 48A1 64, 65A1 ROD BRGS MAY BE 2" OR 2.5" LENGTH
CATERPILLAR
D339
4.750" (120.65 MM)
.187-.203" (4.75-5.156 MM)
.187-.203
4.870-4.875
390
S6K, S6K-T
4.0157-4.0171" (101.999-102.034 MM)
.120" (3.048 MM)
.120" (3.048 MM)
3066
7JK1
Cyl Bore:
4.0161-4.0175" (102.010-102.045 MM)
Thrust Width:
1.2992-1.3007@4
51

Make
Liter
CID
Vin
Model
Year
CATERPILLAR
CATERPILLAR
6 Cylinders
6.6
403
3116
Stroke: 5.0000" (127. MM)

2.7551-2.7567" (69.98-70.02 MM)
Rods:
#1 3.5425-3.5441" (89.98-90.02 MM)
Main:
Main:
1013228, 4P5121, 7W5206
Casting Numbers:
Comments:
Engine Model
(cont.)
89-95
3116
Cyl Bore:
4.1338-4.1358" (104.999-105.049 MM)
Thrust Width:
1.494-1.498" (37.948-38.049)
DIESEL, GM TRUCK & IND
CATERPILLAR
7.2
439
3126
Stroke: 5.0000" (127. MM)

Cyl Bore:
2.7551-2.7567" (69.98-70.02 MM)
Rods:
#1 3.5425-3.5441" (89.98-90.02 MM)
Main:
Main:
Thrust Width:
1013228, 4P5121, 7W5206
Casting Numbers:
Comments:
1WM MARINE, 953 TRUCK LOADER SAME FAMILY AS 3116
CATERPILLAR
7.2
439
8.6
525
3126
1.494-1.498" (37.948-38.049)
3126B
Stroke: 5.0000" (127.000 MM)

2.7551-2.7567 (69.980-70.020 MM)
Rods:
3.5425-3.5441" (89.980-90.020 MM)
Main:
Main:
4P5121, 7W5206
Casting Numbers:
Comments:
DIESEL, 3 VALVES PER CYL, SERIAL #8YL3126B
CATERPILLAR
95-02
4.3307-4.3327" (110.050-110.000 MM)
3126B
Cyl Bore:
4.3307-4.3327" (110.000-111.050 MM)
Thrust Width:
1.494-1.498" (37.948-38.049 MM)
CB
1673
1673
4.5000-4.5010" (114.3-114.325 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234" (5.537-5.944 MM)
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 1S9400, 2P2842, 4N7696, 5C3836, 5S5870, 8M4500, 8M4502, 9H9854, 9M2336, 9S2270,
Casting Numbers:
OR5018
Comments:
CB BLK, PC HD;1L1;70, 74B1;78, 83B1 * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
CATERPILLAR
8.6
525
D318
D318
4.500" (114.3 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
.234-.250" (5.944-6.35 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.281-.297
Main:
Main Fillet:
2.745-2.750" (69.723-69.850 MM)
Main:
Thrust Width:
3.500" (88.9 MM)
Rear Seal Diameter:
3F5020, 5F5020, 6H4385, 7H1964
Casting Numbers:
Comments:
3.895" MAIN HOUSING BORE BAL SHAFT DIA 1.9734-1.9744" CLEAR: .002-.005 INST END PLAY:
.0035-.0075
CATERPILLAR
8.6
525
D318(2)
D318
4.500" (114.3 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
.234-.250" (5.944-6.35 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.281-.297
Main:
Main Fillet:
2.745-2.750" (69.723-69.850 MM)
Main:
Thrust Width:
3F5020, 3F-5020, 5F5020, 5F-5020, 6H4385, 7H1964
Casting Numbers:
Comments:
4.250 MAIN H/B BAL SHAFT DIA 1.9734-1.9744" CLEAR: .002-.005 INST END PLAY: .0035-.0075
CATERPILLAR
8.6
525
CB
D333
D333
4.751" (120.675 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 1S9400, 2P2842, 4N7696, 5C3836, 5S5870, 8M4500, 8M4502, 9H9854, 9M2336, 9S2270,
Casting Numbers:
OR5018
Comments:
CB BLK, PC HD, # 68.59B1; 79, 80B1; 87, 88B1 * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
CATERPILLAR
10.3
629
Stroke: 5.500" (139.7 MM)

3.2275-3.2291" (81.979-82.019 MM)
Rods:
3.9362-3.9378" (99.979-100.020 MM)
Main:
Main:
Balance: Internal
0R2823, 0R4555, 0R4556, 9Y5706
Casting Numbers:
Comments:
DI, 4 DIFF H/P RATINGS
3176
89-96
3176
Cyl Bore:
4.9212-4.9232" (124.998-125.049 MM)
Thrust Width:
1.728-1.736" @ #4
52

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Engine Model
6 Cylinders
10.3
629
3176C
Stroke: 5.5118" (140.000 MM)

3.2275-3.2291" (81.980-82.020 MM)
Rods:
4.2512-4.2528" (107.980-108.020 MM)
Main:
Main:
3.7760" (95.910 MM)
1161080
Casting Numbers:
Comments:
Year
(cont.)
97-02
Cyl Bore:
4.9212" (125.000 MM)
Thrust Width:
@ #4
3176C
DIESEL, DIR INJ
CATERPILLAR
10.3
629
C10
Stroke: 5.5118" (140.00 MM)

3.2275-3.2291" (81.980-82.020 MM)
Rods:
4.2512-4.2528" " (107.980-108.020 MM)
Main:
Main:
3.776" ( 95.910 MM)
1161080
Casting Numbers:
Comments:
DIESEL, DIR INJ, 2PN1 & UP
CATERPILLAR
10.5
638
96-02
Cyl Bore:
4.9212" (125.00 MM)
Thrust Width:
@ #4
CB
1673C
C10
1673
4.7510-4.7520" (120.675-120.701 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234" (5.537-5.944 MM)
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2842, 2Y4506, 4N7696, 5C3836, 5H7375, 5S5870, 9S2270, OR1215, OR1217, OR5018,
Casting Numbers:
OR5172, OR5173, OR5175, OR5176
Comments:
CB BLK, PC HD, # 22C, 23C, 66D, 67D, 69D, 76R * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
CATERPILLAR
10.5
638
SP
1673C
1673
4.750" (120.65 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234" (5.537-5.944 MM)
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2842, 2Y4506, 4N7696, 5C3836, 5S5870, 9S2270, OR1215, OR1217, OR5018, OR5172,
Casting Numbers:
OR5173, OR5175, OR5176
Comments:
SP BLK, DI HD * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
CATERPILLAR
10.5
638
1674
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3S9629, 9S0123, OR5047
Casting Numbers:
Comments:
5S6130 S/P;92.93.94B MULTIPLE REAR SEAL APPLICATIONS
CATERPILLAR
10.5
638
1674
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3S9629, 9S0123, OR5047
Casting Numbers:
Comments:
7S9897 S/P;92, 93, 94B MULTIPLE REAR SEAL APPLICATIONS
CATERPILLAR
10.5
638
CATERPILLAR
10.5
6.000" (152.4 MM)

2.9987-3.0003" (76.167-76.208 MM)
638
1674
4.750" (120.65 MM)
.218-.234" (5.537-5.944 MM)
.218-.234" (5.537-5.944 MM)
1.685-1.690
1674
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3S9629, 9S0123, OR5047
Casting Numbers:
Comments:
2P1463 S/P;92, 93, 94B MULTIPLE REAR SEAL APPLICATIONS
Stroke:
Rods:
1674
4.750" (120.65 MM)
.218-.234" (5.537-5.944 MM)
.218-.234" (5.537-5.944 MM)
1.685-1.690" (42.799-42.926 MM)
CB
1674
4.750" (120.65 MM)
.218-.234" (5.537-5.944 MM)
.218-.234" (5.537-5.944 MM)
1.685-1.690
3306
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3306
4.7510-4.7520" (120.675-120.701 MM)
.218-.234" (5.537-5.944 MM)
1.8720-1.8830" (47.549-47.828 MM)
.218-.234
*SEE BELOW, @#4
ALL 3.4990-3.5000" (88.875-88.9 MM)

Main:
Main:
6.000" (152.4 MM)
Rear Seal Diameter:
1P1390, 2P2824, 2P2842, 2Y4506, 4N7693, 4N7696, 5C3836, 5S5870, 8M4502, 9S2270, OR1215,
Casting Numbers:
OR1217, OR5018, OR5172, OR5173, OR5175, OR5176
Comments:
CB BLK, PC HD, # 22C, 23C, 66D, 67D, 69D, 76R, 89P * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
53

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
6 Cylinders
10.5
638
DI
Engine Model
(cont.)
3306
3306
4.751-4.752" (120.675-120.701 MM)

Cyl Bore:
.218-.234" (5.537-5.944 MM)
Rod Fillet:
1.8720-1.8830" (47.549-47.828 MM)
Rod Width:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2824, 2P2842, 2Y4506, 4N7693, 4N7696, 5C3836, 5S5870, 8M4502, 9S2270, OR1215,
Casting Numbers:
OR1217, OR5018, OR5172, OR5173, OR5175, OR5176
SCROLL FUEL, SP BLK, DI HD, 7Z, 9Z, 12Z * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
Comments:
Stroke:
Rods:
6.000" (152.4 MM)

2.9987-3.0003" (76.167-76.208 MM)
CATERPILLAR
10.5
638
NG
3306
3306
6.0000" (152.400 MM)

2.9984-3.0000" (76.160-76.200 MM)
4.7500-4.7520" (120.650-120.710 MM)

Cyl Bore:
.218-.234" (5.540-5.940 MM)
Rod Fillet:
1.872-1.883" (47.549-47.829 MM)
Rod Width:
3.4984-3.5000" (88.860-88.900 MM)
.218-.234" (5.540-5.940 MM)
Main:
Main Fillet:
1.591-1.599" (40.411-40.615 MM) @ REAR *
Main:
Thrust Width:
Comments:
NATURAL GAS ENGINE, SERIAL #37Y1-UP * ENGINES WITH WIDE JOURNAL CRANKSHAFT HAVE
1.685-1.690" THRUST WIDTH.
Stroke:
Rods:
CATERPILLAR
10.5
638
SP
3306
3306
4.751-4.752" (120.675-120.701 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2824, 2P2842, 2Y4506, 4N7693, 4N7696, 5C3836, 5S5870, 8M4502, 9S2270, OR1215,
Casting Numbers:
OR1217, OR5018, OR5172, OR5173, OR5175, OR5176
Comments:
SP BLK, DI HD * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
CATERPILLAR
10.5
638
SP
3306
3306B
4.751-4.752" (120.675-120.701 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2824, 2P2842, 4N7693, 4N7696, 5C3836, 5S5870, 8M4502, 9S2270, OR5018
Casting Numbers:
Comments:
3306 B SP BLK, DI HD * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
CATERPILLAR
10.5
638
SP
3306
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2P2824, 4N7693, 4N7696, 5C3836, 5S5870, 9S2270
Casting Numbers:
Comments:
3306 C, SP BLOCK, DI HD * 1.591-1.599 OR 1.685-1.690 SEE CAST # SEC
CATERPILLAR
10.5
638
Stroke: 5.500" (139.7 MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Comments:
68B1 -> NATURAL GAS ENGINE
CATERPILLAR
10.5
333
638
10.5
638
333
4.500" (114.3 MM)
Cyl Bore:
334
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Thrust Width:
2P2842, 4N7696, 5C3836, 5S5870, 9S2270, OR5018
Casting Numbers:
Comments:
D334 DIESEL
CATERPILLAR
3306C
4.751-4.752" (120.675-120.701 MM)
.218-.234" (5.537-5.944 MM)
.218-.234
*
CB
334
4.750" (120.65 MM)
.250" (6.35 MM)
1.685-1.690
D333C
4.751" (120.675 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2842, 2Y4506, 4N7696, 5C3836, 5S5870, 8M4502, 9S2270, OR1215, OR1217, OR5018,
Casting Numbers:
OR5172, OR5173, OR5175, OR5176
Comments:
CB BLK, PC HD, 22, 23C1, 66, 67.68, 70R1, 88B1 * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
54
D333C

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
Engine Model
6 Cylinders
10.5
638
SP
(cont.)
D333C
D333C
4.751" (120.675 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9987-3.0003" (76.167-76.208 MM)
.218-.234" (5.537-5.944 MM)
Rods:
Rod Fillet:
ALL 3.4990-3.5000" (88.875-88.9 MM)
.218-.234
Main:
Main Fillet:
*
Main:
Thrust Width:
1P1390, 2P2842, 2Y4506, 4N7696, 5C3836, 5S5870, 8M4502, 9S2270, OR1215, OR1217, OR5018,
Casting Numbers:
OR5172, OR5173, OR5175, OR5176
SP BLK, DI HD, #22C, 23C, 66D, 67D, 69D, 76R * 1.591-1.599 OR 1.685-1.690 SEE CAST NUMBR SEC
Comments:
CATERPILLAR
10.5
638
D334
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3S9629, 9S0123, OR5047
Casting Numbers:
Comments:
5S6130 S/P; 92, 93, 94B MULTIPLE REAR SEAL APPLICATIONS
CATERPILLAR
10.5
638
D334
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3S9629, 9S0123, OR5047
Casting Numbers:
Comments:
7S9897 S/P; 92, 93, 94B MULTIPLE REAR SEAL APPLICATIONS
CATERPILLAR
10.5
638
CATERPILLAR
12.0
CATERPILLAR
12.2
D334
4.750" (120.65 MM)
.218-.234" (5.537-5.944 MM)
.218-.234
1.685-1.690
D334
Stroke: 6.000" (152.4 MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3S9629, 9S0123, OR5047
Casting Numbers:
Comments:
2P1463 S/P; 92, 93, 94B MULTIPLE REAR SEAL APPLICATIONS
730
Stroke: 5.9055" (150.00 MM)

3.5031-3.5047" (88.979-89.019 MM)
Rods:
4.2512-4.2528" (107.980-108.121 MM)
Main:
Main:
3.776" ( 95.910 MM)
1161072
Casting Numbers:
Comments:
DIESEL, DIR INJ, 1YN1 & UP
D334
4.750" (120.65 MM)
.218-.234" (5.537-5.944 MM)
.218-.234
1.685-1.690
D334
4.750" (120.65 MM)
.218-.234" (5.537-5.944 MM)
.218-.234
1.685-1.690
C12
96-03
C12
Cyl Bore:
5.1181-5.1211" (130.000-130.075 MM)
Thrust Width:
@ #4
744
D326
D326
5.125" (130.175 MM)

Stroke: 6.000" (152.4 MM) ***
Cyl Bore:
3.3740-3.3750" (85.7-85.725 MM)
.218-.235" (5.537-5.969 MM)
Rods:
Rod Fillet:
ALL 4.2490-4.2500" (107.925-107.95 MM)
.218-.235*
Main:
Main Fillet:
3.120-3.125" (79.248-79.375 MM)
Main:
Thrust Width:
5H2980, 5H3324, 5H4324, 5H-4324, 7F8695, 7F-8695, 9H9917
Casting Numbers:
Comments:
#39, 40B *FRT FILLET #7 MAIN .328"; **7F8695 49-58 RC GEAR @ REAR PART OF FORGING, USES
SLINGER @ REAR ***6.500" STROKE ALSO USED ON THIS CASTING NUMBER
CATERPILLAR
12.2
744
D337
D337
5.1250-5.1260" (130.175-130.2 MM)

Stroke: 6.000" ***
Cyl Bore:
3.3740-3.3750" (85.7-85.725 MM)
.218-.235" (5.537-5.969 MM)
Rods:
Rod Fillet:
ALL 4.2490-4.2500" (107.925-107.95 MM)
.218-.235*
Main:
Main Fillet:
3.120-3.125" (79.248-79.375 MM)
Main:
Thrust Width:
5H2980, 5H3324, 5H4324, 5H-4324, 7F8695, 7F-8695, 9H9917
Casting Numbers:
Comments:
DW15, 20, 21;619;#37, 38B *FRT FILLET #7 MAIN .328"; **7F8695 49-58 RC GEAR @ REAR PART OF
FORGING, USES SLINGER @ REAR *** 6.500" STROKE ALSO USED ON THIS CASTING NUMBER
CATERPILLAR
14.6
893
1693
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248" (5.893-6.299 MM) *
Main:
Main Fillet:
2.094-2.106" (53.188-53.492 MM)
Main:
Thrust Width:
2P3833, 2P3838, 2P3840, 4M8137, 4S5644, 7M9200, OR5031, OR5124, OR5126
Casting Numbers:
Comments:
C/B BLK, DOHC, 65B782 UP * #7 MAIN .328-.343
Stroke:
Rods:
55
1693

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
6 Cylinders
14.6
893
Engine Model
(cont.)
1693
1693
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248" (5.893-6.299 MM) *
Main:
Main Fillet:
2.094-2.106" (53.188-53.492 MM)
Main:
Thrust Width:
2P3833, 2P3838, 2P3840, 4M8137, 4S5644, 7M9200, 9S3012, OR5031, OR5124, OR5126
Casting Numbers:
Stroke:
Rods:
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
Comments:
DOHC, S/P, 2M6414 VALVE GUIDE * #7 MAIN .328-.343
CATERPILLAR
14.6
893
1693
1693
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248" (5.893-6.299 MM) *
Main:
Main Fillet:
2.094-2.106
Main:
Thrust Width:
2P3833, 2P3838, 2P3840, 4M8137, 4S5644, 7M9200, 9S3012, OR5031, OR5124, OR5126
Casting Numbers:
Comments:
DOHC, S/P, 9S9040 VALVE GUIDE * #7 MAIN .328-.343
Stroke:
Rods:
CATERPILLAR
14.6
893
1693
1693
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248" (5.893-6.299 MM) *
Main:
Main Fillet:
2.094-2.106
Main:
Thrust Width:
2P3833, 2P3838, 2P3840, 4M8137, 4S5644, 7M9200, 9S3012, OR5031, OR5124, OR5126
Casting Numbers:
Comments:
DOHC, S/P, 4N3665 VALVE GUIDE * #7 MAIN .328-.343
Stroke:
Rods:
CATERPILLAR
14.6
893
1693
1693
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248" (5.893-6.299 MM) *
Main:
Main Fillet:
2.094-2.106
Main:
Thrust Width:
2P3833, 2P3838, 2P3840, 4M8137, 4S5644, 7M9200, 9S3012, OR5031, OR5124, OR5126
Casting Numbers:
Comments:
DOHC, S/P, 4N2236 VALVE GUIDE * #7 MAIN .328-.343
Stroke:
Rods:
CATERPILLAR
Stroke:
Rods:
14.6
893
6.500" (165.1 MM)

3.8192-3.8208" (97.008-97.048 MM)
3406
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
5.400-5.402" (137.16-137.211 MM)

.094-.109" (2.388-2.769 MM)
1.759" (44.679 MM)
.094-.109" (2.388-2.769 MM)
1.891-1.897 @#4
4.7492-4.7508" (120.63-120.67 MM)

Main:
Main:
Balance: Internal
6.078" (154.381 MM)
6.078" (154.381 MM)
Rear Seal Diameter:
1W6206, 2W2300, 4N0006, 6N3906, 7C3536, 9Y9112, OR5026, OR5129, OR5132
Casting Numbers:
Comments:
3406B SERIES, F7B1->
CATERPILLAR
14.6
893
3406
3406
5.400-5.402" (137.16-137.211 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.8192-3.8208" (97.008-97.048 MM)
.094-.109" (2.388-2.769 MM)
Rods:
Rod Fillet:
4.7492-4.7508" (120.63-120.67 MM)
.094-.109" (2.388-2.769 MM)
Main:
Main Fillet:
1.891-1.897 @#4
Main:
Thrust Width:
Balance: Internal
6.078" (154.381 MM)
6.078" (154.381 MM)
Rear Seal Diameter:
1W6206, 2W2300, 4N0006, 6N3906, 7C3536, OR5026, OR5129, OR5132
Casting Numbers:
Comments:
92U->
CATERPILLAR
14.6
893
SP
3406
5.400-5.402" (137.16-137.211 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.8192-3.8208" (97.008-97.048 MM)
.094-.109" (2.388-2.769 MM)
Rods:
Rod Fillet:
4.7492-4.7508" (120.63-120.67 MM)
.094-.109" (2.388-2.769 MM)
Main:
Main Fillet:
2.094 @ #4
Main:
Thrust Width:
Balance: Internal
6.078" (154.381 MM)
6.078" (154.381 MM)
Rear Seal Diameter:
1W6206, 2W2300, 4N0006, 6N3906, 7C3536, OR5026, OR5129, OR5132
Casting Numbers:
Comments:
90U & 91U, SPACER PLATE
56
3406

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Stroke:
Rods:
Engine Model
6 Cylinders
14.6
893
6.500" (165.1 MM)

3.5425-3.5441" (89.98-90.02 MM)
3406
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 4.7492-4.7508" (120.63-120.67 MM)

Main:
Main:
4P9121, 7C3536, 9Y9112
Casting Numbers:
Comments:
Year
(cont.)
91-95
5.3937" (137. MM)
.093-.109" (2.362-2.769 MM)
2.125" (53.975 MM)
.093-.109" (2.362-2.769 MM)
1.891-1.897 @#4
3406C TRUCK
CATERPILLAR
14.6
893
Stroke: 6.500" (165.1 MM)

3.5425-3.5441" (89.98-90.02 MM)
Rods:
4.7492-4.7508" (120.63-120.67 MM)
Main:
Main:
4P9121
Casting Numbers:
Comments:
3406E DIESEL TRUCK,OHC,24 VALVE
CATERPILLAR
14.6
3406
Thrust Width:
893
93-05
5DS-1LW
5.400" (137.16 MM)
Cyl Bore:
@ #4
343
343
5.400" (137.16 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
3.5395-3.5405" (89.903-89.929 MM)
SHOT PEENED
Rods:
Rod Fillet:
#1 4.4995-4.5005" (114.287-114.313 MM)
SHOT PEENED**
Main:
Main Fillet:
2.103-2.106*
Main:
Thrust Width:
2P3838, 2P3840, 4M8137, 4S5644, 7M9200, OR5031
Casting Numbers:
Comments:
S/P BLK, D343, 33B3028-> 62B6728-> * CHECK CASTING #S. ** ALL EXCEPT R/MAIN
CATERPILLAR
14.6
893
Stroke: 6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
Rods:
4.4995-4.5005" (114.287-114.313 MM)
Main:
Main:
Comments:
343G
CATERPILLAR
14.6
893
14.6
99-05
C15
5.4000-5.4020" (137.160-137.210 MM)
Cyl Bore:
893
343
5.400" (137.16 MM)
C15
Stroke: 6.500" (165.100 MM)

3.5425-3.5441" (89.980-90.020 MM)
Rods:
4.7492-4.7508" (120.630-120.670 MM)
Main:
Main:
Comments:
DIESEL
CATERPILLAR
343
Cyl Bore:
D343
D343
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248 *
Main:
Main Fillet:
2.094-2.106" (53.188-53.492 MM)
Main:
Thrust Width:
2P3838, 2P3840, 4M8137, 4S5644, 7M9200, OR5031, OR5124, OR5126
Casting Numbers:
Comments:
C/B BLK, DOHC, 33B1, 62B1.33B3 * #7 MAIN .328-.343
Stroke:
Rods:
CATERPILLAR
14.6
893
D343
D343
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
5.400" (137.16 MM)

Cyl Bore:
.232-.248" (5.893-6.299 MM)
Rod Fillet:
2.161-2.167" (54.889-55.042 MM)
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
.232-.248" *
Main:
Main Fillet:
2.094-2.106" (53.188-53.492 MM)
Main:
Thrust Width:
2P3838, 2P3840, 4M8137, 4S5644, 7M9200, OR5031, OR5124, OR5126
Casting Numbers:
Comments:
DOHC, C/B, 4N3666 VALVE GUIDE * #7 MAIN .328-.343
Stroke:
Rods:
CATERPILLAR
Stroke:
Rods:
14.6
893
G343
6.500" (165.1 MM)

3.5395-3.5405" (89.903-89.929 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
4.4995-4.5005" (114.287-114.313 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2P3838, 2P3840, 4M8137, 4S5644, 7M9200, OR5031
Casting Numbers:
Comments:
DOHC, 33B1, 62B1.33B3 * #7 MAIN .328-.343
CATERPILLAR
15.6
Stroke: 6.700" (170.180 MM)

3.5425-3.5441" (89.980-90.020 MM)
Rods:
4.7492-4.7508" (120.630-120.670 MM)
Main:
Main:
Comments:
DIESEL
955
C16
Cyl Bore:
57
G343
5.400" (137.16 MM)
.232-.248" (5.893-6.299 MM)
2.161-2.167" (54.889-55.042 MM)
.232-.248*
2.094-2.106
C16
5.4984-5.5004" (139.660-139.710 MM)

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
6 Cylinders
16.3
Engine Model
(cont.)
992
5.125" (130.175 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.313" (7.95 MM)
Rods:
Rod Fillet:
#1 3.7490-3.7500" (95.225-95.25 MM)
.313" (7.950 MM)
Main:
Main Fillet:
3.8725
Main:
Thrust Width:
2B-6488, 3B-7934, 3B-9511, 4F-8511, 4H-7032, 6F-1913, 7B-7937, 7B-9511, 7B-9620
Casting Numbers:
Comments:
SMALL MAINS SMALL MAINS
CATERPILLAR
20.4
1,246
13000
13000
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.313" (7.950 MM)
Rods:
Rod Fillet:
3.7490-3.750" (95.225-95.25 MM)
.313" (7.950 MM)
Main:
Main Fillet:
3.8725
Main:
Thrust Width:
2B-6488, 3B-7934, 3B-7937, 3B-9511, 4F-8511, 4H-7032, 6F-1913, 7B-6225, 7B-7937, 7B-9511, 7B-9620,
Casting Numbers:
8H-5320
Comments:
20.4 LTR, SMALL MAINS OLD D8 SMALL MAINS
CATERPILLAR
20.4
1,246
D342
D342
5.750-5.752" (146.050-146.100 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6230-3.6250" (92.024-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
4.2590-4.2610" (108.179-108.229 MM)
.296-.312
Main:
Main Fillet:
3.870-3.875" (98.298-98.425 MM)
Main:
Thrust Width:
4F8511, 4H7032, 4M0447, 4S7406, 6F1913, 6N2822, 8H5320, OR5045, OR5072, OR5080, OR5083,
Casting Numbers:
OR5181, OR5184
Comments:
S/P;31, 32B1, 17S1, 50V1 OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
D342
D342
5.750-5.752" (146.050-146.100 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6230-3.6250" (92.024-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
4.2590-4.2610" (108.179-108.229 MM)
.296-.312"
Main:
Main Fillet:
3.870-3.875" (98.298-98.425 MM)
Main:
Thrust Width:
Casting Numbers:
OR5181, OR5184
Comments:
C/B BLK;31, 32B1;17S1;50V1 OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
D342
D342
5.750-5.752" (146.050-146.100 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
4.2590-4.2610" (108.179-108.229 MM)
.296-.312"
Main:
Main Fillet:
3.870-3.875" (98.298-98.425 MM)
Main:
Thrust Width:
2B6488, 3B7934, 3B7937, 3B9511, 4F8511, 4H7032, 4M0447, 4S7406, 6F1913, 6N2822, 7B7937,
Casting Numbers:
7B9511, 7B9620, 8H5320, OR5045, OR5072, OR5080, OR5083, OR5181, OR5184
Comments:
C/B BLK;31, 32B OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
D342
D342
5.750-5.752" (146.050-146.100 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6230-3.6250" (92.024-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
4.2590-4.2610" (108.179-108.229 MM)
.296-.312"
Main:
Main Fillet:
3.870-3.875" (98.298-98.425 MM)
Main:
Thrust Width:
Casting Numbers:
OR5181, OR5184
Comments:
S/P BLK;31, 32, 49, 50B OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
D342
D342
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6230-3.6250" (92.024-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
4.2590-4.2610" (108.179-108.229 MM)
.296-.312"
Main:
Main Fillet:
3.870-3.875" (98.298-98.425 MM)
Main:
Thrust Width:
Casting Numbers:
OR5181, OR5184
Comments:
C/B BLK;31, 32, 49, 50B OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
D8
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
.296-.312" (7.518-7.925 MM)
Main:
Main Fillet:
3.870-3.875
Main:
Thrust Width:
2B6488, 3B7934, 3B7937, 3B9511, 4F8511, 4H7032, 4M447, 6F1913, 7B7937, 7B9511, 7B9620, 8H5320
Casting Numbers:
Comments:
C/B BLK 14A OE UNDERSIZE AVLBL .025 & .050
58
D8

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
Engine Model
6 Cylinders
20.4
1246
(cont.)
D8
D8
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
.296-.312" (7.518-7.925 MM)
Main:
Main Fillet:
3.870-3.875
Main:
Thrust Width:
2B6488, 3B7934, 3B7937, 3B9511, 4F8511, 4H7032, 4M447, 6F1913, 7B7937, 7B9511, 7B9620, 8H5320
Casting Numbers:
Comments:
C/B;EARLY 36, 46A-10724 OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2600" (108.179-108.204 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
C/B;LATE 36, 46A OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
D8
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
D8
5.750" (146.05 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.518-7.925 MM)
3.870-3.875
D8
D8
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.6240-3.6250" (92.05-92.075 MM)
.296-.312" (7.518-7.925 MM)
Rods:
Rod Fillet:
3.7490-3.7500" (95.225-95.25 MM)
.296-.312" (7.518-7.925 MM)
Main:
Main Fillet:
3.870-3.875
Main:
Thrust Width:
2B6488, 3B7934, 3B7937, 3B9511, 4F8511, 4H7032, 4M447, 6F1913, 7B7937, 7B9511, 7B9620, 8H5320
Casting Numbers:
Comments:
C/B;35A OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2610" (108.179-108.229 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
S/P;46A OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2610" (108.179-108.229 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
C/B;46A OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
20.4
1,246
CATERPILLAR
20.4
1,246
CATERPILLAR
20.4
D8
5.750" (146.05 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.518-7.925 MM)
3.870-3.875
D8K
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
D8K
5.750" (146.05 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.518-7.925 MM)
3.870-3.875
D8K
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1,246
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2610" (108.179-108.229 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
S/P OE UNDERSIZE AVLBL .025 & .050
D8
5.750" (146.05 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.518-7.925 MM)
3.870-3.875
D8
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2610" (108.179-108.229 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
S/P BLOCK OE UNDERSIZE AVLBL .025 & .050
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2610" (108.179-108.229 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
C/B BLOCK OE UNDERSIZE AVLBL .025 & .050
D8
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
D8K
5.750" (146.05 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.508-7.925 MM)
3.870-3.875
G342
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
59
G342
5.750-5.752" (146.050-146.100 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.518-7.925 MM)
3.870-3.875"

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
20.4
1246
(cont.)
G342
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
G342
5.750-5.752" (146.050-146.100 MM)
.296-.312" (7.518-7.925 MM)
.296-.312" (7.518-7.925 MM)
3.870-3.875"
C/B OE UNDERSIZE AVLBL .025 & .050
CATERPILLAR
Stroke:
Rods:
Engine Model
6 Cylinders
Stroke: 8.000" (203.2 MM)

3.6230-3.6250" (92.024-92.075 MM)
Rods:
4.2590-4.2610" (108.179-108.229 MM)
Main:
Main:
4S7406, 6N2822, OR5045, OR5072
Casting Numbers:
Comments:
Year
24.1
1,473
353
8.000" (203.2 MM)

4.0980-4.100" (104.089-104.140 MM)
353
6.250" (158.75 MM)
.297" (7.544 MM)
2.6350-2.6400" (66.929-67.056 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
4.5980-4.6000" (116.789-116.840 MM)

Main:
3.6845
Main:
Thrust Width:
1M2799, 1P9501, 2P2800, 6H5840, OR5029, OR5186
Casting Numbers:
Comments:
D9, 24.1 LTR, SPACER PLATE, SMALL MAIN BORE BLOCK LARGE MAINS
CATERPILLAR
Stroke:
Rods:
24.1
1,473
8.000" (203.2 MM)

4.1230-4.1250" (104.724-104.775 MM)
C/B
353
4.6230-4.6250" (117.424-117.475 MM)

Main:
Main:
Thrust Width:
1M2799, 1P9501, 2P2800, 4H-9591, 6H5840, OR5029, OR5186
Casting Numbers:
Comments:
D9, 24.1 LTR, COUNTERBORE BLOCK LARGE MAINS
CATERPILLAR
Stroke:
Rods:
24.1
1,473
8.000" (203.2 MM)

4.1230-4.1250" (104.724-104.775 MM)
4.6230-4.6250" (117.424-117.475 MM)

Main:
Main:
1M2799, 4H-9591, 6H-5840
Casting Numbers:
Comments:
SERIAL #66A, 3266 ->
D9
D9
6.250-6.252" (158.75-158.801 MM)
.297" (7.544 MM)
2.635-2.640" (66.929-67.056 MM)
Thrust Width:
3.6845"
8 Cylinders
8.6
522
Stroke: 4.100" (104.14 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
9L8123, 9L9230
Casting Numbers:
Comments:
3.6845
Cyl Bore:
Rod Fillet:
Rod Width:
CATERPILLAR
CATERPILLAR
353
6.250" (158.75 MM)
.297" (7.544 MM)
2.6350-2.6400" (66.929-67.056 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
1140
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1140
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.236-1.240
36B;96, 97, 98M;65, 67, 68P;95, 96, 97B
CATERPILLAR
8.6
522
Stroke: 4.100" (104.14 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
9L8123, 9L9230
Casting Numbers:
Comments:
36B; 96, 97, 98M; 95, 96, 97B; 65, 67, 68P
CATERPILLAR
8.6
1145
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
522
Stroke: 4.100" (104.14 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
9L8123, 9L9230
Casting Numbers:
Comments:
36B; 96, 97, 98M; 95, 96, 97B; 65, 66, 67, 68P
1145
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.236-1.240
3140
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
60
3140
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.236-1.240

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Engine Model
8 Cylinders
8.6
522
(cont.)
3145
Stroke: 4.100" (104.14 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
9L8123, 9L9230
Casting Numbers:
Comments:
Year
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3145
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.236-1.240
36B; 96, 97, 98M; 95, 96, 97B; 65, 66, 67, 68P
CATERPILLAR
9.4
573
1150
Stroke: 4.500" (114.3 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
9L8012, 9L8112, 9L9231
Casting Numbers:
Comments:
36B; 96, 97, 98M; 95, 96, 97B; 65, 66, 67, 68P
CATERPILLAR
10.4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
636
1160
Stroke: 5.0000" (127.000mm)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
1W7420, 9L8013, 9L8400, 9L9232, 9N6015
Casting Numbers:
Comments:
36B; 96, 97, 98M; 95, 96, 97B; 65, 66, 67, 68P
CATERPILLAR
10.4
10.4
10.4
1160
4.5000" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.236-1.240
3150
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
636
3150
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.256-1.260
3160
Stroke: 4.100" (104.14 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
1W7420, 9L8013, 9L8400, 9L9232, 9N6015
Casting Numbers:
Comments:
36B; 96, 97, 98M; 95, 96, 97B; 65, 66, 67, 68P
CATERPILLAR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
636
Stroke: 4.100" (104.14 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Balance: External
9L8012, 9L8112, 9L9231
Casting Numbers:
Comments:
36B; 96, 97, 98M; 95, 96, 97B; 65, 66, 67, 68P
CATERPILLAR
1150
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.256-1.260
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
636
3160
4.500" (114.3 MM)
.094-.109" (2.388-2.769 MM)
.094-.109" (2.388-2.769 MM)
1.236-1.240
3208
3208
4.5000-4.5015" (114.3-114.338 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7502" (69.825-69.855 MM)
.093-.109" (2.362-2.769 MM)
Rods:
Rod Fillet:
3.4989-3.5001" (88.872-88.903 MM)
.093-.109" (2.362-2.769 MM)
Main:
Main Fillet:
1.2578-1.2582 @ #4
Main:
Thrust Width:
Balance: External
4.8755" (123.838 MM) *
Rear Seal Diameter:
0R5051, 4N8453, 4N8454, 9N0300, 9N0303, 9N300, 9N6202, 9N6220, OR5053, OR5163, OR5561
Casting Numbers:
Comments:
#3Z1 AND UP *W/OUT WEAR SLEEVE,THRUST BRG LNGTH:1.253
CATERPILLAR
10.4
636
3208
3208
4.500-4.5015" (114.3-114.338 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7502" (69.825-69.855 MM)
.093-.109" (2.362-2.769 MM)
Rods:
Rod Fillet:
3.4989-3.5001" (88.872-88.903 MM)
.093-.109" (2.362-2.769 MM)
Main:
Main Fillet:
1.2578-1.2582 @ #4
Main:
Thrust Width:
Balance: External
4.8755" (123.838 MM) *
Rear Seal Diameter:
0R5051, 4N8453, 4N8454, 9N0300, 9N0303, 9N300, 9N303, 9N6202, 9N6220, OR5053, OR5163, OR5561
Casting Numbers:
Comments:
SERIAL #S 75V1-> & 90N1-> NON TURBO *WITHOUT WEAR SLEEVE,THRUST BEAR LENGTH STD:1.253
61

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
8 Cylinders
10.4
636
Engine Model
(cont.)
3208
3208
4.500-4.5015" (114.3-114.338 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7502" (69.825-69.855 MM)
.093-.109" (2.362-2.769 MM)
Rods:
Rod Fillet:
3.4989-3.5001" (88.872-88.903 MM)
.093-.109" (2.362-2.769 MM)
Main:
Main Fillet:
1.2578-1.2582 @ #4
Main:
Thrust Width:
Balance: External
4.8755" (123.838 MM) *
Rear Seal Diameter:
0R5051, 4N8453, 4N8454, 9N0300, 9N0303, 9N300, 9N303, 9N6202, 9N6220, OR5053, OR5163,
Casting Numbers:
OR5561
SERIAL #S 40S1-> *WITHOUT WEAR SLEEVE,THRUST BRG LENGTH STD:1.253
Comments:
CATERPILLAR
10.4
636
TURBO
3208
87-92
3208
4.500-4.5015" (114.3-114.338 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7502" (69.825-69.855 MM)
.093-.109" (2.362-2.769 MM)
Rods:
Rod Fillet:
3.4989-3.5001" (88.872-88.903 MM)
.093-.109" (2.362-2.769 MM)
Main:
Main Fillet:
1.2578-1.2582 @ #4
Main:
Thrust Width:
Balance: External
4.8755" (123.838 MM) *
Rear Seal Diameter:
0R5051, 4N8453, 4N8454, 9N0300, 9N0303, 9N300, 9N6202, 9N6220, OR5053, OR5163, OR5561
Casting Numbers:
Comments:
3Z1, DUAL VALVE SPRING *W/OUT WEAR SLEEVE,THRUST BRG LNGTH:1.253
CATERPILLAR
Stroke:
Rods:
11.5
700
5.500" (139.7 MM)

3.5395-3.5405" (89.903-89.929 MM)
1676
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
1676
4.500" (114.3 MM)
.234-.250" (5.944-6.35 MM)
2.831-2.837" (71.907-72.06 MM)
.234-.250" (5.944-6.350 MM)
1.781-1.787" (45.237-45.390 MM)
4.4995-4.5005" (114.287-114.313 MM)

Main:
Main:
1S5420, 4S9284, 4S9285, 7N9673
Casting Numbers:
Comments:
23H, 42H,55B1,60B1,980 SER# 42H1,COUNTERBORED,DOHC CRK GEAR LASH .002-.016
CATERPILLAR
Stroke:
Rods:
11.5
700
5.500" (139.7 MM)

3.5395-3.5405" (89.903-89.929 MM)
4.4995-4.5005" (114.287-114.313 MM)

Main:
Main:
1S5420, 4S9284, 4S9285, 7N9673
Casting Numbers:
Comments:
23H, 42H, 55B1, 60B1 CRK GEAR LASH .002-.016
CATERPILLAR
18.0
D336
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
1,099
D336
4.500" (114.3 MM)
.234-.250" (5.944-6.35 MM)
2.831-2.837" (71.907-72.06 MM)
.234-.250
1.781-1.787" (45.237-45.390 MM)
3408
3408
5.4010-5.4020" (137.185-137.211 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
3.8192-3.8208" (97.008-97.048 MM)
.0940-.1090" (2.388-2.769 MM)
Rods:
Rod Fillet:
4.7492-4.7508" (120.63-120.67 MM)
.0940-.1090" (2.388-2.769 MM)
Main:
Main Fillet:
1.891-1.897 @ #4
Main:
Thrust Width:
1W5008, 1W6208, 1W6209, 4N0008, 7N3408, OR5066, OR5067, OR5179, OR5556
Casting Numbers:
Comments:
988B WHEEL LOADER
CATERPILLAR
18.0
1,099
D8L
3408
5.4010-5.4020" (137.185-137.211 MM)

Stroke: 6.000" (152.400 MM)
Cyl Bore:
3.8192-3.8208" (97.008-97.048 MM)
.094-.109" (2.388-2.769 MM)
Rods:
Rod Fillet:
4.7492-4.7508" (120.630-120.670 MM)
.094-.109" (2.388-2.769 MM)
Main:
Main Fillet:
1.891-1.897" @ #4
Main:
Thrust Width:
1W5008, 1W6208, 1W6209, 4N0008, 7N3408, OR5066, OR5067, OR5179, OR5556
Casting Numbers:
Comments:
3408 ENGINE
CATERPILLAR
19.5
1,191
641
Stroke: 6.500" (165.1 MM)

Cyl Bore:
4.3745-4.3755" (111.112-111.138 MM)
Rods:
4.7495-4.7505" (120.637-120.663 MM)
Main:
Main:
Comments:
64F,641&651,15A-10,GROUP 40;77F,666,15A-10,GP 40.1
CATERPILLAR
19.5
Stroke: 6.500" (165.1 MM)

4.3745-4.3755" (111.112-111.138 MM)
Rods:
5.2510-5.2520" (133.375-133.401 MM)
Main:
Main:
1S2512, 2S0758, 7M2700
Casting Numbers:
Comments:
39J1 -> 39J1157
1,191
641
5.400" (137.16 MM)
D346
D346
Cyl Bore:
5.400" (137.16 MM)
Thrust Width:
2.143-2.149" (54.432-54.585 MM)
62

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Year
8 Cylinders
19.5
1191
Engine Model
(cont.)
D346
D346
5.400" (137.16 MM)

Cyl Bore:
.299" (7.595 MM)
Rod Fillet:
3.371-3.377" (85.623-85.776 MM)
Rod Width:
5.2489-5.2506" (133.322-133.365 MM)
.299" (7.595 MM)
Main:
Main Fillet:
2.380-2.392" (60.452-60.757 MM)
Main:
Thrust Width:
6N8314, 8N1910, 9S2303, OR5033, OR5077, OR5086, OR5098, OR5134, OR5135, OR5137, OR5138
Casting Numbers:
Stroke:
Rods:
6.500" (165.1 MM)

4.3739-4.3756" (111.097-111.14 MM)
Comments:
C/B, DOHC UNDERSIZE BRGS .025 & .050
CATERPILLAR
19.5
1,191
D346
D346
6.500" (165.1 MM)

4.3739-4.3756" (111.097-111.14 MM)
5.400" (137.16 MM)

Cyl Bore:
.299" (7.595 MM)
Rod Fillet:
3.371-3.377" (85.623-85.776 MM)
Rod Width:
5.2489-5.2506" (133.322-133.365 MM)
.299" (7.595 MM)
Main:
Main Fillet:
2.380-2.392" (60.452-60.757 MM)
Main:
Thrust Width:
6N8314, 8N1910, 9S2303, OR5033, OR5077, OR5086, OR5098, OR5134, OR5135, OR5137, OR5138
Casting Numbers:
Comments:
S/P, DOHC, 39, 40J, 98N OE UNDERSIZE BRGS .025 & .050
Stroke:
Rods:
CATERPILLAR
27.2
1,662
364
Stroke: 8.000" (203.2 MM)

4.6234-4.6250" (117.434-117.475 MM)
Rods:
5.4984-5.5000" (139.659-139.7 MM)
Main:
Main:
5F-9587
Casting Numbers:
CATERPILLAR
27.2
32.2
CATERPILLAR
32.2
5.750" (146.05 MM)

.375" (9.525 MM)
Thrust Width:
4.6225" (117-411 MM)
379
1,964
D379
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2,105
2,105
Thrust Width:
CATERPILLAR
34.5
3500
6.693" (170.002 MM)
@ CENTER
3500
Stroke: 7.479" (190.000 MM)

Cyl Bore:
5.3140-5.3160" (134.976-135.026 MM)
Rods:
6.2982-6.3002" (159.974-160.025 MM)
Main:
Main:
Thrust Width:
Comments:
NATURAL GAS ENGINE .025 & .050 UNDERSIZE BRG AVLBL
2,105
Stroke: 7.480" (189.992 MM)

5.3140-5.3160" (134.976-135.026 MM)
Rods:
6.2982-6.3002" (159.974-160.025 MM)
Main:
Main:
1W6408, 7W0208, 8N9393, OR5434
Casting Numbers:
Comments:
DIESEL .025 & .050" UNDERSIZE BRG AVLBL
D379
6.250" (158.75 MM)
.399-.413" (10.135-10.49 MM)
4.6195-4.6295" (117.335-117.589 MM)
.399-.413" (10.135-10.490 MM)
2.997-3.007" @ REAR
3500
5.3140-5.3160" (134.976-135.026 MM)

Rods:
6.2982-6.3002" (159.974-160.025 MM)
Main:
Main:
Comments:
DIESEL .025 & .050 UNDERSIZE BRG AVLBL
34.5
379
6.250" (158.75 MM)
Cyl Bore:
CATERPILLAR
375
Cyl Bore:
Rod Fillet:
Cyl Bore:
5.7482-5.7502" (146.004-146.055 MM)

Main:
Main:
5L2684, OR5055, OR5056, OR5341
Casting Numbers:
Comments:
72B1 -> 72B467
34.5
4.6225" (117.411 MM)
1,964
8.000" (203.2 MM)

4.9990-5.0000" (126.975-127. MM)
CATERPILLAR
Thrust Width:
375
Stroke: 8.000" (203.2 MM)

4.9990-5.0000" (126.975-127. MM)
Rods:
5.7490-5.7500" (146.025-146.05 MM)
Main:
Main:
5L2684, OR5055, OR5056, OR5341
Casting Numbers:
Comments:
72B1-> 72B467
Stroke:
Rods:
5.750" (146.05 MM)

.375" (9.525 MM)
1,662
Stroke: 8.000" (203.2 MM)

4.6234-4.6250" (117.434-117.475 MM)
Rods:
5.4984-5.5000" (139.659-139.7 MM)
Main:
Main:
5F-9587
Casting Numbers:
CATERPILLAR
364
Cyl Bore:
Rod Fillet:
3500
6.693" (170.002 MM)
@ CENTER
3508
3508
Cyl Bore:
6.6929-6.6949" (170.-170.05 MM)
Thrust Width:
2.831-2.839" @ CENTER
63

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Stroke:
Rods:
Engine Model
12 Cylinders
27.0
1649
6.000" (152.4 MM)

3.8192-3.8208" (97.008-97.048 MM)
4.7492-4.7508" (120.630-120.670 MM)

Main:
Main:
1W6212, 4N0012, OR5069, OR5070, OR5339
Casting Numbers:
Comments:
Year
3412
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3412
5.4010-5.4020" (137.185-137.211 MM)
.0940-.1090" (2.388-2.769 MM)
3.336" (84.734 MM)
.0940-.1090" (2.388-2.769 MM)
1.891-1.897" (48.031-48.184 MM)
DECK PLATE BLOCK
CATERPILLAR
29.3
1,786
Stroke: 6.500" (165.1 MM)

4.3745-4.3755" (111.112-111.138 MM)
Rods:
5.2510-5.2520" (133.375-133.401 MM)
Main:
Main:
Comments:
D348
CATERPILLAR
29.3
348
348
Cyl Bore:
5.400" (137.16 MM)
Thrust Width:
2.385
1,786
D348
D348
6.500" (165.1 MM)

4.3739-4.3756" (111.097-111.14 MM)
5.400-5.402" (137.16-137.211 MM)

Cyl Bore:
.299" (7.595 MM)
Rod Fillet:
3.371-3.377" (85.623-85.776 MM)
Rod Width:
5.2489-5.2506" (133.322-133.365 MM)
.299" (7.595 MM)
Main:
Main Fillet:
2.380-2.392" (60.452-60.757 MM)
Main:
Thrust Width:
1W7575, 6N7898, 9S1994, OR5037, OR5080, OR5089, OR5090, OR5092, OR5093
Casting Numbers:
Comments:
S/P, DOHC, 36, 48J; 57K UNDERSIZE BRGS .025 & .050
Stroke:
Rods:
CATERPILLAR
40.8
2,492
Stroke: 8.000" (203.2 MM)

4.6234-4.6250" (117.434-117.475 MM)
Rods:
5.4984-5.5000" (139.659-139.7 MM)
Main:
Main:
5F-9586
Casting Numbers:
Comments:
D386
CATERPILLAR
40.9
48.3
Thrust Width:
4.6225" (117.411 MM)
397
CATERPILLAR
48.8
5.750" (146.05 MM)

.375" (9.525 MM)
Thrust Width:
4.6225
2,946
398
2,976
D398
Cyl Bore:
Rod Fillet:
Rod Width:
5.7482-5.7502" (146.004-146.055 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3N3000, 4L3771, 4W7612, OR5058, OR5059, OR5343
Casting Numbers:
Comments:
48.3L * THRUST @ REAR
51.8
398
6.250" (158.75 MM)
8.000" (203.2 MM)

4.9990-5.0000" (126.975-127. MM)
CATERPILLAR
397
Cyl Bore:
Rod Fillet:
Stroke: 8.000" (203.2 MM)

Cyl Bore:
4.9990-5.0000" (126.975-127. MM)
Rods:
5.7490-5.7500" (146.025-146.05 MM)
Main:
Main:
3N3000, 4L3771, 4W7612, OR5058, OR5059, OR5343
Casting Numbers:
Comments:
48.3L D398
Stroke:
Rods:
386
5.750" (146.05 MM)
.375" (9.525 MM)
2,493
Stroke: 8.000" (203.2 MM)

4.6234-4.6250" (117.434-117.475 MM)
Rods:
5.4984-5.5000" (139.659-139.7 MM)
Main:
Main:
5F-9586
Casting Numbers:
Comments:
D397
CATERPILLAR
386
Cyl Bore:
Rod Fillet:
3,158
D398
6.2500-6.2520" (158.75-158.801 MM)
.399-.413" (10.135-10.49 MM)
4.6195-4.6295" (117.335-117.589 MM)
.399-.413" (10.135-10.490 MM)
2.997-3.007 *
3512
Stroke: 7.480" (189.992 MM)

Cyl Bore:
5.3140-5.3160" (134.976-135.026 MM)
Rods:
6.2982-6.3002" (159.974-160.025 MM)
Main:
Main:
Thrust Width:
1W5000, 4P2612, 7W0212, 8N7777, OR5435, OR6215
Casting Numbers:
Comments:
DIESEL .025 & .050 UNDERSIZE BRG AVLBL
64
3512
6.693" (170.002 MM)
2.831-2.839" @ CENTER

Make
Liter
CID
Vin
Model
CATERPILLAR
CATERPILLAR
Engine Model
12 Cylinders
221.7
13527
Stroke: 11.8110" (299.999 MM)

8.5029-8.5049 *" (215.974-216.024 MM)
Rods:
9.8415-9.8435 *" (249.974-250.025 MM)
Main:
Main:
13, 527 CID DIESEL * .020 & .040 UNDERSIZE AVLBL
Comments:
(cont.)
3612
3612
11.0236" (279.999 MM)
Cyl Bore:
@ REAR
Thrust Width:
THRUST WASHER THKNS .541-.545
CATERPILLAR
CATERPILLAR
Year
16 Cylinders
39.0
2382
D349
D349
5.400-5.402" (137.16-137.211 MM)

Cyl Bore:
.299" (7.595 MM)
Rod Fillet:
3.371-3.377" (85.623-85.776 MM)
Rod Width:
5.2489-5.2506" (133.322-133.365 MM)
.299" (7.595 MM)
Main:
Main Fillet:
2.380-2.392" (60.452-60.757 MM)
Main:
Thrust Width:
6N8338, 9S8662, OR5074, OR5083, OR5084, OR5095, OR5096, OR5401
Casting Numbers:
Stroke:
Rods:
6.500" (165.1 MM)

4.3739-4.3756" (111.097-111.14 MM)
Comments:
S/P, DOHC, 61, 62P;32R HE UNDERSIZE BRGS .025 & .050
CATERPILLAR
Stroke:
Rods:
64.4
3,928
8.000" (203.2 MM)

4.9990-5.0000" (126.975-127. MM)
5.7482-5.7502" (146.004-146.055 MM)

Main:
Main:
4W7716, 6L7500, OR5061, OR5062, OR5345
Casting Numbers:
Comments:
64.4L
CATERPILLAR
69.0
D399
4,210
3516
Stroke: 7.480" (189.992 MM)

Cyl Bore:
5.3140-5.3160" (134.976-135.026 MM)
Rods:
6.2982-6.3002" (159.974-160.025 MM)
Main:
Main:
Thrust Width:
4P2616, 7E4316, 7W0216, 8N9493, OR5063, OR5437
Casting Numbers:
CATERPILLAR
294.0
17,942
Stroke: 11.800" (299.72 MM)

8.5029-8.5049 *" (215.974-216.024 MM)
Rods:
9.8415-9.8435 *" (249.974-250.025 MM)
Main:
Main:
Comments:
17, 942 CID DIESEL * .020 & .040 UNDERSIZE AVLBL
2.831-2.839" @ CENTER
3616
@ REAR
Thrust Width:
3.7
226
47-64
Cyl Bore:
3.312" (84.125 MM)
Thrust Width:
1.6380
CHRIS-CRAFT IN-LINE
4 Cylinders
2.2
133
Stroke: 4.000" (101.600 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
1.9870-1.9880" (50.470-50.495 MM)
Main:
Main:
4 CYCLE, L HEAD
Comments:
A&B
6 Cylinders
3.6
221
Stroke: 4.1250" (104.775 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4 CYCLE, L HEAD, 3.3750" BORE
Comments:
CHRIS-CRAFT IN-LI
A&B
3.2500" (82.550 MM)
Cyl Bore:
CHRIS-CRAFT IN-LINE
CHRIS-CRAFT IN-LI
3616
11.000" (279.4 MM)
Cyl Bore:
6 Cylinders
Stroke: 4.375" (111.125 MM)

2.0617-2.0627" (52.367-52.393 MM)
Rods:
#1 2.3742-2.3752" (60.305-60.33 MM)
Main:
Main:
F0600C600, F600C600
Casting Numbers:
CHRIS-CRAFT IN-LI
3516
6.693" (170.002 MM)
CHECKER
CHECKER
D399
6.250" (158.75 MM)
.399-.413" (10.135-10.49 MM)
4.6195-4.6295" (117.335-117.589 MM)
.399-.413" (10.135-10.490 MM)
2.997-3.007" @ REAR
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.8
230
Stroke: 4.1250" (104.775 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD, 3.4375" BORE, 100 HP & 95 HP
K
3.3750" (85.725 MM)
Cyl Bore:
K
Cyl Bore:
65
K
3.4375" (87.312 MM)

Make
Liter
CID
Vin
Model
Year
CHRIS-CRAFT IN-LINE
CHRIS-CRAFT IN-LI
6 Cylinders
3.9
237
3.9
237
3.9
KL
237
5.2
KLC & KBL
5.6
320
5.6
339
MCL
339
6.6
MCL
4.000" (101.600 MM)
Cyl Bore:
ML & MBL
Stroke: 4.500" (114.300 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD
CHRIS-CRAFT IN-LI
M
4.000" (101.600 MM)
Cyl Bore:
Stroke: 4.500" (114.300 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD
CHRIS-CRAFT IN-LI
404
W & WB
Cyl Bore:
W & WB
4.2500" (107.950 MM)
CHRYSLER
4 Cylinders
1.4
85
Stroke: 3.030" (76.962 MM)

2.160" (54.864 MM)
Rods:
1.730" (43.942 MM)
Main:
Main:
257
Casting Numbers:
Comments:
ML & MBL
4.000" (101.600 MM)
Cyl Bore:
Stroke: 4.7500" (120.650 MM)

2.2470-2.2480" (57.074-57.099 MM)
Rods:
2.6220-2.6230" (66.599-66.624 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD
CHRYSLER
KLC & KBL
3.4375" (81.312 MM)
Cyl Bore:
Stroke: 4.250" (107.950 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD
CHRIS-CRAFT IN-LI
KL
3.4375" (87.312 MM)
Cyl Bore:
Stroke: 4.250" (107.950 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD
CHRIS-CRAFT IN-LI
KFL
3.4375" (87.312 MM)
Cyl Bore:
Stroke: 4.250" (107.950 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
4 CYCLE, L HEAD
CHRIS-CRAFT IN-LI
(cont.)
KFL
Stroke: 4.250" (107.950 MM)

1.9870-1.9880" (50.470-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
4 CYCLE, L HEAD
Comments:
CHRIS-CRAFT IN-LI
Engine Model
ENCORE
83-84
Cyl Bore:
2.990" (75.946 MM)
Cyl Bore:
2.992" (75.997 MM)
ENCORE, MULTIPORT FI
CHRYSLER
1.4
85
Stroke: 3.031" (76.987 MM)

1.7309-1.7315" (43.965-43.98 MM)
Rods:
2.1568-2.1572" (54.783-54.793 MM)
Main:
Main:
257
Casting Numbers:
Comments:
RENAULT ALLIANCE
CHRYSLER
1.4
81-87
Thrust Width:
86
MMC
@ #3
79-84
G12B, G12BH
2.913" (73.99 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.6528-1.6535" (41.981-41.999 MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
.948 @ #3
Main:
Thrust Width:
G1
Casting Numbers:
Comments:
SOHC, MMC, COLT, COLT HATCHBACK G12B-H, CHAMP PILOT HOLE DIAM: 1979=1.030, 1980-84=1.260
66

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
Stroke:
Rods:
4 Cylinders
1.5
91
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
1.8890-1.8898" (47.981-48.001 MM)

Main:
Main:
G1, G1, G1
Casting Numbers:
Comments:
COLT
1.5
91
CHRYSLER
1.5
91
G15B
.850" (21.59 MM)
Thrust Width:
.948 @ #3
.744-.746" BETWEEN THE OIL PUMP
COLT
89-90
4G15
2.9724-2.9736" (75.499-75.529 MM)
Cyl Bore:
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
85-88
Rod Width:
Rod Width:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Thrust Width:
4G1, G1
Casting Numbers:
Comments:
MMC, 4G15, COLT/SUMMIT, 12 VALVE HEAD * ROD WIDTH .790 IN 1990
DIAM 1.030
Stroke:
Rods:
(cont.)
2.9724-2.9736" (75.499-75.529 MM)
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
Engine Model
Cyl Bore:
MMC, G15B, COLT PILOT BEARING DIAMETER = 1.260"

DRIVE FLATS
CHRYSLER
Stroke:
Rods:
Year
.850" (21.59 MM) *

.948 @ #3
PILOT BRG HOLE
COLT
90-96
G13V
2.9724-2.9736" (75.499-75.529 MM)
Cyl Bore:
.790" (20.066 MM)

Rod Width:
1.8890-1.8898" (47.981-48.001 MM)
Main:
.948 @ #3
Main:
Thrust Width:
G1
Casting Numbers:
Comments:
MMC, COLT, SUMMIT, G13V 12 VALVE 2 INTAKE 1 EXH .744-.746" BETWEEN FLATS FOR OIL PUMP DRIVE
PILOT BRG DIAM 1.030
CHRYSLER
1.5
91
80
Stroke: 2.531" (64.287 MM)

1.9995-2.0000" (50.787-50.8 MM)
Rods:
2.1245-2.1252" (53.962-53.98 MM)
Main:
Main:
Comments:
SIMCA
CHRYSLER
1.6
97
Stroke: 3.071" (78.003 MM)

1.6122-1.6128" (40.95-40.965 MM)
Rods:
2.0459-2.0463" (51.966-51.976 MM)
Main:
Main:
Comments:
OMNI, OHV, PEUGEOT * WASHERS
CHRYSLER
1.6
98
1.6
98
1.6
98
CHRYSLER
1.6
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
MMC, 2BC, SOHC
98
Thrust Width:
@ #3 *
COLT
79-80
Cyl Bore:
3.030" (76.962 MM)
Thrust Width:
1.145 @ #3
COLT
89
Cyl Bore:
3.240" (82.296 MM)
Thrust Width:
1.145 @ #3
Stroke: 3.377" (85.800 MM)

1.7310-1.7320" (43.992-44.008 MM)
Rods:
1.8894-1.8901" (47.992-48.008 MM)
Main:
Main:
Comments:
16V, SOHC
83-86
3.173" (80.594 MM)
Stroke: 2.953" (75.006 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
MMC, DOHC, TURBO, COLT
CHRYSLER
OMNI
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
31
Casting Numbers:
Comments:
SOHC, MMC, 2BC, COLT, ARROW
CHRYSLER
3.389" (86.081 MM)
Cyl Bore:
NEON
01-03
Cyl Bore:
3.0310-3.0317" (76.992-77.008 MM)
Cyl Bore:
3.030" (76.962 MM)
Thrust Width:
1.145 @ #3
83-84
67
4G32

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
1.6
98
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
MMC, 2BC
Comments:
CHRYSLER
1.6
98
CHRYSLER
1.6
98
CHRYSLER
1.6
98
1.7
1.7
105
1.7
105
1.8
3.030" (76.962 MM)
Thrust Width:
1.145 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.2402-3.2413" (82.301-82.329 MM)

1/16
1/16
1.145 @ #3
85-89
89-92
PT CRUISER
105
107
Stroke: 3.386" (86.004 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
Balance: Internal
1.731" (43.967 MM)
2.835" (72.009 MM)
Rear Seal Diameter:
10-B, 31, 31-87, 4G-3
Casting Numbers:
Comments:
MMC, SOHC, HYD LIFTERS, 4G37, COLT, LASER
4G61
02-03
3.0310-3.0317" (76.992-77.008 MM)
ALLIANCE
85-87
Cyl Bore:
3.1889-3.1902" (80.998-81.031 MM)
Thrust Width:
@ #2 *
Cyl Bore:
3.2102-3.2106" (81.539-81.549 MM)
Thrust Width:
1.629" @ #3
Cyl Bore:
3.130" (79.502 MM)
Thrust Width:
.986 @ #3
66-70
Stroke: 3.401" (86.385 MM)

1.8086-1.8094" (45.938-45.959 MM)
Rods:
2.1243-2.1248*" (53.957-53.97 MM)
Main:
Main:
049F, 851M
Casting Numbers:
Comments:
VW MADE, 2BC * .020 O/S FLG AVLBL
CHRYSLER
Cyl Bore:
Stroke: 3.252" (82.601 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
#1 2.3740-2.3745" (60.3-60.312 MM)
Main:
Main:
1881992, DAA50ZZ8, H6601861
Casting Numbers:
Comments:
H-105 HILLMAN INDUSTRIAL
CHRYSLER
1.145 @ #3
Cyl Bore:
Stroke: 3.287" (83.49 MM)

1.8897-1.8905" (47.998-48.019 MM)
Rods:
2.1568-2.1576" (54.783-54.803 MM)
Main:
Main:
499, 593
Casting Numbers:
Comments:
ALLIANCE, ENCORE, EFI * WASHERS
CHRYSLER
Thrust Width:
Stroke: 3.377" (85.800 MM)

1.7310-1.7320" (43.992-44.008 MM)
Rods:
1.8894-1.8901" (47.992-48.008 MM)
Main:
Main:
Comments:
16V, SOHC
CHRYSLER
83-86
3.030" (76.962 MM)
Stroke: 2.953" (75.006 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
3.149" (79.985 MM)
1.731" (43.967 MM)
Rear Seal Diameter:
Comments:
MMC, DOHC, 4G61, EAGLE SUMMIT
(cont.)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
31, 4G61
Casting Numbers:
Comments:
MMC, DOHC, TURBO
Engine Model
78-83
COLT
89-93
Cyl Bore:
3.1732" (80.599 MM)
Thrust Width:
1.144 @ #3
68
4G37

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
1.8
107
Stroke: 3.386" (86.004 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
10-B, 31-87, 4G-3, G52
Casting Numbers:
Comments:
CHRYSLER
1.8
93-94
Cyl Bore:
3.1732" (80.599 MM)
Thrust Width:
1.144 @ #3
110
COLT
CHRYSLER
1.8
110
4G37
CHRYSLER
2.0
120
2.0
121
1.145
COLT
122
93-94
Cyl Bore:
3.1882-3.1886" (80.98-80.99 MM)
Thrust Width:
@ #3
Cyl Bore:
3.2280" (81.991 MM)
@ #2
77-79
Cyl Bore:
3.3996-3.4057" (86.350-86.505 MM)
Rod Width:
1.102-1.111" (27.991-28.219 MM)
Thrust Width:
1.222 @ #3
3.267" (82.982 MM)

1.8894-1.8900" (47.991-48.006 MM)
4G93
87
A/J
#1 2.5181-2.5187" (63.96-63.975 MM)

Main:
Main:
064105101
Casting Numbers:
Comments:
SOHC, AUDI ENGINE
2.0
Thrust Width:
Thrust Width:
3.320" (84.328 MM)

1.8882-1.8888" (47.96-47.976 MM)
CHRYSLER
3.169" (80.493 MM)
Stroke: 3.661" (92.989 MM)

1.8897-1.8905" (47.998-48.019 MM)
Rods:
2.1568-2.1576" (54.783-54.803 MM)
Main:
Main:
Comments:
GTA, EFI, RENAULT ENGINE
CHRYSLER
92
Cyl Bore:
Stroke: 3.504" (89.002 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
1.9678-1.9685" (49.982-50. MM)
Main:
Main:
G93
Casting Numbers:
Comments:
MMC, SOHC, MECH LIFTERS, MFI, 4G93, COLT
Stroke:
Rods:
(cont.)
MMC, SOHC, HYD LIFTERS, EAGLE, COLT, LASER
Stroke: 3.390" (86.106 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
#1 2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
G37, G52
Casting Numbers:
Comments:
MMC, MECH LIFTERS, MFI, LASER, COLT VISTA
Stroke:
Rods:
COLT
Engine Model
AVENGER
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
95-04
420A
3.4446-3.4452" (87.493-87.508 MM)

.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067" (1.448-1.702 MM)
1.039 @ #3
2.0469-2.0475" (51.991-52.007 MM)

Main:
Main:
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
4556721, 4667755, 4887755, 4K05
Casting Numbers:
Comments:
DOHC, 420A, 16 V, NEON, AVENGER, SEBRING, TALON REAR FLANGE OD = 1.8878-1.8897", ID = 1.3386"
CHRYSLER
2.0
122
MMC
COLT
Stroke: 3.540" (89.916 MM)

Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
Rods:
#1 2.5976-2.5984*" (65.979-65.999 MM)
Main:
Main:
Thrust Width:
52, G52, G52, G54, G6
Casting Numbers:
Comments:
SOHC, MMC, COLT, ARROW *TO 1978; 1979-82=2.3614-2.3622
CHRYSLER
2.0
122
Stroke: 3.465" (88.011 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
59-PK, 63-GC, 65-RU, 69-GU, 80RF
Casting Numbers:
Comments:
SOHC, MMC, ARROW, COLT VISTA, D-50, RAM-50
75-88
1.144 @ #3
COLT
83-90
Cyl Bore:
3.347" (85.014 MM)
Thrust Width:
1.144 @ #3
69
4G52
3.310" (84.074 MM)
4G63B

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
4 Cylinders
2.0
122
Stroke: 3.465" (88.011 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
59-PK, 63-GC, 65-RU, 69-GU, 80RF
Casting Numbers:
Comments:
COLT
3.347" (85.014 MM)
Thrust Width:
1.144 @ #3
Engine Model
(cont.)
G63B
SOHC, MMC, COLT VISTA
CHRYSLER
2.0
122
CHRYSLER
2.0
122
COLT
Stroke: 3.465" (88.011 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
(ACM) W/E, 6-H, G6
Casting Numbers:
Comments:
DOHC, MMC, MFI, TALON, LASER
CHRYSLER
2.0
122
LASER
Thrust Width:
1.013 @ #3
NEON
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
CHRYSLER
2.0
122
Stroke: 3.268" (83.000 MM)

1.8894-1.8900" (47.992-48.008 MM)
Rods:
2.0469-2.0475" (51.992-52.008 MM)
Main:
Main:
Comments:
SOHC, HIGH PERFORMANCE
CHRYSLER
2.0
122
CHRYSLER
2.0
122
-04
3.4446-3.4452" (87.492-87.508 MM)
NEON
-04
3.4446-3.4452" (87.492-87.508 MM)
Cyl Bore:
3.267" (82.982 MM)

1.8894-1.8900" (47.991-48.006 MM)
01-02
3.4446-3.4452" (87.493-87.508 MM)
.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067" (1.448-1.702 MM)
1.039" @ #3
NEON
Cyl Bore:
Stroke: 3.268" (83.000 MM)

1.8894-1.8900" (47.992-48.008 MM)
Rods:
2.0469-2.0475" (51.992-52.008 MM)
Main:
Main:
Comments:
SOHC, SPORT HIGH PERFORMANCE, NON TURBO
93-94
3.3465-3.3476" (85.001-85.029 MM)
3.267" (82.982 MM)

1.8894-1.8900" (47.991-48.006 MM)
90-94
NEON
95-04
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.4446-3.4452" (87.493-87.508 MM)

.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067" (1.448-1.702 MM)
1.039 @ #3
Cyl Bore:
3.347" (85.014 MM)
Thrust Width:
1.144 @ #3
2.0469-2.0475" (51.991-52.007 MM)

Main:
Main:
Balance: Internal
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
4557665, 4667755, 4K05
Casting Numbers:
Comments:
SOHC, 16 VALVE, NEON, STRATUS, BREEZE REAR FLANGE OD = 1.8878-1.8897", ID = 1.3386"
CHRYSLER
2.0
Stroke: 3.465" (88.011 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
SOHC
122
MMC
83-90
70
4G63
3.3465-3.3476" (85.001-85.029 MM)

1/16
1/16
1.144 @ #3*
Cyl Bore:
2.0469-2.0475" (51.991-52.007 MM)

Main:
Main:
Balance: Internal
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
Comments:
SOHC, 16 VALVE REAR FLANGE OD=1.8878-1.8897", ID=1.3386"
Stroke:
Rods:
89-91
Cyl Bore:
Stroke: 3.465" (88.011 MM)

Cyl Bore:
1.7709-1.7715" (44.981-44.996 MM)
Rods:
Rod Fillet:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main Fillet:
Main:
Thrust Width:
1.731" (43.967 MM)
3.346" (84.988 MM)
Rear Seal Diameter:
55, 59-PK, 63-GC, 64, 65-RU, 69-GU, 80RF, EW, G6, GE
Casting Numbers:
Comments:
DOHC, MMC, MFI, EAGLE TALON * 1992 & UP: 1.013
Stroke:
Rods:
Year
4G63

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
2.0
122
Stroke: 3.268" (83.000 MM)

1.8894-1.8900" (47.992-48.008 MM)
Rods:
2.0469-2.0475" (51.992-52.008 MM)
Main:
Main:
MPI, DOHC
Comments:
CHRYSLER
2.0
PT CRUISER
TALON
Stroke: 3.465" (88.011 MM)

Cyl Bore:
1.7709-1.7715" (44.981-44.996 MM)
Rods:
Rod Fillet:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main Fillet:
Main:
Thrust Width:
1.731" (43.967 MM)
3.346" (84.988 MM)
Rear Seal Diameter:
55, 63GC, 63GU, 64, EW, G6, GE
Casting Numbers:
Comments:
DOHC, TURBO, MMC, MFI, EAGLE TALON * 1992 & UP 1.013
CHRYSLER
2.0
122
Stroke: 3.465" (88.011 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2434-2.2441" (56.982-57. MM)
Main:
Main:
1.731" (43.967 MM)
3.346" (84.988 MM)
Rear Seal Diameter:
(ACM) W/E, 63GC, 63GU, 6-H, G6
Casting Numbers:
Comments:
DOHC, TURBO, MMC, MFI, TALON
CHRYSLER
Stroke:
Rods:
2.1
126
CHRYSLER
2.2
132
CHRYSLER
2.2
134
TALON
2.2
135
Cyl Bore:
3.3858" (85.999 MM)
83-87
CHRYSLER
2.2
135
.1300"
1.1800" @ #2
MEDALLION
Cyl Bore:
Thrust Width:
86-88
3.500" (88.9 MM)
@ #3
A/J
42-71
3.125" (79.375 MM)
@ #1 *
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
3.584" (91.034 MM)
Rear Seal Diameter:
4278232, 5214490, 5214738
Casting Numbers:
Comments:
SOHC, 2BC .905 SNOUT; 6 OR 8 BLT FLG
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
3.584" (91.034 MM)
Rear Seal Diameter:
4278232, 5214490, 5214738
Casting Numbers:
Comments:
SOHC, 2BC
93-98
3.3465-3.3476" (85.001-85.029 MM)

1/16
1/16
1.013 @ #3
Stroke: 4.375" (111.125 MM)

Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.3331-2.3341" (59.261-59.286 MM)
Main:
Main:
Thrust Width:
2.302-2.312" (58.470-58.724 MM) F/P BS-3165,VICTOR
Rear Seal Diameter:
641127, 646318
Casting Numbers:
Comments:
JEEP, F HEAD, ONE VALVE IN BLOCK, L = FLATHEAD * WASHERS
CHRYSLER
90-92
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Rod Width:
1-4 2.4753-2.4761" (62.873-62.893 MM)
Main:
Main:
Thrust Width:
1.970"
3.539"
Rear Seal Diameter:
Comments:
J8S232 RENAULT DIESEL, TURBO - J8S234 INTERCOOLED
Stroke: 3.460" (87.884 MM)

2.2152-2.2160" (56.266-56.286 MM)
Rods:
2.4753-2.4761" (62.873-62.893 MM)
Main:
Main:
Comments:
EAGLE MEDALLION, RENAULT ENGINE
02-04
3.3465-3.3476" (85.001-85.029 MM)

1/16
1/16
1.144 @ #3 *
3.5030" (88.976 MM)

2.1252-2.1260" (53.98-54. MM)
(cont.)
3.4446-3.4452" (87.492-87.508 MM)
Cyl Bore:
122
Engine Model
81-82
Cyl Bore:
3.445" (87.503 MM)
Thrust Width:
1.100 @ #3
Cyl Bore:
3.465" (88.011 MM)
Thrust Width:
1.100 @ #3
82-85
71
J8S232

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
4 Cylinders
2.2
135
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
4278232, 5214490, 5214738
Casting Numbers:
Comments:
Year
83-85
Cyl Bore:
3.445" (87.503 MM)
Thrust Width:
1.100 @ #3
Cyl Bore:
3.445" (87.503 MM)
Thrust Width:
1.100 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.445" (87.503 MM)

ROLLED
ROLLED
1.100 @ #3
Cyl Bore:
3.445" (87.503 MM)
Thrust Width:
1.100 @ #3
Cyl Bore:
3.445" (87.503 MM)
Thrust Width:
1.100 @ #3
Cyl Bore:
3.445" (87.503 MM)
Thrust Width:
1.100 @ #3
SOHC, 2BBL .905 SNOUT; 6 OR 8 BLT FLG
CHRYSLER
2.2
135
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
4278232, 5214490, 5214738
Casting Numbers:
Comments:
SOHC, TBI .905 SNOUT; 6 OR 8 BLT FLG
CHRYSLER
2.2
135
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
5214738
Casting Numbers:
Comments:
SOHC, MFI, TURBO .905 SNOUT; 8 BLT FLG
CHRYSLER
2.2
135
2.2
135
2.2
135
2.2
135
86-87
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
4273232, 5214830, 5214990
Casting Numbers:
Comments:
SOHC, 2BBL .905 SNOUT; 8 BLT FLG
CHRYSLER
83-85
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
4323814, 5124990
Casting Numbers:
Comments:
SOHC, TURBO, MPI .905 SNOUT; 8 BLT FLG
CHRYSLER
83-85
Stroke: 3.622" (91.999 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
5214738
Casting Numbers:
Comments:
SOHC, 2BC .905 SNOUT; 6 OR 8 BLT FLG
CHRYSLER
83-85
86-88
86-90
Stroke: 3.622" (91.999 MM)

Cyl Bore:
1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
Thrust Width:
4448493, 5214738, 5214830, 5214990
Casting Numbers:
Comments:
SOHC, TBI, ROLLER CAMSHAFT .905 SNOUT; 8 BLT FLG
CHRYSLER
2.2
135
3.445" (87.503 MM)
1.100 @ #3
89-90
Stroke: 3.622" (91.999 MM)

Cyl Bore:
1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
Thrust Width:
4483197, 4484345, 5124738, 5214738
Casting Numbers:
Comments:
DOHC, MFI, TURBO, MASERATI HEAD 1.0035 SNOUT; 8 BLT FLG
72
3.444" (87.478 MM)
1.100 @ #3
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
2.2
135
(cont.)
90
Stroke: 3.622" (91.999 MM)

Cyl Bore:
1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
Thrust Width:
3AH, 4323814, 4448493, 4483197, 5214738, 5AK, 6AM
Casting Numbers:
Comments:
Engine Model
3.445" (87.503 MM)
1.100 @ #3
SOHC, MPI, TURBO, ROLLER CAMSHAFT .905 SNOUT; 8 BLT FLG
CHRYSLER
2.2
135
91-93
Stroke: 3.662" (93.015 MM)

Cyl Bore:
1.9677-1.9687" (49.98-50.005 MM)
Rods:
Rod Fillet:
2.3619-2.3629" (59.992-60.018 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
3.5825" (90.996 MM)
Rear Seal Diameter:
3AH, 4448493, 5214738, 5AK, 6AM
Casting Numbers:
Comments:
DOHC, TURBO III, MPFI, INTERCOOLED, LOTUS HEAD
CHRYSLER
2.2
135
91-94
Stroke: 3.622" (91.999 MM)

Cyl Bore:
1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
Thrust Width:
4448493, 5214738
Casting Numbers:
Comments:
SOHC, TBI, ROLLER CAMSHAFT 1.0035 SNOUT; 8 BLT FLG
CHRYSLER
2.2
135
3.4441-3.4456" (87.48-87.518 MM)

ROLLED
ROLLED
1.100 @ #3
3.445" (87.503 MM)
1.100 @ #3
SHELBY
86-90
3.440-3.450" (87.376-87.63 MM)

Stroke: 3.620" (91.948 MM)
Cyl Bore:
1.9677-1.9687" (49.98-50.005 MM)
.063" ROLLED (1.6 MM)
Rods:
Rod Fillet:
#1 2.3617-2.3627" (59.987-60.013 MM)
.063" ROLLED (1.600 MM)
Main:
Main Fillet:
1.101 @ #3
Main:
Thrust Width:
1.378" (35.001 MM)
3.584" (91.034 MM)
Rear Seal Diameter:
1AA, 3AH, 4323814, 4448493, 4483197, 5214738, 5214990, 5AK, 6AM
Casting Numbers:
Comments:
SOHC, TURBO, MPI, SHELBY ALL 8 BLT FLG
CHRYSLER
2.3
143
Stroke: 3.543" (89.992 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.5976-2.5984" (65.979-65.999 MM)
Main:
Main:
Comments:
4D55 TURBO DIESEL
CHRYSLER
2.3
143
2.4
CHRYSLER
2.4
CHRYSLER
2.4
1.220 @ #3
M4D55
Thrust Width:
143
143
143
84-85
90-92
3.4055-3.4067" (86.5-86.53 MM)
Thrust Width:
1.140 @ #3
COLT VISTA
93-95
Cyl Bore:
3.4055-3.4067" (86.5-86.53 MM)
Cyl Bore:
3.406" (86.512 MM)
85-86
73
M4D55
@ #3
COLT VISTA
Thrust Width:
4D55
3.5866" (91.1 MM)
Cyl Bore:
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
Comments:
SOHC, MMC, 4G64, COLT VISTA, SUMMIT WAGON
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
SOHC, EFI
Thrust Width:
Cyl Bore:
Stroke: 3.940" (100.076 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
45-T, 64
Casting Numbers:
Comments:
SOHC, MMC, D-50, COLT VISTA, EAGLE SUMMIT
83-85
3.5866" (91.1 MM)
Stroke: 3.543" (89.992 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.5976-2.5984" (65.979-65.999 MM)
Main:
Main:
Comments:
MMC, M4D55, DIESEL, TURBO
CHRYSLER
4D55
Cyl Bore:
@ #3
4G64

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
2.4
143
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
SOHC, MMC, PICKUP, RAM-50
Comments:
CHRYSLER
2.4
2.4
143
143
CHRYSLER
2.4
VAN
87-88
3.4055-3.4067" (86.5-86.53 MM)
@ #3
Thrust Width:
146
01-02
3.4055" (86.500 MM)
Cyl Bore:
3.976" (100.99 MM)

1.9670-1.9685" (49.962-50. MM)
93-95
SEBRING
(cont.)
3.4055-3.4067" (86.5-86.53 MM)
Cyl Bore:
Stroke: 3.9370" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
SOHC, EFI, VAN
Stroke:
Rods:
RAM-50
Cyl Bore:
Stroke: 3.9370" (100.000 MM)

1.7709-1.7719" (44.980-45.005 MM)
Rods:
2.2436-2.2441" (56.982-57.000 MM)
Main:
Main:
Comments:
SOHC, MMC, OHV, STRATUS COUPE
CHRYSLER
Engine Model
CARAVAN
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
96-04
3.4446-3.4452" (87.493-87.508 MM)

.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067
@ #3
2.3610-2.3625" (59.969-60.008 MM)

Main:
Main:
Balance: Internal
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
4621916
Casting Numbers:
Comments:
DOHC, MPI, 16 VALVE, CARAVAN, PT CRUISER REAR FLANGE OD 1.8878-1.8897, ID 1.3386
CHRYSLER
Stroke:
Rods:
2.4
148
3.9760" (100.99 MM)

1.9670-1.9690" (49.962-50.013 MM)
CIRRUS
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
95-05
3.4446-3.4452" (87.493-87.508 MM)

.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067
1.038-1.041 @#3
2.3619-2.3625" (59.992-60.008 MM)

Main:
Main:
Balance: Internal
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
4781590AA
Casting Numbers:
Comments:
DOHC, 16 VALVE, CIRRUS & STRATUS REAR FLANGE OD 1.8878-1.8897, ID 1.3386
CHRYSLER
Stroke:
Rods:
2.4
148
3.9760" (100.99 MM)

1.9677-1.9683" (49.98-49.995 MM)
CIRRUS
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
96-03
3.4446-3.4452" (87.493-87.508 MM)

.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067" (1.448-1.702 MM)
1.038-1.041 @#3
2.3619-2.3625" (59.992-60.008 MM)

Main:
Main:
Balance: Internal
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
916
Casting Numbers:
Comments:
DOHC,TURBO,16 VLV,SEBRING,STRATUS,SOLD IN MEXICO REAR FLANGE OD = 1.8878-1.8897", ID =
1.3386"
CHRYSLER
2.4
148
Stroke: 3.976" (101.000 MM)

1.9680-1.9685" (49.984-50.000 MM)
Rods:
2.3620-2.3625" (59.992-60.008 MM)
Main:
Main:
Comments:
DOHC, TURBO, HIGH OUTPUT, NEON
CHRYSLER
2.4
Stroke: 3.976" (101.000 mm)

1.9680-1.9685" (49.984-50.000 MM)
Rods:
2.3620-2.3625" (59.992-60.008 MM)
Main:
Main:
Comments:
DOHC, NON-TURBO, NEON
NEON
148
NEON
Cyl Bore:
74
03-04
3.4446-3.4452" (87.492-87.508 MM)
Cyl Bore:
-04
3.4446-3.4452" (87.492-87.508 MM)

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
Stroke:
Rods:
4 Cylinders
2.5
150
3.188" (80.975 MM)

2.0934-2.0955" (53.172-53.226 MM)
DAKOTA
Cyl Bore:
Rod Width:
2.4996-2.5001" (63.49-63.503 MM)
Main:
Main:
Thrust Width:
2.990" (75.946 MM)
Rear Seal Diameter:
002904, 3239611, 33002904, 4239611, 8933002904
Casting Numbers:
Comments:
2.5
150
CHRYSLER
1.070-1.076" (27.178-27.33 MM)

1.271-1.273 @ #2
84-86
Cyl Bore:
2.5
150
CHRYSLER
2.5
150
151
2.5
151
CHRYSLER
2.5
152
1.062" (26.975 MM)

1.271-1.273 @ #5
89-93
3.8751-3.8775" (98.428-98.489 MM)
Rod Width:
1.070-1.076" (27.178-27.33 MM)
Thrust Width:
1.271-1.273 @#2
81-83
4.000" (101.6 MM)
1.273 @ #5
81-83
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Thrust Width:
2.9880" (75.895 MM)
Rear Seal Diameter:
017, 381, 390, 499311, 4993111, 684, 771, 777
Casting Numbers:
Comments:
GM, PONTIAC
Stroke: 3.701" (94.000 MM)

2.1236-2.1242" (53.940-53.955 MM)
Rods:
1 2.4797-2.4803" (62.985-63.000 MM)
Main 1:
2-4 2.4805-2.4811" (63.005-63.020 MM)
Main:
Main 2:
5 2.7551-2.7559" (69.980-70.000 MM)
Main 3:
Comments:
TURBO DIESEL, JEEP CHEROKEE
3.8751-3.8775" (98.428-98.489 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Thrust Width:
2.9880" (75.895 MM)
Rear Seal Diameter:
017, 381, 499311, 4993111, 684, 684,777, 684777, 771, 777
Casting Numbers:
Comments:
GM ENGINE USED BY JEEP
CHRYSLER
1.271-1.273 @ #5
2.4996-2.5001" (63.49-63.503 MM)

Main:
Main:
2.990" (75.946 MM)
Rear Seal Diameter:
002904, 3239611, 33002904, 8933002904
Casting Numbers:
Comments:
2.46 L JEEP
2.5
1.062" (26.975 MM)
86-88
Cyl Bore:
3.188" (80.975 MM)

2.0948-2.0955" (53.208-53.226 MM)
CHRYSLER
3.8751-3.8775" (98.428-98.489 MM)
3.188" (80.975 MM)

2.0948-2.0955" (53.208-53.226 MM)
Rod Width:
2.4996-2.5001" (63.49-63.503 MM)
Main:
Main:
Thrust Width:
2.990" (75.946 MM)
Rear Seal Diameter:
002904, 3239611, 33002904, 4239611, 611, 8933002904
Casting Numbers:
Comments:
2.46 L JEEP
Stroke:
Rods:
91-02
3.8751-3.8775" (98.428-98.489 MM)
3.188" (80.975 MM)

2.0934-2.0955" (53.172-53.226 MM)
Rod Width:
2.4996-2.5001" (63.49-63.503 MM)
Main:
Main:
Thrust Width:
2.990" (75.946 MM)
Rear Seal Diameter:
002904, 3239611, 33002904, 4239611, 8933002904
Casting Numbers:
Comments:
2.46 L JEEP EAGLE
Stroke:
Rods:
(cont.)
2.46 L JEEP, DAKOTA
CHRYSLER
Stroke:
Rods:
Engine Model
VM
4.000" (101.6 MM)
1.273 @ #5
CHEROKEE
Cyl Bore:
75
97-02
3.622" (92.000 MM)
VM

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
2.5
153
Stroke: 4.090" (103.886 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
1.125" (28.575 MM)
3.584" (91.034 MM)
Rear Seal Diameter:
176H, 4448486, 486, 486178, 5214738, 6176
Casting Numbers:
Comments:
Engine Model
DAKOTA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
89-92
3.443" (87.452 MM)

1/16 ROLLED
1/16 ROLLED
1.100 @ #3
SOHC, TURBO, MPFI, CARAVAN, DAKOTA, MINI RAM VAN HEAT TREATED .010 ONLY; 8 BLT FLG; 1.0035
SNOUT
CHRYSLER
2.5
153
Stroke: 4.095" (104.013 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
1.125" (28.575 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
4273232, 4448486, 486, 5214738
Casting Numbers:
Comments:
SOHC, TBI, DAKOTA 1.0035 SNOUT; 8 BLT FLG
CHRYSLER
2.5
153
2.5
153
CHRYSLER
2.5
153
2.5
153
2.5
153
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.443" (87.452 MM)

1/16 ROLLED
1/16 ROLLED
1.100 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.4411-3.4456" (87.404-87.518 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.6 MM)
1.100 @ #3
Cyl Bore:
3.465" (88.011 MM)
Thrust Width:
1.100 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.4411-3.4456" (87.404-87.518 MM)

1/16 ROLLED
1/16 ROLLED
1.100 @ #3
86-87
87-90
91-95
Stroke: 4.252" (108.001 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
4448486
Casting Numbers:
Comments:
SOHC, MFI 1.0035 SNOUT; 8 BLT FLG
CHRYSLER
3.444" (87.478 MM)

.063" ROLLED (1.600 MM)
.063" ROLLED (1.600 MM)
1.100 @ #3
Stroke: 4.095" (104.013 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
1.125" (28.575 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
4273232, 4448486, 4448488, 486
Casting Numbers:
Comments:
SOHC, TBI
CHRYSLER
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.090" (103.886 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
1.125" (28.575 MM)
3.584" (91.034 MM)
Rear Seal Diameter:
4273232, 4448486, 4448488
Casting Numbers:
Comments:
SOHC, TBI 1.0035 SNOUT; 8 BLT FLG
92-93
Stroke: 4.095" (104.013 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
1.125" (28.575 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
4273232, 4448486, 486
Casting Numbers:
Comments:
PFI, FLEXIBLE FUEL, SOHC 1.0035 SNOUT; 8 BLT FLG
94-95
3.4411-3.4456" (87.404-87.518 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.6 MM)
1.100 @ #3
Stroke: 4.090" (103.886 MM)

1.9677-1.9687" (49.98-50.005 MM)
Rods:
2.3617-2.3627" (59.987-60.013 MM)
Main:
Main:
1.125" (28.575 MM)
3.584" (91.034 MM)
Rear Seal Diameter:
4273232
Casting Numbers:
Comments:
SOHC .865 SNOUT; 8 BLT FLG
CHRYSLER
DAKOTA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
93-95
76

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
4 Cylinders
2.6
156
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
#1 2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
CONQUEST
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
84-88
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
SOHC, MMC, EFI, TURBO, MECH VALVE TRAIN, CONQUEST T/W LENGTH: 1.219
CHRYSLER
2.6
156
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
52, 53, G52, G54
Casting Numbers:
Comments:
SOHC, MMC, 2BC COLT D-50
CHRYSLER
2.6
156
2.6
156
2.6
156
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
79-82
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G52, G54
Casting Numbers:
Comments:
SOHC, MMC, 2BC, MECH CAM
CHRYSLER
3.5875" (91.123 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.221 @ #3
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, MMC, 2BC, SOLID VALVE TRAIN
CHRYSLER
78-80
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
83-86
RAM-50
81-85
4G54
4G54
4G64
4G54
3.5875" (91.123 MM)

Stroke: 3.858" (97.993 MM)
Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
3/32
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
3/32
Main:
Main Fillet:
1.221 @ #3
Main:
Thrust Width:
3.150" (80.01 MM)
Rear Seal Diameter:
G52, G54
Casting Numbers:
Comments:
SOHC, MMC, 2BC, MECH CAM, RWD, RAM 50 THRUST WASHER LENGTH: 1.219
CHRYSLER
2.6
156
RAM-50
Stroke: 3.858" (97.993 MM)

Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
Rods:
Rod Fillet:
#1 2.3614-2.3622" (59.98-60. MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.150" (80.01 MM)
Rear Seal Diameter:
G52, G54
Casting Numbers:
Comments:
SOHC, MMC, 2BC, HYD VALVE TRAIN, RWD, RAM 50 T/W LENGTH: 1.219
CHRYSLER
CHRYSLER
85-89
3.5875" (91.123 MM)

.094" (2.388 MM)
.094
1.221 @ #3
6 Cylinders
2.5
152
Stroke: 2.9920" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
SOHC, 24 VALVE, SEBRING, AVENGER
Comments:
AVENGER
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
77
95-00
3.2874-3.2886" (83.5-83.53 MM)

.063" (1.600 MM)
.063" (1.600 MM)
.905-.906 @ #3
6G73

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
6 Cylinders
2.5
152
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
SOHC, 24 VALVE, CIRRUS
Comments:
CHRYSLER
2.7
167
Stroke: 3.0910" (78.511 MM)

2.1060-2.1067" (53.492-53.510 MM)
Rods:
2.4997-2.5004" (63.492-63.510 MM)
Main:
Main:
Comments:
DOHC, SFI, 60, 24-VALVE, INTREPID, CONCORDE
CHRYSLER
2.7
167
2.7
167
95-99
00-03
3.3859" (86.002 MM)
CONCORDE
Cyl Bore:
(cont.)
3.2874-3.2886" (83.5-83.53 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906 @ #3
CONCORDE
Cyl Bore:
Stroke: 3.0910" (78.511 MM)

2.1060-2.1067" (53.492-53.510 MM)
Rods:
2.4997-2.5004" (63.492-63.510 MM)
Main:
Main:
Comments:
DOHC, SFI, 60, 24-VALVE, INTREPID, CONCORDE
CHRYSLER
STRATUS
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
00-03
3.3859" (86.002 MM)
CONCORDE
98-04
3.3856-3.3862" (85.992-86.008 MM)

Stroke: 3.091" (78.500 MM)
Cyl Bore:
2.1060-2.1067" (53.492-53.51 MM)
Rods:
2.4997-2.5004" (63.492-63.51 MM)
Main:
3.5825" (90.995 mm)
Main:
Rear Seal Diameter:
Comments:
DOHC, SFI, 60, 24-VALVE, INTREPID, CONCORDE DAMPER BOLT SIZE 14 MM X 2.0 PITCH
CHRYSLER
2.8
170
BARRACUDA
Stroke: 3.125" (79.375 MM)

Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
#1 2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
2121654, 2263611, 2264478, 2843935, 2843939, 2843963
Casting Numbers:
Comments:
PLYMOUTH BARRACUDA, BELVEDERE, SLANT SIX
CHRYSLER
Stroke:
Rods:
2.8
173
1.2630
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
60-71
3.400" (86.36 MM)
84-87
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.6 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
#1 2.4937-2.4946" (63.34-63.363 MM)

Main:
Main:
Balance: Internal
1.252" (31.801 MM)
2.992*" (75.997 MM)
Rear Seal Diameter:
264, 504, 817
Casting Numbers:
Comments:
JEEP WITH 2.8L CHEVY ENGINE 1ST DESIGN * REAR SEAL HOUSING 3.622
CHRYSLER
3.0
181
87-95
3.5866-3.5878" (91.1-91.13 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
.059" (1.499 MM)
Rods:
Rod Fillet:
#1 2.3614-2.3622" (59.98-60. MM)
.059" (1.499 MM)
Main:
Main Fillet:
.905-.906 @ #3
Main:
Thrust Width:
Balance: Internal
1.456" (36.982 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
09N, 19N, 29, 72, 76, 79, T3A, T3B, T3D, T3E, T3F, T3L
Casting Numbers:
Comments:
MMC, SOHC, MPFI, 60
OIL PUMP GEAR DIA= 1.610 FLAT= 1.500
CHRYSLER
3.0
181
90-92
3.5866-3.5878" (91.1-91.13 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
.059" (1.499 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.059" (1.499 MM)
Main:
Main Fillet:
@ #3 *
Main:
Thrust Width:
09N, 19N, 29, 72, 76, 79, T3A, T3B, T3C, T3D, T3E, T3F, T3H, T3L, T3N, TDD
Casting Numbers:
Comments:
MMC, SOHC, MFI * WASHERS
78
6G73

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
6 Cylinders
3.0
181
(cont.)
91-92
Stroke: 2.992" (75.997 MM)

Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
Main:
Main Fillet:
Main:
Thrust Width:
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
09N, 19N, 29, 72, 76, 79, AD, T3A, T3B, T3C, T3F
Casting Numbers:
Comments:
Engine Model
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906 @ #3
MMC, DOHC, NON TURBO, 60 V6 OIL PUMP GEAR DIA 1.610, FLAT 1.500
CHRYSLER
3.0
181
91-92
3.5866-3.5878" (91.1-91.13 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
.059" (1.499 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.059" (1.499 MM)
Main:
Main Fillet:
.905-.906 @ #3
Main:
Thrust Width:
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
09N, 19N, 29, 72, 76, 79, AD, T3A, T3B, T3C, T3F
Casting Numbers:
Comments:
MMC, DOHC, TWIN TURBO, 60 V6 OIL PUMP GEAR DIA 1.610, FLAT 1.500
CHRYSLER
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
19N, T3A
Casting Numbers:
Comments:
MMC, MFI * WASHERS
CHRYSLER
3.0
181
3.0
181
3.583" (91.008 MM)
Thrust Width:
@ #3 *
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
@ #3 *
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
19N, T3A
Casting Numbers:
Comments:
MMC, MFI * WASHERS
CHRYSLER
91-92
Cyl Bore:
92
93-97
3.5866-3.5878" (91.1-91.13 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
.059" (1.499 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.059" (1.499 MM)
Main:
Main Fillet:
.905-.906 @ #3
Main:
Thrust Width:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
Comments:
MMC, DOHC, TWIN TURBO, 60 V6 OIL PUMP GEAR DIA 1.610, FLAT 1.500
OIL PUMP GEAR DIA=
1.610 FLAT= 1.500
CHRYSLER
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
#1 2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
19N, T3A, T3B, T3D, T3E, T3L
Casting Numbers:
Comments:
MMC, SOHC, MPFI, 60
CHRYSLER
3.0
181
CHRYSLER
3.0
181
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906 @ #3
Stroke: 2.992" (76.000 MM)

1.9677-1.9685" (49.980-50.000 MM)
Rods:
2.3614-2.3622" (59.980-60.000 MM)
Main:
Main:
Comments:
SOHC, MMC, 60r OHV, STRATUS COUPE
Stroke: 2.9921" (76.000 MM)

1.9677-1.9685" (49.980-50.000 MM)
Rods:
2.3614-2.3622" (59.980-60.000 MM)
Main:
Main:
Comments:
SOHC, MMC, 60 OHV, STRATUS COUPE
96-99
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
SEBRING
Cyl Bore:
SEBRING
Cyl Bore:
79
01-03
3.5866" (91.100 MM)
01-04
3.5866" (91.100 MM)

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
6 Cylinders
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
#1 2.3614-2.3622" (59.98-60. MM)
Main:
Main:
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
19N, T3A, T3B, T3C, T3E, T3F, T3H, T3N, TDD
Casting Numbers:
Comments:
STEALTH
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
SOHC, MMC, MPFI, 60, STEALTH
CHRYSLER
3.0
Engine Model
(cont.)
93-95
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906 @ #3
181
STEALTH
93-95
3.5866-3.5878" (91.1-91.13 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
.059" (1.499 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.059" (1.499 MM)
Main:
Main Fillet:
.905-.906 @ #3
Main:
Thrust Width:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
72, E1, P1, TDC
Casting Numbers:
Comments:
DOHC, MMC, NON TURBO, STEALTH OIL PUMP GEAR DIA 1.610, FLAT 1.500
CHRYSLER
3.0
184
88
3.661" (92.989 MM)

Stroke: 2.870" (72.898 MM)
Cyl Bore:
2.3611-2.3618" (59.972-59.99 MM)
Rods:
2.7576-2.7583" (70.043-70.061 MM)
Main:
Main:
Comments:
RENAULT, EAGLE PREMIER ONLY BEARINGS AVAILABLE ARE STANDARD FROM OE
CHRYSLER
3.0
184
EAGLE
89-92
3.6614-3.6618" (93.-93.01 MM)

Stroke: 2.870" (72.898 MM)
Cyl Bore:
2.3611-2.3618" (59.972-59.99 MM)
Rods:
2.7576-2.7583" (70.043-70.061 MM)
Main:
Main:
Comments:
RENAULT, EAGLE PREMIER, CHRYSLER CALLS IT VIN "U" ONLY BEARINGS AVAILABLE ARE STANDARD
FROM OE
CHRYSLER
3.0
184
AMC
RAMBLER
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.0948-2.0955" (53.208-53.226 MM)
Rods:
#1 2.4785-2.4795" (62.953-62.979 MM)
Main:
Main:
Thrust Width:
130331F, 1330331F, 3127261, 3130331F, 313033F
Casting Numbers:
Comments:
STROKE 3.750"= 172" , 4.000"= 184", 4.250 = 195"
CHRYSLER
3.1
3.2
28-32
Cyl Bore:
195
Stroke: 3.1890" (81.001 MM)

2.2830-2.2840" (57.988-58.014 MM)
Rods:
2.5190-2.5200" (63.983-64.008 MM)
Main:
Main:
Balance: Internal
3.585" (91.059 MM)
Rear Seal Diameter:
Comments:
INTREPID, CONCORDE, 24 VALVE SOHC 60
CHRYSLER
3.2
1.3130
190
Stroke: 4.1250" (104.775 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
1-4 2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
Comments:
DD ENGINE 3.125" BORE
CHRYSLER
196
49-61
3.125" (79.375 MM)
3.1250" (79.375 MM)
CONCORDE
3.6220" (91.999 MM)
Thrust Width:
.944" @ #2
Cyl Bore:
3.125" (79.375 MM)
Thrust Width:
1.2760 @ #1
A/J
Stroke: 4.250" (107.95 MM)

2.0948-2.0955" (53.208-53.226 MM)
Rods:
#1 2.4791-2.4798" (62.969-62.987 MM)
Main:
Main:
2.6300" (66.802 MM)
Rear Seal Diameter:
3124294F, 3159614F, 3169034F, 3174294
Casting Numbers:
Comments:
AMC NOS BEARINGS
98-01
Cyl Bore:
53-65
80
DD

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
6 Cylinders
3.2
198
Stroke: 3.640" (92.456 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
2.813" (71.45 MM)
Rear Seal Diameter:
2951265, 2951979, 2954265
Casting Numbers:
Comments:
Engine Model
(cont.)
74-74
Cyl Bore:
3.400" (86.36 MM)
Thrust Width:
1.263 @ #3
1BC, SLANT SIX
CHRYSLER
3.3
199
A/J
65-70
Stroke: 3.000" (76.2 MM)

Cyl Bore:
2.0948-2.0955" (53.208-53.226 MM)
Rods:
2.4996-2.5001" (63.49-63.503 MM)
Main:
Main:
Thrust Width:
2.631" (66.827 MM)
Rear Seal Diameter:
017, 3172216, 3173429, 3188945, 3208626, 381, 684, 771
Casting Numbers:
Comments:
AMC/JEEP, OHC
CHRYSLER
3.3
201
3.3
201
3.3
201
03-04
3.6610-3.6617" (92.993-93.007 MM)
CARAVAN
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
3.585" (91.059 MM)
Rear Seal Diameter:
3654
Casting Numbers:
Comments:
TOWN COUNTRY, CARAVAN, VOYAGER ETHANOL FLEXIBLEMPI
CHRYSLER
1.275 @ #3
CARAVAN
Stroke: 3.188" (81.000 MM)

Cyl Bore:
2.2827-2.2837" (57.979-58.005 MM)
Rods:
2.5194-2.5202" (63.993-64.013 MM)
Main:
Main:
Comments:
TOWN & COUNTRY, VOYAGER, ETHANOL FLEX FUEL
CHRYSLER
3.750" (95.25 MM)
98-01
3.6610-3.6617" (92.989-93.007 MM)
.944" @#2
CONCORDE
93-97
3.6610-3.6617" (92.993-93.007 MM)

Stroke: 3.189" (81.001 MM)
Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
.944" @#2
Main:
Thrust Width:
3.585" (91.059 MM)
Rear Seal Diameter:
3654, 4483654
Casting Numbers:
Comments:
MFI,OHV,60 V6, ROLLER CAM, CONCORD,INTRPID,VISION *.004-.009 IN 1996
CHRYSLER
3.3
201
OLD
Stroke: 4.375" (111.125 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.1250-2.1260*" (53.975-54. MM)
Main:
Main:
601062, 612456
Casting Numbers:
Comments:
GAS *34-41 MAINS ARE 2.249-2.2502"
CHRYSLER
3.3
201
35-43
Cyl Bore:
3.1250" (79.375 MM)
Thrust Width:
1.877 @ #4
94-97
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
3.585" (91.059 MM)
Rear Seal Diameter:
3654
Casting Numbers:
Comments:
MFI, FLEXIBLE FUEL, OHV, 60 V6, ROLLER CAM *.004-.009 IN 1996
CHRYSLER
3.3
201
3.6610-3.6617" (92.993-93.007 MM)
.944" @#2
Stroke: 3.189" (81.001 MM)

2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
3.585" (91.059 MM)
Rear Seal Diameter:
3654
Casting Numbers:
Comments:
CNG, OHV, 60 V6, ROLLER CAM *.004-.009 IN 1996
94-98
Cyl Bore:
3.6610-3.6617" (92.993-93.007 MM)
Thrust Width:
.944" @#2
81

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
6 Cylinders
3.3
201
TOWN & COUNTR
Stroke: 3.188" (81.000 MM)

Cyl Bore:
2.2827-2.2837" (57.979-58.005 MM)
Rods:
2.5194-2.5202" (63.993-64.013 MM)
Main:
Main:
SMPI, 60r V6, TOWN & COUNTRY, CARAVAN, VOYAGER
Comments:
CHRYSLER
3.3
201
CHRYSLER
Stroke:
Rods:
3.5
(cont.)
03-04
3.6610-3.6617" (92.993-93.007 MM)
TOWN & COUNTR
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
3.585" (91.059 MM)
Rear Seal Diameter:
3654, 4483654
Casting Numbers:
Comments:
MPFI, OHV,60 V6,ROLLER CAM,VOYAGER,TOWN & COUNTRY
Engine Model
90-02
3.6610-3.6617" (92.989-93.007 MM)
.944" @ #2
211
31-31
4.250" (107.950 MM)

1.8120" (46.025 MM)
Cyl Bore:
3.250" (82.550 MM)
1.375" (34.925 MM)

Rod Width:
1-4 2.2500" (57.150 MM)
Main:
Main:
Comments:
DODGE TRUCK MAIN JOURNAL WIDTH: #1=1.625", #2&3=1.250", #4=2.125"
CHRYSLER
3.5
214
Stroke: 3.189" (81.000 MM)

2.2828-2.2835" (57.982-58.002 MM)
Rods:
2.5192-2.5202" (63.987-64.013 MM)
Main:
Main:
Comments:
SOHC, 60r V-6, 24 VALVE, PACIFICA
CHRYSLER
3.5
PACIFICA
Cyl Bore:
215
02-04
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
Balance: Internal
3.585" (91.059 MM)
Rear Seal Diameter:
A1D
Casting Numbers:
Comments:
SOHC, 60r V-6, 24 VALVE, MPFI, ALUMINUM BLOCK STEEL CRANK
CHRYSLER
3.5
215
3.5
215
3.5
215
.944" @ #2
02-04
3.7797-3.7803" (96.004-96.020 MM)
.944" @ #2
02-04
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
Balance: Internal
3.585" (91.059 MM)
Rear Seal Diameter:
A1D
Casting Numbers:
Comments:
SOHC, 60r V6, 24 VALVE, MPFI, ALUMINUM BLOCK STEEL CRANK
CHRYSLER
3.7797-3.7803" (96.004-96.020 MM)
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
Balance: Internal
3.585" (91.059 MM)
Rear Seal Diameter:
A1D
Casting Numbers:
Comments:
SOHC, 60r V6, 24 VALVE, MPFI, ALUMINUM BLOCK STEEL CRANK
CHRYSLER
04-06
3.7792-3.7798" (95.992-96.008 MM)
3.7797-3.7803" (96.004-96.020 MM)
.944" @ #2
93-97
Stroke: 3.189" (81.001 MM)

Cyl Bore:
2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
Balance: Internal
3.585" (91.059 MM)
Rear Seal Diameter:
A1D, BHV, DK
Casting Numbers:
Comments:
SOHC, 24 VALVE, 60 V-6, MPFI, CAST IRON BLOCK STEEL CRANK
82
3.780" (96.012 MM)
.944" @#2

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
6 Cylinders
3.5
215
Stroke: 3.189" (81.001 MM)

2.2830-2.2840" (57.988-58.014 MM)
Rods:
#1 2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Balance: Internal
3.585" (91.059 MM)
Rear Seal Diameter:
A1D
Casting Numbers:
Comments:
Year
Engine Model
(cont.)
98-02
Cyl Bore:
3.7797-3.7803" (96.004-96.02 MM)
Thrust Width:
.944" @#2
SOHC, 60 V-6, 24 VALVE, MPFI, ALUMINUM BLOCK STEEL CRANK
CHRYSLER
3.5
218
33-56
Stroke: 4.375" (111.125 MM)

2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
2.625" (6.675 MM)
Main:
Rear Seal Diameter:
1316540, 856080, 864719, 952068
Casting Numbers:
Comments:
IND-5 GAS
CHRYSLER
3.6
Cyl Bore:
3.250" (82.55 MM)
218
65-71
3.2500" (82.55 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main 1:
2.4995-2.5005" (63.487-63.513 MM)
1.875 @ #4
Main:
Main 2:
Thrust Width:
2.4995-2.5005" (63.487-63.513 MM)
Main 3:
2.4990-2.5000" (63.475-63.5 MM)
Main 4:
2.625" (6.675 MM)
Rear Seal Diameter:
1316540, 620035, 666739, 856080, 864719, 865657, 952068, 955194
Casting Numbers:
Comments:
FLAT HEAD
CHRYSLER
3.7
225
M225
Stroke: 4.120" (104.648 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
2.8130" (71.45 MM)
Rear Seal Diameter:
Comments:
MARINE, COMMANDO, 150-155 HP
CHRYSLER
3.7
Cyl Bore:
Thrust Width:
225
Stroke: 3.5750" (90.800 MM)

2.2792-2.2798" (57.892-57.908 MM)
Rods:
2.4996-2.5005" (63.488-63.512 MM)
Main:
Main:
F75E-AE
Casting Numbers:
Comments:
SOHC, 90 12 VALVE, JEEP LIBERTY, DURANGO
CHRYSLER
3.7
225
3.410" (86.614 MM)
@ #3
02-05
Cyl Bore:
3.6616-3.6622" (92.92-93.008 MM)
60-80
3.4000" (86.36 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
@ #3 *
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
2128492, 2264479, 2268613, 2658998, 2843935, 3769307, 4095246
Casting Numbers:
Comments:
1BC, ALUMNIUM OR CAST IRON BLOCK *STEEL CRK: T/W 1.039, R/W .990, FLG RING 1.960 CAST CRK:
T/W 1.108, R/W .720, FLG RING 2.157
CHRYSLER
3.7
225
69-80
3.4000" (86.36 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
@ #3 *
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
2128492, 2264479, 2268613, 2658998, 2843935, 3698966, 3769307, 4095246, 7501366
Casting Numbers:
Comments:
2BC *STEEL CRK: T/W 1.039, R/W .990, FLG RING 1.960 CAST CRK: T/W 1.108, R/W .720, FLG RING 2.157
83

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
Year
6 Cylinders
3.7
225
Engine Model
(cont.)
76-87
3.4000" (86.36 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
1.8770
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
1557708, 1739589, 2128492, 2205554, 2264478, 2264479, 2268613, 2543935, 2658998, 2843935,
Casting Numbers:
3698966, 3769307, 4095246, 7501366
SLANT 6 CRANK MAY BE CAST R/W=.720 OR STEEL R/W=.990
Comments:
CHRYSLER
3.7
225
77-80
Stroke: 4.125" (104.775 MM)

Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
3698966, 4095246, 7501366
Casting Numbers:
Comments:
2BC *STEEL CRK:T/W 1.039,R/W .990; CAST CRK:T/W 1.108,R/W .720
CHRYSLER
3.7
225
3.7
80
Cyl Bore:
225
3.7
225
81-82
3.7
225
3.7
225
81-82
CHRYSLER
3.7
225
3.400" (86.36 MM)
@ #3 *
82
Cyl Bore:
3.400" (86.36 MM)
Cyl Bore:
3.4000" (86.36 MM)
Cyl Bore:
3.400" (86.36 MM)
Stroke: 4.125" (104.775 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
2.8130" (71.45 MM)
Main:
Rear Seal Diameter:
4095246
Casting Numbers:
Comments:
2BC
Stroke: 4.125" (104.775 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
2.8130" (71.45 MM)
Rear Seal Diameter:
4095246
Casting Numbers:
Comments:
2BC
@ #3 *
Stroke: 4.125" (104.775 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
2.8130" (71.45 MM)
Main:
Rear Seal Diameter:
4095246
Casting Numbers:
Comments:
2BC
CHRYSLER
3.4000" (86.36 MM)
Stroke: 4.125" (104.775 MM)

Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
3698966, 4095246, 7501366
Casting Numbers:
Comments:
CHRYSLER
3.4000" (86.36 MM)
Stroke: 4.125" (104.775 MM)

Cyl Bore:
2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
Thrust Width:
2.8130" (71.45 MM)
Rear Seal Diameter:
3698966, 4095246, 7501366
Casting Numbers:
Comments:
CHRYSLER
@ #3 *
Stroke: 4.125" (104.775 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
2.8130" (71.45 MM)
Main:
Rear Seal Diameter:
3751142, 4095246
Casting Numbers:
Comments:
1BC
CHRYSLER
3.400" (86.36 MM)
82
82-87
Thrust Width:
84
@ #3

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
6 Cylinders
3.7
225
Stroke: 4.125" (104.775 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
2.8130" (71.45 MM)
Rear Seal Diameter:
4095246
Casting Numbers:
Comments:
Year
Engine Model
(cont.)
83-84
3.4000" (86.36 MM)
Cyl Bore:
Thrust Width:
@ #3
1BC
CHRYSLER
3.8
230
42-52
3.250" (82.55 MM)

Stroke: 4.625" (117.475 MM)
Cyl Bore:
2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
2.625" (6.675 MM)
Main:
Rear Seal Diameter:
1185539, 1316540, 1557708, 1557708, 1739589, 620035, 6769898, 856080, 864718, 864719, 868929,
Casting Numbers:
868929
Comments:
DODGE, PLYMOUTH, FLATHEAD
CHRYSLER
3.8
231
Stroke: 3.425" (87.000 MM)

2.2827-2.2837" (57.979-58.005 MM)
Rods:
2.5194-2.5202" (63.993-64.013 MM)
Main:
Main:
Comments:
MPFI, 60r V6, ROLLER CAM
CHRYSLER
3.8
01-05
3.7792-3.7800" (95.993-96.007 MM)
Cyl Bore:
231
91-00
Stroke: 3.425" (86.995 MM)

Cyl Bore:
2.2826-2.2837" (57.978-58.006 MM)
Rods:
2.5192-2.5202" (63.988-64.013 MM)
Main:
Main:
Thrust Width:
3.585" (91.059 MM)
Rear Seal Diameter:
3690, 4556433, 6433
Casting Numbers:
Comments:
MPFI, 60 V6, ROLLER CAM, ALUMINUM HEAD * O/S FLG BRG AVLBL
CHRYSLER
3.8
232
3.7792-3.7800" (95.992-96.012 MM)
.945 @ #2
A/J
64-79
3.750" (95.25 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.0948-2.0955" (53.208-53.226 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
1.2760 @ #3
Main:
Thrust Width:
2.631" (66.827 MM)
Rear Seal Diameter:
3160035, 3169034, 3172218, 3172218R, 3188947, 3204904, 3208627, 3208794, 3214722
Casting Numbers:
Comments:
AMC VIN E, 1BC
CHRYSLER
3.9
235
A/J
NASH
Stroke: 4.375" (111.125 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.4788-2.4798" (62.962-62.987 MM)
Main:
Main:
Thrust Width:
100200, 25052, 3109607, 3125265, 3128562, 3128662F
Casting Numbers:
Comments:
RAMBLER, NASH
CHRYSLER
3.9
237
33-47
3.375" (85.725 MM)
1.8760 @ #4
42-56
3.437" (87.299 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main 1:
2.4995-2.5005" (63.487-63.513 MM)
1.8770 @ #4
Main:
Main 2:
Thrust Width:
2.4995-2.5005" (63.487-63.513 MM)
Main 3:
2.4990-2.5000" (63.475-63.5 MM)
Main 4:
665792, 666759, 864718, 865657, 870715, 873706, 954418, 955194
Casting Numbers:
Comments:
"L-HEAD" TRUCK ONLY, ALSO VIN FS & FM
CHRYSLER
3.9
237
G,GA
42-56
3.438" (87.325 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main 1:
2.4995-2.5005" (63.487-63.513 MM)
1.8770 @ #4
Main:
Main 2:
Thrust Width:
2.4995-2.5005" (63.487-63.513 MM)
Main 3:
2.4990-2.5000" (63.475-63.5 MM)
Main 4:
665792, 666759, 864718, 865657, 870715, 870744, 873706, 954418, 955194
Casting Numbers:
Comments:
TRUCK ONLY
85

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
6 Cylinders
3.9
239
Stroke: 3.313" (84.15 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Balance: Internal
2.700" (68.58 MM)
Rear Seal Diameter:
4323738, 4323769
Casting Numbers:
Comments:
MAGNUM
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
92-02
3.9098-3.9122" (99.308-99.371 MM)

1/32
1/16
1.157 @ #2
MPFI, MAGNUM, 90 V6, DODGE TRUCK, ROLLER CAM THRUST BRG LENGTH STD 1.152
CHRYSLER
3.9
239
88-91
3.910-3.912" (99.314-99.365 MM)

Stroke: 3.310" (84.074 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
1/32
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
1/32
Main:
Main Fillet:
1.157 @ #2
Main:
Thrust Width:
Balance: External
2.700" (68.58 MM)
Rear Seal Diameter:
4323769
Casting Numbers:
Comments:
TBI, OHV, 90 V6, DODGE TRUCK, ROLLER CAM THRUST BRG LENGTH STD 1.152
CHRYSLER
3.9
239
TRUCK
87-88
3.910-3.912" (99.314-99.365 MM)

Stroke: 3.310" (84.074 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
1/32
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
1/32
Main:
Main Fillet:
1.157 @ #2
Main:
Thrust Width:
Balance: External
2.700" (68.58 MM)
Rear Seal Diameter:
4323769
Casting Numbers:
Comments:
TBI, OHV, 90 V6, DODGE TRUCK, ROLLER CAM THRUST BRG LENGTH STD 1.152
CHRYSLER
4.0
241
32-41
3.375" (85.725 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.1265-2.1270" (54.013-54.026 MM)
Rods:
#1 2.4995-2.5005" (63.487-63.513 MM)
Main 1:
#4 2.4990-2.500" (63.475-63.5 MM)
1.8770 @ #4
Main:
Main 2:
Thrust Width:
1402538, 1402625, 1483338, 1671108, 1731658, 1932610, 673498, 762706, 863706, 870744
Casting Numbers:
CHRYSLER
4.0
242
Stroke: 3.441" (87.401 MM)

2.0948-2.0955" (53.208 TO 53.226 MM)
Rods:
2.4996-2.5001" (63.49 TO 63.503 MM)
Main:
Main:
2.631" (66.827 MM)
Rear Seal Diameter:
3003453
Casting Numbers:
Comments:
AMC/JEEP
CHRYSLER
4.0
242
CHRYSLER
4.0
242
3.425" (86.995 MM)

2.0935-2.0955" (53.175-53.226 MM)
1-6 2.4996-2.5001" (63.49-63.503 MM)

Main 1:
7 2.4980-2.4995" (63.449-63.487 MM)
Main:
Main 2:
2.631" (66.827 MM)
Rear Seal Diameter:
3003453, 53010411, 53020767
Casting Numbers:
Comments:
AMC/JEEP
3.8751-3.8775" (98.428 TO 98.489 MM)

1/16"
Thrust Width:
1.275 @ #3
Cyl Bore:
Rod Fillet:
3.8751-3.8775" (98.428 TO 98.489 MM)

1/16"
Thrust Width:
1.275 @ #3
Cyl Bore:
3.8751-3.8775" (98.428-98.489 MM)
Rod Width:
1.070-1.076" (27.178-27.33 MM)
Thrust Width:
1.275 @ #3
Stroke: 3.441" (87.401 MM)

2.0948-2.0955" (53.208 TO 53.226 MM)
Rods:
2.4996-2.5001" (63.49 TO 63.503 MM)
Main:
Main:
2.631" (66.827 MM)
Rear Seal Diameter:
3003453
Casting Numbers:
Comments:
AMC/JEEP, MFI
Stroke:
Rods:
87-88
Cyl Bore:
Rod Fillet:
89-90
91-97
86

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
Stroke:
Rods:
6 Cylinders
4.0
242
3.4250" (86.995 MM)

2.0934-2.0955" (53.175-53.226 MM)
1-6 2.4996-2.5001" (63.49-63.503 MM)

Main 1:
7 2.4980-2.4995" (63.449-63.487 MM)
Main 2:
2.631" (66.827 MM)
Rear Seal Diameter:
53010411, 53020767
Casting Numbers:
Comments:
CHRYSLER
CHRYSLER
98-05
3.8759-3.8775" (98.448-98.489 MM)
Rod Width:
1.070-1.076" (27.178-27.33 MM)
Thrust Width:
1.2710-1.2750" (32.283-32.385 MM) @ #3
4.0
243
Cyl Bore:
3.6200-3.6213" (91.948-91.981 MM)
Thrust Width:
@ #7
4.1
81-85
251
42-68
CHRYSLER
4.2
258
CHRYSLER
4.2
258
3.895" (98.933 MM)

2.0948-2.0955" (53.208-53.226 MM)
CHRYSLER
4.2
258
2.4996-2.5001" (63.49-63.503 MM)

Main:
Main:
Balance: Internal
2.630" (66.802 MM)
Rear Seal Diameter:
3199738C, 3214723, 3235477, 3727, RD67703
Casting Numbers:
Comments:
AMC/JEEP EAGLE THRUST BRG LENGTH STD 1.2700
CHRYSLER
4.2
3.895" (98.933 MM)

2.0948-2.0955" (53.208-53.226 MM)
2.4996-2.5001" (63.49-63.503 MM)

Main:
Main:
2.630" (66.802 MM)
Rear Seal Diameter:
3235477, 3237, 3727
Casting Numbers:
Comments:
AMC/JEEP
258
3.750" (95.25 MM)

.078" (1.981 MM)
.078" (1.981 MM)
1.2760 @ #3
83-89
3.750" (95.25 MM)
.078" (1.981 MM)
1.063" (27. MM)
.078" (1.981 MM)
1.2760 @ #3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.750" (95.25 MM)

.078" (1.981 MM)
1.063" (27. MM)
.078" (1.981 MM)
1.2760 @ #3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.750" (95.25 MM)

5/64
1.063" (27. MM)
5/64
1.2760 @ #3
C(2
3.895" (98.933 MM)

2.0948-2.0955" (53.208-53.226 MM)
1.8770
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.4996-2.5001" (63.49-63.503 MM)

Main:
Main:
Balance: Internal
2.630" (66.802 MM)
Rear Seal Diameter:
3199738C, 3214723, 3235477, 3727, 3727, RD67703
Casting Numbers:
Comments:
AMC/JEEP EAGLE THRUST BRG LENGTH STD 1.2700"
83-89
90
87
M7, M17 & M27
3.4370-3.4380" (87.3-87.325 MM)
70-83
Stroke: 3.895" (98.933 MM)

Cyl Bore:
2.0948-2.0955" (53.208-53.226 MM)
Rods:
Rod Fillet:
2.4996-2.5001" (63.49-63.503 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.630" (66.802 MM)
Rear Seal Diameter:
3199738C, 3199798, 3214723, 3235477, RD67703
Casting Numbers:
Comments:
AMC/JEEP
Stroke:
Rods:
(cont.)
Cyl Bore:
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main 1:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main 2:
Thrust Width:
2.4995-2.5005" (63.487-63.513 MM)
Main 3:
2.4990-2.5000" (63.475-63.5 MM)
Main 4:
673498, 762706, 863706, 864718, 870715, 870744
Casting Numbers:
Comments:
INDUSTRIAL/MARINE, M7, M17, M27 ENGINES
Stroke:
Rods:
Engine Model
AMC/JEEP CHEROKEE, WRANGLER
Stroke: 3.937" (100. MM)

2.2810-2.2820" (57.937-57.963 MM)
Rods:
2.7540-2.7550" (69.952-69.977 MM)
Main:
Main:
Comments:
NISSAN DIESEL ENGINE
Stroke:
Rods:
Year

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
Year
6 Cylinders
4.3
265
52-68
Engine Model
(cont.)
IND 32 + 33
3.4375" (87.313 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
#1 2.4995-2.5005" (63.487-63.513 MM)
.078" (1.981 MM)
Main:
Main Fillet:
1.875 @ #4
Main:
Thrust Width:
1400188, 1400244, 1400718, 1402538, 1402625, 1483338, 1671108, 1731658, 1932610
Casting Numbers:
CHRYSLER
4.6
282
37-52
Stroke: 4.250" (107.95 MM)

2.3115-2.3125" (58.712-58.738 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
1122297, 1122298
Casting Numbers:
CHRYSLER
5.9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
359
00-01
Stroke: 4.7244" (120.000 MM)

Cyl Bore:
2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
Comments:
CUMMINS B-SERIES, H.O. 24 VALVE TURBO DIESEL
CHRYSLER
5.9
359
5.9
359
CHRYSLER
5.9
359
5.9
359
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.0157-4.0173" (101.999-102.039 MM)

.1567-.1583" (3.98-4.021 MM)
1.6732-1.6748
1.4764 @ #6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.0157-4.0173" (101.999-102.039 MM)

.1567-.1583" (3.98-4.021 MM)
1.6732-1.6748
1.4764 @ #6
94-96
97-98
98-05
Stroke: 4.7244" (120. MM)

Cyl Bore:
2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
Comments:
CUMMINS B-SERIES, 24 VALVE 305, 250, 235, 215 HP
CHRYSLER
5.9
359
CHRYSLER
B-SERIES
B-SERIES
98-05
B-SERIES
4.0157-4.0173" (101.999-102.039 MM)
Cyl Bore:
CHRYSLER
Stroke:
Rods:
B-SERIES
4.0157-4.0173" (101.999-102.039 MM)
Stroke: 4.7244" (120.000 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
Comments:
CUMMINS B, 24 VALVE 325, 305, 250, 235, 215 HP
B SERIES
4.0157-4.0173" (101.999-102.039 MM)

.1567-.1583" (3.98-4.021 MM)
1.6732-1.6748
1.4764 @ #6
Stroke: 4.724" (119.99 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
3907804
Casting Numbers:
Comments:
CUMMINS B-SERIES, 12 VALVE, TURBO DIESEL
CHRYSLER
89-97
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.724" (119.99 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
3907804
Casting Numbers:
Comments:
CUMMINS B-SERIES, 12 VALVE, TURBO DIESEL
B-SERIES
4.0157-4.0173" (101.999-102.039 MM)
Stroke: 4.724" (119.99 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
3907804
Casting Numbers:
Comments:
CUMMINS B-SERIES, TURBO DIESEL
CHRYSLER
3.750" (95.25 MM)

.125" (3.175 MM)
.125
3.2530 @ #4
8 Cylinders
4.0
3.2500" (82.55 MM)

1.9365-1.9375" (49.187-49.213 MM)
2.3745-2.3755" (60.312-60.338 MM)

Main:
Main:
TRUCK
Comments:
241
HEMI
HEMI
53-55
Cyl Bore:
3.43725-3.43975" (87.306-87.37 MM)
Rod Width:
1.8125" (46.038 MM)
Thrust Width:
88
@#3

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
4.1
250
A/J
Stroke: 3.250" (82.55 MM)

2.2483-2.2490" (57.107-57.125 MM)
Rods:
2.4988-2.4995" (63.47-63.487 MM)
Main:
Main:
3144388
Casting Numbers:
Comments:
(cont.)
56-61
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.2760 @ #1
SERIES 20
MARINE ALSO, SAME FAMILY AS AMC 327
CHRYSLER
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Engine Model
4.4
270
BELVEDERE
3.250" (82.55 MM)

1.9365-1.9375" (49.187-49.213 MM)
2.3745-2.3755" (60.312-60.338 MM)
2.3745-2.3755" (60.312-60.338 MM)
2.3745-2.3755" (60.312-60.338 MM)
2.4990-2.5000" (63.475-63.5 MM)
2.3745-2.3755" (60.312-60.338 MM)
55-56
Cyl Bore:
3.625" (92.075 MM)
Thrust Width:
1.0950 @ #3
2.6900" (68.326 MM)

Rear Seal Diameter:
1402538, 1402625, 1483338, 1671108, 1731658, 1932610
Casting Numbers:
Comments:
DODGE, PLYMOUTH, HEMI, SUPER RED RAM
CHRYSLER
4.5
273
M273
Stroke: 3.310" (84.074 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Comments:
MARINE, COMMANDO, 175-200 HP
CHRYSLER
4.5
Cyl Bore:
3.630" (92.202 MM)
@ #3
Thrust Width:
273
273
62-69
3.625" (92.075 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
#1 2.4995-2.5005" (63.487-63.513 MM)
Main:
1.1580 @ #3
Main:
Thrust Width:
2.6900" (68.326 MM)
Rear Seal Diameter:
1626123, 1632077, 1732610, 1826123, 1826129, 2128278, 2128869, 2205700, 2205702, 2264182,
Casting Numbers:
2532457, 2558393, 2658268, 2658278, 2658393, 2843868, 3462387, 3482387, 3751841, 3751887
Comments:
CAR
CHRYSLER
4.5
277
BELVEDERE
Stroke: 3.125" (79.375 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Thrust Width:
2.6900" (68.326 MM)
Rear Seal Diameter:
1630937, 1650270, 1732557
Casting Numbers:
Comments:
PLYMOUTH PLAZA SAVOY BELVEDERE, SAME AS 241.3 ENG
CHRYSLER
4.7
287
Stroke: 3.400" (86.360 MM)

2.0076-2.0082" (50.993-51.008 MM)
Rods:
2.4996-2.5005" (63.490-63.513 MM)
Main:
Main:
Balance: Internal
53020683
Casting Numbers:
Comments:
90r SOHC, 16 VALVE
CHRYSLER
4.7
287
Stroke: 3.400" (86.36 MM)

2.0076-2.0082" (50.993-51.008 MM)
Rods:
2.4996-2.5005" (63.49-63.513 MM)
Main:
Main:
53020683
Casting Numbers:
Comments:
90 SOHC, 16 VALVE, DAKOTA, G CHEROKEE & HO
CHRYSLER
4.7
Stroke: 3.250" (82.55 MM)

2.2483-2.2490" (57.107-57.125 MM)
Rods:
2.4988-2.4995" (63.47-63.487 MM)
Main:
Main:
2.8810" (73.177 MM)
Rear Seal Diameter:
3144388
Casting Numbers:
Comments:
AMC/JEEP
287
1.1580 @ #3
DAKOTA
Cyl Bore:
56-57
3.7500" (95.25 MM)
04-06
3.6616-3.6622" (93.005-93.020 MM)
DURANGO
99-06
Cyl Bore:
3.6616-3.6622" (93.005-93.02 MM)
Cyl Bore:
3.750" (95.25 MM)
Thrust Width:
1.2760 @ #1
A/J
63-66
89

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
4.8
290
A/J
Stroke: 3.281" (83.337 MM)

2.0948-2.0955" (53.208-53.226 MM)
Rods:
2.7474-2.7489" (69.784-69.822 MM)
Main:
Main:
2.881" (73.177 MM)
Rear Seal Diameter:
1409624
Casting Numbers:
Comments:
(cont.)
66-69
Cyl Bore:
3.750" (95.25 MM)
Thrust Width:
1.276 @ #3
Cyl Bore:
3.625" (92.075 MM)
AMC ENGINE /JEEP
CHRYSLER
Stroke:
Rods:
Main:
Main:
Engine Model
4.9
301
301
3.625" (92.075 MM)

2.2490-2.2500" (57.125-57.15 MM)
2.4990-2.5000" (63.475-63.5 MM)
55
@ #5
Thrust Width:
CHRYSLER
5.0
303
FURY
56-58
3.8125" (96.838 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
1.1580 @ #3
Main:
Thrust Width:
2.6900" (68.326 MM)
Rear Seal Diameter:
1626123, 1632077, 1732559, 1732610, 1826123, 1826129, 2128869, 2205700, 2205702, 2264182,
Casting Numbers:
2532457, 2558393, 2658268, 2658278, 2658393, 2843868, 3462387, 3482387, 3751841
Comments:
PLYMOUTH FURY, CANADIAN
CHRYSLER
Stroke:
Rods:
5.0
304
A/J
3.438" (87.325 MM)

2.0948-2.0955" (53.208-53.226 MM)
70-79
Cyl Bore:
Rod Fillet:
Rod Width:
3.750" (95.25 MM)

7/64
1.998-2.004" (50.749-50.902 MM)
2.7484-2.7489" (69.809-69.822 MM)

Main:
1.2760 @ #3
Main:
Thrust Width:
2.881" (73.177 MM)
Rear Seal Diameter:
3159292, 3195292, 3213754, 3214724, 4487237, RD51261, RDJ1261
Casting Numbers:
Comments:
AMC ENGINE /JEEP VIN H REAR CENTERING FLANGE 2.690"
CHRYSLER
5.1
313
57-66
3.875" (98.425 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
1.1580 @ #3
Main:
Thrust Width:
2.6900" (68.326 MM)
Rear Seal Diameter:
1626123, 1632077, 1732559, 1732610, 1826123, 1826129, 2128869, 2205700, 2205702, 2264182,
Casting Numbers:
2462387, 2532457, 2558393, 2658268, 2658278, 2658393, 2843868, 3482387, 3751841
CHRYSLER
5.2
315
315
55-57
Stroke: 3.800" (96.52 MM)

Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Thrust Width:
1630932, 1635690, 1635785, 1730432, 1736044, 1739538
Casting Numbers:
Comments:
DODGE HEMI
CHRYSLER
5.2
318
3.625" (92.075 MM)
1.580 @ #3
DAKOTA
88-91
3.910-3.912" (99.314-99.365 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
Comments:
ROLLER CAM, DAKOTA
CHRYSLER
5.2
318
DAKOTA
92-04
3.9100-3.9120" (99.314-99.365 MM)

Stroke: 3.310" (84.074 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2264182, 2532457, 2658278, 2658393, 2991345, 3462387, 375184, 3751841,
Casting Numbers:
3751887, 375841
Comments:
MAGNUM, MPFI, ROLLER CAM, DAKOTA, DURANGO
90

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
5.2
318
Stroke: 3.310" (84.074 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
375184
Casting Numbers:
Comments:
MAGNUM
Engine Model
(cont.)
95-99
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.9100-3.9120" (99.314-99.365 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
3.910" (99.314 MM)
CNG, MAGNUM
CHRYSLER
5.2
318
LM318
Stroke: 3.310" (84.074 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
2.690" (68.326 MM)
Rear Seal Diameter:
Comments:
MARINE, COMMANDO
CHRYSLER
5.2
Thrust Width:
318
62-67
Stroke: 3.313" (84.15 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2206159, 246747, 2656278, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
POLYSPHERICAL, SINGLE ROCKER ARM SHAFT
CHRYSLER
5.2
318
@ #3
POLYSPHERIC
3.910-3.912" (99.314-99.364 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
69-76
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
Comments:
MARINE ALSO
CHRYSLER
Stroke:
Rods:
5.2
318
3.313" (84.15 MM)

2.1240-2.1250" (53.95-53.975 MM)
73-76
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.4995-2.5005" (63.487-63.513 MM)

Main:
Main:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2206159, 246747, 2656278, 3462923, 3751877, 4027172
Casting Numbers:
CHRYSLER
5.2
318
3.910-3.192" (99.314-81.077 MM)

.047" (1.194 MM)
1.878" (47.701 MM)
.047" (1.194 MM)
1.156 @ #3
77-79
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658393, 2991345, 3462387,
Casting Numbers:
3462923, 3751874, 3751877, 3751887, 4027172
CHRYSLER
5.2
318
77-80
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
3/64
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
3/64
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
91

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
Year
8 Cylinders
5.2
318
Engine Model
(cont.)
78-80
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
CHRYSLER
5.2
318
80
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128869, 2206159, 246747, 2532457, 2656278, 3462923, 3751877, 4027172
Casting Numbers:
CHRYSLER
5.2
318
81-82
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
CHRYSLER
5.2
318
81-82
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
CHRYSLER
5.2
318
81-82
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128869, 2206159, 246747, 2532457, 2656278, 2658393, 3462387, 3462923, 3751841, 3751877, 4027172
Casting Numbers:
CHRYSLER
5.2
318
81-82
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128869, 2206159, 246747, 2532457, 2656278, 2658393, 3462387, 3462923, 3751841, 3751877, 4027172
Casting Numbers:
CHRYSLER
5.2
318
81-82
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
92

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
Year
Engine Model
8 Cylinders
5.2
318
(cont.)
81-82
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
CHRYSLER
5.2
318
81-85
Stroke: 3.310" (84.074 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2206159, 246747, 2656278, 3462923, 3751841, 3751877, 4027172
Casting Numbers:
CHRYSLER
5.2
318
3.910" (99.314 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
83-84
3.910-3.192" (99.314-81.077 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
CHRYSLER
5.2
318
83-87
Stroke: 3.310" (84.074 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2206159, 246747, 2656278, 3462923, 3751877, 4027172
Casting Numbers:
CHRYSLER
5.2
318
83-87
Stroke: 3.310" (84.074 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2206159, 246747, 2656278, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
OHV, 2BC
CHRYSLER
5.2
318
3.910-3.912" (99.314-99.365 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
3.910" (99.314 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
83-89
3.910" (99.314 MM)

Stroke: 3.310" (84.074 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2268119, 2465747, 2658278, 2658393, 3462387, 3751841
Casting Numbers:
Comments:
2BC, ROLLER CAM
CHRYSLER
5.2
318
83-89
3.910" (99.314 MM)

Stroke: 3.310" (84.074 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
.047" (1.194 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
.047" (1.194 MM)
Main:
Main Fillet:
1.156 @ #3
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2128278, 2128869, 2206159, 2264182, 246747, 2532457, 2656278, 2658278, 2658393, 2991345,
Casting Numbers:
3462387, 3462923, 3751841, 3751877, 3751887, 4027172
Comments:
HIGH PERFORMANCE, 4BC
93

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
5.2
318
(cont.)
83-91
Stroke: 3.310" (84.074 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2206159, 246747, 2656278, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
Engine Model
3.910-3.912" (99.314-99.365 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
ROLLER CAM
CHRYSLER
5.2
318
Stroke: 3.310" (84.074 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Balance: Internal
2.690" (68.326 MM)
Rear Seal Diameter:
2658393, 3462387, 375184, 3751841, 375841
Casting Numbers:
Comments:
LPG
CHRYSLER
5.2
320
5.3
323
5.3
325
Cyl Bore:
3.813" (96.85 MM)
Thrust Width:
2.0630 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.250" (82.55 MM)

.125" (3.175 MM)
.125
2.0960
55
323
Stroke: 4.875" (123.825 MM)

2.1865-2.1875" (55.537-55.563 MM)
Rods:
2.7035" (68.669 MM)
Main:
Main:
855153
Casting Numbers:
Comments:
INDUSTRIAL STRAIGHT 8
CHRYSLER
3.9100-3.9120" (99.314-99.365 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
A/J
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
300102, 3105305
Casting Numbers:
Comments:
AMC/JEEP
CHRYSLER
98-99
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
35-51
325
55-57
Stroke: 3.800" (96.52 MM)

Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
1630432, 1635690, 1635785, 1639538, 173604, 1739538
Casting Numbers:
Comments:
DODGE ROYALE RED RAM, SINGLE ROCKER ARM SHAFT
CHRYSLER
5.3
HEMI
3.6875" (93.663 MM)
326
55-57
3.950" (100.33 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
1.1580 @ #3
Main:
Thrust Width:
2.6900" (68.326 MM)
Rear Seal Diameter:
1626123, 1632077, 1732559, 1826123, 1826129, 2128869, 2205700, 2205702, 2264182, 2532457,
Casting Numbers:
2558393, 2658268, 2658278, 2658393, 2843686, 3462387, 3482387, 3751841, 4732610
Comments:
DODGE TRUCK
CHRYSLER
5.4
327
A/J
Stroke: 3.2500" (82.550 MM)

2.2483-2.2490" (57.107-57.125 MM)
Rods:
2.4983-2.4990" (63.456-63.474 MM)
Main:
Main:
2.690" (68.326 MM)
Rear Seal Diameter:
3144388
Casting Numbers:
Comments:
RAMBLER, JEEP
CHRYSLER
5.4
Stroke: 3.8125" (96.838 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
1630432, 1635785
Casting Numbers:
Comments:
DESOTO, S24 ENGINE
330
RAMBLER
57-67
Cyl Bore:
3.9500" (100.33 MM)
Thrust Width:
1.1580 @ #3
330
DESOTO
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
94
56
3.7188" (94.458 MM)

.125" (3.175 MM)
.125
1.095 @ #5
SERIES 80
S24

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
5.4
331
CAR
Engine Model
(cont.)
51-54
3.8125" (96.838 MM)

Stroke: 3.625" (92.075 MM)
Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
@ #5
Main:
Thrust Width:
2.690" (68.326 MM)
Rear Seal Diameter:
1323335, 1335001, 1409421, 1419421, 1523335, 1619421, 1619647
Casting Numbers:
Comments:
CAR
CHRYSLER
5.4
331
331
54-56
3.8125" (96.838 MM)

Stroke: 3.625" (92.075 MM)
Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
@ #5
Main:
Thrust Width:
2.690" (68.326 MM)
Rear Seal Diameter:
1323335, 1335001, 1409421, 1419421, 1523335, 1619421, 1619647
Casting Numbers:
Comments:
TRUCK
CHRYSLER
5.6
340
LM340
Stroke: 3.310" (84.074 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
2.690" (68.326 MM)
Rear Seal Diameter:
Comments:
MARINE, COMMANDO
CHRYSLER
5.6
Cyl Bore:
4.040" (102.616 MM)
@ #3
Thrust Width:
340
68-73
4.040" (102.616 MM)

Stroke: 3.313" (84.15 MM)
Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
1.155 @ #3
Main:
Thrust Width:
2.690" (68.326 MM)
1616123, 1632077, 1732559, 1732610, 1826123, 1826129, 18266129, 2128278, 2128869, 2205700,
Casting Numbers:
2205702, 2264182, 2532457, 2558393, 2658268, 2658278, 2658393, 2843868, 3462387, 3482387,
3751841, 3751887
Comments:
CHRYSLER * 1968-72 CRANKS ARE STEEL AND INTERNAL BALANCE 1973 CRANKS ARE CAST AND
EXTERNAL BALANCE
CHRYSLER
5.6
341
A/J 2
DESOTO
Stroke: 3.313" (84.15 MM)

Cyl Bore:
2.1240-2.1250" (53.95-53.975 MM)
Rods:
#1 2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
Thrust Width:
2.6900" (68.326 MM)
Rear Seal Diameter:
1630432, 1635690, 1635785, 1735785, 1736044, 1739538
Casting Numbers:
Comments:
BLOCK SAME AS 330 CID
CHRYSLER
5.6
343
CHRYSLER
5.7
HEMI
1.1580 @ #3
A/J 1
Stroke: 3.280" (83.312 MM)

2.0948-2.0955" (53.208-53.226 MM)
Rods:
#1 2.7484-2.7489" (69.809-69.822 MM)
Main:
Main:
2.8810" (73.177 MM)
Rear Seal Diameter:
3178451, 3178451C, 3178461, 3193816
Casting Numbers:
Comments:
AMC/JEEP 235 & 280 HP
56-57
4.040" (102.616 MM)
67-69
Cyl Bore:
4.080" (103.632 MM)
Thrust Width:
1.2760 @ #3
345
DESOTO
Stroke: 3.800" (96.52 MM)

Cyl Bore:
2.2490-2.2500" (57.125-57.150 mm)
Rods:
2.4995-2.5005" (63.487-63.528 mm)
Main:
Main:
1736044
Casting Numbers:
Comments:
HEMI, DESOTO ADVENTURER, MODEL S26A, HI DECK BLOCK
95
-57
3.800" (96.52 MM)
HEMI

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
Stroke:
Rods:
8 Cylinders
5.7
345
3.580" (90.900 MM)

2.1250-2.1260" (53.992-54.008 MM)
2.5585-2.5595" (64.988-65.012 MM)

Main:
Main:
3.9370" (99.999 MM) *
Rear Seal Diameter:
53021300AA
Casting Numbers:
Comments:
TRUCK
Engine Model
(cont.)
03-05
HEMI
Cyl Bore:
3.917" (99.500 MM)
Rod Width:
1.8775-1.8780" (47.688-47.701 MM) *
Thrust Width:
1.1565" (29.375 MM) *
HEMI, 90r V-8, OHV * REPORTED MEMBER # 3563 12-03-04 MC
CHRYSLER
5.7
350
68-71
Stroke: 3.850" (97.79 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
Thrust Width:
Balance: Internal
2.6560" (67.462 MM)
Rear Seal Diameter:
0, 0, 0, 0, 0, 0, 0, 0, 1235419, 137580, 1375809, 1378346
Casting Numbers:
Comments:
JEEP, BUICK ENGINE
CHRYSLER
5.8
354
3.800" (96.52 MM)
1.0640 @#4
CHRYSLER 300B
56-56
C300B
3.9375" (100.013 MM)

Stroke: 3.625" (92.075 MM)
Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
1/8
Rods:
Rod Fillet:
2.4995-2.5005" (63.487-63.513 MM)
1/8
Main:
Main Fillet:
1.580
Main:
Thrust Width:
1323335, 1335001, 1409421, 1419421, 1523335, 1617184, 1619421, 1619467, 1619647, 1635690
Casting Numbers:
Comments:
HEMI, D500 MS45SP3, C300B
CHRYSLER
5.8
354
NEW YORKER
Stroke: 3.6250" (92.075 MM)

2.2490-2.2500"
Rods:
2.4990-2.5000"
Main:
Main:
Comments:
ENGINES C70 & C73 ALSO
CHRYSLER
5.8
5.9
CHRYSLER
5.9
Cyl Bore:
3.9375" (100.013 MM)
56-58
360
Stroke: 3.5800" (90.932 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
2.690" (68.326 MM)
Rear Seal Diameter:
3418640, 4027169
Casting Numbers:
Comments:
MAGNUM, TBI & MPFI, ROLLER CAM, DURANGO
Stroke:
Rods:
3.9375" (100.012 MM)
354
Stroke: 3.625" (92.075 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4995-2.5005" (63.487-63.513 MM)
Main:
Main:
1419421
Casting Numbers:
Comments:
HEMI, TRUCK, IND-56 A
CHRYSLER
360
56-56
Cyl Bore:
DURANGO
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.440" (87.376 MM)

2.0934-2.0955" (53.172-53.226 MM)
C72
HEMI
98-02
4.0000-4.0020" (101.6-101.651 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
GRAND WAGONE
89-91
Cyl Bore:
4.080" (103.632 MM)
Rod Width:
.995" (25.273 MM)
2.7474-2.7489" (69.784-69.822 MM)

Main:
Main:
Balance: External
2.881" (73.177 MM)
Rear Seal Diameter:
3213754, 3214724, 34118640
Casting Numbers:
Comments:
AMC ENGINE /JEEP, GRAND WAGONEER, 2BC
CHRYSLER
5.9
360
Stroke: 3.580" (90.932 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.9105" (71.361-73.927 MM)
Main:
Main:
2.690" (68.326 MM)
Rear Seal Diameter:
3418640, 4027169
Casting Numbers:
Comments:
MAGNUM, TBI & MPFI, ROLLER CAM
MAGNUM
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
96
92-01
4.0000-4.0020" (101.6-101.651 MM)

3/64
3/64
1.156 @ #3

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
5.9
360
Stroke: 3.580" (90.932 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.9105" (71.361-73.927 MM)
Main:
Main:
Balance: External
2.690" (68.326 MM)
Rear Seal Diameter:
3418640, 4027169
Casting Numbers:
Comments:
(cont.)
92-97
4.0000-4.0020" (101.6-101.651 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
MAGNUM, TBI & MPFI, ROLLER CAM *1996-97 = 2.8095-2.8105
CHRYSLER
Stroke:
Rods:
MAGNUM
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
5.9
360
A/J
3.438" (87.325 MM)

2.0934-2.0955" (53.172-53.226 MM)
70-79
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.078" (103.581 MM)

7/64
1.998-2.004" (50.749-50.902 MM)
7/64
1.274 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
#1-4 2.7474-2.7489" (69.784-69.822 MM)

Main 1:
#5 2.7464-2.7479" (69.759-69.797 MM)
Main:
Main 2:
Balance: External
2.881" (73.177 MM)
Rear Seal Diameter:
3195292, 3213754, 32138754, 3214724, 4487237, RD51261, RDJ1261
Casting Numbers:
Comments:
AMC ENGINE /JEEP, VIN N & P REAR CENTERING FLANGE 2.690
CHRYSLER
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
5.9
360
5.9
360
CHRYSLER
5.9
360
74-76
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
73-75
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
71-75
76-78
76-79
97

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
8 Cylinders
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Comments:
Year
Engine Model
(cont.)
77-79
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000-4.002" (101.6-101.651 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
CAR/TRUCK
CHRYSLER
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
5.9
360
5.9
360
5.9
360
CHRYSLER
5.9
360
80
Stroke: 3.580" (90.932 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
79
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Comments:
TRUCK
CHRYSLER
77-79
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
77-79
80
80
98

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
8 Cylinders
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
5.9
360
5.9
360
CHRYSLER
5.9
360
CHRYSLER
5.9
360
5.9
360
CHRYSLER
5.9
3.440" (87.376 MM)

2.0933-2.0955" (53.17-53.226 MM)
#1-4 2.7474-2.7489" (69.784-69.822 MM)

Main 1:
#5 2.7464-2.7479" (69.759-69.797 MM)
Main:
Main 2:
2.881" (73.177 MM)
Rear Seal Diameter:
3213754, 3214724
Casting Numbers:
Comments:
AMC/JEEP, 2BC
360
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000-4.002" (101.6-101.651 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
4.080" (103.632 MM)
Rod Width:
.995" (25.273 MM)
80-82
81
81-82
82
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Stroke:
Rods:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
80-82
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
(cont.)
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
CHRYSLER
Year
83-87
83-88
Thrust Width:
99
@ #3

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Comments:
Engine Model
(cont.)
83-88
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.156 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047.047" (1.194 MM)
1.156 @ #3
OHV, CARB
CHRYSLER
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.9105" (71.361-73.927 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Comments:
TBI, ROLLER CAM
CHRYSLER
5.9
360
Stroke: 3.578" (90.881 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.8095-2.8105" (71.361-71.387 MM)
Main:
Main:
Balance: External
2.965" (75.311 MM)
Rear Seal Diameter:
3418640, 3418840, 3418995, 4027169
Casting Numbers:
Comments:
ROLLER CAM
CHRYSLER
5.9
361
89-91
89-91
TRK
57-78
4.125" (104.775 MM)

Stroke: 3.375" (85.725 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.6245-2.6255" (66.662-66.688 MM)
Main:
1.2300
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1737641, 1737642, 1851527, 2203155, 2206157, 2206159, 2206160, 2482923, 3462923, 3751877,
Casting Numbers:
4027172, R851729
Comments:
"B" LO BLOCK, SHORT DECK HEIGHT, SMALL MAINS
CHRYSLER
5.9
361
80-81
4.125" (104.775 MM)

Stroke: 3.375" (85.725 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.6245-2.6255" (66.662-66.688 MM)
Main:
1.2300 @ #3
Main:
Thrust Width:
2.9640" (75.286 MM)
Rear Seal Diameter:
1737641, 1737642, 1851527, 2203155, 2206157, 2206159, 2206160, 2482923, 3462923, 3751877,
Casting Numbers:
4027172
Comments:
TRUCK
CHRYSLER
6.1
370
Stroke: 3.5787" (90.900 MM)

2.1257-2.1263" (53.992-54.008 MM)
Rods:
2.5585-2.5595" (64.988-65.012 MM)
Main:
Main:
Comments:
300 SRT8, 90r V-8, OHV
CHRYSLER
6.2
6.3
300 SRT8
-06
Cyl Bore:
4.0551" (103.000 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.125" (3.175 MM)
.125
3.2530 @ #3
377
Stroke: 5.000" (127. MM)

2.3115-2.3125" (58.712-58.738 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
1142709, 670475, 686950, 870475
Casting Numbers:
CHRYSLER
46-53
383
59-71
4.2500" (107.95 MM)

Stroke: 3.375" (85.725 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.6245-2.6255" (66.662-66.688 MM) 1959+60 USE 4
Main:
1.2300 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1851527, 1855527, 2206157, 2206159, 2206160, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
"B" LO BLOCK, SHORT DECK HEIGHT, 1961-71 SM MAINS
100

Make
Liter
CID
Vin
Model
CHRYSLER
CHRYSLER
8 Cylinders
6.4
390
A/J
Engine Model
(cont.)
68-76
Stroke: 3.5740" (90.780 MM)

Cyl Bore:
2.2478-2.2485" (57.094-57.112 MM)
Rods:
#1 2.7474-2.7489" (69.784-69.822 MM)
Main:
Main:
Thrust Width:
2.8810" (73.177 MM)
Rear Seal Diameter:
3190792, 3190793, 3190797, 3190798, 3208795, 4487238
Casting Numbers:
Comments:
Year
4.1650" (105.791 MM)
1.2760 @ #3
AMC ENGINE
CHRYSLER
6.4
392
HEMI
Stroke: 3.906" (99.212 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.6870-2.6880" (68.25-68.275 MM)
Main:
Main:
1673755
Casting Numbers:
Comments:
PASSENGER CAR HEMI
CHRYSLER
6.6
400
57-58
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.2080 @ #3
HEMI
72-78
4.342" (110.287 MM)

Stroke: 3.375" (85.725 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.6245-2.6255" (66.662-66.688 MM)
Main:
1.230 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1737642, 1851527, 2203155, 2206159, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
"B" LO BLOCK, SHORT DECK HEIGHT
CHRYSLER
6.6
400
74-78
4.342" (110.287 MM)

Stroke: 3.375" (85.725 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.6245-2.6255" (66.662-66.688 MM)
Main:
1.230 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1737641, 1737642, 1851527, 2203155, 2206159, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
CHRYSLER
6.6
400
75-76
4.342" (110.287 MM)

Stroke: 3.375" (85.725 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.6245-2.6255" (66.662-66.688 MM)
Main:
1.230 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1737641, 1737642, 1851527, 2203155, 2206159, 3462923, 3751877, 4027172
Casting Numbers:
Comments:
CHRYSLER
Stroke:
Rods:
6.6
401
3.680" (93.472 MM)

2.2464-2.2485" (57.059-57.112 MM)
A/J
71-78
Cyl Bore:
4.165" (105.791 MM)
1.846-1.852" (46.888-47.041 MM)

Rod Width:
#1-4 2.7474-2.7489" (69.784-69.822 MM)
Main 1:
#5 2.7464-2.7479" (69.759-69.797 MM)
1.2730-1.2750" (32.334-32.385 MM) @ #3
Main:
Main 2:
Thrust Width:
2.881" (73.177 MM)
Rear Seal Diameter:
3190079, 3196921, 3196922, 3199842, 321472, 3214725, 3220411
Casting Numbers:
Comments:
AMC ENGINE /JEEP, VIN Z, 4BBL CARB
CHRYSLER
6.8
413
59-76
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1521436, 1851127, 1851436, 2206158, 2206160
Casting Numbers:
Comments:
"RB" RASIED BLOCK
CHRYSLER
6.8
413
4.1875" (106.363 MM)
59-77
4.1875" (106.363 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
1.230 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1521436, 1821436, 1851127, 1851436, 1851527, 1855127, 1978698, 2006157, 2206157, 2206158,
Casting Numbers:
2206160, 2463548, 3751888, 4027175, 8698461
Comments:
"RB" RASIED BLOCK, TRUCK, WATCH EXHAUST PATTERN
101

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
7.0
426
HJR
HEMI
Engine Model
(cont.)
66-71
HEMI
4.250" (107.95 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.7495-2.7505" (69.837-69.863 MM)
Main:
1.230 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1821436, 1851436, 1851527, 1855127, 1978698, 2006157, 2206157, 2206158, 2206160, 2463548,
Casting Numbers:
2780513, 2780533, 3751888, 4027175, 8698461
STREET HEMI, 1966 VIN H, 67-69 VIN J, 70-71 VIN R USE FULL GROOVED MAIN BEARINGS
Comments:
CHRYSLER
7.0
426
IND
Stroke: 3.750" (95.25 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
#1 2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
2206158
Casting Numbers:
Comments:
INDUSTRIAL, H-426, HEMI
CHRYSLER
7.0
HEMI
4.250" (107.95 MM)
Thrust Width:
1.230 @ #3
426
WEDGE
Stroke: 3.750" (95.250 MM)

Cyl Bore:
2.3740-2.3750" (60.300-60.325 MM)
Rods:
2.7495-2.7505" (69.837-69.863 MM)
Main:
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
2402330, 2463548
Casting Numbers:
Comments:
"RB" RASIED BLOCK, WEDGE HEAD 426 HYD LIFTER
CHRYSLER
7.2
440
71-77
Cyl Bore:
HEMI, H-426
65-66
4.250" (107.950 MM)
1.230 @ #3
66-73
4.320" (109.728 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
UNDERCUT NOT ROLLED
Rods:
Rod Fillet:
2.7495-2.7505" (69.837-69.863 MM)
UNDERCUT NOT ROLLED
Main:
Main Fillet:
1.226-1.2233" @ #3, * TWO FLANGES 3.62
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1821436, 1851436, 1851527, 1855127, 1978698, 2006157, 2206157, 2206158, 2206160, 2463548,
Casting Numbers:
3698641, 3751880, 3751888, 4027175, 8698461
Comments:
"RB" RASIED BLOCK *
CHRYSLER
7.2
440
74-76
4.320" (109.728 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
UNDERCUT NOT ROLLED
Rods:
Rod Fillet:
2.7495-2.7505" (69.837-69.863 MM)
UNDERCUT NOT ROLLED
Main:
Main Fillet:
1.230 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1821436, 1851436, 1855127, 1861527, 1978698, 2006157, 2206157, 2206158, 2206160, 2463548,
Casting Numbers:
3751880, 4027175, 8698461
Comments:
"RB" RASIED BLOCK
CHRYSLER
7.2
440
76-76
4.3200-4.3220" (109.728-109.779 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.3740-2.3750" (60.3-60.325 MM)
UNDERCUT NOT ROLLED
Rods:
Rod Fillet:
#1 2.7495-2.7505" (69.837-69.863 MM)
UNDERCUT NOT ROLLED
Main:
Main Fillet:
1.2300 @ #3
Main:
Thrust Width:
2.812-2.815" (71.425-71.501 MM)
Rear Seal Diameter:
1821436, 1851436, 1851527, 1855127, 1978698, 2206158, 2206160, 2463548, 3698481, 3751880,
Casting Numbers:
3751888, 4027175, 8698461
Comments:
"RB" RAISED BLOCK
CHRYSLER
7.8
Stroke: 3.750" (95.25 MM)

2.6230-2.6240" (66.624-66.65 MM)
Rods:
3.1240-3.1250" (79.35-79.375 MM)
Main:
Main:
133440R, 289878CI
Casting Numbers:
Comments:
NAVISTAR, MOTORHOME
478
69-77
Cyl Bore:
4.500" (114.3 MM)
Thrust Width:
.955 @ #3
102

Make
Liter
CID
Vin
Model
Year
CHRYSLER
CHRYSLER
8 Cylinders
9.0
549
Cyl Bore:
4.500" (114.3 MM)
Thrust Width:
.955 @ #3
NAVISTAR, MOTORHOME
CHRYSLER
CHRYSLER
Stroke:
Rods:
10 Cylinders
8.0
488
3.8819" (98.6 MM)

2.1240-2.1250" (53.95-53.975 MM)
2.9995-3.0005" (76.187-76.213 MM)

Main:
Main:
4.405" (111.887 MM)
Rear Seal Diameter:
53005823, 53006840
Casting Numbers:
Comments:
94-02
Cyl Bore:
4.0003-4.0008" (101.600-101.650 MM)
Rod Width:
1.875" (47.625 MM)
Thrust Width:
@ #3
V-10, OHV, 90, TRUCK, GASOLINE OIL PUMP DIAMETER = 1.668" FLAT 1.414"
RING 2.156"
CHRYSLER
Stroke:
Rods:
(cont.)
70-74
Stroke: 4.313" (109.55 MM)

2.6230-2.6240" (66.624-66.65 MM)
Rods:
3.1240-3.1250" (79.35-79.375 MM)
Main:
Main:
133894R
Casting Numbers:
Comments:
Engine Model
8.0
488
3.8819" (98.6 MM)

2.1240-2.1250" (53.95-53.975 MM)
FLYWHEEL CENTERING
94-97
4.0003-4.0008" (101.600-101.650 MM)
Cyl Bore:
1.875" (47.625 MM)

Rod Width:
2.9995-3.0005" (76.187-76.213 MM)
Main:
@ #3
Main:
Thrust Width:
4.405" (111.887 MM)
Rear Seal Diameter:
53005840, 53006840
Casting Numbers:
Comments:
V-10, OHV, 90, TRUCK, GASOLINE OIL PUMP DIAMETER = 1.668" FLAT 1.414" FLYWHEEL CENTERING
RING 2.156"
CHRYSLER
8.0
488
Stroke: 3.880" (98.6 MM)

2.1240-2.1250" (53.950-53.975 MM)
Rods:
3.0008-3.0018" (76.220-76.246 MM)
Main:
Main:
Comments:
V-10, OHV, 90, VIPER GTS, SFI
VIPER
CLIMAX
12 Cylinders
53.0
CLIMAX
3232
Stroke: 7.000" (177.8 MM)

4.7490-4.7500" (120.625-120.65 MM)
Rods:
#1 5.4990-5.5000" (139.675-139.7 MM)
Main:
Main:
A-12V-5001, AV-1250-C, AV-50-D
Casting Numbers:
61.0
CLIMAX
Cyl Bore:
Rod Fillet:
7.000" (177.8 MM)

9/64
Cyl Bore:
Rod Fillet:
7.500" (190.5 MM)

.140" (3.556 MM)
3,710
Stroke: 7.000" (177.8 MM)

4.7490-4.7500" (120.625-120.65 MM)
Rods:
#1 5.4990-5.5000" (139.675-139.7 MM)
Main:
Main:
A-12V-5001, AV-1250-C, AV-50-D
Casting Numbers:
CONTINENTAL
CONTINENTAL
2 Cylinders
1.3
79
TM
Stroke: 4.055" (102.997 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.8718-2.8730" (72.944-72.974 MM)
Main:
Main:
TM & TMD
Comments:
TM
3 Cylinders
2.0
Stroke: 4.060" (103.124 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.8720-2.8730" (72.949-72.974 MM)
Main:
Main:
TMD20C-300
Casting Numbers:
Comments:
TM & TMD
3.583" (91.008 MM)
Cyl Bore:
CONTINENTAL
CONTINENTAL
99-02
3.9998-4.0002" (101.594-101.606 MM)
Cyl Bore:
122
TM
TM20
Cyl Bore:
TM20 GAS
103
TM20
3.5827-3.5842" (91.001-91.039 MM)

Make
Liter
CID
Vin
Model
Year
CONTINENTAL
CONTINENTAL
3 Cylinders
2.0
122
TMD
Stroke: 4.060" (103.124 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.8720-2.8730" (72.949-72.974 MM)
Main:
Main:
TMD27C-300
Casting Numbers:
Comments:
(cont.)
TMD20
TMD20
3.583" (91.008 MM)
Cyl Bore:
DIESEL, TMD20 TMD 20 DIESEL ENGINE
CONTINENTAL
CONTINENTAL
4 Cylinders
0.9
56
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
GAS, N-56
Comments:
CONTINENTAL
0.9
56
56
N-56
2.250" (57.15 MM)
Cyl Bore:
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
#1 1.9990-2.0000" (50.775-50.8 MM)
Main:
Main: Numbers:
N62C-500
Casting
Comments:
Engine Model
N56
N56
2.250" (57.15 MM)
.094" (2.388 MM)
.094
Cyl Bore:
Rod Fillet:
Main Fillet:
N56
CONTINENTAL
1.0
62
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
#1 1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS, N-62, TO SERIAL #42049
CONTINENTAL
1.0
62
Stroke: 3.5000" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
#1 1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
162C-500, N62C-500
Casting Numbers:
Comments:
GAS, ALLIS CHALMERS G ENGINE ALSO
CONTINENTAL
1.1
69
1.1
CONTINENTAL
1.1
69
PY
1.1
69
PY69
2.500" (63.5 MM)
69
Y-69
2.500" (63.5 MM)
Cyl Bore:
69
Y4069
2.500" (63.5 MM)
Cyl Bore:
69
G
2.3750" (60.325 MM)
.094" (2.388 MM)
.094
1.375 @ #1
4069
Cyl Bore:
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
1.7475-1.7485" (44.387-44.412 MM)
Main:
Main:
Comments:
GAS, Y-69
CONTINENTAL
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
1.7475-1.7485" (44.387-44.412 MM)
Main:
Main:
Comments:
PY69
N-62
2.375" (60.325 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.500" (88.9 MM)

1.4490-1.5000" (36.805-38.1 MM)
Rods:
1.7475-1.7485" (44.387-44.412 MM)
Main:
Main:
Comments:
Y4069
CONTINENTAL
62
Cyl Bore:
Y69
Y69
2.500" (63.5 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
1.4990-1.5000" (38.075-38.1 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
#1 1.7475-1.7485" (44.387-44.412 MM)
.078
Main:
Main Fillet:
1.303 OR 1.397
Main:
Thrust Width:
Y112C-300, Y400C-213, Y400C-216, Y400C-225, Y400C-226, Y400C-334, Y400C-335, Y400C-338,
Casting Numbers:
Y400C-508, Y400C-511D
Comments:
Y69 * 1.3970" ALSO
CONTINENTAL
1.5
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
1.7475-1.7485" (44.387-44.412 MM)
Main:
Main:
Comments:
P410 ENGINE
91
410
Cyl Bore:
104
P410
2.875" (73.025 MM)

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
4 Cylinders
1.5
91
PY
Stroke: 3.500" (88.9 MM)

1.4990-1.5000" (38.075-38.1 MM)
Rods:
1.7475-1.7485" (44.387-44.412 MM)
Main:
Main:
PY91
Comments:
CONTINENTAL
Year
1.5
(cont.)
91
PY91
2.875" (73.025 MM)
Cyl Bore:
91
Engine Model
91
Y-91
2.875" (73.025 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
1.4990-1.5000" (38.075-38.1 MM)
5/64
Rods:
Rod Fillet:
1.7475-1.7485" (44.387-44.412 MM)
5/64
Main:
Main Fillet:
1.303 OR 1.397
Main:
Thrust Width:
Casting Numbers:
Y400C-508, Y400C-511D
Comments:
GAS, Y-91 * 1.397 ALSO
CONTINENTAL
1.8
112
112
Y-112
3.188" (80.975 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
1.4990-1.5000" (38.075-38.1 MM)
5/64
Rods:
Rod Fillet:
#1 1.7475-1.7485" (44.387-44.412 MM)
5/64
Main:
Main Fillet:
1.303 OR 1.397
Main:
Thrust Width:
Casting Numbers:
Y400C-511D
Comments:
GAS, Y-112 * 1.3970" ALSO
CONTINENTAL
2.0
120
Z120
Z120
3.187" (80.95 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
3/32
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
3/32
Main:
Main Fillet:
1.385 (35.179 mm)
Main:
Thrust Width:
3.375" (85.725 MM)
Rear Seal Diameter:
Z-120-500
Casting Numbers:
Comments:
GAS, TO-20 MASSEY, VALVE LASH IS LISTED AS .013" HOT FOR BOTH VALVES
CONTINENTAL
2.0
124
124
F-124
3.000" (76.2 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
.094" (2.388 MM)
Main:
Main Fillet:
Main: Numbers:
F140C-303, F162C-319, F400C-209, F400C-222, F400C-228, F400C-314, F400C-321, F400C-324,
Casting
F400C-368, F400C-500, F400C-501
Comments:
GAS, F-124
CONTINENTAL
2.1
129
Z129
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
Z-129C-205, Z-129C-500, Z-134C-500
Casting
Comments:
Z129
3.250" (82.55 MM)
.094" (2.388 MM)
.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Z129
CONTINENTAL
2.2
134
Z134
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
3.375" (85.725 MM)
Main:Seal Diameter:
Rear
Z-129C-205, Z-129C-500, Z-134C-500
Casting Numbers:
Comments:
GAS
CONTINENTAL
2.2
Stroke: 4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
Rods:
#1 2.3744-2.3752" (60.31-60.33 MM)
Main:
Main:
F400C-509T
Casting Numbers:
Comments:
GAS, F-135
135
Z134
3.3130-3.3150" (84.15-84.201 MM)
.094" (2.388 MM)
.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
135
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
105
F-135
3.125" (79.375 MM)
.125" (3.175 MM)
.125" (3.175 MM)
1.6380

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
Year
4 Cylinders
2.3
140
Engine Model
(cont.)
140
F-140
3.1875" (80.963 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
1.313
Main:
Thrust Width:
Casting Numbers:
F400C-324, F400C-368, F400C-500, F400C-501
GAS, F-140
Comments:
CONTINENTAL
2.3
145
FS
FS
FS
3.250" (82.55 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.0595-2.0605" (52.311-52.337 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.2450-2.2460" (57.023-57.048 MM)
.125" (3.175 MM)
Main:
Main Fillet:
1.3820
Main:
Thrust Width:
Casting Numbers:
F400C-359, F400C-359, F400C-368, F400C-500, F400C-501, F400C-503, F400C-503
Comments:
MILITARY
CONTINENTAL
2.4
145
Z145
Stroke: 4.063" (103.2 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
Z134C-500
Casting Numbers:
Comments:
GAS
CONTINENTAL
2.6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
157
GD
Stroke: 4.375" (111.125 MM)

2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
Comments:
DIESEL, CASE TRACTOR MODEL 300, 300B
CONTINENTAL
2.6
2.7
157
162
2.7
163
G157
2.7
163
G157
3.375" (85.725 MM)
162
F-162
3.4375-3.4395" (87.313-87.363 MM)
Cyl Bore:
Stroke: 4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
Rods:
2.3744-2.3752" (60.31-60.33 MM)
Main:
Main:
F400C-510, F400C-510B
Casting Numbers:
Comments:
GAS, F-163
CONTINENTAL
GD157
3.375" (85.725 MM)
Cyl Bore:
Stroke: 4.375" (111.125 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
F-400C-509C, F-401C-302, F-401C-403
Casting Numbers:
Comments:
GAS, F-162
CONTINENTAL
157
Cyl Bore:
Stroke: 4.375" (111.125 MM)

2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
Comments:
G157
CONTINENTAL
Z145
3.375" (85.725 MM)
3/32
3/32
1.5030
163
F-163
Cyl Bore:
3.4375-3.4395" (87.313-87.363 MM)
Thrust Width:
1.637" (41.579 MM)
F (4)
163
F-163
3.438" (87.325 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.0619-2.0627" (52.372-52.393 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.3744-2.3752" (60.31-60.33 MM)
.094
Main:
Main Fillet:
1.6380
Main:
Thrust Width:
F400C-350, F400C-358, F400C-359, F400C-359, F400C-503, F400C-503, F400C-509S, F400C-509T,
Casting Numbers:
F400C-600, F401C-302, F401C-403
Comments:
GAS, F163, MILITARY
CONTINENTAL
2.7
Stroke: 4.0600" (103.124 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.8718-2.8730" (72.944-72.974 MM)
Main:
Main:
Comments:
GAS, TM-27
164
164
Cyl Bore:
106
TM-27
3.5827-3.5842" (91.001-91.039 MM)

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
Engine Model
4 Cylinders
2.7
164
TM
Stroke: 4.060" (103.124 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.8720-2.8730" (72.949-72.974 MM)
Main:
Main:
TM27-2-600, TM27C-600
Casting Numbers:
Comments:
Year
TM27
(cont.)
TM27 GAS
3.5827-3.5842" (91.001-91.039 MM)
Cyl Bore:
TM27 GAS
CONTINENTAL
2.7
164
TMD
Stroke: 4.060" (103.124 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.8720-2.8730" (72.949-72.974 MM)
Main:
Main:
2.244" (56.998 MM)
3.250" (82.55 MM)
Rear Seal Diameter:
TMD27C-300
Casting Numbers:
Comments:
TMD27 DIESEL
CONTINENTAL
2.9
176
Stroke: 4.375" (111.125 MM)

2.0615-2.0625" (52.362-52.388 MM)
Rods:
#1 2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
G176C-300, G176C-300C
Casting Numbers:
Comments:
G176, MASSEY 165 & FORKLIFT
CONTINENTAL
3.2
193
3.2
CONTINENTAL
3.3
3.4
CONTINENTAL
3.4
4193
3.750" (95.25 MM)
G193
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
201
G193
3.750" (95.25 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.753
ED201
206
ED201
3.625" (92.075 MM)
Cyl Bore:
Stroke: 4.500" (114.300 MM)

2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.3740-2.3750" (60.300-60.325 MM)
Main:
Main:
Comments:
GAS
G176
3.580" (90.932 MM)
.094" (2.388 MM)
.094
1.7530
4193
193
Stroke: 4.875" (123.825 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
Comments:
OHV, DIESEL, ED201
CONTINENTAL
G
Cyl Bore:
Stroke: 4.375" (111.125 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
G193C-202, G193C-403, GD193C-600
Casting Numbers:
Comments:
G193
TMD27 DIESEL
3.5827-3.5842" (91.001-91.039 MM)
.110" (2.794 MM)
.120
1.2545-1.2565" (31.864-31.915 MM)
G176
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.375" (111.125 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
Comments:
GAS ENGINE
CONTINENTAL
TMD27
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
G206
208
G206
3.8125" (96.838 MM)
Cyl Bore:
ED208
ED208
3.813" (96.85 MM)

Stroke: 4.875" (123.825 MM)
Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.6240-2.6250" (66.65-66.675 MM)
.1720" (43.688 MM)
Main:
Main Fillet:
2.0060" (50.952 MM)
Main:
Thrust Width:
E223C-300, E400C-600, ED201C-202, ED400C-200, ED400C-201, ED400C-202, ED400C-600
Casting Numbers:
Comments:
OHV, DIESEL, ED208
CONTINENTAL
3.7
223
E223
3.813" (96.85 MM)

Stroke: 4.875" (123.825 MM)
Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.6240-2.6250" (66.65-66.675 MM)
.172
Main:
Main Fillet:
2.006
Main:
Thrust Width:
E223C-300, E400C-600, ED201C-202, ED400C-200, ED400C-201, ED400C-202, ED400C-600
Casting Numbers:
Comments:
ED223 DIESEL
107
ED223

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
Engine Model
4 Cylinders
4.0
242
E242
Stroke: 5.125" (130.175 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
E242C-300, E242C-600
Casting Numbers:
Comments:
Year
(cont.)
ED242
3.875" (98.425 MM)
Cyl Bore:
ED242 DIESEL
CONTINENTAL
4.0
243
E243
Stroke: 4.875" (123.825 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
E242C-300, E242C-600
Casting Numbers:
Comments:
E243
CONTINENTAL
4.0
243
E243
3.813" (96.85 MM)
Cyl Bore:
HD243
HD243
3.750" (95.25 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.8730-2.8740" (72.974-73. MM)
.172
Main:
Main Fillet:
2.3260
Main:
Thrust Width:
E242C-300, E242C-600, H260C-602, H260C-603, HD260C-204, HD260C-424
Casting Numbers:
Comments:
HD243 USES T/W ALSO
CONTINENTAL
4.3
260
HD260
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
2.8730-2.8740" (72.974-73. MM)
Main:
Main:
Thrust Width:
H260C-602, H260C-603, HD260C-204, HD260C-424
Casting Numbers:
Comments:
HD260 USES THRUST WASHERS
CONTINENTAL
4.5
277
4.5
6.3
HD277 & HD260

4.000" (101.6 MM)
Cyl Bore:
277
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
#1 2.8730-2.8740" (72.974-73. MM)
Main:
Main:
Thrust Width:
H260C-602, H260C-603, HD260C-204, HD260C-424
Casting Numbers:
CONTINENTAL
2.326
HD277
Stroke: 5.500"
2.4980-2.4990"
Rods:
2.873-2.874" (72.974-73. MM)
Main:
Main:
Comments:
HD260, HD277
CONTINENTAL
HD260
3.875" (98.425 MM)
382
4.000" (101.6 MM)
2.3260
JD382
JD382
4.5000" (114.3 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.7500" (69.85 MM) *
Rods:
3.250-3.251" (82.55-82.575 MM)
Main:
Main:
J382C-600C, J382C602, J382C-602, JD382C-204, JD382C-224
Casting Numbers:
Comments:
JD382 DIESEL, USED IN MASSEY AND CASE T1000 *REPORTED AND ALSO HAVE SEEN 2.500" WITH
DIFFERENTRODS
CONTINENTAL
6.6
403
J403
Stroke: 6.000" (152.4 MM)

2.7475-2.7485" (69.787-69.812 MM)
Rods:
3.2500-3.2510" (82.55-82.575 MM)
Main:
Main:
Comments:
4 CYL DIESEL
CONTINENTAL
CONTINENTAL
6 Cylinders
2.8
170
170
Stroke: 4.000" (101.6 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
F168 & F170
Comments:
CONTINENTAL
Stroke:
Rods:
Main:
Main:
J403
4.6260" (117.5 MM)
Cyl Bore:
3.0
4.000" (101.6 MM)

1.9365-1.9375" (49.187-49.213 MM)
2.2490-2.2500" (57.125-57.15 MM)
184
F170 & F168

3.000" (76.2 MM)
Cyl Bore:
DS & F
Cyl Bore:
108
DS & F
3.125" (79.375 MM)

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
6 Cylinders
3.1
186
Stroke: 4.375" (111.125 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
GAS, F-186
Comments:
CONTINENTAL
Stroke:
Rods:
Main:
Main:
3.3
3.3
199
3.3
F-186
199
DS
199
3.250" (82.55 MM)
202
Stroke: 4.375" (111.125 MM)

Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.2490-2.5000" (57.125-63.5 MM)
Main:
Main:
D600C-218, D600C-368, D600C-601, D600C-603, F186C-300
Casting Numbers:
Comments:
6202 DIESEL
CONTINENTAL
(cont.)
3.000" (76.2 MM)
Cyl Bore:
202
Engine Model
186
Cyl Bore:
4.000" (101.6 MM)

1.9365-1.9375" (49.187-49.213 MM)
2.2490-2.2500" (57.125-57.15 MM)
CONTINENTAL
Year
202
6202
3.125" (79.375 MM)
DS202
DS202
3.125" (79.375 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
.094
Main:
Main Fillet:
1.2430
Main:
Thrust Width:
D600C-218, D600C-368, D600C-601, D600C-603, E223C-300, E400C-600, ED201C-202, ED400C-200,
Casting Numbers:
ED400C-201, ED400C-202, ED400C-600, F186C-300
Comments:
DS 202 GAS OLIVER 70 SERIES TRACTOR SMALL RODS, USES T/W
CONTINENTAL
3.4
209
F209
F209
3.1875" (80.963 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
3/32
Rods:
Rod Fillet:
2.2490-2.2500" (57.125-57.15 MM)
3/32
Main:
Main Fillet:
1.1960
Main:
Thrust Width:
D600C-218, D600C-368, D600C-601, D600C-603, F186C-300, F600C-217, F600C-217, F600C-243,
Casting Numbers:
F600C-243, F600C-344, F600C-344, F600C-500A, F600C-500A, F600C-502A, F600C-502A, F600C-504,
F600C-504, F600C-536, F600C-536, F600C-600, F600C-600, F600C-601, F600C-601, F600C-606A,
F600C-606A
Comments:
GAS, F-209
CONTINENTAL
3.6
218
F218
F218
3.250" (82.55 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.4365-2.4372" (61.887-61.905 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.2490-2.2500" (57.125-57.15 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.2430
Main:
Thrust Width:
D186-300, D186-300, D600C-218, D600C-218, D600C-368, D600C-368, D600C-601, D600C-601,
Casting Numbers:
D600C-603, D600C-603, F186C-300, F186C-300, F218C-318, F218C-318, F400C-209, F400C-209,
F400C-222, F400C-222, F400C-228, F400C-228
CONTINENTAL
3.7
226
F226
F226 & F06226
3.3125" (84.138 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.0619-2.0627" (52.372-52.393 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3744-2.3752" (60.31-60.33 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.1960*
Main:
Thrust Width:
F600C-217, F600C-243, F600C-344, F600C-500A, F600C-502A, F600C-504, F600C-536, F600C-600,
Casting Numbers:
F600C-601, F600C-606A
Comments:
GAS, F226, FO6226, L-HEAD * 1.6380", CAN USE T, LARGE RODS
CONTINENTAL
3.7
227
Stroke: 4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
Rods:
2.3744-2.3752" (60.31-60.33 MM)
Main:
Main:
Comments:
GAS, F-227
CONTINENTAL
4.0
Stroke: 4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
Rods:
2.3744-2.3752" (60.31-60.33 MM)
Main:
Main:
Comments:
GAS, F-244
227
244
F227
3.3125" (84.138 MM)
Cyl Bore:
F244
Cyl Bore:
109
F-244
3.4375" (87.313 MM)

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
Year
6 Cylinders
4.0
245
Engine Model
(cont.)
245
F-245
3.438" (87.325 MM)

Cyl Bore:
.094" (2.388 MM)
Rod Fillet:
1.125" (28.575 MM)
Rod Width:
#1 2.3744-2.3752" (60.31-60.33 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.196 OR 1.638
Main:
Thrust Width:
F600C-217, F600C-217, F600C-243, F600C-243, F600C-344, F600C-344, F600C-500A, F600C-500A,
Casting Numbers:
F600C-502A, F600C-502A, F600C-504, F600C-504, F600C-512, F600C-512, F600C-536, F600C-536,
F600C-600, F600C-600, F600C-601, F600C-601, F600C-606A, F600C-606A, F600C-610
GAS, F-245 * 1.6380" ALSO
Comments:
Stroke:
Rods:
4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
CONTINENTAL
4.2
253
M253
Stroke: 4.375" (111.125 MM)

Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
Rods:
Rod Fillet:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main Fillet:
Main:
Thrust Width:
K600C-303, M600C-203, M600C-302, M600C-303, M600C-501
Casting Numbers:
Comments:
M6253
CONTINENTAL
4.4
271
38
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
Comments:
38B
CONTINENTAL
4.4
271
4.4
40
271
4.8
290
K271
K&M
4.8
290
CONTINENTAL
5.4
4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
CONTINENTAL
5.4
338
K&M
K330
Stroke: 4.375" (111.125 MM)

Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
Rods:
Rod Fillet:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main Fillet:
Main:
Thrust Width:
K600C-303, M600C-203, M600C-302, M600C-303, M600C-501
Casting Numbers:
Comments:
GAS, OHV, K330, M330 FLATHEAD, 6330
CONTINENTAL
6.0
Stroke: 4.813" (122.25 MM)

2.248-2.249" (57.099-57.125 MM)
Rods:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
K600C-600, M600C-335
Casting Numbers:
Comments:
GAS, OHV, K-363, M-363, 6363
363
M338
4.000" (101.6 MM)
Cyl Bore:
330
K6290 & M6290

3.750" (95.25 MM)
Cyl Bore:
330
K-290 & M-290

3.750" (95.25 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.4640
6290
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
Comments:
K & M 6290
Stroke:
Rods:
K271 & M271

3.625" (92.075 MM)
290
Stroke: 4.375" (111.125 MM)

Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
Rods:
Rod Fillet:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main Fillet:
Main:
Thrust Width:
K600C-303, M600C-203, M600C-302, M600C-303, M600C-501
Casting Numbers:
Comments:
GAS, K & M-290
CONTINENTAL
40B
3.625" (92.075 MM)
Cyl Bore:
Stroke: 4.375" (111.125 MM)

Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
K600C-303, M600C-203, M600C-302, M600C-303, M600C-501
Casting Numbers:
Comments:
GAS, K & M271
CONTINENTAL
38B
3.625" (92.075 MM)
Cyl Bore:
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
Comments:
40B
CONTINENTAL
M6253
3.625" (92.075 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.4640
K&M
K330 & M330

4.000" (101.6 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.4640
363
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
110
K-363 & M-363

4.000" (101.6 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.4640

Make
Liter
CID
Vin
Model
CONTINENTAL
CONTINENTAL
Year
6 Cylinders
6.1
371
B&T
Stroke: 4.813" (122.25 MM)

2.4980-2.4990" (63.449-63.475 MM)
Rods:
2.8730-2.8740" (72.974-73. MM)
Main:
Main:
K600C-600, M600C-335
Casting Numbers:
371
(cont.)
B-371 & T-371
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.125" (104.775 MM)

3/32
3/32
1.4640
Stroke: 4.375" (111.125 MM)

Cyl Bore:
2.2480-2.2490" (57.099-57.125 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
Thrust Width:
K600C-303, M600C-203, M600C-302, M600C-303, M600C-501
Casting Numbers:
4.375" (111.125 MM)
Comments:
Engine Model
GAS, T & B-371
CONTINENTAL
CONTINENTAL
6.5
6.6
396
405
Stroke: 4.625" (117.475 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
#1 2.8730-2.8740" (72.974-73. MM)
Main:
Main Fillet:
Main: Numbers:
B600C-304, B600C-500, T371C-300, T427C-300
Casting
CONTINENTAL
7.0
427
1.4640
4.313" (109.55 MM)

.141" (3.581 MM)
.141
TD
4.313" (109.55 MM)

Stroke: 4.875" (123.825 MM)
Cyl Bore:
2.498-2.499" (63.449-63.475 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
2.8730-2.8740" (72.974-73. MM)
.141
Main:
Main Fillet:
Main: Numbers:
B600C-307, B600C-308, B600C-501, B602C-304, B602C-307, T427C-301, T427C-305
Casting
Comments:
DIESEL
CONTINENTAL
7.0
427
B&T
T427
B427 & T427
4.3125-4.3145" (109.538-109.588 MM)

Stroke: 4.875" (123.825 MM)
Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
2.8730-2.8740" (72.974-73. MM)
.141" (3.581 MM)
Main:
Main Fillet:
Main:
B600C-307, B600C-308, B600C-501, B602C-304, B602C-307, T427C-301, T427C-305
Casting Numbers:
Comments:
GAS, OHV,V 6, T427, B427, T6427
CONTINENTAL
7.8
478
T478
Stroke: 4.875" (123.825 MM)

2.9972-2.9982" (76.129-76.154 MM)
Rods:
3.6222-3.6232" (92.004-92.029 MM)
Main:
Main:
Comments:
GAS, OHV, T478, 6478
CONTINENTAL
8.2
T478 & 6478

3.563" (90.5 MM)
Cyl Bore:
501
U501
U501 & 6501
2.7475-2.7485" (69.787-69.812 MM)

Rods:
2.7475-2.7485" (69.787-69.812 MM)
Main:
Main:
B600C-307, B600C-308, B600C-501, B602C-304, B602C-307, T427C-301, T427C-305
Casting Numbers:
Comments:
GAS, OHV, U501, 6501
CONTINENTAL
8.4
513
R513
Stroke: 5.375" (136.525 MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main: Numbers:
R600C-500, R600C-501
Casting
Comments:
GAS, OHV, R513, 6513
CONTINENTAL
9.4
572
R572
Stroke: 5.375" (136.525 MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
Comments:
GAS, OHV, R572, 6572
CONTINENTAL
9.4
RD
RD572
2.999-3.000" (76.175-76.2 MM)

Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
Comments:
DIESEL
111
R572 & 6572

4.500" (114.3 MM)
Cyl Bore:
572
R513 & 6513

4.500" (114.3 MM)
.109" (2.769 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
RD572

Make
Liter
CID
Vin
Model
Year
CONTINENTAL
CONTINENTAL
6 Cylinders
9.9
602
R602
Stroke: 5.375" (136.525 MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main: Numbers:
R600C-500, R600C-501
Casting
Comments:
Engine Model
(cont.)
R602 & 6602
4.875" (123.825 MM)

7/64 (.109)
7/64 (.109)
Cyl Bore:
Rod Fillet:
Main Fillet:
GAS, OHV, R602, 6602
CONTINENTAL
12.3
749
S749 & 6749
SD802
SD802
S820
S820 & 6820
3.4990-3.5000" (88.875-88.9 MM)

Rods:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
Comments:
GAS, OHV, S749, 6749
CONTINENTAL
13.1
802
SD
3.499-3.500" (88.875-88.9 MM)

Rods:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
Comments:
DIESEL
CONTINENTAL
13.4
820
3.4990-3.5000" (88.875-88.9 MM)

Rods:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
Comments:
GAS, OHV, S820, 6820
Thrust Width:
3.001
CONTINENTAL
CONTINENTAL
8 Cylinders
9.9
603
V603
V603
VD603
VD603
3.124-3.125" (79.35-79.375 MM)

Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
CONTINENTAL
9.9
603
VD
3.124-3.125" (79.35-79.375 MM)

Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
R600C-500, R600C-501
Casting Numbers:
Comments:
V/DIESEL
CROSLEY
CROSLEY
4 Cylinders
0.7
44
46-55
Stroke: 2.250" (57.15 MM)

1.3740-1.3750" (34.9-34.925 MM)
Rods:
1.3740-1.3750" (34.9-34.925 MM)
Main 1:
1.3740-1.3750" (34.9-34.925 MM)
Main 2:
1.3740-1.3750" (34.9-34.925 MM)
Main 3:
1.3740-1.3750" (34.9-34.925 MM)
Main 4:
1.4990-1.5000" (38.075-38.1 MM)
Main 5:
205215, 205230, C741
Casting Numbers:
Comments:
Cyl Bore:
2.500" (63.5 MM)
Thrust Width:
1.5050
CC47, CD, VC
CUMMINS
CUMMINS
3 Cylinders
1.7
105
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
Balance: Internal
3A1.7
Casting Numbers:
Comments:
CC47
A SERIES
A SERIES
Cyl Bore:
3.504" (89.002 MM)
Thrust Width:
1.337-1.341
ONAN, A SERIES, DIESEL
CUMMINS
CUMMINS
4 Cylinders
1.4
Stroke: 5.000" (127. MM)

2.624-2.625" (66.65-66.675 MM)
Rods:
3.874-3.875" (98.4-98.425 MM)
Main:
Main:
C90 DIESEL
Comments:
90
C90
Cyl Bore:
112
C90
4.438" (112.725 MM)

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
4 Cylinders
1.7
105
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
C105 DIESEL
Comments:
CUMMINS
2.2
140
2.3
140
CUMMINS
2.3
140
CUMMINS
2.7
165
CUMMINS
2.9
180
3.2
CUMMINS
3.3
200
L SERIES
3.504" (89.002 MM)
Thrust Width:
1.337-1.341 @#6
NT165
3.9
Stroke: 4.724" (119.99 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
5.117" (129.972 MM)
Rear Seal Diameter:
3903827, 3907803
Casting Numbers:
Comments:
B SERIES DIESEL
NT180
NT180
5.125" (130.175 MM)
NT200
Cyl Bore:
199
NT200
5.125" (130.175 MM)
B3.3 SERIES
238
239
NT165
5.125" (130.175 MM)
Cyl Bore:
3.9
L SERIES
Cyl Bore:
NT
Cyl Bore:
113
98-04
QSB
4.0157-4.0173" (101.999-102.039 MM)
B SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
B3.3 SERIES
3.740" (95.000 MM)
B SERIES
Stroke: 4.7244" (120.000 MM)

2.7160-2.7170" (68.966-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main 1:
.0047" MAX (.119 MM)
Main:
Main 6:
Comments:
QSB3.9, B SERIES DIESEL, 16 VALVE,
CUMMINS
1.337-1.341
Cyl Bore:
Stroke: 4.528" (115.000 MM)

2.2441" (57.000 MM)
Rods:
2.7559" (70.000 MM)
Main:
Main:
Comments:
DIESEL, TURBO & NON
CUMMINS
Thrust Width:
NT
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
111787
Casting Numbers:
Comments:
NT200
A SERIES
3.504" (89.002 MM)
Cyl Bore:
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
111787
Casting Numbers:
Comments:
NT180
CUMMINS
A SERIES
NT
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
111787
Casting Numbers:
Comments:
NT165
C140
4.438" (112.725 MM)
Cyl Bore:
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
Balance: Internal
6A3.4
Casting Numbers:
Comments:
ONAN L SERIES DIESEL
C105
C140
Cyl Bore:
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
Balance: Internal
Comments:
ONAN, A SERIES DIESEL
(cont.)
4.438" (112.725 MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
C140 DIESEL
CUMMINS
C105
Engine Model
83-98
B SERIES
4.0157-4.0173" (101.999-102.039 MM)

.1567-.1583" (3.98-4.021 MM)
.1662-.1678
1.4760 @ #4

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
4 Cylinders
4.1
4.4
Cyl Bore:
Rod Fillet:
Main Fillet:
267
4.5
275
5.1
7.3
309
C309
8.1
C309
4.438" (112.725 MM)
.141" (3.581 MM)
1.436
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.875" (123.825 MM)

.188" (4.775 MM)
.188
3.003
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
5.125" (130.175 MM)

.188" (4.775 MM)
.188
3.003
495
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
111787, 123380, 123400, 123420, 162187
Casting Numbers:
CUMMINS
CUMMINS
6 Cylinders
2.9
180
V6R-180
Stroke: 4.125" (104.775 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
V6R-180
Comments:
CUMMINS
3.1
195
3.1
CUMMINS
3.1
195
CS
195
CUMMINS
3.1
C195
4.438" (112.725 MM)
CS195
NH
CS195
4.438" (112.725 MM)
Cyl Bore:
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
Comments:
NH195
Stroke: 4.125" (104.775 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
Comments:
V6E-195
C195
Cyl Bore:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
CS195
NH195
Cyl Bore:
195
NH195
4.875" (123.825 MM)
V6E-195
Cyl Bore:
114
V6R-180
5.500" (139.7 MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
C195
CUMMINS
QSB
448
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
111787, 123380, 123400, 123420, 162187
Casting Numbers:
CUMMINS
98-04
4.0157-4.0173" (101.999-102.039 MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Thrust Width:
106071, 10974, 110541, 11054-1, 112330, 135580, 135581
Casting Numbers:
Comments:
C309
CUMMINS
POWER TORQ 2
4.125" (104.775 MM)

.141" (3.581 MM)
.141
1.436
B SERIES
Stroke: 5.433" (138.000 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
Comments:
QSB4.5, B SERIES DIESEL, 16 VALVE,
CUMMINS
4.000" (101.6 MM)

.109" (2.769 MM)
.109
POWER TORQUE
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main Fillet:
Main:
Thrust Width:
106071, 10974, 110541, 112330, 135580, 135581
Casting Numbers:
Comments:
POWER TORQUE 270
CUMMINS
(cont.)
251
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main: Numbers:
4783, A1740
Casting
CUMMINS
Engine Model
5.500" (139.7 MM)
V6E-195

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
6 Cylinders
3.2
200
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
C200
Comments:
CUMMINS
3.2
CUMMINS
3.4
200
210
3.4
210
3.4
210
3.5
215
4.5
5.8
5.9
Thrust Width:
1.337-1.341 @ #6
Cyl Bore:
3.5034-3.5044" (88.986-89.012 MM)
Thrust Width:
1.3366
Cyl Bore:
3.5034-3.5044" (88.986-89.012 MM)
Thrust Width:
1.3366" (33.950 MM)
6AT-12 TURBO
V6-215
280
VT6-280
352
VT6-280
5.500" (139.7 MM)
Cyl Bore:
V352
Cyl Bore:
Rod Fillet:
Main Fillet:
359
V6-215
5.500" (139.7 MM)
Cyl Bore:
Stroke: 3.500" (88.9 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Comments:
V352
CUMMINS
3.5034-3.5044" (88.986-89.012 MM)
V6
Stroke: 4.125" (104.775 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
Comments:
VT6-280
CUMMINS
Cyl Bore:
Stroke: 4.125" (104.775 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
Comments:
V6-215
CUMMINS
5.500" (139.7 MM)
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.010 MM)
Rods:
2.9917-2.9925" (75.989-76.010 MM)
Main:
Main:
1703855, 6A34
Casting Numbers:
Comments:
TURBO DIESEL, 6AT-12 ONAN ENGINE
CUMMINS
V6-200B
Cyl Bore:
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.01 MM)
Rods:
#1 2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
1703855, 6A3.4
Casting Numbers:
Comments:
ONAN TURBO
CUMMINS
C200
4.438" (112.725 MM)
V6-200B
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
Balance: Internal
1703855, 6A3.4
Casting Numbers:
Comments:
ONAN DIESEL
CUMMINS
(cont.)
C200
Cyl Bore:
Stroke: 4.125" (104.775 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
Comments:
V6-200B
Engine Model
V352
4.625" (117.475 MM)
.141" (3.581 MM)
.141
B SERIES
83-98
B SERIES
4.0157-4.0173" (101.999-102.039 MM)

Stroke: 4.724" (119.99 MM)
Cyl Bore:
2.7160-2.7170" (68.986-69.012 MM)
.15625" (3.969 MM)
Rods:
Rod Fillet:
3.2672-3.2682" (82.987-83.012 MM)
.15625" (3.969 MM)
Main:
Main Fillet:
1.475-1.477 @#6
Main:
Thrust Width:
5.115" (129.921 MM)
Rear Seal Diameter:
3907804
Casting Numbers:
Comments:
12 VALVE, TURBO DIESEL DODGE TRUCKS THRUST BRG LENGTH STD 1.4690-1.470" (36.322-37.338 MM)
CUMMINS
5.9
Stroke: 4.7244" (120.000 MM)

2.7160-2.7170" (68.986-69.012 MM)
Rods:
3.2672-3.2682" (82.987-83.012 MM)
Main:
Main:
Comments:
24 VALVE TURBO DIESEL, B SERIES
359
B SERIES
Cyl Bore:
115
98-03
ISB
4.0157-4.0173" (101.999-102.039 MM)

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
6 Cylinders
6.2
378
V6
Stroke: 3.750" (95.25 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
V378
Comments:
CUMMINS
6.6
V378
(cont.)
V378
4.625" (117.475 MM)

9/64
9/64
Cyl Bore:
Rod Fillet:
Main Fillet:
401
Engine Model
J SERIES
C-180
4.125" (104.775 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
3.8740-3.8750" (98.4-98.425 MM)
.141
Main:
Main Fillet:
Main: Numbers:
10541B, 1054B, 106071, 110541, 110541B, 146450, 156290, E5734JN
Casting
Comments:
MODEL MASTER, 4 VALVE, C-180 DIESEL
CUMMINS
6.6
401
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
J SERIES
CUMMINS
6.6
J SERIES
401
J SERIES
4.125" (104.775 MM)

.141" (3.581 MM)
.141
Cyl Bore:
Rod Fillet:
Main Fillet:
J160
J160
4.125" (104.775 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
3.8740-3.8750" (98.4-98.425 MM)
.141
Main:
Main Fillet:
1.436
Main:
Thrust Width:
10541B, 1054B, 106071, 110541, 110541B, 146450, 156290, E5734JN
Casting Numbers:
Comments:
J160
CUMMINS
6.6
401
JN
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
JN SERIES
CUMMINS
6.6
401
JS
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
JS SERIES
CUMMINS
6.6
401
6.6
401
6.8
420
7.6
CUMMINS
7.6
5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
#1 3.8740-3.8750" (98.4-98.425 MM)
NTA420
464
C 160
C160
4.438" (112.725 MM)
C 175
Cyl Bore:
116
NTA420
5.500" (139.7 MM)
Cyl Bore:
464
JT SERIES
4.125" (104.775 MM)

.141" (3.581 MM)
.141
Cyl Bore:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
DIESEL
Stroke:
Rods:
Main:
Main:
JT SERIES
NT
JT SERIES
4.125" (104.775 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
Comments:
NTA420
CUMMINS
JT SERIES
JT
JS SERIES
4.125" (104.775 MM)

.141" (3.581 MM)
.141
Cyl Bore:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
JT SERIES
CUMMINS
JS SERIES
JT
JN SERIES
4.125" (104.775 MM)

.141" (3.581 MM)
.141
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.8740-3.8750" (98.4-98.425 MM)
Main:
Main:
Comments:
JT SERIES
CUMMINS
JN SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
C175
4.438" (112.725 MM)

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
Stroke:
Rods:
Main:
Main:
6 Cylinders
7.6
464
C 180
5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
#1 3.8740-3.8750" (98.4-98.425 MM)
CUMMINS
7.6
(cont.)
C180
4.438" (112.725 MM)
Cyl Bore:
464
Engine Model
C 180
C-180
4.438" (112.725 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
3.8740-3.8750" (98.4-98.425 MM)
.141
Main:
Main Fillet:
1.436
Main:
Thrust Width:
10541B, 1054B, 106071, 110541, 110541B, 146450, 156290, E5734JN
Casting Numbers:
Comments:
C-180, 4 VALVE
CUMMINS
7.6
Stroke:
Rods:
Main:
Main:
5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
#1 3.8740-3.8750" (98.4-98.425 MM)
Stroke:
Rods:
Main:
Main:
5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
#1 3.8740-3.8750" (98.4-98.425 MM)
CUMMINS
CUMMINS
7.6
8.3
464
C 190
464
C 200
Cyl Bore:
505
Stroke: 5.3150" (135.001 MM)

2.9916-2.9926" (75.987-76.012 MM)
Rods:
3.8568-3.8588" (97.963-98.014 MM)
Main:
Main:
5.1170-5.1190" (129.972-130.023 MM)
Rear Seal Diameter:
390562, 3914584, 3917320
Casting Numbers:
Comments:
C-SERIES DIESEL
CUMMINS
8.3
505
8.3
C SERIES
9.6
85-90
Thrust Width:
1.692-1.696 @ #4
C SERIES
91-00
Cyl Bore:
4.4882" (114. MM)
Thrust Width:
1.692-1.696 @ #4
505
ISC/QSC
98-06
CUMMINS
9.6
V6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
117
ISC/QSC
1.6920-1.6960" (42.976-43.078 MM) @ #4
588
588
C SERIES
4.4897" (114.040 MM)
5.500" (139.7 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
3.1240-3.1250" (79.35-79.375 MM)
3/16 (NM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
9/64
Main:
Main Fillet:
1.942
Main:
Thrust Width:
156920, 156920, 161360, 161360, 179450, 179450, 182250, 182250
Casting Numbers:
Comments:
LARGE ROD LARGE ROD
Stroke: 4.125" (104.775 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
145480, 145840, 148350, 156290, 159620
Casting Numbers:
Comments:
SMALL ROD SMALL ROD
C SERIES
4.4882-4.4897" (114.000-114.040 MM)
Stroke: 5.315" (135.001 MM)

Cyl Bore:
2.9906-2.9926" (75.962-76.013 MM)
Rods:
3.8568-3.8588" (97.963-98.014 MM)
Main:
Main:
Thrust Width:
5.1170-5.1190" (129.972-130.023 MM) INSTALL DRY
Rear Seal Diameter:
Comments:
DIESEL, 24 VALVE
CUMMINS
C200
4.438" (112.725 MM)
Cyl Bore:
C(2)
Stroke: 5.3150" (135.001 MM)

2.9916-2.9926" (75.987-76.012 MM)
Rods:
3.8568-3.8588" (97.963-98.014 MM)
Main:
Main:
5.117-5.119" (129.972-130.023 MM)
Rear Seal Diameter:
390562, 3917320
Casting Numbers:
Comments:
C-SERIES DIESEL
CUMMINS
C190
4.438" (112.725 MM)
Cyl Bore:
5.500" (139.7 MM)

7/64
9/64
1.942

Make
Liter
CID
Vin
Model
CUMMINS
CUMMINS
Engine Model
6 Cylinders
10.0
611
L10
Stroke: 5.354" (135.992 MM)

3.1097-3.1107" (78.986-79.012 MM)
Rods:
4.4888-4.4904" (114.016-114.056 MM)
Main:
Main:
Balance: Internal
6.4947-6.4974" (164.965-165.034 MM)
Rear Seal Diameter:
3027931, 3073707, 3819989
Casting Numbers:
Comments:
Year
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
85-90
L10
4.9213" (125.001 MM)

.187-.207" (4.75-5.258 MM)
.226-.246" (5.740-6.248 MM)
1.968-1.972" @ #4
L10, CASTING #S CHANGE WITH CPL NO.
CUMMINS
10.0
611
91->
Stroke: 5.354" (135.992 MM)

3.1097-3.1107" (78.986-79.012 MM)
Rods:
4.4888-4.4904" (114.016-114.056 MM)
Main:
Main:
Balance: Internal
6.4947-6.4974" (164.965-165.034 MM)
Rear Seal Diameter:
3027931, 3073707, 3819989
Casting Numbers:
Comments:
L10, CASTING #S CHANGE WITH CPL NO.
CUMMINS
11.0
661
11.0
672
91-96
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
L10
4.9213" (125.001 MM)

.187-.207" (4.75-5.258 MM)
.226-.246" (5.740-6.248 MM)
1.968-1.972" @ #4
M11
Stroke: 5.790" (147.066 MM)

3.1083-3.1107" (78.951-79.012 MM)
Rods:
4.4888-4.4904" (114.016-114.056 MM)
Main:
Main:
6.4947-6.4974" (164.965-165.034 MM)
Rear Seal Diameter:
3073707
Casting Numbers:
Comments:
TURBO DIESEL, ELECTRONIC FUEL SYSTEM
CUMMINS
L10
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
91-01
M11
4.9213-4.9250" (125.001-125.095 MM)

.187-.207" (4.75-5.258 MM)
.226-.246" (5.740-6.248 MM)
1.9680-1.9720" (49.987-50.088 MM) @ #4
H672
40-68
H672
4.875" (123.825 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
3.1240-3.1250" (79.35-79.375 MM)
.188" (4.775 MM)
Rods:
Rod Fillet:
4.4990-4.5000" (114.275-114.3 MM)
.188
Main:
Main Fillet:
3.003
Main:
Thrust Width:
0-123-1, 10846, 12821, 14401G, 56711, 56712, H56711, H56711, NH0123
Casting Numbers:
Comments:
H672,H-135,H-6,HU-170,NAT'L ASPIRATED,HS6-SUPRCHGD
CUMMINS
11.0
672
NH
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
Comments:
NH180
CUMMINS
12.2
NH180
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
743
NH
NH180
4.875" (123.825 MM)
3/16 (NM)
3/16
3.003
NH 220 SERIES
NH220
5.1250-5.1260" (130.175-130.2 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
3.1240-3.1250" (79.35-79.375 MM)
.188" (4.775 MM)
Rods:
Rod Fillet:
4.4990-4.5000" (114.275-114.3 MM)
.188
Main:
Main Fillet:
3.003
Main:
Thrust Width:
01231, 101109, 10846, 110760, 111786, 123410, 12821, 130186, 14401G, 56711, 56712, H56711,
Casting Numbers:
NH0123
Comments:
NH 220 SERIES
CUMMINS
Stroke:
Rods:
14.0
6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
4.4990-4.5000" (114.275-114.3 MM)

Main:
Main:
3000140, 3024923, 3608833
Casting Numbers:
Comments:
88NT
855
FFC
88NT
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
118
87-89
88NT
5.4998-5.5050" (139.695-139.827 MM)

.172" (4.369 MM)
2.135" (54.229 MM)
.172" (4.369 MM)
3.003" (76.276 MM)

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
6 Cylinders
14.0
855
N14
Stroke: 6.0000" (152.4 MM)

3.4970-3.4995" (88.824-88.887 MM)
Rods:
4.4970-4.5000" (114.224-114.3 MM)
Main:
Main:
3.625-3.626" (92.075-92.1 MM)
5.9975-6.000" (152.337-152.4 MM)
Rear Seal Diameter:
3064291
Casting Numbers:
Comments:
N14
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
91-00
Engine Model
(cont.)
N14
5.4998-5.5050" (139.695-139.827 MM)

.172" (4.369 MM)
.172" (4.369 MM)
3.001-3.005" @ #7
N14
CUMMINS
14.0
855
N14
Stroke: 6.000" (152.4 MM)

3.4970-3.4995" (88.824-88.887 MM)
Rods:
4.4975-4.5000" (114.237-114.3 MM)
Main:
Main:
3.6250-3.6260" (92.075-92.1 MM)
5.9975-6.0000" (152.337-152.4 MM)
Rear Seal Diameter:
3064291
Casting Numbers:
Comments:
WITH O.S. LINER
CUMMINS
14.0
855
N14
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
NH
91-00
N14 O.S. LINER
5.4998-5.5050" (139.695-139.827 MM)

.172" (4.369 MM)
.172" (4.369 MM)
3.001-3.008" (76.225-76.403 MM)
NH230
NH230, NH250
5.4998-5.5050" (139.695-139.827 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
3.1240-3.1250" (79.35-79.375 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
4.4990-4.5000" (114.275-114.3 MM)
.072" (4.369 MM)
Main:
Main Fillet:
Main: Numbers:
101109, 110760, 111789, 121610, 123410, 130186, 135030, 136530, 142770, 142960, 162186, A1320
Casting
Comments:
NH230, NH250
CUMMINS
14.0
855
NT SERIES
88-91
NT SERIES
6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
5.4998-5.5050" (139.695-139.827 MM)

Cyl Bore:
.172" (4.369 MM)
Rod Fillet:
2.135" (54.229 MM)
Rod Width:
4.4990-4.5000" (114.275-114.3 MM)
.172" (4.369 MM)
Main:
Main Fillet:
3.003" (76.276 MM)
Main:
Thrust Width:
101109, 110760, 111789, 121610, 123410, 130186, 135030, 136530, 142770, 142960, 162186, 3000140
Casting Numbers:
Comments:
STD/UP/PRS FT, BIG CAM III-IV, NT SERIES
Stroke:
Rods:
CUMMINS
14.0
855
315
Stroke: 6.0000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4900-4.5000" (114.046-114.3 MM)
Main:
Main:
3608833
Casting Numbers:
Comments:
315/NT SERIES
CUMMINS
14.0
NT SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
855
NT
88-93
NT SERIES
5.4998-5.5050" (139.695-139.827 MM)

.188" (4.775 MM)
.172" (4.369 MM)
3.003" (76.276 MM)
NT855
NT855 SMALL C
5.4998-5.5050" (139.695-139.827 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
3.1240-3.1250" (79.35-79.375 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
4.4990-4.5000" (114.275-114.3 MM)
.172" (4.369 MM)
Main:
Main Fillet:
Main:
101109, 110760, 111789, 121610, 123410, 130186, 135030, 136530, 142770, 142960, 162186
Casting Numbers:
Comments:
NT 855, SMALL CAM
CUMMINS
14.0
855
Stroke: 6.000" (152.4 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
Comments:
NTC400, SEE ALL 14.0L RECORDS
CUMMINS
15.0
NTC
NTC400
Cyl Bore:
912
NTC400
5.4998-5.5050" (139.695-139.827 MM)
600 SERIES
97-05
ISX
5.3937" (137.000 MM)

Stroke: 6.653" (139.000 MM)
Cyl Bore:
3.6999-3.7015" (93.980-94.020 mm)
Rods:
4.9999-5.0007" (126.980-127.020 mm)
Main:
2.1634-2.1673" (54.950-55.050 mm) @ # 4
Main:
Thrust Width:
5.5074-5.5134" (139.890-140.00 MM)
6.4946-6.4974" (164.964-165.035 MM)
Rear Seal Diameter:
3680962
Casting Numbers:
Comments:
DIESEL, 24 VALVE, DOHC, SIGNATURE 600 SERIES STANDARD MAIN BEARING THICKNESS MIN: 3.196
MM [0.126 IN]. MAX: 3.214 MM [0.127 IN]. TIR = .008" (.200 MM) MAX.
119

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
6 Cylinders
15.2
927
NT SERIES
Stroke: 6.500" (165.1 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main: Numbers:
211990
Casting
Comments:
(cont.)
NT SERIES
5.500" (139.7 MM)

.172" (4.369 MM)
.172
Cyl Bore:
Rod Fillet:
Main Fillet:
H, NH, N
CUMMINS
18.8
1,150
K SERIES
Stroke: 6.250" (158.75 MM)

3.9985-4.0000" (101.562-101.6 MM)
Rods:
5.4985-5.5000" (139.662-139.7 MM)
Main:
Main:
4.373-4.375" (111.074-111.125 MM)
5.998-6.000" (152.349-152.4 MM)
Rear Seal Diameter:
206910, 206910, 3003000, 3016096, 32101082
Casting Numbers:
Comments:
K19, K & KT SERIES
CUMMINS
18.8
1,150
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
KTA
Stroke: 6.250" (158.75 MM)

3.9985-4.0000" (101.562-101.6 MM)
Rods:
5.4985-5.5000" (139.662-139.7 MM)
Main:
Main:
4.3730-4.3750" (111.074-111.125 MM)
5.9980-6.0000" (152.349-152.4 MM)
Rear Seal Diameter:
206910
Casting Numbers:
Comments:
SERIAL #S 31101150-31106328
KT1150
6.2495-6.2510" (158.737-158.775 MM)

.240-.263" (6.096-6.68 MM)
.240-.263" (3.096-3.680 MM)
2.374-2.376" @ #6
KTA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
KTA
6.2495-6.2510" (158.737-158.775 MM)
.240-.263" (6.096-6.68 MM)
.240-.263" (6.096-6.680 MM)
2.374-2.376" @ #6
CUMMINS
8 Cylinders
7.7
CUMMINS
470
V8
Stroke: 3.500" (88.9 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
V-8 DIESEL, PHASE 3
Comments:
7.7
CUMMINS
PHASE 3
Cyl Bore:
Rod Fillet:
Main Fillet:
470
PHASE 3
4.625" (117.475 MM)

.141" (3.581 MM)
.141
PHASE 4&5
Stroke: 3.500" (88.9 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main: Numbers:
182360, 2194840, 7194840
Casting
Comments:
Engine Model
PHASE 4&5
4.625" (117.475 MM)

.141" (3.581 MM)
.141
Cyl Bore:
Rod Fillet:
Main Fillet:
V-8 DIESEL, PHASE 4&5
CUMMINS
8.3
504
Stroke: 3.750" (95.25 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
3.125" (79.375 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
Comments:
V-504 DIESEL
CUMMINS
9.1
12.8
V-504
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
555
Stroke: 4.125" (104.775 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
ALL 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
3.125" (79.375 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
Comments:
BIG CAM APPLICATION V/VT-555
CUMMINS
504
V504
4.625" (117.475 MM)
.145-.156" (3.683-3.962 MM)
.145-.156" (3.683-3.962 MM)
1.410-1.412
TRIPLE NICKEL
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
784
V8E-235
Stroke: 4.125" (104.775 MM)

Cyl Bore:
3.1240-3.1250" (79.35-79.375 MM) *
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main Fillet:
Main:
Thrust Width:
142690, 145830, 158370, 161960, 179440, 182240
Casting Numbers:
Comments:
V8E-235, V265, V785 * SMALL ROD = 2.6240-2.6250"
120
V-555,VT-555
4.625" (117.475 MM)

.145-.156" (3.683-3.962 MM)
.145-.156" (3.683-3.962 MM)
1.410-1.412
5.500" (139.7 MM)

.156" (3.962 MM)
.141
1.762
V8E-235

Make
Liter
CID
Vin
Model
Year
CUMMINS
CUMMINS
8 Cylinders
12.9
784
14.8
CUMMINS
15.6
300 SERIES
5.500" (139.7 MM)
Cyl Bore:
903
V903
Stroke: 4.750" (120.65 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
3.7490-3.7500" (95.225-95.25 MM)
Main:
External
Main:
Balance:
208600, 214940
Casting Numbers:
Comments:
V903 TURBO & NON
Stroke:
Rods:
Main:
Main:
V903
Cyl Bore:
Rod Fillet:
Main Fillet:
5.4996-5.5010" (139.69-139.725 MM)

.172" (4.369 MM)
.172
Cyl Bore:
Rod Fillet:
Main Fillet:
5.500" (139.7 MM)

.172" (4.369 MM)
.172
950
5.000" (127. MM)

3.1240-3.1250" (79.35-79.375 MM)
4.2490-4.2500" (107.925-107.95 MM)
CUMMINS
CUMMINS
(cont.)
V8 300
Stroke: 4.125" (104.775 MM)

3.1240-3.1250" (79.35-79.375 MM)
Rods:
V8-300 SERIES
Comments:
CUMMINS
Engine Model
12 Cylinders
23.2
1414
NVH1414
NVH1414
3.7490-3.7500" (95.225-95.25 MM)

Rods:
NVH1414
Comments:
CUMMINS
24.4
1,486
VT1486
Stroke: 6.000" (152.4 MM)

3.7490-3.7500" (95.225-95.25 MM)
Rods:
4.9990-5.0000" (126.975-127. MM)
Main:
Main:
143140, 146460
Casting Numbers:
Comments:
VT1486
CUMMINS
28.0
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1,710
V12
Stroke: 6.000" (152.4 MM)

3.7485-3.7500" (95.212-95.25 MM)
Rods:
5.7485-5.7500" (146.012-146.05 MM)
Main:
Main:
190620, 204640, 217310, 3027158
Casting Numbers:
Comments:
V-1710, PHASE 3&4
CUMMINS
28.0
1,710
Stroke: 6.000" (152.4 MM)

3.7490-3.7500" (95.225-95.25 MM)
Rods:
4.9990-5.0000" (126.975-127. MM)
Main:
Main:
143140, 146460, 204640, 217310
Casting Numbers:
Comments:
VT-1710, PHASE 1&2
CUMMINS
38.0
V1710
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
VTA
CUSHMAN
CUSHMAN
CUSHMAN
V1710,PHASE 1
5.500" (139.7 MM)

.188" (4.775 MM)
.188" (4.775 MM)
3.0030" or 2.700-2.703" @ #7
KT & K38 SERIE
6.2495-6.2510" (158.737-158.775 MM)

.240-.263" (6.096-6.68 MM)
.240-.263" (6.096-6.680 MM)
2.374-2.376" @ #6
1 Cylinder
0.2
12
Stroke: 2.750" (69.850 MM)

1.1865" (30.137 MM)
Rods:
GAS
Comments:
Stroke: 2.750" (69.850 MM)

1.1865" (30.137 MM)
Rods:
Comments:
GAS
V1710,PHASE 3
KT SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
VT1486
5.500" (139.7 MM)

.188" (4.775 MM)
.188" (4.775 MM)
3.003" or 2.700-2.703" @ # 7
VT1710
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2,300
Stroke: 6.2589" (158.976 MM)

4.2470-4.2500" (107.874-107.95 MM)
Rods:
6.4975-6.5000" (165.037-165.1 MM)
Main:
Main:
4.373-4.375" (111.074-111.125 MM)
7.248-7.250" (184.099-184.15 MM)
Rear Seal Diameter:
Comments:
K38 & KT SERIES
60-70
5.125" (130.175 MM)

.188" (4.775 MM)
.188
3.003 or 2.700-2.703" @ # 7
M6
0.2
15
M6
2.375" (60.325 MM)
Cyl Bore:
M7
Cyl Bore:
121
M7
2.625" (66.675 MM)

Make
Liter
CID
Vin
Model
Year
CUSHMAN
CUSHMAN
1 Cylinder
0.3
18
M8
2.875" (73.025 MM)
Cyl Bore:
0.3
19
M9
Stroke: 2.750" (69.850 MM)

1.1865" (30.137 MM)
Rods:
Comments:
GAS
M9
3.000" (76.200 MM)
Cyl Bore:
DAEWOO
DAEWOO
4 Cylinders
1.6
98
LANOS
Stroke: 3.210" (81.500 MM)

1.6910-1.6920" (42.971-42.987 MM)
Rods:
2.1640-2.1650" (54.982-54.994 MM)
Main:
Main:
DOHC, MFI, D-TEC, LANOS
Comments:
DAEWOO
2.0
122
2.2
DAEWOO
3.3
NUBIRA
134
LEGANZA
199
492
DB33A
D1146
11.1
674
DE12T
14.6
97-03
DE12T
892
DE12T
4.8425-4.8434" (123.000-123.023 MM)
D2848T
D2848T
5.0394" (128.000 MM)
Cyl Bore:
DAIHATSU
3 Cylinders
0.7
42
430447
Stroke: 2.520" (64.000 MM)

Cyl Bore:
1.4557-1.4567" (36.976-37.000 MM)
Rods:
1.6525-1.6535" (41.976-42.000 MM)
Main:
Main Fillet:
Main:
GAS, OHV, BRIGGS & STRATTON, TORO LAWNMOWER
Comments:
DAIHATSU
D1146
4.370" (111.000 MM)
Cyl Bore:
Stroke: 7.4542" (189.337 MM)

3.5425-3.5433" (89.980-90.000 MM)
Rods:
4.0937-4.0945" (103.980-104.000 MM)
Main:
Main:
Comments:
DIESEL, DAEWOO / MAN ENGINE
DAIHATSU
T22SED
4.0160-4.0170" (102.021-102.040 MM)
Stroke: 6.1024" (155.000 MM)

Cyl Bore:
3.2664-3.2672" (82.966-82.988 MM)
Rods:
3.7782-3.7790" (95.966-95.988 MM)
Main:
Main:
Comments:
GENERATOR DIESEL, TURBO, DIR INJ, ALSO P126TI
DAEWOO
TC20N
6 Cylinders
8.1
Stroke: 5.472" (139.000 MM)

2.7941-2.7949" (70.971-70.990 MM)
Rods:
3.3057-3.3066" (83.966-83.988 MM)
Main:
Main:
DIESEL, DIR INJ, WATER COOLED
Comments:
DAEWOO
99-02
DB33A
Cyl Bore:
DAEWOO
DAEWOO
99-02
3.3840-3.3860" (85.975-86.025 MM)
Cyl Bore:
Stroke: 3.9370" (100.000 MM)

2.5170-2.5175" (63.932-63.944 MM)
Rods:
2.9887-2.9892" (75.913-75.925 MM)
Main:
Main:
Comments:
DIESEL, OHV, WATER-COOLED, DIR INJ
A16D
3.3856-3.4049" (85.995-86.485 MM)
Cyl Bore:
Stroke: 3.720" (94.600 MM)

1.9283-1.9286" (48.981-48.987 MM)
Rods:
2.2824-2.2832" (57.974-57.995 MM)
Main:
Main:
Comments:
DOHC, MFI, D-TEC, LEGANZA
99-02
3.110" (79.000 MM)
Cyl Bore:
Stroke: 3.380" (86.000 MM)

1.9283-1.9286" (48.981-48.987 MM)
Rods:
2.2824-2.2832" (57.974-57.995 MM)
Main:
Main:
Comments:
DOHC, MFI, D-TEC, NUBIRA
DAEWOO
(cont.)
M8
Stroke: 2.750" (69.850 MM)

1.1865" (30.137 MM)
Rods:
GAS
Comments:
CUSHMAN
Engine Model
1.0
58
.0008-.0017" (.020-.044 MM)
580447
Stroke: 3.070" (78.000 MM)

Cyl Bore:
1.4557-1.4567" (36.976-37.000 MM)
Rods:
1.6525-1.6535" (41.976-42.000 MM)
Main:
Main:
Comments:
GAS, OHV, BRIGGS & STRATTON, TORO LAWNMOWER
122
430447
2.6770-2.6783" (68.000-68.030 MM)
2.834" (72.000 MM)
580447

Make
Liter
CID
Vin
Model
Year
DAIHATSU
DAIHATSU
3 Cylinders
1.0
61
CB
Stroke: 2.874" (73. MM)

1.5740-1.5748" (39.98-40. MM)
Rods:
1.6528-1.6532" (41.981-41.991 MM)
Main:
Main:
MFI, CHARADE
Comments:
CHARADE
4 Cylinders
1.3
79
89-92
2.990" (75.946 MM)
Cyl Bore:
1.6
97
ROCKY
Stroke: 3.510" (89.154 MM)

Cyl Bore:
1.7707-1.7716" (44.976-44.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Thrust Width:
Comments:
ROCKY, USES OIL COOLER * O/S THRUST WASHERS AVLBL
DAIHATSU
1.6
98
Stroke: 3.510" (89.154 MM)

1.7706" (44.973 MM)
Rods:
1.9675" (49.975 MM)
Main:
Main:
Comments:
MFI
* @ #3
HD
90-92
2.990" (75.946 MM)
Cyl Bore:
2 Cylinders
1.7
106
Stroke: 4.500" (114.3 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
5116022
Casting Numbers:
Comments:
DDC
2-53 2V
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.501-1.503
2-53 2V
DIESEL, 2 VALVE THRUST WASHER THKNS .1205-.1220
1.7
106
2-53 4V
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
Thrust Width:
5116022
Casting Numbers:
Comments:
DIESEL, 4 VALVE THRUST WASHER THKNS .1205-.1220
DDC
90-95
2.9920-2.9930" (75.997-76.022 MM)
DDC
DDC
88-92
@ #3
Thrust Width:
Stroke: 2.810" (71.374 MM)

1.7706" (44.973 MM)
Rods:
1.9675" (49.975 MM)
Main:
Main:
MFI
Comments:
DAIHATSU
(cont.)
2.992" (75.997 MM)
Cyl Bore:
DAIHATSU
DAIHATSU
Engine Model
2.3
142
2-53 4V
3.875" (98.425 MM)
1.501-1.503
2-71
2-71
4.2489-2.5011" (107.922-63.528 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
2-71, 5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
4 VLV, TRUNK TYPE PISTON
DDC
2.3
142
2-71 2V
2-71 2V
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
DDC
2.3
142
2-71 CROSS-HEA
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:
Rear Seal Diameter:
5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
4 VLV, CROSS-HEAD TYPE PISTON
123
2-71 CROSS-HEA

Make
Liter
CID
Vin
Model
DDC
Year
2 Cylinders
2.3
DDC
142
Engine Model
(cont.)
2-71E
2-71E
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
2.3
DDC
142
2-71M
2-71M
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
2.3
DDC
142
2-71N
2-71N
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
1/8 (.125)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
1/8 (.125)
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
2.3
DDC
142
2-71T
2-71T
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:
Rear Seal Diameter:
5132942, 5154184, 5154929, 5155255, 5173998, 5179067, 5184214, 5773990
Casting Numbers:
Comments:
4 VLV, TURBO, TRUNK TYPE PISTON
DDC
3 Cylinders
0.9
DDC
53
53
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
Thrust Width:
51103318, 5116022, 5116029, 5181377, 6116028
Casting Numbers:
Comments:
DDC
53
3.8752-3.8767" (98.43-98.468 MM)
1.501-1.503
2, 3, 4 CYLS.
2.1
127
D703L
D703L
3.7008-3.7016" (94.000-94.020 MM)

Stroke: 3.937" (100.000 MM)
Cyl Bore:
2.1236-2.1242" (53.940-53.955 MM)
Rods:
FRONT 2.4797-2.4803" (62.985-63.000 MM)
Main 1:
CENTR 2.4805-2.4811" (63.005-63.020 MM)
Main:
Main 2:
REAR 2.7551-2.7559" (69.980-70.000 MM)
Main 3:
Comments:
NON-TURBO & D703LT TURBO, DIRECT INJECTION * OIL CLEARANCE: FRONT=.0017-.0041",
CENTER=.0012-.0035", REAR=.0020-.0033". THRUST WASHER THKNS STD=.091-.093".
DDC
2.6
159
3-53
3-53
3.875" (98.425 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.501-1.503
Main:
Thrust Width:
6116028
Casting Numbers:
Comments:
3-53 SERIES DIESEL, 2 + 4 VALVE HEADS THRUST WASHER THKNS .1205-.1220, HAVE SEEN
CRANKSHAFT CASTING NUMBER # 5106454
DDC
3.5
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:
Rear Seal Diameter:
5154926, 5184214
Casting Numbers:
Comments:
213
3-71
Cyl Bore:
Rod Fillet:
Main Fillet:
124
3-71 4V
4.250" (107.95 MM)
.125" (3.175 MM)
.125

Make
Liter
CID
Vin
Model
Year
DDC
DDC
3 Cylinders
3.5
213
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154926, 5184214
Casting Numbers:
Comments:
DDC
3.5
213
3.5
3.5
3.5
213
3.5
3-71E
213
3-71M
3-71N
213
3-71N
4.250" (107.95 MM)
.125" (3.175 MM)
.125
3-71T
3-71T
4.250" (107.95 MM)
.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
DDC
DDC
3-71M
4.250" (107.95 MM)
.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154926, 5184214
Casting Numbers:
Comments:
TURBO, 4 VLV, TRUNK TYPE PISTON
3-71E
4.250" (107.95 MM)
.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
213
3-71 CROSS-HEA
4.250" (107.95 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154926, 5184214
Casting Numbers:
Comments:
DDC
3-71 CROSS-HEA
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:
Rear Seal Diameter:
5154926, 5184214
Casting Numbers:
Comments:
DDC
3-71 2V
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154926, 5184214
Casting Numbers:
Comments:
DDC
(cont.)
4.250" (107.95 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154926, 5184214
Casting Numbers:
Comments:
DDC
3-71 2V
Engine Model
4 Cylinders
2.8
169
D704L
D704L
3.7008-3.7016" (94.000-94.020 MM)

Stroke: 3.937" (100.000 MM)
Cyl Bore:
2.1236-2.1242" (53.940-53.955 MM)
Rods:
FRONT 2.4797-2.4803" (62.985-63.000 MM)
Main 1:
CENTR 2.4805-2.4811" (63.005-63.020 MM)
Main 2:
REAR 2.7551-2.7559" (69.980-70.000 MM)
Main 3:
NON-TURBO & D704LT TURBO, DIRECT INJECTION * OIL CLEARANCE: FRONT=.0017-.0041",
Comments:
CENTER=.0012-.0035", REAR=.0020-.0033". THRUST WASHER THICKNESS STD=.091-.093".
DDC
3.5
212
4-53
3.875" (98.425 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
51103318, 5116029, 5181377
Casting Numbers:
Comments:
4-53 DIESEL, 2 + 4 VALVE HEADS THRUST WASHER THKNS .1205-.1220
125
4-53

Make
Liter
CID
Vin
Model
Year
DDC
DDC
Stroke:
Rods:
4 Cylinders
4.2
259
5.110" (130.000 MM)

2.7557-2.7565" (69.995-70.015 MM)
3.3854-3.3862" (85.990-86.010 MM)

Main:
Main:
4.25L NON-EGR, MERCEDES ENGINE
Comments:
DDC
4.7
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
DDC
4.7
4.7
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
DDC
4.7
DDC
4.7
DDC
4.7
4.7
4-71 CROSS-HEA
4-71E
4-71E
4-71M
4-71M
4.250" (107.95 MM)
.125" (3.175 MM)
.125
4-71N
4-71N
4.250" (107.95 MM)
.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
4-71T
126
4-71 CROSS-HEA
4.250" (107.95 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
Cyl Bore:
Rod Fillet:
Main Fillet:
4-71 4VALVE
4.250" (107.95 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
TURBO, 4 VLV, TRUNK TYPE PISTON
4-71 2VALVE
4.250" (107.95 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:
Rear Seal Diameter:
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
DDC
4-71 4VALVE
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
MBE 900
4.250" (107.95 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
04-05
(cont.)
4.0200" (102.000 MM)

.098-.118" (2.500-3.000 MM)
JOURNAL HARDNESS 52 HRC MINIMUM.
.098-.118" (2.500-3.000 MM)
1.2205-1.2229" (31.000-31.062 MM)
4-71 2VALVE
Cyl Bore:
Rod Fillet:
Main Fillet:
284
Stroke: 5.000" (127. MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154701, 5182942, N5154701, U3967
Casting Numbers:
Comments:
DDC
MBE 900
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Engine Model
4-71T
4.250" (107.95 MM)
.125" (3.175 MM)
.125

Make
Liter
CID
Vin
Model
Year
DDC
DDC
4 Cylinders
8.5
518
50 SERIES
92-05
Engine Model
(cont.)
50 SERIES
5.118" (129.997 MM)

Stroke: 5.472" (138.989 MM)
Cyl Bore:
3.3450-3.3460" (84.963-84.988 MM)
.226" (5.74 MM)
Rods:
Rod Fillet:
4.9200-4.9210" (124.968-124.993 MM)
.148
Main:
Main Fillet:
1.947-1.950" (49.450-49.550 MM)
Main:
Thrust Width:
5.186-5.188" (131.724-131.775 MM)
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
FOUR STROKE, OHC 8.5L ** MINIMUM OF 6750 LBS WHEN PRESSING GEAR ONTO CRANK THRUST
Comments:
WASHER THKNS .137-.140, O.S. MAIN BRG AVLBLIN .020 & .040
DDC
DDC
6 Cylinders
4.2
254
D706LT
D706LT
3.7008-3.7016" (94.000-94.020 MM)

Stroke: 3.937" (100.000 MM)
Cyl Bore:
2.1236-2.1242" (53.940-53.955 MM)
Rods:
FRONT 2.4797-2.4803" (62.985-63.000 MM)
Main 1:
CENTR 2.4805-2.4811" (63.005-63.020 MM)
Main 2:
REAR 2.7551-2.7559" (69.980-70.000 MM)
Main 3:
TURBO, DIRECT INJECTION * OIL CLEARANCE: FRONT=.0017-.0041", CENTER=.0012-.0035",
Comments:
REAR=.0020-.0033". THRUST WASHER THICKNESS STD=.091-.093".
DDC
5.2
318
Stroke: 4.500" (114.3 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
5140079, A399
Casting Numbers:
Comments:
6V-53 TURBO THRUST WASHER THKNS .1205-.1220
DDC
Stroke:
Rods:
6.4
3.3854-3.3862" (85.990-86.010 MM)

Main:
Main:
Comments:
6.39L NON-EGR, MERCEDES ENGINE
7.0
6V-53
3.875" (98.425 MM)
Thrust Width:
1.501-1.503
389
5.1100" (130.000 MM)

2.7557-2.7565" (69.995-70.015 MM)
DDC
6V-53
Cyl Bore:
MBE 900
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
426
04-05
MBE 900
4.0200" (102.000 MM)

.098-.118" (2.500-3.000 MM)
JOURNAL HARDNESS 52 HRC MINIMUM
.098-.118" (2.500-3.000 MM)
1.2205-1.2229" (31.000-31.062 MM)
6-71
6-71 4V
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5106331, 5154256, 5154701B, 5155255, 5160034, 5173988, 5179067, 5182940, 5193990
Casting Numbers:
Comments:
DDC
7.0
426
6-71 2V
6-71 2V
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154256, 5154701B, 5155255, 5160034, 5173988, 5173990, 5173998, 5179067, 5182940
Casting Numbers:
Comments:
DDC
7.0
426
6-71 CROSS-HEA
6-71 CROSS-HEA
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:
Rear Seal Diameter:
5154256, 5154701B, 5155255, 5160034, 5173988, 5173998, 5179067, 5182940, 5193990
Casting Numbers:
Comments:
DDC
7.0
426
6-71E
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154256, 5154701B, 5155255, 5160034, 5173988, 5173998, 5179067, 5182940, 5193990
Casting Numbers:
Comments:
127
6-71E

Make
Liter
CID
Vin
Model
Year
DDC
DDC
6 Cylinders
7.0
426
6-71M
Engine Model
(cont.)
6-71M
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154256, 5154701B, 5155255, 5160034, 5173988, 5173998, 5179067, 5182940, 5193990
Casting Numbers:
Comments:
DDC
7.0
426
6-71N
6-71N
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154256, 5154701B, 5155255, 5160034, 5173988, 5173998, 5179067, 5182940, 5193990
Casting Numbers:
Comments:
DDC
7.0
426
6-71T
6-71T TURBO
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
4.6870" (119.05 MM)
Main:Seal Diameter:
Rear
5154256, 5154701B, 5155255, 5160034, 5173988, 5173998, 5179067, 5182940, 5193990
Casting Numbers:
Comments:
4 VLV, TURBO, TRUNK TYPE PISTON
DDC
7.0
426
6V-71
Stroke: 5.000" (127. MM)

Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
Rods:
Rod Fillet:
4.4985-4.5002" (114.262-114.305 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
5117906, 5119906, 5146572
Casting Numbers:
Comments:
4 VLV, TRUNK TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
7.0
426
6V-71 2 VALVE
Stroke: 5.000" (127. MM)

Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
Rods:
Rod Fillet:
4.4985-4.5002" (114.262-114.305 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
5117906, 5119906
Casting Numbers:
Comments:
2VLV, TRUNK TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
7.0
426
7.0
426
6V-71 2 VALVE
4.250" (107.95 MM)

.125" (3.175 MM)
.125
1.5030
6V-71 CROSSHEA
Stroke: 5.000" (127. MM)

Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
Rods:
Rod Fillet:
4.4985-1.5002" (114.262-38.105 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
Comments:
4 VLV, CROSS-HEAD REAR TIMING GEAR AREA=5.248-5.250
DDC
6V-71
4.250" (107.95 MM)
.125" (3.175 MM)
.125
1.5030
6V-71 CROSSHEA
4.250" (107.95 MM)

.125" (3.175 MM)
.125
1.5030
6V-71T
6V-71T TURBO
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
4.4985-4.5002" (114.262-114.305 MM)
.125
Main:
Main Fillet:
1.5030
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
5117906, 5119906
Casting Numbers:
Comments:
4 VLV, TURBO, TRUNK TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
7.0
426
6V-71T CROSSHD
4.250" (107.95 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
1.5030
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
Comments:
4 VLV, TURBO, CROSS-HEAD TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
128
6V-71T CROSSH

Make
Liter
CID
Vin
Model
Year
DDC
DDC
Stroke:
Rods:
6 Cylinders
7.6
466
4.680" (119.000 MM)

3.1494-3.1506" (79.995-80.025 MM)
40 SERIES
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
98-02
40 SERIES
4.5895-4.5905" (116.573-116.599 MM)

.225" (5.715 MM)
1.250-1.260" (31.750-32.004 MM)
.225" (5.715 MM)
1.353-1.355" @ #7
3.5344-3.5356" (89.774-89.804 MM)

Main:
Main:
Balance: Internal
5.550" (140.970 MM)
Rear Seal Diameter:
NAVISTAR ELECTRONIC DIESEL,4.590 BORE,4.680 STROKE THRUST BEARING LENGTH 1.338"
Comments:
DDC
7.6
466
466E
Stroke: 5.3504" (135.900 MM)

Cyl Bore:
3.1494-3.1506" (79.995-80.025 MM)
Rods:
Rod Fillet:
3.5344-3.5356" (89.774-89.804 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
Comments:
NAVISTAR ELECTRONIC DIESEL,4.300 BORE,5.350 STROKE
DDC
Stroke:
Rods:
8.7
530
5.350" (135.890 MM)

3.1494-3.1506" (79.995-80.025 MM)
94-99
40 SERIES
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
466E
4.3005-4.3015" (109.233-109.258 MM)

.225" (5.715 MM)
.225" (5.715 MM)
1.710" @ #7
98-02
40 SERIES
4.5895-4.5905" (116.573-116.599 MM)

.225" (5.715 MM)
1.250-1.260" (31.750-32.004 MM)
.225" (5.715 MM)
1.353-1.355" @ #7
3.5344-3.5356" (89.774-89.804 MM)

Main:
Main:
Balance: Internal
5.550" (140.970 MM)
Rear Seal Diameter:
Comments:
NAVISTAR ELECTRONIC DIESEL,4.590 BORE,5.350 STROKE THRUST BRG LENGTH=1.338"
DDC
Stroke:
Rods:
9.1
552
5.000" (127. MM)

2.9990-3.0000" (76.175-76.2 MM)
4.4990-4.5000" (114.275-114.3 MM)

Main:
Main:
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
5144862
Casting Numbers:
Comments:
6V-92 & 6VF-92
DDC
10.8
6V-92
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
6V-92
4.840" (122.936 MM)
.100-.130" (2.540-3.302 mm)
2.648-2.662" (67.259-67.615 MM)
.100-.130" (2.540-3.302 mm)
1.499-1.503" (38.075-38.176 mm)
660
6-110
517497
Casting Numbers:
Comments:
6-110 ENGINE, 2 & 4 VALVE HEADS
DDC
11.1
677
60 SERIES
86-04
60 SERIES 11.1
5.1180" (129.997 MM)

Stroke: 5.472" (138.989 MM)
Cyl Bore:
3.3450-3.3460" (84.963-84.988 MM)
.226" (5.74 MM) SEE TB1632
Rods:
Rod Fillet:
4.9200-4.9210" (124.968-124.993 MM)
.148" (3.759 MM) SEE TB 1632
Main:
Main Fillet:
1.947-1.950" @ #6
Main:
Thrust Width:
5.186-5.188" (131.724-131.775 MM)
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
8929238, 8929413
Casting Numbers:
Comments:
OHC, DIESEL, FOUR STROKE THRUST WASHER THK:.137-.140, O.S. MAIN BRGS: .020 & .040
DDC
12.7
775
60 SERIES
86-04
60 SERIES 12.7
5.1180" (129.997 MM)

Stroke: 6.299" (159.995 MM)
Cyl Bore:
3.3450-3.3460" (84.963-84.988 MM)
.226" (5.74 MM) SEE TB1632
Rods:
Rod Fillet:
4.9200-4.9210" (124.968-124.993 MM)
.148" (3.759 MM) SEE TB 1632
Main:
Main Fillet:
1.947-1.950" @ #6
Main:
Thrust Width:
5.186-5.188" (131.724-131.775 MM)
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
23527965, 8929239
Casting Numbers:
Comments:
OHC, DIESEL, FOUR STROKE T/W THICKNESS .137-.140" ----- O.S. MAIN BEARINGS .020 & .040"
DDC
DDC
8 Cylinders
7.0
424
Stroke: 4.500" (114.3 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
5116030
Casting Numbers:
Comments:
8V-53
8V-53
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.501-1.503
8V-53N DIESEL THRUST WASHER THKNS .1205-.1220
129

Make
Liter
CID
Vin
Model
Year
DDC
DDC
8 Cylinders
8.2
500
FUEL PINCHER
Stroke: 4.409" (111.989 MM)

2.7549-2.7559" (69.974-70. MM)
Rods:
3.9360-3.9370" (99.974-100. MM)
Main:
Main:
Balance: External
5.187" (131.75 MM)
Rear Seal Diameter:
8922124
Casting Numbers:
Comments:
DDC
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
FUEL PINCHER
4.2520-4.2546" (108.001-108.067 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.258 @ #4
4 STROKE DIESEL SEE TB 2015, 2 DIFF CRANKS WITH SAME CASTING NUMBER USED FOR THIS
ENGINE. THRUST BRG LGTH 1.250, O.S. BRGS AVLBL
8.2
500
FUEL PINCHER
80-89
FUEL PINCHER
4.2520-4.2546" (108.001-108.067 MM)

Stroke: 4.409" (111.989 MM)
Cyl Bore:
2.7549-2.7559" (69.974-70. MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
3.9360-3.9370" (99.974-100. MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.258 @ #4
Main:
Thrust Width:
Balance: External
5.187" (131.75 MM)
Rear Seal Diameter:
8922124
Casting Numbers:
Comments:
4 STROKE DIESEL SEE TB 2015 - 2 DIFF CRANKS USED WITH SAME CASTING NUMBER.DO NOT
INTERCHANGE! THRUST BRG LGTH 1.250, O.S. BRGS AVLBL
DDC
9.3
568
8V-71
Stroke: 5.000" (127. MM)

Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
Rods:
Rod Fillet:
4.4985-4.5002" (114.262-114.305 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
5117908, 5119906, 5144867
Casting Numbers:
Comments:
4 VLV, TRUNK TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
9.3
568
8V-71
4.250" (107.95 MM)
.125" (3.175 MM)
.125
1.5030
8V-71 (2)
8V-71 LONG PO
4.2489-4.2511" (107.922-107.978 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
4.4985-4.5002" (114.262-114.305 MM)
.125
Main:
Main Fillet:
1.5030
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
Comments:
4 VLV, LONG PORT LINER, TRUNK TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
9.3
568
8V-71 CROSSHEA
8V-71 CROSSHEA
4.2489-4.2511" (107.922-107.978 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
4.4985-1.5002" (114.262-38.105 MM)
.125
Main:
Main Fillet:
1.5030
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
Comments:
4 VLV, CROSS-HEAD TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
9.3
568
8V-71 TURBO
8V-71T TRUNK
4.2489-4.2511" (107.922-107.978 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.9985-3.0002" (76.162-76.205 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
4.4985-4.5002" (114.262-114.305 MM)
.125
Main:
Main Fillet:
1.5030
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
Comments:
4 VLV, TURBO, TRUNK TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
DDC
9.3
568
8V-71T CROSSHD
8V-71T CROSSH
4.2489-4.2511" (107.922-107.978 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7490-2.7500" (69.825-69.85 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.125
Main:
Main Fillet:
1.5030
Main:
Thrust Width:
4.6870" (119.05 MM)
Rear Seal Diameter:
Comments:
4 VLV, TURBO, CROSS-HEAD TYPE PISTON REAR TIMING GEAR AREA=5.248-5.250
130

Make
Liter
CID
Vin
Model
Year
DDC
8 Cylinders
12.1
DDC
Stroke:
Rods:
736
5.000" (127. MM)

2.9990-3.0000" (76.175-76.2 MM)
4.4990-4.5000" (114.275-114.3 MM)

Main:
Main:
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
5101588
Casting Numbers:
Comments:
DDC
8V-92
4.8390-4.8415" (122.911-122.974 MM)
.100-.130" (2.540-3.302 MM)
2.648-2.662" (67.259-67.615 MM)
.100-.130" (2.540-3.302 MM)
1.499-1.503" (38.075-38.176 MM)
8V-92 SERIES DIESEL
12 Cylinders
14.0
852
5.000" (127. MM)

2.9985-3.002" (76.162-76.251 MM)
4.4985-4.5002" (114.262-114.305 MM)

Main:
Main:
4.685-4.687" (118.999-119.05 MM)
Rear Seal Diameter:
12V-71
Comments:
DDC
Rods:
18.1
12V-71
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
1,104
2.9990-3.0000" (76.175-76.200 MM)
4.4990-4.5000" (114.275-114.300 MM)

Main:
Main:
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
Comments:
12V-92
Rods:
12V-92
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
12V-92
.100-.130" (2.540-3.302 MM)
2.648-2.662" (67.259-67.615 MM)
.100-.130" (2.540-3.302 MM)
1.499-1.503" (38.075-38.176 MM)
16 Cylinders
24.1
1472
2.9985-3.0002" (76.162-76.205 MM)
4.4985-4.5002" (114.262-114.305 MM)

Main:
Main:
5.186-5.188" (131.724-131.775 MM)
Rear Seal Diameter:
16V-92
Comments:
DDC
39.1
16V-92
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2,384
Stroke: 5.750" (146.05 MM)

3.8730-3.8740" (98.374-98.4 MM)
Rods:
4.8720-4.8730" (123.749-123.774 MM)
Main:
5.999-6.000" (152.375-152.4 MM)
Main:
Rear Seal Diameter:
5145942
Casting Numbers:
Comments:
16V-149
16V-92
4.8390-4.8415" (122.911-122.974 MM)

.100-.130" (2.54-3.302 MM)
2.648-2.662" (67.259-67.615 MM)
.100-.130" (2.540-3.302 MM)
1.499-1.503
16V-149
Cyl Bore:
16V-149
5.7488-5.7513" (146.02-146.083 MM)
DEUTZ
DEUTZ
12V-71
4.2489-4.2511" (107.922-107.978 MM)

.100-.130" (2.54-3.302 MM)
2.648-2.662" (67.259-67.615 MM)
.100-.130
1.501-1.503
DDC
DDC
(cont.)
8V-92
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
DDC
Stroke:
Rods:
Engine Model
1 Cylinder
0.4
25
F1L 208 D
F1L208D
3.150" (80.01 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.5742-1.5748" (39.985-40. MM)
Rods:
1.8502-1.8508" (46.995-47.01 MM)
Main:
Main:
DIESEL, 4 STROKE, DIR INJ, AIR COOLED STD THRUST WASHER THKNS .077-.079
Comments:
DEUTZ
0.7
41
F1L 210 D
F1L210D
3.740" (94.996 MM)

Stroke: 3.740" (94.996 MM)
Cyl Bore:
2.0443-2.0450" (51.925-51.943 MM)
Rods:
2.1651-2.1656" (54.994-55.006 MM)
Main:
Main:
Comments:
DIESEL, FOUR STROKE, AIR COOLED, DIRECT INJ THRUST WASHER THKNS STD .077-.079
DEUTZ
DEUTZ
Stroke:
Rods:
2 Cylinders
1.4
83
4.1338" (104.999 MM)

2.1642-2.1650" (54.971-54.991 MM)
2.7547-2.7555" (69.969-69.99 MM)

Main:
Main:
FOUR STROKE DIESEL, OIL COOLED
Comments:
F2L 1011
Cyl Bore:
3.5827" (91.001 MM)
Rod Width:
1.2205" (31.001 MM)
Thrust Width:
1.3780-1.3795
131
F2L1011

Make
Liter
CID
Vin
Model
Year
DEUTZ
DEUTZ
2 Cylinders
1.6
95
DEUTZ
1.7
101
DEUTZ
1.7
DEUTZ
Stroke:
Rods:
1.9
101
115
1.9
2FL-511
3.9370" (100. MM)
F2L912
115
4.724" (119.99 MM)

2.3599-2.3606" (59.941-59.959 MM)
2FL-411
2FL-511
Cyl Bore:
4.724" (119.99 MM)

2.3599-2.3606" (59.941-59.959 MM)
DEUTZ
1.378-1.380" (35.000-35.040 MM)
3.9370" (100. MM)
Cyl Bore:
Rod Fillet:
Rod Width:
2.4398-2.4405" (61.971-61.989 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL, 4 STROKE, DIR INJ INFO ON FL911 THE SAME
Stroke:
Rods:
F2L2011
3.7008-3.7016" (94.000-94.020 MM)
2FL-411
Cyl Bore:
Stroke: 4.1340" (105.004 MM)

2.0450-2.0456" (51.943-51.958 MM)
Rods:
2.5179-2.5185" (63.955-63.97 MM)
Main 1:
CENTR 2.3611-2.3618" (59.972-59.99 MM)
Main:
Main 2:
23
Casting Numbers:
Comments:
2 CYL DIESEL 2 CYL. DIESEL
(cont.)
F2L 2011
Stroke: 4.409" (112.000 MM)

Cyl Bore:
2.1642-2.1650" (54.970-54.990 MM)
Rods:
2.7547-2.7555" (69.970-69.990 MM)
Main:
Main:
Thrust Width:
DIESEL,DIR INJ,4 STROKE, & F2M 2011 (NO COOL SYST)
Comments:
Stroke: 4.1340" (105.004 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
2.4398-2.4405" (61.971-61.989 MM)
Main 1:
CENTR 2.3610-2.3618" (59.969-59.99 MM)
Main:
Main 2:
Comments:
2 CYL DIESEL 2 CYL. DIESEL
Engine Model
F2L912
3.937-3.938" (100.-100.025 MM)

.169-.177" (4.293-4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.169-.177
1.457-1.460
F2L912/W
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
F2L912W
3.937-3.938" (100.-100.025 MM)

.169-.177" (4.293-4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.169-.177
1.457-1.458" (37.008-37.033 MM) *
2.4398-2.4405" (61.971-61.989 MM)

Main:
Main:
T290
Casting Numbers:
Comments:
DIESEL, 4 STROKE, DIR INJ * 8 OVERSIZE THRUST BEARINGS AVAILABLE
DEUTZ
DEUTZ
Stroke:
Rods:
3 Cylinders
1.4
83
4.1338" (104.999 MM)

2.1642-2.1650" (54.971-54.991 MM)
2.7547-2.7555" (69.969-69.99 MM)

Main:
Main:
DIESEL, 4 STROKE, OIL COOLED
Comments:
DEUTZ
2.3
F3L 1011
Cyl Bore:
3.5827" (91.001 MM)
Rod Width:
1.2205" (31.001 MM)
Thrust Width:
1.3780-1.3795"
142
BF3L 2011
Stroke: 4.409" (112.000 MM)

Cyl Bore:
2.1642-2.1650" (54.970-54.990 MM)
Rods:
2.7547-2.7555" (69.970-69.990 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL,DIR INJ,4 STROKE, & BF3M 2001 (NO COOL SYS)
DEUTZ
2.3
142
DEUTZ
2.8
172
4.724" (119.99 MM)

2.3599-2.3606" (59.941-59.959 MM)
2.7548-2.7555" (69.972-69.99 MM)

Main:
Main:
Comments:
DIESEL,DIR INJ,F3L912W, ALLIS MODEL 6240,6250
BF3L2011
3.7008-3.7016" (94.000-94.020 MM)
1.378-1.380" (35.000-35.040 MM)
F3L 2011
Stroke: 4.409" (112.000 MM)

Cyl Bore:
2.1642-2.1650" (54.970-54.990 MM)
Rods:
2.7547-2.7555" (69.970-69.990 MM)
Main:
Main:
Thrust Width:
Comments:
Stroke:
Rods:
F3L1011
F3L2011
3.7008-3.7016" (94.000-94.020 MM)
1.378-1.380" (35.000-35.040 MM)
F3L912
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
132
3.9370-3.9380" (100.-100.025 MM)

.169-.177" (4.293-4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.169-.177
1.457-1.458" (37.000-37.025 MM)
F3L912

Make
Liter
CID
Vin
Model
Year
DEUTZ
DEUTZ
Stroke:
Rods:
3 Cylinders
2.8
172
4.921" (124.993 MM)

2.3599-2.3610" (59.941-59.970 MM)
DEUTZ
4 Cylinders
1.4
83
4.1338" (104.999 MM)

2.1642-2.1650" (54.971-54.991 MM)
2.7547-2.7555" (69.969-69.99 MM)

Main:
Main:
DIESEL, 4 STROKE, OIL COOLED
Comments:
DEUTZ
Stroke:
Rods:
2.7
2.7555-2.7566" (69.99-70.018 MM)

Main:
Main:
Comments:
DIESEL, DIR INJ, 873 LOADER
3.1
F4L 1011
Cyl Bore:
3.5827" (91.001 MM)
Rod Width:
1.2205" (31.001 MM)
Thrust Width:
1.3780-1.3795
167
4.134" (105.004 MM)

2.1650-2.1660" (54.991-55.016 MM)
DEUTZ
3.1
3.583" (91.008 MM)
Rod Width:
1.220" (30.988 MM)
Thrust Width:
1.380
190
3.2
190
DEUTZ
195
3.8
2.7548-2.7555" (69.972-69.99 MM)

Main:
Main:
Comments:
DIESEL,DIR INJ,F4L912W, ALLIS MODEL 6240,6250
DEUTZ
Stroke:
Rods:
4.1
4.9213" (125.000 MM)

2.3599-2.3610" (59.941-59.970 MM)
249
1.378-1.380" (35.000-35.040 MM)
F4L2011
3.7008-3.7016" (94.000-94.020 MM)
1.378-1.380" (35.000-35.040 MM)
BF4M1012
229
4.724" (119.99 MM)

2.3599-2.3606" (59.941-59.959 MM)
BF4L2011
3.7008-3.7016" (94.000-94.020 MM)
F4L 2011
Stroke: 4.528" (115.000 MM)

Cyl Bore:
2.2827-2.2835" (57.980-58.000 MM)
Rods:
2.9126-2.9134" (73.980-74.000 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, DIR INJ, ALSO BF4M1012 E (NO COOL SYSTEM)
Stroke:
Rods:
BF4M1011
BF4L 2011
Stroke: 4.409" (112.000 MM)

Cyl Bore:
2.1642-2.1650" (54.970-54.990 MM)
Rods:
2.7547-2.7555" (69.970-69.990 MM)
Main:
Main:
Thrust Width:
Comments:
DEUTZ
F4L1011
BF4M 1011
Cyl Bore:
Stroke: 4.409" (112.000 MM)

Cyl Bore:
2.1642-2.1650" (54.970-54.990 MM)
Rods:
2.7547-2.7555" (69.970-69.990 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL,DIR INJ,4 STROKE, & BF4M 2011 (NO COOL SYS)
DEUTZ
F3L913
4.015" (101.981 MM)

.177" (4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.177" (4.496 MM)
1.457-1.460" (37.008-37.084 MM)
DEUTZ
Stroke:
Rods:
(cont.)
F3L913
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.7548-2.7555" (69.972-69.99 MM)

Main:
Main:
DIESEL, 4 STROKE, DIR INJ.
Comments:
Engine Model
BF4M1012
3.7008-3.7016" (94.000-94.020 MM)
1.4173-1.4189" (36.000-36.040 MM)
F4L912
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
BF4L913 TURBO
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
F4L912
3.937" (100. MM)

.169-.177" (4.293-4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.169-.177
1.457-1.458" (37.000-37.025 MM)
BF4L913 TURB
4.0157" (102.000 MM)

.169-.177" (4.293-4.496 MM)
1.3386-1.3401" (34.-34.039 MM)
.169-.177" (4.293-4.496 MM)
1.4567-1.4577" (37.000-37.025 MM)
ALL 2.7548-2.7555" (69.972-69.99 MM)

Main:
Main:
3128481
Casting Numbers:
Comments:
DIESEL, 4 STROKE, DIR INJ, AIR COOLED TORQUE FOR REMOVABLE COUNTERWGTS: 22#,+30,+30
133

Make
Liter
CID
Vin
Model
Year
DEUTZ
DEUTZ
Stroke:
Rods:
4 Cylinders
4.1
249
BF4L913C
4.9213" (125.000 MM)

2.5973-2.5980" (54.971-65.989 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.9516-2.9524" (74.971-74.991 MM)

Main:
Main:
2139481, 3128481
Casting Numbers:
Comments:
DEUTZ
DEUTZ
Main:
Main:
4.8
291
Main:
Main:
6.1
374
3.5419-3.5428" (89.964-89.987 MM)
6.1
374
FL413
4.9213-4.9229" (125.001-125.042 MM)
.216" (5.486 MM)
2.677" (67.996 MM)
.216
1.614
FL413
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.7388-3.7397" (94.966-94.988 MM)
1.496-1.498" (38.000-38.060 MM)
FL413
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.921*" (124.993 MM)

2.9516-2.9524" (74.971-74.991 MM)
DEUTZ
FL413
4.9213-4.9229" (125.001-125.042 MM)
.216" (5.486 MM)
2.677" (67.996 MM)
.216
1.614
5 Cylinders
4.7
286
4.724" (119.99 MM)

2.3599-2.3606" (59.941-59.959 MM)
F5L912
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.7548-2.7555" (69.972-69.99 MM)

Main:
Main:
DIESEL,4 STROKE,DIR INJ, F5L912W
Comments:
Stroke:
Rods:
6 Cylinders
0.0
4.9213 / 125 MM (NM)

2.3599-2.3605" (59.941-59.957 MM)
DEUTZ
Rods:
BFL913 TURBO
4.0159-4.0173" (102.004-102.039 MM)

.169-.177" (4.293-4.496 MM)
1.3386-1.3401" (34.-34.039 MM)
.169-.177
1.4567-1.4571
3 & 6 CYL, 4 STROKE DIESEL, DIR INJ TORQUE FOR REMOVABLE COUNTERWGTS: 22#,+30,+30 ** .016
MAX SIDE PLAY
0.0
3.2273-3.2279" (81.973-81.989 MM)
0.0
BF6L513
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.0538-4.0546" (102.967-102.987 MM)

Main:
Main:
Comments:
BF
DEUTZ
BF L913 TURBO
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
ALL 2.7548-2.7555" (69.972-69.99 MM)

Main:
Main:
2139481, 3128481
Casting Numbers:
Comments:
F5L912, F5L912
3.937" (100. MM)

.169-.177" (4.293-4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.169-.177
1.457-1.458" (37.000-37.025 MM)
DEUTZ
DEUTZ
BF4M1013
4.2520-4.2527" (108.000-108.020 MM)
DEUTZ
Stroke:
Rods:
BF4L913C
4.0159-4.0173" (102.004-102.039 MM)

.169-.177" (4.293-4.496 MM)
1.3386-1.3401" (34.000-34.039 MM)
.169-.177" (4.293-4.496 MM)
1.4173-1.4183" (35.999-36.025 MM)
BF4M1013
4.921*" (124.993 MM)

2.9516-2.9524" (74.971-74.991 MM)
DEUTZ
Stroke:
Rods:
(cont.)
DIESEL, 4 STROKE, AIR COOLED, DIR INJ TORQUE FOR REMOVABLE COUNTERWGTS 22 FT/LBS, +30r,
+30r.
Stroke: 5.118" (130.000 MM)

Cyl Bore:
2.6764-2.6772" (67.980-68.000 MM)
Rods:
3.3457-3.3464" (84.980-85.000 MM)
Main:
Main:
Thrust Width:
Comments:
Stroke:
Rods:
Engine Model
BFL6513R
Cyl Bore:
BF6L513
.185-.208" (4.699-5.283 MM)

1.5354-1.5362" (38.999-39.019 MM)
.185-.208
1.612-1.617
BFL6513R
4.9216-4.9228" (125.010-125.040 MM)
33.2272-3.2279" (81.973-81.988 MM) *

Rods:
STD 1 4.0538-4.0546" (102.966-102.988 MM)
Main 1:
STD 2 4.0439-4.0448" (102.716-102.735 MM)
1.6142-1.6220" (41.000-41.200 MM)
Main:
Main 2:
Thrust Width:
Comments:
DIESEL * ROD JOURNAL DIAMETER STD II: 3.2174-3.2180" (81.723-81.738 MM)
134

Make
Liter
CID
Vin
Model
Year
DEUTZ
DEUTZ
6 Cylinders
4.8
292
BF6M1012
Stroke: 4.528" (115.000 MM)

Cyl Bore:
2.2827-2.2835" (57.980-58.000 MM)
Rods:
2.9126-2.9134" (73.980-74.000 MM)
Main:
Main:
Thrust Width:
Comments:
DEUTZ
Stroke:
Rods:
5.6
343
DEUTZ
5.6
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
343
DEUTZ
5.6
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
343
DEUTZ
6.1
1.4173-1.4189" (36.000-36.040 MM)
374
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
BF6L912W
3.937" (100. MM)

.169-.177" (4.293-4.496 MM)
1.4173-1.4189" (35.999-36.04 MM)
.169-.177
1.457-1.460
F6L912, F6L912
3.937" (100. MM)

.169-.177" (4.293-4.496 MM)
1.339-1.340" (34.011-34.036 MM)
.169-.177
1.457-1.458" (37.000-37.025 MM)
BF6L913 TURBO
4.9213" (125.000 MM)

2.3599-2.3610" (59.941-59.970 MM)
BF6L912
3.9370-3.9380" (100.-100.025 MM)

.169-.177" (4.293-4.496 MM)
1.4173-1.4189" (35.999-36.04 MM)
.169-.177
1.457-1.460
F6L912
4.724" (119.99 MM)

2.3599-2.3606" (59.941-59.959 MM)
2.7547-2.7555" (69.969-69.990 MM)

Main:
Main:
Comments:
DIESEL,4 STROKE,DIR INJ,AIR COOLED,F6L912W
Stroke:
Rods:
BF6M1012
3.7008-3.7016" (94.000-94.020 MM)
BF6L912W
4.724" (119.99 MM)

2.5185-2.5193" (63.97-63.99 MM)
2.7547-2.7555" (69.969-69.99 MM)

Main:
Main:
3151RA015005
Casting Numbers:
Comments:
BF6L912W AIR COOLED DIESEL
Stroke:
Rods:
(cont.)
BF6L912
4.724" (119.99 MM)

2.5185-2.5193" (63.97-63.99 MM)
2.8729-2.8736" (72.972-72.989 MM)

Main:
Main:
3151RA015005
Casting Numbers:
Comments:
BF6L912 AIR COOLED DIESEL
Stroke:
Rods:
Engine Model
BF6L913 TURB
4.0157" (102.000 MM)

.169-.177" (4.293-4.496 MM)
1.3386-1.3401" (34.000-34.039 MM)
.169-.177" (4.293-4.496 MM)
1.4567-1.4577" (37.000-37.025 MM)
2.7548-2.7555" (69.972-69.990 MM)

Main:
Main:
3128481
Casting Numbers:
Comments:
DIESEL, 4 STROKE, DIR INJ, AIR COOLED TORQUE FOR REMOVABLE COUNTERWGTS=22 FT/LBS, +30r,
+30r
DEUTZ
Stroke:
Rods:
6.1
374
BF6L913/C
4.9213" (125.000 MM)

2.5973-2.5980" (65.971-65.989 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
BF6L913/C
4.0159-4.0173" (102.004-102.039 MM)

.169-.177" (4.293-4.496 MM)
1.3386-1.3401" (34.-34.039 MM)
.169-.177" (4.293-4.493 MM)
1.4173-1.4183 (35.999-36.025 MM)
ALL 2.9516-2.9524" (74.971-74.991 MM)

Main:
Main:
2139481, 3128481
Casting Numbers:
Comments:
DIESEL, 4 STROKE, AIR COOLED, DIR INJ TORQUE FOR REMOVABLE COUNTERWGTS: 22#,+ 30,+ 30 **
MAX. OF .016"
DEUTZ
7.1
436
BF6M1013
Stroke: 5.118" (130.000 MM)

Cyl Bore:
2.6764-2.6772" (67.980-68.000 MM)
Rods:
3.3457-3.3464" (84.980-85.000 MM)
Main:
Main:
Thrust Width:
Comments:
DEUTZ
8.5
517
BF6M1013
4.2520-4.2527" (108.000-108.020 MM)
1.4961-1.4984" (38.000-38.060 MM)
BF6L413F
4.7244" (120. MM)

Stroke: 4.9212" (124.998 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.5419-3.5428" (89.964-89.987 MM)
.213-.220
Main:
Main Fillet:
1.612-1.616" 40.950-41.050 MM)
Main:
Thrust Width:
Comments:
DIESEL, F6L413, F6L413W, 4 STROKE COUNTERWGT TORQUE: 21MM
W/WASHER=22#,+30+60+60,25MM W/OUT WASHER=37#,+30+60+60
135
BF6L413F

Make
Liter
CID
Vin
Model
Year
DEUTZ
DEUTZ
Engine Model
6 Cylinders
9.6
584
(cont.)
BF6L413F
BF6L413F
4.9212" (124.998 MM)

Stroke: 5.1181" (130. MM)
Cyl Bore:
2.9516-2.9523" (74.971-74.988 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.7388-3.7397" (94.966-94.988 MM)
.213-.220
Main:
Main Fillet:
Main:
DIESEL, F6L413, F6L413F & W, BF6L413F & W,4 STROKE COUNTERWGT TORQUE: 21MM
Comments:
W/WASHER=22#,+30+60+60 25MM DIAM W/OUT WASHER=37#+30+60+60
DEUTZ
Stroke:
Rods:
12.0
731
8550
5.625" (142.875 MM)

3.3715-3.3730" (85.636-85.674 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.9945-3.9960" (101.46-101.498 MM)

Main:
Main:
4395458
Casting Numbers:
Comments:
DEUTZ-ALLIS MODEL 8550/DIESEL
85-94
DEUTZ
DEUTZ
8550
5.2510-5.2525" (133.375-133.414 MM)

.250" (6.35 MM)
2.1235-2.1265" (53.937-54.013 MM)
.250
3.250-3.252
8 Cylinders
11.3
690
BF8L413
BF8L413
4.7244" (120. MM)

Stroke: 4.9212" (124.998 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.5419-3.5428" (89.964-89.987 MM)
.213-.220
Main:
Main Fillet:
Main:
DIESEL, F8L413, FL413W, 4 STROKE COUNTERWGT TORQUE: 21MM W/WASHER=22#,+30+60+60 25MM
Comments:
W/OUT WASHER=37#,+30+60+60
DEUTZ
12.8
779
BF8L413
BF8L413
4.9212" (124.998 MM)

Stroke: 5.1181" (130. MM)
Cyl Bore:
2.9516-2.9523" (74.971-74.988 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.7388-3.7397" (94.966-94.988 MM)
.213-.220
Main:
Main Fillet:
Main:
Comments:
DIESEL, F8L413, F8L413F & W, BF8L413F & W,4 STROKE COUNTERWGT TORQUE: 22MM W/WASHER
22#+30+60+60, 25MM W/OUT WASHER 37#,+30+60+60
DEUTZ
Stroke:
Rods:
13.4
817
BF8L513
5.118" (130.000 MM)

2.9517-2.9528" (74.973-75.001 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.7382-3.7397" (94.95-94.988 MM) *

Main:
Main:
A-1612Z1
Casting Numbers:
DEUTZ
DEUTZ
BF8L513
5.0394" (128.000 MM)

.1339-.1496" (3.401-3.8 MM)
1.3248-1.3327" (33.650-33.850 MM)
.1496-.1654 **
1.6142-1.6166 *
10 Cylinders
14.1
862
BF10L413
BF10L413
4.7244" (120. MM)

Stroke: 4.9212" (124.998 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.5419-3.5428" (89.964-89.987 MM)
.213-.220
Main:
Main Fillet:
Main:
DIESEL, F10L413, F10L413W, 4 STROKE COUNTERWGT TORQUE: 21MM W/WASHER=22#,+30+60+60
Comments:
25MM W/OUT WASHER=37#,+30+60+60
DEUTZ
14.7
897
F10L413L
F10L413L
4.7244" (120. MM)

Stroke: 5.1181" (130. MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.5419-3.5428" (89.964-89.987 MM)
.213-.220
Main:
Main Fillet:
Main:
Comments:
DIESEL, 4 STROKE COUNTRWGT TORQUE: 21MM W/WASHER=22#, +30+60+60,25MM W/OUT
WASHER=37#, +30+60+60+
DEUTZ
16.0
973
BF10L413
BF10L413
4.9212" (124.998 MM)

Stroke: 5.1181" (130. MM)
Cyl Bore:
2.9516-2.9523" (74.971-74.988 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.7388-3.7397" (94.966-94.988 MM)
.213-.220
Main:
Main Fillet:
Main:
Comments:
DIESEL,F10L413,F10L413F & W,BF10L413F & W,4 STROKE COUNTERWGT TORQUE: 21MM
W/WASHER=22#,+30+60+60,25MM W/OUT WASHER=37#,+30+60+60
DEUTZ
Stroke:
Rods:
Main:
Main:
16.7
5.118" (129.997 MM)

2.9517-2.9528" (74.973-75.001 MM)
3.7382-3.7397" (94.95-94.988 MM) *
1,021
BF10L513
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
136
BF10L513
5.0394" (128.000 MM)

.1339-.1496" (3.401-3.8 MM)
1.3248-1.3327" (33.650-33.850 MM)
.1496-.1654 **
1.6142-1.6166 *

Make
Liter
CID
Vin
Model
Year
DEUTZ
DEUTZ
Engine Model
12 Cylinders
17.0
1035
BF12L413
BF12L413
4.7244" (120. MM)

Stroke: 4.9212" (124.998 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.5419-3.5428" (89.964-89.987 MM)
.213-.220
Main:
Main Fillet:
Main:
DIESEL, F12L413, 4 STROKE COUNTERWGT TORQUE: 21MM W/WASHER=22#, +30+60+6025MM W/OUT
Comments:
WASHER=37 FT/LBS, +30+60+60
DEUTZ
19.1
1,168
BF12L413
BF12L413
4.9212" (124.998 MM)

Stroke: 5.1181" (130. MM)
Cyl Bore:
2.9516-2.9523" (74.971-74.988 MM)
.213-.220" (5.41-5.588 MM)
Rods:
Rod Fillet:
3.7388-3.7397" (94.966-94.988 MM)
.213-.220
Main:
Main Fillet:
Main:
Comments:
DIESEL,F12L413,F12L413F & W,BF12L413F & W,4 STROKE COUNTERWGT TORQUE: 21MM
W/WASHER=22#,+30+60+60 25MM W/OUT WASHER=37#,+30+60+60
DEUTZ
Stroke:
Rods:
20.1
1,225
BF12L513
5.118" (129.997 MM)

2.9517-2.9528" (74.973-75.001 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.7382-3.7397" (94.95-94.988 MM) *
Main:
Main:
FERGUSON
FERGUSON
Stroke:
Rods:
4 Cylinders
1.9
113
TEA20
3.622" (91.999 MM)

2.0861-2.0866" (52.987-53. MM)
2.4790-2.4795" (62.967-62.979 MM)

Main:
Main:
USED UP-SERIAL # 172598
Comments:
FERGUSON
Stroke:
Rods:
2.1
127
Cyl Bore:
3.1492-3.1503" (79.99-80.018 MM)
Rod Width:
1.1870-1.1890" (30.15-30.201 MM)
Thrust Width:
1.7498-1.7507
TEA20
3.6220" (91.999 MM)

2.0861-2.0866" (52.987-53. MM)
2.4790-2.4795" (62.967-62.979 MM)

Main:
Main:
Comments:
TEA 20
TEA20
Stroke:
Rods:
Main:
Main:
3.3460-3.3468" (84.988-85.009 MM)
Rod Width:
1.1865-1.1915" (30.137-30.264 MM)
Thrust Width:
1.7498-1.7507
8 Cylinders
3.0
183
308
2.864" (72.740 MM)

1.7173-1.7180" (43.619-43.637 MM)
2.4790-2.4795" (62.966-62.979 MM)
3.1890-3.1898" (81.000-81.020 MM)
Thrust Width:
1.4173-1.4189" (36.000-36.039 MM) @ REA
3 Cylinders
2.6
158
8035
Stroke: 4.330" (109.982 MM)

2.3122-2.3127" (58.730-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.200 MM)
Main:
Main:
DIESEL, 1265 OLIVER ALSO
Comments:
3.9375" (100.013 MM)
Thrust Width:
1.2597-1.2638"
4 Cylinders
0.0
780
2.3122-2.3127" (58.730-58.743 MM)

Rods:
2.9995-2.9999" (76.187-76.200 MM)
Main:
Main:
780 + 880 DIESEL TRACTOR
Comments:
FIAT
8035
Cyl Bore:
FIAT
FIAT
77-84
Cyl Bore:
FIAT
FIAT
TEA20
Cyl Bore:
FERRARI
FERRARI
BF12L513
5.0394" (128.000 MM)

.1339-.1496" (3.401-3.8 MM)
1.3248-1.3327" (33.650-33.850 MM)
.1496-.1654 **
1.6142-1.6166 *
0.5
Stroke: 2.760" (70.104 MM)

1.7331-1.7336" (44.021-44.033 MM)
Rods:
#1 2.1251-2.1256" (53.978-53.99 MM)
Main:
Main:
98698B, 98698B
Casting Numbers:
30
79-83
780 + 880
Cyl Bore:
4.0551-4.0558" (103.000-103.018 MM)
Main Fillet:
Thrust Width:
.091-.098" (2.300-2.500 MM)

1.2598-1.2638" (32.000-32.100 MM)
Cyl Bore:
2.640" (67.056 MM)
57-60
137

Make
Liter
CID
Vin
Model
Year
FIAT
FIAT
4 Cylinders
1.1
66
80-87
Stroke: 2.185" (55.499 MM)

1.7913-1.7920" (45.499-45.517 MM)
Rods:
1.9994-2.0002" (50.785-50.805 MM)
Main:
Main:
YUGO ALSO
Comments:
FIAT
1.1
Cyl Bore:
1.2
68
28A
75
1.3
79
1.4
88
1.5
91
1.5
2.835" (72.009 MM)
Cyl Bore:
3.386" (86.004 MM)
Cyl Bore:
3.1496" (80.000 MM)
Cyl Bore:
3.406" (86.512 MM)
54-70
73-78
73
38A
Stroke: 2.520" (64.008 MM)

1.7916-1.7924" (45.507-45.527 MM)
Rods:
1.1990-1.1998" (30.455-30.475 MM)
Main:
Main:
Comments:
2BC
FIAT
Cyl Bore:
24B
Stroke: 2.8346" (72.000 MM)

1.7916-1.7924" (45.507-45.527 MM)
Rods:
1.9994-2.0002" (50.785-50.805 MM)
Main:
Main:
Comments:
2BC
FIAT
3.1496" (80. MM)
28A
Stroke: 2.205" (56.007 MM)

1.7916-1.7924" (45.507-45.527 MM)
Rods:
1.9994-2.0002" (50.785-50.805 MM)
Main:
Main:
Comments:
2BC
FIAT
73
Cyl Bore:
Stroke: 2.953" (75.006 MM)

1.5745-1.5750" (39.992-40.005 MM)
Rods:
#1 1.6532-1.6538" (41.991-42.007 MM)
Main:
Main:
669700, 869700
Casting Numbers:
FIAT
@ #5
Thrust Width:
Stroke: 2.795" (70.993 MM)

1.7916-1.7924" (45.507-45.527 MM)
Rods:
1.9994-2.0002" (50.785-50.805 MM)
Main:
Main:
Comments:
2BC
FIAT
3.150" (80.01 MM)
91
38B
96
32A
79-80
81-83
1.7916-1.7924" (45.507-45.527 MM)

Rods:
1.1990-1.1998" (30.455-30.475 MM)
Main:
Main:
Comments:
FUEL INJECTION
FIAT
1.6
Stroke: 3.110" (78.994 MM)

1.9993-2.0000" (50.782-50.8 MM)
Rods:
2.0860-2.0868" (52.984-53.005 MM)
Main:
Main:
Comments:
2BC
FIAT
1.6
98
1.8
107
2.0
122
Cyl Bore:
3.1496" (80. MM)
73
32A
Stroke: 3.110" (78.994 MM)

1.9993-2.0000" (50.782-50.8 MM)
Rods:
2.0860-2.0868" (52.984-53.005 MM)
Main:
Main:
Comments:
2BC, DOHC, SPIDER
FIAT
3.1496" (80. MM)
25B
Stroke: 3.150" (80.01 MM)

1.8983-1.8991" (48.217-48.237 MM)
Rods:
1.9994-2.0002" (50.785-50.805 MM)
Main:
Main:
Comments:
2BC
FIAT
73-74
Cyl Bore:
SPIDER
75-78
Cyl Bore:
3.307" (83.998 MM)
Cyl Bore:
3.3071" (84. MM)
Cyl Bore:
3.307" (83.998 MM)
32B
78-80
1.9993-2.0000" (50.782-50.8 MM)

Rods:
2.0860-2.0868" (52.984-53.005 MM)
Main:
Main:
Comments:
DOHC, 2BC
FIAT
2.0
Stroke: 3.543" (89.992 MM)

1.9993-2.0000" (50.782-50.8 MM)
Rods:
2.0860-2.0868" (52.984-53.005 MM)
Main:
Main:
Comments:
DOHC, FUEL INJECTION
122
32C
81-83
138
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
Year
FIAT
FIAT
4 Cylinders
3.7
224
3.7
4.6
8041M
4.0550" (103.000 MM)
Cyl Bore:
224
8045
Stroke: 4.330" (109.982 MM)

2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-2.9999" (76.187-76.197 MM)
Main:
Main:
Comments:
4.055 BORE, 4.330 STROKE
FIAT
8045
4.055" (102.997 MM)
Cyl Bore:
278
B10
Stroke: 4.724" (120.000 MM)

2.7504-2.7511" (69.860-69.878 MM)
Rods:
3.0000-3.0007" (76.202-76.220 MM)
Main:
Main:
Comments:
DIESEL
B10
4.3307-4.3315" (110.000-110.022 MM)
Cyl Bore:
FIAT
FIAT
5 Cylinders
0.0
880
2.7504-2.7511" (69.860-69.878 MM)

Rods:
3.0000-3.0008" (76.202-76.220 MM)
Main:
Main:
880 DIESEL TRACTOR
Comments:
79-83
880-5
.138-.150" (3.500-3.800 MM)
Main Fillet:
FIAT
FIAT
(cont.)
8041M
Stroke: 4.3310" (110.000 MM)

2.3122-2.3127" (58.730-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.200 MM)
Main:
Main:
DIESEL
Comments:
FIAT
Engine Model
6 Cylinders
5.5
336
8065.24
8065.24
4.055" (102.997 MM)

Stroke: 4.330" (109.982 MM)
Cyl Bore:
2.3120-2.3128" (58.725-58.745 MM)
.074-.078" (1.88-1.981 MM)
Rods:
Rod Fillet:
2.9994-3.0002" (76.185-76.205 MM)
.090-.098
Main:
Main Fillet:
Main:
IVECO 8065.24, TURBO, 4.055 BORE, 4.330 STROKE .004,.010,.020,.030,.040 O.S. BRGS AVLBL
Comments:
THRUST RING THKNS .133-.135
FIAT
5.8
355
8060
Stroke: 4.330" (109.982 MM)

2.3120-2.3127" (58.725-58.743 MM)
Rods:
2.9994-3.0000" (76.185-76.2 MM)
Main:
Main:
Comments:
8060-04 IVECO TRUCK
FIAT
5.9
358
88-90
8060
4.055" (102.997 MM)
Cyl Bore:
8065.25
8065.25
4.094" (103.988 MM)

Stroke: 4.527" (114.986 MM)
Cyl Bore:
2.5088-2.5096 *" (63.724-63.744 MM)
.118-.138" (2.997-3.505 MM)
Rods:
Rod Fillet:
3.1414-3.1421 *" (79.792-79.809 MM)
.118-.138
Main:
Main Fillet:
Main:
Comments:
IVECO 8065.25, TURBO, 4.095 BORE, 4.527 STROKE * .005,.010,.020,.030,.040 OVERSIZE BRGS AVLBL
FIAT
6.0
366
8065
8065.04
4.0551-4.0558" (103.-103.017 MM)

Stroke: 4.331" (110.007 MM)
Cyl Bore:
2.3120-2.3128 *" (58.725-58.745 MM)
.074-.078" (1.88-1.981 MM)
Rods:
Rod Fillet:
#1 2.9994-3.0002 *" (76.185-76.205 MM)
.090-.098
Main:
Main Fillet:
Main:
Comments:
IVECO 8065.04, 4.055 BORE, 4.331 STROKE, NON-TURBO * .004,.010,.020,.030,.040 O.S. BRGS AVLBL
FIAT
6.0
366
D(1)
8065
8065.05
4.094" (103.988 MM)

Stroke: 4.527" (114.986 MM)
Cyl Bore:
2.5088-2.5096 *" (63.724-63.744 MM)
.118-.138" (2.997-3.505 MM)
Rods:
Rod Fillet:
#1 3.1414-3.1421 *" (79.792-79.809 MM)
.118-.138
Main:
Main Fillet:
Main:
Comments:
IVECO 8065.05, 4.094 BORE, NON TURBO * .005,.010,.020,.030,.040 O.S. BRGS AVLBL
THRUST RING
THKNS .133-.135
FIAT
8.1
494
8365
Stroke: 5.110"
Cyl Bore:
2.8536-2.8543" (72.481-72.499 MM)
Rods:
Rod Fillet:
3.1410-3.1417" (79.781-79.799 MM)
Main:
Main Fillet:
Main:
Thrust Width:
64806670F, 64806671F
Casting Numbers:
Comments:
FL10C FIAT ALLIS THRUST WASHER THICKNESS = .133-135"
139
FL10C
4.5275-4.5284" (114.999-115.021 MM)
.138-.150" (3.505-3.81 MM)
.138-.150
1.658-1.673 @#4

Make
Liter
CID
Vin
Model
Year
FORD
FORD
2 Cylinders
0.7
43
Stroke: 3.150" (80.01 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
0.7
0.8
0.8
.095-.098 @ #3
1.1
1.3
LEK757C
LEK757C
Cyl Bore:
2.953-2.954" (75.006-75.032 MM)
Thrust Width:
.095-.098 @ #3
LEK802D
LEK802D
Cyl Bore:
3.150" (80.01 MM)
Thrust Width:
.095-.098 @ #3
49
LEK802D/1200
LEK802D/1200
Cyl Bore:
2.954" (75.032 MM)
Thrust Width:
.095-.098 @ #3
69
Stroke: 3.940" (100.076 MM)

2.3603-2.3610" (59.952-59.969 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
1500 TRACTOR, DIESEL/SHIBURA
FORD
Thrust Width:
49
Stroke: 3.150" (80.01 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
LEK752C2
2.950" (74.93 MM)
43
Stroke: 3.150" (80.01 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
LEK752C2
Cyl Bore:
Stroke: 3.150" (80.01 MM)

1.8882-1.8888" (47.96-47.976 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
Engine Model
LET862C
LET862C
Cyl Bore:
3.350" (85.09 MM)
Thrust Width:
.095-.098 @ #3
77
LE892
LE892
3.540" (89.916 MM)

Stroke: 3.940" (100.076 MM)
Cyl Bore:
2.3603-2.3610" (59.952-59.969 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
.095-.098 @ #3
Main:
Thrust Width:
M750
Casting Numbers:
Comments:
1700 TRACTOR, DIESEL/SHIBURA THE SERVICE MANUAL FOR A 1700 TRACTOR INDICATES ROD & MAIN
BEARINGS AVAILABLE IN .010 & .020" O/S
FORD
FORD
3 Cylinders
0.9
53
Stroke: 2.830" (71.882 MM)

1.5340-1.5344" (38.964-38.974 MM)
Rods:
1.8096-1.8100" (45.964-45.974 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
S723
S723
Cyl Bore:
2.830" (71.882 MM)
Thrust Width:
.095-.098 @ #3
1120, 1210 TRACTOR, DIESEL/SHIBURA THRUST WASHER THKNS .077-.079
0.9
58
CM224
Stroke: 2.830" (71.882 MM)

Cyl Bore:
1.5340-1.5344" (38.964-38.974 MM)
Rods:
1,2,3 1.8096-1.8100" (45.964-45.974 MM)
Main 1:
4 1.7920-1.7926" (45.950-45.970 MM)
Main:
Main 2:
Thrust Width:
M750, N741
Casting Numbers:
Comments:
DIESEL, CM224 MOWER, 1220, 1310 TRACTOR, SHIBURA
140
S753
2.9527-2.9534" (74.999-75.016 MM)
.095-.098 @ #3

Make
Liter
CID
Vin
Model
Year
FORD
FORD
3 Cylinders
1.1
68
Stroke: 3.150" (80.01 MM)

1.8884-1.8888" (47.965-47.976 MM)
Rods:
2.6755-2.6760" (67.958-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
Engine Model
(cont.)
K773
K773
Cyl Bore:
3.031" (76.987 MM)
Thrust Width:
.095-.098 @ #3
1.3
77
CM274
J823
3.2280-3.2290" (81.991-82.017 MM)

Stroke: 3.150" (80.000 MM)
Cyl Bore:
1.7300-1.7310" (43.960-43.980 MM)
Rods:
2.2810-2.2820" (57.950-57.970 MM)
Main:
Main:
Comments:
DIESEL, CM274 MOWER, J823 SHIBURA ENGINE THRUST WASHER THICKNESS .115-.117" (2.950-3.000
MM) STD.
FORD
1.3
81
Stroke: 3.150" (80.01 MM)

1.7300-1.7310" (43.942-43.967 MM)
Rods:
2.2810-2.2820" (57.937-57.963 MM)
Main:
Main:
Comments:
1320, 1520 TRACTOR, DIESEL, SHIBAURA
FORD
1.4
85
Stroke: 3.310" (84.074 MM)

1.8884-1.8888" (47.965-47.976 MM)
Rods:
2.6755-2.6760" (67.958-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
1710 TRACTOR, DIESEL/SHIBAURA
FORD
1.4
85
Stroke: 3.310" (84.074 MM)

1.8884-1.8888" (47.965-47.976 MM)
Rods:
#1 2.6755-2.6760" (67.958-67.97 MM)
Main:
Main:
Comments:
1710 TRACTOR, DIESEL/SHIBURA * WASHER
FORD
1.4
1.5
FORD
1.7
2.4
FORD
2.5
Thrust Width:
.095-.098 @ #3
TRACTOR 1710
3.3070-3.3080" (83.998-84.023 MM)
Thrust Width:
@ #1 & #2 *
LEM853
N843
3.307" (83.998 MM)
1910
T853-A
Cyl Bore:
3.346-3.347" (84.988-85.014 MM)
Thrust Width:
.095-.098 @ #3
144
152
LEM853
3.3465-3.3478" (85.001-85.034 MM)
N843
104
Stroke: 5.000" (127.00 MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
5.246" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
DIESEL, PERKINS, ALSO 2000 SUPER DEXTA
80-92
Cyl Bore:
Cyl Bore:
Stroke: 5.000" (127.000 MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
DIESEL, PERKINS ENGINE
H843
3.307-3.308" (83.998-84.023 MM)
91
Stroke: 3.940" (100.076 MM)

2.3602-2.3610" (59.949-59.969 MM)
Rods:
2.6750-2.6760" (67.945-67.97 MM)
Main:
Main:
Comments:
1910 IND & TRACTOR, DIESEL/SHIBURA MANF.
FORD
H843
Cyl Bore:
Stroke: 3.543" (89.992 MM)

2.0458-2.0463" (51.963-51.976 MM)
Rods:
2.6755-2.6760" (67.958-67.97 MM)
Main:
Main:
Comments:
1720 TRACTOR, DIESEL, SHIBAURA
J843
3.307-3.308" (83.998-84.023 MM)
Cyl Bore:
87
Stroke: 3.310" (84.074 MM)

2.0453-2.0460" (51.951-51.968 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
M750
Casting Numbers:
Comments:
FORD
J843
Cyl Bore:
DEXTA
DEXTA
Cyl Bore:
3.5010-3.5020" (88.925-88.951 MM)
Thrust Width:
1.8427-1.8457" @ #4 LIP TYPE SEAL, 1.883
SUPER DEXTA
SUPER DEXTA
Cyl Bore:
3.6000-3.6010" (91.440-91.465 MM)
Thrust Width:
1.8427-1.8457" @#4 LIP TYPE SEAL,1.883-1
141

Make
Liter
CID
Vin
Model
Year
FORD
FORD
3 Cylinders
2.6
158
Stroke: 3.801" (96.545 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3713-3.3723" (85.631-85.656 MM)
Main:
Main:
Balance: Internal
DIESEL, 2000, 2600 SERIES TRACTORS
Comments:
FORD
2.6
158
2.9
2000 SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.801" (96.545 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3713-3.3723" (85.631-85.656 MM)
Main:
Main:
Balance: Internal
Comments:
GAS, 2000, 3000, 2600 TRACTORS
FORD
Engine Model
175
2000 & 2600
4.2000-4.20024" (106.68-106.74 MM)

.120-.140" (3.048-3.556 MM)
.120-.140
.130 @ #2
2000 SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
61-75
(cont.)
68-75
2000,3000,2600
4.2000-4.2024" (106.68 MM)

.120-.140" (3.048-3.556 MM)
.120-.140
.130 @ #2
2000
65-68
2000,3000,3600
4.2000" (106.68 MM)

Stroke: 4.200" (106.68 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM)
.120-.140" (3.048-3.556 MM)
Rods:
Rod Fillet:
3.3713-3.3723" (85.631-85.656 MM)
.120-.140
Main:
Main Fillet:
1.462 @ #2
Main:
Thrust Width:
Balance: Internal
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
C5NE-6303-L, C5NE-6303-R, C5NE-6305, EN438
Casting Numbers:
Comments:
GAS 2000, 3000, 3600 TRACTOR 1965-5/68 4.200 STK THRUST BRG LENGTH .130
FORD
2.9
175
3000
Stroke: 4.200" (106.68 MM)

Cyl Bore:
2.7496-2.7500" (69.84-69.85 MM)
Rods:
Rod Fillet:
C 3.3713-3.3723" (85.631-85.656 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
C5NE-6303-L, C5NE-6303-R, C5NE-6305, EN438
Casting Numbers:
Comments:
3000, 3500, 3600 DIESEL TRACTOR THRUST BRG LENGTH .130
FORD
2.9
175
61-75
3000,3500,3600
4.200" (106.68 MM)

.120-.140" (3.048-3.556 MM)
.120-.140" (3.048-3.556 MM)
1.462 @ #2
TRACTOR
BSD-329
4.2007-4.2032" (106.698-106.761 MM)

Stroke: 4.200" (106.68 MM)
Cyl Bore:
2.7496-2.7504 *" (69.84-69.86 MM)
Rods:
3.3713-3.3723 *" (85.631-85.656 MM)
Main:
4.808-4.814" (122.123-122.276 MM)
Main:
Rear Seal Diameter:
Comments:
336 DIESEL TRACTOR * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
3.0
183
Stroke: 4.402" (111.811 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3713-3.3723" (85.631-85.656 MM)
Main:
Main:
Comments:
DIESEL, 4100 TRACTOR
FORD
3.1
192
Stroke: 4.200" (106.68 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3714-3.3722" (85.634-85.654 MM)
Main:
Main:
Comments:
FORD
3.1
192
3.3
201
80-89
535
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
142
3910
4.4007-4.4030" (111.778-111.836 MM)

.120-.140" (3.048-3.556 MM)
.120-.140
.130 @ #2
4000 SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.400" (111.76 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3714-3.3722" (85.634-85.654 MM)
Main:
Main:
C5NE6303N, C5NE-6303-N
Casting Numbers:
Comments:
535, 4000, 4600, 4600SU GAS TRACTORS
4100
4.201" (106.705 MM)
.120-.140" (3.048-3.556 MM)
.120-.140
@ #2
3910
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.200" (106.68 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3713-3.3723" (85.631-85.656 MM)
Main:
Main:
Comments:
GAS 4000 SERIES
FORD
4100
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
80-89
4000
4.4007-4.4030" (111.778-111.836 MM)

.120-.140" (3.048-3.556 MM)
.120-.140
.130 @ #2
65-72
BSG-333
4.4007-4.4030" (111.778-111.836 MM)

.120-.140" (3.048-3.556 MM)
.120-.140
.130 @ #2

Make
Liter
CID
Vin
Model
Year
FORD
FORD
3 Cylinders
3.3
201
Stroke: 4.400" (111.76 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3714-3.3722" (85.634-85.654 MM)
Main:
Main:
C5NE-6303-N
Casting Numbers:
Comments:
FORD
555
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
75-90
3.3
201
BSD-333
1.1
67
KSG 1.1
Cyl Bore:
1.1
67
1.1
67
1.3
79
1.3
79
1.3
81
FORD
1.3
81
VSG-411
89-92
VSG-411
84-89
VSG-413
2.9110-2.9126" (73.939-73.98 MM)
VSG-413 (2)
Stroke: 3.291" (83.591 MM)

1.5724-1.5731" (39.939-39.957 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
B301
Casting Numbers:
Comments:
SOHC, 2BBL, MAZDA, FESTIVA
84-88
2.7039-2.7051" (68.679-68.71 MM)
VSG-413
Stroke: 2.9716" (75.479 MM)

Cyl Bore:
1.6138-1.6146" (40.991-41.011 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
89BM6303CA
Casting Numbers:
Comments:
GAS, SG-413 IND, ALSO USED IN TORO LAWNMOWERS
FORD
KSG 1.1
2.9110-2.9126" (73.939-73.98 MM)
VSG-411 (2)
Stroke: 2.9716" (75.479 MM)

Cyl Bore:
1.6138-1.6146" (40.991-41.011 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
Comments:
GAS, VSG-413 IND, ALSO USED IN TORO LAWNMOWERS
FORD
93-98
3.188" (80.975 MM)
VSG-411
Stroke: 2.9716" (75.479 MM)

Cyl Bore:
1.6925-1.6933" (42.990-43.010 MM)
Rods:
2.2433-2.2441" (56.980-57.000 MM)
Main:
Main:
Comments:
FORD
BSD-333
OHV & INDUSTRIAL VGS411
Stroke: 2.5583" (64.981 MM)

Cyl Bore:
1.6925-1.6933" (42.99-43.01 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
S356E
Casting Numbers:
Comments:
FORD
65-72
4.4007-4.4032" (111.778-111.841 MM)

.120-.140" (3.048-3.556 MM)
.120-.140" (3.048-3.556 MM)
1.460 @ #2
4 Cylinders
Stroke: 2.100" (53.34 MM)

1.9370-1.9375" (49.2-49.213 MM)
Rods:
2.1253-2.1261" (53.983-54.003 MM)
Main:
Main:
711MAC, 711MAD, 711MAE, 771MAC
Casting Numbers:
FORD
BSD-333
4.4007-4.4030" (111.778-111.836 MM)

.120-.140" (3.048-3.556 MM)
.120-.140
1.460 @ #2
FORD
Comments:
(cont.)
DIESEL, 555 BACKHOE, 4600, 4600SU
Stroke: 4.400" (111.76 MM)

Cyl Bore:
2.7496-2.7504 *" (69.84-69.86 MM)
Rods:
Rod Fillet:
3.3713-3.3723 *" (85.631-85.656 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
C5NE-6303-N, E5NN-6306-N
Casting Numbers:
Comments:
DIESEL TRACTOR * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
Engine Model
89-92
VSG-413
2.9110-2.9122" (73.939-73.97 MM)
FESTIVA
88-89
Cyl Bore:
2.7953" (71.001 MM)
Main Fillet:
Thrust Width:
.118-.120
1.199-1.210 @#3
FESTIVA,ASPIRE
89-97
SOHC
SOHC
2.7953-2.7961" (71.001-71.021 MM)

Stroke: 3.291" (83.591 MM)
Cyl Bore:
1.5724-1.5731" (39.939-39.957 MM)
.0937" (2.38 MM)
Rods:
Rod Fillet:
1.9661-1.9668" (49.939-49.957 MM)
.0937" (2.380 MM)
Main:
Main Fillet:
1.199-1.210 @#4
Main:
Thrust Width:
1.181" (29.997 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
A301, B301, MB3C7
Casting Numbers:
Comments:
SOHC, MFI, MAZDA, FESTIVA, ASPIRE/(99H) FORD MVMA SPECS SAY THRUST IS @ #2
143

Make
Liter
CID
Vin
Model
Year
FORD
FORD
4 Cylinders
1.5
91
Stroke: 2.867" (72.822 MM)

1.9368-1.9376" (49.195-49.215 MM)
Rods:
2.1253-2.1257" (53.983-53.993 MM)
Main:
Main:
CORTINA 1500/1500 GT PUSH ROD
Comments:
FORD
1.6
98
1.6
98
Stroke: 3.291" (83.591 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
Balance: Internal
1.190" (30.226 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
B616, B630, B657
Casting Numbers:
Comments:
DOHC, TURBO, MFI, CAPRI, TRACER
FORD
1.6
Main Fillet:
.080-.094
CAPRI
FORD
1.6
98
FORD
1.6
98
1.6
98
@ #2 *
CAPRI,TRACER
1.6
98
FORD
1.6
98
83-85
3.14960" (80.000 MM)
Thrust Width:
1.135 @ #3
ESCORT
CVH
83-85
CVH
3.1496" (80.000 MM)
1.135 @ #3
83-85
3.1496" (80.000 MM)
1.135 @ #3
ESCORT,TRACER
144
83-85
CVH
1.135 @ #3
ESCORT
Cyl Bore:
CVH
3.1496" (80.000 MM)
ESCORT
81-82
1.135 @ #3
ESCORT
DOHC
3.14960" (80.000 MM)
Cyl Bore:
Stroke: 3.125" (79.375 MM)

Cyl Bore:
1.8854-1.8862" (47.889-47.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Thrust Width:
E1EE, E3EE, E4EEAA, E4EEAA, E4EE-AA, E6EE-AA, E6EE-AA
Casting Numbers:
Comments:
ESCORT METHANOL
Stroke: 3.2910 (83.591 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
Comments:
2BC MAZDA BUILT
91-94
3.0709-3.0716" (78.001-78.019 MM)

.062" (1.575 MM)
.093
.951 @ #4
ESCORT
Stroke: 3.125" (79.375 MM)

Cyl Bore:
1.8854-1.8862" (47.889-47.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Thrust Width:
E1EE, E3EE, E3EE-AA, E4EEAA, E4EE-AA, E6EE-AA
Casting Numbers:
Comments:
ESCORT, EFI
FORD
DOHC
Thrust Width:
Stroke: 3.125" (79.375 MM)

Cyl Bore:
1.8854-1.8862" (47.889-47.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Thrust Width:
E1EE, E1EE-AB, E3EE, E3EE-AA, E4EEAA, E4EE-AA, E6EE-AA
Casting Numbers:
Comments:
ESCORT, 2 BBL CARB, HO
FORD
KENT
3.0709-3.0716" (78.001-78.019 MM)
Stroke: 3.125" (79.375 MM)

Cyl Bore:
1.8854-1.8862" (47.889-47.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Thrust Width:
E1EE, E1EE-AB, E3EE, E4EEAA, E4EE-AA, E6EE-AA
Casting Numbers:
Comments:
ESCORT, 2BBL CARB
Stroke: 3.125" (79.375 MM)

1.8854-1.8862" (47.889-47.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
E1EE, E3EE, E4EEAA, E4EE-AA, E6EE-AA
Casting Numbers:
Comments:
ESCORT, 2BBL CARB
91-94
(cont.)
Cyl Bore:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
98
62-63
3.1878" (80.97 MM)
Stroke: 3.291" (83.591 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
B616, B657
Casting Numbers:
Comments:
DOHC, MFI, CAPRI * WASHERS
FORD
CORTINA 1500/1
Cyl Bore:
Engine Model
88-88
3.0709-3.0717" (78.001-78.021 MM)
CVH

Make
Liter
CID
Vin
Model
Year
FORD
4 Cylinders
1.6
FORD
98
ESCORT,TURBO
Stroke: 3.125" (79.375 MM)

Cyl Bore:
1.8854-1.8862" (47.889-47.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Thrust Width:
E1EE, E3EE, E3EE-AA, E4EEAA, E4EE-AA, E6EE-AA
Casting Numbers:
Comments:
FORD
(cont.)
83-85
CVH
3.156" (80.162 MM)
1.135 @ #3
EFI, TURBO, ESCORT
1.6
98
INDUSTRIAL
Stroke: 3.056" (77.622 MM)

1.9370-1.9375" (49.2-49.213 MM)
Rods:
2.1253-2.1261" (53.983-54.003 MM)
Main:
Main:
Casting Numbers:
Comments:
OHV & INDUSTRIAL, KENT ENGINE
FORD
Engine Model
1.6
98
GAS
78-93
VGS416
3.188" (80.975 MM)
Cyl Bore:
INDUSTRIAL
-80
3.1869-3.1893" (80.948-81.008 MM)

Stroke: 3.056" (77.620 MM)
Cyl Bore:
1.9332-1.9336" (49.200-49.210 MM)
Rods:
2.1253-2.1261" (53.983-54.002 MM)
Main:
Main:
Comments:
MADE IN GERMANY, GAS FORKLIFT BEARING WALL THICKNESS STD .0719-.0722" (1.788-1.796 MM)
FORD
1.6
98
KSG 1.6
Stroke: 3.056" (77.622 MM)

1.9370-1.9375" (49.2-49.213 MM)
Rods:
2.1253-2.1261" (53.983-54.003 MM)
Main:
Main:
Casting Numbers:
Comments:
OHV & INDUSTRIAL VGS413 ALSO
FORD
1.6
98
Cyl Bore:
Stroke: 3.056" (77.622 MM)

1.9370-1.9375" (49.2-49.213 MM)
Rods:
2.1253-2.1261" (53.983-54.003 MM)
Main:
Main:
2737E, 711MAD, 771MAC
Casting Numbers:
Comments:
OHV, PINTO, CAPRI * WASHERS
FORD
1.6
98
FORD
1.6
98
L4
Stroke: 3.063" (77.8 MM)

1.9370-1.9375" (49.2-49.213 MM)
Rods:
2.1255-2.1260" (53.988-54. MM)
Main:
Main:
771M-AC
Casting Numbers:
Comments:
OHV, PINTO, FESTIVA * WASHERS
FORD
1.6
98
Stroke: 3.291" (83.591 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
1.190" (30.226 MM)
3.2675" (82.995 MM)
Rear Seal Diameter:
B630
Casting Numbers:
Comments:
MFI, SOHC, MAZDA, TRACER
FORD
1.7
PINTO,CAPRI
3.188" (80.975 MM)
Thrust Width:
@ #3 *
3.188" (80.975 MM)
Thrust Width:
@ #3 *
PINTO,FESTIVA
3.188" (80.975 MM)
Thrust Width:
@ #3 *
TRACER
104
OHV
78-80
Cyl Bore:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
OHV
76-80
Cyl Bore:
KSG 1.6
70-73
Cyl Bore:
PINTO,FESTIVA
Stroke: 3.056" (77.622 MM)

1.9370-1.9375" (49.2-49.213 MM)
Rods:
2.1253-2.1261" (53.983-54.003 MM)
Main:
Main:
711MAD, 771MAC
Casting Numbers:
Comments:
OHV PINTO, FESTIVA * WASHERS
78-96
3.188" (80.975 MM)
87-92
3.0711-3.0714" (78.006-78.014 MM)

1/16"
1/16"
.951 @ #4
BOBCAT ,IND, MA
63-75
60 VEE
3.5437-3.5440" (90.01-90.018 MM)

Stroke: 2.630" (66.802 MM) *
Cyl Bore:
2.1255-2.1259" (53.990-54.000 MM)
Rods:
#1 2.2436-2.2440" (56.990-57.000 MM)
Main:
1.039-1.041 @ #3
Main:
Thrust Width:
69TM6303-EA
Casting Numbers:
Comments:
SHORT STROKE VERSION OFFERED 1963-1970 1.5L 91 CU" * 91 CU" ENGINE USES A SHORTER
CRANKSHAFT STROKE OF 2.3200" (58.928 MM)
145

Make
Liter
CID
Vin
Model
Year
FORD
FORD
4 Cylinders
1.8
110
Stroke: 3.700" (93.98 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
0290, GN, LH
Casting Numbers:
Comments:
FORD
COURIER
Cyl Bore:
Engine Model
(cont.)
72-78
3.070" (77.978 MM)
@ #5 *
Thrust Width:
MAZDA, COURIER ONLY, TIMING CHAIN * WASHERS
1.8
112
ESCORT,TRACER
91-98
DOHC
3.2679-3.2682" (83.005-83.012 MM)

Stroke: 3.346" (84.988 MM)
Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
.062" (1.575 MM)
Rods:
Rod Fillet:
1.9661-1.9668" (49.939-49.957 MM)
.093
Main:
Main Fillet:
.951 @ #4 *
Main:
Thrust Width:
Balance: Internal
1.1900" (30.226 MM)
3.2670" (82.982 MM)
Rear Seal Diameter:
B657
Casting Numbers:
Comments:
MFI, DOHC, 16V, ESCORT/TRACER, MAZDA/ (998) * WASHERS, O/S AVLBL
FORD
1.9
116
ESCORT
Stroke: 3.460" (87.884 MM)

Cyl Bore:
1.7279-1.7287" (43.889-43.909 MM) *
Rods:
Rod Fillet:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main Fillet:
Main:
Thrust Width:
1.378" (35.001 MM)
3.466" (88.036 MM)
Rear Seal Diameter:
E5EE-AA, E7BB, E7EE-BB, E7EE-CK, E7EE-EK
Casting Numbers:
Comments:
EFI, ESCORT, ROLLER CAM *86 1.8854-1.8862
FORD
1.9
116
Stroke: 3.460" (87.884 MM)

1.7279-1.7287" (43.889-43.909 MM) *
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
1.378" (35.001 MM)
3.466" (88.036 MM)
Rear Seal Diameter:
E7EE-BB, E7EE-EK
Casting Numbers:
Comments:
EFI, ESCORT *86 1.8854-1.8862
FORD
1.9
ESCORT
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
116
FORD
2.0
120
2N
FORD
2.0
87-96
CVH
86-96
CVH
3.2260" (81.94 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.135 @ #3
TRACTORS, 2N,
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
122
CVH
3.2283" (81.999 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.135 @ #3
Stroke: 3.465" (88.011 MM)

Cyl Bore:
1.7279-1.7287" (43.889-43.909 MM) *
Rods:
Rod Fillet:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
1.378" (35.001 MM)
3.466" (88.036 MM)
Rear Seal Diameter:
E4EE-AA, E5EE-BA, E7BB, E7EE-BB, E7EE-BB, E7EE-EK
Casting Numbers:
Comments:
EFI, PFI IN 90->, ROLLER CAM *86 1.8854-1.8862
Stroke: 3.750" (95.25 MM)

2.0935-2.0945" (53.175-53.2 MM)
Rods:
#1 2.2480-2.2490" (57.099-57.125 MM)
Main:
Main:
Balance: Internal
2N, 8N, 9N
Casting Numbers:
Comments:
2N, 8N, 9N NAA, GAS TRACTORS
86-90
3.2280" (81.991 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.135 @ #3
39-54
3.1875-3.1885" (80.963-80.988 MM)

NOT IN PRINT
NOT IN PRINT
1.903 @ #1
CONTOUR
95-05
ZETEC
3.3386-3.3398" (84.800-84.830 MM) 3 STD. P

Stroke: 3.464" (87.985 MM)
Cyl Bore:
1.8461-1.8468" (46.891-46.909 MM)
Rods:
2.2827-2.2834" (57.981-57.998 MM)
Main:
1.131 @ #3
Main:
Thrust Width:
1.378"
938M-R67
Casting Numbers:
Comments:
DOHC, CONTOUR, FOCUS, MYSTIQUE, COUGAR, ESCORT ZX2 ROD DIAMETER IS INCORRECT IN FORD
SERVICE MANUAL. SHOULD BE 46.9MM +/- .01MM.
146

Make
Liter
CID
Vin
Model
Year
FORD
FORD
4 Cylinders
2.0
122
CONTOUR
Engine Model
(cont.)
96-00
ZETEC-CNG
3.3386-3.3398" * (84.8-84.831 MM)

Stroke: 3.4645" (88.000 MM)
Cyl Bore:
1.8461-1.8468" (46.891-46.909 MM)
Rods:
2.2827-2.2834" (57.981-57.998 MM)
Main:
@ #3
Main:
Thrust Width:
1.378"
DOHC, 16V, CONTOUR, MYSTIQUE, 97+ MECH THE ROD DIAMETER IS INCORRECT IN FORD SERVICE
Comments:
MAN.* 3 GRADES FOR STD. BORE DIA, ONE EVERY .0004"
FORD
2.0
122
COURIER
Stroke: 3.858" (97.993 MM)

Cyl Bore:
2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
Thrust Width:
3975, GN, U975
Casting Numbers:
Comments:
SOHC, MAZDA, TYPE MB, COURIER ONLY * WASHERS
FORD
2.0
122
Stroke: 3.390" (86.106 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3598-2.3605" (59.939-59.957 MM)
Main:
Main:
Comments:
DIESEL, MAZDA, ESCORT * WASHERS .081 STD
FORD
2.0
122
FORD
2.0
122
2.0
122
2.0
122
2.0
122
FORD
2.0
122
97-03
3.340" (84.836 MM)
Thrust Width:
1.135-1.136
FOCUS
03-05
Cyl Bore:
3.3386-3.3398" (84.800-84.830 MM)
Cyl Bore:
3.150" (80.01 MM)
81-82
@ #5 *
Thrust Width:
PINTO
71-74
Cyl Bore:
3.578" (90.881 MM)
Thrust Width:
1.262 @ #3
Stroke: 3.031" (76.987 MM)

2.0468-2.0472" (51.989-51.999 MM)
Rods:
2.2437-2.2441" (56.99-57. MM)
Main:
Main:
70HM-AKA, 70HM-AKR, 72HM-JA
Casting Numbers:
Comments:
SOHC, PINTO
Stroke: 3.622" (91.999 MM)

1.8874-1.8880" (47.94-47.955 MM)
Rods:
2.2022-2.2030" (55.936-55.956 MM)
Main:
Main:
FS07, FS-2
Casting Numbers:
Comments:
DOHC, MFI, 16V, PROBE/ (993)
ESCORT
Stroke: 3.031" (76.987 MM)

2.0468-2.0472" (51.989-51.999 MM)
Rods:
2.2437-2.2441" (56.99-57. MM)
Main:
Main:
3.625" (92.075 MM)
Rear Seal Diameter:
70HM-AKA, 70HM-AKR, 72HM-JA
Casting Numbers:
Comments:
SOHC, PINTO
FORD
@ #3 *
Cyl Bore:
Stroke: 3.858" (97.993 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
3975, GN, U975
Casting Numbers:
Comments:
MAZDA, TYPE MB, COURIER ONLY * WASHERS
FORD
84-87
3.386-3.387" (86.004-86.03 MM)
Thrust Width:
Stroke: 3.465" (88.000 MM)

1.8461-1.8468" (46.890-46.910 MM)
Rods:
2.2827-2.2835" (57.980-58.000 MM)
Main:
Main:
Comments:
DOHC, SEFI, 16V
FORD
@ #5 *
ESCORT
Cyl Bore:
Stroke: 3.460" (87.884 MM)

1.7279-1.7287" (43.889-43.909 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Comments:
SOHC, 8 VALVE TRACER, ESCORT, FOCUS, SFI
79-80
3.150" (80.01 MM)
PINTO
74-74
3.578" (90.881 MM)
Cyl Bore:
PROBE
Cyl Bore:
Thrust Width:
147
93-97
3.2677-3.2685" (83.-83.02 MM)
@ #4
SPI

Make
Liter
CID
Vin
Model
Year
FORD
4 Cylinders
2.0
FORD
122
Stroke: 3.126" (79.4 MM)

2.0462-2.0472" (51.973-51.999 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
1D, 2D, E22E-BA, E2ZE-BA, E43E-AC
Casting Numbers:
Comments:
FORD
RANGER
3.518" (89.357 MM)
Thrust Width:
1.200 @ #3
SOHC, RANGER
2.0
122
2.0
122
RANGER
N3A
Stroke: 3.3858" (86.000 MM)

2.0035-2.0043" (50.890-50.910 MM)
Rods:
2.1646-2.1654" (54.980-55.000 MM)
Main:
Main:
Comments:
DOHC, SEFI, 16V ENGINE
FORD
2.0
122
NSD
2.0
1.200 @ #3
-95
3.3858-3.3866" (86.000-86.020 MM)
SCORPIO
-95
3.3858-3.3866" (86.000-86.020 MM)
Cyl Bore:
122
84-85
3.520" (89.408 MM)
SCORPIO
Cyl Bore:
Stroke: 3.3858" (86.000 MM)

2.0035-2.0043" (50.890-50.910 MM)
Rods:
2.1646-2.1654" (54.980-55.000 MM)
Main:
Main:
Comments:
DOHC, SFI, 8V ENGINE
FORD
(cont.)
83-88
Cyl Bore:
Stroke: 3.125" (79.375 MM)

Cyl Bore:
2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
Thrust Width:
1D, 2D, E22E-BA, E2ZE-BA, E43E-AC, E4ZE-AC, XBRO-1145
Casting Numbers:
Comments:
SOHC, RANGER
FORD
Engine Model
TC40
93-04
3.3071-3.3078" (84.000-84.018 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
2.0458-2.0463" (51.963-51.976 MM)
Rods:
2.6755-2.6759" (67.958-67.968 MM)
Main:
Main:
20T, 22T
Casting Numbers:
Comments:
1920, TC 40, IND & TRACTOR, DIESEL, SHIBURA THRUST WASHER THKNS .116-.118
FORD
2.2
133
Stroke: 3.700" (93.98 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
Balance: Internal
1.338" (33.985 MM)
3.542" (89.967 MM)
Rear Seal Diameter:
F201, FE201, FE50
Casting Numbers:
Comments:
EFI, MAZDA, PROBE, 12 VALVE
FORD
2.2
133
FORD
2.2
134
89-92
3.3858-3.3866" (85.999-86.02 MM)
Thrust Width:
1.102 @ #3
Stroke: 3.700" (93.98 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
Balance: Internal
1.338" (33.985 MM)
3.542" (89.967 MM)
Rear Seal Diameter:
F201, FE201, FE50
Casting Numbers:
Comments:
EFI, TURBO, MAZDA, PROBE, 12 VALVE
Stroke: 3.500" (88.9 MM)

2.0856-2.0866" (52.974-53. MM)
Rods:
2.5581-2.5591" (64.976-65.001 MM)
Main:
Main:
Comments:
DIESEL, MAZDA * WASHERS
PROBE
Cyl Bore:
PROBE
89-92
Cyl Bore:
3.3858-3.3866" (85.999-86.02 MM)
Thrust Width:
1.102 @ #3
Cyl Bore:
3.5000" (88.9 MM)
83-84
Thrust Width:
148
@ #3 *
N844

Make
Liter
CID
Vin
Model
Year
FORD
FORD
4 Cylinders
2.2
134
TRACTORS, NAA
Stroke: 3.600" (91.44 MM)

Cyl Bore:
2.2980-2.2988" (58.369-58.39 MM)
Rods:
Rod Fillet:
#1 2.4980-2.4988" (63.449-63.47 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2.6200" (66.548 MM)
Rear Seal Diameter:
310372, 641127, 646318, B9NN-6202-B, C0NN, EAF
Casting Numbers:
Comments:
FORD
Engine Model
(cont.)
54-60
3.4368-3.4388" (87.295-87.346 MM)

.125" (3.175 MM)
.094
1.7570 @ #3
NAA, 600, 700 GAS TRACTOR
2.2
135
TC45
N844L
3.3071-3.3078" (84.000-84.018 MM)

Stroke: 3.9400" (100.000 MM)
Cyl Bore:
2.0458-2.0462" (51.964-51.975 MM)
Rods:
2.6754-2.6760" (67.957-97.9700 MM)
Main:
Main:
Comments:
DIESEL THRUST WASHER THICKNESS STD .115-.117" (2.950-3.000 MM)
FORD
2.3
138
T854B
Stroke: 3.937" (100. MM)

2.3600-2.3610" (59.944-59.969 MM)
Rods:
#1 2.6755-2.6759" (67.958-67.968 MM)
Main:
Main:
Comments:
DIESEL,2110 & 2120 TRACTOR
FORD
2.3
138
Stroke: 3.7008" (94.000 MM)

1.9677-1.9685" (49.980-50.000 MM)
Rods:
2.0465-2.0472" (51.980-52.000 MM)
Main:
Main:
Comments:
ESCAPE HYBRID
FORD
2.3
2110
3.3460-3.3470" (84.988-85.014 MM)
Cyl Bore:
ESCAPE HYBRID
138
05-06
3.4449-3.4461" (87.500-87.530 MM)
Cyl Bore:
T854-B
T854-B
3.346-3.347" (84.988-85.014 MM)

Stroke: 3.937" (100. MM)
Cyl Bore:
2.3602-2.3610" (59.949-59.969 MM)
Rods:
2.6755-2.6769" (67.958-67.993 MM)
Main:
.095-.098 @ #3
Main:
Thrust Width:
Comments:
DIESEL/SHIBURA THRUST WASHER THKNS .095-.098, CRANK HAS BALANCER DRIVE GEAR.
FORD
Stroke:
Rods:
2.3
140
LRG423
3.126" (79.4 MM)

2.0464-2.0472" (51.979-51.999 MM)
2.2050-2.2059" (56.007-56.03 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
Comments:
DISTRIBUTORLESS, 7 MM VALVES
FORD
Stroke:
Rods:
2.3
FORD
2.3
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.199-1.201 @#3
LSG423
140
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 1D, 9613, B9NN-6202-B, D, XBRO-1145
Casting Numbers:
Comments:
OHC
LSG423
Cyl Bore:
3.7795-3.7831" (95.999-96.091 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.199-1.201 @#3
Cyl Bore:
3.781" (96.037 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200" @ #3
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
LRG423
3.7795-3.7831" (95.999-96.091 MM)
140
3.126" (79.4 MM)

2.0464-2.0472" (51.979-51.999 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, D, E2ZE-BA, XBRO-1145
Casting Numbers:
Comments:
INDUSTRIAL/MARINE
Stroke:
Rods:
95-01
Cyl Bore:
74-75
149

Make
Liter
CID
Vin
Model
FORD
4 Cylinders
2.3
FORD
Stroke:
Rods:
140
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, 9613, D, XBRO-1145
Casting Numbers:
Comments:
FORD
Stroke:
Rods:
2.3
140
2.3
140
FORD
2.3
140
FORD
2.3
140
FORD
Thrust Width:
1.200" @ #3
Cyl Bore:
3.775" (95.885 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200 @ #3
Cyl Bore:
3.781" (96.037 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200" @ #3
Cyl Bore:
3.781" (96.037 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200" @ #3
Cyl Bore:
3.781" (96.037 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200" @ #3
2.3
140
3.126" (79.4 MM)

2.0465-2.0472" (51.981-51.999 MM)
Cyl Bore:
3.775" (95.885 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
OHC
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200 @ #3
76-80
79-80
80-84
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, 9613, D, E2ZE-BA, XBRO-1145
Casting Numbers:
Comments:
TURBO, OHC, EFI IN 1981-86, 2BC IN 1980
Stroke:
Rods:
1.000" (25.4 MM)
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
OHC
Stroke:
Rods:
Rod Width:
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, 9613, D, XBRO-1145
Casting Numbers:
Comments:
OHC, TURBO
Stroke:
Rods:
3.781" (96.037 MM)
3.126" (79.4 MM)

2.0465-2.0472" (51.981-51.999 MM)
FORD
76-79
Cyl Bore:
OHC
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, D, XBRO-1145
Casting Numbers:
Comments:
OHC
Stroke:
Rods:
Year
80-87
81-82
150
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
FORD
4 Cylinders
2.3
FORD
Stroke:
Rods:
140
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
2D, 9613, B9NN-6202-B, D, E2ZE-BA
Casting Numbers:
Comments:
FORD
FORD
2.3
140
2.3
140
2.3
140
2.3
140
2.3
140
Thrust Width:
1.200" @ #3
Cyl Bore:
3.679-3.683" (93.447-93.548 MM)
Thrust Width:
1.271" @ #3
Cyl Bore:
3.781" (96.037 MM)
Rod Width:
1.000" (25.4 MM)
Thrust Width:
1.200" @ #3
Cyl Bore:
3.680" (93.472 MM)
Thrust Width:
1.271" @ #3
Cyl Bore:
3.6000-3.6820" (91.44-93.523 MM)
Thrust Width:
1.275" @ #3
Cyl Bore:
3.5866" (91.1 MM)
Thrust Width:
1.222" @ #3
2.3
140
3.126" (79.4 MM)

2.0465-2.0472" (51.981-51.999 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.7795-3.7825" (95.999-96.076 MM)

ROLLED
1.000" (25.4 MM)
ROLLED
1.200" @ #3
#1 2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
Balance: Internal
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, E2ZE-BA
Casting Numbers:
Comments:
TBI, MFI, OHC/1989-90 PASSENGER CAR ALSO
83-86
83-88
85-86
85-86
Stroke: 3.543" (89.992 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.5976-2.5984" (65.979-65.999 MM)
Main:
Main:
Comments:
MMC, DIESEL, TURBO
FORD
1.000" (25.4 MM)
Stroke: 3.307" (83.998 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.465" (88.011 MM)
Rear Seal Diameter:
E43E-AC
Casting Numbers:
Comments:
OHV, HSC, EFI
Stroke:
Rods:
Rod Width:
Stroke: 3.125" (79.375 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.465" (88.011 MM)
Rear Seal Diameter:
E43E-AC
Casting Numbers:
Comments:
HSC , OHV, EFI
FORD
83-85
3.781" (96.037 MM)
2.3982-2.3990" (60.914-60.935 MM)

Main:
Main:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, E2ZE-BA
Casting Numbers:
Comments:
OHC, TURBO, 83-86 EFI, 87-88 MFI, 1990 PASS CAR
FORD
(cont.)
Cyl Bore:
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
FORD
Engine Model
OHC
Stroke: 3.307" (83.998 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.465" (88.011 MM)
Rear Seal Diameter:
E43E-AC
Casting Numbers:
Comments:
HSC, OHV, CARB
Stroke:
Rods:
Year
85-87
85-88
151

Make
Liter
CID
Vin
Model
Year
FORD
FORD
Stroke:
Rods:
4 Cylinders
2.3
140
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
Engine Model
(cont.)
89-98
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.7795-3.7825" (95.999-96.076 MM)

ROLLED
1.000" (25.4 MM)
ROLLED
1.200" @ #3
#1 2.2051-2.2059" (56.01-56.03 MM)

Main:
Main:
Balance: Internal
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
2D, 8F28, 9613, E2ZE-BA, E88EAB, E88E-AB, E89EAB, E89E-AB, E8EEAB, XBRO-1145
Casting Numbers:
Comments:
FORD
Stroke:
Rods:
OHC, MFI/TBI, TRK DUAL PLUG, CAR SINGLE PLUG 91-94 ONLY 1/2 FLANGED THRUST BEARING USED
2.3
140
3.125" (79.375 MM)

2.0465-2.0472" (51.981-51.999 MM)
91-93
3.7795-3.7825" (95.999-96.076 MM)
Cyl Bore:
Rod Width:
2.2051-2.2059" (56.01-56.03 MM)
Main:
Main:
Thrust Width:
1.709" (43.409 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1D, 2D, 9613, E2ZE-BA, E89EAB, E89E-AB, XBRO-1145
Casting Numbers:
Comments:
MFI, OHC, ROLLER CAM
FORD
2.3
140
Stroke: 3.7010" (94.000 MM)

1.9670-1.9680" (49.980-50.000 MM)
Rods:
2.0460-2.0470" (51.980-52.000 MM)
Main:
Main:
Comments:
DOHC, ALUMINUM BLOCK, SFI, 2WD
FORD
2.3
1.200" @ #3
RANGER
Y5A
01-04
3.4440-3.4450" (87.500-87.503 MM)
Cyl Bore:
140
1.000" (25.4 MM)
SCORPIO
-95
3.5276-3.5283" (89.600-89.620 MM)

Stroke: 3.583" (91.000 MM)
Cyl Bore:
2.0035-2.0043" (50.890-50.910 MM)
Rods:
2.1645-2.1654" (54.980-55.000 MM)
Main:
1.0246-1.0266" (26.025-26.075 MM)
Main:
Thrust Width:
Comments:
DOHC, 16V ENGINE THRUST BRG WIDTH (WITHOUT THRUST HALF WASHERS) STD .833-.836"
(21.170-21.230 MM)
FORD
2.3
140
Stroke: 3.307" (83.998 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.465" (88.011 MM)
Rear Seal Diameter:
E43E-AC
Casting Numbers:
Comments:
HSC, OHV, EFI, HO TEMPO
FORD
2.3
141
FORD
2.4
144
85-91
3.6790-3.6830" (93.447-93.548 MM)
Thrust Width:
1.271" @ #3
Cyl Bore:
3.680" (93.472 MM)
Thrust Width:
1.275 @ #3
Stroke: 3.307" (83.998 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.465" (88.011 MM)
Rear Seal Diameter:
E43E-AC, E63E-AC
Casting Numbers:
Comments:
OHV, HSC, EFI
Stroke: 3.600" (91.44 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.6200" (66.548 MM)
Rear Seal Diameter:
310372, C0NN, EAF
Casting Numbers:
Comments:
501 & 701 DIESEL TRACTOR
TEMPO
Cyl Bore:
87-94
IND
501
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
152
61-67
3.563" (90.5 MM)
.125" (3.175 MM)
.125
1.7570 @ #3
501 & 701

Make
Liter
CID
Vin
Model
Year
FORD
4 Cylinders
2.4
FORD
144
GAS
Stroke: 3.600" (91.44 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.6200" (66.548 MM)
Rear Seal Diameter:
310372, C0NN, EAF
Casting Numbers:
Comments:
FORD
2.4
144
YSD-424
2.5
152
2.5
2.5
SCD
153
2.8
172
2.8
172
FORD
2.9
FORD
3.1
192
86-91
3.679-3.683" (93.447-93.548 MM)
Thrust Width:
1.275-1.277 @#3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.900" (99.06 MM)

.125" (3.175 MM)
.094
1.7570 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.8998-3.9018" (99.055-99.106 MM)

.125" (3.175 MM)
.094
1.757 @ #3
53-80
55-60
177
Stroke: 4.000" (101.6 MM)

1.2480-1.2490" (31.699-31.725 MM)
Rods:
1.2480-1.2490" (31.699-31.725 MM)
Main:
Main:
Comments:
MODEL T FORD
Stroke: 3.6000" (91.44 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.6200" (66.548 MM)
Rear Seal Diameter:
B9NN-6302-B, D1NL
Casting Numbers:
Comments:
H/D GAS
TAURUS
Cyl Bore:
Stroke: 3.600" (91.44 MM)

2.2978-2.2988" (58.364-58.39 MM)
Rods:
2.4978-2.4988" (63.444-63.47 MM)
Main:
Main:
2.6200" (66.548 MM)
Rear Seal Diameter:
B9NN-6302-B
Casting Numbers:
Comments:
AGRI-DIESEL
-95
3.6220-3.6228" (92.000-92.020 MM)
Stroke: 3.600" (91.44 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
Balance: Internal
2.6200" (66.548 MM)
Rear Seal Diameter:
310372, B9NN, C0NN, C0NN-C, D1NL, EAF
Casting Numbers:
Comments:
AGRI/IND GAS
FORD
SCORPIO
98-00
3.7795-3.7810" (95.999-96.037 MM)
Cyl Bore:
Stroke: 3.578" (90.881 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.465" (88.011 MM)
Rear Seal Diameter:
E63E-AA, E63E-AB
Casting Numbers:
Comments:
TBI, OHV, HSC, TAURUS/SABLE
FORD
RANGER
Cyl Bore:
152
YSD-424
3.680" (93.472 MM)
Cyl Bore:
Stroke: 3.701" (94.000 MM)

2.1236-2.1242" (53.940-53.955 MM)
Rods:
FRONT 2.4805-2.4811" (63.005-63.020 MM)
Main 1:
REAR 3.1488-3.1496" (79.980-80.000 MM)
Main:
Main 2:
Comments:
2.5L TCI DIESEL, TURBO
FORD
3.563" (90.5 MM)

.125" (3.175 MM)
.125
1.7570 @ #3
GAS TRACTOR
Stroke: 3.402" (86.411 MM)

2.0464-2.0472" (51.979-51.999 MM)
Rods:
2.2051-2.2059" (56.01-56.03 MM)
Main:
Main:
Comments:
SOHC, SFI, RANGER
FORD
(cont.)
61-67
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.360" (85.344 MM)

2.3617-2.3622" (59.987-60. MM)
Rods:
REAR 3.0267-3.0275" (76.878-76.899 MM)
Main 1:
OTHRS 2.7550-2.7560" (69.977-70.002 MM)
Main:
Main 2:
Comments:
MARINE DIESEL
FORD
Engine Model
15-27
Cyl Bore:
3.750" (95.25 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.1335" (104.991 MM)

.125" (3.175 MM)
.094
1.757 @ #3
64-79
153

Make
Liter
CID
Vin
Model
Year
FORD
4 Cylinders
3.1
FORD
192
Stroke: 3.600" (91.44 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.6200" (66.548 MM)
Rear Seal Diameter:
B9NN-6302-B
Casting Numbers:
Comments:
FORD
Engine Model
(cont.)
65-72
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.1300" (104.902 MM)

.125" (3.175 MM)
.094
1.757 @ #3
DIESEL
3.3
200
28-32
MODEL A
3.8750" (98.425 MM) A & B

Stroke: 4.250 OR TRUCK 4.500 (107.95-114.3 MM) A & B
Cyl Bore:
A 1.4980-1.4990"(38.049-38.075 MM), B 1.875" (47
Rods:
A 1.6230-1.6240" (41.224-41.25 MM), B 2.000" (50.8 M
Main:
@ #3
Main:
Thrust Width:
A-6303, A-6303-A
Casting Numbers:
Comments:
MODEL A & B CAR, TRUCK 4.500" STROKE CRANK = 212" COUNTER WEIGHTS ADDED TO B & C
FORD
3.6
220
58-67
3.9370-3.9380" (100.-100.025 MM)

Stroke: 4.524-4.528" (114.91-115.011 MM)
Cyl Bore:
2.4997-2.5005" (63.492-63.513 MM)
***
Rods:
Rod Fillet:
3.0002-3.0010" (76.205-76.225 MM)
***
Main:
Main Fillet:
1.805-1.810@#3*
Main:
Thrust Width:
E1ADDNN-6303-D, E1ADDNN-6303-E
Casting Numbers:
Comments:
DAGENHAM, DORSET, DIESEL * WASHERS *** FILLET RADIUS INCREASED @ ENGINE SERIAL NUMBER
1483140
FORD
3.8
233
5000
Stroke: 4.203" (106.756 MM)

Cyl Bore:
2.6244-2.6252" (66.66-66.68 MM)
Rods:
3.0002-3.0010" (76.205-76.225 MM)
Main:
Main:
Thrust Width:
Comments:
DORSET GAS, EARLY 5000 TRACTORS BEFORE 7/20/68
FORD
3.8
233
FORD
4.0
FORD
4.2
254
1.458 @ #3
254
ESD
Stroke: 4.524" (114.91 MM)

2.6242-2.6250" (66.655-66.675 MM)
Rods:
3.0000-3.0012" (76.200-76.23 MM)
Main:
Main:
Comments:
ESD-442 DIESEL, OHV, D/I T/W THKNS .091-.093
4.1248-4.1268" (104.77-104.821 MM)

.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
1.799-1.801@#4*
2701C
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
1HA6303, 7HA6303, 8HA6303
Casting Numbers:
Comments:
2701C, 2711E, D/I DIESEL
4.2
5000
67-70
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.520" (114.808 MM)

2.6242-2.6250" (66.655-66.675 MM)
FORD
72-78
4.2000" (106.68 MM)
242
4.520" (114.808 MM)

2.6242-2.6250" (66.655-66.675 MM)
3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
713F-6303-AA
Casting Numbers:
Comments:
DSD, DAGENHAM, DORSET, DIESEL * THRUST WASHERS .091-.093" STD
Stroke:
Rods:
5000
1.458 @ #3
5000
Stroke: 4.203" (106.756 MM)

Cyl Bore:
2.6244-2.6252" (66.66-66.68 MM)
Rods:
3.0002-3.0010" (76.205-76.225 MM)
Main:
Main:
Thrust Width:
Comments:
DORSET DIESEL, EARLY 5000 TRACTORS BEFORE 7/20/68
Stroke:
Rods:
65-88
4.200" (106.68 MM)
68-72
ESD-442
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
154
2701C, 2711E
4.220" (107.188 MM)

.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
1.500 @ #3
83-92
4.221" (107.213 MM)

.170-.190" (4.318-4.826 MM)
.170-.190" (4.318-4.826 MM)
1.325-1.340
ESD-442

Make
Liter
CID
Vin
Model
Year
FORD
FORD
Stroke:
Rods:
4 Cylinders
4.2
254
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
713F-6303-AA
Casting Numbers:
FORD
4.220" (107.188 MM)

.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164 TO 42.266 MM)
.170-.190" (4.318-4.826 MM)
1.799-1.801@#4*
DORSET, DIESEL * THRUST WASHERS .091-.093 STD
4.2
256
Stroke: 4.203" (106.756 MM)

2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3714-3.3722" (85.634-85.654 MM)
Main:
Main:
C5NE6303K, C5NE-6303-K
Casting Numbers:
Comments:
5000 GAS TRACTOR AFTER 7/19/68
FORD
(cont.)
69-82
4.520" (114.808 MM)

2.6242-2.6250" (66.655 TO 66.675 MM)
Comments:
Engine Model
4.2
256
5000
68-72
Cyl Bore:
4.400" (111.76 MM)
Thrust Width:
1.458 @ #3
5000
5000
72-78
5000
4.400" (111.76 MM)

Stroke: 4.203" (106.756 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM)
Rods:
3.3713-3.3723" (85.631-85.656 MM)
Main:
1.458 @ #3
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
6110-A, C5NE6303K, C5NE-6303-K
Casting Numbers:
Comments:
DORSET, 5000 AFTER 7/19/68 & 7000, 6700 TRACTORS THRUST BRG LENGTH 1.462
FORD
4.2
256
BSD-442
BSD-442
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 4.203" (106.756 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM) *
Rods:
3.3713-3.3723" (85.631-85.656 MM) *
Main:
1.458 @ #6
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
6110-A, C5NE-K, C5NE-K
Casting Numbers:
Comments:
DIESEL THRUST BRG LENGTH 1.462 * .002,.010,.020,.030 UNDERSIZE BRGS AVLBL
FORD
4.2
256
Stroke: 4.203" (106.756 MM)

2.7496-2.7504" (69.84-69.86 MM) *
Rods:
3.3713-3.3723 *" (85.631-85.656 MM)
Main:
Main:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
6110-A, C5NE-K, C5NE-K
Casting Numbers:
Comments:
TURBO DIESEL THRUST BRG LENGTH 1.462
UNDERSIZE BRGS AVLBL
FORD
4.4
BSD-442T
BSD-442T
Cyl Bore:
4.4007-4.4032" (111.778-111.841 MM)
Thrust Width:
1.458 @ #3
* .002,.010,.020,.030
268
BSD-444
BSD-444
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 4.4000" (111.76 MM)
Cyl Bore:
2.7496-2.7504 *" (69.84-69.86 MM)
Rods:
3.3713-3.3723 *" (85.631-85.656 MM)
Main:
1.458 @ #3
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
D9NN-6110-AA, D9NN-6303-A, D9NN-6303-AA, E5NN-6303-CA, E5NN-6303-FA
Casting Numbers:
Comments:
DORSET DIESEL, 6610 TRACTOR * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
4.4
268
BSD-444T
BSD-444T
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 4.4000" (111.76 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM) *
Rods:
3.3713-3.3723" (85.631-85.656 MM) *
Main:
1.458 @ #3
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
D9NN-6110-AA, D9NN-6303-A, D9NN-6303-AA, E5NN-6303-FA
Casting Numbers:
Comments:
DORSET DIESEL, 7710 TURBO * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
5.0
304
BSD-450T
BSD-450T
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 5.0000" (127. MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM) *
Rods:
3.3713-3.3723" (85.631-85.656 MM) *
Main:
1.458 @ #3
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
Comments:
6640 NON/TURBO & 7740 TURBO TRACTOR * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
155

Make
Liter
CID
Vin
Model
Year
FORD
FORD
Stroke:
Rods:
4 Cylinders
5.0
305
GENESIS
5.0000" (127.000 MM)

2.7490-2.7504" (69.825-69.860 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.3713-3.3723" (85.631-85.656 MM)

Main:
Main:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
DIESEL, TURBO AND NON-TURBO
Comments:
FORD
2.4
144
FALCON
2.4
149
3.500" (88.9 MM)

.125" (3.175 MM)
Thrust Width:
1.265 @ #5
Cyl Bore:
3.150" (80.01 MM)
Thrust Width:
.986 @ #3
2.5
153
2.5
155
84-85
Stroke: 2.921" (74.193 MM)

2.0843-2.0848" (52.941-52.954 MM)
Rods:
2.4382-2.4392" (61.93-61.956 MM)
Main:
Main:
Comments:
60, DOHC, 24 VALVE, PROBE MAZDA ENGINE
FORD
PROBE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2.6
159
Stroke: 2.630" (66.802 MM)

2.1252-2.1260" (53.98-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
2.376" (60.35 MM)
Rear Seal Diameter:
11-448510
Casting Numbers:
Comments:
CAPRI * WASHERS .093 STD
FORD
2.8
170
FORD
2.8
171
95-02
72-73
3.545" (90.043 MM)
Thrust Width:
1.039 @ #3 *
FALCON
61-72
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.265 @ #5
BRONCO
156
DURATEC
@ #4
CAPRI
Stroke: 2.703" (68.656 MM)

Cyl Bore:
2.1251-2.1260" (53.978-54. MM)
Rods:
Rod Fillet:
#1 2.2433-2.2441" (56.98-57. MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.376-2.377" (60.35-60.376 MM)
Rear Seal Diameter:
74TM, 76TM, 78TM, 78TM-CA, 82TM, 82TM-HAA
Casting Numbers:
Comments:
BRONCO & RANGER, 60 V6
99L
3.2440-3.2452" (82.398-82.428 MM)
Cyl Bore:
Stroke: 2.940" (74.676 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.375" (85.725 MM)
Rear Seal Diameter:
1F, C2DE-A, CTR-CB
Casting Numbers:
Comments:
FALCON, MERCURY COMET, MUSTANG
93-99
3.3268-3.3276" (84.501-84.521 MM)

ROLLED
ROLLED
@ #4
CONTOUR
Stroke: 3.130" (79.502 MM)

Cyl Bore:
1.9670-1.9680" (49.962-49.987 MM)
Rods:
2.4790-2.4800" (62.967-62.992 MM)
Main:
Main:
Thrust Width:
Comments:
DOHC 24 VALVE, 99L, CONTOUR, MYSTIQUE, COUGAR .0767" T/W
FORD
60-64
Cyl Bore:
Rod Fillet:
FALCON, MERCURY COMET
Stroke: 3.189" (81.001 MM)

1.7707-1.7713" (44.976-44.991 MM)
Rods:
2.3615-2.3618" (59.982-59.99 MM)
Main:
Main:
1275884
Casting Numbers:
Comments:
TURBO DIESEL, BMW
FORD
GENESIS
6 Cylinders
Stroke: 2.500" (63.5 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.375" (85.725 MM)
Rear Seal Diameter:
CTR-CB
Casting Numbers:
Comments:
(cont.)
4.4007-4.4032" (111.778-111.841 MM)

.120" (3.048 MM)
1.678-1.682" (42.621-42.723 MM)
.120" (3.048 MM)
1.459-1.461"
FORD
FORD
95-99
Engine Model
83-86
3.6610-3.6620" (92.989-93.015 MM)

.078" NON ROLLED (1.981 MM)
.078 ROLLED
1.039-1.041 @#3

Make
Liter
CID
Vin
Model
Year
FORD
6 Cylinders
2.8
FORD
171
Stroke: 2.703" (68.656 MM)

2.1251-2.1260" (53.978-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
2.376" (60.35 MM)
Rear Seal Diameter:
74TM-AA, 78TM, 82TM
Casting Numbers:
Comments:
FORD
2.8
171
2.8
171
2.9
177
2.9
177
2.9
179
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.656" (92.862 MM)

.078" ROLLED (1.981 MM)
1.039 @ #3
2.9
3.0
74
75-77
BRONCO
3.6614-3.6630" (93.-93.04 MM)

5/64 ROLLED
5/64 ROLLED
1.039-1.041 @#3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.656" (92.862 MM)

.078" ROLLED (1.981 MM)
.078" ROLLED (1.981 MM)
1.039-1.041 @#3
87-90
SCORPIO
Cyl Bore:
179
181
86-92
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
BOB
BRG
Stroke: 2.8342" (71.990 MM)

2.1252-2.1260" (53.980-54.000 MM)
Rods:
2.2433-2.2441" (56.980-57.000 MM)
Main:
Main:
Comments:
12V ENGINE
FORD
3.656" (92.862 MM)

.078" NON-ROLLED (1.981 MM)
.078" ROLLED (1.981 MM)
1.039 @ #3
Stroke: 2.8346" (72.000 MM)

2.2433-2.2441" (56.980-57.000 MM)
Main:
Main:
Comments:
24V COSWORTH ENGINE
FORD
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 2.703" (68.656 MM)

2.1251-2.1260" (53.978-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
2.376-2.377" (60.35-60.376 MM)
Rear Seal Diameter:
1.9, 86TM-BA, 88TM-BA, TM-BA
Casting Numbers:
Comments:
MFI, 60 V6, MERKUR
FORD
3.656" (92.862 MM)

.078" ROLLED (1.981 MM)
1.039 @ #3
PX
Stroke: 2.835" (72.009 MM)

2.1251-2.1260" (53.978-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
Balance: Internal
2.376-2.377" (60.35-60.376 MM)
Rear Seal Diameter:
1.9, 86TM-BA, 88TM-BA, 91TM-AA, TM-BA
Casting Numbers:
Comments:
MFI, 60 V6, BRONCO, RANGER
FORD
74-79
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 2.703" (68.656 MM)

2.1251-2.1260" (53.978-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
2.376" (60.35 MM)
Rear Seal Diameter:
78TM, 82TM
Casting Numbers:
Comments:
V6
FORD
CAPRI
(cont.)
2BC, 60 V-6 CAPRI
Stroke: 2.703" (68.656 MM)

2.1251-2.1260" (53.978-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
2.376" (60.35 MM)
Rear Seal Diameter:
78TM, 82TM
Casting Numbers:
Comments:
V6
FORD
Engine Model
3.6618-3.6634" (93.010-93.050 MM)
SCORPIO
-95
Cyl Bore:
3.6618-3.6634" (93.010-93.050 MM)
Thrust Width:
1.039-1.041" (26.390-26.440 MM)
VILLAGER
93-99
3.4252-3.4264" (87.-87.031 MM)

Stroke: 3.268" (83.007 MM)
Cyl Bore:
1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4784-2.4793" (62.951-62.974 MM)
Main:
@ #4
Main:
Thrust Width:
3.3070" (84.000 MM) *
Rear Seal Diameter:
F5
Casting Numbers:
Comments:
SOHC, PFI, VILLAGER NISSAN ENGINE/ (99U) * SILICONE SEAL WAS USED UNTIL 1998 THEN
CHANGED-VITON. SEAL I.D 3.2125" (81.6 MM) SEAL ADAPTOR BORE SIZE 4.0944"
157

Make
Liter
CID
Vin
Model
Year
FORD
FORD
6 Cylinders
3.0
182
Stroke: 3.130" (79.500 MM)

1.9670-1.9680" (49.970-49.990 MM)
Rods:
2.4791-2.4800" (62.969-62.992 MM)
Main:
Main:
SFI, DOHC
Comments:
FORD
3.0
ESCAPE
Cyl Bore:
182
3.0
182
FORD
3.0
183
01-05
96-04
DURATECH
3.5027-3.5051" (88.968-89.029 MM)
TAURUS SHO
Stroke: 3.1299" (79.499 MM)

Cyl Bore:
2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
Thrust Width:
3.510" (89.154 MM)
Rear Seal Diameter:
F5
Casting Numbers:
Comments:
DOHC, YAMAHA, TAURUS SHO, EFI/ (99Y) (99S) * WASHERS
(cont.)
3.5039-3.5051" (89.000-89.030 MM)
TAURUS
Stroke: 3.129" (79.477 MM)

Cyl Bore:
1.9674-1.9681" (49.972-49.990 MM)
Rods:
2.4791-2.4800" (62.969-62.992 MM)
Main:
Main:
E6AE-A, E6AE-AH, E6AE-B, E6AE-C, E6AE-W
Casting Numbers:
Comments:
DOHC, SFI, TAURUS, SEE TB 1773 MAIN TORQUE
FORD
Engine Model
89-95
YAMAHA
3.5039-3.5051" (88.999-89.03 MM)
@ #3 *
AEROSTAR
90-99
3.5039" (88.999 MM)

Stroke: 3.1496" (80. MM)
Cyl Bore:
2.1253-2.1261" (53.983-54.003 MM)
.063" ROLLED (1.6 MM)
Rods:
Rod Fillet:
2.5190-2.5198" (63.983-64.003 MM)
.063" ROLLED (1.600 MM)
Main:
Main Fillet:
1.015-1.017 @#3
Main:
Thrust Width:
3.464" (87.986 MM)
Rear Seal Diameter:
E6AE-A, E6AE-AH, E6AE-B, E6AE-C, E6AE-W, F58E-, F58E-AA, F58E-B, F5AE-AA, F5DECasting Numbers:
Comments:
EFI, 60 V6, AEROSTAR,TAURUS,SABLE,WINDSTAR,RANGER
FORD
3.0
183
86-90
Stroke: 3.1496" (80. MM)

Cyl Bore:
2.1253-2.1261" (53.983-54.003 MM)
Rods:
Rod Fillet:
2.5190-2.5198" (63.983-64.003 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.464" (87.986 MM)
Rear Seal Diameter:
E6AE-A, E6AE-AH, E6AE-B, E6AE-C, E6AE-W, RFE 6AE
Casting Numbers:
Comments:
EFI, 60 V6, CAR & TRUCK
FORD
3.0
183
3.5039" (88.999 MM)

.063 ROLLED" (1.6 MM)
.063 ROLLED
1.015-1.017 @#3
TAURUS
00-03
3.5039" (88.999 MM)

Stroke: 3.1496" (80.000 MM)
Cyl Bore:
2.1253-2.1261" (53.983-54.003 MM)
.063" ROLLED (1.600 MM)
Rods:
Rod Fillet:
2.5190-2.5198" (63.983-64.003 MM)
.063" ROLLED (1.600 MM)
Main:
Main Fillet:
1.015-1.017" @ #3
Main:
Thrust Width:
3.464" (87.986 MM)
Rear Seal Diameter:
E6AE-A, E6AE-AH, E6AE-B, E6AE-C, E6AE-W, F58E, F58E-AA, F58E-B, F5AE-AA, F5DE
Casting Numbers:
Comments:
EFI, 60r V6, TAURUS, RANGER
FORD
3.0
183
Stroke: 3.1496" (80. MM)

2.1253-2.1261" (53.983-54.003 MM)
Rods:
2.5190-2.5198" (63.983-64.003 MM)
Main:
Main:
3.464" (87.986 MM)
Rear Seal Diameter:
F58E, F5DE
Casting Numbers:
Comments:
EFI, 60 V6, TAURUS, ETHANOL FUEL
FORD
3.0
183
Stroke: 3.1496" (80. MM)

2.1253-2.1261" (53.983-54.003 MM)
Rods:
2.5190-2.5198" (63.983-64.003 MM)
Main:
Main:
3.464" (87.986 MM)
Rear Seal Diameter:
F58E, F5DE
Casting Numbers:
Comments:
EFI, 60 V6, METHANOL FUEL, 12 VALVE
TAURUS
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
TAURUS
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
158
96-03
3.5039" (88.999 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
1.015-1.017 @#3
97-03
3.5039" (88.999 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
1.015-1.017 @#3
VULCAN

Make
Liter
CID
Vin
Model
Year
FORD
FORD
6 Cylinders
3.2
195
TAURUS SHO
Stroke: 3.1496" (80. MM)

Cyl Bore:
2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
Thrust Width:
Balance: Internal
3.510" (89.154 MM)
Rear Seal Diameter:
DOHC, TAURUS SHO, 60 YAMAHA, EFI/ (99P) * WASHERS
Comments:
FORD
3.3
200
3.3
200
FORD
3.3
200
63-79
FORD
3.3
201
Stroke: 3.270" (83.000 MM)

1.9667-1.9675" (49.955-49.974 MM)
Rods:
2.4784-2.4793" (62.951-62.975 MM)
Main:
Main:
Comments:
SOHC, SFI, FREE-WHEELING ENGINE
FORD
3.5
3.5
80-82
3.680" (93.472 MM)
Thrust Width:
1.271 @ #5
Cyl Bore:
3.680" (93.472 MM)
Thrust Width:
1.265 @ #5
83
VILLAGER
Cyl Bore:
FORD
3.7
99-02
3.6024-3.6035" (91.500-91.530 MM)
215
52-53
216
Stroke: 3.360" (85.344 MM)

2.3617-2.3622" (59.987-60. MM)
Rods:
REAR 3.0267-3.0275" (76.878-76.899 MM)
Main 1:
OTHRS 2.7550-2.7560" (69.977-70.002 MM)
Main:
Main 2:
Comments:
MARINE DIESEL
Stroke: 3.6000" (91.440 MM)

2.2984-2.2988" (58.379-58.389 MM)
Rods:
2.4980-2.4988" (63.449-63.470 MM)
Main:
Main:
Comments:
GAS, CAR ONLY
1.265 @ #5
Cyl Bore:
Stroke: 3.600" (91.44 MM)

Cyl Bore:
2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
Thrust Width:
2.625" (66.675 MM)
Rear Seal Diameter:
C1AE-B, C1AE-F, C3AE-M, EAA, EAA-6303B, EBF, EBP
Casting Numbers:
Comments:
OHV, GAS
FORD
3.680" (93.472 MM)
Stroke: 3.125" (79.375 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.374" (85.7 MM)
Rear Seal Diameter:
1H, 3H, E1BE-CC
Casting Numbers:
Comments:
1BC
YAMAHA
@ #3 *
Stroke: 3.125" (79.375 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.374" (85.7 MM)
Rear Seal Diameter:
1G, 1H, 1HA, 3H, E1BE-BB, E1BE-CC
Casting Numbers:
Comments:
1BC
(cont.)
3.6220-3.6232" (91.999-92.029 MM)
Stroke: 3.125" (79.375 MM)

Cyl Bore:
2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Thrust Width:
3.3745" (85.712 MM)
Rear Seal Diameter:
1G, 1H, 1HA, C3OE-A, C3OZ-A, C3OZ-E, C5DE-A
Casting Numbers:
Comments:
1BC
FORD
93-95
Engine Model
1.3610 @ #3
YSD-635
YSD-635
Cyl Bore:
3.680" (93.472 MM)
Cyl Bore:
3.6250" (92.075 MM)
Thrust Width:
@ #3
223
54-64
159
CAR
3.5625" (90.488 MM)

Make
Liter
CID
Vin
Model
FORD
Year
Engine Model
6 Cylinders
3.7
FORD
223
(cont.)
54-64
3.6250" (92.075 MM)

Stroke: 3.6000" ( 91.440 MM)
Cyl Bore:
1.9982-1.9990" (50.754-50.775 MM)
Rods:
2.4982-2.4990" (63.454-63.475 MM)
Main:
2.2570 @ #3
Main:
Thrust Width:
3AE-F, 91A-6303-A, 91A-6303-B, 91H-6303-B, C1AE-B, C1AE-F, C3AE-M, EAA, EBF, EBP
Casting Numbers:
Comments:
FORD
GAS
3.7
226
Stroke: 4.400" (111.76 MM)

2.2343-2.2351" (56.748-56.771 MM)
Rods:
2.4986-2.4994" (63.464-63.485 MM)
Main:
Main:
5GA
Casting Numbers:
Comments:
L-HEAD= FLATHEAD, 90 HP CAR, ALSO IN GTB JEEP
41-47
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.300" (83.82 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.7570
Stroke: 4.400" (111.76 MM)

Cyl Bore:
2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.8732-2.8740" (72.980-7300 MM)
Main:
Main:
Thrust Width:
1HA, 1HA-6303, 2GA, 7HA, 7HA-6303, 8HA, 8HA-6303, 8MTH
Casting Numbers:
Comments:
L-HEAD= FLATHEAD, GAS TRUCK
3.300" (83.82 MM)
FORD
FORD
3.7
3.8
226
232
47-52
82-87
Stroke: 3.386" (86.004 MM)

Cyl Bore:
2.3099-2.3110" (58.671-58.699 MM)
Rods:
Rod Fillet:
2.5186-2.5198" (63.972-64.003 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.750" (95.25 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1P, 6303, E2AE, E2AE-AF, E2AE-DB, E3AE, E3AE-AA
Casting Numbers:
Comments:
EFI
FORD
3.8
232
3.8
232
3.8110" (96.799 MM)

5/64 (.078)
5/64 ROLLED
1.170 @ #3
84-85
Stroke: 3.3860" (86.004 MM)

Cyl Bore:
2.3099-2.3110" (58.671-58.699 MM)
Rods:
Rod Fillet:
2.5186-2.5198" (63.972-64.003 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.750" (95.25 MM)
3.625" (92.075 MM)
Rear Seal Diameter:
1P, 6303, E2AE, E2AE-AF, E2AE-DB, E3AE, E3AE-AA
Casting Numbers:
Comments:
CAR
FORD
1.3610" (34.569 MM)
3.8110" (96.799 MM)

.078" (1.981 MM)
.078" ROLLED (1.981 MM)
1.170 @ #3
88-95
3.811" (96.799 MM)

Stroke: 3.386" (86.004 MM)
Cyl Bore:
2.3103-2.3111" (58.682-58.702 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
1-4 2.5190-2.5198" (63.983-64.003 MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.170-1.172 @ #3
Main:
Thrust Width:
3.750" (95.25 MM)
3.6250" (92.075 MM)
Rear Seal Diameter:
6303, E2AE-AF, E3AE, E3AE-AA, E6EE, E90E-BB, E9DE, E9DE-BA, E9DE-BB, E9SE-BA
Casting Numbers:
Comments:
PFI & SFI, NON-SUPERCHARGED
FORD
3.8
232
89-95
Stroke: 3.386" (86.004 MM)

Cyl Bore:
2.3103-2.3111" (58.682-58.702 MM)
Rods:
Rod Fillet:
1-3 2.5190-2.5198" (63.983-64.003 MM)
Main 1:
Main Fillet:
4 2.5092-2.5098" (63.734-63.749 MM) ** SUPERCHARGE
Main:
Main 2:
Thrust Width:
3.750" (95.25 MM)
3.6250" (92.075 MM)
Rear Seal Diameter:
6303, E9DE-BA, E9DE-BB, E9SE-CB, F0SE-AA, F4SE-BB
Casting Numbers:
Comments:
PFI, SUPERCHARGED/ (99R) * 1-3 = .0009-.0026"
SUPERCHARGED ONLY
160
3.811" (96.799 MM)

.078" (1.981 MM)
.078 ROLLED
1.170-1.172 @#3
**

Make
Liter
CID
Vin
Model
Year
FORD
FORD
6 Cylinders
3.8
232
Stroke: 3.386" (86.004 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
1-4 2.5190-2.5198" (63.983-64.003 MM)
Main:
Main:
3.750" (95.25 MM)
3.625-3.630" (92.075-92.202 MM)
Rear Seal Diameter:
1F2E, F68E-BA, F8AE-BA
Casting Numbers:
Comments:
FORD
3.9
238
3.9
240
4.0
242
FORD
4.0
244
3.307" (83.998 MM)

2.1252-2.1260" (53.98-54. MM)
2.2430-2.2440" (56.972-56.998 MM)

Main:
Main:
Balance: Internal
2.376" (60.35 MM)
Rear Seal Diameter:
97JM, 97JM
Casting Numbers:
Comments:
SOHC, SFI, EXPLORER, MOUNTAINEER
FORD
Stroke:
Rods:
4.0
244
FREESTAR
3.8118" (96.820 MM)
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.200 @ #5
65-74
6000
60-70
Cyl Bore:
3.625" (92.075 MM)
Thrust Width:
1.360 @ #3
EXPLORER,MOU
FORD
4.0
245
SOHC
3.9527-3.9543" (99.712-100.439 MM)

ROLLED
.822" (20.879 MM)
ROLLED
1.039-1.041 @#3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.9527-3.9543" (100.399-100.439 MM)

ROLLED
.822" (20.879 MM)
ROLLED
1.039-1.041 @#3
90-02
2.2433-2.2441" (56.98-57. MM)

Main:
Main:
Balance: Internal
2.376" (60.35 MM)
Rear Seal Diameter:
90TM-6303-AB, 90TM-AA, 90TM-AB, 96TM-AA, 97TM-, F5TZ-6012-AA, X
Casting Numbers:
Comments:
OHV, MFI, 60 V-6, ROLLER CAM, TRUCK THRUST BRG LENGTH STD 1.035
HOLE DIAMETER IS 1.124"
Stroke: 3.323" (84.400 MM)
2.1252-2.1260" (53.980-54.000 MM)
Rods:
2.2433-2.2441" (56.980-57.000 MM)
Main:
Main:
2.376" (60.350 MM)
Rear Seal Diameter:
97JM
Casting Numbers:
Comments:
SOHC, SFI, EXPLORER
97-01
6000
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.307" (83.998 MM)

2.1252-2.1260" (53.98-54. MM)
04-05
Cyl Bore:
Stroke: 3.900" (99.06 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2701-6303-E, C3NN6303B
Casting Numbers:
Comments:
Stroke:
Rods:
96-04
3.8103-3.8118" (96.781-96.819 MM)

5/64 (.078)
5/64 ROLLED
1.170-1.172 @#3
Stroke: 3.180" 80.772 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
2.6225" (66.612 MM)
Rear Seal Diameter:
1L, 1LA, 1LAB
Casting Numbers:
Comments:
1BC, TRUCK
FORD
(cont.)
PFI & SFI, WINDSTAR & MUSTANG
Stroke: 3.4646" (88.000 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
1,2,3 2.5188-2.5196" (63.978-63.998 MM)
Main:
3.625" (92.075 MM)
Main:
Rear Seal Diameter:
4F2E-AA
Casting Numbers:
Comments:
FREESTAR & MUSTANG
FORD
WINDSTAR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
EXPLORER
PILOT BUSHING
00-04
Cyl Bore:
3.953" (100.400 MM)
Thrust Width:
1.039-1.041" (26.390-26.440 MM) @ #3
161

Make
Liter
CID
Vin
Model
Year
FORD
6 Cylinders
4.1
FORD
250
Stroke: 3.906" (99.212 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
3.6250" (92.075 MM)
Rear Seal Diameter:
2H, 2HA, 2H-A, 2HAB, C9DE-A
Casting Numbers:
Comments:
FORD
(cont.)
69-80
Cyl Bore:
3.688" (93.675 MM)
Thrust Width:
1.200 @ #5
Cyl Bore:
3.688" (93.675 MM)
Thrust Width:
1.200 @ #5
1BC
4.1
250
Stroke: 3.906" (99.212 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
3.625" (92.075 MM)
Rear Seal Diameter:
2H, 2HA, 2H-A, 2HAB, C9DE-A
Casting Numbers:
FORD
Engine Model
4.2
256
79-81
F150
97-04
3.8110" (96.799 MM)

Stroke: 3.7400" (94.996 MM)
Cyl Bore:
2.3103-2.3111" (58.682-58.702 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
2.5190-2.5198" (63.983-64.003 MM)
.078 ROLLED
Main:
Main Fillet:
1.170-1.172 @#3
Main:
Thrust Width:
3.750" (95.25 MM)
3.6250" (92.075 MM)
Rear Seal Diameter:
Comments:
OHV, SFI, F-150 PICKUP, E150, E250, E350 THRUST BRG LENGTH STD 1.166" (29.616 MM)
FORD
4.3
262
Stroke: 4.030" (102.362 MM)

2.2980-2.2988" (58.369-58.39 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.625" (66.675 MM)
Rear Seal Diameter:
C1TE, C1TE-H, C3TE, C3TE-C, C4TE-C
Casting Numbers:
Comments:
GAS, TRUCK
FORD
4.9
61-64
Cyl Bore:
3.719" (94.463 MM)
Thrust Width:
1.400 @ #3
300
CSG-649
65-93
CSG-649
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
Balance: Internal
1.3750" (34.925 MM)
3.7500" (95.25 MM)
Rear Seal Diameter:
1N, 1NA, 1NAB, 1NABC, 2N, 2NA, 2NAB, 2NABC, C5TE, C5TE-C, C5TE-F, C5TZ-A, C5TZ-B, C6TE-G
Casting Numbers:
Comments:
4.9L GAS INDUSTRIAL
FORD
4.9
300
73-79
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
1.375" (34.925 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
TRUCK
FORD
4.9
300
76-85
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
Balance: Internal
1.3750" (34.925 MM)
3.7500" (95.25 MM)
Rear Seal Diameter:
1N, 1NA, 1NAB, 1NABC, 2N, 2NA, 2NAB, 2NABC, C5TE, C5TE-C, C5TE-F, C5TZ-A, C5TZ-B, C6TE-G,
Casting Numbers:
F1AE-AD
Comments:
TRUCK
162

Make
Liter
CID
Vin
Model
FORD
Year
6 Cylinders
4.9
FORD
300
Engine Model
(cont.)
78
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
1.375" (34.925 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
FORD
TRUCK
4.9
300
78-79
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
1.375" (34.925 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
TRUCK
FORD
4.9
300
82-84
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
Balance: Internal
1.375" (34.925 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
TRUCK
FORD
4.9
300
83-84
4.000" (101.6 MM)

Stroke: 3.980" (101.092 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.200 @ #5
Main:
Thrust Width:
1.375" (34.925 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
1N, 1NA, 1NAB, 1NABC, 2N, 2NA, 2NAB, 2NABC, C5TE, C5TE-C, C5TE-F, C5TZ-A, C5TZ-B, C6TE-G,
Casting Numbers:
F1AE-AD
Comments:
TRUCK
FORD
4.9
300
Stroke: 3.980" (101.092 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
Balance: Internal
1.375" (34.925 MM)
3.750" (95.25 MM)
Rear Seal Diameter:
1N, 1NA, 1NAB, 1NABC, 2NABC
Casting Numbers:
Comments:
TRUCK
85-86
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.200 @ #5
Stroke: 3.980" (101.092 MM)

Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
1.3750" (34.925 MM)
3.7500" (95.25 MM)
Rear Seal Diameter:
1N, 1NA, 1NAB, 1NABC, 2NABC, C5TE-F, C6TE-G, F1AE-AD
Casting Numbers:
4.000" (101.6 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.200 @ #5
FORD
4.9
300
85-86
163

Make
Liter
CID
Vin
Model
Year
FORD
6 Cylinders
4.9
FORD
300
FORD
4.0000-4.0048" (101.6-101.722 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.200 @ #5
EFI, MFI, GAS
5.4
330
Stroke: 4.528" (115.011 MM)

2.4997-2.5002" (63.492-63.505 MM)
Rods:
3.0002-3.0010" (76.205-76.225 MM)
Main:
Main:
508E-6303
Casting Numbers:
Comments:
DAGENHAM, DORSET, DIESEL * WASHERS
FORD
(cont.)
87-96
Stroke: 3.980" (101.092 MM)

Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
Rod Fillet:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
1.3750" (34.925 MM)
3.7500" (95.25 MM)
Rear Seal Diameter:
1N, 1NA, 1NAB, 1NABC, 2NABC, C5TE-F, C6TE-G, F1AE-AD
Casting Numbers:
Comments:
Engine Model
5.9
58-69
3.937" (100. MM)
.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
@ #4 *
Thrust Width:
359
FD-1060
95-00
B-SERIES
4.0157-4.0203" (102.000-102.116 MM)

Stroke: 4.7244" (120.000 MM)
Cyl Bore:
2.7150-2.7170" (68.962-69.012 MM)
.15625" (3.969 MM)
Rods:
Rod Fillet:
3.2662-3.2682" (82.962-83.013 MM)
.15625" (3.969 MM)
Main:
Main Fillet:
1.475-1.477" @ #6
Main:
Thrust Width:
5.115" (129.921 MM)
Rear Seal Diameter:
3907804
Casting Numbers:
Comments:
DIESEL, CUMMINS B-SERIES THRUST BRG LENGTH STD 1.430-1.470" (36.322-37.338 MM)
FORD
5.9
362
ESD
Stroke: 4.524" (114.91 MM)

2.4997-2.5005" (63.492-63.513 MM)
Rods:
3.0000-3.0012" (76.2-76.23 MM)
Main:
Main:
Comments:
ESD-659 DIESEL, OHV, D/I T/W THKNS .091-.093
FORD
Stroke:
Rods:
5.9
ESD-659
4.126" (104.8 MM)
.170-.190" (4.318-4.826 MM)
.170-.190" (4.318-4.826 MM)
1.325-1.340
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.1248-4.1268" (104.77-104.821 MM)

.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
1.799-1.801@#4*
362
69-82
4.520" (114.808 MM)

2.4997-2.5005" (63.492-63.513 MM)
3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
713F-6303-AA
Casting Numbers:
Comments:
DSD 362, DORSET, DIESEL * THRUST WASHERS .091-.093 STD
FORD
Stroke:
Rods:
6.0
363
Cyl Bore:
Rod Fillet:
Rod Width:
3.0002-3.0010" (76.205-76.225 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
2703/C DIESEL, OHV, DIR INJ THRUST WASHER THKNS .091-.093 STD
6.0
363
ESD
Stroke: 4.524" (114.91 MM)

2.6242-2.6250" (66.655-66.675 MM)
Rods:
3.0002-3.0010" (76.205-76.225 MM)
Main:
Main:
Comments:
ESD-660T TURBO DIESEL, OHV, D/I, 2728T
FORD
Stroke:
Rods:
6.0
4.520" (114.808 MM)

2.6242-2.6250" (66.655-66.675 MM)
363
DSD-362
2703/C
4.520" (114.808 MM)

2.4997-2.5005" (63.492-63.513 MM)
FORD
ESD-659
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2703/C
4.125" (104.775 MM)
.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
1.799-1.801 @#4
ESD-660T
ESD-660T
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.126" (104.8 MM)

.170-.190" (4.318-4.826 MM)
.170-.190" (4.318-4.826 MM)
1.325-1.340
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.1248-4.1268" (104.77-104.821 MM)

.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
1.799-1.801@#4*
64-70
3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
713F-6303-AA
Casting Numbers:
Comments:
DSD, DAGENHAM, DORSET, DIESEL * THRUST WASHERS .091-.093 STD
164

Make
Liter
CID
Vin
Model
Year
FORD
FORD
Stroke:
Rods:
6 Cylinders
6.2
380
4.5200" (114.808 MM)

2.6242-2.6250" (66.655-66.675 MM)
#1 3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
DIESEL, 2715E, 2704C, DIR INJ, OHV
Comments:
FORD
6.2
380
6.2
380
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
ESD
Stroke: 4.524" (114.91 MM)

2.6242-2.6250" (66.655-66.675 MM)
Rods:
3.0000-3.0012" (76.2-76.23 MM)
Main:
Main:
Comments:
ESD-662 DIESEL, OHV, D/I
FORD
Stroke:
Rods:
6.2
2725
4.2200-4.2220" (107.188-107.239 MM)
.170-.190" (4.318-4.826 MM)
.170-.190" (4.318-4.826 MM)
1.325-1.340"
ESD-662
ESD-662
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.2200-4.2220" (107.188-107.239 MM)

.170-.190" (4.318-4.826 MM)
.170-.190" (4.318-4.826 MM)
1.325-1.340
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.220" (107.188 MM)

.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
1.799-1.801@#4*
69-82
3.0002-3.0010" (76.205-76.225 MM)

Main:
Main:
713F-6303-AA
Casting Numbers:
Comments:
DSD, DORSET, DIESEL * THRUST WASHERS .091-.093 STD
6.6
2715E & 2704C

4.2200-4.2220" (107.188-107.238 MM)
.170-.190" (4.318-4.826 MM)
1.660-1.664" (42.164-42.266 MM)
.170-.190" (4.318-4.826 MM)
380
4.520" (114.808 MM)

2.6242-2.6250" (66.655-66.675 MM)
FORD
(cont.)
2725
Stroke: 4.524" (114.910 MM)

2.6242-2.6250" (66.655-66.675 MM)
Rods:
3.0000-3.0012" (76.200-76.230 MM)
Main:
Main:
Comments:
DIESEL, 2725, NATURALLY ASPIRATED
FORD
2715E
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Engine Model
401
BSD-666
68-82
BSD-666
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 4.400" (111.76 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM) *
.120-.140" (3.048-3.556 MM)
Rods:
Rod Fillet:
3.3713-3.3723" (85.631-85.656 MM) *
.120-.140" (3.048-3.556 MM)
Main:
Main Fillet:
1.460 @ #5
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
C7NN-6303
Casting Numbers:
Comments:
DIESEL TRACTOR, D/I, 8600, 9600 * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
6.6
401
BSD-666T
68-94
BSD-666T
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 4.400" (111.76 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM) *
.120-.140" (3.048-3.556 MM)
Rods:
Rod Fillet:
3.3713-3.3723" (85.631-85.656 MM) *
.120-.140" (3.048-3.556 MM)
Main:
Main Fillet:
1.460 @ #5
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
C7NN-6303, C7NN-6303-A, E3HN-6303-AA
Casting Numbers:
Comments:
TURBO DIESEL, D/I 8000 & 9000 SERIES TRACTORS * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
6.6
401
BSD-666T(2)
68-82
BSD-666T(2)
4.4007-4.4032" (111.778-111.841 MM)

Stroke: 4.400" (111.76 MM)
Cyl Bore:
2.7496-2.7504" (69.84-69.86 MM) *
.120-.140" (3.048-3.556 MM)
Rods:
Rod Fillet:
3.3713-3.3723" (85.631-85.656 MM) *
.120-.140" (3.048-3.556 MM)
Main:
Main Fillet:
1.460 @ #5
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
C7NN-6303, C7NN-6303-A, E3HN-6303-AA
Casting Numbers:
Comments:
TURBO DIESEL, D/I 9600, 9700, TW20 & 30 TRACTORS * .002,.010,.020,.030,.040 UNDERSIZE BRGS AVLBL
FORD
6.6
401
TRUCK
Stroke: 4.402" (111.811 MM)

Cyl Bore:
2.7500-2.7504" (69.85-69.86 MM)
Rods:
Rod Fillet:
3.3718-3.3723" (85.644-85.656 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
E3HN-6303-AA, E3HN-6303-AB, E6HN-6303-CB, E6HN-6303-CC
Casting Numbers:
Comments:
TURBO DIESEL TRUCK * O/S FLG AVLBL
165
86-98
4.4007-4.4030" (111.778-111.836 MM)

.120-.140" (3.048-3.556 MM)
.120-.140" (3.048-3.556 MM)
1.460 @ #5*

Make
Liter
CID
Vin
Model
Year
FORD
FORD
Stroke:
Rods:
6 Cylinders
7.5
456
GENESIS
5.0000" (127. MM)

2.7490-2.7504" (69.825-69.86 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.3713-3.3723" (85.631-85.656 MM)

Main:
Main:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
Comments:
FORD
7.5
456
7.5
(cont.)
GENESIS
4.4007-4.4032" (111.778-111.841 MM)

.120" (3.048 MM)
1.678-1.682" (42.621-42.723 MM)
.120" (3.048 MM)
1.459-1.461
TRACTOR
Stroke: 5.0000" (127.000 MM)

2.7490-2.7504" (69.840-69.860 MM)
Rods:
3.3713-3.3723" (85.631-85.656 MM)
Main:
Main:
4.808-4.814" (122.120-122.280 MM)
Rear Seal Diameter:
Comments:
TURBO DIESEL, 8670, 8770, 8870 & 8970 TRACTORS
FORD
95-99
Engine Model
456
Cyl Bore:
4.4007-4.4032" (111.778-111.841 MM)
Thrust Width:
1.459-1.461" (37.060-37.110 MM)
TRACTOR, GEMI
5.0000" (127. MM)

2.7490-2.7504" (69.825-69.86 MM)
95-99
GEMINI
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.4007-4.4032" (111.778-111.841 MM)

.120-.140" (3.048-3.556 MM)
1.678-1.682" (42.621-42.723 MM)
.120-.140" (3.048-3.556 MM)
1.459-1.461
Stroke: 5.200" (132.08 MM)

Cyl Bore:
2.7500-2.7504" (69.85-69.86 MM)
Rods:
Rod Fillet:
3.3718-3.3726" (85.644-85.664 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.808-4.814" (122.123-122.276 MM)
Rear Seal Diameter:
E5HN-6303-AC, E5HN-6303-AD, E5HN-6303-CC
Casting Numbers:
Comments:
TURBO DIESEL TRUCK * O/S FLG AVLBL
4.4007-4.4030" (111.778-111.836 MM)

.200-.220" (5.08-5.588 MM)
.120-.140
1.460 @ #5 *
Stroke:
Rods:
3.3713-3.3723" (85.631-85.656 MM)

Main:
Main:
4.8080-4.8140" (122.123-122.276 MM)
Rear Seal Diameter:
Comments:
FORD
FORD
7.8
8.3
474
86-95
505
FD-1460
Stroke: 5.3150" (135.000 MM)

2.9916-2.9926" (75.962-76.013 MM)
Rods:
3.8568-3.8595" (97.962-98.031 MM)
Main:
Main:
5.1171-5.1191" (129.975-130.025 MM)
Rear Seal Diameter:
390562, 3914584, 3917320
Casting Numbers:
Comments:
DIESEL, CUMMINS C-SERIES
Thrust Width:
1.6919-1.6959" (42.975-43.076 MM) @ #4
8 Cylinders
2.2
136
OLDER
Stroke: 3.2000" (81.28 MM)

1.5980-1.5990" (40.589-40.615 MM)
Rods:
1.9980-1.9990" (50.749-50.775 MM)
Main:
Main:
60 HP, SMALL ROD & MAIN
Comments:
FORD
2.2
136
3.4
207
37-40
Cyl Bore:
2.6000" (66.04 MM)
Cyl Bore:
2.6000" (66.04 MM)
OLD
Stroke: 3.2000" (81.28 MM)

1.6980-1.6990" (43.129-43.155 MM)
Rods:
2.0980-2.0990" (53.289-53.315 MM)
Main:
Main:
Comments:
60 HP, LARGE ROD & MAIN
FORD
CUMMINS C-S
4.4882-4.4897" (114.000-114.040 MM)
FORD
FORD
95-00
Cyl Bore:
40
TAURUS SHO
96-99
3.2441-3.2453" (82.4-82.431 MM)

Stroke: 3.1300" (79.502 MM)
Cyl Bore:
1.9675-1.9685" (49.975-50. MM)
Rods:
2.4794-2.4803" (62.977-63. MM)
Main:
Main:
Comments:
DOHC, TAURUS SHO, 32 VALVE, 60, YAMAHA ENGINE * 3 STD BORE SIZES
166
YAMAHA

Make
Liter
CID
Vin
Model
Year
FORD
FORD
8 Cylinders
3.6
221
MERCURY COME
Engine Model
(cont.)
62-63
3.500" (88.9 MM)

Stroke: 2.870" (72.898 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
1.1390 @ #3
Main:
Thrust Width:
3.623-3.625" (92.024-92.075 MM)
Rear Seal Diameter:
1M, 1MA, C2OZ, C2OZ-B, C3AE-F, C3AE-N, C3AF-N, C3OE-B, C3OZ, C3OZ-B
Casting Numbers:
Comments:
FORD
MERCURY COMET, FORD FAIRLANE, FALCON
3.6
221
37-45
3.0625" (77.788 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
1.9980-1.9990" (50.749-50.775 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM) *
Main:
Main:
91A-6303A, 91A-6303B, 91H-6303B
Casting Numbers:
Comments:
L HEAD "FLATHEAD V8" TRUCK, 85-90 HP * 2.398-2.399" (60.909-60.934 MM) USED ON SOME ENGINES
FORD
3.9
239
46-53
3.1875" (80.963 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.1380-2.1390" (54.305-54.331 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
2.2570 @ #3
Main:
Thrust Width:
2.6225" (66.612 MM)
Rear Seal Diameter:
1BA, 1BA-6303-A, 1BA-6303-B, 29A-6303-A, 29B-6303-B, 2BA, 8BA, 99A-6303, BA-6303, EAB, OBA
Casting Numbers:
Comments:
L HEAD "FLATHEAD V8" 3.750" STROKE
FORD
3.9
239
OHV
Stroke: 3.100" (78.74 MM)

2.1880-2.1888" (55.575-55.596 MM)
Rods:
#1 2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.625"
Rear Seal Diameter:
EBU, EBU-6303-A
Casting Numbers:
Comments:
OHV, 239.4, WARNING SEE CAMSHAFT SECTION
FORD
3.9
241
4.2
3.500" (88.9 MM)
Thrust Width:
1.125 @ #3
Stroke: 3.350" (85.000 MM)

1.9675-1.9685" (49.976-50.000 MM)
Rods:
2.4794-2.4803" (62.976-63.000 MM)
Main:
Main:
Comments:
SFI, THUNDERBIRD TOO
FORD
54
Cyl Bore:
LINCOLN LS
Cyl Bore:
255
V-8
49-53
Stroke: 4.0000" (101.6 MM)

Cyl Bore:
2.1385-2.1395" (54.318-54.343 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
Comments:
L HEAD "FLATHEAD V8" TRUCK, MERCURY, 4.00" STROKE
FORD
4.2
255
FORD
4.2
256
Stroke: 3.100" (78.74 MM)

2.1880-2.1888" (55.575-55.596 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
EBU, EBU-6303-A
Casting Numbers:
Comments:
TRUCK "FLATHEAD V8"
FORD
4.3
260
3.1875" (80.963 MM)
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
1J, 1JA, 2, 2J
Casting Numbers:
Comments:
CAR & TRUCK
00-04
3.2441-3.2453" (82.400-82.430 MM)
80-82
Cyl Bore:
3.688" (93.675 MM)
Thrust Width:
1.137 @ #3
Cyl Bore:
3.625" (92.075 MM)
Thrust Width:
1.1260 @ #3
V8
44-55
MERCURY METE
63-64
3.797" (96.444 MM)

Stroke: 2.870" (72.898 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
1.135-1.140 @#3
Main:
Thrust Width:
3.623-3.625" (92.024-92.075 MM)
Rear Seal Diameter:
1M, 1MA, 3M, C2OZ, C2OZ-B, C3AE-F, C3AE-N, C3AF-N, C3OZ, C3OZ-B
Casting Numbers:
Comments:
MERCURY METEOR, FAIRLANE, FALCON, 64 1/2 MUSTANG
167

Make
Liter
CID
Vin
Model
Year
FORD
8 Cylinders
4.4
FORD
272
FORD
Cyl Bore:
3.625" (92.075 MM)
Thrust Width:
1.125 @ #3
Cyl Bore:
3.563" (90.5 MM)
Thrust Width:
1.1260 @ #3
4.6
279
52-55
4.6
281
W, 9
CROWN VICTOR
Stroke: 3.5433" (90.000 MM)

Cyl Bore:
2.0861-2.0867" (52.988-53.003 MM)
Rods:
2.6567-2.6577" (67.481-67.505 MM)
Main:
Main:
Comments:
SOHC,MPI,16 VLV,COMPRESSED NAT'L GAS, ROMEO BUILT
FORD
4.6
281
Stroke: 3.5433" (90.000 MM)

2.0859-2.0867" (52.983-53.003 MM)
Rods:
2.6567-2.6577" (57.481-57.505 MM)
Main:
Main:
Comments:
DOHC, COBRA, SUPERCHARGED 390 HP
FORD
4.6
281
4.6
281
97-04
3.5512" (90.200 MM)
MUSTANG
Cyl Bore:
Stroke: 3.543" (90.000 MM)

2.0859-2.0867" (52.983-53.003 MM)
Rods:
2.6567-2.6576" (67.481-67.505 MM)
Main:
Main:
Comments:
SOHC, 3 VALVES PER CHAMBER, MUSTANG
FORD
GAS
Stroke: 3.500" (88.9 MM)

2.2482-2.2490" (57.104-57.125 MM)
Rods:
2.6230-2.6238" (66.624-66.645 MM)
Main:
Main:
2.6225" (66.612 MM)
Rear Seal Diameter:
EAD
Casting Numbers:
Comments:
GAS
FORD
(cont.)
56-66
Stroke: 3.297" (83.744 MM)

2.1880-2.1888" (55.575-55.596 MM)
Rods:
2.4980-2.4988" (63.449-63.47 MM)
Main:
Main:
2.625" (66.675 MM)
Rear Seal Diameter:
B4A-B, B55-A, C1TE, C9TE, EC, ECG, ECK
Casting Numbers:
Comments:
Engine Model
03-05
3.5512-3.5527" (90.200-90.239 MM)
MUSTANG
Cyl Bore:
05-05
3.5512-3.5524" (90.200-90.230 MM)
W, X
91-05
3.5512-3.5527" (90.2-90.239 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
2.0861-2.0868" (52.987-53.005 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
.893-.897 @ #5
Main:
Thrust Width:
Balance: Internal
E65EBB39D, F1AE, F1AE-AD, F1AE-AE, F65E, RFF1AE6303AD
Casting Numbers:
Comments:
SOHC, 90 V8, EFI, MODULAR/ (99W), ROMEO BLT THRUST WASHER GOES-REAR OF #5 CAP.
FORD
Stroke:
Rods:
4.6
281
3.543" (89.992 MM)

2.0859-2.0867" (52.982-53.002 MM)
93-03
Cyl Bore:
Rod Width:
2.6567-2.6576" (67.48-67.503 MM)
Main:
Main:
Thrust Width:
3.623" (92.024 MM)
Rear Seal Diameter:
F1AE-AD-5D, F1AE-AD-7D, F1AE-AD-8D, F1AE-AE
Casting Numbers:
Comments:
DOHC, PFI, 90 V8, MODULAR/ (99W) THRUST BRG LENGTH .890
COUNTERBORE 1.940"X.577"
FORD
4.6
281
3.5512-3.5527" (90.2-90.239 MM)

1.894" (48.108 MM)
.893 @ #5
KEYWAY .186", SNOUT
96-01
3.5512-3.5527" (90.2-90.239 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
2.0861-2.0868" (52.987-53.005 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
.893-.897 @ #5
Main:
Thrust Width:
Balance: Internal
E65EBB39D, F1EA-AE, F65E-BB
Casting Numbers:
Comments:
SOHC, TRITION, WINDSOR MODULAR THRUST WASHER GOES-REAR OF #5 CAP.
168
TRITION

Make
Liter
CID
Vin
Model
Year
FORD
FORD
8 Cylinders
4.7
289
FALCON
Engine Model
(cont.)
64-68
90V
4.000" (101.6 MM)

Stroke: 2.870" (72.898 MM)
Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
1.135-1.140" @ #3
Main:
Thrust Width:
3.623-3.625" (92.024-92.075 MM)
Rear Seal Diameter:
1M, 1MA, 3M, C2OE-A, C2OZ, C2OZ-B, C3AE-F, C3AE-N, C3AF-N, C3OE-B, C3OZ, C3OZ-B
Casting Numbers:
Comments:
FORD
4V SPECIAL 271 HP, FALCON, MUSTANG, MERCURY COMET
4.7
289
Stroke: 2.8700" (72.800 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.6250" (92.075 MM)
Rear Seal Diameter:
Comments:
2V
FORD
4.7
289
4.8
4.000" (101.600 MM)
Thrust Width:
1.135-1.140" @ #3
Cyl Bore:
4.000" (101.600 MM)
Thrust Width:
1.135-1.140" @ #3
Stroke: 2.870" (72.800 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
3.6250" (92.075 MM)
Rear Seal Diameter:
Comments:
2V OR 4V, PREMIUM FUEL
FORD
63-68
Cyl Bore:
90V
66-67
292
90V
55-66
3.7500" (95.250 MM)

Stroke: 3.2970" (83.743 MM)
Cyl Bore:
2.1880-2.1888" (55.575-55.596 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.4980-2.4988" (63.449-63.47 MM)
.125" (3.175 MM)
Main:
Main Fillet:
1.126 OR 1.141
Main:
Thrust Width:
Balance: External
2.625" (66.675 MM)
Rear Seal Diameter:
B4A-6303-B, B5A-6303-B, B5S-6303-A, B5S-6303-B, C1TE, C1TE-6303F1, C1TE-F, C1TE-F1, C9TE-A,
Casting Numbers:
EC, ECG, ECG-6303-B, ECK, ECK-6303-B
Comments:
ALSO USED IN MARINE REVERSE ROTATION
FORD
5.0
302
CSG-850
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
3.6250" (92.075 MM)
Main:
Rear Seal Diameter:
Comments:
IND/MARINE
FORD
5.0
Cyl Bore:
302
Stroke: 3.000" (76.200 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
E7AE, E7TE, F1AZ, F4ZZ
Casting Numbers:
Comments:
SFI, EXPLORER, MOUNTAINEER
FORD
5.0
EXPLORER
Cyl Bore:
302
CSG-850
4.0004-4.0052" (101.61-101.732 MM)
97-00
4.0000-4.0012" (101.600-101.630 MM)
56-65
3.625" (92.075 MM)

Stroke: 3.660" (92.964 MM)
Cyl Bore:
2.2482-2.2490" (57.104-57.125 MM)
Rods:
2.6230-2.6238" (66.624-66.645 MM)
Main:
.125 @ #3
Main:
Thrust Width:
Balance: External
C2TE-6303-C, C3TE-6303-B, C3TE-6303-C, C3TE-6303-D, EBU, EBU-6303-B, ECS, ECT-6303-C, ECU
Casting Numbers:
Comments:
GAS TRUCK NOT 289-302 STYLE ENGINE
FORD
5.0
302
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
2M, 2MA, 2MAB, 2MAC, 2MAD
Casting Numbers:
Comments:
TRUCK
68-69
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
169
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3

Make
Liter
CID
Vin
Model
FORD
FORD
Year
8 Cylinders
5.0
302
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
Casting Numbers:
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Stroke: 3.000" (76.2 MM)

Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
Rod Fillet:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.625-3.625" (92.075-92.075 MM)
Rear Seal Diameter:
C9ZE-6303-A, D0ZE-6303-A
Casting Numbers:
Comments:
BOSS 302 CU" 290 HP SOLID CAM LIFTER CAMSHAFT
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
FORD
5.0
5.0
302
302
FORD
5.0
302
5.0
302
5.0
302
FORD
5.0
302
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000-4.0005" (101.600-101.613 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
74-82
83-87
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
2MAE, E1AE, E1AE-AA, E7AE, E7AE-AA
Casting Numbers:
Comments:
EFI, EXCEPT H.O.
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
2MAE, E1AE, E1AE-AA, E7AE
Casting Numbers:
Comments:
4BC, EFI, CFI, HO, W/ WITHOUT ROLLER
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
EFI, H.O.
FORD
74-81
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
2M, 2MA, 2MAB, 2MAC, 2MAD, 2MAE
Casting Numbers:
Comments:
CAR/TRUCK
FORD
69-71
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
TRUCK
(cont.)
68-73
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
FORD
Engine Model
84-87
84-87
170

Make
Liter
CID
Vin
Model
Year
FORD
8 Cylinders
5.0
FORD
302
FORD
5.0
302
5.0
302
5.0
302
5.0
302
FORD
5.0
302
FORD
5.1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.0000-4.0005" (101.6-101.613 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109" (7/64)
.109" (7/64)
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000-4.005" (101.6-101.727 MM)

.109 (7/64)
.109 (7/64)
1.135 @ #3
Cyl Bore:
4.000" (101.6 MM)
87-93
88-93
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
TBI, OHV, HO, (99T), ROLLER CAM
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
2MAE, E1AE, E7AE
Casting Numbers:
Comments:
SHP, COBRA, GT40
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
EFI, ROLLER CAM
FORD
86-86
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.623-3.625" (92.024-92.075 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
MFI, H.O. SEE TB 1462
FORD
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.135 @ #3, SURFACE FINISH 10-20 RA
MFI, TRUCK
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
2MAE, E1AE-AA
Casting Numbers:
Comments:
EFI, ODD BALL VALVE LENGTH 1986 ONLY
FORD
(cont.)
85-97
Stroke: 3.000" (76.2 MM)

Cyl Bore:
2.1228-2.1236" (53.919-53.939 MM)
Rods:
Rod Fillet:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.624-3.625" (92.05-92.075 MM)
Rear Seal Diameter:
2 MAE, 2MAE, E1AE, E1AE-AA, E7AE, E7AE-AA
Casting Numbers:
Comments:
Engine Model
91-95
95-97
312
Stroke: 3.438" (87.325 MM)

2.1880-2.1888" (55.575-55.596 MM)
Rods:
2.6235-2.6243" (66.637-66.657 MM)
Main:
Main:
2.745" (69.723 MM)
Rear Seal Diameter:
ECE, ECG, ECK, ECZ
Casting Numbers:
Comments:
T-BIRD, 40A, 40B, FAIRLANE, PICKUP
FAIRLANE
56-60
Cyl Bore:
3.798" (96.469 MM)
Thrust Width:
1.1260 @ #3
171

Make
Liter
CID
Vin
Model
Year
FORD
8 Cylinders
5.2
FORD
317
Engine Model
(cont.)
52-55
3.800" (96.52 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.2482-2.2490" (57.104-57.125 MM)
Rods:
2.6230-2.6238" (66.624-66.645 MM)
Main:
1.1260 @ #3
Main:
Thrust Width:
B5Q-6303-A, EAB, EAB-6303, EAD, EAD-6303-C, EAM, EBJ, ECT, EDM
Casting Numbers:
Comments:
FORD
TRUCK
5.4
330
Stroke: 4.165" (105.800 MM)

2.0859-2.0867" (52.983-53.003 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
Main:
Comments:
SOHC, 3 VALVES PER CHAMBER, F150 PICKUP
FORD
5.4
330
F150
F150
Stroke: 4.1653" (105.800 MM)

Cyl Bore:
2.0859-2.0867" (52.983-53.003 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
Main:
Comments:
SOHC, SFI, SUPERCHARGED, F150 2WD LIGHTNING
FORD
5.4
330
Stroke: 4.165" (105.800 MM)

2.0859-2.0867" (52.983-53.003 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
Main:
Comments:
DOHC, SFI, LINCOLN NAVIGATOR
FORD
5.4
99-02
3.5512-3.5524" (90.200-90.230 MM)
NAVIGATOR
Cyl Bore:
330
04-06
3.5512-3.5524" (90.200-90.230 MM)
Cyl Bore:
01-03
3.5511-3.5524" (90.200-90.230 MM)
NAVIGATOR
98-05
3.5512-3.5524" (90.2-90.231 MM) *

Stroke: 4.165" (105.791 MM)
Cyl Bore:
2.0861-2.0868" (52.987-53.005 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
.893-.897 @ #5
Main:
Thrust Width:
Balance: Internal
3.623" (92.024 MM)
Rear Seal Diameter:
Comments:
SOHC, EFI, 90 V8, MODULAR, + F-350 THRUST WASHER GOES-REAR OF #5 CAP.
* 3 STD. BORE PISTONS, ONE EVERY .0004"
FORD
5.4
330
Stroke: 4.170" (105.800 MM)

2.0859-2.0867" (52.981-53.002 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
Main:
Balance: Internal
3.623" (92.024 MM)
Rear Seal Diameter:
Comments:
DOHC, SFI, LINCOLN NAVIGATOR
FORD
5.4
NAVIGATOR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
330
LD
99-01
3.5512-3.5527" (90.200-90.239 MM)

ROLLED
ROLLED
.900" @ #5
62-65
FE
3.875" (98.425 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
1.1240 @ #3
Main:
Thrust Width:
Balance: Internal
2T, 2TA, C0AE-A, C0AE-B, C1AE-G, C2OE, C3AE, C3TE-C, C3TE-D, C4AE-A, C4TE-6303-A, C4TE-A,
Casting Numbers:
CSAE-A, EDD
Comments:
LIGHT DUTY TRUCK
FORD
5.4
330
HD
66-76
3.875" (98.425 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
1.122 @ #3
Main:
Thrust Width:
Balance: External
2T, 2TA, C0AE-B, C3AE-A, C4AE-A, C4TE-A, C5AE-A, C6AE-D, C6TE-A, C6TE-D, C7TE-A, D0TE-A,
Casting Numbers:
D2TE-A, D2TE-AA, EDD
Comments:
HD, TRUCK STEEL, 1.750 SNOUT
172
FE

Make
Liter
CID
Vin
Model
FORD
FORD
Year
Engine Model
8 Cylinders
5.4
332
(cont.)
58-59
3.800" (96.52 MM)

Stroke: 3.660" (92.964 MM)
Cyl Bore:
2.2482-2.2490" (57.104-57.125 MM)
Rods:
2.6230-2.6238" (66.624-66.645 MM)
Main:
1.126 @ #3
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
5750174, C2TE-6303C, C3TE-6303B, C3TE-6303C, C3TE-6303D, EBU-6303-B, ECS, ECT, ECT-6303-C,
Casting Numbers:
ECU, ECU-6303, ECU-6303-B
GAS, AGRI/TRUCK, NOT FE STYLE ENGINE
Comments:
FORD
5.4
332
CAR
Stroke: 3.300" (83.82 MM)

2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
2.871" (72.923 MM)
Rear Seal Diameter:
5752421, C3AE-A, EDC
Casting Numbers:
Comments:
GAS, CAR
FORD
5.5
337
58-59
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.1260 @ #3
48-52
Stroke: 4.3750" (111.125 MM)

Cyl Bore:
2.3995-2.4000" (60.947-60.96 MM)
Rods:
1&2 2.8735-2.8740" (72.987-73. MM)
Main 1:
3 2.8730-2.8735" (72.974-72.987 MM)
Main:
Main 2:
Thrust Width:
8EL-6302-A, 8EQ-6303
Casting Numbers:
Comments:
F7 & F8 TRUCKS & 1949-51LINCOLN 336.7 CUBIC INCH
FORD
5.6
FE
341
3.5000" (88.9 MM)
1948-51 THRUST @ REAR, 1952 THRUST @
55
3.9375" (100.013 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.2482-2.2490" (57.104-57.125 MM)
Rods:
2.6230-2.6238" (66.624-66.645 MM)
Main:
1.1260 @ #3
Main:
Thrust Width:
B5Q-6303-A, EAB, EAB-6303, EAD, EAD-6303-C, EAM, EBJ, ECT, EDM
Casting Numbers:
Comments:
LINCOLN
FORD
5.8
351
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
7M, 7MA, E4AE-BA
Casting Numbers:
Comments:
PFI, WINDSOR, F150 TRUCK, LIGHTNING
FORD
5.8
351
5.8
351
FORD
5.8
351
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
3C, 3M, 3MA, 7M, 7MA, C9OE-A
Casting Numbers:
Comments:
WINDSOR
90V
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.0000-4.0085" (101.600-101.816 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.138" @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.138 @ #3
68-74
Stroke: 3.500" (88.900 MM0

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.750" (95.250 MM)
Rear Seal Diameter:
C90E-A
Casting Numbers:
Comments:
WINDSOR
93-96
4.000" (101.6 MM)
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
3C, 3M, 3MA, 7M, 7MA, C9OE-A
Casting Numbers:
Comments:
WINDSOR
FORD
F150
Cyl Bore:
69-71
69-78
173
90V
90

Make
Liter
CID
Vin
Model
Year
FORD
8 Cylinders
5.8
FORD
351
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
Balance: External
3.7500" (95.25 MM)
Rear Seal Diameter:
4M, 4MA, 4MAB, DOAE-A
Casting Numbers:
Comments:
FORD
5.8
351
5.8
351
5.8
351
5.8
351
5.8
351
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.7500" (95.25 MM)
Rear Seal Diameter:
3M, 3MA, 7M, 7MA, E4AE-BA, WGS
Casting Numbers:
Comments:
WINDSOR
FORD
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.094"
.094"
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.0000-4.0048" (101.6-101.722 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.135 @ #3
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.135 @ #3
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.135 @ #3
5.8
75-82
80-82
90V
83-91
84-97
351
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
3.750" (95.25 MM)
Main:
Rear Seal Diameter:
3C, 3M, 3MA, 7M, 7MA, C90E-A
Casting Numbers:
Comments:
IND/ MARINE
79
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
3.7500" (95.25 MM)
Rear Seal Diameter:
3M, 3MA, 7M, 7MA, WGS
Casting Numbers:
Comments:
WINDSOR, H.O.
FORD
355
4.000" (101.6 MM)

.094"
.094"
1.1240 @ #3
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
3.750" (95.25 MM)
Rear Seal Diameter:
3C, 3M, 3MA, 7M, 7MA
Casting Numbers:
Comments:
WINDSOR, H.O.
FORD
70-74
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
G,Q
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
3C, 3M, 3MA, 7M, 7MA, C90E-A
Casting Numbers:
Comments:
WINDSOR
FORD
(cont.)
CLEVELAND, 2V, 4V
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
3.750" (95.25 MM)
Rear Seal Diameter:
1K, 1KA, D7AE, SM
Casting Numbers:
Comments:
351-M, MODIFIED, CAR & TRUCK
FORD
Engine Model
WSG-858
Cyl Bore:
174
WSG-858 90V
4.0000-4.0048" (101.6-101.722 MM)

Make
Liter
CID
Vin
Model
Year
FORD
8 Cylinders
5.8
FORD
352
(cont.)
58-67
Stroke: 3.500" (88.9 MM)

2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
2.871" (72.923 MM)
Rear Seal Diameter:
2T, 2TA, A, C0AE-B, C3AE, C4AE, C5AE, EDD
Casting Numbers:
Comments:
Engine Model
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.122 @ #3
FE
390 STYLE ENGINE, SMALLER BORE AND SHORTER STROKE
FORD
5.9
360
68-78
Stroke: 3.500" (88.9 MM)

Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
2T, 2TA, C0AE-B, C3AE-A, C4AE-A, C5AE-A, C8AE-A, EDD
Casting Numbers:
Comments:
L/D GAS TRUCK 390 BORE WITH 352 STROKE
FORD
5.9
361
FE
4.0500-4.0536" (102.87-102.961 MM)
1.1240 @ #3
HD
66-78
FE
4.0500-4.0536" (102.87-102.961 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
3/32 (.094)
Rods:
Rod Fillet:
2.7484-2.7492" (69.809-69.83 MM)
3/32 (.094)
Main:
Main Fillet:
1.125 @ #3
Main:
Thrust Width:
Balance: External
2.871" (72.923 MM)
Rear Seal Diameter:
C4TE-A, C4TE-D, C6TE-D, C7TE-A, D0TE-A, D1TE-A, D2TE-AA, DOTE-A
Casting Numbers:
Comments:
H/D GAS TRUCK 390 BORE WITH 352 STROKE
FORD
5.9
361
RANGER
Stroke: 3.500" (88.900 MM)

2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.830 MM)
Main:
Main:
Balance: External
2.871" (72.923 MM)
Rear Seal Diameter:
Comments:
RANGER, PACER E400 390 BORE WITH 352 STROKE
FORD
Stroke:
Rods:
6.0
365
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.134" (105.000 MM)

2.7164" (68.996 MM) *
TRUCK
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
58-58
FE
4.0500-4.0536" (102.870-102.961 MM)

.094" (3/32)
.094" (3/32)
1.125" @ #3
02-05
VT-365
3.7401-3.7402" (94.999-95.001 MM)

ROLLED *
2.1920" (55.676 MM) *
ROLLED *
1.1210" (28.473 MM) *
3.1885-3.1895" (80.987-81.013 MM)

Main:
Main:
Balance: Internal
2.1455" (54.495 MM) *
4.6450" (117.983 MM) *
Rear Seal Diameter:
Comments:
TURBO DIESEL, F350 TRUCK, 4WD SUPER DUTY REPORTED MEMBER #2092 01-14-05 MC
FORD
6.0
368
56-57
Stroke: 3.656" (92.862 MM)

Cyl Bore:
2.2482-2.2490" (57.104-57.125 MM)
Rods:
2.6230-2.6238" (66.624-66.645 MM)
Main:
Main:
Thrust Width:
EBU, ECT, ECU
Casting Numbers:
Comments:
LINCOLN, MERCURY TURNPIKE CRUISER, POLICE INTER
FORD
6.1
370
4.000" (101.6 MM)
1.1260 @ #3
79-93
4.047" (102.794 MM)

Stroke: 3.590" (91.186 MM)
Cyl Bore:
2.4992-2.5000" (63.48-63.5 MM)
.094 (3/32)
Rods:
Rod Fillet:
2.9994-3.0002" (76.185-76.205 MM)
.094 (3/32)
Main:
Main Fillet:
1.124-1.126 @#3
Main:
Thrust Width:
3.1415" (79.794 MM)
Rear Seal Diameter:
1V, 1VA, 1VAB
Casting Numbers:
Comments:
GAS TRUCK * .0026" HIGH LIMIT ON MAINS ** .0028" HIGH LIMIT ON RODS
THE DESIRED OIL
CLEARANCE IS .0008-.0015" ON BOTH THE MAINS AND RODS.
175
385

Make
Liter
CID
Vin
Model
FORD
8 Cylinders
6.1
FORD
370
Stroke: 3.590" (91.186 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
1V, 1VA, 1VAB
Casting Numbers:
Comments:
FORD
Engine Model
(cont.)
79-94
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.047" (102.794 MM)

.094 (3/32)
.094 (3/32)
1.124-1.126 @#3
Cyl Bore:
4.300" (109.22 MM)
Thrust Width:
1.1320 @ #3
385
LPG TRUCK
6.3
383
57-61
Stroke: 3.300" (83.82 MM)

2.5992-2.6000" (66.02-66.04 MM)
Rods:
2.8994-2.9002" (73.645-73.665 MM)
Main:
Main:
3.026" (76.860 MM)
Rear Seal Diameter:
C1VE, C1VE-A, EDF
Casting Numbers:
Comments:
430 LINCOLN STYLE ENGINE, 4.300" CYL BORE
FORD
Year
6.4
390
61-76
MEL
FE
4.0500" (102.87 MM)

Stroke: 3.7800" (96.012 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
1.1240 @ #3
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
2U, 2UA, 3U, C1AE, C1AE-A, C1AE-G, C2AE-B, C2AE-D, C3AE, C3AE-6303-E, C3AE-B, C3AE-C,
Casting Numbers:
C3AE-D, C3AE-E, C3AE-U, C3AZ, C4AE-3U, C4AE-B, C4AE-C, C4AE-D, C4AE-E, C4AZ-A, C4AZ-J,
C4TZ-A, C4TZ-B, C6AE-A, C6AE-B, C6AE-D
FORD
6.4
390
68-76
FE
4.0500" (102.87 MM)

Stroke: 3.780" (96.012 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
1.1240 @ #3
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
2U, 2UA, 3U, C1AE, C1AE-A, C1AE-G, C2AE-B, C2AE-D, C2OE, C3AE, C3AE-6303-E, C3AE-B, C3AE-C,
Casting Numbers:
C3AE-D, C3AE-E, C3AE-U, C3AZ, C4AE-3U, C4AE-B, C4AE-C, C4AE-D, C4AE-E, C4AZ-A, C4AZ-J,
C4TZ-A, C4TZ-B, C6AE-A, C6AE-B, C6AE-D
Comments:
TRUCK
FORD
6.4
391
HD
64-79
FE
4.0500-4.0536" (102.87-102.961 MM)

Stroke: 3.790" (96.266 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
1.124 @ #3, RMS 20 FRONT, RMS 10 REA
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
C4TE-B, C6TE-C, C6TE-E, C7TE, C7TE-B, C7TE-E, C7TE-EA, D1TE-B, D2TE-EA, D3TE-AA
Casting Numbers:
Comments:
H/D GAS TRUCK
FORD
6.6
400
Stroke: 4.000" (101.6 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
5M, 5MA, 5MAB
Casting Numbers:
Comments:
CAR, TRUCK, SAME AS 351 M, BUT 4.00" STROKE
FORD
6.6
400
71-79
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.094"
.094"
1.136 @ #3
Cyl Bore:
4.0000-4.0048" (101.6-101.722 MM)
Thrust Width:
1.136 @ #3
Stroke: 4.000" (101.6 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
5M, 5MA, 5MAB
Casting Numbers:
Comments:
CAR, TRUCK, SAME AS 351 M, BUT 4.00" STROKE
79-82
176

Make
Liter
CID
Vin
Model
Year
FORD
8 Cylinders
6.6
FORD
401
HD
Stroke: 3.750" (95.25 MM)

2.7092-2.7110" (68.814-68.859 MM)
Rods:
#1 3.1246-3.1254" (79.365-79.385 MM)
Main:
Main:
3.260" (82.804 MM)
Rear Seal Diameter:
C1TE-B, C2TE-B, EDL
Casting Numbers:
Comments:
FORD
(cont.)
58-76
Cyl Bore:
4.130" (104.902 MM)
Thrust Width:
1.1390 @ #3
H/D GAS TRUCK
6.7
406
62-63
Stroke: 3.7900" (96.266 MM)

Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
Thrust Width:
2.8725" (72.962 MM)
Rear Seal Diameter:
C1AE-A, C2AE-D, C3AE-B, C3AE-C, C3AE-E, C4AE-B, C4AE-E
Casting Numbers:
Comments:
4V 6V SPECIAL HIGH PERFORMANCE VIN G 6V
FORD
Engine Model
6.7
410
FE
4.1300" (104.902 MM)
1.1240 @ #3
58
58-58
MEL
4.200" (106.68 MM)

Stroke: 3.700" (93.98 MM)
Cyl Bore:
2.5992-2.6000" (66.02-66.04 MM)
Rods:
#1 2.8994-2.9002" (73.645-73.665 MM)
Main:
1.124 @ #3
Main:
Thrust Width:
2.8275" (71.819 MM)
Rear Seal Diameter:
C2VE, C2VE-A, C3VE, C3VE-A, C9ZE-C, C9ZE-D, EDG, EDG-6303, EDJ, EDS
Casting Numbers:
Comments:
430 LINCOLN STYLE ENGINE, 4.200" CYL BORE
FORD
6.7
410
66-67
Stroke: 3.980" (101.092 MM)

Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM)
Rods:
#1 2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
1U, 1UA, 1UB, 1UVA, 1VA
Casting Numbers:
Comments:
390 BORE WITH 428 STROKE * EXTERNAL ON FLYWHEEL END ONLY
FORD
6.9
420
7.0
427
1.1240 @#3
83-88
Stroke: 4.181" (106.197 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
3.1228-3.1236" (79.319-79.339 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.748-3.752" (95.199-95.301 MM)
Rear Seal Diameter:
1802224C92, 1802224C93, 1803420C1, 1805420, 1805420C1
Casting Numbers:
Comments:
V8 NAVISTAR DIESEL, P/U TRUCKS
FORD
FE
4.050" (102.87 MM)
R, W
4.000" (101.6 MM)

.120" (3.048 MM)
.121-.127
1.133-1.136 @#3
FE
63-68
FE
4.2328-4.2346" (107.513-107.559 MM)

Stroke: 3.780" (96.012 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM) **
Rods:
#1 2.7484-2.7492" (69.809-69.83 MM)
Main:
1.122 @ #3 *
Main:
Thrust Width:
2.871" (72.923 MM)
Rear Seal Diameter:
C3AE-G, C3AE-U, C4AE-AJ, C4AE-B, C4AE-H, C5AE-C, C8AE-A, C8AE-B
Casting Numbers:
Comments:
4V 410 HP, 8V 425 HP SPECIAL, 1968 4V 390 HP * THRUST BRG LENGTH STD=1.119" (28.422 MM) ** SOME
CRANKS WERE GROUND TO USE 392/400/440 CHRYSLER ROD SIZES 2.374-2.375".
FORD
7.0
427
FE MARINE
63-68
FE MARINE
4.2328-4.2346" (107.513-107.559 MM)

Stroke: 3.780" (96.012 MM)
Cyl Bore:
2.4380-2.4388" (61.925-61.946 MM) **
Rods:
#1 2.7484-2.7492" (69.809-69.83 MM)
Main:
1.122 @ #3
Main:
Thrust Width:
***
2.871" (72.923 MM)
Rear Seal Diameter:
C5JE-A, C5JE-B, C6JE-B, C6JE-C, C6JE-D
Casting Numbers:
Comments:
MARINE LOW COMPRESSION STD & REVERSE ROTATIONS ** SOME CRANKS WERE GROUND TO USE
392 CHRYSLER ROD SIZES 2.374-2.375". *** TIMING COVER USE CHICAGO RAWHIDE PART # 18546.
REPORTED MEMBER # 36497 03-17-05 MC
177

Make
Liter
CID
Vin
Model
Year
FORD
FORD
8 Cylinders
7.0
427
SOHC
Stroke: 3.7840" (96.11 MM)

2.4384" (61.935 MM)
Rods:
2.7488" (69.819 MM)
Main:
Main:
2.871" (72.923 MM)
Rear Seal Diameter:
C5AE-C
Casting Numbers:
Comments:
FORD
7.0
Thrust Width:
1.1220 @ #3
428
FE
7.0
7.0
429
4.130" (104.902 MM)
Thrust Width:
1.136 @ #3
BOSS
7.0
429
7.0
429
1.124-1.126"
68-73
7.0
429
FORD
7.0
430
385
4.360" (110.744 MM)
1.1240 @ #3
79-90
385
Cyl Bore:
4.360" (110.744 MM)
Thrust Width:
1.1240 @ #3
Cyl Bore:
4.360" (110.744 MM)
Thrust Width:
1.1240 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.3600-4.3636" (110.744-110.835 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124-1.126@ #3
89-96
Stroke: 3.590" (91.186 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
D9TE-AA, D9TE-BA, D9TE-EA, F3TE-BA
Casting Numbers:
Comments:
MPFI, H/D TRUCK
385
Thrust Width:
Stroke: 3.590" (91.186 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
3.1415" (79.794 MM)
Rear Seal Diameter:
D9TE-AA, D9TE-BA, D9TE-EA
Casting Numbers:
Comments:
H/D LPG TRUCK SNOUT 1.750
FORD
69-70
FE
4.3600-4.3632" (110.744-110.825 MM)
Stroke: 3.590" (91.186 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
#1 2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
3.1415" (79.794 MM)
Rear Seal Diameter:
D9TE-AA, D9TE-B, D9TE-BA
Casting Numbers:
Comments:
H/D GAS TRUCK, 2V OR 4V
FORD
FE
Cyl Bore:
Stroke: 3.590" (91.186 MM)

Cyl Bore:
2.4992-2.5000" (63.48-63.5 MM)
Rods:
#1 2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Thrust Width:
3.1415" (79.794 MM)
Rear Seal Diameter:
4U, 4UA, 4UAB, C8SE-A, C9AE-A, C9AE-B, H, HU
Casting Numbers:
Comments:
BASE ENG 2V,4V POLICE & CJ, SCJ 4 BOLT MAIN
FORD
66-70
Cyl Bore:
429
Stroke: 3.590" (91.186 MM)

2.4992-2.5000" (63.480-63.500 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Comments:
429 BOSS, VINS S, T & Z
FORD
64-67
4.2346" (107.558 MM)
(cont.)
8V SOHC SPECIAL HIGH PERFORMANCE SAE 1046 STEEL
Stroke: 3.980" (101.092 MM)

2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.7484-2.7492" (69.809-69.83 MM)
Main:
Main:
Balance: External
2.871" (72.923 MM)
Rear Seal Diameter:
1U, 1UA, 1UB
Casting Numbers:
Comments:
H/P, POLICE, PASSENGER, TRUCK
FORD
SOHC427
Cyl Bore:
Engine Model
91-95
EDSEL
Stroke: 3.700" (93.98 MM)

Cyl Bore:
2.5992-2.6000" (66.02-66.04 MM)
Rods:
#1 2.8994-2.9002" (73.645-73.665 MM)
Main:
Main:
Thrust Width:
3.026" (76.860 MM)
Rear Seal Diameter:
B9ME-D, C2VE, C3VE, EDG, EDJ
Casting Numbers:
Comments:
EDSEL, LINCOLN, T-BIRD VIN J 6V, 4.300" CYL BORE
178
58-65
4.300" (109.22 MM)
1.124 @ #3
385
385
MEL

Make
Liter
CID
Vin
Model
Year
FORD
FORD
8 Cylinders
7.3
444
FORD
4.1095-4.1115" (104.381-104.432 MM) *

.120" (1/8)
.121-.127 (1/8)
1.133-1.136 @#3
DIESEL TRUCK * 5 STD PISTONS AVAILABLE
7.3
444
Stroke: 4.1811" (106.2 MM)

2.4980-2.4990" (63.449-63.475 MM)
Rods:
#1 3.1228-3.1236" (79.319-79.339 MM)
Main:
Main:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
1802224C92, 1802224C93, 1805420C1
Casting Numbers:
Comments:
IDI TURBO DIESEL * 5 STD PISTONS AVAILABLE
FORD
(cont.)
88-94
Stroke: 4.1811" (106.2 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
#1 3.1228-3.1236" (79.319-79.339 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
1802224C92, 1802224C93, 1805420, 1805420C1
Casting Numbers:
Comments:
Engine Model
7.3
444
94-95
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.1095-4.1115" (104.381-104.432 MM) *

.120 (1/8)
.121-.127 (1/8)
1.133-1.136 @#3
95-05
T444E NAVISTA
4.1096-4.1103" (104.384-104.402 MM)

Stroke: 4.181" (106.197 MM)
Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
.145" (3.683 MM)
Rods:
Rod Fillet:
3.1228-3.1236" (79.319-79.339 MM)
.130 *
Main:
Main Fillet:
1.240-1.244 @#5
Main:
Thrust Width:
4.372-4.376" (111.049-111.15 MM)
Rear Seal Diameter:
1812320C91, 1818200C3
Casting Numbers:
Comments:
DI TURBO, NAVISTAR T444E, DIESEL, POWER STROKE * #5 RADIUS/FILLET: .157-.163
FORD
7.5
460
LSG875
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
#1 MAIN BEARING OIL CLEARANCE .0004-.002"
Main:
Main 2:
STD MAIN USE THICKER UPPER BEARING SHEL
Main 3:
#1 MAIN @ HIGH LIMIT HELPS
Main 4:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
1D, 3Y, 3YA, 3YAB
Casting Numbers:
Comments:
INDUSTRIAL, GAS
LSG875
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124-1.126 @ #3
Stroke: 3.850" (97.79 MM)

Cyl Bore:
2.4992-2.5000" (63.48-63.5 MM)
Rods:
Rod Fillet:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main Fillet:
Main:
Main 2:
Thrust Width:
Main 3:
Main 4:
3.1415" (79.794 MM)
Rear Seal Diameter:
2Y, 2Y68-76, 2YA, 2YAB, 2YABC, C8VE, C8VE-A
Casting Numbers:
Comments:
CAR
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124 @ #3
FORD
FORD
7.5
7.5
460
460
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main:
Main 2:
Main 3:
Main 4:
3.1415" (79.794 MM)
Rear Seal Diameter:
2Y, 2YA, 2YAB, 2YABC, 2YAC
Casting Numbers:
Comments:
CAR, HIGH/ PERFORMANCE
68-73
74-77
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
179
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124 @ #3
385
385

Make
Liter
CID
Vin
Model
FORD
8 Cylinders
7.5
FORD
460
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main 2:
Main 3:
Main 4:
3.1415" (79.794 MM)
Rear Seal Diameter:
2Y, 2YA, 2YAB, 2YABC, C8VE
Casting Numbers:
Comments:
FORD
7.5
460
7.5
460
7.5
460
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.360" (110.744 MM)

.094" (2.388 MM)
.094
1.124 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124 @ #3
7.5
460
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124 @ #3
7.5
460
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
1D, 3Y, 3YA, 3YAB
Casting Numbers:
Comments:
PERFORMANCE ENGINE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.360" (110.744 MM)

.094 (3/32)
.094 (3/32)
1.124 @ #3
74-79
75-76
78
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
1D, 3Y, 3YA, 3YAB
Casting Numbers:
Comments:
TRUCK
FORD
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main:
Main 2:
Main 3:
Main 4:
3.1415" (79.794 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
CAR
FORD
4.360" (110.744 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.124 @ #3
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main:
Main 2:
Main 3:
Main 4:
3.1415" (79.794 MM)
Rear Seal Diameter:
Casting Numbers:
Comments:
CAR
FORD
74-78
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
385
LINCOLN, 4V
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
2Y, 2YA, 2YAB, 2YABC, C8VE
Casting Numbers:
Comments:
TRUCK
FORD
Year
79-87
SVO
87-97
180
385
385
385
385
385

Make
Liter
CID
Vin
Model
FORD
8 Cylinders
7.5
FORD
460
Stroke: 3.850" (97.79 MM)

2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main 1:
Main 2:
Main 3:
Main 4:
Balance: External
3.1415" (79.794 MM)
Rear Seal Diameter:
1D, 3Y, 3YA, 3YAB
Casting Numbers:
Comments:
FORD
4.360" (110.744 MM)

.094 (3/32)
.094 (3/32)
1.124 @ #3
7.6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.380" (111.252 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.1250 @ #3
462
66-68
7.8
475
73-79
7.8
477
8.8
1.2830 @ #3
78-81
534
4.500" (114.3 MM)
1.283 @ #3
58-81
Stroke: 4.200" (106.68 MM)

Cyl Bore:
2.7092-2.7100" (68.814-68.834 MM)
Rods:
#1 3.1246-3.1254" (79.365-79.385 MM)
Main:
Main:
Thrust Width:
3.2585" (82.766 MM)
Rear Seal Diameter:
C1TE-6303-C, C1TE-C, C2TE-B, EDN, EDN-6303-A
Casting Numbers:
Comments:
H/D GAS TRUCK
FORD
FORD
4.500" (114.3 MM)
GAS
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.7092-2.7100" (68.814-68.834 MM)
Rods:
3.1246-3.1254" (79.365-79.385 MM)
Main:
Main:
Thrust Width:
3.260" (82.804 MM)
Rear Seal Diameter:
C1TE-6303-B, C1TE-B, C2TE-6303A, C2TE-A, EDL, EDL-6303-A
Casting Numbers:
Comments:
HD TRUCK, SAME AS 475 V8
FORD
(cont.)
87-98
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.7092-2.7100" (68.814-68.834 MM)
Rods:
#1 3.1246-3.1254" (79.365-79.385 MM)
Main:
Main:
Thrust Width:
3.260" (82.804 MM)
Rear Seal Diameter:
C1TE-6303-B, C1TE-B, C2TE-6303A, C2TE-A, EDL, EDL-6303-A
Casting Numbers:
Comments:
HD GAS TRUCK
FORD
Engine Model
4.500" (114.3 MM)
1.2790-1.2810
10 Cylinders
6.8
413
97-05
3.5512-3.5527" (90.2-90.239 MM)

Stroke: 4.165" (105.791 MM)
Cyl Bore:
2.0861-2.0868" (52.987-53.005 MM)
Rods:
2.6568-2.6576" (67.483-67.503 MM)
Main:
.893-.897 @ #5
Main:
Thrust Width:
Balance: Internal
SOHC, EFI, 90 V10, MODULAR THRUST WASHER GOES-REAR OF #5 CAP.
Comments:
FORD
FORD
385
MFI, TRUCK
Stroke: 3.830" (97.282 MM)

2.5992-2.6000" (66.02-66.04 MM)
Rods:
2.8994-2.9002" (73.645-73.665 MM)
Main:
Main:
3.026" (76.860 MM)
Rear Seal Diameter:
1Y, C6VE-6303-A
Casting Numbers:
Comments:
LINCOLN
FORD
Year
12 Cylinders
4.4
267
Stroke: 3.7500" (95.250 MM)

2.1250-2.1255" (53.975-53.988 MM)
Rods:
2.4060-2.4065" (61.112-61.125 MM)
Main:
Main:
267.3 CU INCH, LINCOLN ZEPHYR V12
Comments:
36-39
Cyl Bore:
181
2.7500" (69.850 MM)
MEL

Make
Liter
CID
Vin
Model
Year
FORD
Engine Model
12 Cylinders
4.8
FORD
292
(cont.)
40-48
2.8750" (73.025 MM)

Stroke: 3.7500" (95.250 MM)
Cyl Bore:
2.1250-2.1255" (53.975-53.988 MM) *
Rods:
2.4000-2.4005" (60.960-60.973 MM)
Main:
THRUST @ REAR
Main:
Thrust Width:
75 VEE BLOCK, LINCOLN ZEPHYR V12, CONTINENTAL * ROD DIMENSIONS LISTED ABOVE FOR ZEPHYR
Comments:
FROM 1936-42. ALL ENGINES FROM 1946-48 HAVE ROD JOURNAL DIAM OF 2.2500" (57.150 MM).
6.8
FORD
414
35-40
Stroke: 4.500" (114.300 MM)

2.4995-2.5005" (63.487-63.513 MM)
Rods:
2.6250" (66.675 MM)
Main:
Main:
Comments:
SERIES K, LINCOLN
Cyl Bore:
3.1250" (79.375 MM)
Thrust Width:
@ REAR BRG
GM
3 Cylinders
1.0
GM
Stroke:
Rods:
61
3.030" (76.962 MM)

1.6529-1.6535" (41.984-41.999 MM)
Comments:
FIREFLY
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
1.7710-1.7716*" (44.983-44.999 MM)

Main:
Main:
Balance: Internal
1.257-1.258" (31.928-31.953 MM)
2.6775-1.6770" (68.009-42.596 MM)
Rear Seal Diameter:
81-K, 91K, K-101
Casting Numbers:
1.0
GM
61
1.0
GM
61
SPRINT
85
Cyl Bore:
2.9134-2.9142" (74.-74.021 MM)
Thrust Width:
.955-.956 @ #4
Stroke: 3.031" (76.987 MM)

1.6531-1.6535" (41.989-41.999 MM)
Rods:
1.7712-1.7716" (44.988-44.999 MM)
Main:
Main:
1.2600" (32.004 MM)
2.6770" (67.996 MM)
Rear Seal Diameter:
81-K, 91K, K-101
Casting Numbers:
Comments:
SUZUKI, MECH LIFTER, 2BBL, SPRINT
SPRINT
86-88
Cyl Bore:
2.9134-2.9142" (74.-74.021 MM)
Thrust Width:
.955-.956 @ #2
GM
LP2
LP2
LP2
4 Cylinders
1.3
GM
79
Stroke: 3.031" (76.987 MM)

1.6430-1.6437" (41.732-41.75 MM)
Rods:
1.7710-1.7716" (44.983-44.999 MM)
Main:
Main:
3B
Casting Numbers:
Comments:
89-00
2.9134-2.9142" (74.-74.021 MM)

.062" ROLLED (1.575 MM)
1.872-1.873" (47.549-47.574 MM)
.062" ROLLED (1.575 MM)
.955-.956 @ #4
SUZUKI, HYD LIFTERS, TBI, OHC, FIREFLY, METRO *1991 MAIN JOURNAL DIAMETER 1.7612-1.7618
THRUST BRG LENGTH STD .099
Stroke: 3.031" (76.987 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
1.7710-1.7716" (44.983-44.999 MM)
Main:
Main:
1.2600" (32.004 MM)
2.6770" (67.996 MM)
Rear Seal Diameter:
Comments:
SUZUKI, MECH LIFTER , 2BBL, SPRINT
GM
SERIES K
METRO
95-96
Cyl Bore:
2.9134-2.9138" (74.-74.011 MM)
Thrust Width:
.955-.956 @ #4
SUZUKI, METRO
1.3
Stroke: 3.031" (76.987 MM)

1.7709-1.7716" (44.982-45.000 MM)
Main:
Main:
Comments:
SOHC, MFI, 16 VALVE, METRO
79
METRO
Cyl Bore:
182
98-00
2.9134-2.9138" (74.000-74.020 MM)
L72

Make
Liter
CID
Vin
Model
Year
GM
4 Cylinders
1.3
GM
Stroke:
Rods:
79
3.030" (76.962 MM)

1.6529-1.6535" (41.984-41.999 MM)
1.7710-1.7716" (44.983-44.999 MM)

Main:
Main:
Balance: Internal
1.257-1.258" (31.928-31.953 MM)
2.6770-2.6775" (67.996-68.009 MM)
Rear Seal Diameter:
K
Casting Numbers:
Comments:
GM
1.3
79
1.4
85
1.5
90
TRACKER
LY8
1.5
92
92-94
2.9134-2.9138" (74.-74.011 MM)
Thrust Width:
.955-.956 @ #4
CHEVETTE
76-77
Cyl Bore:
3.228" (81.991 MM)
Thrust Width:
.9450
SPECTRUM
Stroke: 3.111" (79.019 MM)

Cyl Bore:
1.5726-1.5734" (39.944-39.964 MM)
Rods:
1.8873-1.8881" (47.937-47.958 MM)
Main:
Main:
Thrust Width:
4XCIU, 4XCU
Casting Numbers:
Comments:
EFI, TURBO, SPECTRUM, ISUZU YEAR SPLIT ON CRANK, 8 BLT FLG
GM
98-00
2.9134-2.9142" (74.-74.021 MM)

.062" ROLLED (1.575 MM)
1.872-1.873" (47.549-47.574 MM)
.062" ROLLED (1.575 MM)
.955-.956 @ #4
Cyl Bore:
Stroke: 2.606" (66.192 MM)

1.8094-1.8103" (45.959-45.982 MM)
Rods:
#1 2.0079-2.0084" (51.001-51.013 MM)
Main:
Main:
2.9880" (75.895 MM)
Rear Seal Diameter:
4196N, 9166N
Casting Numbers:
Comments:
1BC, CHEVETTE
GM
(cont.)
METRO THRUST BRG LENGTH STD .099
Stroke: 3.031" (76.987 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
ALL 1.7710-1.7714" (44.983-44.994 MM)
Main:
Main:
Balance: Internal
3B
Casting Numbers:
Comments:
SUZUKI, GEO TRACKER
GM
METRO
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Engine Model
86-88
3.032" (77.013 MM)
@ #2
SPECTRUM
85-87
3.032" (77.013 MM)

Stroke: 3.110" (78.994 MM)
Cyl Bore:
1.5726-1.5734" (39.944-39.964 MM)
Rods:
1.8873-1.8881" (47.937-47.958 MM)
Main:
Main:
4127, 5330, KN10, KN8
Casting Numbers:
Comments:
OHC, ISUZU, SPECTRUM, I-MARK, CARB YEAR SPLIT ON CRANK, 6 BOLT FLG
GM
1.5
92
SPECTRUM
Stroke: 3.111" (79.019 MM)

Cyl Bore:
1.5726-1.5734" (39.944-39.964 MM)
Rods:
1.8873-1.8881" (47.937-47.958 MM)
Main:
Main:
Thrust Width:
4XCIU, 4XCIU, 4XCU, 4XCU, 4XCUT, 4XCUT
Casting Numbers:
Comments:
2BC, ISUZU, SPECTRUM, I-MARK YEAR SPLIT ON CRANK, 8 BLT FLG
GM
1.6
97
Stroke: 3.031" (76.987 MM)

1.5740-1.5748" (39.98-40. MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
1K, 4A
Casting Numbers:
Comments:
SOHC, TOYOTA, 4A-LC, NOVA
GM
1.6
Stroke: 3.031" (76.987 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
1.8891-1.8898" (47.983-48.001 MM)
Main:
Main:
1K
Casting Numbers:
Comments:
DOHC, TOYOTA, PRIZM
@ #2
NOVA
Thrust Width:
85-88
3.189" (81.001 MM)
Cyl Bore:
97
@ CENTER
PRIZM
Cyl Bore:
Thrust Width:
183
87-89
3.032" (77.013 MM)
89-90
3.189" (81.001 MM)
@ #3
4A-LC

Make
Liter
CID
Vin
Model
Year
GM
4 Cylinders
1.6
GM
97
Stroke: 3.031" (76.987 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
1.8891-1.8898" (47.983-48.001 MM)
Main:
Main:
1K
Casting Numbers:
Comments:
PRIZM
(cont.)
89-94
4AFE
3.1890-3.1902" (81.001-81.031 MM)
Cyl Bore:
@ #3
Thrust Width:
DOHC, TOYOTA, PRIZM
GM
1.6
97
Stroke: 3.030" (76.962 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
Comments:
DOHC, TOYOTA, PRIZM
GM
1.6
GM
1.6
97
97
1.6
97
STORM
Thrust Width:
.948 @ #2
STORM
3.1496" (80. MM)
Thrust Width:
.948 @ #2
TRACKER
GM
1.6
97
GM
1.6
97
GM
1.6
98
98
.954 @ #3
95-97
TRACKER
95-99
2.9528-2.9535" (75.001-75.019 MM)
Thrust Width:
.954 @ #3
AVEO
04-05
3.1102" (79.000 MM)
CHEVETTE
Stroke: 2.980" (75.692 MM)

Cyl Bore:
1.8094-1.8103" (45.959-45.982 MM)
Rods:
#1 2.0079-2.0088" (51.001-51.024 MM)
Main:
Main:
Thrust Width:
2.9880" (75.895 MM)
Rear Seal Diameter:
1140, 140N, 7184N
Casting Numbers:
Comments:
CHEVETTE, 1BBL, 4-AC, NOVA MAY HAVE 1.09 OR .825 PILOT HOLE
184
LS5
2.9528-2.9535" (75.000-75.020 MM)
Cyl Bore:
1.6
G16A
Cyl Bore:
Stroke: 3.2090" (81.500 MM)

1.6929" (43.000 MM)
Rods:
2.1654" (55.000 MM)
Main:
Main:
Comments:
AVEO, DOHC
89-96
4XE1
2.9528-2.9535" (75.001-75.019 MM)
TRACKER
Cyl Bore:
Stroke: 3.543" (89.992 MM)

1.7316-1.7323" (43.983-44. MM)
Rods:
2.0465-2.0472" (51.981-51.999 MM)
Main:
Main:
K-N
Casting Numbers:
Comments:
SOHC, 16 V, SUZUKI, TRACKER, RPO L01, MECH
LWO
90-96
Cyl Bore:
4AFE
90-91
3.1496-3.1512" (80.-80.04 MM)
Stroke: 3.543" (89.992 MM)

Cyl Bore:
1.7316-1.7323" (43.983-44. MM)
Rods:
2.0465-2.0472" (51.981-51.999 MM)
Main:
Main:
Thrust Width:
Balance: Internal
2.677" (67.996 MM)
Rear Seal Diameter:
119, KN, K-N, OK, X20
Casting Numbers:
Comments:
SOHC, 8 V, TBI, SUZUKI, TRACKER, ALUM BLK+ HEAD
Stroke: 3.5433" (90.000 MM)

1.7316-1.7323" (43.982-44.000 MM)
Rods:
2.0465-2.0472" (51.982-52.000 MM)
Main:
Main:
Comments:
SOHC, 8 V, LS5, TRACKER
95-97
3.1892-3.1902" (81.001-81.026 MM)
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.5722-1.5728" (39.934-39.949 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Comments:
SOHC, 12 V, ISUZU 4XE1, STORM GS
GM
PRIZM
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.5722-1.5728" (39.934-39.949 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Balance: Internal
Comments:
DOHC, ISUZU, STORM GSI, LWO ENGINE
GM
Engine Model
76-77
3.228" (81.991 MM)
.9450 @ #5
LO1
L91

Make
Liter
CID
Vin
Model
Year
GM
GM
4 Cylinders
1.6
98
Stroke: 2.980" (75.692 MM)

1.8094-1.8103" (45.959-45.982 MM)
Rods:
#1 2.0079-2.0088" (51.001-51.024 MM)
Main:
Main:
2.9880" (75.895 MM)
Rear Seal Diameter:
1140, 140N, 7184N
Casting Numbers:
Comments:
GM
78-79
3.228" (81.991 MM)
Thrust Width:
.9450 @ #5
CHEVETTE, 1BBL MAY HAVE 1.09 OR .825 PILOT HOLE
1.6
98
Stroke: 2.980" (75.692 MM)

1.8094-1.8103" (45.959-45.982 MM)
Rods:
2.0078-2.0084" (50.998-51.013 MM)
Main:
Main:
1140N, 7184N
Casting Numbers:
Comments:
CHEVETTE, 2BBL 1.09 PILOT HOLE
GM
CHEVETTE
Cyl Bore:
1.6
98
CHEVETTE
79-80
Cyl Bore:
3.228" (81.991 MM)
Thrust Width:
.945 @ #5
CHEVETTE
80-82
3.228" (81.991 MM)

Stroke: 2.598" (65.989 MM)
Cyl Bore:
1.8094-1.8104" (45.959-45.984 MM)
Rods:
1-4 2.0078-2.0088" (50.998-51.024 MM)
Main 1:
5 2.0074-2.0084" (50.988-51.013 MM)
.945 @ #5
Main:
Main 2:
Thrust Width:
1140N, 410177, 7184N
Casting Numbers:
Comments:
CHEVETTE, 2BBL 1.09 PILOT HOLE 1976-80, .825 PILOT HOLE 1981-87 * #5 OIL CLR: .0016-.0041
GM
1.6
98
Stroke: 2.980" (75.692 MM)

1.8094-1.8104" (45.959-45.984 MM)
Rods:
2.0078-2.0088" (50.998-51.024 MM)
Main:
Main:
2.9880" (75.895 MM)
Rear Seal Diameter:
1140, 1140N, 140N, 7184N
Casting Numbers:
Comments:
CHEVETTE, 2BBL * OIL CLR #5: .0016-.0042,
GM
1.6
98
1.6
98
1.6
Thrust Width:
.9450 @ #5
LE MANS
3.1063" (78.9 MM)
Thrust Width:
.775 @ #3
LE MANS
91-93
3.110" (78.994 MM)
Cyl Bore:
98
88-90
Cyl Bore:
Stroke: 3.209" (81.509 MM)

1.6918-1.6924" (42.972-42.987 MM)
Rods:
2.1642-2.1648" (54.971-54.986 MM)
Main:
Main:
Comments:
TBI, DAEWOO, LE MANS
GM
82-87
3.228" (81.991 MM)
.825 PILOT HOLE ONLY
Stroke: 3.2087" (81.501 MM)

1.6918-1.6924" (42.972-42.987 MM)
Rods:
2.1642-2.1648" (54.971-54.986 MM)
Main:
Main:
Comments:
TBI, DAEWOO, LE MANS
GM
CHEVETTE
Cyl Bore:
TRACKER
98
Cyl Bore:
2.9586" (75.148 MM)
Cyl Bore:
3.6875" (93.662 MM)
1.7316-1.7322" (43.983-43.998 MM)

Rods:
2.0470-2.0472" (51.994-51.999 MM)
Main:
Main:
Comments:
SOHC, 16 V, TRACKER
GM
1.8
107
28-28
Stroke: 2.5200" (64.008 MM)

1.3750" X 2.4370"
Main 1:
1.6875" X 1.6875"
Main:
Main 2:
1.7500" X 3.000"
Main 3:
Comments:
CHEVROLET, 107.9 CUBIC INCH
GM
1.8
Stroke: 3.370" (85.598 MM)

1.8893-1.8898" (47.988-48.001 MM)
Rods:
1.8891-1.8898" (47.983- 48.000 MM)
Main:
Main:
Comments:
DOHC, TOYOTA, PRIZM
108
PRIZM
Cyl Bore:
185
92-04
3.190" (81.026 MM)
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
Year
GM
GM
4 Cylinders
1.8
108
LV6
Stroke: 3.130" (79.502 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
1.8891-1.8898" (47.983-48.001 MM)
Main:
Main:
DOHC, MPI, PRIZM, TOYOTA
Comments:
GM
1.8
1.8
1.8
110
110
1.8
110
1.8
111
STORM
Thrust Width:
.948 @ #2
VIBE
GM
1.8
Thrust Width:
112
GM
1.8
112
GM
1.8
112
81-86
3.307" (83.998 MM)
@ #3
81-85
Cyl Bore:
3.170" (80.518 MM)
Thrust Width:
.942 @ #4
Cyl Bore:
3.339" (84.811 MM)
Thrust Width:
1.025 @ #3
Cyl Bore:
3.339" (84.811 MM)
Thrust Width:
1.0250 @ #3
Stroke: 3.130" (79.502 MM)

1.9279-1.9286" (48.969-48.986 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
Main:
Balance: Internal
2.990-2.992" (75.946-75.995 MM)
Rear Seal Diameter:
2670, 90156143
Casting Numbers:
Comments:
SOHC, TBI, BRAZILIAN PONTIAC
Stroke: 3.130" (79.502 MM)

1.9279-1.9286" (48.969-48.986 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
Main:
2.990-2.992" (75.946-75.995 MM)
Rear Seal Diameter:
2670, 90156143, 95156143
Casting Numbers:
Comments:
SOHC, TURBO, MPI, BRAZILIAN BUILT PONTIAC
00-05
82-87
84-87
186
2ZZGE
3.2283-3.2289" (82.000-82.013 MM)
CHEVETTE
Cyl Bore:
Stroke: 3.460" (87.884 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.4944-2.4954" (63.358-63.383 MM)
Main:
Main:
2.990-2.992" (75.946-75.995 MM)
Rear Seal Diameter:
8705N
Casting Numbers:
Comments:
OHV, CHEVROLET
G180Z
92-93
3.1496-3.1512" (80.-80.04 MM)
Stroke: 3.228" (81.991 MM)

1.9268" (48.941 MM)
Rods:
2.2010-2.2020" (55.905-55.931 MM)
Main:
Main:
Comments:
DIESEL, CHEVETTE
76-86
Cyl Bore:
G180
3.3071-3.3087" (84.-84.041 MM)
Stroke: 3.3464" (85.000 MM)

Cyl Bore:
1.7713-1.7717" (44.992-45.000 MM)
Rods:
1.8892-1.8898" (47.988-48.000 MM)
Main:
Main:
Comments:
DOHC,MFI,TOYOTA,82MM BORE,85MM STROKE,LARGER ROD
GM
72-75
3.310" (84.074 MM)
LUV
Stroke: 3.543" (89.992 MM)

1.8083-1.8089" (45.931-45.946 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Balance: Internal
Comments:
DOHC, ISUZU, STORM GSI
GM
@ #3
LUV
Cyl Bore:
Stroke: 3.230" (82.042 MM)

Cyl Bore:
1.9262-1.9268" (48.925-48.941 MM)
Rods:
#1 2.2016-2.2022" (55.921-55.936 MM)
Main:
3.2440" (82.398 MM)
Main:
Rear Seal Diameter:
202B, BP, E
Casting Numbers:
Comments:
LUV SERIES 15, ISUZU, OPEL 76-79, I- MARK 1981-84
GM
93-94
Thrust Width:
110
(cont.)
3.340" (84.836 MM)
Cyl Bore:
Stroke: 3.230" (82.042 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
#1 2.2016-2.2022" (55.921-55.936 MM)
Main:
3.2440" (82.398 MM)
Main:
Rear Seal Diameter:
202B, BP, E
Casting Numbers:
Comments:
LUV, ISUZU
GM
PRIZM
Engine Model

Make
Liter
CID
Vin
Model
Year
GM
GM
4 Cylinders
1.9
116
Stroke: 3.543" (89.992 MM)

1.8500-1.8508" (46.99-47.01 MM)
Rods:
2.2438-2.2444" (56.993-57.008 MM)
Main:
Main:
21000883-3, 21008832
Casting Numbers:
Comments:
GM
SATURN
Engine Model
(cont.)
90-02
Cyl Bore:
3.2280-3.2291" (81.991-82.019 MM)
Thrust Width:
.930" @ #3
LLO
DOHC, SATURN, LLO THRUST BRG LENGTH .721" STD, O/S THRUST BRG AVLBL
1.9
116
SATURN
90-94
L24
3.2280-3.2291" (81.991-82.019 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
1.8500-1.8508" (46.99-47.01 MM)
Rods:
2.2438-2.2444" (56.993-57.008 MM)
Main:
.930" @ #3
Main:
Thrust Width:
Balance: Internal
2.992" (75.997 MM)
Rear Seal Diameter:
210008832
Casting Numbers:
Comments:
SOHC, SATURN, L24 THRUST BRG LENGTH .721" STD, O/S THRUST BRG AVLBL
GM
1.9
116
SATURN
93-02
3.2280-3.2291" (81.991-82.019 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
1.8500-1.8508" (46.99-47.01 MM)
Rods:
2.2438-2.2444" (56.993-57.008 MM)
Main:
.930" @ #3
Main:
Thrust Width:
210008832
Casting Numbers:
Comments:
SOHC, SATURN, L24 THRUST BRG LENGTH .721" STD, O/S THRUST BRG AVLBL
GM
1.9
119
Stroke: 3.2283" (81.999 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
ALL 2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
202B
Casting Numbers:
Comments:
SOHC, ISUZU, LUV, S10, S15, 2BBL
GM
2.0
121
2.0
121
2.0
122
2.0
122
1.465 @ #3
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
.947 @ #4
82-86
S-10
82-84
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
.947 @ #4
Cyl Bore:
3.5039" (88.999 MM)
Thrust Width:
1.017
Stroke: 3.150" (80.01 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
1-4 2.4944-2.4954" (63.358-63.383 MM)
Main 1:
5 2.4936-2.4946" (63.337-63.363 MM)
Main:
Main 2:
2.990-2.992" (75.946-75.995 MM)
Rear Seal Diameter:
3278N, 3281N
Casting Numbers:
Comments:
OHV, 2BBL, CHEVROLET * #5: .0014-.0043
GM
Thrust Width:
Stroke: 3.150" (80.01 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
1-4 2.4944-2.4954" (63.358-63.383 MM)
Main 1:
5 2.4936-2.4946" (63.337-63.363 MM)
Main:
Main 2:
14077243, 3278N, 7243N, 7248N
Casting Numbers:
Comments:
SOHC, 2BC, CHEVY S-10 * OIL CLR #5: .0014-.0043
GM
82-85
3.4252" (87. MM)
Stroke: 3.150" (80.01 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
1-4 2.4944-2.4954" (63.358-63.383 MM)
Main 1:
5 2.4936-2.4946" (63.337-63.363 MM)
Main:
Main 2:
14077243, 3278N, 3281N, 7243N, 7248N
Casting Numbers:
Comments:
SOHC, TBI, CHEVROLET
GM
LUV
Cyl Bore:
82-86
87-88
2.990-2.992" (75.946-75.995 MM)

Rear Seal Diameter:
14090003, 90003C
Casting Numbers:
Comments:
OHV, TBI, CHEVROLET, ALUMINUM HEAD
187
L24

Make
Liter
CID
Vin
Model
Year
GM
4 Cylinders
2.0
GM
122
Stroke: 3.160" (80.264 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.4944-2.4954" (63.358-63.383 MM)
Main:
Main:
2.990-2.992" (75.946-75.995 MM)
Rear Seal Diameter:
003K, 003N, 14090003, 90003C
Casting Numbers:
Comments:
GM
Engine Model
(cont.)
87-89
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5036-3.5043" (88.991-89.009 MM)

.063" (1.6 MM)
.063" (1.600 MM)
1.0120 @ #4
OHV, TBI, CHEVROLET
2.0
122
87-90
3.3852-3.3868 (85.984-86.025 MM)

Stroke: 3.386" (86.004 MM)
Cyl Bore:
1.9279-1.9287" (48.969-48.989 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
1.025 @ #3
Main:
Thrust Width:
3.461" (87.909 MM)
Rear Seal Diameter:
902280399, 9028036, 9028039, 90280399, R9028036, R90280395, R90280399
Casting Numbers:
Comments:
SOHC, TBI, TURBO, BRAZILIAN BUILT
GM
2.0
122
87-91
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.9279-1.9287" (48.969-48.989 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
Main:
Thrust Width:
3.461" (87.909 MM)
Rear Seal Diameter:
9028039, 90280399, R9028036, R90280395, R90280399
Casting Numbers:
Comments:
SOHC, TBI, BRAZILIAN PONTIAC
GM
2.0
122
3.3852-3.3868" (85.984-86.025 MM)
1.025 @ #3
88-90
3.3852-3.3868" (85.984-86.025 MM)

Stroke: 3.386" (86.004 MM)
Cyl Bore:
1.9279-1.9287" (48.969-48.989 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
1.025 @ #3
Main:
Thrust Width:
3.461" (87.909 MM)
Rear Seal Diameter:
902280399, 9028036, 9028039, 90409507, R9028036, R90280395, R90280399
Casting Numbers:
Comments:
SOHC, TBI, TURBO, BRAZILIAN BUILT
GM
2.0
122
88-91
3.3852-3.3868" (85.984-86.025 MM)

Stroke: 3.386" (86.004 MM)
Cyl Bore:
1.9279-1.9287" (48.969-48.989 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
1.025 @ #3
Main:
Thrust Width:
3.461" (87.909 MM)
Rear Seal Diameter:
902280399, 9028036, 9028039, 90280399, 90409507, R9028036, R90280395, R90280399
Casting Numbers:
Comments:
SOHC, TBI, BRAZILIAN, PONTIAC
GM
2.0
122
Stroke: 3.386" (86.004 MM)

1.9279-1.9287" (48.969-48.989 MM)
Rods:
2.2828-2.2833" (57.983-57.996 MM)
Main:
Main:
1.219" (30.963 MM)
3.541" (89.941 MM)
Rear Seal Diameter:
90409507, R9028036, R9028399
Casting Numbers:
Comments:
SOHC, MFI, PONTIAC SUNBIRD
GM
2.0
122
SUNBIRD
90-95
Cyl Bore:
3.386" (86.004 MM)
Thrust Width:
1.017 @ #3
TRACKER
99-01
L34
3.3071-3.3078" (84.000-84.020 MM)

Stroke: 3.5433" (90.000 MM)
Cyl Bore:
1.9678-1.9685" (49.982-50.000 MM)
Rods:
2.2828-2.2834" (57.982-58.000 MM)
Main:
Main:
Comments:
DOHC, 16V, TRACKER, L34 THRUST BRG THICKNESS STD .0984" (2.500 MM)
GM
2.0
122
Stroke: 3.160" (80.264 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1-3 2.2983-2.2993" (58.377-58.402 MM)
Main 1:
#4 2.3006" (58.435 MM)
Main:
Main 2:
#5 2.3011" (58.448 MM)
Main 3:
Comments:
DOHC, COSWORTH VEGA SPECIAL EDITION
COSW
VEGA
75-76
COSWORTH V
Cyl Bore:
3.500-3.502" (88.9-88.951 MM)
Thrust Width:
@ #4
188

Make
Liter
CID
Vin
Model
Year
GM
GM
4 Cylinders
2.2
134
Stroke: 3.724" (94.600 MM)

1.9291-1.9297" (49.000-49.014 MM)
Rods:
2.2045-2.2050" (55.994-56.007 MM)
Main:
Main:
3.535-3.543" (89.780-90.000 MM)
Rear Seal Diameter:
DOHC, ECOTEC, MFI, ALERO, CAVALIER, SATURN
Comments:
GM
2.2
134
2.2
134
GM
2.2
134
GM
2.2
134
2.2
134
2.2
134
GM
2.2
Thrust Width:
.947 @ #4
CAVALIER
94-97
LN2
3.5036-3.5043" (88.991-89.009 MM)
CAVALIER
98-02
Cyl Bore:
3.5036-3.5043" (88.991-89.009 MM)
Thrust Width:
.947 @ #4
Cyl Bore:
3.5036-3.5043" (88.991-89.009 MM)
Thrust Width:
.947 @ #4
LN2
90-91
SATURN
02-03
TRUCK
00-01
3.5036-3.5043" (88.991-89.009 MM)
LUV
Cyl Bore:
Thrust Width:
189
L61
3.3855-3.3861" (85.992-86.008 MM)
Cyl Bore:
Cyl Bore:
137
L61
91-94
3.5036-3.5043" (88.991-89.009 MM)
Stroke: 3.460" (88.000 MM)

1.9983-1.9994" (50.757-50.785 MM)
Rods:
2.4945-2.4954" (63.360-63.383 MM)
Main:
Main:
Comments:
MFI, S15/T15 SONOMA P/UP TRUCK
Stroke: 3.622" (91.999 MM)

2.0833-2.0838" (52.916-52.929 MM)
Rods:
2.3591-2.3594" (59.921-59.929 MM)
Main:
Main:
AY
Casting Numbers:
Comments:
DIESEL, CHEVY LUV
CAVALIER
Cyl Bore:
Stroke: 3.724" (94.600 MM)

1.9291-1.9297" (49.000-49.014 MM)
Rods:
2.2045-2.2050" (55.994-56.007 MM)
Main:
3.535-3.543" (89.780-90.000 MM)
Main:
Rear Seal Diameter:
Comments:
MFI, ECOTEC, DOHC, SATURN VUE
GM
@ #2
Stroke: 3.465" (88.011 MM)

1.9983-1.9994" (50.757-50.785 MM)
Rods:
#1 2.4945-2.4954" (63.36-63.383 MM)
Main:
Main:
Balance: Internal
2.991" (75.971 MM)
Rear Seal Diameter:
10103606, 1237
Casting Numbers:
Comments:
OHV, TBI, ALUMINUM HEAD, CHEVROLET
GM
Thrust Width:
Cyl Bore:
Stroke: 3.4650" (88.011 MM)

1.9983-1.9994" (50.757-50.785 MM)
Rods:
2.4945-2.4954" (63.36-63.383 MM)
Main:
Main:
Balance: Internal
2.991" (75.971 MM)
Rear Seal Diameter:
4618
Casting Numbers:
Comments:
LN2, 7MM VALVE STEM, ROLLER ROCKER
00-05
3.3855-3.3861" (85.992-86.008 MM)
Stroke: 3.4600" (87.884 MM)

1.9983-1.9994" (50.757-50.785 MM)
Rods:
2.4945-2.4954" (63.36-63.383 MM)
Main:
Main:
1003, 10103606, 1237, 4618, 6306
Casting Numbers:
Comments:
LN2, 7MM VALVE STEM
(cont.)
Cyl Bore:
Stroke: 3.465" (88.011 MM)

1.9983-1.9994" (50.757-50.785 MM)
Rods:
#1 2.4945-2.4954" (63.36-63.383 MM)
Main:
Main:
Balance: Internal
2.991" (75.971 MM)
Rear Seal Diameter:
1003, 10103606, 1237, 4618, 4618, 6306
Casting Numbers:
Comments:
OHV, MFI, ALUMINUM HEAD, CHEVROLET
GM
CAVALIER
Engine Model
81-85
3.465" (88.011 MM)
@ #3
L43

Make
Liter
CID
Vin
Model
Year
GM
4 Cylinders
2.3
GM
Stroke:
Rods:
138
3.3504" (85.1 MM)

1.8887-1.8897" (47.973-47.998 MM)
Comments:
ACHIEVA
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.0470-2.0480" (51.994-52.019 MM)

Main:
Main:
3.2210-3.2299" (81.813-82.039 MM)
Rear Seal Diameter:
22545690, 24546590, 25545690
Casting Numbers:
GM
(cont.)
92-95
L40
3.6217-3.6223" (91.991-92.006 MM)

.063" ROLLED (1.6 MM)
1.0925-1.1024" (27.75-28.001 MM)
.063" ROLLED (1.600 MM)
1.097 @ #3
SOHC, MFI, L40 ACHIEVA
2.3
138
88
Stroke: 3.350" (85.09 MM)

Cyl Bore:
1.8887-1.8897" (47.973-47.998 MM)
Rods:
Rod Fillet:
2.0470-2.0480" (51.994-52.019 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
3.221-3.229" (81.813-82.017 MM)
Rear Seal Diameter:
22532120, 22545690
Casting Numbers:
Comments:
DOHC, OLDSMOBILE QUAD 4 15 DEGREE ADVANCE CRANK
GM
Engine Model
2.3
138
3.622" (91.999 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
1.096 @ #3
88-95
LGO
3.6217-3.6223" (91.991-92.006 MM)

Stroke: 3.3504" (85.1 MM)
Cyl Bore:
1.8887-1.8897" (47.973-47.998 MM)
.063" ROLLED (1.6 MM)
Rods:
Rod Fillet:
2.0470-2.0480" (51.994-52.019 MM)
.063" ROLLED (1.600 MM)
Main:
Main Fillet:
1.097 @ #3
Main:
Thrust Width:
3.2210-3.2299" (81.813-82.039 MM)
Rear Seal Diameter:
1237, 22532120, 22545690, 2254590, 25545690
Casting Numbers:
Comments:
DOHC, MFI, QUAD 4, BALANCE SHAFT IN 95 15 DEGREE ADVANCE CRANK, SNOUT LENGTH 1.965"
*1995 .0005-.0023
GM
2.3
138
89-94
3.622" (91.999 MM)

Stroke: 3.350" (85.09 MM)
Cyl Bore:
1.8887-1.8897" (47.973-47.998 MM)
.063" ROLLED (1.6 MM)
Rods:
Rod Fillet:
2.0471-2.0480" (51.996-52.019 MM)
.063" ROLLED (1.600 MM0
Main:
Main Fillet:
1.096 @ #3
Main:
Thrust Width:
3.2210-3.2299" (81.813-82.039 MM)
Rear Seal Diameter:
22532120, 22545690, 2254690, 25545690
Casting Numbers:
Comments:
DOHC, OLDSMOBILE QUAD 4 15 DEGREE ADVANCE CRANK, 1.300 FRONT SNOUT DIAM
GM
2.3
138
Stroke: 3.3500" (85.09 MM)

1.8887-1.8897" (47.973-47.998 MM)
Rods:
2.0470-2.0480" (51.994-52.019 MM)
Main:
Main:
24574115
Casting Numbers:
Comments:
DOHC, BALANCE SHAFT ASSEMBLY
GM
2.3
Thrust Width:
140
2.3
140
GM
2.3
140
74-75
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.012 @ #4
Stroke: 3.625" (92.075 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
3994226, 3994227
Casting Numbers:
Comments:
CHEVROLET VEGA, ALUMINUM BLOCK
Stroke: 3.625" (92.075 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2933" (58.377-58.25 MM)
Main:
Main:
3977109, 3994226, 3994227
Casting Numbers:
Comments:
VEGA, 1BBL CARB
@ #3
Stroke: 3.625" (92.075 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
3994226, 3994227
Casting Numbers:
Comments:
CHEVROLET, 2BBL
GM
94-95
3.6200" (91.948 MM)
Cyl Bore:
VEGA
71-76
Cyl Bore:
3.501" (88.925 MM)
Thrust Width:
1.012 @ #4
VEGA
74-75
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.012 @ #4
190
LD2

Make
Liter
CID
Vin
Model
Year
GM
4 Cylinders
2.3
GM
140
Stroke: 3.625" (92.075 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
3977109, 3994226, 3994227
Casting Numbers:
Comments:
GM
Stroke:
Rods:
VEGA
3.500" (88.9 MM)
Thrust Width:
1.012 @ #4
VEGA, 1BBL
2.4
146
3.700" (93.98 MM)

1.8887-1.8897" (47.973-47.998 MM)
ACHIEVA
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.5
151
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
01, 017, 077, 684, 777
Casting Numbers:
Comments:
TBI, RWD, S-10, FIERO 22.25 LONG
GM
2.5
151
96-02
3.5431-3.5435" (89.995-90.005 MM)

.063" ROLLED (1.600 MM)
.9220-.9350" (23.419-23.749 MM)
.063" ROLLED (1.600 MM)
1.0959-1.0989" @ #3
2.5
151
GM
2.5
151
83-86
4.000" (101.6 MM)
.078" (1.981 MM)
.078
1.014 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.197 MM)
1.012 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
77-79
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
311, 3937752, 499311, 4993111, 684, 777
Casting Numbers:
Comments:
PONTIAC, 2BBL 22.25 LONG
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
4993111, 684, 777
Casting Numbers:
Comments:
FIERO
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
499311, 4993111, 684, 777
Casting Numbers:
Comments:
GM
(cont.)
76-77
Cyl Bore:
2.3622-2.3631" (60.-60.023 MM)

Main:
Main:
Balance: Internal
3.2210-3.2299" (81.813-82.039 MM)
Rear Seal Diameter:
4620
Casting Numbers:
Comments:
DOHC,SFI,CAVALIER,SUNFIRE,GRAND AM,ACHIEVA,SKYLARK 1.093 THRUST BRG LENGTH STD
GM
Engine Model
78-80
79-79
191
LD9

Make
Liter
CID
Vin
Model
GM
GM
GM
2.5
151
2.5
151
2.5
151
2.5
151
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.078" (1.981 MM)
.078" (1.981 MM)
1.013 @ #4
2.5
151
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

3/64 ROLLED
1/16 ROLLED
.945 @ #5
2.5
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
017
Casting Numbers:
Comments:
TBI, FWD & RWD 20.5" LONG
151
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.047" ROLLED (1.194 MM)
.047" ROLLED (1.194 MM)
.948 @ #5
82-83
82-83
82-86
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
771
Casting Numbers:
Comments:
TBI PONTIAC 20.5" LONG
GM
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
01, 017, 381, 543, 684, 777
Casting Numbers:
Comments:
TBI, PONTIAC, RWD 22.25 LONG
GM
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
684, 777
Casting Numbers:
Comments:
TBI PONTIAC 22.25 LONG
GM
79-83
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
PONTIAC, FWD, 2BBL 22.25 LONG
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
684
Casting Numbers:
Comments:
GM
Engine Model
4 Cylinders
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
684, 684777, 777
Casting Numbers:
Comments:
Year
85-86
85-87
192
(cont.)

Make
Liter
CID
Vin
Model
GM
GM
GM
Engine Model
4 Cylinders
2.5
151
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
017, 381, 405, 543
Casting Numbers:
Comments:
Year
87-88
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.078" (1.981 MM)
.078" (1.981 MM)
1.013 @ #5
TBI PONTIAC 22.25 LONG, RELUCTOR RING W/NO INTEGRAL GEAR
2.5
151
87-88
4.000" (101.6 MM)

Stroke: 3.000" (76.2 MM)
Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
.047" ROLLED (1.194 MM)
Rods:
Rod Fillet:
2.2983-2.2993" (58.377-58.402 MM)
.063" ROLLED (1.600 MM)
Main:
Main Fillet:
.945 @ #5
Main:
Thrust Width:
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
390, 406, 540, 625
Casting Numbers:
Comments:
TBI PONTIAC 20.5" LONG, MAY/MAY NOT HAVE GEAR ON RELUCTOR RING OF 78 OR 82 TEETH
GM
2.5
151
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
10044543, 405, 543
Casting Numbers:
Comments:
TBI, PONTIAC 22.25 LONG
GM
2.5
89
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
151
89-91
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
Rod Fillet:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
10044540, 406, 540
Casting Numbers:
Comments:
TBI PONTIAC 20.5" LONG, RELUCTOR RING W/78 OR 82 TEETH
GM
2.5
151
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
10044543, 405, 543
Casting Numbers:
Comments:
TBI PONTIAC 22.25 LONG, W/78 TOOTH GEAR
GM
2.5
151
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
017, 10044543, 381, 405, 543
Casting Numbers:
Comments:
TBI, RWD, S-10 20.5" LONG, W/78 TOOTH GEAR
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
4.000" (101.6 MM)

.047" ROLLED (1.194 MM)
.063" ROLLED (1.600 MM)
.950 @ #4
90-92
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
S-10
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
193
4.000" (101.6 MM)

.047" (1.194 MM)
.047" (1.194 MM)
1.012 @ #5
87-91
4.000" (101.6 MM)
.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
.948 @ #5
(cont.)

Make
Liter
CID
Vin
Model
Year
GM
4 Cylinders
2.5
GM
151
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1.249" (31.725 MM)
2.990" (75.946 MM)
Rear Seal Diameter:
10044543, 405, 543
Casting Numbers:
Comments:
GM
Stroke:
Rods:
S-10
2.5
153
Cyl Bore:
3.8745-3.8775" (98.412-98.489 MM)
IND
3.250" (82.55 MM)

1.9990-2.0000" (50.775-50.8 MM)
2.8
170
62-80
3.0
181
3.0
3.2
3.9
COLORADO
04-05
195
235
LK5, 2800
Cyl Bore:
3.6638-3.6644" (92.990-93.006 MM)
Thrust Width:
@ #5
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.014 @ #5
Cyl Bore:
4.000" (101.600 MM)
Thrust Width:
1.014" @ #5
74-93
94-04
Stroke: 3.750" (95.25 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
539000, 539732, 542239, 544100
Casting Numbers:
Comments:
PONTIAC TEMPEST
GM
1.015 @ #5
181
Stroke: 3.600" (91.440 MM)

2.0990-2.1000" (53.315-53.340 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Comments:
2BBL CARB
GM
1.040" (26.416 MM)
IND
Stroke: 3.600" (91.44 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
N14094624, N393775, N393776, N3941352
Casting Numbers:
Comments:
INDUSTRIAL & MARINE
GM
91-93
4.000" (101.6 MM)
.047" ROLLED (1.194 MM)
.047" ROLLED (1.194 MM)
.948 @ #5
TBI, S-10 TRUCK, HIGH OUTPUT 20.5" LONG
Stroke: 4.020" (102.000 MM)

2.2319-2.2326" (56.691-56.707 MM)
Rods:
2.7567-2.7574" (69.968-69.984 MM)
Main:
Main:
Comments:
DOHC, SFI, COLORADO
GM
(cont.)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Rod Width:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Thrust Width:
3788522, 3788522, 3793080, 3793082, 5743014
Casting Numbers:
Comments:
IND/MARINE, 110 & 120 MERCRUISER/OMC
GM
Engine Model
TEMPEST
61-63
Cyl Bore:
4.062" (103.175 MM)
Thrust Width:
1.139 @ #4
85-94
4BD2-TC
4.0157" (101.999 MM)

Stroke: 4.646" (118.008 MM)
Cyl Bore:
2.5165-2.5175*" (63.919-63.945 MM)
Rods:
3.1464-3.1472*" (79.919-79.939 MM)
Main:
Main:
Comments:
4BD2-TC DIESEL, WR TRUCKS * ISUZU DOES NOT RECOMMEND GRINDING THEIR TURBO
CRANKSHAFTS UNDERSIZE.
GM
GM
5 Cylinders
3.5
Stroke: 4.0157" (102.000 MM)

2.2319-2.2325" (56.691-56.707 MM)
Rods:
2.7567-2.7574" (70.020-70.038 MM)
Main:
Main:
DOHC, SFI, CANYON
Comments:
213
COLORADO
04-06
Cyl Bore:
3.6627-3.6633" (93.033-93.048 MM)
Thrust Width:
@ #5
194
L52

Make
Liter
CID
Vin
Model
Year
GM
GM
6 Cylinders
2.3
140
CORVAIR
Stroke: 2.593" (65.862 MM)

1.7990-1.8000" (45.695-45.72 MM)
Rods:
2.0978-2.0988" (53.284-53.31 MM)
Main:
Main:
CHEVROLET CORVAIR
Comments:
GM
2.3
140
2.4
3.375" (85.725 MM)
Thrust Width:
1.000 @ #4
VEGA
2.6
3.375" (85.725 MM)
Thrust Width:
1.012 @ #4
145
158
CORVAIR
Stroke: 3.134" (79.600 MM)

1.9281-1.9287" (48.974-48.990 MM)
Rods:
2.6764-2.6770" (67.980-67.996 MM)
Main:
Main:
Comments:
CADILLAC CTS
GM
2.7
164
GM
2.8
173
1.000 @ #4
03-06
FIERO
64-69
3.4375" (87.313 MM)
1.0030 @ #4
85-88
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.6 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.600 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
2.6472-2.6482" (67.239-67.264 MM)

Main:
Main:
1.252" (31.801 MM)
2.992**" (75.997 MM)
Rear Seal Diameter:
481, 504, 526, 817
Casting Numbers:
Comments:
MFI, FIERO, CHEVROLET, 2ND DESIGN CAST #817 IS EXTERNAL,#481 & 526 ARE INTERNAL/BAL **REAR
SEAL HOUSING - 3.622"
GM
Stroke:
Rods:
2.8
173
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
2.4937-2.4946" (63.34-63.363 MM)

Main:
Main:
Balance: External
1.252" (31.801 MM)
2.992" (75.997 MM)
Rear Seal Diameter:
264, 504
Casting Numbers:
Comments:
2BC, FWD, 1ST DESIGN, CHEVROLET
79-80
195
LY9
3.2745-3.2766" (83.173-83.225 MM)
CORVAIR
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
61-63
3.4375" (87.313 MM)
CADILLAC CTS
Cyl Bore:
Stroke: 2.940" (74.676 MM)

Cyl Bore:
1.7990-1.8000" (45.695-45.72 MM)
Rods:
2.0978-2.0988" (53.284-53.31 MM)
Main:
Main:
Thrust Width:
3828409, 835508, 835512, 836419, 836523, 8409
Casting Numbers:
Comments:
CHEVROLET CORVAIR OPPOSED CYLS AIR COOLED
Stroke:
Rods:
76-77
Cyl Bore:
Stroke: 2.593" (65.862 MM)

Cyl Bore:
1.7990-1.8000" (45.695-45.72 MM)
Rods:
2.0987-2.0988" (53.307-53.31 MM)
Main:
Main:
Thrust Width:
Comments:
CHEVROLET CORVAIR OPPOSED CYLS AIR COOLED
GM
60-63
Cyl Bore:
Stroke: 2.600" (66.040 MM)

2.1247-2.1252" (53.967-53.98 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
3994226, 3994227
Casting Numbers:
Comments:
VEGA, 2BBL STAGED WEBER CARB
GM
Engine Model
110

Make
Liter
CID
Vin
Model
GM
6 Cylinders
2.8
GM
Stroke:
Rods:
173
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
Comments:
GM
GM
2.8
173
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
2.8
173
82-84
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.600 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.6 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.6 MM)
.867" (22.022 MM)
.063
.9450 @ #3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5039" (88.999 MM)

.063" (1.600 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
82-85
#1 2.4937-2.4946" (63.34-63.363 MM)

Main:
Main:
Balance: External
1.252" (31.801 MM)
2.992" (75.997 MM) *
Rear Seal Diameter:
264, 504, 504, 817
Casting Numbers:
Comments:
2BC, RWD, CHEVROLET, 1ST DESIGN *REAR SEAL HOUSING - 3.622"
GM
Stroke:
Rods:
2.8
173
2.992" (75.997 MM)

1.9983-1.9993" (50.757-50.782 MM)
82-85
2.4937-2.4946" (63.34-63.363 MM)

Main:
Main:
Balance: External
1.252" (31.801 MM)
2.992*" (75.997 MM)
Rear Seal Diameter:
264, 504, 504, 817
Casting Numbers:
Comments:
2BC, 1ST DESIGN, CHEVROLET *REAR SEAL HOUSING - 3.622"
GM
Stroke:
Rods:
3.5039" (88.999 MM)

.063" (1.600 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
2BC, FWD, 1ST DESIGN, CHEVROLET *REAR SEAL HOUSING: 3.622
2.4937-2.4946" (63.34-63.363 MM)

Main:
Main:
Balance: External
1.252" (31.801 MM)
2.992" (75.997 MM)
Rear Seal Diameter:
264, 504, 817
Casting Numbers:
Comments:
2BC, HO, FWD, 1ST DESIGN, CHEVROLET
Stroke:
Rods:
(cont.)
80-86
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.4937-2.4946" (63.34-63.363 MM)

Main:
Main:
Balance: External
1.252" (31.801 MM)
2.992" (75.997 MM) *
Rear Seal Diameter:
264, 504, 504, 817
Casting Numbers:
Stroke:
Rods:
Engine Model
Year
2.8
2.992" (75.997 MM)
1.9984-1.9994" (50.759-50.785 MM)
173
85-86
2.6472-2.6482" (67.239-67.264 MM)

Main:
Main:
1.252" (31.801 MM)
2.992" (75.997 MM) **
Rear Seal Diameter:
504, 817
Casting Numbers:
Comments:
MFI, FWD, CHEVROLET, 2ND DESIGN *CAST 817 EXTERNAL BALANCE, 481 & 526 INTERNAL
SEAL HOUSING 3.622
196
**REAR

Make
Liter
CID
Vin
Model
Year
GM
6 Cylinders
2.8
GM
Stroke:
Rods:
173
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
Comments:
GM
Stroke:
Rods:
3.5039" (88.999 MM)

.063" (1.600 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
RWD, CHEVROLET, 2ND DESIGN *CAST 817 EXTERNAL BALANCE, 481 & 526 INTERNAL
HOUSING - 3.622"
2.8
173
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
(cont.)
85-92
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.6472-2.6482" (67.239-67.264 MM)

Main:
Main:
1.252" (31.801 MM)
2.992" (75.997 MM) **
Rear Seal Diameter:
481, 504, 526, 817
Casting Numbers:
Engine Model
**REAR SEAL
87-89
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5046-3.5053" (89.017-89.035 MM)

.063" (1.600 MM)
.867" (22.022 MM)
.063" (1.600 MM)
.9450 @ #3
2.6472-2.6482" (67.239-67.264 MM)

Main:
Main:
1.252" (31.801 MM)
2.992" (75.997 MM) **
Rear Seal Diameter:
481, 526, 817
Casting Numbers:
Comments:
MFI, FWD, 2ND DESIGN, CHEVROLET, ALUMINUM HEADS *CAST 817 EXTERNAL BALANCE, 481 & 526
INTERNAL **REAR SEAL HOUSING - 3.622"
GM
Stroke:
Rods:
2.8
173
2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
SONOMA
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
86-93
3.5035-3.5067" (88.989-89.07 MM)

.063" (1.6 MM)
.867" (22.022 MM)
.063
.9450 @ #3
2.6472-2.6482" (67.239-67.264 MM)

Main:
Main:
Balance: Internal
1.252" (31.801 MM)
2.992**" (75.997 MM)
Rear Seal Diameter:
481, 526, 817
Casting Numbers:
Comments:
TBI, RWD, 2ND DESIGN, CHEVROLET, SONOMA *CAST #817 EXTERNAL, #481 & 526 INTERNAL BALANCE
**REAR SEAL HOUSING - 3.622"
GM
3.0
181
Stroke: 3.3464" (84.999 MM)

2.1248-2.1256" (53.971-53.990 MM)
Rods:
2.6763-2.6770" (67.978 TO 67.996 MM)
Main:
Main:
Comments:
DOHC, 54 VEE, CATERA, SATURN
GM
3.0
CATERA
Cyl Bore:
181
97-04
3.3848-3.3868" (85.974-86.025 MM)
82-85
3.800" (96.52 MM)

Stroke: 2.660" (67.564 MM)
Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
2.4990-2.5000" (63.475-63.5 MM)
.109" (2.769 MM)
Main:
Main Fillet:
1.062 @ #2
Main:
Thrust Width:
Balance: Internal
2.6570" (67.488 MM)
Rear Seal Diameter:
257, 404, 732
Casting Numbers:
Comments:
BUICK, HIGH DECK BLOCK, O.S. OD CAM BRG AVLBL THRUST BRG LNGTH 1.058
GM
3.0
181
85-86
3.800" (96.52 MM)

Stroke: 2.660" (67.564 MM)
Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
2.4990-2.5000" (63.475-63.5 MM)
.109" (2.769 MM)
Main:
Main Fillet:
1.062 @ #2
Main:
Thrust Width:
Balance: Internal
2.6570" (67.488 MM)
Rear Seal Diameter:
732
Casting Numbers:
Comments:
MFI, LOW DECK BLOCK, BUICK #732 CRANKSHAFT USED WITH SHORTENED DECK
THRUST BRG
LNGTH 1.058
197
L81

Make
Liter
CID
Vin
Model
Year
GM
GM
6 Cylinders
3.0
181
Stroke: 2.660" (67.564 MM)

2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
732
Casting Numbers:
Comments:
GM
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
MFI, LOW DECK BLOCK, BUICK
3.1
191
3.1
191
FIREBIRD
Stroke: 3.307" (83.998 MM)

1.9984-1.9994" (50.759-50.785 MM)
Rods:
2.6472-2.6482" (67.239-67.264 MM)
Main:
Main:
Balance: Internal
1.252" (31.801 MM)
2.992" (75.997 MM)
Rear Seal Diameter:
981
Casting Numbers:
Comments:
MFI, FWD TURBO, GRAND PRIX
GM
3.1
191
3.1
191
GM
3.1
191
89-90
90-95
GM
3.2
194
93-99
AC
29-32
Cyl Bore:
198
LG8
3.5046-3.5053" (89.017-89.035 MM)

.063" (1.600 MM)
.063" (1.600 MM)
.946" @ #3
3.5046-3.5053" (89.017-89.035 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9987-1.9994" (50.767-50.785 MM) **
.063" (1.600 MM)
Rods:
Rod Fillet:
2.6473-2.6483" (67.241-67.267 MM)
.063" (1.600 MM)
Main:
Main Fillet:
.946 @ #3
Main:
Thrust Width:
Balance: External
2.992" (75.997 MM)
Rear Seal Diameter:
268, 981
Casting Numbers:
Comments:
SFI, 3100 FWD, 60, V-6, L82, ROLLER CAM *1995 .0012-.0030, **1.9982-1.9984
THRUST BRG
LENGTH STD: .942
Stroke: 3.250" (82.55 MM)
1.9980-1.9990" (50.749-50.775 MM)
Rods:
1 1.9355-1.9365" (49.162-49.187 MM)
Main 1:
2 1.9975-1.9985" (50.737-50.762 MM)
Main:
Main 2:
3 2.0606-2.0615" (52.339-52.362 MM)
Main 3:
Comments:
CHEVROLET MODEL AC
LG6
3.5046-3.5053" (89.017-89.035 MM)

.063" (1.600 MM)
.063" (1.600 MM)
.946 @ #3
00-03
Stroke: 3.307" (83.998 MM)

Cyl Bore:
1.9987-1.9994" (50.767-50.785 MM)
Rods:
Rod Fillet:
2.6473-2.6483" (67.241-67.267 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
2.992" (75.997 MM)
Rear Seal Diameter:
268, 981
Casting Numbers:
Comments:
SFI, 3100 FWD, 60 V-6, ROLLER CAM THRUST BRG LENGTH STD .942"
LH0
3.5046-3.5053" (89.017-89.035 MM)

.063" (1.600 MM)
.063" (1.600 MM)
.946 @ #3
LUMINA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
89-94
3.5046-3.5053" (89.017-89.035 MM)

.063" (1.600 MM)
.063" (1.600 MM)
.946 @ #3
GRAND PRIX
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.307" (83.998 MM)

1.9984-1.9994" (50.759-50.785 MM)
Rods:
2.6472-2.6482" (67.239-67.264 MM)
Main:
Main:
Balance: Internal
1.252" (31.801 MM)
2.992" (75.997 MM)
Rear Seal Diameter:
334, 981
Casting Numbers:
Comments:
RWD, FWD, LUMINA APV, 60 V-6, LG6
GM
(cont.)
87-88
Cyl Bore:
Stroke: 3.307" (83.998 MM)

Cyl Bore:
1.9984-1.9994" (50.759-50.785 MM)
Rods:
Rod Fillet:
2.6472-2.6482" (67.239-67.264 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
1.252" (31.801 MM)
2.992" (75.997 MM)
Rear Seal Diameter:
981
Casting Numbers:
Comments:
MFI, FWD & RWD FIREBIRD, 60 V-6, CHEVROLET LH0
GM
Engine Model
3.3125" (84.138 MM)
L82

Make
Liter
CID
Vin
Model
Year
GM
6 Cylinders
3.2
GM
194
Engine Model
(cont.)
62-72
3.5625" (90.488 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
1.0120 @ #7
Main:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3788423, 3788424, 3788428, 3820618, 3864465, 3899424, 3955977, 5743013
Casting Numbers:
Comments:
GM
CHEVROLET
3.2
195
Stroke: 3.465" (88.000 MM)

2.6764-2.6770" (67.980-67.996 MM)
Main:
Main:
Comments:
CADILLAC CTS
GM
3.2
CADILLAC
196
GM
3.2
198
GM
3.3
3.3
1.0150 @ #2
62-65
3.625" (92.075 MM)
@ #2
Thrust Width:
78-79
Stroke: 3.480" (88.392 MM)

Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.4484-2.4493" (62.189-62.212 MM)
Main 1:
2.4484-2.4493" (62.189-62.212 MM)
Main:
Main 2:
Thrust Width:
2.4481-2.4490" (62.182-62.205 MM)
Main 3:
2.4479-2.4488" (62.177-62.2 MM)
Main 4:
135411, 1354N, 143, 147, 726N
Casting Numbers:
Comments:
2BC, CHEVROLET * #4 JOURNAL OIL CLEAR .0011-.0041
GM
3.500" (88.9 MM)
198
Cyl Bore:
200
204
LA3
78-79
Stroke: 3.400" (86.36 MM)

Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
Thrust Width:
2.4300-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1255624, 1255674, 1257125, 1260877, 229, 25511229
Casting Numbers:
Comments:
2BC, BUICK, O.S. OD CAM BRG AVLBL
Stroke: 3.200" (81.28 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1349429, 1349929
Casting Numbers:
Comments:
BUICK
03-05
3.4439-3.4459" (87.475-87.525 MM)
Cyl Bore:
3.4995-3.5025" (88.887-88.964 MM)
1.7240 @ #4
89-93
3.700" (93.98 MM)

Stroke: 3.160" (80.264 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4988-2.4998" (63.47-63.495 MM)
Main:
1.063 @ #2
Main:
Thrust Width:
2.656" (67.462 MM) *(SEE BELOW)
Rear Seal Diameter:
1235413, 25532694, 385, 4817, 694, 817
Casting Numbers:
Comments:
BUICK 3300, SKYLARK, MFI, 90V-6, ROLLER CAM * 91-93 CRANKS: 3.228 ONE PIECE REAR SEAL
GM
3.4
204
GRAND AM
Stroke: 3.307" (83.998 MM)

Cyl Bore:
1.9987-1.9994" (50.767-50.785 MM)
Rods:
2.6473-2.6483" (67.241-67.267 MM)
Main:
Main:
Thrust Width:
268, 924, X153
Casting Numbers:
Comments:
CAM IN BLOCK, TRANSPORT, LUMINA, GRAND AM, ALERO
GM
3.4
Stroke: 3.3100" (84.074 MM)

1.9987-1.9994" (50.767-50.785 MM)
Rods:
2.6473-2.6483" (67.241-67.267 MM)
Main:
Main:
268
Casting Numbers:
Comments:
SFI, GRAND AM, OHV, 60 V6
207
199
LA1
@ #3
ALERO
Cyl Bore:
96-04
3.6228-3.6235" (92.019-92.037 MM)
99-00
3.6228-3.6235" (92.019-92.037 MM)
LA1

Make
Liter
CID
Vin
Model
Year
GM
GM
6 Cylinders
3.4
207
Stroke: 3.310" (84.074 MM)

1.9987-1.9994" (50.767-50.785 MM)
Rods:
2.6473-2.6479" (67.241-67.257 MM)
Main:
Main:
268, 924, X153
Casting Numbers:
Comments:
GM
CAMARO
Cyl Bore:
3.4
207
3.4
207
3.4
CUTLASS
3.5
206
3.5
GM
3.5
212
214
Stroke: 3.307" (84.000 MM)

2.2488-2.2495" (57.122-57.138 MM)
Rods:
2.6472-2.6479" (67.239-67.257 MM)
Main:
Main:
Comments:
MALIBU, 60r V6
GM
3.5
91-95
3.6224-3.6231" (92.009-92.027 MM)
Thrust Width:
.946 @ #3
DE LUXE 6
LQ1
LQ1
35-36
3.375" (85.725 MM)
Cyl Bore:
@ REAR
Thrust Width:
OLD
29-38
Cyl Bore:
Rod Fillet:
Main Fillet:
3.3125" (84.138 MM)

.125" (3.175 MM)
.125" (3.175 MM)
Cyl Bore:
3.5230" (89.484 MM)
Thrust Width:
.945 @ #3
Stroke: 3.6220" (91.999 MM)

2.1829-2.1835" (55.446-55.461 MM)
Rods:
2.7550-2.7560" (69.977-70.002 MM)
Main:
Main:
3.770-3.780" (95.758-96.012 MM)
Rear Seal Diameter:
Comments:
DOHC 90, LX5
95-97
3.6228-3.6235" (92.019-92.037 MM)
Cyl Bore:
208
Stroke: 4.000" (101.6 MM)

2.1230-2.1240" (53.924-53.95 MM)
Rods:
2.0580-2.0590" (52.273-52.299 MM)
Main 1:
2.1205-2.1215" (53.861-53.886 MM)
Main:
Main 2:
2.1830-2.1840" (55.448-55.474 MM)
Main 3:
48815, 836953, 837631, 866953
Casting Numbers:
Comments:
CHEVROLET
GM
L32
@ #3
Stroke: 3.875" (98.425 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
FRONT 2.2455-2.2465" (57.036-57.061 MM)
Main 1:
#2 2.2767-2.2777" (57.828-57.854 MM)
Main:
Main 2:
#3 2.3080-2.3090" (58.623-58.649 MM)
Main 3:
REAR 2.3705-2.3715" (60.211-60.236 MM)
Main 4:
Comments:
PONTIAC, MASTER 6, DE LUXE 6
GM
93-95
MFI, OHV, 60 V6, 12 VALVE CAMARO, L32
Stroke: 3.307" (83.998 MM)

1.9987-1.9994" (50.767-50.785 MM)
Rods:
2.6473-2.6479" (67.241-67.257 MM)
Main:
Main:
924, 981, X153
Casting Numbers:
Comments:
DOHC, 60 V6, MFI, 24 VALVE
GM
(cont.)
3.6224-3.6231" (92.009-92.027 MM)
Thrust Width:
Stroke: 3.307" (83.998 MM)

Cyl Bore:
1.9987-1.9994" (50.767-50.785 MM)
Rods:
2.6472-2.6479" (67.239-67.257 MM)
Main:
Main:
924, 981, X153
Casting Numbers:
Comments:
DOHC 60 V6 , 24 VALVE LUMINA, GRANDPRIX, CUTLASS,
GM
Engine Model
98-03
MALIBU
04-06
Cyl Bore:
3.700-3.701" (93.991-94.009 MM)
Thrust Width:
.941-.949" (23.900-24.100 MM)
215
TEMPEST
Stroke: 3.250" (82.550 MM)

Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Thrust Width:
3788423, 3788424, 3788428, 3820618, 3864465, 8424, 9782279
Casting Numbers:
Comments:
PONTIAC TEMPEST
200
64-65
3.750" (95.250 MM)
1.062 @ #7
LX5
LX9

Make
Liter
CID
Vin
Model
Year
GM
6 Cylinders
3.5
GM
216
GM
Stroke:
Rods:
(cont.)
37-52
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.3110-2.3120" (58.699-58.725 MM)
Rods:
Rod Fillet:
#1 2.6835-2.6845" (68.161-68.186 MM)
Main 1:
Main Fillet:
#2 2.7145-2.7155" (68.948-68.974 MM)
Main 2:
Thrust Width:
#3 2.7455-2.7465" (69.736-69.761 MM)
Main 3:
#4 2.7765-2.7775" (70.523-70.549 MM)
Main 4:
Balance: Internal
3726271, 3835271, 3875271, 838281, 838877, 839111, 839775
Casting Numbers:
Comments:
Engine Model
3.500" (88.900 MM)

5/64
5/64
1.4380
CHEVROLET, TRUCK
3.6
217
3.370" (85.600 MM)

2.2044-2.2050" (55.992-56.008 MM)
CADILLAC
04-06
LY7
3.7005-3.7011" (93.992-94.008 MM)
Cyl Bore:
.8661" (22.000 MM)

Rod Width:
2.6768-2.6775" (67.992-68.008 MM)
Main:
Main:
Comments:
CADILLAC STS, DOHC CRANK PILOT BEARING BORE DIAM .8254-.8266" (20.965-20.995 MM)
GM
3.7
223
DE LUXE 6
Stroke: 4.0000" (101.6 MM)

2.1237-2.1247" (53.942-53.967 MM)
Rods:
FRONT 2.4982-2.4992" (63.454-63.48 MM)
Main 1:
#2 2.5294-2.5304" (64.247-64.272 MM)
Main:
Main 2:
#3 2.5919-2.5929" (65.834-65.86 MM)
Main 3:
REAR 2.6232-2.6242" (66.629-66.655 MM)
Main 4:
501784
Casting Numbers:
Comments:
PONTIAC, QUALITY 6, DE LUXE 6
GM
3.7
223
GM
3.7
3.4375" (87.313 MM)
Cyl Bore:
3.438" (87.325 MM)
PONT
Stroke: 4.000" (101.6 MM)

1.9975-1.9985" (50.737-50.762 MM)
Rods:
FRONT 2.3725-2.3735" (60.262-60.287 MM)
Main 1:
#2 2.4037-2.4047" (61.054-61.079 MM)
Main:
Main 2:
#3 2.4662-2.4672" (62.641-62.667 MM)
Main 3:
REAR 2.4975-2.4985" (63.437-63.462 MM)
Main 4:
5000094
Casting Numbers:
Comments:
PONTIAC 6-37 & 6-38, 222.7 CID
39-40
Cyl Bore:
37-38
@ REAR
Thrust Width:
224
40-47
3.563" (90.5 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.3120-2.3120" (58.725-58.725 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.6845-2.6845" (68.186-68.186 MM)
.125" (3.175 MM)
Main 1:
Main Fillet:
#2 2.7155-2.7155" (68.974-68.974 MM)
1.4375
Main:
Main 2:
Thrust Width:
#3 2.7465-2.7465" (69.761-69.761 MM)
Main 3:
#4 2.7775-2.7775" (70.549-70.549 MM)
Main 4:
1255645, 1357898, 1378351, 1378354, 2144958, 2191127, 2194570, 230377, 230378, 3726271, 3835271,
Casting Numbers:
3836271, 6107432, 839111, 839775
Comments:
GMC
GM
3.7
225
64-67
Stroke: 3.400" (86.36 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
Thrust Width:
1255645, 1255646, 1255845, 1357898, 1378351, 1378354
Casting Numbers:
Comments:
BUICK, MARINE ALSO & JEEP
GM
3.7
Stroke: 3.8130" (96.8502 MM)

2.3110-2.3120" (58.6994-58.7248 MM)
Rods:
2.6835-2.6845" (68.1609-68.1863 MM)
Main 1:
2.7145-2.7155" (68.9483-68.9737 MM)
Main:
Main 2:
2.7455-2.7465" (69.7357-69.7611 MM)
Main 3:
2.7765-2.7775" (70.5231-70.5485 MM)
Main 4:
2191127, 2194570, 6107342
Casting Numbers:
Comments:
GAS ENGINE
228
3.750" (95.25 MM)
1.062 @ #2
TRUCK
Cyl Bore:
201
39-51
3.5625" (90.4875 MM)

Make
Liter
CID
Vin
Model
GM
3.8
GM
GM
229
80-82
Cyl Bore:
3.736" (94.894 MM)
Thrust Width:
1.722" @ #4
Cyl Bore:
3.736" (94.894 MM)
Thrust Width:
1.722" @ #4
2BC, CHEVROLET
3.8
229
Stroke: 3.400" (86.36 MM)

2.0986-2.0998" (53.304-53.335 MM)
Rods:
#1 2.4484-2.4493" (62.189-62.212 MM)
Main:
Main:
1354N, 726, 726N
Casting Numbers:
Comments:
2BC, CHEVROLET
GM
3.8
230
83-84
63-70
Stroke: 3.250" (82.55 MM)

Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3788423, 3788424, 3788428, 3820618, 3864465, 8424, 9782279
Casting Numbers:
Comments:
CHEVROLET
GM
3.8
3.8
3.8750" (98.425 MM)
1.013 @ #7
230
65-68
Stroke: 3.250" (82.55 MM)

1.9990-2.000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.432-2.442" (61.772-62.026 MM)
Rear Seal Diameter:
3788423, 3788424, 3788428
Casting Numbers:
Comments:
SOHC PONTIAC INLINE SIX, ALSO USED BY JEEP
GM
Engine Model
6 Cylinders
Stroke: 3.484" (88.494 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
1-3 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
4 2.4478-2.4488" (62.174-62.2 MM)
Main 2:
1354N, 726, 726N
Casting Numbers:
Comments:
Year
231
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.012 @ #7
GRAND NATIONA
86-88
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.500" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255624, 1255674, 1257125, 1260877, 1755674, 229, 25511229, 877229
Casting Numbers:
Comments:
MPFI, TURBO, GRAND NATIONAL
GM
3.8
231
75-77
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
1.9995-2.0005" (50.673-50.812 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255645, 1255845, 1255846, 1257125, 1260877, 1357898, 1378351, 1378354, 1755674, 877229
Casting Numbers:
Comments:
2BC, BUICK, ODDFIRE
GM
3.8
231
Stroke: 3.400" (86.36 MM)

2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255674, 1257125, 1260877, 877229
Casting Numbers:
Comments:
2BC, BUICK
GM
3.8
231
Stroke: 3.400" (86.36 MM)

2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1257125, 1260877, 1755674, 877229
Casting Numbers:
Comments:
2BC, TURBO, BUICK, O.S. OD CAM BRG AVLBL
78
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
78
202
(cont.)

Make
Liter
CID
Vin
Model
GM
Year
Engine Model
6 Cylinders
3.8
GM
231
(cont.)
78-81
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255674, 1257125, 1260877, 1755674, 229, 25505554, 25511229, 877229
Casting Numbers:
Comments:
GM
4BC, TURBO
3.8
231
78-81
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
125, 1255624, 1255674, 1257125, 1260877, 1755674, 229, 25505554, 25511229, 877, 877229
Casting Numbers:
Comments:
2BC, BUICK
GM
3.8
231
Stroke: 3.400" (86.36 MM)

2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255674, 1257125, 1260877, 877229
Casting Numbers:
Comments:
2BC, BUICK
GM
3.8
231
3.8
231
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
Stroke: 3.400" (86.36 MM)

2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1257125, 1260877, 1755674, 877229
Casting Numbers:
Comments:
4BC, BUICK
GM
79
Cyl Bore:
82
82
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255624, 1255674, 1257125, 1260877, 1354N, 1755674, 229, 25505554, 25511229, 726N, 877229
Casting Numbers:
Comments:
2BC, BUICK
GM
3.8
231
83
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255674, 1257125, 1260877, 1755674, 229, 25505554, 25511229, 877229
Casting Numbers:
Comments:
4BC, TURBO, BUICK
GM
3.8
231
83-87
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255624, 1257125, 1260877, 1354N, 1755674, 229, 25511229, 267, 726N, 877, 877229
Casting Numbers:
Comments:
2BC, BUICK
203

Make
Liter
CID
Vin
Model
GM
Year
Engine Model
6 Cylinders
3.8
GM
231
84-85
3.800" (96.52 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
1.062 @ #2
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255624, 1255674, 1257125, 1260877, 1755674, 229, 25511229, 877229
Casting Numbers:
Comments:
GM
SFI, TURBO, BUICK
3.8
231
Stroke: 3.400" (86.36 MM)

2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255674, 1257125, 1260877, 267, 877229
Casting Numbers:
Comments:
MFI, BUICK
GM
3.8
231
3.8
231
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.062 @ #2
Stroke: 3.400" (86.36 MM)

2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1255674, 1257125, 1260877, 267, 877229
Casting Numbers:
Comments:
MFI, BUICK, ROLLER CAM
GM
84-86
Cyl Bore:
85-86
86-87
Stroke: 3.400" (86.36 MM)

Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
Rods:
Rod Fillet:
2.4490-2.5000" (62.205-63.5 MM)
Main:
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
267
Casting Numbers:
Comments:
SEFI, BUICK 19" LONG, 1.096" REAR FLANGE CENTERING RING
GM
3.8
231
GM
3.8
231
GM
Stroke:
Rods:
3.8
3.400" (86.36 MM)
2.2487-2.2499" (57.117-57.147 MM)
231
1.063 @ #2
87-88
Stroke: 3.400" (86.36 MM)

Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
Rods:
Rod Fillet:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main Fillet:
Main:
Thrust Width:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1245413, 267, 502
Casting Numbers:
Comments:
MFI, BUICK, ROLLER CAM, NON BALANCE SHAFT ENGINE
Stroke: 3.4000" (86.36 MM)

2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4988-2.4998" (63.47-63.495 MM)
Main:
Main:
2.652-2.660" (67.360-67.564 MM)
Rear Seal Diameter:
1245413, 502
Casting Numbers:
Comments:
MFI, BUICK 3800, ROLLER CAM
3.800" (96.52 MM)

1/16 ROLLED (NM)
3.800" (96.52 MM)

.063" ROLLED (1.6 MM)
.078" ROLLED (1.981 MM)
1.063 @ #2
88
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.8000" (96.52 MM)

.063" ROLLED (1.6 MM)
.078" ROLLED (1.981 MM)
1.063 @ #2
Cyl Bore:
3.800" (96.52 MM)
88-91
Rod Width:
2.4988-2.4998" (63.47-63.495 MM)
Main:
3.228" (81.991 MM)
Main:
Rear Seal Diameter:
113, 1245113, 1245413, 25511229, 25530502, 4737, 502
Casting Numbers:
Comments:
MFI, BUICK 3800, ROLLER CAM
204
.866" (21.996 MM)
(cont.)

Make
Liter
CID
Vin
Model
Year
GM
6 Cylinders
3.8
GM
231
Stroke: 3.4000" (86.36 MM)

2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4988-2.4998" (63.47-63.495 MM)
Main:
Main:
Balance: External
3.228" (81.991 MM)
Rear Seal Diameter:
4737
Casting Numbers:
Comments:
GM
Engine Model
(cont.)
91-94
Cyl Bore:
3.8000" (96.52 MM)
Thrust Width:
1.062 @ #2
L27
MFI, BUICK 3800, ROLLER CAM *1995 .0008-.0022"
3.8
231
92-94
L67
3.7992" (96.5 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM) *
Main:
1.102 @ #2
Main:
Thrust Width:
3.228" (81.991 MM)
Rear Seal Diameter:
25534737, 4737, 737
Casting Numbers:
Comments:
MFI, 3800 SUPERCHARGED, L67, ROLLER CAM *1995 2.4988-2.4998 & **1995 .0008-.0022
GM
3.8
231
Stroke: 3.400" (86.36 MM)

2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4988-2.4998" (63.47-63.495 MM)
Main:
3.228" (81.991 MM)
Main:
Rear Seal Diameter:
170, 2170, 24502170
Casting Numbers:
Comments:
MFI/3800/L67 SERIES II ENGINE
GM
3.8
231
3.8
231
3.800" (96.52 MM)
Cyl Bore:
3.7992" (96.5 MM)
Thrust Width:
1.062-1.102" @ #2
Stroke: 3.400" (86.36 MM)

2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4988-2.4998" (63.47-63.495 MM)
Main:
Main:
Balance: External
3.228" (81.991 MM)
Rear Seal Diameter:
2170
Casting Numbers:
Comments:
MFI, 3800 L36, SERIES II
GM
95-01
Cyl Bore:
95-04
95-05
3.7992" (96.5 MM)

Stroke: 3.400" (86.36 MM)
Cyl Bore:
2.2487-2.2499" (57.117-57.147 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM) *
Main:
1.102 @ #2
Main:
Thrust Width:
3.228" (81.991 MM)
Rear Seal Diameter:
4737, 737
Casting Numbers:
Comments:
3800 SUPERCHARGED, W/BALANCE SHAFT L67, ROLLER CAM *1995-1998 2.4988-2.4998 & **1995-1998
.0008-.0022
GM
Stroke:
Rods:
3.9
235
3.938" (100.025 MM)

2.3110-2.3120" (58.699-58.725 MM)
49-62
Cyl Bore:
3.5625" (90.488 MM)
1.250" (31.75 MM)

Rod Width:
#1 2.6835-2.6845" (68.161-68.186 MM)
.078
Main 1:
Main Fillet:
#2 2.7145-2.7155" (68.948-68.974 MM)
1.013 @ #3
Main:
Main 2:
Thrust Width:
#3 2.7455-2.7465" (69.736-69.761 MM)
Main 3:
#4 2.7765-2.7775" (70.523-70.548 MM)
Main 4:
Balance: Internal
3.875" (98.425 MM)
Rear Seal Diameter:
3701488, 3701488A, 3701894, 3770327, 3835311, 3835501, 3835709, 839750
Casting Numbers:
Comments:
CHEVROLET
GM
3.9
Stroke: 4.1250" (104.775 MM)

2.1230-2.1240" (53.924-53.949 MM)
Rods:
2.4775-2.4785"
Main 1:
2.5400-2.5410"
Main:
Main 2:
2.6650-2.6660"
Main 3:
2.6850-2.6860"
Main 4:
Comments:
OLDSMOBILE AND CANADIAN
238
OLDSMOBILE
Cyl Bore:
205
37-48
3.5000" (88.900 MM)
L67
L36
L67

Make
Liter
CID
Vin
Model
Year
GM
GM
6 Cylinders
3.9
239
PONT
Stroke: 4.0000" (101.6 MM)

2.1237-2.1247" (53.942-53.967 MM)
Rods:
FRONT 2.4982-2.4992" (63.454-63.48 MM)
Main 1:
#2 2.5294-2.5304" (64.247-64.272 MM)
Main 2:
#3 2.5919-2.5929" (65.834-65.86 MM)
Main 3:
REAR 2.6232-2.6242" (66.629-66.655 MM)
Main 4:
TORPEDO 6, STREAMLINER 6, SILVER STREAK 6
Comments:
GM
4.1
4.1
4.1
250
4.1
250
250
4.1
250
GM
4.1
250
4.1
252
66-69
3.875" (98.425 MM)
Thrust Width:
1.012 @ #7
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.013 @ #7
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.013 @ #7
Cyl Bore:
3.8745-3.8775" (98.412-98.489 MM)
Thrust Width:
1.013 @ #7
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.013 @ #7
66-75
77-78
78-80
Stroke: 3.531" (89.687 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3876802, 460407
Casting Numbers:
Comments:
2BC, CHEVROLET, INTEGRAL HEAD
GM
FIREBIRD
Cyl Bore:
Stroke: 3.531" (89.687 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3876802, 460407, 887652N
Casting Numbers:
Comments:
2BC, CHEVROLET
49-55
3.8125" (96.838 MM)
Stroke: 3.531" (89.687 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3876802, 407N, 460407, 954
Casting Numbers:
Comments:
1BC, CHEVROLET
GM
1.3770"
OHC
Stroke: 3.531" (89.687 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3876802, 407N, 460407, 954
Casting Numbers:
Comments:
1BC, CHEVROLET
GM
Thrust Width:
TRUCK
Stroke: 3.531" (89.687 MM)

1.9990-2.000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.432-2.442" (61.772-62.026 MM)
Rear Seal Diameter:
3876802
Casting Numbers:
Comments:
OHC, PONTIAC, FIREBIRD, TEMPEST
GM
3.5625" (90.488 MM)
Cyl Bore:
(cont.)
41-54
Cyl Bore:
248
Stroke: 3.719" (94.427 MM)

2.3110-2.3120" (58.699-58.725 MM)
Rods:
FRONT 2.6835-2.6845" (68.161-68.186 MM)
Main 1:
#2 2.7145-2.7155" (68.948-68.974 MM)
Main:
Main 2:
#3 2.7455-2.7465" (69.736-69.761 MM)
Main 3:
REAR 2.7765-2.7775" (70.523-70.548 MM)
Main 4:
Comments:
TRUCK
GM
SILVER STREAK
Engine Model
81-85
80-81
Stroke: 3.400" (86.36 MM)

Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
Thrust Width:
1255624, 1255674, 1257125, 1260877, 229, 25511229
Casting Numbers:
Comments:
4BC, BUICK
206
3.965" (100.711 MM)
1.062 @ #2

Make
Liter
CID
Vin
Model
Year
GM
6 Cylinders
4.1
GM
252
Comments:
GM
(cont.)
82-84
Stroke: 3.400" (86.36 MM)

Cyl Bore:
2.2487-2.2495" (57.117-57.137 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
Thrust Width:
1255624, 1255674, 1257125, 1260877, 229, 25511229
Casting Numbers:
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Engine Model
3.965" (100.711 MM)
1.062 @ #2
4BC, BUICK
4.1
256
54-56
3.531" (89.687 MM)

1.9990-2.0000" (50.775-50.8 MM)
#1 2.2983-2.2993" (58.377-58.402 MM)
#2 2.7145-2.7155" (68.948-68.974 MM)
#3 2.7455-2.7465" (69.736-69.761 MM)
#4 2.7761-2.7771" (70.513-70.538 MM)
#5 2.6344-2.6354" (66.914-66.939 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.875" (98.425 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.0150 @ #7
2.4300" (61.722 MM)

Rear Seal Diameter:
1296057, 1307660, 2144958, 2191127, 2194570, 6107432
Casting Numbers:
Comments:
GMC TRUCK
GM
4.2
256
Stroke: 4.0157" (102.000 MM)

2.2319-2.2325" (56.691-56.707 MM)
Rods:
2.7567-2.7574" (70.020-70.038 MM)
Main:
Main:
209
Casting Numbers:
Comments:
DOHC, SFI, ENVOY, TRAILBLAZER
GM
4.2
TRAILBLAZER
3.6638-3.6644" (93.033-93.048 MM)
Thrust Width:
@ #5
261
54-62
Stroke: 3.938" (100.025 MM)

Cyl Bore:
2.3110-2.3120" (58.699-58.725 MM)
Rods:
Rod Fillet:
#1 2.6835-2.6845" (68.161-68.186 MM)
Main 1:
Main Fillet:
#2 2.7145-2.7155" (68.948-68.974 MM)
Main:
Main 2:
Thrust Width:
#3 2.7455-2.7465" (69.736-69.761 MM)
Main 3:
#4 2.7765-2.7775" (70.523-70.549 MM)
Main 4:
3.875" (98.425 MM)
Rear Seal Diameter:
3701486, 3701488, 3701488A, 3701894, 3770327, 6107432
Casting Numbers:
Comments:
CHEVROLET
GM
Stroke:
Rods:
4.3
260
3.585" (91.059 MM)

2.2490-2.2500" (57.125-57.15 MM)
2.9993-3.0003" (76.182-76.208 MM)

Main:
Main:
3.228" (81.991 MM)
Rear Seal Diameter:
610
Casting Numbers:
Comments:
DIESEL, FWD OLDSMOBILE
GM
4.3
260
Stroke: 3.585" (91.059 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.9993-3.0003" (76.182-76.208 MM)
Main:
Main:
3.228" (81.991 MM)
Rear Seal Diameter:
611
Casting Numbers:
Comments:
DIESEL, RWD OLDSMOBILE
GM
4.3
Stroke: 3.940" (100.076 MM)

2.3110-2.3120" (58.699-58.725 MM)
Rods:
#1 2.6835-2.6845" (68.161-68.186 MM)
Main 1:
#2 2.7145-2.7155" (68.948-68.974 MM)
Main:
Main 2:
#3 2.7455-2.7465" (69.736-69.761 MM)
Main 3:
#4 2.7765-2.7775" (70.523-70.549 MM)
Main 4:
3.875" (98.425 MM)
Rear Seal Diameter:
Comments:
OLD CHEVROLET
02-05
Cyl Bore:
3.750" (95.25 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.2520 @ #3
82-85
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

.078" ROLLED (1.981 MM)
.990-1.000" (25.146-25.4 MM)
.078" ROLLED (1.981 MM)
1.200 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

.078" ROLLED (1.981 MM)
.078" ROLLED (1.981 MM)
1.200 @ #3
Cyl Bore:
3.562" (90.475 MM)
82-85
261
59-62
207
LL8

Make
Liter
CID
Vin
Model
GM
GM
6 Cylinders
4.3
262
GM
Engine Model
(cont.)
85-86
Stroke: 3.484" (88.494 MM)

Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
Rods:
1 - 3 2.4983-2.4993" (63.457-63.482 MM)
Main 1:
4 2.4478-2.4488" (62.174-62.2 MM)
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
10055480, 10105865, 1174N, 14088640, 14088840
Casting Numbers:
Comments:
Year
4.0007-4.0017" (101.618-101.643 MM)
1.2010 @ #4
4BC, CHEVROLET * OIL CLEAR #4 .0011-.0041, TWO PIECE REAR SEAL
4.3
262
85-86
4.0007-4.0017" (101.618-101.643 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
1/16 ROLLED
Rods:
Rod Fillet:
1-3 2.4484-2.4493" (62.189-62.212 MM)
1/16 ROLLED
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.2 MM)
1.718 @ #4
Main:
Main 2:
Thrust Width:
2.430" (61.722 MM)
Rear Seal Diameter:
1174, 1174N
Casting Numbers:
Comments:
TBI, 90 V6, CHEVROLET, ROLLER CAM * 2 PC RMB SEAL INTERNAL AND 1 PC RMB SEAL EXTERNAL
**OIL CLR #4: .0011-.0041, C/W MAY APPEAR DIFFERENT
GM
4.3
262
86-97
LB4
4.0007-4.0017" (101.618-101.643 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
1/16 ROLLED
Rods:
Rod Fillet:
1-3 2.4484-2.4493" (62.189-62.212 MM)
1/16 ROLLED
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.2 MM)
1.718 @ #4
Main:
Main 2:
Thrust Width:
3.736 1 PIECE *
Rear Seal Diameter:
10053480, 10055480, 10105865, 1174, 1174N, 14088640, 14088840
Casting Numbers:
Comments:
TBI, 90 V6 ,CHEVROLET, ROLLER CAM, W- W OUT TURBO *2 PC REAR SEAL: 2.430, **OIL CLR #4:
.0011-.0041,C/W MAY APPEAR DIFFERENT *** 2 PC RMB SEAL INTERNAL AND 1 PC EXTERNAL
GM
4.3
262
90-91
LU4
4.0007-4.0017" (101.618-101.643 MM)

Stroke: 3.4800" (88.392 MM)
Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
.109-.141" (2.769-3.581 MM) **
Rods:
Rod Fillet:
1 2.4484-2.4493" (62.189-62.212 MM)
.109-.141" (2.769-3.581 MM) **
Main 1:
Main Fillet:
2.4484-2.4493" (62.189-62.212 MM)
1.7220 @ #4
Main:
Main 2:
Thrust Width:
2.4484-2.4493" (62.189-62.212 MM)
Main 3:
2.4479-2.4488" (62.177-62.2 MM)
Main 4:
Balance: External
3.7400-3.7410" (94.996-95.021 MM)
Rear Seal Diameter:
10055480, 10105865, 14088640, 14088840
Casting Numbers:
Comments:
TBI, CHEVROLET, ROLLER CAM * #1=.001-.0015,#5=.0025-.0035, EXT/BAL REAR
** & 1/16 ROLLED,
C/W'S MAY APPEAR DIFFERENT
GM
4.3
262
92-04
L35
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
1-3 2.4483-2.4493" (62.187-62.212 MM)
.078" (1.981 MM)
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.2 MM)
1.718 @ #4
Main:
Main 2:
Thrust Width:
Balance: External
3.736" (94.894 MM)
Rear Seal Diameter:
10055480, 10105865, 14086640, 14088640, 255
Casting Numbers:
Comments:
TBI,HO,BALANCE SHAFT,RWD,ROLLER CAM, CPI * OIL CLR #4 .0011-.0041, C/W MAY APPEAR DIFFERENT
GM
4.3
262
92-95
Stroke: 3.484" (88.494 MM)

Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
Rods:
Rod Fillet:
1-3 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
3.736" (94.894 MM)
Rear Seal Diameter:
10055480, 10105865, 14088640
Casting Numbers:
Comments:
TBI, HO, BALANCE SHAFT RWD, CHEVROLET * #4: .0011-.0041
GM
4.3
262
4.0007-4.0017" (101.618-101.643 MM)

5/64
5/64
1.718 @ #4
96-00
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
1-3 2.4483-2.4493" (62.187-62.212 MM)
.078" (1.981 MM)
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.2 MM)
1.718 @ #4
Main:
Main 2:
Thrust Width:
Balance: External
3.736" (94.894 MM)
Rear Seal Diameter:
10055480, 10105865, 14088640, 14088840
Casting Numbers:
Comments:
SFI, HO, BALANCE SHAFT, RWD, ROLLER CAM * OIL CLR #4 .0011-.0041, C/W MAY APPEAR DIFFERENT
208

Make
Liter
CID
Vin
Model
GM
Year
Engine Model
6 Cylinders
4.4
GM
270
(cont.)
45-62
3.781" (96.037 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3110-2.3120" (58.699-58.724 MM)
Rods:
#1 2.6835-2.6845" (68.160-68.186 MM)
Main 1:
#2 2.7145-2.7155" (68.948-68.973 MM)
1.445" (36.703 MM)
Main 2:
Thrust Width:
#3 2.7455-2.7465" (69.735-69.761MM)
Main 3:
#4 2.7765-2.7775" (70.523-70.548 MM)
Main 4:
2090911, 2135416, 2136119, 2192941, 2194012, 2342204, 2362229
Casting Numbers:
Comments:
GM
GMC GAS
4.8
292
63-73
3.875" (98.425 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
1.0150 @ #7
Main:
Thrust Width:
2.4300" (61.722 MM)
Rear Seal Diameter:
0363, 2774220, 2774220N, 329880N, 3299990, 3789412, 3855914, 3884653, 3886061, 3910363
Casting Numbers:
Comments:
1BC, CHEVROLET TRUCK
GM
4.8
292
74-77
3.875" (98.425 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
1.0150 @ #7
Main:
Thrust Width:
2.4300" (61.722 MM)
Rear Seal Diameter:
0363, 2774220, 2774220N, 329880N, 3299990, 3789412, 3855914, 3884653, 3886061, 3910363
Casting Numbers:
Comments:
1BC, CHEVROLET
GM
4.8
292
78-90
3.8745-3.8775" (98.412-98.489 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
5/64
Rods:
Rod Fillet:
2.2983-2.2993" (58.377-58.402 MM)
1/16
Main:
Main Fillet:
1.0150 @ #7
Main:
Thrust Width:
Balance: Internal
2.4300" (61.722 MM)
Rear Seal Diameter:
0363, 2774220, 2774220N, 329880N, 3299990, 3789412, 3855914, 3884653, 3886061, 3910363
Casting Numbers:
Comments:
1BC, CHEVROLET THRUST BRG LENGTH STD 1.009
GM
5.0
302
GMC
50-57
4.000" (101.6 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3110-2.3120" (58.699-58.725 MM)
Rods:
#1 2.6835-2.6845" (68.161-68.186 MM)
Main 1:
#2 2.7145-2.7155" (68.948-68.974 MM)
Main:
Main 2:
#3 2.7455-2.7465" (69.736-69.761 MM)
Main 3:
#4 2.7765-2.7775" (70.523-70.549 MM)
Main 4:
2090911, 2135416, 2136119, 2192941, 2194012, 2194958, 2342204, 2342624, 2344204, 2362229,
Casting Numbers:
2404929, 2491012, 31700332, 4326229, 883550
Comments:
GMC, H/D GAS 6 L
GM
5.0
305
60-75
4.250" (107.95 MM)

Stroke: 3.580" (90.932 MM)
Cyl Bore:
2.8112-2.8122" (71.404-71.43 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main:
1.534 @ #5
Main:
Thrust Width:
3.244" (82.397 MM)
Rear Seal Diameter:
2342204, 234224, 2342664, 2364417, 2454001, 2454191, 2454192, 2475493, 2475494, 2475795,
Casting Numbers:
2475796, 2566209, 2867417, 651828
Comments:
GMC TRUCK, ** V6 ** HEAVY DUTY GAS
GM
5.7
Stroke: 3.580" (90.932 MM)

2.8112-2.8122" (71.404-71.43 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main:
Main:
Comments:
V-6 GMC DIESEL
351
65
Cyl Bore:
4.563" (115.9 MM)
Thrust Width:
1.534" @ #3
209

Make
Liter
CID
Vin
Model
GM
Year
6 Cylinders
5.8
GM
351
65-72
4.563" (115.9 MM)

Stroke: 3.859" (98.019 MM)
Cyl Bore:
2.8107-2.8117" (71.392-71.417 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main:
1.534 @ #3
Main:
Thrust Width:
2366209, 2419583, 2454017, 2475793, 2475795, 2475796, 651828
Casting Numbers:
Comments:
GM
GMC
5.8
351
Stroke: 3.580" (90.932 MM)

2.8107-2.8117" (71.392-71.417 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main:
Main:
Comments:
V-6 GMC DIESEL
GM
5.9
6.2
6.6
7.1
7.8
401
GM
7.8
4.125" (104.775 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.3790 @ #4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.563" (90.5 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.5380 @ #3
Cyl Bore:
4.8750" (123.825 MM)
Thrust Width:
1.535 @ #3
Cyl Bore:
4.875" (123.825 MM)
Thrust Width:
1.535 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
5.125" (130.175 MM)

.156" (3.962 MM)
.094
1.5380 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
5.125" (130.175 MM)

.156" (3.962 MM)
.094
1.5380 @ #3
432
73-77
V6
70-73
478
65-77
Stroke: 3.860" (98.044 MM)

2.8107-2.8117" (71.392-71.417 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main 1:
3.1237-3.1247" (79.342-79.367 MM)
Main:
Main 2:
3.1237-3.1247" (79.342-79.367 MM)
Main 3:
3.1229-3.1239" (79.322-79.347 MM)
Main 4:
3.244" (82.397 MM)
Rear Seal Diameter:
2419583, 2454017
Casting Numbers:
Comments:
V-6 GMC DIESEL
Stroke: 3.860" (98.044 MM)

2.8107-2.8117" (71.392-71.417 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main 1:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main 2:
3.1230-3.1240" (79.324-79.35 MM)
Main 3:
3.1225-3.1235" (79.312-79.337 MM)
Main 4:
3.244" (82.397 MM)
Rear Seal Diameter:
2419583, 2454017, 672016
Casting Numbers:
Comments:
GAS, H/D TRUCK
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
73-76
Stroke: 3.859" (98.019 MM)

2.8112-2.8122" (71.404-71.43 MM)
Rods:
#1 3.1237-3.1247" (79.342-79.367 MM)
Main:
Main:
Comments:
H/D GAS
GM
1.534 @ #3
379
Stroke: 3.5800" (90.932 MM)

2.8107-2.8117" (71.392-71.417 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main:
Main:
2419583, 2454017
Casting Numbers:
Comments:
GMC TRUCK
GM
Thrust Width:
38-49
Stroke: 3.859" (98.019 MM)

2.8107-2.8117" (71.392-71.417 MM)
Rods:
3.1237-3.1247" (79.342-79.367 MM)
Main 1:
3.1237-3.1247" (79.342-79.367 MM)
Main:
Main 2:
3.1237-3.1247" (79.342-79.367 MM)
Main 3:
3.1229-3.1239" (79.322-79.347 MM)
Main 4:
2.835" (72.009 MM)
Rear Seal Diameter:
2419583, 6860, 6960, 696038, 96032
Casting Numbers:
Comments:
GAS, GMC TRUCK, CHEVROLET BUILT
GM
4.563" (115.9 MM)
361
Stroke: 4.500" (114.3 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
2191644, 2304987
Casting Numbers:
GM
65-72
Cyl Bore:
478
65-77
210
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
Year
GM
6 Cylinders
8.2
GM
503
GMC
Stroke: 5.1250"
2.624-2.625"
Rods:
2.999-3.000"
Main:
Main:
GAS, 503A, 503
Comments:
Cyl Bore:
50-58
8 Cylinders
3.5
GM
215
61-63
Stroke: 2.800" (71.12 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1193645
Casting Numbers:
Comments:
3.5
GM
3.7
GM
GM
223
GM
1.0625 @ #3
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.0625 @ #3
Cyl Bore:
3.188" (80.975 MM)
61-63
PONTI
35-36
@ REAR
Thrust Width:
3.8
232
36
3.500" (88.9 MM)

1.9987-1.9997" (50.767-50.792 MM)
FRONT 2.2455-2.2465" (57.036-57.061 MM)
#2 2.2767-2.2777" (57.828-57.854 MM)
#3 2.3080-2.3090" (58.623-58.649 MM)
#4 2.3393-2.3403" (59.418-59.444 MM)
REAR 2.3705-2.3715" (60.211-60.236 MM)
Cyl Bore:
3.250" (82.55 MM)
@ REAR
Thrust Width:
PONTIAC 8-36
4.0
244
Stroke: 3.308" (84.023 MM)

2.1235-2.1242" (53.937-53.955 MM)
Rods:
2.5330-2.5338" (64.338-64.359 MM)
Main:
Main:
3.780" (96.012 MM)
Rear Seal Diameter:
12554681, 3525774, 3544669
Casting Numbers:
Comments:
DOHC, AURORA CAST IRON CRANK
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Thrust Width:
PONTIAC 8-35
GM
Comments:
3.500" (88.9 MM)
215
3.500" (88.9 MM)

1.9987-1.9997" (50.767-50.792 MM)
FRONT 2.2455-2.2465" (57.036-57.061 MM)
#2 2.2767-2.2777" (57.828-57.854 MM)
#3 2.3080-2.3090" (58.623-58.649 MM)
#4 2.3393-2.3403" (59.418-59.444 MM)
REAR 2.3705-2.3715" (60.211-60.236 MM)
Comments:
Cyl Bore:
OLDSMOBILE, ALUM HEADS & BLOCK
Stroke: 2.800" (71.12 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
1193645
Casting Numbers:
Comments:
BUICK
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
(cont.)
4.6250"
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Engine Model
4.0
4.125" (104.775 MM)
1.9980-1.9990" (50.749-50.775 MM)
#1 2.3105-2.3115" (58.687-58.712 MM)
#2 2.3735-2.3745" (60.287-60.312 MM)
#3 2.4355-2.4365" (61.862-61.887 MM)
#4 2.4985-2.4995" (63.462-63.487 MM)
#5 2.5605-2.5615" (65.037-65.062 MM)
AURORA
95-01
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.425" (86.995 MM)

ROLLED
ROLLED
.996 @ #3
Cyl Bore:
3.0910-3.0934" (78.511-78.572 MM)
Thrust Width:
1.6260 @ #3
248
37-55
1296057, 1307660, 2144958, 2191127, 2194570, 6107342, 6107432

Casting Numbers:
Comments:
BUICK STRAIGHT 8
211
L47

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
4.1
GM
249
PONT
Stroke: 3.750" (95.25 MM)

1.9987-1.9997" (50.767-50.792 MM)
Rods:
FRONT 2.3732-2.3742" (60.279-60.305 MM)
Main 1:
#2 2.4044-2.4047" (61.072-61.079 MM)
Main 2:
#3 2.4357-2.4367" (61.867-61.892 MM)
Main 3:
#4 2.4669-2.4679" (62.659-62.685 MM)
Main 4:
REAR 2.4982-2.4992" (63.454-63.48 MM)
Main 5:
499587, 506232, 508455
Casting Numbers:
Comments:
GM
Engine Model
TORPEDO
Cyl Bore:
(cont.)
37-49
3.250" (82.55 MM)
PONTIAC, DE LUXE, TORPEDO, STREAMLINER TORPEDO CRANK # 508455 HAS 1/2" FLYWHEEL
MOUNTING BOLTS
4.1
252
ELDORADO
87
3.465" (88.011 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9269-1.9279" (48.943-48.969 MM)
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
2.6354-2.6364" (66.939-66.965 MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.296 @ #3
Main:
Thrust Width:
2.832" (71.933 MM)
Rear Seal Diameter:
1617590, 1628091, 162909, 1629091, 1629091, 1646737, 184873, 648455
Casting Numbers:
Comments:
TBI, HT-4100 CADILLAC, ELDORADO 2.010 SNOUT LENGTH, 3 & 6 BOLT REAR FLANGE
GM
4.1
252
82-86
3.4646" (88.001 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9269-1.9279" (48.943-48.969 MM)
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
2.6354-2.6364" (66.939-66.965 MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.296 @ #3
Main:
Thrust Width:
Balance: Internal
2.832" (71.933 MM)
Rear Seal Diameter:
1617590, 1628091, 162909, 1629091, 1646737, 1648455, 184873
Casting Numbers:
Comments:
DEFI, HT-4100 CADILLAC 2.010 SNOUT LENGTH, 3 & 6 BOLT REAR FLANGE
GM
4.1
252
87-88
3.465" (88.011 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9269-1.9279" (48.943-48.969 MM)
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
2.6354-2.6364" (66.939-66.965 MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.296 @ #3
Main:
Thrust Width:
2.832" (71.933 MM)
Rear Seal Diameter:
1617590, 1617590, 1628091, 162909, 1629091, 1629091, 1646737, 1646737, 187873, 648455
Casting Numbers:
Comments:
MFI, HT-4100 CADILLAC 2.010 SNOUT LENGTH, 3 & 6 BOLT REAR FLANGE
16MM THREAD, DAMPER
INSTALL TOOL J29774
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
4.2
257
37-48
3.875" (98.425 MM)

2.1230-2.1240" (53.924-53.95 MM)
#1 2.4775-2.4785" (62.929-62.954 MM)
#2 2.5400-2.5410" (64.516-64.541 MM)
#3 2.6025-2.6035" (66.104-66.129 MM)
#4 2.6650-2.6660" (67.691-67.716 MM)
#5 2.6850-2.6860" (68.199-68.224 MM)
Cyl Bore:
3.250" (82.55 MM)
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.199 @ #3
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.195 @ #3
409511, 410031, 412625, 416847, 556708

Casting Numbers:
Comments:
OLDSMOBILE
GM
4.3
260
Stroke: 3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
418882, 556607
Casting Numbers:
Comments:
2BC, OLDSMOBILE
GM
4.3
Stroke: 3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
398261, 418882, 556607
Casting Numbers:
Comments:
2BC, OLDSMOBILE
260
75-76
75-76
212

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
4.3
GM
Stroke:
Rods:
260
3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
#1 2.4988-2.4998" (63.47-63.495 MM)

Main 1:
#2-5 2.4985-2.4995" (63.462-63.487 MM)
Main 2:
393654, 398261, 418882, 556607
Casting Numbers:
Comments:
GM
77-81
Cyl Bore:
3.500" (88.9 MM)
Rod Width:
1.877-1.887" (47.676-47.93 MM)
Thrust Width:
1.195 @ #3
4.3
260
Cyl Bore:
3.500" (88.9 MM)
Thrust Width:
1.199 @ #3
4.3
262
77-82
75-76
Stroke: 3.109" (78.969 MM)

Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
Rods:
#1-4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
#5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
230376, 354431
Casting Numbers:
Comments:
2BC, CHEVROLET MONZA * #5 OIL CLEAR .0011-.0041
GM
4.3
262
4.3
263
4.3
264
GM
4.3
3.000" (76.2 MM)
2.0992-2.1000" (53.32-53.34 MM)
265
79-80
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.200 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.1875" (80.963 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.549
Cyl Bore:
3.6235-3.6265" (92.037-92.113 MM)
Thrust Width:
1.7660 @ #3
50-53
Stroke: 3.2000" (81.28 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
Main:
2.6560" (67.462 MM)
Rear Seal Diameter:
1342995D, 1342999
Casting Numbers:
Comments:
BUICK 40 SERIES, 263.3 CUBIC INCH
Stroke:
Rods:
1.722 @ #4
263
Stroke: 4.1250" (104.775 MM)

2.1250-2.1260" (53.975-54. MM)
Rods:
2.5625-2.5635" (65.088-65.113 MM)
Main:
Main:
1340600
Casting Numbers:
Comments:
BUICK, STRAIGHT 8
GM
3.671" (93.243 MM)
Stroke: 3.585" (91.059 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.9993-3.0003" (76.182-76.208 MM)
Main:
Main:
3.228" (81.991 MM)
Rear Seal Diameter:
558711
Casting Numbers:
Comments:
DIESEL, OLDSMOBILE
GM
(cont.)
2BC, OLDSMOBILE
Stroke: 3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
393654, 398261, 418882, 556607
Casting Numbers:
Comments:
2BC, OLDSMOBILE
GM
Engine Model
53-56
CAPRICE
Cyl Bore:
Rod Width:
1-4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
10168568
Casting Numbers:
Comments:
SEFI, CHEVROLET CAPRICE, ROLLER CAM *OIL CLR #5: .0017-.0032"
213
94-96
3.7355-3.7385" (94.882-94.958 MM)

1.902-1.905" (48.311-48.387 MM)
1.722 @ #5
L99

Make
Liter
CID
Vin
Model
GM
GM
Year
Engine Model
8 Cylinders
4.3
265
(1)
(cont.)
55-57
3.750" (95.25 MM)

Stroke: 3.000" (76.2 MM)
Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main 1:
2.2983-2.2993" (58.377-58.402 MM)
1.7240 @ #5
Main 2:
Thrust Width:
2.2983-2.2993" (58.377-58.402 MM)
Main 3:
2.2983-2.2993" (58.377-58.402 MM)
Main 4:
2.2978-2.2988" (58.364-58.39 MM)
Main 5:
3727449, 3727499, 3729449, 3735236, 3835236, 3835236TG, 3836236, 3836266, 3849847, 3876764,
Casting Numbers:
3876768
CHEVROLET #5 OIL CLEAR .0011-.0041
Comments:
GM
4.3
265
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
525887
Casting Numbers:
Comments:
2BC, PONTIAC
GM
4.4
267
GM
4.4
268
3.750" (95.25 MM)
Thrust Width:
1.200 @ #4
Cyl Bore:
3.5000" (88.9 MM)
Thrust Width:
1.722 @ #5
Cyl Bore:
3.375" (85.725 MM)
Stroke: 3.4840" (88.494 MM)

2.0992-2.1000" (53.32-53.34 MM)
Rods:
1-4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
306275, 306276, 310514, 3932442, 411567
Casting Numbers:
Comments:
2BC, CHEVROLET * OIL CLR #5: .0011-.0041
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
80-81
Cyl Bore:
79-82
PONT
3.750" (95.25 MM)

1.9987-1.9997" (50.767-50.792 MM)
1 2.3732-2.3742" (60.279-60.305 MM)
2 2.4044-2.4054" (61.072-61.097 MM)
3 2.4357-2.4367" (61.867-61.892 MM)
4 2.4669-2.4679" (62.659-62.984 MM) **
REAR 2.6232-2.6242" (66.629-66.655 MM)
50-53
513514
Casting Numbers:
Comments:
PONTIAC * 1935-42 = .0010-.0030" ** 1.9975-1.9985" 1935-49#5 = 2.4975-2.4985" *** .0005-.0015 1935-49 **
GM
4.5
272
88
3.622" (91.999 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9269-1.9279" (48.943-48.969 MM)
5/64 ROLLED
Rods:
Rod Fillet:
2.6354-2.6364" (66.939-66.965 MM)
5/64 ROLLED
Main:
Main Fillet:
1.289-1.292 @ #3
Main:
Thrust Width:
Balance: Internal
2.832" (71.933 MM)
Rear Seal Diameter:
1617590, 1629091, 1629091, 1646737, 1646737, 1648455
Casting Numbers:
Comments:
2TBI, CADILLAC, ROLLER CAMSHAFT * OIL CLEAR #2-5: .0016-.0020, SNOUT LENGTH 2.010,3 OR 6 BOLT
FLG
GM
4.5
272
88-89
3.622" (91.999 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9269-1.9279" (48.943-48.969 MM)
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
2.6354-2.6364" (66.939-66.965 MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.289-1.292 @ #3
Main:
Thrust Width:
2.832" (71.933 MM)
Rear Seal Diameter:
1617590, 1628091, 162909, 1629091, 1646737, 184873, 648455
Casting Numbers:
Comments:
MFI, FWD, CADILLAC, ROLLER CAMSHAFT * #2-5:.0016-.0020, SNOUT LENGTH 2.010, 6 BOLT FLG
GM
4.5
272
90
3.622" (91.999 MM)

Stroke: 3.307" (83.998 MM)
Cyl Bore:
1.9269-1.9279" (48.943-48.969 MM)
5/64 ROLLED
Rods:
Rod Fillet:
C 2.6354-2.6364" (66.939-66.965 MM)
5/64 ROLLED
Main:
Main Fillet:
1.289-1.292 @ #3
Main:
Thrust Width:
2.832" (71.933 MM)
Rear Seal Diameter:
1617590, 1628091, 162909, 1629091, 1646737, 184873, 648455
Casting Numbers:
Comments:
MFI, CADILLAC, ROLLER CAMSHAFT * OIL CLEAR #2-5: .0016-.0020, SNOUT LENGTH 2.101,3 OR 6 BOLT
FLG
214

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
4.6
GM
279
Stroke: 3.307" (83.998 MM)

2.1235-2.1242" (53.937-53.955 MM)
Rods:
2.5330-2.5338" (64.338-64.359 MM)
Main:
Main:
3.776" (95.91 MM)
Rear Seal Diameter:
3525774, 3544669
Casting Numbers:
Comments:
NORTHSTAR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
93-03
L37
3.6614" (93. MM)

ROLLED
ROLLED
.996 @ #3
DOHC, CADILLAC NORTHSTAR L37
4.6
GM
279
Stroke: 3.307" (83.998 MM)

2.1239-2.1245" (53.947-53.962 MM)
Rods:
2.5330-2.5338" (64.338-64.359 MM)
Main:
Main:
3.7748-3.7787" (95.879-95.978 MM)
Rear Seal Diameter:
12554681, 3525744, 3544669
Casting Numbers:
Comments:
DOHC, CADILLAC NORTHSTAR LD8
4.6
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Engine Model
NORTHSTAR
93-03
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.6614" (93. MM)

ROLLED
ROLLED
.9960" (25.298 MM) @ #3
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.7240 @ #5
283
LD8
56-67
3.000" (76.2 MM)

1.9990-2.0000" (50.775-50.8 MM)
2.2983-2.2993" (58.377-58.402 MM)
2.2983-2.2993" (58.377-58.402 MM)
2.2983-2.2993" (58.377-58.402 MM)
2.2983-2.2993" (58.377-58.402 MM)
2.2978-2.2988" (58.364-58.39 MM)
2.430-2.432" (61.722-61.772 MM)

3727449, 3727499, 3729449, 3729499, 3734627, 3735236, 3815822, 3835236, 3835236TG, 3836236,
3836266, 3849847, 3876764, 3876768
CHEVROLET
Rear Seal Diameter:

Casting Numbers:
Comments:
GM
4.7
287
CHIEFTAN
Stroke: 3.250" (82.55 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
#1 2.4990-2.4990" (63.475-63.475 MM)
Main:
Main:
518047, 521601, 526602
Casting Numbers:
Comments:
GMC/PONTIAC CHIEFTAN
GM
4.8
293
GM
4.9
300
GM
4.9
300
Thrust Width:
1.1410 @ #3
Cyl Bore:
3.7795-3.7802" (95.999-96.017 MM)
Thrust Width:
1.0290-1.0320
Cyl Bore:
3.750" (95.25 MM)
Thrust Width:
1.062 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.6230" (92.024 MM)

ROLLED
ROLLED
1.292-1.296 @#3
99-02
BUICK
Stroke: 3.400" (86.36 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.4990-2.5000" (63.475-63.5 MM)
Main:
Main:
1357899, 1378350
Casting Numbers:
Comments:
BUICK
Stroke: 3.6230" (92.024 MM)

1.9270-1.9280" (48.946-48.971 MM)
Rods:
2.6354-2.6364" (66.939-66.965 MM)
Main:
Main:
Balance: External
2.832" (71.933 MM)
Rear Seal Diameter:
1, 3520090
Casting Numbers:
Comments:
MFI, HT-4900, CADILLAC L26
3.750" (95.25 MM)
Stroke: 3.2680" (83.007 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.5580-2.5593" (64.973-65.006 MM)
Main:
Main:
Comments:
C & K TRUCKS,
55-55
Cyl Bore:
LR4
64-67
91-95
215
L26

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
4.9
GM
301
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
525887
Casting Numbers:
Comments:
GM
4.9
301
4.9
301
4.9
301
Thrust Width:
1.062 @ #4
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.062 @ #4
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.062 @ #4
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.032 @ #4
5.0
302
5.0
303
77-81
77-81
79-81
302
Stroke: 3.000" (76.2 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
#1 2.4484-2.4493" (62.189-62.212 MM)
Main:
Main:
Balance: Internal
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1178, 3279, 6764
Casting Numbers:
Comments:
CHEVROLET, Z-28 ENGINE 290 HP
GM
4.000" (101.6 MM)
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
525887
Casting Numbers:
Comments:
4BC, PONTIAC
GM
77-79
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
525887
Casting Numbers:
Comments:
4BC, TURBO, PONTIAC
GM
(cont.)
2BC, PONTIAC
Stroke: 3.000" (76.2 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
#1 2.2995-3.0005" (58.407-76.213 MM)
Main:
Main:
525887
Casting Numbers:
Comments:
PONTIAC
GM
Engine Model
Z-28
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
67-69
4.000" (101.6 MM)
.125" (3.175 MM)
.125" (3.175 MM)
1.742 @ #5
OLDS
49-53
3.7500" (95.25 MM)

Stroke: 3.4375" (87.3 MM)
Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
1-4 2.4980-2.4990" (63.449-63.475 MM)
Main 1:
5 2.6230-2.6240" (66.624-66.65 MM)
@5
Main:
Main 2:
Thrust Width:
555638, 555699, 561656, 565524, 565524DYNA, 567943
Casting Numbers:
Comments:
OLDSMOBILE 303.7 1949-1956 ALMOST THE SAME WATCH DAMPER AND FLYWHEEL BOLTS, FLYWHEEL
CENTERING RING
GM
5.0
304
303.7
Stroke: 3.437" (87.3 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
555638
Casting Numbers:
Comments:
OLDSMOBILE, FIRST OHV V-8
GM
5.0
49-53
Cyl Bore:
305
Stroke: 3.480" (88.400 MM)

2.0986-2.0998" (53.304-53.334 MM)
Rods:
1 2.4484-2.4493" (62.198-62.212 MM)
Main 1:
2,3,4 2.4481-2.4490" (62.182-62.205 MM)
Main:
Main 2:
5 2.4479-2.4488" (62.177-62.199 MM)
Main 3:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088535
Casting Numbers:
Comments:
TBI, CHEVROLET, CAMARO
3.750" (95.25 MM)
CAMARO
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
216
88-92
3.735-3.739" (94.870-94.960 MM)

.078-.109" (1.981-2.769 MM)
.078-.109" (1.981-2.769 MM)
1.722" @ #5
LO3

Make
Liter
CID
Vin
Model
GM
8 Cylinders
5.0
GM
305
Stroke: 3.484" (88.494 MM)

2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main 2:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3932442, 442
Casting Numbers:
Comments:
GM
3.736" (94.894 MM)
Thrust Width:
1.200 @ #5
(cont.)
2BC, CHEVROLET * #5: .0011-.0041
5.0
305
76-79
5.0
305
5.0
305
3.736" (94.894 MM)
1.722 @ #5
77-79
Stroke: 3.484" (88.494 MM)

Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
306275, 306276, 310514, 3932442, 411567, 442
Casting Numbers:
Comments:
2BC, CHEVROLET * #5: .0011-.0041
GM
Engine Model
76
Cyl Bore:
Stroke: 3.484" (88.494 MM)

Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
1-4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
306275, 306276, 31051, 310514, 3932442, 411567, 442
Casting Numbers:
Comments:
2BC, CHEVROLET * #5: .0011-.0041
GM
Year
3.7350-3.7385" (94.869-94.958 MM)
1.722 @ #5
78-88
3.7350-3.7385" (94.869-94.958 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
1.722 @ #5
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
14088526, 14088535, 14088835, 306275, 306276, 31051, 310514, 3932442, 411567, 442
Casting Numbers:
Comments:
4BC, CHEVROLET * #5: .0011-.0041
GM
5.0
305
80-81
Stroke: 3.484" (88.494 MM)

Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
306275, 306276, 31051, 310514, 3932442, 411567, 442
Casting Numbers:
Comments:
2BC, CHEVROLET * #5: .0011-.0041
GM
5.0
305
3.736" (94.894 MM)
1.722 @ #5
81-87
3.736" (94.894 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
1.722 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
14088526, 14088535, 306275, 306276, 310514, 376450, 3932442, 411567
Casting Numbers:
Comments:
4BC, CHEVROLET, ROLLER CAM 1987 * #5: .0011-.0041
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
5.0
305
3.480" (88.392 MM)

2.0990-2.1000" (53.315-53.34 MM)
2.4483-2.4493" (62.187-62.212 MM)
2.4483-2.4493" (62.187-62.212 MM)
2.4483-2.4493" (62.187-62.212 MM)
2.4483-2.4493" (62.187-62.212 MM)
2.4478-2.4488" (62.174-62.2 MM)
82
Cyl Bore:
3.736" (94.894 MM)
Thrust Width:
1.722 @ #5
2.430-2.432" (61.722-61.772 MM)

Rear Seal Diameter:
306275, 306276, 310514, 3932442, 411567
Casting Numbers:
Comments:
TBI, CHEVROLET
217
LG4

Make
Liter
CID
Vin
Model
GM
5.0
GM
GM
Engine Model
8 Cylinders
305
(cont.)
83
Stroke: 3.480" (88.392 MM)

Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.4483-2.4493" (62.187-62.212 MM)
Main 1:
2.4483-2.4493" (62.187-62.212 MM)
Main 2:
Thrust Width:
2.4483-2.4493" (62.187-62.212 MM)
Main 3:
2.4483-2.4493" (62.187-62.212 MM)
Main 4:
2.4478-2.4488" (62.174-62.2 MM)
Main 5:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
306275, 306276, 310514, 3932442, 411567, 442
Casting Numbers:
Comments:
Year
3.736" (94.894 MM)
1.722 @ #5
TBI, CHEVROLET
5.0
305
84-88
L69
3.736" (94.894 MM)

Stroke: 3.480" (88.392 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
.078-.109" (1.981-2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.078-.109" (1.981-2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.722 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.430-2.432" (61.722-61.772 MM) **
Rear Seal Diameter:
14088526, 14088535
Casting Numbers:
Comments:
L69, 4BC, CHEVROLET, HIGH OUTPUT * #5: .0011-.0041
**REAR SEAL DIAM 1986 AND UP=3.740-3.741
GM
5.0
305
Stroke: 3.484" (88.494 MM)

2.0986-2.0998" (53.304-53.335 MM)
Rods:
1-4 2.4484-2.4490" (62.189-62.205 MM)
Main 1:
5 2.4479-2.4488" (62.177-62.2 MM)
Main:
Main 2:
Balance: External
3.740-3.7410" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088535, 14088835
Casting Numbers:
Comments:
MPI, CHEVROLET, ROLLER CAM * #5: .0017-.0032
GM
5.0
305
5.0
305
5.0
307
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.736" (94.894 MM)

.078-.109" (1.981-2.769 MM)
.078-.109" (1.981-2.769 MM)
1.722 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.7355-3.7385" (94.882-94.958 MM)

.078-.109" (1.981-2.769 MM)
.079-.109" (1.981-2.769 MM)
1.722 @ #5
LB9
89-95
Stroke: 3.484" (88.494 MM)

2.0978-2.0998" (53.284-53.335 MM)
Rods:
1-4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088535
Casting Numbers:
Comments:
TBI, CHEVROLET * #5: .0010-.0027
GM
3.7350-3.7390" (94.869-94.971 MM)

.078-.109" (1.981-2.769 MM)
.078-.109" (1.981-2.769 MM)
1.722 @ #5
Stroke: 3.484" (88.494 MM)

2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088835
Casting Numbers:
Comments:
TBI, CHEVROLET * #5: .0011-.0041
GM
88-92
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
96-99
307
68-73
3.8750" (98.425 MM)

Stroke: 3.2500" (82.55 MM)
Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1-4 2.4483-2.4493" (62.187-62.212 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
Balance: Internal
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1130, 3911001, 3911001A, 3911011, 391101A, 3914681, 3930809, 3941172, 3941174, 4672
Casting Numbers:
Comments:
CHEVROLET, 3.875" BORE
218
L30

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
5.0
GM
307
Stroke: 3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
Rods:
#1 2.4994-2.4998" (63.485-63.495 MM)
Main 1:
#2-5 2.4990-2.4995" (63.475-63.487 MM)
Main 2:
Balance: Internal
2.6495-2.6500" (67.297-67.31 MM)
Rear Seal Diameter:
230376, 393654, 418882, 556607, 566607
Casting Numbers:
Comments:
GM
3.800" (96.52 MM)
Thrust Width:
1.200 @ #3
OLDSMOBILE, 4BC, FLAT TAPPET CAM * #5: .0014-.0044
5.0
307
5.2
316
87-90
Stroke: 3.2500" (82.55 MM)

2.2488-2.2498" (57.12-57.145 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
Main:
518047, 521601, 526602
Casting Numbers:
Comments:
316.6 CU" PONTIAC, 27 CHIEFTAIN, 28 STARCHIEF
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
(cont.)
81-88
Cyl Bore:
Stroke: 3.385" (85.979 MM)

Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
Thrust Width:
Balance: Internal
230376, 393654, 418882, 556607, 566607
Casting Numbers:
Comments:
OLDSMOBILE, 4BB CARB, ROLLER CAM *OIL CLR #5: .0014-.0044
GM
Engine Model
5.2
320
3.800" (96.52 MM)
1.200 @ #3
CHIEFTAIN
3.9375" (100.013 MM)
Cyl Bore:
3.4375" (87.313 MM)
Thrust Width:
1.4700
4.3120" (109.525 MM)

2.2480-2.2490" (57.099-57.125 MM)
#1 2.5605-2.5615" (65.037-65.062 MM)
#2 2.6235-2.6245" (66.637-66.662 MM)
#3 2.6855-2.6865" (68.212-68.237 MM)
#4 2.7485-2.7495" (69.812-69.837 MM)
#5 2.8105-2.8115" (71.387-71.412 MM)
56-56
Cyl Bore:
37-52
1228739, 1288739, 1289678, 1342999

Casting Numbers:
Comments:
BUICK STRAIGHT 8
GM
5.3
322
LA SALLE
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4590-2.4595" (57.125-57.15 MM)
Rods:
2.4990-2.4995" (63.449-63.475 MM)
Main:
Main:
Thrust Width:
1414343, 1424103, 1428901, 1428903, 1440476
Casting Numbers:
Comments:
MODELS 38-50 1938, 39-50 1939, 40-50-52 1940
GM
5.3
322
GM
5.3
324
GM
5.3
325
53-56
Cyl Bore:
3.9985-4.0015" (101.562-101.638 MM)
Thrust Width:
1.7660 @ #3
Cyl Bore:
3.8750" (98.425 MM)
Thrust Width:
1.1250 @ #3
Cyl Bore:
3.7795-3.7802" (95.999-96.017 MM)
Thrust Width:
1.0290-1.0320
Stroke: 3.4375" (87.3 MM)

2.2488-2.2498" (57.12-57.145 MM)
Rods:
1-4 2.4980-2.4990" (63.449-63.475 MM)
Main 1:
5 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main 2:
555638, 555699, 561656
Casting Numbers:
Comments:
OLDSMOBILE
Stroke: 3.6220" (91.999 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.5580-2.5593" (64.973-65.006 MM)
Main:
Main:
Comments:
C & K TRUCKS, LM7, CAST IRON BLOCK
1.3730-1.3790" (34.874-35.026 MM)
Stroke: 3.2000" (81.28 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
Main:
2.6560" (67.462 MM)
Rear Seal Diameter:
1342995D, 1342999
Casting Numbers:
Comments:
BUICK
38-40
3.3750" (85.725 MM)
54-56
99-05
219
LM7

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
5.3
GM
325
Stroke: 3.622" (92.000 MM)

2.0991-2.0999" (53.318-53.338 MM)
Rods:
2.5588-2.5593" (64.993-65.007 MM)
Main:
Main:
DOHC, ENVOY, BRAVADA, TRAILBLAZER, SSR
Comments:
5.3
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
326
TRUCK
(cont.)
03-05
Cyl Bore:
3.7795-3.7802" (96.000-96.018 MM)
Thrust Width:
1.029-1.032" (26.140-26.220 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.719" (94.463 MM)

7/64
7/64
1.1430 @ #4
3.750" (95.25 MM)

2.2487-2.2498" (57.117-57.145 MM)
2.9990-3.0000" (76.175-76.2 MM)
2.9990-3.0000" (76.175-76.2 MM)
2.9990-3.0000" (76.175-76.2 MM)
2.9990-3.0000" (76.175-76.2 MM)
2.2988-2.2998" (58.39-58.415 MM)
Engine Model
LM4
63-67
103427, 4813, 531369, 541585, 544191, 9773382, 9773383, 9773524, 9773573, 9782646, 9782770,
9783785, 9783786, 9793573, 9794054, 97954, 9795479
PONTIAC, 90 V8 OHV, ALSO HO 3.719" BORE
Casting Numbers:
Comments:
GM
5.4
327
62-67
Stroke: 3.2500" (82.55 MM)

Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM)
Rods:
Rod Fillet:
1-4 2.2983-2.2993" (58.377-58.402 MM)
Main 1:
Main Fillet:
5 2.2978-2.2988" (58.364-58.39 MM)
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
2680, 3782680, 3782690, 4577, 5782680
Casting Numbers:
Comments:
CHEVROLET, EARLY STYLE SMALL MAINS SMALL ROD JOURNALS
GM
Stroke:
Rods:
5.4
327
4.0000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.7240 @ #5
3.2500" (82.55 MM)

2.0990-2.1000" (53.315-53.34 MM)
68-69
Cyl Bore:
4.0000" (101.6 MM)
7/64
Rod Width:
1-4 2.4483-2.4493" (62.187-62.212 MM)
7/64
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
Balance: Internal
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1130, 3101001, 3911001, 3911001A, 3911011, 391101A, 3914681, 3930809, 3941172, 3941174, 4672
Casting Numbers:
Comments:
CHEVROLET, LATE STYLE LARGE MAINS LARGE ROD JOURNALS
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
5.4
330
.7
3.438" (87.325 MM)

2.4970-2.4980" (63.424-63.449 MM)
2.4980-2.4990" (63.449-63.475 MM)
2.4980-2.4990" (63.449-63.475 MM)
2.4980-2.4990" (63.449-63.475 MM)
2.4980-2.4990" (63.449-63.475 MM)
2.6230-2.6240" (66.624-66.65 MM)
49-53
Cyl Bore:
3.750" (95.25 MM)
Thrust Width:
@ #3
555699, 559432, 561656, 565524, 565524DYNA, 567943

Casting Numbers:
Comments:
OLDSMOBILE
GM
Stroke:
Rods:
5.4
330
3.3850" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
#1 2.4985-2.4995" (63.462-63.487 MM)

Main:
Main:
088
Casting Numbers:
Comments:
OLDSMOBILE
GM
5.4
331
64-67
Cyl Bore:
3.9375-3.9385" (100.013-100.038 MM)
Rod Width:
1.877-1.880" (47.676-47.752 MM)
Thrust Width:
1.193-1.195@ #3
CAD
49-55
Stroke: 3.6250" (92.075 MM)

Cyl Bore:
2.2488-2.2493" (57.12-57.132 MM)
Rods:
#1 2.4985-2.4990" (63.462-63.475 MM)
Main:
Main:
Thrust Width:
1455101, 1462473, 1463340, 1463473, 3509574
Casting Numbers:
Comments:
OHV, CADILLAC
220
3.8130" (96.85 MM)
1.1881 @ #5

Make
Liter
CID
Vin
Model
Year
GM
GM
Engine Model
8 Cylinders
5.5
336
(cont.)
57-59
3.7810" (96.037 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM) *
Main:
1.1400 @ #3
Main:
Thrust Width:
GMC TRUCKS PONTIAC ENGINE 336.9 OR 337 CUBIC INCH * 2.6230-2.6240" PRIOR-SERIAL NUMBER
Comments:
3365001
GM
5.6
340
64-67
Stroke: 3.850" (97.79 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
Thrust Width:
1235419, 1260718, 1261119, 1375809, 1378346
Casting Numbers:
Comments:
BUICK, IRON BLOCK
GM
5.6
347
5.7
346
1.062 @ #3
CHIEFTAIN
Stroke: 3.563" (90.5 MM)

Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
Rods:
#1 2.623-2.624" (66.624-66.65 MM)
Main:
Main:
Thrust Width:
2.6560" (67.462 MM)
Rear Seal Diameter:
523206, 528527, 530048
Casting Numbers:
Comments:
PONTIAC, 27 CHIEFTAIN, 28 STARCHIEF W/HYDRA TRANS
GM
3.750" (95.25 MM)
57-57
3.938" (100.025 MM)
1.0640
CAMARO
97-04
LS1
3.8970-3.8980" (98.984-99.009 MM)

Stroke: 3.6220" (91.999 MM) *
Cyl Bore:
2.0991-2.0999" (53.317-53.337 MM) *
Rods:
2.5588-2.5594" (64.994-65.009 MM) *
Main:
1.0290-1.0320" (26.136-26.212 MM) @ #3
Main:
Thrust Width:
Balance: Internal
12552216, 12555089
Casting Numbers:
Comments:
LS1, CORVETTE, CAMARO, FIREBIRD, ALUMINUM BLOCK * GM PILIOT BUSHING PART NUMBER #
14061685 O.D. 1.0940" BRONZE BUSHING WITH A STEEL NEEDLE BEARING ASSEMBLY INSIDE.
GM
5.7
346
CORVETTE
01-04
LS6
3.8970-3.8980" (99.000-99.018 MM)

Stroke: 3.6220" (92.000 MM)
Cyl Bore:
2.0991-2.0999" (53.318-53.338 MM)
Rods:
2.5580-2.5590" (64.993-65.007 MM)
Main:
1.029-1.032" (26.140-26.220 MM)
Main:
Thrust Width:
Comments:
LS6, GEN III, SFI, CORVETTE * GM PILIOT BUSHING PART NUMBER # 14061685 O.D. 1.0940" BRONZE
BUSHING WITH A STEEL NEEDLE BEARING ASSEMBLY INSIDE
GM
5.7
346
62
40-48
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4590-2.4595" (62.459-62.471 MM)
Rods:
2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
1414343, 1414346, 1424103, 1428901, 1428903, 1440476
Casting Numbers:
Comments:
L HEAD CADILLAC ENGINE
GM
5.7
3.500" (88.9 MM)
348
58-65
4.125" (104.775 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
1.815 @ #5
Main:
Thrust Width:
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3733223, 3733226, 3741640, 3741642, 3782692, 3824544, 3824553
Casting Numbers:
Comments:
CHEVROLET CAR & TRUCK
GM
5.7
350
Stroke: 3.480" (88.392 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.4483-2.4493" (62.187-62.212 MM)
Main:
Main:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088532, 14088535, 8532
Casting Numbers:
Comments:
LT1, FIREBIRD, CAMARO, SS IMPALA , CORVETTE
CAMARO
92-97
Cyl Bore:
4.000-4.002" (101.6-101.651 MM)
Thrust Width:
1.722 @ #5
221
LT1

Make
Liter
CID
Vin
Model
Year
GM
GM
8 Cylinders
5.7
350
Stroke: 3.484" (88.494 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
2-4 2.4481-2.4490" (62.182-62.205 MM)
Main 2:
5 2.4479-2.4488" (62.177-62.2 MM)
Main 3:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088532, 14088535
Casting Numbers:
Comments:
GM
5.7
350
5.7
350
Thrust Width:
5.7
350
5.7
350
89-95
CORVETTE
96-96
4.000-4.002" (101.6-101.651 MM)
Thrust Width:
1.722 @ #5
68-74
3.800" (96.52 MM)
1.0640" @ #4
68-75
5.7
350
68-77
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
Thrust Width:
4813, 496452, 9773524, 9782646, 9782770, 9793573, 97954
Casting Numbers:
Comments:
PONTIAC
GM
5.7
350
GM
5.7
350
3.875" (98.425 MM)
1.141 @ #4
69-76
Stroke: 3.385" (85.979 MM)

Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
Thrust Width:
230376, 390275, 393654, 398261, 418882, 556607
Casting Numbers:
Comments:
OLDSMOBILE
4.0570" (103.048 MM)
1.2000 @ #3
Stroke: 3.750" (95.25 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
306276, 310514, 3932442, 496452, 9793573
Casting Numbers:
Comments:
4BC, PONTIAC 2.75" CENTER RING
70-75
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.141" @ #4
222
LT5, ZR1
@ #3
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1182, 2690, 306275, 306276, 310514, 3732444, 3832442, 3932442, 411567
Casting Numbers:
Comments:
4BC, CHEVROLET TRUCK * #5: .0011-.0041
GM
L98
3.8971-3.8981" (98.984-99.009 MM)
Cyl Bore:
Stroke: 3.850" (97.79 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
Thrust Width:
Balance: Internal
1235419, 1260718, 1261119, 1375809, 1398346
Casting Numbers:
Comments:
2BC, BUICK
GM
85-92
4.000-4.002" (101.6-101.651 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.7240" @ #5
CORVETTE
Cyl Bore:
Stroke: 3.480" (88.392 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.4483-2.4493" (62.187-62.212 MM)
Main:
Main:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088535
Casting Numbers:
Comments:
LT4, MFI, CHEVROLET, CORVETTE
GM
(cont.)
L98, TUNED PORT INJECTION * #2-4: .0010-.0025, #5: .0025-.0035
Stroke: 3.661" (92.989 MM)

2.0993-2.1000" (53.322-53.34 MM)
Rods:
2.7550-2.7560" (69.977-70.002 MM)
Main:
Main:
Comments:
DOHC, ZR1, LT5, MFI, YAMAHA ENGINE
GM
CAMARO, CORVE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
LT4

Make
Liter
CID
Vin
Model
GM
8 Cylinders
5.7
GM
350
73-77
Stroke: 3.850" (97.79 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
2.6560" (67.462 MM)
Rear Seal Diameter:
1235419, 1375809, 1375809, 1398346
Casting Numbers:
Comments:
GM
Year
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.0640" @ #3
2BC, BUICK
5.7
350
74
1235419, 1260718, 1261119, 1375809, 1378346

Casting Numbers:
Comments:
4BC, BUICK
GM
5.7
350
Stroke: 3.750" (95.25 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
4568749, 496452, 9793573
Casting Numbers:
Comments:
4BC, PONTIAC
GM
5.7
350
74
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.141 @ #4
74-76
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1182, 2690, 306275, 306276, 310514, 3732444, 3832442, 3932442, 411567
Casting Numbers:
Comments:
2BC, CHEVROLET * #5: .0011-.0041
GM
5.7
350
75-77
Stroke: 3.850" (97.79 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
Thrust Width:
2.6560" (67.462 MM)
Rear Seal Diameter:
1235419, 1260718, 1261119, 1375809, 1378346
Casting Numbers:
Comments:
4BC, BUICK
GM
5.7
350
5.7
350
76
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
5.7
350
4.000" (101.6 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.7240 @ #5
77-80
Stroke: 3.385" (85.979 MM)

Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
Rods:
#1 2.4988-2.4998" (63.47-63.495 MM)
Main 1:
#2-5 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main 2:
Thrust Width:
230376, 390275, 393654, 398261, 418882, 556607
Casting Numbers:
Comments:
4BC, OLDSMOBILE
GM
1.0640" @ #3
Stroke: 3.484" (88.494 MM)

2.0992-2.1000" (53.32-53.34 MM)
Rods:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
306276, 310514, 3932442, 442
Casting Numbers:
Comments:
4BC, CHEVROLET * #5: .0011-.0041
GM
3.800" (96.52 MM)
4.057" (103.048 MM)
1.2000 @ #3
77-80
Stroke: 3.850" (97.79 MM)

Cyl Bore:
1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
Thrust Width:
2.6560" (67.462 MM)
Rear Seal Diameter:
1235419, 1260718, 1261119, 1375809, 1378346
Casting Numbers:
Comments:
4BC, BUICK
223
3.800" (96.52 MM)
1.0640 @ #3
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
GM
Year
8 Cylinders
5.7
GM
350
Engine Model
(cont.)
77-82
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
7/64
Rods:
Rod Fillet:
1-4 2.4483-2.4493" (62.187-62.212 MM)
7/64
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1182, 2690, 306275, 306276, 310514, 3732444, 3832442, 3912335, 3932442, 3932444, 3941184, 411567
Casting Numbers:
Comments:
GM
4BC, CHEVROLET * #5: .0011-.0041
5.7
350
78-79
4.0000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1182, 2690, 306275, 306276, 310514, 3732444, 3832442, 3912335, 3932442, 3932444, 3941184, 411567
Casting Numbers:
Comments:
CHEVY, 4BC * #5: .0011-.0041
GM
5.7
350
78-79
Stroke: 3.385" (85.979 MM)

Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
Thrust Width:
230376, 390275, 393654, 398261, 418882, 556607
Casting Numbers:
Comments:
OLDSMOBILE, FWD, OHV
GM
Stroke:
Rods:
5.7
350
GM
5.7
350
78-79
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

.109-.141" (2.769-3.581 MM)
1.877-1.887" (47.676-47.93 MM)
.109-.141" (2.769-3.581 MM0
1.199-1.202 @#3
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

7/64-9/64
1.877-1.887" (47.676-47.93 MM)
7/64-9/64
1.199-1.202 @#3
3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
78-80
2.9993-3.0003" (76.182-76.208 MM)

Main:
Main:
Balance: Internal
2.6490-2.6510" (67.285-67.335 MM)
Rear Seal Diameter:
558711
Casting Numbers:
Comments:
DIESEL, OLDSMOBILE, 4 STD PISTONS * #5:.0016-.0049
GM
5.7
350
1.200" @ #3
3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
2.9993-3.0003" (76.182-76.208 MM)

Main:
Main:
2.650" (67.31 MM)
Rear Seal Diameter:
558711
Casting Numbers:
Comments:
DIESEL, OLDSMOBILE, ROLLER CAM * #5:.0016-.0049
Stroke:
Rods:
4.057" (103.048 MM)
79-88
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
.109-.141" (2.769-3.581 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.109-.141" (2.769-3.581 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.722 @ #5
Main:
Main 2:
Thrust Width:
3.740-3.741**" (94.996-95.021 MM)
Rear Seal Diameter:
1182, 14088526, 14088532, 14088535, 2690, 306275, 306276, 310514, 3892671, 3932442, 411567
Casting Numbers:
Comments:
4BC, CHEVROLET * #5: .0011-.0041, PRE 86 = 2.430-2.432" (61.722-61.772 MM)
GM
5.7
350
80
Stroke: 3.385" (85.979 MM)

Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
Thrust Width:
230376, 390275, 393654, 398261, 418882, 556607
Casting Numbers:
Comments:
EFI, OLDSMOBILE
224
4.057" (103.048 MM)
1.200" @ #3

Make
Liter
CID
Vin
Model
GM
GM
Year
Engine Model
8 Cylinders
5.7
350
Stroke: 3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.9993-3.0003" (76.182-76.208 MM)
Main:
Main:
2.650" (67.31 MM)
Rear Seal Diameter:
558711
Casting Numbers:
80
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.199-1.202 @#3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.057" (103.048 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.199-1.202 @ #3
Stroke: 3.484" (88.494 MM)

Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
1182, 2690, 306275, 306276, 310514, 3932442, 411567
Casting Numbers:
Comments:
2BC, CHEVROLET * 5: .0011-.0041
4.000" (101.6 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.722 @ #5
Comments:
GM
5.7
350
Stroke: 3.385" (85.979 MM)

2.1238-2.1248" (53.945-53.97 MM)
Rods:
2.9993-3.0003" (76.182-76.208 MM)
Main:
Main:
2.650" (67.31 MM)
Rear Seal Diameter:
558711
Casting Numbers:
Comments:
GM
GM
(cont.)
5.7
5.7
350
350
80-81
80-83
80-88
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
2.430-2.432" ** (61.722-61.773 MM)
Rear Seal Diameter:
1182, 14088526, 14088532, 14088535, 2690, 306275, 306276, 310514, 3832442, 3932442, 3941182,
Casting Numbers:
411567
Comments:
4BC, H/D CHEVROLET TWO PC SEAL THRU 1985 ** REAR SEAL DIAM 1986 AND UP=3.740-3.741
GM
5.7
350
81-85
Stroke: 3.385" (85.979 MM)

Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
Rods:
Rod Fillet:
2.9993-3.0003" (76.182-76.208 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
2.6490-2.6510" (67.285-67.335 MM)
Rear Seal Diameter:
558711
Casting Numbers:
Comments:
DIESEL, OLDSMOBILE, 4 STD PISTONS * #5:.0016-.0049
GM
5.7
350
4.057" (103.048 MM)

7/64-9/64
7/64-9/64
1.199-1.202 @#3
83-86
4.000" (101.6 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.4483-2.4493" (62.187-62.212 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.7240 @ #5
Main:
Main 2:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3732444, 3832442, 3912335, 3932442, 3932444, 3941184, 4568749, 9793573
Casting Numbers:
Comments:
4BC, CHEVROLET * #5: .0011-.0041
GM
5.7
350
86-96
3.9995-4.0025" (101.587-101.664 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.0992-2.1000" (53.32-53.34 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
1 - 4 2.4484-2.4493" (62.189-62.212 MM)
.094-.140
Main 1:
Main Fillet:
5 2.4478-2.4488" (62.174-62.2 MM)
1.722" @ #5
Main:
Main 2:
Thrust Width:
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088526, 14088532, 14088535
Casting Numbers:
Comments:
TBI, CHEVROLET, 1 PC REAR MAIN SEAL * ENGINE BALANCE: INTERNAL FRONT & EXTERNAL REAR
225

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
5.7
GM
350
Stroke: 3.484" (88.494 MM)

2.0992-2.1000" (53.32-53.34 MM)
Rods:
1-4 2.4483-2.4493" (62.187-62.212 MM)
Main 1:
5 2.4478-2.4488" (62.174-62.2 MM)
Main 2:
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088532, 14088535
Casting Numbers:
Comments:
GM
Stroke:
Rods:
(cont.)
89-92
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

7/64-9/64
7/64-9/64
1.722" @ #5
Cyl Bore:
4.0000-4.0020" (101.6-101.651 MM)
Rod Width:
1.902-1.905" (48.311-48.387 MM)
Thrust Width:
1.722" @ #5
TBI, CHEVROLET * #5: .0011-.0041
5.7
350
3.480" (88.392 MM)

2.0992-2.1000" (53.32-53.34 MM)
2.4483-2.4493" (62.187-62.212 MM)

Main:
Main:
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088532, 14088535
Casting Numbers:
Comments:
TBI, CHEVROLET POLICE ENGINE, 4BBL IN 89
GM
Engine Model
5.7
350
89-95
96-02
LL0
L31
4.0007-4.0017" (101.618-101.643 MM)

Stroke: 3.480" (88.392 MM)
Cyl Bore:
2.0986-2.0998" (53.304-53.335 MM)
Rods:
#1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
#2-4 2.4481-2.4491" (62.182-62.207 MM)
1.722 @ #5
Main:
Main 2:
Thrust Width:
#5 2.4479-2.4491" (62.177-62.207 MM)
Main 3:
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
14088526, 14088532
Casting Numbers:
Comments:
TBI, SFI 2001, VORTEC IRON HEAD, CHEVROLET TRUCK * #1 = .0007-.0021", #5 = .0010-.0027"
GM
5.7
350
ZZZ ENGINE 350
Stroke: 3.480" (88.392 MM)

2.0978-2.0998" (53.284-53.335 MM)
Rods:
1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
2-4 2.4481-2.4490" (62.182-62.205 MM)
Main:
Main 2:
5 2.4479-2.4488" (62.178-62.200 MM)
Main 3:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
Comments:
HO 350, ZZZ, ZZ1, ZZ2, ZZ3, ZZ4
GM
6.0
364
Cyl Bore:
Stroke: 3.622" (92.000 MM)

2.0991-2.0999" (53.318-53.338 MM)
Rods:
2.5587-2.5594" (64.992-65.008 MM)
Main:
Main:
Comments:
CORVETTE, PONTIAC GTO, CHEVY SSR, GEN IV
GM
6.0
364
GM
6.0
364
GM
6.0
CORVETTE
364
LS2
Thrust Width:
1.029-1.032" (26.140-26.220 MM)
ESCALADE
02-03
LQ9
Cyl Bore:
4.0007-4.0014" (101.618-101.636 MM)
Thrust Width:
1.0290-1.0320"
Cyl Bore:
4.1250" (104.775 MM)
57-61
Thrust Width:
Stroke: 3.6220" (91.999 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.5580-2.5593" (64.973-65.006 MM)
Main:
Main:
Comments:
C & K TRUCKS, ALUMINUM HEAD IN 2001
05-05
4.0007-4.0014" (101.618-101.636 MM)
Stroke: 3.4000" (86.36 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
Main:
1173217, 1173341, 1186538
Casting Numbers:
Comments:
BUICK
ZZ 350
Cyl Bore:
Stroke: 3.6220" (91.999 MM)

2.0990-2.1000" (53.315-53.340 MM)
Rods:
2.5580-2.5593" (64.973-65.006 MM)
Main:
Main:
Comments:
SFI, OHV, GEN III, ALUMINUM HEAD
89-06
4.0007-4.0017" (101.618-101.643 MM)
@ #5
99-04
LQ4
Cyl Bore:
4.0007-4.0014" (101.618-101.636 MM)
Thrust Width:
1.0290-1.0320
226

Make
Liter
CID
Vin
Model
GM
8 Cylinders
6.0
GM
365
GM
(cont.)
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.879 @ #3
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.879 @ #3
CADILLAC
6.0
365
58-62
Stroke: 3.625" (92.075 MM)

2.2488-2.2493" (57.12-57.132 MM)
Rods:
2.6235-2.6240" (66.637-66.65 MM)
Main:
Main:
2.754-2.757" (69.951-70.027 MM)
Rear Seal Diameter:
1463348
Casting Numbers:
Comments:
CADILLAC
GM
Engine Model
56-58
Stroke: 3.625" (92.075 MM)

2.2488-2.2493" (57.12-57.132 MM)
Rods:
2.6235-2.6240" (66.637-66.65 MM)
Main:
Main:
2.754-2.757" (69.951-70.027 MM)
Rear Seal Diameter:
1463340
Casting Numbers:
Comments:
Year
6.0
366
68-90
3.938" (100.025 MM)

Stroke: 3.7600" (95.504 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
2.7482-2.7489" (69.804-69.822 MM)
.109" (2.769 MM)
Main:
Main Fillet:
1.8170 @ #5
Main:
Thrust Width:
Balance: Internal
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 3804816, 3856223, 3863144, 3874874, 3882842, 3882847, 3882848, 3882849, 3887114, 3904815,
Casting Numbers:
3904816, 3942411, 6223, 7115, 9115
Comments:
CHEVROLET TRUCK *#5 .0025-.0040
GM
6.0
366
89-90
3.9375-3.9382" (100.013-100.03 MM)

Stroke: 3.7600" (95.504 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
2.7482-2.7489" (69.804-69.822 MM)
.109" (2.769 MM)
Main:
Main Fillet:
1.8170 @ #5
Main:
Thrust Width:
2.6300" (66.802 MM)
Rear Seal Diameter:
144, 3804816, 3856223, 3863144, 3874874, 3904815, 6223, 7115, 815, 816, 874
Casting Numbers:
Comments:
CHEVROLET TRUCK/GMC LSO * #5 .0025-.0040
GM
6.0
366
Stroke: 3.7600" (95.504 MM)

2.1990-2.2000" (55.855-55.88 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
Balance: Internal
4.3320" (110.032 MM)
Rear Seal Diameter:
10114187, 10114189
Casting Numbers:
Comments:
GEN V, ENGINE *#5 .0025-.0040
GM
6.0
368
GM
6.0
368
3.9375-3.9382" (100.013-100.03 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.8170 @ #5
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.263 @ #3
Cyl Bore:
3.800" (96.52 MM)
Thrust Width:
1.263 @ #3
Stroke: 4.060" (103.124 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
3.470" (88.138 MM)
Rear Seal Diameter:
1609142
Casting Numbers:
Comments:
4BC, CADILLAC
Stroke: 4.060" (103.124 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
3.470" (88.138 MM)
Rear Seal Diameter:
1609142
Casting Numbers:
Comments:
DEFI, CADILLAC
91-98
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
80-84
80-84
227

Make
Liter
CID
Vin
Model
GM
GM
Year
8 Cylinders
6.1
370
370
Engine Model
(cont.)
57-58
4.0625" (103.188 MM)

Stroke: 3.5625" (90.488 MM)
Cyl Bore:
2.4988-2.4998" (63.47-63.495 MM) *
Rods:
2.9990-3.0000" (76.175-76.2 MM) *
Main:
1.879 @ #3
Main:
Thrust Width:
477440, 528527, 530048, 562746, 565699, 568812, 574440, 574544
Casting Numbers:
Comments:
GM
PONTIAC * 1957-58: MAIN=2.748-2.749 ROD=2.2488-2.2498
6.1
371
57-60
4.0000" (101.6 MM)

Stroke: 3.6875" (93.675 MM)
Cyl Bore:
2.4988-2.4998" (63.47-63.495 MM) * SEE COMMEN
Rods:
2.9990-3.0000" (76.175-76.2 MM) * SEE COMMENT B
Main:
1.879 @ #3
Main:
Thrust Width:
0, 477440, 528527, 530048, 562746, 565699, 574440, 574544
Casting Numbers:
Comments:
OLDSMOBILE, SAME AS SMALL BORE 394 * 1957 STARTS EXT BALANCE, 1957-58: MAIN 2.748-2.749",
ROD 2.2488-2.2498"
GM
6.2
379
Stroke: 3.819" (97.003 MM)

2.3982-2.3992" (60.914-60.94 MM)
Rods:
1 - 4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9493-2.9503" (74.912-74.938 MM)
Main:
Main 2:
Balance: External
2.8350" (72.009 MM)
Rear Seal Diameter:
14024236
Casting Numbers:
Comments:
CHEVROLET, DIESEL LIGHT DUTY * #5: .0018-.0047
GM
6.2
379
6.2
379
6.2
379
6.4
389
1.135 @ #3
Cyl Bore:
3.980" (101.092 MM)
Thrust Width:
1.135 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.9759-3.9789" (100.988-101.064 MM)

.109-.125" ROLLED (2.769-3.175 MM)
.078-.093" ROLLED
1.135 @ #3
82-86
87-93
** .109-.125" *** .078-.093"
Stroke: 3.819" (97.003 MM)

2.3982-2.3992" (60.914-60.94 MM)
Rods:
1 - 4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9493-2.9503" (74.912-74.938 MM)
Main:
Main 2:
Balance: External
2.8350" (72.009 MM)
Rear Seal Diameter:
14024236, 23500245, 23502592
Casting Numbers:
Comments:
DIESEL, CHEVROLET * #5 = .0018-.0047"
GM
Thrust Width:
Stroke: 3.819" (97.003 MM)

2.3982-2.3992" (60.914-60.94 MM)
Rods:
1-4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9493-2.9503" (74.912-74.938 MM)
Main:
Main 2:
Balance: External
2.8350" (72.009 MM)
Rear Seal Diameter:
14024236, 23500245, 23502592
Casting Numbers:
Comments:
CHEVROLET, DIESEL, LIGHT DUTY * #5: .0018-.0047"
GM
3.980" (101.092 MM)
Stroke: 3.819" (97.003 MM)

2.3982-2.3992" (60.914-60.94 MM)
Rods:
1 - 4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9493-2.9503" (74.912-74.938 MM)
Main:
Main 2:
Balance: External
2.8350" (72.009 MM)
Rear Seal Diameter:
14024236
Casting Numbers:
Comments:
DIESEL, CHEVROLET * #5: .0018-.0047
GM
82-86
Cyl Bore:
87-93
Cyl Bore:
3.9759-3.9789" (100.988-101.064 MM)
Thrust Width:
1.135 @ #3
389
59-66
4.0625" (103.188 MM)

Stroke: 3.7500" (95.25 MM) * SEE COMMENTS BOX
Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.139 @ #4
Main:
Thrust Width:
3.1490"
Rear Seal Diameter:
531369, 544191, 9773382, 9773383, 9782770, 9782786, 9783785, 9783786
Casting Numbers:
Comments:
PONTIAC * EARLY CRANKSHAFTS1959-62 USE A FLYWHEEL CENTERING RING 2.490" AND THE LATE
1964-66 CRANKSHAFTS USE A FLYWHEEL CENTERING RING 2.750"
228

Make
Liter
CID
Vin
Model
GM
Year
8 Cylinders
6.4
GM
390
(cont.)
59-62
Stroke: 3.875" (98.425 MM)

2.2488-2.2493" (57.12-57.132 MM)
Rods:
ALL 2.6235-2.6240" (66.637-66.65 MM)
Main:
Main:
2.754-2.757" (69.951-70.027 MM)
Rear Seal Diameter:
1467925, 1469263, 1469265
Casting Numbers:
Comments:
Engine Model
Cyl Bore:
4.000" (101.6 MM)
Thrust Width:
1.8881
Cyl Bore:
4.0000" (101.6 MM)
Thrust Width:
1.137-1.140 @#5
CADILLAC
6.4
GM
390
63
Stroke: 3.8750" (98.425 MM)

2.2488-2.2493" (57.12-57.132 MM)
Rods:
ALL 2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
2.754-2.757" (69.951-70.027 MM)
Rear Seal Diameter:
1467292, 1477634
Casting Numbers:
Comments:
CADILLAC
6.5
GM
394
OLDS
59-64
4.1250" (104.775 MM)

Stroke: 3.6875" (93.675 MM)
Cyl Bore:
2.4988-2.4998" (63.47-63.495 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.879 @ #3
Main:
Thrust Width:
0, 477440, 528527, 530048, 562746, 565699, 574440, 574544, 577440, 582740, 582746
Casting Numbers:
Comments:
OLDSMOBILE GAS 455 CRANKSHAFT FITS 394 BLOCK WITH +.125" OVERBORE 490 CU"
6.5
GM
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
396
65-72
3.7600" (95.504 MM)

2.1990-2.2000" (55.855-55.88 MM)
2.7485-2.7495" (69.812-69.837 MM)
2.7485-2.7495" (69.812-69.837 MM)
2.7485-2.7495" (69.812-69.837 MM)
2.7485-2.7495" (69.812-69.837 MM)
2.7478-2.7488" (69.794-69.82 MM)
Cyl Bore:
4.094" (103.988 MM) *
Thrust Width:
1.8170 @ #5
Balance: Internal
Rear Seal Diameter:
Casting Numbers:
Comments:
GM
2.6300-2.6320" (66.802-66.854 MM)

3521, 3804816, 3863144, 3874874, 3882842, 3882847, 3882848, 3882849, 3887114, 3904815, 6223,
7115, 9115
GEN IV, BIG BLOCK CHEVY * BORE FOR 402 CID=4.125" (104.775 MM)
6.5
397
Stroke: 3.8189" (97. MM)

2.3982-2.3992" (60.914-60.94 MM)
Rods:
1-4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9494-2.9503" (74.915-74.938 MM)
Main:
Main 2:
2.330" (59.182MM)
4.520" (114.808 MM)
Rear Seal Diameter:
23500245, 23502592
Casting Numbers:
Comments:
DIESEL, CHEVROLET, TURBO * #5: .0018-.0047
GM
6.5
397
92-00
Cyl Bore:
4.0541-4.0551" (102.974-103. MM)
Thrust Width:
1.135 @ #3
94-00
Stroke: 3.8189" (97. MM)

Cyl Bore:
2.3982-2.3992" (60.914-60.94 MM)
Rods:
1-4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9494-2.9503" (74.915-74.938 MM)
Main:
Main 2:
Thrust Width:
2.8350" (72.009 MM)
Rear Seal Diameter:
23500245, 23502592
Casting Numbers:
Comments:
H/O L56 DIESEL, CHEVROLET, TURBO * #5: .0018-.0047
GM
6.5
397
1.135 @ #3
94-95
229
L56
4.0541-4.0551" (102.974-103. MM)
Stroke: 3.8189" (97. MM)

Cyl Bore:
2.3982-2.3992" (60.914-60.94 MM)
Rods:
1-4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9494-2.9503" (74.915-74.938 MM)
Main:
Main 2:
Thrust Width:
2.8350" (72.009 MM)
Rear Seal Diameter:
23500245, 23502592
Casting Numbers:
Comments:
L/D L49 DIESEL, CHEVROLET, NON-TURBO PU & VAN * #5: .0018-.0047
L65
4.0541-4.0551" (102.974-103. MM)
1.135 @ #3
L49

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
6.5
GM
397
Stroke: 3.8189" (97. MM)

2.3982-2.3992" (60.914-60.94 MM)
Rods:
1-4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9494-2.9503" (74.915-74.938 MM)
Main 2:
2.8350" (72.009 MM)
Rear Seal Diameter:
23500245, 23502592
Casting Numbers:
Comments:
GM
(cont.)
94-99
Cyl Bore:
4.0541-4.0551" (102.974-103. MM)
Thrust Width:
1.135 @ #3
H/D CHEVROLET, NON-TURBO VAN P TRUCKS & HUMMER 4WD * NUMBER 5 MAIN BEARING OIL
CLEARANCE .0020-.0037" (.050-.093 MM)
6.5
397
98-99
Stroke: 3.8189" (97. MM)

Cyl Bore:
2.3982-2.3992" (60.914-60.94 MM)
Rods:
1-4 2.9495-2.9504" (74.917-74.94 MM)
Main 1:
5 2.9494-2.9503" (74.915-74.938 MM)
Main:
Main 2:
Thrust Width:
2.8350" (72.009 MM)
Rear Seal Diameter:
23500245, 23502592
Casting Numbers:
Comments:
DIESEL, CHEVROLET, TURBO & NON * #5: .0018-.0047
GM
Engine Model
6.6
400
4.0541-4.0551" (102.974-103. MM)
1.135 @ #3
FIREBIRD
67-79
4.120" (104.648 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
1.143 @ #4
Main:
Thrust Width:
3.193"
Rear Seal Diameter:
103427, 4813, 496452, 531369, 541585, 544191, 9773382, 9773383, 9773524, 9773524, 9773573,
Casting Numbers:
9782646, 9782646, 9782770, 9783786, 9793573, 97954, 9795479, 9795479
Comments:
PONTIAC, GTO, FIREBIRD * FLYWHEEL CENTERING RING MAY BE 2.490" OR 2.750"
GM
6.6
400
RO
Stroke: 3.980" (101.092 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
397363, 404440, 604440
Casting Numbers:
Comments:
4.000" BORE OLDSMOBILE 4.125" STROKE
GM
6.6
400
6.6
400
4.000" (101.6 MM)
Thrust Width:
1.200 @ #3
Cyl Bore:
4.040" (102.616 MM)
Thrust Width:
1.062 @ #3
Stroke: 3.900" (99.06 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
1379242
Casting Numbers:
Comments:
BUICK
GM
65-69
Cyl Bore:
67-69
RO
68-69
3.870" (98.298 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
#1 2.9993-3.0003" (76.175-76.2 MM)
Main:
1.220 @ #3
Main:
Thrust Width:
230331, 230377, 230378, 230907, 230908, 396021, 397303, 397363, 400943, 403707, 404440, 405954
Casting Numbers:
Comments:
3.870" BORE OLDSMOBILE 4.250" STROKE
GM
Stroke:
Rods:
6.6
400
3.750" (95.25 MM)

2.0990-2.1000" (53.315-53.34 MM)
#1 2.6484-2.6493" (67.269-67.292 MM)

Main:
Main:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3882841, 3951528, 3951529
Casting Numbers:
Comments:
CHEVROLET SMALL BLOCK
70-78
Cyl Bore:
4.125" (104.775 MM)
Rod Width:
1.900" (48.26 MM)
Thrust Width:
1.722 @ #5
230
L57

Make
Liter
CID
Vin
Model
GM
GM
Year
Engine Model
8 Cylinders
6.6
400
(cont.)
72-75
4.120" (104.648 MM)

Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.1430 @ #4
Main:
Thrust Width:
3.193"
Rear Seal Diameter:
013427, 103427, 4813, 496452, 531369, 541585, 544191, 9773382, 9773383, 9773524, 9773524,
Casting Numbers:
9773573, 9782646, 9782646, 9782770, 9783786, 9793573, 9795479, 9795479
PONTIAC, 2 BBL **#5: .0007-.0037, * FLYWHEEL CENTERING RING MAY BE 2.490" OR 2.750"
Comments:
GM
6.6
400
72-77
4.120" (104.648 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.1430 @ #4
Main:
Thrust Width:
3.193"
Rear Seal Diameter:
103427, 481380, 496452, 531369, 541585, 544191, 9773382, 9773383, 9773524, 9773573, 9782646,
Casting Numbers:
9782770, 9783786, 9793573, 9795479
Comments:
PONTIAC, 4BBL * FLYWHEEL CENTERING RING MAY BE 2.490" OR 2.750"
GM
6.6
400
74-75
4.120" (104.648 MM)

Cyl Bore:
2.2487-2.2497" (57.117-57.142 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.1430 @ #4
Main:
Thrust Width:
3.193"
Rear Seal Diameter:
013427, 103427, 4813, 496452, 531369, 541585, 9773383, 9773524, 9773524, 9773573, 9782646,
Casting Numbers:
9782646, 9782770, 9783786, 9793573, 9795479, 9795479
Comments:
PONTIAC, 2BBL ** #5: .0007-.0037, * FLYWHEEL CENTERING RING MAY BE 2.490" OR 2.750"
GM
6.6
400
75-75
4.120" (104.648 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
1.1430 @ #4
Main:
Thrust Width:
3.193"
Rear Seal Diameter:
103427, 4813, 496452, 531369, 541585, 544191, 9773382, 9773383, 9773524, 9773573, 9782646,
Casting Numbers:
9782770, 9783786, 9793573, 97954, 9795479
Comments:
PONTIAC, 4BBL * FLYWHEEL CENTERING RING MAY BE 2.490" OR 2.750"
GM
6.6
400
Stroke: 3.750" (95.25 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
1 - 4 2.6484-2.6493" (67.269-67.292 MM)
Main 1:
5 2.6479-2.6488" (67.257-67.28 MM)
Main:
Main 2:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3882841, 3951528, 3951529
Casting Numbers:
Comments:
CHEVROLET SMALL BLOCK, 4BBL * #5: .0011-.0039
GM
6.6
400
75-76
Cyl Bore:
4.125" (104.775 MM)
Thrust Width:
1.722 @ #5
77-79
4.120" (104.648 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
1.1430 @ #4
Main:
Thrust Width:
3.193"
Rear Seal Diameter:
013427, 103427, 4813, 481379, 481380, 496452, 496452, 531369, 541585, 544191, 9773382, 9773383,
Casting Numbers:
9773524, 9773524, 9773573, 9782646, 9782646, 9782770, 9783786, 9793573, 97954, 9795479, 9795479
Comments:
PONTIAC * FLYWHEEL CENTERING RING MAY BE 2.490" OR 2.750"
GM
6.6
400
Stroke: 3.750" (95.25 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
1-4 2.6484-2.6493" (67.269-67.292 MM)
Main 1:
5 2.6479-2.6488" (67.257-67.28 MM)
Main:
Main 2:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3882841, 3951528, 3951529
Casting Numbers:
Comments:
CHEVROLET, 4BBL * #5: .0011-.0039
77-80
Cyl Bore:
4.125" (104.775 MM)
Thrust Width:
1.722 @ #5
231

Make
Liter
CID
Vin
Model
Year
GM
GM
8 Cylinders
6.6
400
Stroke: 3.750" (95.25 MM)

2.0990-2.1000" (53.315-53.34 MM)
Rods:
1-4 2.6484-2.6493" (67.269-67.292 MM)
Main 1:
5 2.6479-2.6488" (67.257-67.28 MM)
Main 2:
3882841, 3951528, 3951529
Casting Numbers:
Comments:
GM
Engine Model
(cont.)
79-80
Cyl Bore:
4.125" (104.775 MM)
Thrust Width:
1.722 @ #5
CHEVROLET, 4BBL * #5: .0011-.0039
6.6
401
B.
59-66
4.1875" (106.363 MM)

Stroke: 3.640" (92.456 MM)
Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.4980-2.4990" (63.449-63.475 MM)
Main:
1.062 @ #3
Main:
Thrust Width:
1361798, 1396294
Casting Numbers:
Comments:
BUICK ** CAUTION COUNTER WEIGHT ON FLYWHEEL MUST LINE UP WITH REAR C/ WEIGHT ON
CRANKSHAFT. IT CAN BE INSTALLED WRONG!
GM
6.6
402
70-72
Stroke: 3.7600" (95.504 MM)

2.1990-2.2000" (55.855-55.880 MM)
Rods:
1-4 2.7485-2.7495" (69.812-69.837 MM)
Main 1:
5 2.7478-2.7488" (69.794-69.820 MM)
Main:
Main 2:
Balance: Internal
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
Comments:
GEN IV, BIG BLOCK CHEVY
GM
6.6
403
Cyl Bore:
4.125" (104.775 MM)
Thrust Width:
1.8170 @ #5
77-77
4.351" (110.515 MM)

Stroke: 3.385" (85.979 MM)
Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
ROLLED
Rods:
Rod Fillet:
2.4985-2.4995" (63.462-63.487 MM)
ROLLED
Main:
Main Fillet:
1.199-1.203 @ #3
Main:
Thrust Width:
Balance: External
2.647" (67.234 MM)
Rear Seal Diameter:
390275, 556607
Casting Numbers:
Comments:
OLDSMOBILE, 4BBL * #5 .0015-.0031,403 CRANK MUST HAVE BALANCE HOLE IN 1ST THROW & GRV ON
#1 CNTR WT.
GM
6.6
403
77-81
4.351" (110.515 MM)

Stroke: 3.385" (85.979 MM)
Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
ROLLED
Rods:
Rod Fillet:
2.4985-2.4995" (63.462-63.487 MM)
ROLLED
Main:
Main Fillet:
1.199-1.203 @#3
Main:
Thrust Width:
Balance: External
2.647" (67.234 MM)
Rear Seal Diameter:
390275, 556607
Casting Numbers:
Comments:
OLDSMOBILE *#5 .0015-.0031,403 CRANK MUST HAVE BALANCE HOLE IN 1ST THROW & GRV ON #1
CNTR WT.
GM
6.6
403
78-79
4.3500-4.3520" (110.49-110.541 MM)

Stroke: 3.385" (85.979 MM)
Cyl Bore:
2.1238-2.1248" (53.945-53.97 MM)
ROLLED
Rods:
Rod Fillet:
2.4985-2.4995" (63.462-63.487 MM)
ROLLED
Main:
Main Fillet:
1.199-1.203 @#3
Main:
Thrust Width:
Balance: External
2.647" (67.234 MM)
Rear Seal Diameter:
390275, 556607
Casting Numbers:
Comments:
OLDSMOBILE, 4BBL *#5 .0015-.0031,403 CRANK MUST HAVE BALANCE HOLE IN 1ST THROW & GRV ON
#1 CNTR WT.
GM
6.6
403
TRUCK
Stroke: 3.8976" (99.000 MM)

Cyl Bore:
2.4764-2.4772" (62.902-62.922 MM)
Rods:
3.1459-3.1466" (79.905-79.925 MM)
Main:
Main:
Balance: External
Comments:
DURAMAX DIESEL, TURBO, 90 V-8, 4 VALVES PER CYL
232
01-05
LB7
4.0551-4.0557" (103.000-103.014 MM)

Make
Liter
CID
Vin
Model
Year
GM
Engine Model
8 Cylinders
6.7
GM
409
(cont.)
59-66
4.3125" (109.538 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
Rods:
#1 2.4980-2.4990" (63.449-63.475 MM)
Main:
1.8170 @ #5
Main:
Thrust Width:
Balance: Internal
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
0-191561, 0819, 3787072, 3788072, 3795589, 3824554, 3829027, 3837466, 3838396, 3838416, O-191561
Casting Numbers:
Comments:
GM
CHEVROLET
6.9
421
BONNEVILLE
Stroke: 4.0000" (101.6 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
ALL 3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Thrust Width:
542990, 9770488, 9773384, 9782769, 9783787
Casting Numbers:
Comments:
PONTIAC GRAND PRIX, BONNEVILLE, CATALINA
GM
6.9
421
61-66
4.0938" (103.983 MM)
1.2030 @ #4
BONNEVILLE
61-66
4.0938" (103.983 MM)

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
#1 3.2490-3.2500" (82.525-82.55 MM)
Main:
1.2030 @ #4
Main:
Thrust Width:
542990, 9770488, 9773384, 9773384, 9782769, 9783787
Casting Numbers:
Comments:
PONTIAC GRAND PRIX, BONNEVILLE, CATALINA * TWO DIFFERENT CRANKSHAFT NOSE LENGTHS
EARLY 1963-64 2.500" 1/2 AND LATE 1965-66 USES A 3.00"
GM
7.0
425
Stroke: 3.6400" (92.456 MM)

2.2490-2.2550" (57.125-57.277 MM)
Rods:
2.4980-2.4990" (63.449-63.475 MM)
Main:
Main:
3.4700" (88.138 MM)
Rear Seal Diameter:
1185539, 1361798, 1396294
Casting Numbers:
Comments:
BUICK
GM
Stroke:
Rods:
7.0
425
7.0
425
GM
7.0
425
Thrust Width:
1.1340 @ #4
Cyl Bore:
4.1260" (104.8 MM)
Rod Width:
1.877-1.880" (47.676-47.752 MM)
Thrust Width:
1.199-1.203 @#3
Cyl Bore:
4.0820" (103.683 MM)
Thrust Width:
1.2650 @ #3
Cyl Bore:
4.0820" (103.683 MM)
Thrust Width:
1.2650 @ #3
65-67
Stroke: 4.0600" (103.124 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Balance: Internal
3.4700" (88.138 MM)
Rear Seal Diameter:
1486424, 1609142, 1609142R
Casting Numbers:
Comments:
4BC, CADILLAC
Stroke: 4.0600" (103.124 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Balance: Internal
3.4700" (88.138 MM)
Rear Seal Diameter:
1486424, 1609142, 1609142R
Casting Numbers:
Comments:
EFI, CADILLAC
4.3125" (109.538 MM)
3.9750" (100.965 MM)

2.4988-2.5003" (63.47-63.508 MM)
2.9993-3.0003" (76.182-76.208 MM)

Main:
Main:
384722, 390370, 397363, 404440
Casting Numbers:
Comments:
OLDSMOBILE
GM
63-66
Cyl Bore:
77-79
77-79
233

Make
Liter
CID
Vin
Model
Year
GM
GM
8 Cylinders
7.0
427
Y/E
Stroke: 4.0000" (101.600 MM)

2.0991-2.0999" (53.318-53.338 MM)
Rods:
2.5587-2.5594" (64.992-65.008 MM)
Main:
Main:
CORVETTE Z06 SPECIAL EDITION
Comments:
GM
Stroke:
Rods:
7.0
427
CORVETTE
(cont.)
-06
LS7
Cyl Bore:
4.1246-4.1253" (104.766-104.784 MM)
Thrust Width:
1.029-1.032" (26.140-26.220 MM)
3.7600" (95.504 MM)

2.1990-2.2000" (55.855-55.88 MM)
Engine Model
66-90
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.2510" (107.975 MM)

7/64-9/64
2.005"
7/64-9/64
1.8170 @ #5
#1-4 2.7485-2.7495" (69.812-69.837 MM)

Main 1:
#5 2.7478-2.7488" (69.794-69.82 MM)
Main:
Main 2:
Balance: Internal
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 3804816, 3856223, 3863144, 3874874, 3882842, 3882847, 3882848, 3882849, 3887114, 3904815,
Casting Numbers:
3942411, 6223, 7115, 9115
Comments:
GEN IV
GM
7.0
427
91-96
Stroke: 3.7600" (95.504 MM)

Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
Rods:
Rod Fillet:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
4.3320" (110.032 MM)
Rear Seal Diameter:
10114187, 10114189
Casting Numbers:
Comments:
GEN V, CHEVROLET, GMC, LRO, TRUCK *#5 .0025-.0040"
GM
7.0
428
67-69

Cyl Bore:
2.2488-2.2498" (57.12-57.145 MM)
Rods:
#1 3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Thrust Width:
3.438" (87.352 MM)
Rear Seal Diameter:
542990, 9770488, 9773384, 9782769, 9783787
Casting Numbers:
Comments:
PONTIAC * USES CRANKSHAFT NOSE LENGTH OF 3.00"
GM
7.0
429
GM
7.0
430
7.4
454
1.2010 @ #4
63-67
Cyl Bore:
4.129" (104.877 MM)
Thrust Width:
1.140 @ #3
Cyl Bore:
4.1875" (106.363 MM)
Thrust Width:
1.0660 @ #4
Stroke: 3.9000" (99.06 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
1379242
Casting Numbers:
Comments:
BUICK
GM
4.1200" (104.648 MM)
CAD
Stroke: 4.000" (101.6 MM)

2.2488-2.2493" (57.12-57.132 MM)
Rods:
#1 2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
2.754-2.757" (69.951-70.027 MM)
Rear Seal Diameter:
1481021, 1481267, 1486340, 1488340
Casting Numbers:
Comments:
CADILLAC
67-69
70-75
4.250" (107.95 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1-4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 353039, 359730, 3963523, 3963524, 3967463, 3975945, 7416, 833039, N353039
Casting Numbers:
Comments:
GEN IV, 4BC
234
LR0
4.2500-4.2507" (107.95-107.968 MM)

.109-.141" (2.769-3.581 MM)
.109-.141" (2.769-3.581 MM)
1.8170 @ #5

Make
Liter
CID
Vin
Model
GM
Year
8 Cylinders
7.4
GM
454
Engine Model
(cont.)
75-76
4.2495-4.2525" (107.937-108.014 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main 2:
Thrust Width:
Balance: External
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3520, 3521, 353039, 359730, 3963523, 3963524, 3967416, 3967463, 3975945, 7416, 833039, N353039
Casting Numbers:
Comments:
GM
GEV IV, 4BC
7.4
454
76-78
4.250" (107.95 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1-4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 353039, 359730, 3963523, 3967463, 7416, 833039, N353039
Casting Numbers:
Comments:
GEV IV, 4BC
GM
7.4
454
76-79
4.250" (107.95 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 353039, 359730, 3963523, 3967463, 7416, 833039, N353039
Casting Numbers:
Comments:
GEN IV, 4BC
GM
7.4
454
80-81
4.250" (107.95 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 353039, 359730, 3963523, 3967463, 7416, 833039, N353039
Casting Numbers:
Comments:
GEN IV, 4BC
GM
7.4
454
80-86
4.250" (107.95 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1-4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
3521, 353039, 359730, 3963523, 3967463, 7416, 833039, N353039
Casting Numbers:
Comments:
GEN IV, 4BC
GM
7.4
454
87-90
4.2495-4.2525" (107.937-108.014 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1 - 4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
2.6300-2.6320" (66.802-66.854 MM)
Rear Seal Diameter:
1011, 188A, 3521, 353039, 359730, 3875945, 3963523, 3963524, 3967463, 3975945, 7416, N353039
Casting Numbers:
Comments:
GEN IV, TBI * REAR MAIN = .0020-.0032
GM
7.4
454
87-90
4.250" (107.95 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.88 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
1-4 2.7482-2.7492" (69.804-69.83 MM)
.109" (2.769 MM)
Main 1:
Main Fillet:
5 2.7478-2.7488" (69.794-69.82 MM)
1.815 @ #5
Main:
Main 2:
Thrust Width:
Balance: External
2.6300" (66.802 MM)
Rear Seal Diameter:
1011, 10114, 188A, 3521, 359730, 3875945, 3963523, 3963524, 3967463, 3975945, 7416, N353039
Casting Numbers:
Comments:
GEN IV, TBI
235

Make
Liter
CID
Vin
Model
GM
8 Cylinders
7.4
GM
454
Stroke: 4.000" (101.6 MM)

2.1990-2.2000" (55.855-55.88 MM)
Rods:
1-4 2.7482-2.7492" (69.804-69.83 MM)
Main 1:
5 2.7478-2.7488" (69.794-69.82 MM)
Main 2:
Balance: External
4.3320" (110.032 MM)
Rear Seal Diameter:
10114188, 14097044, 188A
Casting Numbers:
Comments:
GM
Engine Model
(cont.)
91-97
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.2495-4.2525" (107.937-108.014 MM)

7/64
7/64
1.815 @ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.2500-4.2507" (107.95-107.968 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.815 @ #5
GEN V, TBI
7.4
454
Stroke: 4.000" (101.6 MM)

2.1990-2.1996" (55.855-55.87 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
Balance: External
4.3320" (110.032 MM)
Rear Seal Diameter:
10114188, 14097044, 353039
Casting Numbers:
Comments:
GEN V, P/UP, K3500, GEN SETS
GM
Year
7.4
454
96-00
L29
98-00
L21
99-01
L21
4.3320" (110.032 MM)

Rear Seal Diameter:
Comments:
GEN V, VI, L21 MOTOR HOME P12/P32/P42 CHASSIS
GM
7.4
454
Stroke: 4.000" (101.6 MM)

2.1990-2.1996" (55.855-55.87 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
4.3320" (110.032 MM)
Rear Seal Diameter:
Comments:
GEN V, VI, TRUCK, L21, P12
GM
7.4
454
7.5
455
7.5
455
GM
7.5
455
1.8165-1.8195
Cyl Bore:
4.2500-4.2507" (107.950-107.968 MM)
Thrust Width:
1.8165-1.8195" (46.139-46.215 MM) @ #5
Cyl Bore:
4.1250" (104.775 MM)
Thrust Width:
1.200 @ #3
Cyl Bore:
4.3125" (109.538 MM)
Thrust Width:
1.0660 @ #3
Cyl Bore:
4.1510" (105.435 MM)
Thrust Width:
1.200 @ #4
99-01
68-76
Stroke: 3.9000" (99.06 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
Balance: External
3.4320" (87.172 MM)
Rear Seal Diameter:
1379242
Casting Numbers:
Comments:
BUICK VIN P, R, T, U, V, W
Stroke: 4.210" (106.934 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Balance: External
3.438-3.440" (87.352-87.376 MM)
Rear Seal Diameter:
496453, 9799103
Casting Numbers:
Comments:
PONTIAC
Thrust Width:
Stroke: 4.250" (107.95 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
3.150" (80.010 MM)
Rear Seal Diameter:
397363, 400943, 404440, 405954
Casting Numbers:
Comments:
OLDSMOBILE, HI & LOW COMPRESSION
GM
4.2500-4.2507" (107.950-107.968 MM)
Stroke: 4.0000" (101.600 MM)

2.1990-2.1996" (55.854-55.869 MM)
Rods:
ALL 2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
4.3320" (110.032 MM)
Rear Seal Diameter:
Comments:
GEN V, VI, LP4, MEDIUM DUTY TRUCK
GM
Cyl Bore:
70-76
70-76
236
LP4

Make
Liter
CID
Vin
Model
GM
8 Cylinders
7.5
GM
455
Stroke: 4.210" (106.934 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Balance: External
3.438" (87.352 MM)
Rear Seal Diameter:
496453, 9799103
Casting Numbers:
Comments:
GM
71-76
Cyl Bore:
4.156" (105.562 MM)
Thrust Width:
1.200 @ #4
Cyl Bore:
4.156" (105.562 MM)
Thrust Width:
1.200 @ #4
PONTIAC
7.5
455
X&Y
Stroke: 4.210" (106.934 MM)

2.2487-2.2497" (57.117-57.142 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Balance: External
3.438" (87.352 MM)
Rear Seal Diameter:
496453, 9799103
Casting Numbers:
Comments:
PONTIAC
GM
Year
7.5
455
71-76
72-75
4.125" (104.775 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.4988-2.4998" (63.47-63.495 MM)
Rods:
2.9993-3.0003" (76.182-76.208 MM)
Main:
1.200 @ #3
Main:
Thrust Width:
3.150" (80.010 MM)
Rear Seal Diameter:
230331, 230377, 230378, 230907, 230908, 397303, 397363, 400943, 403707, 405954
Casting Numbers:
Comments:
4BC, OLDSMOBILE
GM
7.5
455
74-74
4.125" (104.775 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.500 MM)
Rods:
2.9990-3.0000" (76.175-76.200 MM)
Main:
1.200 @ #3
Main:
Thrust Width:
Balance: External
3.150" (80.010 MM)
Rear Seal Diameter:
230331, 230377, 230378, 230907, 230908, 397303, 397363, 400943, 403707, 405954
Casting Numbers:
Comments:
4BC, OLDSMOBILE
GM
7.5
455
74-74
4.125" (104.775 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.500 MM)
Rods:
2.9990-3.0000" (76.175-76.200 MM)
Main:
1.200 @ #3
Main:
Thrust Width:
Balance: External
3.150" (80.010 MM)
Rear Seal Diameter:
230331, 230377, 230378, 230907, 230908, 397303, 397363, 400943, 403707, 405954
Casting Numbers:
Comments:
4BC, OLDSMOBILE
GM
7.5
455
74-76
4.125" (104.775 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.4988-2.4998" (63.47-63.495 MM)
Rods:
2.9993-3.0003" (76.182-76.208 MM)
Main:
1.200 @ #3
Main:
Thrust Width:
3.150" (80.010 MM)
Rear Seal Diameter:
230331, 230377, 230378, 230907, 230908, 397303, 397363, 400943, 403707, 405954
Casting Numbers:
Comments:
2&4BC,OLDSMOBILE,LO COMPRESSION, ALSO VIN T,U,V,W
GM
7.5
455
74-76
4.125" (104.775 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.500 MM)
Rods:
2.9990-3.0000" (76.175-76.200 MM)
Main:
1.200 @ #3
Main:
Thrust Width:
Balance: External
3.150" (80.010 MM)
Rear Seal Diameter:
230331, 230377, 230378, 230907, 230908, 397303, 397363, 400943, 403707, 405954
Casting Numbers:
Comments:
4BC, OLDSMOBILE
237
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
Year
GM
GM
8 Cylinders
7.7
472
Stroke: 4.0600" (103.124 MM)

2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
3.470" (88.138 MM)
Rear Seal Diameter:
1486424, 160914R
Casting Numbers:
Comments:
GM
Engine Model
(cont.)
68-74
Cyl Bore:
4.3000" (109.22 MM)
Thrust Width:
1.2670 @ #3
4BC, CADILLAC 3/16" X 1.500" KEYWAY LENGTH, 9/16" FINE THREAD BOLT
8.1
496
01-04
4.2500-4.2507" (107.950-107.968 MM)

Stroke: 4.370" (111.000 MM)
Cyl Bore:
2.1990-2.1996" (55.854-55.869 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
2.335" (59.309 MM)
Main:
4.332" (110.032 MM) SPECIAL TEFLON SEALS
Rear Seal Diameter:
Comments:
SFI, MEDIUM DUTY TRUCK HO ENGINE USES STEEL CRANKSHAFT, BASE USES CAST IRON
CRANKSHAFT.
GM
8.1
496
SAVANA
01-04
4.2500-4.2507" (107.950-107.968 MM)

Stroke: 4.370" (111.000 MM)
Cyl Bore:
2.1990-2.1996" (55.854-55.869 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
2.335" (59.309 MM)
Main:
4.332" (110.032 MM) SPECIAL TEFLON SEALS
Rear Seal Diameter:
Comments:
SFI, SAVANA , SIERRA 2500 HO ENGINE USES STEEL CRANKSHAFT, BASE USES CAST IRON
CRANKSHAFT
GM
8.2
500
70-73
4.3000" (109.22 MM)

Stroke: 4.3040" (109.322 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
1.2590" (31.978 MM) @ #3
Main:
Thrust Width:
3.4700" (88.138 MM)
Rear Seal Diameter:
1495094, 1495095, 1496793
Casting Numbers:
Comments:
4BC, CADILLAC 3/16" X 1.500" KEYWAY LENGTH, 9/16" FINE BOLT THREAD
GM
8.2
500
70-76
4.3000" (109.22 MM)

Stroke: 4.3040" (109.22 MM)
Cyl Bore:
2.4990-2.5000" (63.475-63.5 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
1.2590" (31.978 MM) @ #3
Main:
Thrust Width:
3.4700" (88.138 MM)
Rear Seal Diameter:
1495094, 1495095, 1496793
Casting Numbers:
Comments:
4BC, CADILLAC 3/16" X 1.500" KEYWAY LENGTH, 9/16" FINE BOLT THREAD
GM
8.2
500
80-91
Stroke: 4.409" (111.989 MM)

Cyl Bore:
2.7549-2.7559" (69.974-70. MM)
Rods:
Rod Fillet:
3.9360-3.9370" (99.974-100. MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
5.187" (131.75 MM)
Rear Seal Diameter:
8920193, 8922124
Casting Numbers:
Comments:
DDC DIESEL, 4 CYCLE, NON-TURBO O/S THRUST FLG AVLB
GM
8.2
500
4.2520-4.2546" (108.001-108.067 MM)

.094" ROLLED (2.388 MM)
.094" ROLLED (2.388 MM)
1.258 @ #4
80-91
Stroke: 4.409" (111.989 MM)

Cyl Bore:
2.7549-2.7559" (69.974-70. MM)
Rods:
Rod Fillet:
3.9360-3.9370" (99.974-100. MM)
Main:
Main Fillet:
Main:
Thrust Width:
5.187" (131.75 MM)
Rear Seal Diameter:
8922124
Casting Numbers:
Comments:
DDC DIESEL, 4 CYCLE, TURBO O/S FLG THRUST BRG AVLB
238
4.2520-4.2546" (108.001-108.067 MM)

.094" (2.388 MM)
.094
1.258 @ #4

Make
Liter
CID
Vin
Model
Year
GM
8 Cylinders
8.2
GM
502
Stroke: 4.000" (101.6 MM), FORGED STEEL

2.1990-2.1996" (55.855-55.87 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
4.3320" (110.032 MM)
Rear Seal Diameter:
14097044
Casting Numbers:
Comments:
ENGINE 502
HO 502
4.4655-4.4662" (113.424-113.441 MM)
Thrust Width:
@ #5
CRATE ENGINE 502 GEN VI CAST IRON RECTANGULAR PORT
GM
8.2
502
ZZ ENGINE 502-5
HANOMAG
HANOMAG
6.3
387
580
D942
4.7244-4.7253" (120.-120.023 MM)
.189-.203" (4.801-5.156 MM)
.189-.203
1.890-1.892
9.5
D962B
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
580
10.8
660
Stroke: 5.512" (140.005 MM)

3.3456-3.3465" (84.978-85.001 MM)
Rods:
#1 4.1335-4.1344" (104.991-105.014 MM)
Main:
Main:
Comments:
GERMAN DIESEL
D962B
4.7244-4.7253" (120.-120.023 MM)
.189-.203" (4.801-5.156 MM)
.189-.203
1.890-1.892
D962K
Stroke: 5.512" (140.000 MM)

Cyl Bore:
3.3456-3.3473" (84.978-85.022 MM)
Rods:
Rod Fillet:
4.1335-4.1344" (104.991-105.013 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL,DIR INJ,SAME AS D962B EXCEPT FOR HEAD SPECS
HANOMAG
@ #5
6 Cylinders
9.5
Stroke: 5.512" (140.005 MM)

3.3456-3.3465" (84.978-85.001 MM)
Rods:
#1 4.1335-4.1344" (104.991-105.014 MM)
Main:
Main:
GERMAN DIESEL, MASSEY FERGUSON D600C
Comments:
HANOMAG
ZZ 502
D942
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
HANOMAG
HANOMAG
00-06
4 Cylinders
Stroke: 5.512" (140.005 MM)

3.3456-3.3465" (84.978-85.001 MM)
Rods:
#1 4.1335-4.1344" (104.991-105.014 MM)
Main:
Main:
GERMAN DIESEL, MASSEY FERGUSON 44C
Comments:
D962K
4.7244-4.7253" (120.000-120.022 MM)
.188-.204" (4.80-5.20 MM)
.188-.204" (4.80-5.20 MM)
D963B
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
HATZ
D963B
5.039" (127.991 MM)
.189-.203" (4.801-5.156 MM)
.189-.203
1.890-1.892
2 Cylinders
1.1
64
Stroke: 3.937" (100.000 MM)

1.8870-1.8874" (47.930-47.940 MM)
Rods:
1 2.1272-2.1278" (54.032-54.045 MM)
Main 1:
2 2.3972-2.3980" (60.890-60.910 MM)
Main 2:
3 2.5989-2.5994" (66.011-66.024 MM)
Main 3:
DIESEL, 4 STROKE, DIRECT INJ
Comments:
HATZ
96-01
(cont.)
Cyl Bore:
Stroke: 4.0000"(101.600 MM) FORGED STEEL

2.1990-2.1996" (55.855-55.87 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
Thrust Width:
4.3320" (110.032 MM)
Rear Seal Diameter:
Comments:
CRATE ENGINE 502 - 502 GEN VI, ALUMINUM HEADS OVAL
HATZ
Engine Model
1.2
Stroke: 3.5433" (90.000 MM)

2.0051-2.0055" (50.930-50.940 MM)
Rods:
1 2.1272-2.1278" (54.032-54.045 MM)
Main 1:
2 2.3972-2.3980" (60.890-60.910 MM)
Main:
Main 2:
3 2.5989-2.5994" (66.011-66.024 MM)
Main 3:
Comments:
DIESEL, 4 STROKE, DIRECT INJ
Z782
70
Z782
3.228" (82.000 MM)
Cyl Bore:
Z788
Cyl Bore:
239
Z788
3.5433-3.5437" (90.000-90.010 MM)

Make
Liter
CID
Vin
Model
HATZ
2 Cylinders
1.3
HATZ
78
Z789
Stroke: 3.9370" (100.000 MM)

Cyl Bore:
2.0051-2.0055" (50.930-50.940 MM)
Rods:
1 2.1272-2.1278" (54.032-54.045 MM)
Main 1:
2 2.3972-2.3980" (60.890-60.910 MM)
Main 2:
3 2.5989-2.5994" (66.011-66.024 MM)
Main 3:
DIESEL, 4 STROKE, DIRECT INJ, MODEL Z789 & Z790
Comments:
1.5
HATZ
90
Stroke: 3.5433" (90.000 MM)

2.51893-2.51969" (63.980-64.000 MM)
Rods:
2.8339-2.8346" (71.981-72.000 MM)
Main:
Main:
Comments:
DIESEL, 2L31 & 2M31, 4 STROKE, DIR INJ
1.7
HATZ
Engine Model
(cont.)
Z789 & Z790
3.5433-3.5437" (90.000-90.010 MM)
L31
2L31
4.0157" (102.000 MM)
Cyl Bore:
105
Stroke: 4.1338" (105.000 MM)

2.51893-2.51969" (63.980-64.000 MM)
Rods:
2.8339-2.8346" (71.981-72.000 MM)
Main:
Main:
Comments:
L40
2L40
4.0157" (102.000 MM)
Cyl Bore:
HATZ
3 Cylinders
2.2
HATZ
134
Stroke: 3.5433" (90.000 MM)

2.51893-2.51969" (63.980-64.000 MM)
Rods:
2.8339-2.8346" (71.981-72.000 MM)
Main:
Main:
Comments:
2.6
HATZ
L31
3L31
4.0157" (102.000 MM)
Cyl Bore:
157
Stroke: 4.1338" (105.000 MM)

2.51893-2.51969" (63.980-64.000 MM)
Rods:
2.8339-2.8346" (71.981-72.000 MM)
Main:
Main:
Comments:
L40
3L40
4.0157" (102.000 MM)
Cyl Bore:
HATZ
4 Cylinders
2.9
HATZ
Stroke:
Rods:
Year
179
3.5433" (90.000 MM)

2.51893-2.51969" (63.980-64.000 MM)
L31
4L31
4.0157" (102.000 MM)
.157-.169" (4.000-4.300 mm)
1.2568-1.2622" (32.000-32.062 mm)
Cyl Bore:
Rod Fillet:
Rod Width:
2.8339-2.8346" (71.981-72.000 MM)

Main:
Main:
Comments:
3.4
HATZ
209
Stroke: 4.1338" (105.000 MM)

2.51893-2.51969" (63.980-64.000 MM)
Rods:
2.8339-2.8346" (71.981-72.000 MM)
Main:
Main:
Comments:
L40
Cyl Bore:
HENRY
4 Cylinders
2.2
HENRY
134
Stroke: 4.375" (111.125 MM)

1.9373-1.9383" (49.207-49.233 MM)
Rods:
#1 2.3331-2.3341" (59.261-59.286 MM)
Main:
Main:
635280, 638121, 641127, 646318
Casting Numbers:
Comments:
HENRY
4L40
4.0157" (102.000 MM)
51-53
Cyl Bore:
Rod Fillet:
3.125" (79.375 MM)

.094" (2.388 MM)
Thrust Width:
1.9270
WILLYS JEEP
2.2
134
53-71
Stroke: 3.875" (98.425 MM)

Cyl Bore:
2.3331-2.3341" (59.261-59.286 MM)
Main:
Main:
Thrust Width:
2.311" (58.699 MM)
Rear Seal Diameter:
641127, 646318
Casting Numbers:
Comments:
JEEP , F HEAD, ONE VALVE IN BLOCK, L = FLATHEAD * WASHERS
240
3.313" (84.150 MM)

@ #1 *

Make
Liter
CID
Vin
Model
Year
HENRY
6 Cylinders
2.6
HENRY
161
Stroke: 3.500" (88.9 MM)

1.8740-1.8750" (47.6-47.625 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
642462
Casting Numbers:
Comments:
Engine Model
51-54
Cyl Bore:
Rod Fillet:
3.125" (79.375 MM)

.094" (2.388 MM)
Thrust Width:
1.3080
WILLYS JEEP
HERCULES
2 Cylinders
0.9
HERCULES
57
NXA
NXA
3.000" (76.2 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7470-1.7480" (44.374-44.399 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
1.631
Main:
Thrust Width:
156026E, 2202250, 28924D, 29590D, 38530, 38534, 39572D, C1043
Casting Numbers:
Comments:
NXA
1.1
HERCULES
66
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Comments:
NXB
NXB
NXB
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

.094" (2.388 MM)
Thrust Width:
1.631
HERCULES
3 Cylinders
2.1
HERCULES
130
Stroke: 4.500" (114.3 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
2.4976-2.4986" (63.439-63.464 MM)
Main:
Main:
261025E
Casting Numbers:
Comments:
GO-130
GO-130
3.500" (88.9 MM)
Cyl Bore:
STD CRANKSHAFT
2.4
HERCULES
149
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
1.8740-1.8750" (47.6-47.625 MM)
Main: Seal Diameter:
Front
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
Comments:
DIESEL
2.4
HERCULES
2.8
Main Fillet:
.1400-.1700
GO-149
169
D-1700
D-1700
Cyl Bore:
3.9987-4.0011" (101.567-101.628 MM)
Main Fillet:
.1400-.1700
HERCULES
4 Cylinders
1.0
HERCULES
59
Stroke: 3.000" (76.2 MM)

1.4970-1.4980" (38.024-38.049 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
58225D, 60181
Casting Numbers:
HERCULES
Casting Numbers:
ZXA, ZXA3
Cyl Bore:
Rod Fillet:
2.500" (63.5 MM)

.094" (2.388 MM)
Thrust Width:
1.407
ZXA & XA3
1.0
59
ZXA, ZXA3
ZXA, ZXA3
1.0
59
ZXA,ZXA3
ZXA,ZXA3
58225D, 60181
HERCULES
Casting Numbers:
GO-149
3.750" (95.25 MM)
Cyl Bore:
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
1.8740-1.8750" (47.6-47.625 MM)
Front
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
Comments:
DIESEL
D-1500
3.7492-3.7516" (95.23-95.291 MM)
149
Stroke: 4.500" (114.3 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
2.4976-2.4986" (63.439-63.464 MM)
Main:
Main:
261025E
Casting Numbers:
Comments:
STD CRANKSHAFT
HERCULES
D-1500
Cyl Bore:
59228
241

Make
Liter
CID
Vin
Model
Year
HERCULES
4 Cylinders
1.1
HERCULES
65
Stroke: 3.000" (76.2 MM)

1.4970-1.4980" (38.024-38.049 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
59228
Casting Numbers:
Comments:
ZXA, ZXB3
Cyl Bore:
Rod Fillet:
2.625" (66.675 MM)

.094" (2.388 MM)
Thrust Width:
1.407
Engine Model
(cont.)
ZXA & ZXB3
ZXA, ZXB MARINE
HERCULES
1.3
79
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
27068D, 27225D, 29590D
Casting Numbers:
HERCULES
Casting Numbers:
HERCULES
1.3
HERCULES
HERCULES
IX5
2.500" (63.5 MM)
.094" (2.388 MM)
Thrust Width:
1.475
79
IX5
IX5
27068D, 27225D, 29590D
1.6
95
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
27068D, 27225D, 29590D, 39572-D
Casting Numbers:
Casting Numbers:
IX5
Cyl Bore:
Rod Fillet:
1.6
IXF3
IXF3
Cyl Bore:
Rod Fillet:
2.750" (69.85 MM)

.094" (2.388 MM)
Thrust Width:
1.475
95
IXF3
IXF3
113
IXA, IXB3
IXA-3 & IXB-3
27068D, 27225D, 29590D
1.8
3.000" (76.200 MM)

Stroke: 4.000" (101.600 MM)
Cyl Bore:
1.7470-1.7480" (44.374-44.399 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
1.9870-1.9880" (50.47-50.495 MM)
Main:
1.475"
Main:
Thrust Width:
156026E, 2202250, 220229C, 28924D, 29590D, 38530, 38534, C1043
Casting Numbers:
Comments:
IXA-3 - 3.00" BORE, IXB - 3.25" BORE SEE 2.2L
HERCULES
Casting Numbers:
HERCULES
2.0
123
2.0
123
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
27068D, 27225D, 29590D
Casting Numbers:
HERCULES
2.2
IXK3
2.2
IXK3
IXK3
Cyl Bore:
Rod Fillet:
3.125" (79.375 MM)

.094" (2.388 MM)
Thrust Width:
1.4750
133
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Comments:
DIX SERIES
HERCULES
IXK3
27068D, 27225D, 29590D
DIX-4-B
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

.094" (2.388 MM)
Thrust Width:
1.475
133
IXA, IXB3
DIX-4-B
IXA & IXB3
3.250" (82.55 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7470-1.7480" (44.374-44.399 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
1.475
Main:
Thrust Width:
156026E, 156026E, 2202250, 2202250, 220229C, 220229C, 28924D, 28924D, 29590D, 29590D, 38530,
Casting Numbers:
38530, 38534, 38534, C1043, C1043
HERCULES
2.3
Stroke: 3.000" (76.2 MM)

1.9979-1.9987" (50.747-50.767 MM)
Rods:
2.2477-2.2485" (57.092-57.112 MM)
Main:
Main:
3.375" (85.725 MM)
Rear Seal Diameter:
141
G1400
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
242
G1400
3.875" (98.425 MM)
.125" (3.175 MM)
.125
1.822

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
4 Cylinders
2.3
141
IXLB
Stroke: 4.250" (107.95 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
235032
Casting Numbers:
HERCULES
2.7
163
Stroke: 3.250" (82.55 MM)

1.9979-1.9987" (50.747-50.767 MM)
Rods:
#1 2.2477-2.2485" (57.092-57.112 MM)
Main:
Main:
Balance: Internal
3.375" (85.725 MM)
Rear Seal Diameter:
40-2002601, A-472, G1600X119, X3501
Casting Numbers:
Comments:
FORKLIFT USED BY CAT AND DAEWOO
HERCULES
2.7
IXLB
3.250" (82.55 MM)
.094" (2.388 MM)
Thrust Width:
1.475
G1600
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
164
HERCULES
2.7
164
HERCULES
2.7
HERCULES
2.8
166
HERCULES
2.9
3.625" (92.075 MM)

.094" (2.388 MM)
Thrust Width:
1.475
176
3.1
DIX-4-D
3.500" (88.9 MM)

.156" (3.962 MM)
2.127
CV4-180
188
JX4C-3
188
JX4C-3
3.750" (95.25 MM)

.109" (2.769 MM)
2.131
JX4C-5
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
5 GEAR
243
CV4-180
4.000" (101.6 MM)
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
3 GEAR
HERCULES
2.131
DIX-4-D
Cyl Bore:
3.1
JX4E-5
3.500" (88.9 MM)
.109" (2.769 MM)
173
3.500" (88.9 MM)

1-3 2.626" (66.7 MM)
HERCULES
2.131
Cyl Bore:
Rod Fillet:
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4976-2.4986" (63.439-63.464 MM)
Rods:
Rod Fillet:
#1 2.8734-2.8744" (72.984-73.01 MM)
Main:
Main:
Thrust Width:
256025E, 256025E, 256026E, 256026E, 258025, 258025
Casting Numbers:
Stroke:
Main:
Main:
JX4E-3
3.500" (88.9 MM)
.109" (2.769 MM)
JX4E-5
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
5 GEAR
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Comments:
DIX SERIES
G1600
4.000" (101.6 MM)
.125" (3.175 MM)
.125" (3.175 MM)
1.822" (46.278 MM)
JX4E-3
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
3 GEAR
(cont.)
IXLB
Cyl Bore:
Rod Fillet:
Engine Model
3.750" (95.25 MM)

.109" (2.769 MM)
2.131
JX4C-5

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
4 Cylinders
3.3
199
3.3
3.7492-3.7516" (95.23-95.291 MM)
Main Fillet:
.1400-.1700
199
DOOB
3.3
199
HERCULES
3.3
3.3
199
3.3
199
199
3.5
HERCULES
3.7
214
226
DT
HERCULES
3.7
226
2.131
2.131
244
JX4D-3
4.000" (101.6 MM)

.109" (2.769 MM)
2.131
SERIES I
4.000" (101.6 MM)
.140-.170" (3.556-4.318 MM)
.140-.170
D
Cyl Bore:
Rod Fillet:
Main Fillet:
JX4L-CER
3.750" (95.25 MM)

.109" (2.769 MM)
D
Cyl Bore:
Rod Fillet:
Main Fillet:
DT(2)
JX4L-C5
3.750" (95.25 MM)

.109" (2.769 MM)
JX4D-3
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
Internal
Main:
Balance:
1.874-1.875" (47.6-47.625 MM)
4.310-4.315" (109.474-109.601 MM)
Rear Seal Diameter:
Comments:
SERIES I, TURBO DIESEL, MODEL D
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
Internal
Main:
Balance:
1.874-1.875" (47.6-47.625 MM)
4.310-4.315" (109.474-109.601 MM)
Rear Seal Diameter:
Comments:
SERIES II, TURBO DIESEL, MODEL D
2.131
JX4L-CER
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
3 GEAR
JX4L-C3
3.750" (95.25 MM)

.109" (2.769 MM)
JX4L-C5
Stroke: 4.500" (114.3 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
5 GEAR
HERCULES
G2000
JX4L-C3
Stroke: 4.500" (114.3 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
5 GEAR
HERCULES
2.127
3.750" (95.25 MM)

.140-.170" (3.556-4.318 MM)
Cyl Bore:
Rod Fillet:
Stroke: 4.500" (114.3 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
3 GEAR
HERCULES
DOOB
3.750" (95.25 MM)
.109" (2.769 MM)
G2000
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
Main:
Comments:
GAS
D-200
Cyl Bore:
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4970-2.4980" (63.424-63.449 MM)
Rods:
Rod Fillet:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
Thrust Width:
256025E, 256026E, 256031, 258025, 74600D, 750604D
Casting Numbers:
Comments:
DOO SERIES
HERCULES
(cont.)
D-2000
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
1.8740-1.8750" (47.6-47.625 MM)
Front
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
DIESEL
Comments:
HERCULES
Engine Model
SERIES II
4.000" (101.6 MM)
.140-.170" (3.556-4.318 MM)
.140-.170

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
4 Cylinders
3.7
226
Engine Model
(cont.)
D2300
D2300
140026D, 155025E, 40091E, 40094D, 40094E, 40950E, 40991E, 42979E, 43526D, 43526E, 43531E,
43532, 44025E, 45853D, 45853E, 45855E, 45857E, 45859B, 45859D, 45868G, 46024F, 50024E, C5145
OLD D2300 DIESEL
Casting Numbers:
Comments:
HERCULES
3.7
226
D-2300
D-2300
3.9987-4.0011" (101.567-101.628 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
.1400-.1700
Main:
Main Fillet:
1.8740-1.8750" (47.6-47.625 MM)
Main:
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
140026D, 155025E, 40091E, 40094D, 40094E, 40950E, 40991E, 42979E, 43526D, 43526E, 43526E,
Casting Numbers:
43531E, 43531E, 43532, 43532, 44025E, 44025E, 45853D, 45853D, 45853E, 45853E, 45855E, 45855E,
45857E, 45857E, 45859B, 45859B, 45859D, 45859D, 45868G, 45868G, 46024F, 46024F, 50024E,
50024E, C5145
Comments:
DIESEL
HERCULES
3.7
226
DOOC
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4970-2.4980" (63.424-63.449 MM)
Rods:
Rod Fillet:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
Thrust Width:
256025E, 256026E, 256031, 258025, 74600D, 750604D
Casting Numbers:
Comments:
DOO SERIES
HERCULES
3.7
226
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
Main:
Comments:
GAS
HERCULES
3.7
HERCULES
3.7
226
3.7
GO-226
226
JX4L-D3
226
3.7
HERCULES
4.2
2.131
255
2.131
245
JX4L-DER
4.000" (101.6 MM)

.109" (2.769 MM)
2.131
DOOD
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.4970-2.4980" (63.424-63.449 MM)
Rods:
Rod Fillet:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
Thrust Width:
256025E, 256026E, 256031, 258025, 74600D, 750604D
Casting Numbers:
Comments:
DOO SERIES
JX4L-D5
4.000" (101.6 MM)

.109" (2.769 MM)
JX4L-DER
Stroke: 4.500" (114.3 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
3, 5 GEAR
JX4L-D3
4.000" (101.6 MM)

.109" (2.769 MM)
JX4L-D5
226
GO-226
4.000" (101.6 MM)
Cyl Bore:
Stroke: 4.500" (114.3 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
5 GEAR
HERCULES
G2300
3.9987-4.0012" (101.567-101.63 MM)
.140-.170" (3.556-4.318 MM)
Stroke: 4.500" (114.3 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
3 GEAR
HERCULES
2.127
G2300
Cyl Bore:
Rod Fillet:
Stroke: 4.500" (114.3 MM)

1.9870-1.9880"
Rods:
2.4965-2.4975"
Main:
Main:
Comments:
SIDE PLUG, STD CRANKSHAFT
DOOC
4.000" (101.6 MM)
.109" (2.769 MM)
DOOD
4.250" (107.95 MM)
.109" (2.769 MM)
2.127

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
4 Cylinders
5.2
320
Stroke: 4.250" (107.95 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
155026E, 156025E, 156028E, 255029, 458686
Casting Numbers:
Comments:
JX4D-5
(cont.)
JX4D-5
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.109" (2.769 MM)
Thrust Width:
2.131
5 GEAR
HERCULES
HERCULES
6 Cylinders
3.1
190
QXA-3
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9970-1.9980" (50.724-50.749 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
Engine Model
QXA-3
3.125" (79.375 MM)
.109" (2.769 MM)
1.945
GAS, 3 GEAR
HERCULES
3.1
190
QXA-5
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9970-1.9980" (50.724-50.749 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
GAS, 5 GEAR
HERCULES
3.1
QXA-5
3.125" (79.375 MM)
.109" (2.769 MM)
1.945
191
3.125" (79.375 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
7/64
Main:
Main Fillet:
1.9450
Main:
Thrust Width:
155026E, 155026E, 156025E, 156025E, 156028E, 156028E, 255029, 255029, 41026B, 41026B, 458686,
Casting Numbers:
458686, 46827E, 46827E, 46828E, 46828E, 46829B, 46829B, 46831E, 46831E, 47830D, 47830D
HERCULES
3.4
205
QXB-3
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9970-1.9980" (50.724-50.749 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
GAS, 3 GEAR
HERCULES
3.4
205
3.6
221
3.6
QXB-5
3.250" (82.55 MM)
.109" (2.769 MM)
1.945
QXC-3
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
GAS, 3 GEAR
HERCULES
1.945
QXB-5
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
GAS, 5 GEAR SEE 3.1L, 3.6L & 3.8L AS WELL
HERCULES
QXB-3
3.250" (82.55 MM)
.109" (2.769 MM)
221
QXC-3
3.375" (85.725 MM)
.109" (2.769 MM)
1.945
QXC-5
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
GAS, 5 GEAR
246
QXC-5
3.375" (85.725 MM)
.109" (2.769 MM)
1.945

Make
Liter
CID
Vin
Model
Year
HERCULES
6 Cylinders
3.8
HERCULES
230
QXD-3
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
Engine Model
(cont.)
QXD-3
3.4375" (87.313 MM)

.109" (2.769 MM)
1.945
GAS, 3 GEAR
HERCULES
3.8
230
QXD-5
Stroke: 4.125" (104.775 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 47830D
Casting Numbers:
Comments:
GAS, 5 GEAR
HERCULES
Casting Numbers:
HERCULES
3.8
1.945
232
40950E, 40991E, 42979E, 43526D, 43526E, 43531E, 43532, 44025E, 45853D, 45853E, 45855E, 45857E,
45859B, 45859D, 45868G, 46024F, 50024E
3.8
232
JXA
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Thrust Width:
140026D, 155025E, 40091E, 40094D, 40094E, C5145
Casting Numbers:
HERCULES
QXD-5
3.4375" (87.313 MM)
.109" (2.769 MM)
3.9
237
3.406" (86.512 MM)

.125" (3.175 MM)
2.131
QXLD-3
QXLD-3
3.4375" (87.313 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
1.945
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 46839E, 47830D, 49525B, 49528E
Casting Numbers:
Comments:
GAS, 3 GEAR
HERCULES
3.9
237
QXLD-5
QXLD-5
3.4375" (87.313 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
1.945
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 46839E, 47830D, 49525B, 49528E
Casting Numbers:
Comments:
GAS, 5 GEAR
HERCULES
3.9
237
QXLDER-3
QXLDER-3
3.4375" (87.313 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
1.945
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 46839E, 47830D, 49525B, 49528E
Casting Numbers:
Comments:
GAS, 3 GEAR
HERCULES
3.9
237
QXLDER-5
QXLDER-5
3.4375" (87.313 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
1.945
Main:
Thrust Width:
41026B, 46827E, 46828E, 46829B, 46831E, 46839E, 47830D, 49525B, 49528E
Casting Numbers:
Comments:
GAS, 5 GEAR
HERCULES
4.0
242
Stroke: 4.500" (114.3 MM)

2.2472-2.2480" (57.079-57.099 MM)
Rods:
#1 2.6222-2.6230" (66.604-66.624 MM)
Main:
Main: Numbers:
45853E, 49123
Casting
HERCULES
4.0
3.375" (85.725 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
242
WXA
3.375" (85.725 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
247
WXA

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
6 Cylinders
4.0
245
4.0
245
(cont.)
JXE
Stroke: 4.250" (107.95 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
C5145
Casting Numbers:
HERCULES
Engine Model
JXE
Cyl Bore:
Rod Fillet:
3.500" (88.9 MM)

.125" (3.175 MM)
Thrust Width:
2.131
JXC
3.500" (88.9 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
2.131
Main:
Thrust Width:
140026D, 155025E, 40091E, 40094D, 40094E, 40950E, 40991E, 42979E, 43526D, 43526E, 43531E,
Casting Numbers:
43532, 44025E, 45853D, 45855E, 45857E, 45859B, 45859D, 45868G, 46024F, 50024E
HERCULES
4.1
249
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Comments:
DIX SERIES
HERCULES
4.3
4.3
3.625" (92.075 MM)

.094" (2.388 MM)
Thrust Width:
1.475
260
Stroke: 4.500" (114.3 MM)

2.4970-2.4980" (63.424-63.449 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
76613, 766130D, 76614, 76615D
Casting Numbers:
Comments:
DJ SERIES
HERCULES
DIX-6-D
Cyl Bore:
Rod Fillet:
DIX-6-D
DJXB
263
DJXB
3.500" (88.9 MM)
.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
JXB
JXB
3.625" (92.075 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
.125
Main:
Main Fillet:
2.131
Main:
Thrust Width:
19136, 19138E, 19584B, 19585B, 19585E, 42979E, 43526D, 43531E, 43532, 44025E, 45853D, 45853E,
Casting Numbers:
45855E, 45857E, 45859B, 45859D, 45868G, 46024F, 49123, 50024E
Comments:
JXB
HERCULES
4.5
272
Stroke: 4.2500" (107.95 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Comments:
DIX SERIES
HERCULES
Casting Numbers:
HERCULES
4.6
DIX-6-272
Cyl Bore:
Rod Fillet:
3.6875" (93.663 MM)

.094" (2.388 MM)
Thrust Width:
1.475
282
DIX-6-272
JXC
JXC
140026D, C5145
4.6
282
JXC
3.750" (95.25 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
.125
Main:
Main Fillet:
2.1310
Main:
Thrust Width:
155025E, 40025E, 40091E, 40094D, 40094E, 40950E, 40991E, 42979E, 43526D, 43526E, 43531E, 43532,
Casting Numbers:
45853D, 45853E, 45855E, 45857E, 45859B, 45859D, 45868G, 46024F
Comments:
JXC USES T/W ALSO
HERCULES
4.9
298
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
1.8740-1.8750" (47.6-47.625 MM)
Front
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
Comments:
DIESEL, WHITE
D-3000
D-3000
Cyl Bore:
3.7492-3.7516" (95.23-95.291 MM)
Main Fillet:
.1400-.1700
248

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
6 Cylinders
4.9
298
DH-3000
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
1.8740-1.8750" (47.6-47.625 MM)
Front
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
DH SERIES
Comments:
HERCULES
4.9
HERCULES
4.9
4.9
4.9
4.9
55-60
DJXC
3.7500" (95.25 MM)

.125" (3.175 MM)
DJXH
298
DJXH
3.750" (95.25 MM)
.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
DJXH-F
298
DJXH-F
3.750" (95.25 MM)

1/8 (.125) (NM)
Cyl Bore:
Rod Fillet:
G3000
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
Main:
Comments:
GAS
HERCULES
.156
298
Stroke: 4.500" (114.3 MM)

2.4970-2.4980" (63.424-63.449 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
76613, 766130D, 76614, 76615D
Casting Numbers:
Comments:
DJ SERIES
HERCULES
Main Fillet:
Cyl Bore:
Rod Fillet:
Stroke: 4.500" (114.3 MM)

2.4970-2.4980" (63.424-63.449 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
76613, 766130D, 76614, 76615D
Casting Numbers:
Comments:
DJ SERIES
HERCULES
3.750" (95.25 MM)
DJXC
(cont.)
DH-3000
Cyl Bore:
298
Stroke: 4.5000" (114.3 MM)

2.4970-2.4980" (63.424-63.449 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
76613, 766130D, 76614, 76615D
Casting Numbers:
Comments:
DJ SERIES
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
298
G3000
3.7492-3.7516" (95.23-95.291 MM)
.140-.170" (3.556-4.318 MM)
.140-.170
2.124-2.127 @#4
WXB
WXB
3.750" (95.25 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
HERCULES
5.2
320
JXD
Stroke: 4.250" (107.95 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
C5145
Casting Numbers:
Comments:
JXD USES T/W ALSO
HERCULES
5.2
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
320
JXD
4.000" (101.6 MM)
.125" (3.175 MM)
.125
2.131
JXC
4.000" (101.6 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
2.131
Main:
Thrust Width:
155025E, 40091E, 40094D, 40094E, 40950E, 40991E, 42979E, 43526D, 43526E, 43531E, 43532, 44025E,
Casting Numbers:
45853D, 45853E, 45855E, 45857E, 45859B, 45859D, 45868G, 46024F, 50024E
Comments:
GAS ENGINE MULTIPLE USAGE
HERCULES
5.2
Stroke: 4.250" (107.95 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
#1 2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
140026D, C5145
Casting Numbers:
320
JXD
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
2.131
249

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
6 Cylinders
5.6
339
5.6
339
5.6
DJXD
339
HERCULES
5.6
339
HERCULES
5.6
G3400
5.6
G3400
Cyl Bore:
Rod Fillet:
3.9987-4.0012" (101.567-101.63 MM)

.140-.170" (3.556-4.318 MM)
Cyl Bore:
4.000" (101.6 MM)
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.109" (2.769 MM)
Thrust Width:
1.882
JXLD
339
Stroke: 4.500" (114.3 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
220426C
Casting Numbers:
Comments:
JXLD-JR
HERCULES
DJXD
4.000" (101.6 MM)
.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
Main:
Comments:
GAS
Stroke: 4.500" (114.3 MM)

1.9870-1.9880" (50.47-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
C1046
Casting Numbers:
D-3400
3.9987-4.0011" (101.567-101.628 MM)

.140-.170" (3.556-4.318 MM)
.140-.170
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 4.500" (114.3 MM)

2.4970-2.4980" (63.424-63.449 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
76613, 766130D, 76614, 76615D
Casting Numbers:
Comments:
DJ SERIES
HERCULES
(cont.)
D-3400
Stroke: 4.500" (114.3 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.8734-2.8744" (72.984-73.01 MM)
Main:
1.8740-1.8750" (47.6-47.625 MM)
Front
4.3100-4.3150" (109.474-109.601 MM)
Rear Seal Diameter:
DIESEL
Comments:
HERCULES
Engine Model
JXLD-JR
339
WXC
WXC
4.000" (101.6 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E, 288025, 42947E, 42974E, 43528B,
Casting Numbers:
43528E, 49123, 76613, 766130D, 76614, 76615D
Comments:
WX SERIES
HERCULES
5.9
358
WXLC
WXLC
4.000" (101.6 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E, 20532E, 20536E, 20541, 20542,
Casting Numbers:
20632
Comments:
WX SERIES
HERCULES
5.9
361
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.2470-2.2480" (57.074-57.099 MM)
Rods:
Rod Fillet:
#1 2.6220-2.6230" (66.599-66.624 MM)
Main:
Main Fillet:
Main: Numbers:
19128E, 19136, 19138E, 19584B, 19585B, 19585E, 49123
Casting
HERCULES
5.9
361
4.125" (104.775 MM)

.125" (3.175 MM)
.125
WXC-2
4.125" (104.775 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
HERCULES
6.3
383
4.250" (107.95 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.2470-2.2480" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.6220-2.6230" (66.599-66.624 MM)
.125
Main:
Main Fillet:
Main: Numbers:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E, 49123
Casting
250
WXC-2

Make
Liter
CID
Vin
Model
Year
HERCULES
6 Cylinders
6.3
HERCULES
383
WXC-3
Engine Model
(cont.)
WXC-3
4.250" (107.95 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
6.6
HERCULES
404
WXLC-3
WXLC-3
4.250" (107.95 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
6.6
HERCULES
404
WXLD
WXLD
4.250" (107.95 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
6.6
HERCULES
404
WXLD-ER
WXLD-ER
4.250" (107.95 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.247-2.248" (57.074-57.099 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
2.622-2.623" (66.599-66.624 MM)
Main:
Main:
18025E, 19125E, 19128E, 19136, 19138E, 19584B, 19585B, 19585E
Casting Numbers:
Comments:
WX SERIES
7.8
HERCULES
474
Stroke: 5.250" (133.35 MM)

2.6220-2.6230" (66.599-66.624 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
16525E, 17527D
Casting Numbers:
7.8
HERCULES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
478
D-4800
Stroke: 4.880" (123.952 MM)

2.9970-2.9980" (76.124-76.149 MM)
Rods:
3.6210-3.6220" (91.973-91.999 MM)
Main:
Main:
403803000
Casting Numbers:
Comments:
NATURALLY ASPERATED
7.8
HERCULES
7.8
7.8
Casting Numbers:
HERCULES
4.5630-4.5645" (115.9-115.938 MM)
Thrust Width:
2.132
D-4800T
478
478
D5000
D5000
Cyl Bore:
4.5630-4.5645" (115.9-115.938 MM)
Thrust Width:
2.132
Cyl Bore:
Rod Fillet:
4.500" (114.3 MM)

.125" (3.175 MM)
10935419
8.2
Stroke: 5.250" (133.35 MM)

2.6220-2.6230" (66.599-66.624 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
16525E, 17527D, 17527E
Casting Numbers:
Comments:
LATE
501
D-4800T
4.5630-4.5645" (115.9-115.938 MM)
Cyl Bore:
Stroke: 4.880" (123.952 MM)

2.9970-2.9980" (76.124-76.149 MM)
Rods:
3.6210-3.6220" (91.973-91.999 MM)
Main:
Main:
403803000
Casting Numbers:
HERCULES
D-4800
Cyl Bore:
478
Stroke: 4.880" (123.952 MM)

2.9970-2.9980" (76.124-76.149 MM)
Rods:
3.6210-3.6220" (91.973-91.999 MM)
Main:
Main:
403803000
Casting Numbers:
Comments:
TURBOCHARGED
HERCULES
4.375" (111.125 MM)

.125" (3.175 MM)
.125
2.132
RXB
251

Make
Liter
CID
Vin
Model
Year
HERCULES
HERCULES
6 Cylinders
8.7
529
(cont.)
DRXC
Stroke: 5.250" (133.35 MM)

2.6220-2.6230" (66.599-66.624 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main:
16525E, 17527D, 17527E
Casting Numbers:
Comments:
Engine Model
4.500" (114.3 MM)

.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
EARLY
HERCULES
8.7
529
RXC
RXC
RXC
4.6250" (117.475 MM)

Stroke: 5.2500"(133.350 MM)
Cyl Bore:
FRONT 3.0000" (76.200 MM) LENGTH 1.9375" (49.
Main 1:
INTR 3.0000" (76.200 MM) LENGTH 1.3750" (34.925 M
Main:
Main 2:
CNTR 3.0000" (76.200 MM) LENGTH 2.8750" (73.025 M
Main 3:
REAR 3.0000" (76.200 MM) LENGTH 2.9375" (74.612
Main 4:
Comments:
FIRE TRUCK OR MARINE * ROD BEARING BRASS BACKED SHELL .0025-.0040" (.063-.101 MM), STEEL
BACKED SHELL .0020-.0030" (.050-.076 MM), COPPER BACKED SHELL .0040-.0045" (.101-.114 MM), MAINS
.0045-.0055" (.114-.139 MM) INSERT LEAD SHELL
HERCULES
9.1
558
Stroke: 5.250" (133.35 MM)

2.6220-2.6230" (66.599-66.624 MM)
Rods:
#1 2.9970-2.9980" (76.124-76.149 MM)
Main:
Main: Numbers:
16525E, 17527D, 17527E
Casting
Cyl Bore:
Rod Fillet:
Main Fillet:
4.750" (120.65 MM)

.125" (3.175 MM)
.125
HERCULES
HERCULES
8 Cylinders
24.1
1468
DNX-V8D
Stroke: 6.000" (152.4 MM)

3.624-3.625" (92.05-92.075 MM)
Rods:
4.499-4.500" (114.275-114.3 MM)
Main:
Main:
STANDARD
Comments:
HERCULES
24.1
1,468
DNX-V8DS
Stroke: 6.000" (152.4 MM)

3.624-3.625" (92.05-92.075 MM)
Rods:
4.499-4.500" (114.275-114.3 MM)
Main:
Main:
Comments:
SUPERCHARGED
4 Cylinders
1.2
71
Stroke: 3.740" (94.996 MM)

1.6245-1.6250" (41.262-41.275 MM)
Rods:
#1 1.7495-1.7500" (44.437-44.45 MM)
Main:
Main:
S5513
Casting Numbers:
HILLMAN
1.3
77
1.4
85
1.5
91
1.6
97
Thrust Width:
1.8508
Cyl Bore:
Rod Fillet:
2.480" (62.992 MM)

.125" (3.175 MM)
Thrust Width:
1.8510
Cyl Bore:
Rod Fillet:
3.000" (76.2 MM)

1/8
Cyl Bore:
Rod Fillet:
3.110" (78.994 MM)

1/8
48-57
55-65
Stroke: 3.000" (76.2 MM)

1.8755-1.8760" (47.638-47.65 MM)
Rods:
#1 2.2490-2.2495" (57.125-57.137 MM)
Main:
Main:
C22109
Casting Numbers:
HILLMAN
2.480" (62.992 MM)

1/8
Stroke: 3.000" (76.2 MM)

1.8755-1.8760" (47.638-47.65 MM)
Rods:
#1 2.2490-2.2495" (57.125-57.137 MM)
Main:
Main:
C22109
Casting Numbers:
HILLMAN
37-53
Cyl Bore:
Rod Fillet:
Stroke: 3.740" (94.996 MM)

1.6245-1.6250" (41.262-41.275 MM)
Rods:
#1 1.7495-1.7500" (44.437-44.45 MM)
Main:
Main:
S5634
Casting Numbers:
HILLMAN
DNX-V8DS
6.250" (158.75 MM)
Cyl Bore:
HILLMAN
HILLMAN
DNX-V8D
6.250" (158.75 MM)
Cyl Bore:
57-61
Stroke: 3.000" (76.2 MM)

2.0005-2.0010" (50.813-50.825 MM)
Rods:
#1 2.2490-2.2495" (57.125-57.137 MM)
Main:
Main:
15527ZZ163, 199045H
Casting Numbers:
Comments:
1592 CC, USED BY SUNBEAM THRUST WASHERS
ALPINE
Cyl Bore:
Rod Fillet:
252
61-65
3.208" (81.483 MM)

.125" (3.175 MM)

Make
Liter
CID
Vin
Model
Year
HILLMAN
HILLMAN
4 Cylinders
1.7
105
Stroke: 3.252" (82.601 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
#1 2.3740-2.3745" (60.3-60.312 MM)
Main:
Main:
H6601861
Casting Numbers:
66-70
3.2102-3.2106" (81.539-81.549 MM)
Thrust Width:
1.629"
4 Cylinders
3.8
234
Stroke: 4.449" (113.000 MM)

2.4385-2.4394" (61.938-61.961 MM)
Rods:
2.8715-2.8724" (72.936-72.959 MM)
Main:
Main:
DIESEL
Comments:
W04C-T
6 Cylinders
6.0
364
Stroke: 4.6457" (118.001 MM)

2.4386-2.4394" (61.940-61.960 MM)
Rods:
2.8717-2.8724" (72.940-72.980 MM)
Main:
Main:
FD DIESEL 16 SERIES NON TURBO
Comments:
HINO
6.4
6.5
393
6.7
HINO
Stroke:
Rods:
7.8
HINO
9.4
HO7
EL100
Rod Width:
1.6930" (43.000 MM)
Thrust Width:
1.8110" @ #4
J08
HO7C
02-03
J08
4.4882-4.4900" (114.000-114.046 MM)
Cyl Bore:
575
HO6
EL100
4.5669" (116.000 MM)
EM100
81-90
4.8819" (124. MM)
Cyl Bore:
HONDA
HONDA
84-90
Cyl Bore:
486
Stroke: 5.118" (129.997 MM)

2.9507-2.9517" (74.948-74.973 MM)
Rods:
#1 3.5147-3.5157" (89.273-89.299 MM)
Main:
Main:
13411-15
Casting Numbers:
Comments:
TRUCK
85-96
4.3307" (110. MM)
Cyl Bore:
Stroke: 5.120"( 130.000 MM)

2.5567-2.5675"
Rods:
3.1472-3.1480"
Main:
Main:
Comments:
DIESEL, J08C-TP & J08C-TR, 24 VALVE OHC
EH700
4.2520" (108.001 MM)
411
3.5433" (90.000 MM)

Main:
Main:
Comments:
DIESEL
8.0
HO6
480
W06E
4.3307" (110. MM)
Cyl Bore:
4.8820" (124.000 MM)

2.8740" (73.000 MM)
HINO
EH700
396
Stroke: 4.6457" (118.001 MM)

2.5564-2.5575" (64.933-64.961 MM)
Rods:
3.1470-3.1480" (79.934-79.959 MM)
Main:
Main:
Comments:
HO7C DIESEL FD17
86-87
4.0945" (104. MM)
Cyl Bore:
Stroke: 4.6457" (118.001 MM)

2.5564-2.5574" (64.933-64.958 MM)
Rods:
3.1470-3.1480" (79.934-79.959 MM)
Main:
Main:
Comments:
DIESEL STRAIGHT NOSE CRANK.
HINO
W06E
Cyl Bore:
Stroke: 4.4488" (113. MM)

2.5564-2.5575" (64.933-64.961 MM)
Rods:
3.1470-3.1480" (79.934-79.959 MM)
Main:
Main:
Comments:
EH700 DIESEL
HINO
88-92
4.0945" (104.000 MM)
Cyl Bore:
HINO
HINO
(cont.)
Cyl Bore:
HINO
HINO
Engine Model
1 Cylinder
0.3
16
GX270
3.0315" (77.000 MM)

Stroke: 2.283" (58.000 MM)
Cyl Bore:
1.2986" (32.985 MM)
Rods:
GENERATOR, 4STROKE, OHV, AIR-COOLED, 9HP HORIZONTAL CRANK WITH THE CYLINDER INCLINED
Comments:
25r
253
GX270

Make
Liter
CID
Vin
Model
Year
HONDA
HONDA
1 Cylinder
0.3
16
GXV270
Stroke: 2.280" (58.000 MM)

Cyl Bore:
1.2986" (32.985 MM)
Rods:
GENERATOR,4STROKE,OHV,AIR- COOL,9HP,VERTICAL CRANK
Comments:
HONDA
Engine Model
0.3
21
(cont.)
GXV270
3.030" (77.000 MM)
GX340
GX340
3.230" (82.000 MM)

Stroke: 2.520" (64.000 MM)
Cyl Bore:
1.4167" (35.985 MM)
Rods:
Comments:
GENERATOR, 4STROKE, OHV, AIR-COOLED, 11HP HORIZONTAL CRANKSHAFT ENGINE WITH THE
CYLINDER INCLINED 25r
HONDA
0.3
21
GXV340
Stroke: 2.520" (64.000 MM)

Cyl Bore:
1.4167" (35.985 MM)
Rods:
Comments:
GENERATOR,4STROKE,OHV,AIR-COOL,11HP,VERTICAL CRANK
HONDA
0.4
24
GXV340
3.230" (82.000 MM)
GX390
GX390
3.460" (88.000 MM)

Stroke: 2.520" (64.000 MM)
Cyl Bore:
1.4167" (35.985 MM)
Rods:
Comments:
GENERATOR, 4-STROKE, OHV, AIR COOLED, 13HP HORIZONTAL CRANKSHAFT ENGINE WITH THE
CYLINDER INCLINED 25r.
HONDA
0.4
24
GXV390
Stroke: 2.520" (64.000 MM)

Cyl Bore:
1.4167" (35.985 MM)
Rods:
Comments:
GENERATOR,4STROKE,OHV,AIR-COOL,13HP,VERTICAL CRANK
HONDA
HONDA
4 Cylinders
1.2
75
EB1
Stroke: 2.992" (75.997 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
SOHC, 2BC, 1169CC
Comments:
HONDA
1.2
1.2
75
EB2
75
1.3
73-79
CIVIC
EB3
74-77
EB2
2.835" (72.009 MM)
CIVIC
78-79
EB3
2.835" (72.009 MM)
Cyl Bore:
79
EB1
2.835" (72.009 MM)
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 2BC, 1237CC
HONDA
CIVIC
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 2BC, 1237CC
HONDA
GXV390
3.460" (88.000 MM)
CIVIC
04-05
2.8740-2.8748" (73.000-73.020 MM)
Cyl Bore:
1.5739-1.5748" (39.976-40.000 MM)

Rods:
1.9676-1.9685" (49.976-50.000 MM)
Main:
Main:
Comments:
CIVIC, 1.3L HYBRID
HONDA
1.3
79
EJ
Stroke: 3.228" (81.991 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 3BC, CIVIC 1300 CVCC
HONDA
1.3
79
HONDA
1.3
79
81-83
2.835" (72.009 MM)
Cyl Bore:
2.835" (72.009 MM)
Cyl Bore:
2.835" (72.009 MM)
EJ1
Stroke: 3.228" (81.991 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
3.150" (80.01 MM)
Main:
Rear Seal Diameter:
Comments:
3BC
Stroke: 3.228" (81.991 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
3BC
CIVIC
Cyl Bore:
78-80
EJ1
83
Thrust Width:
254
@ #4
EJ
EJ1
EJ1

Make
Liter
CID
Vin
Model
HONDA
HONDA
4 Cylinders
1.3
79
D13A2
Stroke: 3.071" (78.003 MM)

1.5739-1.5748" (39.977-40. MM)
Rods:
1.7707-1.7717" (44.976-45.001 MM)
Main:
Main:
3BC
Comments:
HONDA
1.3
82
1.3
HONDA
1.5
EV1
1.5
91
HONDA
1.5
91
1.5
91
1.5
91
1.5
91
HONDA
1.5
91
1.5
91
77-79
Thrust Width:
1.025" (26.035 MM)
CIVIC
CIVIC
EM1
255
78-79
ED4
ED3
78-79
ED4
80-80
EM1
2.913" (73.99 MM)
CIVIC
Cyl Bore:
ED4
2.913" (73.99 MM)
CIVIC
EM1
ED3
2.913" (73.99 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 3BC, 8 VALVE HEAD, CIVIC 1500
76-79
2.913" (73.99 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
HONDA
CIVIC
ED4
ED1
2.913" (73.99 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
76-79
Cyl Bore:
ED3
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
3BC, CIVIC
HONDA
CIVIC
ED4
75-75
2.913" (73.99 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
HONDA
CIVIC
ED4
EV1
2.913" (73.99 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
HONDA
CIVIC
Cyl Bore:
ED3
EV1
@ #3
85-87
ED1
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
84
3.150" (80.01 MM)
Cyl Bore:
91
D13A2
3.150" (80.01 MM)
Thrust Width:
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 3BC, CIVIC 1500 CVCC, ED1 & 2
HONDA
CIVIC
Cyl Bore:
82
(cont.)
87
EV1
Stroke: 3.583" (91.008 MM)

1.4951-1.4961" (37.976-38.001 MM)
Rods:
1.7707-1.7717" (44.976-45.001 MM)
Main:
Main:
Comments:
3BC
Engine Model
2.9122-2.9130" (73.97-73.99 MM)
Cyl Bore:
Stroke: 3.583" (91.008 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
3BC, CIVIC
HONDA
Year
81-82
2.913" (73.99 MM)
EM1

Make
Liter
CID
Vin
Model
HONDA
HONDA
4 Cylinders
1.5
91
EM1
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9687-1.9697" (50.005-50.03 MM)
Main:
Main:
3BC, CIVIC
Comments:
HONDA
1.5
1.5
91
EW1
91
1.5
91
HONDA
1.5
91
HONDA
1.5
1.5
91
CIVIC
1.5
91
2.913" (73.99 MM)
Thrust Width:
1.042 @ #4
CIVIC
2.913" (73.99 MM)
Thrust Width:
1.042 @ #4
CIVIC
HONDA
1.5
D15B7
HONDA
1.5
Stroke: 3.327" (84.506 MM)

1.6522-1.6528" (41.966-41.981 MM)
Rods:
1.6522-1.6528" (41.966-41.981 MM)
Main:
Main:
Comments:
SOHC, VTEC-E, 16 VALVE, CIVIC
CIVIC
D15B8
88-91
CIVIC
D15Z1
@ #3
256
88-91
D15B2
2.9526-2.9535" (74.996-75.019 MM)
@ #3
92-95
D15B7
92-95
D15B8
2.9528" (75.001 MM)
CIVIC
Cyl Bore:
D15B1
2.9526-2.9535" (74.996-75.019 MM)
Cyl Bore:
91
D15A2
2.9526-2.9535" (74.996-75.019 MM)
CIVIC
Cyl Bore:
91
87-91
EW3
2.913" (73.99 MM)
CIVIC
D15B2
EW4
85-86
Cyl Bore:
D15B1
Stroke: 3.327" (84.506 MM)

1.6522-1.6528" (41.966-41.981 MM)
Rods:
1.7707-1.7718" (44.976-45.004 MM)
Main:
Main:
Comments:
SOHC, MFI, 8 VALVE, CIVIC
EW1
84-87
Cyl Bore:
Stroke: 3.330" (84.582 MM)

Cyl Bore:
1.6525-1.6535" (41.974-41.999 MM)
Rods:
1.7707-1.7717" (44.976-45.001 MM)
Main:
Main:
Thrust Width:
Comments:
SOHC, TBI, 16 VALVE HEAD * JOURN 1 & 5 OIL CLEAR: .0007-.0014
HONDA
84-87
1.042 @ #3
D15A2
Stroke: 3.327" (84.506 MM)

1.6535-1.6528" (41.999-41.981 MM)
Rods:
1.7707-1.7718" (44.976-45.004 MM)
Main:
Main:
Comments:
SOHC, MFI, 16 VALVE, CIVIC
@ #4
Thrust Width:
Stroke: 3.330" (84.582 MM)

Cyl Bore:
1.4951-1.4961" (37.976-38.001 MM)
Rods:
1.7707-1.7717" (44.976-45.001 MM)
Main:
Main:
Thrust Width:
Comments:
SOHC, TBI, 8 VALVE HEAD * JOURN 1 & 5 OIL CLEAR: .0007-.0014
HONDA
EM1
2.9131-2.9142" (73.993-74.021 MM)
Cyl Bore:
91
83
CIVIC
EW3
Stroke: 3.386" (86.004 MM)

1.6522-1.6528" (41.966-41.981 MM)
Rods:
1.7709-1.7717" (44.981-45.001 MM)
Main:
Main:
Comments:
3BC, CIVIC
(cont.)
Cyl Bore:
EW4
Stroke: 3.401" (86.385 MM)

1.6526-1.6532" (41.976-41.991 MM)
Rods:
#1 1.9676-1.9685" (49.977-50. MM)
Main:
Main:
1.215-1.220" (30.861-30.988 MM)
3.144-3.149" (79.858-79.985 MM)
Rear Seal Diameter:
Comments:
EFI, CIVIC, 12 VALVE, CRX SI
Engine Model
2.913" (73.99 MM)
Thrust Width:
Stroke: 3.401" (86.385 MM)

1.6526-1.6532" (41.976-41.991 MM)
Rods:
#1 1.9676-1.9685" (49.977-50. MM)
Main:
Main:
1.215-1.220" (30.861-30.988 MM)
3.144-3.149" (79.858-79.985 MM)
Rear Seal Diameter:
Comments:
SOHC, EFI, CIVIC, 12 VALVE
HONDA
CIVIC
Cyl Bore:
Stroke: 3.401" (86.385 MM)

1.6526-1.6532" (41.976-41.991 MM)
Rods:
#1 1.9676-1.9685" (49.977-50. MM)
Main:
Main:
1.215-1.220" (30.861-30.988 MM)
3.144-3.149" (79.858-79.985 MM)
Rear Seal Diameter:
Comments:
3BC, CIVIC, CRX, 12 VALVE HEAD
HONDA
Year
92-95
D15Z1
2.9528-2.9535" (75.001-75.019 MM)

Make
Liter
CID
Vin
Model
HONDA
HONDA
Year
4 Cylinders
1.5
91
EW1
CRX
Engine Model
(cont.)
85-87
EW1
2.9131-2.9142" (73.993-74.021 MM)

Stroke: 3.401" (86.385 MM)
Cyl Bore:
1.4950-1.4955" (37.973-37.986 MM)
Rods:
#1 1.6520-1.6530" (41.961-41.986 MM)
Main:
1.042 @ #3
Main:
Thrust Width:
1.215-1.220" (30.861-30.988 MM)
3.144-3.149" (79.858-79.985 MM)
Rear Seal Diameter:
3BC, CRX HF (HIGH FUEL), 8 VALVE HEAD THIS IS A LIMITED PRODUCTION ENGINE, SOME A/M
Comments:
BEARING MANUALS DO NOT EVEN LIST THESE DIAMETERS
HONDA
1.5
91
D15B6
Stroke: 3.346" (84.988 MM)

1.4951-1.4961" (37.976-38.001 MM)
Rods:
1.7709-1.7717" (44.981-45.001 MM)
Main:
Main:
Comments:
SOHC, 8 VALVE, MFI, CRX HF (HIGH FUEL), CIVIC,
HONDA
1.5
91
1.5
91
1.6
97
HONDA
1.6
97
1.6
97
Cyl Bore:
2.913" (73.99 MM)
75-76
87
CIVIC
Thrust Width:
D16Z6
CIVIC
CIVIC
Stroke: 3.0470" (77.394 MM)

Cyl Bore:
1.7707-1.7717" (44.976-45.001 MM)
Rods:
OTHRS 2.1644-2.1654" (54.976-55.001 MM)
Main 1:
#3 2.1642-2.1651" (54.971-54.994 MM)
Main:
Main 2:
Comments:
DOHC, VTEC, 16 VALVE, CIVIC,DEL SOL * #3 OIL CLR: .0012-.0019
HONDA
1.6
97
B16A2
Stroke: 3.034" (77.064 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
#1,2,4,5 2.1644-2.1654" (54.976-55.000 MM)
Main 1:
#3 2.1642-2.1651" (54.970-54.994 MM)
Main:
Main 2:
Comments:
DOHC, MFI, VTEC, CIVIC SI, DEL SOL
HONDA
1.6
97
HONDA
1.6
97
CIVIC
D16Y5
CIVIC
D16Y7
CIVIC
Cyl Bore:
257
@ #3
92-95
D16Z6
95-00
B16A3
3.1890" (81.001 MM)
96-00
B16A2
96-00
D16Y5
2.950" (74.93 MM)
Cyl Bore:
Stroke: 3.540" (89.916 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
SOHC, NON-VTEC, 16 VALVE, 1590 CC, 106 HP
D16A6
3.189-3.190" (81.000-81.020 MM)
Cyl Bore:
Stroke: 3.540" (89.916 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
SOHC, VTEC, 16 VALVE, CIVIC HX 3DR
D15A3
2.9528-2.9535" (75.001-75.019 MM)
Cyl Bore:
B16A3
88-91
ED2
2.9526-2.9535" (74.996-75.019 MM)
Cyl Bore:
Stroke: 3.5433" (90. MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
SOHC, VTEC, 16 VALVE, 1590 CC'S, 125 HP, CIVIC
HONDA
2.913" (73.99 MM)
D16A6
Stroke: 3.543" (89.992 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
6-4-A
Casting Numbers:
Comments:
SOHC, 16V, MFI, CIVIC, 4WD WAGON, CRX SI
D15B6
Cyl Bore:
D15A3
Stroke: 2.386" (60.604 MM)

1.6522-1.6528" (41.966-41.981 MM)
Rods:
1.7709-1.7717" (44.981-45.001 MM)
Main:
Main:
Comments:
EFI
HONDA
88-91
2.9526-2.9535" (74.996-75.019 MM)
ED2
Stroke: 3.386" (86.004 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
3BC
HONDA
CRX
Cyl Bore:
96-00
2.950" (74.93 MM)
D16Y7

Make
Liter
CID
Vin
Model
Year
HONDA
HONDA
4 Cylinders
1.6
97
D16Y8
Stroke: 3.543" (89.992 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
SOHC, VTEC, 16 VALVE, CIVIC
Comments:
HONDA
1.6
98
1.6
98
1.7
102
1.8
1.8
107
1.8
107
1.8
107
1.8
110
HONDA
1.8
EK1
A18A1
HONDA
1.8
ES2
81-82
83-83
Thrust Width:
258
EK1
EK1
@ #4
87
A18A1
3.150" (80.01 MM)
83-84
ES1
3.150" (80.01 MM)
@ #4
ACCORD
Cyl Bore:
EK1
3.032" (77.013 MM)
Thrust Width:
112
EK1
3.032" (77.013 MM)
ACCORD
Cyl Bore:
Stroke: 3.583" (91.008 MM)

1.7707-1.7716" (44.976-44.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
SOHC, 3BC, CVCC ACCORD 1984, PRELUDE
80-80
ACCORD
ES1
D17A1
3.032" (77.013 MM)
Thrust Width:
Stroke: 3.583" (91.008 MM)

1.7707-1.7716" (44.976-44.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
2-1BC ACCORD NO JET VALVES
79-80
ACCORD
Cyl Bore:
EF1
3.032" (77.013 MM)
ACCORD
Cyl Bore:
Cyl Bore:
112
01-03
ACCORD
EK1
Stroke: 3.583" (91.008 MM)

1.7707-1.7716" (44.976-44.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
2-1BC, ACCORD, PRELUDE
EF1
2.9528-2.9535" (75.000-75.020 MM)
ACCORD
EK1
Stroke: 3.701" (94.005 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9687-1.9697" (50.005-50.03 MM)
Main:
Main:
Comments:
SOHC, 3BC, CVCC ACCORD, PRELUDE
HONDA
CIVIC
Cyl Bore:
107
D16Y8
76-78
Cyl Bore:
Stroke: 3.701" (94.005 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 3BC, CVCC ACCORD, PRELUDE
HONDA
2.913" (73.99 MM)
EK1
Stroke: 3.701" (94.005 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 3BC, ACCORD CVCC
HONDA
Cyl Bore:
(cont.)
76-77
Cyl Bore:
Stroke: 3.701" (94.005 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
HONDA
2.913" (73.99 MM)
D17A1
Stroke: 3.720" (94.400 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
2.1644-2.1654" (54.975-55.000 MM)
Main:
Main:
Comments:
SOHC, MFI, CIVIC DX/LX
HONDA
Cyl Bore:
EF1
Stroke: 3.661" (92.989 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
HONDA
96-03
2.953" (75.006 MM)
EF1
Stroke: 3.661" (92.989 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
HONDA
CIVIC
Cyl Bore:
Engine Model
83-84
3.150" (80.01 MM)
@ #4
ES2

Make
Liter
CID
Vin
Model
Year
HONDA
HONDA
4 Cylinders
1.8
112
ES3
ACCORD
Stroke: 3.583" (91.008 MM)

Cyl Bore:
1.7707-1.7716" (44.976-44.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
SOHC, EFI, 12 VALVE, ACCORD SEI, WITH JET VALVES
Comments:
HONDA
1.8
112
ET2
Stroke: 3.583" (91.008 MM)

1.7707-1.7716" (44.976-44.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
SOHC, 2BC, 12 VALVE, ACCORD NO JET VALVES
HONDA
2.0
119
HONDA
2.0
HONDA
2.0
HONDA
2.0
119
2.0
119
2.0
2.0
2.0
@ #3
B20A3
122
Stroke: 3.3858" (86.000 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
#1,2,4,5 2.1647-2.1657" (54.984-55.008 MM)
Main 1:
#3 2.1644-2.1654" (54.976-55.000 MM)
Main:
Main 2:
Comments:
DOHC, I-VTEC, PGM, FI, CIVIC SI COUPE
CRV
CRV
@ #3
CIVIC
Cyl Bore:
259
88-91
B20A3
@ #3
97-98
B20B4
99-01
B20Z2
3.307-3.308" (84.000-84.020 MM)
Cyl Bore:
K20A3
B20A5
3.307-3.308" (84.000-84.020 MM)
Cyl Bore:
B20Z2
87-91
3.189" (81.001 MM)
Thrust Width:
120
@ #3
PRELUDE
B20B4
A20A3
3.1890-3.1898" (81.001-81.021 MM)
Cyl Bore:
120
87-89
PRELUDE
Thrust Width:
119
A20A1
3.2559-3.2566" (82.7-82.718 MM)
Cyl Bore:
Stroke: 3.500" (89.000 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
#1,2,4,5 2.1644-2.1654" (54.976-55.000 MM)
Main 1:
#3 2.1642-2.1651" (54.970-54.994 MM)
Main:
Main 2:
Comments:
DOHC, MFI, TRUCK CR-V
HONDA
87-89
Thrust Width:
Stroke: 3.500" (89.000 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
#1,2,4,5 2.1644-2.1654" (54.976-55.000 MM)
Main 1:
#3 2.1642-2.1651" (54.970-54.994 MM)
Main:
Main 2:
Comments:
DOHC, SFI, 1973 CC, TRUCK CR-V
HONDA
@ #4
ACCORD
B20A5
BS1
3.2559-3.2566" (82.7-82.718 MM)
Cyl Bore:
Stroke: 3.740" (94.996 MM)

1.7707-1.7716" (44.976-44.999 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
SOHC, MFI, PRELUDE, 12 VALVE
HONDA
85-86
ACCORD
A20A3
ET2
3.250" (82.55 MM)
Thrust Width:
Stroke: 3.740" (94.996 MM)

1.8888-1.8898" (47.976-48.001 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
DOHC, MPI, PRELUDE
HONDA
ACCORD
Cyl Bore:
Stroke: 3.580" (90.932 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
#1 1.9676-1.9685" (49.977-50.000 MM)
Main 1:
2,4,5 1.9673-1.9683" (49.969-49.995 MM)
Main:
Main 2:
#3 1.9671-1.9680" (49.964-49.987 MM)
Main 3:
Comments:
SOHC, MFI, 12 VALVE, ACCORD, PRELUDE
84-86
@ #4
Thrust Width:
A20A1
ES3
3.150" (80.01 MM)
Thrust Width:
119
85-85
PRELUDE
Cyl Bore:
Stroke: 3.580" (90.932 MM)

1.7707-1.7717" (44.976-45.001 MM)
Rods:
1.9676-1.9685" (49.977-50. MM)
Main:
Main:
Comments:
SOHC, 2BC, ACCORD
(cont.)
3.150" (80.01 MM)
Cyl Bore:
BS1
Stroke: 3.580" (90.932 MM)

1.7707-1.7716" (44.976-44.999 MM)
Rods:
#1 1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
SOHC, EFI, 3BC, BT2, BS2, ACCORD
Engine Model
02-05
K2OA3
3.3858-3.3866" (86.000-86.020 MM)

Make
Liter
CID
Vin
Model
Year
HONDA
HONDA
4 Cylinders
2.0
122
F20C1
Stroke: 3.307" (84.000 MM)

1.8888-1.8898" (47.976-48.000 MM)
Rods:
2.1644-2.1654" (54.976-55.000 MM)
Main:
Main:
DOHC, MFI, VTEC, S2000
Comments:
HONDA
2.1
125
B21A1
Stroke: 3.740" (94.996 MM)

1.8888-1.8890" (47.976-47.981 MM)
Rods:
2.1644-2.1654" (54.976-55.001 MM)
Main:
Main:
Comments:
DOHC, MFI, PRELUDE
HONDA
2.2
132
F22A1
2.2
132
F22A1
HONDA
2.2
132
F22B1
HONDA
2.2
132
F22B2
Stroke: 3.740" (94.996 MM)

1.8888-1.8897" (47.976-47.998 MM)
Rods:
1 & 4 1.9679-1.9688" (49.985-50.008 MM)
Main 1:
2 1.9676-1.9685" (49.977-50. MM)
Main:
Main 2:
3 1.9673-1.9683" (49.969-49.995 MM)
Main 3:
5 1.9680-1.9690" (49.987-50.013 MM)
Main 4:
Comments:
SOHC, 16 VALVE, MFI, ACCORD
HONDA
2.2
132
F22B6
Stroke: 3.740" (94.996 MM)

1.8888-1.8897" (47.976-47.998 MM)
Rods:
1 & 4 1.9679-1.9688" (49.985-50.008 MM)
Main 1:
2 1.9676-1.9685" (49.977-50. MM)
Main:
Main 2:
3 1.9673-1.9683" (49.969-49.995 MM)
Main 3:
5 1.9680-1.9690" (49.987-50.013 MM)
Main 4:
Comments:
SOHC, 16 VALVE, MFI, ACCORD
HONDA
2.2
132
H22A1
Stroke: 3.5700" (90.678 MM)

1.8888-1.8898" (47.976-48.001 MM)
Rods:
1.9676-1.9690" (49.977-50.013 MM)
Main:
Main:
Comments:
DOHC VTEC PRELUDE
HONDA
2.2
Stroke: 3.570" (90.700 MM)

1.8888-1.8898" (47.976-48.001 MM)
Rods:
1.9676-1.9690" (49.976-50.012 MM)
Main:
Main:
Comments:
DOHC, VTEC, MFI, PRELUDE
132
90-91
92-93
94-97
94-97
94-97
92-96
3.4248-3.4253" (86.99-87.003 MM)
Thrust Width:
1.070" (27.178 mm)
PRELUDE
260
F22B1
F22B2
F22B6
3.3465-3.3472" (85.001-85.019 MM)
PRELUDE
Cyl Bore:
F22A1
3.346" (84.988 MM)
Cyl Bore:
H22A4
F22A1
3.346" (84.988 MM)
ACCORD
Cyl Bore:
B21A1
3.3465-3.3472" (85.001-85.019 MM)
ACCORD
Cyl Bore:
90-91
3.3465-3.3472" (85.001-85.019 MM)

.0937" (2.38 MM)
.0937
1.071 @ #4
ACCORD
Cyl Bore:
F20C1
3.2677-3.2685" (83.-83.02 MM)
ACCORD
Stroke: 3.740" (94.996 MM)

Cyl Bore:
1.8888-1.8897" (47.976-47.998 MM)
Rods:
1 & 2 1.9676-1.9685" (49.977-50. MM)
Main 1:
3 1.9674-1.9683" (49.972-49.995 MM)
Main:
Main 2:
4 & 5 1.9676-1.9688" (49.977-50.008 MM)
Main 3:
Comments:
SOHC, MFI, F22A4, F22A6, ACCORD, PRELUDE, 16 VALVE
Stroke: 3.740" (94.996 MM)

1.8888-1.8897" (47.976-47.998 MM)
Rods:
1 & 4 1.9679-1.9688" (49.985-50.008 MM)
Main 1:
2 1.9676-1.9685" (49.977-50. MM)
Main:
Main 2:
3 1.9673-1.9683" (49.969-49.995 MM)
Main 3:
5 1.9680-1.9690" (49.987-50.013 MM)
Main 4:
Comments:
SOHC, VTEC, 16 VALVE, MFI, ACCORD
00-02
ACCORD
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
3.4252-3.4260" (87.000-87.020 MM)
PRELUDE
Cyl Bore:
Stroke: 3.740" (94.996 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
1 & 2 1.9676-1.9685" (49.977-50. MM)
Main 1:
3 1.9674-1.9683" (49.972-49.995 MM)
Main:
Main 2:
4 & 5 1.9676-1.9688" (49.977-50.008 MM)
Main 3:
1.5745" (39.992 MM)
3.1480" (79.959 MM)
Rear Seal Diameter:
Comments:
SOHC, 16 VALVE, F22A1, F22A4, MFI, ACCORD
HONDA
S2000
Cyl Bore:
Engine Model
97-01
H22A1
H22A4
3.4252-3.4260" (87.000-87.020 MM)

Make
Liter
CID
Vin
Model
Year
HONDA
HONDA
Stroke:
Rods:
4 Cylinders
2.2
134
3.7244" (94.600 MM)

1.9279-1.9287" (48.970-48.988 MM)
PASSPORT
Engine Model
(cont.)
98-00
Cyl Bore:
3.3848-3.3868" (58.675-86.025 MM)
Rod Width:
1.0417-1.0465" (26.460-26.580 MM)
2.2824-2.2833" (57.974-57.995 MM)

Main:
Main:
DOHC, SFI, ISUZU ENGINE, PASSPORT
Comments:
HONDA
2.3
138
F23A1
Stroke: 3.820" (97.000 MM)

1.7707-1.7717" (44.976-45.000 MM)
Rods:
1-4 2.1646-2.1655" (54.980-55.004 MM)
Main 1:
5 2.1650-2.1660" (54.992-55.016 MM)
Main:
Main 2:
Comments:
SOHC, MFI, ALSO F23A4, F23A5, F23A7
HONDA
2.3
138
2.3
138
2.3
140
HONDA
2.4
144
2.6
158
97-98
PRELUDE
3.4250-3.4260" (86.995-87.02 MM)
Cyl Bore:
3.520" (89.408 MM)
ACCORD
H23A1
4ZE1
03-05
PASSPORT
Cyl Bore:
4ZD1
K24A4
3.4252-3.4260" (87.000-87.020 MM)
94-97
4ZE1
3.650" (92.71 MM)
HONDA
6 Cylinders
2.7
163
C27A4
Stroke: 3.740" (94.996 MM)

2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
Balance: Internal
SOHC, 24 VALVE, MFI, ACCORD STEEL CRANK
Comments:
HONDA
H23A4
94-98
Cyl Bore:
Stroke: 3.740" (94.996 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Comments:
PFI, PASSPORT
HONDA
92-95
Cyl Bore:
K24A4
Stroke: 3.898" (99.000 MM)

1.8888-1.8898" (47.976-48.000 MM)
Rods:
#1,2,4,5 2.1647-2.1657" (54.984-55.008 MM)
Main 1:
#3 2.1644-2.1654" (54.976-55.000 MM)
Main:
Main 2:
Comments:
DOHC, MFI, I-VTEC, ACCORD
HONDA
3.4250-3.4260" (86.995-87.020 MM)
4ZD1
Stroke: 3.543" (89.992 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Comments:
CARBURETED, ISUZU 4ZD1 ENGINE
F23A1
Cyl Bore:
H23A1
Stroke: 3.740" (94.996 MM)

1.8888-1.8889" (47.976-47.978 MM)
Rods:
V1-2 1.9676-1.9685" (49.977-50. MM)
Main 1:
3 1.9674-1.9683" (49.972-49.995 MM)
Main:
Main 2:
4 1.9679-1.9688" (49.985-50.008 MM)
Main 3:
5 1.9680-1.9690" (49.987-50.013 MM)
Main 4:
F75EAE, F75E-AE
Casting Numbers:
Comments:
DOHC, 2300 CC, 160 HP, PRELUDE
HONDA
98-03
3.3858-3.3866" (86.000-86.020 MM)
H23A4
Stroke: 3.740" (94.996 MM)

V1-2 1.9676-1.9685" (49.977-50.000 MM)
Main 1:
3 1.9674-1.9683" (49.972-49.995 MM)
Main:
Main 2:
4 1.9679-1.9688" (49.985-50.008 MM)
Main 3:
5 1.9680-1.9690" (49.987-50.013 MM)
Main 4:
Comments:
DOHC, MFI, 195 HP
HONDA
ACCORD
Cyl Bore:
3.0
Stroke: 3.390" (86.000 MM)

2.0857-2.0866 (52.976-53.000 MM)
Rods:
2.8337-2.8346 (71.976-72.000 MM)
Main:
Main:
Comments:
SOHC, VTEC, ACCORD
183
ACCORD
Cyl Bore:
ACCORD
Cyl Bore:
261
C27A4
@ #3
Thrust Width:
J30A1
95-97
3.4252-3.4260" (87.-87.02 MM)
98-04
J30A1
3.3858-3.3864" (86.000-86.015 MM)

Make
Liter
CID
Vin
Model
Year
HONDA
6 Cylinders
3.2
HONDA
193
Stroke: 3.031" (76.987 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.919-63.932 MM)
Main:
Main:
Balance: Internal
2924, KN224
Casting Numbers:
Comments:
PASSPORT
Cyl Bore:
Thrust Width:
94-02
Engine Model
(cont.)
6VD1-W
3.6772" (93.401 MM)
@ #3
DOHC, PASSPORT
HONDA
3.2
193
Stroke: 3.031" (76.987 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.919-63.932 MM)
Main:
Main:
Balance: Internal
1.653" (41.986 MM)
3.739" (94.971 MM)
Rear Seal Diameter:
2924, KN224
Casting Numbers:
Comments:
SOHC, PASSPORT
HONDA
3.5
PASSPORT
3.6772-3.6783" (93.401-93.429 MM)
Thrust Width:
.865 @ #3
222
Stroke: 3.6614" (93.000 MM)

2.1644-2.1654" (54.976-55.000 MM)
Rods:
2.8337-2.8346" (71.976-72.000 MM)
Main:
Main:
Comments:
SOHC,MFI, VTEC, ODYSSEY LX
ODYSSEY
Cyl Bore:
HUDSON
HUDSON
94-97
Cyl Bore:
98-02
6 Cylinders
3.3
202
55-56
Cyl Bore:
3.000" (76.2 MM)
Cyl Bore:
Rod Fillet:
3.000" (76.2 MM)

.094" (2.388 MM)
Thrust Width:
1.7480"(44.399 MM)
Cyl Bore:
Rod Fillet:
3.5625" (90.488 MM)

1/8 (NM)
Thrust Width:
1.6260
Cyl Bore:
Rod Fillet:
3.500" (88.9 MM)

.125" (3.175 MM)
Thrust Width:
1.2760
Cyl Bore:
Rod Fillet:
3.5625" (90.488 MM)

1/8 (NM)
Thrust Width:
1.626 @ # 3
2.623-2.627" (6.624-66.725 MM)

Rear Seal Diameter:
WASP SIX
Comments:
HUDSON
3.5
212
Stroke: 5.000" (127. MM)

1.9350-1.9360" (49.149-49.174 MM)
Rods:
#1 2.3410-2.3420" (59.461-59.487 MM)
Main 1:
#2 2.3730-2.3740" (60.274-60.3 MM)
Main:
Main 2:
#3 2.4040-2.4050" (61.062-61.087 MM)
Main 3:
2.623-2.627" (6.624-66.725 MM)
Rear Seal Diameter:
156639, 162178, 162518, 44670
Casting Numbers:
Comments:
TERRAPLANE UNTIL 1938
HUDSON
3.8
HUDSON
4.1
4.3
50-54
250
Stroke: 3.250" (82.55 MM)

2.2483-2.2490" (57.107-57.125 MM)
Rods:
#1 2.4988-2.4995" (63.47-63.487 MM)
Main:
Main:
3144388
Casting Numbers:
HUDSON
32-47
232
Stroke: 3.875" (98.425 MM)

2.1244-2.1254" (53.96-53.985 MM)
Rods:
#1 2.4988-2.4998" (63.47-63.495 MM)
Main:
Main:
2.623-2.627" (6.624-66.725 MM)
Rear Seal Diameter:
303011, 358011
Casting Numbers:
56
262
Stroke: 4.375" (111.125 MM)

2.1244-2.1254" (53.96-53.985 MM)
Rods:
#1 2.4988-2.4998" (63.47-63.495 MM)
Main:
Main:
301794, 303037, 3325009, 5325009
Casting Numbers:
Comments:
SUPER & COMMODORE
48-52
262
J35A1
3.5039-3.5045" (89.000-89.015 MM)

Make
Liter
CID
Vin
Model
Year
HUDSON
HUDSON
6 Cylinders
5.1
308
Cyl Bore:
Rod Fillet:
3.8125" (96.838 MM)

1/8 (NM)
Thrust Width:
1.6260
HORNET SIX
HUDSON
HUDSON
8 Cylinders
4.2
254
32-52
Stroke: 4.500" (114.3 MM)

1.9350-1.9360" (49.149-49.174 MM)
Rods:
#1 2.2790-2.2800" (57.887-57.912 MM)
Main 1:
#2 2.3110-2.3120" (58.699-58.725 MM)
Main 2:
#3 2.3410-2.3420" (59.461-59.487 MM)
Main 3:
#4 2.3730-2.3740" (60.274-60.3 MM)
Main 4:
#5 2.4040-2.4050" (61.062-61.087 MM)
Main 5:
300106, 33020
Casting Numbers:
HUDSON
5.2
HUDSON
5.4
5.7
3.000" (76.2 MM)

.094" (2.388 MM)
Thrust Width:
1.8730
Cyl Bore:
Rod Fillet:
3.8125" (96.838 MM)

1/8 (NM)
Thrust Width:
2.0630
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
1.2760
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
2.0630
55-56
327
57
Stroke: 3.250" (82.55 MM)

2.2483-2.2490" (57.107-57.125 MM)
Rods:
#1 2.4988-2.4995" (63.47-63.487 MM)
Main:
Main:
3144388
Casting Numbers:
HUDSON
Cyl Bore:
Rod Fillet:
320
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
300102, 3105305
Casting Numbers:
352
56
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
300102, 3105305
Casting Numbers:
HYUNDAI
HYUNDAI
4 Cylinders
1.5
90
ACCENT
Stroke: 3.290" (83.566 MM)

Cyl Bore:
1.7709-1.7717" (44.981-45.001 MM)
Rods:
1.9678-1.9685" (49.982-50.000 MM)
Main:
Main:
SOHC 12 VALVE, SFI, G4EKS,G4EKT,ACCENT & ACCENT GT
Comments:
HYUNDAI
1.5
90
Stroke: 3.290" (83.566 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
1.9678-1.9685" (49.982-50. MM)
Main:
Main:
Comments:
DOHC, SFI, G4EKS, G4EKT, ACCENT & ACCENT GT
HYUNDAI
Stroke:
Rods:
(cont.)
55-56
Stroke: 4.500" (114.3 MM)

2.1244-2.1254" (53.96-53.985 MM)
Rods:
#1 2.4988-2.4998" (63.47-63.495 MM)
Main:
Main:
304668
Casting Numbers:
Comments:
Engine Model
1.5
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
1.8890-1.8898" (47.981-48.001 MM)

Main:
Main:
4G1, G1
Casting Numbers:
Comments:
MMC, MFI OR 2BC, 4G15B, EXCEL
90
95-02
ACCENT
95-96
G4EKS
2.970" (75.438 MM)
Cyl Bore:
G4EKS
2.970" (75.438 MM)
EXCEL
86-89
G15B
Cyl Bore:
2.9724-2.9736" (75.499-75.529 MM)
Rod Width:
.790 OR .850
Thrust Width:
263
@ #3

Make
Liter
CID
Vin
Model
Year
HYUNDAI
HYUNDAI
Stroke:
Rods:
4 Cylinders
1.5
90
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
1.8890-1.8898" (47.981-48.001 MM)

Main:
Main:
4G1, G1
Casting Numbers:
Comments:
EXCEL
90-94
Engine Model
(cont.)
G4AJR
Cyl Bore:
2.9724-2.9736" (75.499-75.529 MM)
Rod Width:
.790 OR .850
@ #3
Thrust Width:
MMC, MFI, G4AJR, 4G15B, EXCEL
HYUNDAI
1.5
90
SCOUPE
Stroke: 3.228" (81.991 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
1.9680-1.9685" (49.987-50. MM)
Main:
Main:
Comments:
MMC, MPFI, & G4AER, SCOUPE
HYUNDAI
1.6
Cyl Bore:
97
HYUNDAI
1.6
98
1.6
1.8
1.8
Cyl Bore:
3.030" (76.962 MM)
88-91
Stroke: 3.386" (86.004 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
#1 2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
G37
Casting Numbers:
Comments:
SOHC, G37B, ELANTRA
HYUNDAI
1.8
110
112
Stroke: 3.465" (88.011 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
DOHC, ELANTRA, 2 CAM SPROCKETS
HYUNDAI
2.0
ELANTRA
Thrust Width:
1.145
95-99
2.0
264
93-99
G4DMR
04-05
3.2283-3.2295" (82.000-82.030 MM)
TIBURON
Cyl Bore:
G4GM
3.2087-3.2098" (81.501-81.529 MM)
ELANTRA
121
G37B
3.2283-3.2295" (81.999-82.029 MM)
ELANTRA
Cyl Bore:
Cyl Bore:
Stroke: 3.681" (93.500 MM)

1.7716" (45.000 MM)
Rods:
2.2441" (57.000 MM)
Main:
Main:
Comments:
DOHC, MFI, TIBURON, ELANTRA 1997 CC
93-94
3.173" (80.594 MM)
121
Stroke: 3.681" (93.500 MM)

1.7716" (45.000 MM)
Rods:
2.2441" (57.000 MM)
Main:
Main:
Comments:
DOHC
HYUNDAI
@ #3
Cyl Bore:
Stroke: 3.346" (84.988 MM)

Cyl Bore:
1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
DOHC SHORTER INSTALLED VALVE HEIGHT, 1 CAM SPROCK
HYUNDAI
01-04
3.0118-3.0130" (76.500-76.530 MM)
Thrust Width:
107
G4DRR
Cyl Bore:
98
Stroke: 3.390" (86.106 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
MMC
HYUNDAI
92-95
3.2402-3.2413" (82.301-82.329 MM)
ACCENT
Stroke: 3.4252" (87.000 MM)

1.7700" (45.000 MM)
Rods:
1.9700" (50.000 MM)
Main:
Main:
Comments:
DOHC, MFI, ACCENT GS SEDAN
HYUNDAI
ELANTRA
Cyl Bore:
G4EK
@ #3
Thrust Width:
Stroke: 2.953" (75.006 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
DOHC, MFI, G4DRR, G4DRS, ELANTRA
93-94
2.9724-2.9736" (75.499-75.529 MM)
99-05
G4GC
3.2280-3.2300" (82.000-82.030 MM)

Make
Liter
CID
Vin
Model
Year
HYUNDAI
HYUNDAI
4 Cylinders
2.0
122
SONATA
Stroke: 3.465" (88.011 MM)

Cyl Bore:
1.7709-1.7716" (44.981-44.999 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
Thrust Width:
Balance: Internal
3.3460" (84.988 MM)
Rear Seal Diameter:
DOHC,SONATA,TIBURON,ELANTRA, MECH LIFTER @ 2001->
Comments:
HYUNDAI
2.0
122
Stroke: 3.465" (88.011 MM)

1.7709-1.7716" (44.981-44.999 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
Comments:
DOHC, MPI, SONATA
HYUNDAI
2.4
143
HYUNDAI
2.4
143
SONATA
HYUNDAI
99-05
G4JS
Thrust Width:
@ #3
2.7
165
3.0
SANTA FE
3.0
XG300
3.5
3.3779" (85.800 MM)

2.1650-2.1653" (54.982-55.000 MM)
2.5190-2.5197" (63.982-64.000 MM)

Main:
Main:
1.4566" (37.000 MM)
3.5826" (91.000 MM)
Rear Seal Diameter:
V35
Casting Numbers:
Comments:
DOHC, MFI, XG350
213
01-01
3.587" (91.100 MM)
Cyl Bore:
183
SONATA
01-03
3.4134" (86.700 MM)
Cyl Bore:
181
99-01
3.3071-3.3087" (84.000-84.040 MM)
Cyl Bore:
Stroke: 2.992" (75.997 MM)

Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
09N, 19N, 29, 72, 76, 79, T3A, T3B, T3C, T3D, T3E, T3F, T3L
Casting Numbers:
Comments:
SOHC, MFI, SONATA,
Stroke:
Rods:
G4CS
3.4055-3.4067" (86.500-86.530 MM)
SONATA
Stroke: 2.992" (76.000 MM)

1.9676-1.9683" (49.976-49.996 MM)
Rods:
2.3613-2.3620" (59.978-59.996 MM)
Main:
Main:
Comments:
DOHC
HYUNDAI
89-93
3.4051-3.4067" (86.49-86.53 MM)
Cyl Bore:
152
Stroke: 2.9528" (75.000 MM)

1.8891-1.8898" (47.982-48.000 MM)
Rods:
2.4402-2.4409" (61.982-62.000 MM)
Main:
Main:
Comments:
DOHC, SANTA FE
HYUNDAI
G4AP
6 Cylinders
2.5
Stroke: 2.9528" (75.000 MM)

1.8891-1.8898" (47.982-48.000 MM)
Rods:
2.4402-2.4409" (61.982-62.000 MM)
Main:
Main:
DOHC, MFI, SONATA
Comments:
HYUNDAI
92-98
SONATA
G4GF
1.000" @ #3
HYUNDAI
HYUNDAI
92-03
3.347" (85.014 MM)
Cyl Bore:
Stroke: 3.940" (100.000 MM)

1.7709-1.7717" (44.980-45.000 MM)
Rods:
2.2434-2.2442" (56.982-57.000 MM)
Main:
Main:
Balance: Internal
1.7320" (43.993 MM)
3.3460" (84.988 MM)
Rear Seal Diameter:
Comments:
DOHC, MFI, SONATA
(cont.)
3.346" (84.988 MM)
SONATA
Cyl Bore:
Stroke: 3.940" (100.076 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
45-T, 64
Casting Numbers:
Comments:
SOHC, MFI, MMC, SONATA
Engine Model
89-98
3.587" (91.11 MM)
XG 350
02-05
G6CU
Cyl Bore:
3.6610-3.6625" (93.000-93.030 MM)
Rod Width:
.8267" (21.000 MM)
Thrust Width:
.9055" (23.000 MM) @ #3
265

Make
Liter
CID
Vin
Model
INFINITI
INFINITI
2.0
122
G20
181
3.0
3.0
90-92
183
183
I30
3.660" (92.964 MM)
Cyl Bore:
3.4252-3.4264" (87.-87.031 MM)
93-96
INFINITI
4.1
252
4.5
5.6
Q-45
274
339
QX56
04-05
VK56DE
3.8583-3.8594" (98.000-98.030 MM)
Cyl Bore:
2 Cylinders
0.5
33
Stroke: 2.756" (70.002 MM)

1.6899-1.6905" (42.923-42.939 MM)
Rods:
2.0440-2.0447" (51.918-51.935 MM)
Main:
Main:
DIESEL
Comments:
0.6
0.7
Stroke: 2.992" (75.997 MM)

1.6900-1.6906" (42.926-42.941 MM)
Rods:
2.0441-2.0447" (51.92-51.935 MM)
Main:
Main:
Comments:
DIESEL
2KA1
Thrust Width:
36
2KA1
2.756" (70.002 MM)
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.6899-1.6905" (42.923-42.939 MM)
Rods:
2.0440-2.0447" (51.918-51.935 MM)
Main:
Main:
Comments:
DIESEL
ISUZU
90-99
3.6614-3.6626" (93.-93.03 MM)
ISUZU
ISUZU
97-00
Q-45
Cyl Bore:
Stroke: 3.622" (92.000 MM)

2.1243-2.1250" (53.956-53.974 MM)
Rods:
2.5173-2.5183" (63.940-63.964 MM)
Main:
Main:
Comments:
DOHC
ISUZU
VG30DE
3.6614-3.6626" (93.000-93.030 MM)
Cyl Bore:
Stroke: 3.260" (82.804 MM)

2.0455-2.0462" (51.956-51.973 MM)
Rods:
2.5173-2.5183" (63.939-63.965 MM)
Main:
Main:
Comments:
EFI, DOHC, Q-45
INFINITI
I30
8 Cylinders
Stroke: 2.9921" (76.000 MM)

2.0455-2.0462" (51.956-51.974 MM)
Rods:
2.5173-2.5182" (63.940-63.962 MM)
Main:
Main:
SFI, Q45
Comments:
INFINITI
96-98
Cyl Bore:
Stroke: 3.272" (83.109 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
Comments:
PFI/SFI, J30
M30
3.4252-3.4264" (87.-87.031 MM)
Cyl Bore:
Stroke: 2.890" (73.406 MM)

1.7699-1.7706" (44.955-44.973 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
SFI, I30
INFINITI
SR20DE
6 Cylinders
3.0
Stroke: 3.272" (83.109 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
EFI, M30
Comments:
INFINITI
91-96
3.3858-3.3870" (85.999-86.03 MM)
Cyl Bore:
INFINITI
INFINITI
Engine Model
4 Cylinders
Stroke: 3.390" (86.106 MM)

1.8880-1.8887" (47.955-47.973 MM)
Rods:
2.1636-2.1646" (54.955-54.981 MM)
Main:
Main:
DOHC, EFI, G20
Comments:
INFINITI
Year
@ #2
2KB1
Thrust Width:
40
2KB1
2.756" (70.002 MM)
Cyl Bore:
@ #2
2KC1
Cyl Bore:
Thrust Width:
266
2KC1
2.913" (73.99 MM)
@ #2

Make
Liter
CID
Vin
Model
ISUZU
ISUZU
2 Cylinders
1.0
59
2AA1
Stroke: 3.307" (83.998 MM)

Cyl Bore:
2.0834-2.0839" (52.918-52.931 MM)
Rods:
2.7527-2.7532" (69.919-69.931 MM)
Main:
Main:
Thrust Width:
DIESEL, 4 STROKE, INDIRECT INJ, WATER COOLED, OHV
Comments:
ISUZU
1.2
72
ISUZU
49
0.9
54
0.9
56
1.0
1.1
1.4
1.5
ISUZU
1.5
@ #2
3KB1
@ #2
60
3LA1
2.7500" (69.85 MM)
3KC1
Thrust Width:
67
3KC1
2.913" (73.99 MM)
Cyl Bore:
@ #2
3LB1
87
3LB1
3.0400" (77.216 MM)
Cyl Bore:
3KR1
89
3KR1
3.1889" (81.000 mm)
Cyl Bore:
3AA1
Stroke: 3.307" (83.998 MM)

Cyl Bore:
2.0834-2.0839" (52.918-52.931 MM)
Rods:
2.7527-2.7532" (69.919-69.931 MM)
Main:
Main:
Comments:
Stroke: 3.6200" (91.948 MM)

1.9262-1.9268" (48.925 - 48.941 MM)
Rods:
2.3591-2.3596" (59.921-59.934. MM)
Main:
Main:
Comments:
DIESEL, OHV, INDIRECT INJ
3KA1
3LA1
Cyl Bore:
Stroke: 3.6200" (91.948 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.3591-2.3596" (59.921-59.934 MM)
Main:
Main:
Comments:
DIESEL, OHC, INDIRECT INJ
ISUZU
@ CENTER
2.756" (70.002 MM)
Thrust Width:
Stroke: 3.1300" (79.502 MM)

1.6878-1.6929" (42.87-43. MM)
Rods:
2.0417-2.0472" (51.859-51.999 MM)
Main:
Main:
Comments:
ISUZU
2AB1
3.386" (86.004 MM)
3KB1
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.6900-1.6906" (42.926-42.941 MM)
Rods:
2.0441-2.0447" (51.92-51.935 MM)
Main:
Main:
Comments:
DIESEL
ISUZU
@ CENTER
2.756" (70.002 MM)
Thrust Width:
Stroke: 3.1400" (79.756 MM)

1.6878-1.6929" (42.87-43. MM)
Rods:
2.0417-2.0472" (51.859-51.999 MM)
Main:
Main:
Comments:
ISUZU
2AA1
3KA1
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.6900-1.6906" (42.926-42.941 MM)
Rods:
2.0441-2.0447" (51.92-51.935 MM)
Main:
Main:
Comments:
DIESEL
ISUZU
(cont.)
3 Cylinders
0.8
Stroke: 2.756" (70.002 MM)

1.6900-1.6906" (42.926-42.941 MM)
Rods:
2.0441-2.0447" (51.92-51.935 MM)
Main:
Main:
DIESEL
Comments:
ISUZU
Engine Model
3.386" (86.004 MM)
2AB1
Stroke: 4.016" (102.006 MM)

Cyl Bore:
2.0834-2.0838" (52.918-52.929 MM)
Rods:
2.7528-2.7532" (69.921-69.931 MM)
Main:
Main:
Thrust Width:
Comments:
ISUZU
Year
92
3AA1
3.386" (86.004 MM)
3LD1
Cyl Bore:
267
3LD1
3.2700" (83.058 MM)

Make
Liter
CID
Vin
Model
Year
ISUZU
3 Cylinders
1.8
ISUZU
109
3AB1
3.3866-3.3882" (86.02-86.06 MM)
.130-.146" (3.302-3.708 MM)
.130-.146
ISUZU
4 Cylinders
1.5
ISUZU
90
Stroke: 3.110" (78.994 MM)

1.5720-1.5726" (39.929-39.944 MM)
Rods:
1.8865-1.8873" (47.917-47.937 MM)
Main:
Main:
4XC1-U, 4XC-U, 4XC-UT
Casting Numbers:
@ #2
Thrust Width:
1.5
90
ISUZU
1.5
ISUZU
1.6
1.6
90
1.6
97
97
IMPULSE
97
97
1.6
97
Stroke: 3.110" (78.994 MM)

1.5722-1.5728" (39.934-39.949 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Comments:
MFI, DOHC, NON-TURBO
1.7
Stroke: 3.6200" (91.948 MM)

1.8059-1.8110" (45.87-45.999 MM)
Rods:
2.1992-2.2047" (55.86-55.999 MM)
Main:
Main:
Comments:
3.1496-3.1508" (80.-80.03 MM)
Thrust Width:
.948 @ #2
IMPULSE
4XE1
91-93
Cyl Bore:
3.1496-3.1508" (80.-80.03 MM)
Cyl Bore:
3.150" (80.01 MM)
Cyl Bore:
3.150" (80.01 MM)
Cyl Bore:
3.150" (80.01 MM)
88-90
Stroke: 3.110" (78.994 MM)

1.5722-1.5728" (39.934-39.949 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Comments:
MFI, DOHC, TURBO
90-91
Cyl Bore:
4XC1T
@ #2
Thrust Width:
Stroke: 3.110" (78.994 MM)

1.5726" (39.944 MM)
Rods:
1.8873" (47.937 MM)
Main:
Main:
Comments:
MFI, DOHC
1.6
87-89
3.032" (77.013 MM)
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.5722-1.5728" (39.934-39.949 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Comments:
MFI, SOHC, 12 VALVE, IMPULSE & STYLUS
ISUZU
@ #2
Thrust Width:
Stroke: 3.110" (78.994 MM)

1.5726-1.5735" (39.934-39.949 MM)
Rods:
#1 2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
GSI
Casting Numbers:
Comments:
DOHC, 4XE1, 16 VALVE, IMPULSE
ISUZU
85-89
3.032" (77.013 MM)
Cyl Bore:
Stroke: 3.311" (84.099 MM)

1.5720-1.5726" (39.929-39.944 MM)
Rods:
1.8865-1.8873" (47.917-47.937 MM)
Main:
Main:
Comments:
MFI, TURBO, 4XC1T
ISUZU
85-88
3.030" (76.962 MM)
SPECTRUM, I-MARK, FWD
ISUZU
ISUZU
I-MARK
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.5726-1.5735" (39.944-39.967 MM)
Rods:
1.8873-1.8881" (47.937-47.958 MM)
Main:
Main:
4XC1-U, 4XC-U, 4XC-UT
Casting Numbers:
Comments:
2BC
ISUZU
(cont.)
3AB1
Stroke: 4.016" (102.006 MM)

Cyl Bore:
2.0834-2.0838" (52.918-52.929 MM)
Rods:
Rod Fillet:
2.7528-2.7532" (69.921-69.931 MM)
Main:
Main Fillet:
Main:
Comments:
Comments:
Engine Model
90-92
91-92
104
4LC1
Cyl Bore:
268
4LC1
3.0400" (77.216 MM)

Make
Liter
CID
Vin
Model
Year
ISUZU
ISUZU
4 Cylinders
1.8
110
1.8
110
Stroke: 3.543" (89.992 MM)

1.8083-1.8089" (45.931-45.946 MM)
Rods:
2.0440-2.0448" (51.918-51.938 MM)
Main:
Main:
Comments:
MFI, DOHC, IMPULSE
ISUZU
1.8
ISUZU
1.8
111
1.9
ISUZU
2.0
ISUZU
2.0
119
2.0
I-MARK
IMPULSE
Thrust Width:
1.465 @ #3
C190
2.0
122
G201
ISUZU
2.2
G201
Cyl Bore:
Rod Fillet:
Main Fillet:
3.390" (86.106 MM)

.138" (3.505 MM)
.138" (3.505 MM)
Cyl Bore:
3.4646-3.4661" (88.001-88.039 MM)
85-89
C201
3.2677" (83. MM)
C201
134
C201
3.2677" (83. MM)
4JC1
Cyl Bore:
269
4ZC1
@ #3
C201
Stroke: 3.622" (91.999 MM)

Cyl Bore:
2.0834-2.0839" (52.918-52.931 MM)
Rods:
ALL 5 2.7527-2.7532" (69.919-69.931 MM)
Main:
3.228" (81.991 MM)
Main:
Rear Seal Diameter:
Comments:
C-201 DIESEL, EARLY ENGINE, DUAL VALVE SPRING
Stroke: 3.620" (91.948 MM)

2.0833-2.0839" (52.916-52.931 MM)
Rods:
2.3589-2.3595" (59.916-59.931 MM)
Main:
Main:
Comments:
DIESEL, OHV, DIR INJ
C190
3.3866-3.3882" (86.02-86.06 MM)
.129-.145" (3.277-3.683 MM)
.129-.145" (3.277-3.683 MM)
Stroke: 3.622" (91.999 MM)

Cyl Bore:
2.0834-2.0839" (52.918-52.931 MM)
Rods:
ALL 5 2.7527-2.7532" (69.919-69.931 MM)
Main:
Main:
Comments:
C-201 DIESEL, LATE ENGINE, SINGLE VALVE SPRING
ISUZU
82-88
3.4252" (87. MM)
Thrust Width:
122
G180Z
@ #3
Cyl Bore:
119
121
81-85
3.307" (83.998 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.2283" (81.999 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Comments:
4ZC1, MFI, TURBO
ISUZU
@ #3
119
2.3622" (60. MM)

Main:
Main:
Comments:
GAS THRUST WASHER THKNS .098
2.0
Thrust Width:
3.300" (83.82 MM)
ISUZU
81-84
3.307" (83.998 MM)
Thrust Width:
Stroke: 3.3020" (83.871 MM)

2.0832-2.0838" (52.913-52.929 MM)
Rods:
2.3590-2.3594" (59.919-59.929 MM)
Main:
Main:
Comments:
DIESEL C190 MODEL
Stroke:
I-MARK
Cyl Bore:
Stroke: 3.2283" (81.999 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
ALL 2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Comments:
IMPULSE, CHEV S-10, OHC, PUP G200
91-92
3.1496-3.1508" (80.-80.03 MM)
Cyl Bore:
Stroke: 3.228" (81.991 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Comments:
2BC, I-MARK, G180Z
ISUZU
MANUFACTURER SAYS DO
IMPULSE
Stroke: 3.228" (81.991 MM)

1.9260-1.9270" (48.92-48.946 MM)
Rods:
2.2010-2.2020" (55.905-55.931 MM)
Main:
Main:
Comments:
DIESEL, I-MARK, FWD
4FB1
3.307" (84.000 mm)
Cyl Bore:
111
(cont.)
4FB1
Stroke: 3.228" (81.991 MM)

Cyl Bore:
1.9261-1.9268" (48.923-48.941 MM)
Rods:
2.2015-2.2021" (55.918-55.933 MM)
Main:
Main:
DIESEL, OHV, DIR INJ, 4FA1, 4FC1 * MODEL 4FA1 BORE: 3.031
Comments:
NOT GRIND CRANK
ISUZU
Engine Model
4JC1
3.460" (87.884 MM)

Make
Liter
CID
Vin
Model
Year
ISUZU
ISUZU
4 Cylinders
2.2
134
ISUZU
2.2
3.7244" (94.600 MM)

1.9279-1.9287" (48.970-48.988 MM)
4LE1
3.3500" (85.09 MM)
Cyl Bore:
134
(cont.)
4LE1
Stroke: 3.7800" (96.012 MM)

1.9240-1.9291" (48.87-48.999 MM)
Rods:
2.3567-2.3622" (59.86-60. MM)
Main:
Main:
Comments:
Stroke:
Rods:
Engine Model
AMIGO
98-02
Cyl Bore:
3.3848-3.3868" (85.975-86.025 MM)
Rod Width:
1.0417-1.0465" (26.460-26.580 MM)
2.2824-2.2833" (57.974-57.995 MM)

Main:
Main:
Comments:
SFI, DOHC, AMIGO, RODEO
ISUZU
2.2
134
Stroke: 3.460" (87.884 MM)

1.9983-1.9994" (50.757-50.785 MM)
Rods:
2.4945-2.4954" (63.36-63.383 MM)
Main:
Main:
Comments:
SFI, HOMBRE, OASIS
ISUZU
2.2
2.2
C221
136
2.2
D201
2.2
2.3
@ #3
Thrust Width:
136
136
85-87
Cyl Bore:
3.460" (87.884 MM)
Thrust Width:
1.775 @ #3
Cyl Bore:
3.4646" (88.001 MM)
Stroke: 3.620" (91.948 MM)

2.0835-2.0839" (52.921-52.931 MM)
Rods:
2.3591-2.3594" (59.921-59.929 MM)
Main:
Main:
3.228" (81.991 MM)
Rear Seal Diameter:
AY
Casting Numbers:
Comments:
C223 DIESEL, P/UP, TURBO & NON
ISUZU
D201
3.4646" (88.001 MM)
Cyl Bore:
Stroke: 3.620" (91.948 MM)

2.0835-2.0839" (52.921-52.931 MM)
Rods:
2.3591-2.3594" (59.921-59.929 MM)
Main:
Main:
AY
Casting Numbers:
Comments:
C223 TURBO DIESEL
ISUZU
C221
3.2677" (83. MM)
.138" (3.505 MM)
.138
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.620" (91.948 MM)

2.0832-2.0838" (52.913-52.929 MM)
Rods:
2.3589-2.3595" (59.916-59.931 MM)
Main:
Main:
3.937" (100. MM)
Rear Seal Diameter:
4N, AY
Casting Numbers:
Comments:
D201 DIESEL, DIRECT INJECTION
ISUZU
86-87
C223
C223
@ #3
Thrust Width:
137
96-98
3.5036-3.5043" (88.991-89.009 MM)
135
Stroke: 4.0157" (101.999 MM)

2.0833-2.0838" (52.916-52.929 MM)
Rods:
2.7527-2.7532" (69.919-69.931 MM)
Main:
Main:
Comments:
DIESEL T/W THCKNS .098
ISUZU
HOMBRE
Cyl Bore:
AMIGO
86-95
4ZD1
3.5160-3.5170" (89.306-89.332 MM)

Stroke: 3.543" (89.916 MM)
Cyl Bore:
1.9262-1.9268" (48.925-48.941 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.2016-2.2022" (55.921-55.936 MM)
.125" (3.175 MM)
Main:
Main Fillet:
1.210 @ #3
Main:
Thrust Width:
Balance: Internal
3.739" (94.971 MM)
Rear Seal Diameter:
Comments:
4ZD1, SOHC, EFI, AMIGO, P/UP, IMPULSE, TROOPER II THRUST BRG LENGTH .093
ISUZU
2.3
Stroke: 3.543" (89.916 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
#1 2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Balance: Internal
3.739" (94.971 MM)
Rear Seal Diameter:
Comments:
4ZD1, 2BC CARBURATED
137
85-87
Cyl Bore:
3.516-3.517" (89.306-89.332 MM)
Thrust Width:
1.210 @ #3
270
4ZD1

Make
Liter
CID
Vin
Model
Year
ISUZU
ISUZU
4 Cylinders
2.4
146
Engine Model
(cont.)
C240
C240
3.3866-3.3882" (86.02-86.06 MM)

Stroke: 4.016" (102.006 MM)
Cyl Bore:
2.0833-2.0838" (52.918-52.930 MM)
.130-.146" (3.302-3.708 MM)
Rods:
Rod Fillet:
2.7528-2.7532" (69.922-69.932 MM)
.130-.146" (3.302-3.708 MM)
Main:
Main Fillet:
1.7740" @ #3
Main:
Thrust Width:
C-240 DIESEL, OHV, WATER COOLED THRUST WASHERS THICKNESS: .098"
Comments:
ISUZU
2.5
152
4JA1
Stroke: 3.620" (91.948 MM)

2.0831-2.0835" (52.911-52.921 MM)
Rods:
2.3587-2.3591" (59.911-59.921 MM)
Main:
Main:
Comments:
DIESEL, OHV, DIR INJ
ISUZU
2.6
156
Stroke: 3.740" (94.996 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Balance: Internal
3.739" (94.971 MM)
Rear Seal Diameter:
4ZE1
Casting Numbers:
Comments:
4ZE1, TROOPER II, AMIGO, PICKUP
ISUZU
2.8
3.3
3.6
ISUZU
3.6
ISUZU
3.9
1.205-1.210 @#3
4JB1
4JB1
3.6622-3.6638" (93.02-93.061 MM)
Cyl Bore:
4BC2
219
4BC2
4.0157" (101.999 MM)
4BB1
222
4BB1
4.0157" (101.999 MM)
Cyl Bore:
Stroke: 4.1340" (105.000 MM)

2.5170-2.5175" (63.932-63.944 MM)
Rods:
2.9887-2.9892" (75.913-75.925 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ
4ZE1
Thrust Width:
Cyl Bore:
Stroke: 4.331" (110.007 MM)

2.5170-2.5175" (63.932-63.945 MM)
Rods:
2.9887-2.9892" (75.913-75.926 MM)
Main:
Main:
Comments:
DIESEL
88-98
3.6460-3.6470" (92.608-92.634 MM)
199
Stroke: 3.937" (100. MM)

2.5172-2.5176" (63.937-63.947 MM)
Rods:
2.9887-2.9892" (75.913-75.926 MM)
Main:
Main:
Comments:
TCM FORKLIFT, TURBO
ISUZU
AMIGO
Cyl Bore:
169
Stroke: 4.016" (102.006 MM)

2.0833-2.0839" (52.916-52.931 MM)
Rods:
2.7526-2.7532" (69.916-69.931 MM)
Main:
Main:
Comments:
DIESEL CRANKSHAFT IS TUFTRIDED
ISUZU
4JA1
3.660" (92.964 MM)
Cyl Bore:
4BE1
235
4BE1
4.1340" (105.000 MM)
Cyl Bore:
4BD1
85-90
4BD1
4.0166-4.0180" (102.022-102.057 MM)

Stroke: 4.646" (118.008 MM)
Cyl Bore:
2.5167-2.5175" (63.924-63.945 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
3.1462-3.1471" (79.913-79.936 MM)
.125" (3.175 MM)
Main:
Main Fillet:
1.339 @ #4
Main:
Thrust Width:
3.937" FLANGE (100. MM)
Rear Seal Diameter:
4
Casting Numbers:
Comments:
4BD1 DIESEL THRUST BEARING LENGTH STD: (WASHERS) .098
THRUST ON #4 MAIN
ISUZU
3.9
235
4BD1T
Stroke: 4.646" (118.008 MM)

Cyl Bore:
2.5167-2.5174" (63.924-63.942 MM)
Rods:
Rod Fillet:
3.1464-3.1471" (79.919-79.936 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.937" FLANGE (100. MM)
Rear Seal Diameter:
4
Casting Numbers:
Comments:
4BD1T, TURBO DIESEL THRUST BRG LNGTH:(WASHERS) .098
GRINDING CRANK
271
86-91
4BD1T
4.0166-4.0180" (102.022-102.057 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.339" @ #4
ISUZU DOESN'T RECOMMEND

Make
Liter
CID
Vin
Model
Year
ISUZU
4 Cylinders
3.9
ISUZU
235
TURBO
4BD2-TC
Engine Model
(cont.)
85-99
4BD2-TC
4.0166-4.0180" (102.022-102.057 MM)

Stroke: 4.646" (118.008 MM)
Cyl Bore:
2.5165-2.5175" (63.919-63.945 MM) *
.125" (3.175 MM)
Rods:
Rod Fillet:
3.1464-3.1472" (79.919-79.939 MM) *
.125" (3.175 MM)
Main:
Main Fillet:
1.339 @ #4
Main:
Thrust Width:
3.937" (100. MM)
Rear Seal Diameter:
DIESEL, NPR, CHEVY W-4 * ISUZU DOES NOT RECOMMEND GRINDING THEIR TURBO CRANKSHAFTS
Comments:
UNDERSIZE AND DO NOT OFFER BEARINGS
3.9
ISUZU
235
4BD1
85-90
Stroke: 4.646" (118.008 MM)

Cyl Bore:
2.5167-2.5175" (63.924-63.945 MM)
Rods:
Rod Fillet:
3.1462-3.1471" (79.913-79.936 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.937" FLANGE (100. MM)
Rear Seal Diameter:
4
Casting Numbers:
Comments:
4BD1 DIESEL THRUST BEARING LENGTH STD: (WASHERS) .098
3.9
ISUZU
235
4BD1T
86-91
Stroke: 4.646" (118.008 MM)

Cyl Bore:
2.5167-2.5174" (63.924-63.942 MM)
Rods:
Rod Fillet:
3.1464-3.1471" (79.919-79.936 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.937" FLANGE (100. MM)
Rear Seal Diameter:
4
Casting Numbers:
Comments:
4BD1T, TURBO DIESEL THRUST BRG LNGTH:(WASHERS) .098
GRINDING CRANK
4.1
ISUZU
249
4.3
ISUZU
4.3
ISUZU
262
4.8
264
5.2
4BG1
4.1347-4.1362" (105.021-105.059 MM)
4HF1
290
94-96
4HE1-TC
99-03
4HE1-TC
4.3323-4.3338" (110.04-110.079 MM)
Cyl Bore:
317
4HF1
4.4103-4.4114" (112.021-112.050 MM)
Cyl Bore:
Stroke: 4.9212" (124.998 MM)

2.8709-2.8713" (72.921-72.931 MM)
Rods:
#1245 3.2246-3.2254" (81.904-81.925 MM)
Main 1:
#3 3.2246-3.2254" (81.905-81.925 MM)
Main:
Main 2:
Comments:
SOHC, NPR, TURBO DIESEL, 4 STROKE, DIR INJ
ISUZU
DA220
4BG1
Cyl Bore:
Stroke: 4.331" (110.000 MM)

2.5946-2.5953" (65.902-65.922 MM)
Rods:
3.2246-3.2254" (81.905-81.925 MM)
Main 1:
#3 3.2240-3.2248" (81.890-81.910 MM)
Main:
Main 2:
Comments:
DIESEL, OHC, DIRECT INJECTION
ISUZU
ISUZU DOESN'T RECOMMEND
3.9370" (100. MM)

.138" (3.505 MM)
.138
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 4.920" (124.968 MM)

2.5170-2.5173" (63.932-63.939 MM)
Rods:
3.1464-3.1472" (79.919-79.939 MM)
Main:
Main:
Comments:
TURBO DIESEL, OHV, DIR INJ
4BD1T
4.0166-4.0180" (102.022-102.057 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.339" @ #4
DA220
Stroke: 5.118" (129.997 MM)

2.5171-2.5181" (63.934-63.96 MM)
Rods:
2.9528-2.9535" (75.001-75.019 MM)
Main:
Main:
Comments:
DIESEL THRUST WASHER THKNS .138
4BD1
4.0196-4.0212" (102.098-102.138 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.339" @ #4
4HG1
4HG1
4.5280-4.5300" (115.011-115.062 MM)

Stroke: 4.9210" (124.993 MM)
Cyl Bore:
2.5946-2.5951" (65.903-65.906 MM)
Rods:
OTHERS 3.2246-3.2254" (81.905-81.953 MM)
Main 1:
#3 3.2240-3.2248" (81.890-81.910 MM)
Main:
Main 2:
Comments:
DIESEL, DIRECT INJECTION * #3 MAIN OIL CLR: .0020-.0034" ( .051-.086 MM)
ISUZU
6 Cylinders
2.8
ISUZU
Stroke: 2.992" (75.997 MM)

1.9984-1.9994" (50.759-50.785 MM)
Rods:
2.6472-2.6482" (67.239-67.264 MM)
Main:
Main:
481, 526, 528
Casting Numbers:
Comments:
173
TROOPER II
89-91
Cyl Bore:
3.504" (89.002 MM)
Thrust Width:
.946" (24.028 MM)
TBI, TROOPER II
272

Make
Liter
CID
Vin
Model
Year
ISUZU
ISUZU
6 Cylinders
3.1
189
Stroke: 3.307" (83.998 MM)

1.9984-1.9994" (50.759-50.785 MM)
Rods:
2.6472-2.6482" (67.239-67.264 MM)
Main:
Main:
981
Casting Numbers:
Comments:
ISUZU
3.2
193
3.2
193
3.5
214
4.3
262
RODEO
92-98
6VD1
Cyl Bore:
3.6772-3.6783" (93.401-93.429 MM)
Thrust Width:
.865 @ #3
TROOPER
Thrust Width:
92-04
6VD1
3.6772" (93.401 MM)
Cyl Bore:
Stroke: 3.350" (85.000 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.918-63.933 MM)
Main:
Main:
Balance: Internal
1.653" (41.986 MM)
3.739" (94.971 MM)
Rear Seal Diameter:
Comments:
DOHC, SFI, TROOPER, AXIOM
ISUZU
91-94
TBI, TROOPER II, CHEVROLET
Stroke: 3.031" (76.987 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.919-63.932 MM)
Main:
Main:
Balance: Internal
2924, KN224
Casting Numbers:
Comments:
DOHC, 6VD1, RODEO, TROOPER 75 BLOCK
ISUZU
(cont.)
3.504" (89.002 MM)
Cyl Bore:
Stroke: 3.031" (76.987 MM)

2.1229-2.1235" (53.922-53.937 MM)
Rods:
2.5165-2.5170" (63.919-63.932 MM)
Main:
Main:
Balance: Internal
1.653" (41.986 MM)
3.739" (94.971 MM)
Rear Seal Diameter:
Comments:
SOHC, 6VD1, TROOPER II, RODEO 75 BLOCK
ISUZU
TROOPER II
Engine Model
@ #3
TROOPER
98-05
Cyl Bore:
3.6772-3.6783" (93.400-93.430 MM)
Thrust Width:
.865" (21.971 MM) @ #3
HOMBRE
6VE1
97-99
4.0010-4.0020" (101.625-101.651 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
1-3 2.4483-2.4493" (62.187-62.212 MM)
.078" (1.981 MM)
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.200 MM)
1.718" @ #4
Main:
Main 2:
Thrust Width:
Balance: External
3.736" (94.894 MM)
Rear Seal Diameter:
10055480, 10105865, 14088640, 14088840
Casting Numbers:
Comments:
SFI, HO, BALANCE SHAFT, RWD, ROLLER CAM, GM ENGINE * OIL CLR #4 .0011-.0041, C/W MAY APPEAR
DIFFERENT
ISUZU
4.3
262
HOMBRE
98
4.0010-4.0020" (101.625-101.651 MM)

Stroke: 3.484" (88.494 MM)
Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
1-3 2.4483-2.4493" (62.187-62.212 MM)
.078" (1.981 MM)
Main 1:
Main Fillet:
4 2.4478-2.4488" (62.174-62.200 MM)
1.718" @ #4
Main:
Main 2:
Thrust Width:
Balance: External
3.736" (94.894 MM)
Rear Seal Diameter:
10055480, 1015865, 14086640, 14088640
Casting Numbers:
Comments:
TBI, HO, BALANCE SHAFT, RWD, ROLLER CAM, GM ENGINE * OIL CLR #4=.0011-.0041, C/W MAY APPEAR
DIFFERENT
ISUZU
5.4
Stroke: 4.331" (110.007 MM)

2.5167-2.5175" (63.924-63.945 MM)
Rods:
3.1464-3.1472" (79.919-79.939 MM)
Main:
Main:
4, 8
Casting Numbers:
Comments:
DIESEL
329
6BB1
6BB1
Cyl Bore:
4.0157" (101.999 MM)
Thrust Width:
1.342 @ #4
273

Make
Liter
CID
Vin
Model
Year
ISUZU
ISUZU
6 Cylinders
5.8
353
Stroke: 4.646" (118.008 MM)

2.5167-2.5174" (63.924-63.942 MM)
Rods:
3.1464-3.1471" (79.919-79.936 MM)
Main:
Main:
3.937 FLANGE" (100. MM)
Rear Seal Diameter:
4, 9806
Casting Numbers:
Comments:
ISUZU
6BD1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
6BD1 DIESEL THRUST BRG LENGTH STD: (WASHERS) .098
5.8
6.5
(cont.)
6BD1
4.0166-4.0180" (102.022-102.057 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.339 @ #4
THRUST ON #4 MAIN
353
6BD1-T
Stroke: 4.646" (118.008 MM)

Cyl Bore:
2.5167-2.5175" (63.924-63.945 MM)
Rods:
Rod Fillet:
OTHRS 3.1464-3.1472" (79.919-79.939 MM)
Main 1:
Main Fillet:
#4 3.1459-3.1466" (79.906-79.924 MM)
Main:
Main 2:
Thrust Width:
3.937" FLANGE (100. MM)
Rear Seal Diameter:
8
Casting Numbers:
Comments:
TURBO, DIESEL, DIR INJ THRUST BRG LENGTH STD: (WASHERS) .098
RECOMMEND GRINDING
ISUZU
76-88
Engine Model
396
6BD1-T
4.0166-4.0180" (102.022-102.057 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.339 @ #4
ISUZU DOESN'T
6BG1
88-94
6BG1
4.1347-4.1362" (105.021-105.059 MM)

Stroke: 4.921" (124.993 MM)
Cyl Bore:
2.5167-2.5175" (63.924-63.945 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
OTHRS 3.1464-3.1472" (79.919-79.939 MM)
.125" (3.175 MM)
Main 1:
Main Fillet:
#4 3.1459-3.1466" (79.906-79.924 MM)
1.339 @ #4
Main:
Main 2:
Thrust Width:
3.937 FLANGE" (100. MM)
Rear Seal Diameter:
Comments:
DIESEL, INDUSTRIAL, DIR INJ THRUST BRG LENGTH STD: (WASHERS) .098
THRUST ON #4 MAIN
ISUZU
6.5
396
6BG1-T
88-94
6BG1-T
4.1347-4.1362" (105.021-105.059 MM)

Stroke: 4.921" (124.993 MM)
Cyl Bore:
2.5167-2.5175" (63.924-63.945 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
OTHRS 3.1464-3.1472" (79.919-79.939 MM)
.125" (3.175 MM)
Main 1:
Main Fillet:
#4 3.1459-3.1466" (79.906-79.924 MM)
1.339 @ #4
Main:
Main 2:
Thrust Width:
3.937" FLANGE (100. MM)
Rear Seal Diameter:
Comments:
TURBO DIESEL, 6BG1-T & 6BG1-TC, NRR TRUCK, DIR INJ THRUST BRG LENGTH STD: (WASHERS) .098
ISUZU
7.1
435
6HE1-TC
Stroke: 4.9213" (125.001 MM)

Cyl Bore:
2.5946-2.5954" (65.903-65.923 MM)
Rods:
1 3.2234-3.2242" (81.874-81.895 MM)
Main 1:
4 3.2246-3.2254" (81.905-81.925 MM)
Main:
Main 2:
Comments:
TURBO DIESEL, DIR INJ, 4 STROKE * #4 OIL CLEAR: .0037-.0049"
ISUZU
7.8
475
6HK1-TC
Stroke: 4.9213" (125.000 MM)

Cyl Bore:
2.8702-2.8709" (72.902-72.922 MM)
Rods:
Comments:
6HK1-TC, TURBO DIESEL, DIR INJ, OHC 4 VALVE/CYL
ISUZU
8.4
94-01
513
6HE1-TC
4.2207" (107.206 MM)
98-01
6HK1-TC
4.5288-4.5295" (115.031-115.050 MM)
6SA1
84-92
6SA1
4.528" (115.011 MM)

Stroke: 5.315" (135.001 MM)
Cyl Bore:
3.0667-3.0675" (77.894-77.915 MM)
Rods:
#1-7 3.5397-3.5405" (89.908-89.929 MM)
Main 1:
#4 3.5385-3.5393" (89.878-89.898 MM)
Main:
Main 2:
Comments:
OHC, DIESEL ISUZU DOES NOT RECOMMEND GRINDING TURBO CRANKS.
ISUZU
8.4
513
6SA1-T
86-90
6SA1-T
4.5280" (115.011 MM)

Stroke: 5.3100" (134.874 MM)
Cyl Bore:
3.0667-3.0675" (77.894-77.915 MM)
Rods:
#1-7 3.5397-3.5405" (89.908-89.929 MM)
Main 1:
#4 3.5385-3.5393" (89.878-89.898 MM)
@ #4
Main:
Main 2:
Thrust Width:
Comments:
TURBO DIESEL ISUZU DOES NOT RECOMMEND GRINDING TURBO CRANKS
ISUZU
9.8
Stroke: 5.709" (155.000 MM)

3.1454-3.1462" (79.894-79.914 MM)
Rods:
#1-7 3.5397-3.5405" (89.908-89.929 MM)
Main 1:
#4 3.5385-3.5393" (89.878-89.898 MM)
Main:
Main 2:
Comments:
OHC, DIESEL
598
6SD1
Cyl Bore:
Thrust Width:
274
91-98
4.7244" (120.000 MM)
@ #4
6SD1

Make
Liter
CID
Vin
Model
Year
ISUZU
ISUZU
6 Cylinders
12.0
733
6R
Stroke: 6.300" (160.02 MM)

Cyl Bore:
3.5392-3.5403" (89.896-89.924 MM)
Rods:
Rod Fillet:
3.9323-3.9333" (99.88-99.906 MM)
Main:
Main Fillet:
Main:
6RB2T TURBO DIESEL * #1 MAIN RADIUS/FILLET .217-.240
Comments:
ISUZU
12.0
733
12.0
ISUZU
13.7
Stroke:
Rods:
Main:
Main:
6.2992" (160. MM)

3.5392-3.5403" (89.896-89.924 MM)
3.9323-3.9332" (99.88-99.903 MM)
Stroke:
Rods:
Main:
Main:
6.2992" (160.000 MM)

3.5392-3.5403" (89.869-89.924 MM)
3.9323-3.9332" (99.880-99.903 MM)
Stroke:
Rods:
Main:
Main:
6.2992" (160.000 MM)

3.5392-3.5403" (89.896-89.924 MM)
3.9323-3.9332" (99.880-99.903 MM)
ISUZU
ISUZU
13.7
13.7
70-80
6RA1
733
70-80
838
70-80
6RB1
838
78-88
6RB1T
838
78-88
6RB2
78-88
6RB2
8 Cylinders
5.3
325
ASCENDER
03-05
LM4
Cyl Bore:
3.7795-3.7802" (96.000-96.018 MM)
Thrust Width:
1.029-1.032" (26.140-26.220 MM)
4 Cylinders
3.7
224
3.9
3.9
238
3.9
8045
4.055" (102.997 MM)
.090-.098" (2.3-2.5 MM)
.090-.098" (2.3-2.5 MM)
1.2598-1.2637" (32.00-32.100 MM)
8040
Cyl Bore:
238
Stroke: 4.527" (114.986 MM)

2.5089-2.5096" (63.726-63.744 MM)
Rods:
3.1414-3.1421" (79.792-79.809 MM)
Main:
Main:
Comments:
8040.05 NON TURBO 4.094"BORE & 4.527"STROKE
Stroke: 4.527" (114.986 MM)

2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-2.9999" (76.187-76.197 MM)
Main:
Main:
Comments:
4.095 BORE, 4.527 STROKE, FD-5
8045
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.527" (114.986 MM)

2.5089-2.5096" (63.726-63.744 MM)
Rods:
3.1414-3.1421" (79.792-79.809 MM)
Main:
Main:
Comments:
IVECO
6RB1T
5.3149-5.3165" (134.998-135.039 MM)

.197-.213" (5.004-5.410 MM)
.177-.200" (4.495-5.080 MM) *
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 4.330" (109.982 MM)

2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-2.9999" (76.187-76.197 MM)
Main:
Main:
Comments:
IVECO
6RB1
5.3149-5.3165"134.998-135.039 MM)
.197-.213" (5.004-5.410 MM)
.1770-.2000" (4.495-5.080 MM) *
Cyl Bore:
Rod Fillet:
Main Fillet:
IVECO
IVECO
E120
5.3149-5.3165" (134.998-135.039 MM)

.197-.213" (5.004-5.41 MM)
.177-.200 *
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.622" (92.000 MM)

2.0991-2.0999" (53.318-53.338 MM)
Rods:
2.5588-2.5593" (64.993-65.007 MM)
Main:
Main:
DOHC
Comments:
IVECO
6RA1
5.315" (135.001 MM)
Cyl Bore:
ISUZU
ISUZU
6RB2T
5.315" (135.001 MM)

.217-.240" (5.512-6.096 MM)
.177-.240 *
E120
Stroke: 5.512" (140.005 MM)

3.4605-3.4616" (87.897-87.925 MM)
Rods:
3.9323-3.9333" (99.88-99.906 MM)
Main:
Main:
Comments:
E120 & E120H DIESEL
(cont.)
5.315" (135.001 MM)

.217-.240" (5.512-6.096 MM)
.177-.240 *
Stroke: 5.512" (140.004 MM)

Cyl Bore:
3.4604-3.4616" (87.894-87.925 MM)
Rods:
Rod Fillet:
3.9323-3.9333" (99.88-99.906 MM)
Main:
Main Fillet:
Main:
Comments:
6RA1 & 6RA2 DIESEL * #1 MAIN RADIUS/FILLET .217-.240
ISUZU
Engine Model
85-94
8040.05
Cyl Bore:
238
275
8040.05
4.094" (103.988 MM)
8045(2)
Cyl Bore:
8040
4.094" (103.988 MM)
4.094" (103.988 MM)
FD-5

Make
Liter
CID
Vin
Model
Year
IVECO
IVECO
4 Cylinders
5.4
330
FL9
4.5275-4.5284" (114.999-115.021 MM)
.137-.148" (3.48-3.759 MM)
.137-.148" (3.480-3.759 MM)
1.968-1.970 @#3
IVECO
IVECO
(cont.)
CO3
Stroke: 5.118" (129.997 MM)

Cyl Bore:
2.8536-2.8543" (72.481-72.499 MM)
Rods:
Rod Fillet:
3.1410-3.1417" (79.781-79.799 MM)
Main:
Main Fillet:
Main:
Thrust Width:
DIESEL, 8-B CRAWLER, FL9 THRUST WASHER THKNS .091-.093
Comments:
Rods:
Main:
Main:
Engine Model
6 Cylinders
0.0
8465
336
8060.24
8465
3.22833.5416-3.5428" (89.958-89.890 MM)
IVECO
5.5
Stroke: 4.331" (110.007 MM)

Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
Comments:
DIESEL, 4.055 BORE, 4.331 STROKE,NON-FLANGED LINER
IVECO
5.5
336
8060.24
4.055" (102.997 MM)
8065.04
8065.04
4.055" (102.997 MM)

Stroke: 4.330" (109.982 MM)
Cyl Bore:
2.3120-2.3128 *" (58.725-58.745 MM)
.074-.078" (1.88-1.981 MM)
Rods:
Rod Fillet:
2.9994-3.0002 *" (76.185-76.205 MM)
.090-.098
Main:
Main Fillet:
Main:
Comments:
4.055 BORE, 4.330 STROKE, NON TURBO * .004,.010,.020,.030,.040 O.S. BRGS AVLBL
THRUST RING
THKNS .133-.135
IVECO
5.5
336
8065.24
8065.24
4.055" (102.997 MM)

Stroke: 4.330" (109.982 MM)
Cyl Bore:
2.3120-2.3128" (58.725-58.745 MM)
.074-.078" (1.88-1.981 MM)
Rods:
Rod Fillet:
2.9994-3.0002" (76.185-76.205 MM)
.090-.098
Main:
Main Fillet:
4.331" (110.007 MM)
Main:Seal Diameter:
Rear
Comments:
TURBO, 4.055 BORE, 4.330 STROKE .004,.010,.020,.030,.040 O.S. BRGS AVLBL
THRUST RING THKNS
.133-.135
IVECO
5.9
358
Stroke: 4.528" (115.011 MM)

2.5089-2.5096" (63.726-63.744 MM)
Rods:
3.1414-3.1421" (79.792-79.809 MM)
Main:
Main:
Comments:
DIESEL, 4.094 BORE, 4.528 STROKE, 8060.25
IVECO
5.9
8060
358
8060
4.094" (103.988 MM)
Cyl Bore:
8065.05
8065.05
4.094" (103.988 MM)

Stroke: 4.527" (114.986 MM)
Cyl Bore:
2.5088-2.5096" (63.724-63.744 MM) *
.118-.138" (2.997-3.505 MM)
Rods:
Rod Fillet:
3.1414-3.1421 *" (79.792-79.809 MM)
.118-.138
Main:
Main Fillet:
Main:
Comments:
4.095 BORE, 4.527 STROKE, NON TURBO * .005,.010,.020,.030,.040 OVERSIZE BRGS AVLBL THRUST
RING THKNS .133-.135
IVECO
5.9
358
8065.25
8065.25
4.094" (103.988 MM)

Stroke: 4.527" (114.986 MM)
Cyl Bore:
2.5088-2.5096 *" (63.724-63.744 MM)
.118-.138" (2.997-3.505 MM)
Rods:
Rod Fillet:
3.1414-3.1421 *" (79.792-79.809 MM)
.118-.138" (2.997-3.505 MM)
Main:
Main Fillet:
4.487-4.488" (113.97-113.995 MM)
Main:
Rear Seal Diameter:
Comments:
TURBO, 4.095 BORE, 4.527 STROKE * .005,.010,.020,.030,.040 OVERSIZE BRGS AVLBL THRUST RING
THKNS .133-.135
IVECO
7.4
452
Stroke: 5.118" (129.997 MM)

2.7505-2.7510" (69.863-69.875 MM)
Rods:
3.0000-3.0008" (76.2-76.22 MM)
Main:
Main:
Comments:
FL 10 LOADER THRUST WASHER THKNS .091-.093
IVECO
8.1
Stroke: 5.120" (130.048 MM)

2.8536-2.8536" (72.481-72.481 MM)
Rods:
3.1410-3.1417" (79.781-79.799 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ, MAGIRUS
CP3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
494
70-79
8360.05
Cyl Bore:
276
CP3
4.3307-4.3316" (110.-110.023 MM)

.137-.148" (3.48-3.759 MM)
.137-.148" (3.480-3.759 MM)
1.960 @ #3
4.530" (115.062 MM)
8360.05

Make
Liter
CID
Vin
Model
Year
IVECO
6 Cylinders
8.1
IVECO
494
8361
Stroke: 5.1181" (130.000 MM)

2.8536-2.8543" (72.482-72.500 MM)
Rods:
3.1410-3.1417" (79.782-79.800 MM)
Main:
Main:
TURBO DIESEL, DIR INJ, 8361SRM37 ENGINE
Comments:
8.1
IVECO
4.5276" (115.000 MM)
Thrust Width:
1.9685-1.9705" @ CENTER
494
8365
8.1
IVECO
494
9.6
IVECO
584
9.8
10.3
629
13.8
8220.02
8205
8205
Cyl Bore:
4.803" (121.996 MM)
Thrust Width:
2.7559-2.7579
Stroke: 5.512" (140.005 MM)

2.9500-2.9509" (74.93-74.953 MM)
Rods:
3.6254-3.6263" (92.085-92.108 MM)
Main:
Main:
4670001, 670901
Casting Numbers:
Comments:
8205.03, 4.921 BORE, 5.512 STROKE
IVECO
1.658-1.673"
4.920" (124.968 MM)
599
Stroke: 5.512" (140.005 MM)

2.9500-2.9509" (74.93-74.953 MM)
Rods:
3.6254-3.6263" (92.085-92.108 MM)
Main:
Main:
4670001, 670901
Casting Numbers:
Comments:
8205.02, 4.803 BORE, 5.512 STROKE
IVECO
8365.25.540
4.528" (115.000 MM)

.138-150" (3.5-3.8 MM)
8220.02
Stroke: 5.110" (129.794 MM)

Cyl Bore:
2.9996-3.0004" (76.19-76.21 MM)
Rods:
3.3850-3.3858" (85.979-85.999 MM)
Main:
Main:
Comments:
DIESEL, MAGIRUS 8220,4.92 BORE,5.11 STROKE,DIR INJ
IVECO
8365
4.5275-4.5284" (114.999-115.021 MM)
.138-.150" (3.505-3.81 MM)
.138-.150" (3.505-3.810 MM)
1.658-1.673 @#4
8365.25.540
Stroke: 5.118" (130.000 MM)

Cyl Bore:
2.8534-2.8543" (72.477-72.500 MM)
Rods:
Rod Fillet:
3.1408-3.1417" (79.777-79.800 MM)
Main:
Main:
Thrust Width:
4.920-4.921" (124.960-125.000 MM)
Rear Seal Diameter:
Comments:
TURBO DIESEL PILOT DIAMETER 4.920-4.921" (124.960-125.000 MM)
8205
8205.03
Cyl Bore:
4.921" (124.993 MM)
Thrust Width:
2.7559-2.7579
842
8215.22
Stroke: 6.142" (156.007 MM)

3.3352-3.3360" (84.714-84.734 MM)
Rods:
4.0503-4.0512" (102.878-102.9 MM)
Main:
Main:
Comments:
DIESEL, TURBO, DIR INJ
8215.22
Cyl Bore:
5.3937" (137. MM)
Thrust Width:
2.5591-2.5610
IVECO
8 Cylinders
0.0
IVECO
8285
8285
5.7080-5.7090" (144.983-145.009 MM)
Cyl Bore:
3.7127-3.7135" (94.303-94.323 MM)

4.4478-4.4486" (112.974-112.994 MM)
JAGUAR
JAGUAR
6 Cylinders
3.4
Stroke: 4.172" (105.969 MM)

2.0860-2.0866" (52.984-53. MM)
Rods:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main:
C1046
Casting Numbers:
Comments:
(cont.)
8361SRM37
Cyl Bore:
Stroke: 5.120" (130.048 MM)

Cyl Bore:
2.8536-2.8543" (72.481-72.499 MM)
Rods:
Rod Fillet:
3.1410-3.1417" (79.781-79.799 MM)
Main:
Main Fillet:
Main:
Thrust Width:
64806670F, 64806671F
Casting Numbers:
Comments:
FL10C FIAT ALLIS THRUST WASHER THICKNESS .133-135
Rods:
Main:
Main:
Engine Model
210
XK140
Cyl Bore:
Rod Fillet:
XK 140 USES THRUST WASHERS
277
61-65
3.270" (83.058 MM)
.125 (1/8)

Make
Liter
CID
Vin
Model
JAGUAR
JAGUAR
6 Cylinders
3.6
219
XJ6
Stroke: 3.6220" (91.999 MM)

2.0855-2.0860" (52.972-52.984 MM)
Rods:
3.0000-3.0010" (76.2-76.225 MM)
Main:
Main:
DOHC, XJ6, 24 VALVE, AJ6 ENGINE
Comments:
JAGUAR
3.8
230
4.0
243
4.0
4.2
Cyl Bore:
Rod Fillet:
3.4252" (87.000 MM)

.125" (3.175 MM)
XJ6
243
258
3.623" (92.024 MM)
Thrust Width:
1.748-1.750 *
8 Cylinders
4.0
244
XK8
97-03
3.3858" (85.999 MM)
Cyl Bore:
12 Cylinders
5.3
326
XJS
72-90
Stroke: 2.756" (70.002 MM)

Cyl Bore:
2.2994-2.3000" (58.405-58.42 MM)
Rods:
3.0007-3.0012" (76.218-76.23 MM)
Main:
Main:
Thrust Width:
V-12 GAS JAGUAR STATES CRANK IS UNGRINDABLE.
Comments:
6.0
366
XJ12
3.543" (89.992 MM)
@ CENTER
XJS
94-96
3.543" (89.992 MM)

Stroke: 3.091" (78.511 MM)
Cyl Bore:
2.2992-2.3008" (58.4-58.44 MM)
Rods:
3.0006-3.0018" (76.215-76.246 MM)
Main:
@ CENTER
Main:
Thrust Width:
Comments:
V-12 GAS, XJS JAGUAR DOES NOT RECOMMEND GRINDING CRANKSHAFT.
JEEP
JEEP
4 Cylinders
2.2
134
53-71
Stroke: 4.375" (111.125 MM)

Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.3331-2.3341" (59.261-59.286 MM)
Main:
Main:
Thrust Width:
2.302-2.312" (58.470-58.724 MM) F/P BS-3165,VICTOR
Rear Seal Diameter:
641127, 646318
Casting Numbers:
Comments:
AJ16
66-87
Cyl Bore:
JAGUAR
JAGUAR
93-96
3.5827" (91.001 MM)
XJ6
Stroke: 3.3858" (85.999 MM)

2.2040-2.2047" (55.982-55.999 MM)
Rods:
2.4402-2.4409" (61.981-61.999 MM)
Main:
Main:
XK8, ALSO VIN 2 & VIN 8 (SUPERCHARGED)
Comments:
JAGUAR
AJ6
90-97
XJS
JAGUAR
JAGUAR
(cont.)
3.5827" (91.001 MM)
Cyl Bore:
Stroke: 4.173" (105.994 MM)

2.0860-2.0866" (52.984-53. MM)
Rods:
2.7500-2.7505" (69.85-69.863 MM)
Main:
Main:
Comments:
XJ6, DOHC * THRUST ON CENTER
Engine Model
55-64
Cyl Bore:
Stroke: 4.016" (102.006 MM)

2.0856-2.0861" (52.974-52.987 MM)
Rods:
3.0007-3.0012" (76.218-76.23 MM)
Main:
Main:
Comments:
XJS
JAGUAR
3.5830" (91.008 MM)
Stroke: 4.016" (102.006 MM)

2.0856-2.0861" (52.974-52.987 MM)
Rods:
3.0007-3.0012" (76.218-76.23 MM)
Main:
Main:
Comments:
XJ6
JAGUAR
88-92
Cyl Bore:
Stroke: 4.172" (105.969 MM)

2.0860-2.0866" (52.984-53. MM)
Rods:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main:
C1046
Casting Numbers:
JAGUAR
Year
JEEP, F HEAD, ONE VALVE IN BLOCK, L = FLATHEAD * WASHERS
278
3.125" (79.375 MM)
@ #1 *
AJ28

Make
Liter
CID
Vin
Model
JEEP
JEEP
2.4
148
2.6
3.7
47-50
Cyl Bore:
Rod Fillet:
3.000" (76.2 MM)

.094" (2.388 MM)
Thrust Width:
1.308
Cyl Bore:
Rod Fillet:
3.125" (79.375 MM)

.094" (2.388 MM)
Thrust Width:
1.308
161
Stroke: 3.500" (88.9 MM)

1.8740-1.8750" (47.6-47.625 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
642462
Casting Numbers:
JEEP
Engine Model
6 Cylinders
Stroke: 3.500" (88.9 MM)

1.8740-1.8750" (47.6-47.625 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
642462
Casting Numbers:
JEEP
Year
50-62
226
54-65
3.3125" (84.138 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.0619-2.0627" (52.372-52.393 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.3744-2.3752" (60.31-60.33 MM)
Main:
1.638 @ #1
Main:
Thrust Width:
2.4375" (61.913 MM)
Rear Seal Diameter:
1357898, 1378354, 732596, 733536, B78354, F600C-217, F600C-500A, F600C-502A, F600C-506A,
Casting Numbers:
F600C-601, F600C-606C
JEEP
3.8
230
62-65
3.3438" (84.933 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.0619-2.0627" (52.372-52.393 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.3747-2.3755" (60.317-60.338 MM)
Main:
1.638 @ REAR
Main:
Thrust Width:
2.4375" (61.913 MM)
Rear Seal Diameter:
3172216, 3172218R, 3188947, 3204904, 3208627, 3208794, 3214722, 926097, 928928, 934652
Casting Numbers:
Comments:
OHC JEEP OHC
JEEP
Stroke:
Rods:
4.2
258
3.895" (98.933 MM)

2.0948-2.0955" (53.208-53.226 MM)
#1 2.4996-2.5001" (63.49-63.503 MM)

Main:
Main:
3199738C, 3199798, 3214723, RD67703
Casting Numbers:
Comments:
JEEP
71-77
Cyl Bore:
Rod Fillet:
Rod Width:
3.750" (95.25 MM)

.125" (3.175 MM)
1.063" (27. MM)
Thrust Width:
1.276
JEEP
JEEP
Stroke:
Rods:
8 Cylinders
5.0
304
3.438" (87.325 MM)

2.0948-2.0955" (53.208-53.226 MM)
70-79
Cyl Bore:
Rod Width:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
Thrust Width:
3195292, 3213754, 3214724, 4487237, RD51261
Casting Numbers:
JEEP
5.4
JEEP
5.7
.995" (25.273 MM)

1.276
327
Stroke: 3.250" (82.55 MM)

2.2483-2.2490" (57.107-57.125 MM)
Rods:
#1 2.4988-2.4995" (63.47-63.487 MM)
Main:
Main:
3144388
Casting Numbers:
Comments:
JEEP
Stroke: 3.850" (97.79 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
1235419, 1375809, 1378346
Casting Numbers:
Comments:
JEEP, BUICK ENGINE
3.750" (95.25 MM)
65-68
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
1.276
Cyl Bore:
Rod Fillet:
3.800" (96.52 MM)

.125" (3.175 MM)
Thrust Width:
1.064
350
68-71
279

Make
Liter
CID
Vin
Model
Year
JEEP
8 Cylinders
5.9
JEEP
Stroke:
Rods:
360
3.438" (87.325 MM)

2.0948-2.0955" (53.208-53.226 MM)
71-91
.995" (25.273 MM)

1.276
VIN N & 7, 2BC
JEEP
Stroke:
Rods:
(cont.)
4.078" (103.581 MM)
Cyl Bore:
Rod Width:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
Thrust Width:
3195292, 3213754, 3214724, 4487237, RD51261
Casting Numbers:
Comments:
Engine Model
6.6
401
3.680" (93.472 MM)

2.2464-2.2485" (57.059-57.112 MM)
74-78
4.165" (105.791 MM)
Cyl Bore:
1.846-1.852" (46.888-47.041 MM)

Rod Width:
2.7472-2.7479" (69.779-69.797 MM)
Main:
1.273-1.275 @#3
Main:
Thrust Width:
3190079, 3190079, 3196921, 3196922, 3199824, 3199842, 3199842, 321472, 321472, 3214725, 3214725,
Casting Numbers:
3220411, 3220411
Comments:
VIN Z, 4BC
JOHN DEERE
JOHN DEERE
1 Cylinder
0.0
FC290V
Cyl Bore:
FC290V
3.0735" MAX (78.067 MM)
1.3948" MIN (35.428 MM)

Rods:
1.1780" MIN (29.922 MM) @ PTO SIDE
Main 1:
1.1784" MIN (29.940 MM) @ MAGNETO SIDE
Main 2:
GAS, KAWASAKI, OHV, 4 STROKE, AIR-COOLED BALANCER LINK ROD JOURNAL OD: 1.8453" MIN (46.953
Comments:
MM)
JOHN DEERE
0.0
FC420V
Cyl Bore:
FC420V
3.5069" MAX (89.076 MM)
1.6113" MIN (40.928 MM)

Rods:
1.3747" MIN (34.919 MM) PTO SIDE
Main 1:
1.3757" MIN (34.945 MM) MAGNETO SIDE
Main:
Main 2:
Comments:
GAS,KAWASAKI,ALSO FC540V, OHV,4 STROKE, AIR COOLED BALANCER LINK ROD JOURNAL OD: 2.1240"
MIN (53.950 MM)
JOHN DEERE
0.0
FC540V
Cyl Bore:
FC540V
3.5069" MAX (89.076 MM)
1.6113" MIN (40.928 MM)

Rods:
1.4923" MIN (37.904 MM) PTO SIDE
Main 1:
1.3757" MIN (34.945 MM) MAGNETO SIDE
Main:
Main 2:
Comments:
GAS, KAWASAKI, OHV, 4-STROKE, AIR-COOLED BALANCER LINK ROD JOURNAL OD: 2.2811" MIN (57.941
MM)
JOHN DEERE
0.1
Stroke: 1.693" (43.002 MM)

.9429" MIN (23.95 MM)
Rods:
Comments:
K SERIES, AIR COOLED, KAWASAKI ENGINE
JOHN DEERE
0.2
13
FA130D
Cyl Bore:
RX63 RIDING MOW
Stroke: 2.008" (51.003 MM)

Cyl Bore:
1.061" MIN (26.949 MM)
Rods:
Comments:
K SERIES, KAWASAKI ENGINE, RX63 RIDING MOWER
JOHN DEERE
0.2
13
JOHN DEERE
0.5
28
FA210D
2.8346" (71.999 MM)
RX63 RIDING MOW
Stroke: 2.008" (51.003 MM)

Cyl Bore:
1.061" MIN. (26.949 MM)
Rods:
.983" MIN. (24.968 MM)
Main:
Main:
Comments:
K SERIES, KAWASAKI ENGINE, RX63 RIDING MOWER
FA130D
2.441" (62.001 MM)
FA210V
2.8346" (71.999 MM)
FB460V
FB460V
3.5031-3.5039" (88.980-89.000 MM)

Stroke: 2.9134" (74.000 MM)
Cyl Bore:
1.4541" MIN (36.934 MM) *
Rods:
PTO 1.3746" MIN (34.914 MM)
Main 1:
MAG 1.3757" MIN (34.945 MM)
Main:
Main 2:
Comments:
GAS, 4 STROKE, AIR-COOLED, KAWASAKI ENGINE * LINK ROD JOURNAL DIAM 2.1241" MIN (53.951 MM)
280

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
Engine Model
2 Cylinders
0.0
650
2TN
1.7323-1.7339" (44.-44.041 MM)

Rods:
#1 1.8480-1.8450" (46.939-46.863 MM) *
Main 1:
#2 1.8480-1.8450" (46.939-46.863 MM) *
Main 2:
#3 2.5570-2.5580" (64.948-64.973 MM) *
Main 3:
2TN YANMAR DIESEL * MAIN JOURNAL SPECS IN OE MANUAL MAY BE WRONG THESE ARE RIGHT!
Comments:
JOHN DEERE
0.4
25
Stroke: 2.600"
1.3730-1.3740"
Rods:
1.4990-1.5000"
Main:
Main:
Comments:
R SERIES DIESEL TRACTOR STARTING MOTOR
JOHN DEERE
0.6
38
Stroke: 2.677" (68.000 MM)

1.3360" MIN (33.934 MM)
Rods:
1.3350" MIN (33.909 MM)
Main:
Main:
Comments:
KAWASAKI ENGINE LIQUID COOLED
JOHN DEERE
0.7
0.7
JOHN DEERE
0.8
FD620D
43
43
Stroke: 2.620" (66.548 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
18HP, 318 LAWN & GARDEN TRACTORS
48
0.8
48
0.8
48
JOHN DEERE
1.0
JOHN DEERE
1.1
JOHN DEERE
1.3
B43G
3.250" (82.55 MM)
P218G
3.250" (82.55 MM)
420 TRACTOR, F9
B48G
3.250" (82.55 MM)
420 TRACTOR, F9
60
P220G
3.250" (82.55 MM)
F930 MOWER
Cyl Bore:
66
Stroke: 4.000" (101.6 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
62025B, 662025D, L4102T, L4124T, L4612T
Casting Numbers:
Comments:
L SERIES TRACTOR, HERCULES NXB
B43E
3.250" (82.55 MM)
318 TRACTOR
Stroke: 2.870" (72.898 MM)

Cyl Bore:
1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
ONAN ENG,20HP,420 LAWN/GARDEN TRACT,F910 FRNT MOWR
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
ONAN ENGINE, 24HP, F930 FRONT MOWERS
FD620D
318 TRACTOR
Cyl Bore:
Stroke: 2.870" (72.898 MM)

Cyl Bore:
1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
20HP, 420 LAWN & GARDEN TRACTORS,F910 FRONT MOWERS
JOHN DEERE
T260
3.560" (90.424 MM)
L SERIES
31-42
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

.062" (1.575 MM)
Thrust Width:
1.627
77
LA SERIES
Stroke: 4.000" (101.6 MM)

Cyl Bore:
1.7470-1.7480" (44.374-44.399 MM)
Rods:
Rod Fillet:
#1 1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Thrust Width:
62025B, 662025D, L4102T, L4124T, L4612T
Casting Numbers:
Comments:
LA SERIES TRACTOR, JOHN DEERE ENGINE SEE 1.1L AS WELL
281
PONY
2.994-2.995" (76.048-76.073 MM)
316 TRACTOR
Cyl Bore:
Stroke: 2.875" (73.025 MM)

Cyl Bore:
1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
ONAN ENGINE, 18HP, 318 LAWN & GARDEN TRACTORS
JOHN DEERE
49-54
2.3125"
Cyl Bore:
Stroke: 2.620" (66.548 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
16HP, 316 LAWN & GARDEN TRACTORS
JOHN DEERE
R SERIES
Cyl Bore:
41-46
3.500" (88.9 MM)

1/16 (.062) (NM)
1.627
NXB

Make
Liter
CID
Vin
Model
JOHN DEERE
JOHN DEERE
Engine Model
2 Cylinders
1.6
100
40
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM) *
Rods:
Rod Fillet:
#1 2.3970-2.3980" (60.884-60.909 MM)
Main:
Main Fillet:
Main:
Thrust Width:
M1692, M1692T, M1692T, M3114T, M450T, M450-T
Casting Numbers:
Comments:
Year
(cont.)
52-57
40 SERIES
4.000" (101.6 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.272" (57.709 MM)
GAS, 4O SERIES, 320/330 & M SERIES TRACTORS * SERIES 320 PRIOR-SERIAL #320,885: 2.249-2.250
JOHN DEERE
1.6
100
Stroke: 5.0000" (127. MM)

2.0610-2.0620" (52.349-52.375 MM)
Rods:
2.0610-2.0620" (52.349-52.375 MM)
Main:
Main:
H225R
Casting Numbers:
Comments:
H TRACTOR UP-SERIAL #21499
JOHN DEERE
1.6
100
52-57
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
#1 2.3970-2.3980" (60.884-60.909 MM)
Main:
Main Fillet:
Main:
Thrust Width:
M1692T, M1692T, M3114T, M3114T, M450T, M450T
Casting Numbers:
Comments:
40, 320/330 & M SERIES TRACTORS
JOHN DEERE
1.7
101
1.8
40
113
1.9
1.9
113
420
1.9
4.250" (107.95 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.272
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
113
430
Stroke: 4.000" (101.6 MM)

2.4980-2.4990" (63.449-63.475 MM)
Rods:
#1 2.3970-2.3980" (60.884-60.909 MM)
Main:
Main:
M1692T, M1692T, M3114T, M450T, M450T
Casting Numbers:
Comments:
430 GAS TRACTOR
JOHN DEERE
4.2500" (107.95 MM)

.094" (2.388 MM)
.094
2.272
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.000" (101.6 MM)

2.4980-2.4990" (63.449-63.475 MM)
Rods:
#1 2.3970-2.3980" (60.884-60.909 MM)
Main:
Main:
M1692T, M1692T, M3114T, M450T, M450T
Casting Numbers:
Comments:
420 GAS TRACTOR
JOHN DEERE
4.2500" (107.95 MM)

.094" (2.388 MM)
.094
2.272
420
Stroke: 4.0000" (101.6 MM)

2.4980-2.4990" (63.449-63.475 MM)
Rods:
2.3970-2.3980" (60.884-60.909 MM)
Main:
Main:
Comments:
420 430 & 440 TRACTORS
JOHN DEERE
4.250" (107.95 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.272
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
113
440
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
#1 2.3970-2.3980" (60.884-60.909 MM)
Main:
Main Fillet:
Main:
Thrust Width:
M1692T, M1692T, M3114T, M3114T, M450T, M450T
Casting Numbers:
Comments:
440 GAS TRACTORS
JOHN DEERE
2.4
149
Stroke: 5.500" (139.7 MM)

2.7485-2.7500" (69.812-69.85 MM)
Rods:
2.2480-2.2500" (57.099-57.15 MM)
Main:
Main:
B1303R, B2460R
Casting Numbers:
Comments:
B SERIES, 4.250" X 5.250" TO S/N 59999
40 SERIES
4.000" (101.6 MM)

.094" (2.388 MM)
.094
2.272
Stroke: 4.0000" (101.6 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
2.3970-2.3980" (60.884-60.909 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
M, 40, 320, 330 TRACTORS *M450T CRANKS 2.2490-2.5000"
JOHN DEERE
45-55
3.5620-3.5630" (92.075 MM)
Cyl Bore:
EARLY
4.250" (107.95 MM)

.094" (2.388 MM)
.094" (2.388 MM)
2.272
B
Cyl Bore:
282
32-46
4.250" (107.95 MM)
B SERIES

Make
Liter
CID
Vin
Model
JOHN DEERE
JOHN DEERE
2 Cylinders
2.9
175
Stroke: 5.500" (139.7 MM)

2.7485-2.7500" (69.812-69.85 MM)
Rods:
2.2480-2.2500" (57.099-57.15 MM)
Main:
Main:
B1303R, B2460R
Casting Numbers:
Comments:
Year
Engine Model
(cont.)
B SERIES
4.500" (114.3 MM)
Cyl Bore:
B SERIES, 4.500" X 5.500" FROM S/N 200999
JOHN DEERE
2.9
175
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.7485-2.7500" (69.812-69.85 MM)
Rods:
Rod Fillet:
#1 2.2480-2.2500" (57.099-57.15 MM)
Main:
Main Fillet:
Main:
Thrust Width:
B114R, B1303R, B1340R, B1847R, B2460R, B767R
Casting Numbers:
JOHN DEERE
3.1
190
Stroke: 5.500" (139.7 MM)

2.7485-2.7500" (69.812-69.85 MM)
Rods:
RIGHT 2.6235-2.6245" (66.637-66.662 MM)
Main 1:
LEFT 2.2485-2.2495" (57.112-57.137 MM)
Main:
Main 2:
B3019R
Casting Numbers:
Comments:
GAS, 50 SERIES
JOHN DEERE
3.1
3.1
190
3.1
35-45
520
190
50 SERIES
4.688" (119.075 MM)
520 SERIES
4.688" (119.075 MM)
Cyl Bore:
Stroke: 5.500" (139.7 MM)

2.8740-2.8750" (73.-73.025 MM)
Rods:
RIGHT 2.8735-2.8745" (72.987-73.012 MM)
Main 1:
LEFT 2.2485-2.2495" (57.112-57.137 MM)
Main:
Main 2:
Comments:
GAS, 530 SERIES
JOHN DEERE
50
Cyl Bore:
Stroke: 5.500" (139.7 MM)

2.8740-2.8750" (73.-73.025 MM)
Rods:
RIGHT 2.8735-2.8745" (72.987-73.012 MM)
Main 1:
LEFT 2.2485-2.2495" (57.112-57.137 MM)
Main:
Main 2:
B3729R
Casting Numbers:
Comments:
GAS, 520 SERIES
JOHN DEERE
4.500" (114.3 MM)

.188" (4.775 MM)
.188
2.743
530
530 SERIES
4.688" (119.075 MM)
Cyl Bore:
190
4.688" (119.075 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.7485-2.7500" (69.812-69.85 MM)
.188" (4.775 MM)
Rods:
Rod Fillet:
#1 2.2485-2.2495" (57.112-57.137 MM)
.125
Main:
Main Fillet:
2.743
Main:
Thrust Width:
B114R, B114R, B1303R, B1303R, B1340R, B1340R, B1847R, B1847R, B2460R, B2460R, B767R, B767R
Casting Numbers:
JOHN DEERE
5.0
303
Stroke: 6.375" (161.925 MM)

3.3735-3.3750" (85.687-85.725 MM)
Rods:
RIGHT 3.9990-4.0000" (101.575-101.6 MM)
Main 1:
LEFT 2.7490-2.7500" (69.825-69.85 MM)
Main:
Main 2:
F5638R
Casting Numbers:
Comments:
GAS, 620, 630 TRACTORS, 620 1956-58, 630 1958-60
JOHN DEERE
5.3
321
Stroke: 6.750" (171.45 MM)

2.9985-3.0000" (76.162-76.2 MM)
Rods:
RIGHT 2.9990-3.0000" (76.175-76.2 MM)
Main 1:
LEFT 2.7490-2.7500" (69.825-69.85 MM)
Main:
Main 2:
A4902R, R4390R
Casting Numbers:
Comments:
GAS, 60 SERIES
JOHN DEERE
5.3
630
56-60
5.5000-5.0010 " (139.7-139.725 MM)
Cyl Bore:
60
5.500" (139.7 MM)
Cyl Bore:
321
34-52
5.500" (139.7 MM)

Stroke: 6.750" (171.45 MM)
Cyl Bore:
2.9985-3.0000" (76.162-76.2 MM)
.188" (4.775 MM)
Rods:
Rod Fillet:
#1 2.7490-2.7500" (69.825-69.85 MM)
.188
Main 1:
Main Fillet:
#2 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main 2:
0, 0, 0, 0, 0, 0, A2360R, A3320R, A3322R, A4202R, A4390R, A4395R, A4902R
Casting Numbers:
Comments:
MODEL A GAS TRACTOR, EARLY ENG HAVE A 6.5" STROKE
283

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
2 Cylinders
5.9
361
(cont.)
720
Stroke: 6.375" (161.925 MM)

3.7480-3.7490" (95.199-95.225 MM)
Rods:
RIGHT 3.9990-4.0000" (101.575-101.6 MM)
Main 1:
LEFT 3.2490-3.2500" (82.525-82.55 MM)
Main 2:
F2729R
Casting Numbers:
Comments:
Engine Model
5.9996-6.0010" (152.39-152.425 MM)
Cyl Bore:
GAS, 720, 730 TRACTOR
JOHN DEERE
5.9
361
730
Stroke: 6.375" (161.925 MM)

3.7480-3.7490" (95.199-95.225 MM)
Rods:
RIGHT 3.9990-4.0000" (101.575-101.6 MM)
Main 1:
LEFT 3.2490-3.2500" (82.525-82.55 MM)
Main:
Main 2:
Comments:
ALL FUEL, 720, 730 TRACTOR
JOHN DEERE
5.9
6.000" (152.4 MM)
Cyl Bore:
362
720
Stroke: 6.375" (161.925 MM)

Cyl Bore:
3.7480-3.7490" (95.199-95.225 MM)
Rods:
1 & 3 4.4980-4.4990" (114.249-114.275 MM)
Main 1:
2 4.4975-4.4985" (114.237-114.262 MM)
Main:
Main 2:
F1910R, F2729R, F2792R, F3315R, F3560R, F3561R
Casting Numbers:
Comments:
720 DIESEL TRACTOR
JOHN DEERE
6.2
376
Stroke: 6.375" (161.925 MM)

3.7485-3.7495"
Rods:
#1 4.4980-4.4990" (114.249-114.275 MM)
Main:
Main:
F1910R, F3560R, F3561R
Casting Numbers:
Comments:
70 DIESEL TRACTOR, SEE 730 SPECS ALSO
JOHN DEERE
6.2
376
Stroke: 6.375" (161.925 MM)

3.7480-3.7490" (95.199-95.225 MM)
Rods:
#1 4.4975-4.4985" (114.237-114.262 MM)
Main:
Main:
Comments:
730 DIESEL TRACTOR
JOHN DEERE
6.2
6.8
6.8
55-55
6.125" (155.575 MM)
730
379
6.125" (155.575 MM)
70
413
50-57
5.875" (149.225 MM)
Cyl Bore:
Stroke: 7.000" (177.8 MM)

3.3740-3.3750" (85.7-85.725 MM)
Rods:
#1 2.9980-3.0000" (76.149-76.2 MM)
Main:
Main:
F34R
Casting Numbers:
Comments:
G GAS TRACTOR
JOHN DEERE
70
Cyl Bore:
Cyl Bore:
Stroke: 7.000" (177.8 MM)

3.3735-3.3750" (85.687-85.725 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
F1115R, F1223R
Casting Numbers:
Comments:
70 GAS TRACTOR
JOHN DEERE
6.000" (152.4 MM)
416
38-53
6.125" (155.575 MM)
Cyl Bore:
R SERIES
49-54
416 DIESEL
5.750" (146.05 MM)

Stroke: 8.000" (203.2 MM)
Cyl Bore:
3.9985-4.0000" (101.562-101.6 MM)
.281" (7.137 MM)
Rods:
Rod Fillet:
#1 3.9990-4.0000" (101.575-101.6 MM)
.250
Main:
Main Fillet:
3.270
Main:
Thrust Width:
F34R, R340R, R614R
Casting Numbers:
Comments:
R SERIES DIESEL TRACTOR STARTING MOTOR CRANK DIMENSIONS, MAIN=1.499-1.500"RODS =
1.3730-1.3740"
JOHN DEERE
Stroke:
Rods:
7.7
8.0000" (203.2 MM)

3.9991-4.0005" (101.577-101.613 MM)
472
820
Cyl Bore:
Rod Width:
4.4980-4.4990" (114.249-114.275 MM)
Main:
Main:
R1303R
Casting Numbers:
Comments:
80, 820, 830 TRACTORS, DIESEL * CENTER MAIN = .0016-.0050"
284
50-59
6.1246-6.1260" (155.565-155.6 MM)
2.376" (60.350 MM)

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
2 Cylinders
8.2
501
(cont.)
Stroke: 7.000" (177.8 MM)

3.4490-3.5000" (87.605-88.9 MM)
Rods:
#1 2.9980-3.0000" (76.149-76.2 MM)
Main:
Main:
D GAS TRACTOR
Comments:
6.7490-6.7500" (171.425-171.45 MM)
Cyl Bore:
JOHN DEERE
JOHN DEERE
Engine Model
3 Cylinders
0.0
3TG66
3TG66
3TG72
3TG72
1.4150-" (35.941 MM)

Rods:
1.6110-" (40.919 MM)
Main:
Main:
GAS, YANMAR, MOWER F912, GARDEN TRACTOR 322
Comments:
JOHN DEERE
0.0
1.5720-" (39.929 MM)

Rods:
1.7300-" (43.942 MM)
Main:
Main:
Comments:
GAS, YANMAR MOWER F932
JOHN DEERE
0.8
48
Stroke: 2.835" (72.000 MM)

1.4161-1.4165" (35.970-35.980 MM)
Rods:
1.5736-1.5740" (39.970-39.980 MM)
Main:
Main:
Comments:
DIESEL, YANMAR
JOHN DEERE
0.9
54
Stroke: 2.835" (72.009 MM)

1.5736-1.5740" (39.969-39.98 MM)
Rods:
1.7311-1.7315" (43.97-43.98 MM)
Main:
Main:
Comments:
3009 DIESEL, YANMAR ENGINE, 755/756 TRACTOR
JOHN DEERE
1.0
3TNE68
3TNA72
61
1.0
3TNA72
2.835" (72.009 MM)
Cyl Bore:
3TN75
Stroke: 2.953" (75.006 MM)

Cyl Bore:
1.6910-1.6914" (42.951-42.962 MM)
Rods:
1.8485-1.8489" (46.952-46.962 MM)
Main:
Main:
Comments:
855/856 TRACTOR DIESEL, YANMAR, DIRECT INJECTION
JOHN DEERE
3TNE68
22.6772-2.6783" (68.000-68.030 MM)
Cyl Bore:
61
3TN75RJ
2.953" (75.006 MM)
750
81-88
3TNE74
2.9134-2.9146" (74.000-74.030 MM)
Cyl Bore:
1.5736-1.5740" (39.970-39.980 MM)

Rods:
1.7311-1.7315" (43.970-43.980 MM)
Main:
Main:
Comments:
DIESEL, 750, YANMAR 3TNE74, INDIRECT INJECTION
JOHN DEERE
1.2
70
Stroke: 3.150" (80.01 MM)

1.6910-1.6914" (42.951-42.962 MM)
Rods:
1.8485-1.8489" (46.952-46.962 MM)
Main:
Main:
Comments:
3011 DIESEL, YANMAR ENGINE, DIRECT INJECTION
JOHN DEERE
1.2
75
Stroke: 3.386" (86.004 MM)

1.6910-1.6914" (42.951-42.962 MM)
Rods:
1.8485-1.8489" (46.952-46.962 MM)
Main:
Main:
Comments:
DIESEL, YANMAR, DIR INJ
JOHN DEERE
1.3
JOHN DEERE
1.3
3TNC78
3.071" (78.003 MM)
3TN78
78
3TN78
3.071" (78.003 MM)
Cyl Bore:
Stroke: 3.3464" (84.999 MM)

1.9665-1.9669" (49.949-49.959 MM)
Rods:
1 2.7539-2.7543" (69.949-69.959 MM)
Main 1:
INT 2.7539-2.7543" (69.949-69.959 MM)
Main:
Main 2:
3T8018
Casting Numbers:
Comments:
750 YANMAR DIESEL
Stroke: 3.3464" (84.999 MM)

1.9665-1.9669" (49.949-49.959 MM)
Rods:
1 2.7539-2.7543" (69.949-69.959 MM)
Main 1:
INT 2.7539-2.7543" (69.949-69.959 MM)
Main:
Main 2:
3T8018
Casting Numbers:
Comments:
850 YANMAR DIESEL
3TNC78
Cyl Bore:
380UJ
Thrust Width:
78
750
3.1496" (80. MM)
Cyl Bore:
@ #3
3T80J
Cyl Bore:
Thrust Width:
285
850
3.1496-3.1508" (80.-80.03 MM)
@ #3

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
3 Cylinders
1.4
83
87
3TN84
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main:
3T84
Casting Numbers:
Comments:
DIESEL, 955 & 3014 TRACTOR, YANMAR ENG, DIR INJ
JOHN DEERE
1.6
100
1.7
105
1.7
3T90J
JOHN DEERE
2.2
135
2.7
152
164
2.7
@ #3
1020 TRACTOR
3.8581-3.8595" (97.996-98.031 MM)
.109" (2.769 MM)
1.505" (38.227 MM)
Thrust Width:
1.537
820, 830 & 1020 T
286
164 GAS
4.0150-4.0164" (101.981-102.017 MM)
360 DOZER
Stroke: 4.313" (109.55 MM)

Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
T23517T
Casting Numbers:
Comments:
DIESEL,350 DOZER,1020,1520,1530,2020,2040 TRACTORS
152 DIESEL
3.8581-3.8595" (97.996-98.031 MM)

.188" (3/16)
.109" (7/64)
1.537 @ #5
1520 TRACTOR
Cyl Bore:
164
3T90TJ
3.5433" (90. MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.313" (109.55 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
T2351C
Casting Numbers:
Comments:
GAS, 1520 TRACTOR
JOHN DEERE
1.182 @ #3
Thrust Width:
Stroke: 4.328" (109.931 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
T23516T
Casting Numbers:
Comments:
DIESEL, 820, 830, 1020 TRACTORS
JOHN DEERE
Thrust Width:
3T90TJ
3.1235-3.1245" (79.337-79.362 MM)

Main:
Main:
T23484T
Casting Numbers:
Comments:
1020 GAS TRACTOR, 350 DOZER
2.5
3.5433-3.5445" (90.-90.03 MM)
Cyl Bore:
3.860" (98.044 MM)

2.3085-2.3095" (58.636-58.661 MM)
JOHN DEERE
3T90J
Cyl Bore:
105
Stroke: 3.5433" (90. MM)

2.1240-2.1244" (53.95-53.96 MM)
Rods:
FRONT 2.7539-2.7543" (69.949-69.959 MM)
Main 1:
CENTR 2.7539-2.7543" (69.949-69.959 MM)
Main:
Main 2:
REAR 3.5413-3.5417" (89.949-89.959 MM)
Main 3:
3T84
Casting Numbers:
Comments:
850, 950, 1050, TURBO YANMAR DIESEL
Stroke:
Rods:
3TNE88
3.4646-3.4657" (88.000-88.030 MM)
Cyl Bore:
Stroke: 3.5433" (90. MM)

2.1240-2.1244" (53.95-53.96 MM)
Rods:
FRONT 2.7539-2.7543" (69.949-69.959 MM)
Main 1:
CENTR 2.7539-2.7543" (69.949-69.959 MM)
Main:
Main 2:
REAR 3.5413-3.5417" (89.949-89.959 MM)
Main 3:
3T84
Casting Numbers:
Comments:
MODEL 950, 1050, YANMAR DIESEL
JOHN DEERE
3TN84RJ
3.307" (83.998 MM)
3TNE88
Stroke: 3.543" (90.000 MM)

1.8879-1.8883" (47.952-47.962 MM)
Rods:
2.1240-2.1245" (53.952-53.962 MM)
Main:
Main:
Comments:
DIESEL, YANMAR ENGINE
JOHN DEERE
3TN82
3.2283-3.2295" (81.999-82.029 MM)
Cyl Bore:
1.4
(cont.)
3TN82
Stroke: 3.386" (86.004 MM)

1.8879-1.8883" (47.953-47.963 MM)
Rods:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main:
3TNA82, DIESEL, YANMAR, DIR INJ
Comments:
JOHN DEERE
Engine Model
164 DIESEL
4.0150-4.0164" (101.981-102.017 MM)

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
3 Cylinders
2.9
JOHN DEERE
179
Stroke: 4.330" (109.982 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
TURBO DIESEL
Comments:
2.9
JOHN DEERE
2.9
179
179
2.9
179
179 TURBO DIE
179 DIESEL
4.192" (106.477 MM)
.165-.175" (4.191-4.445 MM)
.146-.156" (3.708-3.962 MM)
1.531-1.535
3029D
300 SERIES
Cyl Bore:
4.193" (106.502 MM)
Main Fillet:
Thrust Width:
.146-.156
1.532-1.536
Stroke: 4.331" (110.007 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
R101223
Casting Numbers:
Comments:
METRIC 300 SERIES TURBO DIESEL
3029T
300 SERIES TR
Cyl Bore:
4.193" (106.502 MM)
Main Fillet:
Thrust Width:
.146-.156
1.532-1.536
JOHN DEERE
JOHN DEERE
Casting Numbers:
Comments:
(cont.)
4.190" (106.426 MM)

.165-.175" (4.191-4.445 MM)
.146-.156" (3.708-3.962 MM)
1.531-1.535"
2240
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.331" (110.007 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
R101223
Casting Numbers:
Comments:
METRIC 300 SERIES DIESEL CASTING # R101223
JOHN DEERE
179T
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.330" (109.982 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
DIESEL 2240 TRACTOR
JOHN DEERE
Engine Model
4 Cylinders
0.0
1.8
111
190
190
B3729R
GAS, MODEL 1650
JOHN DEERE
4TN82
Stroke: 3.389" (86.081 MM)

1.8879-1.8883" (47.953-47.963 MM)
Rods:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main:
Comments:
DIESEL, YANMAR, 750 SKID LOADER
JOHN DEERE
1.9
115
Stroke: 3.000" (76.2 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
Comments:
1010 SERIES GAS TRACTORS
JOHN DEERE
1.9
1.9
1010 SERIES
3.500" (88.9 MM)

.109" (7/64)
.109" (7/64)
1.506
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.500" (88.9 MM)

.109" (2.769 MM)
.109
1.506
116
4TN84
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main:
Comments:
4019D DIESEL, YANMAR ENGINE, TURBO & NON-TURBO
JOHN DEERE
2.2
58-63
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
115
115
Stroke: 3.000" (76.2 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T13048T, T17885T
Casting Numbers:
JOHN DEERE
4TN82
3.2280-3.2300" (81.991-82.042 MM)
Cyl Bore:
134
Stroke: 3.543" (90.000 MM)

1.8879-1.8883" (47.952-47.962 MM)
Rods:
2.1240-2.1245" (53.952-53.962 MM)
Main:
Main:
Comments:
DIESEL, YANMAR ENGINE, DIRECT INJECTION
4TN84
3.307" (83.998 MM)
4TNE88
Cyl Bore:
287
4TNE88
3.4646-3.4657" (88.000-88.030 MM)

Make
Liter
CID
Vin
Model
JOHN DEERE
JOHN DEERE
4 Cylinders
2.4
145
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
1010 & 2010 DIESEL TRACTOR
Comments:
JOHN DEERE
2.4
2.5
145
2.7
165
Stroke: 5.000" (127. MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
Comments:
2010 DIESEL TRACTOR
JOHN DEERE
2.7
3.0
3.1
3.1
186
3.1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.625" (92.075 MM)

.109" (2.769 MM)
.109
1.506
JOHN DEERE
3.3
145 GAS
2010 TRACTOR
165 DIESEL
Cyl Bore:
3.8750-3.8760" (98.425-98.45 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.875" (98.425 MM)

.109" (2.769 MM)
.109
1.506
2020
186
3.8579-3.8590" (97.991-98.019 MM)
Thrust Width:
186
180 GAS
3.860" (98.044 MM)
@ #5
2020
Thrust Width:
190
186 DIESEL
3.8579-3.8590" (97.991-98.019 MM)
Cyl Bore:
@ #5
1450
Stroke: 4.330" (109.982 MM)

Cyl Bore:
2.2810-2.2820" (57.937-57.963 MM)
Rods:
2.6750-2.6760" (67.945-67.970 MM)
Main:
Main:
Comments:
DIESEL, 1450 {& 1650 TRACTORS, 4T95J YANMAR ENGINE
Stroke: 4.000" (101.6 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R26530, R26530R
Casting Numbers:
Comments:
3010 GAS TRACTOR
58-63
3.625" (92.075 MM)

.109" (7/64)
.109" (7/64)
1.506
Cyl Bore:
Stroke: 3.860" (98.044 MM)

2.3085-2.3100" (58.636-58.674 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
T23483T
Casting Numbers:
Comments:
2020 DIESEL TRACTOR
JOHN DEERE
2010 & HA SERIE
Cyl Bore:
Stroke: 3.860" (98.044 MM)

2.3085-2.3100" (58.636-58.674 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
T23483T
Casting Numbers:
Comments:
2020 GAS TRACTOR
JOHN DEERE
115 DIESEL
3.6250" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.506" (38.252 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
180
Stroke: 3.860" (98.044 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
Comments:
GAS, 2020 TRACTOR, JD400 WHEEL LOADER
JOHN DEERE
(cont.)
165
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T17150T, T20030T, T23488T, T632T
Casting Numbers:
JOHN DEERE
Engine Model
155
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T17150T, T20030T, T23488T, T632T
Casting Numbers:
JOHN DEERE
1010 & 2010 TRACT

Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T499T, T632T
Casting Numbers:
Comments:
2010 & HA SERIES GAS TRACTORS
JOHN DEERE
Year
201
4T95J
3.7400-3.7410" (95.000-95.030 MM)
3010
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
288
201 GAS
4.000" (101.6 MM)
.141" (3.581 MM)
.141" (3.581 MM)
1.753

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
4 Cylinders
3.3
202
Stroke: 4.330" (109.982 MM)

2.3085-2.3100" (58.636-58.674 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
GAS
Comments:
JOHN DEERE
3.3
JOHN DEERE
Stroke:
Rods:
3.6
219
219
JOHN DEERE
Stroke:
Rods:
3.6
219
454
#1 3.1236-3.1244" (79.339-79.36 MM)

Main:
Main:
R23517, T23480T, T23517T
Casting Numbers:
Comments:
454, 2030,2520,4020,J410,J440 JD450,DIESEL TRACTOR
JOHN DEERE
3.7
227
3020
JOHN DEERE
3.9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
239
239T
Stroke: 4.331" (110.007 MM)

2.7480-2.7488" (69.799-69.82 MM)
Rods:
3.1236-3.1244" (79.339-79.36 MM)
Main:
Main:
23909, R81959, T23266
Casting Numbers:
Comments:
TURBO & AFTERCOOLED DIESEL
JOHN DEERE
3.9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
239
2750
Stroke: 4.331" (110.007 MM)

2.7480-2.7488" (69.799-69.82 MM)
Rods:
3.1236-3.1244" (79.339-79.36 MM)
Main:
Main:
R81959, T23266
Casting Numbers:
Comments:
DIESEL, 2750
JOHN DEERE
3.9
Stroke: 4.331" (110.007 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Balance: Internal
97926, 97928, R979266
Casting Numbers:
Comments:
DIESEL, METRIC 300 SERIES
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
239
219 GAS
4.0150-4.0164" (101.981-102.017 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Stroke: 4.000" (101.6 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R26530R
Casting Numbers:
Comments:
3020 GAS TRACTOR
219 TURBO DIE

4.020" (102.108 MM)
.141" (3.581 MM)
1.591" * REPORTED # 1957 08/29/02 MC
.141" (3.581 MM)
1.537
2030
Cyl Bore:
4.330" (109.982 MM)

2.7480-2.7488" (69.799-69.82 MM)
@ #5
2020
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Stroke: 4.330" (109.982 MM)

2.3095-2.3103" (58.661-58.682 MM)
Rods:
#1 3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
R23517, T23480T, T23517T, T28743T
Casting Numbers:
Comments:
2030 GAS TRACTOR
202 DIESEL
3.8579-3.8590" (97.991-98.019 MM)
Thrust Width:
#1 3.1236-3.1244" (79.339-79.36 MM)

Main:
Main:
T23480T, T23480T, T23517T, T23517T
Casting Numbers:
Comments:
450C, TURBO DIESEL, 2020, 2030, JD410, JD440
3.6
@ #5
2020 & 2510

Cyl Bore:
4.330" (109.982 MM)

2.7480-2.7488" (69.799-69.82 MM)
JOHN DEERE
3.8579-3.8590" (97.991-98.019 MM)
Thrust Width:
202
(cont.)
202
Cyl Bore:
Stroke: 4.330" (109.982 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
Comments:
2020, 2510, DIESEL
Engine Model
4039D
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
289
219 DIESEL
4.020" (102.108 MM)
.141" (3.581 MM)
1.591" * REPORTED # 1957 08/29/02 MC
.141" (3.581 MM)
1.537
64-67
227 GAS
4.2493-4.2507" (107.932-107.968 MM)

.141" (3.581 MM)
.141" (3.581 MM)
1.753
239 TURBO DIE

4.1920-4.1940" (106.477-106.528 MM)
.165-.175" (4.191-4.445 MM)
.146-.156
1.531-1.535
239 DIESEL
4.1920-4.1940" (106.477-106.528 MM)
.165-.175" (4.191-4.445 MM)
.146-.156
1.531-1.535
300 SERIES
4.1920-4.1940" (106.477-106.528 MM)
.165-.175" (4.191-4.445 MM)
.146-.156
1.532-1.536

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
4 Cylinders
3.9
239
Stroke: 4.331" (110.007 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
TURBO DIESEL, METRIC 300 SERIES, 2755, 6040
Comments:
JOHN DEERE
3.9
4.0
4.2
JOHN DEERE
4.2
JOHN DEERE
3010
61-63
Cyl Bore:
4.125" (104.775 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.125" (104.775 MM)

.141" (3.581 MM)
.141
1.753
R26540R, R26540R, R40570
4.4
270
4.4
4.5
4.5
3020
4270 DIESEL
Cyl Bore:
4.250" (107.95 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
4.250" (107.95 MM)

.141" (3.581 MM)
.141
270
4270
276
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
R54501
Casting Numbers:
Comments:
2155, DIESEL TRACTORS
JOHN DEERE
241 GAS
4.250" (107.95 MM)

.141" (3.581 MM)
.141" (3.581 MM)
1.753"
254
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main 1:
#2 3.3720-3.3730" (85.649-85.674 MM)
Main:
Main 2:
#3 3.3715-3.3725" (85.636-85.662 MM)
Main 3:
R26540R, R26540R, R40570, R40570
Casting Numbers:
Comments:
GAS ENGINE
JOHN DEERE
4.125" (104.775 MM)

.141" (3.581 MM)
.141
1.753
254
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
40570, R26540R, R46498
Casting Numbers:
Comments:
3020 DIESEL TRACTOR
JOHN DEERE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3010 & 3020
4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
3.3715-3.3725" (85.636-85.662 MM)
3.3715-3.3725" (85.636-85.662 MM)
3.3720-3.3730" (85.649-85.674 MM)
3.3715-3.3725" (85.636-85.662 MM)
3.3715-3.3725" (85.636-85.662 MM)
Casting Numbers:
4.193" (106.502 MM)

.165-.175" (4.191-4.445 MM)
.146-.156
1.532-1.536
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
Comments:
3010 DIESEL TRACTOR
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
300 SERIES TR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
241
Stroke: 4.000" (101.6 MM)

2.9980-2.9900" (76.149-75.946 MM)
Rods:
3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
Comments:
3010, 3020 GAS TRACTOR SER # 123000->
JOHN DEERE
4039T
(cont.)
241
Stroke: 4.125" (104.775 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R40720
Casting Numbers:
JOHN DEERE
Engine Model
2155
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
276
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
3.1235-3.1245" (79.337-79.362 MM)
Main:
Main:
R5450, R54501, R54501R
Casting Numbers:
Comments:
2630, 2640 TURBO DIESEL TRACTORS, 540B
2630
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
290
4.1920-4.1940" (106.477-106.528 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.531-1.535
276T
4.1920-4.1940" (106.477-106.528 MM)
.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.531-1.535

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
4 Cylinders
4.5
276
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
METRIC 300 SERIES, DIESEL
Comments:
JOHN DEERE
4.5
276
4.5
276
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
METRIC 300 SERIES, TURBO DIESEL
JOHN DEERE
4.5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
300 SERIES
276
300 SERIES TR
4.1920-4.1940" (106.477-106.528 MM)
.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.532-1.536" (38.913-39.014 MM)
4045TF275
Stroke: 5.000" (127.000 MM)

Cyl Bore:
3.0630-3.0640" (77.800-77.826 MM)
Rods:
Rod Fillet:
3.1230-3.1240" (79.324-79.350 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
PWRTECH,TURBO DIESEL,TIER II,2 VLV HEAD, 4045HF275
6 Cylinders
3.5
217
65 & 95
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T182767, T23264, T23266, T633T
Casting Numbers:
Comments:
4045TF275
4.1920-4.1940" (106.477-106.528 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.532-1.536" (38.913-39.014 MM)
JOHN DEERE
JOHN DEERE
4045HF475
4.1920-4.1940" (106.477-106.528 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.532-1.536" (38.913-39.014 MM)
4045T
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
4.193" (106.502 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.532-1.536" (38.913-39.014 MM)
4045HF475
Stroke: 5.000" (127.000 MM)

3.0630-3.0640" (77.800-77.826 MM)
Rods:
3.1230-3.1240" (79.324-79.350 MM)
Main:
Main:
Comments:
POWERTECH, DIESEL, TIER II ENG, 4 VALVE HEAD
JOHN DEERE
4045D
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
58-63
217
3.625" (92.075 MM)

.109" (2.769 MM)
.109
1.506
65 & 95 COMBINE
JOHN DEERE
3.6
217
217
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T182767, T23264, T23266, T633T
Casting Numbers:
Comments:
65 & 95 COMBINE
JOHN DEERE
3.6
217
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T182767, T23264, T23266, T633T
Casting Numbers:
Comments:
GAS
JOHN DEERE
4.1
JOHN DEERE
4.9
217
58-63
217
3.6250" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.506
58-63
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.6250" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.506
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.875" (98.425 MM)

.109" (2.769 MM)
.109
1.506
217 GAS
248
Stroke: 3.500" (88.9 MM)

2.3085-2.3095" (58.636-58.661 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
T633T
Casting Numbers:
Stroke: 4.000" (101.6 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R26550R
Casting Numbers:
Comments:
4010 GAS
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
302
4010
Cyl Bore:
291
301 GAS
4.000" (101.6 MM)

Make
Liter
CID
Vin
Model
JOHN DEERE
JOHN DEERE
6 Cylinders
5.0
303
Stroke: 4.328" (109.931 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 3.1236-3.1244" (79.339-79.36 MM)
Main:
Main:
A102, A102R, R26550R, T23264T
Casting Numbers:
Comments:
Year
Engine Model
(cont.)
303
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
303 GAS
3.8581-3.8595" (97.996-98.031 MM)
1/8 (.128")
9/64 (.141")
1.537 @ #5
GAS TRACTOR
JOHN DEERE
5.0
303
Stroke: 4.328" (109.931 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
#1 3.1236-3.1244" (79.339-79.36 MM)
Main:
Main:
A102, A102R, R26550R, T23264T
Casting Numbers:
Comments:
JD550 & 570 DIESEL
JOHN DEERE
5.4
JD550
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
329
4030
Stroke: 4.330" (109.982 MM)

Cyl Bore:
2.7480-2.7488" (69.799-69.82 MM)
Rods:
Rod Fillet:
3.1236-3.1244" (79.339-79.36 MM)
Main:
Main:
Thrust Width:
T23266T, T23480T, T23517T
Casting Numbers:
Comments:
6-329 NON/TURBO DIESEL, 4030 TRACTOR, 57A GRADR
JOHN DEERE
5.4
329
DT
Stroke: 4.020" (102.108 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
#1 3.1240-3.1250" (79.35-79.375 MM)
Main:
Main:
T233266T
Casting Numbers:
Comments:
TURBO DIESEL, 544A LOADER
JOHN DEERE
5.4
5.6
5.6
5.9
544A
329 TURBO DIE
Cyl Bore:
4.0150-4.0160" (101.981-102.006 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.020" (102.108 MM)

.125" (3.175 MM)
.125
1.537
341
4020
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.2493-4.2507" (107.932-107.968 MM)

.141" (3.581 MM)
.141" (3.581 MM)
1.753
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.250" (107.95 MM)

.141" (3.581 MM)
.141
1.753
341
Stroke: 4.000" (101.6 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R26550R
Casting Numbers:
Comments:
GAS, 4020 & COMBINE
JOHN DEERE
1.537
6-329 GAS
Stroke: 4.000" (101.6 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R26550R
Casting Numbers:
Comments:
GAS, 4020 & COMBINE
JOHN DEERE
6-329 DIESEL
4.0155" (101.994 MM)
.109" (2.769 MM)
329
Stroke: 4.330" (109.982 MM)

2.7480-2.7488" (69.799-69.82 MM)
Rods:
#1 3.1236-3.1244" (79.339-79.36 MM)
Main:
Main:
T23264T, T23266
Casting Numbers:
Comments:
6-329 GAS TRACTORS
JOHN DEERE
3.8581-3.8595" (97.996-98.031 MM)

.128" (3.251 MM)
9/64 (.141")
1.537 @ #5
359
2940
6-359 DIESEL
4.192" (106.477 MM)

Stroke: 4.330" (109.982 MM)
Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
.165-.175" (4.191-4.445 MM)
Rods:
Rod Fillet:
3.1230-3.1240" (79.324-79.35 MM)
.146-.156
Main:
Main Fillet:
1.531-1.535
Main:
Thrust Width:
F1910R, F1910R, F2729R, F2729R, F2792R, F2792R, F3315R, F3315R, F3560R, F3560R, F3561R,
Casting Numbers:
F3561R, R40730, T23264T, T23264T
Comments:
6.359 DIESEL, 2940 + 2950 TRACTOR
292

Make
Liter
CID
Vin
Model
JOHN DEERE
JOHN DEERE
Year
Engine Model
6 Cylinders
5.9
359
359T
(cont.)
359 TURBO DIE
4.1920-4.1940" (106.477-106.528 MM)

Stroke: 4.331" (110.007 MM)
Cyl Bore:
2.7480-2.7488" (69.799-69.82 MM)
.165-.175" (4.191-4.445 MM)
Rods:
Rod Fillet:
3.1236-3.1244" (79.339-79.36 MM)
.146-.156
Main:
Main Fillet:
1.531-1.535
Main:
Thrust Width:
F1910R, F2729R, F2792R, F3315R, F3560R, F3561R, R40730, T23264T
Casting Numbers:
Comments:
TURBO & AFTERCOOLED DIESEL
JOHN DEERE
5.9
359
Stroke: 4.331" (110.007 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
JOHN DEERE
5.9
6059D
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
359
6059T
Stroke: 4.331" (110.007 MM)

Cyl Bore:
2.7480-2.7490" (69.799-69.825 MM)
Rods:
Rod Fillet:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
TURBO DIESEL, METRIC 300 SERIES THRUST BRG LENGTH 1.324-1.328
JOHN DEERE
5.9
300 SERIES
4.1920-4.1940" (106.477-106.528 MM)
.165-.175" (4.191-4.445 MM)
.146-.156
1.532-1.536
300 SERIES
4.193" (106.502 MM)
.165-.175" (4.191-4.445 MM)
.146-.156
1.532-1.536 @ #5
359
4.190" (106.426 MM)

Stroke: 4.330" (109.982 MM)
Cyl Bore:
2.7480-2.7488" (69.799-69.82 MM)
.172" (4.369 MM)
Rods:
Rod Fillet:
#1 3.1236-3.1244" (79.339-79.36 MM)
.250
Main 1:
Main Fillet:
#2 3.2490-3.2500" (82.525-82.55 MM)
1.537
Main:
Main 2:
Thrust Width:
4.0000" (101.6 MM)
Rear Seal Diameter:
F1910R, F1910R, F2729R, F2729R, F2792R, F2792R, F3315R, F3315R, F3560R, F3560R, F3561R,
Casting Numbers:
F3561R
JOHN DEERE
5.9
362
4020
Stroke: 4.250" (107.95 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
#1 3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R40730
Casting Numbers:
Comments:
GAS, 4020 & 7700 COMBINE
JOHN DEERE
6.2
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
381
4.2493-4.2507" (107.932-107.968 MM)

.141" (3.581 MM)
.141" (3.581 MM)
1.753
4010
4.125" (104.775 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
#1 3.3720-3.3730" (85.649-85.674 MM)
.141" (3.581 MM)
Main 1:
Main Fillet:
#2 4.9975-4.9985" (126.937-126.962 MM)
Main:
Main 2:
#3 4.9980-4.9990" (126.949-126.975 MM)
Main 3:
4.0000" (101.6 MM)
Rear Seal Diameter:
F1910R, F2729R, F2792R, F3315R, F3560R, F3561R, R26560, R26560R, R40570, R40740R
Casting Numbers:
Comments:
4010 DIESEL TRACTOR USES THRUST WASHERS
JOHN DEERE
6.6
404
4010
67-76
4.250" (107.95 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
9/64 (.141")
Rods:
Rod Fillet:
3.3715-3.3725" (85.636-85.662 MM)
9/64 (.141")
Main:
Main Fillet:
1.753" (44.526 MM) @ #5
Main:
Thrust Width:
2.340" (59.436 MM)
4.840" (122.936 MM)
Rear Seal Diameter:
R26540, R-26560, R26560R, R-26560R, R-40570, R40740R, R-40740R
Casting Numbers:
Comments:
4010, 4020, 4040, 4230, 4240, DIESEL, NON-TURBO
JOHN DEERE
6.6
404
4020
Stroke: 4.750" (120.65 MM)

Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
Rods:
Rod Fillet:
3.3715-3.3725" (85.636-85.662 MM)
Main:
Main Fillet:
Main:
Thrust Width:
R40740R
Casting Numbers:
Comments:
4020, 4320, 4430, 4630, DIESEL, TURBO,LATER SERIAL
293
4.2493-4.2507" (107.932-107.968 MM)

.141" (3.581 MM)
.141" (3.581 MM)
1.753" (44.526 MM) @ #5

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
6 Cylinders
6.6
404
(cont.)
4320
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.3715-3.3725" (85.636-85.662 MM)
Main:
Main:
R40740R
Casting Numbers:
Comments:
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
6404A
4.2493-4.2507" (107.932-107.968 MM)
.141" (3.581 MM)
.141" (3.581 MM)
1.753" (44.526 MM) @ #5
4320, 4620, DIESEL, TURBO 4520 S/N 245758->
JOHN DEERE
6.8
414
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
#1 3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
DIESEL
JOHN DEERE
6.8
414
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
#1 3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
TURBO DIESEL, 544C, D LOADER
JOHN DEERE
6.8
414
6.8
4.1920-4.1940" (106.477-106.528 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.531-1.535
544C
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 5.000" (127. MM)

3.0630-3.0640" (77.8-77.826 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
JOHN DEERE
414
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
414T
4.1920-4.1940" (106.477-106.528 MM)
.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.531-1.535
6068D
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
414
4.193" (106.502 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.532-1.536" (38.913-39.014 MM)
6068HF475
6068HF475
4.1920-4.1940" (106.477-106.528 MM)

Stroke: 5.000" (127.000 MM)
Cyl Bore:
3.0630-6.0640" (77.800-77.826 MM)
.146-.156" (3.708-3.962 MM)
Rods:
Rod Fillet:
3.1230-3.1240" (79.324-79.350 MM)
.146-.156" (3.708-3.962 MM)
Main:
Main Fillet:
1.532-1.536" (38.913-39.014 MM)
Main:
Thrust Width:
R116076, R5034700
Casting Numbers:
Comments:
POWERTECH, DIESEL, TIER II ENGINE, 4 VALVE HEAD CRANKSHAFTS CAN ONLY BE GROUND .010" &
.010"
JOHN DEERE
6.8
414
6068T
Stroke: 5.000" (127. MM)

Cyl Bore:
3.0630-3.0640" (77.8-77.826 MM)
Rods:
Rod Fillet:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main Fillet:
Main:
Thrust Width:
R54619
Casting Numbers:
Comments:
TURBO & AFTERCOOLED DIESEL, METRIC 300 SERIES
JOHN DEERE
6.8
414
4.193" (106.502 MM)

.146-.156" (3.708-3.962 MM)
.146-.156" (3.708-3.962 MM)
1.532-1.536" (38.913-39.014 MM)
6068TF275
6068TF275
4.1920-4.1940" (106.477-106.528 MM)

Stroke: 5.000" (127.000 MM)
Cyl Bore:
3.0630-3.0640" (77.800-77.826 MM)
.146-.156" (3.708-3.962 MM)
Rods:
Rod Fillet:
3.1230-3.1240" (79.324-79.350 MM)
.146-.156" (3.708-3.962 MM)
Main:
Main Fillet:
1.532-1.536" (38.913-39.014 MM)
Main:
Thrust Width:
R116076, R5034700
Casting Numbers:
Comments:
PWRTECH,TURBO DIESEL,TIER II,2 VLV HEAD, 6068HF275 CRANKSHAFT CAN ONLY BE GROUND .010" &
.010"
JOHN DEERE
7.6
466
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
ALL 3.3720-3.3730" (85.649-85.674 MM)
Main:
Main:
R26506, R26506R, R56919, R56979R
Casting Numbers:
Comments:
NON-TURBO, 4040, 4240
JOHN DEERE
7.6
466
4040 & 4240

Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
466 NON-TURB
4.5615-4.5635" (115.862-115.913 MM)

.155-.175" (3.937-4.445 MM)
.155-.175" (3.937-4.445 MM)
1.753" (44.526 MM) @ #5
4207, 6404, 6466
4.562" (115.875 MM)

Stroke: 4.750" (120.65 MM)
Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
.155-.175" (3.937-4.445 MM)
Rods:
Rod Fillet:
3.3720-3.3730" (85.649-85.674 MM)
.155-.175" (3.937-4.445 MM) *
Main:
Main Fillet:
1.750-1.752 @ #5
Main:
Thrust Width:
Comments:
DIESEL, INDUSTRIAL, 4207, 6404, 6466 * RADIUS FOR THRUST LOCATION: .150-.160
294
6466D

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
6 Cylinders
7.6
466
4440, 4450, 4640
Stroke: 4.750" (120.65 MM)

Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
Rods:
Rod Fillet:
ALL 3.3720-3.3730" (85.649-85.674 MM)
Main:
Main Fillet:
Main:
Thrust Width:
R56934, R56979, R56979R, R63451, RE53203, RE53204
Casting Numbers:
Comments:
(cont.)
6-466T TURBO
4.5615-4.5628" (115.862-115.895 MM)

.155-.175" (3.937-4.445 MM)
.155-.175" (3.937-4.445 MM) *
1.753" (44.526 MM) @ #5
6-466T TURBO DIESEL, 4440, 4450, 4640 * THRUST RADIUS = .150-.160"
JOHN DEERE
7.6
466
4650, 4850, 8440
Stroke: 4.750" (120.65 MM)

Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
Rods:
Rod Fillet:
ALL 3.3720-3.3730" (85.649-85.674 MM)
Main:
Main Fillet:
Main:
Thrust Width:
R56934, R56979, R56979R, R63451, RE53203, RE53204
Casting Numbers:
Comments:
6-466A TURBO DIESEL, 4650, 4850, 8440 * THRUST RADIUS = .150-.160"
JOHN DEERE
7.6
466
EARLY
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
ALL 3.3720-3.3730" (85.649-85.674 MM)
Main:
Main:
2.340" (59.436 MM)
R26506, R26506R, R56919, R87544A
Casting Numbers:
Comments:
DIESEL, BEFORE SERIAL #500000, 4960 TRACTOR
JOHN DEERE
7.6
466
JOHN DEERE
7.6
LATE
7.6
8.1
4.562" (115.875 MM)
Thrust Width:
1.753" (44.526 MM) @ #5
466
6466T
8.7
531
3.7480-3.7490" (95.199-95.225 MM)

Main:
Main:
AR35010, R35010R, R36350R
Casting Numbers:
Comments:
6531D DIESEL, 5010, 5020
6466T
Cyl Bore:
4.562" (115.875 MM)
Thrust Width:
1.753" (44.526 MM) @ #5
496
5.000" (127. MM)

3.4980-3.4990" (88.849-88.875 MM)
6466
Cyl Bore:
6081
Stroke: 5.059" (128.499 MM)

Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
Rods:
Rod Fillet:
3.7480-3.7491" (95.199-95.227 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL, 8000 SERIES TRACTORS * THRUST RADIUS: .140-.160"
JOHN DEERE
6076
4.5616-4.5628" (115.865-115.895 MM)
.155-.175" (3.937-4.445 MM)
.155-.175" (3.937-4.445 MM)
1.753" (44.526 MM) @ #5
6466
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.3720-3.3730" (85.649-85.674 MM)
Main:
Main:
R63451
Casting Numbers:
Comments:
TURBO, INDUSTRIAL, 6404T+A, 6466T+A
JOHN DEERE
6076
4.5615-4.5635" (115.862-115.913 MM)
.155-.175" (3.937-4.445 MM)
.155-.175" (3.937-4.445 MM)
1.753" (44.526 MM) @ #5
6076
466
Stroke: 4.750" (120.65 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.372-3.373" (85.649-85.674 MM)
Main:
Main:
Comments:
INDUSTRIAL
JOHN DEERE
6-466A TURBO
4.5616-4.5628" (115.865-115.895 MM)

.155-.175" (3.937-4.445 MM)
.155-.175" (3.937-4.445 MM) *
1.753" (44.526 MM) @ #5
6076
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.750" (120.65 MM)

Cyl Bore:
2.9980-2.9990" (76.149-76.175 MM)
Rods:
Rod Fillet:
ALL 3.3720-3.3730" (85.649-85.674 MM)
Main:
Main Fillet:
Main:
Thrust Width:
R26506, R26506R, R56919, R87544A, RE53203
Casting Numbers:
Comments:
TURBO DIESEL, AFTER SERIAL #499999
Stroke:
Rods:
Engine Model
94-06
4.560" (115.824 MM)
.158-.172" (4.013-4.369 MM)
.156-.175 *
1.7475-1.7515" (44.387-44.487 MM)
5010, 5020
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
295
531D DIESEL
4.7493-4.7507" (120.632-120.668 MM)

.250" (6.350 MM)
1.875" (47.625 MM)
.250" (6.350 MM)
1.875

Make
Liter
CID
Vin
Model
Year
JOHN DEERE
JOHN DEERE
6 Cylinders
8.7
531
Stroke: 5.000" (127. MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
3.7480-3.7490" (95.199-95.225 MM)
Main:
Main:
Balance: Internal
2.430" (61.722 MM)
6.000" (152.4 MM)
Rear Seal Diameter:
AR35010, AR69264, R35010R, R36350R
Casting Numbers:
Comments:
6030
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
60-81
Engine Model
(cont.)
531A DIESEL
4.7493-4.7507" (120.632-120.668 MM)

.250" (6.350 MM)
.250" (6.350 MM)
1.875
6531A, 6619A TURBO DIESEL 6030 TRACTORS
JOHN DEERE
10.1
619
6101
Stroke: 5.000" (127.000 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
3.7480-3.7490" (95.199-95.225 MM)
Main:
Main:
Comments:
DIESEL, BEGINNING W/SERIAL #500,000 AND UP
JOHN DEERE
10.2
619
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
6101 DIESEL
5.1246-5.1262" (130.165-130.205 MM)
.177-.191" (4.496-4.851 MM)
.155-.175"
1.873-1.877" (47.874-47.876 MM) @ #5
619
68-81
5.1245-5.1263" (130.162-130.208 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
3.4980-3.4990" (88.849-88.875 MM)
.177-.191" (4.496-4.851 MM)
Rods:
Rod Fillet:
3.7480-3.7490" (95.199-95.225 MM)
.155-.175
Main:
Main Fillet:
1.875
Main:
Thrust Width:
Balance: Internal
2.430" (61.722 MM)
6.000" (152.4 MM)
Rear Seal Diameter:
AR35010, AR69264, AR78403, R36350R, R63478
Casting Numbers:
Comments:
5020, 8640,8650 TRACTOR,DIESEL TURBO & AFTERCOOLED * .004-.011 END PLAY THRU SERIAL #032181,
AFTER SERIAL #039936 CRANK HAS OIL PUMP GEAR AND TWO THRUST BEARINGS ON THE REAR AND
ONE ON THE FRONT LOWER (CAP)
JOHN DEERE
10.2
619
8760, 8770
Stroke: 5.000" (127. MM)

Cyl Bore:
3.4980-3.4990" (88.849-88.875 MM)
Rods:
Rod Fillet:
3.7480-3.7490" (95.199-95.225 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
8760, 8770 TRACTOR, DIESEL TURBO & AFTERCOOLED
JOHN DEERE
10.5
641
6105
Stroke: 5.430" (137.922 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
4.9206-4.9219" (124.983-125.016 MM)
Main:
Main:
Comments:
AFTERCOOLED TURBOCHARGED
JOHN DEERE
10.9
12.5
766
6105
4.9996-5.0004" (126.99-127.01 MM)
Cyl Bore:
6125
Stroke: 6.5000" (165.1 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
4.9206-4.9219" (124.983-125.016 MM)
Main:
Main:
R115120
Casting Numbers:
Comments:
AFTERCOOLED TURBOCHARGED
Cyl Bore:
98-05
8 Cylinders
15.7
955
Stroke: 5.000" (127. MM)

4.0940-4.0950" (103.988-104.013 MM)
Rods:
#1 4.2490-4.2500" (107.925-107.95 MM)
Main:
Main:
R73021
Casting Numbers:
Comments:
6125 TURBO
4.9996-5.0004" (126.99-127.01 MM)
JOHN DEERE
JOHN DEERE
6105 TURBO
6105
Stroke: 5.4300" (137.922 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
4.9206-4.9219" (124.983-125.016 MM)
Main:
Main:
Comments:
AFTERCOOLED
JOHN DEERE
98-05
4.9996-5.0004" (126.990-127.010 MM)
Cyl Bore:
664
6101 DIESEL
5.1245-5.1263" (130.162-130.208 MM)

.177-.191" (4.496-4.851 MM)
.155-.175
1.873-1.877 (47.874-47.876 MM) @ #5
8850, 8955
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
8850, 8955, V-8 DIESEL * .007 O.S. THRUST AVLBL
296
75-85
955 DIESEL
5.5108-5.5118" (139.974-140. MM)

.188" (4.775 MM)
.109" (2.769 MM)
2.0906*

Make
Liter
CID
Vin
Model
Year
KAISER
KAISER
6 Cylinders
2.6
161
54-55
Stroke: 3.500" (88.9 MM)

1.8740-1.8750" (47.6-47.625 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
642462
Casting Numbers:
KAISER
Engine Model
3.7
Cyl Bore:
Rod Fillet:
3.125" (79.375 MM)

.094" (2.388 MM)
Thrust Width:
1.308
226
46-50
3.313" (84.15 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.0619-2.0627" (52.372-52.393 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.3744-2.3752" (60.31-60.33 MM)
Main:
1/8
Main:
Rear Seal Diameter:
F600C-217, F600C-500A, F600C-502A, F600C-506A, F600C-601, F600C-606C
Casting Numbers:
Comments:
SEE F-226 CONTINENTAL ENGINE CONTINENTAL ENGINE
KAWASAKI
KAWASAKI
Stroke:
Rods:
2 Cylinders
0.6
38
FD620D
2.677" (68.000 MM)

1.3357" (33.927 MM)
1.750" (44.500 MM)
Rod Width:
1.3350" (33.909 MM)
Main:
Main:
OHV, 4-STROKE, 90r V-TWIN, GAS, TORO LAWNMOWER
Comments:
KIA
KIA
FD620D
2.9913-2.9921" (75.980-76.000 MM)
Cyl Bore:
4 Cylinders
1.5
91
RIO
01-02
97
RIO
03-05
97
SEPHIA
94-96
1.5724-1.5731" (39.940-39.956 MM)

Rods:
1.9661-1.9668" (49.938-49.956 MM)
Main:
Main:
MFI, DOHC, 16 VALVES
Comments:
KIA
1.6
1.5726-1.5732" (39.940-39.956 MM)

Rods:
1.9662-1.9669" (49.938-49.956 MM)
Main:
Main:
Comments:
DOHC, 16 VALVE
KIA
1.6
3.0711-3.0714" (78.006-78.014 MM)

Stroke: 3.291" (83.591 MM)
Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
.062" (1.575 MM)
Rods:
Rod Fillet:
1.9660-1.9668" (49.936-49.957 MM)
.093" (2.362 MM)
Main:
Main Fillet:
.951" (24.155 MM) @ #4
Main:
Thrust Width:
Balance: Internal
1.190" (30.226 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
B6S7
Casting Numbers:
Comments:
SFI, SOHC, 8 VALVE, SEPHIA THRUST BEARING LENGTH STD .100" (2.540 MM)
KIA
1.6
97
Stroke: 3.290" (83.566 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9660-1.9668" (49.936-49.957 MM)
Main:
Main:
Comments:
SFI, SOHC, 16 VALVE, SEPHIA
KIA
1.6
97
Stroke: 3.290" (83.566 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9660-1.9668" (49.936-49.957 MM)
Main:
Main:
Comments:
SFI, DOHC, SEPHIA
KIA
1.8
SEPHIA
Cyl Bore:
SEPHIA
Cyl Bore:
109
T8
94-98
3.070" (77.978 MM)
95-97
3.070" (77.978 MM)
SEPHIA
99-04
3.1892-3.1897" (81.006-81.018 MM)

Stroke: 3.430" (87.000 MM)
Cyl Bore:
1.7693-1.7700" (44.940-44.958 MM)
Rods:
2.1629-2.1636" (54.938-54.956 MM)
Main:
Main:
Comments:
SPECTRA , MFI, DOHC THRUST BRG WIDTH STD .0985-.1003" (2.500-2.550 MM)
297

Make
Liter
CID
Vin
Model
Year
KIA
KIA
4 Cylinders
1.8
112
Stroke: 3.350" (85.09 MM)

1.7693-1.7699" (44.94 TO 44.955 MM)
Rods:
1.9660-1.9668" (49.936 TO 49.957 MM)
Main:
Main:
1.190" (32.226 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
SFI, DOHC, SEPHIA, MAZDA ENGINE
Comments:
KIA
2.0
122
Stroke: 3.380" (85.852 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
Comments:
SFI, DOHC, SPORTAGE
KIA
2.0
122
2.4
SPORTAGE
95-02
95-97
3.3856-3.3866" (85.994-86.02 MM)
OPTIMA
01-05
3.4055-3.4067" (86.500-86.530 MM)
Cyl Bore:
KIA
KIA
95-98
3.386" (86.004 MM)
Cyl Bore:
144
Stroke: 3.937" (100.000 MM)

1.7709-1.7717" (44.980-45.000 MM)
Rods:
2.2434-2.2442" (56.982-57.000 MM)
Main:
Main:
Comments:
DOHC
(cont.)
3.270" (83.058 MM)

.062"
.093"
.951" (24.155 MM) @ #4
SPORTAGE
Cyl Bore:
Stroke: 3.380" (85.852 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
Comments:
SOHC, SFI, SPORTAGE, 8 VALVE, MAZDA BUILT
KIA
SEPHIA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
6 Cylinders
2.5
153
OPTIMA
-01
3.4134" (86.700 MM)
Cyl Bore:
1.8891-1.8898" (47.982-48.000 MM)

Rods:
2.4402-2.4409" (61.982-62.000 MM)
Main:
Main:
OPTIMA
Comments:
KIA
2.7
165
Stroke: 3.005" (76.327 MM)

1.8891-1.8898" (47.982-48.000 MM)
Rods:
2.4402-2.4409" (61.982-62.000 MM)
Main:
Main:
Comments:
OPTIMA
KIA
3.5
OPTIMA
213
Stroke: 3.372" (85.649 MM)

2.1646-2.1654" (54.982-55.000 MM)
Rods:
2.5190-2.5197" (63.982-64.000 MM)
Main:
Main:
F75E-AE
Casting Numbers:
Comments:
MFI, DOHC, SEDONA LX
SEDONA
1 Cylinder
0.1
CS4
Stroke: 1.968" (50.000 MM)

Cyl Bore:
1.1011-1.1017" (27.969-27.984 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
GAS, COMMAND PRO CS SERIES, 4HP, HORIZ CRANK
Comments:
KOHLER
0.2
Stroke: 2.000" (50.8 MM)

.9355-.9360" (23.762-23.774 MM)
Rods:
.9841-.9844" (24.996-25.004 MM)
Main:
Main:
Comments:
L-HEAD, K SERIES, 4 HORSEPOWER
KOHLER
02-04
3.6614" (93.000 MM)
Cyl Bore:
KOHLER
KOHLER
-01
3.4134" (86.700 MM)
Cyl Bore:
0.2
CS4
2.2049-2.2053" (56.005-56.015 MM)
K91
10
K91
2.3745-2.3755" (60.312-60.338 MM)
Cyl Bore:
CS6
Stroke: 1.970" (50.000 MM)

Cyl Bore:
1.1011-1.1017" (27.969-27.984 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
GAS, COMMAND PRO CS SERIES, 6 HP, HORIZ CRANK
298
CS6
2.5986-2.5990" (66.005-66.015 MM)

Make
Liter
CID
Vin
Model
Year
KOHLER
KOHLER
1 Cylinder
0.2
11
Stroke: 2.008" (51.003 MM)

1.2184-1.2189" (30.947-30.96 MM)
Rods:
FLY 1.2000-1.2003" (30.000-30.008 MM)
Main 1:
1.1988-1.1992" (29.971-29.980 MM)
Main 2:
GAS, OHV SINGLE, COMMAND 5 & 6 HP, CH5, CH6
Comments:
KOHLER
0.2
C5
15
0.3
(cont.)
C5, CH5, CH6
2.6378-2.6390" (67.000-67.031 MM)
Cyl Bore:
CS8.5
Stroke: 2.244" (57.000 MM)

Cyl Bore:
1.2586-1.2592" (31.969-31.984 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
GAS,251CC,COMMAND PRO CS SERIES,8.5 HP,HORIZ CRANK
KOHLER
Engine Model
16
CS8.5
2.9530-2.9533" (75.005-75.015 MM)
K141
K141
2.8745-2.8755" (73.012-73.038 MM)
Cyl Bore:
1.1855-1.1860" (30.112-30.124 MM)

Rods:
Comments:
2.875 BORE, L-HEAD, K SERIES, 6.25 HORSEPOWER
KOHLER
0.3
16
Stroke: 2.500" (63.5 MM)

1.1855-1.1860" (30.112-30.124 MM)
Rods:
Comments:
L HEAD, K SERIES, 7 HP, 4 STROKE, AIR COOLED
KOHLER
0.3
16
Stroke: 2.500" (63.5 MM)

1.1855-1.1860" (30.112-30.124 MM)
Rods:
1.1811-1.1814" (30.-30.008 MM)
Main:
Main:
Comments:
2.875 BORE, L-HEAD, K SERIES, 7 HORSEPOWER
KOHLER
0.3
0.3
K161
0.3
K141(2)
CS10
18
0.3
KOHLER
0.3
CS10
3.0709-3.0717" (78.000-78.020 MM)
CS8.5
Stroke: 2.480" (63.000 MM)

Cyl Bore:
1.4161-1.4167" (35.969-35.984 MM)
Rods:
3.1496" (80.000 MM)
Main 1:
2.8346" (72.000 MM)
Main:
Main 2:
Comments:
GAS,301CC, COMMAND PRO CS SERIES,8.5HP,HORIZ CRANK
KOHLER
19
K141, K161
2.9370-2.9380" (74.6-74.625 MM)
Cyl Bore:
18
Stroke: 2.750" (69.85 MM)

1.1855-1.1860" (30.112-30.124 MM)
Rods:
1.1811-1.1814" (30.-30.008 MM)
Main:
Main:
Comments:
K161 (7 HP)
2.8745-2.8755" (73.012-73.038 MM)
Stroke: 2.480" (63.000 MM)

Cyl Bore:
1.4161-1.4167" (35.969-35.984 MM)
Rods:
3.1496" (80.000 MM)
Main 1:
2.8346" (72.000 MM)
Main:
Main 2:
Comments:
KOHLER
K160
2.875" (73.025 MM)
Cyl Bore:
17
Stroke: 2.500" (63.500 MM)

1.1855-1.1860" (30.112-30.124 MM)
Rods:
1.1811-1.1814" (30.000-30.008 MM)
Main:
Main:
Comments:
ALSO K161, 2.9375 BORE,L-HEAD,K SERIES,6.25 HP
KOHLER
K160
Cyl Bore:
CS8.5
3.0709-3.0717" (78.000-78.020 MM)
K181
19
K181
2.9370-2.9380" (74.600-74.625 MM)
Cyl Bore:
M8
M8
2.938" (74.625 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.1855-1.1860" (30.112-30.124 MM) *
Rods:
1.1811-1.1814" (30.-30.008 MM)
Main:
Main:
Comments:
GAS, MAGNUM SERIES, 4 STROKE, L-HEAD SINGLE, 8 HP * .010 UNDERSIZE ROD AVLBL & CAN BE
IDENTIFIED BY A DRILLED HOLE IN ROD JUST ABOVE CRANKPIN BRG END.
KOHLER
0.4
22
CS12
Stroke: 2.480" (63.000 MM)

Cyl Bore:
1.4161-1.4167" (35.969-35.984 MM)
Rods:
3.1496" (80.000 MM)
Main 1:
2.8346" (72.000 MM)
Main:
Main 2:
Comments:
299
CS12
3.3465-3.3472" (85.000-85.020 MM)

Make
Liter
CID
Vin
Model
KOHLER
KOHLER
Engine Model
1 Cylinder
0.4
24
Stroke: 2.875" (73.025 MM)

1.4995-1.5000" (38.087-38.1 MM)
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
Year
0.4
(cont.)
K241
24
K241
3.2505-3.2515" (82.563-82.588 MM)
Cyl Bore:
M10
M10
3.251" (82.575 MM)

Stroke: 2.875" (73.025 MM)
Cyl Bore:
1.4995-1.5000 (38.087-38.1 MM) *
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
0.5
29
Stroke: 3.250" (82.55 MM)

1.4995-1.5000" (38.087-38.1 MM)
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
0.5
K301
29
K301
3.3745-3.3755" (85.712-85.738 MM)
Cyl Bore:
M12
M12
3.375" (85.725 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.4995-1.5000" (38.087-38.1 MM) *
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
0.5
31
Stroke: 3.250" (82.55 MM)

1.4995-1.5000" (38.087-38.1 MM)
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
0.5
K321
31
K321
3.4995-3.5005" (88.887-88.913 MM)
Cyl Bore:
M14
M14
3.500" (88.9 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.4995-1.5000" (38.087-38.1 MM) *
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
0.5
32
Stroke: 2.4409" (62.000 MM)

1.2578-1.2585" (31.948-31.966 MM)
Rods:
FLY END 1.7725-1.7735" (45.021-45.041 MM)
Main 1:
PTO 1.6107-1.6116" (40.912-40.935 MM)
Main:
Main 2:
Comments:
GAS, HORIZONTAL CRANK, OHC 16 HP
KOHLER
0.6
TH16
34
TH16
2.8742-2.8752" (73.006-73.031 MM)
Cyl Bore:
K330
K330, K331
3.625" (92.075 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.8730" (47.574 MM)
Rods:
Comments:
ALSO K331, 4 STROKE, 12.5 HP * .003-.008 END PLAY ON PUMP MODELS.
KOHLER
0.6
35
Stroke: 2.5590" (65.000 MM)

1.2578-1.2585" (31.948-31.966 MM)
Rods:
FLYWHEEL END 1.7725-1.7735" (45.021-45.041 MM)
Main 1:
PTO 1.6107-1.6116" (40.912-40.935 MM)
Main:
Main 2:
Comments:
GAS, HORIZONTAL CRANK, OHC 18 HP
KOHLER
0.6
36
Stroke: 3.250" (82.55 MM)

1.4995-1.5000" (38.087-38.1 MM)
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
0.6
Stroke: 3.2500" (82.55 MM)

1.4995-1.5000" (38.087-38.1 MM)
Rods:
BALL BEARING
Main:
Main:
Comments:
718H ALLIS CHALMERS
TH18
TH18
2.9537-2.9547" (75.025-75.050 MM)
Cyl Bore:
K341
36
K361
Cyl Bore:
300
K341
3.7495-3.7505" (95.237-95.263 MM)
Cyl Bore:
69-78
3.7500" (95.25 MM)
K361

Make
Liter
CID
Vin
Model
Year
KOHLER
KOHLER
1 Cylinder
0.6
36
Engine Model
(cont.)
M16
M16
3.750" (95.25 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.4995-1.5000 *" (38.087-38.1 MM)
Rods:
1.5745-1.5749" (39.992-40.002 MM)
Main:
Main:
Comments:
KOHLER
KOHLER
2 Cylinders
0.4
24
CH11
Stroke: 2.638" (67.000 MM)

Cyl Bore:
1.5338-1.5343" (38.958-38.970 MM)
Rods:
1.7682-1.7691" (44.913-44.935 MM)
Main 1:
1.6502-1.6510" (41.915-41.935 MM)
Main 2:
GAS,398CC,COMMAND 11HP,12.5HP,14HP, HORIZ CRANK
Comments:
KOHLER
0.4
24
CV11
Stroke: 2.638" (67.005 MM)

Cyl Bore:
1.5338-1.5343" (38.959-38.971 MM)
Rods:
1.7682-1.7691" (44.912-44.935 MM)
Main 1:
1.6502-1.6510" (41.915-41.935 MM)
Main:
Main 2:
Comments:
COMMAND,11HP, CV12.5 12.5HP, CV13 13HP, CV14 14HP
KOHLER
0.4
26
Stroke: 2.640" (67.056 MM)

1.5338-1.5343" (38.959-38.971 MM)
Rods:
1.7682-1.7691" (44.912-44.935 MM)
Main 1:
1.6502-1.6510" (41.915-41.935 MM)
Main:
Main 2:
Comments:
COMMAND, GAS, 15 HP, CV16 - 16 HP
KOHLER
0.5
KOHLER
0.5
KOHLER
0.6
0.6
CV490-495
34
CV17
0.6
LV560
38
KOHLER
0.6
CH18
38
301
CH18, 20, 22
3.0315-3.0325" (77.000-77.025 MM)
CV18
Cyl Bore:
LV560
2.8742-2.8752" (73.006-73.031 MM)
Cyl Bore:
Stroke: 2.638" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
COMMAND, CV18 18HP, CV20 20HP & CV22 22HP
CV17
2.8742-2.8752" (73.006-73.031 MM)
Stroke: 2.638" (67.000 MM)

Cyl Bore:
1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
GAS, 561 CC, 17 HP, LIQUID COOLED, VERTICAL CRANK
KOHLER
CV490-495
3.5433-3.5443" (90.000-90.025 MM)
Cyl Bore:
34
CV460-465
3.4252-3.4262" (87.000-87.025 MM)
Cyl Bore:
Stroke: 2.6378" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
GAS, ALSO CH20 & CH22 ENGINES
CV15, CV16
3.5433-3.5443" (90.000-90.025 MM)
CV460-465
30
Stroke: 2.638" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
COMMAND, 17 HORSEPOWER, VERTICAL CRANK
KOHLER
CV15
Cyl Bore:
Stroke: 3.031" (77.000 MM)

1.5338-1.5343" (38.958-38.971 MM)
Rods:
1.7682-1.7691" (44.913-44.935 MM)
Main 1:
1.6502-1.6510" (41.915-41.935 MM)
Main:
Main 2:
Comments:
COMMAND, GAS, 17 HP & 18 HP
CV11,12.5,13,14
3.4252-3.4262" (87.000-87.025 MM)
Cyl Bore:
28
Stroke: 3.031" (77.000 MM)

1.5338-1.5343" (38.958-38.971 MM)
Rods:
1.7682-1.7691" (44.913-44.935 MM)
Main 1:
1.6502-1.6510" (41.915-41.935 MM)
Main:
Main 2:
Comments:
COMMAND, GAS, 16 HP, 16.5 HP
CH11
3.4252-3.4262" (87.000-87.025 MM)
CV18, 20, 22
3.0315-3.0325" (77.000-77.025 MM)

Make
Liter
CID
Vin
Model
Year
KOHLER
KOHLER
2 Cylinders
0.6
38
Stroke: 2.638" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
GAS,18.7 HP, LIQUID COOLED, HORIZ CRANK
Comments:
KOHLER
0.6
LH630
KOHLER
0.7
41
KOHLER
0.7
KOHLER
0.7
CV22
0.7
LH685
LV675
42
0.7
KOHLER
0.7
LV675
3.1496-3.1506" (80.000-80.025 MM)
KT17
Stroke: 2.750" (69.85 MM)

Cyl Bore:
1.3733-1.3738" (34.882-34.895 MM)
Rods:
1.7412-1.7422" (44.226-44.252 MM)
Main:
Main:
Comments:
L-HEAD TWIN, ALUMINUM BLOCK, 17 HORSEPOWER
KOHLER
LH685
3.1496-3.1506" (80.000-80.025 MM)
Cyl Bore:
41
42
Stroke: 2.750" (69.85 MM)

1.3733-1.3738" (34.882-34.895 MM)
Rods:
1.7412-1.7422" (44.226-44.252 MM)
Main:
Main:
Comments:
AIR COOLED ENGINE
CV22
3.1496-3.1506" (80.000-80.025 MM)
Stroke: 2.638" (67.000 MM)

Cyl Bore:
1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
KOHLER
LV625
3.0315-3.0325" (77.000-77.025 MM)
Cyl Bore:
41
Stroke: 2.638" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
GAS, 21.3 HP, LIQUID COOLED, HORIZ CRANK
LH630
LV625
Stroke: 2.638" (67.000 MM)

Cyl Bore:
1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
Stroke: 2.638" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
(cont.)
3.0315-3.0325" (77.000-77.025 MM)
Cyl Bore:
38
Engine Model
KT17
3.1245-3.1255" (79.362-79.388 MM)
KT17QS
42
KT17QS
3.1245-3.1255" (79.362-79.388 MM)
Cyl Bore:
M18
M18
3.125" (79.375 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.3733-1.3738" (34.882-34.895 MM) *
Rods:
1.7488-1.7510" (44.42-44.475 MM)
Main:
Main:
Comments:
GAS, MAGNUM SERIES, L-HEAD TWIN, 18 HP * .010 UNDERSIZE ROD AVLBL
KOHLER
0.7
42
MV16
MV16
3.1245-3.1255" (79.362-79.388 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.3733-1.3738" (34.882-34.895 MM) *
Rods:
1.7488-1.7510" (44.42-44.475 MM)
Main:
Main:
Comments:
GAS, MAGNUM, L-HEAD TWIN, 16 HP NEW SLEEVE BRG ID (INSTALLED) 1.7439-1.7461". * .010
UNDERSIZE RODS AVLBL
KOHLER
0.7
42
MV18
MV18
3.1245-3.1255" (79.362-79.388 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.3733-1.3738" (34.882-34.895 MM) *
Rods:
1.7488-1.7510" (44.42-44.475 MM)
Main:
Main:
Comments:
GAS, 4 STROKE, L-HEAD TWIN, 18 HP NEW SLEEVE BEARING ID (INSTALLED) 1.7439-1.7461". * .010
UNDERSIZE ROD AVLBL
KOHLER
0.7
Stroke: 2.6378" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
GAS
44
CH25
Cyl Bore:
302
CH25
3.3195-3.3205" (82.988-83.013 MM)

Make
Liter
CID
Vin
Model
KOHLER
KOHLER
2 Cylinders
0.7
44
Stroke: 2.638" (67.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
KOHLER
0.7
0.8
CV25
(cont.)
CV25
LH750
LH750
3.2679-3.2689" (83.006-83.031 MM)
Cyl Bore:
47
Engine Model
3.2677" (83.000 MM)
Cyl Bore:
46
Stroke: 2.716" (69.000 MM)

1.4156-1.4163" (35.955-35.973 MM)
Rods:
1.6107-1.6116" (40.913-40.935 MM)
Main:
Main:
Comments:
GAS, 22.9 HP, LH 760 24.7 HP, HORIZ CRANK
KOHLER
Year
KT19
KT19
3.125" (79.375 MM)

Stroke: 3.062" (77.775 MM)
Cyl Bore:
1.4993-1.4998" (38.082-38.095 MM) *
Rods:
1.7412-1.7422" (44.226-44.252 MM)
Main:
Main:
Comments:
L-HEAD TWIN, ALUMINUM BLOCK, 19 HORSEPOWER * PRE-SERIES II: 1.3733-1.3738"
KOHLER
0.8
47
MV20
MV20
3.1245-3.1255" (79.362-79.388 MM)

Stroke: 3.062" (77.775 MM)
Cyl Bore:
1.4993-1.4998" (38.082-38.095 MM) *
Rods:
1.7488-1.7500" (44.42-44.45 MM)
Main:
Main:
Comments:
GAS, MAGNUM SERIES, L-HEAD TWIN, 20 HP, MV20 NEW SLEEVE BEARING ID (INSTALLED)
1.7439-1.7461". * .010 UNDERSIZE ROD AVLBL
KOHLER
0.8
48
K482
Stroke: 2.875" (73.025 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.7716-1.7721" (44.999-45.011 MM)
Main:
Main:
Comments:
L-HEAD TWIN, CAST IRON BLOCK, 18 HORSEPOWER
KOHLER
0.8
53
Stroke: 3.063" (77.800 MM)

1.4993-1.4998" (38.082-38.095 MM)
Rods:
1.7412-1.7422" (44.226-44.252 MM)
Main:
Main:
Comments:
L-HEAD TWIN, ALUMINUM BLOCK, 21 HP
KOHLER
0.9
KT21
54
1.0
K532
58
1.1
K532
3.3745-3.3755" (85.712-85.738 MM)
K582
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.7716-1.7721" (44.999-45.011 MM)
Main:
Main:
Comments:
KOHLER
KT21
3.3115-3.3125" (84.112-84.138 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.7716-1.7721" (44.999-45.011 MM)
Main:
Main:
Comments:
KOHLER
K482
3.251" (82.575 MM)
67
K582
3.500" (88.9 MM)
K662
K662
3.6245-3.6255" (92.062-92.088 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.8745-1.8750" (47.612-47.625 MM)
Rods:
2.2510-2.2515" (57.175-57.188 MM) ROLLER BEARIN
Main:
Main:
Comments:
L-HEAD TWIN, CAST IRON BLOCK, 24 HORSEPOWER 2.112" BUSHINGS ONE PER SIDE, 2.000" BUSHING
ONE SIDE ONLY OIL TRANSFER SLOT
KOHLER
KOHLER
4 Cylinders
1.0
59
L600
Stroke: 2.750" (69.85 MM)

Cyl Bore:
1.3400-1.3410" (34.036-34.061 MM)
Rods:
1.9980-1.9990" (50.749-50.775 MM)
Main:
Main:
GAS, INDUSTRIAL GENERATOR, LIQUID COOLED, 4 STROKE
Comments:
KOHLER
1.1
65
L600
2.625" (66.675 MM)
L654
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.3400-1.3410" (34.036-34.061 MM)
Rods:
1.9980-1.9990" (50.749-50.775 MM)
Main:
Main:
Comments:
GAS, INDUSTRIAL GENERATOR, LIQUID COOLED, 4 STROKE
303
L654
2.6245-2.6255" (66.662-66.688 MM)

Make
Liter
CID
Vin
Model
Year
KOMATSU
KOMATSU
4 Cylinders
0.0
2.9528" (75.001 MM)

Rods:
3.5433" (90. MM)
Main:
Main:
4D115-4 DIESEL * THRUST BRG WIDTH 1.9685
Comments:
KOMATSU
2.6
179
3.3
199
3.3
199
3.3
3.3
4.0
199
KOMATSU
4.0
KOMATSU
4.0
Stroke: 4.921" (124.993 MM)

2.5957-2.5965" (65.931-65.951 MM)
Rods:
3.3437-3.3445" (84.93-84.95 MM)
Main:
Main:
6134-31-1110
Casting Numbers:
Comments:
4D105.5, DIESEL
4D95S-W-1
3.7402-3.7410" (95.001-95.021 MM)
Thrust Width:
@ #5
95
4D95S-W-1
Cyl Bore:
3.7402-3.7410" (95.001-95.021 MM)
Thrust Width:
1.264 @ #5
199
95L
4D95L
Cyl Bore:
3.7402-3.7410" (95.001-95.021 MM)
Thrust Width:
1.264 @ #5
242
105
242
4D105 & S4D10

4.1340" (105.004 MM)
Cyl Bore:
Stroke: 4.527" (114.986 MM)

2.5957-2.5965" (65.931-65.951 MM)
Rods:
3.3437-3.3445" (84.93-84.95 MM)
Main:
Main:
Comments:
4D105.2 DIESEL
@ #5
4D95S-W-1
Cyl Bore:
Stroke: 4.527" (114.986 MM)

2.5957-2.5965" (65.931-65.951 MM)
Rods:
3.2256-3.2264" (81.93-81.951 MM)
Main:
Main:
Comments:
4D105 & S4D105
4D95S-1
3.7402-3.7410" (95.001-95.021 MM)
Thrust Width:
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206-6
Casting Numbers:
Comments:
DIESEL, 4D95L
KOMATSU
@ #3
4D95S-1
Cyl Bore:
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206-6
Casting Numbers:
Comments:
DIESEL, 4D95S-W-1
KOMATSU
4D94
3.7008" (94. MM)
Thrust Width:
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206-2
Casting Numbers:
Comments:
DIESEL 4D95S-W-1
KOMATSU
@ #3
94
Cyl Bore:
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206-6
Casting Numbers:
Comments:
DIESEL
KOMATSU
4D92
3.6220" (91.999 MM)
Thrust Width:
2.9
4D115-4
4.5276" (115.001 MM)

.197-.217" (5.004-5.512 MM)
.197-.217
@ #3
92
Cyl Bore:
Stroke: 4.1732" (105.999 MM)

-2.3622" (60. MM)
Rods:
-2.7559" (70. MM)
Main:
Main:
Comments:
4D94 DIESEL
KOMATSU
4D115-4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
159
Stroke: 3.8583" (98.001 MM)

-2.3622" (60. MM)
Rods:
-2.7559" (70. MM)
Main:
Main:
Comments:
4D92 DIESEL
KOMATSU
Engine Model
105.2
242
4D105.2
4.1338-4.1352" (104.999-105.034 MM)
Cyl Bore:
105.5
Cyl Bore:
304
4D105.5
4.134" (105.004 MM)

Make
Liter
CID
Vin
Model
Year
KOMATSU
KOMATSU
4 Cylinders
7.2
442
4D120-10
Stroke: 6.299" (159.995 MM)

Cyl Bore:
2.9516-2.9528" (74.971-75.001 MM)
Rods:
Rod Fillet:
3.7394-3.7402" (94.981-95.001 MM)
Main:
Main Fillet:
Main:
Thrust Width:
6110-31-1110, 6110-31-1112, 6110-33-1110, 6110-33-1112
Casting Numbers:
Comments:
(cont.)
4D120-10
4.7244" (120. MM)

.197-.217" (5.004-5.512 MM)
.197-.217" (5.004-5.512 MM)
@ #3
4D120-10 DIESEL THRUST BRG WIDTH 2.5591
KOMATSU
7.2
442
4D120-11
Stroke: 6.299" (159.995 MM)

Cyl Bore:
2.9516-2.9528" (74.971-75.001 MM)
Rods:
Rod Fillet:
3.7394-3.7402" (94.981-95.001 MM)
Main:
Main Fillet:
Main:
Thrust Width:
6110-31-1110, 6110-31-1112, 6110-33-1110, 6110-33-1112
Casting Numbers:
Comments:
4D120-11 & S4D120-11 DIESEL THRUST BRG WIDTH 2.6772
KOMATSU
7.2
442
KOMATSU
8.5
518
12.8
4D130 DIESEL
5.1181-5.1196" (130.-130.038 MM)
Cyl Bore:
@ #5
Thrust Width:
783
4D155-3
Stroke: 6.693" (170.002 MM)

3.8583" (98.001 MM)
Rods:
4.1732" (105.999 MM)
Main:
Main:
Comments:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4D155-3
6.1024" (155.001 MM)

.197-.217" (5.004-5.512 MM)
.197-.217" (5.004-5.512 MM)
@ #3
KOMATSU
KOMATSU
4D120-8
4.724" (119.99 MM)

.197-.217" (5.004-5.512 MM)
.197-.217" (5.004-5.512 MM)
@ #3
130
Stroke: 6.299" (159.995 MM)

2.9505-2.9515" (74.943-74.968 MM)
Rods:
3.7370-3.7380" (94.92-94.945 MM)
Main:
Main:
5.9980-6.000" (152.349-152.4 MM)
Rear Seal Diameter:
6115-31-1100, 6115-31-1110
Casting Numbers:
Comments:
4D130 DIESEL, D53A
KOMATSU
4D120-11
4.7244" (120. MM)

.133-.152" (3.378-3.861 MM)
.133-.152" (3.378-3.861 MM)
@ #3
4D120-8
Stroke: 6.299" (159.995 MM)

Cyl Bore:
2.9516-2.9528" (74.971-75.001 MM)
Rods:
Rod Fillet:
3.7394-3.7402" (94.981-95.001 MM)
Main:
Main Fillet:
Main:
Thrust Width:
6110-31-1110, 6110-31-1112, 6110-33-1110, 6110-33-1112
Casting Numbers:
Comments:
6 Cylinders
4.9
299
6D95
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206
Casting Numbers:
Comments:
Engine Model
6D95
3.7402-3.7410" (95.001-95.021 MM)
Cyl Bore:
@ #5
Thrust Width:
DIESEL, D37E-2 DOZER
KOMATSU
4.9
299
6D95L-1
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206, 6206-6
Casting Numbers:
Comments:
DIESEL, S6D95L-1, SA6D95L-1
KOMATSU
4.9
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206
Casting Numbers:
Comments:
6D95 DIESEL, D37E-2 DOZER
Thrust Width:
299
6D95L-1
3.7402-3.7410" (95.001-95.021 MM)
Cyl Bore:
@ #5
95
6D95
Cyl Bore:
3.7402-3.7410" (95.001-95.021 MM)
Thrust Width:
1.264 @ #7
305

Make
Liter
CID
Vin
Model
Year
KOMATSU
KOMATSU
6 Cylinders
4.9
299
Stroke: 4.5276" (115.001 MM)

2.2441-2.2447" (57.-57.015 MM)
Rods:
2.7559-2.7565" (70.-70.015 MM)
Main:
Main:
6206, 6206-6
Casting Numbers:
Comments:
95
Engine Model
(cont.)
6D95L-1
Cyl Bore:
3.7402-3.7410" (95.001-95.021 MM)
Thrust Width:
1.264 @ #7
DIESEL, 6D95L-1
KOMATSU
6.5
396
Stroke: 4.921" (124.993 MM)

2.5957-2.5965" (65.931-65.951 MM)
Rods:
3.3426-3.3445" (84.902-84.95 MM)
Main:
Main:
6136-31-1110, 6138-31-1110
Casting Numbers:
Comments:
6D105 & S6D105 DIESEL, BELOW SERIAL #50000
KOMATSU
6.5
396
7.1
KOMATSU
7.1
KOMATSU
7.1
KOMATSU
11.1
KOMATSU
11.1
KOMATSU
11.1
Stroke: 5.905" (149.987 MM)

3.1468-3.1472" (79.929-79.939 MM)
Rods:
4.3279-4.3287" (109.929-109.949 MM)
Main:
Main:
6151-31-1110, 615-31-1110
Casting Numbers:
Comments:
S6D125 DIESEL
6D110
@ #7
Thrust Width:
110
83-00
6D110
4.3307-4.3321" (110.-110.035 MM)
Cyl Bore:
6D108
674
6D108
4.2520-4.2530" (108.000-108.032 MM)
125
6D125
Cyl Bore:
4.9212-4.9228" (124.998-125.039 MM)
Thrust Width:
1.813
674
Stroke: 5.905" (149.987 MM)

3.1468-3.1476" (79.929-79.949 MM)
Rods:
4.3279-4.3287" (109.929-109.949 MM)
Main:
Main:
6151-31-1110, 615-31-1110
Casting Numbers:
Comments:
S6D125
83-00
4.330" (109.982 MM)
Cyl Bore:
Stroke: 5.905" (149.987 MM)

3.1468-3.1476" (79.929-79.949 MM)
Rods:
4.3279-4.3287" (109.929-109.949 MM)
Main:
Main:
6151-31-1110, 6151-41-1112
Casting Numbers:
Comments:
6D125
@ #7
110
Cyl Bore:
436
Stroke: 5.1181" (130.000 MM)

2.7533-2.7539" (69.935-69.950 MM)
Rods:
3.7376-3.7382" (94.935-94.950 MM)
Main:
Main:
Comments:
6D108 DIESEL
6D105, S6D105
4.1338-4,1352" (104.999-1050340.8 MM)
Thrust Width:
435
435
@ #7
105
Cyl Bore:
Stroke: 4.921" (124.993 MM)

2.5957-2.5964" (65.931-65.949 MM)
Rods:
3.3437-3.3445" (84.93-84.95 MM)
Main:
Main:
Comments:
6D110 DIESEL, WA380 BEFORE SERIAL #50, 000
Stroke: 4.921" (124.993 MM)

2.5957-2.5964" (65.931-65.949 MM)
Rods:
#1 3.3437-3.3445" (84.93-84.95 MM)
Main:
Main:
Comments:
6D110 DIESEL, WA380, SERIAL #50, 000 & UP
6D105, S6D105
4.1148-4.1352" (104.516-105.034 MM)
Thrust Width:
Stroke: 4.921" (124.993 MM)

2.5957-2.5965" (65.931-65.951 MM)
Rods:
3.3426-3.3445" (84.902-84.95 MM)
Main:
Main:
6136-31-1110, 6138-31-1110
Casting Numbers:
Comments:
6D105 & S6D105 DIESEL, SERIAL #50000 & UP
KOMATSU
105
Cyl Bore:
8361
674
S6D125
4.9213-4.9228" (125.001-125.039 MM)
Cyl Bore:
S6D125
S6D125
Cyl Bore:
4.9213-4.9228" (125.001-125.039 MM)
Thrust Width:
1.8130
306

Make
Liter
CID
Vin
Model
Year
KOMATSU
KOMATSU
6 Cylinders
12.2
743
Stroke: 6.0000" (152.4 MM)

-3.1252" (79.38 MM)
Rods:
-4.5000" (114.3 MM)
Main:
Main:
6D130 DIESEL
Comments:
KOMATSU
Engine Model
6D130
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
15.2
(cont.)
929
6D130
5.1260" (130.2 MM)
.156" (3.962 MM)
.156" (3.962 MM)
@ #4
140
6D140, S6D140-
5.5126-5.5134" (140.02-140.04 MM)

Stroke: 6.490" (164.846 MM)
Cyl Bore:
3.5406-3.5413" (89.931-89.949 MM)
Rods:
4.7217-4.7224" (119.931-119.949 MM)
Main:
2.052" (52.121 MM)
Main:
Thrust Width:
Comments:
6D140, S6D140-1 OE MANUAL HAS INCORRECT MAIN DIAMETER. THEY SAY HIGH SIDE IS 4.7246"
KOMATSU
19.3
1,175
Stroke: 6.693" (170.002 MM)

4.0125-4.0138" (101.918-101.951 MM)
Rods:
4.9189-4.9193" (124.94-124.95 MM)
Main:
Main:
6127-31-1111, 6127-31-1113, 6127-31-1114
Casting Numbers:
Comments:
6D155-4 DIESEL
KOMATSU
Stroke:
Rods:
Main:
Main:
19.3
1,175
6.693" (170.002 MM)

3.8583" (98.001 MM)
4.1732" (105.999 MM)
KOMATSU
19.3
23.2
6D155-4
6.1024" (155.001 MM)
.1969" (5.001 MM)
.1969 (5.001 MM)
@ #4
6D155-1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1,175
Stroke: 6.693" (170.002 MM)

3.8583" (98.001 MM)
Rods:
4.1732" (105.999 MM)
Main:
Main:
Comments:
KOMATSU
155
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
6D155-2
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1,413
6D170
6.6929-6.6948" (170.-170.048 MM)
2.519" (64.000 MM) @ #6
KUBOTA
1 Cylinder
0.1
Stroke: 1.570" (39.878 MM)

.7076-.7080" (17.973-17.983 MM)
Rods:
GAS, GENERATOR, 1.2 HP
Comments:
KUBOTA
0.1
0.1
0.2
KUBOTA
0.3
Stroke: 2.440" (61.976 MM)

1.0617-1.0623" (26.967-26.982 MM)
Rods:
Comments:
GS90
GS90
2.050" (52.07 MM)
GS130
Cyl Bore:
11
Stroke: 2.050" (52.07 MM)

1.0026-1.0032" (25.466-25.481 MM)
Rods:
Comments:
GN550
1.650" (41.91 MM)
Cyl Bore:
Stroke: 1.810" (45.974 MM)

.9436-.9442" (23.967-23.983 MM)
Rods:
Comments:
KUBOTA
GN550
Cyl Bore:
Stroke: 1.570" (39.878 MM)

.7664-.7669" (19.467-19.479 MM)
Rods:
Comments:
KUBOTA
6D155-2
6.1024" (155.001 MM)

.197-.217" (5.004-5.512 MM)
.197-.217" (5.004-5.512 MM)
@ #5
170
Stroke: 6.693" (170.002 MM)

Cyl Bore:
4.2512-4.2520" (107.98-108.001 MM)
Rods:
5.5108-5.5118" (139.974-140. MM)
Main:
Main:
Thrust Width:
6.6930" (170.002 MM)
Rear Seal Diameter:
Comments:
6D170 DIESEL THRUST WASHER THICKNESS = .138-.155"
KUBOTA
6D155-1
6.1024" (155.001 MM)

.197-.217" (5.004-5.512 MM)
.197-.217" (5.004-5.512 MM)
@ #5
GS130
2.360" (59.944 MM)
GN1850
Cyl Bore:
15
GN2500
Cyl Bore:
307
GN1850
2.640" (67.056 MM)
2.830" (71.882 MM)
GN2500

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
1 Cylinder
0.3
17
Stroke: 2.600" (66.04 MM)

1.1798-1.1804" (29.967-29.982 MM)
Rods:
GAS, GENERATOR, 7 HP
Comments:
KUBOTA
0.4
24
0.5
KUBOTA
0.5
KUBOTA
0.6
EA450-N
EA500-N
KUBOTA
EA600-N
0.4
24
0.4
0.4
24
0.4
KUBOTA
0.5
KUBOTA
0.5
Z400-B
2.5197-2.5204" (64.000-64.018 MM)
Z430-B
Z430-B
2.600" (66.04 MM)
Cyl Bore:
Z442-B
29
Z442-B
2.520" (64.008 MM)
Cyl Bore:
Stroke: 2.677" (67.996 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
1.5722-1.5728" (39.934-39.949 MM)
Main:
Main:
Comments:
4 CYCLE DIESEL, LIQUID COOLED
Stroke: 2.750" (69.85 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
DIESEL, MODEL B5100D & B5100E
Z400-B
27
Stroke: 2.677" (67.996 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
1.5722-1.5728" (39.934-39.949 MM)
Main:
Main:
Comments:
Z400
2.5197-2.5204" (64.000-64.018 MM)
Cyl Bore:
26
Stroke: 2.449" (62.205 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
FRONT 1.5722-1.5728" (39.934-39.949 MM)
Main 1:
REAR 1.7297-1.7303" (43.934-43.95 MM)
Main:
Main 2:
Comments:
4 CYCLE DIESEL, VERTICAL, WATER COOLED
KUBOTA
Z400
Cyl Bore:
Stroke: 2.449" (62.205 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
FRONT 1.5722-1.5728" (39.934-39.949 MM)
Main 1:
REAR 1.7297-1.7303" (43.934-43.95 MM)
Main:
Main 2:
Comments:
KUBOTA
EA600-N
3.6220-3.6229" (91.999-92.022 MM)
Cyl Bore:
2 Cylinders
2.450" (62.23 MM)

1.3370-1.3376" (33.96-33.975 MM)
1 & 2 1.5722-1.5728" (39.934-39.949 MM)
3 1.7297-1.7303" (43.934-43.95 MM)
KUBOTA
EA500-N
3.386" (86.004 MM)
KUBOTA
Stroke:
Rods:
Main 1:
Main 2:
EA450-N
3.307" (83.998 MM)
Cyl Bore:
36
Stroke: 3.543" (89.992 MM)

1.8881-1.8888" (47.958-47.976 MM)
Rods:
1.8881-1.8888" (47.958-47.976 MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, LIQUID-COOLED, EA600-NB
EA400-N
3.071" (78.003 MM)
Cyl Bore:
32
Stroke: 3.543" (89.992 MM)

1.8881-1.8888" (47.958-47.976 MM)
Rods:
1.8881-1.8888" (47.958-47.976 MM)
Main:
Main:
Comments:
GS280
EA400-N
Cyl Bore:
28
Stroke: 3.307" (83.998 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
1.8881-1.8888" (47.958-47.976 MM)
Main:
Main:
Comments:
(cont.)
2.870" (72.898 MM)
Cyl Bore:
Stroke: 3.307" (83.998 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
1.8881-1.8888" (47.958-47.976 MM)
Main:
Main:
Comments:
KUBOTA
GS280
Engine Model
Z482-B
Cyl Bore:
31
Z482-B
2.6378-2.6385" (67.000-67.018 MM)
Z500-1A
Cyl Bore:
308
2.625" (66.675 MM)
Z500-1A

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
2 Cylinders
0.5
31
Stroke: 2.756" (70.002 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
DIESEL, WATER COOLED, 4 STROKE
Comments:
KUBOTA
0.6
KUBOTA
0.6
KUBOTA
0.7
Z500-B
2.6772-2.6779" (68.000-68.018 MM)
B4200
35
Z600
2.8346" (72.000 MM)
Cyl Bore:
Stroke: 2.953" (75.000 MM)

1.5338" (38.959 MM)
Rods:
1.9659" (49.934 MM)
Main:
Main:
Comments:
DIESEL, B6000 TRACTOR
(cont.)
Z500-B
Cyl Bore:
35
Stroke: 2.756" (70.000 MM)

1.4553" (36.965 MM)
Rods:
ALL 1.7297" (43.934 MM)
Main:
Main:
Comments:
DIESEL, B4200 TRACTOR
Engine Model
B6000
45
ZL600
2.7559" (70.000 MM)
Cyl Bore:
L175
Z750-A
2.992" (75.997 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.7284-1.7290" (43.901-43.917 MM)
Rods:
2.0469-2.0476" (51.991-52.009 MM)
Main:
Main:
Comments:
DIESEL, L175 TRACTOR THRUST WASHER THKNS .0775-.0787 - AVALBL IN STD SIZE ONLY
KUBOTA
0.7
45
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL, Z751-B, L185 TRACTOR
KUBOTA
0.9
1.1
53
1.3
@ REAR
Z851-B
Z851-B
3.230" (82.042 MM)
Cyl Bore:
@ REAR
Thrust Width:
65
L210
Stroke: 3.465" (88.011 MM)

Cyl Bore:
2.1240-2.1248" (53.95-53.97 MM)
Rods:
3.1504-3.1511" (80.02-80.038 MM) *
Main 1:
2.3626-2.3631" (60.01-60.023 MM) *
Main:
Main 2:
Comments:
DIESEL, L210 TRACTOR *MAIN JOURNAL DIAM @ FLYWHEEL END
TIMING GEAR END
KUBOTA
Z751A, Z751-B
2.992" (75.997 MM)
Thrust Width:
Stroke: 3.230" (82.042 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL
KUBOTA
L185
Cyl Bore:
78
Z1100A
3.4645-3.4650" (87.998-88.011 MM)
**MAIN JOURNAL DIAM @
L260
Z1300
3.5384-3.5392" (89.875-89.896 MM)

Stroke: 3.937" (100. MM)
Cyl Bore:
2.3135-2.3150" (58.763-58.801 MM)
Rods:
2.4789-2.4802" (62.964-62.997 MM)
Main:
Main:
Comments:
DIESEL, MODEL L260 STD THRUST WASHR .097-.098, .010 & .020 O.S. AVLBL
KUBOTA
KUBOTA
3 Cylinders
0.6
37
D600-B
D600-B
2.5197-2.5204" (64.-64.018 MM)

Stroke: 2.449" (62.205 MM)
Cyl Bore:
1.3370-1.3376*" (33.96-33.975 MM)
Rods:
FRONT 1.5722-1.5728*" (39.934-39.949 MM)
Main 1:
REAR 1.7297-1.7303*" (43.934-43.95 MM)
Main 2:
4 CYCLE DIESEL, VERTICAL, WATER COOLED * UNDERSIZE BEARINGS AVAILABLE IN .008 & .016"
Comments:
KUBOTA
0.6
39
Stroke: 2.449" (62.205 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
FRONT 1.5722-1.5728" (39.934-39.949 MM)
Main 1:
REAR 1.7297-1.7303" (43.934-43.95 MM)
Main:
Main 2:
Comments:
D640-B
Cyl Bore:
309
2.5984-2.5992" (65.999-66.02 MM)
D640-B

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
3 Cylinders
0.7
40
Stroke: 2.677" (67.996 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
1.5722-1.5728" (39.934-39.949 MM)
Main:
Main:
Comments:
KUBOTA
0.7
KUBOTA
0.7
B6100D & B6100E
44
KUBOTA
0.8
KUBOTA
0.8
KUBOTA
0.9
KUBOTA
0.9
B7100D
D750-A, D750-B
2.6772-2.6779" (68.000-68.019 MM)
Z750-B
Cyl Bore:
52
Z750-B
2.6772-2.6779" (68.001-68.019 MM)
D850-B
Cyl Bore:
55
2.898" (73.609 MM)

1.5732-1.5738" (39.959-39.975 MM)
1 & 2 1.8872-1.8878" (47.935-47.95 MM) OIL CLR .00
#2 MAIN OIL CLEARANCE .0013-.0037"
#3 MAIN OIL CLEARANCE .0013-.0039"
MAX OIL CLEARANCE ON ALL MAINS .0079" (2.006
D722-B
2.6476-2.6484" (67.249-67.269 MM)
Cyl Bore:
47
Stroke: 2.756" (70.002 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
DH850-B, 4 CYCLE DIESEL, WATER-COOLED
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 5:
D722-B
47
Stroke: 2.7820" (70.663 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
VERTICAL, DIESEL, 4 CYCLE, WATER-COOLED
D650-B
2.5197-2.5204" (64.-64.018 MM)
Cyl Bore:
Stroke: 2.756" (70.002 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
DIESEL, D750-A, D750-AH, MODEL B7100D
D662-B
2.5197-2.5204" (64.000-64.018 MM)
Stroke: 2.756" (70.002 MM)

Cyl Bore:
1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
DIESEL, D650-A, D650-AH, MODELS B6100D & B6100E
Stroke: 2.677" (67.996 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
1.5722-1.5728" (39.934-39.949 MM)
Main:
Main:
Comments:
(cont.)
D662-B
Cyl Bore:
41
Engine Model
D850-B, DH850-
2.8347-2.8354" (72.001-72.019 MM)
D905-B
Cyl Bore:
D905-B
2.8347-2.8354" (72.001-72.019 MM)
# 3 #3 MAIN 2.0441-2.0449" (51.920-51.940 MM)

Main 6:
Comments:
KUBOTA
0.9
57
Stroke: 2.756" (70.002 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
KUBOTA
1.0
61
Stroke: 2.898" (73.609 MM)

1.5732-1.5738" (39.959-39.975 MM)
Rods:
#1 1.8872-1.8878" (47.935-47.95 MM)
Main 1:
REAR 2.0441-2.0449" (51.921-51.940 MM)
Main:
Main 2:
Comments:
4 CYCLE DIESEL, VERTICAL, WATER-COOLED
KUBOTA
1.1
D950-B
Cyl Bore:
D1005-B
Cyl Bore:
68
1.1
68
D1005-B
2.9921-2.9929" (76.000-76.019 MM)
DH1101-B
Stroke: 3.230" (82.042 MM)

Cyl Bore:
1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, LIQUID COOLED, D1102-B, D1102-BC
KUBOTA
D950-B
2.9528-2.9535" (75.001-75.019 MM)
DH1101B,D110
2.990" (75.946 MM)
L225, L225DT, L24
2.992-2.993" (75.997-76.022 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.7284-1.7290" (43.901-43.917 MM)
Rods:
2.0469-2.0476" (51.991-52.009 MM)
Main:
Main:
Comments:
DIESEL, L225, L225DT& L245 TRACTORS THRUST WASHER: .0775-.0787 ONLY STD SIZE AVLBL
310
D1100A

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
3 Cylinders
1.1
68
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
A
Casting Numbers:
Comments:
L235, L245
Engine Model
(cont.)
D1102B,D1101A
2.9921-2.9929" (75.999-76.02 MM)
Cyl Bore:
@ REAR
Thrust Width:
DIESEL, D1101A, D1102A, L235 & L245 TRACTOR, 25 HP BEARINGS AVAILABLE IN .OO8 + .016"
UNDERSIZE
KUBOTA
1.1
69
D1105-B
Stroke: 3.087" (78.41 MM)

Cyl Bore:
1.5732-1.5738" (39.959-39.975 MM)
Rods:
#1-2 1.8872-1.8878" (47.935-47.95 MM)
Main 1:
#3 2.0441-2.0449" (51.921-51.940 MM)
Main:
Main 2:
Comments:
4 CYCLE DIESEL,VERTICAL,H2O-COOLED, D1105-TB
KUBOTA
1.3
79
Stroke: 3.230" (82.042 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, LIQUID COOLED, D1302-B
KUBOTA
1.3
D1105-B,D1105
3.0709-3.0716" (78.001-78.019 MM)
D1301-B
79
D1301-B,D1302-
3.2283-3.2292" (81.999-82.021 MM)
Cyl Bore:
D1302-DI
D1302-DI
3.2283-3.2292" (81.999-82.021 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.8488-1.8494" (46.96-46.975 MM) *
Rods:
2.0440-2.0450" (51.918-51.943 MM)
Main:
Main:
Comments:
DIESEL, DIRECT INJ, LIQUID COOLED, 4 STROKE * ENGINE D1302DI-A ROD JOURNAL DIAMETER=1.7306"
(43.957 MM)
KUBOTA
1.3
79
L275, L295, L305
Stroke: 3.228" (81.991 MM)

Cyl Bore:
1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL,D1301A,D1302A ENGINE,L275,L295,L305 TRACTOR
KUBOTA
1.4
85
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
BF
Casting Numbers:
Comments:
KUBOTA
1.4
KUBOTA
1.4
1.5
D1402-DI
KUBOTA
1.5
D1402-DI
Cyl Bore:
3.3465-3.3473" (85.001-85.021 MM)
Thrust Width:
@ REAR
85
D1403-B
89
Stroke: 3.228" (82.000 MM)

1.8487" (46.957 MM)
Rods:
2.0441" (51.920 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ, D1462DI-A, L2950 TRACTOR
Stroke: 3.636" (92.354 MM)

1.8488-1.8494" (46.960-46.975 MM)
Rods:
2.0441-2.0449" (51.920-51.940 MM)
Main:
Main:
Comments:
DIESEL, L2900-L3300
@ REAR
Thrust Width:
85
D1402-B
3.3465-3.3473" (85.000-85.022 MM)
Stroke: 3.638" (92.405 MM)

Cyl Bore:
1.8488-1.8494" (46.96-46.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL 3 SERIES,H20 COOL, ALSO USED IN TORO MOWERS
KUBOTA
@ REAR
D1402-B
Cyl Bore:
Stroke: 3.228" (81.991 MM)

1.8488-1.8494" (46.96-46.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
BF
Casting Numbers:
Comments:
4 CYCLE DIESEL, DIR INJ, WATER COOLED
D1302-B,D1301
3.2283-3.2292" (81.999-82.022 MM)
L2950
Cyl Bore:
92
D1462DI
3.425" (87.000 MM)
L2900, L3300
Cyl Bore:
311
D1403-B
3.1496-3.1504" (80.000-80.019 MM)
D1503
3.2677-6.2686" (83.000-83.022 MM)

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
3 Cylinders
1.6
101
D1703-B
Stroke: 3.638" (92.405 MM)

Cyl Bore:
1.8487-1.8494" (46.95-46.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
DIESEL,3 SERIES,H2O COOL, ALSO USED IN TORO MOWERS
Comments:
KUBOTA
3.0
182
Stroke: 4.528" (115.011 MM)

2.5188-2.5193" (63.978-63.99 MM)
Rods:
2.9912-2.9917" (75.976-75.989 MM)
Main:
Main:
Comments:
KUBOTA
3.2
KUBOTA
3.5
D3502-B
49
1.2
1.2
1.2
1.3
81
1.5
91
V1200-B
2.9528-2.9535" (75.000-75.019 MM)
V1305-B
Cyl Bore:
V1205-B,V1205
2.8347-2.8354" (72.001-72.019 MM)
V1200-B
Cyl Bore:
V1100-B
2.8347-2.8354" (72.001-72.019 MM)
V1205-B
Cyl Bore:
V800-B
2.520" (64.008 MM)
V1100-B
Cyl Bore:
75
Stroke: 2.898" (73.609 MM)

1.5732-1.5738" (39.959-39.975 MM)
Rods:
#1-2 1.8872-1.8878" (47.935-47.95 MM)
Main 1:
#3 2.0462-2.0480" (51.974-52.019 MM)
Main:
Main 2:
Comments:
KUBOTA
Cyl Bore:
73
Stroke: 2.756" (70.002 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
KUBOTA
V800-B
70
Stroke: 2.898" (73.609 MM)

1.5732-1.5738" (39.959-39.975 MM)
Rods:
#1 1.8872-1.8878" (47.935-47.95 MM)
Main 1:
#2 1.8872-1.8878" (47.935-47.95 MM)
Main:
Main 2:
#3 2.0441-2.0449" (51.921-51.940 MM)
Main 3:
Comments:
V1205-TB, 4 CYCLE DIESEL, WATER COOLED
KUBOTA
D3502-B
4.2913-4.2920" (108.999-109.017 MM)
4 Cylinders
0.8
Stroke: 2.756" (70.002 MM)

1.4551-1.4557" (36.96-36.975 MM)
Rods:
1.7297-1.7303" (43.934-43.95 MM)
Main:
Main:
Comments:
VH1100-B, 4 CYCLE DIESEL, WATER COOLED
KUBOTA
D3200-B
4.2913-4.2920" (108.999-109.017 MM)
Cyl Bore:
Stroke: 2.449" (62.205 MM)

1.3370-1.3376" (33.96-33.975 MM)
Rods:
FRONT 1.5722-1.5728" (39.934-39.949 MM)
Main 1:
REAR 1.7297-1.7303" (43.934-43.95 MM)
Main 2:
Comments:
KUBOTA
D3000-B
D3200-B
KUBOTA
KUBOTA
D1703-B
4.1339-4.1346" (105.001-105.019 MM)
Cyl Bore:
213
Stroke: 4.920" (124.968 MM)

2.5188-2.5193" (63.978-63.99 MM)
Rods:
2.9912-2.9917" (75.976-75.989 MM)
Main:
Main:
Comments:
DIESEL
(cont.)
3.4252-3.4261" (87.000-87.022 MM)
D3000-B
Cyl Bore:
196
Stroke: 4.528" (115.011 MM)

2.5188-2.5193" (63.978-63.99 MM)
Rods:
2.9912-2.9917" (75.976-75.989 MM)
Main:
Main:
Comments:
Engine Model
V1305-B
2.9921-2.9929" (76.000-76.019 MM)
L285, L345
V1502B,V1501A
2.9921-2.9929" (76.000-76.019 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
@ REAR
Main:
Thrust Width:
Comments:
DIESEL,V1501A,V1501B,VT1502-B,L285 & L345 TRACTORS CHECK FOR AVAILABILITY BEFORE GRINDING
THE CRANKSHAFT, SUPPLIED IN ODD SIZES -.004", -.008" -.016" MEMBER # 2715 01-27-05 MC
312

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
4 Cylinders
1.5
91
V1505-B
Stroke: 3.087" (78.41 MM)

Cyl Bore:
1.5732-1.5738" (39.959-39.975 MM)
Rods:
1.8872-1.8878" (47.935-47.95 MM)
Main 1:
2.0441-2.0449" (51.921-51.940 MM)
Main 2:
4 CYCLE DIESEL,VERTICAL,H2O COOLED, V1505-TB
Comments:
KUBOTA
1.7
106
Engine Model
(cont.)
V1505-B,B1505
3.0709-3.0716" (78.001-78.019 MM)
L355
V1701B,V1702B
3.2283-3.2292*" (81.999-82.022 MM)

Stroke: 3.2280" (81.991 MM)
Cyl Bore:
1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL, V1701-B & 1702-B ENGINES, L355 TRACTOR *MAX BORE IS 3.2353
UNDERSIZE BEARING
AVAILABLE: .008 /.016
KUBOTA
1.7
106
L355
V1701-B,V1702
3.2283-3.2292" (81.999-82.022 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
@ REAR
Main:
Thrust Width:
Comments:
DIESEL, V1702-B, L355 TRACTOR UNDERSIZE BRGS AVLBL .008 & .016
KUBOTA
1.9
114
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Balance: Internal
A9, N7
Casting Numbers:
Comments:
CT4-114 IND DIESEL V1902B, CARRIER REF.
KUBOTA
1.9
114
CT4-114
L3250,L3350,L345
Stroke: 3.228" (82.000 MM)

Cyl Bore:
1.8487" (46.957 MM)
Rods:
2.0441" (51.920 MM)
Main:
Main:
Comments:
DIESEL,DIR INJ,V1902DI-AE, L3250,L3350,L3450,L3650
KUBOTA
1.9
114
Stroke: 3.230" (82.042 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
A9, N7
Casting Numbers:
Comments:
DIESEL, CT4-114, CARRIER REF.
KUBOTA
1.9
V1902-B
2.0
V1903-B
122
2.1
V2003-TB
126
KUBOTA
2.2
V1903-B
3.1496-3.1504" (80.000-80.019 MM)
Stroke: 3.638" (92.400 MM)

Cyl Bore:
1.8488-1.8494" (46.959-46.975 MM)
Rods:
2.0441-2.0449" (51.921-51.940 MM)
Main:
Main:
Comments:
DIESEL, TURBO, WATER-COOLED, TORO LAWNMOWER
KUBOTA
@ REAR
Thrust Width:
Stroke: 3.268" (83.000 MM)

1.7701-1.7706" (44.961-44.974 MM)
Rods:
2.4780-2.4785" (62.942-62.955 MM)
Main:
Main:
FU4
Casting Numbers:
Comments:
GAS OR LPG, NISSAN K21 ENGINE
CT4-114
3.3465-3.3473" (85.000-85.022 MM)
Cyl Bore:
114
V1902DI
3.346" (85.000 MM)
Stroke: 3.638" (92.405 MM)

Cyl Bore:
1.8488-1.8494" (46.96-46.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL 3 SERIES, H20-COOL, ALSO USED IN TORO MOWER
KUBOTA
V1902, V1902B
3.3465-3.3473" (85.001-85.021 MM)
Cyl Bore:
V2003-TB
3.2677-3.2686" (83.000-83.022 MM)
K21
Cyl Bore:
134
K21
3.5039-3.5059" (89.000-89.050 MM)
V2203-DI-B
Stroke: 3.638" (92.405 MM)

Cyl Bore:
1.8487-1.8494" (46.957-46.975 MM)
Rods:
2.0441-2.0448" (51.92-51.938 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, 3 SERIES, BOBCAT & V2203-B TORO MOWER
313
V2203-B
3.4247-3.4253" (86.987-87.002 MM)
1.023" (25.984 MM)

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
4 Cylinders
3.3
202
V3300
Stroke: 4.330" (110.000 MM)

2.0857" (52.977 MM)
Rods:
2.9912" (75.976 MM)
Main:
Main:
DIESEL, M6800 TRACTOR, ENGINE MODEL V3300-E
Comments:
KUBOTA
4.0
KUBOTA
4.3
KUBOTA
4.3
KUBOTA
4.3
4.7
KUBOTA
4.7
M8950
V4300-B
M7580
V4302
4.134" (105.000 MM)
M9580
284
V4702 TURBO
4.291" (109.000 MM)
Cyl Bore:
V4702-B
5 Cylinders
2.3
142
Stroke: 3.228" (81.991 MM)

1.8488-1.8494" (46.96-46.975 MM)
Rods:
2.0440-2.0450" (51.918-51.943 MM)
Main:
Main:
DIESEL, DIR INJ, 4 STROKE, LIQUID COOLED
Comments:
KUBOTA
2.4
2.5
F2302-DI-B
M4030SU
F2503-TB
Stroke: 3.638" (92.400 MM)

Cyl Bore:
1.8488-1.8494" (46.959-46.975 MM)
Rods:
2.0441-2.0449" (51.921-51.940 MM)
Main:
Main:
Comments:
DIESEL, TURBO, WATER-COOLED, TORO LAWNMOWER
KUBOTA
2.8
168
314
F2503-TB
3.2677-3.2686" (83.000-83.022 MM)
L4150
Stroke: 3.638" (92.405 MM)

Cyl Bore:
1.8488-1.8494" (46.96-46.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
E-4
Casting Numbers:
Comments:
DIESEL, 3 SERIES, WATER COOLED L4150, TORO MOWER
F2402-DI
3.425" (87.000 MM)
Cyl Bore:
153
F2302-DI-B
3.346" (84.988 MM)
Cyl Bore:
148
Stroke: 3.228" (82.000 MM)

1.8487" (46.957 MM)
Rods:
2.0441" (51.920 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ, M4030SU TRACTOR
KUBOTA
V4702-B
4.2913-4.2920" (108.999-109.017 MM)
Cyl Bore:
KUBOTA
KUBOTA
V4300-B
4.2913-4.2920" (108.999-109.017 MM)
Cyl Bore:
284
Stroke: 4.920" (124.968 MM)

2.5188-2.5193" (63.978-63.99 MM)
Rods:
2.9912-2.9917" (75.976-75.989 MM)
Main:
Main:
Comments:
DIESEL
V4300 TURBO
4.291" (109.000 MM)
Cyl Bore:
Cyl Bore:
Stroke: 4.921" (125.000 MM)

2.5188" (63.978 MM)
Rods:
2.9912" (75.976 MM)
Main:
Main:
Comments:
TURBO DIESEL, 100 HP, M9580 TRACTOR
V4000-B
4.1339-4.1346" (105.001-105.019 MM)
264
Stroke: 4.921" (125.000 MM)

2.5188" (63.978 MM)
Rods:
2.9912" (75.976 MM)
Main:
Main:
Comments:
DIESEL, 77 HP, M7580 TRACTOR
KUBOTA
V4000-B
262
Stroke: 4.528" (115.011 MM)

2.5188-2.5193" (63.978-63.99 MM)
Rods:
2.9912-2.9917" (75.976-75.989 MM)
Main:
Main:
Comments:
V3300-E
3.8582" (98.000 MM)
Cyl Bore:
262
Stroke: 4.528" (115.000 MM)

2.5188" (63.978 MM)
Rods:
2.9912" (75.976 MM)
Main:
Main:
Comments:
TURBO DIESEL, 96 HP, M8950 TRACTOR
(cont.)
M6800
Cyl Bore:
243
Stroke: 4.528" (115.011 MM)

2.5188-2.5193" (63.978-63.99 MM)
Rods:
2.9912-2.9917" (75.976-75.989 MM)
Main:
Main:
Comments:
Engine Model
F2803-B
3.4252-3.4261" (87.-87.023 MM)

Make
Liter
CID
Vin
Model
Year
KUBOTA
KUBOTA
5 Cylinders
2.8
168
Stroke: 3.638" (92.400 MM)

1.8487" (46.957 MM)
Rods:
2.0441" (144.320 MM)
Main:
Main:
DIESEL, DIR INJ, L5450 TRACTOR
Comments:
L5450
F2803-DI
6 Cylinders
2.2
136
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
DIESEL THRUST BRG THCKNS .078-.079
Comments:
KUBOTA
2.6
2.6
2.8
KUBOTA
M4030
S2600-B
170
M5030
170
S2800-B
S2800-B
3.3465-3.3473" (85.000-85.022 MM)
4 Cylinders
2.3
140
2.9
3.3
3.7
3.500" (88.9 MM)

.125" (3.175 MM)
.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
3.750" (95.25 MM)

.125" (3.175 MM)
Thrust Width:
1.626" (41.300 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.125" (3.175 MM)
.094" (2.388 MM)
1.626" (41.300 MM)
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
1.626" (41.300 MM)
201
Stroke: 4.000" (101.6 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
#1 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
#2 2.4770-2.4780" (62.916-62.941 MM)
Main:
Main 2:
5295, 52951, 52951X, 5295S4
Casting Numbers:
Stroke: 4.500" (114.3 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
#1 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
#2 2.4770-2.4780" (62.916-62.941 MM)
Main:
Main 2:
53522, 5354, 53542, 53544
Casting Numbers:
Cyl Bore:
Rod Fillet:
Main Fillet:
176
Stroke: 4.000" (101.6 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
#1 2.4355-2.4365" (61.862-61.887 MM)
Main 1:
#2 2.4770-2.4780" (62.916-62.941 MM)
Main:
Main 2:
5295, 52951, 52951X, 5295S4
Casting Numbers:
LEROI
S2802-DI-A
3.3464" (85.000 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.3120-2.3130" (58.725-58.75 MM)
Rods:
#1 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main: Numbers:
5373, E373
Casting
LEROI
@ REAR
Thrust Width:
LEROI
LEROI
S2600-B
3.2283-3.2292" (81.999-82.021 MM)
Cyl Bore:
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL
LEROI
S2602
3.229" (82.000 MM)
Cyl Bore:
2.8
@ REAR
Thrust Width:
158
Stroke: 3.228" (82.000 MM)

1.8487" (46.957 MM)
Rods:
ALL 2.0441" (51.920 MM)
Main:
Main:
Comments:
DIESEL
S2200-B
2.9921-2.9929" (76.000-76.019 MM)
Cyl Bore:
Stroke: 3.228" (81.991 MM)

1.7307-1.7313" (43.96-43.975 MM)
Rods:
2.0441-2.0449" (51.92-51.94 MM)
Main:
Main:
Comments:
DIESEL
KUBOTA
S2200-B
Cyl Bore:
158
Stroke: 3.229" (82.000 MM)

1.8487" (46.957 MM)
Rods:
2.0441" (51.920 MM)
Main:
Main:
Comments:
DIESEL, 48 HP, M4030 TRACTOR
KUBOTA
(cont.)
3.425" (87.000 MM)
Cyl Bore:
KUBOTA
KUBOTA
Engine Model
226
315

Make
Liter
CID
Vin
Model
LEROI
LEROI
13.8
844
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
LEROI
5.250" (133.35 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.661" (42.189 MM)
12 Cylinders
32.8
2000
Stroke: 7.000" (177.8 MM)

4.0650-4.0660" (103.251-103.276 MM)
Rods:
#1 3.9335-3.9345" (99.911-99.936 MM)
Main:
Main: Numbers:
5245, 52451, 524513
Casting
Cyl Bore:
Rod Fillet:
Main Fillet:
6.750" (171.45 MM)

.109" (2.769 MM)
.109" (2.769 MM)
Stroke: 7.000" (177.8 MM)

Cyl Bore:
4.0650-4.0660" (103.251-103.276 MM)
Rods:
Rod Fillet:
#1 3.9335-3.9345" (99.911-99.936 MM)
Main:
Main Fillet:
Main: Numbers:
52041, 520427, 520433, 52045, 520451, B512
Casting
6.750" (171.45 MM)

.109" (2.769 MM)
.109" (2.769 MM)
LEROI
49.1
3,000
LEXUS
LEXUS
6 Cylinders
2.5
153
2VZFE
Stroke: 2.756" (70.002 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.5191-2.5197" (63.985-64. MM)
Main:
Main:
MFI, ES250
Comments:
LEXUS
3.0
3.0
183
3VZFE
183
3.0
4.5
ES300
183
2JZGE
GS300
274
1FZFE
3VZFE
1MZFE
92-02
2JZGE
LX450
96-97
3.940" (100.076 MM)
Thrust Width:
1.1930" (30.302 MM) @ # 4
1FZFE
8 Cylinders
4.0
244
1UZFE
Stroke: 3.250" (82.55 MM)

2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.6373-2.6378" (66.987-67. MM)
Main:
Main:
MFI, LS400, SC400
Comments:
LEXUS
94-01
Cyl Bore:
LEXUS
LEXUS
92-94
3.4449-3.4461" (87.5-87.531 MM)
.078" ROLLED (1.981 MM)
.078" ROLLED (1.981 MM)
1.025 @ #2
3.390" (86.106 MM)
Cyl Bore:
Stroke: 3.740" (94.996 MM)

2.2434-2.2441" (56.982-57. MM)
Rods:
2.7158-2.7165" (68.981-68.999 MM) *
Main:
Main:
3.8970" (98.984 MM)
Rear Seal Diameter:
Comments:
DOHC, LX450 * .010 UNDERSIZE CRANK AVLBL
2VZFE
3.441" (87.401 MM)
Cyl Bore:
Stroke: 3.390" (86.106 MM)

2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.4403-2.4410" (61.984-62.001 MM)
Main:
Main:
Comments:
MFI, GS300, SC300, IS300
LEXUS
ES300
1MZFE
90-91
3.445" (87.503 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.268" (83.007 MM)

2.0864-2.0866" (52.995-53. MM)
Rods:
2.4011-2.4016" (60.988-61.001 MM)
Main:
Main:
Comments:
SFI, ES300, RX300
LEXUS
ES250
Cyl Bore:
Stroke: 3.228" (81.991 MM)

2.1648-2.1654" (54.986-55.001 MM)
Rods:
2.5191-2.5197" (63.985-64. MM)
Main:
Main:
1.575" (40.005 MM)
3.662" (93.015 MM)
Rear Seal Diameter:
Comments:
MFI, ES300
LEXUS
Engine Model
8 Cylinders
Stroke: 4.875" (123.825 MM)

3.2480-3.2490" (82.499-82.525 MM)
Rods:
#1 3.7480-3.7490" (95.199-95.225 MM)
Main:
Main:
53931
Casting Numbers:
LEROI
Year
4.3
LS400
262
3UZFE
LS430
Cyl Bore:
2.0465-2.0472" (51.982-52.000 MM)

Rods:
2.6373-2.6378" (66.988-67.000 MM)
Main:
Main:
Comments:
LS 430 THRUST WASHER THICKNESS .0961-.0980" (2.440-2.490 MM)
316
90-98
1UZFE
3.4449-3.4461" (87.5-87.531 MM)
Cyl Bore:
02-06
3UZ-FE
3.5827-3.5838" (91.000-91.029 MM)

Make
Liter
CID
Vin
Model
Year
LEYLAND
LEYLAND
4 Cylinders
0.0
4-384
69-85
Stroke: 4.724" (119.99 MM)

2.6245-2.6250" (66.662-66.675 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
1.875 @ #5
Main:
Thrust Width:
344 & 384 TRACTORS, AGRI DIESEL .015, .030, .045" UNDERSIZE BEARINGS AVAILABLE
Comments:
WASHER THICKNESS, .093"
LEYLAND
1.6
98
4-98
Stroke: 4.921" (124.993 MM)

2.6245-2.6250" (66.662-66.675 MM)
Rods:
3.2495-3.2500" (82.537-82.55 MM)
Main:
Main:
7HA
Casting Numbers:
Comments:
DIESEL TRACTOR/ JCB 3D BACKHOE
LEYLAND
1.8
110
Stroke: 3.500" (88.9 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1265-2.1270" (54.013-54.026 MM)
Main:
Main:
Comments:
ADO17, AD074 DIESEL, 18V
LEYLAND
Engine Model
3.4
70-80
AD017, AD074
4-98
74-87
AD017, AD074
3.1598" (80.259 MM)
Cyl Bore:
@ CENTER
Thrust Width:
207
STD. THRUST
3.8583" (98.001 MM)
Cyl Bore:
344 & 384
4-272
4-272
2.6245-2.6250" (66.662-66.675 MM)

Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
361947, B1443, BK947
Casting Numbers:
Comments:
3.4L AGRI DIESEL UNDERSIZE BRGS AVLBL
LIEBHERR
LIEBHERR
4 Cylinders
5.6
342
D904 NA
Stroke: 5.315" (135.001 MM)

Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
Rods:
3.8569-3.8578" (97.965-97.988 MM)
Main:
Main Fillet:
Main:
Thrust Width:
DIESEL, FOUR STROKE, DIR INJ THRUST WASHER THKNS .1329-.1348"
Comments:
AVAILABLE
LIEBHERR
5.6
342
D904 NA
4.528" (115.011 MM)

.187-.207" (4.750-5.258 MM)
1.5748-1.5772" (39.9.38-40.062 MM)
& .025 AND .50 MM OVERSIZES
D904 TB
D904 TB, D904 T
4.528" (115.011 MM)

Stroke: 5.315" (135.001 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
Rods:
3.8569-3.8578" (97.965-97.988 MM)
.187-.207" (4.750-5.258 MM)
Main:
Main Fillet:
1.5748-1.5772" (39.9.38-40.062 MM)
Main:
Thrust Width:
Comments:
DIESEL, ALSO D904 T, FOUR STROKE, DIR INJ THRUST WASHER THKNS .1329-.1348 & .025 AND .50 MM
OVERSIZES AVAILABLE
LIEBHERR
6.1
373
D914 T
D914 T, D914 TI
4.724" (119.99 MM)

Stroke: 5.315" (135.001 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
Rods:
3.8569-3.8578" (97.965-97.988 MM)
.187-.207" (4.750-5.258 MM)
Main:
Main Fillet:
1.5748-1.5772" (39.9.38-40.062 MM)
Main:
Thrust Width:
Comments:
DIESEL, ALSO D914 TI, FOUR STROKE, DIR INJ THRUST WASHER THKNS .1329-.1348 & .025 AND .50 MM
OVERSIZES AVAILABLE
LIEBHERR
LIEBHERR
6 Cylinders
8.4
513
D906 NA
Stroke: 5.315" (135.001 MM)

Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
Rods:
3.8569-3.8578" (97.965-97.988 MM)
Main:
Main Fillet:
Main:
Thrust Width:
DIESEL, FOUR STROKE, DIR INJ THRUST WASHER THKNS .1329-.1348
Comments:
AVAILABLE
LIEBHERR
8.4
513
D906 NA
4.528" (115.011 MM)

.187-.207" (4.750-5.258 MM)
1.5748-1.5772" (39.9.38-40.062 MM)
& .025 AND .50 MM OVERSIZES
D906 TB
D906 TB, D906 T
4.528" (115.011 MM)

Stroke: 5.315" (135.001 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
Rods:
3.8569-3.8578" (97.965-97.988 MM)
.187-.207" (4.750-5.258 MM)
Main:
Main Fillet:
1.5748-1.5772" (39.9.38-40.062 MM)
Main:
Thrust Width:
Comments:
DIESEL, ALSO D906 T/TI, FOUR STROKE, DIR INJ THRUST WASHER THKNS .1329-.1348 & .025 AND .50
MM OVERSIZES AVAILABLE
317

Make
Liter
CID
Vin
Model
Year
LIEBHERR
LIEBHERR
6 Cylinders
9.2
559
D916 T
Engine Model
(cont.)
D916 T, D916 TI
4.724" (119.99 MM)

Stroke: 5.315" (135.001 MM)
Cyl Bore:
2.9516-2.9524" (74.971-74.991 MM)
Rods:
3.8569-3.8578" (97.965-97.988 MM)
.187-.207" (4.750-5.258 MM)
Main:
Main Fillet:
1.5748-1.5772" (39.9.38-40.062 MM)
Main:
Thrust Width:
DIESEL, ALSO D916 TI, FOUR STROKE, DIR INJ THRUST WASHER THKNS .1329-.1348" & .025 AND .50 MM
Comments:
OVERSIZES AVAILABLE
LISTER
LISTER
1 Cylinder
0.2
13
Stroke: 2.250" (57.15 MM)

1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.6245-1.6250" (41.262-41.275 MM)
Main:
Main:
DIESEL, 4 STROKE, VERTICAL, INDIRECT INJ
Comments:
LISTER
0.3
AA1
16
AB1
Stroke: 2.250" (57.15 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.6245-1.6250" (41.262-41.275 MM)
Main:
Main:
Comments:
DIESEL,AIR COOLED,INDIRECT INJ,& AB1W-WATER COOLED
LISTER
0.3
19
LISTER
0.4
AC1
25
LISTER
0.5
LISTER
0.6
LISTER
0.6
0.7
LISTER
0.8
0.8
ST1
ST1
3.750" (95.25 MM)
TS1
TS1
3.750" (95.25 MM)
Cyl Bore:
PH1
PH1
3.437" (87.3 MM)
Cyl Bore:
TR1
TR1
3.875" (98.425 MM)
Cyl Bore:
49
Stroke: 4.330" (109.982 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
1 2.3730-2.3735" (60.274-60.287 MM)
Main 1:
2 4.1205-4.1210" (104.661-104.673 MM)
Main:
Main 2:
Comments:
DIESEL, 4 STROKE, AIR COOLED, DIR INJ, PJ1Z
LV1
3.375" (85.725 MM)
Cyl Bore:
47
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
LV1
40
Stroke: 3.937" (100. MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
2.3730-2.3735" (60.274-60.287 MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, AIR COOLED, DIR INJ
LT1
3.250" (82.55 MM)
Cyl Bore:
39
Stroke: 3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
LT1
39
Stroke: 3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4988-2.5000" (63.47-63.5 MM)
Main:
Main:
Comments:
AC1,AC1Z,AC1
3.000" (76.2 MM)
Cyl Bore:
29
Stroke: 3.250" (82.55 MM)

2.1251-2.1256" (53.978-53.99 MM)
Rods:
2.1242-2.1247" (53.955-53.967 MM)
Main:
Main:
Comments:
AB1, AB1W
3.000" (76.2 MM)
Stroke: 2.625" (66.675 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.6245-1.6250" (41.262-41.275 MM)
Main:
Main:
Comments:
DIESL,AIR COOLD,IND INJ,AC1Z,AC1ZS,&AC1W-WATR COOL
Stroke: 3.000" (76.2 MM)

2.1251-2.1256" (53.978-53.99 MM)
Rods:
2.1242-2.1247" (53.955-53.967 MM)
Main:
Main:
Comments:
AA1
2.750" (69.85 MM)
Cyl Bore:
PJ1
Cyl Bore:
318
PJ1, PJ1Z
3.812" (96.825 MM)

Make
Liter
CID
Vin
Model
LISTER
LISTER
Engine Model
2 Cylinders
0.6
37
AC2
Stroke: 2.625" (66.675 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.6245-1.6250" (41.262-41.275 MM)
Main:
Main:
DIESEL,AIR COOLED,INDIRECT INJ,& AC2W WATER COOLED
Comments:
LISTER
Year
0.7
44
AC2, AC2W
3.000" (76.2 MM)
LPA2
LPA2
2.990" (75.946 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
1&2 2.1647-2.1654" (54.983-55.001 MM)
Main 1:
3 2.7553-2.7559" (69.985-70. MM)
Main:
Main 2:
Comments:
DIESEL, 4 STROKE, AIR COOLED, VERTICAL, DIRECT INJ THRUST BRG THKNS .091-.093
LISTER
0.9
57
LPW2
LPW2, LPWS2
2.990" (75.946 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
1&2 2.1647-2.1654" (54.983-55.001 MM)
Main 1:
3 2.7553-2.7559" (69.985-70. MM)
Main:
Main 2:
Comments:
DIESEL,4 STROKE,H2O COOLD,VERTICAL,INDIR INJ,LPWS2 THRUST BRG THKNS .091-.093
LISTER
1.0
58
Stroke: 3.250" (82.55 MM)

2.1251-2.1256" (53.978-53.99 MM)
Rods:
2.1242-2.1247" (53.955-53.967 MM)
Main:
Main:
Comments:
LISTER
1.3
77
Stroke: 3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4988-2.5000" (63.47-63.5 MM)
Main:
Main:
Comments:
LISTER
1.3
1.3
LISTER
1.5
1.5
LISTER
1.6
1.6
PH2
PH2
3.437" (87.3 MM)
TL2
TL2
3.875" (98.425 MM)
Cyl Bore:
TR2
TR2
3.875" (98.425 MM)
Cyl Bore:
TX2
TX2
3.937" (100. MM)
Cyl Bore:
99
Stroke: 4.330" (109.982 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
1 2.3730-2.3735" (60.274-60.287 MM)
Main 1:
2 4.1205-4.1210" (104.661-104.673 MM)
Main:
Main 2:
Comments:
DIESEL, 4 STROKE, AIR COOLED, DIR INJ, PJ2Z
TS2
3.750" (95.25 MM)
Cyl Bore:
98
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
TS2
94
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
ST2
3.750" (95.25 MM)
Cyl Bore:
94
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
ST2
80
Stroke: 3.937" (100. MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
2.3730-2.3735" (60.274-60.287 MM)
Main:
Main:
Comments:
LV2
3.375" (85.725 MM)
Cyl Bore:
77
Stroke: 3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4999-2.4995" ( 63.475-63.487 MM)
Main:
Main:
Comments:
LISTER
LV2
Cyl Bore:
PJ2
Cyl Bore:
319
PJ2, PJ2Z
3.812" (96.825 MM)

Make
Liter
CID
Vin
Model
LISTER
LISTER
2 Cylinders
2.1
128
Stroke: 4.500" (114.3 MM)

2.7488-2.7492" (69.82-69.83 MM)
Rods:
3.2496-3.2500" (82.54-82.55 MM)
Main:
Main:
Comments:
HR2
Engine Model
(cont.)
HR2
4.2530-4.2540" (108.026-108.052 MM)
Cyl Bore:
LISTER
LISTER
Year
3 Cylinders
1.1
66
LPA3
LPA3
2.990" (75.946 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
1&2 2.1647-2.1654" (54.983-55.001 MM)
Main 1:
3 2.7553-2.7559" (69.985-70. MM)
Main 2:
Comments:
LISTER
1.4
85
LPW3
LPW3, LPWS3
2.990" (75.946 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
1&2 2.1647-2.1654" (54.983-55.001 MM)
Main 1:
3 2.7553-2.7559" (69.985-70. MM)
Main:
Main 2:
Comments:
DIESEL,4 STROKE,H2O COOLD,VERTICAL,INDIR INJ,LPWS3 THRUST BRG THKNS .091-.093
LISTER
Stroke:
Rods:
Main:
Main:
1.9
116
3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
2.4988-2.5000" (63.47-63.5 MM)
LISTER
1.9
116
Stroke: 3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4988-2.5000" (63.47-63.5 MM)
Main:
2.508" (63.703 MM)
Main:
Rear Seal Diameter:
Comments:
DIESEL THRUST WASHER THKNS .091-.093"
LISTER
1.9
2.3
2.3
LISTER
2.4
2.4
LISTER
3.2
TL3
TR3
TR3
3.875" (98.425 MM)
TX3
TX3
3.937" (100. MM)
Cyl Bore:
PJ3
HR3
Cyl Bore:
320
PJ3
3.812" (96.825 MM)
Cyl Bore:
192
Stroke: 4.500" (114.3 MM)

2.7488-2.7492" (69.82-69.83 MM)
Rods:
3.2496-3.2500" (82.54-82.55 MM)
Main:
Main:
353-5000
Casting Numbers:
Comments:
TL3
3.875" (98.425 MM)
Cyl Bore:
148
Stroke: 4.330" (109.982 MM)

2.3745-2.3750" (60.312-60.325 MM)
Rods:
1 2.3730-2.3735" (60.274-60.287 MM)
Main 1:
2 4.1205-4.1210" (104.661-104.673 MM)
Main:
Main 2:
Comments:
TS3
3.750" (95.25 MM)
Cyl Bore:
147
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
TS3
142
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
ST3
3.750" (95.25 MM)
Cyl Bore:
142
Stroke: 4.000" (101.6 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
ST3
Cyl Bore:
116
Stroke: 3.500" (88.9 MM)

2.4995-2.5000" (63.487-63.5 MM)
Rods:
2.4946-2.4950" (63.363-63.373 MM)
Main:
Main:
Comments:
LISTER
3.750" (95.25 MM)
Cyl Bore:
HR3
4.2530-4.2540" (108.026-108.052 MM)

Make
Liter
CID
Vin
Model
Year
LISTER
LISTER
Engine Model
4 Cylinders
1.5
89
LPA4
LPA4
2.990" (75.946 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
1&2 2.1647-2.1654" (54.983-55.001 MM)
Main 1:
3 2.7553-2.7559" (69.985-70. MM)
Main 2:
Comments:
LISTER
1.9
114
LPW4
LPW4, LPWS4
2.990" (75.946 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
1&2 2.1647-2.1654" (54.983-55.001 MM)
Main 1:
3 2.7553-2.7559" (69.985-70. MM)
Main:
Main 2:
Comments:
DIL, 4 STK, H2O COLD,VERTICAL,INDIR INJ,LPWS4+LPU4 THRUST BRG THKNS .091-.093
LISTER
4.2
256
Stroke: 4.500" (114.3 MM)

2.7488-2.7492" (69.82-69.83 MM)
Rods:
3.2496-3.2500" (82.54-82.55 MM)
Main:
Main:
353-5000
Casting Numbers:
Comments:
HR4
HR4
4.2530-4.2540" (108.026-108.052 MM)
Cyl Bore:
LOMBARDINI
LOMBARDINI
1 Cylinder
0.3
16
6LD260
6LD260
2.755" (69.977 MM)

Stroke: 2.677" (67.996 MM)
Cyl Bore:
1.5744-1.5748" (39.99-40. MM)
Rods:
1.5744-1.5748" (39.99-40. MM)
Main:
Main:
DIESEL, 4-STROKE, AIR-COOLED,& MODELS 500,6LD260/C THRUST WASHER THKNS .090-.092
Comments:
LOMBARDINI
0.3
20
6LD325
6LD325
3.070" (77.978 MM)

Stroke: 2.677" (67.996 MM)
Cyl Bore:
1.5744-1.5748" (39.99-40. MM)
Rods:
1.5744-1.5748" (39.99-40. MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR-COOLED,& MODELS 520,6LD325/C THRUST WASHER THKNS .090-.092
LOMBARDINI
0.4
22
530
530
3.228" (81.991 MM)

Stroke: 2.677" (67.996 MM)
Cyl Bore:
1.5744-1.5748" (39.990-40.000 MM)
Rods:
CENTR 1.5744-1.5748" (39.990-40.000 MM)
Main 1:
FLYWH 1.5744-1.5748" (39.990-40.000 MM)
Main:
Main 2:
@ PTO 1.1000-1.1020" (27.940-27.991 MM)
Main 3:
Comments:
DIESEL, 4-STROKE, AIR-COOLED THRUST WASHER THKNS .0909-.0929
LOMBARDINI
0.4
22
6LD360
6LD360
3.228" (81.991 MM)

Stroke: 2.677" (67.996 MM)
Cyl Bore:
1.5744-1.5748" (39.99-40. MM)
Rods:
1.5744-1.5748" (39.99-40. MM)
Main:
Main:
Comments:
DIESEL, 6LD360/C & V, 4-STROKE, AIR-COOLED THRUST WASHER THKNS .090-.092
LOMBARDINI
0.4
24
6LD400
Stroke: 2.677" (67.996 MM)

Cyl Bore:
1.5744-1.5748" (39.99-40. MM)
Rods:
1.5744-1.5748" (39.99-40. MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, AIR-COOLED THRUST WASHER THKNS .090-.092
LOMBARDINI
0.5
28
3LD450
Stroke: 3.150" (80.01 MM)

Cyl Bore:
#1 1.6531-1.6535" (41.989-41.999 MM)
Main 1:
#2 1.5744-1.5748" (39.99-40. MM)
Main:
Main 2:
Comments:
DIESEL, 4-STROKE, AIR-COOLED, ALSO MODEL LDA450
LOMBARDINI
0.5
31
LOMBARDINI
0.6
36
3LD510, LDA51
3.350" (85.09 MM)
7LD600/I
3.543" (89.992 MM)

Stroke: 3.700" (93.98 MM)
Cyl Bore:
1.9681-1.9685" (49.99-50. MM)
Rods:
1.7712-1.7716" (44.988-44.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR COOLED, ALSO MODEL 710 .091-.093 THRUST WASHER THKNS
321
3LD450, LDA45
3.350" (85.09 MM)
3LD510
Stroke: 3.540" (89.916 MM)

Cyl Bore:
#1 1.6531-1.6535" (41.989-41.999 MM)
Main 1:
#2 1.5744-1.5748" (39.99-40. MM)
Main:
Main 2:
Comments:
DIESEL, 4-STROKE,AIR-COOL,MODEL LDA510,3LD510/L,L8
6LD400
3.385" (85.979 MM)
7LD600/I, 710

Make
Liter
CID
Vin
Model
Year
LOMBARDINI
LOMBARDINI
1 Cylinder
0.6
39
4LD640
Stroke: 3.540" (89.916 MM)

Cyl Bore:
1.7713-1.7716" (44.991-44.999 MM)
Main:
Main:
DIESEL, 4-STROKE,AIR-COOL,MODEL LDA96,4LD640/L,L10
Comments:
LOMBARDINI
0.7
40
Engine Model
(cont.)
4LD640, LDA96
3.740" (94.996 MM)
7LD665/I
7LD665/I, 720
3.740" (94.996 MM)

Stroke: 3.700" (93.98 MM)
Cyl Bore:
1.9681-1.9685" (49.99-50. MM)
Rods:
1.7712-1.7716" (44.988-44.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR COOLED, ALSO MODEL 720 .091-.093 THRUST WASHER THKNS
LOMBARDINI
0.7
43
FLD705
Stroke: 3.540" (89.916 MM)

Cyl Bore:
1.7713-1.7716" (44.991-44.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR-COOLED, ALSO MODEL LDA100
LOMBARDINI
0.7
45
7LD740/I
Stroke: 3.700" (93.98 MM)

Cyl Bore:
1.9681-1.9685" (49.99-50. MM)
Rods:
1.7712-1.7716" (44.988-44.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR COOLED .091-.093 THRUST WASHER THKNS
LOMBARDINI
0.8
50
7LD740/I
3.937" (100. MM)
4LD820
Stroke: 3.940" (100.076 MM)

Cyl Bore:
1.7713-1.7716" (44.991-44.999 MM)
Main:
Main:
Comments:
DIESEL,4-STROKE,AIR-COOL,MODEL LDA820,4LD820/L,L14
4LD820, LDA82
4.010" (101.854 MM)
LOMBARDINI
LOMBARDINI
FLD705, LDA10
3.940" (100.076 MM)
2 Cylinders
0.7
44
10LD360-2
10LD360-2
3.228" (81.991 MM)

Stroke: 2.677" (67.996 MM)
Cyl Bore:
1.5742-1.5748" (39.985-40. MM)
Rods:
#1 2.1787-2.1791" (55.339-55.349 MM)
Main 1:
#2 2.1626-2.1634" (54.930-54.950 MM)
Main 2:
#3 2.8338-2.8346" (71.979-71.999 MM)
Main 3:
DIESEL, 4-STROKE, AIR-COOLED, DIRECT INJECTION * .0030-.0040 CLR FOR LARGER DIAMETER MAIN
Comments:
BRG
LOMBARDINI
0.8
48
10LD400-2
10LD400-2
3.386" (86.004 MM)

Stroke: 2.677" (67.996 MM)
Cyl Bore:
1.5742-1.5748" (39.985-40.000 MM)
Rods:
#1 2.1787-2.1791" (55.339-55.349 MM)
Main 1:
#2 2.1626-2.1634" (54.930-54.950 MM)
Main:
Main 2:
#3 2.8338-2.8346" (71.979-71.999 MM)
Main 3:
Comments:
BRG
LOMBARDINI
1.1
68
9LD560-2
9LD560-2
3.543" (89.992 MM)

Stroke: 3.464" (87.986 MM)
Cyl Bore:
1.7913-1.7919" (45.499-45.514 MM)
Rods:
#1 2.1787-2.1791" (55.339-55.349 MM)
Main 1:
#2 2.1626-2.1634" (54.93-54.95 MM)
Main:
Main 2:
#3 2.8338-2.8346" (71.979-71.999 MM)
Main 3:
Comments:
BRG
LOMBARDINI
1.3
80
Stroke: 3.700" (93.98 MM)

CENTR 2.1787-2.1791" (55.339-55.349 MM)
Main 1:
OUTER 2.1630-2.1634" (54.94-54.95 MM)
Main:
Main 2:
Comments:
DIESEL, 4-STROKE, AIR-COOLED, ALSO MODEL 904
LOMBARDINI
1.3
8LD600-2
Cyl Bore:
81
8LD665-2
Stroke: 3.700" (93.98 MM)

Cyl Bore:
CENTR 2.1787-2.1791" (55.339-55.349 MM)
Main 1:
OUTER 2.1630-2.1634" (54.94-54.95 MM)
Main:
Main 2:
Comments:
DIESEL,4-STROKE,AIR-COOL,MODELS 914,8LD665-2/L,L20
322
8LD600-2, 904
3.543" (89.992 MM)
3.740" (94.996 MM)
8LD665-2, 914

Make
Liter
CID
Vin
Model
Year
LOMBARDINI
LOMBARDINI
2 Cylinders
1.3
82
5LD675-2
Engine Model
(cont.)
5LD675-2,LDA6
3.740" (94.996 MM)

Stroke: 3.740" (94.996 MM)
Cyl Bore:
2.1787-2.1791" (55.339-55.349 MM)
Rods:
2.5575-2.5582 *" (64.961-64.978 MM)
Main:
Main:
DIESEL, 4-STROKE, AIR-COOLED, ALSO MODEL LDA672 * MODEL LDA672: 2.3598-2.3602
Comments:
LOMBARDINI
1.5
90
Stroke: 3.700" (93.98 MM)

CENTR 2.1787-2.1791" (55.339-55.349 MM)
Main 1:
OUTER 2.1630-2.1634" (54.94-54.95 MM)
Main:
Main 2:
Comments:
DIESEL, 4-STROKE, AIR-COOLED
LOMBARDINI
1.6
8LD740-2
100
5LD825-2
Stroke: 4.134" (105.004 MM)

Cyl Bore:
2.1787-2.1791" (55.339-55.349 MM)
Rods:
2.5575-2.5582" (64.961-64.978 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE,AIR-COOL,MODEL 832,5LD825-2/L,L27
5LD825-2, 832
3.937" (100. MM)
LOMBARDINI
LOMBARDINI
8LD740-2
3.937" (100. MM)
Cyl Bore:
3 Cylinders
1.6
98
11LD535-3
11LD535-3
3.4646-3.4657" (88.000-88.030 MM)

Stroke: 3.4646" (88.000 MM)
Cyl Bore:
1.7913-1.7920" (45.500-45.516 MM)
Rods:
1 3.1803-3.1811" (80.781-80.800 MM)
.110-.126" (2.800-3.200 MM)
Main 1:
Main Fillet:
2 2.1791-2.1799" (55.350-55.370 MM)
Main 2:
3 2.1626-2.1634" (54.931-54.950 MM)
Main 3:
DIESEL, AIR COOLED, DIRECT INJ. MAIN BRG SUPPORTS: FLY SIDE=3.3774-3.3785",
Comments:
CENTER=2.3622-2.3630", GEAR SIDE=3.0705-3.0713"
LOMBARDINI
1.9
114
11LD625-3
11LD625-3
3.7402-3.7413" (95.000-95.030 MM)

Stroke: 3.4646" (88.000 MM)
Cyl Bore:
1.7913-1.7920" (45.500-45.516 MM)
Rods:
1 3.1803-3.1811" (80.781-80.800 MM)
.110-.126" (2.800-3.200 MM)
Main 1:
Main Fillet:
2 2.1791-2.1799" (55.350-55.370 MM)
Main:
Main 2:
3 2.1626-2.1634" (54.931-54.950 MM)
Main 3:
Comments:
DIESEL, AIR COOLED, DIR INJ, ALSO 11LD626-3 MAIN BRG SUPPORTS: FLY SIDE=3.3774-3.3785",
CENTER=2.3622-2.3630", GEAR SIDE=3.0705-3.0713"
LOMBARDINI
2.0
123
5LD675-3
5LD65-3,LDA67
3.740" (94.996 MM)

Stroke: 3.740" (94.996 MM)
Cyl Bore:
2.1787-2.1791" (55.339-55.349 MM)
Rods:
2.5575-2.5582 *" (64.961-64.978 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR-COOLED, ALSO MODEL LDA673 * MODEL LDA673: 2.3598-2.3602
LOMBARDINI
2.5
151
5LD825-3
Stroke: 4.134" (105.004 MM)

Cyl Bore:
2.1787-2.1791" (55.339-55.349 MM)
Rods:
2.5575-2.5582" (64.961-64.978 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE,AIR-COOL,MODEL 833,5LD825-3/L,L40
LOMBARDINI
2.8
170
Stroke: 4.134" (105.004 MM)

2.1787-2.1791" (55.339-55.349 MM)
Rods:
2.5575-2.5582" (64.961-64.978 MM)
Main:
Main:
Comments:
5LD930-3
5LD930-3
4.173" (105.994 MM)
Cyl Bore:
LONG
LONG
5LD825-3, 833
3.937" (100. MM)
3 Cylinders
2.3
143
460
3.7402-3.7411" (95.001-95.024 MM)

Stroke: 4.3307" (110.000 MM)
Cyl Bore:
2.3122-2.3127" (58.730-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.200 MM)
Main:
1.2598-1.2638" (31.999-32.101 MM)
Main:
Thrust Width:
DIESEL, 460 TRACTOR THRUST WASHER THICKNESS .133-.135" (3.378-3.429 MM)
Comments:
323
460

Make
Liter
CID
Vin
Model
Year
LONG
LONG
4 Cylinders
3.1
190
560
Stroke: 4.3307" (110. MM)

Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
Thrust Width:
DIESEL, 560 TRACTOR THRUST WASHER THKNS .133-.135
Comments:
LONG
3.6
219
560
3.7402-3.7411" (95.001-95.024 MM)
1.2598-1.2638" (32.000-32.101 MM)
2610
Stroke: 4.3307" (110. MM)

Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, 2610 TRACTOR THRUST WASHER THKNS .133-.135
2610
4.0157-4.0167" (101.999-102.024 MM)
1.2598-1.2638" (32.000-32.101 MM)
MACK
MACK
Engine Model
6 Cylinders
3.4
209
3.188" (80.975 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.241" (31.521 MM)
Main:
Thrust Width:
B600C601, D186C300, D600C218, D600C368, D600C601, D600C603, F186C300, F400C209, F400C222,
Casting Numbers:
F400C228
MACK
3.7
226
Stroke: 4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
Rods:
#1 2.3744-2.3752" (60.31-60.33 MM)
Main:
Main:
F600C502A, F600C504, F600C606A
Casting Numbers:
MACK
4.1
4.4
4.8
5.4
5.5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.625" (92.075 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.464" (37.186 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.750" (95.25 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.464" (37.186 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.000" (101.6 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.464" (37.186 MM)
330
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
456GC4132LB, 47925C2, M600C501
Casting Numbers:
MACK
3.500" (88.9 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.464" (37.186 MM)
290
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
456GC4132LB, 47925C2, M600C501
Casting Numbers:
MACK
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
270
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
M600C501
Casting Numbers:
MACK
3.313" (84.15 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.194" (30.328 MM)
253
Stroke: 4.375" (111.125 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
M600C501
Casting Numbers:
MACK
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
335
MIDR 06.02.12
Stroke: 4.409" (111.989 MM)

Cyl Bore:
2.5580-2.5590" (64.973-64.999 MM)
Rods:
ALL 2.7560-2.7570" (70.002-70.028 MM)
Main:
Main:
Thrust Width:
Balance: Internal
5000133885
Casting Numbers:
Comments:
MIDLINER, RENAULT MACK RECOMMENDS NOT-REGRIND
324
84-89
MIDR 06.02.12
4.0161-4.0173" (102.009-102.039 MM)
@ #4

Make
Liter
CID
Vin
Model
Year
MACK
MACK
6 Cylinders
6.2
377
MIDR 06.02.26
Stroke: 4.9606" (125.999 MM)

Cyl Bore:
2.5587-2.5591" (64.991-65.001 MM)
Rods:
Rod Fillet:
2.9921-2.9929" (75.999-76.02 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
4.3298-4.3307" (109.977-110. MM)
Rear Seal Diameter:
I, K, L, K DIESEL, MIDLINER, RENAULT THRUST BRG STD .132-.134
Comments:
MACK
6.2
6.6
7.1
7.2
Cyl Bore:
Rod Fillet:
Main Fillet:
4.000" (101.600 MM)

.109" (2.769 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
4.000" (101.600 MM)

.140" (3.556 MM)
.140" (3.556 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
4.125" (104.775 MM)

.141" (3.581 MM)
.141" (3.581 MM)
431
Stroke: 5.375" (136.525 MM)

2.7475-2.7480" (69.787-69.799 MM)
Rods:
#1-3 3.4975-3.4980" (88.837-88.849 MM)
Main 1:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main:
Main 2:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 3:
#7 3.4965-3.4970" (88.811-88.824 MM)
Main 4:
456GC417
Casting Numbers:
MACK
438
Stroke: 5.000" (127.000 MM)

Cyl Bore:
2.7475-2.7480" (69.787-69.799 MM)
Rods:
Rod Fillet:
#1 3.4970-3.4980" (88.824-88.849 MM)
Main 1:
Main Fillet:
#2-3 3.4975-3.4980" (88.837-88.849 MM)
Main:
Main 2:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main 3:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 4:
456GC4121, 456GC419, 456GC435, 456GC517, 456GC517A
Casting Numbers:
MACK
7.6
7.8
475
Stroke: 4.9190" (124.943 MM)

2.9520-2.9527" (74.981-74.999 MM)
Rods:
3.3457-3.3465" (84.981-85.001 MM)
Main:
Main:
Comments:
SCANIA, END-475
MACK
7.8
MACK
8.2
4.438" (112.725 MM)

.141" (3.581 MM)
.141" (3.581 MM)
475
477
END-475
4.5270" (114.986 MM)
Cyl Bore:
Stroke: 4.938" (125.425 MM)

2.9520-2.9527" (74.981-74.999 MM)
Rods:
3.3457-3.3465" (84.981-85.001 MM)
Main:
Main:
Comments:
SCANIA
Stroke: 4.375" (111.125 MM)

2.7475-2.7480" (69.787-69.799 MM)
Rods:
#1-3 3.4975-3.4980" (88.837-88.849 MM)
Main 1:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main:
Main 2:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 3:
#7 3.4965-3.4970" (88.811-88.824 MM)
Main 4:
456GC-417
Casting Numbers:
4.312" (109.525 MM)

.141" (3.581 MM)
.141" (3.581 MM)
464
Stroke: 5.000" (127.000 MM)

Cyl Bore:
2.7475-2.7480" (69.787-69.799 MM)
Rods:
Rod Fillet:
#1-3 3.4975-3.4980" (88.837-88.849 MM)
Main 1:
Main Fillet:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main:
Main 2:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 3:
#7 3.4965-3.4970" (88.811-88.824 MM)
Main 4:
456GC-419, 456GC435, 456GC517, 456GC517A
Casting Numbers:
MACK
MIDR 06.02.26
4.0161-4.0173" (102.009-102.039 MM)

.118" (2.997 MM)
.158" (4.013 MM)
1.535-1.538" @ #4
405
Stroke: 5.375" (136.525 MM)

2.7475-2.7480" (69.787-69.799 MM)
Rods:
#1-3 3.4975-3.4980" (88.837-88.849 MM)
Main 1:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main:
Main 2:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 3:
#7 3.4965-3.4970" (88.811-88.824 MM)
Main 4:
456GC4132B, 456GC417
Casting Numbers:
MACK
(cont.)
377
Stroke: 5.000" (127.000 MM)

2.3725-2.3730" (60.262-60.274 MM)
Rods:
#1 2.9975-2.9980" (76.137-76.149 MM)
Main:
Main: Numbers:
456GC4132, 456GC4135, 47924A8
Casting
MACK
90-04
Engine Model
477
477
Cyl Bore:
4.5276" (115.001 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
4.438" (112.725 MM)

.141" (3.581 MM)
.141" (3.581 MM)
500
325

Make
Liter
CID
Vin
Model
Year
MACK
MACK
6 Cylinders
8.4
MACK
8.8
538
5.118" (129.997 MM)

2.8331-2.8339" (71.961-71.981 MM)
ALL 3.7782-3.7790" (95.966-95.987 MM)

Main:
Main:
Balance: Internal
5.905-5.910" (149.987-150.114 MM)
Rear Seal Diameter:
Comments:
MS 300 MIDLINER, RENAULT * DO NOT REGRIND
MACK
8.8
4.438" (112.725 MM)

.141" (3.581 MM)
.141" (3.581 MM)
MIDS 06.20.30
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
MACK
9.8
79-88
MIDS 06.20.30
4.7251-4.7263" (120.018-120.048 MM)

.1986-.2165" (5.044-5.499 MM)
1.970" (50.038 MM)
.1575-.1772
1.576-1.577 @#4
540
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.7472-2.7480" (69.779-69.799 MM)
Rods:
Rod Fillet:
#1-3 3.4975-3.4980" (88.837-88.849 MM)
Main 1:
Main Fillet:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main:
Main 2:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 3:
#7 3.4965-3.4970" (88.811-88.824 MM)
Main 4:
456GC4121, 456GC4121B, 456GC519, 616A15
Casting Numbers:
Stroke:
Rods:
(cont.)
510
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.7475-2.7480" (69.787-69.799 MM)
Rods:
Rod Fillet:
#1-3 3.4975-3.4980" (88.837-88.849 MM)
Main 1:
Main Fillet:
#4 3.4965-3.4970" (88.811-88.824 MM)
Main 2:
#5-6 3.4975-3.4980" (88.837-88.849 MM)
Main 3:
#7 3.4965-3.4970" (88.811-88.824 MM)
Main 4:
456GC4121, 456GC4121B, 456GC519, 616A15
Casting Numbers:
Stroke:
Rods:
Engine Model
600
5.7086" (144.998 MM)

3.0299-3.0307" (76.959-76.98 MM)
4.562" (115.875 MM)

.141" (3.581 MM)
.141" (3.581 MM)
MIDR 06.20.45
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
E5-240
4.7244" (120. MM)

.1675-.1772" (4.255-4.501 MM)
1.9691-1.9711" (50.015-50.066 MM)
.1675-.1772" (4.254-4.501 MM)
1.6929-1.6944" (43.000-43.038 MM)
3.7782-3.7790" (95.966-95.987 MM)

Main:
Main:
5.8992-5.9055" (149.84-150. MM)
Rear Seal Diameter:
Comments:
DIESEL, AIR COOLED,VERTICAL,DIRECT INJ,MACK E5-240 DO NOT GRIND CRANK / O.S. THRUST
WASHERS AVLBL
MACK
9.9
605
Stroke: 6.000" (152.4 MM)

2.9970-2.9990" (76.124-76.175 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
Comments:
ENDM605, 4" CRANK
MACK
11.0
672
Stroke: 6.000" (152.4 MM)

2.9970-2.9990" (76.124-76.175 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
Comments:
END-673 & ENDT-673-SER #ENDT-673-62-63
MACK
11.0
605
ENDM605
4.625" (117.475 MM)
Cyl Bore:
673
END-673,ENDT
Cyl Bore:
4.8755-4.8770" (123.838-123.876 MM)
Thrust Width:
2.615" (66.421 MM)
672
E6
58-89
E6 2VLV HEAD
4.875" (123.825 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9970-2.9980" (76.124-76.149 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
#1 3.9980-3.9990" (101.549-101.575 MM)
.141" (3.581 MM)
Main:
Main Fillet:
2.615-2.618
Main:
Thrust Width:
Balance: Internal
456GC518A, 456GC518E, 456GC518F, 456GC543, 456GC545, 456GCF586
Casting Numbers:
Comments:
DIESEL, 2 VALVE HEAD, 675
MACK
11.0
Stroke: 6.000" (152.4 MM)

2.9970-2.9980" (76.124-76.149 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
Balance: Internal
5.999" (152.375 MM)
Rear Seal Diameter:
Comments:
673, 4 VALVE HEAD
672
E6-4VH
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
326
88-97
E6 4 VLV HEAD
4.8755-4.8770" (123.838-123.876 MM)

.141" (3.581 MM)
.141" (3.581 MM)
2.620 @ #4

Make
Liter
CID
Vin
Model
Year
MACK
MACK
6 Cylinders
11.1
675
675
Stroke: 6.000" (152.4 MM)

2.9975-2.9980" (76.137-76.149 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
ENDT-675, 4 VALVE HEAD
Comments:
MACK
11.1
676
MACK
11.6
707
Stroke: 6.000" (152.4 MM)

2.9970-2.9990" (76.124-76.175 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
Comments:
EN707
MACK
11.6
(cont.)
ENDT-675 4VLV
4.875" (123.825 MM)
Cyl Bore:
676
Stroke: 6.000" (152.4 MM)

2.9970-2.9990" (76.124-76.175 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
Comments:
ETAB676B
Engine Model
ETAB676B
Cyl Bore:
4.8755-4.8770" (123.838-123.876 MM)
Thrust Width:
2.615
EN
707
EN707
5.000" (127. MM)
Cyl Bore:
707
5.000" (127. MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9970-2.9980" (76.124-76.149 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
#1 3.9980-3.9990" (101.549-101.575 MM)
.141" (3.581 MM)
Main:
Main Fillet:
2.756" (70.002 MM)
Main:
Thrust Width:
456GC518A, 456GC518A, 456GC518E, 456GC518E, 456GC518F, 456GC518F, 456GC543, 456GC543,
Casting Numbers:
456GC545, 456GC545
MACK
11.7
Stroke:
Rods:
Main:
Main:
6.000" (152.4 MM)

2.9975-2.9980" (76.137-76.149 MM)
3.9980-3.9990" (101.549-101.575 MM)
Stroke:
Rods:
6.500" (165.1 MM)

3.2470-3.2480" (82.474-82.499 MM)
MACK
12.0
711
711
728
E7
Cyl Bore:
Rod Fillet:
Rod Width:
#1 4.4966-4.4974" (114.214-114.234 MM)
Main:
Main Fillet:
Main:
Thrust Width:
456-CFG-5128, 456-CFG-5137, 456-GC-5138, 456-GC-5140
Casting Numbers:
Comments:
12.0L DIESEL, 4 VALVE PER CHAMBER
MACK
12.0
728
Stroke: 6.500" (165.000 MM)

3.2470-3.2480" (82.474-82.499 MM)
Rods:
4.4964-4.4974" (114.209-114.234 MM)
Main:
Main:
Comments:
DIESEL
MACK
14.2
864
98-05
E-TECH
4.8755-4.8770" (123.838-123.876 MM)
14.2
16.3
Stroke: 5.5000" (139.7 MM)

3.7470-3.7480" (95.174-95.199 MM)
Rods:
#1 4.4964-4.4974" (114.209-114.234 MM)
Main:
Main:
2.500" (63.5 MM)
5.997" (152.324 MM)
Rear Seal Diameter:
Comments:
V8 DIESEL
864
865
864
5.000" (127. MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

3.7470-3.7480" (95.174-95.199 MM)
Rods:
3.9980-3.9990" (101.549-101.575 MM)
Main:
Main:
Comments:
866/TRUCK
MACK
E7
8 Cylinders
5.500" (139.7 MM)

3.9980-3.9990" (101.549-101.575 MM)
MACK
89-02
4.8755-4.8770" (123.838-123.876 MM)

.219" (5.563 MM)
2.085" (52.959 MM)
.156" (3.962 MM)
2.261-2.264 @#4
E-TECH
Cyl Bore:
MACK
Stroke:
Main:
Main:
711
5.000" (127. MM)
Cyl Bore:
865
Thrust Width:
998
E9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
327
865, 866
5.250" (133.35 MM)
Cyl Bore:
@ #4
90-01
E9
5.3745-5.3755" (136.512-136.538 MM)

9/64 (.141")
9/64 (.141")
2.071 @ #3

Make
Liter
CID
Vin
Model
MASERATI
MASERATI
2.5
122
80-88
Cyl Bore:
Rod Fillet:
3.228" (81.991 MM)

.109" (2.769 MM)
Thrust Width:
1.062
BI-TURBO BI-TURBO
MASSEY FERGUSON
MASSEY FERGUSON
2 Cylinders
1.1
65
Stroke: 3.465" (88.011 MM)

2.0850-2.0858" (52.959-52.979 MM)
Rods:
2.7543-2.7551" (69.959-69.98 MM)
Main:
Main:
DIESEL, TOYOSHA S107
Comments:
MASSEY FERGUSON
1.3
MASSEY FERGUSON
1.5
MF205
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
77
Stroke: 3.740" (94.996 MM)

2.2819-2.2827" (57.96-57.981 MM)
Rods:
2.7543-2.7551" (69.959-69.98 MM)
Main:
Main:
Comments:
DIESEL, TOYOSHA P126
90
0.9
53
1.1
1.4
69
2.0
MASSEY FERGUSON
3.3
4.724" (119.99 MM)

2.6764-2.6772" (67.981-68.001 MM)
@ #3
1020
Thrust Width:
87
CS112
2.953" (75.006 MM)
Cyl Bore:
@ #3
1030
MS142
3.228" (81.991 MM)
Cyl Bore:
Thrust Width:
122
Stroke: 3.9370" (100.00 MM)

2.2819-2.2827" (57.960-57.980"
Rods:
2.7543-2.7551" (69.960-69.980 MM)
Main:
Main:
Comments:
DIESEL, TOYOSHA 3D200 ENGINE
CS86
2.756" (70.002 MM)
Thrust Width:
Stroke: 3.543" (89.992 MM)

1.8882-1.8890" (47.96-47.981 MM)
Rods:
2.3606-2.3614" (59.959-59.98 MM)
Main:
Main:
Comments:
DIESEL, MS142, HINOMOTO, DIR INJ, 4 STROKE
MASSEY FERGUSON
1010
Cyl Bore:
Stroke: 3.347" (85.014 MM)

1.8882-1.8890" (47.96-47.981 MM)
Rods:
2.3606-2.3614" (59.959-59.98 MM)
Main:
Main:
Comments:
DIESEL, HINOMOTO MODEL CS112
MASSEY FERGUSON
S148
3.819" (97.003 MM)
.079-.098" (2.007-2.489 MM)
.079-.098" (2.008-2.489 MM)
@ CENTER
3 Cylinders
Stroke: 2.953" (75.006 MM)

1.8882-1.8890" (47.96-47.981 MM)
Rods:
2.3606-2.3614" (59.959-59.98 MM)
Main:
Main:
DIESEL, HINOMOTO MODEL CS86
Comments:
MASSEY FERGUSON
P126
3.622" (91.999 MM)
.079-.098" (2.007-2.489 MM)
.079-.098" (2.007-2.489 MM)
@ CENTER
MF220
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
MASSEY FERGUSON
MASSEY FERGUSON
S107
3.4646-3.4654" (88.001-88.021 MM)
.079-.098" (2.007-2.489 MM)
.079-.098" (2.007-2.489 MM)
@ CENTER
MF210
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.937" (100. MM)

2.2819-2.2827" (57.96-57.981 MM)
Rods:
2.7543-2.7551" (69.959-69.98 MM)
Main:
Main:
Comments:
DIESEL, TOYOSHA S148
Stroke:
Rods:
Engine Model
4 Cylinders
Stroke: 2.480" (62.992 MM)

1.9665-1.9670" (49.949-49.962 MM)
Rods:
#1 2.7519-2.7522" (69.898-69.906 MM)
Main:
Main:
3.936" (99.974 MM)
Rear Seal Diameter:
1
Casting Numbers:
Comments:
Year
@ #3
1045
3D200
Cyl Bore:
3.6220-3.6229" (92.000-92.022 MM)
Main Fillet:
.0787-.0984" (2.000-2.500 MM)
201
320
Cyl Bore:
320D, 320DS
4.252" (108.001 MM)
1.5748-1.5811" (40.-40.16 MM)

Rod Width:
3.3459-3.3472" (84.986-85.019 MM)
Main:
1.772-1.775" @ #4
Main:
Thrust Width:
Comments:
DIESEL, 320D, 320DS PERKINS VALMET ENGINE, DIR INJ MAIN BRG THKNS .1163-.1167
328

Make
Liter
CID
Vin
Model
MASSEY FERGUSON
MASSEY FERGUSON
2.1
129
TO30
Z129
3.250" (82.55 MM)
.094" (2.388 MM)
.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Z129 CONTINENTAL ENGINE
MASSEY FERGUSON
2.2
134
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
Z-129C-205, Z-129C-500, Z-134C-500
Casting
Comments:
Engine Model
4 Cylinders
Stroke: 3.875" (98.425 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
Z-129C-205, Z-129C-500, Z-134C-500
Casting
Comments:
Year
TO35
Z134
3.313" (84.15 MM)
.094" (2.388 MM)
.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Z-134 GAS, CONTINENTAL ENGINE
MASSEY FERGUSON
2.3
138
23C
23C
3.3125" (84.138 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.3110-2.3115" (58.699-58.712 MM)
Rods:
2.7515-2.7520" (69.888-69.901 MM)
Main:
@ REAR
Main:
Thrust Width:
EN24
Casting Numbers:
Comments:
STANDARD DIESEL TRACTOR THRUST WASHER THKNS .091-.093, .005 O.S. THRUST WASHER AVLBL
MASSEY FERGUSON
2.4
145
Stroke: 4.063" (103.2 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
Z134C-500
Casting Numbers:
Comments:
GAS, CONTINENTAL Z145 ENGINE
MASSEY FERGUSON
2.6
157
Stroke: 4.375" (111.125 MM)

2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
G176C-300C
Casting Numbers:
Comments:
GAS, MF 65 TRACTOR
MASSEY FERGUSON
3.4
MF245
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
MF65
206
MF180
Stroke: 4.500" (114.300 MM)

Cyl Bore:
2.0615-2.0625" (52.362-52.388 MM)
Rods:
2.3740-2.3750" (60.300-60.325 MM)
Main:
Main:
Comments:
GAS, EARLY MF180 TRACTOR, CONTINENTAL G-206 ENGINE
MASSEY FERGUSON
4.0
MASSEY FERGUSON
Stroke:
Rods:
242
4.4
G-206
3.8125" (96.838 MM)
MF85
268
E242
3.875" (98.425 MM)
Cyl Bore:
4.724" (119.99 MM)

2.6764-2.6772" (67.981-68.001 MM)
G176
3.578" (90.881 MM)
Cyl Bore:
Stroke: 5.125" (130.175 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
E242C-300, E242C-600
Casting Numbers:
Comments:
E 242 GAS TRACTOR
Z145
3.375" (85.725 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.5030
420
420D,420DS,W,
4.252" (108.001 MM)
Cyl Bore:
1.5748-1.5811" (40.-40.16 MM)

Rod Width:
3.3459-3.3472" (84.986-85.019 MM)
Main:
1.772-1.775" @ #5
Main:
Thrust Width:
Comments:
DIESEL,420D,420DS,420DW,420DWI PERKINS VALMET,D.I. ADD'L COUNTERBALANCE GEAR RIM:
OD=5.9142-5.9157, ID=5.9055-5.9071 / MAIN BRG THKNS=.1163-.1167
MASSEY FERGUSON
5.2
318
4.318
285
4.5025-4.5035" (114.364-114.389 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7483-2.7490" (69.807-69.825 MM)
.188-.203" (4.775-5.156 MM)
Rods:
Rod Fillet:
2.9985-2.9990" (76.162-76.175 MM)
.145-.160" (3.683-4.064 MM)
Main:
Main Fillet:
2.122" @ #3
Main:
Thrust Width:
Balance: Internal
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31315841, 31315843, 31315952, 31315971, 31316323, 31316324, 31316325
Casting Numbers:
Comments:
PERKINS AGRI 285 TRACTOR
329

Make
Liter
CID
Vin
Model
Year
MASSEY FERGUSON
MASSEY FERGUSON
Engine Model
6 Cylinders
6.6
402
620
620D, 620DS
4.252" (108.001 MM)

Stroke: 4.725" (120.015 MM)
Cyl Bore:
2.6764-2.6772" (67.981-68.001 MM)
Rods:
3.3459-3.3472" (84.986-85.019 MM)
Main:
1.772-1.775 @ #7
Main:
Thrust Width:
DIESEL, 620D, 620DS PERKINS VALMET ENG, DIR INJ MAIN BRG THKNS .1163-.1167
Comments:
MASSEY FERGUSON
Stroke:
Rods:
7.4
449
634
5.276" (134.01 MM)

2.6764-2.6772" (67.981-68.001 MM)
634DSI
4.252" (108.001 MM)
Cyl Bore:
1.5748-1.5811" (40.-40.16 MM)

Rod Width:
3.3459-3.3472" (84.986-85.019 MM)
Main:
1.772-1.775" @ #7
Main:
Thrust Width:
Comments:
DIESEL, 634DSI PERKINS VALMET ENGINE, DIR INJ MAIN BRG THKNS .1163-.1167
MASSEY FERGUSON
9.5
580
D600C
Stroke: 5.512" (140.005 MM)

3.3456-3.3465" (84.978-85.001 MM)
Rods:
#1 4.1335-4.1344" (104.991-105.014 MM)
Main:
Main:
Comments:
HANOMEG D962B GERMAN DIESEL
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
D962B
4.724" (119.99 MM)
.189-.203" (4.801-5.156 MM)
.189-.203" (4.801-5.156 MM)
1.890-1.892"
MAZDA
MAZDA
4 Cylinders
1.3
78
Stroke: 2.992" (75.997 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
0324
Casting Numbers:
Comments:
MAZDA
1.3
78
1.4
1.4
86
86
1.5
1.5
90
MAZDA
1.5
D5FE
E5
79-80
84-86
GLC
Thrust Width:
UA
81-85
3.031" (76.987 MM)
@ #5
70-79
Cyl Bore:
330
UC
UC
D5FE
3.030" (76.962 MM)
Cyl Bore:
90
79-80
3.031" (76.987 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

1.5724-1.5730" (39.939-39.954 MM)
Rods:
1.9661-1.9667" (49.939-49.954 MM)
Main:
Main:
Comments:
SOHC, GLC
Stroke: 3.307" (83.998 MM)

1.9670-1.9680" (49.962-49.987 MM)
Rods:
2.4790-2.4800" (62.967-62.992 MM)
Main:
Main:
3823, 4894
Casting Numbers:
Comments:
FORKLIFT
GLC WAGON
D5
TC
3.031" (76.987 MM)
Cyl Bore:
90
76-78
GLC SEDAN
Stroke: 3.150" (80.01 MM)

1.5724-1.5731" (39.939-39.957 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
E501
Casting Numbers:
Comments:
2BC, INDUSTRIAL, FORKLIFT
MAZDA
TC
2.874" (73. MM)
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.5724-1.5730" (39.939-39.954 MM)
Rods:
1.9661-1.9667" (49.939-49.954 MM)
Main:
Main:
Comments:
SOHC, 2BC, GLC WAGON, MIZER
MAZDA
GLC
Cyl Bore:
Stroke: 2.992" (75.997 MM)

1.5724-1.5730" (39.939-39.954 MM)
Rods:
1.9661-1.9667" (49.939-49.954 MM)
Main:
Main:
8034
Casting Numbers:
Comments:
SOHC, 2BC, GLC SEDAN, MIZER
MAZDA
76-78
2.874" (73. MM)
SOHC, 2BC MIZER, GLC, 808
Stroke: 2.992" (75.997 MM)

1.5724-1.5730" (39.939-39.954 MM)
Rods:
1.9661-1.9667" (49.939-49.954 MM)
Main:
Main:
8034
Casting Numbers:
Comments:
SOHC, 2BC MIZER, GLC, 808
MAZDA
GLC
Cyl Bore:
2.952" (74.981 MM)
E5

Make
Liter
CID
Vin
Model
Year
MAZDA
MAZDA
4 Cylinders
1.5
91
Z5
Stroke: 3.2913" (83.599 MM)

1.5724-1.5731" (39.939-39.957 MM)
Rods:
1.9661-1.9667" (49.939-49.954 MM)
Main:
Main:
1.437" (36.5 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
B3C7
Casting Numbers:
Comments:
MAZDA
PROTG
Engine Model
(cont.)
95-98
Cyl Bore:
2.9646-2.9653" (75.301-75.319 MM)
Thrust Width:
.948-.950 @ #4*
Z5
DOHC, PROTG * OVERSIZE THRUST WASHERS AVAILABLE (TB-1573)
1.6
97
B6
323
87-92
3.0711-3.0714" (78.006-78.014 MM)

Stroke: 3.291" (83.591 MM)
Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
.062" (1.575 MM)
Rods:
Rod Fillet:
#1 1.9661-1.9668" (49.939-49.957 MM)
.093" (2.362 MM)
Main:
Main Fillet:
.951 @ #4
Main:
Thrust Width:
Balance: Internal
1.190" (30.226 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
B630
Casting Numbers:
Comments:
SOHC, MX3, 323, EFI, 16 VALVE HEAD ** LATER CRANKS HAVE A 1.062" DIAMETER.
THRUST BRG
LENGTH: .0995
MAZDA
1.6
97
B6
Stroke: 3.291" (83.591 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
#1 1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
Balance: Internal
1.190" (30.226 MM)
3.267" (82.982 MM)
Rear Seal Diameter:
B630
Casting Numbers:
Comments:
SOHC, 323, EFI, 8 VALVE ** 1.0620, 1989-92
MAZDA
1.6
97
323
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
93-94
3.0711-3.0714" (78.006-78.014 MM)
.062" (1.575 MM)
.093" (2.3622 MM)
.951 @ #4
70-81
3.071" (78.003 MM)

Stroke: 3.270" (83.058 MM)
Cyl Bore:
2.0842-2.0848" (52.939-52.954 MM)
Rods:
#1 2.4779-2.4785" (62.939-62.954 MM)
Main:
3.1500" (80.01 MM)
Main:
Rear Seal Diameter:
305, B, DCI, K
Casting Numbers:
Comments:
NA, MODEL 616 (CAPELLA) OHC, MADE IN EQUADOR NA ENGINE, 1586CC
MAZDA
1.6
97
98
B6
73-78
2.0842-2.0848" (52.939-52.954 MM)

Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
Comments:
2BC
MAZDA
1.6
Stroke: 3.291" (83.591 MM)

1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9662-1.9668" (49.941-49.957 MM)
Main:
Main:
B630
Casting Numbers:
Comments:
EFI, 323
MAZDA
1.6
323
Thrust Width:
98
BP
1.6
98
@ #4
MIATA
Stroke: 3.291" (83.591 MM)

Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
Thrust Width:
B657, DOHC
Casting Numbers:
Comments:
DOHC, EFI PORT, MIATA O/S THRUST BRGS .010,.020,.030 AVLBL
MAZDA
85-86
3.071" (78.003 MM)
Cyl Bore:
B6
MIATA
Stroke: 3.291" (83.591 MM)

Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
Main:
Balance: Internal
B6S
Casting Numbers:
Comments:
DOHC, MIATA, MX3, EFI STD. THRUST BRG LENGTH .0995
331
90-92
3.0711-3.0714" (78.006-78.014 MM)
@ #4
90-95
3.0711-3.0714" (78.006-78.014 MM)
NA

Make
Liter
CID
Vin
Model
Year
MAZDA
MAZDA
4 Cylinders
1.6
98
ZM
Stroke: 3.280" (83.600 MM)

1.7693-1.7699" (44.940-44.956 MM)
Rods:
1.9661-1.9667" (49.938-49.956 MM)
Main 1:
.0007-.0014" (.018-.036 MM)
Main 6:
DOHC, SFI
Comments:
MAZDA
1.8
PROTG
1.8
112
98-02
70-79
Stroke: 3.701" (94.005 MM)

Cyl Bore:
2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
0290, LH
Casting Numbers:
Comments:
SOHC, 2BC 616, 808, B1600 618, B1800, FORD COURIER
MAZDA
(cont.)
BP
ZM
3.0709-3.0716" (78.000-78.019 MM)
Cyl Bore:
110
Engine Model
VC
3.071" (78.003 MM)
MIATA
90-96
3.2679-3.2682" (83.005-83.012 MM)

Stroke: 3.346" (84.988 MM)
Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
.950 @ #4
Main:
Thrust Width:
Balance: Internal
3.268" (83.007 MM)
Rear Seal Diameter:
B657, DOHC
Casting Numbers:
Comments:
DOHC, VIN 6,P,EFI, MIATA,PROTEGE,FREE WHEELING ENG O/S THRUST BRGS AVLBL: .010,.020,.030
MAZDA
1.8
112
MIATA
97-04
NB
3.2679-3.2682" (83.005-83.012 MM)

Stroke: 3.3460" (84.988 MM)
Cyl Bore:
1.7693-1.7699" (44.940-44.955 MM) *
Rods:
1.9661-1.9668" (49.939-49.957 MM) **
Main:
.950" (24.130 MM) @ #4
Main:
Thrust Width:
Balance: Internal
3.268" (83.007 MM)
Rear Seal Diameter:
Comments:
DOHC, EFI, MIATA, PROTG, NON-HYDRAULIC * REPORTED 12-16-02 MC 1.8874-1.8880" (47.94-47.955
MM)
** REPORTED 12-16-02 MC 2.2022-2.2030" (55.936-55.956 MM) CASTING NUMBER FT01, AND
HAND WRITTEN BBCB 23221
MAZDA
1.8
112
1.8
112
75-84
GN
Casting Numbers:
Comments:
SOHC, CHAIN DRIVEN,
MAZDA
BP
PROTG
90-92
3.2679-3.2682" (83.005-83.012 MM)

Stroke: 3.346" (84.988 MM)
Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
@ #4
Main:
Thrust Width:
DOHC
Casting Numbers:
Comments:
SOHC, EFI, 16 VALVE, PROTG O/S THRUST BRGS AVLBL: .010,.020,.030
MAZDA
1.8
112
PROTG
93-94
3.2679-3.2682" (83.005-83.012 MM)

Stroke: 3.346" (84.988 MM)
Cyl Bore:
1.7693-1.7699" (44.94-44.955 MM)
Rods:
1.9661-1.9668" (49.939-49.957 MM)
Main:
@ #4
Main:
Thrust Width:
DOHC
Casting Numbers:
Comments:
SOHC, EFI, 16 VALVE, PROTG, BP O/S THRUST BRGS AVLBL: .010,.020,.030
MAZDA
2.0
120
626
Stroke: 3.858" (97.993 MM)

Cyl Bore:
2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
Comments:
SOHC, 2BC CHAIN DRIVER 626, B2000, FORD COURIER
MAZDA
2.0
Stroke: 3.390" (86.106 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
FE01, FE50
Casting Numbers:
Comments:
SOHC, 626
120
MA
79-84
3.150" (80.01 MM)
626
Cyl Bore:
Thrust Width:
332
84-87
3.390" (86.106 MM)
@ #3
MA

Make
Liter
CID
Vin
Model
Year
MAZDA
MAZDA
4 Cylinders
2.0
120
MA
Stroke: 3.858" (97.993 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
2BC, B2000
Comments:
MAZDA
2.0
2.0
MA
2.0
2.0
120
2.0
@ #3
MA
121
81-81
Cyl Bore:
3.150" (80.01 MM)
Cyl Bore:
3.2283-3.2291" (81.999-82.019 MM)
VA
TRIBUTE
01-04
3.3386-3.3390" (84.800-84.810 MM)
Cyl Bore:
122
MA
71-79
121
Stroke: 3.4646" (88.000 MM)

1.8461-1.8468" (46.890-46.910 MM)
Rods:
2.2827-2.2835" (57.980-58.000 MM)
Main:
Main:
Comments:
ZETEC, TRIBUTE
MAZDA
84-86
3.390" (86.106 MM)
Thrust Width:
Stroke: 3.7000" (93.98 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
0552
Casting Numbers:
Comments:
LIFT TRUCK, GAS OR LPG, 4 STROKE
MAZDA
@ #5
B2000
Cyl Bore:
Stroke: 3.858" (97.993 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4779-2.4785" (62.939-62.954 MM)
Main:
Main:
Comments:
SOHC, 2BC
MAZDA
82-84
Thrust Width:
120
(cont.)
3.150" (80.01 MM)
Cyl Bore:
Stroke: 3.390" (86.106 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
FE01, FE50
Casting Numbers:
Comments:
SOHC, B2000
MAZDA
B2000
Engine Model
LF
04-05
3.4449-3.4460" (87.500-87.530 MM)
Cyl Bore:
1.8497-1.8503" (46.980-47.000 MM)

Rods:
2.0464-2.0472" (51.980-52.000 MM)
Main:
Main:
Comments:
DOHC
MAZDA
2.0
122
FE
Stroke: 3.386" (86.004 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
3975, FE-01, FE-50, U975
Casting Numbers:
Comments:
SOHC, EFI, 626
MAZDA
2.0
2.0
122
RF
2.0
@ #3
626
122
FS
122
84-85
3.390" (86.106 MM)
Cyl Bore:
Stroke: 3.622" (91.999 MM)

1.8874-1.8880" (47.94-47.955 MM)
Rods:
2.2022-2.2030" (55.936-55.956 MM)
Main:
Main:
FS07
Casting Numbers:
Comments:
DOHC, MPI, 16 VALVE, 626, MR2, MX6
MAZDA
83-87
3.3859-3.3866" (86.002-86.02 MM)
Thrust Width:
Stroke: 3.390" (86.106 MM)

2.0055-2.0063" (50.94-50.96 MM)
Rods:
2.3598-2.3605" (59.939-59.957 MM)
Main:
Main:
Comments:
626 DIESEL
MAZDA
626
Cyl Bore:
626,MR2
Thrust Width:
FE(1)
93-02
3.2677-3.2685" (83.-83.02 MM)
Cyl Bore:
B2000
@ #4
83-88
3.3859-3.3866" (86.002-86.020 MM)

Stroke: 3.390" (86.106 MM)
Cyl Bore:
2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
1.106" @ #3
Main:
Thrust Width:
3975, FE-01, FE-50, U975
Casting Numbers:
Comments:
SOHC, EFI, 626, B2000 THRUST BEARING LENGTH STD 1.102" (27.991 MM)
333
FE

Make
Liter
CID
Vin
Model
MAZDA
MAZDA
4 Cylinders
2.0
122
FE
Stroke: 3.3900" (86.106 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
1.338" (33.982 MM)
Front
3.544" (90.017 MM)
Rear Seal Diameter:
FE-01, FE-50
Casting Numbers:
Comments:
MAZDA
2.2
F2SA
2.2
F2
133
F2
2.2
133
2.2
135
2.3
626
F2
88-92
3.3858-3.3866" (85.999-86.02 MM)
1.106 @ #3
B2200
87-93
Cyl Bore:
3.3858-3.3866" (85.999-86.02 MM)
Thrust Width:
1.106 @ #3
Cyl Bore:
3.500" (88.9 MM)
S-2
82-84
Thrust Width:
140
F2
3.3900" (86.106 MM)
Cyl Bore:
Stroke: 3.504" (89.002 MM)

2.0861-2.0866" (52.987-53. MM)
Rods:
2.5586-2.5591" (64.988-65.001 MM)
Main:
Main:
Comments:
OHV, DIESEL, P/U TRUCK
MAZDA
FE
SOHC, FORKLIFT ENGINE 1998 CC'S
Stroke: 3.700" (93.98 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
Balance: Internal
1.338" (33.985 MM)
3.542" (89.967 MM)
Rear Seal Diameter:
F201, FE201
Casting Numbers:
Comments:
2BC, B2200, 8 VALVE HEAD OHC
MAZDA
(cont.)
84-87
Stroke: 3.700" (93.98 MM)

Cyl Bore:
2.0055-2.0061" (50.94-50.955 MM)
Rods:
#1 2.3597-2.3604" (59.936-59.954 MM)
Main:
Main:
Thrust Width:
Balance: Internal
1.338" (33.985 MM)
3.542" (89.967 MM)
Rear Seal Diameter:
F201, FE201, FE50, PROBE
Casting Numbers:
Comments:
MFI, 626 TURBO & NON TURBO, 12 VALVE HEAD, MX6 OHC
MAZDA
Engine Model
3.3900" (86.106 MM)
Cyl Bore:
Stroke: 3.7000" (93.980 MM)

2.0055-2.0060" (50.94-50.952 MM)
Rods:
2.3598-2.3604" (59.939-59.954 MM)
Main:
Main:
Comments:
YALE FORKLIFT 2184 CC'S
MAZDA
Year
L3
3&6
@ #3
03-05
3.4449-3.4460" (87.500-87.530 MM)
Cyl Bore:
1.9677-1.9685" (49.980-50.000 MM)

Rods:
2.0464-2.0472" (51.980-52.000 MM)
Main:
Main:
Comments:
DOHC
MAZDA
2.3
140
Stroke: 3.126" (79.4 MM)

2.0462-2.0472" (51.973-51.999 MM)
Rods:
2.2051-2.2059" (56.01-56.03 MM)
Main:
Main:
E89E-AB
Casting Numbers:
Comments:
SOHC, PFI, B2300
MAZDA
2.5
153
MAZDA
2.5
154
98-03
3.7795-3.7810" (95.999-96.037 MM)
Cyl Bore:
94-97
3.7795-3.7825" (95.999-96.076 MM)
B2500
Stroke: 3.402" (86.411 MM)

2.0464-2.0472" (51.979-51.999 MM)
Rods:
2.2051-2.2059" (56.010-56.030 MM)
Main:
Main:
Comments:
MFI, SOHC, B2500 TRUCK, MANUAL TRANSMISSION
Stroke:
Rods:
B2300
Cyl Bore:
154
4.000" (101.6 MM)

2.2485-2.2491" (57.112-57.127 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
2.7485-2.7491" (69.812-69.827 MM)
Main:
Main Fillet:
Main:
Thrust Width:
31315961, 31315962, 31315963, 31316351, 31316353, 31318352
Casting Numbers:
Comments:
XA DIESEL, YALE FORKLIFTS, MARKETED/PERKINS
334
XA
3.5010-3.5020" (88.925-88.951 MM)
.126-.142" (3.2-3.607 MM)
1.3806" (35.067 MM)
.146-.157" (3.708-3.988 MM)
1.4545"

Make
Liter
CID
Vin
Model
Year
MAZDA
4 Cylinders
2.6
MAZDA
156
G54
Stroke: 3.860" (98.044 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
G54
Casting Numbers:
Comments:
B2600
86-88
Thrust Width:
2.6
159
@ #3
B2600
MAZDA
2.7
MAZDA
3.0
3.5
4.6
1.032 @ #3
HA
72-00
T3000
211
81-94
SL
278
84-00
TM
TM
6 Cylinders
K8D
Stroke: 2.740" (69.596 MM)

1.8872-1.8880" (47.935-47.955 MM)
Rods:
2.4382-2.4392" (61.93-61.956 MM)
Main:
Main:
DOHC, EFI, MX-3, 24 VALVE
Comments:
2.3
MX-3
KJ
MILLENIA
Stroke: 2.9213" (74.201 MM)

Cyl Bore:
2.0843-2.0848" (52.941-52.954 MM)
Rods:
2.4385-2.4392" (61.938-61.956 MM)
Main:
Main:
Comments:
DOHC, MFI, MILLENIA, MILLER CYCLE OR SUPERCHARGED
2.5
153
Stroke: 2.921" (74.193 MM)

2.0843-2.0848" (52.941-52.954 MM)
Rods:
2.4385-2.4392" (61.938-61.956 MM)
Main:
Main:
Balance: Internal
1.6653" (42.300 MM)
2.9527" (75.000 MM)
Rear Seal Diameter:
KL, KL01, KLC7
Casting Numbers:
Comments:
DOHC, MX-6, 626, SOLID LIFTERS 1999 UP
92-95
2.949" (74.905 MM)
Cyl Bore:
137
KL
94-99
3.1615-3.1622" (80.302-80.32 MM)
626
93-00
Cyl Bore:
3.3268-3.3276" (84.501-84.521 MM)
Thrust Width:
1.2047" @ #3
335
SL
4.2915-4.2926" (109.005-109.031 MM)
Cyl Bore:
112
HA
3.9370-93.9380" (100.000-100.025 MM)
MAZDA
1.8
XB
3.7410-3.7420" (95.021-95.047 MM)
Cyl Bore:
Stroke: 4.803" (122.000 MM)

2.5192-2.5197" (63.987-64.000 MM)
Rods:
1,2,4,5 3.1094-3.1102" (78.980-79.000 MM)
Main 1:
3 3.1084-3.1092" (78.954-78.974 MM)
Main:
Main 2:
Comments:
DIESEL, YALE TRUCK
G6
3.6220" (92.000 MM)
Cyl Bore:
Stroke: 4.3307" (110.000 MM)

2.4060-2.4065" (61.112-61.125 MM)
Rods:
2.9844-2.9852" (75.805-75.825 MM)
Main:
Main:
Comments:
TURBO DIESEL
MAZDA
Thrust Width:
XB
Stroke: 4.1359" (105.000 MM)

2.4060-2.4065" (61.112-61.125 MM)
Rods:
2.9847-2.9852" (75.811-75.824 MM)
Main:
Main:
Comments:
DIESEL
MAZDA
3.6221-3.6229" (92.001-92.022 MM)
Cyl Bore:
182
89-95
Cyl Bore:
165
Stroke: 4.000" (101.600 MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
Comments:
DIESEL
MAZDA
G54
MMC, 2BC, MPV, B2600, PICKUP
MAZDA
MAZDA
(cont.)
3.590" (91.186 MM)
Cyl Bore:
Stroke: 3.858" (97.993 MM)

2.0055-2.0061" (50.94-50.955 MM)
Rods:
2.3598-2.3602" (59.939-59.949 MM)
Main:
Main:
Balance: Internal
G60-1
Casting Numbers:
Comments:
MFI, MPV, B2600I, 12 VALVE HEAD, G ENGINE
MAZDA
Engine Model

Make
Liter
CID
Vin
Model
Year
MAZDA
6 Cylinders
3.0
MAZDA
180
JE
Stroke: 3.047" (77.394 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4385-2.4392" (61.938-61.956 MM)
Main:
Main:
JE
Casting Numbers:
Comments:
929
88-89
@ #4
Thrust Width:
SOHC, MFI, 929, MPV
3.0
MAZDA
180
JE
3.0
MAZDA
180
3.0
MAZDA
3.0
Thrust Width:
.953 @ #4
929
4.0
4.0
182
B3000
182
244
94-98
3.504" (89.002 MM)
Cyl Bore:
TRIBUTE
-03
DURATECH
3.2440-3.2452" (82.398-82.428 MM)
B4000
90-98
Cyl Bore:
3.9535" (100.400 MM)
Thrust Width:
1.039-1.041 @#2
247
ZB
Stroke: 4.000" (101.600 MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
Comments:
DIESEL
80-04
ZB
3.623-3.624" (92.024-92.050 MM)
Cyl Bore:
MERCEDES BENZ
MERCEDES BENZ
@ #4
Thrust Width:
Stroke: 3.307" (83.998 MM)

2.1252-2.1260" (53.98-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
2.376" (60.35 MM)
Rear Seal Diameter:
90TM-AB, 96TM-AA, X
Casting Numbers:
Comments:
CAM IN BLOCK FORD, MFI, NAVAJO, B4000
MAZDA
90-97
3.5433-3.5442" (90.-90.023 MM)
Stroke: 3.129" (79.477 MM)

Cyl Bore:
1.9674-1.9681" (49.972-49.990 MM)
Rods:
2.4791-2.4800" (62.969-62.992 MM)
Main:
Main:
E6AE-A, E6AE-AH, E6AE-B, E6AE-C, E6AE-W
Casting Numbers:
Comments:
DOHC, SFI, TRIBUTE
MAZDA
90-96
3.543" (89.992 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

2.1253-2.1261" (53.983-54.003 MM)
Rods:
2.5190-2.5198" (63.983-64.003 MM)
Main:
Main:
Comments:
MPFI, B3000
MAZDA
929
Cyl Bore:
JE
Stroke: 3.047" (77.394 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
2.4385-2.4392" (61.938-61.956 MM)
Main:
Main:
JE
Casting Numbers:
Comments:
SOHC, MFI, 929, MPV
4 Cylinders
1.7
103
Stroke: 3.9370" (100. MM)

1.9661-1.9669" (49.939-49.959 MM)
Rods:
#1 2.1630-2.1638" (54.94-54.961 MM)
Main:
Main:
R6810310001
Casting Numbers:
M136
53-61
Cyl Bore:
Rod Fillet:
2.8947" (73.525 MM)

.094" (2.388 MM)
Thrust Width:
1.4627
M136
M136
MERCEDES BENZ
Stroke:
Rods:
(cont.)
3.5433-3.5442" (90.-90.023 MM)
Cyl Bore:
Stroke: 3.047" (77.394 MM)

2.0842-2.0848" (52.939-52.954 MM)
Rods:
#1 2.4385-2.4392" (61.938-61.956 MM)
Main:
Main:
2.953" (75.006 MM)
Rear Seal Diameter:
020201A1, 929
Casting Numbers:
Comments:
DOHC, MFI, MPV, 929
Comments:
Engine Model
1.8
3.9370" (100. MM)

1.9661-1.9669" (49.939-49.959 MM)
2.1629-2.1637" (54.938-54.958 MM)

Main:
External
Main:
Balance:
Comments:
OM636, 180D DIESEL
108
180D
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
336
75-76
2.9528" (75.001 MM)
.098-.118" (2.489-2.997 MM)
1.3386-1.3425" (34.-34.1 MM)
.098-.118
OM636

Make
Liter
CID
Vin
Model
Year
MERCEDES BENZ
MERCEDES BENZ
4 Cylinders
1.8
108
Stroke: 3.9370" (100. MM)

1.9661-1.9669" (49.939-49.959 MM)
Rods:
#1 2.1630-2.1638" (54.94-54.961 MM)
Main:
Main:
R6E10310001
Casting Numbers:
MERCEDES BENZ
1.9
MERCEDES BENZ
2.0
MERCEDES BENZ
2.2
2.2
2.2
2.3
2.3
MERCEDES BENZ
2.3
68-73
Cyl Bore:
3.4252" (87. MM)
Cyl Bore:
3.430" (87.122 MM)
84-85
C220
140
190E
Thrust Width:
190E
Thrust Width:
190E
102.9
@ CENTER
86-90
102
190E
@ CENTER
91-95
102
Cyl Bore:
3.760" (95.504 MM)
Rod Width:
1.1024-1.1037" (28.001-28.034 MM)
Thrust Width:
1.122-1.123 @#3
140
Stroke: 3.307" (83.998 MM)

2.0455-2.0459" (51.956-51.966 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
Comments:
230, OHC, ENG DESIGNATOR #11595154
84-88
3.760" (95.504 MM)
Cyl Bore:
140
M111
3.760" (95.504 MM)
Cyl Bore:
DOHC
OM601
@ CENTER
94-98
140
OM615
3.540" (89.916 MM)
Cyl Bore:
2.2815-2.2821" (57.95-57.965 MM)

Main:
Main:
Comments:
190E 102 ENGINE
2.3
1.182
Thrust Width:
3.110" (78.994 MM)

1.8880-1.8883" (47.955-47.963 MM)
MERCEDES BENZ
Thrust Width:
615.912
Stroke: 3.160" (80.264 MM)

1.8870-1.8880" (47.93-47.955 MM)
Rods:
#1 2.2810-2.2820" (57.937-57.963 MM)
Main:
Main:
1020310101
Casting Numbers:
Comments:
DOHC, 190E GAS, MODEL 102.983
Stroke:
Rods:
3.425" (86.995 MM)
134
134
121.9
64-68
Cyl Bore:
134
Stroke: 3.160" (80.264 MM)

1.8870-1.8880" (47.93-47.955 MM)
Rods:
#1 2.2810-2.2820" (57.937-57.963 MM)
Main:
Main:
1020310101
Casting Numbers:
Comments:
SOHC, 190E GAS, MODEL 102.985, 102.961
MERCEDES BENZ
59-62
3.346" (84.988 MM)
200D
Stroke: 3.410" (86.614 MM)

2.2814-2.2820" (57.948-57.963 MM)
Main:
Main:
Comments:
GAS, SFI
MERCEDES BENZ
1.4627
121
Stroke: 3.640" (92.456 MM)

1.8878-1.8883" (47.95-47.963 MM)
Rods:
2.2815-2.2820" (57.95-57.963 MM)
Main:
Main:
Comments:
DIESEL
MERCEDES BENZ
Thrust Width:
190SL
Stroke: 3.6438" (92.553 MM)

2.0455-2.0458" (51.956-51.963 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
Comments:
DIESEL 615.912
MERCEDES BENZ
2.9528" (75.001 MM)

.094" (2.388 MM)
Cyl Bore:
Stroke: 3.283" (83.388 MM)

2.0455-2.0459" (51.956-51.966 MM)
Rods:
2.7535-2.7543" (69.939-69.959 MM)
Main:
Main:
Comments:
200D DIESEL
(cont.)
53-61
Cyl Bore:
Rod Fillet:
116
Stroke: 3.307" (83.998 MM)

2.0455-2.0459" (51.956-51.966 MM)
Rods:
2.7435-2.7443" (69.684-69.705 MM)
Main:
Main:
Comments:
121.9 SERIES, 190SL
Engine Model
230
Cyl Bore:
337
74-78
3.690" (93.726 MM)
M115

Make
Liter
CID
Vin
Model
Year
MERCEDES BENZ
MERCEDES BENZ
4 Cylinders
2.4
146
OM616
Stroke: 3.638" (92.405 MM)

2.0454-2.0458" (51.953-51.963 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
DIESEL, 240D, 616.912
Comments:
MERCEDES BENZ
2.4
2.4
4.0
147
4.3
240D
242
OM364A
MBE900
97-02
MBE900
Cyl Bore:
4.0151-4.0163" (101.985-102.015 MM)
Thrust Width:
1.2205-1.2229" (31.000-31.0632 mm)
5 Cylinders
2.5
152
Stroke: 3.300" (83.82 MM)

1.8878-1.8883" (47.95-47.963 MM)
Rods:
2.2815-2.2820" (57.95-57.963 MM)
Main:
Main:
190D DIESEL
Comments:
2.5
3.0
190D
Thrust Width:
152
87-88
3.430" (87.122 MM)
Cyl Bore:
OM602
Stroke: 3.307" (83.998 MM)

1.8878-1.8883" (47.95-47.963 MM)
Rods:
2.2815-2.2820" (57.95-57.963 MM)
Main:
Main:
Comments:
DIESEL, TURBO DIESEL
MERCEDES BENZ
616
3.8383-3.8389" (97.492-97.508 MM)

.1575" (4.000 MM)
.1575" (4.000 MM)
MERCEDES BENZ
MERCEDES BENZ
80-85
OM364A
Cyl Bore:
Rod Fillet:
Main Fillet:
259
616
3.5787" (90.899 MM)
Cyl Bore:
Stroke: 5.110" (130.000 MM)

2.7557-2.7565" (69.995-70.015 MM)
Rods:
3.3854-3.3862" (85.990-86.010 MM)
Main:
Main:
Comments:
TURBO, DIESEL, DIR INJ, USED BY DDC 2004 UP
MERCEDES BENZ
73-79
3.5827" (91.001 MM)
D(2)
Stroke: 5.2362" (132.999 MM)

2.3620-2.3628" (59.995-60.015 MM)
Rods:
3.4642-3.4650" (87.991-88.011 MM)
Main:
5.1182-5.1231" (130.000-130.127 MM)
Main:Seal Diameter:
Rear
Comments:
DIESEL
MERCEDES BENZ
@ CENTER
240D
Cyl Bore:
Stroke: 3.622" (91.999 MM)

2.0455-2.0459" (51.956-51.966 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
Comments:
240D, 90.9MM BORE 616.912 ENGINE
MERCEDES BENZ
83-84
Thrust Width:
147
(cont.)
3.5787" (90.899 MM)
Cyl Bore:
Stroke: 3.622" (91.999 MM)

2.0455-2.0459" (51.956-51.966 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
Comments:
240D, 616.912
MERCEDES BENZ
240D
Engine Model
@ CENTER
86-93
3.425" (86.995 MM)
Cyl Bore:
Thrust Width:
183
300D
@ CENTER
81-85
617.9
3.580" (90.932 MM)

Stroke: 3.640" (92.456 MM)
Cyl Bore:
2.0459-2.0463" (51.966-51.976 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
@ CENTER
Main:
Thrust Width:
Comments:
DIESEL, 300D, 300CD&TURBO,617.951 & 617.952 ENGINE USES FLG BEARING
MERCEDES BENZ
3.0
183
300D
Stroke: 3.640" (92.456 MM)

2.0459-2.0463" (51.966-51.976 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
Comments:
DIESEL, 300D, 300CD, TURBO USES FLG BEARING
MERCEDES BENZ
3.0
183
Stroke: 3.622" (91.999 MM)

2.0455-2.0459" (51.956-51.966 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
Comments:
300SD, 617.950 ENGINE, TURBO DIESEL
Thrust Width:
SD
300SD
Cyl Bore:
338
82-87
OM617
3.580" (90.932 MM)
Cyl Bore:
@ CENTER
76-80
3.5827" (91.001 MM)
OM617

Make
Liter
CID
Vin
Model
Year
MERCEDES BENZ
MERCEDES BENZ
5 Cylinders
3.0
183
Stroke: 3.6380" (92.405 MM)

2.0450-2.0458" (51.943-51.963 MM)
Rods:
2.7541-2.7545" (69.954-69.964 MM)
Main:
Main:
6170310501
Casting Numbers:
Comments:
(cont.)
86-89
3.5787" (90.899 MM)
Cyl Bore:
NON TURBO DIESEL
MERCEDES BENZ
9.7
589
OM355
Stroke: 5.906" (150.012 MM)

3.0701-3.0709" (77.981-78.001 MM)
Rods:
3.7394-3.7402" (94.981-95.001 MM)
Main:
Main:
Comments:
OM355 DIESEL, CODE 345.947, DIR INJ
MERCEDES BENZ
9.8
MERCEDES BENZ
10.0
OM355
Cyl Bore:
5.039" (127.991 MM)
Thrust Width:
2.559-2.563 @#4
599
OM355
Stroke: 5.906" (150.012 MM)

3.0701-3.0709" (77.981-78.001 MM)
Rods:
3.7394-3.7402" (94.981-95.001 MM)
Main:
Main:
Comments:
OM355 DIESEL, CODE 345.900, DIR INJ
Stroke:
Rods:
Engine Model
OM355
Cyl Bore:
5.080" (129.032 MM)
Thrust Width:
2.559-2.563 @#4
608
OM429-LA
6.100" (154.94 MM)

3.5425-3.5433" (89.98-90. MM)
83-90
Cyl Bore:
5.040" (128.016 MM)
Rod Width:
1.815-1.835" (46.101-46.609 MM)
#1 4.0937-4.0945" (103.98-104. MM)

Main:
Main:
Comments:
LPS1525 DIESEL TRUCK
MERCEDES BENZ
MERCEDES BENZ
6 Cylinders
2.2
140
180
Stroke: 2.866" (72.796 MM)

1.8874-1.8882*" (47.94-47.96 MM)
Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main: Numbers:
1800311401
Casting
Comments:
220, 250, M180 ENGINE * BEFORE 12 OF 1966 = 1.8880-1.8884"

CRANKSHAFT, SAME STROKE
MERCEDES BENZ
2.3
140
MERCEDES BENZ
2.3
M180
THIS IS THE OLDER 220
180
230
64-69
M180.945
3.2185" (81.75 MM)

.098-.118" (2.489-2.997 MM)
.098-.118" (2.489-2.997 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
230, 230S * BEFORE 12 OF 1966 = 1.8880-1.8884"

STROKE
64-69
3.1496" (80.00 MM)
.098-118" (2.489-2997.2 MM)
.098-.118
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 2.866" (72.796 MM)

1.8874-1.8882" (47.94-47.96 MM) *
Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main: Numbers:
R1800311401
Casting
Comments:
220
THIS IS THE OLDER 220 CRANKSHAFT, SAME
141
230SL
63-67
M127
3.2283" (81.999 MM)
Cyl Bore:
1.8880-1.8884" (47.955-47.965 MM)

Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main:
Comments:
230SL GAS
MERCEDES BENZ
2.5
152
Stroke: 3.100" (78.74 MM)

1.8894-1.8898" (47.991-48.001 MM)
Rods:
2.3622-2.3626" (60.-60.01 MM)
Main:
Main:
Comments:
250, 0HC, 2496CC
MERCEDES BENZ
2.5
114
250
152
67-72
3.2283" (81.999 MM)
Cyl Bore:
250SE
65-68
3.2283" (81.999 MM)
Cyl Bore:
1.8874-1.8882" (47.94-47.96 MM)

Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main:
Comments:
250SE, 129 ENGINE, OHC
MERCEDES BENZ
2.6
Stroke: 3.160" (80.264 MM)

1.8870-1.8880" (47.93-47.955 MM)
Rods:
2.2810-2.2820" (57.937-57.963 MM)
Main:
Main:
Comments:
190E, 260E, 300E
159
190E
86-91
Cyl Bore:
3.260" (82.804 MM)
Thrust Width:
.9646-.9654 @#5
339
129

Make
Liter
CID
Vin
Model
Year
MERCEDES BENZ
MERCEDES BENZ
6 Cylinders
2.7
167
280SE
Stroke: 3.110" (78.994 MM)

1.8880-1.8884" (47.955-47.965 MM)
Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main:
280 SE, DOHC, M110 ENGINE
Comments:
MERCEDES BENZ
2.8
170
2.8
170
280SE
2.8
171
3.0
3.0
3.0
3.2
3.5
5.7
C280
SDL
93-97
86-92
86-87
@ CENTER
83-87
0M603
3.5787" (90.899 MM)
Cyl Bore:
300E
92-95
Cyl Bore:
3.539" (89.891 MM)
Cyl Bore:
3.5039" (88.999 MM)
211
87-93
352
OM603
3.425" (86.995 MM)
183
346
103.9
@ #5
300SDL
300E
104.9
3.4842" (88.499 MM)
Thrust Width:
195
M130
3.539" (89.891 MM)
Cyl Bore:
Stroke: 3.638" (92.405 MM)

1.8878-1.8884" (47.95-47.965 MM)
Rods:
2.2815-2.2821" (57.95-57.965 MM)
Main:
Main:
Comments:
TURBO DIESEL, 603.971, C
MERCEDES BENZ
1.137
300E
Stroke: 3.307" (83.998 MM)

1.8878-1.88884" ( 47.950-47.965 MM)
Rods:
2.2815-2.2821" (57.950-57.965 MM)
Main:
Main:
Comments:
DOHC 300E, 300SE, E320:ID104.992, S320:ID104.994
MERCEDES BENZ
Thrust Width:
Thrust Width:
183
M110
74-81
Cyl Bore:
Stroke: 3.307" (83.998 MM)

1.8878-1.8884" (47.95-47.965 MM)
Rods:
2.2815-2.2821" (57.95-57.965 MM)
Main:
Main:
Comments:
TURBO DIESEL
MERCEDES BENZ
3.3858" (85.999 MM)
183
Stroke: 3.307" (83.998 MM)

1.8878-1.8883" (47.95-47.963 MM)
Rods:
2.2815-2.2820" (57.95-57.963 MM)
Main:
Main:
Comments:
300SDL TURBO DIESEL, 603.961
MERCEDES BENZ
Cyl Bore:
Cyl Bore:
Stroke: 3.161" (80.289 MM)

1.8870-1.8880" (47.93-47.955 MM)
Rods:
#1 2.2810-2.2820" (57.937-57.963 MM)
Main:
Main:
1033105
Casting Numbers:
Comments:
300E, 103.983
MERCEDES BENZ
3.4060" (86.512 MM)

.098-.118" (2.489-2.997 MM)
.098-.118" (2.489-2.997 MM)
300E
Stroke: 2.894" (73.508 MM)

1.8880- (47.955 - 47.965 mm)
Rods:
2.2819-2.2821" (57.960 - 57.965 mm)
Main:
Main:
Comments:
C280, DOHC, ENGINE ID:104.941, 104.942
MERCEDES BENZ
67-72
Cyl Bore:
Rod Fillet:
Main Fillet:
M110
Stroke: 3.102" (78.791 MM)

1.8880-1.8884" (47.955-47.965 MM)
Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main:
Comments:
DOHC
MERCEDES BENZ
75-81
(cont.)
3.386" (86.004 MM)
Cyl Bore:
Stroke: 3.1020" (78.791 MM)

1.8880-1.8884" (47.955-47.965 MM)
Rods:
2.3604-2.3608" (59.954-59.964 MM)
Main:
Main:
Comments:
280 SE, SL, M130 ENGINE
MERCEDES BENZ
Engine Model
OM352
104.9
OM603
OM352
3.8184-3.8192" (96.987-97.008 MM)

Stroke: 5.0393" (127.998 MM)
Cyl Bore:
2.3618-2.3628" (59.99-60.015 MM)
.110-.172" (2.794-4.369 MM)
Rods:
Rod Fillet:
3.4642-3.4650" (87.991-88.011 MM)
.110-.172" (2.794-4.369 MM)
Main:
Main Fillet:
1.2520 @ #4
Main:
Thrust Width:
OM352
Casting Numbers:
Comments:
DIESEL, MODEL OM352 THRUST BRG LENGTH:1.252, C/W TORQ:22# +90 +20
340

Make
Liter
CID
Vin
Model
Year
MERCEDES BENZ
MERCEDES BENZ
6 Cylinders
5.7
346
(cont.)
OM352A
Stroke: 5.0393" (127.998 MM)

2.3618-2.3628" (59.99-60.015 MM)
Rods:
3.4642-3.4650" (87.991-88.011 MM)
Main:
Main:
3528401
Casting Numbers:
Comments:
Engine Model
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
OM352A
3.8184-3.8192" (96.987-97.008 MM)

.110-.172" (2.794-4.369 MM)
.110-.172" (2.794-4.369 MM)
@ #4
MODEL OM352A DIESEL THRUST BRG LNGTH:1.252
MERCEDES BENZ
6.0
366
OM366
Stroke: 5.236" (132.994 MM)

2.3620-2.3627" (59.995-60.013 MM)
Rods:
3.4642-3.4649" (87.991-88.008 MM)
Main:
Main:
Comments:
OM-366 DIESEL
MERCEDES BENZ
11.0
669
87-94
OM366
3.8386" (97.5 MM)
Cyl Bore:
OM 421
5.039" (127.991 MM)

Stroke: 5.591" (142.011 MM)
Cyl Bore:
3.5425-3.5433" (89.98-90. MM)
Rods:
4.0936-4.0944" (103.977-103.998 MM)
Main:
Main:
Comments:
DIESEL INDUSTRIAL & V8 442 CRANKSHAFT COUNTERWEIGHT BOLT TORQUE 140-160 NM + 90-100
ADDITIONAL TURN
MERCEDES BENZ
MERCEDES BENZ
8 Cylinders
3.8
233
380SEL
Stroke: 2.8270" (71.806 MM)

2.0452-2.0460" (51.948-51.968 MM)
Rods:
#1 2.5179-2.5185" (63.955-63.97 MM)
Main:
Main:
116.961.12003603 GAS, 380SEL
Comments:
MERCEDES BENZ
3.8
234
380SE
Stroke: 3.106" (78.892 MM)

1.8888-1.8898" (47.976-48.001 MM) *
Rods:
#1 2.5170-2.5180" (63.932-63.957 MM)
Main:
Main:
Comments:
GAS, 380SE & SL * ALSO 2.030-2.031
MERCEDES BENZ
4.2
256
E420
MERCEDES BENZ
4.2
MERCEDES BENZ
4.5
420SEL
276
5.0
MERCEDES BENZ
5.0
Stroke: 3.350" (85.09 MM)

1.8879-1.8883" (47.953-47.963 MM)
Rods:
2.5179-2.5183" (63.955-63.965 MM)
Main:
Main:
Comments:
E500 SL500 & SEL500
86-93
76-80
Cyl Bore:
3.620" (91.948 MM)
Thrust Width:
1.062" (26.975 MM)
303
500SEL
Cyl Bore:
305
93-94
E500
341
116.965
84-91
M117
M117.963
3.800" (96.52 MM)
500SEL
Cyl Bore:
119.975
3.622" (91.999 MM)
450SEL
Stroke: 3.350" (85.09 MM)

2.0310" (51.587 MM)
Rods:
ALL 2.5170-2.5180" (63.932-63.957 MM)
Main:
Main:
1170912101
Casting Numbers:
Comments:
M117.963, GAS, 500SEL&SEC
M116.960
3.6219-3.6231" (91.996-92.027 MM)
Cyl Bore:
Stroke: 3.350" (85.09 MM)

2.0451-2.0459" (51.946-51.966 MM)
Rods:
2.5179-2.5183" (63.955-63.965 MM)
Main:
Main:
11798512040439
Casting Numbers:
Comments:
450 SEL, OHC GAS M117.985
MERCEDES BENZ
82-85
400SEL
Cyl Bore:
256
Stroke: 3.106" (78.892 MM)

2.0310" (51.587 MM)
Rods:
2.5170-2.5180" (63.932-63.957 MM)
Main:
Main:
Comments:
EFI, 420SEL, 116.965 ENGINE
116
3.465" (88.011 MM)
Cyl Bore:
Stroke: 3.106" (78.892 MM)

2.0310" (51.587 MM)
Rods:
2.5170-2.5180" (63.932-63.957 MM)
Main:
Main:
Comments:
LH-SFI, E420, 400 SEL, 119.975,S420 ENG ID 119.971
79-80
3.6220" (91.999 MM)
Cyl Bore:
92-99
3.800" (96.52 MM)
119.974

Make
Liter
CID
Vin
Model
Year
MERCEDES BENZ
MERCEDES BENZ
8 Cylinders
5.6
338
117
Stroke: 3.732" (94.793 MM)

1.8876-1.8884" (47.945-47.965 MM)
Rods:
2.5179-2.5183" (63.955-63.965 MM)
Main:
Main:
3.934" (99.924 MM)
Rear Seal Diameter:
R117031-27
Casting Numbers:
Comments:
560
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
86-89
3.800" (96.52 MM)
.109" (2.769 MM)
.109" (2.769 MM)
1.0645
560 CAR SMALL ROD JOURNAL
MERCEDES BENZ
5.6
338
M117
Stroke: 3.730" (94.742 MM)

2.0315-2.0322" (51.6-51.618 MM)
Rods:
2.5179-2.5183" (63.955-63.965 MM)
Main:
Main:
3.934" (99.924 MM)
Rear Seal Diameter:
R117031-27
Casting Numbers:
Comments:
560 CAR LARGE ROD THROW
560
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
88-91
3.800" (96.52 MM)
.109" (2.769 MM)
.109" (2.769 MM)
1.0645
MERCRUISER
MERCRUISER
4 Cylinders
2.3
140
85-95
Stroke: 3.126" (79.4 MM)

2.0462-2.0472" (51.973-51.999 MM)
Rods:
2.3982-2.3990" (60.914-60.935 MM)
Main:
Main:
120 HP & 128 HP, FORD SOHC
Comments:
MERCRUISER
2.5
153
3.0
181
3.780" (96.012 MM)
Cyl Bore:
3.8750" (98.425 MM)
Thrust Width:
1.015 @ #5
IND
Stroke: 3.250" (82.55 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
3793080, 3793082
Casting Numbers:
Comments:
110 HP & 120 HP, GM
MERCRUISER
Cyl Bore:
62-80
IND
74-93
Stroke: 3.600" (91.44 MM)

Cyl Bore:
2.0990-2.1000" (53.315-53.34 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Thrust Width:
2.430-2.432" (61.722-61.772 MM)
Rear Seal Diameter:
14096, 14096624, N3937, N393775, N3941352
Casting Numbers:
Comments:
MERCRUISER, MARINE & INDUSTRIAL, GM
MERCRUISER
3.0
MERCRUISER
3.7
224
Stroke: 3.750" (95.25 MM)

2.4979-2.4989" (63.447-63.472 MM)
Rods:
2.7472-2.7482" (69.779-69.804 MM)
Main:
Main:
Balance: Internal
3.748-3.752" (95.199-95.301 MM)
Rear Seal Diameter:
1074, 1133, 2593
Casting Numbers:
Comments:
MARINE,470,MERCRUISER 165,170,180,190,488
130 HP
1.014 @ #5
94-04
Cyl Bore:
4.000" (101.600 MM)
Thrust Width:
1.014" (25.756 MM) @ #5
MIE
110 HP
4.000" (101.6 MM)
181
Stroke: 3.600" (91.440 MM)

2.0990-2.1000" (53.315-53.340 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Balance: Internal
3.7385-3.7390" (94.957-94.970 MM)
Rear Seal Diameter:
Comments:
2 BBL CARB
120 HP
MIE 470
140 HP
165 HP
Cyl Bore:
4.3602-4.3609" (110.749-110.767 MM)
Thrust Width:
1.124-1.128" @ #3
342

Make
Liter
CID
Vin
Model
Year
MERCRUISER
MERCRUISER
6 Cylinders
4.1
250
MIE
Stroke: 3.531" (89.687 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
3876802, 460407
Casting Numbers:
Comments:
Engine Model
66-75
Cyl Bore:
3.875" (98.425 MM)
Thrust Width:
1.013 @ #7
160 HP
MIE = INBOARD INLINE SIX CYL, 160 HP, 165 HP, GM
MERCRUISER
4.3
262
ALPHA
Stroke: 3.480" (88.400 MM)

Cyl Bore:
2.2487-2.2498" (57.117-57.145 MM)
Rods:
#1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
#2-3 2.4481-2.4490" (62.182-62.205 MM)
Main:
Main 2:
Thrust Width:
#4 2.4479-2.4488" (62.177-62.200 MM)
Main 3:
Balance: External
3.736" (94.894 MM)
Rear Seal Diameter:
Comments:
4.3L & 4.3L X, 4.3LX GEN+, MAGNUM EFI GEN+ ALSO
MERCRUISER
4.3
262
91-05
1.718" @ #4
MCM
Stroke: 3.480" (88.392 MM)

2.0988-2.0998" (53.31-53.335 MM)
Rods:
1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
2 & 3 2.4481-2.4490" (62.182-62.205 MM)
Main:
Main 2:
4 2.4479-2.4488" (62.177-62.2 MM)
Main 3:
Comments:
MCM = STERNDRIVE, 175, 185 HP & 205 HP, GM
86-90
8 Cylinders
5.0
305
MIE
Stroke: 3.4803" (88.400 MM)

2.0988-2.0998" (53.309-53.335 MM)
Rods:
1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
2-4 2.4481-2.4490" (62.182-62.205 MM)
Main 2:
5 2.4479-2.4488" (62.177-62.199 MM)
Main 3:
MIE = INBOARD, 228 HP, 230 HP, 255 HP, GM
Comments:
MERCRUISER
175 HP
4.000" (101.6 MM)
Cyl Bore:
MERCRUISER
MERCRUISER
ALPHA / GEN +
4.0007-4.0017" (101.617-101.643 MM)
5.0
305
MIE 228
Cyl Bore:
ZA,MH
228 HP
3.7350-3.7385" (94.869-94.958 MM)
99-02
220 & 230 HP
3.7350-3.7384" (94.881-94.958 MM)

Stroke: 3.480" (88.400 MM)
Cyl Bore:
2.0977-2.0997" (53.284-53.334 MM)
Rods:
1 2.4483-2.4492" (62.189-62.212 MM)
Main 1:
2,3,4 2.4480-2.4490" (62.181-62.207 MM)
1.724" @ #5
Main:
Main 2:
Thrust Width:
5 2.4479-2.4490" (62.177-62.207 MM)
Main 3:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
Comments:
MPI, MCM,ALPHA BRAVO,220HP ZA, & EFI 230HP MH THRUST BRG LENGTH 1.7259-1.7318"
MERCRUISER
5.7
350
MH,MK
99-02
250,260,300 HP
4.000-4.0010" (101.618-101.643 MM)

Stroke: 3.480" (88.400 MM)
Cyl Bore:
2.0977-2.0997" (53.284-53.334 MM)
Rods:
1 2.4483-2.4492" (62.189-62.212 MM)
Main 1:
2,3,4 2.4480-2.4490" (62.181-62.207 MM)
1.724" @ #5
Main:
Main 2:
Thrust Width:
5 2.4479-2.4490" (62.177-62.207 MM)
Main 3:
Balance: External
3.740-3.741" (94.996-95.021 MM)
Rear Seal Diameter:
Comments:
MCM, ALPHA BRAVO,250HP,&EFI 260HP,& MAG MPI 300HP THRUST BRG LENGTH 1.7259-1.7318"
MERCRUISER
6.2
377
MHA
00-03
Stroke: 3.7500" (95.250 MM)

Cyl Bore:
2.0977-2.0997" (53.284-53.334 MM)
Rods:
FRONT 2.4483-2.4492" (62.187-62.210 MM)
Main 1:
OTHER 2.4480-2.4490" (62.179-62.205 MM)
Main:
Main 2:
Thrust Width:
Balance: External
3.7400-3.7410" (94.996-95.021 MM)
Rear Seal Diameter:
Comments:
MX, MXMPI, BLACK SCORPION #OL68003 AND ABOVE
343
340 HP
4.0000-4.0010" (101.618-101.643 MM)
1.7240" @ #5

Make
Liter
CID
Vin
Model
Year
MERCRUISER
MERCRUISER
8 Cylinders
7.4
454
MCM
86-93
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.1985-2.1995" (55.841-55.867 MM)
Rods:
Rod Fillet:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
4.3320" (110.032 MM)
Rear Seal Diameter:
GEN IV, 325, 330, 340, 390 HP THRUST BEARING LENGTH 1.805-1.809"
Comments:
MERCRUISER
7.4
454
MERCRUISER
7.4
(cont.)
390 HP
4.2500-4.2507" (107.950-107.968 MM)

.109" (2.768 MM)
.109" (2.768 MM)
1.815" @ #5
XF
90-94
Stroke: 4.000" (101.600 MM)

Cyl Bore:
2.1985-2.1995" (55.842-55.867 MM)
Rods:
ALL 2.7482-2.7489" (69.805-69.822 MM)
Main:
Main:
Thrust Width:
4.3320" (110.032 MM)
Rear Seal Diameter:
Comments:
GEN V, MCM 425 HP, HI-PERFORMANCE PRODUCTION
Engine Model
425 HP
4.2500-4.2507" (107.950-107.968 MM)
@ #3
454
91-94
525 HP SC
4.2500-4.2507" (107.950-107.968 MM)

Stroke: 4.000" (101.600 MM)
Cyl Bore:
2.1985-2.1995" (55.842-55.867 MM)
Rods:
2.7482-2.7489" (69.805-69.822 MM)
Main:
Main:
Comments:
GEN IV (VIN XF) & GENV (VIN XA OR UA),MCM 525HP SC FORGED STEEL CRANK
MERCRUISER
7.4
454
UA
-93
Stroke: 4.000" (101.600 MM)

Cyl Bore:
2.1985-2.1995" (55.842-55.867 MM)
Rods:
Rod Fillet:
2.7482-2.7489" (69.805-69.822 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
4.3320" (110.032 MM)
Rear Seal Diameter:
Comments:
GEN V, MCM 425 & 450 HP, HI-PERFORMANCE FORGED STEEL CRANK.
MERCRUISER
7.4
454
MCM
Stroke: 4.000" (101.6 MM)

2.1985-2.1995" (55.841-55.867 MM)
Rods:
1-5 2.7482-2.7489" (69.804-69.822 MM)
Main:
4.3320" (110.032 MM)
Main:Seal Diameter:
Rear
Comments:
GEN V, XF OD 725500 425 HP, UA OD 213293 450 HP
MERCRUISER
8.2
502
8.2
502
Main Fillet:
HJ
Stroke: 4.000" (101.6 MM)

2.1990-2.1996" (55.855-55.87 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
4.3320" (110.032 MM)
Main:
Rear Seal Diameter:
14097044
Casting Numbers:
Comments:
MCM = STERNDRIVE, 470 HP, EFI, GM, GEN V
MERCRUISER
93-94
Cyl Bore:
Main Fillet:
MCM
450 HP
4.250" (107.95 MM)

MAIN #5 .0024-.0040" (.061-.101 MM)
500 BULLDOG
Cyl Bore:
450 HP
4.2500-4.2507" (107.950-107.968 MM)

.109" (2.768 MM)
.109" (2.768 MM)
1.8150" @ #5
470 HP
4.4655-4.4662" (113.424-113.441 MM)

MAIN #5 .0025-.0038" (.063-.096 MM
-90
465 HP
4.468" (113.480 MM)

Stroke: 4.000" (102.000 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.880 MM)
Rods:
1-4 2.7481-2.7490" (69.802-69.825 MM)
Main 1:
5 2.7476-2.7486" (69.794-69.820 MM)
Main:
Main 2:
Comments:
GEN IV, MCM = STERNDRIVE BRAVO 465HP, CARB 2 PC REAR MAIN SEAL
MERCRUISER
8.2
502
FJ/HJ
90-94
600 HP SC
4.4655-4.4662" (113.424-113.442 MM)

Stroke: 4.000" (101.600 MM)
Cyl Bore:
2.1990-2.2000" (55.855-55.880 MM)
Rods:
2.7482-2.7489" (69.805-69.822 MM)
Main:
@ #3
Main:
Thrust Width:
Comments:
MCM = STERNDRIVE GEN IV & V, 600 HP, SUPERCHARGED FORGED STEEL CRANK, 4 BOLT MAIN BRG
CAPS
MERCRUISER
8.9
540
MCM
85-92
575 HP
4.440-4.442" (112.776-112.826 MM)

Stroke: 4.375" (111.000 MM)
Cyl Bore:
2.1980-2.1990" (55.829-55.855 MM)
Rods:
1-4 2.7480-2.7490" (69.8195-69.8246 MM)
Main 1:
5 2.7450-2.7480" (69.723-69.799 MM)
Main:
Main 2:
Comments:
GEN IV,MCM 575 HP,CARB,SEE NOTES FOR SERIAL # INFO 575 CRANKS ARE FULLY POLISHED FOR
ADDED STRENGTH AND ADDED OIL CLEARANCE.
344

Make
Liter
CID
Vin
Model
Year
MERCRUISER
MERCRUISER
8 Cylinders
8.9
540
MCM
-90
Engine Model
(cont.)
500 HP
4.440-4.442" (112.776-112.826 MM)

Stroke: 4.375" (111.000 MM)
Cyl Bore:
2.1980-2.1990" (55.829-55.855 MM)
Rods:
1-4 2.7480-2.7490" (69.820-69.825 MM)
Main 1:
5 2.7450-2.7480" (69.723-69.799 MM)
Main 2:
GEN IV, MCM = STERNDRIVE 500 HP,CARB, SEE NOTES 2 PC REAR MAIN SEAL
Comments:
MERCRUISER
9.4
572
MCM
91-98
Stroke: 4.504" (114.400 MM)

Cyl Bore:
2.1980-2.1990" (55.829-55.855 MM)
Rods:
#1-4 2.7481-2.7490" (69.802-69.825 MM)
Main 1:
#5 2.7476-2.7486" (69.789-69.814 MM)
Main:
Main 2:
Thrust Width:
Comments:
MCM (STERN DRIVE) 800 SUPER CHGD, SEE NOTES
@ #5
MG
MG
4 Cylinders
0.9
58
MK I, MK II, MIDGE
Stroke: 3.000" (76.2 MM)

Cyl Bore:
1.6254-1.6259" (41.285-41.298 MM)
Rods:
Rod Fillet:
#1 1.7505-1.7510" (44.463-44.475 MM)
Main:
Main:
Thrust Width:
11C-74, 11G-74, 2A717A, 2A-717-A, 2A-829, BE-53-B
Casting Numbers:
Comments:
MG
52-62
9CG
2.480" (62.992 MM)

.125" (3.175 MM)
@ CENTER
948CC, TYPE 9CG, MK I, MK II, MG MIDGET MK I
0.9
58
SPRITE MK I
Stroke: 3.000" (76.200 MM)

Cyl Bore:
1.6254-1.6259" (41.285-41.298 MM)
Rods:
Rod Fillet:
1.7505-1.7510" (44.463-44.475 MM)
Main:
Main:
Thrust Width:
11C-74, 11G-74, 2A717A, 2A-717-A, 2A-829, BE-53-B
Casting Numbers:
Comments:
948 CC, SPRITE MK I, #9CGDAH101
MG
800 SC
4.5039" (114.400 MM)
1.1
67
61-62
9CG
2.480" (62.992 MM)

.125" (3.175 MM)
@ CENTER
SPRITE II, MK I, M
62-62
10CG & 10CC
2.543" (64.580 MM)

Stroke: 3.296" (83.720 MM)
Cyl Bore:
1.6254-1.6259" (41.285-41.298 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
TYPE 10 CG * 1.7505-1.7510" (44.463-44.475 MM) *
Main:
@ CENTER
Main:
Thrust Width:
Comments:
1098CC, MG MK I, SPRITE II, MG MK II, SPRITE III * TYPE 10CC CRANK JOURNAL DIAMETER =
2.0005-2.0010" (50.813-80.825 MM)
MG
1.1
70
Stroke: 3.504" (89.002 MM)

1.6254-1.6259" (41.285-41.298 MM)
Rods:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
125430, 168557, 1737642, 22528, ECS-M-28
Casting Numbers:
MG
1.2
40-56
Cyl Bore:
Rod Fillet:
2.500" (63.5 MM)

1/8 (.125)
Thrust Width:
1.5000
73
54-61
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
11F-74-CF, 11G-74-CF, BB-38-AX, BT-79-3, PG-38-A
Casting Numbers:
MG
1.3
76
TD
2.579" (65.507 MM)

.125" (3.175 MM)
MIDGET
66-70
XPAG/TD
2.618" (66.497 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
1.7720" (45.009 MM) MAX UNDERSIZE -.060
.098" (2.5 MM)
Rods:
Rod Fillet:
WIDTH 1.496 2.0470" (51.994 MM) MAX UNDERSIZ
Main:
1.496" (38.000 MM) @ #2
Main:
Thrust Width:
2.312" SLINGER GROOVE IN BLOCK IS 2.319"
Rear Seal Diameter:
Comments:
XPAG/TD UP-ENG #9407, XPAG/TD/2 FROM ENG #9408 #2 BRG LENGTH 1.496
MG
1.3
76
40-54
2.638" (67.005 MM)

Stroke: 3.504" (89.002 MM)
Cyl Bore:
1.6254-1.6259" (41.285-41.298 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
1.5000
Main:
Thrust Width:
12012G159, 12G1505A, 168557, 1737642, 22528, ECS-M-28
Casting Numbers:
Comments:
TD, 1250 CC CAST #22528 MAY HAVE MAINS 2.0458-2.0466" & RODS 1.7706-1.7714"
345
TD

Make
Liter
CID
Vin
Model
Year
MG
4 Cylinders
1.3
MG
78
MK III MIDGET
Stroke: 3.200" (81.280 MM)

Cyl Bore:
1.6254-1.6259" (41.285-41.298 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
Thrust Width:
12012G159, 12G1505A, 168557, 1737642, ECS-M-28
Casting Numbers:
Comments:
MG
1.3
78
1.5
91
1.5
1.6
1.6
66-74
91
MIDGET
2.898" (73.609 MM)
Thrust Width:
THRUST @ REAR
Cyl Bore:
Rod Fillet:
2.874" (73. MM)

.125" (3.175 MM)
54-59
99
MARK I
Cyl Bore:
Rod Fillet:
99
75-80
Cyl Bore:
Stroke: 3.504" (89.002 MM)

1.8757-1.8762" (47.643-47.655 MM)
Rods:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
12H55CFD67B
Casting Numbers:
Comments:
MGA 1588 CC MARK I
MG
1.5000 @ CENTER
2.7795" (70.599 MM)
Cyl Bore:
Stroke: 3.504" (89.002 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
BB-38-AX, BT-79-3, PG-38-A
Casting Numbers:
Comments:
MGA 1500
MG
66-74
2.780" (70.612 MM)

.125" (3.175 MM)
Stroke: 3.465" (88.011 MM)

1.8750-1.8755" (47.625-47.638 MM)
Rods:
2.3110-2.3120" (58.699-58.725 MM)
Main:
Main:
311406
Casting Numbers:
Comments:
1BC, PE94J, OHV, MIDGET
MG
(cont.)
1275CC, MK3 MIDGET
Stroke: 3.200" (81.28 MM)

1.7504-1.7509" (44.46-44.473 MM)
Rods:
2.2150-2.2155" (56.261-56.273 MM)
Main:
Main:
Comments:
1BC
MG
Engine Model
60-61
2.968" (75.387 MM)

.125" (3.175 MM)
MARK II
61-62
2.992" (75.997 MM)

Stroke: 3.504" (89.002 MM)
Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
11F-74-CF, 11F-74-CF, 11G-74-CF, 11G-74-CF, BB-38-AX, BB-38-AX, BT-79-3, BT-79-3, PG-38-A,
Casting Numbers:
PG-38-A
Comments:
MGA 1622 CC MARK II
MG
1.8
110
65-72
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
Rod Fillet:
#1 2.1262-2.1270" (54.005-54.026 MM)
Main:
Main:
12H1354, 12H195, 12H4198, 22H1954A
Casting Numbers:
Comments:
LATE - 5 MAIN USE CORRECT OIL PUMP AND PAN GASKETS 5 MAINS
MG
1.8
110
65-72
Stroke: 3.504" (89.002 MM)

Cyl Bore:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
Rod Fillet:
#1 2.1262-2.1270" (54.005-54.026 MM)
Main:
Main:
Thrust Width:
12H764A
Casting Numbers:
Comments:
EARLY- 3 MAIN USE CORRECT OIL PUMP AND PAN GASKETS 3 MAINS
MG
1.8
110
H(3)
3.504" (89.002 MM)

Stroke:
1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1265-2.1270" (54.013-54.026 MM)
Main:
Main:
Comments:
2BC
MG
1.8
Stroke: 3.504" (89.002 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1265-2.1270" (54.013-54.026 MM)
Main:
Main:
Comments:
1BC
110
3.159" (80.236 MM)

1/8 (.125)
3.157" (80.188 MM)

1/8 (.125)
@ #2
72-74
Cyl Bore:
3.1596" (80. MM)
Cyl Bore:
3.157" (80.188 MM)
H(2)
73-76
346
PE94J

Make
Liter
CID
Vin
Model
MG
4 Cylinders
1.8
MG
110
Stroke: 3.504" (89.002 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1265-2.1270" (54.013-54.026 MM)
Main:
Main:
1BC
Comments:
1.8
MG
3.157" (80.188 MM)
Cyl Bore:
3.157" (80.188 MM)
2 Cylinders
0.9
54
Stroke: 3.250" (82.55 MM)

1.8090-1.8100" (45.949-45.974 MM)
Rods:
CA-70
Casting Numbers:
MTHD
Cyl Bore:
Rod Fillet:
MILITARY STD
4 Cylinders
1.8
108
Stroke: 3.250" (82.55 MM)

1.8090-1.8100" (45.949-45.974 MM)
Rods:
CA-68, CA-71-C
Casting Numbers:
MVH4D
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
3.250" (82.55 MM)

.109" (2.769 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
3.250" (82.55 MM)

.094" (2.388 MM)
.109
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

.109" (2.769 MM)
Thrust Width:
1.3820
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.438" (87.325 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.8820"
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.438" (87.325 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.3820
WISCONSIN MVH4D ROLLER BEARING MAIN
MILITARY STD
2.0
125
Stroke: 3.750" (95.25 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main: Numbers:
182111
Casting
Comments:
3.250" (82.55 MM)

.094" (2.388 MM)
WISCONSIN MTHD ROLLER BEARING MAIN
MILITARY STD
Comments:
(cont.)
65-75
MILITARY STD
MILITARY STD
Engine Model
77-80
Cyl Bore:
112
Stroke: 3.504" (89.002 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1265-2.1270" (54.013-54.026 MM)
Main:
Main:
Comments:
1800
Comments:
Year
180GB
WAUKESHA 180GB
MILITARY STD
2.2
133
Stroke: 4.000" (101.6 MM)

1.8090-1.8100" (45.949-45.974 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main: Numbers:
220229C, 68111
Casting
MILITARY STD
2.4
145
Stroke: 4.375" (111.125 MM)

2.0590-2.0605" (52.299-52.337 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main:
182111, CA-69-D, F-400C-359, F-400C-503
Casting Numbers:
Comments:
CONTINENTAL FS-145
MILITARY STD
2.5
153
Stroke: 4.125" (104.775 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
B-5960
Casting Numbers:
Comments:
BUDA 4MB
MILITARY STD
2.7
Stroke: 4.375" (111.125 MM)

2.0590-2.0605" (52.299-52.337 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main:
F-400C-359, F-400C-503
Casting Numbers:
Comments:
CONTINENTAL FS-162
FS-145
4MB
162
FS-162
347

Make
Liter
CID
Vin
Model
MILITARY STD
186
Stroke: 3.750" (95.25 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.2452-2.2460" (57.028-57.048 MM)
Main:
Main: Numbers:
187111
Casting
Comments:
185GB
Cyl Bore:
Rod Fillet:
Main Fillet:
3.250" (82.55 MM)

.109" (2.769 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
3.438" (87.325 MM)

.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.250" (82.55 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.3820
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.250" (82.55 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.8820
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.438" (87.325 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.8820
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.438" (87.325 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.3820
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.109" (2.769 MM)
Thrust Width:
1.8820
WAUKESHA 185GB
3.4
MILITARY STD
209
Stroke: 3.750" (95.25 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.2452-2.2460" (57.028-57.048 MM)
Main:
Main:
187111
Casting Numbers:
Comments:
186GM WAUKESHA
3.6
MILITARY STD
3.8
MILITARY STD
3.9
4.0
5.6
6MB237
244
Stroke: 4.375" (111.125 MM)

2.0590-2.0605" (52.299-52.337 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main:
F-600C-512
Casting Numbers:
Comments:
CONTINENTAL FS-244
MILITARY STD
6MB230
237
Stroke: 4.250" (107.95 MM)

2.0590-2.0605" (52.299-52.337 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
220825E
Casting Numbers:
Comments:
BUDA 6MB237
MILITARY STD
FS-218
230
Stroke: 4.125" (104.775 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
4505959
Casting Numbers:
Comments:
BUDA 6MB230
MILITARY STD
186GM
218
Stroke: 4.375" (111.125 MM)

2.0590-2.0605" (52.299-52.337 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main:
F-600C-512, F-600C-512
Casting Numbers:
Comments:
CONTINENTAL FS-218
FS-244
339
Stroke: 4.500" (114.3 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
220426-C
Casting Numbers:
Comments:
HERCULES JXLD
JXLD
MINN MOLINE
3 Cylinders
1.9
MINN MOLINE
118
G350
Stroke: 4.330" (109.982 MM)

Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
Main:
Thrust Width:
G350 TRACTOR, FIAT DIESEL, ALSO HESTON & OLIVER
Comments:
MINN MOLINE
G350 DIESEL
3.7402-3.7406" (95.001-95.011 MM)
1.2597-1.2638
4 Cylinders
0.0
MINN MOLINE
Casting Numbers:
Comments:
Engine Model
6 Cylinders
3.0
MILITARY STD
Year
302
10A-6032
MODEL 302, BG TRACTOR
348
302

Make
Liter
CID
Vin
Model
MINN MOLINE
MINN MOLINE
4 Cylinders
2.7
3.0
3.3
3.4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.625" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
2.1930
Cyl Bore:
Rod Fillet:
Main Fillet:
3.625" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
165
335
Stroke: 6.000" (152.4 MM)

2.5770-2.5775" (65.456-65.469 MM)
Rods:
2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
10A7502
Casting Numbers:
Comments:
335 GAS TRACTOR
MINN MOLINE
206
3.4
206
335
MINN MOLINE
3.4
206
MINN MOLINE
3.6
445
3.9
ZB
445 GAS
3.6255-3.6265" (92.088-92.113 MM)
7/64 (.109)
7/64 (.109)
ZB
ZB
Cyl Bore:
3.625" (92.075 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.7518-3.7522" (95.296-95.306 MM)

.109" (2.769 MM)
.109" (2.769 MM)
2.1930
220
Stroke: 5.000" (127. MM)

2.6245-2.6250" (66.662-66.675 MM)
Rods:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main 1:
#2 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main 2:
#3 2.9995-3.0000" (76.187-76.2 MM)
Main 3:
4.250" (107.95 MM)
Rear Seal Diameter:
10A-12751, 10A-20411, 10A-6032
Casting Numbers:
Comments:
OHV, GAS
MINN MOLINE
335 DIESEL
3.6255-3.6265" (92.088-92.113 MM)
.109" (2.769 MM)
.109" (2.769 MM)
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6245-2.6250" (66.662-66.675 MM)
Rods:
Rod Fillet:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main 1:
Main Fillet:
#2 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main 2:
#3 2.9995-3.0000" (76.187-76.2 MM)
Main 3:
4.250" (107.95 MM)
Rear Seal Diameter:
10A-12751, 10A-2700, 10A-6032, 10A7502, RE-370
Casting Numbers:
Comments:
GAS, OHV, 445 TRACTOR ROLLER BEARING MAINS
Stroke: 5.000" (127. MM)

2.6245-2.6250" (66.662-66.675 MM)
Rods:
FRONT ROLLER
Main 1:
CENTR 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main 2:
REAR 2.9995-3.0000" (76.187-76.2 MM)
Main 3:
Comments:
ZB SERIES, GAS & LP-GAS TRACTORS
335 GAS
4.624" (117.45 MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6245-2.6250" (66.662-66.675 MM)
Rods:
Rod Fillet:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main 1:
Main Fillet:
#2 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main 2:
#3 2.9995-3.0000" (76.187-76.2 MM)
Main 3:
4.250" (107.95 MM)
Rear Seal Diameter:
10A-12751, 10A-2700, 10A-6032, 10A7502, RE-370
Casting Numbers:
Comments:
DIESEL, OHV, 335, 445 TRACTORS ROLLER BEARING MAINS
MINN MOLINE
(cont.)
186
Stroke: 4.500" (114.3 MM)

2.6245-2.6250" (66.662-66.675 MM)
Rods:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main 1:
#2 2.9995-3.0000" (76.187-76.2 MM)
Main:
Main 2:
RE-351-C, RE-351-D
Casting Numbers:
MINN MOLINE
Engine Model
165
Stroke: 4.000" (101.6 MM)

2.6245-2.6250" (66.662-66.675 MM)
Rods:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main 1:
#3 2.9995-3.0000" (76.187-76.2 MM)
Main 2:
EE-351
Casting Numbers:
MINN MOLINE
Year
236
Stroke: 5.000" (127. MM)

Cyl Bore:
2.6245-2.6250" (66.662-66.675 MM)
Rods:
Rod Fillet:
#1 2.7495-2.7500" (69.837-69.85 MM)
Main 1:
Main Fillet:
#2 2.7495-2.7500" (69.837-69.85 MM)
Main:
Main 2:
#3 2.9995-3.0000" (76.187-76.2 MM)
Main 3:
10A-12751, 10A-2700, 10A-6032, 10A7502, RE-370
Casting Numbers:
Comments:
DIESEL, OHV ROLLER BEARING MAINS
349
3.875" (98.425 MM)

.109" (2.769 MM)
.109

Make
Liter
CID
Vin
Model
Year
MINN MOLINE
MINN MOLINE
4 Cylinders
4.6
284
Stroke: 5.000" (127. MM)

2.5770-2.5775" (65.456-65.469 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
3.006" (76.352 MM)
Rear Seal Diameter:
FE-4D, KE-401-B
Casting Numbers:
Comments:
U & UB
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
G283-4A
4.2510-4.2520" (107.975-108.001 MM)

7/64
7/64
3.503
GAS, G283-4A, U&UB TRACTORS
MINN MOLINE
4.6
284
UB
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
3.006" (76.352 MM)
Rear Seal Diameter:
FE-4D, KE-401-B
Casting Numbers:
Comments:
DIESEL, D283-4A, UB SERIES
MINN MOLINE
5.5
336
MINN MOLINE
5.5
6.6
4.250" (107.95 MM)

7/64 (.109)
7/64 (.109)
3.503
Cyl Bore:
4.625" (117.475 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.625" (117.475 MM)

.156" (3.962 MM)
.156" (3.962 MM)
3.503
57-67
403
Stroke: 6.000" (152.4 MM)

2.7495-2.7500" (69.837-69.85 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
LE401, LE-401
Casting Numbers:
Comments:
GB GAS, GBLP LP-GAS TRACTORS
GB
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
MINN MOLINE
MINN MOLINE
D283-4A
D336
336
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
3.006" (76.352 MM)
Rear Seal Diameter:
10A-10247
Casting Numbers:
Comments:
336A-4A GAS
MINN MOLINE
38-57
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
2.9110-2.9120" (73.939-73.965 MM)
Main:
3.006" (76.352 MM)
Main:
Rear Seal Diameter:
Comments:
D336, 5 STAR DIESEL
47-61
336A-4A
GB
4.625" (117.475 MM)

7/64 (.109)
7/64 (.109)
3.5030
6 Cylinders
7.0
425
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
CE-401-A
Casting Numbers:
Comments:
38-57
Engine Model
GB
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
54-61
D425
4.2510-4.2520" (107.975-108.001 MM)

7/64 (.109)
7/64 (.109)
3.503
D425, GBD DIESEL
MINN MOLINE
7.4
451
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
Comments:
D451 DIESEL
MINN MOLINE
8.3
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
3.006" (76.352 MM)
Rear Seal Diameter:
10A-5090
Casting Numbers:
Comments:
504B-6
D451
504
540B-6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
350
D451
4.375" (111.125 MM)
Cyl Bore:
61-67
4.625" (117.475 MM)
.109" (2.769 MM)
.109" (2.769 MM)
3.503
504B-6

Make
Liter
CID
Vin
Model
Year
MINN MOLINE
6 Cylinders
9.6
MINN MOLINE
585
Stroke: 5.500" (139.7 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
D585-6 DIESEL
Comments:
9.9
MINN MOLINE
13.1
D585-6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.625" (117.475 MM)

.109" (2.769 MM)
.109
3.503
55-67
HD800
3 Cylinders
0.7
42
Stroke: 2.756" (70.000 MM)

1.5748" (40.000 MM)
Rods:
1.6929" (43.000 MM)
Main:
Main:
DIESEL, OHV, L3A-61TG
Comments:
MITSUBISHI
0.8
0.9
47
0.9
MITSUBISHI
0.9
52
55
MITSUBISHI
1.1
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
Comments:
CASE 255, INT 254 DIESEL
K3B
2.677" (67.996 MM)
@ #3
K3C
Thrust Width:
58
MT180
2.7559" (70. MM)
Cyl Bore:
@ #3
L3E
60
L3E
2.9921" (76.000 MM)
Cyl Bore:
1.0
@ #3
K3B
Thrust Width:
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
Comments:
MT210, MT210D, CASE MODEL 244 245, DIESEL
MT160
2.5590" (64.999 MM)
Cyl Bore:
Stroke: 2.7559" (70.000 MM)

1.5750" (40.000 MM)
Rods:
1.6930" (43.000 MM)
Main:
Main:
Balance: Internal
Comments:
DIESEL, OHV, L3E-61TG
MITSUBISHI
K3A
Thrust Width:
Stroke: 3.071" (78.003 MM)

1.6535" (41.999 MM)
Rods:
2.0472" (51.999 MM)
Main:
Main:
Comments:
MT180, MT180D, DIESEL
L3A
2.5590" (65.000 MM)
Cyl Bore:
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
Comments:
CASE MODEL 235, 235H, DIESEL
MITSUBISHI
L3A
Cyl Bore:
Stroke: 3.071" (78.003 MM)

1.6530-1.6540" (41.986-42.012 MM)
Rods:
2.0467-2.0477" (51.986-52.012 MM)
Main:
Main:
Comments:
MT160, MT160D, DIESEL
MITSUBISHI
HD800A-6A
5.3190-5.3200" (135.103-135.128 MM)
Cyl Bore:
MITSUBISHI
MITSUBISHI
D585-6
4.7520-4.7530" (120.701-120.726 MM)
800
Stroke: 6.000" (152.4 MM)

3.2480-3.2490" (82.499-82.525 MM)
Rods:
3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
Comments:
WHITE/HD800A-6A
(cont.)
Cyl Bore:
605
Stroke: 6.000" (152.4 MM)

2.7495-2.7500" (69.837-69.85 MM)
Rods:
#1 2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
HE-401-A
Casting Numbers:
MINN MOLINE
Engine Model
K3D
Thrust Width:
65
MT210
2.8740-2.8748" (73.-73.02 MM)
Cyl Bore:
@ #3
K3E
Cyl Bore:
Thrust Width:
351
K3E
2.9921-3.0000" (75.999-76.2 MM)
@ #3

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
3 Cylinders
1.3
79
K3H
Stroke: 3.543" (89.992 MM)

1.8895-1.8905" (47.993-48.019 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main:
MT250, MT250D, CASE MODEL 265, DIESEL
Comments:
MITSUBISHI
1.5
MT250
@ #3
Thrust Width:
91
K3M
MT300
3.307" (83.998 MM)
Cyl Bore:
@ #3
Thrust Width:
MITSUBISHI
MITSUBISHI
4 Cylinders
0.0
4DQ5
Stroke: 3.701" (94.005 MM)

2.2813-2.2822" (57.945-57.968 MM)
Rods:
2.5577-2.5584" (64.966-64.983 MM)
Main:
Main:
DIESEL, USED IN A CASE TRENCHER
Comments:
MITSUBISHI
1.1
69
1.2
K4B
73
1.3
80
1.4
K4D
86
1.4
K4E
1.4
77-84
MITSUBISHI
1.5
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
1.8890-1.8898" (47.981-48.001 MM)

Main:
Main:
G1
Casting Numbers:
Comments:
CARB, MIRAGE, PRECIS
Cyl Bore:
2.913" (73.99 MM)
Thrust Width:
.948 @ #3
88
4G33
Stroke: 3.385" (85.979 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
FORKLIFT, 1.4L
Stroke:
Rods:
K4E
2.9921" (76.000 MM)
86
Stroke: 3.228" (81.991 MM)

1.6528-1.6535" (41.981-41.999 MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
G1
Casting Numbers:
Comments:
SOHC PILOT HOLE DIAM 1.030
MITSUBISHI
K4D
2.8740" (73.000 MM)
Cyl Bore:
Stroke: 3.0710" (78.000 MM)

Cyl Bore:
1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
DIESEL, 13A TRACTOR , 31DS, 31HM, & 31HS BACK HOE
MITSUBISHI
K4C
2.7559" (70.000 MM)
Cyl Bore:
Stroke: 3.0710" (78.000 MM)

1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
DIESEL, WATER-COOLED, 4-CYCLE, VERTICAL
MITSUBISHI
K4B
2.6772" (68.000 MM)
K4C
Stroke: 3.0710" (78.000 MM)

1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
DIESEL, WATER-COOLED, 4-CYCLE, VERTICAL
MITSUBISHI
4DQ5
3.307" (83.998 MM)
.120" (3.048 MM)
.120
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.0710" (78.000 MM)

Cyl Bore:
1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
DIESEL,13A TRACTOR, WATER-COOL, 4 CYCLE, VERTICAL
MITSUBISHI
(cont.)
3.0709-3.0787" (78.001-78.199 MM)
Cyl Bore:
Stroke: 3.543" (89.992 MM)

1.8895-1.8905" (47.993-48.019 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main:
Comments:
MT300, MT300D, CASE MODEL 275, DIESEL
Engine Model
Cyl Bore:
90
4G33
2.8740" (73. MM)
MIRAGE
85-88
G15B
Cyl Bore:
2.9724-2.9736" (75.499-75.529 MM)
Rod Width:
.850" (21.59 MM)
Thrust Width:
.948 @ #3
352

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
Stroke:
Rods:
4 Cylinders
1.5
90
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
1.8890-1.8898" (47.981-48.001 MM)

Main:
Main:
4G1, G1
Casting Numbers:
Comments:
MFI, MIRAGE * ROD WIDTH .790 IN 1990
MITSUBISHI
Stroke:
Rods:
1.5
90
2.9724-2.9736" (75.499-75.529 MM)
Rod Width:
.850" (21.59 MM) *
Thrust Width:
.948 @ #3
PRECIS
MITSUBISHI
1.5
2.970" (75.438 MM)
Rod Width:
.850" (21.59 MM)
Thrust Width:
.948 @ #3
91
91
KE150
MITSUBISHI
1.5
90-94
Cyl Bore:
92
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
1.6
98
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
31
Casting Numbers:
Comments:
EFI, TURBO, MIRAGE
MITSUBISHI
1.6
MITSUBISHI
1.6
.790" (20.066 MM)

.948 @ #3
98
.948 @ #3
.744-.746" BETWEEN
85-86
@ #3
MIRAGE
87-88
3.028" (76.911 MM)
Thrust Width:
1.145 @ #3
MIRAGE
Cyl Bore:
Thrust Width:
353
G32B
3.028" (76.911 MM)
Cyl Bore:
4G15
.7900" (20.066 MM)
Thrust Width:
98
90-99
2.972" (75.489 MM)
MIRAGE
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
31
Casting Numbers:
Comments:
EFI, TURBO, MIRAGE
Stroke: 2.950" (74.93 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
4G61
Casting Numbers:
Comments:
DOHC, MFI, TURBO, MIRAGE
2.972" (75.489 MM)
MIRAGE
Cyl Bore:
Rod Width:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Thrust Width:
1.181" (29.997 MM)
G1
Casting Numbers:
Comments:
MPFI, MIRAGE, PRECIS, 12 VALVE HEAD PILOT BRG DIAM 1.260
FLATS FOR OIL PUMP DRIVE
MITSUBISHI
KE150
3.0710" (78.000 MM)
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
Rod Width:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Thrust Width:
G1
Casting Numbers:
Comments:
MPFI .744-.746" BETWEEN FLATS FOR OIL PUMP DRIVE
Stroke:
Rods:
87-89
Cyl Bore:
Stroke: 3.0710" (78.000 MM)

Cyl Bore:
1.8898" (48.000 MM)
Rods:
2.2441" (57.000 MM)
Main:
Main:
Comments:
DIESEL,& KE150-T,TYPE 31A,F,FA,SS,TS,& SS,61A & WM
Stroke:
Rods:
89-90
Cyl Bore:
1.8890-1.8898" (47.981-48.001 MM)

Main:
Main:
Comments:
CARBURATED, PRECIS 1.260 PILOT HOLE
1.5
(cont.)
PILOT BRG HOLE DIAM 1.260
3.228" (81.991 MM)

1.6527-1.6535" (41.979-41.999 MM)
MITSUBISHI
MIRAGE
Engine Model
G32B
89-90
3.2402-3.2413" (82.301-82.329 MM)
@ #3
4G61

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
4 Cylinders
1.6
98
Stroke: 2.953" (75.006 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
MFI, MIRAGE
Comments:
MITSUBISHI
1.6
98
1.6
98
MITSUBISHI
1.6
98
1.8
1.8
107
1.8
107
1.8
107
1.8
109
MITSUBISHI
1.8
3.032" (77.013 MM)
Thrust Width:
1.145 @ #3
Cyl Bore:
3.032" (77.013 MM)
83-86
@ #3
ECLIPSE
3.173" (80.594 MM)
Thrust Width:
1.145
ECLIPSE
4G37
93-94
Cyl Bore:
3.1732" (80.599 MM)
Thrust Width:
1.144 @ #3
Cyl Bore:
3.1732" (80.599 MM)
Thrust Width:
1.144 @ #3
4G37
89-92
CORDIA
82-83
4G37
G62B
3.169" (80.493 MM)
@ #3
Thrust Width:
CORDIA
Cyl Bore:
Thrust Width:
110
90-92
Cyl Bore:
Cyl Bore:
109
4G32
83-84
Stroke: 3.460" (87.884 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
EFI, TURBO, CORDIA, TREDIA
Stroke: 3.504" (89.002 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
#1 2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
G37
Casting Numbers:
Comments:
MFI
Cyl Bore:
Stroke: 3.461" (87.909 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
2BC, CORDIA, TREDIA
MITSUBISHI
1.145 @ #3
Stroke: 3.386" (86.004 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
Comments:
89-90 DODGE, 89-92 PLYM THRUST ON #3 MAIN
MITSUBISHI
Thrust Width:
4G61
80-95
Stroke: 3.386" (86.004 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
10-B, 31-87, 4G-3, G52
Casting Numbers:
Comments:
SOHC, ECLIPSE
MITSUBISHI
3.0276" (76.901 MM)
Thrust Width:
Stroke: 3.386" (86.004 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
#1 2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
G37
Casting Numbers:
Comments:
SOHC, ECLIPSE
MITSUBISHI
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
2BC
MITSUBISHI
3.240" (82.296 MM)
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
2BC, SOHC
(cont.)
90-92
Cyl Bore:
IND
Stroke: 3.386" (86.004 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
SOHC, INDUSTRIAL, FORKLIFT ENGINE
MITSUBISHI
MIRAGE
Engine Model
84-88
G62B
3.170" (80.518 MM)
@ #3
92-94
G37B
Cyl Bore:
3.1894-3.1898" (81.011-81.021 MM)
Thrust Width:
1.145
354

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
4 Cylinders
1.8
111
Stroke: 3.504" (89.002 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
1.9678-1.9685" (49.982-50. MM)
Main:
Main:
SOHC, MFI, MIRAGE, 16 VALVE, EXPO LRV
Comments:
MITSUBISHI
2.0
2.0
MIRAGE
(cont.)
92-00
Cyl Bore:
3.1734" (80.604 MM)
Thrust Width:
@ #3
122
4G93
4G52
Stroke: 3.543" (89.992 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
G52, G52, G6
Casting Numbers:
Comments:
SOHC, GAS FORKLIFT
MITSUBISHI
Engine Model
122
4G52
3.307" (83.998 MM)
Cyl Bore:
4G63
4G63
3.3465-3.3476" (85.001-85.029 MM)

Stroke: 3.465" (88.011 MM)
Cyl Bore:
1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.980-56.995 MM)
Main:
1.1440" (29.057 MM) @ #3 *
Main:
Thrust Width:
Comments:
SOHC, GAS, INDUSTRIAL FORKLIFT * 1992 & UP 1.0130" (25.730 MM) @ #3
MITSUBISHI
2.0
122
Stroke: 3.465" (88.011 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
2BC, TREDIA, P/UP, CORDIA
MITSUBISHI
2.0
122
2.0
122
MITSUBISHI
2.0
122
2.0
122
1.144 @ #3
CORDIA
84-86
Cyl Bore:
3.350" (85.09 MM)
Thrust Width:
1.144 @ #3
CORDIA
87
Cyl Bore:
3.350" (85.09 MM)
Thrust Width:
1.144 @ #3
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
59-PK, 63-GC, 65-RU, 69-GU, 80RF
Casting Numbers:
Comments:
2BC, CORDIA, TREDIA, P/UP, GALANT
MITSUBISHI
Thrust Width:
Stroke: 3.460" (87.884 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
59-PK, 63-GC, 65-RU, 69-GU, 80RF
Casting Numbers:
Comments:
2BC, CORDIA, TREDIA, P/UP
83
3.346" (84.988 MM)
Stroke: 3.460" (87.884 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
59-PK, 63-GC, 65-RU, 69-GU, 80RF
Casting Numbers:
Comments:
2BC, CORDIA, TREDIA, P/UP
MITSUBISHI
CORDIA
Cyl Bore:
CORDIA
88-89
Cyl Bore:
3.347" (85.014 MM)
Thrust Width:
1.144 @ #3
ECLIPSE
G63B
G63B
G63B
G63B
90-92
4G63
3.3465-3.3476" (85.001-85.029 MM)

Stroke: 3.465" (88.011 MM)
Cyl Bore:
1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
1.144 @ #3 *
Main:
Thrust Width:
59-PK, 63-GC, 65-RU, 69-GU, 80RF, G6
Casting Numbers:
Comments:
DOHC, NON-TURBO, GALANT, ECLIPSE * 1992 & UP 1.0130" (25.730 MM) @ #3
MITSUBISHI
2.0
Stroke: 3.465" (88.011 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
G6
Casting Numbers:
Comments:
DOHC, MFI, ECLIPSE
122
ECLIPSE
93-94
Cyl Bore:
3.3465-3.3476" (85.001-85.029 MM)
Thrust Width:
1.0130" (25.730 MM) @ #3
355
4G63

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
Stroke:
Rods:
4 Cylinders
2.0
122
3.267" (82.982 MM)

1.8894-1.8900" (47.991-48.006 MM)
ECLIPSE
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.0469-2.0475" (51.991-52.007 MM)

Main:
Main:
Balance: Internal
1.2593-1.2604" (31.986-32.014 MM)
3.5795-3.5858" (90.919-91.079 MM)
Rear Seal Diameter:
4667755, 4K05
Casting Numbers:
Comments:
Engine Model
(cont.)
95-99
420A
3.4446-3.4452" (87.493-87.508 MM)

.057-.067" (1.448-1.702 MM)
1.039-1.047" (26.391-26.594 MM)
.057-.067" (1.448-1.702 MM)
1.013 @ #3
CHRY 420A DOHC ENG, NON/TURBO, 16 VALVE, ECLIPSE REAR FLANGE OD = 1.8878-1.8897", ID = 1.3386"
MITSUBISHI
2.0
122
Stroke: 3.465" (88.011 MM)

1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2434-2.2441" (56.982-57. MM)
Main:
Main:
G6
Casting Numbers:
Comments:
DOHC, MFI, TURBO, ECLIPSE
MITSUBISHI
2.0
122
2.0
2.0
1.0130" (25.730 MM) @ #3
GALANT
2.0
2.0
Thrust Width:
1.144 @ #3 *
122
LANCER
122
MITSUBISHI
2.1
127
MITSUBISHI
2.3
-04
4G63
3.3464" (85.000 MM)
74-82
4G52
3.307" (83.998 MM)
1.144 @ #3
90-92
4G63
Cyl Bore:
3.3465-3.3476" (85.001-85.029 MM)
Thrust Width:
1.144@ #3 *
Cyl Bore:
Rod Fillet:
Main Fillet:
3.3070" (83.998 MM)

.120" (3.048 MM)
.120
74-89
140
Stroke: 3.701" (94.000 MM)

2.2813-2.2822" (57.945-57.965 MM)
Rods:
2.5577-2.5585" (64.965-64.985 MM)
Main:
Main:
Comments:
DIESEL, 450-D & 4500D TORO REELMASTER
4G94
@ #3
LANCER EVO
Stroke: 3.465" (88.011 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
59-PK, 63-GC, 65-RU, 69-GU, 80RF, G6
Casting Numbers:
Comments:
DOHC, TURBO * 1992 & UP 1.013
Stroke: 3.7010" (94.005 MM)

2.2813-2.2821" (57.945-57.965 MM)
Rods:
2.5577-2.5584" (64.966-64.983 MM)
Main:
Main:
Comments:
DIESEL
02-05
3.2086" (81.500 MM)
122
122
4G63
3.3465-3.3476" (85.001-85.029 MM)
Stroke: 3.543" (89.992 MM)

Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
Rods:
#1 2.5976-2.5984" (65.979-65.999 MM) *
Main:
Main:
Thrust Width:
G52, G54, G6
Casting Numbers:
Comments:
SOHC, INDUSTRIAL, 8 VALVE *-1978; 1979-82: 2.3614-2.3622
MITSUBISHI
89-92
Cyl Bore:
Stroke: 3.465" (88.000 MM)

Cyl Bore:
1.7716" (45.000 MM)
Rods:
2.2441" (57.000 MM)
Main:
Main:
Comments:
DOHC, TURBO, AWD EVOLUTION, SPECIAL PERFORMANCE
MITSUBISHI
4G63
Thrust Width:
Stroke: 3.9370" (99.999 MM)

Cyl Bore:
1.8504" (47.000 MM)
Rods:
1.9685-1.9700" (49.999-50.000 MM)
Main:
Main:
Thrust Width:
Balance: Internal
Comments:
SOHC,MFI,120HP NON-TURBO,LANCER ES,LS & O-Z RALLY
MITSUBISHI
95-99
3.3465-3.3476" (85.001-85.029 MM)
Stroke: 3.465" (88.011 MM)

1.7709-1.7715" (44.981-44.996 MM)
Rods:
2.2433-2.2439" (56.98-56.995 MM)
Main:
Main:
Comments:
SOHC, MFI, GALANT, 8 VALVE * 1992 & UP 1.013
MITSUBISHI
ECLIPSE
Cyl Bore:
4DQ7
Cyl Bore:
356
-95
3.465" (88.000 MM)
4DQ7

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
4 Cylinders
2.3
143
Stroke: 3.543" (89.992 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.5976-2.5984" (65.979-65.999 MM)
Main:
Main:
TURBO DIESEL
Comments:
MITSUBISHI
2.4
143
2.4
3.5866" (91.1 MM)
Thrust Width:
1.220 @ #3
4G64
94-97
4G64
@ #3
Thrust Width:
4D55
3.406" (86.512 MM)
Cyl Bore:
143
(cont.)
83-87
Cyl Bore:
IND
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
Comments:
SOHC, ENGINE, LPG, 8 VALVE
MITSUBISHI
4D55
Engine Model
GALANT
93-04
4G64
3.4055-3.4067" (86.5-86.53 MM)

Stroke: 3.937" (100. MM)
Cyl Bore:
1.7709-1.7717" (44.981-45.001 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
1.140 @ #3
Main:
Thrust Width:
Balance: Internal
1.732" (43.993 MM)
3.346" (84.988 MM)
Rear Seal Diameter:
Comments:
SOHC, GALANT 16 VALVES, 6/92 UP, OUTLANDER SOHC: 6 BOLT FLANGE, 1.140 THRUST BR WIDTH.
DOHC: 7 BOLT FLANGE, 1.000 THRUST BRG WIDTH
MITSUBISHI
2.4
143
GALANT
94-95
4G64
3.406" (86.512 MM)

Stroke: 3.937" (100. MM)
Cyl Bore:
1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2434-2.2441" (56.982-57. MM)
Main:
1.140 @ #3
Main:
Thrust Width:
Comments:
DOHC, GALANT, MFI SOHC: 6 BOLT FLANGE, 1.140 THRUST BRG WIDTH DOHC: 7 BOLT FLANGE, 1.000
THRUST BRG WIDTH
MITSUBISHI
2.4
143
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
45-T, 64
Casting Numbers:
Comments:
SOHC, EFI
MITSUBISHI
2.4
143
MITSUBISHI
2.4
143
MITSUBISHI
2.4
3.406" (86.512 MM)
Thrust Width:
1.140 @ #3
Cyl Bore:
3.4055" (86.5 MM)
Thrust Width:
1.140 @ #3
Stroke: 3.937" (100. MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
45-T, 64
Casting Numbers:
Comments:
SOHC, MFI, GALANT, EXPO, TRUCK, 8 VALVE
Stroke: 3.940" (100.076 MM)

1.7710-1.7717" (44.983-45.001 MM)
Rods:
2.2435-2.2441" (56.985-57. MM)
Main:
Main:
1.731" (43.967 MM)
45-T, 64
Casting Numbers:
Comments:
SOHC, MFI, VAN
85-86
Cyl Bore:
G64B
89-92
VAN
87-88
Cyl Bore:
3.410" (86.614 MM)
Thrust Width:
1.140 @ #3
146
GALANT
4G64
G64B
05-06
Cyl Bore:
3.425" (87.000 MM)
Cyl Bore:
3.5866-3.5877" (91.100-91.130 MM)
1.7716" (45.000 MM)

Rods:
2.2441" (57.000 MM)
Main:
Main:
Comments:
SOHC, MITEC
MITSUBISHI
2.5
Stroke: 3.740" (95.000 MM)

2.0855-2.0866" (52.973-53.000 MM)
Rods:
2.5976-2.5984" (65.979-66.000 MM)
Main:
Main:
Comments:
NON-TURBO, DIESEL
151
4D56
357

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
4 Cylinders
2.5
151
2.6
156
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, 2BC, MONTERO, P/UP, MECH CAM
MITSUBISHI
2.6
156
3.5866-3.5878" (91.100-91.130 MM)
MONTERO
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, 2BC, MONTERO, P/UP, HYD LIFTER
83-85
MONTERO
86-90
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
Stroke: 3.858" (97.993 MM)

Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.150" (80.01 MM)
Rear Seal Diameter:
G52, G54
Casting Numbers:
Comments:
SOHC, EFI OR 2BC, INDUSTRIAL THRUST WASHER LENGTH: 1.219
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
2.6
156
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, EFI, TURBO, MECH CAM
MITSUBISHI
MITSUBISHI
2.6
2.6
156
156
MITSUBISHI
2.6
83-89
86-89
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
156
3.5875" (91.123 MM)

.094" (2.388 MM)
.094
1.221 @ #3
STARION
84-85
3.5875" (91.123 MM)

Stroke: 3.858" (97.993 MM)
Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.221 @ #3
Main:
Thrust Width:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, MFI, TURBO, STARION, MECH CAM THRUST WASHER LENGTH: 1.219
MITSUBISHI
2.6
156
4G54
83-85
Stroke: 3.858" (97.993 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, EFI, TURBO, HYD LIFTER
4G54
3.5875" (91.123 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.221 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
MITSUBISHI
(cont.)
4D56-T
Stroke: 3.740" (95.000 MM)

Cyl Bore:
2.0858-2.0866" (52.980-53.000 MM)
Rods:
2.5976-2.5984" (65.980-66.000 MM)
Main:
Main:
TURBO DIESEL HARDENED TURBO SHAFT GRINDING
Comments:
MITSUBISHI
Engine Model
STARION
86-87
3.5875" (91.123 MM)

Stroke: 3.858" (97.993 MM)
Cyl Bore:
2.0858-2.0866" (52.979-53. MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.221 @ #3
Main:
Thrust Width:
3.150" (80.01 MM)
Rear Seal Diameter:
G54
Casting Numbers:
Comments:
SOHC, MFI, TURBO, STARION, HYD LIFTER THRUST WASHER LENGTH: 1.219
358
4G54

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
4 Cylinders
2.6
159
2.8
173
3.3
4M40
201
3.3
203
3.3
3.9
203
4.3
S4S
238
S4S-D & S4S-D

3.7008-3.7022" (94.000-94.035 MM)
.112-.128" (2.800-3.200 MM)
.112-.128" (2.800-3.200 MM)
4D34T
92-94
4.0945-4.0960" (104.-104.038 MM)
Thrust Width:
1.375-1.379"
259
S4K
S4K & S4K-T

4.0157-4.0171" (101.999-102.034 MM)
.120" (3.048 MM)
.120" (3.048 MM)
1.2992-1.3007" @ #4
MITSUBISHI
6 Cylinders
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Internal
Main:
Balance:
72, E1, P1, TDC
Casting Numbers:
Comments:
3000GT
Cyl Bore:
91-92
3.587" (91.11 MM)
DOHC, MFI, TWIN TURBO, 3000GT
MITSUBISHI
3.0
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
72, E1, P1, TDC
Casting Numbers:
Comments:
DOHC, MFI, 3000GT, DIAMANTE
181
4D34T
Cyl Bore:
Stroke: 5.1181" (130.000 MM)

Cyl Bore:
2.3600-2.3608" (59.944-59.964 MM)
Rods:
Rod Fillet:
3.5410-3.5420" (89.941-89.967 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL, DIR INJ, OHV, WATER COOLED, USED BY CAT
MITSUBISHI
4D31T
1.375-1.379
S4S-D
Stroke: 4.5276" (115.001 MM)

2.5561- 2.5571" (64.925-64.95 MM)
Rods:
3.0678-3.0688" (77.922-77.948 MM)
Main:
Main:
Comments:
TURBO DIESEL
MITSUBISHI
87-92
3.9370-3.9382" (100.-100.03 MM)
3.7008-3.7022" (94.000-94.035 MM)

.112-.128" (2.800-3.200 MM)
.112-.128" (2.800-3.200 MM)
Stroke: 4.724" (120.000 MM)

Cyl Bore:
2.2817-2.2823" (57.955-57.970 MM)
Rods:
Rod Fillet:
3.0691-3.0697" (77.955-77.970 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, DIR INJ, H2O COOLED, S4S-DT, TORO MOWER
MITSUBISHI
4M40
S4S
Stroke: 4.7244" (120.000 MM)

Cyl Bore:
2.2817-2.2823" (57.955-57.970 MM)
Rods:
Rod Fillet:
3.0691-3.0697" (77.955-77.970 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL,CAT FORKLIFT DP30 D,TORO MOWER, SWIRL CHMBR
MITSUBISHI
97-00
3.7402" (95.000 MM)
4D31T
Stroke: 4.134" (105.004 MM)

Cyl Bore:
2.3599-2.3608" (59.941-59.964 MM) *
Rods:
3.0678-3.0688" (77.922-77.948 MM)
Main:
Main:
Thrust Width:
Comments:
FE TURBO DIESEL TRUCK * ALSO 2.5570" (64.9500 MM)
MITSUBISHI
S4E
3.701" (94.005 MM)
.120" (3.048 MM)
.120
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.937" (100.000 MM)

Cyl Bore:
2.1248-2.1260 (53.970-54.000 mm)
Rods:
2.6772" (68.000 MM)
Main:
Main:
Comments:
TURBO DIESEL * #3 MAIN CLEARANCE=.0024-.0031" (.060-.080 MM)
MITSUBISHI
(cont.)
S4E
Stroke: 3.701" (94.005 MM)

2.2813-2.2822" (57.945-57.968 MM)
Rods:
2.9508-2.9516" (74.95-74.971 MM)
Main:
Main:
DIESEL
Comments:
MITSUBISHI
Engine Model
3000GT
Cyl Bore:
359
91-94
3.587" (91.11 MM)

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
6 Cylinders
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
AD
Casting Numbers:
Comments:
3000GT
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
93-98
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906" @ #3
DOHC, 60V6, NON TURBO, 3000 GT, DIMANTE OIL PUMP GEAR DIA 1.610, FLAT 1.500
MITSUBISHI
3.0
181
3000GT
93-98
3.5866-3.5878" (91.1-91.13 MM)

Stroke: 2.992" (75.997 MM)
Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
.059" (1.499 MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
.059" (1.499 MM)
Main:
Main Fillet:
.905-.906 @ #3
Main:
Thrust Width:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
72, E1, P1, TDC
Casting Numbers:
Comments:
DOHC, MFI, TWIN TURBO, 3000 GT OIL PUMP GEAR DIA 1.610, FLAT 1.500
MITSUBISHI
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
#1 2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
19N, T3A, T3B, T3D, T3E, T3L
Casting Numbers:
Comments:
SOHC, MFI, 12 VALVE, DIMANTE, MONTERO
FLAT= 1.500
MITSUBISHI
3.0
181
DIMANTE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.0
181
GALANT
Stroke: 2.990" (76.000 MM)

2.0000" (50.000 MM)
Rods:
2.4000" (60.000 MM)
Main:
Main:
Comments:
SOHC, 12 VALVE, MONTERO & SPORT
MITSUBISHI
Stroke:
Rods:
3.0
2.992" (76.000 MM)

1.9670-1.9674" (49.961-49.971 MM)
181
6G72
OIL PUMP GEAR DIA= 1.610
Stroke: 2.992" (75.997 MM)

Cyl Bore:
1.9677-1.9685" (49.98-50. MM)
Rods:
Rod Fillet:
2.3614-2.3622" (59.98-60. MM)
Main:
Main Fillet:
Main:
Thrust Width:
09N, 19N, 29, 72, 76, 79, T3A, T3B, T3C, T3D, T3E, T3F, T3L
Casting Numbers:
Comments:
SOHC, MFI, RWD, MONTERO, P/UP, GALANT THRUST ON #3 MAIN
MITSUBISHI
93-96
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906 @ #3
MONTERO
Cyl Bore:
89-94
95-03
3.587" (91.100 MM)
.8300" (21.082 MM)

Rod Width:
2.3611-2.3622" (59.971-59.999 MM)
Main:
.9060" @ #3 (25.430 MM)
Main:
Thrust Width:
Balance: Internal
1.4560" (36.982 MM)
3.5820" (90.982 MM)
Rear Seal Diameter:
09N, 19N, 29, 72, 76, 79, T3A, T3D, T3F, T3G, T3L
Casting Numbers:
Comments:
SOHC 24 V ECLIPSE 95-03 MONTERO 1997 VIN P 1997&8 1994-1997 RELUCTOR RING DIAMETER 6.9370"
(176.199 MM), 1998-2003 RELUCTOR RING DIAMETER 7.2500" (184.150 MM).
360
6G72
3.590" (91.100 MM)
MONTERO
Cyl Bore:
88-92
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
@ #3
6G72

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
6 Cylinders
3.0
181
Stroke: 2.992" (75.997 MM)

1.9677-1.9685" (49.98-50. MM)
Rods:
2.3614-2.3622" (59.98-60. MM)
Main:
Main:
Balance: Internal
1.445" (36.703 MM)
3.582" (90.983 MM)
Rear Seal Diameter:
19N, 29, 72, 76, 79, T3A, T3B, T3C, T3E, T3F
Casting Numbers:
Comments:
Engine Model
(cont.)
87-91
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5866-3.5878" (91.1-91.13 MM)

.059" (1.499 MM)
.059" (1.499 MM)
.905-.906 @ #3
SOHC OIL PUMP GEAR DIAMETER:1.610, FLAT:1.500
MITSUBISHI
3.5
213
MONTERO
Stroke: 3.378" (85.801 MM)

Cyl Bore:
2.1646-2.1653" * (54.981-54.999 MM)
Rods:
2.5190-2.5197" * (63.983-64. MM)
Main:
Main:
Comments:
DOHC, MFI, 24 VALVE, MONTERO SR * 3 STD DIAMETERS
MITSUBISHI
3.5
213
MONTERO
Stroke: 3.378" (85.800 MM)

Cyl Bore:
2.1646-2.1654" (54.982-55.000 MM)
Rods:
2.5190-2.5197" (63.982-64.000 MM)
Main:
Main:
Thrust Width:
Balance: Internal
1.4566" (37.000 MM)
3.5826" (91.000 MM)
Rear Seal Diameter:
74
Casting Numbers:
Comments:
SOHC, 24 VALVE, MONTERO XLS, MONTERO SPORT
MITSUBISHI
3.5
MITSUBISHI
97-04
6G74
@ #3
94-97
3.661" (93.000 MM)
Cyl Bore:
3.9
6G74DN
3.661" (93.000 MM)
213
Stroke: 3.378" (85.800 MM)

2.1654" (55.000 MM)
Rods:
2.5197" (64.000 MM)
Main:
Main:
Comments:
DOHC, 60r V-6
94-96
3.6610" (92.989 MM)
239
S6E
S6E
3.7008-3.7022" (94.-94.036 MM)

Stroke: 3.701" (94.005 MM)
Cyl Bore:
2.2813-2.2822" (57.945-57.968 MM)
.110-.126" (2.794-3.2 MM)
Rods:
Rod Fillet:
2.9508-2.9516" (74.95-74.971 MM)
.120
Main:
Main Fillet:
Main:
Comments:
DIESEL, OHV THRUST BRG WIDTH .0965", STD. MAIN BEARING SHELL THICKNESS .0785"
MITSUBISHI
4.0
243
Stroke: 3.937" (100. MM)

2.2835" (58.001 MM)
Rods:
2.7559 *" (70. MM)
Main:
Main:
Comments:
DIESEL * UNDERSIZE BRGS AVLBL .010,.020,.030
MITSUBISHI
4.4
6DR51A
** O.S. THRUST PLATES AVLBL .006,.012,.018
271
S6E2
Stroke: 3.859" (98.019 MM)

Cyl Bore:
2.2813-2.2822" (57.945-57.968 MM)
Rods:
Rod Fillet:
2.9508-2.9516" (74.95-74.971 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, OHV THRUST WASHER THICKNESS IS .096" (2.45MM) EACH
MITSUBISHI
4.9
300
Stroke: 4.134" (105.004 MM)

2.3598-2.3609" (59.939-59.967 MM)
Rods:
#1 3.0678-3.0688" (77.922-77.948 MM)
Main:
Main:
Comments:
6D310AT TURBO
MITSUBISHI
4.9
MITSUBISHI
5.0
S6E2
3.8583-3.8596" (98.001-98.034 MM)
.120" (3.048 MM)
.120
6D310AT
301
90-92
6D310AT
3.900" (99.06 MM)
Cyl Bore:
Stroke: 4.134" (105.004 MM)

2.3600-2.3608" (59.944-59.964 MM)
Rods:
3.0690-3.0700" (77.953-77.978 MM)
Main 1:
Main:
STROKE
--- 4.134" (105.004 MM)
Main 4:
Comments:
TURBO DIESEL
6DR51A
3.622" (91.999 MM)

.118" (2.997 MM)
Cyl Bore:
Rod Fillet:
6D31T
89-93
Cyl Bore:
3.9370-3.9380" (100.-100.025 MM)
Thrust Width:
1.375-1.379"
305
6D31T
S6S
Stroke: 4.7244" (120.000 MM)

Cyl Bore:
2.2817-2.2823" (57.955-57.970 MM)
Rods:
Rod Fillet:
3.0691-3.0697" (77.955-77.970 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, USED IN CATERPILLAR & TORO, SWIRL CHMBR
361
S6S
3.7008-3.7022" (94.000-94.035 MM)
.112-.128" (2.800-3.200 MM)
.112-.128" (2.800-3.200 MM)

Make
Liter
CID
Vin
Model
Year
MITSUBISHI
MITSUBISHI
6 Cylinders
5.0
305
S6S-D
Stroke: 4.724" (120.000 MM)

Cyl Bore:
2.2817-2.2823" (57.955-57.970 MM)
Rods:
Rod Fillet:
3.0691-3.0697" (77.955-77.970 MM)
Main:
Main Fillet:
Main:
DIESEL,DIR INJ,H2O COOLED,TORO MOWER,S6S-DT
Comments:
MITSUBISHI
5.4
331
Stroke: 4.7244" (120. MM)

2.3622" (60. MM)
Rods:
3.0710" (78.003 MM)
Main:
Main:
Comments:
DIESEL
MITSUBISHI
5.9
MITSUBISHI
6.6
MITSUBISHI
Stroke:
Rods:
MITSUBISHI
6.9
7.5
11.2
6D34T
6D14
4.3307" (110. MM)
6D142A
6D142A
74-86
6D15
4.4488" (113. MM)

.165" (4.191 MM)
1.457" (37.008 MM)
.165
6D16
680
75-89
4.3301" (109.985 MM)

.165" (4.191 MM)
1.457" (37.008 MM)
.165
1.460
6D15
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
87-88
6D16
4.6457" (118.001 MM)

.165" (4.191 MM)
1.457" (37.008 MM)
.165
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
3.1472-3.1480" (79.939-79.959 MM)

Main:
Main:
Comments:
DIESEL
MITSUBISHI
6D14
460
4.5276" (115.001 MM)

2.5561-2.5569" (64.925-64.945 MM)
95-00
4.0914-4.0957" (104.000-104.030 MM)
422
4.528" (115.011 MM)

2.5561-2.5569" (64.925-64.945 MM)
MITSUBISHI
6D34T
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.1472-3.1480" (79.939-79.959 MM)

Main:
Main:
Comments:
DIESEL INDUSTRIAL CRANE, KOBELCO
Stroke:
Rods:
1.378
406
#1 3.1472-3.1480" (79.939-79.959 MM)

Main:
Main:
32T
Casting Numbers:
Comments:
FK-415 FUSO TRUCK
Stroke:
Rods:
Thrust Width:
Cyl Bore:
6.7
6DS7
3.8583" (98.001 MM)
400
4.528" (115.011 MM)

2.5561-2.5569" (64.925-64.945 MM)
S6S-D & S6S-D
6DS7
Cyl Bore:
Stroke: 4.5276" (115.001 MM)

2.5567" (64.94 MM)
Rods:
3.1478" (79.954 MM)
Main:
Main:
Comments:
DIESEL
(cont.)
3.7008-3.7022" (94.000-94.035 MM)

.112-.128" (2.800-3.200 MM)
.112-.128" (2.800-3.200 MM)
Cyl Bore:
357
Stroke: 4.528" (115.000 MM)

2.5566-2.5574" (64.938-64.958 MM)
Rods:
3.0681-3.0688" (77.930-77.948 MM)
Main:
Main:
Comments:
DIESEL, FH TRUCK, 211 TURBO
Engine Model
6D22
92-95
6D22
5.1187-5.1202" (130.015-130.053 MM)

Stroke: 5.512" (140.005 MM)
Cyl Bore:
3.3035-3.3047" (83.909-83.939 MM)
Rods:
ALL 3.9319-3.9330" (99.87-99.898 MM)
Main:
1.2992" (30.000 MM)
Main:
Thrust Width:
42T
Casting Numbers:
Comments:
6D22 & 6D22T, 6 HEADS, DIRECT INJ, DIESEL * INSTALL GEAR HEAT TO 212F (100C)
MURPHY
MURPHY
1 Cylinder
0.8
46
Stroke: 4.130" (104.902 MM)

2.2815-2.2822" (57.95-57.968 MM)
Rods:
2.5571-2.5578" (64.95-64.968 MM)
Main:
Main:
DIESEL, 4-STROKE, DIRECT INJ, AIR COOLED
Comments:
D302-1
Cyl Bore:
362
3.740" (94.996 MM)
D302-1

Make
Liter
CID
Vin
Model
Year
MURPHY
MURPHY
2 Cylinders
1.5
91
D202-2
Stroke: 4.130" (104.902 MM)

Cyl Bore:
2.2815-2.2822" (57.95-57.968 MM)
Rods:
2.5571-2.5578" (64.95-64.968 MM)
Main:
Main:
Thrust Width:
DIESEL,4-STROKE,D/I,LIQUID COOL,D302-2 IS AIR COOL
Comments:
MURPHY
1.9
115
1.9
2.1
115
127
2.1
D327-2 LG CRA
D327-2
D327-2 SM CRA
3.940" (100.076 MM)
@ REAR
D226-2
Stroke: 4.720" (119.888 MM)

Cyl Bore:
2.4784-2.4791" (62.951-62.969 MM)
Rods:
2.7540-2.7547" (69.952-69.969 MM)
Main:
Main:
Comments:
DIESEL, LARGE CRANK,D/I,LIQUID COOLED,10 DIGIT ENG
MURPHY
@ REAR
3.940" (100.076 MM)
Stroke: 4.720" (119.888 MM)

Cyl Bore:
2.2815-2.2823" (57.95-57.97 MM)
Rods:
2.5572-2.5578" (64.953-64.968 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, SMALL CRANK, D/I,AIR COOLED,9 DIGIT ENGINE
MURPHY
127
D226-2 LG CRA
4.130" (104.902 MM)
D226-2
Stroke: 4.720" (119.888 MM)

Cyl Bore:
2.2815-2.2823" (57.95-57.97 MM)
Rods:
2.5572-2.5578" (64.953-64.968 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, SMALL CRANK, D/I,LIQUID COOLED,9 DIGIT ENG
D226-2 SM CRA
4.130" (104.902 MM)
@ REAR
MURPHY
MURPHY
3 Cylinders
2.2
136
D202-3
Stroke: 4.130" (104.902 MM)

Cyl Bore:
2.2815-2.2822" (57.95-57.968 MM)
Rods:
2.5571-2.5578" (64.95-64.968 MM)
Main:
Main:
Thrust Width:
DIESEL, 4-STROKE,D/I,LIQUID COOL,& D302-3 AIR COOL
Comments:
@ REAR
3 Cylinders
2.9
177
D229-3
Stroke: 4.7244" (120.000 MM)

Cyl Bore:
2.2815-2.2823" (57.951-57.970 MM)
Rods:
Rod Fillet:
2.5571-2.5579" (64.951-64.970 MM)
Main:
Main Fillet:
Main:
Thrust Width:
DIESEL,4 STROKE,DIR INJ,VERTICAL,MADE IN BRAZIL
Comments:
D229-3
4 Cylinders
2.8
171
SPRINT
Stroke: 4.055" (103.000 MM)

Cyl Bore:
2.1646-2.1654" (54.981-55.000 MM)
Rods:
Rod Fillet:
2.7552-2.7559" (69.981-70.000 MM)
Main:
Main Fillet:
Main:
Thrust Width:
DIESEL,4 STROKE,TURBO & AFTERCOOLER,MADE IN BRAZIL
Comments:
MWM
00-05
4.0157-4.0166" (102.000-102.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
1.4110-1.4126" (35.840-35.880 MM)
MWM
MWM
D202-3, D302-3
3.740" (94.996 MM)
MWM
MWM
D202-2, D302-2
3.740" (94.996 MM)
D327-2
Stroke: 4.720" (119.888 MM)

Cyl Bore:
2.4784-2.4791" (62.951-62.969 MM)
Rods:
2.7540-2.7547" (69.952-69.969 MM)
Main:
Main:
Comments:
DIESEL, LARGE CRANK,D/I,AIR COOLED,10 DIGIT ENGINE
MURPHY
Engine Model
3.9
239
Stroke: 4.7244" (120.000 MM)

2.2815-2.2823" (57.951-57.970 MM)
Rods:
2.5571-2.5579" (64.951-64.970 MM)
Main:
Main:
Comments:
DIESEL,4 STROKE,DIR INJ,MADE IN BRAZIL
D229-4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
363
00-05
4.07T & 4.07TC
3.6614-3.6623" (93.000-93.022 MM)

.130-.138"
.130-.138"
1.1811-1.1850"
00-05
D229-4
4.0157-4.0166" (102.000-102.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
1.4110-1.4126" (35.840-35.880 MM)

Make
Liter
CID
Vin
Model
Year
MWM
MWM
4 Cylinders
3.9
239
Stroke: 4.7244" (120.000 MM)

2.4784-2.4791" (62.951-62.970 MM)
Rods:
2.7540-2.7547" (69.951-69.970 MM)
Main:
Main:
DIESEL, TURBO, DIRECT INJ, MADE IN BRAZIL
Comments:
MWM
4.3
TD229-4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
262
4.2
256
5.9
SPRINT
359
Stroke: 4.7244" (120.000 MM)

2.2815-2.2823" (57.951-57.970 MM)
Rods:
2.5571-2.5579" (64.951-64.970 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ, 4 STROKE, MADE IN BRAZIL
5.9
359
6.4
394
0.8
52
D229-6
00-05
TD229-6
4.0157-4.0166" (102.000-102.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
1.409-1.414" (35.790-35.915 MM)
00-05
4.0551-4.0560" (103.000-103.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
1.0
1.1
60
244
65
244
2.8740-2.8752" (73.000-73.030 MM)
254
99
254
2.9921-2.9933" (76.000-76.030 MM)
Cyl Bore:
Stroke: 3.937" (100. MM)

2.0831-2.0839" (52.911-52.931 MM)
Rods:
2.7913-2.7921" (70.899-70.919 MM)
Main:
Main:
SD16
Casting Numbers:
Comments:
274, 284 DIESEL, NISSAN SD-16 ENGINE
234
2.6772-2.6783" (68.000-68.030 MM)
Cyl Bore:
Stroke: 3.071" (78.000 MM)

1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
DIESEL, 254 TRACTOR, 24 HP
1.6
234
Cyl Bore:
Stroke: 3.071" (78.000 MM)

1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
NAVISTAR
00-05
3 Cylinders
Stroke: 3.071" (78.000 MM)

1.6535" (42.000 MM)
Rods:
2.0472" (52.000 MM)
Main:
Main:
Comments:
NAVISTAR
6.07T & 6.07TC
4.0157-4.0166" (102.000-102.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
1.4110-1.4126" (35.840-35.880 MM)
10 SERIES
NAVISTAR
NAVISTAR
00-05
TD229-6
Stroke: 5.079" (129.000 MM)

Cyl Bore:
2.4784-2.4791" (62.951-62.970 MM)
Rods:
Rod Fillet:
3.3835-3.3844" (85.942-85.964 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, NATURALLY ASPIRATED & TURBO,MADE IN BRAZIL
NAVISTAR
10 SERIES
3.6614-3.6623" (93.000-93.022 MM)

.130-.138" (3.300-3.500 MM)
.130-.138" (3.300-3.500 MM)
1.1811-1.1850" (30.000-30.100 MM)
D229-6
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.7244" (120.000 MM)

Cyl Bore:
2.4784-2.4791" (62.951-62.970 MM)
Rods:
Rod Fillet:
2.7540-2.7547" (69.951-69.970 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL,TURBO,& TBD229-6 AFTERCOOLER,MADE IN BRAZIL
MWM
00-05
6 Cylinders
Stroke: 4.0551" (103.000 MM)

Cyl Bore:
2.1646-2.1654" (54.981-55.000 MM)
Rods:
Rod Fillet:
2.7552-2.7559" (69.981-70.000 MM)
Main:
Main Fillet:
Main:
Thrust Width:
DIESEL,4 STROKE,TURBO & AFTERCOOLER,MADE IN BRAZIL
Comments:
MWM
TD229-4
4.0551-4.0560" (103.000-103.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
MWM
MWM
(cont.)
4.0157-4.0166" (102.000-102.022 MM)

.150-.157" (3.800-4.000 MM)
.150-.157" (3.800-4.000 MM)
1.409-1.414" (35.790-35.915 MM)
10 SERIES
Stroke: 5.0790" (129.000 MM)

Cyl Bore:
2.4784-2.4791" (62.951-62.970 MM)
Rods:
Rod Fillet:
3.3835-3.3844" (85.942-85.964 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL,NAT'L ASPIRATED & TURBO, MADE IN BRAZIL
MWM
00-05
Engine Model
274
Cyl Bore:
Thrust Width:
364
SD-16
3.2669-3.2693" (82.979-83.04 MM)
@#3

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
Stroke:
Rods:
3 Cylinders
2.5
155
D155
Engine Model
(cont.)
385
4.375" (111.125 MM)

2.5185-2.5193" (63.97-63.99 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
D155
3.8750-3.8759" (98.425-98.448 MM)
.224-248" (5.69-6299.2 MM)
1.730-1.734" (43.942-44.044 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445"
#1 3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
0, 0, 0, 0, 0, 0, 305950R1, 43734DC, 43734DCX, 43734DEX, 43734DF, 43734DFY, 43734DG, 43734DHX,
Casting Numbers:
43739
385 TRACTORS
Comments:
NAVISTAR
Stroke:
Rods:
2.9
179
454
5.059" (128.499 MM)

2.5185-2.5193" (63.97-63.99 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 3.1485-3.1492" (79.972-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
3059510R1, 313295632, 3132956R, 3132956R3
Casting Numbers:
Comments:
DIESEL, D179, 454, 464, 484, 485 TRACTORS
D179
3.8750-3.8759" (98.425-98.448 MM)
.224-.248" (5.69-6.299 MM)
1.730-1.734" (43.942-44.044 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445
NAVISTAR
NAVISTAR
4 Cylinders
1.0
60
U & UC
C60
2.625" (66.675 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.4980-1.4990" (38.049-38.075 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
1.6230-1.6240" (41.224-41.25 MM)
Main:
1.189"
Main:
Thrust Width:
Balance: Internal
251264R, 251264R1, 257264R1, 351264R1, 357247, 357247R1, 357264, 527456R1
Casting Numbers:
Comments:
U, UC, U1, CUB, C60 GAS
NAVISTAR
Stroke:
Rods:
1.2
71
284
2.9921" (75.999 MM)

1.7693-1.7699" (44.94-44.955 MM)
2.2025-2.2031" (55.944-55.959 MM)

Main:
Main:
Comments:
284 GAS, TOYO-KOGYO M471G ENGINE
NAVISTAR
1.9
M471G
Cyl Bore:
2.7559" (70. MM)
Rod Width:
.9646-.9666" (24.501-24.552 MM)
Thrust Width:
1.142-1.144 @#5
113
37-40
C113
3.000" (76.2 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7490-1.7500" (44.425-44.45 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.1240-2.1250" (53.95-53.975 MM)
Main:
1.8460 @ #3
Main:
Thrust Width:
251172R1, 30926D, 30928DA, 356308, 356308R1, 365308R1, 368711R1, 46402D, 46402DB
Casting Numbers:
Comments:
C113, A, AV, B, BN, C, F12, F14, W12, W14 TRACTORS
NAVISTAR
2.0
123
SUPER C
SUPER C
3.125" (79.375 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7490-1.7500" (44.425-44.45 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.1240-2.1250" (53.95-53.975 MM)
Main:
1.8460 @ #3
Main:
Thrust Width:
3.6250" (92.075 MM)
Rear Seal Diameter:
356308, 356308R, 356308R1, 356308R1, 365308R1, 368711R, 368711R1, 46402D
Casting Numbers:
Comments:
GAS, 100, 200, SUPER C TRACTOR SERIES
NAVISTAR
2.2
132
FL
F-12
3.250" (82.55 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7490-1.7500" (44.425-44.45 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.1240-2.1250" (53.95-53.975 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.5000"
Main:
Thrust Width:
356308R1, 365308R1, 367747R1, 368711R1, 46402D, BB-14K, BD-14A, BD-14K, K-24504D
Casting Numbers:
Comments:
F-12
365
F-12

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
Year
4 Cylinders
2.2
135
C(1)
Engine Model
(cont.)
2404
2404
3.250" (82.55 MM)

Stroke: 4.063" (103.2 MM)
Cyl Bore:
1.8090-1.8100" (45.949-45.974 MM)
Rods:
2.2440-2.2450" (56.998-57.023 MM)
Main:
1.630 @ CENTER
Main:
Thrust Width:
GAS, 330, 340, 404, 2404, SERIAL #100500 & UNDER UNDER SERIAL #100500
Comments:
NAVISTAR
2.2
135
C(2)
2404
2404
3.250" (82.55 MM)

Stroke: 4.063" (103.2 MM)
Cyl Bore:
2.0590-2.060" (52.299-52.324 MM)
.093" (2.362 MM)
Rods:
Rod Fillet:
2.6235-2.6245" (66.637-66.662 MM)
.093" (2.362 MM)
Main:
Main Fillet:
1.630" @ CENTER
Main:
Thrust Width:
367747R, 367747R1, 375600R1
Casting Numbers:
Comments:
GAS,330, 340,404,2404 TRACTORS,SERIAL #100501 & UP OVER SERIAL #100501
NAVISTAR
2.3
144
G(1)
354
Stroke: 4.063" (103.2 MM)

Cyl Bore:
2.0590-2.0600" (52.299-52.324 MM)
Rods:
Rod Fillet:
#1 2.6235-2.6245" (66.637-66.662 MM)
Main:
Main Fillet:
3.625" (92.075 MM)
Main:Seal Diameter:
Rear
Comments:
GAS, B 414, 354 FARMALL TRACTORS 424 TRACTOR
NAVISTAR
2.3
144
B275
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.0590-2.0600" (52.299-52.324 MM)
Rods:
Rod Fillet:
#1 2.6235-2.6245" (66.637-66.662 MM)
Main:
Main Fillet:
3.625" (92.075 MM)
Main:Seal Diameter:
Rear
367747R1, 703864R
Casting Numbers:
Comments:
B275 BRITISH DIESEL TRACTOR, B414 B-414 TRACTOR
NAVISTAR
2.3
146
2.5
152
2424
2.5
C146
3.375" (85.725 MM)
7/64 (.109)
7/64 (.109)
C152
Stroke: 4.250" (107.95 MM)

Cyl Bore:
2.2475-2.2485" (57.087-57.112 MM)
Rods:
2.4975-2.4985" (63.437-63.462 MM)
Main:
Main:
43734DB
Casting Numbers:
Comments:
GAS,H, HV, O4,OS4,W4,4 SERIES TRACTORS,C152 ENGINE
NAVISTAR
B414
3.375" (85.725 MM)
7/64 (.109)
7/64 (.109)
Stroke: 4.063" (103.2 MM)

Cyl Bore:
2.0590-2.0600" (52.299-52.324 MM)
Rods:
Rod Fillet:
#1 2.6235-2.6245" (66.637-66.662 MM)
Main:
Main Fillet:
3.625" (92.075 MM)
Main:Seal Diameter:
Rear
375600R, 375600R1
Casting Numbers:
Comments:
GAS, 424, 2424 TRACTORS, C146 ENGINE 424 TRACTOR
NAVISTAR
B414
3.375" (85.725 MM)
7/64 (.109)
7/64 (.109)
3.3750" (85.725 MM)
152
61-68
3.875" (98.425 MM)

Stroke: 3.219" (81.763 MM)
Cyl Bore:
2.3730-2.3740" (60.274-60.3 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.7484-2.7494" (69.809-69.835 MM)
.109" (2.769 MM)
Main:
Main Fillet:
1.0610"
Main:
Thrust Width:
365712R2, 43734D, 43734DB, 43734DC, 43734DD, 60889HC, 836712R2, 863712R1
Casting Numbers:
Comments:
SCOUT
NAVISTAR
2.5
153
2504
2504
3.3750-3.3760" (85.725-85.75 MM)

Stroke: 4.250" (107.950 MM)
Cyl Bore:
2.0590-2.0600" (52.299-52.324 MM)
Rods:
2.6235-2.6245" (66.637-66.662 MM)
Main:
@ CENTER
Main:
Thrust Width:
375501R2, 375601, 375601R, 375601R1
Casting Numbers:
Comments:
GAS,444, 504,2444, 2504 TRACTORS * LATER ENGINES: 2.6235-2.6245 & 2.0590-2.0600
NAVISTAR
2.5
154
2424
3.500" (88.9 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7495-1.7500" (44.437-44.45 MM)
Rods:
2.1240-2.1250" (53.95-53.975 MM)
Main:
1.316 @ #5***
Main:
Thrust Width:
751303, 751303R2, 751303R3, 751303R5
Casting Numbers:
Comments:
DIESEL, 444, 2424 TRACTORS, BD154 *** LATER ENGINES HAVE THRUST LENGTH OF 1.500 OR 1.845"
366
BD154

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
4 Cylinders
2.6
157
C(1)
Stroke: 4.391" (111.531 MM)

2.0590-2.0600" (52.299-52.324 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
405859R1, 405959R1
Casting Numbers:
Comments:
(cont.)
454
454
3.375" (85.725 MM)
Cyl Bore:
GAS, 454 TRACTOR
NAVISTAR
2.6
164
Stroke: 4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
Rods:
2.5575-2.5585" (64.961-64.986 MM)
Main:
Main:
Comments:
GAS, 454 TRACTOR, SUPER H, HV, W4
NAVISTAR
Stroke:
Rods:
Main:
Main:
Engine Model
2.6
164
2.7
454
3.500" (88.9 MM)
Thrust Width:
@ #3
4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
2.5575-2.5585" (64.961-64.986 MM)
NAVISTAR
454
Cyl Bore:
3.563" (90.5 MM)
Cyl Bore:
164
3.500" (88.9 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.2975-2.2985" (58.357-58.382 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.5575-2.5585" (64.961-64.986 MM)
Main:
1.9790
Main:
Thrust Width:
308397R31, 318264R1, 375601R11, 43734D, 43734DC, 43734DCX, 43734DEX, 43734DF, 43734DFY,
Casting Numbers:
43734DG, 43734DHX, 43739
Comments:
GAS
NAVISTAR
2.7
166
340
Stroke: 3.8750" (98.425 MM)

Cyl Bore:
2.3730-2.3740" (60.274-60.3 MM)
Rods:
Rod Fillet:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main Fillet:
Main:
Thrust Width:
308397R, 308397R1, 308397R31, 318264R1, 375601R11
Casting Numbers:
Comments:
DIESEL, 340 TRACTOR
NAVISTAR
2.7
169
C(1)
Stroke: 4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
Rods:
2.5575-2.5585" (64.961-64.986 MM)
Main:
Main:
Comments:
GAS & LP, FARMALL H, 300, 300HC, 300 UTILITY
NAVISTAR
2.7
169
NAVISTAR
2.8
C(1)
2.8
175
NAVISTAR
2.8
Stroke: 4.391" (111.531 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
397817
Casting Numbers:
Comments:
GAS, LATE 464 TRACTORS
350, 350H, 350HC
Thrust Width:
@ CENTER
464
C.
EARLY 464
3.625" (92.075 MM)
464
Cyl Bore:
367
FARMALL H, 35
3.625" (92.075 MM)
Cyl Bore:
175
C&U
3.563" (90.5 MM)
Cyl Bore:
Stroke: 4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
Rods:
2.5575-2.5585" (64.961-64.986 MM)
Main:
Main:
Comments:
EARLY 464, 2400 TRACTORS
@ CENTER
C&U
Cyl Bore:
175
FARMALL H, 30
3.5619-3.5635" (90.472-90.513 MM)
Thrust Width:
Stroke: 4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
Rods:
2.5575-2.5585" (64.961-64.986 MM)
Main:
Main:
43734DH
Casting Numbers:
Comments:
GAS & LP, FARMALL H, 350, 350HC, 350 UTILITY
NAVISTAR
300, 300HC
Cyl Bore:
Stroke: 4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
Rods:
2.5575-2.5585" (64.961-64.986 MM)
Main:
Main:
Comments:
GAS, C & U
340
3.6875" (93.663 MM)
.109" (2.769 MM)
.109" (2.769 MM)
1.516 @ CENTER
LATE 464
3.562" (90.475 MM)

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
Stroke:
Rods:
Main:
Main:
4 Cylinders
2.8
175
3.0
Stroke: 4.3906" (111.521 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
308397R31, 318264R, 318264R1, 375601R11
Casting Numbers:
Comments:
DIESEL, 504 FARMALL & 2504 TRACTORS
NAVISTAR
3.1
193
3.2
196
3.3
200
3.4
206
3.6
221
3.8
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.1245-4.1272" (104.762-104.831 MM)

.109" (2.769 MM)
.141" (3.581 MM)
1.0610 @ #3
80-83
544
3.8120-3.8130" (96.825-96.85 MM)
Thrust Width:
1.515 @ #2
584
F20
F20
D239
D206
3.8750-3.8758" (98.425-98.445 MM)
.224-.248" (5.69-6.299 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445
37-39
F20
3.750" (95.25 MM)
Cyl Bore:
239
544,574,674
Cyl Bore:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 5.000" (127. MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
BALL BEARINGS
Main:
Main:
Comments:
F20 TRACTOR
NAVISTAR
540
3.750" (95.25 MM)
D206
Stroke: 4.375" (111.125 MM)

2.5185-2.5193" (63.97-63.99 MM)
Rods:
#1 3.1484-3.1492" (79.969-79.99 MM)
Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
3132968R93, 32889R2, A339R2
Casting Numbers:
Comments:
584, 585 TRACTORS
NAVISTAR
540
Cyl Bore:
Stroke: 4.391" (111.531 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
397817
Casting Numbers:
Comments:
GAS, EARLY 544, 574, 674, 2504 TRACTORS
NAVISTAR
504
3.6875-3.6891" (93.663-93.703 MM)
.109" (2.769 MM)
.109" (2.769 MM)
1.516 @ CENTER
1/2V8
Stroke: 3.656" (92.862 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7484-2.7494" (69.809-69.835 MM)
Main:
Main:
Balance: External
Comments:
GAS, SCOUT
NAVISTAR
504
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.375" (111.125 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
Comments:
DIESEL, 350 FARMALL & 540 TRACTOR
NAVISTAR
(cont.)
3.625" (92.075 MM)
Cyl Bore:
188
Engine Model
4.250" (107.95 MM)

2.2975-2.2985" (58.357-58.382 MM)
2.5575-2.5585" (64.961-64.986 MM)
NAVISTAR
Year
544
D239
3.875" (98.425 MM)

Stroke: 5.059" (128.499 MM)
Cyl Bore:
2.5185-2.5193" (63.97-63.99 MM)
3/32 (.094")
Rods:
Rod Fillet:
#1 3.1484-3.1492" (79.969-79.99 MM)
9/64 (.141")
Main:
Main Fillet:
1.9790 @ #5
Main:
Thrust Width:
4.3299-4.3307" (109.979-110. MM)
Rear Seal Diameter:
Comments:
DIESEL, 544, 574, 674, 685 TRACTORS * INDUCTION,TUFFTRIDED,OR DEEP-NITROC HARDENED
THRUST LENGTH: 1.4429-1.4445
NAVISTAR
Stroke:
Rods:
3.9
5.0625" (128.588 MM)

2.5185-2.5193" (63.97-63.99 MM)
239
D239
544
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
D239
3.8750-3.8754" (98.425-98.435 MM)
.224-.248" (5.69-6.299 MM)
1.730-1.734" (43.942-44.044 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445"
1-4 3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
015C1, 015C1 1089, 182752R2, 1H625R2, 2744406R1, 3132752R3, 37CR4, IH625R2
Casting Numbers:
Comments:
DIESEL, 544, 574, 674, 685 TRACTORS
368

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
Stroke:
Rods:
3.9
246
(cont.)
D-246
D246
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
37CR4
Casting Numbers:
3.9375" (100.013 MM)

.224-.248" (5.69-6.299 MM)
1.730-1.734" (43.942-44.044 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445" (36.650-36.690 MM)
DIESEL
NAVISTAR
Stroke:
Rods:
Engine Model
4 Cylinders
5.0625" (128.588 MM)

2.5182-2.5193" (63.962-63.99 MM)
Comments:
Year
4.0
246
D-246
5.0590" (128.499 MM)

2.5185-2.5193" (63.97-63.99 MM)
3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
182752R2, 2744406R1, 3132752R3, 37CR4
Casting Numbers:
Comments:
NEUSS DIESEL, 784 TRACTORS
NAVISTAR
4.1
248
784
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Stroke: 5.250" (133.35 MM)

Cyl Bore:
2.4975-2.4985" (63.436-63.462 MM)
Rods:
Rod Fillet:
2.8075-2.8085" (71.311-71.336 MM)
Main:
Main Fillet:
Main:
Thrust Width:
45571DB, 45571DC
Casting Numbers:
Comments:
M TRACTORS, LATE GAS FROM SERIAL #278050,O6,OS6,W6
NAVISTAR
4.1
248
D246
3.8750-3.8759" (98.425-98.448 MM)
.224-.248" (5.69-6.299 MM)
1.730-1.734" (43.942-44.044 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445" (36.650-36.690 MM)
3.875" (98.425 MM)

7/64, .109" (2.768 MM)
9/64, .140" (3.556 MM)
@ #3
3.875" (98.425 MM)

Stroke: 5.250" (133.35 MM)
Cyl Bore:
3.2475-3.2485" (82.487-82.512 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 3.7475-3.7485" (95.187-95.212 MM)
Main:
2.2550" (57.277 MM)
Main:
Thrust Width:
261265DB, 261265R1, 261265R3, 261265R41, 46923D, 52010, 52010D, 52010DA, 61265R1
Casting Numbers:
Comments:
M, MD, MDV, ODS6, WD6, TD6, UD6, UD281 DIESEL
NAVISTAR
4.1
248
61-68
3.875" (98.425 MM)

Stroke: 5.250" (133.35 MM)
Cyl Bore:
2.3730-2.3740" (60.274-60.3 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 2.7484-2.7494" (69.809-69.835 MM)
.109" (2.769 MM)
Main:
Main Fillet:
1.0610
Main:
Thrust Width:
365712R2, 43734D, 43734DB, 43734DC, 43734DD, 45571DC, 60889HC, 836712R2, 863712R1
Casting Numbers:
Comments:
M TRACTOR, GAS
NAVISTAR
4.1
248
U6
Cyl Bore:
4.000" (101.6 MM)
2.5475-2.5485" (64.707-64.732 MM)

Rods:
2.8075-2.8085" (71.311-71.336 MM)
Main:
Main:
Comments:
LATE, FROM #278050
NAVISTAR
4.3
264
50-62
Stroke: 5.250" (133.35 MM)

Cyl Bore:
3.2475-3.2485" (82.487-82.512 MM)
Rods:
3.7475-3.7485" (95.187-95.212 MM)
Main:
Main:
261265R, 45571DD, 52010-D
Casting Numbers:
Comments:
DIESEL, SUPER MD, WD, MTA, W6TA, STARTS ON GAS
NAVISTAR
4.3
264
3.999" (101.575 MM)
T4, T6, T9, 656, SU
Stroke: 5.250" (133.35 MM)

Cyl Bore:
2.5475-2.5485" (64.707-64.732 MM)
Rods:
2.8075-2.8085" (71.311-71.336 MM)
Main:
Main Fillet:
Main:
Comments:
GAS,T4,T6,T9,656,SUPER M-ML-MV-MVL-W6-W6L TRACTORS
369
50-62
4.000" (101.6 MM)

.0020-.0030

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
Stroke:
Rods:
4 Cylinders
4.4
268
5.5000" (139.7 MM)

2.5185-2.5193" (63.97-63.99 MM)
510B
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
75-85
3.9370" (100. MM)
.224-.248" (5.69-6.299 MM)
1.6515-1.6555" (41.948-42.05 MM)
.1929-.2165" (4.894-5.499 MM)
1.4429- 1.4445" (36.650-36.690 MM)
3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.331-4.330" (110.007-109.982 MM)
Rear Seal Diameter:
218528R1, 218528R2, 218528R3, 3.218528R1, 528R2-79, AO9-7292
Casting Numbers:
Comments:
510B LOADER, NEUSS DIESEL, GERMAN BUILT
NAVISTAR
4.6
281
Stroke: 5.250" (133.35 MM)

2.5475-2.5485" (64.707-64.732 MM)
Rods:
2.8075-2.8085" (71.311-71.336 MM)
Main:
Main:
356308, 45571DC
Casting Numbers:
Comments:
GAS, ALSO U, 450 TRACTOR
NAVISTAR
4.6
281
D281
Stroke: 5.250" (133.35 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
3.7475-3.7485" (95.187-95.212 MM)
Main:
Main:
356308, 45571DC
Casting Numbers:
Comments:
DIESEL, 450, 450HC, W450
NAVISTAR
4.7
4.7
284
5.5
450
1020
D281
4.125" (104.775 MM)
1020
284
1020
4.250" (107.95 MM)
Cyl Bore:
F30
Stroke: 5.000" (127. MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
BALL BEARING
Main:
Main:
Comments:
F30, W30 TRACTORS
NAVISTAR
4.125" (104.775 MM)
Cyl Bore:
Stroke: 5.000" (127. MM)

2.3240-2.6250" (59.03-66.675 MM)
Rods:
BALL BEARINGS
Main:
Main:
Comments:
1020 TRACTOR
NAVISTAR
450
Cyl Bore:
335
37-40
F30, W30
4.250" (107.95 MM)
Cyl Bore:
TD-9A
TD-9A
4.406" (111.912 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9965-2.9975" (76.111-76.137 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 3.2475-3.2485" (82.487-82.512 MM)
Main:
2.7530 @ #3
Main:
Thrust Width:
260693R1, 260749R1, 275606R1, 275708R92, 50977D, 50977DA, 50977DCX, 52809D, 52809DC,
Casting Numbers:
52809DCX
Comments:
RD, GAS, TD-9A
NAVISTAR
5.5
335
W9, TD-9A, T-9
W9, TD-9A, T-9
4.406" (111.912 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.9965-2.9975" (76.111-76.137 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
#1 3.2475-3.2485" (82.487-82.512 MM)
Main:
2.7530" (69.926 MM)
Main:
Thrust Width:
260693R1, 260749R1, 275606R1, 275708R92, 50977D, 50977DA, 50977DCX, 52809D, 52809DC,
Casting Numbers:
52809DCX
Comments:
GAS, W9, TD-9A, T-9
NAVISTAR
5.5
335
WD9, WDR9
WD9, WDR9
4.406" (111.912 MM)

Stroke: 5.500" (139.7 MM)
Cyl Bore:
2.7480-2.7485 *" (69.799-69.812 MM) *
.109" (2.769 MM)
Rods:
Rod Fillet:
4.1225-4.1235" (104.712-104.737 MM)
Main:
2.7530 @ #3
Main:
Thrust Width:
260693R, 260693R1, 260749R1, 275606R1, 275708R92, 50977, 50977D, 50977DA, 50977DCX, 52809D,
Casting Numbers:
52809DC, 52809DCX
Comments:
DIESEL WD9, WDR9 * ENG PRIOR-WDCBM 18001 HAD CRANK #50977BDX WITH ROD JOURNAL
DIAMETER 3.6230-3.6235, NOT COUNTERBALANCED
NAVISTAR
5.7
350
5.500" (139.7 MM)

4.500" (114.3 MM)
Stroke:
Cyl Bore:
2.7475-2.7485" (69.787-69.812 MM)
Rods:
4.1225-4.1235" (104.712-104.737 MM)
Main:
Main:
260693R1, 260749R1, 275606R1, 275708R92, 50977D, 50977DA, 50977DCX, 52809D, 52809DC,
Casting Numbers:
52809DCX
Comments:
GAS, W9, 600, 650 TRACTOR
370

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
4 Cylinders
5.7
350
6.1
370
(cont.)
TD-9, 600, 650, SU
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.7475-2.7485" (69.787-69.812 MM)
Rods:
4.1225-4.1235" (104.712-104.737 MM)
Main:
Main:
DIESEL, TD-9, 600, 650 TRACTOR, SUPER WD9, WDR9
Comments:
NAVISTAR
Engine Model
TD-9
4.500" (114.3 MM)
W9, TD9
UD370
260693R1, 260749R1, 275606R1, 275708R92, 50977D, 50977DA, 50977DCX, 52809D, 52809DC,

52809DCX
W9, TD9, UD370
Casting Numbers:
Comments:
NAVISTAR
Stroke:
Rods:
6.6
402
5.5000" (139.7 MM)

2.5185-2.5193" (63.97-63.99 MM)
3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.331-4.330" (110.007-109.982 MM)
Rear Seal Diameter:
Comments:
DT-402 NEUSS DIESEL, GERMAN BUILT
NAVISTAR
7.5
DT402
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
461
75-85
DT402
3.9370" (100. MM)

.224-.248" (5.69-6.299 MM)
1.6515-1.6555" (41.948-42.05 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445
TD-14
TD14
4.750" (120.65 MM)

Stroke: 6.500" (165.1 MM)
Cyl Bore:
2.9977-2.9990" (76.142-76.175 MM)
.219" (5.563 MM)
Rods:
Rod Fillet:
#1 3.3742-3.3755" (85.705-85.738 MM)
.219" (5.563 MM)
Main:
Main Fillet:
1.7850
Main:
Thrust Width:
24895D, 24895DD, 378684R21, 378685R11, 378686R21, 53401D, 53401DC, 54401DC, 54401DCX,
Casting Numbers:
675050C1
Comments:
TD-14 DIESEL
NAVISTAR
NAVISTAR
6 Cylinders
2.6
161
Stroke: 3.500" (88.9 MM)

1.8740-1.8750" (47.6-47.625 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
AMC/JEEP
Comments:
NAVISTAR
2.8
52-62
Cyl Bore:
Rod Fillet:
3.125" (79.375 MM)

3/32 (.094")
Thrust Width:
1.308
174
HD174E
3.563" (90.5 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.2975-2.2985" (58.357-58.382 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
C1 2.5575-2.5585" (64.961-64.986 MM)
Main:
1.9790
Main:
Thrust Width:
43734D, 43734DC, 43734DCX, 43734DEX, 43734DF, 43734DFY, 43734DG, 43734DHX, 43739
Casting Numbers:
Comments:
HD174E
NAVISTAR
3.2
199
Stroke: 3.656" (92.862 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
#1 2.7484-2.7494" (69.809-69.835 MM)
Main:
Main:
1728C1, 817268, 817268-R1
Casting Numbers:
NAVISTAR
3.4
213
Stroke: 4.1250" (104.775 MM)

2.0000-2.0010" (50.800-50.825 MM)
Rods:
2.6350-2.6360" (66.929-66.954 MM)
Main:
Main:
1784YK
Casting Numbers:
Comments:
HD213
NAVISTAR
3.5
64-67
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
HD213
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
214
Stroke: 4.125" (104.775 MM)

2.0000-2.0010" (50.8-50.825 MM)
Rods:
#1 2.6350-2.6360" (66.929-66.954 MM)
Main:
Main:
1784YF, 1784YG, 1784YH, 1784YK, 1784YM
Casting Numbers:
Comments:
GAS, GRD214A, FLATHEAD, TRUCK
4.125" (104.775 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.0610
37-49
GRD214A
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
371
GRD214
3.3130" (84.150 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.5560"
50-55
3.313" (84.15 MM)

.094" (2.388 MM)
.141" (3.581 MM)
1.5560"
GRD214A

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
6 Cylinders
3.6
220
Stroke: 3.688" (93.7 mm)

2.3730-2.3740" (60.274 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
GAS, 560, 660, 656, 706 TRACTORS
Comments:
NAVISTAR
3.6
220
NAVISTAR
3.6
220
3.6
3.6
3.6
220
3.8
3.563" (90.5 MM)
Cyl Bore:
3.5625" (90.488 mm)
Thrust Width:
#3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.563" (90.5 MM)

.156" (3.962 MM)
.125" (3.175 MM)
1.6260"
Cyl Bore:
3.5625" (90.488 MM)
BD
221
55-63
Stroke: 3.687" (93.65 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
ALL 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
376266
Casting Numbers:
Comments:
GAS, 460, 560, 606 TRACTORS
NAVISTAR
Cyl Bore:
50-62
Stroke: 3.688" (93.675 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Comments:
GAS TRUCK
NAVISTAR
3.5608-3.5628" (90.444-90.495 MM)
220
Stroke: 3.688" (93.675 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
70115R1, 70115R3
Casting Numbers:
NAVISTAR
460
3.8
232
233
68-74
GRD
Stroke: 4.500" (114.3 MM)

2.0000-2.0010" (50.8-50.825 MM)
Rods:
#1 2.6350-2.6360" (66.929-66.954 MM)
Main:
Main:
1784YD, 1784YP, 60835H, 60835HA, 60835HB
Casting Numbers:
Comments:
GAS, GRD233, FLATHEAD, TRUCK
NAVISTAR
3.8
236
NAVISTAR
3.8
236
HD232C
3.313" (84.15 MM)

.094" (2.388 MM)
.141" (3.581 MM)
1.5560
41-58
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.688" (93.675 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
367266, 367266R1
Casting Numbers:
Comments:
460 TD9 DIESEL TRACTOR, 3616
Stroke: 3.688" (93.675 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Comments:
GAS
460, 560, 606

3.560" (90.424 MM)
Cyl Bore:
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.0000-2.0010" (50.8-50.825 MM)
Rods:
Rod Fillet:
#1 2.6350-2.6360" (66.929-66.954 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3172216, 3172218, 3172218R, 3188946, 3204904
Casting Numbers:
Comments:
GAS, AMC/JEEP
NAVISTAR
560,660,656,706
Cyl Bore:
SD
3.6875" (93.663 mm)

2.373-2.374" (60.274-60.299 MM)
2.748-2.749" (69.799-69.825 MM)
NAVISTAR
50-68
(cont.)
BG
Stroke: 3.688" (93.675 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
70115R1
Casting Numbers:
Stroke:
Rods:
Main:
Main:
560
Engine Model
GRD233
3.3125" (84.138 MM)

3/32 (.094")
9/64 (.141")
1.5560
460
TD9
Cyl Bore:
3.6875-3.6891" (93.663-93.703 MM)
Cyl Bore:
3.6875-3.6891" (93.663-93.703 MM)
372

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
6 Cylinders
3.8
236
3.9
NAVISTAR
3.9
4.016" (102.006 MM)

2.3730-2.3740" (60.274-60.3 MM)
2.7480-2.7490" (69.799-69.825 MM)
240
Rods:
2.3730-2.3740" (60.274-60.3 MM)
NAVISTAR
NAVISTAR
3.9
3.9
240
240
240
BLACK DIAMOND
3.9
241
4.0
SD
4.1
Cyl Bore:
3.563" (90.5 MM)
Cyl Bore:
3.563" (90.5 MM)
SILVER DIAMOND
BD240
SD240
Cyl Bore:
3.563" (90.5 MM)
Cyl Bore:
3.5625" (90.488 MM)
Thrust Width:
1.620 @ #3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.375" (85.725 MM)

.141" (3.581 MM)
.141" (3.581 MM)
1.5560" (39.522 MM)
BG
57-67
242
Stroke: 4.500" (114.3 MM)

2.0000-2.0010" (50.8-50.825 MM)
Rods:
#1 2.6350-2.6360" (66.929-66.954 MM)
Main:
Main:
1784YD, 1784YP, 60835H, 60835HA, 60835HB
Casting Numbers:
NAVISTAR
3.563" (90.5 MM)

.156" (3.962 MM)
.125" (3.175 MM)
1.6260" (41.300 MM)
Stroke: 4.018" (102.057 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Comments:
GAS
NAVISTAR
63-69
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 4.016" (102.006 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Comments:
SILVER DIAMOND, SDGAS
NAVISTAR
(cont.)
3.688" (93.675 MM)
Cyl Bore:
Stroke: 4.020" (102.108 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
70118R1
Casting Numbers:
Comments:
BLACK DIAMOND, BD240
Stroke:
Rods:
Main:
Main:
Engine Model
UD
Stroke: 3.688" (93.675 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
OFF ROAD APPLICATIONS
Comments:
NAVISTAR
Year
250
3.875" (98.425 MM)

Stroke: 5.250" (133.35 MM)
Cyl Bore:
2.4975-2.4985" (63.437-63.462 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 2.7475-2.7485" (69.787-69.812 MM)
.125" (3.175 MM)
Main:
Main Fillet:
2.2510" (57.175 MM)
Main:
Thrust Width:
116447H, 125932R, 125932R1, 44571DB, 44571DE, 44571DEX, 44572, 45571DB, 45571DD, 45571DD,
Casting Numbers:
45571DDX, 45571DE, 45571DEX, 45571DFX, 45571FDX, 45572, 45581DD, 45771DD
Comments:
M TRACTOR
NAVISTAR
Stroke:
Rods:
4.2
258
3.906" (99.212 MM)

2.0948-2.0955" (53.208-53.226 MM)
72-74
Cyl Bore:
3.750" (95.25 MM)
Rod Width:
1.063" (27. MM)
2.4996-2.5001" (63.49-63.503 MM)

Main:
Main:
Comments:
JEEP
NAVISTAR
4.3
Stroke: 4.391" (111.531 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
ALL 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Balance: External
4.000" (101.600 mm)
Rear Seal Diameter:
Comments:
560, 660, 656, 706 GAS TRACTOR
263
C(1)
560
Cyl Bore:
373
3.563" (90.5 MM)

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
Engine Model
6 Cylinders
4.3
264
400
(cont.)
63-74
BD254
3.8120" (96.825 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.3745-2.3755" (60.312-60.338 MM)
.156" (3.962 MM)
Rods:
Rod Fillet:
#1 2.7475-2.7485" (69.787-69.812 MM)
.078" (1.981 MM)
Main:
Main Fillet:
1.6260" (41.300 MM)
Main:
Thrust Width:
141779R1, 141780R1, 166088R1, 1784YD, 1784YP, 261265R1, 261265R41, 267267, 315712R3,
Casting Numbers:
320185R1, 323882R11, 367267R1, 44571DB, 44571DE, 44572, 45571DD, 45571DE, 45571DEX,
45571FDX, 45572, 46923D, 52010D, 52010DA, 567267R1, 60835H, 60835HA, 60835HB, 61265R1
EARLY GAS 706, 400 TRACTOR & TRUCK, UB TOO
Comments:
NAVISTAR
4.4
269
U, B, BD
40-69
3.5625" (90.488 MM)

Stroke: 4.500" (114.3 MM)
Cyl Bore:
2.1220-2.1230" (53.899-53.924 MM)
9/64, .141" (3.581 MM)
Rods:
Rod Fillet:
#1 2.7005-2.7015" (68.593-68.618 MM)
9/64, .141" (3.581 MM)
Main:
Main Fillet:
1.0610" (26.949 MM)
Main:
Thrust Width:
116447H, 125932R, 125932R1, 151045, 151045R1, 151045R2, 151046, 151046R1, 151046R2, 391930C1,
Casting Numbers:
46402DB
Comments:
U, B, BD, GAS TRUCK USES T/W
NAVISTAR
Stroke:
Rods:
4.5
275
V-275
4.134" (105.000 MM)

2.7164" (68.996 MM) REPORTED
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.1885-3.1895" (80.987-81.013 MM)

Main:
Main:
2.1455" (54.495 MM) REPORTED
4.6450" (117.983 MM) REPORTED
Rear Seal Diameter:
Comments:
TURBO DIESEL
NAVISTAR
4.6
282
Stroke: 4.391" (111.531 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
#1 2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
320185
Casting Numbers:
Comments:
DIESEL, 560, 656, 660, 706, UD-282 ALSO
NAVISTAR
4.6
282
05-06
V-275
3.7401-3.7402" (94.999-95.001MM)
ROLLED
2.1920" (55.676 MM) REPORTED
ROLLED
1.1210" (28.473 MM) REPORTED
560
D282
3.6875-3.6891" (93.663-93.703 MM)
Cyl Bore:
UTD282
53-70
UTD282
3.813" (96.85 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.1220-2.1230" (53.899-53.924 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.7005-2.7015" (68.593-68.618 MM)
.125" (3.175 MM)
Main:
Main Fillet:
1.6180
Main:
Thrust Width:
261265R1, 261265R41, 267267, 315712R3, 320185R1, 323882R11, 367267R1, 44571DB, 44571DE,
Casting Numbers:
44572, 45571DD, 45571DE, 45571DEX, 45571FDX, 45572, 46923D, 52010D, 52010DA, 55205,
567267R1, 61265R1, 7062R1, 74062R, 74062R1, 74962R1
Comments:
GAS, UTD282 USES T/W
NAVISTAR
4.8
291
666, 706, 766
666, 706, 766
3.750" (95.25 MM)

Stroke: 4.391" (111.531 MM)
Cyl Bore:
2.3730-2.7340" (60.274-69.444 MM)
.156" (3.962 MM)
Rods:
Rod Fillet:
2.7480-2.7490" (69.799-69.825 MM)
Main:
1.5160" (38.506 MM)
Main:
Thrust Width:
267267, 315712R, 315712R3, 320185R, 320185R1, 323882R11, 367267R, 367267R1, 567267R1
Casting Numbers:
Comments:
GAS, 666, 706, 766 TRACTOR
NAVISTAR
4.9
298
W40
Stroke: 4.500" (114.3 MM)

2.2470-2.2480" (57.074-57.099 MM)
Rods:
2.7005-2.7015" (68.593-68.618 MM)
Main:
Main:
Comments:
W40 TRACTOR
NAVISTAR
4.9
W40
301
Stroke: 4.390" (111.506 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Comments:
GAS, 806, 2806, 856, 2856 TRACTORS
W40
3.750" (95.25 MM)
Cyl Bore:
806
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
374
806, 2806, 856

3.812" (96.825 MM)
.156" (3.962 MM)
.156" (3.962 MM)
1.516" (38.506 MM)

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
6 Cylinders
4.9
301
5.0
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
308
BD
5.0
308
5.0
308
NAVISTAR
5.1
310
4.3750" (111.125 MM)

2.5185-2.5193" (63.97-63.99 MM)
3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
3059514R1, 305951R1
Casting Numbers:
Comments:
NEUSS DIESEL, 706, 756 TRACTORS
NAVISTAR
5.1
NAVISTAR
5.2
5.8
3.813" (96.85 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.6180" (41.097 MM)
3.813" (96.85 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.6180" (41.097 MM)
706
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
D310
3.8750-3.8759" (98.425-98.448 MM)
.224-.248" (5.69-6.299 MM)
1.730-1.734" (43.942-44.044 MM)
.193-.216" (4.902-5.486 MM)
1.4429-1.4445
HYDRO 70
Cyl Bore:
318
Stroke: 4.500" (114.3 MM)

2.7510-2.7520" (69.875-69.901 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
118528H
Casting Numbers:
Comments:
RED-318, GAS USES T/W
NAVISTAR
D-310
312
Stroke: 4.410" (112.014 MM)

2.9977-2.9990" (76.142-76.175 MM)
Rods:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main:
67507C1, 675707C
Casting Numbers:
Comments:
666, HYDRO 70 & 86 DIESEL TRACTORS
BD308
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.1220-2.1230" (53.899-53.924 MM)
Rods:
Rod Fillet:
#1 2.7005-2.7015" (68.593-68.618 MM)
Main:
Main Fillet:
Main:
Thrust Width:
116447, 116447H, 125932, 125932R, 125932R1
Casting Numbers:
Comments:
GAS USES T/W
Stroke:
Rods:
55-57
3.8125" (96.838 MM)
1/8, .125" (3.175 MM)
1/8, .125" (3.175 MM)
1.6180" (41.097 MM)
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.1220-2.1230" (53.899-53.924 MM)
Rods:
Rod Fillet:
#1 2.7005-2.7015" (68.593-68.618 MM)
Main:
Main Fillet:
Main:
Thrust Width:
116447, 116447H, 125932, 125932R, 125932R1, 391930C1
Casting Numbers:
Comments:
GAS USES T/W
NAVISTAR
3.812" (96.825 MM)

.156" (3.962 MM)
.156" (3.962 MM)
1.516
BD308
Stroke: 4.500" (114.3 MM)

Cyl Bore:
2.1220-2.1230" (53.899-53.924 MM)
Rods:
Rod Fillet:
#1 2.7005-2.7015" (68.593-68.618 MM)
Main:
Main Fillet:
Main:
Thrust Width:
116447, 116447H, 125932, 125932R, 125932R1
Casting Numbers:
Comments:
GAS, BD308 USES T/W
NAVISTAR
(cont.)
Stroke: 4.390" (111.506 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
HOUGH LOADERS
Comments:
NAVISTAR
Engine Model
666,HYDRO 70,
3.875" (98.425 MM)
RED-318
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.875" (98.425 MM)

.125" (3.175 MM)
.125" (3.175 MM)
2.3680" (60.147 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.877-3.878" (98.476-98.501 MM)

.145-.156" (3.683-3.962 MM)
.145-.156" (3.683-3.962 MM)
1.759 MAX @ #4
354
Stroke: 5.00" (127. MM)

2.4988-2.9996" (63.47-76.19 MM)
Rods:
2.9984-2.9996" (76.159-76.19 MM)
Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
PERKINS DIESEL
375
RED-318

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
Stroke:
Rods:
Engine Model
6 Cylinders
5.8
358
5.059" (128.499 MM)

2.5185-2.5193" (63.97-63.99 MM)
(cont.)
826
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.1484-3.1492" (79.969-79.99 MM)

Main:
Main:
4.3207-4.3299" (109.746-109.979 MM)
Rear Seal Diameter:
3059514R1, 3136036R95
Casting Numbers:
Comments:
Year
D358
3.8750-3.8759" (98.425-98.448 MM)
.224-.248" (5.69-6.299 MM)
1.730-1.734" (43.942-44.044 MM)
.194-.216" (4.928-5.486 MM)
1.4429-1.4445
D/DT 358, NEUSS DIESEL, 826 TRACTOR, TURBO TORQUE FOR COUNTERWEIGHTS 57 FT/LBS
NAVISTAR
5.9
360
D(1)
Stroke: 5.085" (129.159 MM)

2.9977-2.9990" (76.142-76.175 MM)
Rods:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main:
675351C2
Casting Numbers:
Comments:
DIESEL, D360, 766, 866 TRACTOR
NAVISTAR
5.9
766
360
DT
DT360
Stroke: 4.751" (120.675 MM)

Cyl Bore:
2.5182-2.5197" (63.962-64. MM)
Rods:
Rod Fillet:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main Fillet:
Main:
Thrust Width:
4.9984-5.000" (126.959-127. MM)
Rear Seal Diameter:
1809954C1
Casting Numbers:
Comments:
DT/DTA-360 DIESEL TRUCK * INDUCTION HARDENED GRINDABLE,
STD:1.4355, O.S. BRG AVLBL
NAVISTAR
5.9
361
Stroke: 4.500" (114.3 MM)

2.9980-2.9990" (76.149-76.175 MM)
Rods:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main:
5.001" (127.025 MM)
Rear Seal Diameter:
323882R, 323882R1, 323882R2, 332882
Casting Numbers:
Comments:
DIESEL 806, 856 TRACTORS, D361, DT361 USES T/W
NAVISTAR
5.9
NAVISTAR
6.1
806
NAVISTAR
6.6
NAVISTAR
6.7
Stroke: 4.125" (104.775 MM)

2.7510-2.7520" (69.875-69.901 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
118528, 118528H
Casting Numbers:
Comments:
RD, GAS, WD-9 USES T/W
DT360
THRUST BRG LENGTH
60-72
D361
4.1248-4.1256" (104.77-104.79 MM)

.203" (5.156 MM)
.203" (5.156 MM)
2.3680
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.375" (111.125 MM)

.125" (3.175 MM)
.125" (3.175 MM)
2.3680
49-69
372
WD-9
Stroke: 4.125" (104.775 MM)

Cyl Bore:
2.7510-2.7520" (69.875-69.901 MM)
Rods:
Rod Fillet:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main Fillet:
Main:
Thrust Width:
837719R1, 83917R, 83917R1, 83917R2, 93917R1
Casting Numbers:
Comments:
RD372, GAS, WD-9 USES T/W
401
Stroke: 4.125" (104.775 MM)

2.7510-2.7520" (69.875-69.901 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
118530
Casting Numbers:
Comments:
RD, GAS, WD-9 USES T/W
87-94
4.0095-4.0105" (101.841-101.867 MM)

.153-.160" (3.886-4.064 MM)
.220-.235" (5.588-5.969 MM)
1.442-1.444" @ #7
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
361
Stroke: 4.125" (104.775 MM)

2.7510-2.7520" (69.875-69.901 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
118528, 118528H
Casting Numbers:
Comments:
RD, GAS USES T/W
D360
3.875" (98.425 MM)
Cyl Bore:
WD-9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
406
WD-9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
376
49-69
4.375" (111.125 MM)
.125" (3.175 MM)
.125" (3.175 MM)
2.3680
49-69
4.375" (111.125 MM)
.125" (3.175 MM)
.125" (3.175 MM)
2.3680
49-69
4.375" (111.125 MM)
.125" (3.175 MM)
.125" (3.175 MM)
2.3680
RD372

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
6.7
407
DT
1256
DT407
DT407, 1256, 1456 & 21456 DIESEL TRACTORS
NAVISTAR
NAVISTAR
6.7
407
6.7
408
856
408
4.680" (118.872 MM)

3.1494-3.1506" (79.995-80.025 MM)
DT408
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
NAVISTAR
6.8
414
Stroke: 4.750" (120.65 MM)

2.9977-2.9990" (76.142-76.175 MM)
Rods:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main:
675050, 675050C, 675050C1
Casting Numbers:
Comments:
1066, DT414 TURBO/NON
NAVISTAR
7.0
429
NAVISTAR
DT
7.1
436
DT414
TD20
DT408
4.3005-4.3015" (109.233-109.258 MM)
DT-429
4.5006-4.5016" (114.315-114.341 MM)
Cyl Bore:
5.004" (128.016 MM)

2.9977-2.9990" (76.142-76.175 MM)
93-96
4.3005-4.3015" (109.233-109.258 MM)

.225" (5.715 MM)
1.250-1.260" (31.75-32.004 MM)
.225" (5.715 MM)
1.344-1.364 @#7
1066
Cyl Bore:
Stroke: 4.500" (114.3 MM)

2.9972-2.9982" (76.129-76.154 MM)
Rods:
3.7480-3.7490" (95.199-95.225 MM)
Main:
Main:
349344R1
Casting Numbers:
Comments:
DIESEL, TD20 DOZER
D407
4.3219-4.3329" (109.776-110.056 MM)
Cyl Bore:
3.5344-3.5356" (89.774-89.804 MM)

Main:
Main:
821914C1
Casting Numbers:
Comments:
DT408 DIESEL CRANKSHAFT FLANGE DIAMETER 5.550
Stroke:
Rods:
(cont.)
4.3219-4.3329" (109.776-110.056 MM)
Cyl Bore:
Stroke: 4.6250" (117.475 MM)

2.9982-2.9990" (76.154-76.175 MM)
Rods:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main:
6000008, 6700080, 670008C, 670008C1
Casting Numbers:
Comments:
DIESEL, D407, 856 TRACTORS, HOUGH LOADERS
Stroke:
Rods:
Engine Model
6 Cylinders
Stroke: 4.6250" (117.475 MM)

2.9982-2.9990" (76.154-76.175 MM)
Rods:
3.3742-3.3755" (85.705-85.738 MM)
Main:
Main:
670008, 6700080, 670008C, 670008C1
Casting Numbers:
Comments:
Year
1486
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
4.300" (109.22 MM)

.220-.235" (5.588-5.969 MM)
1.6850-1.6900" (42.799-42.926 MM)
.220-.235" (5.588-5.969 MM)
1.783-1.786 @#7
ALL 3.3742-3.3755" (85.705-85.738 MM)

Main:
Main:
Balance: Internal
ON PULLEY
4.9984-5.0000" (126.959-127. MM) *
Rear Seal Diameter:
675051, 675051C, 675051C1
Casting Numbers:
Comments:
TURBO DIESEL,1486, 1586, 3688 TRACTOR, HYDRO 100 * REAR FLANGE AREA/SEAL WEAR SLEEVE
NAVISTAR
7.4
450
Stroke: 5.000" (127. MM)

2.7510-2.7520" (69.875-69.901 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
118530, 118530H
Casting Numbers:
Comments:
RD, GAS, DRY SLEEVE BLOCK, WD-9 USES T/W
NAVISTAR
7.6
WD-9
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
466
Stroke: 5.3504" (135.9 MM)

3.1494-3.1506" (79.995-80.025 MM)
Rods:
3.5344-3.5356" (89.774-89.804 MM)
Main:
Main:
Comments:
DT466 DIESEL, MECHANICAL INJECTION
DT466
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
377
49-69
4.375" (111.125 MM)
.125" (3.175 MM)
.125" (3.175 MM)
2.3680
94-96
DT466
4.3005-4.3015" (109.233-109.258 MM)

.225" (5.715 MM)
.225" (5.715 MM)
1.3535-1.3555" (34.378-34.429 MM) @ #7

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
Stroke:
Rods:
6 Cylinders
7.6
466
DT
5.350" (135.89 MM)

2.9977-2.9990" (76.142-76.175 MM)
ALL 3.3742-3.3755" (85.705-85.738 MM)

Main:
Main:
Balance: Internal
ON PULLEY
4.9984-5.0000" (126.959-127. MM) *
Rear Seal Diameter:
675591C, 675591C-1, 675591-C2
Casting Numbers:
Comments:
49-76
(cont.)
DT466B
4.300" (109.22 MM)

.220-.235" (5.588-5.969 MM)
1.6850-1.6900" (42.799-42.926 MM)
.220-.235" (5.588-5.969 MM)
1.783-1.786 @#7
DT466B SERIAL #400000 & BELOW * REAR FLANGE AREA/SEAL WEAR SLEEVE
NAVISTAR
Stroke:
Rods:
DT466B
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Engine Model
7.6
466
5.350" (135.89 MM)

2.9977-2.9990" (76.142-76.175 MM)
DT466B & C
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
80-90
DT466B
4.3005-4.3015" (109.233-109.258 MM)

.220-.235" (5.588-5.969 MM)
1.190-1.200" (30.226-30.48 MM)
.220-.235" (5.588-5.969 MM)
1.783-1.786 @ #7
#1 3.3742-3.3755" (85.705-85.738 MM)

Main:
Main:
Balance: Internal
ON PULLEY
4.9984-5.0000" (126.959-127. MM) *
Rear Seal Diameter:
675591C, 675591-C2, 675591-C3
Casting Numbers:
Comments:
DT466B & C SERIAL #S400001 & ABOVE * REAR FLANGE AREA/SEAL WEAR SLEEVE
NAVISTAR
Stroke:
Rods:
7.6
466
5.350" (135.89 MM)

2.9977-2.9990" (76.142-76.175 MM)
DT466C
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
88-90
DT466C
4.3005-4.3015" (109.233-109.258 MM)

.192-.208" (4.877-5.283 MM)
1.250-1.260" (31.75-32.004 MM)
.192-.208" (4.877-5.283 MM)
1.783-1.786 @ #7
#1 3.3742-3.3755" (85.705-85.738 MM)

Main:
Main:
Balance: Internal
ON PULLEY
4.9984-5.0000" (126.959-127. MM) *
Rear Seal Diameter:
675591-C2, 675591-C3
Casting Numbers:
Comments:
DT466C SERIAL # 439618 & ABOVE * REAR FLANGE AREA/SEAL WEAR SLEEVE
NAVISTAR
Stroke:
Rods:
7.6
466
1990
5.350" (135.89 MM)

3.1494-3.1506" (79.995-80.025 MM)
3.5344-3.5356" (89.774-89.804 MM)

Main:
Main:
Balance: Internal
5.550" (140.97 MM)
Rear Seal Diameter:
1816975C1, 675591C, 675591-C4
Casting Numbers:
Comments:
DT466C SERIAL #594839 & ABOVE
NAVISTAR
Stroke:
Rods:
7.6
DT466C
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
466
DT466E
4.680" (119.000 MM)

3.1494-3.1506" (79.995-80.025 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5344-3.5356" (89.774-89.804 MM)

Main:
Main:
Balance: Internal
5.550" (140.970 MM)
Rear Seal Diameter:
Comments:
DT466E ELECTRONIC DIESEL THRUST BEARING LENGTH 1.338"
NAVISTAR
7.6
466
Stroke: 4.6810" (118.900 MM)

3.1494-3.1506" (79.995-80.025 MM)
Rods:
3.5344-3.5356" (89.774-89.804 MM)
Main:
Main:
Balance: Internal
1821914C1
Casting Numbers:
Comments:
DT466E DIESEL, ELECTRONIC FUEL INJ
378
DT466C
00-04
DT466E
4.3005-4.3015" (109.233-109.258 MM)

.225" (5.715 MM)
1.250-1.260" (31.750-32.004 MM)
.225" (5.715 MM)
1.353-1.355" @ #7
DT466E
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
90-93
4.3005-4.3015" (109.233-109.258 MM)

.225" (5.715 MM)
1.250-1.260" (31.75-32.004 MM)
.225" (5.715 MM)
1.344-1.364 @ #7
97-99
DT466E
4.3005-4.3015" (109.233-109.258 MM)

.225" (5.715 MM)
.225" (5.715 MM)
1.710" THRUST @ #7

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
6 Cylinders
8.2
501
NAVISTAR
NAVISTAR
8.2
502
4.5002" (114.305 MM)

.125" (3.175 MM)
.125" (3.175 MM)
2.3680
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.400" (111.76 MM)

.109" (2.769 MM)
.125" (3.175 MM)
2.6240
DT
8.7
NAVISTAR
8.7
49-69
530
530
5.350" (135.89 MM)

3.1494-3.1506" (79.995-80.025 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5344-3.5356" (89.774-89.804 MM)

Main:
Main:
Balance: Internal
5.549-5.551" (140.945-140.995 MM)
Rear Seal Diameter:
1821913C1, 3C1
Casting Numbers:
Comments:
530 DIESEL THRUST BRG LENGTH 1.338
Stroke:
Rods:
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
RD, GAS USES T/W
Stroke: 5.500" (139.7 MM)

2.7475-2.7485" (69.787-69.812 MM)
Rods:
#1 3.5673-3.5683" (90.609-90.635 MM)
Main:
Main:
252576R2, 260068R1, 260068R2
Casting Numbers:
Comments:
DIESEL TRUCK USES T/W
Stroke:
Rods:
(cont.)
49-69
Stroke: 5.250" (133.350 MM)

2.7510-2.7520" (69.875-69.901 MM)
Rods:
#1 3.2495-3.2505" (82.537-82.563 MM)
Main:
Main:
131850R1, 132251R1, 258412C, 258414C
Casting Numbers:
Comments:
Engine Model
530
5.350" (135.89 MM)

3.1494-3.1506" (79.995 TO 80.025 MM)
530
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.5344-3.5356" (89.774 TO 89.804 MM)

Main:
Main:
Balance: Internal
5.550" (140.97 MM)
Rear Seal Diameter:
1821913C1
Casting Numbers:
Comments:
530 ELECTRONIC DIESEL THRUST BRG LENGTH 1.338
NAVISTAR
9.1
554
Stroke: 5.500" (139.7 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
#1 3.4975-3.4985" (88.837-88.862 MM)
Main:
Main:
318175R11, 31875R11
Casting Numbers:
Comments:
TD18 SERIES
NAVISTAR
9.6
NAVISTAR
11.3
NAVISTAR
13.4
97-04
TD18
530
TD18
4.625" (117.475 MM)
.125" (3.175 MM)
Thrust Width:
2.8600
TD20
TD20
Cyl Bore:
Rod Fillet:
4.750" (120.65 MM)

.125" (3.175 MM)
Thrust Width:
2.8600
691
Stroke: 6.500" (165.1 MM)

Cyl Bore:
3.2475-3.2485" (82.487-82.512 MM)
Rods:
Rod Fillet:
#1 3.4975-3.4985" (88.837-88.862 MM)
Main:
Main:
Thrust Width:
263126R1, 263126R2, 32288D, 32288DB, 32305
Casting Numbers:
Comments:
TD SERIES
Stroke: 6.000" (152.4 MM)

3.4965-3.4975" (88.811-88.837 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
277100R1
Casting Numbers:
Comments:
D & DT-817 A SERIES
530
4.5895-4.5905" (116.573 TO 116.599 MM)

.225" (5.715 MM)
1.250-1.260" (31.75 TO 32.004 MM)
.225" (5.715 MM)
1.353-1.355 @ #7
Cyl Bore:
Rod Fillet:
585
Stroke: 5.500" (139.7 MM)

3.2475-3.2485" (82.487-82.512 MM)
Rods:
#1 3.4975-3.4985" (88.837-88.862 MM)
Main:
Main:
318175R11, 31875R11
Casting Numbers:
Comments:
TD SERIES, TD-20
93-96
4.5895-4.5905" (116.573-116.599 MM)

.225" (5.715 MM)
1.250-1.260" (31.75-32.004 MM)
.225" (5.715 MM)
1.344-1.364 @ #7
817
4.750" (120.65 MM)

.125" (3.175 MM)
2.8600
A SERIES
Cyl Bore:
Rod Fillet:
5.375" (136.525 MM)

.156" (3.962 MM)
Thrust Width:
2.6390
379
D817 A SERIES

Make
Liter
CID
Vin
Model
Year
NAVISTAR
NAVISTAR
6 Cylinders
13.4
817
817-B
Stroke: 6.000" (152.4 MM)

3.4965-3.4975" (88.811-88.837 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
Balance: External
277100R1
Casting Numbers:
Comments:
B SERIES
Engine Model
(cont.)
D817 B SERIES
Cyl Bore:
Rod Fillet:
5.375" (136.525 MM)

.156" (3.962 MM)
Thrust Width:
2.6390
D & DT-817 B SERIES
NAVISTAR
13.4
817
817-C
Stroke: 6.000" (152.4 MM)

3.4965-3.4975" (88.811-88.837 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
277100R1
Casting Numbers:
Comments:
D & DT-817 C SERIES & 818 SERIES
NAVISTAR
17.9
C SERIES
D817 C SERIES
Cyl Bore:
Rod Fillet:
5.375" (136.525 MM)

.156" (3.962 MM)
Thrust Width:
2.6390
1,091
TD24
TD24
5.750" (146.05 MM)

Stroke: 7.000" (177.8 MM)
Cyl Bore:
3.6225-3.6235" (92.012-92.037 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 4.1218-4.1228" (104.694-104.719 MM)
Main:
3.8130
Main:
Thrust Width:
250699R1, 259719R1, 259719R2, 278062R1, 279062R1, 279064R91
Casting Numbers:
Comments:
TD24, TD1091
NAVISTAR
NAVISTAR
Stroke:
Rods:
Main:
Main:
8 Cylinders
3.7
226
62-69
3.219" (81.763 MM)

2.3730-2.3740" (60.274-60.3 MM)
2.7484-2.7494" (69.809-69.835 MM)
NAVISTAR
4.3
3.625" (92.075 MM)
Cyl Bore:
266
266
66-71
266 GAS
3.6250" (92.075 MM)

Stroke: 3.219" (81.763 MM)
Cyl Bore:
2.3730-2.3740" (60.274-60.3 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
2.7484-2.7494" (69.809-69.835 MM)
.141" (3.581 MM)
Main:
Main Fillet:
1.0610 @ #3
Main:
Thrust Width:
151045, 151045R1, 151045R2, 151046, 151046R1, 151046R2, 391930C1
Casting Numbers:
Comments:
266, GAS
NAVISTAR
5.0
304
304A
58-80
304A
3.8745-3.8770" (98.412-98.476 MM)

Stroke: 3.219" (81.763 MM)
Cyl Bore:
2.3730-2.3740" (60.274-60.3 MM)
.109" (2.769 MM)
Rods:
Rod Fillet:
2.7484-2.7494" (69.809-69.835 MM)
.141" (3.581 MM)
Main:
Main Fillet:
1.0610 @ #3
Main:
Thrust Width:
141045, 151045, 151045R1, 151045R2, 151046, 151046R1, 151046R2, 391930C1
Casting Numbers:
Comments:
304A GAS
NAVISTAR
5.7
345
Stroke: 3.656" (92.862 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7484-2.7494" (69.809-69.835 MM)
Main:
Main:
3.749" (95.225 MM)
Rear Seal Diameter:
151327, 151327R1, 151328, 151328R2
Casting Numbers:
Comments:
H/D GAS
NAVISTAR
Stroke:
Rods:
6.0
76-81
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
365
4.134" (105.000 MM)

2.7164" (68.996 MM) REPORTED
3.1885-3.1895" (80.987-81.013 MM)

Main:
Main:
2.1455" (54.495 MM) REPORTED
4.6450" (117.983 MM) REPORTED
Rear Seal Diameter:
Comments:
TURBO DIESEL
V365
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
380
3.8745-3.8770" (98.412-98.476 MM)

7/64, .109" (2.769 MM)
7/64, .109" (2.769 MM)
1.0610 @ #3
03-05
V-365
3.7401-3.7402" (94.999-95.001 MM)

ROLLED REPORTED
2.1920" (55.676 MM) REPORTED
ROLLED
1.1210" (28.473 MM) REPORTED

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
Engine Model
8 Cylinders
6.4
392
(cont.)
56-83
Stroke: 3.656" (92.862 MM)

2.3730-2.3740" (60.274-60.3 MM)
Rods:
2.7484-2.7494" (69.809-69.835 MM)
Main:
Main:
Balance: External
151327, 151327R1, 151328R2
Casting Numbers:
Comments:
Year
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.1245-4.1272" (104.762-104.831 MM)

.109" (2.769 MM)
.141" (3.581 MM))
1.0610 @ #3
Cyl Bore:
4.125" (104.775 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.170" (105.918 MM)

9/64, .141" (3.581 MM)
9/64, .141" (3.581 MM)
1.2020
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.1250" (104.775 MM)

1/8, .125" (3.175 MM)
1/8 , .125" (3.175 MM)
1.133 @ #3
GAS
NAVISTAR
6.5
401
UV
Stroke: 3.750" (95.25 MM)

2.6230-2.6240" (66.624-66.65 MM)
Rods:
Comments:
HD, GAS
NAVISTAR
6.6
401
AMC
Stroke: 3.680" (93.472 MM)

2.2478-2.2485" (57.094-57.112 MM)
Rods:
2.7482-2.7489" (69.804-69.822 MM)
Main:
Main:
3190079, 3199842, 3214725, 3220411
Casting Numbers:
Comments:
AMC/JEEP SCOUT
NAVISTAR
6.6
404
MV
Stroke: 3.740" (94.996 MM)

2.4980-2.4990" (63.449-63.475 MM)
Rods:
3.1228-3.1236" (79.319-79.339 MM)
Main:
Main:
2.749" (69.825 MM)
Rear Seal Diameter:
446766C, 466766C, 466766C1
Casting Numbers:
Comments:
GAS, TRUCK
NAVISTAR
6.9
420
75-84
80-86
83-88
Stroke: 4.181" (106.197 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
#1 3.1228-3.1236" (79.319-79.339 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.748-3.752" (95.199-95.301 MM)
Rear Seal Diameter:
1802224C92, 1802224C93, 1803420C1, 1805420, 1805420C1
Casting Numbers:
Comments:
DIESEL, FORD TRUCK
NAVISTAR
7.3
444
88-94
Stroke: 4.1811" (106.2 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
#1 3.1228-3.1236" (79.319-79.339 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: External
3.750" (95.25 MM)
Rear Seal Diameter:
1802224C92, 1802224C93, 1805420, 1805420C1
Casting Numbers:
Comments:
DIESEL, FORD TRUCK
NAVISTAR
7.3
444
4.000" (101.6 MM)

.120" (3.048 MM)
.121-.127" (3.073-3.226 MM)
1.1325-1.1355
T444E
T444E
4.1098" (104.389 MM)

1/8, .120", (3.048 MM)
1/8, .121-.127" (3.073-3.226 MM)
1.132-1.136 @ #3
94-04
A160,175&190F
4.1096-4.1103" (104.384-104.402 MM)

Stroke: 4.181" (106.197 MM)
Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
.145" (3.683 MM)
Rods:
Rod Fillet:
3.1228-3.1236" (79.319-79.339 MM)
.130 *
Main:
Main Fillet:
1.240-1.244 @ #5
Main:
Thrust Width:
4.372-4.376" (111.049-111.15 MM)
Rear Seal Diameter:
1818200C3
Casting Numbers:
Comments:
T444E, TURBO DIESEL, ELECTRONIC, DI * JOURNAL #5 RADIUS/FILLET: .157-.163
NAVISTAR
7.3
446
MV
74-82
Stroke: 4.180" (106.172 MM)

Cyl Bore:
2.4980-2.4990" (63.449-63.475 MM)
Rods:
Rod Fillet:
3.1228-3.1236" (79.319-79.339 MM)
Main:
Main Fillet:
Main:
Thrust Width:
3.750" (95.250 MM)
Rear Seal Diameter:
4465291, 446530, 446530C1, 446531, 446531C1
Casting Numbers:
Comments:
GAS, TRUCK
381
4.1250" (104.775 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.133 @ #3

Make
Liter
CID
Vin
Model
NAVISTAR
NAVISTAR
8 Cylinders
7.5
461
UV
Stroke: 4.313" (109.55 MM)

2.6230-2.6240" (66.624-66.65 MM)
Rods:
#1 3.2475-3.2485" (82.487-82.512 MM)
Main:
Main:
HD GAS
Comments:
NAVISTAR
Year
7.8
Engine Model
(cont.)
56-68
Cyl Bore:
Rod Fillet:
4.125" (104.775 MM)

.125" (3.175 MM)
Thrust Width:
2.3780
478
56-78
4.500" (114.3 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.6230-2.6240" (66.624-66.65 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
#1 3.1230-3.1240" (79.324-79.35 MM)
.141" (3.581 MM)
Main:
Main Fillet:
1.2020
Main:
Thrust Width:
131440R3, 133440R1, 133440R3, 242880R91, 242881R91, 289878C1
Casting Numbers:
Comments:
HD, GAS
NAVISTAR
8.8
537
75-82
Stroke: 4.000" (101.6 MM)

2.6230-2.6240" (66.624-66.65 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
448013, 4480130
Casting Numbers:
Comments:
HD, GAS
NAVISTAR
9.0
4.625" (117.475 MM)
Cyl Bore:
549
60-78
4.500" (114.3 MM)

Stroke: 4.313" (109.55 MM)
Cyl Bore:
2.6230-2.6240" (66.624-66.65 MM)
.141" (3.581 MM)
Rods:
Rod Fillet:
#1 3.1230-3.1240" (79.324-79.35 MM)
Main:
1.360
Main:
Thrust Width:
123441R3, 133441R3, 133894R1, 133894R3, 242882R91, 296733C1, 82856
Casting Numbers:
Comments:
HD, GAS
NAVISTAR
9.0
550
DV
Stroke: 4.313" (109.55 MM)

2.7530-2.7540" (69.926-69.952 MM)
Rods:
2.1230-2.1240" (53.924-53.95 MM)
Main:
Main:
Comments:
DIESEL D170, 1468 TRACTOR
NAVISTAR
9.0
551
9.4
573
9.9
NAVISTAR
13.1
4.5100-4.5125" (114.554-114.618 MM)
Thrust Width:
1.355 @ #3
Cyl Bore:
4.500" (114.3 MM)
Cyl Bore:
4.625" (117.475 MM)
78-85
605
Stroke: 4.500" (114.3 MM)

2.6230-2.6240" (66.624-66.65 MM)
Rods:
3.1230-3.1240" (79.324-79.35 MM)
Main:
Main:
Comments:
HD, GAS
Stroke: 4.500" (114.3 MM)

2.9972-2.9982" (76.129-76.154 MM)
Rods:
3.7477-3.7490" (95.192-95.225 MM)
Main:
Main:
Comments:
Cyl Bore:
DVT
Stroke: 4.500" (114.3 MM)

2.9972-2.9982" (76.129-76.154 MM)
Rods:
3.7477-3.7490" (95.192-95.225 MM)
Main:
Main:
Comments:
DIESEL
NAVISTAR
D170
4.500" (114.3 MM)
Stroke: 4.313" (109.55 MM)

2.7530-2.7540" (69.926-69.952 MM)
Rods:
ALL 3.1229-3.1240" (79.322-79.35 MM)
Main:
Main:
Balance: External
1700557C1, 263234G, I700557C1
Casting Numbers:
Comments:
LATE MODEL DIESEL TRUCK
NAVISTAR
1468
Cyl Bore:
800
DVT
4586
Cyl Bore:
382
5.3125-5.3155" (134.938-135.014 MM)

Make
Liter
CID
Vin
Model
NISSAN
99
SD-16
Stroke: 3.937" (100. MM)

2.0831-2.0839" (52.911-52.931 MM)
Rods:
2.7913-2.7921" (70.899-70.919 MM)
Main:
Main:
SD16
Casting Numbers:
Comments:
Thrust Width:
4 Cylinders
1.2
72
A12
1.2
72
1.2
76
1.2
76
1.3
79
1.4
85
1.4
NISSAN
1.4
2.874" (73. MM)
Thrust Width:
1.067
Cyl Bore:
2.953" (75.006 MM)
Thrust Width:
1.067
Cyl Bore:
2.953" (75.006 MM)
Thrust Width:
1.067
Cyl Bore:
2.874" (73. MM)
Thrust Width:
1.067
73
80
81-82
74
210
85
A14
210
A14
B210
Cyl Bore:
383
A12
A12A
A12A
A13
A14
81-82
A14
2.992" (75.997 MM)
Cyl Bore:
85
79-80
A12
2.992" (75.997 MM)
Cyl Bore:
Stroke: 3.032" (77.013 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
H6240
Casting Numbers:
Comments:
2BC, 210
Stroke: 3.032" (77.013 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
H6240
Casting Numbers:
Comments:
2BC, B210, F10
Cyl Bore:
A14
Stroke: 3.032" (77.013 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
H6240
Casting Numbers:
Comments:
2BC, 210
NISSAN
1.067
A13
Stroke: 3.032" (77.013 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
13241, 181, 2010132, 360, H89
Casting Numbers:
Comments:
2BC
NISSAN
Thrust Width:
A12A
Stroke: 2.756" (70.002 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
H9740
Casting Numbers:
Comments:
2BC
NISSAN
2.874" (73. MM)
A12A
Stroke: 2.756" (70.002 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
H9740
Casting Numbers:
Comments:
2BC
NISSAN
72
Cyl Bore:
A12
Stroke: 2.756" (70.002 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
Comments:
2BC
NISSAN
@ #3
DIESEL, SD-16
Stroke: 2.756" (70.002 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
2BC
Comments:
NISSAN
SD-16
3.2669-3.2693" (82.979-83.04 MM)
Cyl Bore:
NISSAN
NISSAN
Engine Model
3 Cylinders
1.6
NISSAN
Year
75-77
2.992" (75.997 MM)
A14

Make
Liter
CID
Vin
Model
Year
NISSAN
4 Cylinders
1.4
NISSAN
85
A14
1.7701-1.7706" (44.961-44.973 MM)

Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
H6240
Casting Numbers:
Comments:
NISSAN
B210
1.5
2.992" (75.997 MM)
Thrust Width:
3.032
69
D11
1.5
1.5
91
1.5
A15
1.5
1.5
NISSAN
1.6
97
E15
1.6
97
NISSAN
1.6
97
H15
PULSAR
2.992" (75.997 MM)
Thrust Width:
1.012 @ #3
Cyl Bore:
3.268" (83.007 MM)
Cyl Bore:
3.268" (83.007 MM)
Cyl Bore:
Rod Fillet:
2.992" (75.997 MM)

.094" (2.388 MM)
Thrust Width:
1.062 @ #3
72
73
E16I
Stroke: 3.465" (88.011 MM)

1.5730-1.5738" (39.954-39.975 MM)
Rods:
#1 1.9661-1.9673" (49.939-49.969 MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
31M
Casting Numbers:
Comments:
SOHC, SPI FLYWH BOLT HOLES OPEN-CRNKCASE
82-83
Cyl Bore:
L16
Stroke: 2.913" (73.99 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
219, 23040
Casting Numbers:
Comments:
2BC
86-88
384
A15
2.9724-2.9744" (75.500-75.550 MM)
L16
Stroke: 2.913" (73.99 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
219, 23040
Casting Numbers:
Comments:
2BC
NISSAN
81-82
H15
Stroke: 3.228" (81.991 MM)

1.5730-1.5738" (39.954-39.975 MM)
Rods:
1.9661-1.9673" (49.939-49.969 MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
11M, 11M-14, 17M
Casting Numbers:
Comments:
2BC, PULSAR, SENTRA, 310
A15
2.992" (75.997 MM)
Cyl Bore:
91
79-80
210
91
J15
2.992" (75.997 MM)
Cyl Bore:
Stroke: 3.268" (83.000 MM)

1.7701-1.7706" (44.961-44.974 MM)
Rods:
2.4780-2.4785" (62.942-62.955 MM)
Main:
Main:
Comments:
GAS, OHV, 1486CC ENGINE
NISSAN
69-90
210
A15
D11
3.0689-3.0710" (77.950-78.000 mm)
Cyl Bore:
91
66-78
J15
Stroke: 3.228" (81.991 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
Comments:
2BC, 210, 310
NISSAN
A14
2.874" (73. MM)

.079-.098" (2.007-2.489 MM)
.079-.098" (2.007-2.489 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
90
Stroke: 3.228" (81.991 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
1.9666-1.9671" (49.952-49.964 MM)
Main:
Main:
Comments:
2BC, 210, 310
NISSAN
78
Cyl Bore:
Stroke: 3.055" (77.597 MM)

Cyl Bore:
1.8756-1.8761" (47.64-47.653 MM)
Rods:
2.0004-2.0008" (50.81-50.82 MM)
Main:
Main:
Balance: Internal
J3B30
Casting Numbers:
Comments:
GAS & LPG FORKLIFT THRUST WASHER THKNS .090-.092
NISSAN
(cont.)
2BC, B210, F10
Stroke: 2.677" (67.996 MM)

1.7311" (43.97 MM)
Rods:
2.0588-2.0595" (52.294-52.311 MM)
Main:
Main:
Comments:
GAS, 1130 CC'S THRUST WASHER THKNS .091-.092
NISSAN
Engine Model
E15
L16
L16
E16I

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
4 Cylinders
1.6
97
E16S
Stroke: 3.465" (88.011 MM)

1.5730-1.5738" (39.954-39.975 MM)
Rods:
#1 1.9661-1.9673" (49.939-49.969 MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
31M
Casting Numbers:
Comments:
NISSAN
(cont.)
86-88
E16S
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2.992" (75.997 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.062 @ #3
Cyl Bore:
Rod Fillet:
3.0689-3.0709" (77.95-78.001 MM)

.094" (2.388 MM)
Thrust Width:
1.062 @ #3
SOHC, 2BC FLYWH BOLT HOLES OPEN-CRKCASE
1.6
97
CA16D
Stroke: 3.290" (83.566 MM)

1.7698-1.7706" (44.953-44.973 MM)
Rods:
#1 2.0847-2.0856" (52.951-52.974 MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
Comments:
DOHC, NON-FREE WHEELING, 16 VALVE
NISSAN
Engine Model
1.6
97
87
E16
PULSAR
CA16DE
83-86
E16
2.992" (75.997 MM)

Stroke: 3.465" (88.011 MM)
Cyl Bore:
1.5730-1.5738" (39.954-39.975 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 1.9661-1.9673" (49.939-49.969 MM)
Main:
1.062 @ #3
Main:
Thrust Width:
3.150" (80.01 MM)
Rear Seal Diameter:
31M
Casting Numbers:
Comments:
SOHC, 2BC, SENTRA, PULSAR FLYWH BOLT HOLES OPEN-CRANKCASE
NISSAN
1.6
97
GA16I
SENTRA
89-90
GA16I
2.9921-2.9933" (75.999-76.03 MM)

Stroke: 3.465" (88.011 MM)
Cyl Bore:
1.5731-1.5738" (39.957-39.975 MM)
.094" (2.388 MM)
Rods:
Rod Fillet:
#1 1.9665-1.9671" (49.949-49.964 MM)
.094" (2.388 MM)
Main:
Main Fillet:
1.062
Main:
Thrust Width:
Balance: Internal
3.307-3.310" (83.998-84.074 MM)
Rear Seal Diameter:
77A, 77-A5
Casting Numbers:
Comments:
SOHC, EFI, SENTRA, 12 VALVE HEAD FLYWHEEL BOLT HOLES OPEN-CRANKCASE
NISSAN
1.6
97
Stroke: 3.465" (88.011 MM)

1.5731-1.5738" (39.957-39.975 MM)
Rods:
#1 1.9661-1.9671" (49.939-49.964 MM)
Main:
Main:
Balance: Internal
3.307-3.310" (83.998-84.074 MM)
Rear Seal Diameter:
Comments:
DOHC, SENTRA, EFI
NISSAN
1.6
98
1.6
98
NISSAN
1.7
102
GA16DE
Cyl Bore:
3.433" (87.198 MM)
Thrust Width:
1.342
Cyl Bore:
3.433" (87.198 MM)
Thrust Width:
1.342
66-68
R16
Stroke: 2.630" (66.802 MM)

2.0455-2.0461" (51.956-51.971 MM)
Rods:
#1 2.4780-2.4785" (62.941-62.954 MM)
Main:
Main:
2340, A0638
Casting Numbers:
Comments:
411, OCT 1968 5 MAIN BEARING ENGINE 5 MAINS
Stroke: 3.290" (83.566 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
#1 2.0847-2.0852" (52.951-52.964 MM)
Main:
Main:
Comments:
DIESEL, SENTRA
91-98
2.9921-2.9933" (75.999-76.03 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.062" @ #3
R16
Stroke: 2.630" (66.802 MM)

2.0455-2.0461" (51.956-51.971 MM)
Rods:
#1 2.3606" (59.959 MM)
Main:
Main:
2340, A0638
Casting Numbers:
Comments:
411, 3 MAIN BEARING ENGINE 3 MAINS
NISSAN
SENTRA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
69-70
CD17
SENTRA
Cyl Bore:
Thrust Width:
385
83-87
3.150" (80.01 MM)
@ #3
R16
R16
CD17

Make
Liter
CID
Vin
Model
Year
NISSAN
4 Cylinders
1.8
NISSAN
108
L18
Stroke: 3.071" (78.003 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
A87, A870
Casting Numbers:
Comments:
NISSAN
1.8
108
1.8
110
1.8
1.8
2.0
110
2.0
2.0
2.0
NISSAN
2.0
84-86
PULSAR
119
80
81
510
74-79
Cyl Bore:
3.346" (84.988 MM)
Thrust Width:
1.236
Z20S
510
Z20S
386
Z20E
80
L20B
Z20S
3.346" (84.988 MM)
510
Cyl Bore:
Z20E
3.346" (84.988 MM)
Cyl Bore:
119
@ #3
200SX
L20B
CA18DE
3.346" (84.988 MM)
Cyl Bore:
119
88-89
3.268" (83.007 MM)
200SX
Z20E
CA18ET
3.268" (83.007 MM)
Cyl Bore:
119
CA18ET
@ #3
87-88
Z20E
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
Comments:
2BC, 510 P/UP
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
U60
Casting Numbers:
Comments:
2BC, 510 P/UP
3.268" (83.007 MM)
Thrust Width:
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
U60, U6040
Casting Numbers:
Comments:
2BC, 510, 610, 710, 720 P/UP, 200SX
NISSAN
Cyl Bore:
CA18D
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
Comments:
EFI, 200SX
NISSAN
1.7303-1.7342" (43.950-44.050 MM)
Cyl Bore:
119
QG18D
Thrust Width:
Cyl Bore:
110
00-04
3.1495-3.1508" (80.000-80.030 MM)
CA18E
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
Comments:
EFI, 200SX
NISSAN
SENTRA
Thrust Width:
Stroke: 3.307" (83.998 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
2.0848-2.0853" (52.954-52.967 MM)
Main:
Main:
Comments:
DOHC, EFI, PULSAR, 16 VALVE
NISSAN
L18
Cyl Bore:
CA18E
Stroke: 3.307" (83.998 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
2.0848-2.0853" (52.954-52.967 MM)
Main:
Main:
D0242
Casting Numbers:
Comments:
VIN CA18ET, TURBO, EFI
NISSAN
73-74
OHC, 2BC
Stroke: 3.291" (83.591 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
2.0848-2.0853" (52.954-52.967 MM)
Main:
Main:
D0242
Casting Numbers:
Comments:
SOHC, TURBO, EFI
NISSAN
(cont.)
3.346" (84.988 MM)
Cyl Bore:
Stroke: 3.465" (88.000 MM)

1.5731-1.5738" (39.956-39.974 MM)
Rods:
1.9661-1.9671" (49.940-49.964 MM)
Main:
Main:
Comments:
MFI, DOHC, SENTRA
NISSAN
Engine Model
81
3.346" (84.988 MM)
Z20S

Make
Liter
CID
Vin
Model
Year
NISSAN
4 Cylinders
2.0
NISSAN
119
L20B
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
U60, U6040
Casting Numbers:
Comments:
NISSAN
NISSAN
2.0
119
80-80
Cyl Bore:
3.346" (84.988 MM)
Thrust Width:
1.236
Cyl Bore:
3.346" (84.988 MM)
Z20
2.0
120
2.0
120
Stroke: 3.465" (88.011 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
2.0848-2.0853" (52.954-52.967 MM)
Main:
Main:
Comments:
EFI, STANZA, 200SX
2.0
NISSAN
2.0
Comments:
NISSAN
@ #3
82-83
Thrust Width:
121
CA20S
@ #3
H20
77-92
Cyl Bore:
3.433" (87.198 MM)
Main Fillet:
.098
H20
GAS/LPG FORKLIFT CRANKSHAFT BEND: LESS THAN .0008
2.0
121
H20-II
2.0
121
2.0
Stroke: 3.390" (86.100 MM)

1.8880-1.8887" (47.956-47.974 MM)
Rods:
2.1636-2.1646" (54.956-54.980 MM)
Main:
Main:
Comments:
DOHC,SFI, 200SX, SENTRA
122
U20
200SX
Cyl Bore:
387
93-02
H20-II
3.4331-3.4350" (87.200-87.250 MM)
Cyl Bore:
Stroke: 3.268" (83.007 MM)

Cyl Bore:
2.0457-2.0462" (51.961-51.973 MM)
Rods:
2.4780-2.4785" (62.941-62.954 MM)
Main:
Main:
78240
Casting Numbers:
Comments:
OHC, U-20 GAS/LPG FORKLIFT CRANKSHAFT BEND: LESS THAN .0008
NISSAN
CA20E
3.307" (83.998 MM)
Cyl Bore:
Stroke: 3.268" (83.007 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
2.4780-2.4785" (62.941-62.954 MM)
Main:
Main:
Comments:
OHV, GAS
NISSAN
87-89
CA20S
Stroke: 3.268" (83.007 MM)

2.0457-2.0462" (51.961-51.973 MM)
Rods:
2.4780-2.4785" (62.941-62.954 MM)
Main:
Main: Numbers:
78240
Casting
CA20E
3.327" (84.506 MM)
Thrust Width:
120
84-86
3.3271-3.3284" (80.508-84.541 MM)

ROLLED
.968" (24.587 MM)
ROLLED
1.099 @ #3
200SX
Cyl Bore:
Stroke: 3.465" (88.011 MM)

1.7701-1.7706" (44.961-44.973 MM)
Rods:
2.0848-2.0853" (52.954-52.967 MM)
Main:
Main:
Comments:
2BC
Z20
@ #3
200SX
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.0848-2.0853" (52.954-52.967 MM)

Main:
Main:
1.298-1.300" (32.969-33.02 MM)
3.304" (83.922 MM)
Rear Seal Diameter:
D1742
Casting Numbers:
Comments:
EFI, STANZA, 200SX OIL PUMP FLAT 1.339-1.134/DIA 1.445
NISSAN
L20B
84-86
Thrust Width:
3.465" (88.011 MM)

1.7701-1.7706" (44.961-44.973 MM)
NISSAN
(cont.)
2BC
Stroke: 3.386" (86.004 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
U6040
Casting Numbers:
Comments:
2BC, PICKUP
Stroke:
Rods:
Engine Model
67-70
U20
3.433" (87.198 MM)
95-99
SR20DE
3.3858-3.3870" (85.999-86.030 MM)

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
4 Cylinders
2.0
122
SR20
Stroke: 3.390" (86.106 MM)

1.8880-1.8887" (47.955-47.973 MM)
Rods:
2.1636-2.1646" (54.955-54.981 MM)
Main:
Main:
DOHC, VIN G, SR20DE, EFI, NX, SENTRA
Comments:
NISSAN
2.1
2.2
K21
Thrust Width:
SD22
2.2
133
Z22
NISSAN
2.2
133
NISSAN
2.2
133
Z22
2.3
140
NISSAN
2.4
NISSAN
2.4
146
NISSAN
2.4
Cyl Bore:
3.425" (86.995 MM)
Cyl Bore:
3.504" (89.002 MM)
82-83
82-87
240SX
240SX
240SX
Cyl Bore:
388
Z22
Z22E
SD23
@ #4
89-90
KA24E
89-91
KA24E
3.5039-3.5051" (88.999-89.03 MM)
Cyl Bore:
146
Z22
3.5039-3.5051" (88.999-89.03 MM)
Cyl Bore:
146
82
3.425" (86.995 MM)
Stroke: 3.779" (95.987 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
SOHC, 240SX
Stroke: 3.780" (96.012 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
SOHC, KA24E, 240SX
720 PICKUP
Thrust Width:
Stroke: 3.779" (95.987 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
SOHC, 240SX
81
Cyl Bore:
SD23
Stroke: 3.622" (91.999 MM)

2.0832-2.0837" (52.913-52.926 MM)
Rods:
2.7916-2.7921" (70.907-70.919 MM)
Main:
Main:
Comments:
DIESEL
SD22
3.425" (86.995 MM)
Z22E
Stroke: 3.622" (91.999 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
#1 2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
60, 90-21-0, OWG
Casting Numbers:
Comments:
EFI
NISSAN
81-83
3.2680-3.2693" (83.007-83.040 MM)

.138" (3.505 MM)
.118"
1.578 @ #4
720 PICKUP
Cyl Bore:
Stroke: 3.622" (91.999 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3600-2.3606" (59.944-59.959 MM)
Main:
Main:
Comments:
2BC, 720 P/UP
@ #5
SD22
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.622" (91.999 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3600-2.3606" (59.944-59.959 MM)
Main:
Main:
Comments:
2BC, 720 P/UP
K21
3.5039-3.5059" (89.000-89.050 MM)
Cyl Bore:
Stroke: 3.937" (100. MM)

2.0832-2.0837" (52.913-52.926 MM)
Rods:
2.7916-2.7921" (70.907-70.919 MM)
Main:
Main:
2.820" (71.628 MM)
Rear Seal Diameter:
E SD22
Casting Numbers:
Comments:
OHV, DIESEL
NISSAN
SR20DE
@ #3
Thrust Width:
126
132
91-96
(cont.)
3.3858-3.3870" (85.999-86.03 MM)
Cyl Bore:
Stroke: 3.268" (83.000 MM)

1.7701-1.7706" (44.961-44.974 MM)
Rods:
2.4780-2.4785" (62.942-62.955 MM)
Main:
Main:
Balance: Internal
FU4
Casting Numbers:
Comments:
GAS OR LPG, KUBOTA FORKLIFT
NISSAN
SENTRA
Engine Model
92-94
3.504" (89.002 MM)
KA24E

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
4 Cylinders
2.4
146
Stroke: 3.780" (96.012 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
FRONTIER DOHC, EFI, VIN D 1998-01
Comments:
NISSAN
2.4
146
Z24
2.4
146
NISSAN
2.4
NISSAN
2.4
720 PICKUP
146
ALTIMA
2.4
146
NISSAN
2.5
AXXESS
Z24I
2.5
2.5
NISSAN
2.5
Stroke: 3.937" (100.000 MM)

2.2407-2.2412" (56.913-56.926 MM)
Rods:
2.7916-2.7921" (70.907-70.920 MM)
Main:
Main:
Comments:
DIESEL
Z24I
@ #3
91-98
3.504" (89.002 MM)
Thrust Width:
1.066 @ #3
152
152
86-90
KA24E
H25
H25
3.6220-3.6240" (92.000-92.050 MM)
K25
Stroke: 3.937" (100.000 MM)

1.7701-1.7706" (44.961-44.974 MM)
Rods:
2.4780-2.4785" (62.942-62.955 MM)
Main:
Main:
Balance: Internal
Comments:
GAS OR LPG
NISSAN
KA24E
3.5039-3.5043" (88.999-89.009 MM)
STANZA
Cyl Bore:
Stroke: 3.937" (100. MM)

2.0832-2.0837" (52.913-52.926 MM)
Rods:
2.7916-2.7921" (70.907-70.919 MM)
Main:
Main:
Comments:
DIESEL *** 5 MAIN CRANK = 1.265"
90
Cyl Bore:
151
KA24DE
3.504" (89.002 MM)
PATHFINDER
Stroke: 3.661" (92.989 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.4780-2.4785" (62.941-62.954 MM)
Main:
Main:
Comments:
OHV, GAS
NISSAN
91-97
3.5039-3.5051" (88.999-89.03 MM)
Stroke: 3.780" (96.012 MM)

Cyl Bore:
1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
Thrust Width:
Comments:
SOHC, EFI, PATHFINDER, CARGOVAN, 720 P/UP,D21 P/UP
NISSAN
Z24
1.264 @ #3
Stroke: 3.780" (96.012 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
3.149" (79.985 MM)
Rear Seal Diameter:
30R, 40F, 86G
Casting Numbers:
Comments:
SOHC, KA24E, EFI, 102 LINK TIMING CHAIN, 720 PU
83-89
Thrust Width:
Cyl Bore:
146
KA24DE
3.5039-3.5051" (88.999-89.03 MM)
Cyl Bore:
Stroke: 3.780" (96.012 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
SOHC, EFI, AXXESS
95-01
Cyl Bore:
Stroke: 3.780" (96.012 MM)

1.9668-1.9675" (49.957-49.975 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
DOHC, SFI, ALTIMA, 240SX, SENTRA
(cont.)
3.5039-3.5051" (88.999-89.030 MM)
Cyl Bore:
Stroke: 3.780" (96.012 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
#1 2.3599-2.3604" (59.941-59.954 MM)
Main:
Main:
3.150" (80.01 MM)
Rear Seal Diameter:
3141
Casting Numbers:
Comments:
EFI, SOHC, 106 LINK TIMING CHAIN, 720 P/UP
NISSAN
240SX
Engine Model
K25
Cyl Bore:
3.5039-3.5059" (89.000-89.050 MM)
Thrust Width:
@ #5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.504" (89.002 MM)

.138" (3.505 MM)
.118
1.578 @ #4 for 3 main crank***
SD25
83-87
152
TD25
Cyl Bore:
389
88-92
3.6575" (92.900 MM)
SD25
TD25

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
Engine Model
4 Cylinders
2.5
153
(cont.)
ALTIMA
02-04
QR25DE
TD27
88-92
TD27
1.7699-1.7706" (44.955-44.973 MM)

Rods:
2.1635-2.1345" (54.953-54.216 MM)
Main:
Main:
MFI, DOHC, ALTIMA
Comments:
NISSAN
2.7
163
Stroke: 3.6220" (92.000 MM)

2.2407-2.2412" (56.914-56.926 MM)
Rods:
2.7916-2.7921" (70.907-70.919 MM)
Main:
Main:
Comments:
DIESEL
NISSAN
3.5
211
FD35T
Stroke: 4.125" (104.775 MM)

2.4380-2.4388" (61.925-61.946 MM)
Rods:
2.9890-2.9898" (75.921-75.941 MM)
Main:
Main:
Comments:
TURBO DIESEL, 1100 SERIES UD TRUCK
NISSAN
4.6
282
4.7
86-90
FD46T
99-04
FD46TA
4.2520-4.2531" (108.000-108.030 MM)
Cyl Bore:
288
FD35T
4.0354-4.0358" (102.499-102.509 MM)
Cyl Bore:
Stroke: 4.960" (126.000 MM)

2.5561-2.5569" (64.925-64.945 MM)
Rods:
3.0677-3.0685" (77.920-77.940 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ, OHV, UD1200, UD1400, UD1800CS
NISSAN
3.7800" (96.012 MM)

.138" (3.505 MM)
.118" (2.997 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
J05D-TA
05-06
J05D-TA
4.4094" (112.000 MM)

Stroke: 4.724" (120.000 MM)
Cyl Bore:
2.5567-2.5574" (64.940-64.960 MM)
Rods:
3.1473-3.1480" (79.940-79.960 MM)
Main:
Main:
Comments:
DIESEL, TURBO, VERTICAL, WATER COOLED, DIR INJ CENTER JOURNAL WIDTH 1.417" (36.000 MM)
NISSAN
NISSAN
6 Cylinders
2.0
121
RB20E
Stroke: 2.7441" (69.700 MM)

1.6520-1.6525" (41.961-41.974 MM)
Rods:
2.1634-2.1644" (54.951-54.975 MM)
Main:
Main:
SOHC
Comments:
NISSAN
2.4
146
L24
Stroke: 2.902" (73.711 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
3141, E3141, E3142
Casting Numbers:
Comments:
2BC
NISSAN
2.4
SKYLINE
146
240Z
3.268" (83.007 MM)
Thrust Width:
1.264
L24E
NISSAN
2.4
146
MAXIMA
NISSAN
2.5
152
NISSAN
2.6
Stroke: 3.110" (78.994 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
#1 2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
Comments:
2BC, 260Z
156
L24
81-84
L24E
3.268" (83.007 MM)
@ #4
L24E
77-80
RB25D
SKYLINE
260Z
Cyl Bore:
390
89-99
RB25DE
3.3858-3.3870" (86.000-86.030 MM)
Cyl Bore:
L26
L24E
3.268" (83.007 MM)
Cyl Bore:
Stroke: 2.823" (71.700 MM)

1.8882-1.8888" (47.961-47.974 MM)
Rods:
2.0634-2.1644" (54.951-54.975 MM)
Main:
Main:
Comments:
DOHC, ALSO TURBO ENGINE MODEL RB25DET
RB20E
70-73
Cyl Bore:
Stroke: 2.902" (73.711 MM)

Cyl Bore:
1.7700-1.7706" (44.958-44.973 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
Thrust Width:
W3140
Casting Numbers:
Comments:
EFI, MAXIMA SMALL ROD JOURNAL (2 DIFF CRANKS)
Stroke: 2.913" (73.99 MM)

1.9670-1.9675" (49.962-49.975 MM) *
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
E3140, E3141, E3142
Casting Numbers:
Comments:
EFI * 7/82-> ROD DIAM 1.7697-1.7706"
89-99
3.0689-3.0709" (77.950-78.000 MM)
Cyl Bore:
74
3.268" (83.007 MM)
L26

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
6 Cylinders
2.6
157
RB26D
Stroke: 2.902" (73.700 MM)

1.8882-1.8888" (47.961-47.974 MM)
Rods:
2.1634-2.1644" (54.951-54.975 MM)
Main:
Main:
DOHC, TURBO
Comments:
NISSAN
2.8
168
L28E
2.8
168
L28E
NISSAN
2.8
168
NISSAN
2.8
170
2.8
NISSAN
181
3.0
181
NISSAN
NISSAN
Cyl Bore:
3.327" (84.506 MM)
81-84
VG30
3.0
3.0
84-86
90-94
3.4252-3.4264" (87.-87.031 MM)
Thrust Width:
@ #4
300ZX
90-96
VG30DE
3.425" (86.995 MM)
Cyl Bore:
H30
Stroke: 3.268" (83.007 MM)

Cyl Bore:
2.0457-2.0462" (51.961-51.973 MM)
Rods:
2.4780-2.4785" (62.941-62.954 MM)
Main:
Main:
Thrust Width:
Comments:
GAS/LPG FORKLIFT CRANKSHAFT BEND: LESS THAN .0008
391
VG30ET
@ #4
300ZX
181
LD28
3.425" (86.995 MM)
Thrust Width:
VG30
L28ET
RD28
200SX
Cyl Bore:
181
L28E
3.3464" (85.000 MM)
Cyl Bore:
Stroke: 3.268" (83.007 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
Comments:
DOHC, EFI, 300ZX, 3 STD PISTONS
Stroke: 3.268" (83.007 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
VG30
Casting Numbers:
Comments:
DOHC, EFI, 300ZX, NON TURBO
81-83
3.386" (86.004 MM)
RD28
Stroke: 3.268" (83.007 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4790-2.4793" (62.967-62.974 MM)
Main:
Main:
VG30
Casting Numbers:
Comments:
SOHC, EFI, TURBO, 200SX, 300ZX, MAXIMA, P/UP
NISSAN
280ZX
Cyl Bore:
3.0
81-83
Cyl Bore:
172
Stroke: 3.2677" (83.000 MM)

1.9670" (49.962 MM)
Rods:
2.1635" (54.953 MM)
Main:
Main:
Comments:
DIESEL
L28E
3.386" (86.004 MM)
LD28
Stroke: 3.268" (83.007 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
Comments:
DIESEL
NISSAN
75-80
280ZX
L28ET
RB26DETT
3.386" (86.004 MM)
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
Comments:
EFI, TURBO, 280ZX
89-99
280ZX
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
Comments:
EFI, 280ZX
(cont.)
3.3858-3.3870" (86.000-86.030 MM)
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.9670-1.9675" (49.962-49.975 MM)
Rods:
2.1631-2.1636" (54.943-54.955 MM)
Main:
Main:
Comments:
EFI, 280Z, 280ZX
NISSAN
SKYLINE
Engine Model
H30
3.433" (87.198 MM)
1.340" @ # 2

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
6 Cylinders
3.0
181
VG30
Stroke: 3.268" (83.007 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4790-2.4793" (62.967-62.974 MM)
Main:
Main:
VG30
Casting Numbers:
Comments:
NISSAN
MAXIMA
Cyl Bore:
Engine Model
(cont.)
84-87
VG30
3.425" (86.995 MM)
@ #4
Thrust Width:
SOHC, EFI, 200SX, 300ZX, MAXIMA, P/UP
3.0
181
VG30
MAXIMA
87-95
VG30E
3.4252-3.4264" (87.-87.031 MM)

Stroke: 3.268" (83.007 MM)
Cyl Bore:
1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4784-2.4793" (62.951-62.974 MM) *
Main:
@ #4
Main:
Thrust Width:
1.298"
VG30
Casting Numbers:
Comments:
SOHC, EFI,TURBO, VG30ET, MAXMA, 200SX300ZX, PTHFDR * 5 STD MAIN BEARINGS AVLBL
NISSAN
3.0
181
VG30E
Stroke: 3.268" (83.007 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
VG30
Casting Numbers:
Comments:
SOHC, EFI, MAXIMA
NISSAN
3.0
181
3.0
Thrust Width:
NISSAN
3.0
181
3.0
182
NISSAN
3.3
199
NISSAN
3.3
201
PATHFINDER
3.5
213
VG30I
3.4252-3.4272" (87.000-87.050 MM)
Thrust Width:
1.634" (41.500 MM)
Cyl Bore:
3.6614" (93. MM)
Cyl Bore:
3.2669-3.2693" (82.979-83.04 MM)
95-00
VQ30DE
81-83
PATHFINDER
Stroke: 3.270" (83.058 MM)

Cyl Bore:
1.9667-1.9675" (49.954-49.975 MM)
Rods:
Rod Fillet:
2.4784-2.4793" (62.951-62.974 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
SOHC, PATHFINDER, ENG. CODE A, FRONTIER, XTERRA
NISSAN
86-89
Cyl Bore:
SD33
Stroke: 3.937" (100. MM)

2.0832-2.0837" (52.913-52.926 MM)
Rods:
2.7916-2.7921" (70.907-70.919 MM)
Main:
Main:
Comments:
OHV, DIESEL
VG30DETT
3.425" (86.995 MM)
Stroke: 2.8858" (73.299 MM)

1.7699-1.7706" (44.955-44.973 MM)
Rods:
2.3603-2.3612" (59.952-59.974 MM)
Main:
Main:
Comments:
DOHC, SFI, MAXIMA
VE30DE
@ #4
90-96
VG30I
Stroke: 3.2677" (83.000 MM)

1.9667-1.9675" (49.955-49.974 MM)
Rods:
2.4784-2.4793" (62.951-62.975 MM)
Main:
Main:
Comments:
SOHC, PATHFINDER
NISSAN
92-94
3.4252-3.4264" (87.-87.031 MM)
Stroke: 3.268" (83.007 MM)

Cyl Bore:
1.9667-1.9675" (49.954-49.975 MM)
Rods:
#1 2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
VG30
Casting Numbers:
Comments:
DOHC, TURBO, PFI, VG30DETT, 300 ZX TWIN TURBO
VG30E
@ #4
MAXIMA
Cyl Bore:
181
87-97
3.4252-3.4264" (87.-87.031 MM)
Thrust Width:
Stroke: 3.268" (83.007 MM)

1.9667-1.9675" (49.954-49.975 MM)
Rods:
2.4784-2.4793" (62.951-62.974 MM)
Main:
Main:
Comments:
DOHC, PSI, VE30DE, MAXIMA
NISSAN
MAXIMA
Cyl Bore:
VQ35D
392
VG33E
3.6020-3.6030" (91.490-91.516 MM)

ROLLED
ROLLED
@ #3
PATHFINDER
Stroke: 3.205" (81.400 MM)

Cyl Bore:
2.0455-2.0462" (51.956-51.974 MM)
Rods:
2.3603-2.3612" (59.951-59.974 MM)
Main:
Main:
Comments:
DOHC, MPI, 24 VALVE, PATHFINDER XE * ACTUAL CLEARANCE
96-04
SD33
01-05
VQ35DE
3.7598-3.7610" (95.500-95.530 MM)

Make
Liter
CID
Vin
Model
NISSAN
NISSAN
6 Cylinders
4.0
241
Stroke: 4.488" (113.995 MM)

2.2492-2.2500" (57.13-57.15 MM)
Rods:
#1 2.6852-2.6862" (68.204-68.229 MM)
Main 1:
2-7 2.7274-2.7283" (69.276-69.299 MM)
Main 2:
P PF INDUSTRIAL GAS
Comments:
NISSAN
4.0
4.0
243
Stroke: 3.937" (100. MM)

2.2810-2.2820" (57.937-57.963 MM)
Rods:
2.7540-2.7550" (69.952-69.977 MM)
Main:
Main:
Comments:
OHV, DIESEL, USED BY JEEP
NISSAN
4.2
NISSAN
4.2
(cont.)
65-78
PF
3.3740" (85.7 MM)
Cyl Bore:
3.3736-3.3756" (85.690-85.740 MM)
Cyl Bore:
3.6200-3.6213" (91.948-91.981 MM)
79-86
P40
DIESL
Thrust Width:
254
Stroke: 3.7795-3.7815" (95.999-96.05 MM)

2.2407-2.2412" (56.914-56.926 MM)
Rods:
2.7918-2.7921" (70.912-70.919 MM)
Main:
Main:
Comments:
OHV, ALUMNIUM HEAD, GAS, FORKLIFT
Engine Model
Cyl Bore:
241
Stroke: 4.488" (113.995 MM)

2.2492-2.2500" (57.13-57.15 MM)
Rods:
2.7274-2.7283" (69.276-69.299 MM)
Main:
Main:
Comments:
OHV, GAS, P40, PU340, INDUSTRIAL
NISSAN
Year
TB42
90-97
TB42
3.7795-3.7815" (95.999-96.05 MM)
Cyl Bore:
254
@ #7
TD42T
90-99
TD42T
3.7795-3.7807" (95.999-96.03 MM)

Stroke: 3.7795" (95.999 MM)
Cyl Bore:
2.2409-2.2412" (56.919-56.926 MM)
Rods:
2.7916-2.7921" (70.907-70.919 MM)
Main:
Main:
Comments:
OHV, UD 1400 D, WC, 4-STROKE, 1995 + UP TD42TI THRUST WASHER THICKNESS .0901-.0935" STD,
OVERSIZE THRUST WASHERS AVAILLABLE
NISSAN
5.7
345
Stroke: 4.724" (120.000 MM)

2.4378-2.4386" (61.920-61.940 MM)
Rods:
2.9890-2.9898" (75.921-75.941 MM)
Main:
Main:
Comments:
DIESEL
NISSAN
6.9
423
Stroke: 4.960" (125.984 MM)

2.5561-2.5569" (64.925-64.945 MM)
Rods:
#1 3.0681-3.0689" (77.93-77.95 MM)
Main:
Main:
Balance: Internal
1.7745-1.7728" (45.072-45.029 MM)
4.3298-4.3307" (109.977-110. MM)
Rear Seal Diameter:
Comments:
TURBO AND NON-TURBO
NISSAN
6.9
6.9
FE6
80-90
FE6
4.2520-4.2531" (108.001-108.029 MM)
Thrust Width:
1.2952-1.3031 @ #7
FE6T
88-91
FE6T
Cyl Bore:
4.2520-4.2531" (108.001-108.029 MM)
Thrust Width:
1.2952-1.3031 @ #7
423
Stroke: 4.960" (125.984 MM)

2.5561-2.5569" (64.925-64.945 MM)
Rods:
#1 3.0681-3.0689" (77.93-77.95 MM)
Main:
Main:
Balance: Internal
1.7745-1.7728" (45.072-45.029 MM)
4.3298-4.3307" (109.977-110. MM)
Rear Seal Diameter:
Comments:
TURBO INTERCOOLED 1800 TRUCK
FD6
3.937-3.938" (100.000-100.025 MM)
Cyl Bore:
423
Stroke: 4.960" (125.984 MM)

2.5561-2.5569" (64.925-64.945 MM)
Rods:
#1 3.0681-3.0689" (77.93-77.95 MM)
Main:
Main:
Balance: Internal
1.7745-1.7728" (45.072-45.029 MM)
4.3298-4.3307" (109.977-110. MM)
Rear Seal Diameter:
Comments:
TURBO 1800 TRUCK
NISSAN
FD6
Cyl Bore:
FE6TA
92-97
FE6TA
Cyl Bore:
4.2520-4.2531" (108.001-108.029 MM)
Thrust Width:
1.2952-1.3031@ #7
393

Make
Liter
CID
Vin
Model
Year
NISSAN
NISSAN
6 Cylinders
6.9
423
UD
Stroke: 4.960" (126.000 MM)

Cyl Bore:
2.5561-2.5569" (64.925-64.945 MM)
Rods:
3.0681-3.0689" (77.930-77.950 MM)
Main:
Main:
DIESEL,OHV,UD1800HD,2000,2300DH/LP,2600,3000,3300
Comments:
NISSAN
7.4
452
10.3
11.7
85-94
PD6T
Stroke: 5.512" (140.005 MM)

Cyl Bore:
3.1453-3.1461" (79.891-79.911 MM)
Rods:
3.9319-3.9327" (99.87-99.891 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL PD6 & PD6T THRUST WASHER THKNS: .155-.158
NISSAN
712
FE6TA
NE6
4.3300" (109.982 MM)
Cyl Bore:
629
(cont.)
4.2520-4.2531" (108.000-108.030 MM)
NE6
Stroke: 5.1200" (130.048 MM)

3.5382-3.5390" (89.87-89.891 MM)
Rods:
3.5395-3.5405" (89.903-89.929 MM)
Main:
Main:
Comments:
TURBO AND NON-TURBO DIESEL ENGINES
NISSAN
98-04
Engine Model
PD6T
4.9213" (125.001 MM)
@ #7
PE6T
PE6T
5.2362-5.2382" (132.999-133.05 MM)

Stroke: 5.512" (140.005 MM)
Cyl Bore:
3.1453-3.1461" (79.891-79.911 MM)
Rods:
3.9319-3.9327" (99.87-99.891 MM)
Main:
@ #7
Main:
Thrust Width:
Comments:
DIESEL PE6, PE6T,PE6T04,KEBELCO LK900 WHEEL LOADER THRUST WASHER THKNS: .155-.158
NISSAN
NISSAN
9 Cylinders
5.6
339
VK56
Stroke: 3.622" (92.000 MM)

2.1243-2.1250" (53.956-53.974 MM)
Rods:
2.5174-2.5183" (63.940-63.964 MM)
Main:
Main:
DOHC, ARMADA, TITAN
Comments:
PATHFINDER
Cyl Bore:
OLIVER
OLIVER
129
49-54
2.3
2.3
OLIVER
2.5
3.313" (84.15 MM)

7/64 (.109) (NM)
7/64 (.109)
1.6310
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.500" (88.9 MM)

7/64 (.109")
7/64 (.109")
1.631
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.5000" (88.9 MM)

7/64 (.109")
7/64 (.109")
1.631
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.6250" (92.075 MM)

.109" (2.769 MM)
.109" (2.769 MM)
1.631
55-59
144
Stroke: 3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
181211, 181411
Casting Numbers:
Comments:
SUPER 66HC SMALL RODS-SERIAL #6502
Stroke: 3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
181211, 181411
Casting Numbers:
Comments:
660 HC
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
144
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
181211, 181411
Casting Numbers:
Comments:
66KD SMALL RODS-SERIAL #6502
OLIVER
VK56
4 Cylinders
2.1
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
181211, 181411
Casting Numbers:
OLIVER
04-05
3.8583-3.8594" (98.000-98.030 MM)
144
55-59
55-59
394
66KD
SUPER 66HC
660 HC

Make
Liter
CID
Vin
Model
OLIVER
OLIVER
4 Cylinders
2.5
155
3.1
Engine Model
(cont.)
59-67
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
181211, 181411
Casting Numbers:
OLIVER
Year
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
191
3.625" (92.075 MM)

7/64 (.109")
7/64 (.109")
1.631
1355
3.7402-3.7411" (95.001-95.024 MM)

Stroke: 4.3310" (110.007 MM)
Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
1.260-1.264
Main:
Thrust Width:
Comments:
DIESEL FIAT THRUST WASHER THCKNESS STD .1330-.1350
.005 O.S AVLBL
OLIVER
3.4
210
1365
3.9370-3.9379" (100.-100.023 MM)

Stroke: 4.331" (110.007 MM)
Cyl Bore:
2.3122-2.3127" (58.73-58.743 MM)
Rods:
2.9995-3.0000" (76.187-76.2 MM)
Main:
1.260-1.264
Main:
Thrust Width:
Comments:
DIESEL G450, FIAT THRUST WSHR THKNS STD .1330-.1350, .005 O.S. AVLBL
OLIVER
4.6
278
B10
Stroke: 4.724" (120.000 MM)

2.7504-2.7511" (69.860-69.878 MM)
Rods:
3.0000-3.0007" (76.202-76.220 MM)
Main:
Main:
Comments:
DIESEL, FIAT ENGINE
OLIVER
OLIVER
6 Cylinders
3.2
194
48-67
Stroke: 3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
185111, 186211, 186211A
Casting Numbers:
OLIVER
3.4
3.5
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.313" (84.15 MM)

3/32 (.094")
3/32 (.094")
1.631
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.188" (80.975 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.241
209
35-51
Stroke: 4.375" (111.125 MM)

1.9365-1.9375" (49.187-49.213 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
D600C-601, D600C-602, D600C-603
Casting Numbers:
Comments:
CONTINENTAL SMALL RODS
OLIVER
B10
4.3307-4.3315" (110.000-110.022 MM)
Cyl Bore:
216
770
55-67
3.500" (88.9 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.2490-2.2500*" (57.125-57.15 MM)
3/32 (.094")
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
3/32 (.094")
Main:
Main Fillet:
1.631
Main:
Thrust Width:
185111, 186211A, 186311
Casting Numbers:
Comments:
770 GAS TRACTOR LARGE RODS FROM SERIAL #6502, SMALL: 1.9990-2.0000
OLIVER
3.5
216
77KD
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main Fillet:
Main:
Thrust Width:
185111, 186211, 186211A, 186311
Casting Numbers:
Comments:
77KD DIESEL TRACTOR LARGE RODS FROM SERIAL #6502
OLIVER
3.8
232
1550
1.999-2.000" (50.774-50.800 MM) * SEE COMMENT

Rods:
ALL 2.249-2.250 (57.124-57150 MM)
Main:
Main:
191311, 195311
Casting Numbers:
Comments:
88D, 1550, 1555, DIESEL TRACTOR * ALSO USED 2.249-2.250" (57.124-
395
55-67
3.500" (88.9 MM)
3/32 (.094")
3/32 (.094")
1.631

Make
Liter
CID
Vin
Model
Year
OLIVER
OLIVER
6 Cylinders
4.3
265
1650
Stroke: 4.000" (101.6 MM)

2.4365-2.4375" (61.887-61.913 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
190111, 190211, 191311, 195311
Casting Numbers:
Comments:
OLIVER
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
283
(cont.)
47-67
880
3.750" (95.25 MM)

1/8 (.125")
1/8 (.125")
1.756
880 OLIVER DIESEL, 1650 TRACTOR LARGE RODS FROM SERIAL #6502
4.6
Engine Model
4 MAIN CRANKSHAFT
1650
221211, 221211C
Casting Numbers:
Comments:
1650 DIESEL, SEE WAUKESHA SECTION, 1800 B SERIES
OLIVER
5.0
302
47-62
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
190111, 190211, 195111, 195311
Casting Numbers:
Comments:
99
OLIVER
5.1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
310
4.000" (101.6 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.754" (44.552 MM)
VRD310
VRD SERIES
3.875" (98.425 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
1.5025-1.5045
Main:
Thrust Width:
221411
Casting Numbers:
Comments:
VRD SERIES DIESEL, 1755, 1800, 1900, 1955T THRUST BRG THKNS 1.495-1.498
OLIVER
5.3
322
47-62
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
195111, 195311
Casting Numbers:
OLIVER
5.8
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
354
1850
Stroke: 5.00" (127. MM)

2.4988-2.9996" (63.47-76.19 MM)
Rods:
2.9984-2.9996" (76.159-76.19 MM)
Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
6.354 PERKINS, DIESEL NON-TURBO
OLIVER
7.0
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
425
7.4
451
D451
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
Comments:
DIESEL
OLIVER
7.8
OLIVER
8.3
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
Comments:
LP GAS MINI-MOLINE ENGINE
4.250" (107.95 MM)
Cyl Bore:
4.375" (111.125 MM)
Cyl Bore:
478
Stroke: 4.880" (123.952 MM)

2.9970-2.9980" (76.124-76.149 MM)
Rods:
3.6210-3.6220" (91.973-91.999 MM)
Main:
Main:
10935419, 3803000, 403803000
Casting Numbers:
Comments:
2055, 2150 DIESEL TRACTORS
3.877-3.878" (98.476-98.501 MM)

.145-.156" (3.683-3.962 MM)
.145-.156" (3.683-3.962 MM)
1.759 MAX. @ #4
425C
Stroke: 5.000" (127. MM)

2.9115-2.9120" (73.952-73.965 MM)
Rods:
2.9110-2.9120" (73.939-73.965 MM)
Main:
Main:
Comments:
LP GAS
OLIVER
4.125" (104.775 MM)

.125" (3.175 MM)
.125" (3.175 MM)
1.754" (44.552 MM)
478
4.563" (115.9 MM)
Cyl Bore:
504
504B
Cyl Bore:
396
4.625" (117.475 MM)

Make
Liter
CID
Vin
Model
OLIVER
OLIVER
6 Cylinders
9.6
585
8 Cylinders
5.0
302
Stroke: 3.000" (76.2 MM)

2.1228-2.1236" (53.919-53.939 MM)
Rods:
2.2482-2.2490" (57.104-57.125 MM)
Main:
Main:
FORD ENGINE
Comments:
5.7
5.8
7.5
4.000" (101.6 MM)
Cyl Bore:
4.000" (101.6 MM)
Cyl Bore:
4.000" (101.6 MM)
351
Stroke: 3.500" (88.9 MM)

2.3103-2.3111" (58.682-58.702 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
3.750" (95.25 MM)
Main:
Rear Seal Diameter:
Comments:
FORD ENGINE
OMC
Cyl Bore:
350
Stroke: 3.480" (88.392 MM)

2.0988-2.0998" (53.31-53.335 MM)
Rods:
1 2.4484-2.4493" (62.189-62.212 MM)
Main 1:
2,3,4 2.4481-2.4490" (62.182-62.205 MM)
Main:
Main 2:
5 2.4479-2.4488" (62.177-62.2 MM)
Main 3:
Comments:
GM ENGINE
OMC
460
M460
Stroke: 3.850" (97.79 MM)

Cyl Bore:
2.4992-2.5000" (63.48-63.5 MM)
Rods:
2.9994-3.0002" (76.185-76.205 MM)
Main:
Main:
Comments:
FORD ENGINE THRUST BRG JOURNAL LENGTH 1.124-1.126
4.360" (110.744 MM)
ONAN
ONAN
1 Cylinder
0.2
12
Stroke: 2.503" (63.576 MM)

1.3742-1.3750" (34.905-34.925 MM)
Rods:
1.6857-1.6865" (42.817-42.837 MM)
Main:
Main:
GAS
Comments:
ONAN
0.3
0.3
15
0.4
ONAN
0.4
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
AJ
15
AJ
2.754-2.755" (69.952-69.977 MM)
MAJ
25
MAJ
2.752-2.753" (69.901-69.926 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
AK
2.502-2.503" (63.551-63.576 MM)
Cyl Bore:
Stroke: 2.503" (63.576 MM)

1.3742-1.3750" (34.905-34.925 MM)
Rods:
1.6857-1.6865" (42.817-42.837 MM)
Main:
Main:
Comments:
GAS
ONAN
AK
Cyl Bore:
Stroke: 2.503" (63.576 MM)

1.3742-1.3750" (34.905-34.925 MM)
Rods:
1.6857-1.6865" (42.817-42.837 MM)
Main:
Main:
Comments:
GAS
ONAN
(cont.)
4.7535-4.7545" (120.739-120.764 MM)
Cyl Bore:
OMC
OMC
Engine Model
D585
Stroke: 5.500" (139.7 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
3.4980-3.4990" (88.849-88.875 MM)
Main:
Main:
DIESEL
Comments:
OMC
Year
LK
25
LK
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
LKB
Cyl Bore:
397
LKB
3.249-3.250" (82.525-82.55 MM)

Make
Liter
CID
Vin
Model
ONAN
ONAN
1 Cylinder
0.5
30
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
DIESEL
Comments:
ONAN
0.5
30
0.5
30
NB
40
0.7
0.7
0.7
43
0.7
ONAN
0.7
0.8
ONAN
0.8
Stroke: 2.870" (72.898 MM)

1.625-1.626" (41.275-41.3 MM)
Rods:
1.999-2.000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
B43G
43
B43G
3.249-3.250" (82.525-82.55 MM)
B43M
43
B43M
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
BFA
43
BFA
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
P216
48
P216
3.2490-3.2500" (82.520-82.550 MM)
Cyl Bore:
Stroke: 2.870" (72.898 MM)

1.625-1.626" (41.275-41.3 MM)
Rods:
1.999-2.000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
B43E
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
Stroke: 2.620" (66.000 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
B43E
43
Stroke: 2.620" (66.548 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
BF
3.124-3.125" (79.35-79.375 MM)
Cyl Bore:
Stroke: 2.620" (66.548 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
BF
Cyl Bore:
Stroke: 2.620" (66.548 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
NB
3.5635-3.5645" (90.513-90.538 MM)
2 Cylinders
0.7
Stroke: 2.620" (66.548 MM)

1.625-1.626" (41.275-41.3 MM)
Rods:
1.999-2.000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
MDJA
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 2.620" (66.548 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
GAS
Comments:
ONAN
DJA
MDJA
ONAN
ONAN
(cont.)
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
Engine Model
DJA
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL
ONAN
Year
B48G
48
B48G
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
B48M
Cyl Bore:
398
B48M
3.249-3.250" (82.525-82.55 MM)

Make
Liter
CID
Vin
Model
ONAN
ONAN
2 Cylinders
0.8
48
Stroke: 2.870" (72.898 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
GAS
Comments:
ONAN
0.8
48
0.8
ONAN
0.8
ONAN
0.8
ONAN
0.8
ONAN
0.8
0.8
ONAN
0.8
0.8
ONAN
0.8
Stroke: 3.000" (76.2 MM)

1.6250-1.6252" (41.275-41.28 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
P248V
50
P248V
3.2490-3.2500" (82.520-82.550 MM)
BG
50
BG
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
CCK
50
CCK
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
CCKA
50
CCKA
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
CCKB
50
CCKB
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6250-1.6252" (41.275-41.28 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
P220
3.2490-3.2500" (82.520-82.550 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6225-1.6250" (41.212-41.275 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
P1428, P1554
Casting Numbers:
Comments:
GAS
ONAN
P220
48
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
P1428, P1554
Casting Numbers:
Comments:
GAS
P218
3.2490-3.2500" (82.520-82.550 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
P1428, P1554
Casting Numbers:
Comments:
GAS
ONAN
P218
48
Stroke: 3.000" (76.2 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
Comments:
GAS
BGM
3.250" (82.55 MM)
Cyl Bore:
Stroke: 2.875" (73.030 MM)

1.6252-1.6260" (41.280-41.300 MM)
Rods:
1.9992-2.0000" (50.780-50.800 MM)
Main:
Main:
Comments:
GAS
BGA
BGM
48
Stroke: 2.875" (73.000 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
(cont.)
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
Stroke: 2.875" (73.000 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
Engine Model
BGA
Cyl Bore:
Stroke: 2.875" (73.025 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
Year
MCCK
50
MCCK
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
RCCK
Cyl Bore:
399
RCCK
3.249-3.250" (82.525-82.55 MM)

Make
Liter
CID
Vin
Model
ONAN
ONAN
2 Cylinders
1.0
60
Stroke: 3.625" (92.075 MM)

2.0600-2.0605" (52.324-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
DIESEL, EVEN-FIRING
Comments:
ONAN
1.0
60
1.0
ONAN
1.0
ONAN
1.0
ONAN
1.0
ONAN
1.0
1.0
ONAN
1.0
1.0
ONAN
1.0
ONAN
1.0
N52M
60
MJB
3.249-3.250" (82.525-82.55 MM)
N52M
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
NH
60
NH
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
NHA
60
NHAV
NHAV
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
60
NHA
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
NHB
60
NHBV
NHBV
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
60
NHB
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
Stroke: 3.000" (76.2 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
MJB
60
Stroke: 3.000" (76.2 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
MDJB
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
MDJB
60
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
JB
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
JB
60
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
DJBA
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
GAS
DJB
DJBA
60
Stroke: 3.625" (92.075 MM)

2.0600-2.0605" (52.324-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL
(cont.)
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
GAS
Engine Model
DJB
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0600-2.0605" (52.324-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL, ODD-FIRING
ONAN
Year
NHC
Cyl Bore:
400
NHC
3.5625-3.5635" (90.488-90.513 MM)

Make
Liter
CID
Vin
Model
Year
ONAN
ONAN
2 Cylinders
1.0
60
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
GAS
Comments:
ONAN
1.0
60
1.0
60
ONAN
1.0
ONAN
ONAN
1.0
ONAN
DJE
70
1.2
MDJE
70
1.2
RDJE
70
RDJE
3.4995-3.5005" (88.887-88.913 MM)
RDJEA
RDJEA
3.4995-3.5005" (88.887-88.913 MM)
Cyl Bore:
ONAN
ONAN
MDJE
3.4995-3.5005" (88.887-88.913 MM)
Cyl Bore:
Stroke: 3.6250" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL
DJE
3.4995-3.5005" (88.887-88.913 MM)
Cyl Bore:
Stroke: 3.6250" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL
T-260G
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
1.2
P224
3.5625-3.5635" (90.490-90.510 MM)
T-260G
70
Stroke: 3.6250" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL
ONAN
P224
Cyl Bore:
1.2
NHPV
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
60
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2437-2.2445" (56.99-57.01 MM)
Main:
Main:
Comments:
DIESEL
ONAN
NHPV
60
1.0
NHP
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6250-1.6260" (41.275-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
ONAN
NHP
60
Stroke: 3.009" (76.429 MM)

1.6252-1.6260" (41.280-41.300 MM)
Rods:
1.9992-2.0000" (50.780-50.800 MM)
Main:
Main:
Comments:
GAS, 983CC ENGINE, 4-CYCLE, AIR COOLED
NHM
3.563" (90.5 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
NHCV
NHM
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS
(cont.)
3.5625-3.5635" (90.488-90.513 MM)
Cyl Bore:
Stroke: 3.000" (76.2 MM)

1.6252-1.6260" (41.28-41.3 MM)
Rods:
1.9992-2.0000" (50.78-50.8 MM)
Main:
Main:
Comments:
GAS & LPG
ONAN
NHCV
Engine Model
3 Cylinders
1.7
105
Stroke: 3.6220" (91.999 MM)

2.2043-2.2051" (55.989-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
DIESEL, 4 STROKE, LIQUID COOLED
Comments:
L317
Cyl Bore:
401
L317
3.5039" (88.999 MM)

Make
Liter
CID
Vin
Model
Year
ONAN
ONAN
4 Cylinders
0.9
57
RDJF
Stroke: 3.6250" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
DIESEL
Comments:
ONAN
2.0
120
2.0
DJC
120
2.0
JC
120
2.0
MDJC
120
2.0
MDJF
120
2.0
MJC
120
2.0
RDJC
120
RJC
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
GAS
ONAN
2.3
ONAN
2.3
Stroke: 3.6220" (91.999 MM)

2.2043-2.2051" (55.989-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, LIQUID COOLED
RJC
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
140
RDJC
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.01 MM)
Rods:
2.9917-2.9925" (75.989-76.01 MM)
Main:
Main:
Balance: Internal
6A3.4
Casting Numbers:
Comments:
ONAN L SERIES DIESEL
MJC
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
DIESEL
ONAN
MDJF
3.4995-3.5005" (88.887-88.913 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
GAS
ONAN
MDJC
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.6250" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
DIESEL
ONAN
JC
3.249-3.250" (82.525-82.55 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
DIESEL
ONAN
DJC
3.2495-3.2505" (82.537-82.563 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
GAS
ONAN
RDJF
2.2459-2.2489" (57.046-57.122 MM)
Cyl Bore:
Stroke: 3.625" (92.075 MM)

2.0597-2.0605" (52.316-52.337 MM)
Rods:
2.2427-2.2435" (56.965-56.985 MM)
Main:
Main:
Comments:
DIESEL
ONAN
Engine Model
L SERIES
L SERIES
Cyl Bore:
3.5034-3.5044" (88.986-89.012 MM)
Thrust Width:
1.337-1.341 @#6
140
L423
Cyl Bore:
402
L423
3.5039" (88.999 MM)

Make
Liter
CID
Vin
Model
Year
ONAN
6 Cylinders
3.4
ONAN
210
L SERIES
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.010 MM)
Rods:
2.9917-2.9925" (75.989-76.010 MM)
Main:
Main:
Balance: Internal
1703855, 6A34
Casting Numbers:
Comments:
3.4
210
3.5034-3.5044" (88.986-89.012 MM)
Thrust Width:
1.337-1.341" @ #6
TURBO
Stroke: 3.622" (91.999 MM)

2.2037-2.2051" (55.974-56.010 MM)
Rods:
2.9917-2.9925" (75.989-76.010 MM)
Main:
Main:
1703855, 6A34
Casting Numbers:
Comments:
TURBO DIESEL
L SERIES
3.5034-3.5044" (88.986-89.012 MM)
Thrust Width:
1.3366"
4 Cylinders
1.1
OPEL
66
Stroke: 2.402" (61.011 MM)

1.7705-1.7711" (44.971-44.986 MM)
Rods:
#1 2.1255-2.1260" (53.988-54. MM)
Main:
Main:
AD, DD
Casting Numbers:
1.2
74
1.5
90
OPEL
1.7
104
1.7
Cyl Bore:
2.835" (72.009 MM)
Thrust Width:
1.262
Cyl Bore:
3.150" (80.01 MM)
Thrust Width:
1.262
Cyl Bore:
3.346" (84.988 MM)
Thrust Width:
1.262
Cyl Bore:
3.465" (88.011 MM)
1.8
Cyl Bore:
3.307" (83.998 MM)
1.9
Stroke: 2.748" (69.799 MM)

2.0460-2.0467" (51.968-51.986 MM)
Rods:
#1 2.2830-2.2835" (57.988-58.001 MM)
Main:
Main:
BB, DK, RT
Casting Numbers:
Comments:
2BC, 1897CC 1897 CC
Cyl Bore:
3.661" (92.989 MM)
Thrust Width:
1.087
61-62
59-62
62-65
105
66
111
Stroke: 3.228" (81.991 MM)

1.9262-1.9268" (48.925-48.941 MM)
Rods:
2.2016-2.2022" (55.921-55.936 MM)
Main:
Main:
Comments:
2BC
OPEL
1.1440"
2.756" (70.002 MM)

2.0460-2.0467" (51.968-51.986 MM)
2.2830-2.2835" (57.988-58.001 MM)
OPEL
Thrust Width:
Stroke: 2.913" (73.99 MM)

2.0460-2.0467" (51.968-51.986 MM)
Rods:
#1 2.2830-2.2835" (57.988-58.001 MM)
Main:
Main:
2551383, 2551388, LR, UU
Casting Numbers:
Stroke:
Rods:
Main:
Main:
2.952" (74.981 MM)
Stroke: 2.913" (73.99 MM)

2.0460-2.0467" (51.968-51.986 MM)
Rods:
#1 2.2830-2.2835" (57.988-58.001 MM)
Main:
Main:
2551383, 2551388, LR, UU
Casting Numbers:
OPEL
65-73
Cyl Bore:
1078CC
Stroke: 2.912" (73.965 MM)

2.0460-2.0467" (51.968-51.986 MM)
Rods:
#1 2.2830-2.2835" (57.988-58.001 MM)
Main:
Main:
12551388, 2551383, 2551388, LR, UU
Casting Numbers:
OPEL
L SERIES
Cyl Bore:
OPEL
OPEL
L SERIES
Cyl Bore:
DIESEL
ONAN
Comments:
Engine Model
116
76-79
67-75
403

Make
Liter
CID
Vin
Model
PACKARD
PACKARD
Stroke:
Rods:
Main:
Main:
2 Cylinders
7.8
473
35-39
4.2500" (107.95 MM)

2.4990-2.5000" (63.475-63.5 MM)
2.7460-2.7470" (69.748-69.774 MM)
Cyl Bore:
Thrust Width:
PACKARD
PACKARD
3.4375" (87.313 MM)
@ #1
6 Cylinders
3.9
237
37
Stroke: 4.250" (107.95 MM)

2.0934-2.0944" (53.172-53.198 MM)
Rods:
#1 2.7455-2.7465" (69.736-69.761 MM)
Main:
Main:
315703
Casting Numbers:
Comments:
Year
Cyl Bore:
Rod Fillet:
3.4375" (87.313 MM)

1/8 (NM)
Thrust Width:
1.597 @ #1
115C
PACKARD
4.0
245
39-48
3.500" (88.9 MM)

Stroke: 4.250" (107.95 MM)
Cyl Bore:
2.2497-2.2507*" (57.142-57.168 MM)
1/8 (NM)
Rods:
Rod Fillet:
#1 2.7460-2.7470" (69.748-69.774 MM)
Main:
1.597 @ #1
Main:
Thrust Width:
315703, 389531
Casting Numbers:
Comments:
SIX 110, BEFORE SERIAL #35000 * EARLY ENGINES 1939-47: 2.0937-2.0947
PACKARD
PACKARD
8 Cylinders
4.6
282
35-47
Stroke: 4.250" (107.95 MM)

2.0937-2.0947" (53.18-53.205 MM)
Rods:
#1 2.7460-2.7470" (69.748-69.774 MM)
Main:
Main:
117111, 302811, 304852, 320428, C116-LM
Casting Numbers:
Comments:
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

1/8
Thrust Width:
1.597 @ #3
120 & 120B
PACKARD
4.7
288
48-54
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.2497-2.2507" (57.142-57.168 MM)
Rods:
Rod Fillet:
#1 2.7460-2.7470" (69.748-69.774 MM)
Main:
Main:
Thrust Width:
389604, 389605, 389607, 389608, 389609
Casting Numbers:
Comments:
SUPER 8, 2201, 2211, 2301,2202,2222,2302,2322,2332
PACKARD
5.2
320
Stroke: 5.000" (127. MM)

2.1870-2.1880" (55.55-55.575 MM)
Rods:
2.6245-2.6255" (66.662-66.688 MM)
Main:
Main:
Comments:
1937-39 SUPER 8
PACKARD
5.2
5.4
1.597
33-39
Cyl Bore:
Thrust Width:
3.1875" (80.963 MM)
@ #7
320
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
300102, 3144388, HAWK
Casting Numbers:
Comments:
5540 CLIPPER, DELUX, SUPER, SUPER PANAMA
PACKARD
3.500" (88.9 MM)

.125" (3.175 MM)
55
Cyl Bore:
Rod Fillet:
3.8125" (96.838 MM)

1/8
Thrust Width:
2.063
327
48-54
Stroke: 4.250" (107.95 MM)

Cyl Bore:
2.2497-2.2507" (57.142-57.168 MM)
Rods:
Rod Fillet:
#1 2.7460-2.7470" (69.748-69.774 MM)
Main:
Main:
Thrust Width:
419606, 419607, 419608, 419609, 421005, 421007
Casting Numbers:
Comments:
SUPER 8
404
3.500" (88.9 MM)

.125" (3.175 MM)
1.597
Engine Model

Make
Liter
CID
Vin
Model
PACKARD
PACKARD
5.8
352
PACKARD
5.8
356
55-56
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
2.063
Cyl Bore:
3.500" (88.9 MM)
PACKARD
5.9
PACKARD
6.1
6.3
40-50
54
Cyl Bore:
Rod Fillet:
3.5625" (90.488 MM)

1/8
Thrust Width:
1.597
Cyl Bore:
Rod Fillet:
4.125" (104.775 MM)

.125" (3.175 MM)
Thrust Width:
2.063
Cyl Bore:
3.5000" (88.9 MM)
374
51-56
384
Stroke: 5.000" (127. MM)

2.1870-2.1880" (55.55-55.575 MM)
Rods:
2.6245-2.6255" (66.662-66.688 MM)
Main:
Main:
Comments:
SUPER 8
31-36
Thrust Width:
PERKINS
PERKINS
25
102.04
0.5
28
102.04
2.5197-2.5204" (64.000-64.019 MM)
102.05
Stroke: 2.5197" (64.000 MM)

Cyl Bore:
1.3765-1.3770" (34.964-34.975 MM) *
Rods:
1.6915-1.6919" (42.964-42.975 MM) *
Main 1:
Main Fillet:
1.8096-1.8100" (45.964-45.975 MM) *
Main:
Main 2:
Comments:
100 SERIES DIESEL * .010 & .020" UNDERSIZE AVAILABLE
86-00
102.05
2.6378-2.6385" (67.000-67.019 MM)

.110-.125" (2.800-3.200 MM)
PERKINS
PERKINS
@ #7
2 Cylinders
0.4
Stroke: 2.5197" (64.000 MM)

Cyl Bore:
1.3765-1.3770" (34.964-34.975 MM)
Rods:
1 1.6915-1.6919" (42.964-42.975 MM)
Main 1:
2 1.8096-1.8100" (45.964-45.975 MM)
Main 2:
DIESEL, 100 SERIES, USED IN TORO LAWNMOWERS
Comments:
PERKINS
@ #5
359
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
300102, 3144388, HAWK
Casting Numbers:
PACKARD
Thrust Width:
Stroke: 4.500" (114.3 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.7460-2.7470" (69.748-69.774 MM)
Main:
Main:
419326, 419327
Casting Numbers:
Comments:
CARIBBEAN, PACIFIC, SEDAN LIMO
3 Cylinders
0.0
3.09
3.09
2.8340-2.8350" (71.984-72.009 MM)
Cyl Bore:
1.5340-1.5350" (38.964-38.989 MM)

1.8096-1.8100" (45.964-45.974 MM)
PERKINS
0.0
3.10
Cyl Bore:
Rods:
Main:
Main:
(cont.)
CLIPPER DELUX, CLIPPER CUSTOM, 400
Stroke: 4.625" (117.475 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
2.7460-2.7470" (69.748-69.774 MM)
Main:
Main:
362034
Casting Numbers:
Comments:
SUPER 8 "160", SUPER 8 "180"
Rods:
Main:
Main:
Engine Model
8 Cylinders
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.4985-2.4995" (63.462-63.487 MM)
Main:
Main:
300102, 3144388, 362043, HAWK
Casting Numbers:
Comments:
Year
1.5340-1.5350" (38.964-38.989 MM)

1.8096-1.8100" (45.964-45.974 MM)
405
3.10
2.9500-2.9540" (74.93-75.032 MM)

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
0.6
38
103.06
0.7
41
0.9
PERKINS
1.0
53
1.3
103.07
2.6378-2.6385" (67.000-67.019 MM)
.110-.125" (2.800-3.200 MM)
103.09
59
103.10
81
103.09
2.8300" (71.882 MM)
Cyl Bore:
Stroke: 2.8300" (71.882 MM)

Cyl Bore:
1.5340-1.5350" (38.964-38.989 MM) *
Rods:
1.8096-1.8100" (45.964-45.974 MM) *
Main:
Main Fillet:
Main:
Comments:
100 SERIES DIESEL, ALSO M30 * .010 & .020" UNDERSIZE AVAILABLE
PERKINS
103.06
103.07
Stroke: 2.5197" (64. MM)

1.5340-1.5350" (38.964-38.989 MM)
Rods:
1.8096-1.8100" (45.964-45.974 MM)
Main:
Main:
Comments:
100 SERIES DIESEL, ALSO M25
(cont.)
2.5197-2.5204" (64.000-64.018 MM)
Cyl Bore:
Stroke: 2.5197" (64.000 MM)

Cyl Bore:
1.3765-1.3770" (34.964-34.975 MM) *
Rods:
1.6915-1.6919" (42.964-42.975 MM) *
Main 1:
Main Fillet:
1.6915-1.6919" (42.964-42.975 MM) *
Main:
Main 2:
1.8096-1.8100" (45.964-45.975 MM) *
Main 3:
Comments:
100 SERIES DIESEL * .010 & .020" UNDERSIZE AVAILABLE
PERKINS
Engine Model
3 Cylinders
Stroke: 2.5200" (64.008 MM)

1.3765-1.3770" (34.963-34.976 MM)
Rods:
1 & 2 1.6915-1.6919" (42.964-42.974 MM)
Main 1:
3 1.8096-1.8100" (45.964-45.975 MM)
Main 2:
100 SERIES DIESEL, ALSO M20
Comments:
PERKINS
Year
98-00
103.10
2.9528-2.9535" (75.000-75.019 MM)

.110-.125" (2.800-3.200 MM)
103.13
103.13
3.3071-3.3078" (84.000-84.019 MM)

Stroke: 3.150" (80 MM)
Cyl Bore:
1.7309-1.7313" (43.964-43.975 MM)
Rods:
2.2818-2.2823" (57.957-57.970 MM)
.110-.125" (2.8- 3.2 MM)
Main:
Main Fillet:
Main:
Comments:
100 SERIES DIESEL THRUST WASHER THICKNESS .1161-.1181" (2.950-3.000 MM)
PERKINS
1.5
91
103.15
99-00
103.15
3.3071-3.3078" (84.000-84.019 MM)

Stroke: 3.5433" (90.000 MM)
Cyl Bore:
2.0458-2.0463" (51.964-51.975 MM) *
Rods:
ALL 2.6755-2.6760" (67.957-67.970 MM) *
.110-.125" (2.800-3.200 MM)
Main:
Main Fillet:
Main:
Comments:
100 SERIES DIESEL * .010 & .020" UNDERSIZE AVAILABLE, THRUST WASHER THICKNESS STD
.1161-.1181" (2.950-3.000 MM)
PERKINS
2.4
144
144
Stroke: 5.000" (127. MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
P3.144 DIESEL
PERKINS
Stroke:
Rods:
2.5
144
Cyl Bore:
3.5010-3.5020" (88.925-88.951 MM)
Thrust Width:
1.8427-1.8457 @#4 LIP TYPE SEAL, 1.883-
152
152
5.0000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457 *
2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
3.152 DIESEL, CAST IRON LINERS, INDIRECT INJ * THRUST @ #4, ROPE SEAL WIDTH=1.8742-1.8772
THRUST WASHER THKNS .121-.123 STD
PERKINS
Stroke:
Rods:
2.5
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457 *
2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
3.152 DIESEL, CHROMIUM LINERS, INDIRECT INJ * THRUST @ #4, ROPE SEAL WIDTH=1.8742-1.8772
406

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
Stroke:
Rods:
3 Cylinders
2.5
152
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457*
D3.152 DIESEL,CHROMIUM LNR,ALLIS 160 TRCTR,DIR INJ * THRUST @ #4, ROPE SEAL
WIDTH=1.8742-1.8772 THRUST WASHER THICKNESS .121-.123" STD
PERKINS
Stroke:
Rods:
2.5
152
D(2)
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457*
#1 2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
467, SD260034
Casting Numbers:
Comments:
D3.152 DIESEL, CAST IRON LINER, DIR INJ * THRUST @ #4, ROPE SEAL WIDTH=1.8742-1.8772
WASHER THKNS=.121-.123 STD
PERKINS
Stroke:
Rods:
2.5
152
D(3)
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
PERKINS
2.5
152
D(4)
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
THRUST
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457*
#1 2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
467, SD260034
Casting Numbers:
Comments:
3.1522 DIESEL, CAST IRON LINER, DIR INJ * THRUST @ #4, ROPE SEAL WIDTH=1.8742-1.8772
WASHER THKNS .121-.123 STD
Stroke:
Rods:
(cont.)
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
31312700, 467, SD260034
Casting Numbers:
Comments:
Engine Model
Year
THRUST
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457 *
#1 2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
3.1522 DIESEL, CHROMIUM LINERS, DIR INJ * THRUST @ #4, ROPE SEAL WIDTH=1.8742-1.8772
PERKINS
Stroke:
Rods:
2.5
152
D(5)
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.600" (91.44 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.104
1.8427-1.8457 *
2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
T3.1524 DIESEL, TURBO, CAST IRON LINERS, DIR INJ * THRUST @ #4, ROPE SEAL WIDTH=1.8742-1.8772
THRUST WASHER THKNS=.121-.123 STD
PERKINS
Stroke:
Rods:
2.5
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
D(6)
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.104
1.8427-1.8457 @ #4
2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
T3.1524 DIESEL, TURBO, CHROMIUM LINERS, DIR INJ ROPE SEAL WIDTH=1.8742-1.8772
WASHER THKNS=.121-.123 STD
407
THRUST

Make
Liter
CID
Vin
Model
Year
PERKINS
PERKINS
Stroke:
Rods:
3 Cylinders
2.5
152
D(7)
5.0000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
PERKINS
2.5
152
D(8)
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457" @ #4 *
PERKINS
2.5
152
5.000" (127. MM)

2.2484-2.2492" (57.109-57.13 MM)
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.565" (39.675-39.751 MM)
.094-.109
1.8427-1.8457 @ #4 *
PERKINS
2.7
164
PERKINS
2.7
3.937" (100. MM)
Rod Width:
1.5748-1.5810" (40.-40.157 MM)
Thrust Width:
1.8504-1.8535
165
900 SERIES
5.000" (127.000 MM)

2.2484-2.2492" (57.110-27.130 MM)
PERKINS
3.3
201
900 SERIES
3.7406-3.7416" (95.012-95.037 MM)

.156-.172" (3.960-4.370 MM)
1.562-1.565" (39.670-39.750 MM)
.094-.109" (2.390-2.770 MM)
1.8427-1.8457" @ #4
311
4.724" (119.99 MM)

2.6764-2.6772" (67.981-68.001 MM)
3.3459-3.3472" (84.986-85.019 MM)

Main:
Main:
Comments:
VALMET D SERIES, 311D/DS
311
Cyl Bore:
4.252" (108.001 MM)
Rod Width:
1.5748-1.5810" (40.-40.157 MM)
Thrust Width:
1.7716-1.7747
PERKINS
PERKINS
309
Cyl Bore:
Cyl Bore:
Rod Fillet:
Rod Width:
2.7485-2.7493" (69.812-69.832 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL,TURBO, NATURALLY ASPRTD, DIR INJ, 4-STROKE
Stroke:
Rods:
152
3.6015-3.6025" (91.478-91.504 MM)
.156-.172" (3.962-4.369 MM)
1.562-1.570" (39.675-39.878 MM)
.094-.109
1.8427-1.8457
309
4.488" (113.995 MM)

2.4402-2.4409" (61.981-61.999 MM)
2.7554-2.7566" (69.987-70.018 MM)

Main:
Main:
Comments:
VALMET D SERIES, 309 D/DS
Stroke:
Rods:
THRUST WASHER
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
1 2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243 MIN" (133.172 MM)
Rear Seal Diameter:
Comments:
AG3.152 GAS, USED BY MASSEY FERGUSON 150 LIP SEAL IN REAR
Stroke:
Rods:
THRUST WASHER
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
Comments:
3.1524 DIESEL, CHROMIUM LINER, DIR INJ * ROPE SEAL WIDTH=1.8742-1.8772
THKNS .121-.123 STD
Stroke:
Rods:
(cont.)
152
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.7485-2.7493" (69.812-69.832 MM)

Main:
Main:
Balance: Internal
5.243" MIN (133.172 MM)
Rear Seal Diameter:
3.1524 DIESEL, CAST IRON LINER, DIR INJ * ROPE SEAL WIDTH=1.8742-1.8772
Comments:
THKNS .121-.123 STD
Stroke:
Rods:
Engine Model
4 Cylinders
1.6
Stroke: 3.465" (88.011 MM)

1.9995-2.0000" (50.787-50.8 MM)
Rods:
1 & 2 2.2480-2.2485" (57.099-57.112 MM)
Main 1:
3 2.2475-2.2480" (57.087-57.099 MM)
Main 2:
4.99 DIESEL
Comments:
99
.99
Cyl Bore:
408
.99
3.000-3.001" (76.2-76.225 MM)

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
4 Cylinders
1.8
107
Stroke: 3.465" (88.011 MM)

1.9995-2.0000" (50.787-50.8 MM)
Rods:
1 & 2 2.2480-2.2485" (57.099-57.112 MM)
Main 1:
3 2.2475-2.2480" (57.087-57.099 MM)
Main 2:
22922Z9 JCSB
Casting Numbers:
Comments:
Engine Model
(cont.)
107
107
3.1250-3.1260" (79.375-79.4 MM)
Cyl Bore:
4.107 DIESEL, MASSEY FERGUSON 130
PERKINS
1.8
107
Stroke: 3.500" (88.9 MM)

1.9993-2.0001" (50.782-50.803 MM)
Rods:
1 & 2 2.2480-2.2485" (57.099-57.112 MM)
Main 1:
3 2.2475-2.2480" (57.087-57.099 MM)
Main:
Main 2:
Balance: Internal
3.9985-3.9995" (101.562-101.587 MM)
Rear Seal Diameter:
Comments:
4.108 DIESEL
PERKINS
Stroke:
Rods:
Year
2.0
108
121
108
3.1250-3.1260" (79.375-79.4 MM)
.156-.172" (3.962-4.369 MM)
.121-.141
Cyl Bore:
Rod Fillet:
Main Fillet:
PRIMA
3.5000" (88.9 MM)

2.1256-2.1264" (53.99-54.011 MM)
PRIMA
3.3267" (84.498 MM)
Cyl Bore:
1.0810-1.0819" (27.457-27.48 MM)

Rod Width:
2.2437-2.2445" (56.99-57.01 MM)
Main:
1.724-1.727
Main:
Thrust Width:
1.3766-1.3778" (34.966-34.996 MM)
Comments:
500, 504,M50,M60,M80T,5000 SERIES DIESEL ALUM HEAD THRUST WASHER THKNS=.091-.093, .012
UNDERSIZE BRGSAVLBL, REAR FLANGE DIAM=3.498-3.502
PERKINS
2.0
122
104.19
104.19
3.3071-3.3078" (84.000-84.019 MM)

Stroke: 3.5433" (90.000 MM)
Cyl Bore:
2.0458-2.0463" (51.964-51.975 MM)
Rods:
ALL 2.6755-2.6760" (67.957-67.970 MM)
.110-.125" (2.800-3.200 MM)
Main:
Main Fillet:
Main:
Comments:
100 SERIES DIESEL, GEHL SKIDSTER THRUST WASHER STD THKNS .1161-.1181" (2.950-3.000 MM)
PERKINS
2.2
135
104.22
104.22
3.3071-3.3078" (84.000-84.019 MM)

Stroke: 3.9370" (100.000 MM)
Cyl Bore:
2.0458-2.0463" (51.964-51.975 MM) *
Rods:
ALL 2.6755-2.6760" (67.957-67.970 MM) *
.110-.125" (2.800-3.200 MM)
Main:
Main Fillet:
Main:
Comments:
100 SERIES DIESEL * .010 & .020" UNDERSIZE AVAILABLE, THRUST WASHER STD THICKNESS
.1161-.1181" (2.950-3.000 MM)
PERKINS
Stroke:
Rods:
2.5
154
154
4.000" (101.6 MM)

2.2485-2.2491" (57.112-57.127 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
2.7485-2.7491" (69.812-69.827 MM)
Main:
Main Fillet:
Main:
Thrust Width:
31315961, 31315962, 31315963, 31316351, 31316353, 31318352
Casting Numbers:
Comments:
4.154, 200 SERIES, YALE FORK LIFTS, MAZDA XA * 1.437" REPORTED
PERKINS
Stroke:
Rods:
2.5
154
4.000" (101.6 MM)

2.2485-2.2491" (57.112-57.127 MM)
2.7482-2.7491" (69.804-69.827 MM)

Main:
Main:
2.211-2.212" (56.159-56.185 MM)
3.9985-3.9995" (101.562-101.587 MM)
Rear Seal Diameter:
Comments:
4.154.2 DIESEL, 204.25(XA) SERIES, INDIRECT INJ
PERKINS
Stroke:
Rods:
2.6
154.2
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
159
704
3.937" (100.000 MM)

2.0846-2.0854" (52.950-52.970 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
2.5570-2.5578" (64.951-64.970 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL, UB ENGINE, 700 SERIES, INDIRECT INJECTION
409
154
3.5010-3.5020" (88.925-88.951 MM)
.126-.142" (3.2-3.607 MM)
1.3806" (35.067 MM)
.146-.157
1.4545*
154.2
3.501-3.502" (88.925-88.951 MM)
.125-.140" (3.175-3.556 MM)
1.3725-1.3741" (34.862-34.902 MM)
.140-.156
@ #3
700 SERIES
3.5827-3.5837" (91.000-91.025 MM)
.130-.140" (3.300-3.700 MM)
1.1830-1.2970" (30.050-32.950 MM)
.130-.140" (3.300-3.700 MM)
1.2992-1.3008" (33.000-33.040 MM) @ #4

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
4 Cylinders
3.0
182
182
Stroke: 4.134" (105.004 MM)

Cyl Bore:
2.4060-2.4065" (61.112-61.125 MM)
Rods:
2.9844-2.9852" (75.804-75.824 MM)
Main:
Main:
4.182,204.30 SERIES (HA),DIESEL,INDIRECT INJ,MAZDA
Comments:
PERKINS
Stroke:
Rods:
3.0
183
3.0
183
2.5571-2.5578" (64.951-64.970 MM)

Main:
Main:
Comments:
DIESEL, UA ENGINE, 700 SERIES, DIRECT INJECTION
PERKINS
Stroke:
Rods:
3.2
192
700 SERIES
700 SERIES
3.8189-3.8199" (97.000-97.025 MM)
.130-.140" (3.300-3.700 MM)
1.1830-1.2970" (30.050-32.950 MM)
.130-.140" (3.300-3.700 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
5.0000" (127. MM)

2.2485-2.2490" (57.112-57.125 MM)
182
3.8189-3.8199" (97.000-97.025 MM)

.130-.140" (3.300-3.700 MM)
1.1830-1.2970" (30.050-32.950 MM)
.130-.140" (3.300-3.70 MM)
1.2992-1.3008" (33.000-33.040 MM) @ #4
704
3.937" (100.000 MM)

2.0846-2.0854" (52.950-52.970 MM)
(cont.)
94-99
704
3.937" (100.000 MM)

2.0846-2.0854" (52.950-52.970 MM)
PERKINS
Engine Model
3.740" (94.996 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
2.5571-2.5578" (64.951-64.970 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
TURBO DIESEL, UC ENGINE, 700 SERIES, DIRECT INJ.
Stroke:
Rods:
Year
192
192
3.5000" (88.9 MM)
.219" (5.563 MM)
1.562-1.565" (39.670-39.750 mm)
Cyl Bore:
Rod Fillet:
Rod Width:
ALL 2.7485-2.7490" (69.812-69.825 MM)

Main:
1.892" ROPE SEAL 1.861" LIP TYPE SEAL
Main:
Thrust Width:
31315127
Casting Numbers:
Comments:
4.192 DIESEL THRUST WASHER THICKNESS: .121-.123" STD - .1285-.1305" O/S
PERKINS
Stroke:
Rods:
3.3
203
5.000" (127. MM)

2.2480-2.2490" (57.099-57.125 MM)
203
Rod Width:
2.7480-2.7490" (69.799-69.825 MM)
Main:
Main:
Thrust Width:
31315135
Casting Numbers:
Comments:
4.203 DIESEL, DIRECT & INDIRECT INJ. 165 MASSEY
PERKINS
3.3
203
Stroke: 5.000" (127. MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
Comments:
4.203 GAS
PERKINS
3.5
PERKINS
3.5
212
1.8607"LiP SEAL 1.8922" ROPE SEAL
203
3.6015-3.6025" (91.478-91.504 MM)
212
4.500" (114.3 MM)

2.4988-2.4996" (63.47-63.49 MM)
212
3.8780-3.8790" (98.501-98.527 MM)
Cyl Bore:
212
1.5650" (39.751 MM)
203
Cyl Bore:
Stroke: 4.500" (114.3 MM)

2.4990-2.4995" (63.475-63.487 MM)
Rods:
2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
17552TJCSB
Casting Numbers:
Comments:
GAS, MF165 MASSEY FERGUSON
Stroke:
Rods:
203
3.6015-3.6025" (91.478-91.504 MM)
Cyl Bore:
212
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
212
3.875" (98.425 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156
1.738-1.741 @#3
2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125ROPE" (79.35-79.375 MM)
Rear Seal Diameter:
Comments:
4.212 DIESEL, FLANGELESS CAST IRON LINER, DIR INJ FLANGE DIAMETER: 5.247-5.249
PERKINS
Stroke:
Rods:
3.5
4.500" (114.3 MM)

2.4988-2.4996" (63.47-63.49 MM)
212
D(2)
212
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
212
3.875" (98.425 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156
1.738-1.741 @#3
2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125ROPE" (79.35-79.375 MM)
Rear Seal Diameter:
Comments:
4.212 DIESEL, FLANGED CAST IRON LINER, DIR INJ FLANGE DIAMETER: 5.247-5.249
410

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
Stroke:
Rods:
4 Cylinders
3.9
236
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
(cont.)
236
3.8780-3.8790" (98.501-98.527 MM)

.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156" (3.683-3.962 MM)
1.740 @ #3
A4.236 DIESEL, MASSEY 175 & 180
PERKINS
Stroke:
Rods:
Engine Model
236
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124" FOR ROPE (79.35 MM)
Rear Seal Diameter:
31315870, 31315881, 31315980
Casting Numbers:
Comments:
Year
3.9
236
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
236
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
236
3.8780-3.8790" (98.501-98.527 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156
1.738-1.741 @#3
#1 2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125" ROPE (79.35-79.375 MM)
Rear Seal Diameter:
31315870, 31315881, 31315980, 3131599F
Casting Numbers:
Comments:
4.236 DIESEL, FLANGELESS CAST IRON LINER, DIR INJ FLANGE DIAMETER: 5.247-5.249
PERKINS
Stroke:
Rods:
3.9
236
D(1)
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
#1 2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125" ROPE (79.35-79.375 MM)
Rear Seal Diameter:
31315870, 31315881, 31315980
Casting Numbers:
Comments:
4.236 TURBO DIESEL FLANGE DIAMETER: 5.247-5.249
PERKINS
Stroke:
Rods:
3.9
236
236
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
D(2)
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
236
3.8775" (98.489 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#3
236
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
236
3.8780-3.8790" (98.501-98.527 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#3
2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125" (79.35-79.375 MM) ROPE SEAL
Rear Seal Diameter:
Comments:
4.236 DIESEL, FLANGED CAST IRON LINER, DIR INJ FLANGE DIAMETER: 5.247-5.249
PERKINS
Stroke:
Rods:
3.9
236
D(3)
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
236
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
236
3.8765-3.8790" (98.463-98.527 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#3
2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125" (79.35-79.375 MM) ROPE SEAL
Rear Seal Diameter:
Comments:
4.236 DIESEL, CHROME LINER-THIN WALL, DIR INJ FLANGE DIAMETER: 5.247-5.249
PERKINS
Stroke:
Rods:
3.9
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
236
D(4)
236
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
236
3.8780-3.8790" (98.501-98.527 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#3
2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125" (79.35-79.375 MM) ROPE SEAL
Rear Seal Diameter:
Comments:
4.236 DIESEL, CHROME LINER-THICK WALL, DIR INJ FLANGE DIAMETER: 5.247-5.249
411

Make
Liter
CID
Vin
Model
Year
PERKINS
PERKINS
4 Cylinders
3.9
236
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.0
243
1000
5.000" (127. MM)

2.4990-2.5000" (63.475-63.5 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
5.247-5.251" (133.274-133.375 MM)
Rear Seal Diameter:
3131599
Casting Numbers:
Comments:
DIESEL, PHASER ENGINE THRUST WASHER THKNS .089-.091
PERKINS
Stroke:
Rods:
236
3.8770-3.8780" (98.476-98.501 MM)
.145-.156" (3.683-3.962 MM)
.145-.156
1.545-1.549 @#5
GAS, FORKLIFT, LATE MASSEY FERGUSON 180 TRACTOR THRUST LENGTH 1.743
PERKINS
Stroke:
Rods:
(cont.)
236
Stroke: 5.000" (127. MM)

2.4990-2.4995" (63.475-63.487 MM)
Rods:
2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
3.1240-3.1250" (79.35-79.375 MM)
Rear Seal Diameter:
31315870, 31315881, 31315980
Casting Numbers:
Comments:
Engine Model
4.0
243
TURBO
5.000" (127. MM)

2.4990-2.5000" (63.475-63.5 MM)
88-96
1000
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
1000
3.9375-3.9385" (100.013-100.038 MM)

.145-.156" (3.683-3.962 MM)
1.589-1.591" (40.361-40.411 MM)
.145-.156
1.738-1.741 @#2
88-96
1000
3.9375-3.9385" (100.013-100.038 MM)

.145-.156" (3.683-3.962 MM)
1.589-1.591" (40.361-40.411 MM)
.145-.156
1.738-1.741 @#2
2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
5.247-5.251" (133.274-133.375 MM)
Rear Seal Diameter:
Comments:
DIESEL, TURBO, PHASER ENGINE THRUST WASHER THKNS .089-.091 STD
PERKINS
Stroke:
Rods:
4.0
243
243
5.000" (127. MM)

2.4990-2.500" (63.475-63.5 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
Comments:
1000 SERIES, AA, AB, AC, AD, AE, AG, AH
PERKINS
4.1
248
248
Stroke: 5.000" (127. MM)

Cyl Bore:
2.4988-2.4996" (63.47-63.49 MM)
Rods:
Rod Fillet:
#1 2.9984-2.9992" (76.159-76.18 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Balance: Internal
3.124-3.125ROPE" (79.35-79.375 MM)
Rear Seal Diameter:
31315870, 31315881, 31315980
Casting Numbers:
Comments:
4.248 DIESEL, 4 STROKE, DIR INJ FLANGE DIAMETER: 5.247-5.249
PERKINS
Stroke:
Rods:
4.1
248
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
D(2)
PERKINS
4.1
5.0000" (127. MM)

2.4990-2.5000" (63.475-63.5 MM)
248
3.9785-3.9795" (101.054-101.079 MM)
5/32(.145-.156)" (3.962 MM)
5/32(.145-.156)
1.738-1.741 @#3
248
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
#1 2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124-3.125" ROPE (79.35-79.375 MM)
Rear Seal Diameter:
31315870, 31315881, 31315980
Casting Numbers:
Comments:
4.2482 DIESEL, 4 STROKE, DIR INJ FLANGE DIAMETER: 5.247-5.249
Stroke:
Rods:
243
3.937" (100. MM)
.145-.156" (3.683-3.962 MM)
1.5890-1.5910" (40.361-40.411 MM)
.145-.156
1.738-1.741
248
248
3.9785-3.9795" (101.054-101.079 MM)
5/32 (.145-.156") (3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
5/32 (.145-.156") (3.962 MM)
1.738-1.741 @#3
4.41
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
5.247-5.251" (133.274-133.375 MM)
Rear Seal Diameter:
Comments:
DIESEL,4 STROKE,NATL ASP,DIR INJ,& MASSEY FERGUSON
412
4.41
3.9800" (101.092 MM)
.145-.156" (3.683-3.962 MM)
1.5890-1.5910" (40.361-40.411 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#3

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
Stroke:
Rods:
4 Cylinders
4.4
268
3.3459-3.3472" (84.986-85.019 MM)

Main:
Main:
VALMET D SERIES, 411D
Comments:
4.4
270
5.0
5.2
411
4.252" (108.001 MM)
Rod Width:
1.5748-1.5810" (40.-40.157 MM)
Thrust Width:
1.7716-1.7747
270
270
4.250" (107.95 MM)
Cyl Bore:
302
Stroke: 4.750" (120.65 MM)

2.7485-2.7490" (69.812-69.825 MM)
Rods:
2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
Comments:
MASSEY FERGUSON, SUPER 90 (A4.300)
PERKINS
(cont.)
Cyl Bore:
Stroke: 4.750" (120.65 MM)

2.7482-2.7490" (69.804-69.825 MM)
Rods:
2.9980-2.9985" (76.149-76.162 MM)
Main:
Main:
Comments:
4.270 DIESEL THRUST WASHER THKNS .091-.093
PERKINS
Engine Model
411
4.724" (119.99 MM)

2.6764-2.6772" (67.981-68.001 MM)
PERKINS
Year
302
318
302
4.5015-4.5025" (114.338-114.364 MM)
Cyl Bore:
318
318
4.5025-4.5035" (114.364-114.389 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.7483-2.7490" (69.807-69.825 MM)
.188-.203" (4.775-5.156 MM)
Rods:
Rod Fillet:
2.9985-2.9990" (76.162-76.175 MM)
.145-.160
Main:
Main Fillet:
2.103-2.104" @ #3 * SEE COMMENTS
Main:
Thrust Width:
Balance: Internal
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31315841, 31315843, 31315952, 31315971, 31316323, 31316324, 31316325
Casting Numbers:
Comments:
285, 1080, 1085 MASSEY FERGUSON 4.318 DIESEL * 2.122" MAX USING THE PERKINS +.007" THRUST
WASHER SET
PERKINS
PERKINS
6 Cylinders
0.0
Stroke: 5.000" (127. MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
P6, SERIES 6.288, 6.305, 6.306
Comments:
PERKINS
5.0
305
Stroke: 5.000" (127. MM)

2.2485-2.2490" (57.112-57.125 MM)
Rods:
2.7485-2.7490" (69.812-69.825 MM)
Main:
Main:
31323253, 31325123
Casting Numbers:
Comments:
6.305 SERIES
PERKINS
5.8
5.8
305
305
3.583" (91.008 MM)
Thrust Width:
1.8913 MAX @ #7
354
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
354
Stroke: 5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
Rods:
2.9984-2.9996" (76.159-76.19 MM)
Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
6.3541, TURBO, 1105 & 1135 MASSEY FERGUSON
288
3.877" (98.476 MM)
Cyl Bore:
354
Stroke: 5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
Rods:
2.9984-2.9996" (76.159-76.19 MM)
Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
6.354, 2-105 WHITE, NON-TURBO
PERKINS
288
Cyl Bore:
354
3.877-3.878" (98.476-98.501 MM)
.145-.156" (3.683-3.962 MM)
.145-.156" (3.683-3.962 MM)
1.759 MAX. @ #4
354.1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
413
354.1
3.877-3.878" (98.476-98.501 MM)
.145-.156" (3.683-3.962 MM)
.145-.156" (3.683-3.962 MM)
1.759 MAX @ #4

Make
Liter
CID
Vin
Model
PERKINS
PERKINS
Year
6 Cylinders
5.8
354
Engine Model
(cont.)
354.2
354.2
3.877-3.878" (98.476-98.501 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.4988-2.4996" (63.47-63.49 MM)
.145-.156" (3.683-3.962 MM)
Rods:
Rod Fillet:
2.9984-2.9996" (76.159-76.19 MM)
.145-.156" (3.683-3.962 MM)
Main:
Main Fillet:
1.759 MAX @ #4
Main:
Thrust Width:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322317, 31322321, 31322322, 31322351, 31322421, 31323202, 31323207, 31323251, 31325016,
Casting Numbers:
31325019, 31325022, 31325023, 31325025, 31325028, 31325036, 31325042
6.3542, TURBO
Comments:
PERKINS
Stroke:
Rods:
5.8
354
3543
5.000" (127. MM)

2.4988-2.9996" (63.47-76.19 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3543
3.8770-3.8780" (98.476-98.501 MM)
.145-.156" (3.683-3.962 MM)
1.589-1.582" (40.361-40.183 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#4
2.9984-2.9996" (76.159-76.19 MM)

Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
T6.3543, TURBO,THERE IS A SERIAL # BREAK @ 10342TL MAX THRUST LENGTH OF 1.7590
PERKINS
Stroke:
Rods:
5.8
354
3544
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
2.9984-2.9996" (76.159-76.19 MM)

Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
T6.3544, TURBO MAX THRUST LENGTH OF 1.7590
PERKINS
Stroke:
Rods:
5.8
354
5.000" (127. MM)

2.4988-2.9996" (63.47-76.19 MM)
2.9984-2.9996" (76.159-76.19 MM)

Main:
Main:
5.248-5.250" (133.299-133.35 MM)
Rear Seal Diameter:
31322302, 31323301
Casting Numbers:
Comments:
6.3544, NON-TURBO MAX THRUST LENGTH OF 1.7590
PERKINS
Stroke:
Rods:
6.0
372
PERKINS
6.1
372
2.9984-2.9992" (76.159-76.18 MM)

Main:
Main:
Balance: Internal
3.124 FOR ROPE" (79.35 MM)
Rear Seal Diameter:
Comments:
6.372 DIESEL
372
3.8580" (97.993 MM)
Cyl Bore:
5.000" (127. MM)

2.4988-2.4996" (63.47-63.49 MM)
365
3.937" (100. MM)
.145-.156" (3.683-3.962 MM)
1.5890-1.5910" (40.361-40.411 MM)
.145-.156
1.738-1.741
372
Stroke: 5.276" (134.01 MM)

2.4990-2.4995" (63.475-63.487 MM)
Rods:
2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
Comments:
6.372, MASSEY FERGUSON
Stroke:
Rods:
3544
3.8770-3.8780" (98.476-98.501 MM)
.145-.156" (3.683-3.962 MM)
1.589-1.592" (40.361-40.437 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#4
365
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.9980-2.9990" (76.149-76.175 MM)

Main:
Main:
Comments:
1000 SERIES, YA, YB, YC, YD, YE
6.1
3544
3.8770-3.8780" (98.476-98.501 MM)
.145-.156" (3.683-3.962 MM)
1.589-1.592" (40.361-40.437 MM)
.145-.156" (3.683-3.962 MM)
1.738-1.741 @#4
3544
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
365
5.000" (127. MM)

2.4990-2.500" (63.475-63.5 MM)
PERKINS
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
372
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
414
372
3.8750" (98.425 MM)
.145-.156" (3.683-3.962 MM)
1.5885-1.5915" (40.348-40.424 MM)
.145-.156
1.740 @ #3

Make
Liter
CID
Vin
Model
Year
PERKINS
PERKINS
Stroke:
Rods:
6 Cylinders
6.6
402
PERKINS
7.4
(cont.)
611
4.724" (119.99 MM)

2.6764-2.6772" (67.981-68.001 MM)
3.3459-3.3472" (84.986-85.019 MM)

Main:
Main:
VALMET D SERIES, 611DS/DSB
Comments:
Stroke:
Rods:
Engine Model
611
Cyl Bore:
4.252" (108.001 MM)
Rod Width:
1.5748-1.5810" (40.-40.157 MM)
Thrust Width:
1.7716-1.7747
450
612
5.275" (133.985 MM)

2.8733-2.8740" (72.982-73. MM)
612
Cyl Bore:
4.252" (108.001 MM)
Rod Width:
1.5784-1.5810" (40.091-40.157 MM)
3.3458-3.3472" (84.983-85.019 MM)

Main:
Main:
Comments:
VALMET D SERIES, 612DS
PERKINS
12.2
743
2000 SERIES
Stroke: 6.000" (152.400 MM)

Cyl Bore:
3.2494-3.2495" (82.535-82.537 MM)
Rods:
3.8995-3.9005" (99.047-99.073 MM)
Main:
Main:
Thrust Width:
4.248-4.249" (107.899-107.925 MM)
Rear Seal Diameter:
Comments:
TURBO DIESEL,TG1 & 1A,TG2 & 2A,TAG&G2,TWG&G2,TTAG
PERKINS
PERKINS
2000 SERIES
5.125-5.126" (130.175-130.200 MM)
3.162-3.168" (80.315-80.467 MM)
8 Cylinders
8.3
504
504
504
3.2480-3.2485" (82.499-82.512 MM)

Rods:
3.9967-3.9972" (101.516-101.529 MM)
Main:
Main:
DIESEL
Comments:
PERKINS
Stroke:
Rods:
8.4
510
510
4.500" (114.3 MM)

3.2480-3.2485" (82.499-82.512 MM)
3.9967-3.9972" (101.516-101.529 MM)

Main:
Main:
Balance: Internal
3.374-3.375" (85.7-85.725 MM)
Rear Seal Diameter:
41111664
Casting Numbers:
Comments:
8.510 STD THRUST WASHER THKNS .122-.125
PERKINS
Stroke:
Rods:
8.9
540
PERKINS
8.9
540
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
TURBO
4.764" (121.006 MM)

2.9980-2.9985" (76.149-76.162 MM)
3.9967-3.9972" (101.516-101.529 MM)

Main:
Main:
3.375-3.375" (85.725-85.725 MM)
Rear Seal Diameter:
41111638
Casting Numbers:
Comments:
TURBO DIESEL, TV8.540
PERKINS
Stroke:
Rods:
10.5
510
4.250-4.251" (107.95-107.975 MM)
.125-.140" (3.175-3.556 MM)
2.905-2.908" (73.787-73.863 MM)
.125-.140" (3.175-3.556 MM)
1.655-1.658 @ #3
540
4.764" (121.006 MM)

2.9980-2.9985" (76.149-76.162 MM)
3.9967-3.9972" (101.516-101.529 MM)

Main:
Main:
3.374-3.375" (85.7-85.725 MM)
Rear Seal Diameter:
Comments:
DIESEL, V8.540
Stroke:
Rods:
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
540
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
640
4.752" (120.701 MM)

2.9980-2.9985" (76.149-76.162 MM)
3.9967-3.9972" (101.516-101.529 MM)

Main:
Main:
Comments:
V8.640 & TV8.640 THRUST WASHER THKNS .122-.125
540
4.251" (107.975 MM)
.125-.140" (3.175-3.556 MM)
2.905-2.908" (73.787-73.863 MM)
.125-.140" (3.175-3.556 MM)
.122-.125 @ #3
540
4.250-4.251" (107.95-107.975 MM)
.125-.140" (3.175-3.556 MM)
2.905-2.908" (73.787-73.863 MM)
.125-.140" (3.175-3.556 MM)
.122-.125 @ #3
640
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
415
640
4.630" (117.602 MM)
.188-.203" (4.775-5.156 MM)
3.030-3.033" (76.962-77.038 MM)
.125-.140
1.720-1.724 @#3

Make
Liter
CID
Vin
Model
PEUGEOT
PEUGEOT
0.0
TUD5
3.0315" (77.000 MM)
Thrust Width:
@ #2
4 Cylinders
1.6
97
Stroke: 3.171" (80.543 MM)

1.6122-1.6128" (40.95-40.965 MM)
Rods:
2.0459-2.0463" (51.966-51.976 MM)
Main:
Main:
OMNI, OHV, ALSO USED IN CHRYSLER * WASHERS
Comments:
1.9
1.9
1.9
Thrust Width:
116
Cyl Bore:
3.268" (83.007 MM)
Thrust Width:
1.0472
Cyl Bore:
3.268" (83.007 MM)
Thrust Width:
1.0472
DOHC
88-91
116
XUD9
Stroke: 3.465" (88.000 MM)

Cyl Bore:
1.9684-1.9690" (49.984-50.000 MM)
Rods:
2.3613-2.3620" (59.981-60.000 MM)
Main:
3.540-3.543" (89.913-90.000 MM)
Main:
Rear Seal Diameter:
Comments:
DIESEL, MELROE BOBCAT 751 BICS, LIQUID COOLED
PEUGEOT
2.0
@ #3 *
88-91
Stroke: 3.465" (88.011 MM)

1.9679-1.9685" (49.985-50. MM)
Rods:
2.3615-2.3622" (59.982-60. MM)
Main:
Main:
Balance: Internal
3.5433" (90. MM)
Rear Seal Diameter:
Comments:
DOHC, 405S O.S. T/W AVLBLE
PEUGEOT
83-86
3.173" (80.594 MM)
Cyl Bore:
116
Stroke: 3.465" (88.011 MM)

1.9679-1.9685" (49.985-50. MM)
Rods:
2.3615-2.3622" (59.982-60. MM)
Main:
Main:
Balance: Internal
3.5433" (90. MM)
Rear Seal Diameter:
Comments:
SOHC, 405S O.S. T/W AVLBLE
PEUGEOT
TUD5
Cyl Bore:
PEUGEOT
PEUGEOT
Engine Model
3 Cylinders
1.7707-1.7713" (44.975-44.991 MM)

Rods:
1.9671-1.9678" (49.965-49.981 MM)
Main:
Main:
3.3439-3.3464" (84.935-85.000 MM)
Rear Seal Diameter:
DIESEL
Comments:
PEUGEOT
Year
119
95-96
XUD9
3.2673-3.2687" (82.982-83.018 MM)
XD88
XD88
3.4646" (88.001 MM)

Stroke: 3.1496" (80. MM)
Cyl Bore:
1.9679-1.9689" (49.985-50.01 MM)
Rods:
2.1651-2.1662" (54.994-55.021 MM)
Main:
1.487-1.489 @#3
Main:
Thrust Width:
Comments:
MARINE DIESEL, XDP4.88 2 THKNS THRUST WASHER AVLBL: .090-.092 & .098-.099
PEUGEOT
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
2.0
120
XN
3.189" (81.001 MM)

1.9675-1.9681" (49.975-49.99 MM)
1 2.3386-2.3392" (59.400-59.416 MM)
2 2.3050-2.3060" (58.547-58.572 MM)
3 2.2509-2.2515" (57.173-57.188 MM)
4 2.2102-2.2112" (56.139-56.164 MM)
5 2.1616-2.1622" (54.905-54.92 MM)
Comments:
71-79
Cyl Bore:
3.464" (87.986 MM)
Thrust Width:
REAR
Cyl Bore:
3.465" (88.011 MM)
Thrust Width:
REAR
XN1P, OHV, GAS, 504
PEUGEOT
2.0
Stroke: 3.189" (81.001 MM)

2.1123-2.1131" (53.652-53.673 MM)
Rods:
#1 2.1616-2.1646" (54.905-54.981 MM)
Main:
Main:
Comments:
OHV, GAS, 505
120
XN6
80-87
416
XN1P

Make
Liter
CID
Vin
Model
PEUGEOT
PEUGEOT
2.2
132
ZDJL
2.2
85-86
Cyl Bore:
3.465" (88.011 MM)
Cyl Bore:
3.610" (91.694 MM)
132
85-90
3.210" (81.534 MM)

2.1123-2.1131" (53.652-53.673 MM)
#1 2.1616-2.1646" (54.905-54.981 MM)
#2 2.2102-2.2112" (56.139-56.164 MM)
#3 2.2509-2.2515" (57.173-57.188 MM)
#4 2.3050-2.3060" (58.547-58.572 MM)
#5 2.3386-2.3392" (59.4-59.416 MM)
Comments:
(cont.)
505 NON/TURBO GAS
PEUGEOT
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Engine Model
4 Cylinders
Stroke: 3.500" (88.9 MM)

2.2152-2.2160" (56.266-56.286 MM)
Rods:
2.4753-2.4761" (62.873-62.893 MM)
Main:
Main:
14H
Casting Numbers:
Comments:
Year
Thrust Width:
@ REAR
N9T 505 TURBO GAS
PEUGEOT
2.2
132
Stroke: 3.500" (88.9 MM)

2.2152-2.2160" (56.266-56.286 MM)
Rods:
2.4753-2.4761" (62.873-62.893 MM)
Main:
Main:
14H
Casting Numbers:
Comments:
505 GAS ZDJL
PEUGEOT
2.3
87-90
3.4646" (88.001 MM)
Cyl Bore:
141
77-81
XD2, XD2P4.94
3.700" (93.98 MM)

Stroke: 3.268" (83.007 MM)
Cyl Bore:
1.9679-1.9685" (49.985-50. MM)
Rods:
2.1651-2.1661" (54.994-55.019 MM)
Main:
Main:
Comments:
DIESEL, XD2, XD2P4.94, 4-STROKE, LIQUID COOLED 2 THKNS THRUST WASHERS AVLBL .090-.092 &
.098-.099
PEUGEOT
2.3
141
XD
85-88
XD2S,XD2PS
3.7010" (94.005 MM)

Stroke: 3.268" (83.007 MM)
Cyl Bore:
1.9678-1.9689" (49.982-50.01 MM)
Rods:
2.1651-2.1661" (54.994-55.019 MM)
Main:
@ CENTER
Main:
Thrust Width:
Comments:
TURBO DIESEL,XD2S,XD2PS,XD2PT,4-STROKE,LIQUID COOL 2 THKNS THRUST WASHERS AVLBL
.090-.092 & .098-.099
PEUGEOT
2.5
152
Stroke: 3.5433" (90. MM)

2.1651-2.1662" (54.994-55.021 MM)
Rods:
2.3620-2.3630" (59.995-60.02 MM)
Main:
Main:
Comments:
XD3PT TURBO DIESEL, 505 SEDAN
85-88
Cyl Bore:
3.701" (94.005 MM)
Thrust Width:
@ CENTER
PEUGEOT
PEUGEOT
6 Cylinders
2.8
174
87-88
Stroke: 2.874" (73. MM)

2.0577-2.0585" (52.266-52.286 MM)
Rods:
2.7575-2.7583" (70.041-70.061 MM)
Main:
Main:
505, FUEL INJ
Comments:
3.583" (91.008 MM)
Cyl Bore:
PORSCHE
PORSCHE
4 Cylinders
1.6
97
356C
Stroke: 2.9134" 74.000 MM)

2.0861-2.0866" (52.987-53. MM)
Rods:
1 1.9673-1.9681" (49.969-49.99 MM)
Main 1:
2&3 2.1642-2.1650" (54.971-54.991 MM)
Main 2:
4 1.5737-1.5741" (39.972-39.982 MM)
Main 3:
Balance: Internal
912, AIR COOLED
Comments:
PORSCHE
1.7
Stroke: 2.598" (66.000 MM)

2.1646-2.1654" (54.981-55.001 MM)
Rods:
#1-3 2.3610-2.3618" (59.969-59.990 MM)
Main 1:
#4 1.5740-1.5748" (39.980-40.000 MM)
Main:
Main 2:
Comments:
FUEL INJECTION
912
102
EA
60-69
3.2480" (82.499 MM)
Cyl Bore:
914
73
Cyl Bore:
3.543" (90.000 MM)
Thrust Width:
@ #1
417
XD3PT

Make
Liter
CID
Vin
Model
PORSCHE
PORSCHE
Year
Engine Model
4 Cylinders
1.7
102
EB
109
EC
73
2.1644-2.1652" (54.976-54.996 MM)

Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
FUEL INJECTION
Comments:
PORSCHE
1.8
Stroke: 2.598" (66.000 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main 1:
#4 1.5740-1.5748" (39.980-40.000 MM)
Main:
Main 2:
Comments:
FUEL INJECTION
PORSCHE
2.0
120
GA
Stroke: 2.7950" (70.993 MM)

1.9678-1.9683" (49.982-49.995 MM)
Rods:
1-3 2.3610-2.3618" (59.969-59.99 MM)
Main 1:
4 1.5742-1.5748" (39.985-40. MM)
Main:
Main 2:
Comments:
1971 CC, EFI, 914
PORSCHE
2.0
120
2.0
PORSCHE
2.0
121
121
2.0
121
PORSCHE
2.0
2.0
PORSCHE
2.0
@ #1
924
3.406" (86.512 MM)

.0008-.0027" (.020-.069 mm)
Thrust Width:
@ #3
924
121
76-79
Cyl Bore:
3.406" (86.512 MM)
Thrust Width:
@ #3
924
77
3.406" (86.512 MM)
924
M3
77-79
3.406" (86.512 MM)
Cyl Bore:
121
76-77
Cyl Bore:
Rod Fillet:
XE
Stroke: 3.307" (83.998 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
Comments:
TURBO 924, EFI, OHC, 1984 CC
Stroke: 3.307" (83.998 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
Comments:
EFI, OHC, 924, 1984 CC
Thrust Width:
Cyl Bore:
121
75-76
3.7008" (94.000 MM)
XF
Stroke: 3.307" (83.998 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
Comments:
EFI, OHC, 924, 1984 CC
PORSCHE
914
XG
Stroke: 3.307" (83.998 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
Comments:
EFI, OHC, 924, 1984 CC
73-74
3.7010" (94.005 MM)
Cyl Bore:
XH
Stroke: 3.307" (83.998 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
Comments:
EFI, OHC, 924, 1984CC
PORSCHE
914
GC
Stroke: 3.307" (83.998 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
Comments:
EFI, OHC, 924, 1984 CC
74-76
3.661" (93.000 MM)
Cyl Bore:
Stroke: 2.795" (71.000 MM)

1.9678-1.9685" (49.982-50. MM)
Rods:
1,2,3 2.3610-2.3618" (59.969-59.99 MM)
Main 1:
4 1.5742-1.5748" (39.985-40. MM)
Main:
Main 2:
Comments:
1971 CC, EFI, 914
PORSCHE
914
Cyl Bore:
924
80-82
Cyl Bore:
3.406" (86.512 MM)
Thrust Width:
@ #3
VC
924
Cyl Bore:
418
80-82
3.406" (86.512 MM)
(cont.)

Make
Liter
CID
Vin
Model
PORSCHE
PORSCHE
4 Cylinders
2.5
151
42
Stroke: 3.106" (78.892 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
#1 2.7547-2.7555" (69.969-69.99 MM)
Main:
Main:
3.540" (89.916 MM)
Rear Seal Diameter:
944
Casting Numbers:
Comments:
Year
924S
Engine Model
(cont.)
87-88
Cyl Bore:
Rod Fillet:
3.970" (100.838 MM)

3/32 (.094
Thrust Width:
1.182 @ #3
924S, 944, SOHC, MFI
PORSCHE
2.5
151
43D
Stroke: 3.106" (78.892 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
#1 2.7547-2.7555" (69.969-69.99 MM)
Main:
Main:
3.540" (89.916 MM)
Rear Seal Diameter:
944
Casting Numbers:
Comments:
944, SOHC, MFI 944
PORSCHE
2.5
151
2.5
151
PORSCHE
2.5
151
2.5
151
3.0
181
944
86-91
Cyl Bore:
Rod Fillet:
3.970" (100.838 MM)

3/32 (.094)
Thrust Width:
1.182 @ #3
944
88
Cyl Bore:
Rod Fillet:
3.970" (100.838 MM)

3/32 (.094)
Thrust Width:
1.182
944
89
Cyl Bore:
Rod Fillet:
3.970" (100.838 MM)

3/32 (.094)
Thrust Width:
1.182
45J
Stroke: 3.106" (78.892 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
#1 2.7547-2.7555" (69.969-69.99 MM)
Main:
Main:
3.540" (89.916 MM)
Rear Seal Diameter:
944
Casting Numbers:
Comments:
944S DOHC, M44.40
PORSCHE
1.182 @ #3
47
Stroke: 3.106" (78.892 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
#1 2.7547-2.7555" (69.969-69.99 MM)
Main:
Main:
3.540" (89.916 MM)
Rear Seal Diameter:
944
Casting Numbers:
Comments:
944 TURBO, SOHC, MFI
PORSCHE
Thrust Width:
46
Stroke: 3.106" (78.892 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
#1 2.7547-2.7555" (69.969-69.99 MM)
Main:
Main:
3.540" (89.916 MM)
Rear Seal Diameter:
944
Casting Numbers:
Comments:
944, SOHC, MFI
82-88
3.937" (100. MM)
3/32 (.094) (NM)
45H
Stroke: 3.106" (78.892 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
#1 2.7547-2.7555" (69.969-69.99 MM)
Main:
Main:
3.540" (89.916 MM)
Rear Seal Diameter:
944
Casting Numbers:
Comments:
944 TURBO, SOHC, MFI
PORSCHE
944
Cyl Bore:
Rod Fillet:
944S
87-88
Cyl Bore:
Rod Fillet:
3.970" (100.838 MM)

3/32 (.094)
Thrust Width:
1.182 @ #3
S2
968
92-95
2.0461-2.0468" (51.971-51.989 MM)

Rods:
2.7548-2.7555" (69.972-69.99 MM)
Main:
Main:
Comments:
DOHC, 968, M44.43/44 ENGINE, TURBO & NON-TURBO
PORSCHE
3.0
Stroke: 3.465" (88.000 MM)

2.0461-2.0468" (51.971-51.990 MM)
Rods:
2.7548-2.7555" (69.971-69.990 MM)
Main:
Main:
Comments:
944S2, DOHC, M44.41
182
944S2
89-91
Cyl Bore:
4.0940-4.0952" (104.000-104.020 MM)
Thrust Width:
1.181-1.183" @ #3
419

Make
Liter
CID
Vin
Model
Year
PORSCHE
PORSCHE
6 Cylinders
2.0
121
911
911
65-69
3.406" (86.512 MM)
Cyl Bore:
1.8878-1.8886" (47.95-47.97 MM)

Rods:
#1 2.5177-2.5185" (63.95-63.97 MM)
Main:
Main:
1991 CC, 911
Comments:
PORSCHE
2.0
121
914
Stroke: 2.598" (66.000 MM)

2.2437-2.2439" (56.990-56.995 MM)
Rods:
2.2437-2.2439" (56.990-56.995 MM)
Main 1:
#8 1.2197-1.2202" (30.980-30.993 MM)
Main:
Main 2:
Comments:
2 X 3 BBL CARB, 1991 CC, 914
PORSCHE
2.3
143
2.7
PORSCHE
3.0
Thrust Width:
@ #1
911E
164
65
183
62(3)
183
64(2)
72-73
3.3071" (84. MM)
Cyl Bore:
Stroke: 2.772" (71.400 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
2.2437-2.2439" (56.990-56.995 MM)
Main 1:
#8 1.2197-1.2202" (30.980-30.993 MM)
Main:
Main 2:
Comments:
EFI
-72
3.150" (80.000 MM)
61
Stroke: 2.7700" (70.358 MM)

2.0461-2.0468" (51.971-51.989 MM)
Rods:
2.2437-2.2439" (56.99-56.995 MM)
Main:
Main:
Comments:
911E, 911T
PORSCHE
914
Cyl Bore:
911S
74-76
Cyl Bore:
3.540" (89.916 MM)
Thrust Width:
@ #1
911
78-79
2.0855-2.0862" (52.972-52.989 MM)

Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
EFI, 911, 930
PORSCHE
3.0
Stroke: 2.772" (70.409 MM)

2.0850" (52.959 MM)
Rods:
2.3620" (59.995 MM)
Main:
Main:
Comments:
EFI, 911SC
PORSCHE
3.2
193
3.3
Thrust Width:
68(2)
Stroke: 2.929" (74.400 MM)

2.1642-2.1650" (54.971-54.991 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
911 TURBO, EFI, 930 TURBO
PORSCHE
3.3
201
67
PORSCHE
3.3
PORSCHE
3.6
Stroke: 3.012" (76.505 MM)

2.1642-2.1650" (54.971-54.991 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
CARRERA 2 & 4, 911
911
68
@ #1
911
Cyl Bore:
Thrust Width:
220
81-86
3.740" (94.996 MM)
Thrust Width:
201
78-86
3.8189" (97.000 MM)
Cyl Bore:
Stroke: 2.929" (74.397 MM)

2.0855-2.0862" (52.972-52.989 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
911 TURBO, MFI
@ #1
911
Cyl Bore:
Stroke: 2.930" (74.422 MM)

2.0855-2.0862" (52.972-52.989 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
911 TURBO, EFI(81-83), MPI(84-86)
M64
86-89
3.820" (97.028 MM)
@ #1
911 CARRERA
Cyl Bore:
420
84-89
3.740" (94.996 MM)
Cyl Bore:
201
80-83
3.740" (94.996 MM)
911 CARRERA
Stroke: 2.930" (74.422 MM)

2.0855-2.0862" (52.972-52.989 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
930102014
Casting Numbers:
Comments:
MFI, 911 CARRERA
PORSCHE
911SC
Cyl Bore:
89-96
3.937" (100. MM)
Engine Model

Make
Liter
CID
Vin
Model
PORSCHE
PORSCHE
4.7
285
83
5.0
302
928S
Thrust Width:
Thrust Width:
0.3
16
Cyl Bore:
0.6
37
0.7
46
0.8
48
52
52
1.0
58
1.1
67
Cyl Bore:
2.190" (55.626 MM)
Thrust Width:
@ #2
Cyl Bore:
2.280" (57.912 MM)
Thrust Width:
@ #2
Cyl Bore:
Rod Fillet:
2.165" (54.991 MM)

.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
2.560" (65.024 MM)

.094" (2.388 MM)
59-69
R839
R800
45-71
Stroke: 2.830" (71.882 MM)

1.7309-1.7315" (43.965-43.98 MM)
Rods:
#1 1.8103-1.8110" (45.982-45.999 MM)
Main:
Main:
10J, A12M, J049
Casting Numbers:
RENAULT
2.165" (54.991 MM)

.094" (2.388 MM)
.094" (2.388 MM)
Stroke: 3.150" (80.01 MM)

1.3763-1.3770" (34.958-34.976 MM)
Rods:
#1 1.5738-1.5744" (39.975-39.99 MM)
Main:
Main:
C.8308001, D.8308010
Casting Numbers:
RENAULT
Cyl Bore:
Rod Fillet:
Main Fillet:
R800
Stroke: 3.140" (79.756 MM)

1.4940-1.4951" (37.959-37.975 MM)
Rods:
1.5738-1.5744" (39.975-39.991 MM)
Main:
Main:
Comments:
GAS, OHV, R SERIES, R08 USED BY TORO
0.8
1.930" (49.022 MM)

.094" (2.388 MM)
R839
Stroke: 3.140" (79.756 MM)

1.4940-1.4951" (37.959-37.975 MM)
Rods:
1.5738-1.5744" (39.975-39.991 MM)
Main:
Main:
Comments:
GAS, OHV, R SERIES, USED BY TORO
0.8
45-58
Cyl Bore:
Rod Fillet:
Stroke: 3.150" (80.01 MM)

1.3763-1.3770" (34.958-34.976 MM)
Rods:
#1 1.5738-1.5744" (39.975-39.99 MM)
Main:
3/32 (NM)
Main:Seal Diameter:
Rear
C.8308001, D.8308010
Casting Numbers:
RENAULT
2.795" (70.993 MM)
4 Cylinders
Stroke: 3.150" (80.01 MM)

1.3763-1.3770" (34.958-34.976 MM)
Rods:
#1 1.5738-1.5744" (39.975-39.99 MM)
Main:
Main:
C.8308001, D.8308010
Casting Numbers:
RENAULT
@ #3
RC8D
RENAULT
RENAULT
85-86
3.940" (100.076 MM)
1 Cylinder
Stroke: 2.638" (67.005 MM)

1.6506-1.6512" (41.925-41.94 MM)
Rods:
MARINE DIESEL, 4 STROKE
Comments:
RENAULT
@ #3
928
Cyl Bore:
RENAULT
RENAULT
83-84
3.8187-3.8199" (96.995-97.025 MM)
Cyl Bore:
Stroke: 3.110" (78.994 MM)

2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.7540-2.7550" (69.952-69.977 MM)
Main:
Main:
Comments:
MPI, 928, DOHC
RENAULT
Engine Model
8 Cylinders
Stroke: 3.106" (78.892 MM)

2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.7548-2.7555" (69.972-69.99 MM)
Main:
Main:
MPI, 928S THRUST BRG WIDTH 1.1842 MAX
Comments:
PORSCHE
Year
62-67
R688
R688
2.7559" (70. MM)

Stroke: 2.834" (71.984 MM)
Cyl Bore:
1.7309-1.7315" (43.965-43.98 MM)
Rods:
2.1575" (54.801 MM) OR *
Main:
@ #3
Main:
Thrust Width:
1356, FD13, FD17
Casting Numbers:
Comments:
USED BY TORO & CASE,SOLD & DISTRBTD BY CONTINENTAL * OR 1.8102-1.8106" FOR SMALL MAIN
CRANK.
421

Make
Liter
CID
Vin
Model
Year
RENAULT
RENAULT
4 Cylinders
1.1
68
Stroke: 2.830" (71.882 MM)

1.7309-1.7315" (43.965-43.98 MM)
Rods:
#1 1.8106-1.8110" (45.989-45.999 MM)
Main:
Main:
10J, A12M, J049
Casting Numbers:
RENAULT
1.3
RENAULT
1.4
RENAULT
1.6
LE CAR 810
85
LE CAR
821
1.6
RENAULT
1.7
101
RENAULT
2.0
RENAULT
2.2
RENAULT
2.2
87
3.2280" (81.991 MM)
Cyl Bore:
Thrust Width:
@ #2
84-85
Cyl Bore:
3.465" (88.011 MM)
Cyl Bore:
3.460" (87.884 MM)
132
86-91
Thrust Width:
REO
@ #3
6 Cylinders
1.8
110
OA
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
OA110-SER #239237
Comments:
REO
@ #2
Stroke: 3.500" (88.9 MM)

2.2152-2.2160" (56.266-56.286 MM)
Rods:
2.4753-2.4761" (62.873-62.893 MM)
Main:
Main:
Comments:
OHC, MEDALLION, FUEGO, SPORTWAGON
REO
@ #3
85-87
Thrust Width:
Stroke: 3.504" (89.002 MM)

2.2152-2.2160" (56.266-56.286 MM)
Rods:
2.4753-2.4761" (62.873-62.893 MM)
Main:
Main:
Comments:
OHC, FUEGO, SPORTWAGON
R1348, R1358
3.1889-3.1902" (80.998-81.031 MM)
Cyl Bore:
132
81-84
Stroke: 3.661" (92.989 MM)

1.8897-1.8905" (47.998-48.019 MM)
Rods:
2.1568-2.1576" (54.783-54.803 MM)
Main:
Main:
Comments:
GTA, EFI
R16
3.110" (78.994 MM)
Thrust Width:
120
68-72
18I
Stroke: 3.287" (83.49 MM)

1.8897-1.8905" (47.998-48.019 MM)
Rods:
2.1568-2.1576" (54.783-54.803 MM)
Main:
Main:
499, 593
Casting Numbers:
Comments:
USED BY CHRYSLER ALSO
R1229, R1399
3.031" (76.987 MM)
Cyl Bore:
105
80-84
R16
Cyl Bore:
Stroke: 3.307" (83.998 MM)

1.8898-1.8906" (48.001-48.021 MM)
Rods:
2.1570-2.1580" (54.788-54.813 MM)
Main:
Main:
Comments:
18I, R1348, R1358, 843
R1228
2.992" (75.997 MM)
Cyl Bore:
95
76-79
2.874" (73. MM)
Cyl Bore:
Stroke: 3.307" (83.998 MM)

1.8898-1.8906" (48.001-48.021 MM)
Rods:
2.1576-2.1579" (54.803-54.811 MM)
Main:
Main:
Comments:
R 16, 1565 CC
RENAULT
59-71
79
Stroke: 3.031" (76.987 MM)

1.7309-1.7315" (43.965-43.98 MM)
Rods:
2.1572-2.1576" (54.793-54.803 MM)
Main:
Main:
Comments:
R1229, R1399, 847 LECAR
(cont.)
2.760" (70.104 MM)

.094" (2.388 MM)
Cyl Bore:
Rod Fillet:
Stroke: 3.031" (76.987 MM)

1.7309-1.7315" (43.965-43.98 MM)
Rods:
2.1572-2.1576" (54.793-54.803 MM)
Main:
Main:
Comments:
R1228, 810 LECAR
Engine Model
2.1
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
Comments:
OA130-SERIAL #239237
OA110
130
OA
OA110
3.625" (92.075 MM)
Cyl Bore:
OA130
Cyl Bore:
422
OA130
3.875" (98.425 MM)

Make
Liter
CID
Vin
Model
Year
REO
REO
6 Cylinders
2.3
145
OA
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
Comments:
REO
2.6
162
2.7
170
3.0
186
REO
3.0
186
3.1
190
3.4
Cyl Bore:
4.125" (104.775 MM)
Cyl Bore:
4.250" (107.95 MM)
6-162
6-170
6-186
OH186
4.250" (107.95 MM)
Cyl Bore:
4.250" (107.95 MM)
6-190
209
SCS209
Stroke: 4.375" (111.125 MM)

Cyl Bore:
1.9365-1.9375" (49.187-49.213 MM)
Rods:
Rod Fillet:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
Thrust Width:
F600C-600
Casting Numbers:
Comments:
SC-S209 CONTINENTAL * CAUTION ON THRUST CONFIGURATION
CONFIGURATION
REO
3.7
4.1
255
4.2
255
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
2.4975-2.4982" (63.437-63.454 MM)
Main:
Main:
Comments:
OA110, C-270 SERIES BUS
REO
4.2
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
#1 2.5075-2.5082" (63.691-63.708 MM)
Main:
Main:
1139-A3
Casting Numbers:
Comments:
OA255 AFTER SERIAL #239237
1.2420*
* CAUTION ON THRUST
Cyl Bore:
Rod Fillet:
3.313" (84.15 MM)

.125" (3.175 MM)
Thrust Width:
1.636*
OA
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
2.5075-2.5082" (63.691-63.708 MM)
Main:
Main:
Comments:
REO
SCS209
3.188" (80.975 MM)

1/8 (NM)
226
Stroke: 4.375" (111.125 MM)

2.0619-2.0627" (52.372-52.393 MM)
Rods:
#1 2.3774-2.3752" (60.386-60.33 MM)
Main:
Main:
F600C-600
Casting Numbers:
REO
OH186
Cyl Bore:
Stroke: 4.703" (119.456 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
Comments:
6-190
REO
4.125" (104.775 MM)
OH
Stroke: 4.250" (107.95 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
Comments:
OH186
REO
Cyl Bore:
Stroke: 4.250" (107.95 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
Comments:
6-186
(cont.)
OA145
4.125" (104.775 MM)
Stroke: 4.125" (104.775 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
Comments:
6-170
REO
OA145
Cyl Bore:
Stroke: 4.125" (104.775 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
Comments:
6-162
REO
Engine Model
OA255
OA255
Cyl Bore:
3.625" (92.075 MM)
Thrust Width:
@ FRONT
OA110
OA110
255
58-65
OA255
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
423
OA110
3.625" (92.075 MM)
Cyl Bore:
OA255
3.625" (92.075 MM)
7/64 (NM)
1/8
1.634 @ FRONT

Make
Liter
CID
Vin
Model
REO
REO
6 Cylinders
4.7
292
OA
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
2.5075-2.5082" (63.691-63.708 MM)
Main:
Main:
Comments:
REO
4.8
292
4.8
5.4
Thrust Width:
@ FRONT
OA130
292
5.4
331
OA
REO
5.4
REO
5.4
331
5.4
331
REO
5.9
REO
6.0
Stroke: 4.703" (119.456 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
Comments:
OH 200 ENGINE
Thrust Width:
@ FRONT
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
OH160
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
OH170
OH185
OH185
OH160
4.125" (104.775 MM)
.109" (2.769 MM)
.125
1.634
55-57
424
OH160
4.125" (104.775 MM)

7/64 (NM)
1/8
1.634 @ FRONT
57-67
59-67
OH200
Cyl Bore:
OA331
OH170
OH185
4.250" (107.95 MM)
Cyl Bore:
200
OA145
4.125" (104.775 MM)
Cyl Bore:
362
55-58
4.125" (104.775 MM)
OH170
Stroke: 4.125" (104.775 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
2.7485-2.7492" (69.812-69.83 MM)
Main:
Main:
1792-A3
Casting Numbers:
Comments:
OH-170, DC-503 SERIES TRUCK
Stroke: 4.250" (107.95 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
2.7485-2.7492" (69.812-69.83 MM)
Main:
Main:
1400-A3, 1792-A3
Casting Numbers:
Comments:
OH-185 & OH-186
58-67
OA331
OH160
OA292
4.125" (104.775 MM)
OH160
Stroke: 4.125" (104.775 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
#1 2.7485-2.7492" (69.812-69.83 MM)
Main:
Main:
1189-A3, 1224-A3, 1224S-A3, 1400-A3
Casting Numbers:
Comments:
OH-160
REO
55-58
Cyl Bore:
331
Stroke: 4.125" (104.775 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
#1 2.7485-2.7492" (69.812-69.83 MM)
Main:
Main:
1189-A3, 1224-A3, 1224S-A3, 1400-A3
Casting Numbers:
Comments:
OH160, OH170
OA130
3.875" (98.425 MM)

7/64 (NM)
1/8
1.634 @ FRONT
OA145
Stroke: 4.125" (104.775 MM)

Cyl Bore:
2.1805-2.1812" (55.385-55.402 MM)
Rods:
2.4975-2.4982" (63.437-63.454 MM)
Main:
Main:
Comments:
A-375, C-378, C-478, C-578 SERIES BUS,DC-403 TRUCK
REO
58-67
OA292
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
2.5075-2.5082" (63.691-63.708 MM)
Main:
Main:
Comments:
OA331-SERIAL #239237, A-375 & A-475 SERIES BUS
(cont.)
3.875" (98.425 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
331
Engine Model
OA292
3.875" (98.425 MM)
Cyl Bore:
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
#1 2.5075-2.5082" (63.691-63.708 MM)
Main:
Main:
1139-A3, 1189-A3, 1224-A3
Casting Numbers:
Comments:
OA292 AFTER SERIAL #239237
REO
OA292
Cyl Bore:
OA130
Stroke: 4.125" (104.775 MM)

2.1805-2.1812" (55.385-55.402 MM)
Rods:
2.4975-2.4982" (63.437-63.454 MM)
Main:
Main:
Comments:
OA130, C370 SERIES BUS
REO
Year
OH200
4.250" (107.95 MM)

Make
Liter
CID
Vin
Model
REO
6 Cylinders
6.6
REO
400
OH200
Stroke: 4.700" (119.38 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
3.1231-3.1238 *" (79.327-79.345 MM)
Main:
Main:
1792-A3
Casting Numbers:
Comments:
Year
OH200
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
61-67
OH200
4.250" (107.95 MM)

.109" (2.769 MM)
.125
1.634
E-456, E-556 SERIES TRUCKS * OR 2.7485-2.7492
REO
6.6
400
OH200
Stroke: 4.700" (119.38 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
#1 3.1231-3.1238" (79.327-79.345 MM)
Main:
Main:
1792-A3
Casting Numbers:
Comments:
OH-200
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
REO
REO
66-70
OH200
4.250" (107.95 MM)

.109" (2.769 MM)
.125
1.634
8 Cylinders
6.4
390
OV195
OV200
55-58
OV200
3.875" (98.425 MM)

Stroke: 4.125" (104.775 MM)
Cyl Bore:
2.4978-2.4985" (63.444-63.462 MM)
Rods:
2.9976-2.9988 *" (76.139-76.17 MM)
Main:
@ REAR
Main:
Thrust Width:
OV-200 (1956-58), OV-207 (1957-67) * OV-207: FRONT 3.1238-3.1235,OTHERS 3.1235-3.1242
Comments:
REO
6.4
391
Stroke: 4.125" (104.775 MM)

2.4978-2.4985" (63.444-63.462 MM)
Rods:
#1 2.9978-2.9985" (76.144-76.162 MM)
Main:
Main:
1489-A3, 1824-A3, DX-A3
Casting Numbers:
REO
Stroke:
Rods:
Main:
Main:
440
OV220
4.125" (104.775 MM)

2.4978-2.4985" (63.444-63.462 MM)
2.9976-2.9988" (76.139-76.17 MM)
7.2
440
4.125" (104.775 MM)

2.4978-2.4985" (63.444-63.462 MM)
FRONT 3.1231-3.1238" (79.327-79.345 MM)
OTHRS 3.1235-3.1242" (79.337-79.355 MM)
REO
7.2
OV235
OV220
@ REAR
OV235
56-67
Cyl Bore:
4.125" (104.775 MM)
Thrust Width:
@ REAR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.125" (104.775 MM)

9/64 (NM)
9/64
2.001
ROVER
OV235
4 Cylinders
2.0
122
Stroke: 3.513" (89.230 MM)

1.8759-1.8764" (47.648-47.661 MM)
Rods:
2.1262-2.1270" (54.005-54.026 MM)
Main:
Main:
TURBO DIESEL, LAND ROVER
Comments:
ROVER
55-57
4.125" (104.775 MM)
443
Stroke: 4.125" (104.775 MM)

2.4978-2.4985" (63.444-63.462 MM)
Rods:
#1 2.9978-2.9985" (76.144-76.162 MM)
Main:
Main:
1489-A3, 1824-A3, DX-A3
Casting Numbers:
ROVER
3.875" (98.425 MM)

.141" (3.581 MM)
.141
2.001
OV220
Cyl Bore:
Thrust Width:
REO
Stroke:
Rods:
Main 1:
Main:
Main 2:
7.2
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
2.3
Cyl Bore:
140
3.3245-3.3255" (84.442-84.469 MM)
78
3.562" (90.475 MM)

Stroke: 3.500" (88.9 MM)
Cyl Bore:
2.3120 LATE *" (58.725 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
@ CENTER
Main:
Thrust Width:
Comments:
GAS, SERIES 2A & 3 * EARLY MODELS=2.1250-2.1260
.008,.010 OVERSIZE THRUST BRGS
AVLBL
425

Make
Liter
CID
Vin
Model
Year
ROVER
6 Cylinders
2.5
ROVER
Engine Model
152
FREELANDER
02-05
3.1496-3.1508" (80.000-80.030 MM)

Stroke: 3.2598" (82.800 MM)
Cyl Bore:
2.1274-2.1281" (54.037-54.055 MM)
ROLLED *
Rods:
Rod Fillet:
2.6666-2.6673" (67.731-67.749 MM)
ROLLED *
Main:
Main Fillet:
Main:
LAND ROVER FREELANDER, DIR INJ PETROL, 24 VALVE * COLD ROLLED FILLETS ON ALL JOURNALS
Comments:
EXCEPT OUTER MAINS.
ROVER
8 Cylinders
3.5
ROVER
217
79-87
Stroke: 2.800" (71.12 MM)

2.0000-2.0005" (50.8-50.813 MM)
Rods:
#1 2.2996-2.3001" (58.409-58.422 MM)
Main:
Main:
1193645
Casting Numbers:
Comments:
ROVER
3.9
241
4.0
4.0
241
4.2
Cyl Bore:
3.701" (94.005 MM)
Thrust Width:
1.0625 @ #3
Cyl Bore:
3.7008-3.7020" (94.000-94.030 MM)
Cyl Bore:
3.701" (94.005 MM)
Thrust Width:
1.0620-1.0640" @ CENTER
Cyl Bore:
3.700" (94.000 MM)
4.6
Cyl Bore:
3.7008-3.7024" (94.000-94.040 MM)
Thrust Width:
@ CENTER
89-96
89-96
97
97-00
256
Stroke: 2.972" (75.500 MM)

1.9999-1.2005" (50.800-50.812 MM)
Rods:
2.2996-2.3001" (58.409-58.422 MM)
Main:
Main:
Comments:
RANGE ROVER, OHV
ROVER
1.0625 @ #3
241
Stroke: 2.800" (71.12 MM)

2.1850-2.1855" (55.499-55.512 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
HRC 2683
Casting Numbers:
Comments:
RANGE ROVER, DISCOVERY II OHV
ROVER
Thrust Width:
Stroke: 2.800" (71.120 MM)

2.1850-2.1855" (55.500-55.513 MM)
Rods:
2.4995-2.5000" (63.487-63.500 MM)
Main:
Main:
Comments:
RANGE ROVER, OHV
ROVER
3.500" (88.9 MM)
BUICK, LANDROVER
Stroke: 2.800" (71.12 MM)

2.0000-2.0005" (50.8-50.813 MM)
Rods:
#1 2.2996-2.3001" (58.41-58.423 MM)
Main:
Main:
1193645
Casting Numbers:
Comments:
RANGE ROVER, OHV
ROVER
Cyl Bore:
278
Stroke: 3.220" (81.788 MM)

2.1850-2.1855" (55.499-55.512 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
Comments:
SFI, RANGE ROVER, OHV
96-04
SAAB
SAAB
4 Cylinders
1.5
91
Stroke: 1.929" (48.997 MM)

2.1251-2.1260" (53.978-54. MM)
Rods:
#1 2.2433-2.2441" (56.98-57. MM)
Main:
Main:
11405645
Casting Numbers:
SAAB
1.7
Stroke: 3.071" (78.003 MM)

1.7500-1.7505" (44.45-44.463 MM)
Rods:
#1 2.1255-2.1250" (53.988-53.975 MM)
Main:
Main:
308129
Casting Numbers:
62-67
Cyl Bore:
3.701" (94.005 MM)
Cyl Bore:
3.2875" (83.503 MM)
104
68-72
426
KV6

Make
Liter
CID
Vin
Model
SAAB
SAAB
SAAB
Stroke:
Rods:
Main:
Main:
1.7
104
V-4
1.9
113
70-80
2.0
2.0
2.0
2.0
121
121
121
2.0
2.0
.065-.073" (1.650-1.850 MM)
Cyl Bore:
3.5433" (90. MM)
Cyl Bore:
3.543" (89.992 MM)
73-75
84-92
3.543" (89.992 MM)
86-94
2.1
Thrust Width:
129
SAAB
2.3
SAAB
2.3
Stroke: 3.5433" (90.000 MM)

2.0460-2.0470" (51.970-52.000 MM)
Rods:
2.2827-2.2835" (57.980-58.000 MM)
Main:
Main:
Comments:
SFI, NON-TURBO, 9-5 AERO
@ CENTER
91-93
AERO
98-03
AERO
98-03
Cyl Bore:
3.5430-3.5440" (90.000-90.040 MM)
Main Fillet:
.065-.073" (1.650-1.850 MM)
427
B235
3.5430-3.5440" (90.000-90.040 MM)
Cyl Bore:
140
B205
3.543" (89.992 MM)
3.661" (92.989 MM)
Cyl Bore:
140
@ CENTER
94-99
Stroke: 3.5433" (90.000 MM)

2.0460-2.0470" (51.970-52.000 MM)
Rods:
2.2827-2.2835" (57.980-58.000 MM)
Main:
Main:
Comments:
SFI, TURBO, 9-5 AERO
B202
3.540" (89.916 MM)
Cyl Bore:
Stroke: 3.071" (78.003 MM)

Cyl Bore:
2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Thrust Width:
Comments:
MFI, DOHC, TURBO, 900,ALSO VIN N&P,NON TURBO VIN J
SAAB
@ CENTER
B202
Stroke: 3.071" (78.003 MM)

2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Comments:
MFI, 900, 9000 DOHC
B201
@ CENTER
Thrust Width:
121
B201E
78-89
Cyl Bore:
121
B205
Main Fillet:
Thrust Width:
121
99-02
3.5430-3.5440" (90.000-90.040 MM)
B201
Stroke: 3.070" (77.978 MM)

2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.2830-2.2840" (57.988-58.014 MM)
Main:
Main:
22704Z14, 835159
Casting Numbers:
Comments:
TURBO, DOHC, 900, 900S, 9000
SAAB
9-3
Cyl Bore:
B201E
Stroke: 3.071" (78.003 MM)

2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Comments:
MFI, DOHC, TURBO, 900, 9000
SAAB
3.425" (86.995 MM)
Cyl Bore:
Stroke: 3.071" (78.003 MM)

2.0467-2.0472" (51.986-51.999 MM)
Rods:
2.2829-2.2835" (57.986-58.001 MM)
Main:
Main:
Comments:
SOHC, TURBO & NON-TURBO
SAAB
@ #2
1699CC, MODEL 95 & 96
Stroke: 3.071" (78.003 MM)

2.0468-2.0472" (51.989-51.999 MM)
Rods:
2.2830-2.2835" (57.988-58.001 MM)
Main:
Main:
Comments:
2BC OR EFI
SAAB
68-73
Thrust Width:
Stroke: 3.0709" (78.000 MM)

2.0460-2.0470" (51.970-52.000 MM)
Rods:
2.2827-2.2835" (57.980-58.000 MM)
Main:
Main:
Comments:
SFI, DOHC, TURBO, 1985 CC
SAAB
(cont.)
3.5433" (90. MM)
Cyl Bore:
3.071" (78.003 MM)

1.7500-1.7505" (44.45-44.463 MM)
2.1255-2.1260" (53.988-54. MM)
SAAB
Engine Model
4 Cylinders
Stroke: 2.6330" (66.878 MM)

2.1252-2.1260" (53.98-54. MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
69TM6303-EA
Casting Numbers:
Comments:
Year
B235

Make
Liter
CID
Vin
Model
SAAB
SAAB
4 Cylinders
2.3
140
Stroke: 3.543" (89.992 MM)

2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
MFI, TURBO, 900, 9000
Comments:
SAAB
2.3
140
(cont.)
90-95
96-99
3.5430-3.5440" (89.992-90.018 MM)
SAAB
6 Cylinders
2.5
152
Stroke: 3.130" (79.502 MM)

1.9279-1.9280" (48.969-48.971 MM)
Rods:
2.6760-2.6770" (67.97-67.996 MM)
Main:
Main:
DOHC, 900 SERIES
Comments:
SAAB
Engine Model
3.543" (89.992 MM)
Cyl Bore:
Stroke: 3.540" (89.916 MM)

Cyl Bore:
2.0460-2.0470" (51.968-51.994 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Comments:
SFI, NON-TURBO, 900, 9000, ALSO TURBO VINS M, R, U
SAAB
Year
3.0
94-98
3.210" (81.534 MM)
Cyl Bore:
181
B308
ARC SPORT WAGO
98-03
3.3848-3.3868" (85.975-86.025 MM)

Stroke: 3.3464" (85.000 MM)
Cyl Bore:
1.9280-1.9286" (48.971-48.987 MM)
Rods:
2.6764-2.6770" (67.980-67.996 MM)
Main:
Main:
Comments:
DOHC, TURBO, 9-5 ARC SPORT WAGON IMPORTANT!! - THE MAIN BEARING HALVES IN BEARING CAPS 2
AND 3 HAVE NO OILWAY.
SAAB
3.0
230
Stroke: 3.346" (84.988 MM)

2.1248-2.1256" (53.971-57.990 MM)
Rods:
2.6760-2.6770" (67.97-67.996 MM)
Main:
Main:
Comments:
SFI, DOHC, 900 & 9000 SERIES
95-98
3.3856-3.3860" (85.994-86.004 MM)
Cyl Bore:
SAME
SAME
2 Cylinders
1.8
110
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
DIESEL, DIR INJ
Comments:
SAME
2.1
110
3.8583" (98.001 MM)
Cyl Bore:
127
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
Comments:
DIESEL, DIR INJ
127
4.1339" (105.001 MM)
Cyl Bore:
SAME
SAME
3 Cylinders
2.7
166
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
DIESEL, DIR INJ
Comments:
SAME
3.1
166
3.8583" (98.001 MM)
Cyl Bore:
190
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
Comments:
DIESEL, DIR INJ
190
4.1339" (105.001 MM)
Cyl Bore:
SAME
SAME
4 Cylinders
3.6
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
DIESEL, DIR INJ
Comments:
221
221
Cyl Bore:
428
3.8583" (98.001 MM)
B308

Make
Liter
CID
Vin
Model
SAME
SAME
4 Cylinders
4.2
253
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
DIESEL, DIR INJ
Comments:
4.5
276
4.1339" (105.001 MM)
5.2
276
3.8583" (98.001 MM)
Cyl Bore:
317
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
Comments:
DIESEL, DIR INJ
317
4.1339" (105.001 MM)
Cyl Bore:
SAME
SAME
6 Cylinders
5.4
331
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
DIESEL, DIR INJ
Comments:
SAME
6.2
331
3.8583" (98.001 MM)
Cyl Bore:
380
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
03712100
Casting Numbers:
Comments:
DIESEL, DIR INJ 7630 ALLIS CHALMERS
380
4.1339" (105.001 MM)
Cyl Bore:
SATOH
SATOH
2 Cylinders
0.5
33
KE55
Stroke: 2.9528" (75.000 MM)

Cyl Bore:
1.7697-1.7703" (44.950-44.965 MM)
Rods:
2.3108-2.3114" (58.695-58.710 MM)
Main:
Main:
DIESEL, S-370 BEAVER TRACTOR, MFG BY MITSUBISHI
Comments:
SATOH
0.7
41
0.8
KE70
47
KE75
6 Cylinders
0.0
475
475
4.5276" (115.001 MM)
Cyl Bore:
2.9520-2.9527" (74.981-74.999 MM)

3.3457-3.3464" (84.981-84.999 MM)
SCANIA
0.0
477
Cyl Bore:
Rods:
Main:
Main:
KE75
3.0709-3.0720" (78.000-78.030 MM)
SCANIA
Rods:
Main:
Main:
KE70
2.8740-2.8752" (73.000-73.030 MM)
Stroke: 3.1496" (80.000 MM)

Cyl Bore:
1.8878-1.8884" (47.950-47.965 MM)
Rods:
2.3207-2.3213" (58.945-58.960 MM)
Main:
Main:
Comments:
SCANIA
KE55
2.6772-2.6784" (68.000-68.030 MM)
Stroke: 3.1496" (80.000 MM)

Cyl Bore:
1.7697-1.7703" (44.950-44.965 MM)
Rods:
2.3207-2.3213" (58.945-58.960 MM)
Main:
Main:
Comments:
SATOH
(cont.)
5 Cylinders
Stroke: 4.7244" (120. MM)

2.6744-2.6752" (67.93-67.95 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
DIESEL, DIR INJ
Comments:
SAME
Engine Model
253
Cyl Bore:
SAME
SAME
Year
2.9510-2.9527" (74.955-74.999 MM)

3.3465-3.3457" (85.001-84.981 MM)
429
477
4.5276" (115.001 MM)

Make
Liter
CID
Vin
Model
SCANIA
SCANIA
Year
Engine Model
6 Cylinders
7.8
475
(cont.)
475
475
4.528" (115.011 MM)

Cyl Bore:
.193-.201" (4.902-5.105 MM)
Rod Fillet:
2.0472-2.0512" (51.999-52.1 MM)
Rod Width:
3.3456-3.3464" (84.978-84.999 MM)
.193-.201" (4.902-5.105 MM)
Main:
Main Fillet:
Main:
DIESEL, DS801, DIR INJECT, 4 STROKE, LIQUID COOLED THRUST WASHER THKNS STD: .135-.133,
Comments:
OVERSIZE AVLBL
Stroke:
Rods:
4.921" (124.993 MM)

2.9520-2.9528" (74.981-75.001 MM)
SCANIA
9.0
547
547
Stroke: 5.6692" (144.000 MM)

3.1489-3.1496" (79.981-80.000 MM)
Rods:
3.5424-3.5433" (89.978-90.000 MM)
Main:
Main:
Comments:
DIESEL, 4 STROKE, DIR INJ
SCANIA
Stroke:
Rods:
11.0
672
1103
5.709" (145.009 MM)

3.3163-3.3170" (84.234-84.252 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
4.0000-4.0007" (101.6-101.618 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DN, DS, DSC TURBO/NON-TURBO, ALSO 1106 DN, DS, DSC
SCANIA
Stroke:
Rods:
11.1
674
5.709" (145.009 MM)

3.3162-3.3171" (84.231-84.254 MM)
SCANIA
0
866T
2 Cylinders
0.7
43
1100
Stroke: 3.150" (80.01 MM)

1.8878-1.8886" (47.95-47.97 MM)
Rods:
2.6752-2.6760" (67.95-67.97 MM)
Main:
Main:
DIESEL, USED IN FORD TRACTORS
Comments:
Cyl Bore:
SIMCA
58
1.1
66
1.3
Stroke: 2.953" (75.006 MM)

1.7320-1.7327" (43.993-44.011 MM)
Rods:
#1 1.8848-1.8855" (47.874-47.892 MM)
Main:
Main:
39055, XC38W-33
Casting Numbers:
79
67
Cyl Bore:
Rod Fillet:
Main Fillet:
2.680" (68.072 MM)

.094" (2.388 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
2.680" (68.072 MM)

.094" (2.388 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
2.910" (73.914 MM)

.094" (2.388 MM)
Stroke: 2.953" (75.006 MM)

1.5738-1.5748" (39.975-40. MM)
Rods:
#1 1.8848-1.8855" (47.874-47.892 MM)
Main:
Main: Numbers:
315+Y, 39055, XC38W-33
Casting
SIMCA
1100
2.953-2.954" (75.006-75.032 MM)
4 Cylinders
0.9
Stroke: 2.560" (65.024 MM)

1.6125-5.6129" (40.958-142.568 MM)
Rods:
#1 2.0459-2.0463" (51.966-51.976 MM)
Main:
Main: Numbers:
315+Y
Casting
SIMCA
866T
.188" (4.775 MM)
.188" (4.775 MM)
Rod Fillet:
Main Fillet:
SHIBAURA
SIMCA
674
5.000-5.001" (127.-127.025 MM)
.187" (4.75 MM)
2.329" (59.157 MM)
.187" (4.750 MM)
1.858-1.861
8 Cylinders
0.0
Stroke: 5.500" (139.7 MM)

3.5424-3.5433" (89.977-90. MM)
Rods:
4.0000-4.0007" (101.6-101.618 MM)
Main:
5.1185" (130.01 MM)
Main:Seal Diameter:
Rear
TURBO
Comments:
SHIBAURA
1103
5.000" (127. MM)
.189-.205" (4.801-5.207 MM)
2.323-2.328" (59.004-59.131 MM)
.189-.205" (4.801-5.207 MM)
@ #7
674
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.9999-4.00080" (101.597-101.62 MM)

Main:
Main:
56163M
Casting Numbers:
Comments:
2870, 4890 & 4894 CASE TRACTOR
SCANIA
DS9
4.5276" (115.000 MM)
.189-.205" (4.800-5.200 MM)
.189-.205" (4.800-5.200 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
60-65
60-76
430

Make
Liter
CID
Vin
Model
Year
SIMCA
SIMCA
8 Cylinders
2.4
143
Stroke: 3.374" (85.7 MM)

1.7545-1.7550" (44.564-44.577 MM)
Rods:
#1 2.0985-2.0990" (53.302-53.315 MM)
Main:
Main:
100C19, 107674
Casting Numbers:
54-61
Cyl Bore:
Rod Fillet:
2.598" (65.989 MM)

.094" (2.388 MM)
SLANZI
SLANZI
2 Cylinders
1.8
107
DVA1500
Stroke: 3.465" (88.011 MM)

2.2484-2.2489" (57.109-57.122 MM)
Rods:
FRONT 2.2826-2.2835" (57.978-58.001 MM)
Main 1:
CENTR 2.4791-2.4796" (62.969-62.982 MM)
Main 2:
REAR 2.2826-2.2835" (57.978-58.001 MM)
Main 3:
Comments:
3.779" (95.987 MM)
Thrust Width:
@ CENTER
6 Cylinders
2.5
153
87-88
Stroke: 2.950" (74.93 MM)

2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
FUEL INJ, 825
Comments:
STERLING
2.7
Cyl Bore:
Thrust Width:
163
Thrust Width:
@ #3
6 Cylinders
0.0
1R
49-54
Cyl Bore:
3.000" (76.2 MM)
0.0
Cyl Bore:
3.000" (76.2 MM)
Cyl Bore:
3.0000" (76.2 MM)
Cyl Bore:
3.000" (76.2 MM)
Cyl Bore:
3.000" (76.2 MM)
Cyl Bore:
Rod Fillet:
3.000" (76.2 MM)

.125" (3.175 MM)
Thrust Width:
1.354" (34.392 MM)
2R
49-56
1.8117-1.8127" (46.017-46.043 MM)
STUDEBAKER
Rods:
Main:
Main:
3.4252-3.4260" (87.-87.02 MM)
1.8117-1.8127" (46.017-46.043 MM)
STUDEBAKER
Rods:
@ #3
87-92
Cyl Bore:
STUDEBAKER
Rods:
3.300" (83.82 MM)
C27A1
Stroke: 2.953" (75.006 MM)

2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.5187-2.5197" (63.975-64. MM)
Main:
Main:
Comments:
MFI, SOHC, 827
STUDEBAKER
DVA1500
Cyl Bore:
STERLING
STERLING
2.6
164
39-40
1.8115-1.8125" (46.012-46.038 MM)

2.4370-2.4375" (61.890-61.912 MM)
STUDEBAKER
2.7
170
43-54
Stroke: 4.000" (101.6 MM)

1.8117-1.8127" (46.017-46.043 MM)
Rods:
2.4370-2.4375" (61.9-61.913 MM)
Main:
Main:
199966, 521525
Casting Numbers:
Comments:
169.6 CUBIC INCH
STUDEBAKER
2.7
170
1E
Stroke: 4.000" (101.6 MM)

1.8117-1.8127" (46.017-46.043 MM)
Rods:
3.0623-3.0628" (77.782-77.795 MM)
Main:
Main:
1550774, 534231, 534254, 534521, 535377
Casting Numbers:
STUDEBAKER
Engine Model
2.8
55-64
169
Stroke: 4.000" (101.6 MM)

1.8118-1.8128" (46.02-46.045 MM)
Rods:
#1 2.4370-2.4375" (61.9-61.913 MM) *
Main:
Main:
2.235-2.238" (56.769-56.845 MM)
Rear Seal Diameter:
176254, 521525
Casting Numbers:
43-54
431

Make
Liter
CID
Vin
Model
STUDEBAKER
STUDEBAKER
Year
Engine Model
6 Cylinders
2.8
170
55-60
3.000" (76.2 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.8118-1.8128" (46.02-46.045 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 3.0623-3.0628" (77.782-77.795 MM)
Main:
1.354
Main:
Thrust Width:
1547105, 1550774, 189986, 189986, 199966, 199966, 521525, 521526, 521526, 908292, 908292
Casting Numbers:
Comments:
TRUCK
STUDEBAKER
3.0
185
55-58
Stroke: 4.375" (111.125 MM)

Cyl Bore:
1.8118-1.8128" (46.02-46.045 MM)
Rods:
Rod Fillet:
#1 3.0623-3.0628" (77.782-77.795 MM)
Main:
Main:
Thrust Width:
2.235-2.238" (56.769-56.845 MM)
Rear Seal Diameter:
176254, 186433, 534231, 534251, 534254, 534521, 535377
Casting Numbers:
Comments:
185 WORKSTAR TRUCK
STUDEBAKER
3.0
185
1E
Stroke: 4.375" (111.125 MM)

1.8117-1.8127" (46.017-46.043 MM)
Rods:
2.235-2.238" (56.769-56.845 MM)
Rear Seal Diameter:
Comments:
TRUCK
STUDEBAKER
3.2
4.0
55-58
3.000" (76.2 MM)
Cyl Bore:
Rod Fillet:
3.5625" (90.488 MM)

.125" (3.175 MM)
Thrust Width:
1.015" (25.781 MM)
Cyl Bore:
Rod Fillet:
3.313" (84.15 MM)

.125" (3.175 MM)
Thrust Width:
1.415" (35.941 MM)
65-66
246
50-60
Stroke: 4.750" (120.65 MM)

2.1868-2.1878" (55.545-55.57 MM)
Rods:
#1 2.8745-2.8750" (73.012-73.025 MM)
Main:
Main:
523168
Casting Numbers:
Comments:
TRUCK, COMMANDER 1949-50
STUDEBAKER
STUDEBAKER
8 Cylinders
3.6
224
55-56
Stroke: 2.813" (71.45 MM)

1.9992-2.0002" (50.78-50.805 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
2.236" (56.794 MM)
Main:
Rear Seal Diameter:
224 ROUTESTAR TRUCK
Comments:
STUDEBAKER
3.6
224
Stroke: 2.813" (71.45 MM)

1.9992-2.0002" (50.78-50.805 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
2.236" (56.794 MM)
Main:
Rear Seal Diameter:
Comments:
TRUCK
STUDEBAKER
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
1.354" (34.392 MM)
Cyl Bore:
194
Stroke: 3.250" (82.55 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2.430" (61.722 MM)
Rear Seal Diameter:
3788424, 3820618, 3820618N
Casting Numbers:
Comments:
CHEVROLET
STUDEBAKER
3.000" (76.2 MM)

.125" (3.175 MM)
3.7
2.810" (71.374 MM)

1.9993-2.0003" (50.782-50.808 MM)
2.4995-2.5000" (63.487-63.5 MM)
2.4995-2.5000" (63.487-63.5 MM)
2.4995-2.5000" (63.487-63.5 MM)
2.5000-2.5005" (63.5-63.513 MM)
2.4995-2.5000" (63.487-63.5 MM)
Cyl Bore:
3.563" (90.5 MM)
Cyl Bore:
3.563" (90.5 MM)
Cyl Bore:
Rod Fillet:
3.563" (90.5 MM)

.125" (3.175 MM)
Thrust Width:
1.324" (33.630 MM)
2E
55-56
224
56-64
2.236" (56.794 MM)

Rear Seal Diameter:
523135, 523774, 533439
Casting Numbers:
Comments:
TRUCK TRUCK
432
(cont.)

Make
Liter
CID
Vin
Model
STUDEBAKER
8 Cylinders
3.8
STUDEBAKER
232
51-54
Stroke: 3.250" (82.55 MM)

Cyl Bore:
1.9993-2.0003" (50.782-50.808 MM)
Rods:
Rod Fillet:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
Thrust Width:
2.236" (56.794 MM)
Rear Seal Diameter:
3788424, 3820618, 3820618N, 526831, 526832, 530081, 536452
Casting Numbers:
Comments:
3.375" (85.725 MM)

.125" (3.175 MM)
1.324" (33.630 MM)
232 PASS CAR
STUDEBAKER
4.2
259
55-64
Stroke: 3.250" (82.55 MM)

1.9993-2.0003" (50.782-50.808 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
2.236" (56.794 MM)
Rear Seal Diameter:
526831, 526832, 530081, 536452
Casting Numbers:
Comments:
259 POWERSTAR TRUCK
STUDEBAKER
4.2
259
STUDEBAKER
4.6
STUDEBAKER
4.7
4.7
289
4.7
289
4.9
3.563" (90.5 MM)
Cyl Bore:
Rod Fillet:
3.250" (82.55 MM)

.125" (3.175 MM)
Thrust Width:
1.597" (40.564 MM)
55-64
57-64
5.0
Stroke: 3.630" (92.202 MM)

1.9993-2.0003" (50.782-50.808 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
2.236" (56.794 MM)
Rear Seal Diameter:
180590, 526956, 537424
Casting Numbers:
Cyl Bore:
Rod Fillet:
3.5625" (90.488 MM)

.125" (3.175 MM)
Thrust Width:
1.324" (33.630 MM)
Cyl Bore:
3.5625" (90.488 MM)
Cyl Bore:
3.5625" (90.488 MM)
Cyl Bore:
3.656" (92.862 MM)
Cyl Bore:
Rod Fillet:
3.656" (92.862 MM)

.125" (3.175 MM)
Thrust Width:
1.324" (33.630 MM)
6E
57-64
7E
59-64
304
Stroke: 3.625" (92.075 MM)

1.9992-2.0002" (50.78-50.805 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
2.236" (56.794 MM)
Main:
Rear Seal Diameter:
STUDEBAKER
Cyl Bore:
289
Stroke: 3.625" (92.075 MM)

1.9992-2.0002" (50.78-50.805 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
2.236" (56.794 MM)
Main:
Rear Seal Diameter:
STUDEBAKER
1.324
117111, 302811, 304852, 320428, 3727449, 3734627, 3815822, 3876764, C116-LM
Stroke: 3.625" (92.075 MM)

1.9992-2.0002" (50.78-50.805 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
2.236" (56.794 MM)
Main:
Rear Seal Diameter:
STUDEBAKER
Thrust Width:
39-47
Stroke: 3.630" (92.202 MM)

1.9993-2.0003" (50.782-50.808 MM)
Rods:
#1 2.4995-2.5000" (63.487-63.5 MM)
Main:
Main:
2.236" (56.794 MM)
Rear Seal Diameter:
180590, 526956, 537424
Casting Numbers:
Comments:
289 TORQUESTAR
STUDEBAKER
3.563" (90.5 MM)

.125" (3.175 MM)
282
4.250" (107.95 MM)

2.0937-2.0947" (53.18-53.205 MM)
2.7465-2.7470" (69.761-69.774 MM)
2.7465-2.7470" (69.761-69.774 MM)
2.7465-2.7470" (69.761-69.774 MM)
2.7465-2.7470" (69.761-69.774 MM)
2.2978-2.2988" (58.364-58.39 MM)
Casting Numbers:
Cyl Bore:
Rod Fillet:
5E
Stroke: 3.250" (82.55 MM)

1.9992-2.0002" (50.78-50.805 MM)
Rods:
2.4995-2.5000" (63.487-63.5 MM)
Main:
2.236" (56.794 MM)
Main:
Rear Seal Diameter:
Comments:
259 TRUCK
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
Year
64-65
304
63-64
433
Engine Model
(cont.)

Make
Liter
CID
Vin
Model
STUDEBAKER
STUDEBAKER
8 Cylinders
5.7
352
Cyl Bore:
Rod Fillet:
4.000" (101.6 MM)

.125" (3.175 MM)
Thrust Width:
2.063" (52.400 MM)
SUBARU
1.2
72
1.2
JUSTY
Thrust Width:
72
83
1400
1.4
83
1.6
97
97
1.8
1.8
3.346" (84.988 MM)
Cyl Bore:
3.622" (91.999 MM)
Cyl Bore:
3.622" (91.999 MM)
76-76
76-77
78-86
Thrust Width:
109
4,5,7
Stroke: 2.638" (67.005 MM)

1.7712-1.7717" (44.988-45.001 MM)
Rods:
2.1637-2.1642" (54.958-54.971 MM)
Main:
Main:
Comments:
OHV, EA81
SUBARU
Cyl Bore:
Stroke: 2.362" (59.995 MM)

1.7712-1.7717" (44.988-45.001 MM)
Rods:
1 & 3 1.9667-1.9673" (49.954-49.969 MM)
Main 1:
2 1.9672-1.9678" (49.967-49.982 MM)
Main:
Main 2:
Comments:
OHV, 2BC, 1600
SUBARU
3.346" (84.988 MM)
1600
Stroke: 2.362" (59.995 MM)

1.7712-1.7717" (44.988-45.001 MM)
Rods:
1.9667-1.9673" (49.954-49.969 MM)
Main:
Main:
Comments:
OHV, 2BC, 1600
1.6
73-75
Cyl Bore:
1400
Stroke: 2.362" (59.995 MM)

1.7712-1.7717" (44.988-45.001 MM)
Rods:
1.9667-1.9673" (49.954-49.969 MM)
Main:
Main:
Comments:
OHV, 2BC
SUBARU
EF12
Thrust Width:
109
4,5,7
1.8
109
434
EA71
EA71
EA81
@ CENTER
EA82
3.622" (91.999 MM)
@ CENTER
89-94
Cyl Bore:
1400
3.622" (91.999 MM)
85-88
4,5,7
Stroke: 2.638" (67.005 MM)

1.7715-1.7720" (44.996-45.009 MM)
Rods:
FRONT 2.1637-2.1642" (54.958-54.971 MM)
Main 1:
CENTR 2.1635-2.1642" (54.953-54.971 MM)
Main:
Main 2:
REAR 2.1636-2.1642" (54.955-54.971 MM)
Main 3:
Comments:
SOHC, ALL MODELS EXCEPT 2 DR(GL, STD) & BRAT
1400
CENTER
80-89
Cyl Bore:
Stroke: 2.638" (67.005 MM)

Cyl Bore:
1.7715-1.7720" (44.996-45.009 MM)
Rods:
2.1637-2.1642" (54.958-54.971 MM)
Main:
Main:
Thrust Width:
Comments:
SOHC, ALL MODELS EXCEPT 2 DR (GL, STD) & BRAT
SUBARU
90-94
3.070" (77.978 MM)
4 Cylinders
1.4
Stroke: 2.402" (61.011 MM)

1.7712-1.7717" (44.988-45.001 MM)
Rods:
1.9667-1.9673" (49.954-49.969 MM)
Main:
Main:
OHV, 2BC
Comments:
SUBARU
EF12
@ #4
JUSTY
Cyl Bore:
SUBARU
SUBARU
87-94
3.070" (77.978 MM)
Cyl Bore:
Stroke: 3.270" (83.058 MM)

1.6531-1.6535" (41.989-41.999 MM)
Rods:
1.6525-1.6529" (41.974-41.984 MM)
Main:
Main:
Comments:
SOHC, MFI, JUSTY
SUBARU
(cont.)
3 Cylinders
Stroke: 3.270" (83.058 MM)

1.6531-1.6535" (41.989-41.999 MM)
Rods:
1.6525-1.6529" (41.974-41.984 MM)
Main:
Main:
SOHC, 2BC & MFI, JUSTY
Comments:
SUBARU
Engine Model
56-59
Stroke: 3.500" (88.9 MM)

2.2497-2.2507" (57.142-57.168 MM)
Rods:
#1 2.4990-2.4995" (63.475-63.487 MM)
Main:
Main:
2.236" (56.794 MM)
Rear Seal Diameter:
300102, 3144388, HAWK
Casting Numbers:
SUBARU
Year
3.6214-3.6226" (91.984-92.014 MM)
EA82

Make
Liter
CID
Vin
Model
Year
SUBARU
SUBARU
4 Cylinders
1.8
111
Stroke: 2.953" (75.006 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3616-2.3622" (59.985-60. MM)
Main:
Main:
SOHC, IMPREZA, LEGACY
Comments:
SUBARU
2.0
IMPREZA
(cont.)
93-96
EJ18E
3.4600-3.4612" (87.884-87.914 MM)
Cyl Bore:
122
Engine Model
IMPREZA WRX
02-05
EJ20T
3.6218-3.6226" (91.995-92.015 MM)

Stroke: 2.9528" (75.000 MM)
Cyl Bore:
2.0466-2.0472" (51.983-51.998 MM) *
Rods:
ALL 2.3619-2.3625" (59.992-60.008 MM)
Main:
@ #3
Main:
Thrust Width:
Balance: Internal
3.7480-3.7520" (95.199-95.301 MM)
Rear Seal Diameter:
Comments:
DOHC, TURBO, MPI, WAGON & SEDAN * 2002 ONLY: ROD JOURNAL DIAMETER 1.8891-1.8898"
(47.983-48.000 MM).
SUBARU
2.2
135
AWD
Stroke: 2.950" (75.000 MM)

Cyl Bore:
2.0466-2.0472" (51.984-52.000 MM)
Rods:
2.3619-2.3625" (59.992-60.008 MM)
Main:
Main:
Thrust Width:
1297" (32.943 MM)
3.384" (85.953 MM)
Rear Seal Diameter:
Comments:
SOHC,SFI, IMPREZA, LEGACY, OUTBACK & OUTBACK SPORT
SUBARU
2.2
135
6,3
Stroke: 2.950" (74.93 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3619-2.3625" (59.992-60.008 MM)
Main:
Main:
Comments:
SOHC, SFI, IMPREZA, NON TURBO
SUBARU
2.2
135
6,7,8
SUBARU
2.2
135
95-01
EJ22E
3.8148-3.8155" (96.896-96.914 MM)
LEGACY
90-00
EJ22
3.820" (97.028 MM)
Cyl Bore:
6,7
EJ22E
.8652-8685" (2197-22.059 MM)
IMPREZA
Cyl Bore:
Stroke: 2.950" (74.93 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3616-2.3622" (59.985-60. MM)
Main:
Main:
Comments:
SOHC, MFI, TURBO EJ22T & NON/TURBO, LEGACY
95-01
3.8151-3.8155" (96.905-96.915 MM)
LEGACY
91-94
EJ22
3.8144-3.8155" (96.886-96.914 MM)

Stroke: 2.953" (75.006 MM)
Cyl Bore:
2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3616-2.3622" (59.985-60. MM)
Main:
Main:
Comments:
SOHC, MFI, TURBO EJ22T & NON/TURBO, LEGACY *TURBO OIL CLEAR .0010-.0021
SUBARU
2.5
150
IMPREZA
Stroke: 3.110" (79.000 MM)

Cyl Bore:
2.0466-2.0472" (51.984-52.000 MM)
Rods:
2.3619-2.3625" (59.992-60.008 MM)
Main:
Main:
Thrust Width:
Balance: Internal
1.297" (32.943 MM)
3.384" (85.953 MM)
Rear Seal Diameter:
Comments:
SOHC,MFI,IMPREZA TS WAGON,LEGACY OUTBACK,FORESTER
SUBARU
2.5
150
99-04
EJ25
3.9171-3.9179" (99.495-99.515 MM)
.864" @ #2
LEGACY
96-05
EJ25D
3.9170-3.9200" (99.491-99.568 MM)

Stroke: 3.110" (78.994 MM)
Cyl Bore:
1996-98=1.8891-1.8898" (47.983-48.001 MM) *
Rods:
2.3619-2.3625" (59.992-60.008 MM)
Main:
.864" @ #3
Main:
Thrust Width:
Balance: Internal
1.297" (32.943 MM)
3.384" (85.953 MM)
Rear Seal Diameter:
Comments:
DOHC, AWD, LEGACY, FORESTER, IMPREZA * 1999=2.0466-2.0472" (51.984-52.000 MM)
SUBARU
SUBARU
6 Cylinders
2.7
164
Stroke: 2.638" (67.005 MM)

1.7715-1.7720" (44.996-45.009 MM)
Rods:
1,2,4 2.1636-2.1643" (54.955-54.973 MM)
Main 1:
3 2.1635-2.1642" (54.953-54.971 MM)
Main 2:
SOHC, XT-6, ER27, W/O AIR SUSPENSION
Comments:
XT-6
Cyl Bore:
Thrust Width:
435
88-91
ER27
3.6214-3.6226" (91.984-92.014 MM)
@ #3

Make
Liter
CID
Vin
Model
Year
SUBARU
SUBARU
6 Cylinders
2.7
164
Stroke: 2.638" (67.005 MM)

1.7715-1.7720" (44.996-45.009 MM)
Rods:
1,2,4 2.1636-2.1643" (54.955-54.973 MM)
Main 1:
3 2.1635-2.1642" (54.953-54.971 MM)
Main 2:
SOHC, XT-6, ER27, WITH AIR SUSPENSION
Comments:
SUBARU
3.0
183
3.3
Stroke: 2.953" (75.006 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3619-2.3625" (59.992-60.008 MM)
Main:
Main:
Comments:
DOHC, SVX, MFI
SUBARU
3.3
202
SVX
SUPERIOR
92-95
SVX
96-97
50.2
3064
6G-510
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
6G-510, 50.2L GAS
SUPERIOR
8 Cylinders
108.1
6597
Stroke: 10.500" (266.7 MM)

5.749-5.751" (146.025-146.075 MM)
Rods:
5.9990-6.0001" (152.375-152.403 MM)
Main:
Main:
G-825 GAS
Comments:
G-825
G-825
Cyl Bore:
10.000-10.002" (254.-254.051 MM)
Thrust Width:
4.127-4.130
SUZUKI
1 Cylinder
0.1
Stroke: 1.450" (36.83 MM)

.6285-.6289" (15.964-15.974 MM)
Rods:
.6686-.6690" (16.982-16.993 MM)
Main:
Main:
GAS, GENERATOR, 4 STROKE, AIR COOLED, 1.0 HP
Comments:
0.1
0.1
0.1
SE300
SE300
1.730" (43.942 MM)
Cyl Bore:
SE500
SE500
1.770" (44.958 MM)
Cyl Bore:
Stroke: 1.450" (36.83 MM)

.7075-.7079" (17.971-17.981 MM)
Rods:
.6686-.6690" (16.982-16.993 MM)
Main:
Main:
Comments:
GY20D
Cyl Bore:
436
GY15D
1.770" (44.958 MM)
Cyl Bore:
Stroke: 1.570" (39.878 MM)

.7083-.7087" (17.991-18.001 MM)
Rods:
Comments:
SUZUKI
GY15D
Stroke: 1.570" (39.878 MM)

.7083-.7087" (17.991-18.001 MM)
Rods:
Comments:
GAS, GENERATOR, 4 STROKE, AIR-COOLED, 0.9 HP
SUZUKI
6G-510
8.500-8.501" (215.9-215.925 MM)

.313" (7.95 MM)
3.250-3.254" (82.55-82.652 MM)
.313" (7.950 MM)
5.375-5.377
SUPERIOR
SUZUKI
EG33D
6 Cylinders
#1 4.9990-5.0000" (126.975-127. MM)

Main:
Main:
U-9509-B140
Casting Numbers:
SUZUKI
EG33D
3.815" (96.901 MM)
Cyl Bore:
9.000" (228.6 MM)

4.7490-4.7500" (120.625-120.65 MM)
Comments:
EZ30D
3.8144-3.8155" (96.886-96.914 MM)
SUPERIOR
Stroke:
Rods:
01-05
3.5116-3.5124" (89.195-89.215 MM)
Cyl Bore:
Stroke: 2.950" (74.93 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3619-2.3625" (59.992-60.008 MM)
Main:
Main:
Comments:
DOHC, SVX, SFI
ER27
@ #3
OUTBACK
Cyl Bore:
202
88-91
Thrust Width:
EZ
(cont.)
3.6214-3.6226" (91.984-92.014 MM)
Cyl Bore:
Stroke: 3.1496" (80.000 MM)

2.0466-2.0472" (51.984-52.000 MM)
Rods:
ALL 2.5194-2.5200" (63.992-64.008 MM)
Main:
Main:
Comments:
DOHC, OUTBACK VDC SEDAN
SUBARU
XT-6
Engine Model
GY20D
2.047" (51.994 MM)

Make
Liter
CID
Vin
Model
Year
SUZUKI
SUZUKI
1 Cylinder
0.1
SE700
1.890" (48.006 MM)
SUZUKI
4 Cylinders
1.0
59
F10A
Stroke: 2.8346" (72.000 MM)

1.4955-1.4961" (37.985-38.000 MM)
Rods:
1.9679-1.9685" (49.985-50.000 MM)
Main:
Main:
970 CC ENGINE
Comments:
SUZUKI
1.3
79
1.3
79
SUZUKI
1.3
79
1.6
1.6
97
1.6
1.6
89-91
G13K
2.913" (73.99 MM)
Cyl Bore:
2.9528-2.9535" (75.001-75.019 MM)
89-95
92-93
2.9528-2.9535" (75.001-75.019 MM)
SIDEKICK
G16
@ #3
SIDEKICK
Cyl Bore:
97
G13K
2.913" (73.99 MM)
SWIFT
Cyl Bore:
97
92-94
G13A
Cyl Bore:
Stroke: 3.540" (89.916 MM)

1.7316-1.7323" (43.983-44. MM)
Rods:
2.0465-2.0472" (51.981-51.999 MM)
Main:
Main:
Comments:
SOHC, PFI, 16 VALVE, SIDEKICK
SUZUKI
SIDEKICK
Thrust Width:
Stroke: 3.543" (89.992 MM)

1.7316-1.7323" (43.983-44. MM)
Rods:
#1 2.0470-2.0472" (51.994-51.999 MM)
Main 1:
#2 2.0468-2.0470" (51.989-51.994 MM)
Main:
Main 2:
#3 2.0465-2.0468" (51.981-51.989 MM)
Main 3:
Comments:
DOHC, 16 VALVE, SIDEKICK
SUZUKI
.955-.956 @ #4
Stroke: 3.543" (89.992 MM)

1.7316-1.7323" (43.983-44. MM)
Rods:
MRK#1 2.0465-2.0472" (51.981-51.999 MM)
Main 1:
MRK#2 2.0468-2.0470" (51.989-51.994 MM)
Main:
Main 2:
MRK#3 2.0465-2.0468" (51.981-51.989 MM)
Main 3:
G16, K-N
Casting Numbers:
Comments:
SOHC, TBI, 8 VALVE THRUST BRG LENGTH .099
SUZUKI
Thrust Width:
97
85-95
2.9134-2.9142" (74.-74.021 MM)
Cyl Bore:
Stroke: 3.032" (77.013 MM)

1.6532-1.6537" (41.991-42.004 MM)
Rods:
1.7709-1.7717" (44.981-45.001 MM)
Main:
Main:
Comments:
DOHC, G13K, TBI AND/OR MFI, SWIFT
SUZUKI
SAMURAI
Cyl Bore:
Stroke: 2.972" (75.489 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
#1 1.7714-1.7716" (44.994-44.999 MM)
Main 1:
#2 1.7712-1.7714" (44.988-44.994 MM)
Main:
Main 2:
#3 1.7710-1.7712" (44.983-44.988 MM)
Main 3:
Comments:
DOHC, G13K, TBI AND/OR MFI, SIDEKICK
F10A
2.5787" (65.500 MM)
Cyl Bore:
Stroke: 3.031" (76.987 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
ALL 1.7710-1.7716" (44.983-44.999 MM)
Main:
Main:
Balance: Internal
G13A
Casting Numbers:
Comments:
SOHC, SAMURAI, GEO TRACKER IN 1992
SUZUKI
(cont.)
SE700
Stroke: 1.850" (46.99 MM)

Cyl Bore:
.7870-.7874" (19.99-20. MM)
Rods:
GAS,GENERATOR,ALSO SE700A,4 STROKE,AIR COOL,1.6 HP
Comments:
SUZUKI
Engine Model
94-98
2.950" (74.93 MM)
TRUCK
99-01
G16
2.9528-2.9535" (75.001-75.019 MM)

Stroke: 3.543" (89.992 MM)
Cyl Bore:
1.7316-1.7323" (43.982-44.000 MM)
Rods:
2.0465-2.0472" (51.982-52.000 MM)
Main:
Main:
Comments:
DOHC, MFI, VITARA CRANKSHAFT THRUST BEARING THICKNESS STD .098" (2.500 MM)
SUZUKI
1.8
110
SIDEKICK
96-02
3.3071-3.3079" (84.-84.021 MM)

Stroke: 3.202" (81.331 MM)
Cyl Bore:
1.9678-1.9685" (49.982-50. MM) *
Rods:
2.2828-2.2834" (57.983-57.998 MM)
Main:
Main:
Comments:
DOHC, SFI, SIDEKICK SPORT * .25MM UNDERSIZE JOURNAL DIAM: 1.9580-1.9586"
437
J18

Make
Liter
CID
Vin
Model
Year
SUZUKI
SUZUKI
6 Cylinders
2.5
152
Stroke: 2.950" (75.000 MM)

1.9678-1.9685" (49.982-50.000 MM)
Rods:
2.5583-2.5590" (64.982-65.000 MM)
Main:
Main:
DOHC, MFI, GRAND VITARA JLX PLUS
Comments:
SUZUKI
2.7
TRUCK
99-02
H25
3.3071-3.3078" (84.000-84.020 MM)
Cyl Bore:
165
Stroke: 3.204" (81.382 MM)

1.9678-1.9685" (49.982-50.000 MM)
Rods:
2.5583-2.5590" (64.982-65.000 MM)
Main:
Main:
Comments:
MFI, DOHC, 24 VALVE
XL-7
01-02
H27
3.4638-3.4642" (87.980-87.990 MM)
Cyl Bore:
TECUMSEH
TECUMSEH
Engine Model
1 Cylinder
0.1
LAV25
LAV25
2.3125-2.3135" (58.738-58.763 MM)

Stroke: 1.844" (46.838 MM)
Cyl Bore:
.8610-.8615" (21.869-21.882 MM)
Rods:
.8735-.8740" (22.187-22.2 MM) *
Main:
.8755-.8760
Main:
Thrust Width:
LAV30,TVS75 B4 AUG 1987,H25,H30 1982&PRIOR,LEV80 * LEV80-CRANK JOURNAL DIAM #1=.9985-.9990",
Comments:
#2=.8735-.8740"
TECUMSEH
0.2
H30
H30
2.5000-2.5010" (63.5-63.525 MM)

Stroke: 1.844" (46.838 MM)
Cyl Bore:
.8610-.8615" (21.869-21.882 MM)
Rods:
1 .9985-.9990" (25.362-25.375 MM) *
Main 1:
2 .8735-.8740" (22.187-22.2 MM) *
.8755-.8760
Main:
Main 2:
Thrust Width:
Comments:
H30 1983 & UP, LAV35,H35 1982 & PRIOR,TVS90,OVRM40 * H35 & LAV35 HAVE SAME MAIN BRG DIAM
BOTH LOCATIONS .8735-.8740".
TECUMSEH
0.2
Stroke: 1.844" (46.838 MM)

.8610-.8615" (21.869-21.882 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Comments:
4 STROKE, AIR COOLED, OHV
TECUMSEH
0.2
OVRM40
10
OVRM40
2.500" (63.5 MM)
Cyl Bore:
ECV100
ECV100
2.6250-2.6260" (66.675-66.7 MM)

Stroke: 1.844" (46.838 MM)
Cyl Bore:
.8610-.8615" (21.869-21.882 MM)
Rods:
.8735-.8740" (22.187-22.2 MM) *
Main:
.8755-.8760
Main:
Thrust Width:
Comments:
TNT100, TVS100, ECV100, 4 STROKE, 4 HORSEPOWER * W/EXTERNAL IGNITION MAIN JOURN
DIAM=.9985-.9990 @ CRANKCASE SIDE,.8735-.8740 @ COVER (FLANGE) SIDE
TECUMSEH
0.2
10
Stroke: 1.938" (49.225 MM)

.9995-1.0000" (25.387-25.4 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Comments:
1983 & UP, 4 STROKE, 3.5 HORSEPOWER
TECUMSEH
0.2
H35
2.5000-2.5010" (63.5-63.525 MM)
Thrust Width:
1.0005-1.0010
10
LAV40
Stroke: 1.938" (49.225 MM)

Cyl Bore:
.9995-1.0000" (25.387-25.4 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Thrust Width:
Comments:
TVS105,HS40,TVXL105,ECV105,OVRM 50-56,4 HORSEPOWER
TECUMSEH
Stroke:
Rods:
Main:
Main:
0.2
10
1.8440" (46.838 MM)

.9995-1.0000" (25.837-25.400 MM)
.9985-.9990" (25.362-25.375 MM)
TECUMSEH
0.2
10
LAV40
1.0005-1.0010
438
LEV100
2.6250-2.6260" (66.675-66.700 MM)
OVRM50
Cyl Bore:
H35
2.625-2.626" (66.675-66.7 MM)
LEV100
Cyl Bore:
Stroke: 1.938" (49.225 MM)

.9995-1.0000" (25.387-25.4 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Comments:
& OVRM55, 4 STROKE, AIR COOLED, OHV
83-85
Cyl Bore:
2.625" (66.675 MM)
OVRM50

Make
Liter
CID
Vin
Model
Year
TECUMSEH
TECUMSEH
Stroke:
Rods:
Main:
Main:
1 Cylinder
0.2
11
0.2
11
0.2
TVS105
0.2
TVS115
11
0.2
V40
12
TECUMSEH
0.2
12
0.2
0.3
12
0.3
15
19
1.0005-1.0010
V50
LEV120
VH50,TVM125
2.625-2.626" (66.675-66.7 MM)
1.0005-1.0010
V70
Stroke: 2.532" (64.313 MM)

1.1860-1.1870" (30.124-30.15 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Comments:
VH70, VM70, H70, HH70, 4 STROKE, 7 HP
TECUMSEH
LAV50
2.812-2.813" (71.425-71.45 MM)
2.7950-2.7960" (70.993-71.018 MM)
Cyl Bore:
Stroke: 2.250" (57.15 MM)

Cyl Bore:
1.0615-1.0620" (26.962-26.975 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Thrust Width:
Comments:
VH50, TVM125, H50, HH50, 4 STROKE, 5 HORSEPOWER
TECUMSEH
1.0005-1.0010
LEV120
1.938" (49.230 MM)

.9995-1.0000" (25.837-25.400 MM)
.9985-.9990" (25.362-25.375 MM)
TECUMSEH
V40
2.5000-2.5010" (63.5-63.525 MM)
LAV50
Stroke: 1.938" (49.225 MM)

Cyl Bore:
.9995-1.0000" (25.387-25.4 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Thrust Width:
Comments:
TVS120, HS50, TNT120, ECV120,4 STROKE,5 HORSEPOWER
Stroke:
Rods:
Main:
Main:
TVS115
2.8120-2.8130" (71.425-71.450 MM)
Cyl Bore:
Stroke: 2.250" (57.15 MM)

Cyl Bore:
1.0615-1.0620" (26.962-26.975 MM)
Rods:
ALL .9985-.9990" (25.362-25.375 MM)
Main:
Main:
Thrust Width:
Comments:
& V40B, VH40, H40, HH40, 4 STROKE, 4 HORSEPOWER
TECUMSEH
TVS105
2.7950-2.7960" (70.993-71.018 MM)
Cyl Bore:
11
Stroke: 1.8440" (46.838 MM)

.8610-.8615" (21.869-21.882 MM)
Rods:
1 .9985-.9990" (25.362-25.375 MM)
Main 1:
2 .8735-.8740" (22.187-22.200 MM)
Main:
Main 2:
Comments:
ALSO TVXL115, 57000 SERIES ONLY
TECUMSEH
LEV115
2.7950-2.7960" (70.993-71.018 MM)
Cyl Bore:
Stroke: 1.8440" (46.838 MM)

.8610-.8615" (21.869-21.882 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Comments:
56000 SERIES, TVS115 & TVXL115 5700 A & LATER
TECUMSEH
(cont.)
LEV115
1.8440" (46.838 MM)

.9995-1.0000" (25.837-25.400 MM)
.9985-.9990" (25.362-25.375 MM)
TECUMSEH
Engine Model
V70,VH70,VM70
Cyl Bore:
2.750-2.751" (69.85-69.875 MM)
Thrust Width:
1.0005-1.0010
HH80
HH80
2.9375-2.9385" (74.613-74.638 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.3750-1.3755" (34.925-34.938 MM)
Rods:
1.1865-1.1870" (30.137-30.15 MM)
Main:
Main:
Comments:
BEFORE TYPE LETTER B, 4 STROKE, AIR COOLED, 8 HP * MAIN BRG PRELOAD IS .001-.007 FOR MODELS
W/TAPERROLLER BRG MAIN BRGS, DIFF THKNS SHIM GASKETS.
TECUMSEH
0.3
19
TVM195
TVM195
3.1250-3.1260" (79.375-79.400 MM)

Stroke: 2.532" (64.310 MM)
Cyl Bore:
1.1860-1.1870" (30.124-30.15 MM) *
Rods:
@ FLY .9985-.9990" (25.362-25.375 MM) *
Main 1:
@ PTO 1.1870-1.1875" (30.15-30.163 MM) *
1.1890-1.1895
Main:
Main 2:
Thrust Width:
Comments:
4 STROKE, 8 HP, TVM170 (F & UP) & HM70 (E & UP) * TVM195 (L & UP),TVM 170 (F & UP) & HM70 (E & UP):
ROD JOURNAL DIAMETER=1.3740-1.3745", CRANK JOURNAL DIAMETER=1.3745-1.3750"
439

Make
Liter
CID
Vin
Model
Year
TECUMSEH
TECUMSEH
1 Cylinder
0.3
19
Engine Model
(cont.)
V80
V80
3.062-3.063" (77.775-77.800 MM)

Stroke: 2.532" (64.313 MM)
Cyl Bore:
1.1860-1.1870" (30.124-30.15 MM)
Rods:
@ FLY .9985-.9990" (25.362-25.375 MM)
Main 1:
@ PTO 1.1870-1.1875" (30.15-30.163 MM)
1.0005-1.0010
Main 2:
Thrust Width:
H80, VM80 & HM80 B4 TYPE LETTER E,TVM195,HHM80,8HP ** WITH 3.125 BORE THRUST WIDTH IS
Comments:
1.1890-1.1895
TECUMSEH
0.3
19
VM70
VM70
3.062" (77.775 MM)

Stroke: 2.531" (64.287 MM)
Cyl Bore:
1.1865-1.1870" (30.137-30.15 MM)
Rods:
.9985-.9990" (25.362-25.375 MM)
Main:
Main:
Comments:
& HM70 PRIOR-TYPE LETTER A, 7 HP * MAIN BRG PRELOAD .001-.007 MODELS W/TAPER ROLLERBRG
MAIN BRGS, DIFF THKNS SHIM GASKETS.
TECUMSEH
0.3
19
VM80
Stroke: 2.531" (64.287 MM)

Cyl Bore:
1.1860-1.1870" (30.124-30.15 MM)
Rods:
@ FLY .9985-.9990" (25.362-25.375 MM)
Main 1:
@ PTO 1.1870-1.1875" (30.15-30.163 MM)
Main:
Main 2:
Thrust Width:
Comments:
TYPE LETTER E & AFTER, HM80 LETTER E & AFTER, 8 HP
TECUMSEH
0.3
21
0.4
22
0.4
22
0.4
OVM120
24
0.5
HH80
28
0.5
HH120
30
HH120
3.5000-3.5010" (88.9-88.925 MM)
OH180
Stroke: 2.875" (73.025 MM)

Cyl Bore:
1.3750-1.3755" (34.925-34.938 MM)
Rods:
1.1865-1.1870" (30.137-30.15 MM)
Main:
Main:
Comments:
4 STROKE, AIR COOLED, 18 HORSEPOWER * .001-.007 PRELOAD
OH180
3.625-3.626" (92.075-92.1 MM)
TOYOTA
TOYOTA
HH80
3.3120-3.3130" (84.125-84.15 MM)
Stroke: 2.875" (73.025 MM)

Cyl Bore:
1.3750-1.3755" (34.925-34.938 MM)
Rods:
1.1865-1.1870" (30.137-30.15 MM)
Main:
Main:
Comments:
GAS, HH120, OH150, OH160,HH150,HH160,12 HORSEPOWER
TECUMSEH
OVM120
3.310" (84.074 MM)
Stroke: 2.750" (69.85 MM)

Cyl Bore:
1.3750-1.3755" (34.925-34.938 MM)
Rods:
1.1865-1.1870" (30.137-30.15 MM)
Main:
Main:
Comments:
TYPE LETTER B & AFTER,HH100,VH80,VH100,OH140,HH140
TECUMSEH
HM100
3.312-3.313" (84.125-84.150 MM)
Cyl Bore:
Stroke: 2.530" (64.262 MM)

Cyl Bore:
1.3740-1.3745" (34.9-34.912 MM)
Rods:
1.3745-1.3750" (34.912-34.925 MM)
Main:
Main:
Comments:
GAS, OHV, 4 STROKE, AIR COOLED, 12 HORSEPOWER
TECUMSEH
OH120
3.125-3.126" (79.375-79.4 MM)
HM100
Stroke: 2.531" (64.287 MM)

1.1865-1.1870" (30.137-30.15 MM)
Rods:
@ FLY .9985-.9990" (25.362-25.375 MM)
Main 1:
@ PTO 1.1870-1.1875" (30.15-30.163 MM)
Main:
Main 2:
Comments:
LATE MODELS, 4 STROKE, 10 HORSEPOWER
TECUMSEH
1.1890-1.1895
OH120
Stroke: 2.750" (69.85 MM)

Cyl Bore:
1.3750-1.3755" (34.925-34.938 MM)
Rods:
1.1865-1.1870" (30.137-30.15 MM)
Main:
Main:
Comments:
4 STROKE, AIR COOLED, 346 CC, 12 HP * .001-.007 PRELOAD
TECUMSEH
VM80
3.125-3.126" (79.375-79.400 MM)
4 Cylinders
0.0
1DZ
1DZ
Cyl Bore:
1.9874-1.9882" (50.480-50.500 MM)

Rods:
2.5583-2.5591" (64.980-65.000 MM)
Main:
Main:
DIESEL
Comments:
440
1DZ
3.3858-3.3870" (86.000-83.030 MM)

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
1.2
71
3K-C
Stroke: 2.598" (65.989 MM)

1.6526-1.6535" (41.976-41.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
11, 26, 3K, 3KC, 9, L20, L3, R12, R14
Casting Numbers:
Comments:
Engine Model
COROLLA
(cont.)
70-79
3K-C
2.953" (75.006 MM)
Cyl Bore:
2BC, COROLLA
TOYOTA
1.3
79
4K-C
Stroke: 2.874" (73. MM)

1.6530-1.6535" (41.986-41.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
2BC, STARLETT
TOYOTA
1.3
79
4K-E
Stroke: 2.874" (73. MM)

1.6530-1.6535" (41.986-41.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
4K, 4K
Casting Numbers:
Comments:
EFI, STARLETT
TOYOTA
1.5
1.5
1.5
89
5E-FE
1.5
89
3A
TOYOTA
1.5
89
3A-C
441
5EFE
80-80
1A-C
3.051" (77.495 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
1.024 @ #3
80-86
3A
3.051" (77.495 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
1.024 @ #3
TERCEL
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
91-99
2.9134-2.9146" (74. TO 74.031 MM)

.062" (1.575 MM)
.062" (1.575 MM)
.868" @ #3
TERCEL
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.031" (76.987 MM)

1.5740-1.5748" (39.98-40. MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
1.259" (31.979 MM)
2.756" (70.002 MM)
Rear Seal Diameter:
1A, 1K, 3A, 3AC, 4A, 4AC, 4AL
Casting Numbers:
Comments:
OHC, 2BC, TERCEL
3P
3.014" (76.556 MM)
TERCEL
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 3.031" (76.987 MM)

1.5740-1.5748" (39.98-40. MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
2.756" (70.002 MM)
Rear Seal Diameter:
3A, 3AC, 4A, 4AC, 4AL
Casting Numbers:
Comments:
OHC, 2BC, TERCEL
4K-E
@ #3
COROLLA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
1A-C
Stroke: 3.031" (76.987 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
#1 1.8892-1.8898" (47.986-48.001 MM)
Main:
Main:
1.259" (31.979 MM)
2.756" (70.002 MM)
Rear Seal Diameter:
1A, 1K, 3A
Casting Numbers:
Comments:
2BC, TERCEL
TOYOTA
83-84
3P
Cyl Bore:
89
4K-C
2.953" (75.006 MM)
Thrust Width:
Stroke: 3.429" (87.097 MM)

1.6923-1.6929" (42.984 TO 43. MM)
Rods:
1.9679-1.9685" (49.985 TO 50. MM)
Main:
Main:
1.377" (34.976 MM)
3.150" (80.010 MM)
Rear Seal Diameter:
Comments:
DOHC, 1497 CC, 16 VALVE, EFI, PASEO, TERCEL
TOYOTA
STARLETT
89
81-82
2.953" (75.006 MM)
Cyl Bore:
Stroke: 3.110" (78.994 MM)

1.8495-1.8505" (46.977-47.003 MM)
Rods:
2.0465-2.0475" (51.981-52.007 MM)
Main:
Main:
23010
Casting Numbers:
Comments:
GAS, FORKLIFT
TOYOTA
STARLETT
Cyl Bore:
81-88
3.051" (77.495 MM)

.063" ROLLED (1.6 MM)
.063" ROLLED (1.600 MM)
@ #3
3A-C

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
1.5
89
3E
Stroke: 3.430" (87.122 MM)

1.6923-1.6929" (42.984-43. MM)
Rods:
#1 1.9678-1.9685" (49.982-50. MM)
Main:
Main:
Balance: Internal
3.151" (80.035 MM)
Rear Seal Diameter:
3E
Casting Numbers:
Comments:
TERCEL
Engine Model
(cont.)
87-90
3E
2.8740-2.8752" (73.-73.03 MM)
Cyl Bore:
@ #3
Thrust Width:
2BC, TERCEL, 12 VALVE HEAD
TOYOTA
1.5
89
3E-E
TERCEL
Stroke: 3.425" (86.995 MM)

Cyl Bore:
1.6923-1.6929" (42.984-43. MM)
Rods:
#1 1.9679-1.9685" (49.985-50. MM)
Main:
Main:
Thrust Width:
Balance: Internal
1.378" (35.001 MM)
3.151"3.151" (80.035 MM)
Rear Seal Diameter:
3E
Casting Numbers:
Comments:
EFI, 3E-FE, TERCEL, 12 VALVE HEAD THRUST BRG LENGTH STD .098
TOYOTA
1.5
91
1.5
91
1.5
91
1.5
1.6
3.0157-3.0165" (76.599-76.619 MM)
Thrust Width:
1.3745
Cyl Bore:
3.0709" (78.001 MM)
64-71
STARLETT
ECHO
97
Cyl Bore:
4A-FE
84-85
5K-E
@ #3
Thrust Width:
92
2R
3.1693" (80.5 MM)
Cyl Bore:
Stroke: 3.3346" (84.700 MM)

1.5745-1.5748" (39.992-40.000 MM)
Rods:
1.8110-1.8115" (46.000-46.012 MM)
Main:
Main:
Comments:
DOHC, 16 VALVE, MFI, ECHO & PIRUS
TOYOTA
4P
Cyl Bore:
5K-E
Stroke: 2.874" (73. MM)

1.6530-1.6535" (41.986-41.999 MM)
Rods:
1.9675-1.9685" (49.975-50. MM)
Main:
Main:
Comments:
EFI, STARLETT
TOYOTA
@ #3
2R
Stroke: 3.071" (78.003 MM)

1.9681-1.9688" (49.99-50.008 MM)
Rods:
#1 2.2826-2.2834" (57.978-57.998 MM)
Main:
Main:
Comments:
LPG FORKLIFT
TOYOTA
3E-E
4P
Stroke: 3.188" (80.975 MM)

1.8490-1.8500" (46.965-46.99 MM)
Rods:
2.0470-2.0480" (51.994-52.019 MM)
Main:
Main:
96001
Casting Numbers:
Comments:
FORKLIFT & INDUSTRIAL 4P
TOYOTA
90-94
2.874" (73. MM)
01-05
1NZFXE
2.9526-2.9533" (75.000-75.013 MM)
CELICA
88-96
4A-FE
3.1890-3.1902" (81.001-81.031 MM)

Stroke: 3.032" (77.013 MM)
Cyl Bore:
1.5742-1.5748" (39.985-40. MM)
.078" (1.981 MM)
Rods:
Rod Fillet:
1.8890-1.8898" (47.981-48.001 MM)
.078" (1.981 MM)
Main:
Main Fillet:
1.024 @ #3
Main:
Thrust Width:
Balance: Internal
2.756" (70.002 MM)
Rear Seal Diameter:
5A
Casting Numbers:
Comments:
DOHC, MPFI, COROLLA, CELICA, 16 VALVE THRUST WASHER THCKNS .0961-.0980
TOYOTA
1.6
97
CELICA
93-98
4A-FE
3.189" (81.001 MM)

Stroke: 3.032" (77.013 MM)
Cyl Bore:
1.5742-1.5748" (39.985-40. MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Comments:
DOHC, MPFI, COROLLA, CELICA, 16 VALVE THRUST WASHER THCKNS .0961-.0980
TOYOTA
1.6
Stroke: 2.756" (70.002 MM)

1.8890-1.8898" (47.981-48.001 MM)
Rods:
2.2825-2.2835" (57.976-58.001 MM)
Main:
Main:
2T, 5G9-37, G46, G9-37
Casting Numbers:
Comments:
2BC, OHV, COROLLA
97
2T-C
COROLLA
Cyl Bore:
442
71-79
3.346" (84.988 MM)
2T-C

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
1.6
97
4A-C
Stroke: 3.032" (77.013 MM)

1.5740-1.5748" (39.98-40. MM)
Rods:
#1 1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
1K, 3A, 4A, 4AC
Casting Numbers:
Comments:
COROLLA
Engine Model
(cont.)
83-87
4A-C
3.189" (81.001 MM)
Cyl Bore:
Thrust Width:
@ CENTER
2BC, COROLLA, 8 VALVE
TOYOTA
1.6
97
4AGEC
Stroke: 3.032" (77.013 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Comments:
MFI, DOHC, COROLLA GTS, MR2
TOYOTA
1.6
97
4A-LC
1.6
4A-F
TOYOTA
1.6
4AGEL
TOYOTA
1.6
97
4A-GE
TOYOTA
1.6
97
TOYOTA
1.8
108
MR2
1.8
108
3.189" (81.001 MM)
Cyl Bore:
3.189" (81.001 MM)
88-89
1ZZFE
COROLLA
3T-C
Stroke: 3.071" (78.003 MM)

1.8888-1.8894" (47.976-47.991 MM)
Rods:
2.2824-2.2831" (57.973-57.991 MM)
Main:
Main:
Comments:
OHV, 2BC, COROLLA
TOYOTA
1.8
7AFE
98-06
4A-GE
4AGZE
1ZZFE
80-82
3T-C
3.346" (84.988 MM)
COROLLA
Stroke: 3.3661" (85.499 MM)

Cyl Bore:
1.8893-1.8898" (47.988-48.001 MM)
Rods:
1.8891-1.8898" (47.983-48.001 MM)
Main:
Main:
Thrust Width:
Balance: Internal
Comments:
DOHC, MPFI, COROLLA, HIGH RAIL INTAKE RUNNERS
443
4A-GELC
3.1102" (78.999 MM)
COROLLA
Cyl Bore:
109
88-89
Cyl Bore:
Stroke: 3.6024" (91.501 MM)

Cyl Bore:
1.7320-1.7323" (43.993-44. MM)
Rods:
1.8892-1.8898" (47.986-48.001 MM)
Main:
Main:
Comments:
SFI,COROLLA, CELICA, 79MM/91.5MM B/S, SMALLER ROD
TOYOTA
85-89
3.1890-3.1902" (81.001-81.031 MM)
4AGZE
Stroke: 3.032" (77.013 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Comments:
MFI SUPER CHARGED
4A-F
@ #3
MR2
Cyl Bore:
Stroke: 3.032" (77.013 MM)

1.6529-1.6535" (41.984-41.999 MM)
Rods:
1.8892-1.8898" (47.986-48.001 MM)
Main:
Main:
Comments:
DOHC, MPFI, MR2, 16 VALVE
88-89
3.1890-3.1902" (81.001-81.031 MM)
Thrust Width:
97
4A-LC
@ CENTER
COROLLA
Cyl Bore:
Stroke: 3.032" (77.013 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Comments:
SUPER CHARGED MR2, VIN 4A-GELC, MFI,
87-88
3.189" (81.001 MM)
Thrust Width:
97
4AGEC
@ #3
COROLLA
Cyl Bore:
Stroke: 3.032" (77.013 MM)

1.5742-1.5748" (39.985-40. MM)
Rods:
1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
Comments:
DOHC, 2BC, COROLLA
85-87
3.189" (81.001 MM)
Thrust Width:
Stroke: 3.032" (77.013 MM)

1.5740-1.5748" (39.98-40. MM)
Rods:
#1 1.8890-1.8898" (47.981-48.001 MM)
Main:
Main:
3-S, 4A, 4AC
Casting Numbers:
Comments:
2BC, COROLLA FX, 8 VALVE
TOYOTA
COROLLA
Cyl Bore:
93-97
7AFE
3.1890-3.1902" (81.001-81.031 MM)
@ #3

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
1.8
110
2ZZGE
CELICA
Stroke: 3.3464" (85.000 MM)

Cyl Bore:
1.7713-1.7717" (44.992-45.000 MM)
Rods:
1.8892-1.8898" (47.988-48.000 MM)
Main:
Main:
MFI, DOHC,CELICA,82MM BORE,85MM STROKE, LARGER ROD
Comments:
TOYOTA
1.8
112
1CTLC
Stroke: 3.346" (84.988 MM)

1.9874-1.9880" (50.48-50.495 MM)
Rods:
2.2437-2.2443" (56.99-57.005 MM)
Main:
Main:
Comments:
TURBO DIESEL, CAMRY
TOYOTA
1.8
TOYOTA
1.9
1C-LC
1.9
2.0
120
2.0
2.0
2.0
TOYOTA
2.0
66-69
3.464" (87.986 MM)
Cyl Bore:
3.386" (86.004 MM)
Thrust Width:
1.423
CAMRY
18R-C
CELICA
122
2CTLC
71-74
18R-C
3.4842" (88.499 MM)
5R
122
5R
3.464" (87.986 MM)
Cyl Bore:
5R
2SELC
5R
3.4646-3.4657" (88.001-88.029 MM)
Cyl Bore:
122
86
8R
3.386" (86.004 MM)
Cyl Bore:
Stroke: 3.230" (82.042 MM)

2.1638-2.1650" (54.961-54.991 MM)
Rods:
2.3610-2.3622" (59.969-60. MM)
Main:
Main:
Comments:
SQUARE PORT CYL HEAD EARLY
Stroke: 3.543" (89.992 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
Comments:
SOHC, EFI, CAMRY, CELICA
@ #2
CROWN
2CTLC
Stroke: 3.230" (82.042 MM)

2.1648-2.1653" (54.986-54.999 MM)
Rods:
2.3616-2.3622" (59.985-60. MM)
Main:
Main:
Comments:
ROUND PORT CYL HEAD LATE
TOYOTA
1C-LC
69-71
Stroke: 3.1496" (80. MM)

2.0857-2.0866" (52.977-53. MM)
Rods:
#1 2.3613-2.3622" (59.977-60. MM)
Main:
Main:
18R, 18RC, 41-R, C-1-K, G-1-U, L-1-M
Casting Numbers:
Comments:
2BC, OHC, CELICA, CORONA
TOYOTA
84-85
Cyl Bore:
Cyl Bore:
120
1CTLC
3.268" (83.007 MM)
113
Stroke: 3.346" (84.988 MM)

1.9874-1.9880" (50.48-50.495 MM)
Rods:
2.2437-2.2443" (56.99-57.005 MM)
Main:
Main:
Comments:
TURBO DIESEL
TOYOTA
COROLLA
Stroke: 3.150" (80.01 MM)

2.0857-2.0866" (52.977-53. MM)
Rods:
#1 2.3613-2.3622" (59.977-60. MM)
Main:
Main:
11, 12, MFF
Casting Numbers:
Comments:
OHC, 8R, 8RC, 18RC, 1897CC
TOYOTA
84-85
@ #2
Thrust Width:
113
2ZZGE
3.268" (83.007 MM)
Cyl Bore:
Stroke: 3.071" (78.003 MM)

2.1648-2.1654" (54.986-55.001 MM)
Rods:
2.3616-2.3622" (59.985-60. MM)
Main:
Main:
1B, 1Z, 3R, 3RC, 4-1-R, C-LK, JG, L-1M
Casting Numbers:
Comments:
3RC, OHV, CROWN
TOYOTA
CAMRY
Thrust Width:
112
(cont.)
3.2283-3.2289" (82.000-82.013 MM)
Cyl Bore:
Stroke: 3.346" (84.988 MM)

1.9874-1.9882" (50.48-50.5 MM)
Rods:
2.2433-2.2441" (56.98-57. MM)
Main:
Main:
Comments:
DIESEL, COROLLA
00-03
Engine Model
CAMRY
Cyl Bore:
Thrust Width:
444
83-86
3.307" (83.998 MM)
@ #3
2SELC

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
2.0
122
3SFE
Stroke: 3.390" (86.106 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
#1 2.1649-2.1655" (54.988-55.004 MM)
Main:
Main:
Balance: Internal
1.6535" (41.999 MM)
3.1496" (80. MM)
Rear Seal Diameter:
3SF
Casting Numbers:
Comments:
CAMRY
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Engine Model
(cont.)
86-91
3SFE
3.3858-3.3870" (85.999-86.03 MM)

.047-.063" (1.194-1.6 MM)
.047-.063" (1.194-1.600 MM)
1.630 @ #3
DOHC, MPFI, CELICA, CAMRY
TOYOTA
2.0
122
3SGEL
CELICA
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
Thrust Width:
4B
Casting Numbers:
Comments:
DOHC, VIN 3S-GELC, MPFI, CELICA * CENTER MAIN = .0011-.0019"
TOYOTA
2.0
122
3SGEL
Stroke: 3.386" (86.004 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
Comments:
DOHC, 3S-GELC, MPFI, CELICA
TOYOTA
2.0
3SGTE
TOYOTA
2.0
122
2.0
122
3S-GELC
@ #3
CELICA
90-95
Cyl Bore:
3.3858-3.3870" (85.999-86.03 MM)
Cyl Bore:
3.386" (86.004 MM)
3SGTE
Stroke: 3.386" (86.004 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.1648-2.1653" (54.986-54.999 MM)
Main:
Main:
3.347" (85.014 MM)
Rear Seal Diameter:
Comments:
DOHC, 3S-GTE, MPFI, TURBO 8 BOLT FLANGE
TOYOTA
87-89
3.386" (86.004 MM)
Thrust Width:
122
3S-GELC
@ #3
CELICA
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
Comments:
MFI, TURBO, CELICA ALL TRAC (4WD), MR2
86-89
3.3071-3.3073" (84.-84.005 MM)
87-89
3SGTE
@ #3
Thrust Width:
1AZFE
3SGTE
RAV4
01-03
1AZFE
3.3858-3.3863" (86.000-86.013 MM)

Stroke: 3.387" (86.030 MM)
Cyl Bore:
1.8894-1.8898" (47.990-48.000 MM)
Rods:
2.1649-2.1654" (54.988-55.000 MM)
Main:
@ #3
Main:
Thrust Width:
Comments:
DOHC, MPI, RAV4 THRUST WASHER THICKNESS .076-.078" (1.930-1.960 MM)
TOYOTA
2.0
122
3S-FE
Stroke: 3.390" (86.106 MM)

2.0466-2.0472 *" (51.984-51.999 MM)
Rods:
2.1649-2.1655 *" (54.988-55.004 MM)
Main:
Main:
Comments:
DOHC, SFI, RAV4 * .010 UNDERSIZE AVLBL
TOYOTA
2.0
122
3Y-EC
Stroke: 3.386" (86.004 MM)

1.8890-1.8898" (47.981-48.001 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
2Y, 3Y, Z21
Casting Numbers:
Comments:
EFI, OHV, VAN
TOYOTA
2.2
Stroke: 3.583" (91.008 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
1.654" (42.012 MM)
3.347" (85.014 MM)
Rear Seal Diameter:
13111-03010-D
Casting Numbers:
Comments:
DOHC, MPFI, MR2, CAMRY, CELICA
RAV4
96-00
VAN
84-85
@ #3
Thrust Width:
5SFE
CAMRY
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
445
3Y-EC
3.386" (86.004 MM)
Cyl Bore:
134
3S-FE
3.390" (86.106 MM)
Cyl Bore:
90-00
3.4252-3.4264" (87.-87.031 MM)

.062" (1/16)
.062" (1/16)
1.161" @ #3
5SFE

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
2.2
134
20R
Stroke: 3.504" (89.002 MM)

2.0857-2.0866" (52.977-53. MM)
Rods:
#1 2.3613-2.3622" (59.977-60. MM)
Main:
Main:
L1, N, S2
Casting Numbers:
Comments:
75-77
20R
2BC, OHC, CELICA, CORONA
TOYOTA
2.2
134
20R
TOYOTA
2.2
134
TOYOTA
2.2
2.2
2.4
2.4
144
144
2.4
3.500" (88.9 MM)

2.0857-2.0866" (52.977-53. MM)
144
4Y-EC
@ #3
4-RUNNER
85-87
22R-TEC
3.6220-3.6224" (91.999-92.009 MM)
Cyl Bore:
@ CENTER
Thrust Width:
4-RUNNER
89-95
22R-E
Cyl Bore:
3.6220-3.6224" (91.999-92.009 MM)
Rod Width:
1.1100" (28.194 MM)
Thrust Width:
1.187" @ #3
2AZFE
Stroke: 3.800" (96.520 MM)

1.8893-1.8897" (47.988-47.998 MM)
Rods:
2.1648-2.1653" (54.985-54.998 MM)
Main:
Main:
Balance: Internal
Comments:
MFI, DOHC, CAMRY LE, SEDAN
TOYOTA
84-89
3.582" (90.983 MM)
Thrust Width:
22R-E
4Y
@ #3
VAN
Cyl Bore:
22R-T
2.3613-2.3622" (59.977-60.000 MM)

Main:
Main:
Balance: Internal
3.1500" (80.010 MM)
Rear Seal Diameter:
651
Casting Numbers:
Comments:
MFI, EFI, P/UP, 4-RUNNER
2.4
89-95
3.5827-3.5839" (91.001-91.031 MM)
4Y-EC
3.500" (88.900 MM)

2.0861-2.0866" (52.988-53.000 MM)
TOYOTA
@ #3
Thrust Width:
144
20R
81-83
4Y
Stroke: 3.500" (88.9 MM)

2.0857-2.0866" (52.977-53. MM)
Rods:
2.3613-2.3622" (59.977-60. MM)
Main:
Main:
C1
Casting Numbers:
Comments:
22R-TEC, EFI, TURBO P/UP, 4-RUNNER
TOYOTA
3.543" (89.992 MM)
Cyl Bore:
Stroke: 3.386" (86.004 MM)

1.8890-1.8898" (47.981-48.001 MM)
Rods:
2.2827-2.2835" (57.981-58.001 MM)
Main:
Main:
Comments:
OHV, MPFI, VAN *T/W THICKNESS .096-.098 STD
TOYOTA
Cyl Bore:
137
137
78-80
3.480" (88.392 MM)
Thrust Width:
Stroke: 3.386" (86.004 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.2829-2.2835" (57.986-58.001 MM)
Main:
Main:
Comments:
OHV, GAS, FORKLIFT
TOYOTA
CELICA
Cyl Bore:
Stroke: 3.386" (86.004 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.4400-2.4409" (61.976-61.999 MM)
Main:
Main:
Comments:
OHC DIESEL
Stroke:
Rods:
(cont.)
3.480" (88.392 MM)
Cyl Bore:
Stroke: 3.504" (89.002 MM)

2.0857-2.0866" (52.977-53. MM)
Rods:
#1 2.3613-2.3622" (59.977-60. MM)
Main:
Main:
L1, N, S2
Casting Numbers:
Comments:
2BC, CELICA, P/UP, CORONA
Stroke:
Rods:
CELICA
Engine Model
CAMRY
02-06
2AZ-FE
Cyl Bore:
3.4843-3.4851" (88.501-88.521 MM)
Cyl Bore:
3.6220-3.6224" (91.999-92.009 MM)
22R
81-84
Rod Width:
2.3613-2.3622" (59.977-60. MM)
Main:
Main:
Thrust Width:
Balance: Internal
5 E, L1, L1, N, N
Casting Numbers:
Comments:
2BC TALL DECK * THERE ARE TWO WIDTHS: 1.100 & 1.185
.1083 OR .077
446
1.110" (28.194 MM)

1.185 @ #3 *
THRUST BRG LENGTH
22R

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
2.4
144
22REC
Stroke: 3.500" (88.9 MM)

2.0857-2.0866" (52.977-53. MM)
Rods:
2.3613-2.3622" (59.977-60. MM)
Main:
Main:
MFI, SHORT DECK
Comments:
TOYOTA
2.4
146
TOYOTA
2.4
148
(cont.)
85-88
22REC
Cyl Bore:
3.6220-3.6224" (91.999-92.009 MM)
Thrust Width:
1.187 @ CENTER
2TZFE
Stroke: 3.500" (88.9 MM)

2.0861-2.0866" (52.987-53. MM)
Rods:
OTHRS 2.3617-2.3622" (59.987-60. MM)
Main 1:
#3 2.3615-2.3620" (59.982-59.995 MM)
Main:
Main 2:
1.889" (48.000 MM)
Rear Seal Diameter:
Comments:
SUPERCHARGED, MFI & 2TZ-FZE, PREVIA VAN
Engine Model
PREVIA
91-97
2TZ-FE
Cyl Bore:
3.6220-3.6224" (91.999-92.009 MM)
Thrust Width:
1.173" (29.800 MM)
TACOMA
96-04
2RZ-FE
3.7398-3.7403" (94.991-95.004 MM)

Stroke: 3.390" (86.106 MM)
Cyl Bore:
2.0861-2.0866" (52.987-53. MM)
Rods:
#3 2.3615-2.3620" (59.982-59.995 MM)
Main 1:
OTHRS 2.3617-2.3622" (59.987-60.000 MM)
Main:
Main 2:
Comments:
DOHC, MPI, TACOMA, 2 WHEEL DRIVE * OIL CLEAR ALL OTHER JOURNALS: .0009-.0019
TOYOTA
2.4
150
2L
Stroke: 3.500" (88.9 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.4400-2.4409" (61.976-61.999 MM)
Main:
Main:
Comments:
DIESEL, P/UP
TOYOTA
2.4
150
2LT
2.5
2J
TOYOTA
2.7
2LT
@ #3
2J
69-72
2J
3.465" (88.011 MM)
Cyl Bore:
165
85-87
3.6220-3.6224" (91.999-92.009 MM)
Thrust Width:
151
2L
@ #3
PICKUP
Cyl Bore:
Stroke: 4.016" (102.006 MM)

2.1650-2.1657" (54.991-55.009 MM)
Rods:
2.7553-2.7559" (69.985-70. MM)
Main:
Main:
Comments:
DIESEL FORKLIFT
84-87
3.6220-3.6224" (91.999-92.009 MM)
Thrust Width:
Stroke: 3.500" (88.9 MM)

2.0858-2.0866" (52.979-53. MM)
Rods:
2.4402-2.4409" (61.981-61.999 MM)
Main:
Main:
Comments:
TURBO DIESEL P/UP
TOYOTA
PICKUP
Cyl Bore:
T100
94-00
3RZFE
3.7398-3.7403" (94.991-95.004 MM)

Stroke: 3.736" (94.894 MM)
Cyl Bore:
2.0861-2.0866" (52.987-53. MM)
Rods:
#3 2.3615-2.3620" (59.982-59.995 MM)
Main 1:
OTHRS 2.3617-2.3622" (59.987-60. MM)
Main:
Main 2:
Comments:
T100 PICKUP, 4 RUNNER * OIL CLEAR ALL OTHER JOURNALS: .0009-.0019
TOYOTA
2.7
165
2TRFE
TACOMA
05-06
2TR-FE
3.7398-3.7403" (94.990-95.003 MM)
Cyl Bore:
2.0862-2.0867" (52.989-53.002 MM)

Rods:
OTHERS 2.3619-2.3622" (59.987-60.000 MM)
Main 1:
#3 2.3615-2.3620" (59.981-59.994 MM)
Main:
Main 2:
Comments:
TACOMA
TOYOTA
Stroke:
Rods:
Main:
Main:
2.8
169
5P
4.016" (102.006 MM)

2.165" (54.991 MM)
2.755" (69.977 MM)
TOYOTA
2.9
180
5FD25
5P
3.660" (92.964 MM)
Cyl Bore:
1Z
Stroke: 4.020" (102.108 MM)

Cyl Bore:
2.1646-2.1654" (54.981-55.001 MM)
Rods:
2.9126-2.9134" (73.98-74. MM)
Main:
Main:
Comments:
OHV, DIESEL FORKLIFT, DIR INJ THRUST WASHER THKNS .096-.098
447
5FD25
3.779-3.781" (95.987-96.037 MM)

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
4 Cylinders
3.0
182
5L
Stroke: 3.780" (96.000 MM)

2.1649-2.1654" (54.988-55.000 MM)
Rods:
2.4403-2.4409" (61.985-62.000 MM)
Main:
Main:
DIESEL
Comments:
TOYOTA
3.0
1KZTE
(cont.)
97-04
5L
3.9173-3.9185" (99.500-99.530 MM)
Cyl Bore:
183
Engine Model
1KZTE
1KZTE
3.7795-3.7807" (96.000-93.060 MM)
Cyl Bore:
2.3221-2.3228" (58.982-59.000 MM)

Rods:
2.7552-2.7559" (69.982-70.000 MM)
Main:
Main:
Comments:
DIESEL
TOYOTA
3.4
209
3B
Stroke: 4.134" (105.004 MM)

2.4016-2.4026" (61.000-61.026 MM)
Rods:
2.7551-2.7559" (69.980-70.000 MM)
Main:
Main:
Comments:
DIESEL
TOYOTA
3.8
223
14B
Stroke: 4.409" (112.000 MM)

2.4008-2.4018" (60.980-61.000 MM)
Rods:
2.7551-2.7559" (69.980-70.000 MM)
Main:
Main:
Comments:
DIESEL
TOYOTA
4.1
81-90
3B
4.016-4.017" (102.006-102.032 MM)
Cyl Bore:
14B
4.0157-4.0169" (102.000-102.030 MM)
Cyl Bore:
250
15B-F
94-95
15B-F
4.2500-4.2527" (107.950-108.020 MM)
Cyl Bore:
2.4008-2.4016" (60.980-61.000 MM)

Rods:
2.7551-2.7559" (69.979-69.999 MM)
Main 1:
#3 2.7539-2.7547" (69.949-69.970 MM)
Main:
Main 2:
Comments:
NON TURBO DIESEL
TOYOTA
TOYOTA
6 Cylinders
2.3
137
2M
Stroke: 3.350" (85.09 MM)

2.0465-2.0472" (51.981-51.999 MM)
Rods:
#1 2.3616-2.3622" (59.985-60. MM)
Main:
Main:
2M, 2MG2
Casting Numbers:
Comments:
CROWN
68-72
2M
2.953" (75.006 MM)
Cyl Bore:
SOHC, CROWN
TOYOTA
2.5
153
2VZFE
Stroke: 2.740" (69.596 MM)

1.8892-1.8898" (47.986-48.001 MM)
Rods:
1 2.5191-2.5197" (63.985-64. MM)
Main:
Main:
Balance: Internal
1.575" (40.005 MM)
3.624" (92.05 MM)
Rear Seal Diameter:
Comments:
DOHC, MPI, CAMRY FOUR FLATS FOR OIL PUMP
TOYOTA
2.6
156
TOYOTA
2.6
Thrust Width:
1.015 @ #2
2VZFE
THRUST WASHER .098
CRESSIDA
Cyl Bore:
Thrust Width:
156
88-92
3.4449-3.4461" (87.5-87.531 MM)
4M-E
Stroke: 3.346" (84.988 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
2M, 2MG2
Casting Numbers:
Comments:
SOHC, EFI, SUPRA, CRESSIDA
Stroke: 3.346" (84.988 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
2M, 2MG2, 4M
Casting Numbers:
Comments:
SOHC, 2BBL
CAMRY
Cyl Bore:
4M
79-80
@ #4
73-79
Cyl Bore:
448
4M-E
3.150" (80.01 MM)
3.150" (80.01 MM)
4M

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
6 Cylinders
2.8
168
5MGE
Stroke: 3.350" (85.09 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3623-2.3631" (60.002-60.023 MM)
Main:
Main:
5ME
Casting Numbers:
Comments:
CELICA
Engine Model
(cont.)
82-88
5MGE
3.2677" (83. MM)
Cyl Bore:
@ #4
Thrust Width:
DOHC, CELICA, CRESSIDA T/W THCKNESS .1152-.1171
TOYOTA
2.8
168
5M-E
Stroke: 3.346" (84.988 MM)

2.0466-2.0472" (51.984-51.999 MM)
Rods:
2.3610-2.3618" (59.969-59.99 MM)
Main:
Main:
Comments:
SOHC, EFI, SUPRA, CRESSIDA
TOYOTA
3.0
CRESSIDA
180
3V-ZE
81-82
5M-E
3.268" (83.007 MM)
Cyl Bore:
4-RUNNER
88-95
3V-ZE
3.4449-3.4461" (87.5-87.531 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
2.1648-2.1654" (54.986-55.001 MM)
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
2.5191-2.5197" (63.985-64. MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.025 @ #2
Main:
Thrust Width:
1.575" (40.005 MM)
3.618-3.620" (91.897-91.948 MM)
Rear Seal Diameter:
F0011, F1111
Casting Numbers:
Comments:
SOHC, MFI, 4-RUNNER OS/FLG BRG AVBL,FLYWHEEL BOLTS OPEN-CRANKCASE, SNOUT LENGTH IS
2.750"
TOYOTA
3.0
180
3VZFE
CAMRY
92-93
3VZ-FE
3.4449-3.4461" (87.5-87.531 MM)

Stroke: 3.228" (81.991 MM)
Cyl Bore:
2.1648-2.1654" (54.986-55.001 MM)
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
#1 2.5191-2.5197" (63.985-64. MM)
.078" ROLLED (1.981 MM)
Main:
Main Fillet:
1.025 @ #2
Main:
Thrust Width:
1.575" (40.005 MM)
3.662" (93.015 MM)
Rear Seal Diameter:
Comments:
DOHC, MFI, CAMRY O/S FLG BRG AVBL,FLYWHEEL BOLTS OPEN-CRANKCASE, SNOUT LENGTH IS 2.500"
TOYOTA
3.0
180
7M-GE
Stroke: 3.583" (91.008 MM)

2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.3620-2.3627" (59.995-60.013 MM)
Main:
Main:
6M, 7M
Casting Numbers:
Comments:
DOHC, MFI, SUPRA/CRESSIDA, 24 VALVE
TOYOTA
3.0
180
3.0
183
TOYOTA
3.0
.1152-.1171" @ #4
CRESSIDA
TOYOTA
3.3
202
7MGTE
3.2673-3.2693" (82.989-83.040 MM)
Thrust Width:
.1152-.1171 @ #4
AVALON
2JZGE
3MZFE
449
1MZFE
93-98
2JZ-GE
3.3858-3.3863" (85.999-86.012 MM)
SOLARA
Cyl Bore:
94-02
3.4449-3.4453" (87.5-87.511 MM)
SUPRA
Stroke: 3.3898" (86.101 MM)

Cyl Bore:
2.0465-2.0472" (51.981-51.999 MM)
Rods:
2.4403-2.4409" (61.984-61.999 MM)
Main:
Main:
Comments:
DOHC, SUPRA, 2JZ-GTE TURBO & 2JZ-GE NON TURBO
Stroke: 3.2677" (83.000 MM)

2.0863-2.0866" (52.992-53.000 MM)
Rods:
2.4011-2.4016" (60.988-61.000 MM)
Main:
Main:
Comments:
DOHC, HIGHLANDER TOO
87-92
Cyl Bore:
Cyl Bore:
183
7M-GE
Thrust Width:
1MZFE
Stroke: 3.2677" (83. MM)

2.0864-2.0866" (52.995-53. MM)
Rods:
2.4011-2.4016" (60.988-61.001 MM)
Main:
Main:
B7
Casting Numbers:
Comments:
DOHC, CAMRY, AVALON, SIENNA
86-92
3.2673-3.2693" (82.989-83.04 MM)
7MGTE
Stroke: 3.583" (91.008 MM)

2.0463-2.0472" (51.976-51.999 MM)
Rods:
2.3620-2.3627" (59.995-60.013 MM)
Main:
Main:
7M
Casting Numbers:
Comments:
DOHC, TURBO, MPFI, SUPRA/CRESSIDA, 24 VALVE
TOYOTA
CRESSIDA
Cyl Bore:
04-05
3MZ-FE
3.6220-3.6272" (92.000-92.132 MM)

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
6 Cylinders
3.4
207
Stroke: 3.7402" (95.001 MM)

2.1648-2.1654" (54.986-55.001 MM) *
Rods:
2.5191-2.5197" (63.985-64. MM)
Main:
Main:
1.5752" (40.010 MM)
3.6225" (92.012 MM)
Rear Seal Diameter:
DOHC, MPI, PICK UP * .010" UNDERSIZE AVAILABLE.
Comments:
TOYOTA
Engine Model
3.4
207
5VZFE
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
95-99
5VZFE
3.6811" (93.5 MM)

.078" ROLLED (1.981 MM)
.078" ROLLED (1.981 MM)
1.0267" @ #2
TACOMA
95-04
5VZFE
3.6811" (93.500 MM)

Stroke: 3.7402" (95.001 MM)
Cyl Bore:
2.1648-2.1654" (54.986-55.001 MM) *
.078" ROLLED (1.981 MM)
Rods:
Rod Fillet:
2.5191-2.5197" (63.985-64. MM) *
.078 ROLLED (1.981 MM)
Main:
Main Fillet:
1.0267 @ #2
Main:
Thrust Width:
1.5752" (40.01 MM)
3.6225" (92.012 MM)
Rear Seal Diameter:
Comments:
TACOMA, SFI, * .010 UNDERSIZE AVLBL. THRUST WASHER THICKNESS .096-.098"
TOYOTA
3.5
214
2GRFE
Stroke: 3.315" (84.200) REPORTED

2.0863-2.0866" (52.992-53.000 MM)
Rods:
2.4001-2.4016" (60.988-61.000 MM)
Main:
Main:
Comments:
AVALON
TOYOTA
3.6
218
3.9
Stroke: 4.000" (101.6 MM)

2.1252-2.1260" (53.98-54. MM)
Rods:
#1 2.6369-2.6378" (66.977-67. MM)
Main 1:
#2 2.6960-2.6969" (68.478-68.501 MM)
Main:
Main 2:
#3 2.7550-2.7559" (69.977-70. MM)
Main 3:
#4 2.8140-2.8150" (71.476-71.501 MM)
Main 4:
EB7JL
Casting Numbers:
Comments:
LANDCRUISER
TOYOTA
3.9
241
TOYOTA
4.0
TOYOTA
4.0
241
3F-E
4.0
Thrust Width:
1.421
3F
@ #3
2.2044-2.2047" (55.992-56.000 MM)

Rods:
2.8342-2.8346" (71.988-72.000 MM)
Main:
Main:
Comments:
4-RUNNER TRUCK
450
3F-E
82-92
2H
3.583" (91.008 MM)
4-RUNNER
Cyl Bore:
88-92
@ #3
2H
1GRFE
3F
3.7008-3.7020" (94.-94.031 MM)
Thrust Width:
244
88-92
LANDCRUISER
Cyl Bore:
3.7008-3.7020" (94.-94.031 MM)
Cyl Bore:
243
65-74
3.543" (89.992 MM)
Thrust Width:
Stroke: 4.016" (102.006 MM)

2.1650-2.1657" (54.991-55.009 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
Comments:
DIESEL FORKLIFT
TOYOTA
LANDCRUISER
Cyl Bore:
Stroke: 3.740" (94.996 MM)

2.0861-2.0866" (52.987-53. MM)
Rods:
#1 2.6367-2.6376" (66.972-66.995 MM)
Main 1:
#2 2.6957-2.6967" (68.471-68.496 MM)
Main:
Main 2:
#3 2.7548-2.7557" (69.972-69.995 MM)
Main 3:
#4 2.8139-2.8148" (71.473-71.496 MM)
Main 4:
Comments:
LANDCRUISER, MFI
69-81
Cyl Bore:
IND
Stroke: 3.740" (94.996 MM)

2.0861-2.0866" (52.987-53. MM)
Rods:
#1 2.6367-2.6376" (66.972-66.995 MM)
Main 1:
#2 2.6957-2.6967" (68.471-68.496 MM)
Main:
Main 2:
#3 2.7548-2.7557" (69.972-69.995 MM)
Main 3:
#4 2.8139-2.8148" (71.473-71.496 MM)
Main 4:
Comments:
FORKLIFT
2GR-FE
3.464" (87.986 MM)
Cyl Bore:
237
05-06
3.7008-3.7013" (94.000-94.012 MM)
Stroke: 3.858" (97.993 MM)

2.1650-2.1657" (54.991-55.009 MM)
Rods:
2.7551-2.7559" (69.98-70. MM)
Main:
Main:
Comments:
DIESEL FORKLIFT
TOYOTA
AVALON
Cyl Bore:
03-05
1GR-FE
3.7008-3.7013" (94.000-94.012 MM)

Make
Liter
CID
Vin
Model
Year
TOYOTA
TOYOTA
6 Cylinders
4.2
258
2F
Stroke: 4.016" (102.006 MM)

2.1254-2.1260" (53.985-54. MM)
Rods:
1 2.6369-2.6378" (66.977-67. MM)
Main 1:
2 2.6959-2.6968" (68.476-68.499 MM)
Main 2:
3 2.7550-2.7559" (69.977-70. MM)
Main 3:
4 2.8140-2.8149" (71.476-71.498 MM)
Main 4:
LANDCRUISER, 2BBL
Comments:
TOYOTA
4.2
258
2F
4.4
LANDCRUISER
75-80
2F
81-87
2F
3.701" (94.005 MM)
Cyl Bore:
Thrust Width:
267
(cont.)
3.701" (94.005 MM)
Cyl Bore:
Stroke: 4.016" (102.006 MM)

2.1254-2.1260" (53.985-54. MM)
Rods:
#1 2.6369-2.6378" (66.977-67. MM)
Main 1:
#2 2.6955-2.6965" (68.466-68.491 MM)
Main:
Main 2:
#3 2.7555-2.7565" (69.99-70.015 MM)
Main 3:
#4 2.8135-2.8145" (71.463-71.488 MM)
Main 4:
Comments:
LANDCRUISER, 2BBL
TOYOTA
LANDCRUISER
Engine Model
@ #3
11Z
88-94
11Z
3.7795-3.7807" (95.999-96.03 MM)

Stroke: 4.016" (102.006 MM)
Cyl Bore:
2.1646-2.1654" (54.980-55.000 MM)
Rods:
2.9126-2.9134" (73.980-74.000 MM)
Main:
Main:
Comments:
OHV, DIESEL, DIR INJ, INDUSTRIAL THRUST WASHER THKNS .096-.098
TOYOTA
Stroke:
Rods:
4.5
274
1FZFE
3.740" (94.996 MM)

2.2434-2.2441" (56.982-57. MM)
LANDCRUISER
93-97
1FZ-FE
3.9370-3.9382" (100.-100.03 MM)
Cyl Bore:
1.110" (28.194 MM)

Rod Width:
2.7158-2.7165" (68.981-68.999 MM)
Main:
1.193 @ # 4
Main:
Thrust Width:
Balance: Internal
3.897" (98.984 MM)
Rear Seal Diameter:
Comments:
LANDCRUISER, EFI, LEXUS LX 450 1996 & 1997 OIL PUMP DRIVE GEAR DIA. 1.7315"
TOYOTA
6.5
396
2D
Stroke: 4.921" (124.993 MM)

2.4398-2.4405" (61.971-61.989 MM)
Rods:
2.9516-2.9524" (74.971-74.991 MM)
Main:
Main:
Comments:
DIESEL FORKLIFT
Cyl Bore:
64-93
@#4
Thrust Width:
TOYOTA
TOYOTA
2D
4.1339-4.1350" (105.001-105.029 MM)
8 Cylinders
4.7
287
2UZFE
TUNDRA
00-06
2UZ-FE
3.7009-3.7020" (94.002-94.031 MM)

Stroke: 3.3348" (84.704 MM)
Cyl Bore:
2.0465-2.0472" (51.982-52.000 MM)
Rods:
2.6373-2.6378" (66.988-67.000 MM)
Main:
Main:
PICKUP, EFI, 32 VALVE LANDCRUISER THRUST WASHER THICKNESS .0961-.0980" (2.440-2.490 MM)
Comments:
TRIUMPH
TRIUMPH
4 Cylinders
1.1
70
Stroke: 2.992" (75.997 MM)

1.6250-1.6255" (41.275-41.288 MM)
Rods:
2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
305073
Casting Numbers:
Comments:
62-64
Cyl Bore:
2.7279" (69.289 MM)
Cyl Bore:
2.8976" (73.600 MM)
Thrust Width:
1.5000" (38.100 MM)
Cyl Bore:
2.8976" (73.600 MM)
1147 CC, 63 HP HERALD, SPITFIRE MK, 1, 2
TRIUMPH
1.3
79
Stroke: 2.9921" (76.000 MM)

1.6250-1.6256" (41.275-41.290 MM)
Rods:
2.0005-2.0010" (50.813-50.825 MM)
Main:
Main:
Comments:
1296CC, SPITFIRE MK 3
TRIUMPH
1.3
Stroke: 2.9921" (76.000 MM)

1.8750-1.8755" (47.625-47.638 MM)
Rods:
2.3110-2.3115" (58.699-58.712 MM)
Main:
Main:
Comments:
1296CC, SPITFIRE MK 4
67-70
79
70-74
451

Make
Liter
CID
Vin
Model
TRIUMPH
TRIUMPH
4 Cylinders
1.5
91
FH
Stroke: 3.445" (87.503 MM)

1.8750-1.8755" (47.625-47.638 MM)
Rods:
#1 2.3110-2.3115" (58.699-58.712 MM)
Main:
Main:
1406, 1774, 311406, 5235, W2157
Casting Numbers:
Comments:
Year
73-80
Cyl Bore:
2.901" (73.685 MM)
Cyl Bore:
2.901" (73.685 MM)
Cyl Bore:
3.560" (90.40 MM)
Cyl Bore:
3.560" (90.40 MM)
Cyl Bore:
3.386" (86.004 MM)
Engine Model
(cont.)
FH
1BC
TRIUMPH
1.5
91
FM
Stroke: 3.445" (87.503 MM)

1.8750-1.8755" (47.625-47.638 MM)
Rods:
#1 2.3110-2.3115" (58.699-58.712 MM)
Main:
Main:
1406, 1774, 311406, 5235, W2157
Casting Numbers:
Comments:
1BC
TRIUMPH
2.0
122
CL
Stroke: 3.070" (77.98 MM)

1.7500-1.7504" (44.45-44.46 MM)
Rods:
#1 2.1255-2.1260" (53.988-54. MM)
Main:
Main:
1746N, 1G5B, 303034, 308129
Casting Numbers:
Comments:
2-1BC, TR-7
TRIUMPH
2.0
122
2.1
130
75-81
CV
Stroke: 3.070" (77.98 MM)

1.7500-1.7504" (44.45-44.46 MM)
Rods:
#1 2.1255-2.1260" (53.988-54. MM)
Main:
Main:
1746N, 1G5B, 303034, 308129
Casting Numbers:
Comments:
EFI, TR-7
TRIUMPH
73-80
75-81
Stroke: 3.622" (91.999 MM)

2.0860-2.0866" (52.984-53. MM)
Rods:
#1 2.4790-2.4795" (62.967-62.979 MM)
Main:
Main:
301015, 581921
Casting Numbers:
Comments:
TR- 3B AND TR-4, 2138 CC
62-67
TRIUMPH
TRIUMPH
2.0
122
2.5
152
Cyl Bore:
2.9405" (74.689 MM)
Cyl Bore:
2.941" (74.701 MM)
CF
68-76
TRIUMPH
3.5
215
10
3.5
215
3.5
Stroke: 2.795" (70.993 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Comments:
2BC
215
80-81
Cyl Bore:
3.500" (88.9 MM)
Cyl Bore:
3.500" (88.9 MM)
Cyl Bore:
3.500" (88.9 MM)
11
Stroke: 2.795" (70.993 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
Comments:
2BC
TRIUMPH
CF
8 Cylinders
Stroke: 2.795" (70.993 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2BC
Comments:
TRIUMPH
CV
67-78
Stroke: 3.740" (94.996 MM)

1.8750-1.8755" (47.625-47.638 MM)
Rods:
#1 2.3110-2.3115" (58.699-58.712 MM)
Main:
Main:
RRY ENIGU
Casting Numbers:
Comments:
2-1BC, TR-6
TRIUMPH
CL
6 Cylinders
Stroke: 2.992" (76.000 MM)

1.8750-1.8755" (47.625-47.638 MM)
Rods:
2.3110-2.3115" (58.699-58.712 MM)
Main:
Main:
OHV, 1998 CC, GAS ENGINE
Comments:
TRIUMPH
FM
80-81
12
80-81
452
10
11
12

Make
Liter
CID
Vin
Model
Year
TRIUMPH
TRIUMPH
8 Cylinders
3.5
215
Stroke: 2.795" (70.993 MM)

1.9995-2.0005" (50.787-50.813 MM)
Rods:
2.2983-2.2993" (58.377-58.402 MM)
Main:
Main:
2BC
Comments:
13
80-81
0.3
16
DS, WPD3
0.3
18
W7, WPD4
2 Cylinders
0.5
28
10TWO
Stroke: 2.677" (67.996 MM)

Cyl Bore:
1.6535" (41.999 MM)
Rods:
2.1260" (54. MM)
Main:
Main:
DIESEL,WESTERBEKE,4-STROKE,WATER COOL,INDIRECT INJ
Comments:
0.6
37
0.8
50
Stroke: 3.500" (88.9 MM)

1.7380-1.7480" (44.145-44.399 MM)
Rods:
1.7380-1.7480" (44.145-44.399 MM)
Main:
Main:
Comments:
MODEL AFT, AFTL, 12 HORSEPOWER
W13
47
1.0
W18
60
1.1
W18
2.559" (64.999 MM)
@ FRONT
W21
68
Stroke: 3.230" (82.042 MM)

1.7310-1.7320" (43.967-43.993 MM)
Rods:
2.0440-2.0450" (51.918-51.943 MM)
Main:
Main:
Comments:
DIESEL, WESTERBEKE, 24 HORSEPOWER
W21
2.874" (73. MM)
@ FRONT
M30
Cyl Bore:
UNIVERSAL
UNIVERSAL
AFT, AFTL
3 Cylinders
0.8
Stroke: 3.071" (78.003 MM)

Cyl Bore:
1.6516-1.6522" (41.951-41.966 MM)
Rods:
1.6516-1.6522" (41.951-41.966 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, WESTERBEKE, 4-STROKE,WATER COOLED,D/I,8 KW
UNIVERSAL
@ FRONT
3.000" (76.2 MM)
Stroke: 3.071" (78.003 MM)

Cyl Bore:
1.6516-1.6522" (41.951-41.966 MM)
Rods:
1.6516-1.6522" (41.951-41.966 MM)
Main:
Main:
Thrust Width:
DIESEL, WESTERBEKE, 4-STROKE,WATER COOLED,D/I,6 KW
Comments:
UNIVERSAL
W13
2.756" (70.002 MM)
BLUEJACKET TWI
Cyl Bore:
UNIVERSAL
UNIVERSAL
10TWO
2.559" (64.999 MM)
Stroke: 3.071" (78.003 MM)

Cyl Bore:
1.6516-1.6522" (41.951-41.966 MM)
Rods:
2.3207-2.3213" (58.946-58.961 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL,WESTERBEKE,4-STROKE,WATER COOLED,D/I,4.4 KW
UNIVERSAL
W7, WPD4
3.000" (76.2 MM)
UNIVERSAL
UNIVERSAL
DS, WPD3
3.000" (76.2 MM)
Stroke: 2.625" (66.675 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.6245-1.6250" (41.262-41.275 MM)
Main:
Main:
Comments:
DIESEL,WESTERBEKE,VERTICAL,INDIRECT INJ,WATER COOL
UNIVERSAL
13
1 Cylinder
Stroke: 2.250" (57.15 MM)

Cyl Bore:
1.6245-1.6250" (41.262-41.275 MM)
Rods:
1.6245-1.6250" (41.262-41.275 MM)
Main:
Main:
DIESEL, WESTERBEKE,VERTICAL,INDIR INJ,WATER COOLED
Comments:
UNIVERSAL
(cont.)
3.500" (88.9 MM)
Cyl Bore:
UNIVERSAL
UNIVERSAL
Engine Model
M30
2.9920-2.9930" (75.997-76.022 MM)
4 Cylinders
1.1
64
Stroke: 3.125" (79.375 MM)

1.5620-1.5625" (39.675-39.688 MM)
Rods:
1.9880-1.9885" (50.495-50.508 MM)
Main:
Main:
GAS, ALSO STEVEDORE, 30 HORSEPOWER
Comments:
ATOMIC FOUR
Cyl Bore:
453
2.5625" (65.088 MM)
ATOMIC FOUR

Make
Liter
CID
Vin
Model
Year
UNIVERSAL
UNIVERSAL
4 Cylinders
1.3
80
UNIVERSAL
1.5
UNIVERSAL
1.5
91
UNIVERSAL
1.6
UNIVERSAL
1.9
UNIVERSAL
2.3
UNIVERSAL
2.4
@ FRONT
M50
M50
3.350" (85.09 MM)
UNIMITE FOUR
SUPER FOUR
6 Cylinders
3.8
230
ARROW
5.2
320
5.6
340
Stroke: 4.500" (114.3 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
MODEL Y350 THRU Y353P & 350 THRU 354, 165 H.P.
MARLIN
4.000" (101.6 MM)
KNIGHT
Cyl Bore:
Y350-Y353P
4.000" (101.6 MM)
UNIVERSAL
UNIVERSAL
ARROW
3.4375" (87.313 MM)
MARLIN
Stroke: 4.250" (107.95 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
Comments:
MODELS 320 THRU 324, TARPON MODELS Y330 THRU 334
UNIVERSAL
LSG, LSGR
3.250" (82.55 MM)
Cyl Bore:
Stroke: 4.1250" (104.775 MM)

Cyl Bore:
1.9870-1.9880" (50.47-50.495 MM)
Rods:
2.4970-2.4980" (63.424-63.449 MM)
Main:
Main:
BLUEFIN, MODELS 230 THRU 234, 100 HORSEPOWER
Comments:
UNIVERSAL
HF, HFR, HF-V
3.250" (82.55 MM)
Cyl Bore:
UNIVERSAL
UNIVERSAL
BN, BNM, BMR
2.750" (69.85 MM)
Cyl Bore:
149
Stroke: 4.500" (114.3 MM)

1.9980-1.9985" (50.749-50.762 MM)
Rods:
1.9980-1.9985" (50.749-50.762 MM)
Main:
Main:
Comments:
MODEL LSG, LSGR, 55 HORSEPOWER
W33
3.071" (78.003 MM)
UTILITY FOUR
Cyl Bore:
115
141
M40
W33
95
Stroke: 4.250" (107.95 MM)

1.7470-1.7480" (44.374-44.399 MM)
Rods:
1.9870-1.9880" (50.47-50.495 MM)
Main:
Main:
Comments:
MODELS HF, HFR, HF-VD, 70 HORSEPOWER
@ FRONT
2.9920-2.9930" (75.997-76.022 MM)
91
Stroke: 3.230" (82.042 MM)

1.7310-1.7320" (43.967-43.993 MM)
Rods:
2.0440-2.0450" (51.918-51.943 MM)
Main:
Main:
Comments:
W27
2.874" (73.000 MM)
M40
Cyl Bore:
Stroke: 3.071" (78.003 MM)

Cyl Bore:
1.8892-1.8898" (47.986-48.001 MM)
Rods:
2.2419-2.2425" (56.944-56.96 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, WESTERBEKE,4-STROKE,WATER COOL,D/I,12.5 KW
Stroke: 4.000" (101.6 MM)

1.4980-1.4990" (38.049-38.075 MM)
Rods:
1.4970-1.4980" (38.024-38.049 MM)
Main:
Main:
Comments:
MODELS BN, BNM, BMR, BMNR, 25 HORSEPOWER
(cont.)
W27
Stroke: 3.071" (78.003 MM)

Cyl Bore:
1.6516-1.6522" (41.951-41.966 MM)
Rods:
1.6516-1.6522" (41.951-41.966 MM)
Main:
Main:
Thrust Width:
DIESEL, WESTERBEKE,4-STROKE,WATER COOLED,D/I,11 KW
Comments:
Stroke: 3.230" (82.042 MM)

1.7310-1.7320" (43.967-43.993 MM)
Rods:
2.0440-2.0450" (51.918-51.943 MM)
Main:
Main:
Comments:
Engine Model
8 Cylinders
4.6
283
Stroke: 3.000" (76.2 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2978-2.2988" (58.364-58.39 MM)
Main:
Main:
MODELS LEV THRU LEVH25, 188 H.P.
Comments:
LITTLE KING
Cyl Bore:
454
3.875" (98.425 MM)
LEV-LEVH25

Make
Liter
CID
Vin
Model
Year
UNIVERSAL
UNIVERSAL
8 Cylinders
7.1
430
BIG KING
Stroke: 3.700" (93.98 MM)

2.5990-2.6000" (66.015-66.04 MM)
Rods:
2.8990-2.9000" (73.635-73.66 MM)
Main:
Main:
MODELS NKEV & NKEV-25, 277 H.P.
Comments:
1.2
73
55-65
1.5
89
1.5
89
Cyl Bore:
3.0315" (77. MM)
Cyl Bore:
3.0120" (76.505 MM)
Thrust Width:
.9850
FX
Stroke: 3.1500" (80.01 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244*" (53.939-53.96 MM)
Main:
Main:
3.3450" (84.963 MM)
Rear Seal Diameter:
A1456
Casting Numbers:
Comments:
1BC * SOME BEARING MANF. SHOW 2.1241-2.1248"
VOLKSWAGEN
NKEV & NKEV-
4 Cylinders
Stroke: 2.520" (64.008 MM)

2.1642-2.1650" (54.971-54.991 MM)
Rods:
1-3 2.1642-2.1650" (54.971-54.991 MM)
Main 1:
4 1.5740-1.5748" (39.98-40. MM)
Main 2:
TYPE 1
Comments:
VOLKSWAGEN
(cont.)
4.300" (109.22 MM)
Cyl Bore:
VOLKSWAGEN
VOLKSWAGEN
Engine Model
78-80
FC
RABBIT
73-75
FX
FC
3.0120" (76.505 MM)

Stroke: 3.1500" (80.01 MM)
Cyl Bore:
1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
.9850
Main:
Thrust Width:
3.3450" (84.963 MM)
Rear Seal Diameter:
A1456
Casting Numbers:
Comments:
WATER COOLED, RABBIT * SOME BEARING MANF. SHOW 2.1241-2.1248"
VOLKSWAGEN
1.5
89
EH
RABBIT
78-79
EH
3.0120" (76.505 MM)

Stroke: 3.1500" (80.01 MM)
Cyl Bore:
1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
.9850
Main:
Thrust Width:
3.3450" (84.963 MM)
Rear Seal Diameter:
A1456
Casting Numbers:
Comments:
EFI, WATER COOLED, RABBIT * SOME BEARING MANF. SHOW 2.1241-2.1248"
VOLKSWAGEN
1.5
90
CK
77-81
Stroke: 3.1500" (80.01 MM)

Cyl Bore:
1.8094-1.8101" (45.959-45.977 MM)
Rods:
2.1243-2.1251" (53.957-53.978 MM)
Main:
Main:
Thrust Width:
3.345" (84.963 MM)
Rear Seal Diameter:
049H
Casting Numbers:
Comments:
DIESEL, 4-STROKE, LIQUID COOLED, OHC, MODEL 068.2
VOLKSWAGEN
1.6
97
ME
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
DIESEL, JETTA, GOLF, RABBIT
VOLKSWAGEN
1.6
Thrust Width:
97
AL
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
1BC, AIR COOLED
VOLKSWAGEN
1.6
Stroke: 2.717" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
2BC
97
.985 @ CENTER
GOLF
Cyl Bore:
86-92
@ #3
59-74
3.3661" (85.500 MM)
Cyl Bore:
3.3661" (85.500 MM)
73-73
455
ME
2.992" (75.997 MM)
Cyl Bore:
AD
CK
3.0120" (76.505 MM)
AL
AD

Make
Liter
CID
Vin
Model
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
1.6
97
AE
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
2BC
Comments:
VOLKSWAGEN
1.6
97
1.6
97
1.6
97
1.6
97
1.6
97
1.6
97
1.6
97
1.6
97
1.6
97
3.3661" (85.500 MM)
Cyl Bore:
3.3661" (85.500 MM)
Cyl Bore:
3.3661" (85.500 MM)
Cyl Bore:
3.3661" (85.500 MM)
Cyl Bore:
3.3661" (85.500 MM)
Cyl Bore:
3.3661" (85.500 MM)
73-74
73-74
73-74
75-75
75-78
AS
Stroke: 2.7170" (69.000 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
1BC
VOLKSWAGEN
Cyl Bore:
73-74
AL
Stroke: 2.7170" (69.000 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
1BC
VOLKSWAGEN
3.3661" (85.500 MM)
AG
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
Cyl Bore:
73-74
AM
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
3.3661" (85.500 MM)
AK
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
2BC, AIR COOLED
VOLKSWAGEN
Cyl Bore:
AH
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
3.3661" (85.500 MM)
AG
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
73-73
Cyl Bore:
AF
Stroke: 2.7170" (69.000 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
Main:
Comments:
1BC
VOLKSWAGEN
Year
75-79
AJ
75-80
Engine Model
(cont.)
AE
AF
AG
AH
AK
AM
AG
AL
AS
AJ
3.130" (79.502 MM)

Stroke: 3.150" (80.01 MM)
Cyl Bore:
1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main 1:
**
Main:
Main 4:
3.345" OR 3.228"
Rear Seal Diameter:
Comments:
FI, WATER COOLED ** # 4 USES GROOVED UPPER & LOWER BEARINGS
VOLKSWAGEN
1.6
Stroke: 2.717" (69.012 MM)

2.1640-2.1650" (54.966-54.991 MM)
Rods:
2.1642-2.1650" (54.971-54.991 MM)
Main:
3.345 OR 3.228 (NM)
Main:
Rear Seal Diameter:
Comments:
1BC, WATER COOLED
97
AF
75-81
Cyl Bore:
456
3.386" (86.004 MM)
AF

Make
Liter
CID
Vin
Model
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
1.6
97
FN
Stroke: 3.150" (80.01 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
Comments:
VOLKSWAGEN
1.6
97
76-76
Cyl Bore:
1.6
97
76-76
VOLKSWAGEN
1.6
97
76-77
Cyl Bore:
76-80
VOLKSWAGEN
1.6
97
VOLKSWAGEN
1.6
97
76-81
VOLKSWAGEN
1.6
97
79-80
Cyl Bore:
81-84
VOLKSWAGEN
1.6
97
VOLKSWAGEN
1.6
97
VOLKSWAGEN
1.6
97
VOLKSWAGEN
1.6
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
TURBO DIESEL
97
@ #3
83-84
3.012" (76.500 MM)
Cyl Bore:
2.992" (75.997 MM)
85-85
457
CY
3.012" (76.505 MM)
Cyl Bore:
JD
CS
@ #3
82-84
JK
CR
3.012" (76.505 MM)
CY
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
DIESEL
EJ
@ #3
82-84
Stroke: 3.402" (86.411 MM)

Cyl Bore:
1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1243-2.1251" (53.957-53.978 MM)
Main:
Main:
Thrust Width:
Comments:
TURBO DIESEL, 4-STROKE,LIQUID COOL,OHC,MODEL 068.A
YH
3.012" (76.505 MM)
CS
Stroke: 3.401" (86.385 MM)

Cyl Bore:
1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1243-2.1251" (53.957-53.978 MM)
Main:
Main:
Thrust Width:
Comments:
YG
3.150" (80.01 MM)
CR
Stroke: 3.402" (86.411 MM)

Cyl Bore:
1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Thrust Width:
Comments:
EE
3.150" (80.01 MM)
EJ
Stroke: 3.150" (80.01 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
Comments:
FI * SOME BEARING MANF. SHOW 2.1241-2.1248"
YK
3.150" (80.01 MM)
YH
Stroke: 3.150" (80.01 MM)

Cyl Bore:
1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
Comments:
EFI, WATER COOLED * SOME BEARING MANF. SHOW 2.1241-2.1248"
FN
3.150" (80.01 MM)
YG
Stroke: 3.150" (80.01 MM)

Cyl Bore:
1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244*" (53.939-53.96 MM)
Main:
Main:
Comments:
(cont.)
3.150" (80.01 MM)
EE
Stroke: 3.150" (80.01 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
Comments:
FI * SOME BEARING MANF. SHOW 2.1241-2.1248"
Engine Model
3.150" (80.01 MM)
YK
Stroke: 3.150" (80.01 MM)

Cyl Bore:
1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
Comments:
VOLKSWAGEN
Year
JK
JD

Make
Liter
CID
Vin
Model
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
1.6
97
JR
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
TURBO DIESEL
Comments:
VOLKSWAGEN
1.6
97
1.6
97
1.6
97
1.6
97
1.7
1.7
102
1.7
102
1.7
102
1.7
102
1.7
Cyl Bore:
2.992" (75.997 MM)
85-85
86-92
102
104
73-73
Cyl Bore:
3.543" (89.992 MM)
Cyl Bore:
3.543" (89.992 MM)
Cyl Bore:
3.543" (89.992 MM)
Cyl Bore:
3.543" (89.992 MM)
Cyl Bore:
3.543" (89.992 MM)
Cyl Bore:
3.130" (79.502 MM)
73-73
73-73
73-74
EA
73-74
EN
Stroke: 3.402" (86.411 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
049F
Casting Numbers:
Comments:
MFI * SOME BEARING MANF. SHOW 2.1241-2.1248"
81-84
Thrust Width:
458
Engine Model
(cont.)
JR
MD
ME
MF
MF
@ #3
CB
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
2.992" (75.997 MM)
CE
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
VOLKSWAGEN
Cyl Bore:
85-85
CD
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
VOLKSWAGEN
2.992" (75.997 MM)
CA
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
VOLKSWAGEN
Cyl Bore:
85-85
Thrust Width:
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
VOLKSWAGEN
2.992" (75.997 MM)
MF
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
TURBO DIESEL
VOLKSWAGEN
Cyl Bore:
MF
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
TURBO DIESEL
VOLKSWAGEN
2.992" (75.997 MM)
ME
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
DIESEL
VOLKSWAGEN
85-85
Cyl Bore:
MD
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
TURBO DIESEL
VOLKSWAGEN
Year
@ #3
CA
CD
CE
CB
EA
EN

Make
Liter
CID
Vin
Model
Year
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
1.7
104
JF
Stroke: 3.402" (86.411 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
049F
Casting Numbers:
Comments:
Engine Model
81-84
(cont.)
JF
3.130" (79.502 MM)
Cyl Bore:
Thrust Width:
@ #3
VOLKSWAGEN
1.7
104
WT
Stroke: 3.402" (86.411 MM)

1.8087-1.8094" (45.941-45.959 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
Main:
049F
Casting Numbers:
Comments:
MFI * SOME BEARING MANF. SHOW 2.1241-2.1248"
VOLKSWAGEN
1.8
109
1.8
109
1.8
109
90-94
2H
3.189" (81.001 MM)
FOX
83-89
JH
3.189" (81.001 MM)
Cyl Bore:
Thrust Width:
RD
WT
@ #3
CABRIOLET
Cyl Bore:
JH
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED, GTI, SCIROCCO, FOX
VOLKSWAGEN
Thrust Width:
2H
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, CABRIOLET, FOX, GOLF, GTI, JETTA, SOHC
VOLKSWAGEN
82-83
3.130" (79.502 MM)
Cyl Bore:
@ #3
GOLF
85-87
RD
3.189" (81.001 MM)

Stroke: 3.402" (86.400 MM)
Cyl Bore:
1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM) *
Main:
@ #3
Main:
Thrust Width:
Comments:
MFI, GOLF GTI * NUMBER #4 MAIN MUST USE THE FULL GROOVED UPPER AND LOWER BEARING
VOLKSWAGEN
1.8
109
GX
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED, GOLF, JETTA
VOLKSWAGEN
1.8
109
PL
1.8
109
VOLKSWAGEN
1.8
Thrust Width:
VOLKSWAGEN
1.8
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED
Thrust Width:
@ #3
85-90
Thrust Width:
459
MZ
3.189" (81.001 MM)
JN
Cyl Bore:
RV
@ #3
85-86
Cyl Bore:
109
88-92
3.189" (81.001 MM)
MZ
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED
PL
@ #3
JETTA
Cyl Bore:
109
86-89
3.189" (81.001 MM)
Thrust Width:
RV
GX
@ #3
GOLF
Cyl Bore:
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, JETTA
85-90
3.189" (81.001 MM)
Thrust Width:
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, DOHC, GOLF GTI, JETTA, SCIROCCO
VOLKSWAGEN
GOLF
Cyl Bore:
3.189" (81.001 MM)
@ #3
JN

Make
Liter
CID
Vin
Model
Year
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
1.8
109
LM
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
MFI, WATER COOLED
Comments:
VOLKSWAGEN
1.8
109
1.8
VOLKSWAGEN
1.8
109
109
1.8
110
VOLKSWAGEN
1.8
112
1.8
112
1.8
112
1.8
112
1.8
112
VOLKSWAGEN
1.8
112
@ #3
PASSAT
98-01
Cyl Bore:
3.230" (82.042 MM)
Cyl Bore:
3.661" (92.989 MM)
Cyl Bore:
3.661" (92.989 MM)
Cyl Bore:
3.661" (92.989 MM)
Cyl Bore:
3.661" (92.989 MM)
Cyl Bore:
3.661" (92.989 MM)
Cyl Bore:
3.661" (92.989 MM)
73-74
73-74
73-75
ED
73-75
AW
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
Thrust Width:
91-93
EC
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
3.189" (81.001 MM)
AT
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
Cyl Bore:
AN
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
3.189" (81.001 MM)
AEB
Stroke: 2.598" (65.989 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
2BC
VOLKSWAGEN
89-93
Cyl Bore:
ABG
Stroke: 3.402" (86.400 MM)

1.8819" (47.800 MM)
Rods:
2.1260" (54.000 MM)
Main:
Main:
026R
Casting Numbers:
Comments:
DOHC, TURBO, 5 VALVE PER CHAMBER
74-74
AP
74-75
460
PF
@ #3
PG
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED
VOLKSWAGEN
88-92
3.189" (81.001 MM)
Thrust Width:
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED, CORRADO SUPERCHARGED
LM
@ #3
PF
Cyl Bore:
(cont.)
3.189" (81.001 MM)
Thrust Width:
Stroke: 3.402" (86.400 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
MFI, WATER COOLED
VOLKSWAGEN
85-92
Cyl Bore:
Engine Model
PG
ABG
AEB
AN
AT
EC
ED
AW
AP

Make
Liter
CID
Vin
Model
Year
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
1.9
116
ALH
Stroke: 3.7598" (95.500 MM)

1.8802-1.8810" (47.758-47.778 MM)
Rods:
2.1243-2.1251" (53.958-53.978 MM)
Main:
Main:
TURBO DIESEL, ALSO GOLF & JETTA
Comments:
VOLKSWAGEN
1.9
116
BEETLE
JETTA
Stroke: 3.7598" (95.500 MM)

Cyl Bore:
1.8819" (47.8 MM) *
Rods:
2.1260" (54. MM) *
Main:
Main:
Comments:
TURBO DIESEL, PASSAT, JETTA * .010,.020,.030 UNDERSIZE AVLBL
VOLKSWAGEN
1.9
116
TDI
Stroke: 3.7598" (95.500 MM)

1.8819" (47.8 MM)
Rods:
2.1300" (54.102 MM)
Main:
Main:
Comments:
TURBO DIESEL, PASSAT
VOLKSWAGEN
1.9
117
DH
VOLKSWAGEN
2.0
VOLKSWAGEN
2.0
120
120
2.0
120
2.0
120
76-77
3.701" (94.005 MM)
Cyl Bore:
3.701" (94.005 MM)
Cyl Bore:
3.701" (94.005 MM)
76-79
GE
77-79
VANAGON
Stroke: 2.795" (70.993 MM)

Cyl Bore:
2.1644-2.1652" (54.976-54.996 MM) *
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Thrust Width:
Comments:
EFI, VANAGON AIR-COOLED * SMALL ROD = 1.9678-1.9683"
VOLKSWAGEN
2.0
121
AEG
VOLKSWAGEN
2.0
121
Stroke: 3.653" (92.786 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
SOHC, MFI, 8 VALVE, GOLF III, JETTA III, GTI
72-84
98-03
3.248" (82.510 MM)
Thrust Width:
@ #3
GOLF
461
GD
CJ
GE
CV
@ #1
BEETLE
Cyl Bore:
DH
3.701" (94.005 MM)
Cyl Bore:
ABA
AHH
@ #1
CJ
Stroke: 3.650" (92.800 MM)

1.8802-1.8810" (47.758-47.778 MM)
Rods:
2.1245-2.1253" (53.963-53.983 MM)
Main:
Main:
Balance: Internal
1.3779" (35.000 MM)
3.3464" (85.000 MM)
Rear Seal Diameter:
06AF
Casting Numbers:
Comments:
SOHC, SFI, BEETLE
83-85
Cyl Bore:
CV
AAZ
3.701" (94.005 MM)
GD
Stroke: 2.795" (70.993 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
VOLKSWAGEN
95-99
VANAGON
Thrust Width:
Stroke: 2.795" (70.993 MM)

2.1644-2.1652" (54.976-54.996 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
VOLKSWAGEN
93-98
3.1303" (79.51 MM)
Cyl Bore:
Stroke: 2.795" (70.993 MM)

1.9677-1.9685" (49.98-50.000 MM)
Rods:
2.3611-2.3618" (59.972-59.99 MM)
Main:
Main:
Comments:
FI
ALH
3.131" (79.527 MM)
PASSAT
Cyl Bore:
Stroke: 2.713" (68.91 MM)

2.1647-2.1652" (54.983-54.996 MM)
Rods:
1 2.3614-2.3618" (59.980-59.990 MM)
Main 1:
2 2.1642-2.1650" (54.971-54.991 MM)
Main:
Main 2:
3 2.1642-2.1650" (54.971-54.991 MM)
Main 3:
4 1.5742-1.5748" (39.985-40.000 MM)
Main 4:
Comments:
MFI, VANAGON
(cont.)
3.1299" (79.500 MM)
Cyl Bore:
00-04
Engine Model
93-99
3.248" (82.499 MM)
AEG
ABA

Make
Liter
CID
Vin
Model
Year
VOLKSWAGEN
VOLKSWAGEN
4 Cylinders
2.0
121
ABA
Stroke: 3.650" (92.800 MM)

1.8819-1.8828" (47.800-47.823 MM)
Rods:
2.1260-2.1269" (54.000-54.023 MM)
Main:
Main:
CIS-E MOTRONIC SFI, CABRIO, GOLF, GTI & JETTA
Comments:
VOLKSWAGEN
2.0
121
2.0
121
VOLKSWAGEN
2.1
129
99-03
JETTA
MV
ABA
AEG
3.2484" (82.510 MM)
Cyl Bore:
2.9920" (75.997 MM)

2.1647-2.1652" (54.983-54.996 MM)
#1 2.3611-2.3614" (59.972-59.98 MM)
#2 2.1642-2.1645" (54.971-54.978 MM)
#3 2.1642-3.1645" (54.971-80.378 MM)
#4 1.5742-1.5748" (39.985-40. MM)
RED DOT CRANKSHAFT *
99-02
GOLF
9A
(cont.)
3.250" (82.500 MM)
Cyl Bore:
Stroke: 3.653" (92.786 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.1236-2.1244" (53.939-53.96 MM)
Main:
Main:
Comments:
DOHC, MPI, PASSAT, JETTA GLI
Stroke:
Rods:
Main 1:
Main:
Main 2:
Main 3:
Main 4:
Main 5:
GOLF
Cyl Bore:
AEG
Stroke: 3.650" (92.710 MM)

1.8802-1.8810" (47.758-47.778 MM)
Rods:
2.1245-2.1253" (53.963-53.983 MM)
Main:
Main:
Comments:
SOHC, GOLF, GTI, JETTA
VOLKSWAGEN
Engine Model
90-93
VANAGON
Cyl Bore:
Thrust Width:
9A
3.248" (82.499 MM)
86-91
MV
3.7010-3.7020" (94.005-94.031 MM)
@ #1
BLUE, RST
Casting Numbers:
Comments:
MFI, WATERBOXER, VANAGON * BLUE DOT CRANKSHAFT: #1=2.3614-2.3618", #2 & 3=2.1645-2.1649"
#4=1.5742-1.5748"
VOLKSWAGEN
VOLKSWAGEN
5 Cylinders
2.1
131
KM
Stroke: 3.402" (86.411 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
MFI, QUANTUM
Comments:
VOLKSWAGEN
2.2
136
2.2
VOLKSWAGEN
2.2
136
VOLKSWAGEN
2.2
Cyl Bore:
3.130" (79.502 MM)
74-84
83-83
Cyl Bore:
Thrust Width:
136
136
JT
Thrust Width:
462
KX
3.189" (81.001 MM)
@ #4
QUANTUM
Cyl Bore:
WE
@ #4
85-88
Thrust Width:
KM
3.130" (79.502 MM)
KX
Cyl Bore:
KM
@ #4
WE
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
MFI
Stroke: 3.386" (86.004 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
MFI, QUANTUM, (4WD)
3.130" (79.502 MM)
Thrust Width:
Stroke: 3.402" (86.411 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
MFI
84-84
Cyl Bore:
KM
Stroke: 3.402" (86.411 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
MFI
VOLKSWAGEN
QUANTUM
85-88
3.189" (81.001 MM)
@ #4
JT

Make
Liter
CID
Vin
Model
Year
VOLKSWAGEN
VOLKSWAGEN
5 Cylinders
2.3
140
JT
Stroke: 3.400" (86.36 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
MFI, QUANTUM, QUANTUM SYNCRO, (4WD)
Comments:
VOLKSWAGEN
2.4
146
2.5
EUROVAN
153
AAF
2.8
169
ATQ
2.8
169
92-95
AAF
3.189" (81.001 MM)
2.8
170
PASSAT
01-02
Cyl Bore:
3.248" (82.500 MM)
Thrust Width:
@ #4
AHA
Stroke: 3.402" (86.400 MM)

2.1243-2.1251" (53.958-53.978 MM)
Rods:
2.5574-2.5582" (64.958-64.978 MM)
Main:
Main:
Comments:
DOHC, PASSAT SEDAN, 30 VALVE
VOLKSWAGEN
AAB
6 Cylinders
Stroke: 3.402" (86.400 MM)

2.1243-2.1251" (53.958-53.978 MM)
Rods:
2.5574-2.5582" (64.958-64.978 MM)
Main:
Main:
DOHC, PASSAT GLS, 30 VALVE
Comments:
VOLKSWAGEN
93-97
EUROVAN
Cyl Bore:
VOLKSWAGEN
VOLKSWAGEN
JT
3.1299" (79.500 MM)
Cyl Bore:
Stroke: 3.760" (95.504 MM)

1.8800-1.8810" (47.752-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
SOHC, 10 VALVE, EUROVAN
87-87
@ #4
Thrust Width:
AAB
(cont.)
3.250" (82.55 MM)
Cyl Bore:
Stroke: 3.760" (95.500 MM)

1.8802-1.8810" (47.758-47.778 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
SOHC, DIESEL
VOLKSWAGEN
QUANTUM
Engine Model
PASSAT
98-00
Cyl Bore:
3.248" (82.500 MM)
Thrust Width:
@ #4
AAA
CORRADO
92-99
ATQ
AHA
AAA
3.189" (81.001 MM)

Stroke: 3.555" (90.297 MM)
Cyl Bore:
2.1243-2.1251" (53.958 - 53.978 MM)
Rods:
2.3605-2.3613" (59.958-59.978 MM)
Main:
.7874" #3
Main:
Thrust Width:
1.3779" (35.000 MM)
3.3464" (85.000 MM)
Rear Seal Diameter:
Comments:
DOHC, VR-6 12 VALVE, 15 VEE BLOCK, PASSAT, GOLF BALANCE @ 30% REC
VOLVO
VOLVO
Stroke:
Rods:
1 Cylinder
0.4
27
D1 & MD1
3.543" (90.000 MM)

2.1240-2.1244" (53.950-53.960 MM)
D1
Cyl Bore:
3.125" (79.370 MM)
Rod Width:
1.066-1.076" (27.076-27.330 MM)
2.6238-2.6246" ( 66.645-66.665 MM)

Main:
Main:
DIESEL, 4 STROKE, 5, 6 & 7 HP
Comments:
VOLVO
VOLVO
Stroke:
Rods:
2 Cylinders
0.9
54
D2 & MD2
3.543" (90.000 MM)

2.1240-2.1244" (53.950-53.960 MM)
D2
Cyl Bore:
3.125" (79.370 MM)
Rod Width:
1.066-1.076" (27.076-27.330 MM)
2.6238-2.6246" (66.645-66.665 MM)

Main:
Main:
DIESEL, 890CC, 15.5 HP, 4 STROKE, OHV
Comments:
VOLVO
VOLVO
4 Cylinders
1.8
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
#1 2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
140 SERIES
Comments:
109
B18
140
Cyl Bore:
463
61-68
3.311" (84.099 MM)
B18

Make
Liter
CID
Vin
Model
Year
VOLVO
VOLVO
4 Cylinders
1.8
109
AQ95
Stroke: 3.150" (80.000 MM)

Cyl Bore:
2.1295-2.1300" (54.089-54.102 MM)
Rods:
2.4977-2.4982" (63.441-63.454 MM)
Main:
Main:
GAS, MARINE, ALSO MODEL AQ95A, AQ100, AQ110, AQ120
Comments:
VOLVO
2.0
121
VOLVO
2.0
121
VOLVO
2.0
VOLVO
2.1
2.1
B20F
2.1
AQ140A
130
AQ125
2.1
130
VOLVO
2.1
45
VOLVO
2.1
130
VOLVO
2.1
B-21
47
B-21
48
464
76-80
B21
81-81
B21
81-85
B21
3.622" (91.999 MM)
B-21
Cyl Bore:
AQ125A
3.622" (91.999 MM)
Cyl Bore:
130
83-85
3.622" (91.999 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
Comments:
B-21, TURBO, EFI
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
Comments:
B-21, EFI
B-21
49
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
Comments:
B-21, EFI
AQ125
3.622" (91.999 MM)
Cyl Bore:
130
81-83
AQ125A
Cyl Bore:
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
Comments:
B-21, EFI
AQ140A
3.622" (91.999 MM)
Cyl Bore:
130
B20F
3.620" (92.000 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
Comments:
SINGLE CARB, 117 HP
VOLVO
74-75
3.500" (88.9 MM)
Cyl Bore:
129
B20E
@ #5
Thrust Width:
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
Comments:
SINGLE CARB, 120 HP
VOLVO
71-73
3.500" (88.9 MM)
Cyl Bore:
121
AQ105A
3.500" (88.9 MM)
B20E
Stroke: 3.150" (80.000 MM)

2.1255-2.1260" (53.990-54.000 MM)
Rods:
2.4981-2.4986" (63.451-63.464 MM)
Main:
Main:
Comments:
GAS, AQ140A MARINE ENGINE
VOLVO
AQ95
AQ105A
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
#1 2.4977-2.4982" (63.442-63.454 MM)
Main:
Main:
C, C
Casting Numbers:
Comments:
EFI
(cont.)
3.313" (84.140 MM)
Stroke: 3.1496" (80. MM)

Cyl Bore:
2.1298-2.1304" (54.099-54.112 MM)
Rods:
2.4981-2.4986" (63.452-63.464 MM)
Main:
Main:
Comments:
GAS, ALSO AQ115A, AQ130A, AQ130B, AQ130C MARINE
Stroke: 3.150" (80.01 MM)

2.1230-2.1295" (53.924-54.089 MM)
Rods:
#1 2.4981-2.4987" (63.452-63.467 MM)
Main:
Main:
C, C
Casting Numbers:
Comments:
EFI
Engine Model
82-82
3.622" (91.999 MM)
B21

Make
Liter
CID
Vin
Model
Year
VOLVO
VOLVO
Stroke:
Rods:
4 Cylinders
2.3
141
131A
3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
2.1648-2.1653" (54.986-54.999 MM) *

Main:
Main:
2A37
Casting Numbers:
Comments:
VOLVO
Stroke:
Rods:
2.3
141
85-85
Cyl Bore:
3.780" (96.012 MM)
Rod Width:
.941-1.038" (23.901-26.365 MM)
Thrust Width:
1.142 @ #3
87
3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
VOLVO
(cont.)
131A
GAS, MARINE, 131B, 131C, 131D * MODEL 131C & 131D MAIN JOURN DIAM: 2.4798-2.4803
2.1648-2.1654" (54.986-55.001 MM)

Main:
Main:
2A37
Casting Numbers:
Comments:
MFI, B230FT, TURBO, SOHC, 740
Stroke:
Rods:
Engine Model
2.3
141
740
3.780" (96.012 MM)
Rod Width:
.941-1.038" (23.901-26.365 MM)
Thrust Width:
1.142 @ #3
88
3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
85-87
Cyl Bore:
740
86-94
B230FT
B230F
3.780" (96.012 MM)
Cyl Bore:
.941-1.038" (23.901-26.365 MM)

Rod Width:
2.4798-2.4803" (62.987-63. MM)
Main:
1.398 @ #5
Main:
Thrust Width:
Comments:
B230F, 740, 760, 240, 940 1988 CHANGE OF THRUST AND MAINS - SEE AERA TB 953
VOLVO
Stroke:
Rods:
2.3
141
87
3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
740
88-94
B230FT
3.780" (96.012 MM)
Cyl Bore:
.941-1.038" (23.901-26.365 MM)

Rod Width:
2.4798-2.4803" (62.987-63. MM)
Main:
1.398 @ #5
Main:
Thrust Width:
Comments:
MFI, B230FT, 740, 940, SOHC TURBO 1988 CHANGE OF THRUST AND MAINS SEE AERA TB #953
VOLVO
Stroke:
Rods:
2.3
141
89
3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
740
89-92
B234F
3.780" (96.012 MM)
Cyl Bore:
.941-1.038" (23.901-26.365 MM)

Rod Width:
#1 2.4798-2.4803" (62.987-63. MM)
Main:
1.398 ON R/MAIN
Main:
Thrust Width:
Comments:
DOHC, B234F, 740 GLE 1988 ENGINES CHANGE THRUST LOCATION FROM CENTER-REAR LOCATION,
AND FROM 1/2 WASHER-FLANGED BRG
VOLVO
2.3
141
87
Stroke: 3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
Rods:
2.4798-2.4803" (54.986-55.001 MM)
Main:
Main:
Comments:
EFI, TURBO 760 1/2 THRUST WASHER BLOCK
VOLVO
2.3
2.3
141
Stroke: 3.150" (80.01 MM)

1.9285-1.9293" (48.984-49.004 MM)
Rods:
2.1648-2.1654" (54.986-55.001 MM)
Main:
Main:
Comments:
AQ 131 OHC MARINE
VOLVO
2.3
Stroke: 3.150" (80.000 MM)

2.1255-2.1260" (53.990-54.000 MM)
Rods:
2.4980-2.4984" (63.450-6.460 MM)
Main:
Main:
Comments:
GAS, AQ145A MARINE ENGINE
84-84
3.780" (96.012 MM)
Thrust Width:
1.142 @ #3
141
AQ125B
Stroke: 3.150" (80.000 MM)

1.9285-1.9293" (48.984-49.005 MM)
Rods:
2.1648-2.1654" (54.987-55.000 MM)
Main:
Main:
Comments:
GAS, AQ125B, AQ145B MARINE ENGINES
VOLVO
760
Cyl Bore:
AQ131
Cyl Bore:
141
AQ125B
3.7795" (96.000 MM)
Cyl Bore:
AQ
74-74
465
AQ131
3.7795" (95.999 MM)
AQ145A
Cyl Bore:
B23FT
3.7795" (96.000 MM)
AQ145A

Make
Liter
CID
Vin
Model
VOLVO
4 Cylinders
2.3
VOLVO
Stroke:
Rods:
141
(1)
3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
2.4977-2.4982" (63.442-63.454 MM)

Main:
Main:
116, 192
Casting Numbers:
Comments:
B23
VOLVO
2.4
VOLVO
2.4
2.5
82-84
Rod Width:
.941-1.038" (23.901-26.365 MM)
Thrust Width:
1.142 @ #3
SNOUT LENGTH 1.500"
MD31
146
MD31
3.6226" (92.014 MM)
.154" (3.900 MM)
.154" (3.900 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
TMD31
152
TMD31
3.6226" (92.014 MM)
.154" (3.900 MM)
.154" (3.900 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
151A
85-85
3.780" (96.012 MM)

Stroke: 3.390" (86.106 MM)
Cyl Bore:
1.9285-1.9293" (48.984-49.004 MM)
Rods:
SEE 2.1648-2.1653" (54.986-54.999 MM) *
Main 1:
BELOW 2.4798-2.4803" (62.987-63. MM) **
Main:
Main 2:
Comments:
GAS, MARINE, 151B, 151C, 171A, 171C * MAIN JOURNAL DIAM FOR MODELS 151A,151B,171A
JOURNAL DIAM FOR MODELS 151C,171C
VOLVO
4.2
257
4.724" (119.99 MM)

2.7482-2.7500" (69.804-69.85 MM)
VOLVO
4.5
273
5.039" (127.991 MM)

2.7492-2.7500" (69.83-69.85 MM)
VOLVO
VOLVO
2.3
141
58
2.4
149
VOLVO
D45
4.1563-4.1567" (105.57-105.58 MM)
.128-.138" (3.251-3.505 MM)
1.728-1.732" (43.891-43.993 MM)
.128-.138" (3.251-3.505 MM)
1.8100-1.8120 @ #5
2.5
152
850
94-95
B5234T5
Cyl Bore:
3.1890-3.1905" (81.000-81.040 MM)
Thrust Width:
1.022-1.024" (25.960-26.000 MM)
Cyl Bore:
3.2677-3.2696" (83.000-83.048 MM)
Cyl Bore:
3.268" (83.007 MM)
57
Stroke: 3.543" (89.992 MM)

1.9685" (50. MM)
Rods:
2.5590" (64.999 MM)
Main:
Main:
Comments:
NON-TURBO, 850 ENGINE & VIN 55
Stroke: 3.543" (89.992 MM)

1.9685" (50. MM)
Rods:
2.5590" (64.999 MM)
Main:
Main:
Comments:
MFI
D42
4.156" (105.562 MM)
.128-.138" (3.251-3.505 MM)
1.728-1.732" (43.891-43.993 MM)
.128-.138" (3.251-3.505 MM)
1.810-1.812
5 Cylinders
Stroke: 3.5433" (90.000 MM)

1.9679-1.9685" (49.984-50.000 MM)
Rods:
2.5584-2.5592" (64.984-65.003 MM)
Main:
Main:
TURBO, 850
Comments:
VOLVO
** MAIN
D45
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.2491-3.2500" (82.527-82.55 MM)

Main:
Main:
Comments:
D45, TD45, D45 B,TD45 B DIESEL
151A
D42
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
3.2491-3.2500" (82.527-82.55 MM)

Main:
Main:
Comments:
D42, D42T DIESEL
Stroke:
Rods:
B23
3.780" (96.012 MM)
146
Stroke: 3.5433" (90. MM)

2.2239-2.2244" (56.487-56.5 MM)
Rods:
2.7554-2.7559" (69.987-70. MM)
Main:
Main:
Comments:
TURBO DIESEL, MARINE
VOLVO
(cont.)
Cyl Bore:
B23, SOHC 1/2 THRUST WASHER BLOCK @ #3 MAIN
Stroke: 3.5433" (90. MM)

2.2239-2.2244" (56.487-56.5 MM)
Rods:
2.7554-2.7559" (69.987-70. MM)
Main:
Main:
Comments:
DIESEL, MARINE, 31 SERIES
Stroke:
Rods:
Engine Model
Year
91-98
55
93-93
466
B5254S
B5254S

Make
Liter
CID
Vin
Model
Year
VOLVO
VOLVO
Engine Model
5 Cylinders
2.5
153
56
S70
(cont.)
98-04
B5254T
3.2977" (83.000 MM)

Stroke: 3.543" (90.000 MM)
Cyl Bore:
1.9679-1.9691" (49.984-50.016 mm)*
Rods:
2.5584-2.5597" (64.984-65.016 mm)*
Main:
Main:
S70, V70 XC, TURBO, AWD, 20V * THE VARIATION IN DIAMETER FOR EACH JOURNAL MUST NOT
Comments:
EXCEED .0003" (.008 MM)
VOLVO
VOLVO
6 Cylinders
2.4
145
77
Stroke: 3.400" (86.36 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
D-24 DIESEL, NON TURBO
Comments:
VOLVO
2.4
2.7
145
76
VOLVO
2.8
83-86
65
@ #4
B27F
170
76-79
B27F
3.465" (88.011 MM)
Cyl Bore:
90
3.5433" (90.000 MM)

1.9679-1.9691" (49.984-50.016 MM)
D24
3.012" (76.505 MM)
Thrust Width:
163
D24
@ #4
D-24
Cyl Bore:
Stroke: 2.874" (73. MM)

2.0577-2.0585" (52.266-52.286 MM)
Rods:
2.7576-2.7583" (70.043-70.061 MM)
Main:
Main:
Comments:
EFI, B27F
Stroke:
Rods:
81-84
3.012" (76.505 MM)
Thrust Width:
Stroke: 3.400" (86.36 MM)

1.8802-1.8810" (47.757-47.777 MM)
Rods:
2.2818-2.2826" (57.958-57.978 MM)
Main:
Main:
Comments:
D-24, OHC, TURBO, DIESEL
VOLVO
D-24
Cyl Bore:
S80
99-01
B6284T
3.1890-3.1902" (81.000-81.030 MM)
Cyl Bore:
1.0197-1.0276" (25.900-26.100 MM)

Rod Width:
2.5584-2.5592" (64.984-65.003 MM)
Main:
Main:
Comments:
TURBO, 24V AXIAL BEARING WIDTH DIMENSION: 1.0220-1.0252" (25.960-26.040 MM)
VOLVO
2.8
173
69
Stroke: 2.870" (72.898 MM)

2.3611-2.3618" (59.972-59.99 MM)
Rods:
#1 2.7575-2.7583" (70.041-70.061 MM)
Main:
Main:
Comments:
B280F, EFI, 760
VOLVO
2.9
178
VOLVO
2.9
178
VOLVO
3.0
178
Stroke: 3.543" (89.992 MM)

1.9685" (50. MM)
Rods:
2.5590" (64.999 MM)
Main:
Main:
Comments:
DOHC, MFI, 960
VOLVO
@ CENTER
960
3.0
B6304S
S80
02-05
B6294S
Cyl Bore:
3.2677-3.2689" (83.000-83.030 MM)
Rod Width:
1.0197-1.0276" (25.900-26.100 MM)
Thrust Width:
1.022-1.024"
95
960
Cyl Bore:
Stroke: 3.1496" (80. MM)

2.1298-2.1304" (54.099-54.112 MM)
Rods:
2.4981-2.4986" (63.452-63.464 MM)
Main:
Main:
Comments:
GAS, ALSO AQ170A MARINE
92-98
3.2677" (83. MM)
91
2.5584-2.5592" (64.984-65.003 MM)

Main:
Main:
Comments:
TURBO, 24V, S80
B280F
Thrust Width:
Cyl Bore:
3.543" (90.000 MM)

1.9683-1.9687" (49.996-50.004 MM)
80-91
3.5827-3.5839" (91.001-91.031 MM)
98
Stroke: 3.5433" (90. MM)

1.9685" (50. MM)
Rods:
2.5590" (64.999 MM)
Main:
Main:
Comments:
SOHC, MFI, 960
Stroke:
Rods:
760
Cyl Bore:
182
92-99
B6304F DOHC
3.2677-3.2696" (83.-83.048 MM)
AQ165A
Cyl Bore:
467
3.500-3.508" (88.9-89.103 MM)
AQ165A

Make
Liter
CID
Vin
Model
Year
VOLVO
VOLVO
6 Cylinders
3.0
182
B30E
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4981-2.4986" (63.452-63.464 MM)
Main:
Main:
FUEL INJECTION
Comments:
VOLVO
3.0
182
VOLVO
Stroke:
Rods:
3.6
3.504" (89.002 MM)
Cyl Bore:
3.504" (89.002 MM)
3.6
3.8
219
5.5
5.5
AQ175A
TD-B
VOLVO
5.5
TD
6.7
409
83-86
TD61
@ #7
80-92
3.875" (98.425 MM)
Thrust Width:
1.7313-1.7333
TD63
3.875" (98.430 MM)
Thrust Width:
1.7313-1.7333"
TD70F
Stroke: 5.118" (129.997 MM)

Cyl Bore:
2.7495-2.7500" (69.837-69.85 MM)
Rods:
3.2494-3.2500" (82.535-82.55 MM)
Main:
Main:
Thrust Width:
Comments:
TD70F, TD70FC DIESEL O.S. THRUST WASHERS AVLBL
468
TD61
TD63
Cyl Bore:
TD70F
TD60B
3.875" (98.425 MM)
Cyl Bore:
334
Stroke: 4.724" (120 MM)

2.4980-2.4985" (63.449-63.462 MM)
Rods:
2.9980-2.9985" (76.149-76.162 MM)
Main:
Main:
Comments:
TD63 SERIES O.S. THRUST WASHERS AVAILABLE
VOLVO
TD60B
Thrust Width:
Stroke: 4.724" (119.99 MM)

2.4980-2.4985" (63.449-63.462 MM)
Rods:
#1 2.9980-2.9985" (76.149-76.162 MM)
Main:
Main:
Comments:
TD61 SERIES O.S. THRUST WASHERS AVLBL
AQ175A
3.740" (94.900 MM)
Cyl Bore:
334
TMD41
3.6226" (92.014 MM)
.1535" (3.900 MM)
.1535" (3.900 MM)
Cyl Bore:
Stroke: 4.724" (119.99 MM)

2.4980-2.4985" (63.449-63.462 MM)
Rods:
#1 2.9980-2.9985" (76.149-76.162 MM)
Main:
Main:
Comments:
TD60B TURBO DIESEL
VOLVO
MD41
TMD41
229
334
1.416-1.421 *
3.6226" (92.014 MM)

.154" (3.900 MM)
.154" (3.900 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.480" (88.400 MM)

2.0988-2.0998" (53.310-53.330 MM)
Rods:
1 2.4484-2.4493" (62.189-62.210 MM)
Main 1:
2 & 3 2.4481-2.4490" (62.180-62.200 MM)
Main:
Main 2:
4 2.4479-2.4488" (62.177-62.199 MM)
Main 3:
Comments:
GAS, MARINE ENGINE
VOLVO
1.5335-1.5374" (38.951-39.05 MM)
MD41
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 3.5433" (90. MM)

2.2239-2.2244" (56.487-56.5 MM)
Rods:
2.7554-2.7559" (69.987-70.000 MM)
Main:
Main:
Comments:
TURBO DIESEL MARINE, 41 SERIES
VOLVO
TMD40
3.6226" (92.014 MM)
219
Stroke: 3.5433" (90. MM)

2.2239-2.2244" (56.487-56.5 MM)
Rods:
2.7554-2.7559" (69.987-70. MM)
Main:
Main:
Comments:
DIESEL, MARINE
VOLVO
B30F
MD40A
Cyl Bore:
Rod Width:
2.7554-2.7559" (69.987-70. MM)
Main:
Main:
Thrust Width:
Comments:
MARINE, & TMD40A, TAMD40A, TAMD40B * THRUST @ CENTER MAIN
3.6
B30E
74-75
219
3.5433" (90. MM)

2.2239-2.2244" (56.487-56.5 MM)
VOLVO
(cont.)
72-73
Cyl Bore:
B30F
Stroke: 3.150" (80.01 MM)

2.1255-2.1260" (53.988-54. MM)
Rods:
2.4981-2.4986" (63.452-63.464 MM)
Main:
Main:
Comments:
FUEL INJECTION
Engine Model
TD70F
4.1236-4.1256" (104.739-104.79 MM)
1.810-1.812 @#7

Make
Liter
CID
Vin
Model
VOLVO
VOLVO
6 Cylinders
6.7
409
TD
TD71
Stroke: 5.118" (129.997 MM)

Cyl Bore:
2.7495-2.7500" (69.837-69.85 MM)
Rods:
3.2494-3.2500" (82.535-82.55 MM)
Main:
Main:
Thrust Width:
TD71FA DIESEL, 71 SERIES O.S. THRUST WASHERS AVLBL
Comments:
VOLVO
6.7
409
6.7
VOLVO
9.6
VOLVO
Stroke:
Rods:
9.6
VED7
VOLVO
12.0
VOLVO
12.0
TD
VED7
4.125" (104.775 MM)
@ #7
100
TD100
4.7500-4.7514" (120.65-120.686 MM)
Cyl Bore:
Thrust Width:
@ #7
TD102
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
731
Stroke: 5.905" (149.987 MM)

3.6231-3.6237" (92.027-92.042 MM)
Rods:
4.2486-4.2495" (107.914-107.937 MM)
Main:
Main:
Comments:
TD121FE, FC, FB, TURBO DIESEL, N12
TD73
1.810-1.812" @ #7
586
3.9361-3.9370" (99.977-100. MM)

Main:
Main:
Comments:
TURBO DIESEL GB
TD71
1.810-1.812 @#7
Thrust Width:
Thrust Width:
5.512" (140.005 MM)

3.3859-3.3868" (86.002-86.025 MM)
88-92
4.1250" (104.775 MM)
Cyl Bore:
586
(cont.)
4.1250" (104.775 MM)
Cyl Bore:
409
Stroke: 5.118" (129.997 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
Comments:
DIESEL, DIR INJ
Stroke: 4.112" (104.445 MM)

3.3860-3.3865" (86.004-86.017 MM)
Rods:
3.9361-3.9370" (99.977-100. MM)
Main:
Main:
Comments:
TD100C, TD101GB DIESEL, DIRECT INJ
Engine Model
TD73
Stroke: 5.118" (129.997 MM)

2.7495-2.7500" (69.837-69.850 MM)
Rods:
3.2494-3.2500" (82.535-82.550 MM)
Main:
Main:
F75EAE
Casting Numbers:
Comments:
TURBO DIESEL O.S. THRUST WASHERS AVAILABLE
VOLVO
Year
TD102
4.750" (120.65 MM)
.148-.157" (3.759-3.988 MM)
2.122-2.126" (53.899-54. MM)
.148-.157
1.810-1.812
TD121
Thrust Width:
732
83-92
TD121
5.125" (130.175 MM)
Cyl Bore:
@ #7
TD122
TD122
5.906" (150.012 MM)

3.6230-3.6240" (92.024-92.05 MM)
5.125" (130.175 MM)

Cyl Bore:
.171-.181" (4.343-4.597 MM)
Rod Fillet:
2.1614-2.1654" (54.9-55.001 MM)
Rod Width:
4.2490-4.2500" (107.925-107.95 MM)
.171-.181" (4.343-4.597 MM)
Main:
Main Fillet:
1.810-1.812" *
Main:
Thrust Width:
Comments:
TURBO DIESEL * THRUST BRG THKNS .1236-.1264", .004,.008,.012" O.S. AVAILABLE
Stroke:
Rods:
VOLVO
Stroke:
Rods:
12.1
740
5.9055" (150. MM)

3.6210-3.6220" (91.973-91.999 MM)
4.2510-4.2520" (107.975-108.001 MM)

Main:
Main:
Comments:
DIESEL, DIR INJ
VOLVO
16.1
VED12
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
983
TD162
6.4960" (165.000 MM)

3.9364-3.9370" (99.984-100.000 MM)
VED12
5.1570" (130.988 MM)
.1476-.1574" (3.749-3.998 MM)
2.2400-2.2440" (56.896-56.998 MM)
.147-.157"
1.849-1.851" (46.975-47.025 MM)
TD162
5.6690" (144.000 MM)

Cyl Bore:
.2118" (5.380 MM)
Rod Fillet:
2.3583-2.3622" (59.900-60.000 MM)
Rod Width:
4.6448-4.6457" (117.978-118.000 MM)
.2069-.2167" (5.255-5.505 MM)
Main:
Main Fillet:
2.0069-2.0089" (50.975-51.025 MM)
Main:
Thrust Width:
Comments:
TURBO DIESEL, TD162KA THRUST WASHER THKNS .1235-.1265" (3.137-3.213 MM)
Stroke:
Rods:
469

Make
Liter
CID
Vin
Model
Year
VOLVO
8 Cylinders
5.0
VOLVO
302
Stroke: 3.000" (76.000 MM)

2.1228-2.1236" (53.910-53.930 MM)
Rods:
2.2482-2.2490" (57.100-57.120 MM)
Main:
Main:
GAS, MARINE
Comments:
5.0
VOLVO
5.0
VOLVO
AQ190A
305
211A
AQ200A
4 Cylinders
0.0
Stroke: 5.000" (127. MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
130011-D
Casting
0.0
6AB
.115-.135" (2.921-3.429 MM)
.115-.135" (2.921-3.429 MM)
ALSO 6HB, 6RB, 6RBR
WAUKESHA
0.0
CHS
CHS
.115-.135" (2.921-3.429 MM)
.115-.135" (2.921-3.429 MM)
Rod Fillet:
Main Fillet:
ALSO CHK
WAUKESHA
0.0
Stroke: 4.000" (101.6 MM)

1.8100-1.8110" (45.974-45.999 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main: Numbers:
68111
Casting
FCB
FCB
.080-.110" (2.032-2.794 MM)
.080-.110" (2.032-2.794 MM)
Rod Fillet:
Main Fillet:
MODEL FCB
WAUKESHA
0.0
Stroke: 6.510" (165.354 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main: Numbers:
9811
Casting
Comments:
ALSO HBSH, HBKH
WAUKESHA
0.0
HL
HBSH, HBKH
.115-.135" (2.921-3.429 MM)
.115-.135" (2.921-3.429 MM)
Rod Fillet:
Main Fillet:
Stroke: 3.126" (79.4 MM)

1.5600-1.5610" (39.624-39.649 MM)
Rods:
#1 1.3782-1.3787" (35.006-35.019 MM)
Main:
Main: Numbers:
122111
Casting
Comments:
6AB
Rod Fillet:
Main Fillet:
Stroke: 6.000" (152.4 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
2.9990-3.0000" (76.175-76.2 MM)
Main:
Main: Numbers:
40011
Casting
Comments:
130GS
.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
Rod Fillet:
Main Fillet:
Stroke: 5.750" (146.05 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main: Numbers:
8511-G
Casting
Comments:
130GS
MODELS 130GS, 130GL, 130HS, 130HL
WAUKESHA
Comments:
AQ200A
3.875" (98.430 MM)
Cyl Bore:
WAUKESHA
WAUKESHA
211A
3.735" (94.869 MM)
Cyl Bore:
307
Stroke: 3.250" (82.550 MM)

2.100" (53.340 MM)
Rods:
2.4479-2.4490" (62.180-62.200 MM)
Main:
Main:
Comments:
GAS, MARINE, ALSO AQ200B, AQ225A, & AQ225B
AQ190A
4.000" (101.600 MM)
Cyl Bore:
Stroke: 3.480" (88.392 MM)

1 2.4484-2.4493" (62.189-62.210 MM)
Main 1:
2 & 3 2.4481-2.4490" (62.180-62.200 MM)
Main:
Main 2:
4 2.4479-2.4488" (62.177-62.199 MM)
Main 3:
5 2.0988-2.0998" (53.310-53.330 MM)
Main 4:
Comments:
GAS, MARINE, ALSO 231A, AQ200D & AQ225D
Comments:
Engine Model
ICKB
ICKB
.125-.156" (3.175-3.962 MM)
.109-.141
Rod Fillet:
Main Fillet:
MODEL ICKB BALL BEARING MAINS
WAUKESHA
0.0
Stroke: 5.250" (133.35 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
66011, 66011-A
Casting Numbers:
Comments:
MODELS VIH, VRZ, VBZH, VRZH, VIK, VIKHU
VIH
Cyl Bore:
Rod Fillet:
470
VIH,VRZ,VBZH
5.250" (133.35 MM)
.115-.135" (2.921-3.429 MM)

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
4 Cylinders
0.0
VIL
Stroke: 5.250" (133.35 MM)

2.3740-2.3750" (60.3-60.325 MM)
Rods:
2.3740-2.3750" (60.3-60.325 MM)
Main:
Main:
30011
Casting Numbers:
Comments:
0.0
XBKH
MODEL XBKH * CENTER MAIN RADIUS
WAUKESHA
1.0
61
ICK
WAUKESHA
1.9
113
WAUKESHA
2.0
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
121
2.1
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
125
121
3.313" (84.15 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.6310
180GB
Stroke: 3.750" (95.25 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
#1 2.2450-2.2460" (57.023-57.048 MM)
Main:
Main: Numbers:
182011, 182111
Casting
180GB
3.250" (82.55 MM)
.109" (2.769 MM)
.109" (2.769 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
MILITARY STD
WAUKESHA
2.2
133
180DLC
Stroke: 4.000" (101.6 MM)

1.7490-1.7500" (44.425-44.45 MM)
Rods:
#1 2.1240-2.1250" (53.95-53.975 MM)
Main:
Main:
24504, BD14A, BD14K, K24504
Casting Numbers:
Comments:
GAS, ALSO FCS, FCL, FCX, STARTER ENGINE
WAUKESHA
2.4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
144
FCS, FCL, FCX
3.2503-3.2507" (82.558-82.568 MM)

.094" (2.388 MM)
.094" (2.388 MM)
1.500
180DLC
Stroke: 3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
181411
Casting
180DLC
3.500" (88.9 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
DIESEL THRUST FLANGE WIDTH .083-.085
WAUKESHA
2.4
144
180GL
Stroke: 3.750" (95.25 MM)

1.9990-2.0000*" (50.775-50.8 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
180111, 181411
Casting
180GLB, 180GS
3.500" (88.9 MM)
.094-.125" (2.388-3.175 MM)
.094-.125
Cyl Bore:
Rod Fillet:
Main Fillet:
ALSO 180GLB, 180GS, 180DLB, 180DLC *ALSO HAS ROD JOURNAL DIAM 2.2490-2.2500
WAUKESHA
Stroke:
Rods:
113
3.000" (76.2 MM)
.094" (2.388 MM)
.094" (2.388 MM)
1.5000
121
Stroke: 3.500" (88.9 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
181411A
Casting Numbers:
WAUKESHA
ICK
2.500" (63.5 MM)
.109-.141" ROLLED (2.769-3.581 MM)
.109-.141" ROLLED (2.769-3.581 MM)
113
Stroke: 4.000" (101.6 MM)

1.7490-1.7500" (44.425-44.45 MM)
Rods:
#1 2.1240-2.1250" (53.95-53.975 MM)
Main:
Main:
BD14A, BD14A, BD14K, K24504
Casting Numbers:
Comments:
XBKH
.053-.073" (1.346-1.854 MM)
.063-.094 *
Rod Fillet:
Main Fillet:
Stroke: 3.125" (79.375 MM)

Cyl Bore:
1.5620-1.5630" (39.675-39.7 MM)
Rods:
Rod Fillet:
#1 1.3782-1.3787" (35.006-35.019 MM)
Main:
Main Fillet:
Main: Numbers:
121111, 121111AF, 121111C, 121111F, 121111M
Casting
Comments:
VIL, VIM, VIS
VIL, VIM, VIS
WAUKESHA
Comments:
(cont.)
.115-.135" (2.921-3.429 MM)
Rod Fillet:
Stroke: 4.750" (120.65 MM)

2.1240-2.1250" (53.95-53.975 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
22011
Casting
Comments:
Engine Model
2.5
3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
Comments:
D-155G GAS, CLARK FORKLIFTS
155
155
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
471
D-155G
3.6523-3.6257" (92.768-92.093 MM)
.109" (2.769 MM)
1.3750-1.3790" (34.925-35.027 MM)
.109
1.6275-1.6295

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
Stroke:
Rods:
4 Cylinders
2.5
155
GA
3.750" (95.25 MM)

1.7490-1.7500" (44.425-44.45 MM)
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
D-155GA GAS, CLARK FORKLIFTS
Comments:
WAUKESHA
Stroke:
Rods:
2.5
155
Rod Width:
1.2465-1.2505" (31.661-31.763 MM)
Thrust Width:
1.6275-1.6295
155
#1 2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
181411A
Casting Numbers:
Comments:
VRD155D, DIESEL, CLARK FORKLIFTS, MILLERS WELDERS
2.5
WAUKESHA
Stroke:
Rods:
2.5
155
2.5
Cyl Bore:
3.625" (92.075 MM)
Main Fillet:
.125
155
VRD155
3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
WAUKESHA
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
155
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
WAUKESHA
2.9
176
4.250" (107.95 MM)

1.7490-1.7500" (44.425-44.45 MM)
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
Comments:
D-176GA GAS, CLARK FORKLIFTS
WAUKESHA
2.9
176
Stroke: 3.750" (95.25 MM)

1.7490-1.7500" (44.425-44.45 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
220511A
Casting Numbers:
Comments:
D176G, GAS
WAUKESHA
2.9
WAUKESHA
3.0
Stroke: 4.510" (114.554 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
1.9990-2.0000" (50.775-50.8 MM)
Main:
Main: Numbers:
19111-B
Casting
Comments:
MODEL XAH
VRD155
VRG155
3.625" (92.075 MM)

.109" (2.769 MM)
1.3750-1.3790" (34.925-35.027 MM)
.109
1.6275-1.6295
176
D-176GA
Cyl Bore:
3.6255-3.6265" (92.088-92.113 MM)
Rod Width:
1.3750-1.3790" (34.925-35.027 MM)
Thrust Width:
1.6275-1.6295
D176G
180
D176G
3.625" (92.075 MM)
Cyl Bore:
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
Comments:
180SB
180GKB
3.6253-3.6257" (92.083-92.093 MM)

.109" (2.769 MM)
1.375" (34.925 MM)
.109
1.6275-1.6295
VRG155
4.250" (107.95 MM)

2.2490-2.2500" (57.125-57.15 MM)
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
181411A
Casting Numbers:
Comments:
GAS, CLARK FORKLIFTS, SAME AS 180 EXCEPT RMB SEAL
Stroke:
Rods:
VRD155D
3.625" (92.075 MM)
.109" (2.769 MM)
1.3750" (34.925 MM)
.109
1.6275-1.6295
180GKB
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
181411A
Casting Numbers:
Comments:
DIESEL, VR SERIES
Stroke:
Rods:
D-155GA
3.6253-3.6257" (92.083-92.093 MM)
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
Stroke: 3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
Comments:
MODEL 180GKB
(cont.)
Cyl Bore:
155
3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
WAUKESHA
Engine Model
180SB
186
180SB
3.313" (84.15 MM)
Cyl Bore:
XAH
Rod Fillet:
Main Fillet:
472
XAH
.053-.073" (1.346-1.854 MM)
.053-.073

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
4 Cylinders
3.2
194
180DL
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main: Numbers:
181211
Casting
Comments:
180DL, 180DAC
DIESEL 180DL, 180DAC THRUST FLANGE WIDTH .083-.085
WAUKESHA
3.6
220
VR
WAUKESHA
3.6
WAUKESHA
3.6
220
3.6
VR(1)
220
220
2.9974-2.9984" (76.134-76.159 MM)

Main:
Main:
216011
Casting Numbers:
Comments:
DIESEL
VR-220
3.875" (98.425 MM)
VRD220
3.8750-3.8760" (98.425-98.45 MM)
Rod Width:
1.3750-1.3790" (34.925-35.027 MM)
Thrust Width:
1.5025-1.5045
VRG220
3.8750-3.8760" (98.425-98.45 MM)
Thrust Width:
1.5025-1.5045
6 Cylinders
0.0
Stroke: 7.000" (177.8 MM)

3.2490-3.2500" (82.525-82.55 MM)
Rods:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main:
96011-A
Casting Numbers:
.125-.156" (3.175-3.962 MM)

.188-.219
0.0
6GAL
6GAL
.125-.156" (3.175-3.962 MM)
.125-.156" (3.175-3.962 MM)
Rod Fillet:
Main Fillet:
ALSO 6GAK
WAUKESHA
0.0
Stroke: 8.500" (215.9 MM)

4.3740-4.3750" (111.1-111.125 MM)
Rods:
4.6865-4.6875" (119.037-119.063 MM)
Main:
Main: Numbers:
46011-A
Casting
6LROR
6LROR, 6LROR
.250-.281" (6.35-7.137 MM)

.250-.281" (6.350-7.137 MM)
Rod Fillet:
Main Fillet:
ALSO 6LRORB
WAUKESHA
0.0
Stroke: 8.500" (215.9 MM)

4.9990-5.0000" (126.975-127. MM)
Rods:
5.4990-5.5000" (139.675-139.7 MM)
Main:
Main: Numbers:
47011-A, 47111, 47111-B
Casting
Comments:
6EL
ALSO 6EK, 6EH, 6EKH
WAUKESHA
Comments:
6EL
Rod Fillet:
Main Fillet:
Stroke: 5.500" (139.7 MM)

3.1865-3.1875" (80.937-80.963 MM)
Rods:
3.9990-4.0000" (101.575-101.6 MM)
Main:
Main: Numbers:
84611
Casting
Comments:
VRG220
Cyl Bore:
WAUKESHA
WAUKESHA
VRD220
Cyl Bore:
220
Stroke: 4.690" (119.126 MM)

2.4360-2.4370" (61.874-61.9 MM)
Rods:
2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
Comments:
GAS
VR-220
3.875" (98.425 MM)
Cyl Bore:
4.690" (119.126 MM)

2.4360-2.4370" (61.874-61.9 MM)
WAUKESHA
220
Cyl Bore:
Stroke: 4.665" (118.491 MM)

2.4360-2.4370" (61.874-61.9 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
216011
Casting Numbers:
Comments:
VR-220 GAS, OHV
Comments:
(cont.)
3.313" (84.15 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 4.665" (118.491 MM)

2.4360-2.4370" (61.874-61.9 MM)
Rods:
#1 2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
216011
Casting Numbers:
Comments:
VR-220 DIESEL, OHV
Stroke:
Rods:
Engine Model
6LRZ
Rod Fillet:
Main Fillet:
ALSO 6LRZB, 6LRDB, 6LRD, 6LRDBS, 6LRDBSM, 6LRDS
473
6LRZ
.250-.281" (6.35-7.137 MM)
.250-.281" (.250-.281 MM)

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
0.0
Stroke: 8.500" (215.9 MM)

3.9990-4.0000" (101.575-101.6 MM)
Rods:
4.2490-4.2500" (107.925-107.95 MM)
Main:
Main: Numbers:
12111, 12111-F
Casting
Comments:
6LS
.188-.219" (4.775-5.563 MM) *
.188-.219" (4.775-5.563 MM) *
ALSO 6LK, 6LRH, 6LRO * MODEL 6LRO F/R .250-.280 ROD & MAIN
WAUKESHA
0.0
6MKR
6MKR
.115-.135" (2.921-3.429 MM)
.115-.135" (2.921-3.429 MM)
Rod Fillet:
Main Fillet:
ALSO 6MZR, 6MZA
WAUKESHA
0.0
Stroke: 4.750" (120.65 MM)

2.2480-2.2490" (57.099-57.125 MM)
Rods:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main: Numbers:
61011
Casting
Comments:
(cont.)
6LS
Rod Fillet:
Main Fillet:
Stroke: 4.750" (120.65 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
35311
Casting
Comments:
Engine Model
6MZB
6MZB
.115-.135" (2.921-3.429 MM)
.115-.135" (2.921-3.429 MM)
Rod Fillet:
Main Fillet:
MODEL 6MZB
WAUKESHA
0.0
Stroke: 8.500" (215.9 MM)

3.2490-3.2500" (82.525-82.55 MM)
Rods:
3.7490-3.7500" (95.225-95.25 MM)
Main:
Main:
95011-A
Casting Numbers:
Comments:
ALSO 6NKH
WAUKESHA
6NK
.188-.219" (4.775-5.563 MM)
.188-.219" (4.775-5.563 MM)
Rod Fillet:
Main Fillet:
0.0
6WAKR
Stroke: 6.470" (164.338 MM)

3.7490-3.7500" (95.225-95.25 MM)
Rods:
Rod Fillet:
4.7490-4.7500" (120.625-120.65 MM)
Main:
Main Fillet:
Main: Numbers:
125211-D, 125211-E
Casting
Comments:
ALSO 6WAKDBM, 6WAKDBS, 6WAKDBSM, 6WAKD, 6WAKDS
WAUKESHA
0.0
6NK,6NKH
6WAKR
.156-.188" (3.962-4.775 MM)

.188-.219
VRD
VRD
221411
Casting Numbers:
Comments:
155, 220(S), 232, 265, 283, 310, 330(S)
WAUKESHA
3.0
185
Stroke: 4.500" (114.3 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 1.9990-2.0000" (50.775-50.8 MM)
Main:
Main:
19111, 7711
Casting Numbers:
WAUKESHA
3.2
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
194
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
186211
Casting Numbers:
Comments:
ALSO 185DL
WAUKESHA
3.2
Comments:
185DAC
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
194
Stroke: 3.750" (95.25 MM)

2.1225-2.1235" (53.912-53.937 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main: Numbers:
187011
Casting
3.625" (92.075 MM)

.094" (2.388 MM)
.094
2.503
185GB
185GB
Cyl Bore:
Rod Fillet:
Main Fillet:
3.313" (84.15 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
3.313" (84.15 MM)

.109" (2.769 MM)
.109
1.629
MODEL 185GB
WAUKESHA
3.2
Stroke: 3.750" (95.25 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2490-2.2500" (57.125-57.15 MM)
Main:
Main:
185111
Casting Numbers:
194
474
185DAC
3.313" (84.15 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
1.629

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
3.4
209
Stroke: 3.750" (95.25 MM)

2.1225-2.1235" (53.912-53.937 MM)
Rods:
2.2435-2.2445" (56.985-57.01 MM)
Main:
Main: Numbers:
187111
Casting
Comments:
Engine Model
185GM
(cont.)
185GM
3.438" (87.325 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
MILITARY STD
WAUKESHA
3.5
216
185GL
185GLB, 185GS
3.500" (88.9 MM)

Stroke: 3.750" (95.25 MM)
Cyl Bore:
1.9990-2.0000" (50.775-50.8 MM) *
.094-.125" (2.388-3.175 MM)
Rods:
Rod Fillet:
2.2490-2.2500" (57.125-57.15 MM)
.094-.125" (2.388-3.175 MM)
Main:
Main Fillet:
1.629
Main:
Thrust Width:
185111, 186311
Casting Numbers:
Comments:
ALSO 185GLB, 185GS, 185DLB * 185-GLB ROD JOURNAL DIAM 2.2490-2.2500
WAUKESHA
3.7
228
Stroke: 4.250" (107.95 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.2640-2.6250" (57.506-66.675 MM)
Main:
Main:
90111
Casting Numbers:
Comments:
MODELS 6BL, 6BM, 6BR, 6BZ, 6BKH
WAUKESHA
Stroke:
Rods:
3.8
232
3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
WAUKESHA
3.8
4.0
245
Stroke: 4.250" (107.95 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
90111
Casting
Comments:
6BL
3.500" (88.9 MM)
.109" (2.769 MM)
.094-.125
WAUKESHA
4.3
265
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
191311, 192211, 195311
Casting
Comments:
VRG232
3.625" (92.075 MM)

.109" (2.769 MM)
1.375" (34.925 MM)
.109
1.6275-1.6295
6BL
Cyl Bore:
Rod Fillet:
Main Fillet:
VRD232
3.625" (92.075 MM)

.109" (2.769 MM)
1.375" (34.925 MM)
.109
1.6275-1.6295
VRG232
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
181411A
Casting Numbers:
Comments:
GAS, VR SERIES, OLIVER 88, 550
WAUKESHA
VRD232
232
3.750" (95.25 MM)

2.2490-2.2500" (57.125-57.15 MM)
6BL
3.375" (85.725 MM)
.109" (2.769 MM)
.094-.125
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
2.2490-2.2500" (57.125-57.15 MM)

Main:
Main:
181411A
Casting Numbers:
Comments:
DIESEL, VR SERIES
Stroke:
Rods:
6BL
Cyl Bore:
Rod Fillet:
Main Fillet:
190DLC
Cyl Bore:
Rod Fillet:
Main Fillet:
190DLC
3.750" (95.25 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
DIESEL THRUST FLG THICK .093-.095
WAUKESHA
4.3
265
190GL
190GL
3.750" (95.25 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
.094-.125" (2.388-3.175 MM)
Rods:
Rod Fillet:
2.6240-2.6250" (66.65-66.675 MM)
.094-.125" (2.388-3.175 MM)
Main:
Main Fillet:
1.7525-1.7545
Main:
Thrust Width:
180107, 190107, 190111
Casting Numbers:
Comments:
GAS, ALSO 190GK, GS *190-GLB ROD JOURNAL DIAMETER: 2.4365-2.4375
WAUKESHA
4.3
Stroke: 4.000" (101.6 MM)

2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
191311, 195311
Casting Numbers:
Comments:
GAS, ALSO 190DLB, DLC
265
190GLB
Cyl Bore:
3.750" (95.25 MM)
Main Fillet:
Thrust Width:
.125
1.7525-1.7545
475
190GLB

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
4.3
265
Stroke: 4.000" (101.6 MM)

2.2475-2.2485" (57.087-57.112 MM)
Rods:
2.6230-2.6240" (66.624-66.65 MM)
Main:
Main: Numbers:
190211
Casting
Comments:
190GLC
4.3
265
VRD
62-64
VRD
3.7500-3.7515" (95.25-95.288 MM)

.109" (2.769 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
VRD, DIESEL, 1600 OLIVER TRACTOR
WAUKESHA
4.3
265
VRG265
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
GAS, VR SERIES, 880, 1600, 1650 OLIVER TRACTORS
WAUKESHA
4.6
282
Stroke: 4.250" (107.95 MM)

1.9990-2.0000" (50.775-50.8 MM)
Rods:
#1 2.6240-6.250" (66.65-158.75 MM)
Main:
Main: Numbers:
90111
Casting
53-64
3/32
1.7525-1.7545
6BL
Cyl Bore:
Rod Fillet:
Main Fillet:
VRG265
3.750" (95.25 MM)
6BL, 6BM, 6BR

3.750" (95.25 MM)
.094-.125" (2.388-3.175 MM)
.094-.125
WAUKESHA
Stroke:
Rods:
190GLC
MILITARY STD, ALSO 180, 185, 190
WAUKESHA
Comments:
(cont.)
3.750" (95.25 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 4.250" (107.95 MM)

2.4365-2.4375" (61.887-61.913 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
192211B, 195311, 195311B, 90111
Casting
Comments:
Engine Model
4.6
283
3.750" (95.25 MM)

2.4365-2.4375" (61.887-61.913 MM)
2.6240-2.6250" (66.65-66.675 MM)

Main:
Main:
221211, 221211C
Casting Numbers:
Comments:
DIESEL, VR SERIES, OLIVER 1600, 1650 & 1655
WAUKESHA
4.6
283
Stroke: 3.750" (95.25 MM)

2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
Comments:
GAS, VR SERIES THRUST BRG WIDTH 1.495-1.498
WAUKESHA
4.7
5.0
WAUKESHA
5.0
VRG283
3.875" (98.425 MM)
Thrust Width:
1.5025-1.5045
F2895G
302
195DLC
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
302
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
190111, 191311, 192211B, 195311, 195311B
Casting Numbers:
Comments:
MODEL 195-GL
F2895G
195DLC
4.000" (101.6 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
1.754
195GL
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
476
VRG283
8.500" (215.9 MM)
Cyl Bore:
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
191311, 192211, 192211B, 195311, 195311B
Casting Numbers:
Comments:
ALSO 195DLCA
VRD283
3.8753-3.8757" (98.433-98.443 MM)

.109" (2.769 MM)
1.375" (34.925 MM)
.109
1.5025-1.5045
Cyl Bore:
289
Stroke: 8.500" (215.9 MM)

5.7490-5.7500" (146.025-146.05 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main:
Comments:
F2895G
WAUKESHA
VRD283
Cyl Bore:
Rod Fillet:
Rod Width:
Main Fillet:
Thrust Width:
195GL
4.000" (101.6 MM)
.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
1.754

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
5.0
302
Stroke: 4.000" (101.6 MM)

2.2475-2.2485" (57.087-57.112 MM)
Rods:
#1 2.6230-2.6240" (66.624-66.65 MM)
Main:
Main:
190211, 192211B, 195311, 195311B
Casting Numbers:
Comments:
195GLC
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
(cont.)
195GLC
4.000" (101.6 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
1.754
MILITARY STD
WAUKESHA
5.0
302
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
193011
Casting
Comments:
Engine Model
197DLC
Cyl Bore:
Rod Fillet:
Main Fillet:
197DLC
4.000" (101.6 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
ALSO 197DLCS
WAUKESHA
5.1
310
VRD310
VRD310
3.8753-3.8757" (98.433-98.443 MM)

Stroke: 4.375" (111.125 MM)
Cyl Bore:
2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
1.5025-1.5045
Main:
Thrust Width:
221411
Casting Numbers:
Comments:
VR SERIES DIESEL, 1755, 1855 OLIVER THRUST BRG THKNS 1.495-1.498
WAUKESHA
5.1
310
VRG310
Stroke: 3.750" (95.25 MM)

Cyl Bore:
2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
Thrust Width:
221411
Casting Numbers:
Comments:
GAS, VR SERIES, 1850 OLIVER THRUST BRG WIDTH 1.495-1.498
WAUKESHA
5.2
320
WAUKESHA
5.2
320
WAUKESHA
5.2
WAUKESHA
5.4
330
WAUKESHA
5.4
WAUKESHA
5.7
Stroke: 8.500" (215.9 MM)

5.7490-5.7500" (146.025-146.05 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main:
Comments:
F3521G
VRD330
330
195GKU
4.125" (104.775 MM)
VRD330
3.858" (97.993 MM)
Cyl Bore:
Stroke: 4.665" (118.491 MM)

2.4360-2.4370" (61.874-61.9 MM)
Rods:
2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
Comments:
GAS
195GKA
4.125" (104.775 MM)

.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
1.754
195GKU
Cyl Bore:
Stroke: 4.685" (118.999 MM)

2.4360-2.4370" (61.874-61.9 MM)
Rods:
2.9974-2.9984" (76.134-76.159 MM)
Main:
Main:
Comments:
DIESEL
195GK
4.125" (104.775 MM)
.094-.125" (2.388-3.175 MM)
.094-.125" (2.388-3.175 MM)
1.754
195GKA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
320
Stroke: 4.000" (101.6 MM)

2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
Comments:
195GKU, XAH
1.5025-1.5045
195GK
Stroke: 4.000" (101.6 MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM) *
Rods:
Rod Fillet:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main Fillet:
Main:
Thrust Width:
191311, 191311, 192211B, 195311, 195311B
Casting Numbers:
Comments:
MODEL 195GK *ALSO HAS ROD DIAM OF 2.4365-2.4375
Stroke: 4.000" (101.6 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
191311, 192211, 192211B, 195311, 195311B
Casting Numbers:
Comments:
MODEL 195GKA
VRG310
3.875" (98.425 MM)
VRG330
VRG330
Cyl Bore:
3.8750-3.8760" (98.425-98.45 MM)
Thrust Width:
1.5025-1.5045
Cyl Bore:
9.375" (238.125 MM)
352
F3521G
477

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
5.8
6.2
6.6
7.0
4.000" (101.6 MM)

.094" (2.388 MM)
Thrust Width:
2.753
Cyl Bore:
Rod Fillet:
Main Fillet:
4.125" (104.775 MM)

.094" (2.388 MM)
.125
404
MZA
Stroke: 4.750" (120.65 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
82011
Casting Numbers:
Comments:
MZA
WAUKESHA
Cyl Bore:
Rod Fillet:
380
Stroke: 4.750" (120.65 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main: Numbers:
82011
Casting
WAUKESHA
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
426
7.0
426
7.3
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
447
7.4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
451
7.4
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
451
7.6
462
WAUKESHA
8.2
501
135GZU
4.375" (111.125 MM)
Cyl Bore:
6SRLR
Stroke: 5.125" (130.175 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
17011, 17011B, 17311A, 173311A
Casting Numbers:
Comments:
MODELS 6SRLR, 6SRKR
Stroke: 5.250" (133.35 MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
Comments:
V ENGINE
135GZ
4.375" (111.125 MM)
.094-.125" (2.388-3.175 MM)
.125-.156
2.503
135GZU
Stroke: 5.000" (127. MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
Comments:
135GZU
WAUKESHA
6SRLR
4.125" (104.775 MM)
.094-.125" (2.388-3.175 MM)
.094-.125
3.002
135GZ
Stroke: 5.000" (127. MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
01355011D, 135011, 135011K, 135111A
Casting Numbers:
Comments:
135 SERIES, 135GZB
WAUKESHA
135GK
4.250" (107.95 MM)
.094-.125" (2.388-3.175 MM)
.125-.156
2.503
6SRLR
Stroke: 5.125" (130.175 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
17011, 17011B, 17311A, 173311A
Casting Numbers:
Comments:
MODELS 6SRLR, 6SRKR
WAUKESHA
135DK
4.250" (107.95 MM)
.094-.125" (2.388-3.175 MM)
.125-.156
2.503
135GK
Stroke: 5.000" (127. MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
01355011D, 135011, 135011K, 135011L
Casting Numbers:
Comments:
135 SERIES, 135GKB
WAUKESHA
MZA
4.250" (107.95 MM)
.094" (2.388 MM)
.125
2.753
135DK
Stroke: 5.000" (127. MM)

Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
Rods:
Rod Fillet:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main Fillet:
Main:
Thrust Width:
01355011D, 135011, 135011K, 135011L
Casting Numbers:
Comments:
135 SERIES, 135DKB, 135DKBS, 135DKBM, 135DKBSM
WAUKESHA
(cont.)
358
Stroke: 4.750" (120.65 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
#1 2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
82011
Casting Numbers:
WAUKESHA
Engine Model
6SRLR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
4.375" (111.125 MM)

.094-.125" (2.388-3.175 MM)
.094-.125
3.002
Cyl Bore:
4.500" (114.3 MM)
V ENGINE
478

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
8.6
525
140
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
#1 3.2490-3.2500" (82.525-82.55 MM)
Main:
Main Fillet:
Main:
Thrust Width:
140111B, 140111C, 140111J, 140211D, 140311, 140311A
Casting Numbers:
Comments:
(cont.)
140
4.500" (114.3 MM)

.141-.156" (3.581-3.962 MM)
.141-.156
3.005
140
WAUKESHA
8.6
525
140GK
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main Fillet:
Main:
Thrust Width:
140111B, 140111C, 140111J, 140211D, 140311, 140311A
Casting Numbers:
Comments:
140G SERIES, MODELS 140GS,140HS,140HK,140GK,140GKB
WAUKESHA
8.7
525
Stroke: 5.125" (130.175 MM)

2.7490-2.7500" (69.825-69.85 MM)
Rods:
#1 2.9990-3.0000" (76.175-76.2 MM)
Main:
Main:
17011, 17011B, 17311A, 173311A
Casting Numbers:
Comments:
MODELS 6SRLR, 6SRKR, GKB
WAUKESHA
9.1
554
WAUKESHA
9.1
6SRLR
4.625" (117.475 MM)
.094-.125" (2.388-3.175 MM)
.094-.125
3.002
140GZ
554
Stroke: 5.500" (139.7 MM)

2.6240-2.6250" (66.65-66.675 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main: Numbers:
140111M
Casting
140GK
4.500" (114.3 MM)
.141-.156" (3.581-3.962 MM)
.141-.156" (3.581-3.962 MM)
3.005
6SRLR
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main Fillet:
Main:
Thrust Width:
140111B, 140111C, 140111J, 140211D, 140311, 140311A
Casting Numbers:
Comments:
140G AND F554G SERIES, 140GS, 140HS, 140HK, 140GKB
Comments:
Engine Model
140GZ
4.625" (117.475 MM)
.141-.156" (3.581-3.962 MM)
.141-.156" (3.581-3.962 MM)
3.005
140GZC
Cyl Bore:
Rod Fillet:
Main Fillet:
140GZC
4.625" (117.475 MM)

.141-.156" (3.581-3.962 MM)
.141-.156" (3.581-3.962 MM)
MODEL 140GZC
WAUKESHA
9.1
554
F554G
Stroke: 5.500" (139.7 MM)

Cyl Bore:
2.6240-2.6250" (66.65-66.675 MM)
Rods:
Rod Fillet:
#1 3.2490-3.2500" (82.525-82.55 MM)
Main:
Main Fillet:
Main:
Thrust Width:
140111B, 140111C, 140111J, 140211D, 140311, 140311A
Casting Numbers:
Comments:
F554G
WAUKESHA
10.5
638
F554G
4.625" (117.475 MM)
.141-.156" (3.581-3.962 MM)
.141-.156
3.005
145GS
145GS
4.750" (120.65 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
.141-.156" (3.581-3.962 MM)
Rods:
Rod Fillet:
#1 3.4990-3.5000" (88.875-88.9 MM)
.141-.156
Main:
Main Fillet:
3.503
Main:
Thrust Width:
145011C, 145011J, 145011N, 145111C, 145211A, 145211D, 145411, 145411A
Casting Numbers:
Comments:
MODELS 145GS, 145HK, 145GL, 145GZ, 145GKB
WAUKESHA
10.5
638
Stroke: 6.000" (152.4 MM)

2.9990-3.0000" (76.175-76.2 MM)
Rods:
#1 3.4990-3.5000" (88.875-88.9 MM)
Main:
Main:
181411A
Casting Numbers:
Comments:
145HS, 180GK
WAUKESHA
12.8
145HS
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
779
145HS
4.750" (120.65 MM)
.109" (2.769 MM)
.109
1.631
145GK
5.250" (133.35 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM)
.141-.156" (3.581-3.962 MM)
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.141-.156" (3.581-3.962 MM)
Main:
Main Fillet:
3.503
Main:
Thrust Width:
145011C, 145011J, 145111C, 145211A, 145211D, 145311C, 145411, 145411A
Casting Numbers:
Comments:
145-G SERIES, MODELS 145GS, 145HS, 145HK, 145GKB
479
145GK

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
12.8
779
Stroke: 6.000" (152.4 MM)

3.3740-3.3750" (85.7-85.725 MM)
Rods:
4.2490-4.2500" (107.925-107.95 MM)
Main:
Main: Numbers:
148111D, 148311-H, 148311-J, 148311M
Casting
Comments:
Engine Model
(cont.)
148DK
148DK
5.250" (133.35 MM)
.156-.188" (3.962-4.775 MM)
.156-.188" (3.962-4.775 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
DIESEL MODEL 148DK,148DKB,148DKBS,148DKBM,148DKBSM
WAUKESHA
13.4
817
145GZ
145GZ
5.375" (136.525 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9990-3.0000 *" (76.175-76.2 MM)
.141-.156" (3.581-3.962 MM) *
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.141-.156" (3.581-3.962 MM) *
Main:
Main Fillet:
3.503
Main:
Thrust Width:
145011C, 145011J, 145011N, 145111C, 145211A, 145211D, 145311-C, 145411, 145411A
Casting Numbers:
Comments:
145G & F817G SERIES,145GL,145GS,145HS,145HK,145GKB * ALSO HAS ROD DIAM 2.9975-2.9985 WITH
FILLET RADIUS .125-.156 FOR BOTH ROD & MAIN
WAUKESHA
13.4
817
F817G
F817G
5.375" (136.525 MM)

Stroke: 6.000" (152.4 MM)
Cyl Bore:
2.9990-3.0000" (76.175-76.2 MM) *
.141-.156" (3.581-3.962 MM) *
Rods:
Rod Fillet:
3.4990-3.5000" (88.875-88.9 MM)
.141-.156 (3.581-3.962 MM) *
Main:
Main Fillet:
3.503
Main:
Thrust Width:
145011C, 145011J, 145011N, 145111C, 145211A, 145211D, 145311-C, 145411, 145411A
Casting Numbers:
Comments:
F817G SERIES * ALSO HAS ROD DIAM 2.9975-2.9985 WITH FILLET RADIUS .125-.156 FOR BOTH ROD &
MAIN
WAUKESHA
13.6
831
Stroke: 8.000" (203.2 MM)

3.2490-3.2500" (82.525-82.55 MM)
Rods:
#1 3.7490-3.7500" (95.225-95.25 MM)
Main:
Main: Numbers:
8711E
Casting
Comments:
WAUKESHA
16.1
982
WL
MODELS WL, WS, WK, WOK, WBFH
WAUKESHA
16.6
1,012
WAUKESHA
17.4
6WALH
1,062
Stroke: 8.000" (203.2 MM)

3.2490-3.2500" (82.525-82.55 MM)
Rods:
#1 3.7490-3.7500" (95.225-95.25 MM)
Main:
Main: Numbers:
8711E
Casting
WL
WL
6.500" (165.1 MM)
.178-.198" (4.521-5.029 MM)
.178-.198
WAUKESHA
18.8
1,145
WL
WL, WK, WS
6.750" (171.45 MM)
.178-.198" (4.521-5.029 MM)
.178-.198
Cyl Bore:
Rod Fillet:
Main Fillet:
MODELS WL, WK, WS, WOK, WBFH
WAUKESHA
19.6
1,197
1197
Stroke: 6.500" (165.1 MM)

Cyl Bore:
3.3740-3.3750" (85.7-85.725 MM)
Rods:
Rod Fillet:
#1 3.9990-4.0000" (101.575-101.6 MM)
Main:
Main Fillet:
Main: Numbers:
123011G, 123011GSA, 123011T, 123011U, 123011X
Casting
Comments:
6WALH
5.750" (146.05 MM)

.125-.156" (3.175-3.962 MM)
.156-.188
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 8.000" (203.2 MM)

3.2490-3.2500" (82.525-82.55 MM)
Rods:
#1 3.7490-3.7500" (95.225-95.25 MM)
Main:
Main: Numbers:
8711E
Casting
Comments:
WL, WS, WK,

6.250" (158.75 MM)
.178-.198" (4.521-5.029 MM)
.178-.198
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 6.500" (165.1 MM)

Cyl Bore:
3.3740-3.3750" (85.7-85.725 MM)
Rods:
Rod Fillet:
#1 3.9990-4.0000" (101.575-101.6 MM)
Main:
Main Fillet:
Main:
123011G, 123011GSA, 123011T, 123011U, 123011X
Casting Numbers:
Comments:
MODELS 6WALH, 6WAKH, 6WAL, 6WAK, F1197
Comments:
WL
5.750" (146.05 MM)
.156" (3.962 MM)
.156
Stroke: 8.000" (203.2 MM)

3.7490-3.7500" (95.225-95.25 MM)
Rods:
#1 3.7490-3.7500" (95.225-95.25 MM)
Main:
Main: Numbers:
8711E
Casting
Comments:
WL
Cyl Bore:
Rod Fillet:
Main Fillet:
NAT'L GAS, MODEL 6WAKB,F1197,6WALH,6WAKH,6WAL,6WAK
480
1197
6.250" (158.75 MM)
.125-.156" (3.175-3.962 MM)
.156-.188

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
19.6
1197
1197
WAUKESHA
19.6
1,197
1197G
GAS, WAK & F1197G SERIES, 6WALH, 6WAKH, 6WAL
WAUKESHA
19.6
1,197
F1197D
WAUKESHA
31.2
NKD
31.2
1,905
NKR
Stroke: 8.250" (209.55 MM)

4.3740-4.3750" (111.1-111.125 MM)
Rods:
5.2490-5.2500" (133.325-133.35 MM)
Main:
Main: Numbers:
97011B, 97011C, 97111, 97111-A
Casting
NKR
7.000" (177.8 MM)
.156-.188" (3.962-4.775 MM)
.188-.219
Cyl Bore:
Rod Fillet:
Main Fillet:
GAS, ALSO 6NKR, 6NKD, 6NKDS
WAUKESHA
47.4
2,894
LRD
Stroke: 8.500" (215.9 MM)

Cyl Bore:
4.9990-5.0000" (126.975-127. MM)
Rods:
Rod Fillet:
5.4990-5.5000" (139.675-139.7 MM)
Main:
Main Fillet:
Main: Numbers:
12111C, 12111C, 12111C, 12111C, 15549G, 47011A, 47011B
Casting
LRD
8.500" (215.9 MM)
.250-.281" (6.35-7.137 MM)
.250-.281" (6.350-7.137 MM)
DIESEL
WAUKESHA
47.4
2,894
LRO
Stroke: 8.500" (215.9 MM)

3.9990-4.0000" (101.575-101.6 MM) **
Rods:
4.2490-4.2500" (107.925-107.95 MM) *
Main:
Main: Numbers:
12111F, 15549G, 47011A, 47011B
Casting
Comments:
NKD
7.0003-7.0008" (177.808-177.82 MM)
.156-.188" (3.962-4.775 MM)
.188-.219
Cyl Bore:
Rod Fillet:
Main Fillet:
DIESEL, F1905D SERIES, MODELS 6NKD, 6NKDBM,6NKDBSM
WAUKESHA
Comments:
F1197D
6.250" (158.75 MM)
Cyl Bore:
1,905
Stroke: 8.250" (209.55 MM)

4.3740-4.3750" (111.1-111.125 MM)
Rods:
5.2490-5.2500" (133.325-133.35 MM)
Main:
Main: Numbers:
97011B, 97011C, 97111, 97111-A
Casting
Comments:
1197G
6.250" (158.75 MM)
.125-.156" (3.175-3.962 MM)
.156-.188
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 6.500" (165.1 MM)

3.7490-3.7500" (95.225-95.25 MM)
Rods:
4.7490-4.7500" (120.625-120.65 MM)
Main:
Main:
Comments:
DIESEL, MODEL WAKD, F-1197D SERIES ENGINE
Comments:
6.250" (158.75 MM)

.125-.156" (3.175-3.962 MM)
.156-.188
DIESEL, MODEL 6WAKB, 6WALH, 6WAKH, 1197
Stroke: 6.500" (165.1 MM)

3.3740-3.3750" (85.7-85.725 MM)
Rods:
3.9990-4.0000" (101.575-101.6 MM)
Main:
Main: Numbers:
123011G, 123011-T, 123011X
Casting
Comments:
(cont.)
1197
Stroke: 6.500" (165.1 MM)

Cyl Bore:
3.3740-3.3750" (85.7-85.725 MM)
Rods:
Rod Fillet:
3.9990-4.0000" (101.575-101.6 MM)
Main:
Main Fillet:
Main: Numbers:
123011G, 123011GSA, 123011T, 123011U, 123011X
Casting
Comments:
Engine Model
ALSO LRORB SERIES *LRORB MAIN JOURN DIAM 4.6865-4.6875

4.3740-4.3750
WAUKESHA
47.4
LRO
8.500" (215.9 MM)
.250-.281" (6.35-7.137 MM)
.250-.281" (6.350-7.137 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
**LRORB ROD JOURN DIAM
2,894
8.500" (215.9 MM)

Stroke: 8.500" (215.9 MM)
Cyl Bore:
4.9990-5.0000" (126.975-127. MM)
.201" (5.105 MM)
Rods:
Rod Fillet:
#1 5.4990-5.5000" (139.675-139.7 MM)
.201
Main:
Main Fillet:
Main: Numbers:
12111C, 12111C, 12111C, 12111C, 15549G, 15549G, 47011A, 47011A, 47011B, 47011B
Casting
WAUKESHA
47.4
2,894
EARLY
Stroke: 8.500" (215.9 MM)

6.2485-6.2500" (158.712-158.75 MM)
Rods:
6.2485-6.2500" (158.712-158.75 MM)
Main:
Main: Numbers:
205011B
Casting
Comments:
VHP
8.500" (215.9 MM)
.250-.281" (6.35-7.137 MM)
.250-.281
GAS, VHP SERIES, MODELS F2895G, F2895GSI, F3521
WAUKESHA
47.4
2,894
LATE
Stroke: 8.500" (215.9 MM)

6.2485-6.2500" (158.712-158.75 MM)
Rods:
6.2485-6.2500" (158.712-158.75 MM)
Main:
Main: Numbers:
205011B
Casting
Comments:
VHP
Cyl Bore:
Rod Fillet:
Main Fillet:
VHP
Cyl Bore:
Rod Fillet:
Main Fillet:
GAS, VHP SERIES, MODELS F2895G, F2895GSI, F3521
481
VHP
8.500" (215.9 MM)
.250-.281" (6.35-7.137 MM)
.250-.281

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
6 Cylinders
47.4
2894
EARLY
Stroke: 8.500" (215.9 MM)

6.2485-6.2500" (158.712-158.75 MM)
Rods:
6.2485-6.2500" (158.712-158.75 MM)
Main:
Main: Numbers:
205011B
Casting
Comments:
VHP DIESEL
(cont.)
VHP DIESEL
8.500" (215.9 MM)

.250-.281" (6.35-7.137 MM)
.250-.281
Cyl Bore:
Rod Fillet:
Main Fillet:
8 1/2 BORE DIESEL
WAUKESHA
57.7
3,520
Stroke: 8.500" (215.9 MM)

4.9990-5.0000" (126.975-127. MM)
Rods:
#1 5.4990-5.5000" (139.675-139.7 MM)
Main:
Main: Numbers:
15549G, 47011A, 47011B
Casting
Comments:
Engine Model
LRZ
LRZ
9.375" (238.125 MM)
.250-.281" (6.35-7.137 MM)
.250-.281" (6.350-7.137 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
LRZ SERIES
WAUKESHA
WAUKESHA
8 Cylinders
9.3
570
Stroke: 4.250" (107.95 MM)

2.7480-2.7490" (69.799-69.825 MM)
Rods:
3.2490-3.2500" (82.525-82.55 MM)
Main:
Main:
GAS, ALSO T-H570 THRUST BRG WIDTH 1.399-1.401
Comments:
WAUKESHA
14.5
17.7
H884
17.7
H884
5.377" (136.576 MM)
Cyl Bore:
@ #3
Thrust Width:
THRUST BRG FLANGE .131-.133
1,077
H1077
Stroke: 5.188" (131.775 MM)

Cyl Bore:
4.2490-4.2500" (107.925-107.95 MM)
Rods:
Rod Fillet:
4.9990-5.0000" (126.975-127. MM)
Main:
Main Fillet:
Main:
Thrust Width:
230011
Casting Numbers:
Comments:
GAS, VC SERIES THRUST WASHER THKNS .151-.153, O/S AVLBL
WAUKESHA
H570
4.625" (117.475 MM)
@ #3
Thrust Width:
THRUST BRG FLANGE .131-.133
884
Stroke: 4.875" (123.825 MM)

3.2480-3.2490" (82.499-82.525 MM)
Rods:
3.7480-3.7490" (95.199-95.225 MM)
Main:
Main:
Comments:
GAS, ALSO T-H884 THRUST BRG WIDTH 1.649-1.651
WAUKESHA
H570
Cyl Bore:
1,077
H1077
5.750" (146.05 MM)
.172-.187" (4.369-4.75 MM)
.172-.187" (4.369-4.750 MM)
2.061-2.063
H1077 DIESEL
H1077 DIESEL
5.750" (146.05 MM)

Stroke: 5.188" (131.775 MM)
Cyl Bore:
4.2490-4.2500" (107.925-107.95 MM)
.172-.187" (4.369-4.75 MM)
Rods:
Rod Fillet:
4.9990-5.0000" (126.975-127. MM)
.172-.187" (4.369-4.750 MM)
Main:
Main Fillet:
2.061-2.063
Main:
Thrust Width:
230011
Casting Numbers:
Comments:
DIESEL, VC SERIES, TURBO AND NON-TURBO THRUST WASHER THKNS STD .151-.153, O/S AVLBL
WAUKESHA
40.6
2,474
Stroke: 7.000" (177.8 MM)

3.9990-4.0000" (101.575-101.6 MM)
Rods:
4.4990-4.5000" (114.275-114.3 MM)
Main:
Main:
Comments:
H-2476, H-2475
H2476
WAUKESHA
WAUKESHA
12 Cylinders
26.5
1616
Stroke: 5.188" (131.775 MM)

4.2490-4.2500" (107.925-107.95 MM)
Rods:
4.9990-5.0000" (126.975-127. MM)
Main:
Main:
233011
Casting Numbers:
Comments:
H2476
7.500" (190.5 MM)
Cyl Bore:
L1616
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
L1616
5.750" (146.05 MM)
.172-.187" (4.369-4.75 MM)
.172-.187" (4.369-4.750 MM)
2.061-2.063
GAS, VC SERIES
WAUKESHA
26.5
1,616
L1616 DIESEL
L1616 DIESEL
5.750" (146.05 MM)

Stroke: 5.188" (131.775 MM)
Cyl Bore:
4.2490-4.2500" (107.925-107.95 MM)
.172-.187" (4.369-4.75 MM)
Rods:
Rod Fillet:
4.9990-5.0000" (126.975-127. MM)
.172-.187" (4.369-4.750 MM)
Main:
Main Fillet:
2.061-2.063
Main:
Thrust Width:
233011
Casting Numbers:
Comments:
DIESEL, VC SERIES, TURBO AND NON-TURBO THRUST WASHER THKNS STD .151-.153, .010 O/S AVLBL
AVAILABLE.
482

Make
Liter
CID
Vin
Model
Year
WAUKESHA
WAUKESHA
12 Cylinders
60.8
3711
Stroke: 7.000" (177.8 MM)

4.7490-4.7500" (120.625-120.65 MM)
Rods:
5.4990-5.5000" (139.675-139.7 MM)
Main:
Main:
GAS, ALSO L-3711
Comments:
WAUKESHA
83.6
5,100
94.9
5,788
WAUKESHA
94.9
L-5788-G
5,788
L-5788-G
8.500" (215.9 MM)

.281" (7.137 MM)
.281" (7.137 MM)
L5790
L5790
8.500" (215.9 MM)
.250-.281" (6.35-7.137 MM)
.250-.281" (6.350-7.137 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
ALSO L5790G *MODEL L5790G ROD DIAM 5.7490-5.7500
WAUKESHA
94.9
5,788
Stroke: 8.500" (215.9 MM)

5.7490-5.7500" (146.025-146.05 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main: Numbers:
02000/1, 200111A, 200111H
Casting
VLRD
VLRD
8.500" (215.9 MM)
.250-.281" (6.35-7.137 MM)
.250-.281
Cyl Bore:
Rod Fillet:
Main Fillet:
DIESEL VLRD SERIES, VLROB, VLRDBS
WAUKESHA
115.4
7,040
Stroke: 8.500" (215.9 MM)

5.7490-5.7500" (146.025-146.05 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main:
Comments:
MODEL L7040G, NATURAL GAS ENGINE
WAUKESHA
115.4
L-7040-G
L-7040-G
9.375" (238.125 MM)
Cyl Bore:
7,041
Stroke: 8.500" (215.9 MM)

6.2490-6.2500" (158.725-158.75 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main: Numbers:
200311
Casting
L7042
L7042
9.375" (238.125 MM)
.250-.281" (6.35-7.137 MM)
.250-.281" (6.350-7.137 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
ALSO L7042G
WAUKESHA
115.4
7,042
Stroke: 8.500" (215.9 MM)

6.2490-6.2500" (158.725-158.75 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main:
Comments:
NATURAL GAS
7042
7042
9.375" (238.125 MM)
Cyl Bore:
WAUKESHA
WAUKESHA
16 Cylinders
35.3
2154
Stroke: 5.188" (131.775 MM)

4.2490-4.2500" (107.925-107.95 MM)
Rods:
4.9990-5.0000" (126.975-127. MM)
Main:
Main:
234211A
Casting Numbers:
Comments:
L-5100-G
8.500" (215.9 MM)

.250-.281" (6.35-7.137 MM)
.250-.281" (6.350-7.137 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 8.500" (215.9 MM)

6.2490-6.2500" (158.725-158.75 MM) *
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main: Numbers:
200311
Casting
Comments:
L-5100-G
MODEL L5100G, L5108
WAUKESHA
Comments:
L3712
7.500" (190.5 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
Stroke: 8.500" (215.9 MM)

5.7490-5.7500" (146.025-146.05 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main:
02000/1
Casting Numbers:
Comments:
MODEL L5788G
Comments:
(cont.)
L3712
Cyl Bore:
Stroke: 7.500" (190.5 MM)

5.7490-5.7500" (146.025-146.05 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main: Numbers:
203011B
Casting
Comments:
Engine Model
P2154
Cyl Bore:
Rod Fillet:
Main Fillet:
Thrust Width:
P2154
5.750" (146.05 MM)
.172-.187" (4.369-4.75 MM)
.172-.187" (4.369-4.750 MM)
2.061-2.063
GAS, VC SERIES THRUST WASHER THKNS STD .151-.153, .010 O/S AVLBL
WAUKESHA
35.3
2,154
P2154 DIESEL
P2154 DIESEL
5.750" (146.05 MM)

Stroke: 5.188" (131.775 MM)
Cyl Bore:
4.2490-4.2500" (107.925-107.95 MM)
.172-.187" (4.369-4.75 MM)
Rods:
Rod Fillet:
4.9990-5.0000" (126.975-127. MM)
.172-.187
Main:
Main Fillet:
2.061-2.063
Main:
Thrust Width:
234211A
Casting Numbers:
Comments:
DIESEL, VC SERIES, TURBO AND NON-TURBO THRUST WASHER THCKNS STD .151-.153, .010 O/S AVLBL
483

Make
Liter
CID
Vin
Model
WAUKESHA
WAUKESHA
153.9
9390
3 Cylinders
2.3
143
Stroke: 4.330" (109.982 MM)

4512316
Casting Numbers:
2-50
3.7402-3.7406" (95.001-95.011 MM)
Cyl Bore:
FIAT DIESEL, TRACTOR
WHITE
6 Cylinders
3.9
WHITE
240
Stroke: 5.000" (127. MM)

2.4990-2.4995" (63.475-63.487 MM)
Rods:
#1 2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
31315881
Casting Numbers:
4.1
WHITE
4.3
WHITE
3.875" (98.425 MM)

.156" (3.962 MM)
.156
Cyl Bore:
Rod Fillet:
Main Fillet:
3.438" (87.325 MM)

.125" (3.175 MM)
.125
265
4.4
WHITE
2-70
270
2-70 GAS
3.750" (95.25 MM)
Cyl Bore:
Stroke: 4.500" (114.3 MM)

2.1868-2.1875" (55.545-55.563 MM)
Rods:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main: Numbers:
342640, 342649, 464810
Casting
270
3.563" (90.5 MM)
.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
270
4.6
283
Stroke: 4.000" (101.6 MM)

2.4365-2.4375" (61.887-61.913 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
Comments:
2-70 DIESEL TRACTOR
WHITE
Cyl Bore:
Rod Fillet:
Main Fillet:
252
Stroke: 4.000" (101.6 MM)

2.2490-2.2500" (57.125-57.15 MM)
Rods:
2.6240-2.6250" (66.65-66.675 MM)
Main:
Main:
Comments:
2-70 GAS TRACTOR
WHITE
240A
240A
Stroke: 4.500" (114.3 MM)

2.1868-2.1875" (55.545-55.563 MM)
Rods:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main: Numbers:
342640, 342649, 464810
Casting
Comments:
P9390
9.375" (238.125 MM)
.250-.281" (6.35-7.137 MM)
.250-.281
ALSO P9390G
WHITE
Comments:
(cont.)
P9390
Cyl Bore:
Rod Fillet:
Main Fillet:
WHITE
Comments:
Engine Model
16 Cylinders
Stroke: 8.500" (215.9 MM)

6.2490-6.2500" (158.725-158.75 MM)
Rods:
6.2490-6.2500" (158.725-158.75 MM)
Main:
Main: Numbers:
257011
Casting
Comments:
Year
4.7
2-70
2-70 DIESEL
3.875" (98.425 MM)
Cyl Bore:
288
3.440" (87.376 MM)

Stroke: 5.125" (130.175 MM)
Cyl Bore:
2.1868-2.1875" (55.545-55.563 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main:
455360R, 455489, 464398, 482762, 618807, 619807, 619807B, 642271, 642272R, 662594R, 7434X
Casting Numbers:
WHITE
4.9
300
Stroke: 4.500" (114.3 MM)

2.1868-2.1875" (55.545-55.563 MM)
Rods:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main: Numbers:
342640, 342649, 464810
Casting
WHITE
5.2
Stroke: 4.500" (114.3 MM)

2.1868-2.1875" (55.545-55.563 MM)
Rods:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main: Numbers:
342640, 642649, 646810
Casting
Comments:
3.750" (95.25 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
318
120A
Cyl Bore:
Rod Fillet:
Main Fillet:
ENGINE CODE 318 (120A)
484
3.875" (98.425 MM)

.125" (3.175 MM)
.125

Make
Liter
CID
Vin
Model
WHITE
WHITE
6 Cylinders
5.5
5.8
6.0
(cont.)
4.000" (101.6 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
354
2-85
Stroke: 5.000" (127. MM)

2.4990-2.4995" (63.475-63.487 MM)
Rods:
#1 2.9985-2.9990" (76.162-76.175 MM)
Main:
Main:
11010429, 31322302
Casting Numbers:
Comments:
PERKINS DIESEL, 2-85, 2-105
WHITE
Engine Model
336
Stroke: 4.500" (114.3 MM)

2.1868-2.1875" (55.545-55.563 MM)
Rods:
#1 2.9995-3.0005" (76.187-76.213 MM)
Main:
Main: Numbers:
342640, 342649, 464810
Casting
WHITE
Year
Cyl Bore:
Rod Fillet:
3.875" (98.425 MM)

5/32 (.156) (NM)
Thrust Width:
@ CENTER
366
3.875" (98.425 MM)

Stroke: 5.125" (130.175 MM)
Cyl Bore:
2.1868-2.1875" (55.545-55.563 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.9995-3.0005" (76.187-76.213 MM)
.125
Main:
Main Fillet:
Main: Numbers:
455360R, 455489, 464398, 482762, 618807, 619807, 619807B, 642271, 642272R, 662594R, 7434X
Casting
WHITE
6.4
390
4.000" (101.6 MM)

Stroke: 5.125" (130.175 MM)
Cyl Bore:
2.1868-2.1875" (55.545-55.563 MM)
.125" (3.175 MM)
Rods:
Rod Fillet:
#1 2.9995-3.0005" (76.187-76.213 MM)
.125
Main:
Main Fillet:
Main: Numbers:
455360R, 455489, 464398, 482762, 618807, 619807, 619807B, 642271, 642272R, 662594R, 7434X
Casting
WHITE
6.5
400
200A
Stroke: 4.7000" (119.38 MM)

2.3093-2.3100" (58.656-58.674 MM)
Rods:
2.7485-2.7492" (69.812-69.83 MM)
Main:
Main:
Comments:
6-200A
WHITE
7.0
Thrust Width:
7.4
@ #1
427
Stroke: 5.000" (127. MM)

2.5000-2.5005" (63.5-63.513 MM)
Rods:
#1 3.2500-3.2505" (82.55-82.563 MM)
Main:
Main: Numbers:
420342, 430342, 491423, 67254
Casting
WHITE
4.2500" (107.95 MM)
Cyl Bore:
4.500" (114.3 MM)

1/8 (NM)
1/8
Cyl Bore:
Rod Fillet:
Main Fillet:
452
4.375" (111.125 MM)

Stroke: 5.000" (127. MM)
Cyl Bore:
2.5000-2.5005" (63.5-63.513 MM)
1/8 (NM)
Rods:
Rod Fillet:
#1 3.2500-3.2505" (82.55-82.563 MM)
1/8
Main:
Main Fillet:
Main: Numbers:
420342, 420342, 430342, 430342, 490642, 490642, 491423, 491423, 67254, 67254
Casting
WHITE
7.8
478
Stroke: 4.880" (123.952 MM)

2.9970-2.9980" (76.124-76.149 MM)
Rods:
3.6210-3.6220" (91.973-91.999 MM)
Main:
Main:
10935419, 3803000, 403803000
Casting Numbers:
Comments:
2-135, 2-155 DIESEL TRACTORS
WHITE
8.3
8.7
9.6
Thrust Width:
2.1320"
Cyl Bore:
Rod Fillet:
Main Fillet:
4.625" (117.475 MM)

1/8 (NM)
1/8
Cyl Bore:
Rod Fillet:
Main Fillet:
4.750" (120.65 MM)

1/8 (NM)
1/8
49-54
532
Stroke: 5.000" (127. MM)

2.5000-2.5005" (63.5-63.513 MM)
Rods:
#1 3.2500-3.2505" (82.55-82.563 MM)
Main:
Main: Numbers:
420342, 430342, 491423, 67254
Casting
WHITE
4.5630-4.5645" (115.9-115.938 MM)
504
Stroke: 5.000" (127. MM)

2.5000-2.5005" (63.5-63.513 MM)
Rods:
#1 3.2500-3.2505" (82.55-82.563 MM)
Main:
Main: Numbers:
420342, 430342, 491423, 67254
Casting
WHITE
478
Cyl Bore:
585
Stroke: 5.500" (139.7 MM)

3.4980-3.4990" (88.849-88.875 MM)
Rods:
#1 3.4890-3.4990" (88.621-88.875 MM)
Main:
Main:
Comments:
2-150 DIESEL TRACTOR, M MOLINE ENGINE
2-150
Cyl Bore:
485
M. MOLINE
4.7520-4.7530" (120.701-120.726 MM)

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
1 Cylinder
0.0
Stroke: 2.750" (69.850 MM)

1.0000-1.0010" (25.4-25.425 MM)
Rods:
ACN ENGINE
Comments:
WISCONSIN
Stroke:
Rods:
0.0
ACN
55-55
CAN
2.625" (66.675 MM)
Cyl Bore:
2.750" (69.850 MM)

1.0000-1.0010" (25.400-25.425 MM)
Comments:
Engine Model
BKN
55-55
BKN
Cyl Bore:
2.875" (73.025 MM)
Rod Width:
1.0000-1.0050" (25.400-25.527 mm)
BKN ENGINE
WISCONSIN
0.0
HACN
HACN
2.625" (66.675 MM)
Cyl Bore:
1.0000-1.0010" (25.4-25.425 MM)

Rods:
Comments:
HACN ENGINE
WISCONSIN
0.0
HAENL
HAENL
3.000" (76.2 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)

Rods:
Comments:
HAENL ENGINE
WISCONSIN
0.0
HBKN
HBKN
2.875" (73.025 MM)
Cyl Bore:
1.0000-1.0010" (25.4-25.425 MM)

Rods:
Comments:
HBKN ENGINE
WISCONSIN
0.0
HS7D
HS7D
3.000" (76.2 MM)
Cyl Bore:
1.3755-1.3760" (34.938-34.95 MM)

Rods:
Comments:
HS7D ENGINE
WISCONSIN
0.0
HS8D
HS8D
3.125" (79.375 MM)
Cyl Bore:
1.3755-1.3760" (34.938-34.95 MM)

Rods:
Comments:
HS8D ENGINE
WISCONSIN
Rods:
Rod Width:
1.250-1.255" (31.750-31.877 MM)
0.0
S12D
S12D
Cyl Bore:
3.500" (88.9 MM)
Rod Width:
1.250-1.255" (31.750-31.877 MM)
S12D ENGINE
WISCONSIN
0.0
3.000" (76.200 MM)

1.4984-1.4990" (38.059-38.075 MM)
Comments:
0.0
S14D
Rod Width:
1.250-1.255" (31.750-31.877 MM)
S7D
62-74
S7D
Cyl Bore:
3.000" (76.2 MM)
Rod Width:
1.1875-1.1925" (30.163-30.289 MM)
S7D ENGINE
WISCONSIN
0.0
2.625" (66.675 MM)

1.3755-1.3760" (34.938-34.95 MM)
Comments:
68-68
3.7495-3.7505" (95.237-95.263 MM)
2.625" (66.675 MM)

1.3755-1.3760" (34.938-34.95 MM)
Comments:
S14D
Cyl Bore:
S14D ENGINE
WISCONSIN
Stroke:
Rods:
S10D
3.250" (82.55 MM)
1.4984-1.4990" (38.059-38.075 MM)
Comments:
Stroke:
Rods:
S10D
Cyl Bore:
S10D ENGINE
WISCONSIN
Stroke:
Rods:
1.4984-1.4990" (38.059-38.075 MM)
Comments:
Rods:
0.0
S8D
63-63
S8D
Cyl Bore:
3.125" (79.375 MM)
Rod Width:
1.1875-1.1925" (30.163-30.289 MM)
S8D ENGINE
WISCONSIN
0.0
TR10D
Cyl Bore:
1.3755-1.3760" (34.938-34.95 MM)

Rods:
Comments:
TR10D ENGINE
486
TR10D
3.125" (79.375 MM)

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
1 Cylinder
0.0
Stroke: 2.625" (66.675 MM)

1.3755-1.3760" (34.938-34.95 MM)
Rods:
TRA10D ENGINE
Comments:
WISCONSIN
0.0
0.3
TRA10D
TRA12D
TRA10D
68-68
TRA12D
3.500" (88.900 MM)
Cyl Bore:
18
64-76
(cont.)
3.125" (79.375 MM)
Cyl Bore:
Stroke: 2.875" (73.025 MM)

1.3755-1.3760" (34.938-34.95 MM)
Rods:
Comments:
TRA12D ENGINE
WISCONSIN
Engine Model
AK
39-55
AK
2.875" (73.025 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
.9995-1.0005" (25.387-25.413 MM)
Rods:
Comments:
GAS, 4 CYCLE, HORIZONTAL CRANK, 4.1 HP .010,.020,.030 UNDERSIZE CRANKS AVLBL
WISCONSIN
0.3
18
AKN
49-55
AKN
2.875" (73.025 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
1.0000-1.0010" (25.4-25.425 MM)
Rods:
Comments:
WISCONSIN
0.3
18
AKS
AKS
2.875" (73.025 MM)

Stroke: 2.750" (69.85 MM)
Cyl Bore:
.9995-1.0005" (25.387-25.413 MM)
Rods:
Comments:
WISCONSIN
0.3
19
ADH
41-49
ADH
2.750" (69.85 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
GAS, 4 CYCLE, 5.1 HP, REPLACES AD, AE, AF, AG, AH .010,.020,.030 UNDERSIZE CRANKS AVLBL
WISCONSIN
0.3
21
WD1-340
Stroke: 3.071" (78.003 MM)

Cyl Bore:
1.8985-1.8991" (48.222-48.237 MM)
Rods:
1.8104-1.8110" (45.984-45.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR-COOL, ALSO MODEL WD1-350
WISCONSIN
0.4
23
WD1-340
2.953" (75.006 MM)
AE
33-41
AE
3.000" (76.2 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
WISCONSIN
0.4
23
AEH
41-49
AEH
3.000" (76.2 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
WISCONSIN
0.4
23
AEHS
AEHS
3.000" (76.2 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
WISCONSIN
0.4
23
AEN
49-57
AEN
3.000" (76.2 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
GAS, 4 CYCLE, 9.2 HP, REPLACED AEH, ADH OBSOLETE .010,.020,.030 UNDERSIZE CRANKS AVLBL
WISCONSIN
0.4
23
AENL
57-57
AENL
2.9995-3.0005" (76.187-76.213 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
WISCONSIN
0.4
23
AENS
AENS
3.000" (76.2 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.1250-1.1260" (28.575-28.6 MM)
Rods:
Comments:
WISCONSIN
0.4
23
TRD1-375
Stroke: 2.950" (74.93 MM)

Cyl Bore:
1.5746-1.5752" (39.995-40.01 MM)
Rods:
1.6529-1.6535" (41.984-41.999 MM)
Main:
Main:
Comments:
DIESEL,4-STROKE,VERTICAL,AIR-COOL,DIR INJ,TRD1-380
487
3.140" (79.756 MM)
TRD1-375

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
1 Cylinder
0.4
26
Stroke: 3.071" (78.003 MM)

1.8985-1.8991" (48.222-48.237 MM)
Rods:
1.8104-1.8110" (45.984-45.999 MM)
Main:
Main:
Comments:
WISCONSIN
0.5
0.5
(cont.)
WD1-430
29
WD1-430
3.307" (83.998 MM)
Cyl Bore:
TRD1-480
Stroke: 2.950" (74.93 MM)

Cyl Bore:
1.5746-1.5752" (39.995-40.01 MM)
Rods:
1.6529-1.6535" (41.984-41.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, VERTICAL, AIR-COOLED, DIR INJ
WISCONSIN
Engine Model
TRD1-480
3.540" (89.916 MM)
33
AFH
41-57
AFH
3.250" (82.55 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.3745-1.3755" (34.912-34.938 MM)
Rods:
Comments:
WISCONSIN
0.5
33
TRD1-540
Stroke: 3.340" (84.836 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.6529-1.6535" (41.984-41.999 MM)
Main:
Main:
Comments:
WISCONSIN
0.6
37
TRD1-605
Stroke: 3.340" (84.836 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.6529-1.6535" (41.984-41.999 MM)
Main:
Main:
Comments:
WISCONSIN
0.6
TRD1-540
3.540" (89.916 MM)
TRD1-605
3.740" (94.996 MM)
38
AGH
41-57
AGH
3.500" (88.9 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.3745-1.3755" (34.912-34.938 MM)
Rods:
Comments:
WISCONSIN
0.6
38
AGND
57-57
AGND
3.500" (88.9 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7500-1.7510" (44.45-44.475 MM)
Rods:
Comments:
WISCONSIN
0.7
41
AHH
41-57
AHH
3.625" (92.075 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.3750-1.3760" (34.925-34.95 MM)
Rods:
Comments:
WISCONSIN
0.7
41
WD1-660
Stroke: 3.740" (94.996 MM)

Cyl Bore:
2.3615-2.3622" (59.982-60. MM)
Rods:
2.2040-2.2047" (55.982-55.999 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, AIR-COOLED, ALSO MODEL WD1-670
WISCONSIN
0.8
46
Stroke: 3.740" (94.996 MM)

2.3615-2.3622" (59.982-60. MM)
Rods:
2.2040-2.2047" (55.982-55.999 MM)
Main:
Main:
Comments:
WD1-750
Cyl Bore:
Stroke:
Rods:
WD1-750
3.937" (100. MM)
WISCONSIN
WISCONSIN
WD1-660
3.740" (94.996 MM)
2 Cylinders
0.0
3.400" (86.36 MM)

2.0990-2.1000" (53.315-53.34 MM)
W2-1230
W2-1230
Cyl Bore:
3.7495-3.7505" (95.237-95.263 MM)
Rod Width:
2.069-2.074" (52.553-52.68 MM)
Cyl Bore:
3.000" (76.2 MM)
3.2491-3.2500" (82.527-82.55 MM)

Main:
Main:
GAS, ALSO W2-1235, 1250
Comments:
WISCONSIN
0.8
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
Comments:
TE, TED
46
TE, TED
488

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
2 Cylinders
0.8
46
TE
Stroke: 3.250" (82.550 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
TE & TED
Comments:
WISCONSIN
0.8
TRD2-755
Stroke: 2.950" (74.93 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.7718-1.7722" (45.004-45.014 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL, 4-STROKE, VERTICAL, AIR-COOLED, DIRECT INJ
WISCONSIN
0.9
52
WISCONSIN
0.9
53
WISCONSIN
0.9
0.9
0.9
54
54
Stroke: 3.250" (82.55 MM)

1.8756-1.8764 *" (47.64-47.661 MM)
Rods:
ROLLER (NM)
Main:
Main:
CA-86
Casting Numbers:
Comments:
TJD * TJD ENGINE 1.8750-1.8760
WISCONSIN
0.9
0.9
0.9
WISCONSIN
0.9
WD2-860
Cyl Bore:
3.250" (82.55 MM)
Cyl Bore:
3.2490-3.2500" (82.525-82.55 MM)
Cyl Bore:
3.2490-3.2500" (82.525-82.55 MM)
TF, TFD
57-76
TH SERIES
68-68
TF
54
46-57
TH
54
THD
TH ENGINE
57-76
489
THD
3.250" (82.55 MM)
THDM
Cyl Bore:
TF & TFD
3.250" (82.55 MM)
Cyl Bore:
54
TJD
3.250" (82.55 MM)
Cyl Bore:
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
CA-70, CA-86
Casting Numbers:
Comments:
THD ENGINE, REPLACED TF, TE OBSOLETE
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
CA-70, CA-86
Casting Numbers:
Comments:
THDM ENGINE
@ CENTER
3.307" (83.998 MM)
Cyl Bore:
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
CA-70, CA-86
Casting Numbers:
Comments:
TH ENGINE
WISCONSIN
TRD2-850
3.350" (85.09 MM)
Cyl Bore:
54
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
ROLLER (NM)
Main:
Main:
CA86
Casting Numbers:
Comments:
TF & TFD
WISCONSIN
@ CENTER
54
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
CA-70, CA-86
Casting Numbers:
Comments:
TH, THD, TJD, MTHD
WISCONSIN
TRD2-755
WD2-860
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
ROLLER (NM)
Main:
Main:
CA86
Casting Numbers:
Comments:
TF, TFD
WISCONSIN
TE & TED
3.150" (80.01 MM)
TRD2-850
Stroke: 2.950" (74.93 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.7718-1.7722" (45.004-45.014 MM)
Main:
Main:
Thrust Width:
Comments:
Stroke: 3.071" (78.003 MM)

1.9003-1.9013" (48.268-48.293 MM)
Rods:
CENTR 2.0749-2.0761" (52.702-52.733 MM)
Main 1:
ENDS 1.8128-1.8137" (46.045-46.068 MM)
Main:
Main 2:
Comments:
(cont.)
3.000" (76.200 MM)
Cyl Bore:
46
46-57
Engine Model
THDM
3.250" (82.55 MM)

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
2 Cylinders
1.0
58
1.0
61
1.1
@ CENTER
69
1.2
TRD2-1130
74
@ CENTER
TRD2-1205
TRD2-1205
3.740" (94.996 MM)
@ CENTER
WISCONSIN
4 Cylinders
1.5
92
40-69
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
1.8750-1.8760" (47.625-47.65 MM)
Main:
Main:
CA55, CA55, CA55
Casting Numbers:
Comments:
TRD2-1130
3.620" (91.948 MM)
Stroke: 3.350" (85.09 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.7718-1.7722" (45.004-45.014 MM)
Main:
Main:
Thrust Width:
Comments:
WISCONSIN
WD2-1000
3.386" (86.004 MM)
Cyl Bore:
Stroke: 3.350" (85.09 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.7718-1.7722" (45.004-45.014 MM)
Main:
Main:
Thrust Width:
Comments:
WISCONSIN
TRD2-955
3.540" (89.916 MM)
WD2-1000
Stroke: 3.386" (86.004 MM)

1.9003-1.9013" (48.268-48.293 MM)
Rods:
CENTR 2.0749-2.0761" (52.702-52.733 MM)
Main 1:
ENDS 1.8128-1.8137" (46.045-46.068 MM)
Main:
Main 2:
Comments:
WISCONSIN
(cont.)
TRD2-955
Stroke: 2.950" (74.93 MM)

Cyl Bore:
1.7714-1.7720" (44.994-45.009 MM)
Rods:
1.7718-1.7722" (45.004-45.014 MM)
Main:
Main:
Thrust Width:
Comments:
WISCONSIN
Engine Model
VE4, VE4D
3.000" (76.2 MM)

.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
VE4, VE4D * VE4D .0012-.0034
WISCONSIN
1.5
92
VE4
VE4
3.000" (76.2 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.7500-1.7510" (44.45-44.475 MM)
1/8
Rods:
Rod Fillet:
1.8750-1.8760" (47.625-47.65 MM)
Main:
Main:
CA55
Casting Numbers:
Comments:
VE-4, 4 STROKE, AIR COOLED, 21.5 HP * LATE MODELS WITH RENEWABLE INSERT TYPE
BEARINGS:.0012-.0034. REPLACE OLD STYLE RODS W/LATE STYLE.
WISCONSIN
1.5
92
VE4D
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
1.8750-1.8760" (47.625-47.65 MM)
Main:
Main:
CA55, CA55
Casting Numbers:
Comments:
VE-4D, 4 STROKE, AIR-COOLED, 21.5 HP
WISCONSIN
1.8
1.8
Cyl Bore:
Rod Fillet:
Main Fillet:
3.250" (82.55 MM)

.125" (3.175 MM)
.125
VE-4D
40-76
VF4, VF4D ROLLER BEARINGS
WISCONSIN
3.000" (76.2 MM)

.125" (3.175 MM)
108
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
ROLLER BEARING
Main:
Main: Numbers:
CA55, CA-55, CA71A
Casting
Comments:
40-69
Cyl Bore:
Rod Fillet:
VF4, VF4D
* VF4D OIL CLEAR .0012-.0034
108
VH
Stroke: 3.250" (82.55 MM)

1.8750-1.8760" (47.625-47.65 MM)
Rods:
ROLLER BEARING
Main:
Main:
CA55, CA-55, CA71A
Casting Numbers:
Comments:
VH4, VH4D, VH4DM, W41770 ROLLER BEARINGS
56-56
Cyl Bore:
Rod Fillet:
Main Fillet:
VH4, VH4D, VH
3.2490-3.2500" (82.525-82.55 MM)

.125" (3.175 MM)
.125" (3.175 MM)
* W4-1770 OIL CLEAR .0012-.0033
490

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
4 Cylinders
1.8
108
VF4
3.250" (82.55 MM)
1/8
1/8
Cyl Bore:
Rod Fillet:
Main Fillet:
VF-4, 4 STROKE, AIR-COOLED, 25 HP * REPLACE W/LATE STYLE RODS WITH RENEWABLE INSERT TYPE
BRGS. CLEAR FOR LATE STYLE ROD: .0012-.0034.
WISCONSIN
1.8
108
VF4D
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
ROLLER BEARING
Main:
Main: Numbers:
CA55, CA-55, CA71A
Casting
Comments:
(cont.)
VF4
Stroke: 3.250" (82.55 MM)

1.7500-1.7510" (44.45-44.475 MM)
Rods:
ROLLER BEARING
Main:
Main: Numbers:
CA55, CA-55, CA71A
Casting
Comments:
Engine Model
40-76
VF-4D
3.250" (82.55 MM)

.125" (3.175 MM)
.125" (3.175 MM)
Cyl Bore:
Rod Fillet:
Main Fillet:
VF-4D, 4 STROKE, AIR-COOLED, 25 HP ROLLER BEARINGS
WISCONSIN
1.8
108
VH4
VH4
3.250" (82.55 MM)

Stroke: 3.250" (82.55 MM)
Cyl Bore:
1.8750-1.8760" (47.625-47.65 MM)
1/8
Rods:
Rod Fillet:
ROLLER BEARING
1/8
Main:
Main Fillet:
Main:
CA55, CA-55, CA71A
Casting Numbers:
Comments:
VH4, 4 STROKE, AIR-COOLED, 30 HP * LATE MODELS: .0012-.0033 CLR
WISCONSIN
1.8
108
VH4D
Stroke: 3.250" (82.55 MM)

1.8750-1.8760" (47.625-47.65 MM)
Rods:
ROLLER BEARING
Main:
Main: Numbers:
CA55, CA-55, CA71A
Casting
Comments:
VH4D
VH4D, 4 STROKE, AIR-COOLED, 30 HP * LATE MODEL: .0012-.0033 CLR
WISCONSIN
1.8
108
VH4DM
Stroke: 3.250" (82.55 MM)

1.8750-1.8760" (47.625-47.65 MM)
Rods:
ROLLER BEARING
Main:
Main: Numbers:
CA55, CA-55, CA71A
Casting
Comments:
56-56
3.2490-3.2500" (82.525-82.55 MM)
1/8
1/8
Cyl Bore:
Rod Fillet:
Main Fillet:
VH4DM
3.250" (82.55 MM)

.125" (3.175 MM)
.125
Cyl Bore:
Rod Fillet:
Main Fillet:
VH4DM ROLLER BEARINGS
WISCONSIN
1.8
108
W4-1770
W4-1770
Cyl Bore:
3.250" (82.55 MM)
Cyl Bore:
3.499" (88.875 MM)
Cyl Bore:
3.498-3.500" (88.849-88.900 MM)
1.8750-1.8760" (47.625-47.65 MM)

Rods:
CA55, CA-55, CA71A
Casting Numbers:
Comments:
W4-1770 ENGINE
WISCONSIN
2.5
154
VG4D
Stroke: 4.000" (101.6 MM)

2.1250-2.1260" (53.975-54. MM)
Rods:
Comments:
GAS
WISCONSIN
2.5
154
Stroke: 4.000" (101.6 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
CA-69D
Casting Numbers:
Comments:
VG461, V460D, V461D, GAS AIR COOL, 60.5 HP
WISCONSIN
Stroke:
Rods:
2.5
461
60-70
154
4.000" (101.6 MM)

1.3170-1.3220" (33.452-33.579 MM)
Comments:
53-53
VG4D
VG4D
V460 & V461
53-53
VG4D
3.499" (88.875 MM)
Cyl Bore:
1.3170-1.3220" (33.452-33.579 MM)

Rod Width:
VG4D, 4 STROKE, AIR COOLED, 37 HP, VM4 OBSOLETE * LATE MODELS: .0013-.0035
WISCONSIN
2.5
154
VP4
44-53
VP4
3.500" (88.9 MM)

Stroke: 4.000" (101.6 MM)
Cyl Bore:
1.7500-1.7510 *" (44.45-44.475 MM)
Rods:
Comments:
VP4, VP4D, 4 STROKE, AIR-COOLED, 31 HP * AFTER SER #771501: ROD JOURNAL DIA=1.8750-1.8760OIL
CLR=.0012-.0034
WISCONSIN
2.5
Stroke: 4.000" (101.6 MM)

2.1250-2.1260" (53.975-54. MM)
Rods:
Comments:
VP4D, GAS ENGINE
154
VP4D
Cyl Bore:
491
VP4D
3.499" (88.875 MM)

Make
Liter
CID
Vin
Model
Year
WISCONSIN
WISCONSIN
4 Cylinders
2.5
177
465
Stroke: 4.000" (101.6 MM)

2.1232-2.1240" (53.929-53.95 MM)
Rods:
2.3000-2.3005" (58.42-58.433 MM) FOR ROLLER BEAI
Main 1:
2.3020-2.3025" FOR SHELL TYPE BEARING
Main 2:
CA-75
Casting Numbers:
Comments:
Engine Model
(cont.)
V460, 461, 465,
3.7480-3.7490" (95.199-95.225 MM)
Cyl Bore:
V460, 461, 465, GAS AIR COOLED ENGINE
WISCONSIN
4.2
255
Stroke: 4.500" (114.3 MM)

2.7500-2.7510" (69.85-69.875 MM)
Rods:
Comments:
VR4D, 4 STROKE, AIR-COOLED, 56.5 HP
VR4D
53-60
YANMAR
YANMAR
1 Cylinder
0.2
12
Stroke: 2.1654" (55.000 MM)

1.1797-1.1804" (29.965-29.982 MM)
Rods:
1.1810-1.1820" (30.002-30.015 MM)
Main:
Main:
DIESEL, DIR INJ, AIR COOLED
Comments:
YANMAR
0.2
0.3
13
0.3
YANMAR
0.3
L48AE
17
L60AE
18
L70AE
19
0.3
YANMAR
0.4
TF50
21
2.913" (73.99 MM)
L75AE
22
0.4
TF60
23
2.953" (75.006 MM)
TF70
Stroke: 3.150" (80.01 MM)

Cyl Bore:
1.6912-1.6918" (42.956-42.972 MM)
Rods:
Comments:
DIESEL, 4-STROKE, D/I,LIQUID COOLED,HORIZONTAL CYL
YANMAR
0.4
24
Stroke: 2.7559" (70.000 MM)

1.5734-1.5741" (39.965-39.982 MM)
Rods:
1.5749-1.5755" (40.002-40.018 MM)
Main:
Main:
Comments:
YANMAR
0.4
Stroke: 2.756" (70.000 MM)

1.5734-1.5741" (39.965-39.982 MM)
Rods:
1.5749-1.5755" (40.002-40.018 MM)
Main:
Main:
Comments:
L75AE
3.1496-3.1508" (80.000-80.030 MM)
Cyl Bore:
Stroke: 3.150" (80.01 MM)

Cyl Bore:
1.6912-1.6918" (42.956-42.972 MM)
Rods:
Comments:
YANMAR
L70AE
3.0709-3.0720" (78.000-78.030 MM)
Stroke: 2.835" (72.009 MM)

Cyl Bore:
1.4159-1.4166" (35.964-35.982 MM)
Rods:
Comments:
YANMAR
L60AE
2.9528-2.9539" (75.000-75.030 MM)
Cyl Bore:
Stroke: 2.7559" (70.000 MM)

1.5734-1.5741" (39.965-39.982 MM)
Rods:
1.5749-1.5755" (40.002-40.018 MM)
Main:
Main:
Comments:
L48AE
2.7559-2.7571" (70.000-70.030 MM)
Cyl Bore:
Stroke: 2.441" (62.000 MM)

1.4159-1.4166" (35.965-35.982 MM)
Rods:
1.3780-1.3787" (35.002-35.018 MM)
Main:
Main:
Comments:
L40AE
2.6772-2.6783" (68.000-68.030 MM)
Cyl Bore:
Stroke: 2.4409" (62.000 MM)

1.4160-1.4166" (35.965-35.982 MM)
Rods:
1.3780-1.3787" (35.002-35.018 MM)
Main:
Main:
Comments:
YANMAR
L40AE
Cyl Bore:
Stroke: 2.165" (55.000 MM)

1.1797-1.1804" (29.965-29.982 MM)
Rods:
1.1812-1.1817" (30.002-30.015 MM)
Main:
Main:
Comments:
YANMAR
VR4D
4.250" (107.95 MM)
Cyl Bore:
3.071" (78.003 MM)
L90AE
Cyl Bore:
25
L90AE
3.3071-3.3083" (84.000-84.030 MM)
L100AE
Cyl Bore:
492
L100AE
3.3858-3.3870" (86.000-86.030 MM)

Make
Liter
CID
Vin
Model
Year
YANMAR
YANMAR
1 Cylinder
0.4
27
0.5
30
3.1496-3.1508" (80.-80.03 MM)
TF90
Stroke: 3.425" (86.995 MM)

Cyl Bore:
1.7699-1.7706" (44.955-44.973 MM)
Rods:
Comments:
YANMAR
0.6
36
3.346" (84.988 MM)
TF110
Stroke: 3.780" (96.012 MM)

Cyl Bore:
1.8879-1.8887" (47.953-47.973 MM)
Rods:
Comments:
YANMAR
0.7
42
3.465" (88.011 MM)
TF120
Stroke: 3.780" (96.012 MM)

Cyl Bore:
1.8879-1.8887" (47.953-47.973 MM)
Rods:
Comments:
YANMAR
0.8
46
3.622" (91.999 MM)
TF140
Stroke: 4.134" (105.004 MM)

Cyl Bore:
2.1241-2.1251" (53.952-53.978 MM)
Rods:
Comments:
YANMAR
0.9
52
3.780" (96.012 MM)
TF160
Stroke: 4.134" (105.004 MM)

Cyl Bore:
2.1241-2.1251" (53.952-53.978 MM)
Rods:
Comments:
4.0160" (102.006 MM)
YANMAR
YANMAR
(cont.)
TF80
Stroke: 3.425" (86.995 MM)

Cyl Bore:
1.7699-1.7706" (44.955-44.973 MM)
Rods:
Comments:
YANMAR
Engine Model
2 Cylinders
0.0
2T75HLE
2T75HLE
2.9528" (75.001 MM)
Cyl Bore:
1.7321" (43.995 MM)

Rods:
FLY 2.5590" (64.999 MM)
Main 1:
GEAR 1.8504" (47. MM)
Main 2:
INTRM 1.8504" (47. MM)
Main 3:
DIESEL, T-HLE SERIES
Comments:
YANMAR
0.0
2T90LE
2T90LE
3.543" (89.992 MM)
Cyl Bore:
2.1220-2.1260" (53.899-54. MM)

Rods:
OTHRS 2.7520-2.7560" (69.901-70.002 MM)
Main 1:
FLYWH 3.5390-3.5430" (89.891-89.992 MM)
Main:
Main 2:
Comments:
DIESEL, T-LE SERIES THRUST BRG THKNS .116
YANMAR
0.6
36
Stroke: 2.8346" (72.000 MM)

1.5728-1.5734" (39.950-39.964 MM)
Rods:
FLY 2.3602-2.3608" (59.950-59.964 MM)
Main 1:
GEAR 1.7303-1.7309" (43.950-43.964 MM)
Main:
Main 2:
INTRM 1.7303-1.7309" (43.950-43.964 MM)
Main 3:
Comments:
DIESEL, 2T72HLE-TK, TK235
YANMAR
0.6
36
Stroke: 2.835" (72.009 MM)

1.5728-1.5734" (39.949-39.964 MM)
Rods:
#1&2 1.7303-1.7309" (43.95-43.965 MM)
Main 1:
#3 2.3602-2.3608" (59.949-59.964 MM)
Main:
Main 2:
Comments:
DIESEL
YANMAR
0.6
2T72HLE
2T72HLE
2.8346-2.8358" (72.000-72.030 MM)
Cyl Bore:
TK235
2.835" (72.009 MM)
Cyl Bore:
38
2T73A
Stroke: 2.953" (75.006 MM)

Cyl Bore:
1.8484-1.8490" (46.949-46.965 MM)
Rods:
2.5571-2.5576" (64.95-64.963 MM)
Main:
Main:
Comments:
DIESEL, YM135, YM135D THRUST WASHER THKNS .1142-.1181
493
2T73A
2.874" (73. MM)

Make
Liter
CID
Vin
Model
Year
YANMAR
YANMAR
2 Cylinders
0.7
40
YANMAR
0.9
YANMAR
1.0
52
1.2
2T80UJ
61
2T80UJ
3.1496" (80. MM)
Cyl Bore:
2T84A
70
3.307" (83.998 MM)
2TR20A-X
Stroke: 3.543" (89.992 MM)

Cyl Bore:
2.1240-2.1246" (53.95-53.965 MM)
Rods:
2.7539-2.7545" (69.949-69.964 MM)
Main:
Main:
Comments:
YM240, YM240
3.5433-3.5447" (90.-90.035 MM)
YANMAR
YANMAR
2TR13A
2.9528-2.9539" (75.001-75.029 MM)
Stroke: 3.543" (89.992 MM)

Cyl Bore:
2.1240-2.1246" (53.95-53.965 MM)
Rods:
2.7539-2.7545" (69.949-69.964 MM)
Main:
Main:
Comments:
YANMAR
(cont.)
2TR13A
Stroke: 2.953" (75.006 MM)

Cyl Bore:
1.8484-1.8490" (46.949-46.965 MM)
Rods:
2.5571-2.5576" (64.95-64.963 MM)
Main:
Main:
Comments:
Stroke: 3.3464" (84.999 MM)

1.7307-1.7309" (43.96-43.965 MM)
Rods:
FLY 2.5525-2.5527" (64.834-64.839 MM)
Main 1:
OTHRS 2.3602-2.3607" (59.949-59.962 MM)
Main:
Main 2:
Comments:
DIESEL, 650 JOHN DEERE
Engine Model
3 Cylinders
0.0
0.0
3QM30
3QM30
3T75HLE
3T75HLE
.0014-.0037" (.036-.094 MM)

Rods:
2.7559" REPORTED
Main 1:
2.7559"
Main 2:
2.7559"
Main 3:
3.5430"
Main 4:
DIESEL
Comments:
YANMAR
2.9528" (75.001 MM)
Cyl Bore:
1.7321" (43.995 MM)

Rods:
FLY 2.5590" (64.999 MM)
Main 1:
GEAR 1.8504" (47. MM)
Main:
Main 2:
INTRM 1.8504" (47. MM)
Main 3:
Comments:
DIESEL, T-HLE SERIES
YANMAR
0.0
3T80LE
3T80LE
3.150" (80.01 MM)
Cyl Bore:
1.9680-1.9690" (49.911-50.013 MM)

Rods:
2.7520-2.7560" (69.901-70.002 MM)
Main:
Main:
Comments:
DIESEL, T-LE SERIES
YANMAR
0.0
3T90LE
3T90LE
3.5433" (90. MM)
Cyl Bore:
2.1240-2.1244" (53.95-53.96 MM)

Rods:
OTHRS 2.7540-2.7550" (69.951-69.977 MM)
Main 1:
FLY 3.5390-3.5430" (89.891-89.992 MM)
Main:
Main 2:
Comments:
DIESEL, T-LE SERIES THRUST BRG THKNS .108
YANMAR
0.0
3TG66
3TG66
3TG72
3TG72
1.4150-1.4155" (35.941-35.954 MM)

Rods:
1.6110-1.6115" (40.919-40.932 MM)
Main:
Main:
Comments:
GAS, JOHN DEERE, MOWER F912, GARDEN TRACTOR 322
YANMAR
0.0
Stroke: 2.8345" (72.000 mm)

1.5720-1.5725" (39.929-39.942 MM)
Rods:
1.7300-1.7305" (43.942-43.955 MM)
Main:
Main:
Comments:
GAS, JOHN DEERE MOWER F932
494

Make
Liter
CID
Vin
Model
Year
YANMAR
YANMAR
3 Cylinders
0.7
40
YANMAR
0.8
48
YANMAR
0.9
57
YANMAR
0.9
YANMAR
1.0
1.0
YANMAR
1.2
3TNA72
1.2
3TN75
61
YANMAR
1.3
YANMAR
1.4
2.953" (75.006 MM)
@ REAR
3TNE74
81-88
3TNC78
75
3TN78
3.0709-3.0720" (78.001-78.029 MM)
3T80UJ
3TN82
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
Rod Fillet:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL, 3TNA82, JOHN DEERE, 4-STROKE, VERTICAL,D/I
495
3T80UJ
3.1496-3.1508" (80.-80.03 MM)
Cyl Bore:
83
3TNC78
3.0709-3.0720" (78.001-78.029 MM)

.138-.150" (3.500-3.800 MM)
.138-.150" (3.500-3.800 MM)
3TN78
Cyl Bore:
78
3TNE74
2.9134-2.9146" (74.000-74.030 MM)
Cyl Bore:
70
Stroke: 3.3464" (84.999 MM)

1.7307-1.7309" (43.96-43.965 MM)
Rods:
FLY 2.5525-2.5527" (64.834-64.839 MM)
Main 1:
OTHRS 2.3602-2.3607" (59.949-59.962 MM)
Main:
Main 2:
Comments:
DIESEL
@ REAR
Thrust Width:
Stroke: 3.150" (80.01 MM)

Cyl Bore:
1.6910-1.6914" (42.951-42.962 MM)
Rods:
Rod Fillet:
1.8485-1.8489" (46.952-46.962 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, JOHN DEERE, ALSO 3TNC78E, DIRECT INJECTION
YANMAR
3.88
2.8346-2.8358" (71.999-72.029 MM)
Cyl Bore:
61
Stroke: 3.386" (86.004 MM)

1.6910-1.6914" (42.951-42.962 MM)
Rods:
1.8485-1.8489" (46.952-46.962 MM)
Main:
Main:
Comments:
DIESEL, JOHN DEERE, DIRECT INJECTION
3T72HLE
2.8346-2.8358" (72.000-72.030 MM)
Stroke: 2.953" (75.006 MM)

Cyl Bore:
1.6910-1.6914" (42.951-42.962 MM)
Rods:
1.8485-1.8489" (46.952-46.962 MM)
Main:
Main:
Thrust Width:
Comments:
DIESEL,JOHN DEERE,4-STROKE,VERTICAL,H20 COOLED,D/I
YANMAR
3TNE68
3T72HLE
54
Stroke: 3.071" (78.000 MM)

1.5736-1.5740" (39.970-39.980 MM)
Rods:
1.7311-1.7315" (43.970-43.980 MM)
Main:
Main:
Comments:
DIESEL, JOHN DEERE, INDIRECT INJECTION
@ REAR
2.6772-2.6783" (68.000-68.030 MM)
Cyl Bore:
Stroke: 2.835" (72.009 MM)

1.5736-1.5740" (39.969-39.98 MM)
Rods:
1.7311-1.7315" (43.97-43.98 MM)
Main:
Main:
Comments:
DIESEL, 4-STROKE, H20 COOLED, INDIRECT INJ
3.66
2.600-2.600" (66.04-66.04 MM)
3TNE68
Cyl Bore:
Stroke: 2.8346" (72.000 MM)

1.5728-1.5734" (39.950-39.964 MM)
Rods:
FLY 2.3602-2.3608" (59.950-59.964 MM)
Main 1:
GEAR 1.7303-1.7309" (43.950-43.964 MM)
Main:
Main 2:
INTRM 1.7303-1.7309" (43.950-43.964 MM)
Main 3:
Comments:
DIESEL, 3T72HLE-TK, TK353
(cont.)
3TN66E
Stroke: 2.530" (64.262 MM)

Cyl Bore:
1.4160-1.4170" (35.966-35.992 MM)
Rods:
1.5736-1.5740" (39.969-39.98 MM)
Main:
Main:
Thrust Width:
DIESEL,4-STROKE,VERTICAL,WATER COOLED,INDIRECT INJ
Comments:
Stroke: 2.835" (72.000 MM)

1.4161-1.4165" (35.970-35.980 MM)
Rods:
1.5736-1.5740" (39.970-39.980 MM)
Main:
Main:
Comments:
DIESEL, JOHN DEERE
Engine Model
3TN82
3.2283-3.2295" (81.999-82.029 MM)
.138-.150" (3.500-3.800 MM)
.138-.150" (3.500-3.800 MM)
@ REAR

Make
Liter
CID
Vin
Model
Year
YANMAR
YANMAR
3 Cylinders
1.4
87
1.5
91
YANMAR
1.6
3TN84
3.3071-3.3083" (84.-84.031 MM)
.138-.150" (3.500-3.800 MM)
.138-.150" (3.500-3.800 MM)
3T84A
Stroke: 3.543" (89.992 MM)

Cyl Bore:
2.1240-2.1246" (53.95-53.965 MM)
Rods:
FRONT 2.7539-2.7543" (69.949-69.959 MM)
Main 1:
CENTR 2.7539-2.7543" (69.949-69.959 MM)
Main:
Main 2:
Thrust Width:
REAR 3.5413-3.5417" (89.949-89.959 MM)
Main 3:
Comments:
100
Stroke: 3.543" (90.000 MM)

1.8879-1.8883" (47.952-47.962 MM)
Rods:
2.1240-2.1245" (53.952-53.962 MM)
Main:
Main:
Comments:
3T84A
3.3071-3.3085" (84.-84.036 MM)
1.180 @ #3
* REAR OIL CLR: .0026-.0052
3TNE88
4 Cylinders
1.6
100
4JHE
Stroke: 3.390" (86.106 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main:
DIESEL, 4JH-TE TURBO, 4JH-HTE TURBO, 4JH-DTE TURBO
Comments:
YANMAR
1.8
111
1.9
4TN82
116
YANMAR
2.2
YANMAR
3.1
134
YANMAR
3.3
4TNE88
190
YANMAR
3.5
YANMAR
3.5
Stroke: 4.300" (110.000 MM)

2.3603-2.3608" (59.952-59.964 MM)
Rods:
2.7540-2.7545" (69.952-69.964 MM)
Main:
Main:
Comments:
DIESEL, JOHN DEERE, DIR INJ
4TNE88
3.4646-3.4657" (88.000-88.030 MM)
4T95
202
3.7400-3.7410" (95.000-95.030 MM)
4TNE98
Cyl Bore:
211
Stroke: 4.3307" (110.000 MM)

2.3603-2.3608" (59.952-59.964 MM)
Rods:
2.7540-2.7545" (69.952-69.964 MM)
Main:
Main:
Comments:
DIESEL, 4LH-TE, 4LH-HTE, 4LH-DTE, 4LH-STE
4TN84
3.307" (83.998 MM)
.138-.150" (3.500-3.800 MM)
.138-.150" (3.500-3.800 MM)
Cyl Bore:
Stroke: 4.330" (109.982 MM)

Cyl Bore:
2.2815-2.2820" (57.950-57.963 MM)
Rods:
2.6752-2.6757" (67.950-67.964 MM)
Main:
Main:
4T95J
Casting Numbers:
Comments:
JOHN DEERE 1450 + 1650 TRACTOR - SEE JOHN DEERE TO
Stroke: 4.331" (110.000 MM)

2.2816-2.2820" (57.952-57.962 MM)
Rods:
2.5571-2.5575" (64.952-64.962 MM)
Main:
Main:
Comments:
DIESEL
3.2283-3.2295" (81.999-82.009 MM)

.138-.150" (3.500-3.800 MM)
.138-.150" (3.500-3.800 MM)
@ REAR
4TN84
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
Rod Fillet:
1.9666-1.9670" (49.952-49.962 MM)
Main:
Main Fillet:
Main:
Comments:
DIESEL, JOHN DEERE, TURBO & NON-TURBO, DIR INJ
Stroke: 3.543" (90.000 MM)

1.8879-1.8883" (47.952-47.962 MM)
Rods:
2.1240-2.1245" (53.952-53.962 MM)
Main:
Main:
Comments:
4JHE
3.070" (77.978 MM)
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
Rod Fillet:
1.9666-1.9670" (49.9512-49.962 MM)
Main:
Main Fillet:
Main:
Thrust Width:
Comments:
DIESEL,JOHN DEERE SKID LOADER,4TN82E,D/I,H20 COOLD
YANMAR
3TNE88
3.4646-3.4657" (88.0000-88.030 MM)
Cyl Bore:
YANMAR
YANMAR
(cont.)
3TN84
Stroke: 3.386" (86.004 MM)

Cyl Bore:
1.8879-1.8883" (47.953-47.963 MM)
Rods:
Rod Fillet:
1.9690-1.9700" (50.013-50.038 MM)
Main:
Main Fillet:
Main:
DIESEL,JOHN DEERE,4-STROKE,VERTICAL,H20 COOLED,D/I
Comments:
YANMAR
Engine Model
4LH SERIES
Cyl Bore:
211
496
88-01
4LH SERIES
3.9370-3.9382" (100.000-100.030 MM)
4TN100
Cyl Bore:
4TNE98
3.8580-3.8590" (98.000-98.030 MM)
4TN100
3.9370-3.9382" (100.000-100.030 MM)

Make
Liter
CID
Vin
Model
Year
YANMAR
YANMAR
6 Cylinders
7.1
435
Stroke: 4.921" (125.000 MM)

2.8323-2.8331" (71.940-71.960 MM)
Rods:
3.3835-3.3842" (85.940-85.960 MM)
Main:
Main:
TURBO DIESEL, DIRECT INJECTION, VERTICAL
Comments:
6CX-ETYE
Cyl Bore:
6CX-ETYE
3 Cylinders
2.7
164
Stroke: 4.3300" (109.982 MM)

2.3615-2.3622" (59.982-60. MM)
Rods:
2.7552-2.7559" (69.982-70. MM)
Main:
Main:
DIESEL, ALSO 5211/45 & 3320/40 TRACTORS
Comments:
5213/43
Cyl Bore:
5213/43
4.0157" (101.999 MM)
ZETOR
ZETOR
-93
4.3307-4.3319" (110.000-110.030 MM)
ZETOR
ZETOR
Engine Model
4 Cylinders
0.0
4320/40
4320/40
3.9370" (100. MM)

Stroke: 4.3300" (109.982 MM)
Cyl Bore:
2.3615-2.3622" (59.982-60. MM)
Rods:
2.7552-2.7559" (69.982-70. MM)
Main:
Main:
DIESEL, ALSO 6211/45 TRACTOR, UR 1 * MAX END PLAY .0236, THRUST WASHER THKNS .115, 4
Comments:
OVERSIZES IN .012 INCREMENTS
ZETOR
3.9
Stroke: 4.7250" (120.015 MM)

2.3615-2.3622" (59.982-60. MM)
Rods:
2.7552-2.7559" (69.982-70. MM)
Main:
Main:
Comments:
DIESEL, ALSO 7711/45 TRACTOR
239
6320/40
Cyl Bore:
497
4.0157" (101.999 MM)
6320/40
498
Crankshaft Casting Numbers

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
GM
6.1
No Model
371
V8
57-60
(ACM) W/E
CHRYSLER
2.0
TALON
122
L4
93-98
(ACM) W/E
CHRYSLER
2.0
LASER
122
L4
93-94
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
CHRYSLER
5.7
No Model
350
V8
68-71
GM
6.5
No Model
394
V8
59-64
JOHN DEERE
5.3
321
L2
34-52
JOHN DEERE
5.3
321
L2
34-52
JOHN DEERE
5.3
321
L2
34-52
JOHN DEERE
5.3
321
L2
34-52
JOHN DEERE
5.3
321
L2
34-52
JOHN DEERE
5.3
321
L2
34-52
NAVISTAR
2.5
385
D155
155
L3
NAVISTAR
2.5
385
D155
155
L3
NAVISTAR
2.5
385
D155
155
L3
NAVISTAR
2.5
385
D155
155
L3
NAVISTAR
2.5
385
D155
155
L3
NAVISTAR
2.5
385
D155
155
L3
002904
CHRYSLER
2.5
DAKOTA
150
L4
91-02
002904
CHRYSLER
2.5
No Model
150
L4
89-93
002904
CHRYSLER
2.5
No Model
150
L4
86-88
002904
CHRYSLER
2.5
No Model
150
L4
84-86
003K
GM
2.0
No Model
122
L4
87-89
003N
GM
2.0
No Model
122
L4
87-89
01
GM
2.5
FIERO
151
L4
83-86
01
GM
2.5
No Model
151
L4
82-86
010700
CASE
4.4
700B
267
L4
010700
CASE
4.4
730 SERIES
267
L4
010700
CASE
4.9
870
BG
301
L4
010700
CASE
5.5
336
336
L4
0-10700
CASE
4.1
400
251
L4
0-10700
CASE
4.1
730
251
L4
0-10700
CASE
4.1
770
251
L4
0-10700
CASE
4.4
No Model
267
L4
0-10700
CASE
4.7
830
284
L4
0-10700
CASE
4.7
830
284
L4
0-10700
CASE
4.9
830
301
L4
010700AB
CASE
4.1
400
251
L4
010700AB
CASE
4.4
700B
267
L4
010700AB
CASE
4.4
730 SERIES
267
L4
010700AB
CASE
4.9
870
BG
301
L4
010700AB
CASE
5.5
336
336
L4
0-10700AB
CASE
4.1
400
251
L4
0-10700AB
CASE
4.1
730
251
L4
0-10700AB
CASE
4.1
770
251
L4
0-10700AB
CASE
4.4
No Model
267
L4
0-10700-AB
CASE
4.9
830
301
L4
0-107700
CASE
4.7
830
284
L4
0-107700
CASE
4.7
830
284
L4
01148AB
CASE
6.6
LA
404
L4
01231
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
0-123-1
CUMMINS
11.0
H672
672
L6
40-68
013427
GM
No Model
400
V8
72-75
6.6
OLDS
BG
BG
D
499
60-70
60-70
40-53

Casting
Manufacturer
Liter
Model
CID Cyl
Year
013427
GM
6.6
No Model
013427
GM
6.6
No Model
400
V8
74-75
400
V8
01355011D
WAUKESHA
7.0
77-79
135DK
426
L6
01355011D
WAUKESHA
01355011D
WAUKESHA
7.0
135GK
426
L6
7.4
135GZ
451
0-1591
L6
CASE
4.3
260
L4
0-1591
CASE
4.5
276
L4
0-1591AB
CASE
4.3
260
L4
0-1591AB
CASE
4.5
276
L4
015C1
NAVISTAR
3.9
544
D239
239
L4
015C1 1089
NAVISTAR
3.9
544
D239
239
L4
017
CHRYSLER
2.5
No Model
151
L4
81-83
017
CHRYSLER
2.5
No Model
151
L4
81-83
017
CHRYSLER
3.3
No Model
A/J
199
L6
65-70
017
GM
2.5
FIERO
151
L4
83-86
017
GM
2.5
No Model
151
L4
82-86
017
GM
2.5
No Model
151
L4
85-87
017
GM
2.5
No Model
151
L4
87-88
017
GM
2.5
S-10
151
L4
87-91
0-191561
GM
6.7
No Model
409
V8
59-66
02000/1
WAUKESHA
94.9
L-5788-G
5788
V 12
02000/1
WAUKESHA
94.9
VLRD
5788
V 12
020201A1
MAZDA
3.0
929
JE
180
V6
90-96
026R
VOLKSWAGEN
1.8
PASSAT
AEB
110
L4
98-01
0290
FORD
1.8
COURIER
110
L4
72-78
0290
MAZDA
1.8
No Model
110
L4
70-79
0324
MAZDA
1.3
GLC
78
L4
76-78
035D
AUDI
2.1
5000 SERIES
KH
131
L5
84-86
035D
AUDI
2.1
5000 SERIES
WD
131
L5
78-83
035D
AUDI
2.2
5000 SERIES
KX
136
L5
83-87
035D
AUDI
2.2
5000 SERIES
KZ
136
L5
85-86
035D
AUDI
2.2
5000 SERIES
MC
136
L5
86-91
035D
AUDI
2.2
No Model
3B
136
L5
91-92
035D
AUDI
2.3
COUPE
7A
141
L5
89-91
035D
AUDI
2.3
COUPE
NG
141
L5
87-92
035D
AUDI
2.3
QUATTRO
NF
141
L5
87-91
0363
GM
4.8
No Model
292
L6
63-73
0363
GM
4.8
No Model
292
L6
74-77
0363
GM
4.8
No Model
292
L6
78-90
03712100
SAME
6.2
380
380
L6
049F
AUDI
1.7
No Model
105
L4
81-83
049F
CHRYSLER
1.7
No Model
105
L4
78-83
049F
VOLKSWAGEN
1.7
No Model
EN
104
L4
81-84
049F
VOLKSWAGEN
1.7
No Model
JF
104
L4
81-84
049F
VOLKSWAGEN
1.7
No Model
WT
104
L4
82-83
049H
VOLKSWAGEN
1.5
No Model
CK
90
L4
77-81
0552
MAZDA
2.0
No Model
VA
121
L4
71-79
05700AB
CASE
2.5
880
154
L3
05700AB
CASE
2.5
880
154
L3
05700AB
CASE
2.5
154
L4
05700AB
CASE
2.7
350 TRACTOR
164
L4
05700AB
CASE
2.7
885
164
L3
05700AB
CASE
2.7
165
L4
41-54
05700AB
CASE
2.7
165
L4
41-54
05700AB
CASE
2.8
SC
SC
171
L4
41-54
05844
ALLIS CHALMERS
13.8
16000T
844
L6
05844
BUDA
13.8
No Model
844
L6
05844
BUDA
15.9
No Model
971
L6
059A
AUDI
1.9
No Model
114
L4
500
VIN
ZJ
41-54
74-77

Casting
Manufacturer
Liter
Model
059A
AUDI
1.9
No Model
ZL
114
L4
73
059D
AUDI
1.9
No Model
ZJ
114
L4
74-77
059D
AUDI
1.9
No Model
ZL
114
L4
73
064105101
AUDI
2.0
No Model
A/J
121
L4
77-79
064105101
CHRYSLER
2.0
No Model
A/J
121
L4
77-79
06AF
VOLKSWAGEN
2.0
BEETLE
AEG
121
L4
98-03
071Z724149
CATERPILLAR
4.0
3054
244
L4
071Z724149
CATERPILLAR
4.0
3054
244
L4
97-02
077
GM
2.5
FIERO
151
L4
83-86
078AB
AUDI
2.8
QUATTRO
AHA
169
V6
98-01
0819
GM
6.7
No Model
409
V8
59-66
088
GM
5.4
No Model
330
V8
64-67
09700AB
CASE
6.2
500
377
L6
09700AB
CASE
8.3
2090
504
L6
0970DAB
CASE
6.2
500
377
L6
0970DAB
CASE
6.2
600 & 900
GAS
377
L6
0970DAB
CASE
6.2
600 & 900
TURBO
377
L6
0970DAB
CASE
6.2
900
DIESL
377
L6
0970DAB
CASE
6.2
930
377
L6
0970DAB
CASE
6.2
970
BG
377
L6
0970DAB
CASE
6.6
730
401
L6
0970DAB
CASE
6.6
970
BD
401
L6
0970DAB
CASE
7.4
1030
DIESL
451
L6
0970DAB
CASE
7.4
1070
451
L6
09N
CHRYSLER
3.0
No Model
181
V6
87-95
09N
CHRYSLER
3.0
No Model
181
V6
91-92
09N
CHRYSLER
3.0
No Model
181
V6
91-92
09N
CHRYSLER
3.0
No Model
181
V6
90-92
09N
HYUNDAI
3.0
SONATA
183
V6
89-98
09N
MITSUBISHI
3.0
GALANT
181
V6
88-92
09N
MITSUBISHI
3.0
MONTERO
181
V6
95-03
0R2823
CATERPILLAR
10.3
3176
629
L6
89-96
0R4555
CATERPILLAR
10.3
3176
629
L6
89-96
0R4556
CATERPILLAR
10.3
3176
629
L6
89-96
0R5051
CATERPILLAR
10.4
3208
636
V8
0R5051
CATERPILLAR
10.4
3208
636
V8
0R5051
CATERPILLAR
10.4
3208
636
V8
0R5051
CATERPILLAR
10.4
3208
TURBO
636
V8
87-92
GM
4.9
No Model
300
V8
91-95
MASERATI
2.5
No Model
122
L4
80-88
1.9
FORD
2.9
BRONCO
177
V6
86-92
1.9
FORD
2.9
No Model
177
V6
87-90
100200
CHRYSLER
3.9
NASH
A/J
235
L6
33-47
1003
GM
2.2
CAVALIER
134
L4
91-94
1003
GM
2.2
CAVALIER
134
L4
94-97
10044540
GM
2.5
No Model
151
L4
89-91
10044543
GM
2.5
No Model
151
L4
89
10044543
GM
2.5
No Model
151
L4
90-92
10044543
GM
2.5
S-10
151
L4
91-93
10044543
GM
2.5
S-10
151
L4
87-91
10053480
GM
4.3
No Model
262
V6
86-97
10055480
GM
4.3
No Model
262
V6
90-91
10055480
GM
4.3
No Model
262
V6
85-86
10055480
GM
4.3
No Model
262
V6
92-95
10055480
GM
4.3
No Model
262
V6
92-04
10055480
GM
4.3
No Model
262
V6
96-00
10055480
GM
4.3
No Model
262
V6
86-97
10055480
ISUZU
4.3
HOMBRE
262
V6
98
10055480
ISUZU
4.3
HOMBRE
262
V6
97-99
501
VIN
O
D
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
100C19
SIMCA
2.4
No Model
10103606
GM
2.2
CAVALIER
143
L8
54-61
134
L4
10103606
GM
2.2
CAVALIER
91-94
134
L4
10103606
GM
2.2
94-97
No Model
134
L4
10105865
GM
90-91
4.3
No Model
262
V6
10105865
90-91
GM
4.3
No Model
262
V6
85-86
10105865
GM
4.3
No Model
262
V6
92-95
10105865
GM
4.3
No Model
262
V6
92-04
10105865
GM
4.3
No Model
262
V6
96-00
10105865
GM
4.3
No Model
262
V6
86-97
10105865
ISUZU
4.3
HOMBRE
262
V6
97-99
1011
GM
7.4
No Model
454
V8
87-90
1011
GM
7.4
No Model
454
V8
87-90
101109
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
101109
CUMMINS
14.0
NH230
NH
855
L6
101109
CUMMINS
14.0
NT SERIES
855
L6
101109
CUMMINS
14.0
NT855
NT
855
L6
10114
GM
7.4
No Model
454
V8
87-90
10114187
GM
6.0
No Model
366
V8
91-98
10114187
GM
7.0
No Model
427
V8
91-96
10114188
GM
7.4
No Model
454
V8
96-00
10114188
GM
7.4
No Model
454
V8
91-97
10114189
GM
6.0
No Model
366
V8
91-98
10114189
GM
7.0
No Model
427
V8
91-96
1013228
CATERPILLAR
6.6
3116
403
L6
89-95
1013228
CATERPILLAR
7.2
3126
439
L6
95-02
1015865
ISUZU
4.3
HOMBRE
262
V6
98
10168568
GM
4.3
CAPRICE
265
V8
94-96
101A
AUDI
1.9
No Model
ZJ
114
L4
74-77
101A
AUDI
1.9
No Model
ZL
114
L4
73
1020310101
MERCEDES BENZ
2.3
190E
140
L4
84-88
1020310101
MERCEDES BENZ
2.3
190E
140
L4
86-90
1033105
MERCEDES BENZ
3.0
300E
183
L6
86-92
103427
GM
5.3
No Model
326
V8
63-67
103427
GM
6.6
FIREBIRD
400
V8
67-79
103427
GM
6.6
No Model
400
V8
72-75
103427
GM
6.6
No Model
400
V8
74-75
103427
GM
6.6
No Model
400
V8
75-75
103427
GM
6.6
No Model
400
V8
72-77
103427
GM
6.6
No Model
400
V8
77-79
10541B
CUMMINS
6.6
J SERIES
401
L6
10541B
CUMMINS
6.6
J160
401
L6
10541B
CUMMINS
7.6
C 180
464
L6
1054B
CUMMINS
6.6
J SERIES
401
L6
1054B
CUMMINS
6.6
J160
401
L6
1054B
CUMMINS
7.6
C 180
464
L6
106071
CUMMINS
4.4
POWER TORQUE 270
267
L4
106071
CUMMINS
5.1
C309
309
L4
106071
CUMMINS
6.6
J SERIES
401
L6
106071
CUMMINS
6.6
J160
401
L6
106071
CUMMINS
7.6
C 180
464
L6
1074
MERCRUISER
3.7
MIE 470
MIE
224
L4
107674
SIMCA
2.4
No Model
143
L8
54-61
10846
CUMMINS
11.0
H672
672
L6
40-68
10846
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
10935419
HERCULES
7.8
No Model
478
L6
10935419
OLIVER
7.8
478
478
L6
10935419
WHITE
7.8
478
478
L6
10974
CUMMINS
4.4
POWER TORQUE 270
267
L4
502
VIN
DOHC
88-91

Casting
Manufacturer
Liter
Model
VIN
10974
CUMMINS
5.1
C309
309
L4
10A-10247
MINN MOLINE
5.5
No Model
336
L4
10A-12751
MINN MOLINE
3.4
335
206
L4
10A-12751
MINN MOLINE
3.4
445
206
L4
10A-12751
MINN MOLINE
3.6
No Model
220
L4
10A-12751
MINN MOLINE
3.9
No Model
236
L4
10A-20411
MINN MOLINE
3.6
No Model
220
L4
10A-2700
MINN MOLINE
3.4
335
206
L4
10A-2700
MINN MOLINE
3.4
445
206
L4
10A-2700
MINN MOLINE
3.9
No Model
236
L4
10A-5090
MINN MOLINE
8.3
540B-6
504
L6
10A-6032
MINN MOLINE
0.0
302
L4
10A-6032
MINN MOLINE
3.4
335
206
L4
10A-6032
MINN MOLINE
3.4
445
206
L4
10A-6032
MINN MOLINE
3.6
No Model
220
L4
10A-6032
MINN MOLINE
3.9
No Model
236
L4
10A7502
MINN MOLINE
3.3
335
165
L4
10A7502
MINN MOLINE
3.4
335
206
L4
10A7502
MINN MOLINE
3.4
445
206
L4
10A7502
MINN MOLINE
3.9
No Model
236
L4
10-B
CHRYSLER
1.8
COLT
107
L4
93-94
10-B
CHRYSLER
1.8
COLT
107
L4
89-93
10-B
MITSUBISHI
1.8
ECLIPSE
107
L4
93-94
10J
RENAULT
1.0
No Model
58
L4
62-67
10J
RENAULT
1.1
No Model
68
L4
59-71
11
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
11
TOYOTA
1.9
No Model
113
L4
69-71
11010429
WHITE
5.8
2-85
354
L6
110541
CUMMINS
4.4
POWER TORQUE 270
267
L4
110541
CUMMINS
5.1
C309
309
L4
110541
CUMMINS
6.6
J SERIES
401
L6
110541
CUMMINS
6.6
J160
401
L6
110541
CUMMINS
7.6
C 180
464
L6
11054-1
CUMMINS
5.1
C309
309
L4
110541B
CUMMINS
6.6
J SERIES
401
L6
110541B
CUMMINS
6.6
J160
401
L6
110541B
CUMMINS
7.6
C 180
464
L6
110760
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
110760
CUMMINS
14.0
NH230
NH
855
L6
110760
CUMMINS
14.0
NT SERIES
855
L6
110760
CUMMINS
14.0
NT855
NT
855
L6
111786
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
111787
CUMMINS
2.7
NT165
NT
165
L4
111787
CUMMINS
2.9
NT180
NT
180
L4
111787
CUMMINS
3.2
NT200
NT
200
L4
111787
CUMMINS
7.3
No Model
448
L4
111787
CUMMINS
8.1
No Model
495
L4
111789
CUMMINS
14.0
NH230
855
L6
111789
CUMMINS
14.0
NT SERIES
855
L6
111789
CUMMINS
14.0
NT855
855
L6
1122297
CHRYSLER
4.6
No Model
282
L6
37-52
1122298
CHRYSLER
4.6
No Model
282
L6
37-52
112330
CUMMINS
4.4
POWER TORQUE 270
267
L4
112330
CUMMINS
5.1
C309
309
L4
113
GM
3.8
No Model
231
V6
88-91
1130
GM
5.0
No Model
307
307
V8
68-73
1130
GM
5.4
No Model
327
V8
68-69
1133
MERCRUISER
3.7
MIE 470
MIE
224
L4
1139-A3
REO
4.2
OA255
255
L6
503
NH
NT
CID Cyl
Year
57-67
61-67
88-91
88-91

Casting
Manufacturer
Liter
Model
CID Cyl
Year
1139-A3
REO
4.8
OA292
1140
GM
1.6
CHEVETTE
292
L6
55-58
98
L4
1140
GM
1.6
CHEVETTE
82-87
98
L4
1140
GM
1.6
CHEVETTE
76-77
98
L4
11405645
SAAB
1.5
No Model
78-79
91
V4
1140N
GM
1.6
CHEVETTE
62-67
98
L4
1140N
GM
1.6
79-80
CHEVETTE
98
L4
1140N
GM
80-82
1.6
CHEVETTE
98
L4
1142709
CHRYSLER
82-87
6.2
No Model
377
V8
11-448510
46-53
FORD
2.6
CAPRI
159
V6
72-73
116
VOLVO
2.3
B23
(1)
141
L4
82-84
1161072
CATERPILLAR
12.0
C12
730
L6
96-03
1161080
CATERPILLAR
10.3
3176C
629
L6
97-02
1161080
CATERPILLAR
10.3
C10
629
L6
96-02
116447
NAVISTAR
5.0
BD308
BD
308
L6
55-57
116447
NAVISTAR
5.0
No Model
308
L6
116447
NAVISTAR
5.0
No Model
308
L6
116447H
NAVISTAR
4.1
250
L6
116447H
NAVISTAR
4.4
U, B, BD
269
L6
40-69
116447H
NAVISTAR
5.0
BD308
BD
308
L6
55-57
116447H
NAVISTAR
5.0
No Model
308
L6
116447H
NAVISTAR
5.0
No Model
308
L6
1170912101
MERCEDES BENZ
5.0
500SEL
303
V8
84-91
117111
PACKARD
4.6
No Model
282
L8
35-47
117111
STUDEBAKER
4.6
No Model
282
L8
39-47
1173217
GM
6.0
No Model
364
V8
57-61
1173341
GM
6.0
No Model
364
V8
57-61
1174
GM
4.3
No Model
262
V6
85-86
1174
GM
4.3
No Model
262
V6
86-97
1174N
GM
4.3
No Model
262
V6
85-86
1174N
GM
4.3
No Model
262
V6
85-86
1174N
GM
4.3
No Model
262
V6
86-97
1178
GM
5.0
Z-28
302
302
V8
67-69
11798512040439
MERCEDES BENZ
4.5
450SEL
276
V8
76-80
1182
GM
5.7
No Model
350
V8
78-79
1182
GM
5.7
No Model
350
V8
80-88
1182
GM
5.7
No Model
350
V8
77-82
1182
GM
5.7
No Model
350
V8
79-88
1182
GM
5.7
No Model
350
V8
80-83
1182
GM
5.7
No Model
350
V8
74-76
1182
GM
5.7
No Model
350
V8
68-75
118528
NAVISTAR
5.9
No Model
361
L6
49-69
118528
NAVISTAR
6.7
WD-9
406
L6
49-69
118528H
NAVISTAR
5.2
RED-318
318
L6
118528H
NAVISTAR
5.9
No Model
361
L6
49-69
118528H
NAVISTAR
6.7
WD-9
406
L6
49-69
118530
NAVISTAR
6.6
WD-9
401
L6
49-69
118530
NAVISTAR
7.4
WD-9
450
L6
49-69
118530H
NAVISTAR
7.4
WD-9
450
L6
49-69
1185539
CHRYSLER
3.8
No Model
230
L6
42-52
1185539
GM
7.0
No Model
425
V8
63-66
1186538
GM
6.0
No Model
364
V8
57-61
1189-A3
REO
4.8
OA292
292
L6
55-58
1189-A3
REO
5.4
OH160
331
L6
1189-A3
REO
5.4
OH160
OH160
331
L6
55-57
119
GM
1.6
TRACKER
97
L4
89-96
1193645
GM
3.5
No Model
215
V8
61-63
1193645
GM
3.5
No Model
215
V8
61-63
1193645
ROVER
3.5
No Model
217
V8
79-87
504
VIN

Casting
Manufacturer
Liter
Model
1193645
ROVER
3.9
No Model
11C74
AUSTIN
0.9
SPRITE
11C-74
AUSTIN
0.9
No Model
11C-74
MG
0.9
MK I, MK II, MIDGET
11C-74
MG
0.9
SPRITE MK I
11F74CF
AUSTIN
1.2
No Model
11F74CF
AUSTIN
1.5
11F74CF
AUSTIN
11F-74-CF
MG
11F-74-CF
VIN
CID Cyl
Year
241
V8
89-96
58
L4
56-65
58
L4
52-62
58
L4
52-62
58
L4
61-62
73
L4
54-59
No Model
91
L4
54-61
1.6
No Model
99
L4
61-72
1.2
No Model
73
L4
54-61
MG
1.6
MARK II
99
L4
61-62
11F-74-CF
MG
1.6
MARK II
99
L4
61-62
11G74
AUSTIN
0.9
SPRITE
58
L4
56-65
11G-74
AUSTIN
0.9
No Model
58
L4
52-62
11G-74
MG
0.9
MK I, MK II, MIDGET
58
L4
52-62
11G-74
MG
0.9
SPRITE MK I
58
L4
61-62
11G74CF
AUSTIN
1.2
No Model
73
L4
54-59
11G74CF
AUSTIN
1.5
No Model
91
L4
54-61
11G74CF
AUSTIN
1.6
No Model
99
L4
61-72
11G-74-CF
MG
1.2
No Model
73
L4
54-61
11G-74-CF
MG
1.6
MARK II
99
L4
61-62
11G-74-CF
MG
1.6
MARK II
99
L4
61-62
11M
NISSAN
1.5
PULSAR
E15
91
L4
82-83
11M-14
NISSAN
1.5
PULSAR
E15
91
L4
82-83
12
TOYOTA
1.9
No Model
113
L4
69-71
12012G159
MG
1.3
MK III MIDGET
78
L4
66-74
12012G159
MG
1.3
No Model
76
L4
40-54
12111
WAUKESHA
0.0
6LS
L6
121111
WAUKESHA
1.0
ICK
61
L4
121111AF
WAUKESHA
1.0
ICK
61
L4
121111C
WAUKESHA
1.0
ICK
61
L4
121111F
WAUKESHA
1.0
ICK
61
L4
121111M
WAUKESHA
1.0
ICK
61
L4
12111C
WAUKESHA
47.4
LRD
2894
L6
12111C
WAUKESHA
47.4
LRD
2894
L6
12111C
WAUKESHA
47.4
LRD
2894
L6
12111C
WAUKESHA
47.4
LRD
2894
L6
12111C
WAUKESHA
47.4
No Model
2894
L6
12111C
WAUKESHA
47.4
No Model
2894
L6
12111C
WAUKESHA
47.4
No Model
2894
L6
12111C
WAUKESHA
47.4
No Model
2894
L6
12111F
WAUKESHA
47.4
LRO
2894
L6
12111-F
WAUKESHA
0.0
6LS
L6
121610
CUMMINS
855
L6
121610
855
L6
855
L6
14.0
NH230
CUMMINS
14.0
NT SERIES
121610
CUMMINS
14.0
NT855
122111
WAUKESHA
0.0
ICKB
L4
1224-A3
REO
4.8
OA292
292
L6
1224-A3
REO
5.4
OH160
331
L6
1224-A3
REO
5.4
OH160
331
L6
1224S-A3
REO
5.4
OH160
331
L6
1224S-A3
REO
5.4
OH160
OH160
331
L6
55-57
1228739
GM
5.2
No Model
320
L8
37-52
123011G
WAUKESHA
16.6
6WALH
1012
L6
123011G
WAUKESHA
19.6
1197
1197
L6
123011G
WAUKESHA
19.6
1197
1197
L6
123011G
WAUKESHA
19.6
1197G
1197
L6
123011GSA
WAUKESHA
16.6
6WALH
1012
L6
123011GSA
WAUKESHA
19.6
1197
1197
L6
123011GSA
WAUKESHA
19.6
1197
1197
L6
505
NH
NT
OH160
88-91
55-58
55-57

Casting
Manufacturer
Liter
Model
VIN
123011T
WAUKESHA
16.6
6WALH
1012
L6
123011T
WAUKESHA
19.6
1197
1197
L6
123011T
WAUKESHA
19.6
1197
1197
L6
123011-T
WAUKESHA
19.6
1197G
1197
L6
123011U
WAUKESHA
16.6
6WALH
1012
L6
123011U
WAUKESHA
19.6
1197
1197
L6
123011U
WAUKESHA
19.6
1197
1197
L6
123011X
WAUKESHA
16.6
6WALH
1012
L6
123011X
WAUKESHA
19.6
1197
1197
L6
123011X
WAUKESHA
19.6
1197
1197
L6
123011X
WAUKESHA
19.6
1197G
1197
L6
123380
CUMMINS
7.3
No Model
448
L4
123380
CUMMINS
8.1
No Model
495
L4
123400
CUMMINS
7.3
No Model
448
L4
123400
CUMMINS
8.1
No Model
495
L4
123410
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
123410
CUMMINS
14.0
NH230
NH
855
L6
123410
CUMMINS
14.0
NT SERIES
855
L6
123410
CUMMINS
14.0
NT855
855
L6
123420
CUMMINS
7.3
No Model
448
L4
123420
CUMMINS
8.1
No Model
495
L4
123441R3
NAVISTAR
9.0
No Model
549
V8
60-78
1235413
GM
3.3
No Model
204
V6
89-93
1235419
CHRYSLER
5.7
No Model
350
V8
68-71
1235419
GM
5.6
No Model
340
V8
64-67
1235419
GM
5.7
No Model
350
V8
68-74
1235419
GM
5.7
No Model
350
V8
73-77
1235419
GM
5.7
No Model
350
V8
74
1235419
GM
5.7
No Model
350
V8
75-77
1235419
GM
5.7
No Model
350
V8
77-80
1235419
JEEP
5.7
No Model
350
V8
68-71
1237
GM
2.2
CAVALIER
134
L4
91-94
1237
GM
2.2
CAVALIER
134
L4
94-97
1237
GM
2.2
No Model
134
L4
90-91
1237
GM
2.3
No Model
138
L4
88-95
1245113
GM
3.8
No Model
231
V6
88-91
1245413
GM
3.8
No Model
231
V6
87-88
1245413
GM
3.8
No Model
231
V6
88
1245413
GM
3.8
No Model
231
V6
88-91
125
GM
3.8
No Model
231
V6
78-81
125211-D
WAUKESHA
0.0
6WAKR
L6
125211-E
WAUKESHA
0.0
6WAKR
1252126
BMW
1.8
318I
M10B
1252126
BMW
1.8
320I
1252126
BMW
2.0
1252126
BMW
125430
NT
CID Cyl
Year
88-91
L6
108
L4
84-85
M10B
108
L4
80-83
2002
M10
121
L4
73-76
2.0
320I
M10
121
L4
77-79
AUSTIN
1.1
No Model
67
L4
64
125430
MG
1.1
No Model
70
L4
40-56
12551388
OPEL
1.2
No Model
74
L4
61-62
12552216
GM
5.7
CAMARO
346
V8
97-04
12554681
GM
4.0
AURORA
244
V8
95-01
12554681
GM
4.6
NORTHSTAR
279
V8
93-03
12555089
GM
5.7
CAMARO
346
V8
97-04
1255624
GM
3.2
No Model
196
V6
78-79
1255624
GM
3.8
GRAND NATIONAL
231
V6
86-88
1255624
GM
3.8
No Model
231
V6
84-85
1255624
GM
3.8
No Model
231
V6
78-81
1255624
GM
3.8
No Model
231
V6
82
1255624
GM
3.8
No Model
231
V6
83-87
506

Casting
Manufacturer
Liter
Model
CID Cyl
Year
1255624
GM
4.1
No Model
1255624
GM
4.1
No Model
252
V6
80-81
252
V6
1255645
GM
3.7
No Model
82-84
224
L6
1255645
GM
3.7
No Model
40-47
225
V6
1255645
GM
3.8
64-67
No Model
231
V6
1255646
GM
75-77
3.7
No Model
225
V6
1255674
64-67
GM
3.2
No Model
196
V6
78-79
1255674
GM
3.8
GRAND NATIONAL
231
V6
86-88
1255674
GM
3.8
No Model
231
V6
78
1255674
GM
3.8
No Model
231
V6
79
1255674
GM
3.8
No Model
231
V6
78-81
1255674
GM
3.8
No Model
231
V6
84-86
1255674
GM
3.8
No Model
231
V6
85-86
1255674
GM
3.8
No Model
231
V6
83
1255674
GM
3.8
No Model
231
V6
84-85
1255674
GM
3.8
No Model
231
V6
78-81
1255674
GM
3.8
No Model
231
V6
82
1255674
GM
4.1
No Model
252
V6
80-81
1255674
GM
4.1
No Model
252
V6
82-84
1255845
GM
3.7
No Model
225
V6
64-67
1255845
GM
3.8
No Model
231
V6
75-77
1255846
GM
3.8
No Model
231
V6
75-77
1257125
GM
3.2
No Model
196
V6
78-79
1257125
GM
3.8
GRAND NATIONAL
231
V6
86-88
1257125
GM
3.8
No Model
231
V6
78
1257125
GM
3.8
No Model
231
V6
79
1257125
GM
3.8
No Model
231
V6
78-81
1257125
GM
3.8
No Model
231
V6
82
1257125
GM
3.8
No Model
231
V6
84-86
1257125
GM
3.8
No Model
231
V6
85-86
1257125
GM
3.8
No Model
231
V6
83
1257125
GM
3.8
No Model
231
V6
84-85
1257125
GM
3.8
No Model
231
V6
78-81
1257125
GM
3.8
No Model
231
V6
82
1257125
GM
3.8
No Model
231
V6
83-87
1257125
GM
3.8
No Model
231
V6
75-77
1257125
GM
3.8
No Model
231
V6
78
1257125
GM
4.1
No Model
252
V6
80-81
1257125
GM
4.1
No Model
252
V6
82-84
125932
NAVISTAR
5.0
BD308
BD
308
L6
55-57
125932
NAVISTAR
5.0
No Model
308
L6
125932
NAVISTAR
5.0
No Model
308
L6
125932R
NAVISTAR
4.1
250
L6
125932R
NAVISTAR
4.4
U, B, BD
269
L6
40-69
125932R
NAVISTAR
5.0
BD308
BD
308
L6
55-57
125932R
NAVISTAR
5.0
No Model
308
L6
125932R
NAVISTAR
5.0
No Model
308
L6
125932R1
NAVISTAR
4.1
250
L6
125932R1
NAVISTAR
4.4
U, B, BD
269
L6
40-69
125932R1
NAVISTAR
5.0
BD308
BD
308
L6
55-57
125932R1
NAVISTAR
5.0
No Model
308
L6
125932R1
NAVISTAR
5.0
No Model
308
L6
1260718
GM
5.6
No Model
340
V8
64-67
1260718
GM
5.7
No Model
350
V8
68-74
1260718
GM
5.7
No Model
350
V8
74
1260718
GM
5.7
No Model
350
V8
75-77
1260718
GM
5.7
No Model
350
V8
77-80
1260877
GM
3.2
No Model
196
V6
78-79
1260877
GM
3.8
GRAND NATIONAL
231
V6
86-88
507
VIN

Casting
Manufacturer
Liter
Model
1260877
GM
3.8
No Model
231
V6
1260877
GM
3.8
No Model
231
V6
79
1260877
GM
3.8
No Model
231
V6
78-81
1260877
GM
3.8
No Model
231
V6
82
1260877
GM
3.8
No Model
231
V6
84-86
1260877
GM
3.8
No Model
231
V6
85-86
1260877
GM
3.8
No Model
231
V6
83
1260877
GM
3.8
No Model
231
V6
84-85
1260877
GM
3.8
No Model
231
V6
78-81
1260877
GM
3.8
No Model
231
V6
82
1260877
GM
3.8
No Model
231
V6
83-87
1260877
GM
3.8
No Model
231
V6
75-77
1260877
GM
3.8
No Model
231
V6
78
1260877
GM
4.1
No Model
252
V6
80-81
1260877
GM
4.1
No Model
252
V6
82-84
1261119
GM
5.6
No Model
340
V8
64-67
1261119
GM
5.7
No Model
350
V8
68-74
1261119
GM
5.7
No Model
350
V8
74
1261119
GM
5.7
No Model
350
V8
75-77
1261119
GM
5.7
No Model
350
V8
77-80
1265
BUDA
4.6
No Model
279
L6
1275884
FORD
2.4
No Model
149
L6
84-85
12821
CUMMINS
11.0
H672
672
L6
40-68
12821
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
1288739
GM
5.2
No Model
320
L8
37-52
1289678
GM
5.2
No Model
320
L8
37-52
1296057
GM
4.0
No Model
248
L8
37-55
1296057
GM
4.1
No Model
256
L6
54-56
12G1505A
MG
1.3
MK III MIDGET
78
L4
66-74
12G1505A
MG
1.3
No Model
76
L4
40-54
12H1354
MG
1.8
No Model
110
L4
65-72
12H195
MG
1.8
No Model
110
L4
65-72
12H4198
MG
1.8
No Model
110
L4
65-72
12H55CFD67B
MG
1.6
MARK I
99
L4
60-61
12H764A
AUSTIN
1.8
No Model
110
L4
64-80
12H764A
MG
1.8
No Model
110
L4
65-72
130011-D
WAUKESHA
0.0
130GS
L4
130186
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
130186
CUMMINS
14.0
NH230
NH
855
L6
130186
CUMMINS
14.0
NT SERIES
855
L6
130186
CUMMINS
14.0
NT855
NT
855
L6
130331F
CHRYSLER
3.0
RAMBLER
AMC
184
L6
49-61
1307660
GM
4.0
No Model
248
L8
37-55
1307660
GM
4.1
No Model
256
L6
54-56
13111-03010-D
TOYOTA
2.2
CAMRY
134
L4
90-00
131440R3
NAVISTAR
7.8
No Model
478
V8
56-78
1316540
CHRYSLER
3.5
No Model
218
L6
33-56
1316540
CHRYSLER
3.6
No Model
218
L6
65-71
1316540
CHRYSLER
3.8
No Model
230
L6
42-52
131850R1
NAVISTAR
8.2
No Model
501
L6
49-69
132251R1
NAVISTAR
8.2
No Model
501
L6
49-69
1323335
CHRYSLER
5.4
No Model
331
331
V8
54-56
1323335
CHRYSLER
5.4
No Model
CAR
331
V8
51-54
1323335
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
13241
NISSAN
1.3
No Model
A13
79
L4
74
1330331F
CHRYSLER
3.0
RAMBLER
AMC
184
L6
49-61
133440R
CHRYSLER
7.8
No Model
478
V8
69-77
133440R1
NAVISTAR
7.8
No Model
478
V8
56-78
133440R3
NAVISTAR
7.8
No Model
478
V8
56-78
508
VIN
5SFE
CID Cyl
Year
78
88-91

Casting
Manufacturer
Liter
Model
CID Cyl
Year
133441R3
NAVISTAR
9.0
No Model
1335001
CHRYSLER
5.4
No Model
331
549
V8
60-78
331
V8
1335001
CHRYSLER
5.4
No Model
54-56
CAR
331
V8
1335001
CHRYSLER
5.8
CHRYSLER 300B
51-54
354
V8
133894R
CHRYSLER
9.0
No Model
56-56
549
V8
133894R1
NAVISTAR
9.0
No Model
70-74
549
V8
133894R3
NAVISTAR
9.0
60-78
No Model
549
V8
1340600
GM
60-78
4.3
No Model
263
263
L8
13411-15
HINO
50-53
9.4
EM100
575
L6
1342995D
81-90
GM
4.3
No Model
264
V8
53-56
1342995D
GM
5.3
No Model
322
V8
53-56
1342999
GM
4.3
No Model
264
V8
53-56
1342999
GM
5.2
No Model
320
L8
37-52
1342999
GM
5.3
No Model
322
V8
53-56
1349429
GM
3.2
No Model
198
198
V6
62-65
1349929
GM
3.2
No Model
198
198
V6
62-65
135011
WAUKESHA
7.0
135DK
426
L6
135011
WAUKESHA
7.0
135GK
426
L6
135011
WAUKESHA
7.4
135GZ
451
L6
135011K
WAUKESHA
7.0
135DK
426
L6
135011K
WAUKESHA
7.0
135GK
426
L6
135011K
WAUKESHA
7.4
135GZ
451
L6
135011L
WAUKESHA
7.0
135DK
426
L6
135011L
WAUKESHA
7.0
135GK
426
L6
135030
CUMMINS
14.0
NH230
855
L6
135030
CUMMINS
14.0
NT SERIES
855
L6
135030
CUMMINS
14.0
NT855
855
L6
135111A
WAUKESHA
7.4
135GZ
451
L6
135411
GM
3.3
No Model
200
V6
78-79
1354N
GM
3.3
No Model
200
V6
78-79
1354N
GM
3.8
No Model
229
V6
83-84
1354N
GM
3.8
No Model
231
V6
82
1354N
GM
3.8
No Model
231
V6
83-87
1354N
GM
3.8
No Model
229
V6
80-82
135580
CUMMINS
4.4
POWER TORQUE 270
267
L4
135580
CUMMINS
5.1
C309
309
L4
135581
CUMMINS
4.4
POWER TORQUE 270
267
L4
135581
CUMMINS
5.1
C309
309
L4
1356
RENAULT
1.1
No Model
67
L4
1357898
GM
3.7
No Model
224
L6
40-47
1357898
GM
3.7
No Model
225
V6
64-67
1357898
GM
3.8
No Model
231
V6
75-77
1357898
JEEP
3.7
No Model
226
L6
54-65
1357899
GM
4.9
No Model
BUICK
300
V8
64-67
1361798
GM
6.6
No Model
B.
401
V8
59-66
1361798
GM
7.0
No Model
425
V8
63-66
136530
CUMMINS
14.0
NH230
NH
855
L6
136530
CUMMINS
14.0
NT SERIES
855
L6
136530
CUMMINS
14.0
NT855
855
L6
137580
CHRYSLER
5.7
No Model
350
V8
68-71
1375809
CHRYSLER
5.7
No Model
350
V8
68-71
1375809
GM
5.6
No Model
340
V8
64-67
1375809
GM
5.7
No Model
350
V8
68-74
1375809
GM
5.7
No Model
350
V8
73-77
1375809
GM
5.7
No Model
350
V8
73-77
1375809
GM
5.7
No Model
350
V8
74
1375809
GM
5.7
No Model
350
V8
75-77
1375809
GM
5.7
No Model
350
V8
77-80
1375809
JEEP
5.7
No Model
350
V8
68-71
509
VIN
NH
NT
R688
NT
88-91
88-91

Casting
Manufacturer
Liter
Model
CID Cyl
Year
1378346
CHRYSLER
5.7
No Model
1378346
GM
5.6
No Model
350
V8
68-71
340
V8
1378346
GM
5.7
No Model
64-67
350
V8
1378346
GM
5.7
74
No Model
350
V8
75-77
1378346
GM
1378346
JEEP
5.7
No Model
350
V8
77-80
5.7
No Model
350
V8
1378350
68-71
GM
4.9
No Model
300
V8
64-67
1378351
GM
3.7
No Model
224
L6
40-47
1378351
GM
3.7
No Model
225
V6
64-67
1378351
GM
3.8
No Model
231
V6
75-77
1378354
GM
3.7
No Model
224
L6
40-47
1378354
GM
3.7
No Model
225
V6
64-67
1378354
GM
3.8
No Model
231
V6
75-77
1378354
JEEP
3.7
No Model
226
L6
54-65
1379242
GM
6.6
No Model
400
V8
67-69
1379242
GM
7.0
No Model
430
V8
67-69
1379242
GM
7.5
No Model
455
V8
70-76
1396294
GM
6.6
No Model
B.
401
V8
59-66
1396294
GM
7.0
No Model
425
V8
63-66
1398346
GM
5.7
No Model
350
V8
68-74
1398346
GM
5.7
No Model
350
V8
73-77
1400188
CHRYSLER
4.3
No Model
265
L6
52-68
1400244
CHRYSLER
4.3
No Model
265
L6
52-68
140026D
HERCULES
3.7
D2300
226
L4
140026D
HERCULES
3.7
D-2300
226
L4
140026D
HERCULES
3.8
No Model
JXA
232
L6
140026D
HERCULES
4.0
No Model
JXC
245
L6
140026D
HERCULES
4.6
JXC
282
L6
140026D
HERCULES
5.2
No Model
320
L6
1400718
CHRYSLER
4.3
No Model
265
L6
1400-A3
REO
5.4
OH160
331
L6
1400-A3
REO
5.4
OH160
OH160
331
L6
55-57
1400-A3
REO
5.9
OH185
OH185
362
L6
59-67
140111B
WAUKESHA
8.6
140
525
L6
140111B
WAUKESHA
8.6
140GK
525
L6
140111B
WAUKESHA
9.1
140GZ
554
L6
140111B
WAUKESHA
9.1
F554G
554
L6
140111C
WAUKESHA
8.6
140
525
L6
140111C
WAUKESHA
8.6
140GK
525
L6
140111C
WAUKESHA
9.1
140GZ
554
L6
140111C
WAUKESHA
9.1
F554G
554
L6
140111J
WAUKESHA
8.6
140
525
L6
140111J
WAUKESHA
8.6
140GK
525
L6
140111J
WAUKESHA
9.1
140GZ
554
L6
140111J
WAUKESHA
9.1
F554G
554
L6
140111M
WAUKESHA
9.1
140GZC
554
L6
140211D
WAUKESHA
8.6
140
525
L6
140211D
WAUKESHA
8.6
140GK
525
L6
140211D
WAUKESHA
9.1
140GZ
554
L6
140211D
WAUKESHA
9.1
F554G
554
L6
14024236
GM
6.2
No Model
379
V8
82-86
14024236
GM
6.2
No Model
379
V8
87-93
14024236
GM
6.2
No Model
379
V8
82-86
14024236
GM
6.2
No Model
379
V8
87-93
1402538
CHRYSLER
4.0
No Model
241
L6
32-41
1402538
CHRYSLER
4.3
No Model
265
L6
52-68
1402538
CHRYSLER
4.4
BELVEDERE
270
V8
55-56
1402625
CHRYSLER
4.0
No Model
241
L6
32-41
1402625
CHRYSLER
4.3
No Model
265
L6
52-68
510
VIN
BUICK
JXD
52-68

Casting
Manufacturer
Liter
Model
1402625
140311
CHRYSLER
4.4
BELVEDERE
WAUKESHA
8.6
140
140311
WAUKESHA
8.6
140311
WAUKESHA
9.1
140311
WAUKESHA
140311A
CID Cyl
Year
270
V8
55-56
525
L6
140GK
525
L6
140GZ
554
L6
9.1
F554G
554
L6
WAUKESHA
8.6
140
525
L6
140311A
WAUKESHA
8.6
140GK
525
L6
140311A
WAUKESHA
9.1
140GZ
554
L6
140311A
WAUKESHA
9.1
F554G
554
L6
1406
TRIUMPH
1.5
No Model
FH
91
L4
73-80
1406
TRIUMPH
1.5
No Model
FM
91
L4
73-80
14077243
GM
2.0
No Model
121
L4
82-86
14077243
GM
2.0
S-10
121
L4
82-84
14086640
GM
4.3
No Model
262
V6
92-04
14086640
ISUZU
4.3
HOMBRE
262
V6
98
14088526
GM
5.0
CAMARO
305
V8
88-92
14088526
GM
5.0
No Model
305
V8
81-87
14088526
GM
5.0
No Model
305
V8
88-92
14088526
GM
5.0
No Model
305
V8
84-88
14088526
GM
5.0
No Model
305
V8
78-88
14088526
GM
5.0
No Model
305
V8
89-95
14088526
GM
5.0
No Model
305
V8
96-99
14088526
GM
5.7
CAMARO
350
V8
92-97
14088526
GM
5.7
CAMARO, CORVETTE
350
V8
85-92
14088526
GM
5.7
CORVETTE
350
V8
96-96
14088526
GM
5.7
No Model
350
V8
80-88
14088526
GM
5.7
No Model
350
V8
89-95
14088526
GM
5.7
No Model
350
V8
86-96
14088526
GM
5.7
No Model
350
V8
86-96
14088526
GM
5.7
No Model
350
V8
89-92
14088526
GM
5.7
No Model
350
V8
79-88
14088526
GM
5.7
No Model
350
V8
96-02
14088532
GM
5.7
CAMARO
350
V8
92-97
14088532
GM
5.7
CAMARO, CORVETTE
350
V8
85-92
14088532
GM
5.7
No Model
350
V8
80-88
14088532
GM
5.7
No Model
350
V8
89-95
14088532
GM
5.7
No Model
350
V8
86-96
14088532
GM
5.7
No Model
350
V8
89-92
14088532
GM
5.7
No Model
350
V8
79-88
14088532
GM
5.7
No Model
350
V8
96-02
14088535
GM
5.0
CAMARO
305
V8
88-92
14088535
GM
5.0
No Model
305
V8
81-87
14088535
GM
5.0
No Model
305
V8
88-92
14088535
GM
5.0
No Model
305
V8
84-88
14088535
GM
5.0
No Model
305
V8
78-88
14088535
GM
5.0
No Model
305
V8
96-99
14088535
GM
5.7
CAMARO
350
V8
92-97
14088535
GM
5.7
CAMARO, CORVETTE
350
V8
85-92
14088535
GM
5.7
CORVETTE
350
V8
96-96
14088535
GM
5.7
No Model
350
V8
80-88
14088535
GM
5.7
No Model
350
V8
89-95
14088535
GM
5.7
No Model
350
V8
86-96
14088535
GM
5.7
No Model
350
V8
89-92
14088535
GM
5.7
No Model
350
V8
79-88
14088640
GM
4.3
No Model
262
V6
90-91
14088640
GM
4.3
No Model
262
V6
85-86
14088640
GM
4.3
No Model
262
V6
92-95
14088640
GM
4.3
No Model
262
V6
92-04
14088640
GM
4.3
No Model
262
V6
96-00
511
VIN

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
14088640
GM
4.3
No Model
14088640
ISUZU
4.3
HOMBRE
262
V6
86-97
262
V6
14088640
ISUZU
4.3
HOMBRE
98
262
V6
97-99
14088835
GM
5.0
14088835
GM
5.0
No Model
305
V8
88-92
No Model
305
V8
14088835
GM
78-88
5.0
No Model
305
V8
14088840
89-95
GM
4.3
No Model
262
V6
90-91
14088840
GM
4.3
No Model
262
V6
85-86
14088840
GM
4.3
No Model
262
V6
96-00
14088840
GM
4.3
No Model
262
V6
86-97
14088840
ISUZU
4.3
HOMBRE
262
V6
97-99
14090003
GM
2.0
No Model
122
L4
87-88
14090003
GM
2.0
No Model
122
L4
87-89
1409421
CHRYSLER
5.4
No Model
331
331
V8
54-56
1409421
CHRYSLER
5.4
No Model
CAR
331
V8
51-54
1409421
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
14096
MERCRUISER
3.0
No Model
IND
181
L4
74-93
1409624
CHRYSLER
4.8
No Model
A/J
290
V8
66-69
14096624
MERCRUISER
3.0
No Model
IND
181
L4
74-93
14097044
GM
7.4
No Model
454
V8
96-00
14097044
GM
7.4
No Model
454
V8
91-97
14097044
GM
8.2
ENGINE 502
502
V8
96-01
14097044
MERCRUISER
8.2
500 BULLDOG
HJ
502
V8
140N
GM
1.6
CHEVETTE
98
L4
82-87
140N
GM
1.6
CHEVETTE
98
L4
76-77
140N
GM
1.6
CHEVETTE
98
L4
78-79
141045
NAVISTAR
5.0
304A
304
V8
58-80
1414343
GM
5.3
LA SALLE
322
V8
38-40
1414343
GM
5.7
No Model
62
346
V8
40-48
1414346
GM
5.7
No Model
62
346
V8
40-48
141779R1
NAVISTAR
4.3
400
264
L6
63-74
141780R1
NAVISTAR
4.3
400
264
L6
63-74
1419421
CHRYSLER
5.4
No Model
331
331
V8
54-56
1419421
CHRYSLER
5.4
No Model
CAR
331
V8
51-54
1419421
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
1419421
CHRYSLER
5.8
No Model
354
V8
56-58
1424103
GM
5.3
LA SALLE
322
V8
38-40
1424103
GM
5.7
No Model
62
346
V8
40-48
142690
CUMMINS
12.8
V8E-235
784
V8
142770
CUMMINS
14.0
NH230
855
L6
142770
CUMMINS
14.0
NT SERIES
855
L6
142770
CUMMINS
14.0
NT855
NT
855
L6
1428901
GM
5.3
LA SALLE
322
V8
38-40
1428901
GM
5.7
No Model
62
346
V8
40-48
1428903
GM
5.3
LA SALLE
322
V8
38-40
1428903
GM
5.7
No Model
62
346
V8
40-48
142960
CUMMINS
14.0
NH230
NH
855
L6
142960
CUMMINS
14.0
NT SERIES
855
L6
142960
CUMMINS
14.0
NT855
NT
855
L6
143
GM
No Model
143140
CUMMINS
24.4
VT1486
143140
CUMMINS
28.0
VT1710
VTA
144
GM
No Model
14401G
CUMMINS
11.0
H672
14401G
CUMMINS
12.2
1440476
GM
1440476
GM
145011C
WAUKESHA
10.5
145011C
WAUKESHA
12.8
NH
88-91
88-91
200
V6
78-79
1486
V 12
60-70
1710
V 12
366
V8
89-90
672
L6
40-68
NH 220 SERIES
NH
743
L6
5.3
LA SALLE
322
V8
38-40
5.7
No Model
62
346
V8
40-48
145GS
638
L6
145GK
779
L6
3.3
6.0
512

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
145011C
WAUKESHA
13.4
145GZ
817
L6
145011C
WAUKESHA
13.4
F817G
817
L6
145011J
WAUKESHA
10.5
145GS
638
L6
145011J
WAUKESHA
12.8
145GK
779
L6
145011J
WAUKESHA
13.4
145GZ
817
L6
145011J
WAUKESHA
13.4
F817G
817
L6
145011N
WAUKESHA
10.5
145GS
638
L6
145011N
WAUKESHA
13.4
145GZ
817
L6
145011N
WAUKESHA
13.4
F817G
817
L6
145111C
WAUKESHA
10.5
145GS
638
L6
145111C
WAUKESHA
12.8
145GK
779
L6
145111C
WAUKESHA
13.4
145GZ
817
L6
145111C
WAUKESHA
13.4
F817G
817
L6
145211A
WAUKESHA
10.5
145GS
638
L6
145211A
WAUKESHA
12.8
145GK
779
L6
145211A
WAUKESHA
13.4
145GZ
817
L6
145211A
WAUKESHA
13.4
F817G
817
L6
145211D
WAUKESHA
10.5
145GS
638
L6
145211D
WAUKESHA
12.8
145GK
779
L6
145211D
WAUKESHA
13.4
145GZ
817
L6
145211D
WAUKESHA
13.4
F817G
817
L6
145311C
WAUKESHA
12.8
145GK
779
L6
145311-C
WAUKESHA
13.4
145GZ
817
L6
145311-C
WAUKESHA
13.4
F817G
817
L6
145411
WAUKESHA
10.5
145GS
638
L6
145411
WAUKESHA
12.8
145GK
779
L6
145411
WAUKESHA
13.4
145GZ
817
L6
145411
WAUKESHA
13.4
F817G
817
L6
145411A
WAUKESHA
10.5
145GS
638
L6
145411A
WAUKESHA
12.8
145GK
779
L6
145411A
WAUKESHA
13.4
145GZ
817
L6
145411A
WAUKESHA
13.4
F817G
817
L6
145480
CUMMINS
9.6
No Model
V6
588
V6
1455101
GM
5.4
No Model
CAD
331
V8
145830
CUMMINS
12.8
V8E-235
784
V8
145840
CUMMINS
9.6
No Model
V6
588
V6
1462473
GM
5.4
No Model
CAD
331
V8
49-55
1463340
GM
5.4
No Model
CAD
331
V8
49-55
1463340
GM
6.0
No Model
365
V8
56-58
1463348
GM
6.0
No Model
365
V8
58-62
1463473
GM
5.4
No Model
CAD
331
V8
49-55
146450
CUMMINS
6.6
J SERIES
401
L6
146450
CUMMINS
6.6
J160
401
L6
146450
CUMMINS
7.6
C 180
464
L6
146460
CUMMINS
24.4
VT1486
146460
CUMMINS
28.0
VT1710
1467292
GM
6.4
1467925
GM
6.4
1469263
GM
1469265
GM
147
49-55
1486
V 12
1710
V 12
No Model
390
V8
63
No Model
390
V8
59-62
6.4
No Model
390
V8
59-62
6.4
No Model
390
V8
59-62
GM
3.3
No Model
200
V6
78-79
1477634
GM
6.4
No Model
390
V8
63
1481021
GM
7.0
No Model
429
V8
63-67
148111D
WAUKESHA
779
L6
1481267
GM
429
V8
148311-H
WAUKESHA
12.8
148DK
779
L6
148311-J
WAUKESHA
12.8
148DK
779
L6
148311M
WAUKESHA
12.8
148DK
779
L6
1483338
CHRYSLER
4.0
No Model
241
L6
12.8
7.0
VTA
M
CAD
148DK
No Model
513
CAD
60-70
63-67
32-41

Casting
Manufacturer
Liter
Model
1483338
CHRYSLER
4.3
No Model
1483338
CHRYSLER
4.4
BELVEDERE
148350
CUMMINS
9.6
No Model
1486340
GM
7.0
1486424
GM
7.0
1486424
GM
1486424
CID Cyl
Year
265
L6
52-68
270
V8
55-56
V6
588
V6
No Model
CAD
429
V8
63-67
No Model
425
V8
77-79
7.0
No Model
425
V8
77-79
GM
7.7
No Model
472
V8
68-74
1488340
GM
7.0
No Model
CAD
429
V8
63-67
1489-A3
REO
6.4
No Model
391
V8
1489-A3
REO
7.2
No Model
443
V8
1495094
GM
8.2
No Model
500
V8
70-73
1495094
GM
8.2
No Model
500
V8
70-76
1495095
GM
8.2
No Model
500
V8
70-73
1495095
GM
8.2
No Model
500
V8
70-76
1496793
GM
8.2
No Model
500
V8
70-73
1496793
GM
8.2
No Model
500
V8
70-76
14H
PEUGEOT
2.2
No Model
132
L4
87-90
14H
PEUGEOT
2.2
No Model
ZDJL
132
L4
85-86
151045
NAVISTAR
4.3
No Model
266
266
V8
66-71
151045
NAVISTAR
4.4
U, B, BD
269
L6
40-69
151045
NAVISTAR
5.0
304A
304
V8
58-80
151045R1
NAVISTAR
4.3
No Model
266
V8
66-71
151045R1
NAVISTAR
4.4
U, B, BD
269
L6
40-69
151045R1
NAVISTAR
5.0
304A
304
V8
58-80
151045R2
NAVISTAR
4.3
No Model
266
V8
66-71
151045R2
NAVISTAR
4.4
U, B, BD
269
L6
40-69
151045R2
NAVISTAR
5.0
304A
304
V8
58-80
151046
NAVISTAR
4.3
No Model
266
V8
66-71
151046
NAVISTAR
4.4
U, B, BD
269
L6
40-69
151046
NAVISTAR
5.0
304A
304
V8
58-80
151046R1
NAVISTAR
4.3
No Model
266
V8
66-71
151046R1
NAVISTAR
4.4
U, B, BD
269
L6
40-69
151046R1
NAVISTAR
5.0
304A
304
V8
58-80
151046R2
NAVISTAR
4.3
No Model
266
V8
66-71
151046R2
NAVISTAR
4.4
U, B, BD
269
L6
40-69
151046R2
NAVISTAR
5.0
304A
304
V8
58-80
151327
NAVISTAR
5.7
No Model
345
V8
76-81
151327
NAVISTAR
6.4
No Model
392
V8
56-83
151327R1
NAVISTAR
5.7
No Model
345
V8
76-81
151327R1
NAVISTAR
6.4
No Model
392
V8
56-83
151328
NAVISTAR
5.7
No Model
345
V8
76-81
151328R2
NAVISTAR
5.7
No Model
345
V8
76-81
151328R2
NAVISTAR
6.4
No Model
392
V8
56-83
1521436
CHRYSLER
6.8
No Model
413
V8
59-76
1521436
CHRYSLER
6.8
No Model
413
V8
59-77
1523335
CHRYSLER
5.4
No Model
331
331
V8
54-56
1523335
CHRYSLER
5.4
No Model
CAR
331
V8
51-54
1523335
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
1547105
STUDEBAKER
2.8
No Model
170
L6
55-60
155025E
HERCULES
3.7
D2300
226
L4
155025E
HERCULES
3.7
D-2300
226
L4
155025E
HERCULES
3.8
No Model
JXA
232
L6
155025E
HERCULES
4.0
No Model
JXC
245
L6
155025E
HERCULES
4.6
No Model
282
L6
155025E
HERCULES
5.2
No Model
320
L6
155026E
HERCULES
2.7
JX4E-3
164
L4
155026E
HERCULES
2.7
JX4E-5
164
L4
155026E
HERCULES
3.1
JX4C-3
188
L4
155026E
HERCULES
3.1
JX4C-5
188
L4
514
VIN
S
S
266
266
266
266
266
JXC

Casting
Manufacturer
Liter
Model
155026E
HERCULES
3.1
No Model
191
L6
155026E
HERCULES
3.1
No Model
191
L6
155026E
HERCULES
3.3
JX4L-C3
199
L4
155026E
HERCULES
3.3
JX4L-C5
199
L4
155026E
HERCULES
3.3
JX4L-CER
199
L4
155026E
HERCULES
3.5
JX4D-3
214
L4
155026E
HERCULES
3.7
JX4L-D3
226
L4
155026E
HERCULES
3.7
JX4L-D5
226
L4
155026E
HERCULES
3.7
JX4L-DER
226
L4
155026E
HERCULES
5.2
JX4D-5
320
L4
1550774
STUDEBAKER
2.7
No Model
170
L6
55-64
1550774
STUDEBAKER
2.8
No Model
170
L6
55-60
15527ZZ163
HILLMAN
1.6
ALPINE
97
L4
61-65
15549G
WAUKESHA
47.4
LRD
2894
L6
15549G
WAUKESHA
47.4
LRO
2894
L6
15549G
WAUKESHA
47.4
No Model
2894
L6
15549G
WAUKESHA
47.4
No Model
2894
L6
15549G
WAUKESHA
57.7
LRZ
3520
L6
1557708
CHRYSLER
3.7
No Model
225
L6
76-87
1557708
CHRYSLER
3.8
No Model
230
L6
42-52
1557708
CHRYSLER
3.8
No Model
230
L6
42-52
156025E
HERCULES
2.7
JX4E-3
164
L4
156025E
HERCULES
2.7
JX4E-5
164
L4
156025E
HERCULES
3.1
JX4C-3
188
L4
156025E
HERCULES
3.1
JX4C-5
188
L4
156025E
HERCULES
3.1
No Model
191
L6
156025E
HERCULES
3.1
No Model
191
L6
156025E
HERCULES
3.3
JX4L-C3
199
L4
156025E
HERCULES
3.3
JX4L-C5
199
L4
156025E
HERCULES
3.3
JX4L-CER
199
L4
156025E
HERCULES
3.5
JX4D-3
214
L4
156025E
HERCULES
3.7
JX4L-D3
226
L4
156025E
HERCULES
3.7
JX4L-D5
226
L4
156025E
HERCULES
3.7
JX4L-DER
226
L4
156025E
HERCULES
5.2
JX4D-5
320
L4
156026E
HERCULES
0.9
NXA
57
L2
156026E
HERCULES
1.8
IXA, IXB3
113
L4
156026E
HERCULES
2.2
IXA, IXB3
133
L4
156026E
HERCULES
2.2
IXA, IXB3
133
L4
156028E
HERCULES
2.7
JX4E-3
164
L4
156028E
HERCULES
2.7
JX4E-5
164
L4
156028E
HERCULES
3.1
JX4C-3
188
L4
156028E
HERCULES
3.1
JX4C-5
188
L4
156028E
HERCULES
3.1
No Model
191
L6
156028E
HERCULES
3.1
No Model
191
L6
156028E
HERCULES
3.3
JX4L-C3
199
L4
156028E
HERCULES
3.3
JX4L-C5
199
L4
156028E
HERCULES
3.3
JX4L-CER
199
L4
156028E
HERCULES
3.5
JX4D-3
214
L4
156028E
HERCULES
3.7
JX4L-D3
226
L4
156028E
HERCULES
3.7
JX4L-D5
226
L4
156028E
HERCULES
3.7
JX4L-DER
226
L4
156028E
HERCULES
5.2
JX4D-5
320
L4
156290
CUMMINS
6.6
J SERIES
401
L6
156290
CUMMINS
6.6
J160
401
L6
156290
CUMMINS
7.6
C 180
464
L6
156290
CUMMINS
9.6
No Model
588
V6
156639
HUDSON
3.5
No Model
212
L6
156920
CUMMINS
9.6
No Model
588
V6
515
VIN
1E
C
V6
CID Cyl
Year
32-47

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
156920
CUMMINS
9.6
No Model
588
V6
158370
CUMMINS
12.8
V8E-235
784
V8
159620
CUMMINS
9.6
No Model
V6
588
V6
1609142
GM
6.0
No Model
368
V8
80-84
1609142
GM
6.0
No Model
368
V8
80-84
1609142
GM
7.0
No Model
425
V8
77-79
1609142
GM
7.0
No Model
425
V8
77-79
1609142R
GM
7.0
No Model
425
V8
77-79
1609142R
GM
7.0
No Model
425
V8
77-79
160914R
GM
7.7
No Model
472
V8
68-74
161360
CUMMINS
9.6
No Model
588
V6
161360
CUMMINS
9.6
No Model
588
V6
1616123
CHRYSLER
5.6
No Model
340
V8
68-73
1617184
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
1617590
GM
4.1
ELDORADO
252
V8
87
1617590
GM
4.1
No Model
252
V8
87-88
1617590
GM
4.1
No Model
252
V8
87-88
1617590
GM
4.1
No Model
252
V8
82-86
1617590
GM
4.5
No Model
272
V8
90
1617590
GM
4.5
No Model
272
V8
88
1617590
GM
4.5
No Model
272
V8
88-89
1619421
CHRYSLER
5.4
No Model
331
331
V8
54-56
1619421
CHRYSLER
5.4
No Model
CAR
331
V8
51-54
1619421
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
1619467
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
161960
CUMMINS
784
V8
1619647
1619647
12.8
V8E-235
CHRYSLER
5.4
No Model
331
331
V8
54-56
CHRYSLER
5.4
No Model
CAR
331
V8
51-54
1619647
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
162178
HUDSON
3.5
No Model
212
L6
32-47
162186
CUMMINS
14.0
NH230
855
L6
162186
CUMMINS
14.0
NT SERIES
855
L6
162186
CUMMINS
14.0
NT855
855
L6
162187
CUMMINS
7.3
No Model
448
L4
162187
CUMMINS
8.1
No Model
495
L4
162518
HUDSON
3.5
No Model
212
L6
32-47
1626123
CHRYSLER
4.5
No Model
273
V8
62-69
1626123
CHRYSLER
5.0
FURY
303
V8
56-58
1626123
CHRYSLER
5.1
No Model
313
V8
57-66
1626123
CHRYSLER
5.3
No Model
326
V8
55-57
1628091
GM
4.1
ELDORADO
252
V8
87
1628091
GM
4.1
No Model
252
V8
87-88
1628091
GM
4.1
No Model
252
V8
82-86
1628091
GM
4.5
No Model
272
V8
90
1628091
GM
4.5
No Model
272
V8
88-89
162909
GM
4.1
ELDORADO
252
V8
87
162909
GM
4.1
No Model
252
V8
87-88
162909
GM
4.1
No Model
252
V8
82-86
162909
GM
4.5
No Model
272
V8
90
162909
GM
4.5
No Model
272
V8
88-89
1629091
GM
4.1
ELDORADO
252
V8
87
1629091
GM
4.1
ELDORADO
252
V8
87
1629091
GM
4.1
No Model
252
V8
87-88
1629091
GM
4.1
No Model
252
V8
87-88
1629091
GM
4.1
No Model
252
V8
82-86
1629091
GM
4.5
No Model
272
V8
90
1629091
GM
4.5
No Model
272
V8
88
1629091
GM
4.5
No Model
272
V8
88
1629091
GM
4.5
No Model
272
V8
88-89
516
NH
NT
273
88-91

Casting
Manufacturer
Liter
Model
162C-500
ALLIS CHALMERS
1.0
62
L4
162C-500
CONTINENTAL
1.0
62
L4
1630432
CHRYSLER
5.3
No Model
325
325
V8
1630432
CHRYSLER
5.4
DESOTO
330
330
V8
56
1630432
CHRYSLER
5.6
DESOTO
A/J 2
341
V8
56-57
1630932
CHRYSLER
5.2
No Model
315
315
V8
55-57
1630937
CHRYSLER
4.5
BELVEDERE
277
V8
56-57
1632077
CHRYSLER
4.5
No Model
273
V8
62-69
1632077
CHRYSLER
5.0
FURY
303
V8
56-58
1632077
CHRYSLER
5.1
No Model
313
V8
57-66
1632077
CHRYSLER
5.3
No Model
326
V8
55-57
1632077
CHRYSLER
5.6
No Model
340
V8
68-73
1635690
CHRYSLER
5.2
No Model
315
315
V8
55-57
1635690
CHRYSLER
5.3
No Model
325
325
V8
55-57
1635690
CHRYSLER
5.6
DESOTO
A/J 2
341
V8
56-57
1635690
CHRYSLER
5.8
CHRYSLER 300B
354
V8
56-56
1635785
CHRYSLER
5.2
No Model
315
315
V8
55-57
1635785
CHRYSLER
5.3
No Model
325
325
V8
55-57
1635785
CHRYSLER
5.4
DESOTO
330
330
V8
56
1635785
CHRYSLER
5.6
DESOTO
A/J 2
341
V8
56-57
1639538
CHRYSLER
5.3
No Model
325
325
V8
55-57
1646737
GM
4.1
ELDORADO
252
V8
87
1646737
GM
4.1
No Model
252
V8
87-88
1646737
GM
4.1
No Model
252
V8
87-88
1646737
GM
4.1
No Model
252
V8
82-86
1646737
GM
4.5
No Model
272
V8
90
1646737
GM
4.5
No Model
272
V8
88
1646737
GM
4.5
No Model
272
V8
88
1646737
GM
4.5
No Model
272
V8
88-89
1648455
GM
4.1
No Model
252
V8
82-86
1648455
GM
4.5
No Model
272
V8
88
1650270
CHRYSLER
4.5
BELVEDERE
277
V8
56-57
16525E
HERCULES
7.8
No Model
474
L6
16525E
HERCULES
8.2
No Model
RXB
501
L6
16525E
HERCULES
8.7
No Model
DRXC
529
L6
16525E
HERCULES
9.1
No Model
558
L6
166088R1
NAVISTAR
4.3
400
264
L6
63-74
1671108
CHRYSLER
4.0
No Model
241
L6
32-41
1671108
CHRYSLER
4.3
No Model
265
L6
52-68
1671108
CHRYSLER
4.4
BELVEDERE
270
V8
55-56
1673755
CHRYSLER
6.4
HEMI
392
V8
57-58
168557
MG
1.1
No Model
70
L4
40-56
168557
MG
1.3
MK III MIDGET
78
L4
66-74
168557
MG
1.3
No Model
76
L4
40-54
170
GM
3.8
No Model
231
V6
95-01
1700557C1
NAVISTAR
9.0
No Model
551
V8
78-85
17011
WAUKESHA
7.3
6SRLR
447
L6
17011
WAUKESHA
7.6
6SRLR
462
L6
17011
WAUKESHA
8.7
6SRLR
525
L6
17011B
WAUKESHA
7.3
6SRLR
447
L6
17011B
WAUKESHA
7.6
6SRLR
462
L6
17011B
WAUKESHA
8.7
6SRLR
525
L6
1703855
CUMMINS
3.4
No Model
210
L6
1703855
CUMMINS
3.4
No Model
210
L6
1703855
CUMMINS
3.4
No Model
210
L6
1703855
ONAN
3.4
L SERIES
210
L6
1703855
ONAN
3.4
L SERIES
210
L6
1728C1
NAVISTAR
3.2
No Model
199
L6
64-67
1730432
CHRYSLER
5.2
No Model
315
V8
55-57
517
VIN
273
TURBO
315
CID Cyl
Year
55-57

Casting
Manufacturer
Liter
Model
17311A
WAUKESHA
7.3
6SRLR
447
L6
17311A
WAUKESHA
7.6
6SRLR
462
L6
17311A
WAUKESHA
8.7
6SRLR
525
L6
1731658
CHRYSLER
4.0
No Model
241
L6
32-41
1731658
CHRYSLER
4.3
No Model
265
L6
52-68
1731658
CHRYSLER
4.4
BELVEDERE
270
V8
55-56
1732557
CHRYSLER
4.5
BELVEDERE
277
V8
56-57
1732559
CHRYSLER
5.0
FURY
303
V8
56-58
1732559
CHRYSLER
5.1
No Model
313
V8
57-66
1732559
CHRYSLER
5.3
No Model
326
V8
55-57
1732559
CHRYSLER
5.6
No Model
340
V8
68-73
1732610
CHRYSLER
4.5
No Model
273
V8
62-69
1732610
CHRYSLER
5.0
FURY
303
V8
56-58
1732610
CHRYSLER
5.1
No Model
313
V8
57-66
1732610
CHRYSLER
5.6
No Model
340
V8
68-73
173311A
WAUKESHA
7.3
6SRLR
447
L6
173311A
WAUKESHA
7.6
6SRLR
462
L6
173311A
WAUKESHA
8.7
6SRLR
525
L6
1735785
CHRYSLER
5.6
DESOTO
A/J 2
341
V8
56-57
173604
CHRYSLER
5.3
No Model
325
325
V8
55-57
1736044
CHRYSLER
5.2
No Model
315
315
V8
55-57
1736044
CHRYSLER
5.6
DESOTO
A/J 2
341
V8
56-57
1736044
CHRYSLER
5.7
DESOTO
345
V8
-57
1737641
CHRYSLER
5.9
No Model
361
V8
80-81
1737641
CHRYSLER
5.9
No Model
TRK
361
V8
57-78
1737641
CHRYSLER
6.6
No Model
400
V8
75-76
1737641
CHRYSLER
6.6
No Model
400
V8
74-78
1737642
CHRYSLER
5.9
No Model
361
V8
80-81
1737642
CHRYSLER
5.9
No Model
TRK
361
V8
57-78
1737642
CHRYSLER
6.6
No Model
400
V8
75-76
1737642
CHRYSLER
6.6
No Model
400
V8
72-78
1737642
CHRYSLER
6.6
No Model
400
V8
74-78
1737642
MG
1.1
No Model
70
L4
40-56
1737642
MG
1.3
MK III MIDGET
78
L4
66-74
1737642
MG
1.3
No Model
76
L4
40-54
1739538
CHRYSLER
5.2
No Model
315
315
V8
55-57
1739538
CHRYSLER
5.3
No Model
325
325
V8
55-57
1739538
CHRYSLER
5.6
DESOTO
A/J 2
341
V8
56-57
1739589
CHRYSLER
3.7
No Model
225
L6
76-87
1739589
CHRYSLER
3.8
No Model
230
L6
42-52
1746N
TRIUMPH
2.0
No Model
CL
122
L4
75-81
1746N
TRIUMPH
2.0
No Model
CV
122
L4
75-81
17527D
HERCULES
7.8
No Model
474
L6
17527D
HERCULES
8.2
No Model
RXB
501
L6
17527D
HERCULES
8.7
No Model
DRXC
529
L6
17527D
HERCULES
9.1
No Model
558
L6
17527E
HERCULES
8.2
No Model
RXB
501
L6
17527E
HERCULES
8.7
No Model
DRXC
529
L6
17527E
HERCULES
9.1
No Model
558
L6
17552TJCSB
PERKINS
3.5
212
212
L4
1755674
GM
3.8
GRAND NATIONAL
231
V6
86-88
1755674
GM
3.8
No Model
231
V6
78-81
1755674
GM
3.8
No Model
231
V6
82
1755674
GM
3.8
No Model
231
V6
83
1755674
GM
3.8
No Model
231
V6
84-85
1755674
GM
3.8
No Model
231
V6
78-81
1755674
GM
3.8
No Model
231
V6
82
1755674
GM
3.8
No Model
231
V6
83-87
1755674
GM
3.8
No Model
231
V6
75-77
518
VIN
273
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
1755674
GM
3.8
No Model
176254
STUDEBAKER
2.8
No Model
176254
STUDEBAKER
3.0
No Model
176H
CHRYSLER
2.5
DAKOTA
1774
TRIUMPH
1.5
No Model
1774
TRIUMPH
1.5
1784YD
NAVISTAR
1784YD
Year
231
V6
78
169
L6
43-54
185
L6
55-58
153
L4
89-92
FH
91
L4
73-80
No Model
FM
91
L4
73-80
3.8
No Model
GRD
233
L6
41-58
NAVISTAR
4.0
No Model
242
L6
1784YD
NAVISTAR
4.3
400
264
L6
63-74
1784YF
NAVISTAR
3.5
GRD214A
214
L6
50-55
1784YG
NAVISTAR
3.5
GRD214A
214
L6
50-55
1784YH
NAVISTAR
3.5
GRD214A
214
L6
50-55
1784YK
NAVISTAR
3.4
HD213
213
L6
37-49
1784YK
NAVISTAR
3.5
GRD214A
214
L6
50-55
1784YM
NAVISTAR
3.5
GRD214A
214
L6
50-55
1784YP
NAVISTAR
3.8
No Model
233
L6
41-58
1784YP
NAVISTAR
4.0
No Model
242
L6
1784YP
NAVISTAR
4.3
400
264
L6
63-74
1792-A3
REO
5.4
OH170
OH170
331
L6
57-67
1792-A3
REO
5.9
OH185
OH185
362
L6
59-67
1792-A3
REO
6.6
OH200
400
L6
66-70
1792-A3
REO
6.6
OH200
400
L6
61-67
179440
CUMMINS
12.8
V8E-235
784
V8
179450
CUMMINS
9.6
No Model
588
V6
179450
CUMMINS
9.6
No Model
588
V6
17M
NISSAN
1.5
PULSAR
E15
91
L4
82-83
1800311401
MERCEDES BENZ
2.2
220
180
140
L6
64-69
180107
WAUKESHA
4.3
190GL
265
L6
180111
WAUKESHA
2.4
180GL
144
L4
1802224C92
FORD
6.9
No Model
420
V8
83-88
1802224C92
FORD
7.3
No Model
444
V8
94-95
1802224C92
FORD
7.3
No Model
444
V8
88-94
1802224C92
NAVISTAR
6.9
No Model
420
V8
83-88
1802224C92
NAVISTAR
7.3
No Model
444
V8
88-94
1802224C93
FORD
6.9
No Model
420
V8
83-88
1802224C93
FORD
7.3
No Model
444
V8
94-95
1802224C93
FORD
7.3
No Model
444
V8
88-94
1802224C93
NAVISTAR
6.9
No Model
420
V8
83-88
1802224C93
NAVISTAR
7.3
No Model
444
V8
88-94
18025E
HERCULES
4.0
WXA
242
L6
18025E
HERCULES
4.9
WXB
298
L6
18025E
HERCULES
5.6
WXC
339
L6
18025E
HERCULES
5.9
WXC-2
361
L6
18025E
HERCULES
5.9
WXLC
358
L6
18025E
HERCULES
6.3
No Model
383
L6
18025E
HERCULES
6.3
WXC-3
383
L6
18025E
HERCULES
6.6
WXLC-3
404
L6
18025E
HERCULES
6.6
WXLD
404
L6
18025E
HERCULES
6.6
WXLD-ER
404
L6
1803420C1
FORD
6.9
No Model
420
V8
83-88
1803420C1
NAVISTAR
6.9
No Model
420
V8
83-88
1805420
FORD
6.9
No Model
420
V8
83-88
1805420
FORD
7.3
No Model
444
V8
88-94
1805420
NAVISTAR
6.9
No Model
420
V8
83-88
1805420
NAVISTAR
7.3
No Model
444
V8
88-94
1805420C1
FORD
6.9
No Model
420
V8
83-88
1805420C1
FORD
7.3
No Model
444
V8
94-95
1805420C1
FORD
7.3
No Model
444
V8
88-94
1805420C1
NAVISTAR
6.9
No Model
420
V8
83-88
519
CID Cyl
GRD
OH200

Casting
Manufacturer
Liter
Model
1805420C1
NAVISTAR
7.3
No Model
180590
STUDEBAKER
4.7
No Model
180590
STUDEBAKER
5.0
No Model
1809954C1
NAVISTAR
5.9
DT360
181
NISSAN
1.3
No Model
181211
OLIVER
2.1
No Model
181211
OLIVER
2.3
No Model
181211
OLIVER
2.3
No Model
181211
OLIVER
2.5
No Model
181211
OLIVER
2.5
No Model
181211
WAUKESHA
3.2
180DL
1812320C91
FORD
7.3
No Model
181411
OLIVER
2.1
No Model
181411
OLIVER
2.3
No Model
181411
OLIVER
2.3
No Model
181411
OLIVER
2.5
No Model
181411
OLIVER
2.5
No Model
181411
WAUKESHA
2.4
181411
WAUKESHA
181411A
WAUKESHA
181411A
VIN
CID Cyl
Year
444
V8
88-94
289
V8
57-64
304
V8
63-64
DT
360
L6
87-94
A13
79
L4
74
129
L4
49-54
144
L4
55-59
144
L4
55-59
155
L4
59-67
144
L4
55-59
194
L4
444
V8
95-05
129
L4
49-54
144
L4
55-59
144
L4
55-59
155
L4
59-67
144
L4
55-59
180DLC
144
L4
2.4
180GL
144
L4
2.0
121
121
L4
WAUKESHA
2.5
155
155
L4
181411A
WAUKESHA
2.5
VRD155
155
L4
181411A
WAUKESHA
2.5
VRG155
155
L4
181411A
WAUKESHA
3.8
VRD232
232
L6
181411A
WAUKESHA
3.8
VRG232
232
L6
181411A
WAUKESHA
10.5
145HS
638
L6
1816975C1
NAVISTAR
7.6
DT466C
1990
466
L6
90-93
1818200C3
FORD
7.3
No Model
444
V8
95-05
1818200C3
NAVISTAR
7.3
T444E
T444E
444
V8
94-04
182011
WAUKESHA
2.1
180GB
125
L4
182111
MILITARY STD
2.0
No Model
125
L4
182111
MILITARY STD
2.4
No Model
145
L4
182111
WAUKESHA
2.1
180GB
125
L4
1821436
CHRYSLER
6.8
No Model
413
V8
59-77
1821436
CHRYSLER
7.0
HEMI
426
V8
66-71
1821436
CHRYSLER
7.2
No Model
440
V8
76-76
1821436
CHRYSLER
7.2
No Model
440
V8
66-73
1821436
CHRYSLER
7.2
No Model
440
V8
74-76
1821913C1
NAVISTAR
8.7
530
530
L6
93-96
1821913C1
NAVISTAR
8.7
530
530
L6
97-04
1821914C1
NAVISTAR
7.6
DT466E
466
L6
97-99
182240
CUMMINS
12.8
V8E-235
784
V8
182250
CUMMINS
9.6
No Model
588
V6
182250
CUMMINS
9.6
No Model
588
V6
182360
CUMMINS
7.7
PHASE 4&5
470
V8
1824-A3
REO
6.4
No Model
391
V8
1824-A3
REO
7.2
No Model
443
V8
1826123
CHRYSLER
4.5
No Model
273
V8
62-69
1826123
CHRYSLER
5.0
FURY
303
V8
56-58
1826123
CHRYSLER
5.1
No Model
313
V8
57-66
1826123
CHRYSLER
5.3
No Model
326
V8
55-57
1826123
CHRYSLER
5.6
No Model
340
V8
68-73
1826129
CHRYSLER
4.5
No Model
273
V8
62-69
1826129
CHRYSLER
5.0
FURY
303
V8
56-58
1826129
CHRYSLER
5.1
No Model
313
V8
57-66
1826129
CHRYSLER
5.3
No Model
326
V8
55-57
1826129
CHRYSLER
5.6
No Model
340
V8
68-73
18266129
CHRYSLER
5.6
No Model
340
V8
68-73
182752R2
NAVISTAR
3.9
544
239
L4
2
2
F
2
2
HJR
273
273
D239
520

Casting
Manufacturer
Liter
Model
VIN
182752R2
NAVISTAR
4.0
784
D-246
246
L4
184873
GM
4.1
ELDORADO
252
V8
87
184873
GM
4.1
No Model
252
V8
82-86
184873
GM
4.5
No Model
272
V8
90
184873
GM
4.5
No Model
272
V8
88-89
185111
OLIVER
3.2
No Model
194
L6
48-67
185111
OLIVER
3.5
770
216
L6
55-67
185111
OLIVER
3.5
77KD
216
L6
55-67
185111
WAUKESHA
3.2
No Model
194
L6
185111
WAUKESHA
3.5
185GL
216
L6
1851127
CHRYSLER
6.8
No Model
413
V8
59-76
1851127
CHRYSLER
6.8
No Model
413
V8
59-77
1851436
CHRYSLER
6.8
No Model
413
V8
59-76
1851436
CHRYSLER
6.8
No Model
413
V8
59-77
1851436
CHRYSLER
7.0
HEMI
426
V8
66-71
1851436
CHRYSLER
7.2
No Model
440
V8
76-76
1851436
CHRYSLER
7.2
No Model
440
V8
66-73
1851436
CHRYSLER
7.2
No Model
440
V8
74-76
1851527
CHRYSLER
5.9
No Model
361
V8
80-81
1851527
CHRYSLER
5.9
No Model
361
V8
57-78
1851527
CHRYSLER
6.3
No Model
383
V8
59-71
1851527
CHRYSLER
6.6
No Model
400
V8
75-76
1851527
CHRYSLER
6.6
No Model
400
V8
72-78
1851527
CHRYSLER
6.6
No Model
400
V8
74-78
1851527
CHRYSLER
6.8
No Model
413
V8
59-77
1851527
CHRYSLER
7.0
HEMI
426
V8
66-71
1851527
CHRYSLER
7.2
No Model
440
V8
76-76
1851527
CHRYSLER
7.2
No Model
440
V8
66-73
1855127
CHRYSLER
6.8
No Model
413
V8
59-77
1855127
CHRYSLER
7.0
HEMI
426
V8
66-71
1855127
CHRYSLER
7.2
No Model
440
V8
76-76
1855127
CHRYSLER
7.2
No Model
440
V8
66-73
1855127
CHRYSLER
7.2
No Model
440
V8
74-76
1855527
CHRYSLER
6.3
No Model
383
V8
59-71
1861527
CHRYSLER
7.2
No Model
440
V8
74-76
186211
OLIVER
3.2
No Model
194
L6
48-67
186211
OLIVER
3.5
77KD
216
L6
55-67
186211
WAUKESHA
3.2
185DAC
194
L6
186211A
OLIVER
3.2
No Model
194
L6
48-67
186211A
OLIVER
3.5
770
216
L6
55-67
186211A
OLIVER
3.5
77KD
216
L6
55-67
186311
OLIVER
3.5
770
216
L6
55-67
186311
OLIVER
3.5
77KD
216
L6
55-67
186311
WAUKESHA
3.5
185GL
216
L6
186433
STUDEBAKER
3.0
No Model
185
L6
187011
WAUKESHA
3.2
185GB
194
L6
187111
MILITARY STD
3.0
No Model
186
L6
187111
MILITARY STD
3.4
No Model
209
L6
187111
WAUKESHA
3.4
185GM
209
L6
187873
GM
4.1
No Model
252
V8
87-88
1881992
CHRYSLER
1.7
No Model
105
L4
66-70
188A
GM
7.4
No Model
454
V8
87-90
188A
GM
7.4
No Model
454
V8
91-97
188A
GM
7.4
No Model
454
V8
87-90
189986
STUDEBAKER
2.8
No Model
170
L6
55-60
189986
STUDEBAKER
2.8
No Model
170
L6
55-60
18R
TOYOTA
2.0
CELICA
18R-C
120
L4
71-74
18RC
TOYOTA
2.0
CELICA
18R-C
120
L4
71-74
190107
WAUKESHA
4.3
190GL
265
L6
HJR
TRK
HJR
T
HJR
G
G
521
CID Cyl
Year
55-58

Casting
Manufacturer
Liter
CID Cyl
Year
190111
OLIVER
4.3
1650
190111
OLIVER
5.0
No Model
265
L6
47-67
302
L6
190111
WAUKESHA
4.3
47-62
190GL
265
L6
190111
WAUKESHA
190211
OLIVER
5.0
195GL
302
L6
4.3
1650
265
190211
L6
47-67
OLIVER
5.0
No Model
302
L6
47-62
190211
WAUKESHA
4.3
190GLC
265
L6
190211
WAUKESHA
5.0
195GLC
302
L6
190620
CUMMINS
19111
WAUKESHA
19111-B
WAUKESHA
19125E
28.0
Model
V1710
VIN
V12
1710
V 12
3.0
No Model
185
L6
3.0
XAH
186
L4
HERCULES
4.0
WXA
242
L6
19125E
HERCULES
4.9
WXB
298
L6
19125E
HERCULES
5.6
WXC
339
L6
19125E
HERCULES
5.9
WXC-2
361
L6
19125E
HERCULES
5.9
WXLC
358
L6
19125E
HERCULES
6.3
No Model
383
L6
19125E
HERCULES
6.3
WXC-3
383
L6
19125E
HERCULES
6.6
WXLC-3
404
L6
19125E
HERCULES
6.6
WXLD
404
L6
19125E
HERCULES
6.6
WXLD-ER
404
L6
19128E
HERCULES
4.0
WXA
242
L6
19128E
HERCULES
4.9
WXB
298
L6
19128E
HERCULES
5.6
WXC
339
L6
19128E
HERCULES
5.9
No Model
361
L6
19128E
HERCULES
5.9
WXC-2
361
L6
19128E
HERCULES
5.9
WXLC
358
L6
19128E
HERCULES
6.3
No Model
383
L6
19128E
HERCULES
6.3
WXC-3
383
L6
19128E
HERCULES
6.6
WXLC-3
404
L6
19128E
HERCULES
6.6
WXLD
404
L6
19128E
HERCULES
6.6
WXLD-ER
404
L6
191311
OLIVER
3.8
1550
232
L6
191311
OLIVER
4.3
1650
265
L6
191311
WAUKESHA
4.3
190DLC
265
L6
191311
WAUKESHA
4.3
190GLB
265
L6
191311
WAUKESHA
5.0
195DLC
302
L6
191311
WAUKESHA
5.0
195GL
302
L6
191311
WAUKESHA
5.2
195GK
320
L6
191311
WAUKESHA
5.2
195GK
320
L6
191311
WAUKESHA
5.2
195GKA
320
L6
19136
HERCULES
4.0
WXA
242
L6
19136
HERCULES
4.3
JXB
263
L6
19136
HERCULES
4.9
WXB
298
L6
19136
HERCULES
5.6
WXC
339
L6
19136
HERCULES
5.9
No Model
361
L6
19136
HERCULES
5.9
WXC-2
361
L6
19136
HERCULES
5.9
WXLC
358
L6
19136
HERCULES
6.3
No Model
383
L6
19136
HERCULES
6.3
WXC-3
383
L6
19136
HERCULES
6.6
WXLC-3
404
L6
19136
HERCULES
6.6
WXLD
404
L6
19136
HERCULES
6.6
WXLD-ER
404
L6
19138E
HERCULES
4.0
WXA
242
L6
19138E
HERCULES
4.3
JXB
263
L6
19138E
HERCULES
4.9
WXB
298
L6
19138E
HERCULES
5.6
WXC
339
L6
19138E
HERCULES
5.9
No Model
361
L6
19138E
HERCULES
5.9
WXC-2
361
L6
522
47-67

Casting
Manufacturer
Liter
Model
VIN
19138E
HERCULES
5.9
WXLC
358
L6
19138E
HERCULES
6.3
No Model
383
L6
19138E
HERCULES
6.3
WXC-3
383
L6
19138E
HERCULES
6.6
WXLC-3
404
L6
19138E
HERCULES
6.6
WXLD
404
L6
19138E
HERCULES
6.6
WXLD-ER
404
L6
192
VOLVO
2.3
B23
141
L4
192211
WAUKESHA
4.3
190DLC
265
L6
192211
WAUKESHA
5.0
195DLC
302
L6
192211
WAUKESHA
5.2
195GKA
320
L6
192211B
WAUKESHA
4.3
VRD
265
L6
192211B
WAUKESHA
5.0
195DLC
302
L6
192211B
WAUKESHA
5.0
195GL
302
L6
192211B
WAUKESHA
5.0
195GLC
302
L6
192211B
WAUKESHA
5.2
195GK
320
L6
192211B
WAUKESHA
5.2
195GKA
320
L6
193011
WAUKESHA
5.0
197DLC
302
L6
1932610
CHRYSLER
4.0
No Model
241
L6
32-41
1932610
CHRYSLER
4.3
No Model
265
L6
52-68
1932610
CHRYSLER
4.4
BELVEDERE
270
V8
55-56
195111
OLIVER
5.0
No Model
302
L6
47-62
195111
OLIVER
5.3
No Model
322
L6
47-62
195311
OLIVER
3.8
1550
232
L6
195311
OLIVER
4.3
1650
265
L6
47-67
195311
OLIVER
5.0
No Model
302
L6
47-62
195311
OLIVER
5.3
No Model
322
L6
47-62
195311
WAUKESHA
4.3
190DLC
265
L6
195311
WAUKESHA
4.3
190GLB
265
L6
195311
WAUKESHA
4.3
VRD
265
L6
195311
WAUKESHA
5.0
195DLC
302
L6
195311
WAUKESHA
5.0
195GL
302
L6
195311
WAUKESHA
5.0
195GLC
302
L6
195311
WAUKESHA
5.2
195GK
320
L6
195311
WAUKESHA
5.2
195GKA
320
L6
195311B
WAUKESHA
4.3
VRD
265
L6
195311B
WAUKESHA
5.0
195DLC
302
L6
195311B
WAUKESHA
5.0
195GL
302
L6
195311B
WAUKESHA
5.0
195GLC
302
L6
195311B
WAUKESHA
5.2
195GK
320
L6
195311B
WAUKESHA
5.2
195GKA
320
L6
19584B
HERCULES
4.0
WXA
242
L6
19584B
HERCULES
4.3
JXB
263
L6
19584B
HERCULES
4.9
WXB
298
L6
19584B
HERCULES
5.6
WXC
339
L6
19584B
HERCULES
5.9
No Model
361
L6
19584B
HERCULES
5.9
WXC-2
361
L6
19584B
HERCULES
5.9
WXLC
358
L6
19584B
HERCULES
6.3
No Model
383
L6
19584B
HERCULES
6.3
WXC-3
383
L6
19584B
HERCULES
6.6
WXLC-3
404
L6
19584B
HERCULES
6.6
WXLD
404
L6
19584B
HERCULES
6.6
WXLD-ER
404
L6
19585B
HERCULES
4.0
WXA
242
L6
19585B
HERCULES
4.3
JXB
263
L6
19585B
HERCULES
4.9
WXB
298
L6
19585B
HERCULES
5.6
WXC
339
L6
19585B
HERCULES
5.9
No Model
361
L6
19585B
HERCULES
5.9
WXC-2
361
L6
19585B
HERCULES
5.9
WXLC
358
L6
(1)
523
CID Cyl
Year
82-84
62-64
62-64
62-64

Casting
Manufacturer
Liter
Model
19585B
HERCULES
6.3
No Model
383
L6
19585B
HERCULES
6.3
WXC-3
383
L6
19585B
HERCULES
6.6
WXLC-3
404
L6
19585B
HERCULES
6.6
WXLD
404
L6
19585B
HERCULES
6.6
WXLD-ER
404
L6
19585E
HERCULES
4.0
WXA
242
L6
19585E
HERCULES
4.3
JXB
263
L6
19585E
HERCULES
4.9
WXB
298
L6
19585E
HERCULES
5.6
WXC
339
L6
19585E
HERCULES
5.9
No Model
361
L6
19585E
HERCULES
5.9
WXC-2
361
L6
19585E
HERCULES
5.9
WXLC
358
L6
19585E
HERCULES
6.3
No Model
383
L6
19585E
HERCULES
6.3
WXC-3
383
L6
19585E
HERCULES
6.6
WXLC-3
404
L6
19585E
HERCULES
6.6
WXLD
404
L6
19585E
HERCULES
6.6
WXLD-ER
404
L6
1978698
CHRYSLER
6.8
No Model
413
V8
59-77
1978698
CHRYSLER
7.0
HEMI
426
V8
66-71
1978698
CHRYSLER
7.2
No Model
440
V8
76-76
1978698
CHRYSLER
7.2
No Model
440
V8
66-73
1978698
CHRYSLER
7.2
No Model
440
V8
74-76
199045H
HILLMAN
1.6
ALPINE
97
L4
61-65
199966
STUDEBAKER
2.7
No Model
170
L6
43-54
199966
STUDEBAKER
2.8
No Model
170
L6
55-60
199966
STUDEBAKER
2.8
No Model
170
L6
55-60
19N
CHRYSLER
3.0
No Model
181
V6
87-95
19N
CHRYSLER
3.0
No Model
181
V6
96-99
19N
CHRYSLER
3.0
No Model
181
V6
91-92
19N
CHRYSLER
3.0
No Model
181
V6
91-92
19N
CHRYSLER
3.0
No Model
181
V6
90-92
19N
CHRYSLER
3.0
No Model
181
V6
91-92
19N
CHRYSLER
3.0
No Model
181
V6
92
19N
CHRYSLER
3.0
STEALTH
181
V6
93-95
19N
HYUNDAI
3.0
SONATA
183
V6
89-98
19N
MITSUBISHI
3.0
DIMANTE
181
V6
93-96
19N
MITSUBISHI
3.0
GALANT
181
V6
88-92
19N
MITSUBISHI
3.0
MONTERO
181
V6
95-03
19N
MITSUBISHI
3.0
No Model
181
V6
87-91
1A
TOYOTA
1.5
TERCEL
1A-C
89
L4
80-80
1A
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
1AA
CHRYSLER
2.2
SHELBY
135
L4
86-90
1B
TOYOTA
1.9
CROWN
113
L4
66-69
1BA
FORD
3.9
No Model
239
V8
46-53
1BA-6303-A
FORD
3.9
No Model
239
V8
46-53
1BA-6303-B
FORD
3.9
No Model
239
V8
46-53
1D
FORD
2.0
RANGER
122
L4
83-88
1D
FORD
2.0
RANGER
122
L4
84-85
1D
FORD
2.3
LSG423
140
L4
1D
FORD
2.3
No Model
140
L4
81-82
1D
FORD
2.3
No Model
140
L4
80-84
1D
FORD
2.3
No Model
140
L4
85-88
1D
FORD
2.3
No Model
140
L4
76-80
1D
FORD
2.3
No Model
140
L4
91-93
1D
FORD
2.3
No Model
140
L4
80-87
1D
FORD
2.3
No Model
140
L4
79-80
1D
FORD
2.3
No Model
140
L4
83-88
1D
FORD
2.3
No Model
140
L4
74-75
1D
FORD
2.3
No Model
140
L4
74-75
524
VIN
HJR
CID Cyl
Year

Casting
Manufacturer
Liter
Model
1D
FORD
2.3
No Model
1D
FORD
7.5
LSG875
1D
FORD
7.5
No Model
1D
FORD
7.5
No Model
1D
FORD
7.5
1F
FORD
1F2E
VIN
CID Cyl
Year
140
L4
76-79
460
V8
460
V8
87-98
460
V8
79-87
No Model
SVO
460
V8
87-97
2.8
FALCON
170
L6
61-72
FORD
3.8
WINDSTAR
232
V6
96-04
1G
FORD
3.3
No Model
200
L6
80-82
1G
FORD
3.3
No Model
200
L6
63-79
1G5B
TRIUMPH
2.0
No Model
CL
122
L4
75-81
1G5B
TRIUMPH
2.0
No Model
CV
122
L4
75-81
1H
FORD
3.3
No Model
200
L6
80-82
1H
FORD
3.3
No Model
200
L6
63-79
1H
FORD
3.3
No Model
200
L6
83
1H625R2
NAVISTAR
3.9
544
D239
239
L4
1HA
FORD
3.3
No Model
200
L6
80-82
1HA
FORD
3.3
No Model
200
L6
63-79
1HA
FORD
3.7
No Model
226
L6
47-52
1HA6303
FORD
4.2
2701C
254
L4
68-72
1HA-6303
FORD
3.7
No Model
226
L6
47-52
1J
FORD
4.2
No Model
255
V8
80-82
1JA
FORD
4.2
No Model
255
V8
80-82
1K
FORD
5.8
No Model
G,Q
351
V8
75-82
1K
GM
1.6
NOVA
97
L4
85-88
1K
GM
1.6
PRIZM
97
L4
89-90
1K
GM
1.6
PRIZM
97
L4
89-94
1K
TOYOTA
1.5
TERCEL
1A-C
89
L4
80-80
1K
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
1K
TOYOTA
1.6
COROLLA
4A-C
97
L4
83-87
1KA
FORD
5.8
No Model
G,Q
351
V8
75-82
1L
FORD
3.9
No Model
240
L6
65-74
1LA
FORD
3.9
No Model
240
L6
65-74
1LAB
FORD
3.9
No Model
240
L6
65-74
1M
FORD
3.6
MERCURY COMET
221
V8
62-63
1M
FORD
4.3
MERCURY METEOR
260
V8
63-64
1M
FORD
4.7
FALCON
289
V8
64-68
1M2799
CATERPILLAR
24.1
353
1473
L6
1M2799
CATERPILLAR
24.1
353
1473
L6
1M2799
CATERPILLAR
24.1
D9
1473
L6
1MA
FORD
3.6
MERCURY COMET
221
V8
62-63
1MA
FORD
4.3
MERCURY METEOR
260
V8
63-64
1MA
FORD
4.7
FALCON
289
V8
64-68
1N
FORD
4.9
CSG-649
300
L6
65-93
1N
FORD
4.9
No Model
300
L6
76-85
1N
FORD
4.9
No Model
300
L6
82-84
1N
FORD
4.9
No Model
300
L6
85-86
1N
FORD
4.9
No Model
300
L6
73-79
1N
FORD
4.9
No Model
300
L6
78
1N
FORD
4.9
No Model
300
L6
78-79
1N
FORD
4.9
No Model
300
L6
83-84
1N
FORD
4.9
No Model
300
L6
85-86
1N
FORD
4.9
No Model
300
L6
87-96
1NA
FORD
4.9
CSG-649
300
L6
65-93
1NA
FORD
4.9
No Model
300
L6
76-85
1NA
FORD
4.9
No Model
300
L6
82-84
1NA
FORD
4.9
No Model
300
L6
85-86
1NA
FORD
4.9
No Model
300
L6
73-79
1NA
FORD
4.9
No Model
300
L6
78
1NA
FORD
4.9
No Model
300
L6
78-79
K
C/B
525
V
K

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
1NA
FORD
4.9
No Model
1NA
FORD
4.9
No Model
300
L6
83-84
300
L6
1NA
FORD
4.9
No Model
85-86
300
L6
1NAB
FORD
4.9
87-96
CSG-649
300
L6
1NAB
FORD
65-93
4.9
No Model
300
L6
1NAB
76-85
FORD
4.9
No Model
300
L6
82-84
1NAB
FORD
4.9
No Model
300
L6
85-86
1NAB
FORD
4.9
No Model
300
L6
73-79
1NAB
FORD
4.9
No Model
300
L6
78
1NAB
FORD
4.9
No Model
300
L6
78-79
1NAB
FORD
4.9
No Model
300
L6
83-84
1NAB
FORD
4.9
No Model
300
L6
85-86
1NAB
FORD
4.9
No Model
300
L6
87-96
1NABC
FORD
4.9
CSG-649
300
L6
65-93
1NABC
FORD
4.9
No Model
300
L6
76-85
1NABC
FORD
4.9
No Model
300
L6
82-84
1NABC
FORD
4.9
No Model
300
L6
85-86
1NABC
FORD
4.9
No Model
300
L6
73-79
1NABC
FORD
4.9
No Model
300
L6
78
1NABC
FORD
4.9
No Model
300
L6
78-79
1NABC
FORD
4.9
No Model
300
L6
83-84
1NABC
FORD
4.9
No Model
300
L6
85-86
1NABC
FORD
4.9
No Model
300
L6
87-96
1P
FORD
3.8
No Model
232
V6
82-87
1P
FORD
3.8
No Model
232
V6
84-85
1P1390
CATERPILLAR
8.6
1673
CB
525
L6
1P1390
CATERPILLAR
8.6
D333
CB
525
L6
1P1390
CATERPILLAR
10.5
1673C
CB
638
L6
1P1390
CATERPILLAR
10.5
1673C
SP
638
L6
1P1390
CATERPILLAR
10.5
3306
CB
638
L6
1P1390
CATERPILLAR
10.5
3306
DI
638
L6
1P1390
CATERPILLAR
10.5
3306
SP
638
L6
1P1390
CATERPILLAR
10.5
3306
SP
638
L6
1P1390
CATERPILLAR
10.5
D333C
CB
638
L6
1P1390
CATERPILLAR
10.5
D333C
SP
638
L6
1P9501
CATERPILLAR
24.1
353
1473
L6
1P9501
CATERPILLAR
24.1
353
1473
L6
1S2512
CATERPILLAR
9.8
340
597
L4
1S2512
CATERPILLAR
19.5
D346
1191
V8
1S5420
CATERPILLAR
11.5
1676
700
V8
1S5420
CATERPILLAR
11.5
D336
700
V8
1S5420
CATERPILLAR
13.6
D339
831
L4
1S5420
CATERPILLAR
13.6
D339
831
L4
1S5420
CATERPILLAR
13.6
D7
831
L4
1S9400
CATERPILLAR
8.6
1673
CB
525
L6
1S9400
CATERPILLAR
8.6
D333
CB
525
L6
1U
FORD
6.7
No Model
410
V8
66-67
1U
FORD
7.0
FE
428
V8
66-70
1UA
FORD
6.7
No Model
410
V8
66-67
1UA
FORD
7.0
FE
428
V8
66-70
1UB
FORD
6.7
No Model
410
V8
66-67
1UB
FORD
7.0
FE
428
V8
66-70
1UVA
FORD
6.7
No Model
410
V8
66-67
1V
FORD
6.1
No Model
370
V8
79-94
1V
FORD
6.1
No Model
370
V8
79-93
1VA
FORD
6.1
No Model
370
V8
79-94
1VA
FORD
6.1
No Model
370
V8
79-93
1VA
FORD
6.7
No Model
410
V8
66-67
1VAB
FORD
6.1
No Model
370
V8
79-94
C/B
526

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
1VAB
FORD
6.1
No Model
1W0400
CATERPILLAR
5.2
3204
DI
370
V8
79-93
318
L4
1W0400
CATERPILLAR
5.2
3204
1W0400
CATERPILLAR
5.2
3204
DI(2)
318
L4
PC
318
1W5000
CATERPILLAR
51.8
3512
3158
L4
V 12
1W5008
CATERPILLAR
18.0
3408
1099
V8
1W5008
CATERPILLAR
18.0
D8L
1099
V8
1W6206
CATERPILLAR
14.6
3406
893
L6
1W6206
CATERPILLAR
14.6
3406
893
L6
1W6206
CATERPILLAR
14.6
3406
SP
893
L6
1W6208
CATERPILLAR
18.0
3408
1099
V8
1W6208
CATERPILLAR
18.0
D8L
1099
V8
1W6209
CATERPILLAR
18.0
3408
1099
V8
1W6209
CATERPILLAR
18.0
D8L
1099
V8
1W6212
CATERPILLAR
27.0
3412
1649
V 12
1W6408
CATERPILLAR
34.5
3508
2105
V8
1W7420
CATERPILLAR
10.4
1160
636
V8
1W7420
CATERPILLAR
10.4
3160
636
V8
1W7575
CATERPILLAR
29.3
D348
1786
V 12
1Y
FORD
462
V8
66-68
1Z
66-69
7.6
No Model
TOYOTA
1.9
CROWN
113
L4
ALLIS CHALMERS
3.7
D17
226
L4
54-57
FORD
4.2
No Model
255
V8
80-82
2 MAE
FORD
5.0
No Model
302
V8
85-97
200111A
WAUKESHA
94.9
VLRD
5788
V 12
200111H
WAUKESHA
94.9
VLRD
5788
V 12
200311
WAUKESHA
94.9
L5790
5788
V 12
200311
WAUKESHA
115.4
L7042
7041
V 12
2006157
CHRYSLER
6.8
No Model
413
V8
59-77
2006157
CHRYSLER
7.0
HEMI
HJR
426
V8
66-71
2006157
CHRYSLER
7.2
No Model
440
V8
66-73
2006157
CHRYSLER
7.2
No Model
440
V8
74-76
2010132
NISSAN
1.3
No Model
A13
79
L4
74
202B
GM
1.8
LUV
110
L4
76-86
202B
GM
1.8
LUV
110
L4
72-75
202B
GM
1.9
LUV
119
L4
82-85
203011B
WAUKESHA
83.6
L-5100-G
204640
CUMMINS
28.0
V1710
204640
CUMMINS
28.0
VT1710
205011B
WAUKESHA
47.4
205011B
WAUKESHA
205011B
WAUKESHA
205215
CROSLEY
205230
5100
V 12
V12
1710
V 12
VTA
1710
V 12
VHP
EARLY
2894
L6
47.4
VHP
LATE
2894
L6
47.4
VHP DIESEL
EARLY
2894
L6
44
L4
46-55
46-55
0.7
No Model
CROSLEY
0.7
No Model
44
L4
20532E
HERCULES
5.9
WXLC
358
L6
20536E
HERCULES
5.9
WXLC
358
L6
20541
HERCULES
5.9
WXLC
358
L6
20542
HERCULES
5.9
WXLC
358
L6
20632
HERCULES
5.9
WXLC
358
L6
206638
ALLIS CHALMERS
1.0
60
60
L4
206638
ALLIS CHALMERS
1.9
116
L4
206638
ALLIS CHALMERS
2.0
B&C
120
L4
206638
ALLIS CHALMERS
2.1
B&C
125
L4
206638
ALLIS CHALMERS
2.1
RC
RC
125
L4
206910
CUMMINS
18.8
K SERIES
1150
L6
206910
CUMMINS
18.8
K SERIES
1150
L6
206910
CUMMINS
18.8
KTA
KTA
1150
L6
207145
ALLIS CHALMERS
1.0
60
60
L4
207145
ALLIS CHALMERS
1.9
116
L4
527

Casting
Manufacturer
Liter
207145
ALLIS CHALMERS
2.0
B&C
120
L4
207145
ALLIS CHALMERS
2.1
B&C
125
L4
207145
ALLIS CHALMERS
2.1
RC
RC
125
L4
208600
CUMMINS
903
V8
209
GM
4.2
TRAILBLAZER
256
L6
02-05
2090911
GM
4.4
No Model
270
L6
45-62
2090911
GM
5.0
No Model
GMC
302
L6
50-57
20R9T
AUDI
2.8
QUATTRO
AHA
169
V6
98-01
20T
FORD
2.0
TC40
122
L4
93-04
210008832
GM
1.9
SATURN
116
L4
93-02
210008832
GM
1.9
SATURN
116
L4
90-94
21000883-3
GM
1.9
SATURN
116
L4
90-02
21008832
GM
1.9
SATURN
116
L4
90-02
211990
CUMMINS
927
L6
2121654
CHRYSLER
2.8
BARRACUDA
170
L6
60-71
2128278
CHRYSLER
4.5
No Model
273
273
V8
62-69
2128278
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2128278
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2128278
CHRYSLER
5.2
No Model
318
V8
83-89
2128278
CHRYSLER
5.2
No Model
318
V8
77-80
2128278
CHRYSLER
5.2
No Model
318
V8
69-76
2128278
CHRYSLER
5.2
No Model
318
V8
77-79
2128278
CHRYSLER
5.2
No Model
318
V8
78-80
2128278
CHRYSLER
5.2
No Model
318
V8
81-82
2128278
CHRYSLER
5.2
No Model
318
V8
81-82
2128278
CHRYSLER
5.2
No Model
318
V8
81-82
2128278
CHRYSLER
5.2
No Model
318
V8
81-82
2128278
CHRYSLER
5.2
No Model
318
V8
83-89
2128278
CHRYSLER
5.2
No Model
318
V8
83-84
2128278
CHRYSLER
5.6
No Model
340
V8
68-73
2128492
CHRYSLER
3.7
No Model
225
L6
76-87
2128492
CHRYSLER
3.7
No Model
225
L6
69-80
2128492
CHRYSLER
3.7
No Model
225
L6
60-80
2128869
CHRYSLER
4.5
No Model
273
273
V8
62-69
2128869
CHRYSLER
5.0
FURY
303
V8
56-58
2128869
CHRYSLER
5.1
No Model
313
V8
57-66
2128869
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2128869
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2128869
CHRYSLER
5.2
No Model
318
V8
83-89
2128869
CHRYSLER
5.2
No Model
318
V8
77-80
2128869
CHRYSLER
5.2
No Model
318
V8
69-76
2128869
CHRYSLER
5.2
No Model
318
V8
77-79
2128869
CHRYSLER
5.2
No Model
318
V8
80
2128869
CHRYSLER
5.2
No Model
318
V8
78-80
2128869
CHRYSLER
5.2
No Model
318
V8
81-82
2128869
CHRYSLER
5.2
No Model
318
V8
81-82
2128869
CHRYSLER
5.2
No Model
318
V8
81-82
2128869
CHRYSLER
5.2
No Model
318
V8
81-82
2128869
CHRYSLER
5.2
No Model
318
V8
81-82
2128869
CHRYSLER
5.2
No Model
318
V8
81-82
2128869
CHRYSLER
5.2
No Model
318
V8
83-89
2128869
CHRYSLER
5.2
No Model
318
V8
83-84
2128869
CHRYSLER
5.3
No Model
326
V8
55-57
2128869
CHRYSLER
5.6
No Model
340
V8
68-73
213352
ALLIS CHALMERS
1.0
60
60
L4
213352
ALLIS CHALMERS
1.9
116
L4
213352
ALLIS CHALMERS
2.0
B&C
120
L4
213352
ALLIS CHALMERS
2.1
B&C
125
L4
213352
ALLIS CHALMERS
2.1
RC
RC
125
L4
14.8
15.2
Model
VIN
V903
S
NT SERIES
528
CID Cyl
Year

Casting
Manufacturer
Liter
Model
213353
ALLIS CHALMERS
0.4
25
2135416
GM
4.4
No Model
2135416
GM
5.0
No Model
2136119
GM
4.4
No Model
2136119
GM
5.0
No Model
2139481
DEUTZ
0.0
BF L913 TURBO
2139481
DEUTZ
4.1
2139481
DEUTZ
6.1
2144958
GM
2144958
VIN
W
CID Cyl
Year
25
L4
270
L6
45-62
302
L6
50-57
270
L6
45-62
302
L6
50-57
L6
BF4L913C
249
L4
BF6L913/C
374
L6
3.7
No Model
224
L6
40-47
GM
4.0
No Model
248
L8
37-55
2144958
GM
4.1
No Model
256
L6
54-56
214940
CUMMINS
14.8
V903
903
V8
216011
ALLIS CHALMERS
3.6
D346
220
L4
216011
ALLIS CHALMERS
3.6
D346T
220
L4
216011
WAUKESHA
3.6
220
VR
220
L4
216011
WAUKESHA
3.6
220
VR(1)
220
L4
216011
WAUKESHA
3.6
VRD220
220
L4
2170
GM
3.8
No Model
231
V6
95-04
2170
GM
3.8
No Model
231
V6
95-01
217310
CUMMINS
28.0
V1710
V12
1710
V 12
217310
CUMMINS
28.0
VT1710
VTA
1710
V 12
218528R1
NAVISTAR
4.4
510B
268
L4
75-85
218528R2
NAVISTAR
4.4
510B
268
L4
75-85
218528R3
NAVISTAR
4.4
510B
268
L4
75-85
219
NISSAN
1.6
No Model
L16
97
L4
72
219
NISSAN
1.6
No Model
L16
97
L4
73
2191127
GM
3.7
No Model
224
L6
40-47
2191127
GM
3.7
TRUCK
228
L6
39-51
2191127
GM
4.0
No Model
248
L8
37-55
2191127
GM
4.1
No Model
256
L6
54-56
2191644
GM
5.9
No Model
361
V6
38-49
2192941
GM
4.4
No Model
270
L6
45-62
2192941
GM
5.0
No Model
302
L6
50-57
2194012
GM
4.4
No Model
270
L6
45-62
2194012
GM
5.0
No Model
302
L6
50-57
2194570
GM
3.7
No Model
224
L6
40-47
2194570
GM
3.7
TRUCK
228
L6
39-51
2194570
GM
4.0
No Model
248
L8
37-55
2194570
GM
4.1
No Model
256
L6
54-56
2194840
CUMMINS
7.7
PHASE 4&5
470
V8
2194958
GM
5.0
No Model
302
L6
22011
WAUKESHA
0.0
XBKH
L4
2202250
HERCULES
0.9
NXA
57
L2
2202250
HERCULES
1.8
IXA, IXB3
113
L4
2202250
HERCULES
2.2
IXA, IXB3
133
L4
2202250
HERCULES
2.2
IXA, IXB3
133
L4
220229C
HERCULES
1.8
IXA, IXB3
113
L4
220229C
HERCULES
2.2
IXA, IXB3
133
L4
220229C
HERCULES
2.2
IXA, IXB3
133
L4
220229C
MILITARY STD
2.2
No Model
133
L4
2203155
CHRYSLER
5.9
No Model
361
V8
80-81
2203155
CHRYSLER
5.9
No Model
TRK
361
V8
57-78
2203155
CHRYSLER
6.6
No Model
400
V8
75-76
2203155
CHRYSLER
6.6
No Model
400
V8
72-78
2203155
CHRYSLER
6.6
No Model
400
V8
74-78
220426C
HERCULES
5.6
No Model
339
L6
220426-C
MILITARY STD
5.6
No Model
339
L6
220511A
WAUKESHA
2.9
D176G
176
L4
2205554
CHRYSLER
3.7
No Model
225
L6
529
GMC
GMC
GMC
GMC
GMC
50-57
76-87

Casting
Manufacturer
Liter
Model
2205700
CHRYSLER
4.5
No Model
2205700
CHRYSLER
5.0
FURY
2205700
CHRYSLER
5.1
2205700
CHRYSLER
2205700
CID Cyl
Year
273
V8
62-69
303
V8
56-58
No Model
313
V8
57-66
5.3
No Model
326
V8
55-57
CHRYSLER
5.6
No Model
340
V8
68-73
2205702
CHRYSLER
4.5
No Model
273
V8
62-69
2205702
CHRYSLER
5.0
FURY
303
V8
56-58
2205702
CHRYSLER
5.1
No Model
313
V8
57-66
2205702
CHRYSLER
5.3
No Model
326
V8
55-57
2205702
CHRYSLER
5.6
No Model
340
V8
68-73
2206157
CHRYSLER
5.9
No Model
361
V8
80-81
2206157
CHRYSLER
5.9
No Model
361
V8
57-78
2206157
CHRYSLER
6.3
No Model
383
V8
59-71
2206157
CHRYSLER
6.8
No Model
413
V8
59-77
2206157
CHRYSLER
7.0
HEMI
HJR
426
V8
66-71
2206157
CHRYSLER
7.2
No Model
440
V8
66-73
2206157
CHRYSLER
7.2
No Model
440
V8
74-76
2206158
CHRYSLER
6.8
No Model
413
V8
59-76
2206158
CHRYSLER
6.8
No Model
413
V8
59-77
2206158
CHRYSLER
7.0
HEMI
HJR
426
V8
66-71
2206158
CHRYSLER
7.0
HEMI
IND
426
V8
71-77
2206158
CHRYSLER
7.2
No Model
440
V8
76-76
2206158
CHRYSLER
7.2
No Model
440
V8
66-73
2206158
CHRYSLER
7.2
No Model
440
V8
74-76
2206159
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2206159
CHRYSLER
5.2
No Model
318
V8
73-76
2206159
CHRYSLER
5.2
No Model
318
V8
77-80
2206159
CHRYSLER
5.2
No Model
318
V8
69-76
2206159
CHRYSLER
5.2
No Model
318
V8
77-79
2206159
CHRYSLER
5.2
No Model
318
V8
80
2206159
CHRYSLER
5.2
No Model
318
V8
78-80
2206159
CHRYSLER
5.2
No Model
318
V8
81-82
2206159
CHRYSLER
5.2
No Model
318
V8
81-82
2206159
CHRYSLER
5.2
No Model
318
V8
81-82
2206159
CHRYSLER
5.2
No Model
318
V8
81-82
2206159
CHRYSLER
5.2
No Model
318
V8
81-85
2206159
CHRYSLER
5.2
No Model
318
V8
81-82
2206159
CHRYSLER
5.2
No Model
318
V8
83-91
2206159
CHRYSLER
5.2
No Model
318
V8
81-82
2206159
CHRYSLER
5.2
No Model
318
V8
83-87
2206159
CHRYSLER
5.2
No Model
318
V8
83-89
2206159
CHRYSLER
5.2
No Model
318
V8
83-87
2206159
CHRYSLER
5.2
No Model
318
V8
83-84
2206159
CHRYSLER
5.2
No Model
318
V8
62-67
2206159
CHRYSLER
5.9
No Model
361
V8
80-81
2206159
CHRYSLER
5.9
No Model
361
V8
57-78
2206159
CHRYSLER
6.3
No Model
383
V8
59-71
2206159
CHRYSLER
6.6
No Model
400
V8
75-76
2206159
CHRYSLER
6.6
No Model
400
V8
72-78
2206159
CHRYSLER
6.6
No Model
400
V8
74-78
2206160
CHRYSLER
5.9
No Model
361
V8
80-81
2206160
CHRYSLER
5.9
No Model
361
V8
57-78
2206160
CHRYSLER
6.3
No Model
383
V8
59-71
2206160
CHRYSLER
6.8
No Model
413
V8
59-76
2206160
CHRYSLER
6.8
No Model
413
V8
59-77
2206160
CHRYSLER
7.0
HEMI
426
V8
66-71
2206160
CHRYSLER
7.2
No Model
440
V8
76-76
2206160
CHRYSLER
7.2
No Model
440
V8
66-73
2206160
CHRYSLER
7.2
No Model
440
V8
74-76
530
VIN
273
273
TRK
TRK
TRK
HJR

Casting
Manufacturer
Liter
Model
220825E
MILITARY STD
3.9
No Model
237
L6
221211
OLIVER
4.6
1650
283
L6
221211
WAUKESHA
4.6
VRD283
283
L6
221211C
OLIVER
4.6
1650
283
L6
221211C
WAUKESHA
4.6
VRD283
283
L6
221411
OLIVER
5.1
VRD310
310
L6
221411
WAUKESHA
0.0
VRD
L6
221411
WAUKESHA
5.1
VRD310
310
L6
221411
WAUKESHA
5.1
VRG310
310
L6
22528
MG
1.1
No Model
70
L4
40-56
22528
MG
1.3
No Model
76
L4
40-54
22532120
GM
2.3
No Model
138
L4
88-95
22532120
GM
2.3
No Model
138
L4
88
22532120
GM
2.3
No Model
138
L4
89-94
22545690
GM
2.3
ACHIEVA
138
L4
92-95
22545690
GM
2.3
No Model
138
L4
88-95
22545690
GM
2.3
No Model
138
L4
88
22545690
GM
2.3
No Model
138
L4
89-94
2254590
GM
2.3
No Model
138
L4
88-95
2254690
GM
2.3
No Model
138
L4
89-94
22623
ALLIS CHALMERS
3.3
WD
WD
201
L4
2263611
CHRYSLER
2.8
BARRACUDA
170
L6
60-71
2264182
CHRYSLER
4.5
No Model
273
V8
62-69
2264182
CHRYSLER
5.0
FURY
303
V8
56-58
2264182
CHRYSLER
5.1
No Model
313
V8
57-66
2264182
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2264182
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2264182
CHRYSLER
5.2
No Model
318
V8
77-80
2264182
CHRYSLER
5.2
No Model
318
V8
69-76
2264182
CHRYSLER
5.2
No Model
318
V8
77-79
2264182
CHRYSLER
5.2
No Model
318
V8
78-80
2264182
CHRYSLER
5.2
No Model
318
V8
81-82
2264182
CHRYSLER
5.2
No Model
318
V8
81-82
2264182
CHRYSLER
5.2
No Model
318
V8
81-82
2264182
CHRYSLER
5.2
No Model
318
V8
81-82
2264182
CHRYSLER
5.2
No Model
318
V8
83-89
2264182
CHRYSLER
5.2
No Model
318
V8
83-84
2264182
CHRYSLER
5.3
No Model
326
V8
55-57
2264182
CHRYSLER
5.6
No Model
340
V8
68-73
2264478
CHRYSLER
2.8
BARRACUDA
170
L6
60-71
2264478
CHRYSLER
3.7
No Model
225
L6
76-87
2264479
CHRYSLER
3.7
No Model
225
L6
76-87
2264479
CHRYSLER
3.7
No Model
225
L6
69-80
2264479
CHRYSLER
3.7
No Model
225
L6
60-80
226526
ALLIS CHALMERS
0.4
25
25
L4
226526
ALLIS CHALMERS
3.3
HD4
200
L4
226526
ALLIS CHALMERS
3.3
WD
WD
201
L4
226526
ALLIS CHALMERS
3.7
D17
226
L4
226535
ALLIS CHALMERS
0.4
25
25
L4
226535
ALLIS CHALMERS
3.7
D17
226
L4
226535
ALLIS CHALMERS
3.7
WD45
226
L4
2268119
CHRYSLER
5.2
No Model
318
V8
83-89
2268613
CHRYSLER
3.7
No Model
225
L6
76-87
2268613
CHRYSLER
3.7
No Model
225
L6
69-80
2268613
CHRYSLER
3.7
No Model
225
L6
60-80
22704Z14
SAAB
2.0
No Model
B202
121
L4
86-94
227550
ALLIS CHALMERS
2.2
D10 & D12
139
L4
227550
ALLIS CHALMERS
2.4
D10 & D12
149
L4
227550
ALLIS CHALMERS
2.4
D14
149
L4
531
VIN
273
CID Cyl
Year
54-57
54-57

Casting
Manufacturer
Liter
Model
227550
ALLIS CHALMERS
2.4
D15
227550
ALLIS CHALMERS
2.6
G1600
229
GM
3.2
No Model
229
GM
3.8
229
GM
229
VIN
D15
CID Cyl
Year
149
L4
160
L4
196
V6
78-79
GRAND NATIONAL
231
V6
86-88
3.8
No Model
231
V6
78-81
GM
3.8
No Model
231
V6
83
229
GM
3.8
No Model
231
V6
84-85
229
GM
3.8
No Model
231
V6
78-81
229
GM
3.8
No Model
231
V6
82
229
GM
3.8
No Model
231
V6
83-87
229
GM
4.1
No Model
252
V6
80-81
229
GM
4.1
No Model
252
V6
82-84
229022
ALLIS CHALMERS
3.3
WC & WF
WC
201
L4
229022
ALLIS CHALMERS
3.7
170 & 175
226
L4
229022
ALLIS CHALMERS
3.7
D17
226
L4
22922Z9 JCSB
PERKINS
1.8
107
107
L4
22H1954A
AUSTIN
1.8
No Model
112
L4
73-75
22H1954A
AUSTIN
1.8
No Model
110
L4
64-80
22H1954A
MG
1.8
No Model
110
L4
65-72
22T
FORD
2.0
TC40
122
L4
93-04
23
DEUTZ
1.7
2FL-511
101
L2
230011
WAUKESHA
17.7
H1077
1077
V8
230011
WAUKESHA
17.7
H1077 DIESEL
1077
V8
23010
TOYOTA
1.5
3P
89
L4
230331
GM
6.6
No Model
RO
400
V8
68-69
230331
GM
7.5
No Model
455
V8
74-76
230331
GM
7.5
No Model
455
V8
74-76
230331
GM
7.5
No Model
455
V8
74-74
230331
GM
7.5
No Model
455
V8
74-74
230331
GM
7.5
No Model
455
V8
72-75
230376
GM
4.3
No Model
262
V8
75-76
230376
GM
5.0
No Model
307
V8
87-90
230376
GM
5.0
No Model
307
V8
81-88
230376
GM
5.7
No Model
350
V8
80
230376
GM
5.7
No Model
350
V8
78-79
230376
GM
5.7
No Model
350
V8
69-76
230376
GM
5.7
No Model
350
V8
77-80
230377
GM
3.7
No Model
224
L6
40-47
230377
GM
6.6
No Model
RO
400
V8
68-69
230377
GM
7.5
No Model
455
V8
74-76
230377
GM
7.5
No Model
455
V8
74-76
230377
GM
7.5
No Model
455
V8
74-74
230377
GM
7.5
No Model
455
V8
74-74
230377
GM
7.5
No Model
455
V8
72-75
230378
GM
3.7
No Model
224
L6
40-47
230378
GM
6.6
No Model
RO
400
V8
68-69
230378
GM
7.5
No Model
455
V8
74-76
230378
GM
7.5
No Model
455
V8
74-76
230378
GM
7.5
No Model
455
V8
74-74
230378
GM
7.5
No Model
455
V8
74-74
230378
GM
7.5
No Model
455
V8
72-75
23040
NISSAN
1.6
No Model
L16
97
L4
72
23040
NISSAN
1.6
No Model
L16
97
L4
73
2304987
GM
5.9
No Model
361
V6
38-49
230907
GM
6.6
No Model
RO
400
V8
68-69
230907
GM
7.5
No Model
455
V8
74-76
230907
GM
7.5
No Model
455
V8
74-76
230907
GM
7.5
No Model
455
V8
74-74
230907
GM
7.5
No Model
455
V8
74-74
532
54-57

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
230907
GM
7.5
No Model
230908
GM
6.6
No Model
RO
455
V8
72-75
400
V8
230908
GM
7.5
No Model
68-69
455
V8
230908
GM
7.5
74-76
No Model
455
V8
230908
GM
74-76
7.5
No Model
455
V8
230908
74-74
GM
7.5
No Model
455
V8
74-74
230908
GM
7.5
No Model
455
V8
72-75
233011
WAUKESHA
26.5
L1616
1616
V 12
233011
WAUKESHA
26.5
L1616 DIESEL
1616
V 12
2340
NISSAN
2340
NISSAN
234211A
WAUKESHA
35.3
P2154
2154
V 16
234211A
WAUKESHA
35.3
P2154 DIESEL
2154
V 16
2342204
GM
4.4
No Model
2342204
GM
5.0
No Model
2342204
GM
5.0
234224
GM
2342624
1.6
No Model
R16
98
L4
66-68
1.6
No Model
R16
98
L4
69-70
270
L6
45-62
305
V6
60-75
No Model
GMC
302
L6
50-57
5.0
No Model
305
V6
60-75
GM
5.0
No Model
GMC
302
L6
50-57
2342664
GM
5.0
No Model
305
V6
60-75
2344204
GM
5.0
No Model
GMC
302
L6
50-57
23500245
GM
6.2
No Model
379
V8
87-93
23500245
GM
6.2
No Model
379
V8
87-93
23500245
GM
6.5
No Model
397
V8
98-99
23500245
GM
6.5
No Model
397
V8
92-00
23500245
GM
6.5
No Model
397
V8
94-95
23500245
GM
6.5
No Model
397
V8
94-00
23500245
GM
6.5
No Model
397
V8
94-99
23502592
GM
6.2
No Model
379
V8
87-93
23502592
GM
6.2
No Model
379
V8
87-93
23502592
GM
6.5
No Model
397
V8
98-99
23502592
GM
6.5
No Model
397
V8
92-00
23502592
GM
6.5
No Model
397
V8
94-95
23502592
GM
6.5
No Model
397
V8
94-00
23502592
GM
6.5
No Model
397
V8
94-99
235032
HERCULES
2.3
IXLB
IXLB
141
L4
23527965
DDC
12.7
60 SERIES
775
L6
86-04
2362229
GM
4.4
No Model
270
L6
45-62
2362229
GM
5.0
No Model
GMC
302
L6
50-57
2364417
GM
5.0
No Model
305
V6
60-75
2366209
GM
5.8
No Model
351
V6
65-72
23909
JOHN DEERE
3.9
239T
239
L4
2402330
CHRYSLER
7.0
WEDGE
426
V8
65-66
2404929
GM
5.0
No Model
302
L6
50-57
241291
ALLIS CHALMERS
3.7
170 & 175
226
L4
2419583
GM
5.8
No Model
351
V6
65-72
2419583
GM
6.2
No Model
379
V6
73-76
2419583
GM
6.6
No Model
401
V6
73-77
2419583
GM
7.8
No Model
478
V6
65-77
2419583
GM
7.8
No Model
478
V6
65-77
242880R91
NAVISTAR
7.8
No Model
478
V8
56-78
242881R91
NAVISTAR
7.8
No Model
478
V8
56-78
242882R91
NAVISTAR
9.0
No Model
549
V8
60-78
24502170
GM
3.8
No Model
231
V6
95-01
24504
CASE
1.6
No Model
95
L4
24504
CASE
2.0
VA & VAE
124
L4
24504
WAUKESHA
2.2
180DLC
133
L4
2454001
GM
5.0
No Model
305
V6
60-75
2454017
GM
5.8
No Model
351
V6
65-72
2454017
GM
6.6
No Model
401
V6
73-77
533
GMC
C
M
M

Casting
Manufacturer
Liter
Model
CID Cyl
Year
2454017
GM
7.8
No Model
2454017
GM
7.8
No Model
478
V6
65-77
478
V6
2454191
GM
5.0
No Model
65-77
305
V6
2454192
GM
5.0
60-75
No Model
305
V6
24546590
GM
60-75
2.3
ACHIEVA
138
L4
24574115
92-95
GM
2.3
No Model
138
L4
94-95
2462387
CHRYSLER
5.1
No Model
313
V8
57-66
2463548
CHRYSLER
6.8
No Model
413
V8
59-77
2463548
CHRYSLER
7.0
HEMI
426
V8
66-71
2463548
CHRYSLER
7.0
WEDGE
426
V8
65-66
2463548
CHRYSLER
7.2
No Model
440
V8
76-76
2463548
CHRYSLER
7.2
No Model
440
V8
66-73
2463548
CHRYSLER
7.2
No Model
440
V8
74-76
2465747
CHRYSLER
5.2
No Model
318
V8
83-89
246747
CHRYSLER
5.2
DAKOTA
318
V8
88-91
246747
CHRYSLER
5.2
No Model
318
V8
73-76
246747
CHRYSLER
5.2
No Model
318
V8
77-80
246747
CHRYSLER
5.2
No Model
318
V8
69-76
246747
CHRYSLER
5.2
No Model
318
V8
77-79
246747
CHRYSLER
5.2
No Model
318
V8
80
246747
CHRYSLER
5.2
No Model
318
V8
78-80
246747
CHRYSLER
5.2
No Model
318
V8
81-82
246747
CHRYSLER
5.2
No Model
318
V8
81-82
246747
CHRYSLER
5.2
No Model
318
V8
81-82
246747
CHRYSLER
5.2
No Model
318
V8
81-82
246747
CHRYSLER
5.2
No Model
318
V8
81-85
246747
CHRYSLER
5.2
No Model
318
V8
81-82
246747
CHRYSLER
5.2
No Model
318
V8
83-91
246747
CHRYSLER
5.2
No Model
318
V8
81-82
246747
CHRYSLER
5.2
No Model
318
V8
83-87
246747
CHRYSLER
5.2
No Model
318
V8
83-89
246747
CHRYSLER
5.2
No Model
318
V8
83-87
246747
CHRYSLER
5.2
No Model
318
V8
83-84
246747
CHRYSLER
5.2
No Model
318
V8
62-67
2475493
GM
5.0
No Model
305
V6
60-75
2475494
GM
5.0
No Model
305
V6
60-75
2475793
GM
5.8
No Model
351
V6
65-72
2475795
GM
5.0
No Model
305
V6
60-75
2475795
GM
5.8
No Model
351
V6
65-72
2475796
GM
5.0
No Model
305
V6
60-75
2475796
GM
5.8
No Model
351
V6
65-72
2482923
CHRYSLER
5.9
No Model
361
V8
80-81
2482923
CHRYSLER
5.9
No Model
361
V8
57-78
24895D
NAVISTAR
7.5
TD-14
461
L4
24895DD
NAVISTAR
7.5
TD-14
461
L4
2491012
GM
5.0
No Model
GMC
302
L6
50-57
25052
CHRYSLER
3.9
NASH
A/J
235
L6
33-47
250699R1
NAVISTAR
17.9
TD24
1091
L6
251172R1
NAVISTAR
1.9
No Model
113
L4
251264R
NAVISTAR
1.0
U & UC
60
L4
251264R1
NAVISTAR
1.0
U & UC
60
L4
252576R2
NAVISTAR
8.2
No Model
DT
502
L6
49-69
2532457
CHRYSLER
4.5
No Model
273
273
V8
62-69
2532457
CHRYSLER
5.0
FURY
303
V8
56-58
2532457
CHRYSLER
5.1
No Model
313
V8
57-66
2532457
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2532457
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2532457
CHRYSLER
5.2
No Model
318
V8
77-80
2532457
CHRYSLER
5.2
No Model
318
V8
69-76
534
VIN
HJR
TRK
37-40

Casting
Manufacturer
Liter
Model
CID Cyl
Year
2532457
CHRYSLER
5.2
No Model
2532457
CHRYSLER
5.2
No Model
318
V8
77-79
318
V8
2532457
CHRYSLER
5.2
No Model
80
318
V8
78-80
2532457
CHRYSLER
5.2
2532457
CHRYSLER
5.2
No Model
318
V8
81-82
No Model
318
V8
2532457
CHRYSLER
81-82
5.2
No Model
318
V8
2532457
81-82
CHRYSLER
5.2
No Model
318
V8
81-82
2532457
CHRYSLER
5.2
No Model
318
V8
81-82
2532457
CHRYSLER
5.2
No Model
318
V8
81-82
2532457
CHRYSLER
5.2
No Model
318
V8
83-89
2532457
CHRYSLER
5.2
No Model
318
V8
83-84
2532457
CHRYSLER
5.3
No Model
326
V8
55-57
2532457
CHRYSLER
5.6
No Model
340
V8
68-73
2543935
CHRYSLER
3.7
No Model
225
L6
76-87
255
GM
4.3
No Model
262
V6
92-04
255029
HERCULES
2.7
JX4E-3
164
L4
255029
HERCULES
2.7
JX4E-5
164
L4
255029
HERCULES
3.1
JX4C-3
188
L4
255029
HERCULES
3.1
JX4C-5
188
L4
255029
HERCULES
3.1
No Model
191
L6
255029
HERCULES
3.1
No Model
191
L6
255029
HERCULES
3.3
JX4L-C3
199
L4
255029
HERCULES
3.3
JX4L-C5
199
L4
255029
HERCULES
3.3
JX4L-CER
199
L4
255029
HERCULES
3.5
JX4D-3
214
L4
255029
HERCULES
3.7
JX4L-D3
226
L4
255029
HERCULES
3.7
JX4L-D5
226
L4
255029
HERCULES
3.7
JX4L-DER
226
L4
255029
HERCULES
5.2
JX4D-5
320
L4
25505554
GM
3.8
No Model
231
V6
25505554
GM
3.8
No Model
231
V6
83
25505554
GM
3.8
No Model
231
V6
78-81
25505554
GM
3.8
No Model
231
V6
82
25511229
GM
3.2
No Model
196
V6
78-79
25511229
GM
3.8
GRAND NATIONAL
231
V6
86-88
25511229
GM
3.8
No Model
231
V6
78-81
25511229
GM
3.8
No Model
231
V6
83
25511229
GM
3.8
No Model
231
V6
84-85
25511229
GM
3.8
No Model
231
V6
78-81
25511229
GM
3.8
No Model
231
V6
82
25511229
GM
3.8
No Model
231
V6
83-87
25511229
GM
3.8
No Model
231
V6
88-91
25511229
GM
4.1
No Model
252
V6
80-81
25511229
GM
4.1
No Model
252
V6
82-84
2551383
OPEL
1.2
No Model
74
L4
61-62
2551383
OPEL
1.5
No Model
90
L4
59-62
2551383
OPEL
1.7
No Model
104
L4
62-65
2551388
OPEL
1.2
No Model
74
L4
61-62
2551388
OPEL
1.5
No Model
90
L4
59-62
2551388
OPEL
1.7
No Model
104
L4
62-65
25530502
GM
3.8
No Model
231
V6
88-91
25532694
GM
3.3
No Model
204
V6
89-93
25534737
GM
3.8
No Model
231
V6
92-94
25545690
GM
2.3
ACHIEVA
138
L4
92-95
25545690
GM
2.3
No Model
138
L4
88-95
25545690
GM
2.3
No Model
138
L4
89-94
2558393
CHRYSLER
4.5
No Model
273
273
V8
62-69
2558393
CHRYSLER
5.0
FURY
303
V8
56-58
2558393
CHRYSLER
5.1
No Model
313
V8
57-66
535
VIN
78-81

Casting
Manufacturer
Liter
CID Cyl
Year
2558393
CHRYSLER
5.3
No Model
2558393
CHRYSLER
5.6
No Model
326
V8
55-57
340
V8
256025E
HERCULES
2.8
68-73
No Model
173
L4
256025E
HERCULES
256025E
HERCULES
2.8
No Model
173
L4
3.3
DOOB
199
256025E
L4
HERCULES
3.7
DOOC
226
L4
256025E
HERCULES
4.2
DOOD
255
L4
256026E
HERCULES
2.8
No Model
173
L4
256026E
HERCULES
2.8
No Model
173
L4
256026E
HERCULES
3.3
DOOB
199
L4
256026E
HERCULES
3.7
DOOC
226
L4
256026E
HERCULES
4.2
DOOD
255
L4
256031
HERCULES
3.3
DOOB
199
L4
256031
HERCULES
3.7
DOOC
226
L4
256031
HERCULES
4.2
DOOD
255
L4
2566209
GM
5.0
No Model
305
V6
60-75
257
CHRYSLER
1.4
ENCORE
85
L4
83-84
257
CHRYSLER
1.4
No Model
85
L4
81-87
257
GM
3.0
No Model
181
V6
82-85
257011
WAUKESHA
9390
V 16
257264R1
NAVISTAR
1.0
U & UC
60
L4
258025
HERCULES
2.8
No Model
173
L4
258025
HERCULES
2.8
No Model
173
L4
258025
HERCULES
3.3
DOOB
199
L4
258025
HERCULES
3.7
DOOC
226
L4
258025
HERCULES
4.2
DOOD
255
L4
258412C
NAVISTAR
8.2
No Model
501
L6
49-69
258414C
NAVISTAR
8.2
No Model
501
L6
49-69
2593
MERCRUISER
3.7
MIE 470
224
L4
259719R1
NAVISTAR
17.9
TD24
1091
L6
259719R2
NAVISTAR
17.9
TD24
1091
L6
26
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
260068R1
NAVISTAR
8.2
No Model
DT
502
L6
49-69
260068R2
NAVISTAR
8.2
No Model
DT
502
L6
49-69
260693R
NAVISTAR
5.5
WD9, WDR9
335
L4
260693R1
NAVISTAR
5.5
TD-9A
335
L4
260693R1
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
260693R1
NAVISTAR
5.5
WD9, WDR9
335
L4
260693R1
NAVISTAR
5.7
No Model
350
L4
260693R1
NAVISTAR
6.1
W9, TD9
370
L4
260749R1
NAVISTAR
5.5
TD-9A
335
L4
260749R1
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
260749R1
NAVISTAR
5.5
WD9, WDR9
335
L4
260749R1
NAVISTAR
5.7
No Model
350
L4
260749R1
NAVISTAR
6.1
W9, TD9
370
L4
261025E
HERCULES
2.1
GO-130
130
L3
261025E
HERCULES
2.4
GO-149
149
L3
261265DB
NAVISTAR
4.1
248
L4
261265R
NAVISTAR
4.3
No Model
264
L4
261265R1
NAVISTAR
4.1
248
L4
261265R1
NAVISTAR
4.3
400
264
L6
63-74
261265R1
NAVISTAR
4.6
UTD282
282
L6
53-70
261265R3
NAVISTAR
4.1
248
L4
261265R41
NAVISTAR
4.1
248
L4
261265R41
NAVISTAR
4.3
400
264
L6
63-74
261265R41
NAVISTAR
4.6
UTD282
282
L6
53-70
263126R1
NAVISTAR
11.3
No Model
691
L6
263126R2
NAVISTAR
11.3
No Model
691
L6
263234G
NAVISTAR
9.0
No Model
551
V8
153.9
Model
VIN
P9390
536
MIE
50-62
78-85

Casting
Manufacturer
Liter
Model
CID Cyl
Year
264
CHRYSLER
2.8
No Model
264
GM
2.8
No Model
173
V6
84-87
173
V6
264
GM
2.8
No Model
82-85
173
V6
264
GM
2.8
79-80
No Model
173
V6
264
GM
82-85
2.8
No Model
173
V6
264
80-86
GM
2.8
No Model
173
V6
82-84
2656278
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2656278
CHRYSLER
5.2
No Model
318
V8
73-76
2656278
CHRYSLER
5.2
No Model
318
V8
77-80
2656278
CHRYSLER
5.2
No Model
318
V8
69-76
2656278
CHRYSLER
5.2
No Model
318
V8
77-79
2656278
CHRYSLER
5.2
No Model
318
V8
80
2656278
CHRYSLER
5.2
No Model
318
V8
78-80
2656278
CHRYSLER
5.2
No Model
318
V8
81-82
2656278
CHRYSLER
5.2
No Model
318
V8
81-82
2656278
CHRYSLER
5.2
No Model
318
V8
81-82
2656278
CHRYSLER
5.2
No Model
318
V8
81-82
2656278
CHRYSLER
5.2
No Model
318
V8
81-85
2656278
CHRYSLER
5.2
No Model
318
V8
81-82
2656278
CHRYSLER
5.2
No Model
318
V8
83-91
2656278
CHRYSLER
5.2
No Model
318
V8
81-82
2656278
CHRYSLER
5.2
No Model
318
V8
83-87
2656278
CHRYSLER
5.2
No Model
318
V8
83-89
2656278
CHRYSLER
5.2
No Model
318
V8
83-87
2656278
CHRYSLER
5.2
No Model
318
V8
83-84
2656278
CHRYSLER
5.2
No Model
318
V8
62-67
2658268
CHRYSLER
4.5
No Model
273
273
V8
62-69
2658268
CHRYSLER
5.0
FURY
303
V8
56-58
2658268
CHRYSLER
5.1
No Model
313
V8
57-66
2658268
CHRYSLER
5.3
No Model
326
V8
55-57
2658268
CHRYSLER
5.6
No Model
340
V8
68-73
2658278
CHRYSLER
4.5
No Model
273
V8
62-69
2658278
CHRYSLER
5.0
FURY
303
V8
56-58
2658278
CHRYSLER
5.1
No Model
313
V8
57-66
2658278
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2658278
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2658278
CHRYSLER
5.2
No Model
318
V8
83-89
2658278
CHRYSLER
5.2
No Model
318
V8
77-80
2658278
CHRYSLER
5.2
No Model
318
V8
69-76
2658278
CHRYSLER
5.2
No Model
318
V8
78-80
2658278
CHRYSLER
5.2
No Model
318
V8
81-82
2658278
CHRYSLER
5.2
No Model
318
V8
81-82
2658278
CHRYSLER
5.2
No Model
318
V8
81-82
2658278
CHRYSLER
5.2
No Model
318
V8
81-82
2658278
CHRYSLER
5.2
No Model
318
V8
83-89
2658278
CHRYSLER
5.2
No Model
318
V8
83-84
2658278
CHRYSLER
5.3
No Model
326
V8
55-57
2658278
CHRYSLER
5.6
No Model
340
V8
68-73
2658393
CHRYSLER
4.5
No Model
273
V8
62-69
2658393
CHRYSLER
5.0
FURY
303
V8
56-58
2658393
CHRYSLER
5.1
No Model
313
V8
57-66
2658393
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2658393
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2658393
CHRYSLER
5.2
No Model
318
V8
98-99
2658393
CHRYSLER
5.2
No Model
318
V8
83-89
2658393
CHRYSLER
5.2
No Model
318
V8
77-80
2658393
CHRYSLER
5.2
No Model
318
V8
69-76
2658393
CHRYSLER
5.2
No Model
318
V8
77-79
2658393
CHRYSLER
5.2
No Model
318
V8
78-80
537
VIN
273
273

Casting
Manufacturer
Liter
Model
CID Cyl
Year
2658393
CHRYSLER
5.2
No Model
2658393
CHRYSLER
5.2
No Model
318
V8
81-82
318
V8
2658393
CHRYSLER
5.2
No Model
81-82
318
V8
2658393
CHRYSLER
5.2
81-82
No Model
318
V8
2658393
CHRYSLER
81-82
5.2
No Model
318
V8
2658393
81-82
CHRYSLER
5.2
No Model
318
V8
81-82
2658393
CHRYSLER
5.2
No Model
318
V8
83-89
2658393
CHRYSLER
5.2
No Model
318
V8
83-84
2658393
CHRYSLER
5.3
No Model
326
V8
55-57
2658393
CHRYSLER
5.6
No Model
340
V8
68-73
2658998
CHRYSLER
3.7
No Model
225
L6
76-87
2658998
CHRYSLER
3.7
No Model
225
L6
69-80
2658998
CHRYSLER
3.7
No Model
225
L6
60-80
267
GM
3.8
No Model
231
V6
84-86
267
GM
3.8
No Model
231
V6
85-86
267
GM
3.8
No Model
231
V6
87-88
267
GM
3.8
No Model
231
V6
83-87
267
GM
3.8
No Model
231
V6
86-87
2670
GM
1.8
No Model
112
L4
84-87
2670
GM
1.8
No Model
112
L4
82-87
267267
NAVISTAR
4.3
400
264
L6
63-74
267267
NAVISTAR
4.6
UTD282
282
L6
53-70
267267
NAVISTAR
4.8
666, 706, 766
291
L6
268
GM
3.1
No Model
191
V6
00-03
268
GM
3.1
No Model
191
V6
93-99
268
GM
3.4
ALERO
207
V6
99-00
268
GM
3.4
CAMARO
207
V6
93-95
268
GM
3.4
GRAND AM
204
V6
96-04
2680
GM
5.4
No Model
327
V8
62-67
2690
GM
5.7
No Model
350
V8
78-79
2690
GM
5.7
No Model
350
V8
80-88
2690
GM
5.7
No Model
350
V8
77-82
2690
GM
5.7
No Model
350
V8
79-88
2690
GM
5.7
No Model
350
V8
80-83
2690
GM
5.7
No Model
350
V8
74-76
2690
GM
5.7
No Model
350
V8
68-75
2701-6303-E
FORD
4.0
6000
242
L6
60-70
27068D
HERCULES
1.3
IX5
79
L4
27068D
HERCULES
1.3
IX5
79
L4
27068D
HERCULES
1.6
IXF3
95
L4
27068D
HERCULES
1.6
IXF3
95
L4
27068D
HERCULES
2.0
IXK3
123
L4
27068D
HERCULES
2.0
IXK3
123
L4
2-71
DDC
2.3
2-71
142
L2
27225D
HERCULES
1.3
IX5
79
L4
27225D
HERCULES
1.3
IX5
79
L4
27225D
HERCULES
1.6
IXF3
95
L4
27225D
HERCULES
1.6
IXF3
95
L4
27225D
HERCULES
2.0
IXK3
123
L4
27225D
HERCULES
2.0
IXK3
123
L4
2737E
FORD
1.6
PINTO,CAPRI
98
L4
2744406R1
NAVISTAR
3.9
544
D239
239
L4
2744406R1
NAVISTAR
4.0
784
D-246
246
L4
275606R1
NAVISTAR
5.5
TD-9A
335
L4
275606R1
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
275606R1
NAVISTAR
5.5
WD9, WDR9
335
L4
275606R1
NAVISTAR
5.7
No Model
350
L4
275606R1
NAVISTAR
6.1
W9, TD9
370
L4
275708R92
NAVISTAR
5.5
TD-9A
335
L4
538
VIN
70-73

Casting
Manufacturer
Liter
Model
275708R92
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
275708R92
NAVISTAR
5.5
WD9, WDR9
335
L4
275708R92
NAVISTAR
5.7
No Model
350
L4
275708R92
NAVISTAR
6.1
W9, TD9
370
L4
277100R1
NAVISTAR
13.4
A SERIES
817
L6
277100R1
NAVISTAR
13.4
B SERIES
817-B
817
L6
277100R1
NAVISTAR
13.4
C SERIES
817-C
817
L6
2774220
GM
4.8
No Model
292
L6
63-73
2774220
GM
4.8
No Model
292
L6
74-77
2774220
GM
4.8
No Model
292
L6
78-90
2774220N
GM
4.8
No Model
292
L6
63-73
2774220N
GM
4.8
No Model
292
L6
74-77
2774220N
GM
4.8
No Model
292
L6
78-90
2780513
CHRYSLER
7.0
HEMI
HJR
426
V8
66-71
2780533
CHRYSLER
7.0
HEMI
HJR
426
V8
66-71
278062R1
NAVISTAR
17.9
TD24
1091
L6
279062R1
NAVISTAR
17.9
TD24
1091
L6
279064R91
NAVISTAR
17.9
TD24
1091
L6
2843686
CHRYSLER
5.3
No Model
326
V8
55-57
2843868
CHRYSLER
4.5
No Model
273
V8
62-69
2843868
CHRYSLER
5.0
FURY
303
V8
56-58
2843868
CHRYSLER
5.1
No Model
313
V8
57-66
2843868
CHRYSLER
5.6
No Model
340
V8
68-73
2843935
CHRYSLER
2.8
BARRACUDA
170
L6
60-71
2843935
CHRYSLER
3.7
No Model
225
L6
76-87
2843935
CHRYSLER
3.7
No Model
225
L6
69-80
2843935
CHRYSLER
3.7
No Model
225
L6
60-80
2843939
CHRYSLER
2.8
BARRACUDA
170
L6
60-71
2843963
CHRYSLER
2.8
BARRACUDA
170
L6
60-71
2867417
GM
5.0
No Model
305
V6
60-75
288025
HERCULES
5.6
WXC
339
L6
28924D
HERCULES
0.9
NXA
57
L2
28924D
HERCULES
1.8
IXA, IXB3
113
L4
28924D
HERCULES
2.2
IXA, IXB3
133
L4
28924D
HERCULES
2.2
IXA, IXB3
133
L4
289878C1
NAVISTAR
7.8
No Model
478
V8
56-78
289878CI
CHRYSLER
7.8
No Model
478
V8
69-77
29
CHRYSLER
3.0
No Model
181
V6
87-95
29
CHRYSLER
3.0
No Model
181
V6
91-92
29
CHRYSLER
3.0
No Model
181
V6
91-92
29
CHRYSLER
3.0
No Model
181
V6
90-92
29
HYUNDAI
3.0
SONATA
183
V6
89-98
29
MITSUBISHI
3.0
GALANT
181
V6
88-92
29
MITSUBISHI
3.0
MONTERO
181
V6
95-03
29
MITSUBISHI
3.0
No Model
181
V6
87-91
2924
HONDA
3.2
PASSPORT
193
V6
94-97
2924
HONDA
3.2
PASSPORT
193
V6
94-02
2924
ISUZU
3.2
TROOPER
193
V6
92-04
2951265
CHRYSLER
3.2
No Model
198
L6
74-74
2951979
CHRYSLER
3.2
No Model
198
L6
74-74
2954265
CHRYSLER
3.2
No Model
198
L6
74-74
29590D
HERCULES
0.9
NXA
57
L2
29590D
HERCULES
1.3
IX5
79
L4
29590D
HERCULES
1.3
IX5
79
L4
29590D
HERCULES
1.6
IXF3
95
L4
29590D
HERCULES
1.6
IXF3
95
L4
29590D
HERCULES
1.8
IXA, IXB3
113
L4
29590D
HERCULES
2.0
IXK3
123
L4
29590D
HERCULES
2.0
IXK3
123
L4
539
VIN
273
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
29590D
HERCULES
2.2
IXA, IXB3
133
L4
29590D
HERCULES
2.2
IXA, IXB3
133
L4
296733C1
NAVISTAR
9.0
No Model
549
V8
60-78
2991345
CHRYSLER
5.2
DAKOTA
318
V8
88-91
2991345
CHRYSLER
5.2
DAKOTA
318
V8
92-04
2991345
CHRYSLER
5.2
No Model
318
V8
77-80
2991345
CHRYSLER
5.2
No Model
318
V8
69-76
2991345
CHRYSLER
5.2
No Model
318
V8
77-79
2991345
CHRYSLER
5.2
No Model
318
V8
78-80
2991345
CHRYSLER
5.2
No Model
318
V8
81-82
2991345
CHRYSLER
5.2
No Model
318
V8
81-82
2991345
CHRYSLER
5.2
No Model
318
V8
81-82
2991345
CHRYSLER
5.2
No Model
318
V8
81-82
2991345
CHRYSLER
5.2
No Model
318
V8
83-89
2991345
CHRYSLER
5.2
No Model
318
V8
83-84
29A-6303-A
FORD
3.9
No Model
239
V8
46-53
29B-6303-B
FORD
3.9
No Model
239
V8
46-53
2A37
VOLVO
2.3
131A
141
L4
85-85
2A37
VOLVO
2.3
740
141
L4
85-87
2A-3907
CATERPILLAR
0.6
STARTING MOTOR
36
L2
2A717A
AUSTIN
0.9
No Model
58
L4
52-62
2A717A
AUSTIN
0.9
SPRITE
58
L4
56-65
2A717A
MG
0.9
MK I, MK II, MIDGET
58
L4
52-62
2A717A
MG
0.9
SPRITE MK I
58
L4
61-62
2A-717-A
AUSTIN
0.9
No Model
58
L4
52-62
2A-717-A
MG
0.9
MK I, MK II, MIDGET
58
L4
52-62
2A-717-A
MG
0.9
SPRITE MK I
58
L4
61-62
2A829
AUSTIN
0.9
No Model
58
L4
52-62
2A829
AUSTIN
0.9
SPRITE
58
L4
56-65
2A-829
AUSTIN
0.9
No Model
58
L4
52-62
2A-829
MG
0.9
MK I, MK II, MIDGET
58
L4
52-62
2A-829
MG
0.9
SPRITE MK I
58
L4
61-62
2B-4849
CATERPILLAR
3.6
No Model
221
L4
2B6488
CATERPILLAR
20.4
D342
1246
L6
2B6488
CATERPILLAR
20.4
D8
1246
L6
2B6488
CATERPILLAR
20.4
D8
1246
L6
2B6488
CATERPILLAR
20.4
D8
1246
L6
2B-6488
CATERPILLAR
16.3
No Model
992
L6
2B-6488
CATERPILLAR
20.4
13000
1246
L6
2BA
FORD
3.9
No Model
239
V8
46-53
2D
FORD
2.0
RANGER
122
L4
83-88
2D
FORD
2.0
RANGER
122
L4
84-85
2D
FORD
2.3
LSG423
140
L4
2D
FORD
2.3
No Model
140
L4
81-82
2D
FORD
2.3
No Model
140
L4
80-84
2D
FORD
2.3
No Model
140
L4
85-88
2D
FORD
2.3
No Model
140
L4
89-98
2D
FORD
2.3
No Model
140
L4
76-80
2D
FORD
2.3
No Model
140
L4
91-93
2D
FORD
2.3
No Model
140
L4
80-87
2D
FORD
2.3
No Model
140
L4
79-80
2D
FORD
2.3
No Model
140
L4
83-88
2D
FORD
2.3
No Model
140
L4
76-79
2D
FORD
2.3
No Model
140
L4
83-85
2GA
FORD
3.7
No Model
226
L6
47-52
2H
FORD
4.1
No Model
250
L6
69-80
2H
FORD
4.1
No Model
250
L6
79-81
2H0862
CATERPILLAR
13.6
D339
831
L4
2H0862
CATERPILLAR
13.6
D339
831
L4
87
540
C
C
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
2H862
CATERPILLAR
13.6
D7
831
L4
2H-862
CATERPILLAR
11.4
No Model
693
L4
2H-862
CATERPILLAR
13.6
7700
831
L4
2HA
FORD
4.1
No Model
250
L6
69-80
2HA
FORD
4.1
No Model
250
L6
79-81
2H-A
FORD
4.1
No Model
250
L6
69-80
2H-A
FORD
4.1
No Model
250
L6
79-81
2HAB
FORD
4.1
No Model
250
L6
69-80
2HAB
FORD
4.1
No Model
250
L6
79-81
2J
FORD
4.2
No Model
255
V8
80-82
2M
FORD
5.0
No Model
302
V8
68-69
2M
FORD
5.0
No Model
302
V8
68-73
2M
FORD
5.0
No Model
302
V8
74-82
2M
FORD
5.0
No Model
302
V8
74-81
2M
TOYOTA
2.3
CROWN
2M
137
L6
68-72
2M
TOYOTA
2.6
CRESSIDA
4M-E
156
L6
79-80
2M
TOYOTA
2.6
No Model
4M
156
L6
73-79
2M5170
CATERPILLAR
5.7
D330
CB
350
L4
2M5170
CATERPILLAR
5.7
D330
D4
350
L4
2M-5170
CATERPILLAR
5.1
No Model
312
L4
2M7566
CATERPILLAR
4.1
D2
252
L4
2M7566
CATERPILLAR
4.1
D311H
252
L4
2M7566
CATERPILLAR
4.1
D320
252
L4
2M7566
CATERPILLAR
4.1
D320A
252
L4
2MA
FORD
5.0
No Model
302
V8
68-69
2MA
FORD
5.0
No Model
302
V8
68-73
2MA
FORD
5.0
No Model
302
V8
74-82
2MA
FORD
5.0
No Model
302
V8
74-81
2MAB
FORD
5.0
No Model
302
V8
68-69
2MAB
FORD
5.0
No Model
302
V8
68-73
2MAB
FORD
5.0
No Model
302
V8
74-82
2MAB
FORD
5.0
No Model
302
V8
74-81
2MAC
FORD
5.0
No Model
302
V8
68-69
2MAC
FORD
5.0
No Model
302
V8
68-73
2MAC
FORD
5.0
No Model
302
V8
74-82
2MAC
FORD
5.0
No Model
302
V8
74-81
2MAD
FORD
5.0
No Model
302
V8
68-69
2MAD
FORD
5.0
No Model
302
V8
68-73
2MAD
FORD
5.0
No Model
302
V8
74-82
2MAD
FORD
5.0
No Model
302
V8
74-81
2MAE
FORD
5.0
No Model
302
V8
95-97
2MAE
FORD
5.0
No Model
302
V8
87-93
2MAE
FORD
5.0
No Model
302
V8
74-82
2MAE
FORD
5.0
No Model
302
V8
83-87
2MAE
FORD
5.0
No Model
302
V8
84-87
2MAE
FORD
5.0
No Model
302
V8
88-93
2MAE
FORD
5.0
No Model
302
V8
84-87
2MAE
FORD
5.0
No Model
302
V8
86-86
2MAE
FORD
5.0
No Model
302
V8
85-97
2MAE
FORD
5.0
No Model
302
V8
91-95
2MG2
TOYOTA
2.3
CROWN
2M
137
L6
68-72
2MG2
TOYOTA
2.6
CRESSIDA
4M-E
156
L6
79-80
2MG2
TOYOTA
2.6
No Model
4M
156
L6
73-79
2N
FORD
2.0
TRACTORS, 2N,8N,9N,NAA
2N
120
L4
39-54
2N
FORD
4.9
CSG-649
300
L6
65-93
2N
FORD
4.9
No Model
300
L6
76-85
2N
FORD
4.9
No Model
300
L6
82-84
2N
FORD
4.9
No Model
300
L6
73-79
2N
FORD
4.9
No Model
300
L6
78
541
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
2N
FORD
4.9
No Model
2N
FORD
4.9
No Model
300
L6
78-79
300
L6
2NA
FORD
4.9
83-84
CSG-649
300
L6
2NA
FORD
65-93
4.9
No Model
300
L6
2NA
76-85
FORD
4.9
No Model
300
L6
82-84
2NA
FORD
4.9
No Model
300
L6
73-79
2NA
FORD
4.9
No Model
300
L6
78
2NA
FORD
4.9
No Model
300
L6
78-79
2NA
FORD
4.9
No Model
300
L6
83-84
2NAB
FORD
4.9
CSG-649
300
L6
65-93
2NAB
FORD
4.9
No Model
300
L6
76-85
2NAB
FORD
4.9
No Model
300
L6
82-84
2NAB
FORD
4.9
No Model
300
L6
73-79
2NAB
FORD
4.9
No Model
300
L6
78
2NAB
FORD
4.9
No Model
300
L6
78-79
2NAB
FORD
4.9
No Model
300
L6
83-84
2NABC
FORD
4.9
CSG-649
300
L6
65-93
2NABC
FORD
4.9
No Model
300
L6
76-85
2NABC
FORD
4.9
No Model
300
L6
82-84
2NABC
FORD
4.9
No Model
300
L6
85-86
2NABC
FORD
4.9
No Model
300
L6
73-79
2NABC
FORD
4.9
No Model
300
L6
78
2NABC
FORD
4.9
No Model
300
L6
78-79
2NABC
FORD
4.9
No Model
300
L6
83-84
2NABC
FORD
4.9
No Model
300
L6
85-86
2NABC
FORD
4.9
No Model
300
L6
87-96
2P1491
CATERPILLAR
7.0
3304
CB
425
L4
2P1491
CATERPILLAR
7.0
3304
DI
425
L4
2P1491
CATERPILLAR
7.0
3304
SP
425
L4
2P1491
CATERPILLAR
7.0
D330C
CB
425
L4
2P1491
CATERPILLAR
7.0
D330C
SP
425
L4
2P1686
CATERPILLAR
7.0
D330C
CB
425
L4
2P1686
CATERPILLAR
7.0
D330C
SP
425
L4
2P2800
CATERPILLAR
24.1
353
1473
L6
2P2800
CATERPILLAR
24.1
353
C/B
1473
L6
2P2824
CATERPILLAR
10.5
3306
CB
638
L6
2P2824
CATERPILLAR
10.5
3306
DI
638
L6
2P2824
CATERPILLAR
10.5
3306
SP
638
L6
2P2824
CATERPILLAR
10.5
3306
SP
638
L6
2P2824
CATERPILLAR
10.5
3306
SP
638
L6
2P2842
CATERPILLAR
8.6
1673
CB
525
L6
2P2842
CATERPILLAR
8.6
D333
CB
525
L6
2P2842
CATERPILLAR
10.5
1673C
CB
638
L6
2P2842
CATERPILLAR
10.5
1673C
SP
638
L6
2P2842
CATERPILLAR
10.5
3306
CB
638
L6
2P2842
CATERPILLAR
10.5
3306
DI
638
L6
2P2842
CATERPILLAR
10.5
3306
SP
638
L6
2P2842
CATERPILLAR
10.5
3306
SP
638
L6
2P2842
CATERPILLAR
10.5
334
638
L6
2P2842
CATERPILLAR
10.5
D333C
CB
638
L6
2P2842
CATERPILLAR
10.5
D333C
SP
638
L6
2P3833
CATERPILLAR
14.6
1693
893
L6
2P3833
CATERPILLAR
14.6
1693
893
L6
2P3833
CATERPILLAR
14.6
1693
893
L6
2P3833
CATERPILLAR
14.6
1693
893
L6
2P3833
CATERPILLAR
14.6
1693
893
L6
2P3838
CATERPILLAR
14.6
1693
893
L6
2P3838
CATERPILLAR
14.6
1693
893
L6
2P3838
CATERPILLAR
14.6
1693
893
L6
542
VIN

Casting
Manufacturer
Liter
Model
VIN
2P3838
CATERPILLAR
14.6
1693
893
L6
2P3838
CATERPILLAR
14.6
1693
893
L6
2P3838
CATERPILLAR
14.6
343
893
L6
2P3838
CATERPILLAR
14.6
D343
893
L6
2P3838
CATERPILLAR
14.6
D343
893
L6
2P3838
CATERPILLAR
14.6
G343
893
L6
2P3840
CATERPILLAR
14.6
1693
893
L6
2P3840
CATERPILLAR
14.6
1693
893
L6
2P3840
CATERPILLAR
14.6
1693
893
L6
2P3840
CATERPILLAR
14.6
1693
893
L6
2P3840
CATERPILLAR
14.6
1693
893
L6
2P3840
CATERPILLAR
14.6
343
893
L6
2P3840
CATERPILLAR
14.6
D343
893
L6
2P3840
CATERPILLAR
14.6
D343
893
L6
2P3840
CATERPILLAR
14.6
G343
893
L6
2P3841
CATERPILLAR
9.8
340
597
L4
2P6213
CATERPILLAR
7.0
3304
CB
425
L4
2P6213
CATERPILLAR
7.0
3304
DI
425
L4
2P6213
CATERPILLAR
7.0
3304
SP
425
L4
2P6213
CATERPILLAR
7.0
D330C
CB
425
L4
2P6213
CATERPILLAR
7.0
D330C
SP
2S0758
CATERPILLAR
19.5
D346
2S5570
CATERPILLAR
5.7
D330
2S5570
CATERPILLAR
5.7
2T
FORD
2T
CID Cyl
Year
425
L4
1191
V8
CB
350
L4
D330
D4
350
L4
5.4
No Model
HD
330
V8
66-76
FORD
5.4
No Model
LD
330
V8
62-65
2T
FORD
5.8
No Model
352
V8
58-67
2T
FORD
5.9
No Model
360
V8
68-78
2T
TOYOTA
1.6
COROLLA
2T-C
97
L4
71-79
2TA
FORD
5.4
No Model
HD
330
V8
66-76
2TA
FORD
5.4
No Model
LD
330
V8
62-65
2TA
FORD
5.8
No Model
352
V8
58-67
2TA
FORD
5.9
No Model
360
V8
68-78
2U
FORD
6.4
No Model
390
V8
61-76
2U
FORD
6.4
No Model
390
V8
68-76
2UA
FORD
6.4
No Model
390
V8
61-76
2UA
FORD
6.4
No Model
390
V8
68-76
2W2300
CATERPILLAR
14.6
3406
893
L6
2W2300
CATERPILLAR
14.6
3406
893
L6
2W2300
CATERPILLAR
14.6
3406
SP
893
L6
2Y
FORD
7.5
No Model
460
V8
68-73
2Y
FORD
7.5
No Model
460
V8
74-78
2Y
FORD
7.5
No Model
460
V8
74-77
2Y
FORD
7.5
No Model
460
V8
75-76
2Y
FORD
7.5
No Model
460
V8
78
2Y
FORD
7.5
No Model
460
V8
74-79
2Y
TOYOTA
2.0
VAN
3Y-EC
122
L4
84-85
2Y4504
CATERPILLAR
7.0
3304
CB
425
L4
2Y4504
CATERPILLAR
7.0
3304
DI
425
L4
2Y4504
CATERPILLAR
7.0
3304
SP
425
L4
2Y4504
CATERPILLAR
7.0
D330C
CB
425
L4
2Y4504
CATERPILLAR
7.0
D330C
SP
425
L4
2Y4506
CATERPILLAR
10.5
1673C
CB
638
L6
2Y4506
CATERPILLAR
10.5
1673C
SP
638
L6
2Y4506
CATERPILLAR
10.5
3306
CB
638
L6
2Y4506
CATERPILLAR
10.5
3306
DI
638
L6
2Y4506
CATERPILLAR
10.5
3306
SP
638
L6
2Y4506
CATERPILLAR
10.5
D333C
CB
638
L6
2Y4506
CATERPILLAR
10.5
D333C
SP
638
L6
543

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
2Y68-76
FORD
7.5
No Model
2YA
FORD
7.5
No Model
460
V8
68-73
460
V8
2YA
FORD
7.5
No Model
68-73
460
V8
2YA
FORD
7.5
74-78
No Model
460
V8
2YA
FORD
74-77
7.5
No Model
460
V8
2YA
75-76
FORD
7.5
No Model
460
V8
78
2YA
FORD
7.5
No Model
460
V8
74-79
2YAB
FORD
7.5
No Model
460
V8
68-73
2YAB
FORD
7.5
No Model
460
V8
74-78
2YAB
FORD
7.5
No Model
460
V8
74-77
2YAB
FORD
7.5
No Model
460
V8
75-76
2YAB
FORD
7.5
No Model
460
V8
78
2YAB
FORD
7.5
No Model
460
V8
74-79
2YABC
FORD
7.5
No Model
460
V8
68-73
2YABC
FORD
7.5
No Model
460
V8
74-78
2YABC
FORD
7.5
No Model
460
V8
74-77
2YABC
FORD
7.5
No Model
460
V8
75-76
2YABC
FORD
7.5
No Model
460
V8
78
2YABC
FORD
7.5
No Model
460
V8
74-79
2YAC
FORD
7.5
No Model
460
V8
74-77
2YAC
FORD
7.5
No Model
460
V8
75-76
2YAC
FORD
7.5
No Model
460
V8
78
3.218528R1
NAVISTAR
4.4
510B
268
L4
75-85
3000140
CUMMINS
14.0
88NT
FFC
855
L6
87-89
3000140
CUMMINS
14.0
NT SERIES
855
L6
88-91
300102
CHRYSLER
5.2
No Model
320
V8
55
300102
HUDSON
5.2
No Model
320
L8
55-56
300102
HUDSON
5.7
No Model
352
L8
56
300102
PACKARD
5.2
No Model
320
L8
55
300102
PACKARD
5.8
No Model
352
V8
55-56
300102
PACKARD
6.1
No Model
374
L8
51-56
300102
STUDEBAKER
5.7
No Model
352
V8
56-59
300106
HUDSON
4.2
No Model
254
L8
32-52
30011
WAUKESHA
0.0
VIL
L4
3003000
CUMMINS
18.8
K SERIES
1150
L6
3003453
CHRYSLER
4.0
No Model
242
L6
89-90
3003453
CHRYSLER
4.0
No Model
242
L6
87-88
3003453
CHRYSLER
4.0
No Model
242
L6
91-97
301015
TRIUMPH
2.1
No Model
130
L4
62-67
3016096
CUMMINS
18.8
K SERIES
1150
L6
301794
HUDSON
4.3
No Model
262
L6
48-52
3024923
CUMMINS
14.0
88NT
FFC
855
L6
87-89
3027158
CUMMINS
28.0
V1710
V12
1710
3027931
CUMMINS
10.0
L10
3027931
CUMMINS
10.0
L10
302811
PACKARD
4.6
302811
STUDEBAKER
303011
A/J
V 12
611
L6
85-90
611
L6
91-96
No Model
282
L8
35-47
4.6
No Model
282
L8
39-47
HUDSON
3.8
No Model
232
L6
50-54
303034
TRIUMPH
2.0
No Model
CL
122
L4
75-81
303034
TRIUMPH
2.0
No Model
CV
122
L4
75-81
303037
HUDSON
4.3
No Model
262
L6
48-52
304668
HUDSON
5.1
No Model
308
L6
55-56
304852
PACKARD
4.6
No Model
282
L8
35-47
304852
STUDEBAKER
4.6
No Model
282
L8
39-47
305
MAZDA
1.6
No Model
97
L4
70-81
305073
TRIUMPH
1.1
No Model
70
L4
62-64
305950R1
NAVISTAR
2.5
385
155
L3
3059510R1
NAVISTAR
2.9
454
179
L3
3059514R1
NAVISTAR
5.1
706
310
L6
91->
C
D155
D-310
544

Casting
Manufacturer
Liter
Model
VIN
3059514R1
NAVISTAR
5.8
826
358
L6
305951R1
NAVISTAR
5.1
706
D-310
310
L6
306275
GM
4.4
No Model
267
V8
306275
GM
5.0
No Model
305
V8
82
306275
GM
5.0
No Model
305
V8
81-87
306275
GM
5.0
No Model
305
V8
76-79
306275
GM
5.0
No Model
305
V8
80-81
306275
GM
5.0
No Model
305
V8
78-88
306275
GM
5.0
No Model
305
V8
83
306275
GM
5.0
No Model
305
V8
77-79
306275
GM
5.7
No Model
350
V8
78-79
306275
GM
5.7
No Model
350
V8
80-88
306275
GM
5.7
No Model
350
V8
77-82
306275
GM
5.7
No Model
350
V8
79-88
306275
GM
5.7
No Model
350
V8
80-83
306275
GM
5.7
No Model
350
V8
74-76
306275
GM
5.7
No Model
350
V8
68-75
306276
GM
4.4
No Model
267
V8
79-82
306276
GM
5.0
No Model
305
V8
82
306276
GM
5.0
No Model
305
V8
81-87
306276
GM
5.0
No Model
305
V8
76-79
306276
GM
5.0
No Model
305
V8
80-81
306276
GM
5.0
No Model
305
V8
78-88
306276
GM
5.0
No Model
305
V8
83
306276
GM
5.0
No Model
305
V8
77-79
306276
GM
5.7
No Model
350
V8
78-79
306276
GM
5.7
No Model
350
V8
80-88
306276
GM
5.7
No Model
350
V8
70-75
306276
GM
5.7
No Model
350
V8
76
306276
GM
5.7
No Model
350
V8
77-82
306276
GM
5.7
No Model
350
V8
79-88
306276
GM
5.7
No Model
350
V8
80-83
306276
GM
5.7
No Model
350
V8
74-76
306276
GM
5.7
No Model
350
V8
68-75
3064291
CUMMINS
14.0
N14
N14
855
L6
91-00
3064291
CUMMINS
14.0
N14
N14
855
L6
91-00
3073707
CUMMINS
10.0
L10
611
L6
85-90
3073707
CUMMINS
10.0
L10
611
L6
91-96
3073707
CUMMINS
11.0
M11
661
L6
91-01
308129
SAAB
1.7
No Model
104
L4
68-72
308129
TRIUMPH
2.0
No Model
CL
122
L4
75-81
308129
TRIUMPH
2.0
No Model
CV
122
L4
75-81
308397R
NAVISTAR
2.7
340
166
L4
308397R1
NAVISTAR
2.7
340
166
L4
308397R31
NAVISTAR
2.7
340
166
L4
308397R31
NAVISTAR
2.7
No Model
164
L4
308397R31
NAVISTAR
3.0
504
188
L4
30926D
NAVISTAR
1.9
No Model
113
L4
37-40
30928DA
NAVISTAR
1.9
No Model
113
L4
37-40
30R
NISSAN
2.4
STANZA
146
L4
91-98
31
CHRYSLER
1.6
COLT
98
L4
79-80
31
CHRYSLER
1.6
No Model
98
L4
85-89
31
CHRYSLER
1.8
COLT
107
L4
89-93
31
MITSUBISHI
1.6
MIRAGE
98
L4
85-86
31
MITSUBISHI
1.6
MIRAGE
98
L4
87-88
3101001
GM
5.4
No Model
327
V8
68-69
310372
FORD
2.2
TRACTORS, NAA,600,700
134
L4
54-60
310372
FORD
2.4
501
IND
144
L4
61-67
310372
FORD
2.4
No Model
GAS
144
L4
61-67
91->
545
CID Cyl
Year
79-82

Casting
Manufacturer
Liter
Model
CID Cyl
Year
310372
FORD
2.8
No Model
31051
GM
5.0
No Model
172
L4
53-80
305
V8
31051
GM
5.0
No Model
76-79
305
V8
31051
GM
5.0
80-81
No Model
305
V8
310514
GM
78-88
4.4
No Model
267
V8
310514
79-82
GM
5.0
No Model
305
V8
82
310514
GM
5.0
No Model
305
V8
81-87
310514
GM
5.0
No Model
305
V8
76-79
310514
GM
5.0
No Model
305
V8
80-81
310514
GM
5.0
No Model
305
V8
78-88
310514
GM
5.0
No Model
305
V8
83
310514
GM
5.0
No Model
305
V8
77-79
310514
GM
5.7
No Model
350
V8
78-79
310514
GM
5.7
No Model
350
V8
80-88
310514
GM
5.7
No Model
350
V8
70-75
310514
GM
5.7
No Model
350
V8
76
310514
GM
5.7
No Model
350
V8
77-82
310514
GM
5.7
No Model
350
V8
79-88
310514
GM
5.7
No Model
350
V8
80-83
310514
GM
5.7
No Model
350
V8
74-76
310514
GM
5.7
No Model
350
V8
68-75
3105305
CHRYSLER
5.2
No Model
A/J
320
V8
55
3105305
HUDSON
5.2
No Model
320
L8
55-56
3105305
HUDSON
5.7
No Model
352
L8
56
3109607
CHRYSLER
3.9
NASH
A/J
235
L6
33-47
311
GM
2.5
No Model
151
L4
78-80
311406
MG
1.5
MIDGET
91
L4
75-80
311406
TRIUMPH
1.5
No Model
FH
91
L4
73-80
311406
TRIUMPH
1.5
No Model
FM
91
L4
73-80
3124294F
CHRYSLER
3.2
No Model
A/J
196
L6
53-65
3125265
CHRYSLER
3.9
NASH
A/J
235
L6
33-47
3127261
CHRYSLER
3.0
RAMBLER
AMC
184
L6
49-61
3128481
DEUTZ
0.0
BF L913 TURBO
L6
3128481
DEUTZ
4.1
BF4L913 TURBO
249
L4
3128481
DEUTZ
4.1
BF4L913C
249
L4
3128481
DEUTZ
6.1
BF6L913 TURBO
374
L6
3128481
DEUTZ
6.1
BF6L913/C
374
L6
3128562
CHRYSLER
3.9
NASH
A/J
235
L6
33-47
3128662F
CHRYSLER
3.9
NASH
A/J
235
L6
33-47
3130331F
CHRYSLER
3.0
RAMBLER
AMC
184
L6
49-61
313033F
CHRYSLER
3.0
RAMBLER
AMC
184
L6
49-61
31312700
PERKINS
2.5
152
152
L3
31315127
PERKINS
3.2
192
192
L4
31315135
PERKINS
3.3
203
203
L4
31315841
MASSEY FERGUSON
5.2
4.318
318
L4
31315841
PERKINS
5.2
318
318
L4
31315843
MASSEY FERGUSON
5.2
4.318
318
L4
31315843
PERKINS
5.2
318
318
L4
31315870
PERKINS
3.9
236
236
L4
31315870
PERKINS
3.9
236
236
L4
31315870
PERKINS
3.9
236
D(1)
236
L4
31315870
PERKINS
3.9
236
236
L4
31315870
PERKINS
4.1
248
248
L4
31315870
PERKINS
4.1
248
D(2)
248
L4
31315881
ALLIS CHALMERS
3.9
170 & 175
236
L4
31315881
PERKINS
3.9
236
236
L4
31315881
PERKINS
3.9
236
236
L4
31315881
PERKINS
3.9
236
D(1)
236
L4
31315881
PERKINS
3.9
236
236
L4
546
VIN

Casting
Manufacturer
Liter
Model
VIN
31315881
PERKINS
4.1
248
248
L4
31315881
PERKINS
4.1
248
D(2)
248
L4
31315881
WHITE
3.9
240A
240
31315952
MASSEY FERGUSON
5.2
4.318
318
L4
31315952
PERKINS
5.2
318
318
L4
31315961
MAZDA
2.5
154
154
L4
31315961
PERKINS
2.5
154
154
L4
31315962
MAZDA
2.5
154
154
L4
31315962
PERKINS
2.5
154
154
L4
31315963
MAZDA
2.5
154
154
L4
31315963
PERKINS
2.5
154
154
L4
31315971
MASSEY FERGUSON
5.2
4.318
318
L4
31315971
PERKINS
5.2
318
318
L4
31315980
PERKINS
3.9
236
236
L4
31315980
PERKINS
3.9
236
236
L4
31315980
PERKINS
3.9
236
D(1)
236
L4
31315980
PERKINS
3.9
236
236
L4
31315980
PERKINS
4.1
248
248
L4
31315980
PERKINS
4.1
248
D(2)
248
L4
3131599
PERKINS
4.0
1000
243
L4
3131599F
PERKINS
3.9
236
236
L4
31316323
MASSEY FERGUSON
5.2
4.318
318
L4
31316323
PERKINS
5.2
318
318
L4
31316324
MASSEY FERGUSON
5.2
4.318
318
L4
31316324
PERKINS
5.2
318
318
L4
31316325
MASSEY FERGUSON
5.2
4.318
318
L4
31316325
PERKINS
5.2
318
318
L4
31316351
MAZDA
2.5
154
154
L4
31316351
PERKINS
2.5
154
154
L4
31316353
MAZDA
2.5
154
154
L4
31316353
PERKINS
2.5
154
154
L4
31318352
MAZDA
2.5
154
154
L4
31318352
PERKINS
2.5
154
154
L4
31322302
NAVISTAR
5.8
No Model
354
L6
31322302
OLIVER
5.8
1850
354
L6
31322302
PERKINS
5.8
354
354
L6
31322302
PERKINS
5.8
354.1
354
L6
31322302
PERKINS
5.8
3543
354
L6
31322302
PERKINS
5.8
3544
354
L6
31322302
PERKINS
5.8
3544
354
L6
31322302
WHITE
5.8
2-85
354
L6
31322317
PERKINS
5.8
354.2
354
L6
31322321
PERKINS
5.8
354.2
354
L6
31322322
PERKINS
5.8
354.2
354
L6
31322351
PERKINS
5.8
354.2
354
L6
31322421
PERKINS
5.8
354.2
354
L6
31323202
PERKINS
5.8
354.2
354
L6
31323207
PERKINS
5.8
354.2
354
L6
31323251
PERKINS
5.8
354.2
354
L6
31323253
PERKINS
5.0
305
305
L6
31323301
NAVISTAR
5.8
No Model
354
L6
31323301
OLIVER
5.8
1850
354
L6
31323301
PERKINS
5.8
354
354
L6
31323301
PERKINS
5.8
354.1
354
L6
31323301
PERKINS
5.8
3543
354
L6
31323301
PERKINS
5.8
3544
354
L6
31323301
PERKINS
5.8
3544
354
L6
31325016
PERKINS
5.8
354.2
354
L6
31325019
PERKINS
5.8
354.2
354
L6
547
CID Cyl
Year
88-96

Casting
Manufacturer
Liter
Model
31325022
PERKINS
5.8
354.2
354
L6
31325023
PERKINS
5.8
354.2
354
L6
31325025
PERKINS
5.8
354.2
354
L6
31325028
PERKINS
5.8
354.2
354
L6
31325036
PERKINS
5.8
354.2
354
L6
31325042
PERKINS
5.8
354.2
354
L6
31325123
PERKINS
5.0
305
305
L6
3132752R3
NAVISTAR
3.9
544
D239
239
L4
3132752R3
NAVISTAR
4.0
784
D-246
246
L4
313295632
NAVISTAR
2.9
454
179
L3
3132956R
NAVISTAR
2.9
454
179
L3
3132956R3
NAVISTAR
2.9
454
179
L3
3132968R93
NAVISTAR
3.4
584
D206
206
L4
3136036R95
NAVISTAR
5.8
826
358
L6
3141
NISSAN
2.4
240Z
L24
146
L6
70-73
3141
NISSAN
2.4
720 PICKUP
Z24
146
L4
83-89
3144388
CHRYSLER
4.1
No Model
A/J
250
V8
56-61
3144388
CHRYSLER
4.7
No Model
A/J
287
V8
63-66
3144388
CHRYSLER
5.4
RAMBLER
A/J
327
V8
57-67
3144388
HUDSON
4.1
No Model
250
L6
56
3144388
HUDSON
5.4
No Model
327
L8
57
3144388
JEEP
5.4
No Model
327
V8
65-68
3144388
PACKARD
5.2
No Model
320
L8
55
3144388
PACKARD
5.8
No Model
352
V8
55-56
3144388
PACKARD
6.1
No Model
374
L8
51-56
3144388
STUDEBAKER
5.7
No Model
352
V8
56-59
315+Y
SIMCA
0.9
No Model
58
L4
67
315+Y
SIMCA
1.1
No Model
66
L4
60-65
3151RA015005
DEUTZ
5.6
BF6L912
343
L6
3151RA015005
DEUTZ
5.6
BF6L912W
343
L6
315703
PACKARD
3.9
No Model
237
L6
37
315703
PACKARD
4.0
No Model
245
L6
39-48
315712R
NAVISTAR
4.8
666, 706, 766
291
L6
315712R3
NAVISTAR
4.3
400
264
L6
63-74
315712R3
NAVISTAR
4.6
UTD282
282
L6
53-70
315712R3
NAVISTAR
4.8
666, 706, 766
291
L6
3159292
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
3159614F
CHRYSLER
3.2
No Model
A/J
196
L6
53-65
3160035
CHRYSLER
3.8
No Model
A/J
232
L6
64-79
3169034
CHRYSLER
3.8
No Model
A/J
232
L6
64-79
3169034F
CHRYSLER
3.2
No Model
A/J
196
L6
53-65
31700332
GM
5.0
No Model
GMC
302
L6
50-57
3172216
CHRYSLER
3.3
No Model
A/J
199
L6
65-70
3172216
JEEP
3.8
No Model
230
L6
62-65
3172216
NAVISTAR
3.8
No Model
232
L6
68-74
3172218
CHRYSLER
3.8
No Model
232
L6
64-79
3172218
NAVISTAR
3.8
No Model
232
L6
68-74
3172218R
CHRYSLER
3.8
No Model
232
L6
64-79
3172218R
JEEP
3.8
No Model
230
L6
62-65
3172218R
NAVISTAR
3.8
No Model
232
L6
68-74
3173429
CHRYSLER
3.3
No Model
A/J
199
L6
65-70
3174294
CHRYSLER
3.2
No Model
A/J
196
L6
53-65
3178451
CHRYSLER
5.6
No Model
A/J 1
343
V8
67-69
3178451C
CHRYSLER
5.6
No Model
A/J 1
343
V8
67-69
3178461
CHRYSLER
5.6
No Model
A/J 1
343
V8
67-69
318175R11
NAVISTAR
9.1
TD18
554
L6
318175R11
NAVISTAR
9.6
TD20
585
L6
318264R
NAVISTAR
3.0
504
188
L4
318264R1
NAVISTAR
2.7
340
166
L4
548
VIN
A/J
A/J
CID Cyl
Year

Casting
Manufacturer
Liter
Model
318264R1
NAVISTAR
2.7
No Model
164
L4
318264R1
NAVISTAR
3.0
504
188
L4
31-87
CHRYSLER
1.8
COLT
107
L4
93-94
31-87
CHRYSLER
1.8
COLT
107
L4
89-93
31-87
MITSUBISHI
1.8
ECLIPSE
107
L4
93-94
31875R11
NAVISTAR
9.1
TD18
554
L6
31875R11
NAVISTAR
9.6
TD20
585
L6
3188945
CHRYSLER
3.3
No Model
199
L6
65-70
3188946
NAVISTAR
3.8
No Model
232
L6
68-74
3188947
CHRYSLER
3.8
No Model
232
L6
64-79
3188947
JEEP
3.8
No Model
230
L6
62-65
3190079
CHRYSLER
6.6
No Model
401
V8
71-78
3190079
JEEP
6.6
No Model
401
V8
74-78
3190079
JEEP
6.6
No Model
401
V8
74-78
3190079
NAVISTAR
6.6
No Model
AMC
401
V8
75-84
3190792
CHRYSLER
6.4
No Model
A/J
390
V8
68-76
3190793
CHRYSLER
6.4
No Model
A/J
390
V8
68-76
3190797
CHRYSLER
6.4
No Model
A/J
390
V8
68-76
3190798
CHRYSLER
6.4
No Model
A/J
390
V8
68-76
3193816
CHRYSLER
5.6
No Model
A/J 1
343
V8
67-69
3195292
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
3195292
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
3195292
JEEP
5.0
No Model
304
V8
70-79
3195292
JEEP
5.9
No Model
360
V8
71-91
3196921
CHRYSLER
6.6
No Model
401
V8
71-78
3196921
JEEP
6.6
No Model
401
V8
74-78
3196922
CHRYSLER
6.6
No Model
401
V8
71-78
3196922
JEEP
6.6
No Model
401
V8
74-78
3199738C
CHRYSLER
4.2
No Model
258
L6
70-83
3199738C
CHRYSLER
4.2
No Model
258
L6
83-89
3199738C
CHRYSLER
4.2
No Model
C(2
258
L6
83-89
3199738C
JEEP
4.2
No Model
258
L6
71-77
3199798
CHRYSLER
4.2
No Model
258
L6
70-83
3199798
JEEP
4.2
No Model
258
L6
71-77
3199824
JEEP
6.6
No Model
401
V8
74-78
3199842
CHRYSLER
6.6
No Model
401
V8
71-78
3199842
JEEP
6.6
No Model
401
V8
74-78
3199842
JEEP
6.6
No Model
401
V8
74-78
3199842
NAVISTAR
6.6
No Model
AMC
401
V8
75-84
31M
NISSAN
1.6
No Model
E16I
97
L4
86-88
31M
NISSAN
1.6
No Model
E16S
97
L4
86-88
31M
NISSAN
1.6
PULSAR
E16
97
L4
83-86
320185
NAVISTAR
4.6
560
282
L6
320185R
NAVISTAR
4.8
666, 706, 766
291
L6
320185R1
NAVISTAR
4.3
400
264
L6
63-74
320185R1
NAVISTAR
4.6
UTD282
282
L6
53-70
320185R1
NAVISTAR
4.8
666, 706, 766
291
L6
320428
PACKARD
4.6
No Model
282
L8
35-47
320428
STUDEBAKER
4.6
No Model
282
L8
39-47
3204904
CHRYSLER
3.8
No Model
232
L6
64-79
3204904
JEEP
3.8
No Model
230
L6
62-65
3204904
NAVISTAR
3.8
No Model
232
L6
68-74
3208626
CHRYSLER
3.3
No Model
A/J
199
L6
65-70
3208627
CHRYSLER
3.8
No Model
A/J
232
L6
64-79
3208627
JEEP
3.8
No Model
230
L6
62-65
3208794
CHRYSLER
3.8
No Model
232
L6
64-79
3208794
JEEP
3.8
No Model
230
L6
62-65
3208795
CHRYSLER
6.4
No Model
A/J
390
V8
68-76
321
ACURA
1.6
INTEGRA
D16A1
97
L4
86-89
549
VIN
A/J
A/J
A/J
A/J
A/J
A/J
A/J
A/J
CID Cyl
Year

Casting
Manufacturer
Liter
Model
32101082
CUMMINS
18.8
K SERIES
1150
L6
3213754
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
3213754
CHRYSLER
5.9
GRAND WAGONEER
360
V8
89-91
3213754
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
3213754
CHRYSLER
5.9
No Model
360
V8
83-88
3213754
JEEP
5.0
No Model
304
V8
70-79
3213754
JEEP
5.9
No Model
360
V8
71-91
32138754
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
321472
CHRYSLER
6.6
No Model
A/J
401
V8
71-78
321472
JEEP
6.6
No Model
401
V8
74-78
321472
JEEP
6.6
No Model
401
V8
74-78
3214722
CHRYSLER
3.8
No Model
232
L6
64-79
3214722
JEEP
3.8
No Model
230
L6
62-65
3214723
CHRYSLER
4.2
No Model
258
L6
70-83
3214723
CHRYSLER
4.2
No Model
258
L6
83-89
3214723
CHRYSLER
4.2
No Model
C(2
258
L6
83-89
3214723
JEEP
4.2
No Model
258
L6
71-77
3214724
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
3214724
CHRYSLER
5.9
GRAND WAGONEER
360
V8
89-91
3214724
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
3214724
CHRYSLER
5.9
No Model
360
V8
83-88
3214724
JEEP
5.0
No Model
304
V8
70-79
3214724
JEEP
5.9
No Model
360
V8
71-91
3214725
CHRYSLER
6.6
No Model
401
V8
71-78
3214725
JEEP
6.6
No Model
401
V8
74-78
3214725
JEEP
6.6
No Model
401
V8
74-78
3214725
NAVISTAR
6.6
No Model
AMC
401
V8
75-84
3220411
CHRYSLER
6.6
No Model
A/J
401
V8
71-78
3220411
JEEP
6.6
No Model
401
V8
74-78
3220411
JEEP
6.6
No Model
401
V8
74-78
3220411
NAVISTAR
6.6
No Model
401
V8
75-84
32288D
NAVISTAR
11.3
No Model
691
L6
32288DB
NAVISTAR
11.3
No Model
691
L6
32305
NAVISTAR
11.3
No Model
691
L6
3235477
CHRYSLER
4.2
No Model
258
L6
70-83
3235477
CHRYSLER
4.2
No Model
258
L6
83-89
3235477
CHRYSLER
4.2
No Model
C(2
258
L6
83-89
3235477
CHRYSLER
4.2
No Model
258
L6
90
3237
CHRYSLER
4.2
No Model
258
L6
90
323882R
NAVISTAR
5.9
806
361
L6
60-72
323882R1
NAVISTAR
5.9
806
361
L6
60-72
323882R11
NAVISTAR
4.3
400
264
L6
63-74
323882R11
NAVISTAR
4.6
UTD282
282
L6
53-70
323882R11
NAVISTAR
4.8
666, 706, 766
291
L6
323882R2
NAVISTAR
5.9
806
361
L6
60-72
3239611
CHRYSLER
2.5
DAKOTA
150
L4
91-02
3239611
CHRYSLER
2.5
No Model
150
L4
89-93
3239611
CHRYSLER
2.5
No Model
150
L4
86-88
3239611
CHRYSLER
2.5
No Model
150
L4
84-86
3278N
GM
2.0
No Model
122
L4
82-86
3278N
GM
2.0
No Model
121
L4
82-86
3278N
GM
2.0
S-10
121
L4
82-84
3279
GM
5.0
Z-28
302
302
V8
67-69
3281N
GM
2.0
No Model
122
L4
82-86
3281N
GM
2.0
No Model
121
L4
82-86
32889R2
NAVISTAR
3.4
584
D206
206
L4
329880N
GM
4.8
No Model
292
L6
63-73
329880N
GM
4.8
No Model
292
L6
74-77
329880N
GM
4.8
No Model
292
L6
78-90
550
VIN
A/J
A/J
AMC
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
3299990
GM
4.8
No Model
3299990
GM
4.8
No Model
292
L6
63-73
292
L6
3299990
GM
4.8
No Model
74-77
292
L6
32T
MITSUBISHI
6.7
6D142A
78-90
406
L6
33002904
CHRYSLER
2.5
DAKOTA
75-89
150
L4
33002904
CHRYSLER
2.5
91-02
No Model
150
L4
33002904
CHRYSLER
89-93
2.5
No Model
150
L4
33002904
86-88
CHRYSLER
2.5
No Model
150
L4
84-86
33020
HUDSON
4.2
No Model
254
L8
32-52
3325009
HUDSON
4.3
No Model
262
L6
48-52
332882
NAVISTAR
5.9
806
361
L6
60-72
334
GM
3.1
LUMINA
191
V6
90-95
34118640
CHRYSLER
5.9
GRAND WAGONEER
360
V8
89-91
3418640
CHRYSLER
5.9
DURANGO
360
V8
98-02
3418640
CHRYSLER
5.9
MAGNUM
360
V8
92-01
3418640
CHRYSLER
5.9
MAGNUM
360
V8
92-97
3418640
CHRYSLER
5.9
No Model
360
V8
89-91
3418640
CHRYSLER
5.9
No Model
360
V8
77-79
3418640
CHRYSLER
5.9
No Model
360
V8
80
3418640
CHRYSLER
5.9
No Model
360
V8
83-87
3418640
CHRYSLER
5.9
No Model
360
V8
71-75
3418640
CHRYSLER
5.9
No Model
360
V8
76-79
3418640
CHRYSLER
5.9
No Model
360
V8
74-76
3418640
CHRYSLER
5.9
No Model
360
V8
77-79
3418640
CHRYSLER
5.9
No Model
360
V8
80
3418640
CHRYSLER
5.9
No Model
360
V8
73-75
3418640
CHRYSLER
5.9
No Model
360
V8
76-78
3418640
CHRYSLER
5.9
No Model
360
V8
79
3418640
CHRYSLER
5.9
No Model
360
V8
80
3418640
CHRYSLER
5.9
No Model
360
V8
80-82
3418640
CHRYSLER
5.9
No Model
360
V8
77-79
3418640
CHRYSLER
5.9
No Model
360
V8
80-82
3418640
CHRYSLER
5.9
No Model
360
V8
81-82
3418640
CHRYSLER
5.9
No Model
360
V8
81
3418640
CHRYSLER
5.9
No Model
360
V8
82
3418640
CHRYSLER
5.9
No Model
360
V8
83-88
3418640
CHRYSLER
5.9
No Model
360
V8
89-91
3418840
CHRYSLER
5.9
No Model
360
V8
89-91
3418840
CHRYSLER
5.9
No Model
360
V8
77-79
3418840
CHRYSLER
5.9
No Model
360
V8
80
3418840
CHRYSLER
5.9
No Model
360
V8
83-87
3418840
CHRYSLER
5.9
No Model
360
V8
71-75
3418840
CHRYSLER
5.9
No Model
360
V8
76-79
3418840
CHRYSLER
5.9
No Model
360
V8
74-76
3418840
CHRYSLER
5.9
No Model
360
V8
77-79
3418840
CHRYSLER
5.9
No Model
360
V8
80
3418840
CHRYSLER
5.9
No Model
360
V8
73-75
3418840
CHRYSLER
5.9
No Model
360
V8
76-78
3418840
CHRYSLER
5.9
No Model
360
V8
79
3418840
CHRYSLER
5.9
No Model
360
V8
80
3418840
CHRYSLER
5.9
No Model
360
V8
80-82
3418840
CHRYSLER
5.9
No Model
360
V8
77-79
3418840
CHRYSLER
5.9
No Model
360
V8
80-82
3418840
CHRYSLER
5.9
No Model
360
V8
81-82
3418840
CHRYSLER
5.9
No Model
360
V8
81
3418840
CHRYSLER
5.9
No Model
360
V8
82
3418840
CHRYSLER
5.9
No Model
360
V8
83-88
3418840
CHRYSLER
5.9
No Model
360
V8
89-91
3418995
CHRYSLER
5.9
No Model
360
V8
89-91
551
VIN

Casting
Manufacturer
Liter
Model
CID Cyl
Year
3418995
CHRYSLER
5.9
No Model
3418995
CHRYSLER
5.9
No Model
360
V8
77-79
360
V8
3418995
CHRYSLER
5.9
No Model
80
360
V8
83-87
3418995
CHRYSLER
5.9
3418995
CHRYSLER
5.9
No Model
360
V8
71-75
No Model
360
V8
3418995
CHRYSLER
76-79
5.9
No Model
360
V8
3418995
74-76
CHRYSLER
5.9
No Model
360
V8
77-79
3418995
CHRYSLER
5.9
No Model
360
V8
80
3418995
CHRYSLER
5.9
No Model
360
V8
73-75
3418995
CHRYSLER
5.9
No Model
360
V8
76-78
3418995
CHRYSLER
5.9
No Model
360
V8
79
3418995
CHRYSLER
5.9
No Model
360
V8
80
3418995
CHRYSLER
5.9
No Model
360
V8
80-82
3418995
CHRYSLER
5.9
No Model
360
V8
77-79
3418995
CHRYSLER
5.9
No Model
360
V8
80-82
3418995
CHRYSLER
5.9
No Model
360
V8
81-82
3418995
CHRYSLER
5.9
No Model
360
V8
81
3418995
CHRYSLER
5.9
No Model
360
V8
82
3418995
CHRYSLER
5.9
No Model
360
V8
83-88
3418995
CHRYSLER
5.9
No Model
360
V8
89-91
342640
WHITE
4.1
No Model
252
L6
342640
WHITE
4.4
270
270
342640
WHITE
4.9
No Model
300
L6
342640
WHITE
5.2
120A
318
L6
342640
WHITE
5.5
No Model
336
L6
342649
WHITE
4.1
No Model
252
L6
342649
WHITE
4.4
270
270
342649
WHITE
4.9
No Model
300
L6
342649
WHITE
5.5
No Model
336
L6
3462387
CHRYSLER
4.5
No Model
273
V8
62-69
3462387
CHRYSLER
5.0
FURY
303
V8
56-58
3462387
CHRYSLER
5.2
DAKOTA
318
V8
88-91
3462387
CHRYSLER
5.2
DAKOTA
318
V8
92-04
3462387
CHRYSLER
5.2
No Model
318
V8
98-99
3462387
CHRYSLER
5.2
No Model
318
V8
83-89
3462387
CHRYSLER
5.2
No Model
318
V8
77-80
3462387
CHRYSLER
5.2
No Model
318
V8
69-76
3462387
CHRYSLER
5.2
No Model
318
V8
77-79
3462387
CHRYSLER
5.2
No Model
318
V8
78-80
3462387
CHRYSLER
5.2
No Model
318
V8
81-82
3462387
CHRYSLER
5.2
No Model
318
V8
81-82
3462387
CHRYSLER
5.2
No Model
318
V8
81-82
3462387
CHRYSLER
5.2
No Model
318
V8
81-82
3462387
CHRYSLER
5.2
No Model
318
V8
81-82
3462387
CHRYSLER
5.2
No Model
318
V8
81-82
3462387
CHRYSLER
5.2
No Model
318
V8
83-89
3462387
CHRYSLER
5.2
No Model
318
V8
83-84
3462387
CHRYSLER
5.3
No Model
326
V8
55-57
3462387
CHRYSLER
5.6
No Model
340
V8
68-73
3462923
CHRYSLER
5.2
DAKOTA
318
V8
88-91
3462923
CHRYSLER
5.2
No Model
318
V8
73-76
3462923
CHRYSLER
5.2
No Model
318
V8
77-80
3462923
CHRYSLER
5.2
No Model
318
V8
69-76
3462923
CHRYSLER
5.2
No Model
318
V8
77-79
3462923
CHRYSLER
5.2
No Model
318
V8
80
3462923
CHRYSLER
5.2
No Model
318
V8
78-80
3462923
CHRYSLER
5.2
No Model
318
V8
81-82
3462923
CHRYSLER
5.2
No Model
318
V8
81-82
3462923
CHRYSLER
5.2
No Model
318
V8
81-82
552
VIN
273

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
3462923
CHRYSLER
5.2
No Model
3462923
CHRYSLER
5.2
No Model
318
V8
81-82
318
V8
3462923
CHRYSLER
5.2
No Model
81-85
318
V8
3462923
CHRYSLER
5.2
81-82
No Model
318
V8
3462923
CHRYSLER
83-91
5.2
No Model
318
V8
3462923
81-82
CHRYSLER
5.2
No Model
318
V8
83-87
3462923
CHRYSLER
5.2
No Model
318
V8
83-89
3462923
CHRYSLER
5.2
No Model
318
V8
83-87
3462923
CHRYSLER
5.2
No Model
318
V8
83-84
3462923
CHRYSLER
5.2
No Model
318
V8
62-67
3462923
CHRYSLER
5.9
No Model
361
V8
80-81
3462923
CHRYSLER
5.9
No Model
361
V8
57-78
3462923
CHRYSLER
6.3
No Model
383
V8
59-71
3462923
CHRYSLER
6.6
No Model
400
V8
75-76
3462923
CHRYSLER
6.6
No Model
400
V8
72-78
3462923
CHRYSLER
6.6
No Model
400
V8
74-78
3482387
CHRYSLER
4.5
No Model
273
273
V8
62-69
3482387
CHRYSLER
5.0
FURY
303
V8
56-58
3482387
CHRYSLER
5.1
No Model
313
V8
57-66
3482387
CHRYSLER
5.3
No Model
326
V8
55-57
3482387
CHRYSLER
5.6
No Model
340
V8
68-73
349344R1
NAVISTAR
7.0
TD20
DT
429
L6
3509574
GM
5.4
No Model
CAD
331
V8
351264R1
NAVISTAR
1.0
U & UC
60
L4
3520
GM
7.4
No Model
454
V8
75-76
3520090
GM
4.9
No Model
300
V8
91-95
3521
GM
6.0
No Model
366
V8
68-90
3521
GM
6.5
No Model
396
V8
65-72
3521
GM
7.0
No Model
427
V8
66-90
3521
GM
7.4
No Model
454
V8
75-76
3521
GM
7.4
No Model
454
V8
87-90
3521
GM
7.4
No Model
454
V8
76-79
3521
GM
7.4
No Model
454
V8
80-81
3521
GM
7.4
No Model
454
V8
80-86
3521
GM
7.4
No Model
454
V8
87-90
3521
GM
7.4
No Model
454
V8
76-78
3521
GM
7.4
No Model
454
V8
70-75
3525744
GM
4.6
NORTHSTAR
279
V8
93-03
3525774
GM
4.0
AURORA
244
V8
95-01
3525774
GM
4.6
NORTHSTAR
279
V8
93-03
3528401
MERCEDES BENZ
5.7
OM352A
346
L6
353039
GM
7.4
No Model
454
V8
96-00
353039
GM
7.4
No Model
454
V8
75-76
353039
GM
7.4
No Model
454
V8
87-90
353039
GM
7.4
No Model
454
V8
76-79
353039
GM
7.4
No Model
454
V8
80-81
353039
GM
7.4
No Model
454
V8
80-86
353039
GM
7.4
No Model
454
V8
76-78
353039
GM
7.4
No Model
454
V8
70-75
35311
WAUKESHA
0.0
6MKR
L6
353-5000
LISTER
3.2
HR3
192
L3
353-5000
LISTER
4.2
HR4
256
L4
354431
GM
4.3
No Model
262
V8
75-76
3544669
GM
4.0
AURORA
244
V8
95-01
3544669
GM
4.6
NORTHSTAR
279
V8
93-03
3544669
GM
4.6
NORTHSTAR
279
V8
93-03
356308
NAVISTAR
1.9
No Model
113
L4
37-40
356308
NAVISTAR
2.0
SUPER C
123
L4
356308
NAVISTAR
4.6
450
281
L4
TRK
553
49-55

Casting
Manufacturer
Liter
Model
VIN
356308
NAVISTAR
4.6
450
281
L4
356308R
NAVISTAR
2.0
SUPER C
123
L4
356308R1
NAVISTAR
1.9
No Model
113
L4
356308R1
NAVISTAR
2.0
SUPER C
123
L4
356308R1
NAVISTAR
2.0
SUPER C
123
L4
356308R1
NAVISTAR
2.2
F-12
132
L4
357247
NAVISTAR
1.0
U & UC
60
L4
357247R1
NAVISTAR
1.0
U & UC
60
L4
357264
NAVISTAR
1.0
U & UC
60
L4
358011
HUDSON
3.8
No Model
232
L6
50-54
359730
GM
7.4
No Model
454
V8
75-76
359730
GM
7.4
No Model
454
V8
87-90
359730
GM
7.4
No Model
454
V8
76-79
359730
GM
7.4
No Model
454
V8
80-81
359730
GM
7.4
No Model
454
V8
80-86
359730
GM
7.4
No Model
454
V8
87-90
359730
GM
7.4
No Model
454
V8
76-78
359730
GM
7.4
No Model
454
V8
70-75
360
NISSAN
1.3
No Model
A13
79
L4
74
3608833
CUMMINS
14.0
88NT
FFC
855
L6
87-89
3608833
CUMMINS
14.0
NT SERIES
315
855
L6
88-93
361947
LEYLAND
3.4
4-272
207
L4
362034
PACKARD
5.8
No Model
356
L8
40-50
362043
PACKARD
5.8
No Model
352
V8
55-56
365308R1
NAVISTAR
1.9
No Model
113
L4
37-40
365308R1
NAVISTAR
2.0
SUPER C
123
L4
365308R1
NAVISTAR
2.2
F-12
FL
132
L4
3654
CHRYSLER
3.3
CARAVAN
201
V6
98-01
3654
CHRYSLER
3.3
CONCORDE
201
V6
93-97
3654
CHRYSLER
3.3
No Model
201
V6
94-98
3654
CHRYSLER
3.3
No Model
201
V6
94-97
3654
CHRYSLER
3.3
TOWN & COUNTRY
201
V6
90-02
365712R2
NAVISTAR
2.5
No Model
152
L4
61-68
365712R2
NAVISTAR
4.1
248
L4
61-68
367266
NAVISTAR
3.8
460
236
L6
367266R1
NAVISTAR
3.8
460
236
L6
367267R
NAVISTAR
4.8
666, 706, 766
291
L6
367267R1
NAVISTAR
4.3
400
264
L6
63-74
367267R1
NAVISTAR
4.6
UTD282
282
L6
53-70
367267R1
NAVISTAR
4.8
666, 706, 766
291
L6
367747R
NAVISTAR
2.2
2404
C(2)
135
L4
367747R1
NAVISTAR
2.2
2404
C(2)
135
L4
367747R1
NAVISTAR
2.2
F-12
FL
132
L4
367747R1
NAVISTAR
2.3
B275
3680962
CUMMINS
15.0
368711R
NAVISTAR
368711R1
368711R1
D281
FL
CID Cyl
Year
37-40
144
L4
600 SERIES
912
2.0
SUPER C
123
L4
NAVISTAR
1.9
No Model
113
L4
NAVISTAR
2.0
SUPER C
123
L4
368711R1
NAVISTAR
2.2
F-12
FL
132
L4
3690
CHRYSLER
3.8
No Model
231
V6
91-00
3698481
CHRYSLER
7.2
No Model
440
V8
76-76
3698641
CHRYSLER
7.2
No Model
440
V8
66-73
3698966
CHRYSLER
3.7
No Model
225
L6
76-87
3698966
CHRYSLER
3.7
No Model
225
L6
69-80
3698966
CHRYSLER
3.7
No Model
225
L6
77-80
3698966
CHRYSLER
3.7
No Model
225
L6
81-82
3698966
CHRYSLER
3.7
No Model
225
L6
81-82
3701486
GM
4.2
No Model
261
L6
54-62
3701488
GM
3.9
No Model
235
L6
49-62
554
97-05
37-40

Casting
Manufacturer
Liter
Model
3701488
GM
4.2
No Model
3701488A
GM
3.9
No Model
3701488A
GM
4.2
3701894
GM
3701894
CID Cyl
Year
261
L6
54-62
235
L6
49-62
No Model
261
L6
54-62
3.9
No Model
235
L6
49-62
GM
4.2
No Model
261
L6
54-62
3726271
GM
3.5
No Model
216
L6
37-52
3726271
GM
3.7
No Model
224
L6
40-47
3727
CHRYSLER
4.2
No Model
258
L6
83-89
3727
CHRYSLER
4.2
No Model
258
L6
83-89
3727
CHRYSLER
4.2
No Model
C(2
258
L6
83-89
3727
CHRYSLER
4.2
No Model
258
L6
90
3727449
GM
4.3
No Model
(1)
265
V8
55-57
3727449
GM
4.6
No Model
283
V8
56-67
3727449
STUDEBAKER
4.6
No Model
282
L8
39-47
3727499
GM
4.3
No Model
265
V8
55-57
3727499
GM
4.6
No Model
283
V8
56-67
3729449
GM
4.3
No Model
265
V8
55-57
3729449
GM
4.6
No Model
283
V8
56-67
3729499
GM
4.6
No Model
283
V8
56-67
3732444
GM
5.7
No Model
350
V8
78-79
3732444
GM
5.7
No Model
350
V8
77-82
3732444
GM
5.7
No Model
350
V8
83-86
3732444
GM
5.7
No Model
350
V8
74-76
3732444
GM
5.7
No Model
350
V8
68-75
3733223
GM
5.7
No Model
348
V8
58-65
3733226
GM
5.7
No Model
348
V8
58-65
3734627
GM
4.6
No Model
283
V8
56-67
3734627
STUDEBAKER
4.6
No Model
282
L8
39-47
3735236
GM
4.3
No Model
265
V8
55-57
3735236
GM
4.6
No Model
283
V8
56-67
3741640
GM
5.7
No Model
348
V8
58-65
3741642
GM
5.7
No Model
348
V8
58-65
3751142
CHRYSLER
3.7
No Model
225
L6
80
375184
CHRYSLER
5.2
DAKOTA
318
V8
92-04
375184
CHRYSLER
5.2
MAGNUM
318
V8
95-99
375184
CHRYSLER
5.2
No Model
318
V8
98-99
3751841
CHRYSLER
4.5
No Model
273
273
V8
62-69
3751841
CHRYSLER
5.0
FURY
303
V8
56-58
3751841
CHRYSLER
5.1
No Model
313
V8
57-66
3751841
CHRYSLER
5.2
DAKOTA
318
V8
88-91
3751841
CHRYSLER
5.2
DAKOTA
318
V8
92-04
3751841
CHRYSLER
5.2
No Model
318
V8
98-99
3751841
CHRYSLER
5.2
No Model
318
V8
83-89
3751841
CHRYSLER
5.2
No Model
318
V8
77-80
3751841
CHRYSLER
5.2
No Model
318
V8
69-76
3751841
CHRYSLER
5.2
No Model
318
V8
78-80
3751841
CHRYSLER
5.2
No Model
318
V8
81-82
3751841
CHRYSLER
5.2
No Model
318
V8
81-82
3751841
CHRYSLER
5.2
No Model
318
V8
81-82
3751841
CHRYSLER
5.2
No Model
318
V8
81-82
3751841
CHRYSLER
5.2
No Model
318
V8
81-85
3751841
CHRYSLER
5.2
No Model
318
V8
81-82
3751841
CHRYSLER
5.2
No Model
318
V8
81-82
3751841
CHRYSLER
5.2
No Model
318
V8
83-89
3751841
CHRYSLER
5.2
No Model
318
V8
83-84
3751841
CHRYSLER
5.3
No Model
326
V8
55-57
3751841
CHRYSLER
5.6
No Model
340
V8
68-73
3751874
CHRYSLER
5.2
No Model
318
V8
77-79
3751877
CHRYSLER
5.2
DAKOTA
318
V8
88-91
555
VIN
(1)
(1)
(1)

Casting
Manufacturer
Liter
Model
CID Cyl
Year
3751877
CHRYSLER
5.2
No Model
3751877
CHRYSLER
5.2
No Model
318
V8
73-76
318
V8
3751877
CHRYSLER
5.2
No Model
77-80
318
V8
3751877
CHRYSLER
5.2
69-76
No Model
318
V8
3751877
CHRYSLER
77-79
5.2
No Model
318
V8
3751877
80
CHRYSLER
5.2
No Model
318
V8
78-80
3751877
CHRYSLER
5.2
No Model
318
V8
81-82
3751877
CHRYSLER
5.2
No Model
318
V8
81-82
3751877
CHRYSLER
5.2
No Model
318
V8
81-82
3751877
CHRYSLER
5.2
No Model
318
V8
81-82
3751877
CHRYSLER
5.2
No Model
318
V8
81-85
3751877
CHRYSLER
5.2
No Model
318
V8
81-82
3751877
CHRYSLER
5.2
No Model
318
V8
83-91
3751877
CHRYSLER
5.2
No Model
318
V8
81-82
3751877
CHRYSLER
5.2
No Model
318
V8
83-87
3751877
CHRYSLER
5.2
No Model
318
V8
83-89
3751877
CHRYSLER
5.2
No Model
318
V8
83-87
3751877
CHRYSLER
5.2
No Model
318
V8
83-84
3751877
CHRYSLER
5.2
No Model
318
V8
62-67
3751877
CHRYSLER
5.9
No Model
361
V8
80-81
3751877
CHRYSLER
5.9
No Model
361
V8
57-78
3751877
CHRYSLER
6.3
No Model
383
V8
59-71
3751877
CHRYSLER
6.6
No Model
400
V8
75-76
3751877
CHRYSLER
6.6
No Model
400
V8
72-78
3751877
CHRYSLER
6.6
No Model
400
V8
74-78
3751880
CHRYSLER
7.2
No Model
440
V8
76-76
3751880
CHRYSLER
7.2
No Model
440
V8
66-73
3751880
CHRYSLER
7.2
No Model
440
V8
74-76
3751887
CHRYSLER
4.5
No Model
273
273
V8
62-69
3751887
CHRYSLER
5.2
DAKOTA
318
V8
88-91
3751887
CHRYSLER
5.2
DAKOTA
318
V8
92-04
3751887
CHRYSLER
5.2
No Model
318
V8
77-80
3751887
CHRYSLER
5.2
No Model
318
V8
69-76
3751887
CHRYSLER
5.2
No Model
318
V8
77-79
3751887
CHRYSLER
5.2
No Model
318
V8
78-80
3751887
CHRYSLER
5.2
No Model
318
V8
81-82
3751887
CHRYSLER
5.2
No Model
318
V8
81-82
3751887
CHRYSLER
5.2
No Model
318
V8
81-82
3751887
CHRYSLER
5.2
No Model
318
V8
81-82
3751887
CHRYSLER
5.2
No Model
318
V8
83-89
3751887
CHRYSLER
5.2
No Model
318
V8
83-84
3751887
CHRYSLER
5.6
No Model
340
V8
68-73
3751888
CHRYSLER
6.8
No Model
413
V8
59-77
3751888
CHRYSLER
7.0
HEMI
426
V8
66-71
3751888
CHRYSLER
7.2
No Model
440
V8
76-76
3751888
CHRYSLER
7.2
No Model
440
V8
66-73
375501R2
NAVISTAR
2.5
2504
153
L4
375600R
NAVISTAR
2.3
2424
146
L4
375600R1
NAVISTAR
2.2
2404
C(2)
135
L4
375600R1
NAVISTAR
2.3
2424
146
L4
375601
NAVISTAR
2.5
2504
153
L4
375601R
NAVISTAR
2.5
2504
153
L4
375601R1
NAVISTAR
2.5
2504
153
L4
375601R11
NAVISTAR
2.7
340
166
L4
375601R11
NAVISTAR
2.7
No Model
164
L4
375601R11
NAVISTAR
3.0
504
188
L4
375841
CHRYSLER
5.2
DAKOTA
318
V8
92-04
375841
CHRYSLER
5.2
No Model
318
V8
98-99
376266
NAVISTAR
3.6
460
221
L6
556
VIN
TRK
HJR

Casting
Manufacturer
Liter
Model
376450
GM
5.0
No Model
3769307
CHRYSLER
3.7
No Model
3769307
CHRYSLER
3.7
No Model
3769307
CHRYSLER
3.7
No Model
3770327
GM
3.9
3770327
GM
3782680
CID Cyl
Year
305
V8
81-87
225
L6
76-87
225
L6
69-80
225
L6
60-80
No Model
235
L6
49-62
4.2
No Model
261
L6
54-62
GM
5.4
No Model
327
V8
62-67
3782690
GM
5.4
No Model
327
V8
62-67
3782692
GM
5.7
No Model
348
V8
58-65
378684R21
NAVISTAR
7.5
TD-14
461
L4
378685R11
NAVISTAR
7.5
TD-14
461
L4
378686R21
NAVISTAR
7.5
TD-14
461
L4
3787072
GM
6.7
No Model
409
V8
59-66
3788072
GM
6.7
No Model
409
V8
59-66
3788423
GM
3.2
No Model
194
L6
62-72
3788423
GM
3.5
TEMPEST
215
L6
64-65
3788423
GM
3.8
No Model
230
L6
65-68
3788423
GM
3.8
No Model
230
L6
63-70
3788424
GM
3.2
No Model
194
L6
62-72
3788424
GM
3.5
TEMPEST
215
L6
64-65
3788424
GM
3.8
No Model
230
L6
65-68
3788424
GM
3.8
No Model
230
L6
63-70
3788424
STUDEBAKER
3.2
No Model
194
L6
65-66
3788424
STUDEBAKER
3.8
No Model
232
V8
51-54
3788428
GM
3.2
No Model
194
L6
62-72
3788428
GM
3.5
TEMPEST
215
L6
64-65
3788428
GM
3.8
No Model
230
L6
65-68
3788428
GM
3.8
No Model
230
L6
63-70
3788522
GM
2.5
No Model
IND
153
L4
62-80
3788522
GM
2.5
No Model
IND
153
L4
62-80
3789412
GM
4.8
No Model
292
L6
63-73
3789412
GM
4.8
No Model
292
L6
74-77
3789412
GM
4.8
No Model
292
L6
78-90
3793080
GM
2.5
No Model
IND
153
L4
62-80
3793080
MERCRUISER
2.5
No Model
IND
153
L4
62-80
3793082
GM
2.5
No Model
IND
153
L4
62-80
3793082
MERCRUISER
2.5
No Model
IND
153
L4
62-80
3795589
GM
6.7
No Model
409
V8
59-66
37CR4
NAVISTAR
3.9
544
D239
239
L4
37CR4
NAVISTAR
3.9
No Model
D-246
246
L4
37CR4
NAVISTAR
4.0
784
D-246
246
L4
3803000
OLIVER
7.8
478
478
L6
3803000
WHITE
7.8
478
478
L6
3804816
GM
6.0
No Model
366
V8
68-90
3804816
GM
6.0
No Model
366
V8
89-90
3804816
GM
6.5
No Model
396
V8
65-72
3804816
GM
7.0
No Model
427
V8
66-90
381
CHRYSLER
2.5
No Model
151
L4
81-83
381
CHRYSLER
2.5
No Model
151
L4
81-83
381
CHRYSLER
3.3
No Model
A/J
199
L6
65-70
381
GM
2.5
No Model
151
L4
82-86
381
GM
2.5
No Model
151
L4
87-88
381
GM
2.5
S-10
151
L4
87-91
3815822
GM
4.6
No Model
283
V8
56-67
3815822
STUDEBAKER
4.6
No Model
282
L8
39-47
3819989
CUMMINS
10.0
L10
611
L6
85-90
3819989
CUMMINS
10.0
L10
91->
611
L6
91-96
3820618
GM
3.2
No Model
194
L6
62-72
3820618
GM
3.5
TEMPEST
215
L6
64-65
557
VIN
F

Casting
Manufacturer
Liter
Model
3820618
GM
3.8
No Model
3820618
STUDEBAKER
3.2
No Model
3820618
STUDEBAKER
3.8
3820618N
STUDEBAKER
3820618N
CID Cyl
Year
230
L6
63-70
194
L6
65-66
No Model
232
V8
51-54
3.2
No Model
194
L6
65-66
STUDEBAKER
3.8
No Model
232
V8
51-54
3823
MAZDA
1.5
No Model
90
L4
70-79
3824544
GM
5.7
No Model
348
V8
58-65
3824553
GM
5.7
No Model
348
V8
58-65
3824554
GM
6.7
No Model
409
V8
59-66
3828409
GM
2.7
CORVAIR
164
H6
64-69
3829027
GM
6.7
No Model
409
V8
59-66
3832442
GM
5.7
No Model
350
V8
78-79
3832442
GM
5.7
No Model
350
V8
80-88
3832442
GM
5.7
No Model
350
V8
77-82
3832442
GM
5.7
No Model
350
V8
83-86
3832442
GM
5.7
No Model
350
V8
74-76
3832442
GM
5.7
No Model
350
V8
68-75
3835236
GM
4.3
No Model
(1)
265
V8
55-57
3835236
GM
4.6
No Model
283
V8
56-67
3835236TG
GM
4.3
No Model
265
V8
55-57
3835236TG
GM
4.6
No Model
283
V8
56-67
3835271
GM
3.5
No Model
216
L6
37-52
3835271
GM
3.7
No Model
224
L6
40-47
3835311
GM
3.9
No Model
235
L6
49-62
3835501
GM
3.9
No Model
235
L6
49-62
3835709
GM
3.9
No Model
235
L6
49-62
3836236
GM
4.3
No Model
265
V8
55-57
3836236
GM
4.6
No Model
283
V8
56-67
3836266
GM
4.3
No Model
265
V8
55-57
3836266
GM
4.6
No Model
283
V8
56-67
3836271
GM
3.7
No Model
224
L6
40-47
3837466
GM
6.7
No Model
409
V8
59-66
3838396
GM
6.7
No Model
409
V8
59-66
3838416
GM
6.7
No Model
409
V8
59-66
384722
GM
7.0
No Model
425
V8
65-67
3849847
GM
4.3
No Model
(1)
265
V8
55-57
3849847
GM
4.6
No Model
283
V8
56-67
385
GM
3.3
No Model
204
V6
89-93
38530
HERCULES
0.9
NXA
57
L2
38530
HERCULES
1.8
IXA, IXB3
113
L4
38530
HERCULES
2.2
IXA, IXB3
133
L4
38530
HERCULES
2.2
IXA, IXB3
133
L4
38534
HERCULES
0.9
NXA
57
L2
38534
HERCULES
1.8
IXA, IXB3
113
L4
38534
HERCULES
2.2
IXA, IXB3
133
L4
38534
HERCULES
2.2
IXA, IXB3
133
L4
3855914
GM
4.8
No Model
292
L6
63-73
3855914
GM
4.8
No Model
292
L6
74-77
3855914
GM
4.8
No Model
292
L6
78-90
3856223
GM
6.0
No Model
366
V8
68-90
3856223
GM
6.0
No Model
366
V8
89-90
3856223
GM
7.0
No Model
427
V8
66-90
3863144
GM
6.0
No Model
366
V8
68-90
3863144
GM
6.0
No Model
366
V8
89-90
3863144
GM
6.5
No Model
396
V8
65-72
3863144
GM
7.0
No Model
427
V8
66-90
3864465
GM
3.2
No Model
194
L6
62-72
3864465
GM
3.5
TEMPEST
215
L6
64-65
3864465
GM
3.8
No Model
230
L6
63-70
558
VIN
L
UA
(1)
(1)
(1)

Casting
Manufacturer
Liter
Model
CID Cyl
Year
3874874
GM
6.0
No Model
3874874
GM
6.0
No Model
366
V8
68-90
366
V8
3874874
GM
6.5
No Model
89-90
396
V8
3874874
GM
7.0
No Model
65-72
427
V8
3875271
GM
3.5
No Model
66-90
216
L6
3875945
GM
7.4
No Model
37-52
454
V8
3875945
GM
7.4
87-90
No Model
454
V8
3876764
GM
87-90
4.3
No Model
(1)
265
V8
3876764
GM
55-57
4.6
No Model
283
V8
3876764
56-67
STUDEBAKER
4.6
No Model
282
L8
39-47
3876768
GM
4.3
No Model
265
V8
55-57
3876768
GM
4.6
No Model
283
V8
56-67
3876802
GM
4.1
FIREBIRD
OHC
250
L6
66-69
3876802
GM
4.1
No Model
250
L6
77-78
3876802
GM
4.1
No Model
250
L6
78-80
3876802
GM
4.1
No Model
250
L6
81-85
3876802
GM
4.1
No Model
250
L6
66-75
3876802
MERCRUISER
4.1
No Model
MIE
250
L6
66-75
3882841
GM
6.6
No Model
400
V8
70-78
3882841
GM
6.6
No Model
400
V8
75-76
3882841
GM
6.6
No Model
400
V8
77-80
3882841
GM
6.6
No Model
400
V8
79-80
3882842
GM
6.0
No Model
366
V8
68-90
3882842
GM
6.5
No Model
396
V8
65-72
3882842
GM
7.0
No Model
427
V8
66-90
3882847
GM
6.0
No Model
366
V8
68-90
3882847
GM
6.5
No Model
396
V8
65-72
3882847
GM
7.0
No Model
427
V8
66-90
3882848
GM
6.0
No Model
366
V8
68-90
3882848
GM
6.5
No Model
396
V8
65-72
3882848
GM
7.0
No Model
427
V8
66-90
3882849
GM
6.0
No Model
366
V8
68-90
3882849
GM
6.5
No Model
396
V8
65-72
3882849
GM
7.0
No Model
427
V8
66-90
3884653
GM
4.8
No Model
292
L6
63-73
3884653
GM
4.8
No Model
292
L6
74-77
3884653
GM
4.8
No Model
292
L6
78-90
3886061
GM
4.8
No Model
292
L6
63-73
3886061
GM
4.8
No Model
292
L6
74-77
3886061
GM
4.8
No Model
292
L6
78-90
3887114
GM
6.0
No Model
366
V8
68-90
3887114
GM
6.5
No Model
396
V8
65-72
3887114
GM
7.0
No Model
427
V8
66-90
3892671
GM
5.7
No Model
350
V8
79-88
389531
PACKARD
4.0
No Model
245
L6
39-48
389604
PACKARD
4.7
No Model
288
L8
48-54
389605
PACKARD
4.7
No Model
288
L8
48-54
389607
PACKARD
4.7
No Model
288
L8
48-54
389608
PACKARD
4.7
No Model
288
L8
48-54
389609
PACKARD
4.7
No Model
288
L8
48-54
3899424
GM
3.2
No Model
194
L6
62-72
390
CHRYSLER
2.5
No Model
151
L4
81-83
390
GM
2.5
No Model
151
L4
87-88
390275
GM
5.7
No Model
350
V8
80
390275
GM
5.7
No Model
350
V8
78-79
390275
GM
5.7
No Model
350
V8
69-76
390275
GM
5.7
No Model
350
V8
77-80
390275
GM
6.6
No Model
403
V8
77-77
390275
GM
6.6
No Model
403
V8
78-79
559
VIN
(1)

Casting
Manufacturer
Liter
Model
CID Cyl
Year
390275
GM
6.6
No Model
390370
GM
7.0
No Model
403
V8
77-81
425
V8
3903827
CASE
3.9
850
65-67
239
L4
3903827
CUMMINS
3.9
85-93
B SERIES
239
L4
3903830
CASE
83-98
3.9
850
239
L4
3904815
85-93
GM
6.0
No Model
366
V8
68-90
3904815
GM
6.0
No Model
366
V8
89-90
3904815
GM
6.5
No Model
396
V8
65-72
3904815
GM
7.0
No Model
427
V8
66-90
3904816
GM
6.0
No Model
366
V8
68-90
39055
SIMCA
1.1
No Model
66
L4
60-65
39055
SIMCA
1.3
No Model
79
L4
60-76
390562
CASE
8.3
6T830
505
L6
85-98
390562
CUMMINS
8.3
C SERIES
505
L6
85-90
390562
CUMMINS
8.3
C SERIES
C(2)
505
L6
91-00
390562
FORD
8.3
FD-1460
505
L6
95-00
3907803
CASE
3.9
850
239
L4
85-93
3907803
CUMMINS
3.9
B SERIES
239
L4
83-98
3907804
CASE
5.9
2096
359
L6
85-93
3907804
CHRYSLER
5.9
No Model
359
L6
89-97
3907804
CHRYSLER
5.9
No Model
359
L6
94-96
3907804
CHRYSLER
5.9
No Model
359
L6
97-98
3907804
CUMMINS
5.9
B SERIES
359
L6
83-98
3907804
FORD
5.9
FD-1060
359
L6
95-00
3910363
GM
4.8
No Model
292
L6
63-73
3910363
GM
4.8
No Model
292
L6
74-77
3910363
GM
4.8
No Model
292
L6
78-90
3911001
GM
5.0
No Model
307
307
V8
68-73
3911001
GM
5.4
No Model
327
V8
68-69
3911001A
GM
5.0
No Model
307
307
V8
68-73
3911001A
GM
5.4
No Model
327
V8
68-69
391101
AUDI
1.5
No Model
XV
90
L4
73-74
391101
AUDI
1.6
No Model
YG
97
L4
75-80
391101
AUDI
1.7
No Model
105
L4
81-83
3911011
GM
5.0
No Model
307
307
V8
68-73
3911011
GM
5.4
No Model
327
V8
68-69
391101A
GM
5.0
No Model
307
307
V8
68-73
391101A
GM
5.4
No Model
327
V8
68-69
3912335
GM
5.7
No Model
350
V8
78-79
3912335
GM
5.7
No Model
350
V8
77-82
3912335
GM
5.7
No Model
350
V8
83-86
3914584
CUMMINS
8.3
C SERIES
505
L6
85-90
3914584
FORD
8.3
FD-1460
505
L6
95-00
3914681
GM
5.0
No Model
307
307
V8
68-73
3914681
GM
5.4
No Model
327
V8
68-69
3917320
CUMMINS
8.3
C SERIES
505
L6
85-90
3917320
CUMMINS
8.3
C SERIES
C(2)
505
L6
91-00
3917320
FORD
8.3
FD-1460
505
L6
95-00
391930C1
NAVISTAR
4.3
No Model
266
V8
66-71
391930C1
NAVISTAR
4.4
U, B, BD
269
L6
40-69
391930C1
NAVISTAR
5.0
304A
304
V8
58-80
391930C1
NAVISTAR
5.0
No Model
308
L6
3930809
GM
5.0
No Model
307
307
V8
68-73
3930809
GM
5.4
No Model
327
V8
68-69
3932442
GM
4.4
No Model
267
V8
79-82
3932442
GM
5.0
No Model
305
V8
82
3932442
GM
5.0
No Model
305
V8
81-87
3932442
GM
5.0
No Model
305
V8
76-79
3932442
GM
5.0
No Model
305
V8
80-81
560
VIN
266

Casting
Manufacturer
Liter
Model
CID Cyl
Year
3932442
GM
5.0
No Model
3932442
GM
5.0
No Model
305
V8
78-88
305
V8
3932442
GM
5.0
No Model
76
305
V8
3932442
GM
5.0
83
No Model
305
V8
77-79
3932442
GM
3932442
GM
5.7
No Model
350
V8
78-79
5.7
No Model
350
V8
3932442
80-88
GM
5.7
No Model
350
V8
70-75
3932442
GM
5.7
No Model
350
V8
76
3932442
GM
5.7
No Model
350
V8
77-82
3932442
GM
5.7
No Model
350
V8
83-86
3932442
GM
5.7
No Model
350
V8
79-88
3932442
GM
5.7
No Model
350
V8
80-83
3932442
GM
5.7
No Model
350
V8
74-76
3932442
GM
5.7
No Model
350
V8
68-75
3932444
GM
5.7
No Model
350
V8
78-79
3932444
GM
5.7
No Model
350
V8
77-82
3932444
GM
5.7
No Model
350
V8
83-86
393654
GM
4.3
No Model
260
V8
77-82
393654
GM
4.3
No Model
260
V8
77-81
393654
GM
5.0
No Model
307
V8
87-90
393654
GM
5.0
No Model
307
V8
81-88
393654
GM
5.7
No Model
350
V8
80
393654
GM
5.7
No Model
350
V8
78-79
393654
GM
5.7
No Model
350
V8
69-76
393654
GM
5.7
No Model
350
V8
77-80
3937752
GM
2.5
No Model
151
L4
78-80
3941172
GM
5.0
No Model
307
307
V8
68-73
3941172
GM
5.4
No Model
327
V8
68-69
3941174
GM
5.0
No Model
307
307
V8
68-73
3941174
GM
5.4
No Model
327
V8
68-69
3941182
GM
5.7
No Model
350
V8
80-88
3941184
GM
5.7
No Model
350
V8
78-79
3941184
GM
5.7
No Model
350
V8
77-82
3941184
GM
5.7
No Model
350
V8
83-86
3942411
GM
6.0
No Model
366
V8
68-90
3942411
GM
7.0
No Model
427
V8
66-90
3951528
GM
6.6
No Model
400
V8
70-78
3951528
GM
6.6
No Model
400
V8
75-76
3951528
GM
6.6
No Model
400
V8
77-80
3951528
GM
6.6
No Model
400
V8
79-80
3951529
GM
6.6
No Model
400
V8
70-78
3951529
GM
6.6
No Model
400
V8
75-76
3951529
GM
6.6
No Model
400
V8
77-80
3951529
GM
6.6
No Model
400
V8
79-80
3955977
GM
3.2
No Model
194
L6
62-72
39572D
HERCULES
0.9
NXA
57
L2
39572-D
HERCULES
1.6
IXF3
95
L4
396021
GM
6.6
No Model
RO
400
V8
68-69
3963523
GM
7.4
No Model
454
V8
75-76
3963523
GM
7.4
No Model
454
V8
87-90
3963523
GM
7.4
No Model
454
V8
76-79
3963523
GM
7.4
No Model
454
V8
80-81
3963523
GM
7.4
No Model
454
V8
80-86
3963523
GM
7.4
No Model
454
V8
87-90
3963523
GM
7.4
No Model
454
V8
76-78
3963523
GM
7.4
No Model
454
V8
70-75
3963524
GM
7.4
No Model
454
V8
75-76
3963524
GM
7.4
No Model
454
V8
87-90
3963524
GM
7.4
No Model
454
V8
87-90
561
VIN

Casting
Manufacturer
Liter
Model
CID Cyl
Year
3963524
GM
7.4
No Model
3967416
GM
7.4
No Model
454
V8
70-75
454
V8
3967463
GM
7.4
No Model
75-76
454
V8
3967463
GM
7.4
75-76
No Model
454
V8
3967463
GM
87-90
7.4
No Model
454
V8
3967463
76-79
GM
7.4
No Model
454
V8
80-81
3967463
GM
7.4
No Model
454
V8
80-86
3967463
GM
7.4
No Model
454
V8
87-90
3967463
GM
7.4
No Model
454
V8
76-78
3967463
GM
7.4
No Model
454
V8
70-75
397303
GM
6.6
No Model
RO
400
V8
68-69
397303
GM
7.5
No Model
455
V8
74-76
397303
GM
7.5
No Model
455
V8
74-76
397303
GM
7.5
No Model
455
V8
74-74
397303
GM
7.5
No Model
455
V8
74-74
397303
GM
7.5
No Model
455
V8
72-75
397363
GM
6.6
No Model
RO
400
V8
65-69
397363
GM
6.6
No Model
RO
400
V8
68-69
397363
GM
7.0
No Model
425
V8
65-67
397363
GM
7.5
No Model
455
V8
68-76
397363
GM
7.5
No Model
455
V8
74-76
397363
GM
7.5
No Model
455
V8
74-76
397363
GM
7.5
No Model
455
V8
74-74
397363
GM
7.5
No Model
455
V8
74-74
397363
GM
7.5
No Model
455
V8
72-75
3975
FORD
2.0
COURIER
122
L4
79-80
3975
FORD
2.0
No Model
122
L4
81-82
3975
MAZDA
2.0
626
FE
122
L4
83-87
3975
MAZDA
2.0
B2000
FE(1)
122
L4
83-88
3975945
GM
7.4
No Model
454
V8
75-76
3975945
GM
7.4
No Model
454
V8
87-90
3975945
GM
7.4
No Model
454
V8
87-90
3975945
GM
7.4
No Model
454
V8
70-75
3977109
GM
2.3
VEGA
140
L4
74-75
3977109
GM
2.3
VEGA
140
L4
76-77
397817
NAVISTAR
2.8
464
C.
175
L4
397817
NAVISTAR
3.3
544
200
L4
398261
GM
4.3
No Model
260
V8
77-82
398261
GM
4.3
No Model
260
V8
75-76
398261
GM
4.3
No Model
260
V8
77-81
398261
GM
5.7
No Model
350
V8
80
398261
GM
5.7
No Model
350
V8
78-79
398261
GM
5.7
No Model
350
V8
69-76
398261
GM
5.7
No Model
350
V8
77-80
3986
ALLIS CHALMERS
3.3
WC & WF
WC
201
L4
3986
ALLIS CHALMERS
3.3
WD
WD
201
L4
3994226
GM
2.3
No Model
140
L4
74-75
3994226
GM
2.3
VEGA
140
L4
74-75
3994226
GM
2.3
VEGA
140
L4
76-77
3994226
GM
2.3
VEGA
140
L6
76-77
3994226
GM
2.3
VEGA
140
L4
71-76
3994227
GM
2.3
No Model
140
L4
74-75
3994227
GM
2.3
VEGA
140
L4
74-75
3994227
GM
2.3
VEGA
140
L4
76-77
3994227
GM
2.3
VEGA
140
L6
76-77
3994227
GM
2.3
VEGA
140
L4
71-76
3A
TOYOTA
1.5
TERCEL
1A-C
89
L4
80-80
3A
TOYOTA
1.5
TERCEL
3A
89
L4
80-86
3A
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
562
VIN

Casting
Manufacturer
3A
TOYOTA
3A1.7
CUMMINS
3AC
3AC
Liter
Model
VIN
CID Cyl
Year
1.6
COROLLA
4A-C
1.7
A SERIES
97
L4
83-87
105
L3
TOYOTA
1.5
TERCEL
3A
89
L4
80-86
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
3AE-F
FORD
3.7
No Model
223
L6
54-64
3AH
CHRYSLER
2.2
No Model
135
L4
91-93
3AH
CHRYSLER
2.2
No Model
135
L4
90
3AH
CHRYSLER
2.2
SHELBY
135
L4
86-90
3B
GM
1.3
METRO
79
L4
95-96
3B
GM
1.3
TRACKER
79
L4
92-94
3B7934
CATERPILLAR
20.4
D342
1246
L6
3B7934
CATERPILLAR
20.4
D8
1246
L6
3B7934
CATERPILLAR
20.4
D8
1246
L6
3B7934
CATERPILLAR
20.4
D8
1246
L6
3B-7934
CATERPILLAR
16.3
No Model
992
L6
3B-7934
CATERPILLAR
20.4
13000
1246
L6
3B7937
CATERPILLAR
20.4
D342
1246
L6
3B7937
CATERPILLAR
20.4
D8
1246
L6
3B7937
CATERPILLAR
20.4
D8
1246
L6
3B7937
CATERPILLAR
20.4
D8
1246
L6
3B-7937
CATERPILLAR
20.4
13000
1246
L6
3B9511
CATERPILLAR
20.4
D342
1246
L6
3B9511
CATERPILLAR
20.4
D8
1246
L6
3B9511
CATERPILLAR
20.4
D8
1246
L6
3B9511
CATERPILLAR
20.4
D8
1246
L6
3B-9511
CATERPILLAR
16.3
No Model
992
L6
3B-9511
CATERPILLAR
20.4
13000
1246
L6
3C
FORD
5.8
No Model
351
V8
80-82
3C
FORD
5.8
No Model
351
V8
69-78
3C
FORD
5.8
No Model
351
V8
79
3C
FORD
5.8
No Model
351
V8
68-74
3C
FORD
5.8
WSG-858
351
V8
3C1
NAVISTAR
8.7
530
530
L6
93-96
3E
TOYOTA
1.5
TERCEL
3E
89
L4
87-90
3E
TOYOTA
1.5
TERCEL
3E-E
89
L4
90-94
3F5020
CATERPILLAR
8.6
D318
525
L6
3F5020
CATERPILLAR
8.6
D318(2)
525
L6
3F-5020
CATERPILLAR
8.6
D318(2)
525
L6
3F5026
CATERPILLAR
5.1
955
312
L4
3F5026
CATERPILLAR
5.1
955
312
L4
3F5026
CATERPILLAR
7.0
D330C
CB
425
L4
3F5026
CATERPILLAR
7.0
D330C
SP
425
L4
3F-5026
CATERPILLAR
5.1
No Model
312
L4
3F6777
CATERPILLAR
5.1
955
312
L4
3F6777
CATERPILLAR
5.1
955
312
L4
3F6777
CATERPILLAR
7.0
D330C
CB
425
L4
3F6777
CATERPILLAR
7.0
D330C
SP
425
L4
3F-6777
CATERPILLAR
5.1
No Model
312
L4
3H
FORD
3.3
No Model
200
L6
3H
FORD
3.3
No Model
200
L6
83
3K
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
3KC
TOYOTA
1.2
COROLLA
3K-C
3M
FORD
4.3
MERCURY METEOR
3M
FORD
4.7
FALCON
3M
FORD
5.8
3M
FORD
3M
80-82
71
L4
70-79
260
V8
63-64
289
V8
64-68
No Model
351
V8
80-82
5.8
No Model
351
V8
83-91
FORD
5.8
No Model
351
V8
69-78
3M
FORD
5.8
No Model
351
V8
79
3M
FORD
5.8
No Model
351
V8
84-97
563

Casting
Manufacturer
Liter
Model
3M
FORD
5.8
No Model
3M
FORD
5.8
WSG-858
3MA
FORD
5.8
No Model
3MA
FORD
5.8
No Model
3MA
FORD
5.8
3MA
FORD
3MA
CID Cyl
Year
351
V8
68-74
351
V8
351
V8
80-82
351
V8
83-91
No Model
351
V8
69-78
5.8
No Model
351
V8
79
FORD
5.8
No Model
351
V8
84-97
3MA
FORD
5.8
No Model
351
V8
68-74
3MA
FORD
5.8
WSG-858
351
V8
3N3000
CATERPILLAR
48.3
398
2946
V 12
3N3000
CATERPILLAR
48.8
D398
2976
V 12
3R
TOYOTA
1.9
CROWN
113
L4
66-69
3RC
TOYOTA
1.9
CROWN
113
L4
66-69
3-S
TOYOTA
1.6
COROLLA
4A-LC
97
L4
87-88
3S9629
CATERPILLAR
10.5
1674
638
L6
3S9629
CATERPILLAR
10.5
1674
638
L6
3S9629
CATERPILLAR
10.5
1674
638
L6
3S9629
CATERPILLAR
10.5
D334
638
L6
3S9629
CATERPILLAR
10.5
D334
638
L6
3S9629
CATERPILLAR
10.5
D334
638
L6
3SF
TOYOTA
2.0
CAMRY
3SFE
122
L4
3T8018
JOHN DEERE
1.3
380UJ
78
L3
3T8018
JOHN DEERE
1.3
3T80J
78
L3
3T84
JOHN DEERE
1.4
3TN84
87
L3
3T84
JOHN DEERE
1.7
3T90J
105
L3
3T84
JOHN DEERE
1.7
3T90TJ
105
L3
3U
FORD
6.4
No Model
390
V8
61-76
3U
FORD
6.4
No Model
390
V8
68-76
3Y
FORD
7.5
LSG875
460
V8
3Y
FORD
7.5
No Model
460
V8
87-98
3Y
FORD
7.5
No Model
460
V8
79-87
3Y
FORD
7.5
No Model
SVO
460
V8
87-97
3Y
TOYOTA
2.0
VAN
3Y-EC
122
L4
84-85
3YA
FORD
7.5
LSG875
460
V8
3YA
FORD
7.5
No Model
460
V8
87-98
3YA
FORD
7.5
No Model
460
V8
79-87
3YA
FORD
7.5
No Model
SVO
460
V8
87-97
3YAB
FORD
7.5
LSG875
460
V8
3YAB
FORD
7.5
No Model
460
V8
87-98
3YAB
FORD
7.5
No Model
460
V8
79-87
3YAB
FORD
7.5
No Model
SVO
460
V8
87-97
ISUZU
3.9
4BD1
235
L4
85-90
ISUZU
3.9
4BD1T
235
L4
86-91
ISUZU
3.9
No Model
4BD1
235
L4
85-90
ISUZU
3.9
No Model
4BD1T
235
L4
86-91
ISUZU
5.4
6BB1
329
L6
ISUZU
5.8
6BD1
353
L6
40011
WAUKESHA
0.0
CHS
L4
40025E
HERCULES
4.6
No Model
282
L6
4006908
ALLIS CHALMERS
3.3
6060
200
L4
4007915
ALLIS CHALMERS
3.3
6060
200
L4
4008043
ALLIS CHALMERS
3.3
6060
200
L4
4008078
ALLIS CHALMERS
3.3
6060
200
L4
40081456
ALLIS CHALMERS
4.9
7010
301
L6
4008146
ALLIS CHALMERS
4.9
200
301
L6
4008148
ALLIS CHALMERS
4.3
2500
265
L6
40091E
HERCULES
3.7
D2300
226
L4
40091E
HERCULES
3.7
D-2300
226
L4
40091E
HERCULES
3.8
No Model
232
L6
564
VIN
Q
JXA
86-91
76-88

Casting
Manufacturer
Liter
Model
40091E
HERCULES
4.0
No Model
40091E
HERCULES
4.6
No Model
40091E
HERCULES
5.2
No Model
400943
GM
6.6
400943
GM
400943
VIN
Year
245
L6
282
L6
JXC
320
L6
No Model
RO
400
V8
68-69
7.5
No Model
455
V8
68-76
GM
7.5
No Model
455
V8
74-76
400943
GM
7.5
No Model
455
V8
74-76
400943
GM
7.5
No Model
455
V8
74-74
400943
GM
7.5
No Model
455
V8
74-74
400943
GM
7.5
No Model
455
V8
72-75
40094D
HERCULES
3.7
D2300
226
L4
40094D
HERCULES
3.7
D-2300
226
L4
40094D
HERCULES
3.8
No Model
JXA
232
L6
40094D
HERCULES
4.0
No Model
JXC
245
L6
40094D
HERCULES
4.6
No Model
282
L6
40094D
HERCULES
5.2
No Model
320
L6
40094E
HERCULES
3.7
D2300
226
L4
40094E
HERCULES
3.7
D-2300
226
L4
40094E
HERCULES
3.8
No Model
JXA
232
L6
40094E
HERCULES
4.0
No Model
JXC
245
L6
40094E
HERCULES
4.6
No Model
282
L6
40094E
HERCULES
5.2
No Model
JXC
320
L6
40-2002601
HERCULES
2.7
G1600
163
L4
4020230
ALLIS CHALMERS
3.2
No Model
200
L4
4020230
ALLIS CHALMERS
3.3
443
200
L4
4020344
ALLIS CHALMERS
4.3
2500
265
L6
4020345
ALLIS CHALMERS
3.3
443
200
L4
4020345
ALLIS CHALMERS
4.3
2500
265
L6
4020345
ALLIS CHALMERS
4.3
D19
262
L6
4020345
ALLIS CHALMERS
4.9
180
301
L6
4020345
ALLIS CHALMERS
4.9
190XT
301
L6
4022256
ALLIS CHALMERS
4.3
2500
265
L6
4022256
ALLIS CHALMERS
4.9
180
301
L6
4022256
ALLIS CHALMERS
4.9
180
301
L6
4022256
ALLIS CHALMERS
4.9
200
301
L6
4022256
ALLIS CHALMERS
4.9
200
301
L6
4022301
ALLIS CHALMERS
4.3
2500
265
L6
4022490
ALLIS CHALMERS
4.3
2500
265
L6
4022491
ALLIS CHALMERS
4.9
190XT
301
L6
4023823
ALLIS CHALMERS
4.9
200
301
L6
4025042
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4025042
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4025042
ALLIS CHALMERS
7.0
D21
D-21
426
L6
70-70
4025478
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4025478
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4027134
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4027134
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4027169
CHRYSLER
5.9
DURANGO
360
V8
98-02
4027169
CHRYSLER
5.9
MAGNUM
360
V8
92-01
4027169
CHRYSLER
5.9
MAGNUM
360
V8
92-97
4027169
CHRYSLER
5.9
No Model
360
V8
89-91
4027169
CHRYSLER
5.9
No Model
360
V8
77-79
4027169
CHRYSLER
5.9
No Model
360
V8
80
4027169
CHRYSLER
5.9
No Model
360
V8
83-87
4027169
CHRYSLER
5.9
No Model
360
V8
71-75
4027169
CHRYSLER
5.9
No Model
360
V8
76-79
4027169
CHRYSLER
5.9
No Model
360
V8
74-76
4027169
CHRYSLER
5.9
No Model
360
V8
77-79
4027169
CHRYSLER
5.9
No Model
360
V8
80
565
JXC
CID Cyl
JXC
G
G

Casting
Manufacturer
Liter
Model
CID Cyl
Year
4027169
CHRYSLER
5.9
No Model
4027169
CHRYSLER
5.9
No Model
360
V8
73-75
360
V8
4027169
CHRYSLER
5.9
No Model
76-78
360
V8
4027169
CHRYSLER
5.9
79
No Model
360
V8
4027169
CHRYSLER
80
5.9
No Model
360
V8
80-82
4027169
4027169
CHRYSLER
5.9
No Model
360
V8
77-79
CHRYSLER
5.9
No Model
360
V8
80-82
4027169
CHRYSLER
5.9
No Model
360
V8
81-82
4027169
CHRYSLER
5.9
No Model
360
V8
81
4027169
CHRYSLER
5.9
No Model
360
V8
82
4027169
CHRYSLER
5.9
No Model
360
V8
83-88
4027169
CHRYSLER
5.9
No Model
360
V8
89-91
4027172
CHRYSLER
5.2
DAKOTA
318
V8
88-91
4027172
CHRYSLER
5.2
No Model
318
V8
73-76
4027172
CHRYSLER
5.2
No Model
318
V8
77-80
4027172
CHRYSLER
5.2
No Model
318
V8
69-76
4027172
CHRYSLER
5.2
No Model
318
V8
77-79
4027172
CHRYSLER
5.2
No Model
318
V8
80
4027172
CHRYSLER
5.2
No Model
318
V8
78-80
4027172
CHRYSLER
5.2
No Model
318
V8
81-82
4027172
CHRYSLER
5.2
No Model
318
V8
81-82
4027172
CHRYSLER
5.2
No Model
318
V8
81-82
4027172
CHRYSLER
5.2
No Model
318
V8
81-82
4027172
CHRYSLER
5.2
No Model
318
V8
81-85
4027172
CHRYSLER
5.2
No Model
318
V8
81-82
4027172
CHRYSLER
5.2
No Model
318
V8
83-91
4027172
CHRYSLER
5.2
No Model
318
V8
81-82
4027172
CHRYSLER
5.2
No Model
318
V8
83-87
4027172
CHRYSLER
5.2
No Model
318
V8
83-89
4027172
CHRYSLER
5.2
No Model
318
V8
83-87
4027172
CHRYSLER
5.2
No Model
318
V8
83-84
4027172
CHRYSLER
5.2
No Model
318
V8
62-67
4027172
CHRYSLER
5.9
No Model
361
V8
80-81
4027172
CHRYSLER
5.9
No Model
361
V8
57-78
4027172
CHRYSLER
6.3
No Model
383
V8
59-71
4027172
CHRYSLER
6.6
No Model
400
V8
75-76
4027172
CHRYSLER
6.6
No Model
400
V8
72-78
4027172
CHRYSLER
6.6
No Model
400
V8
74-78
4027175
CHRYSLER
6.8
No Model
413
V8
59-77
4027175
CHRYSLER
7.0
HEMI
426
V8
66-71
4027175
CHRYSLER
7.2
No Model
440
V8
76-76
4027175
CHRYSLER
7.2
No Model
440
V8
66-73
4027175
CHRYSLER
7.2
No Model
440
V8
74-76
4028608
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4028608
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4029065
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4029065
ALLIS CHALMERS
7.0
3400
426
L6
70-85
4035936
ALLIS CHALMERS
7.0
8030
426
L6
4035953
ALLIS CHALMERS
7.0
8030
426
L6
403707
GM
6.6
No Model
RO
400
V8
68-69
403707
GM
7.5
No Model
455
V8
74-76
403707
GM
7.5
No Model
455
V8
74-76
403707
GM
7.5
No Model
455
V8
74-74
403707
GM
7.5
No Model
455
V8
74-74
403707
GM
7.5
No Model
455
V8
72-75
4037168
ALLIS CHALMERS
7.0
8030
426
L6
403803000
HERCULES
7.8
D-4800
478
L6
403803000
HERCULES
7.8
D-4800T
478
L6
403803000
HERCULES
7.8
D5000
478
L6
566
VIN
TRK
HJR

Casting
Manufacturer
Liter
Model
403803000
OLIVER
7.8
478
478
L6
403803000
WHITE
7.8
478
478
L6
404
GM
3.0
No Model
181
V6
82-85
404440
GM
6.6
No Model
RO
400
V8
65-69
404440
GM
6.6
No Model
RO
400
V8
68-69
404440
GM
7.0
No Model
425
V8
65-67
404440
GM
7.5
No Model
455
V8
68-76
405
GM
2.5
No Model
151
L4
87-88
405
GM
2.5
No Model
151
L4
89
405
GM
2.5
No Model
151
L4
90-92
405
GM
2.5
S-10
151
L4
91-93
405
GM
2.5
S-10
151
L4
87-91
40570
JOHN DEERE
4.4
3020
270
L4
405859R1
NAVISTAR
2.6
454
C(1)
157
L4
405954
GM
6.6
No Model
RO
400
V8
68-69
405954
GM
7.5
No Model
455
V8
68-76
405954
GM
7.5
No Model
455
V8
74-76
405954
GM
7.5
No Model
455
V8
74-76
405954
GM
7.5
No Model
455
V8
74-74
405954
GM
7.5
No Model
455
V8
74-74
405954
GM
7.5
No Model
455
V8
72-75
405959R1
NAVISTAR
2.6
454
C(1)
157
L4
406
GM
2.5
No Model
151
L4
87-88
406
GM
2.5
No Model
151
L4
89-91
407N
GM
4.1
No Model
250
L6
77-78
407N
GM
4.1
No Model
250
L6
66-75
408026
GM
3.9
OLDSMOBILE
238
37-48
40950E
HERCULES
3.7
D2300
226
L4
40950E
HERCULES
3.7
D-2300
226
L4
40950E
HERCULES
3.8
No Model
232
L6
40950E
HERCULES
4.0
No Model
245
L6
40950E
HERCULES
4.6
No Model
282
L6
40950E
HERCULES
5.2
No Model
320
L6
409511
GM
4.2
No Model
257
L8
37-48
4095246
CHRYSLER
3.7
No Model
225
L6
76-87
4095246
CHRYSLER
3.7
No Model
225
L6
69-80
4095246
CHRYSLER
3.7
No Model
225
L6
60-80
4095246
CHRYSLER
3.7
No Model
225
L6
77-80
4095246
CHRYSLER
3.7
No Model
225
L6
81-82
4095246
CHRYSLER
3.7
No Model
225
L6
81-82
4095246
CHRYSLER
3.7
No Model
225
L6
82
4095246
CHRYSLER
3.7
No Model
225
L6
82-87
4095246
CHRYSLER
3.7
No Model
225
L6
83-84
4095246
CHRYSLER
3.7
No Model
225
L6
80
4095246
CHRYSLER
3.7
No Model
225
L6
82
40991E
HERCULES
3.7
D2300
226
L4
40991E
HERCULES
3.7
D-2300
226
L4
40991E
HERCULES
3.8
No Model
232
L6
40991E
HERCULES
4.0
No Model
245
L6
40991E
HERCULES
4.6
No Model
282
L6
40991E
HERCULES
5.2
No Model
JXC
320
L6
40F
NISSAN
2.4
STANZA
146
L4
91-98
410031
GM
4.2
No Model
257
L8
37-48
410098
GM
3.9
OLDSMOBILE
238
37-48
4101
BUDA
5.3
No Model
325
L6
4101
BUDA
6.0
No Model
369
L6
4101
BUDA
6.4
No Model
393
L6
4101
BUDA
7.0
No Model
430
L6
410177
GM
1.6
CHEVETTE
98
L4
567
VIN
JXC
JXC
JXC
CID Cyl
Year
80-82

Casting
Manufacturer
Liter
Model
VIN
41026B
HERCULES
3.1
No Model
191
L6
41026B
HERCULES
3.1
No Model
191
L6
41026B
HERCULES
3.1
QXA-3
190
L6
41026B
HERCULES
3.1
QXA-5
190
L6
41026B
HERCULES
3.4
QXB-3
205
L6
41026B
HERCULES
3.4
QXB-5
205
L6
41026B
HERCULES
3.6
QXC-3
221
L6
41026B
HERCULES
3.6
QXC-5
221
L6
41026B
HERCULES
3.8
QXD-3
230
L6
41026B
HERCULES
3.8
QXD-5
230
L6
41026B
HERCULES
3.9
QXLD-3
237
L6
41026B
HERCULES
3.9
QXLD-5
237
L6
41026B
HERCULES
3.9
QXLDER-3
237
L6
41026B
HERCULES
3.9
QXLDER-5
237
L6
410900
GM
3.9
OLDSMOBILE
238
37-48
410991
GM
3.9
OLDSMOBILE
238
37-48
41111638
PERKINS
8.9
540
540
V8
41111664
PERKINS
8.4
510
510
V8
411567
GM
4.4
No Model
267
V8
411567
GM
5.0
No Model
305
V8
82
411567
GM
5.0
No Model
305
V8
81-87
411567
GM
5.0
No Model
305
V8
76-79
411567
GM
5.0
No Model
305
V8
80-81
411567
GM
5.0
No Model
305
V8
78-88
411567
GM
5.0
No Model
305
V8
83
411567
GM
5.0
No Model
305
V8
77-79
411567
GM
5.7
No Model
350
V8
78-79
411567
GM
5.7
No Model
350
V8
80-88
411567
GM
5.7
No Model
350
V8
77-82
411567
GM
5.7
No Model
350
V8
79-88
411567
GM
5.7
No Model
350
V8
80-83
411567
GM
5.7
No Model
350
V8
74-76
411567
GM
5.7
No Model
350
V8
68-75
412625
GM
4.2
No Model
257
L8
37-48
4127
GM
1.5
SPECTRUM
92
L4
85-87
413973
GM
3.9
OLDSMOBILE
238
37-48
414622
GM
3.9
OLDSMOBILE
238
37-48
414699
GM
3.9
OLDSMOBILE
238
37-48
416847
GM
4.2
No Model
257
L8
37-48
418882
GM
4.3
No Model
260
V8
75-76
418882
GM
4.3
No Model
260
V8
77-82
418882
GM
4.3
No Model
260
V8
75-76
418882
GM
4.3
No Model
260
V8
77-81
418882
GM
5.0
No Model
307
V8
87-90
418882
GM
5.0
No Model
307
V8
81-88
418882
GM
5.7
No Model
350
V8
80
418882
GM
5.7
No Model
350
V8
78-79
418882
GM
5.7
No Model
350
V8
69-76
418882
GM
5.7
No Model
350
V8
77-80
419326
PACKARD
5.9
No Model
359
L8
54
419327
PACKARD
5.9
No Model
359
L8
54
419606
PACKARD
5.4
No Model
327
L8
48-54
419607
PACKARD
5.4
No Model
327
L8
48-54
419608
PACKARD
5.4
No Model
327
L8
48-54
419609
PACKARD
5.4
No Model
327
L8
48-54
4196N
GM
1.4
CHEVETTE
85
L4
76-77
41-R
TOYOTA
2.0
CELICA
18R-C
120
L4
71-74
4-1-R
TOYOTA
1.9
CROWN
113
L4
66-69
420342
WHITE
7.0
No Model
427
L6
TURBO
568
CID Cyl
Year
79-82

Casting
Manufacturer
Liter
Model
VIN
420342
WHITE
7.4
No Model
452
L6
420342
WHITE
7.4
No Model
452
L6
420342
WHITE
8.3
No Model
504
L6
420342
WHITE
8.7
No Model
532
L6
421005
PACKARD
5.4
No Model
327
L8
48-54
421007
PACKARD
5.4
No Model
327
L8
48-54
4239611
CHRYSLER
2.5
DAKOTA
150
L4
91-02
4239611
CHRYSLER
2.5
No Model
150
L4
86-88
4239611
CHRYSLER
2.5
No Model
150
L4
84-86
4273232
CHRYSLER
2.2
No Model
135
L4
86-88
4273232
CHRYSLER
2.5
DAKOTA
153
L4
94-95
4273232
CHRYSLER
2.5
No Model
153
L4
87-90
4273232
CHRYSLER
2.5
No Model
153
L4
91-95
4273232
CHRYSLER
2.5
No Model
153
L4
86-87
4273232
CHRYSLER
2.5
No Model
153
L4
93-95
4278232
CHRYSLER
2.2
No Model
135
L4
82-85
4278232
CHRYSLER
2.2
No Model
135
L4
81-82
4278232
CHRYSLER
2.2
No Model
135
L4
83-85
4278232
CHRYSLER
2.2
No Model
135
L4
83-85
42947E
HERCULES
5.6
WXC
339
L6
42974E
HERCULES
5.6
WXC
339
L6
42979E
HERCULES
3.7
D2300
226
L4
42979E
HERCULES
3.7
D-2300
226
L4
42979E
HERCULES
3.8
No Model
232
L6
42979E
HERCULES
4.0
No Model
245
L6
42979E
HERCULES
4.3
JXB
263
L6
42979E
HERCULES
4.6
No Model
282
L6
42979E
HERCULES
5.2
No Model
320
L6
42T
MITSUBISHI
11.2
680
L6
4303200
ALLIS CHALMERS
2.5
153
153
L4
4303200
ALLIS CHALMERS
2.5
153
153
L4
4303200
ALLIS CHALMERS
2.5
No Model
153
L4
4303200
ALLIS CHALMERS
2.9
No Model
175
L4
430342
WHITE
7.0
No Model
427
L6
430342
WHITE
7.4
No Model
452
L6
430342
WHITE
7.4
No Model
452
L6
430342
WHITE
8.3
No Model
504
L6
430342
WHITE
8.7
No Model
532
L6
4323738
CHRYSLER
3.9
MAGNUM
239
V6
92-02
4323769
CHRYSLER
3.9
MAGNUM
239
V6
92-02
4323769
CHRYSLER
3.9
No Model
239
V6
88-91
4323769
CHRYSLER
3.9
TRUCK
239
V6
87-88
4323814
CHRYSLER
2.2
No Model
135
L4
90
4323814
CHRYSLER
2.2
No Model
135
L4
86-87
4323814
CHRYSLER
2.2
SHELBY
135
L4
86-90
4326229
GM
5.0
No Model
GMC
302
L6
50-57
43322
CASE
3.6
1490
D(1)
219
L4
4337719
ALLIS CHALMERS
8.5
10000
516
L6
4340263
BUDA
5.3
No Model
325
L6
4340263
BUDA
6.0
No Model
369
L6
4340263
BUDA
6.4
No Model
393
L6
4340263
BUDA
7.0
No Model
430
L6
4341302
BUDA
7.7
No Model
470
L6
4341302
BUDA
8.6
No Model
525
L6
4347501
ALLIS CHALMERS
8.5
10000
516
L6
4347501
ALLIS CHALMERS
8.5
11000
516
L6
4347501
ALLIS CHALMERS
8.5
11000
516
L6
4347501
ALLIS CHALMERS
10.2
HD11
624
L6
4347501
BUDA
8.5
HD11
516
L6
JXC
JXC
6D22
569
CID Cyl
Year
49-54
92-95
49-54

Casting
Manufacturer
Liter
Model
VIN
4347501
BUDA
10.2
HD11
624
L6
4348399
ALLIS CHALMERS
5.6
6000
344
L4
4348399
ALLIS CHALMERS
5.6
HD6
344
L4
4348399
ALLIS CHALMERS
5.6
No Model
344
L4
4348399
BUDA
5.6
No Model
344
L4
4348425
ALLIS CHALMERS
5.6
6000
344
L4
4348425
ALLIS CHALMERS
5.6
HD6
344
L4
4348425
ALLIS CHALMERS
5.6
No Model
344
L4
4348425
BUDA
5.6
No Model
344
L4
4348525
ALLIS CHALMERS
5.6
6000
344
L4
4348525
ALLIS CHALMERS
5.6
HD6
344
L4
4348525
ALLIS CHALMERS
5.6
No Model
344
L4
4348525
BUDA
5.6
No Model
344
L4
43526D
HERCULES
3.7
D2300
226
L4
43526D
HERCULES
3.7
D-2300
226
L4
43526D
HERCULES
3.8
No Model
232
L6
43526D
HERCULES
4.0
No Model
245
L6
43526D
HERCULES
4.3
JXB
263
L6
43526D
HERCULES
4.6
No Model
282
L6
43526D
HERCULES
5.2
No Model
320
L6
43526E
HERCULES
3.7
D2300
226
L4
43526E
HERCULES
3.7
D-2300
226
L4
43526E
HERCULES
3.7
D-2300
226
L4
43526E
HERCULES
3.8
No Model
232
L6
43526E
HERCULES
4.0
No Model
245
L6
43526E
HERCULES
4.6
No Model
282
L6
43526E
HERCULES
5.2
No Model
320
L6
43528B
HERCULES
5.6
WXC
339
L6
43528E
HERCULES
5.6
WXC
339
L6
43531E
HERCULES
3.7
D2300
226
L4
43531E
HERCULES
3.7
D-2300
226
L4
43531E
HERCULES
3.7
D-2300
226
L4
43531E
HERCULES
3.8
No Model
232
L6
43531E
HERCULES
4.0
No Model
245
L6
43531E
HERCULES
4.3
JXB
263
L6
43531E
HERCULES
4.6
No Model
282
L6
43531E
HERCULES
5.2
No Model
320
L6
43532
HERCULES
3.7
D2300
226
L4
43532
HERCULES
3.7
D-2300
226
L4
43532
HERCULES
3.7
D-2300
226
L4
43532
HERCULES
3.8
No Model
232
L6
43532
HERCULES
4.0
No Model
245
L6
43532
HERCULES
4.3
JXB
263
L6
43532
HERCULES
4.6
No Model
282
L6
43532
HERCULES
5.2
No Model
320
L6
4354423
ALLIS CHALMERS
5.6
6000
344
L4
4354424
ALLIS CHALMERS
8.5
10000
516
L6
4354425
ALLIS CHALMERS
8.5
10000
516
L6
4354425
ALLIS CHALMERS
8.5
11000
516
L6
4354426
ALLIS CHALMERS
5.6
6000
344
L4
43557789
ALLIS CHALMERS
8.5
11000
516
L6
4357323
ALLIS CHALMERS
8.5
10000
516
L6
4357323
ALLIS CHALMERS
8.5
11000
516
L6
4357324
ALLIS CHALMERS
8.5
10000
516
L6
4357324
ALLIS CHALMERS
8.5
11000
516
L6
4357331
ALLIS CHALMERS
5.6
6000
344
L4
4357334
ALLIS CHALMERS
8.5
10000
516
L6
4357334
ALLIS CHALMERS
8.5
11000
516
L6
4359794
ALLIS CHALMERS
5.6
6000
344
L4
HD
HD
HD
570
JXC
JXC
JXC
JXC
JXC
JXC
JXC
JXC
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
4359796
ALLIS CHALMERS
5.6
6000
344
L4
4359873
ALLIS CHALMERS
5.6
6000
344
L4
4359874
ALLIS CHALMERS
5.6
6000
344
L4
4361324
ALLIS CHALMERS
12.7
HD21
779
L6
4361324
ALLIS CHALMERS
13.8
16000T
844
L6
4361324
ALLIS CHALMERS
13.8
16000T
844
L6
4361324
ALLIS CHALMERS
15.9
No Model
971
L6
4361324
BUDA
13.8
No Model
844
L6
4361324
BUDA
15.9
No Model
971
L6
4371087
ALLIS CHALMERS
13.8
16000T
844
L6
4371087
ALLIS CHALMERS
15.9
No Model
971
L6
4371087
BUDA
13.8
No Model
844
L6
4371087
BUDA
15.9
No Model
971
L6
4371093
ALLIS CHALMERS
12.7
HD21
779
L6
4371093
ALLIS CHALMERS
14.7
No Model
896
L6
4371093
BUDA
12.8
No Model
779
L6
4371093
BUDA
13.8
No Model
844
L6
4371094
ALLIS CHALMERS
12.7
HD21
779
L6
4371094
ALLIS CHALMERS
14.7
No Model
896
L6
4371097
BUDA
13.8
No Model
844
L6
4371097
BUDA
15.9
No Model
971
L6
43734D
NAVISTAR
2.5
No Model
152
L4
43734D
NAVISTAR
2.7
No Model
164
L4
43734D
NAVISTAR
2.8
No Model
174
L6
43734D
NAVISTAR
4.1
248
L4
61-68
43734DB
NAVISTAR
2.5
No Model
152
L4
61-68
43734DB
NAVISTAR
2.5
No Model
152
L4
43734DB
NAVISTAR
4.1
248
L4
43734DC
NAVISTAR
2.5
385
D155
155
L3
43734DC
NAVISTAR
2.5
No Model
152
L4
43734DC
NAVISTAR
2.7
No Model
164
L4
43734DC
NAVISTAR
2.8
No Model
174
L6
43734DC
NAVISTAR
4.1
248
L4
43734DCX
NAVISTAR
2.5
385
D155
155
L3
43734DCX
NAVISTAR
2.7
No Model
164
L4
43734DCX
NAVISTAR
2.8
No Model
174
L6
43734DD
NAVISTAR
2.5
No Model
152
L4
61-68
43734DD
NAVISTAR
4.1
248
L4
61-68
43734DEX
NAVISTAR
2.5
385
D155
155
L3
43734DEX
NAVISTAR
2.7
No Model
164
L4
43734DEX
NAVISTAR
2.8
No Model
174
L6
43734DF
NAVISTAR
2.5
385
155
L3
43734DF
NAVISTAR
2.7
No Model
164
L4
43734DF
NAVISTAR
2.8
No Model
174
L6
43734DFY
NAVISTAR
2.5
385
155
L3
43734DFY
NAVISTAR
2.7
No Model
164
L4
43734DFY
NAVISTAR
2.8
No Model
174
L6
43734DG
NAVISTAR
2.5
385
155
L3
43734DG
NAVISTAR
2.7
No Model
164
L4
43734DG
NAVISTAR
2.8
No Model
174
L6
43734DH
NAVISTAR
2.8
350, 350H, 350HC
C(1)
175
L4
43734DHX
NAVISTAR
2.5
385
D155
155
L3
43734DHX
NAVISTAR
2.7
No Model
164
L4
43734DHX
NAVISTAR
2.8
No Model
174
L6
43739
NAVISTAR
2.5
385
155
L3
43739
NAVISTAR
2.7
No Model
164
L4
43739
NAVISTAR
2.8
No Model
174
L6
4388249
ALLIS CHALMERS
13.1
19000
799
L6
4388251
ALLIS CHALMERS
13.8
21000
844
L6
D155
D155
D155
D155
571
CID Cyl
Year
61-68
61-68
61-68
61-68

Casting
Manufacturer
Liter
Model
4388251
ALLIS CHALMERS
13.8
25000
844
L6
4390219
ALLIS CHALMERS
13.8
21000
844
L6
4390219
ALLIS CHALMERS
13.8
25000
844
L6
4390221
ALLIS CHALMERS
13.8
21000
844
L6
4390221
ALLIS CHALMERS
13.8
25000
844
L6
4390223
ALLIS CHALMERS
13.1
19000
799
L6
4390240
ALLIS CHALMERS
13.8
21000
844
L6
4390240
ALLIS CHALMERS
13.8
25000
844
L6
4390241
ALLIS CHALMERS
13.8
21000
844
L6
4390241
ALLIS CHALMERS
13.8
25000
844
L6
4390415
ALLIS CHALMERS
13.8
21000
844
L6
4390415
ALLIS CHALMERS
13.8
25000
844
L6
4390803
ALLIS CHALMERS
13.8
21000
844
L6
4391068
ALLIS CHALMERS
13.1
19000
799
L6
4391186
ALLIS CHALMERS
13.8
21000
844
L6
4391186
ALLIS CHALMERS
13.8
25000
844
L6
4391187
ALLIS CHALMERS
13.1
19000
799
L6
4391953
ALLIS CHALMERS
13.8
21000
844
L6
4391953
ALLIS CHALMERS
13.8
25000
844
L6
4392082
ALLIS CHALMERS
13.8
21000
844
L6
4392082
ALLIS CHALMERS
13.8
25000
844
L6
4394647
ALLIS CHALMERS
13.8
21000
844
L6
4394647
ALLIS CHALMERS
13.8
25000
844
L6
4394696
ALLIS CHALMERS
13.8
21000
844
L6
4394696
ALLIS CHALMERS
13.8
25000
844
L6
4395184
ALLIS CHALMERS
13.8
21000
844
L6
4395184
ALLIS CHALMERS
13.8
25000
844
L6
4395456
ALLIS CHALMERS
13.8
25000
844
L6
4395458
ALLIS CHALMERS
12.0
6120T
731
L6
4395458
ALLIS CHALMERS
13.8
6138T
844
L6
4395458
DEUTZ
12.0
8550
731
L6
4395623
ALLIS CHALMERS
13.8
25000
844
L6
4395630
ALLIS CHALMERS
12.0
6120T
731
L6
4395630
ALLIS CHALMERS
13.8
6138T
844
L6
4395876
ALLIS CHALMERS
13.8
21000
844
L6
4395876
ALLIS CHALMERS
13.8
25000
844
L6
4396001
ALLIS CHALMERS
13.8
21000
844
L6
4396001
ALLIS CHALMERS
13.8
25000
844
L6
44025E
HERCULES
3.7
D2300
226
L4
44025E
HERCULES
3.7
D-2300
226
L4
44025E
HERCULES
3.7
D-2300
226
L4
44025E
HERCULES
3.8
No Model
232
L6
44025E
HERCULES
4.0
No Model
245
L6
44025E
HERCULES
4.3
JXB
263
L6
44025E
HERCULES
5.2
No Model
JXC
320
L6
442
GM
5.0
No Model
305
V8
76-79
442
GM
5.0
No Model
305
V8
80-81
442
GM
5.0
No Model
305
V8
78-88
442
GM
5.0
No Model
305
V8
76
442
GM
5.0
No Model
305
V8
83
442
GM
5.0
No Model
305
V8
77-79
442
GM
5.7
No Model
350
V8
76
4434
ACURA
2.5
LEGEND
C25A1
151
V6
86-87
4448486
CHRYSLER
2.5
DAKOTA
153
L4
94-95
4448486
CHRYSLER
2.5
DAKOTA
153
L4
89-92
4448486
CHRYSLER
2.5
No Model
153
L4
87-90
4448486
CHRYSLER
2.5
No Model
153
L4
91-95
4448486
CHRYSLER
2.5
No Model
153
L4
93-95
4448486
CHRYSLER
2.5
No Model
153
L4
92-93
572
VIN
JXC
CID Cyl
Year
85-94

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
4448488
CHRYSLER
2.5
No Model
4448488
CHRYSLER
2.5
No Model
153
L4
87-90
153
L4
4448493
CHRYSLER
2.2
No Model
91-95
135
L4
4448493
CHRYSLER
2.2
91-93
No Model
135
L4
4448493
CHRYSLER
90
2.2
No Model
135
L4
86-90
4448493
4448493
CHRYSLER
2.2
No Model
135
L4
91-94
CHRYSLER
2.2
SHELBY
135
L4
86-90
4456
ACURA
1.6
INTEGRA
D16A1
97
L4
86-89
44571DB
NAVISTAR
4.1
250
L6
44571DB
NAVISTAR
4.3
400
264
L6
63-74
44571DB
NAVISTAR
4.6
UTD282
282
L6
53-70
44571DE
NAVISTAR
4.1
250
L6
44571DE
NAVISTAR
4.3
400
264
L6
63-74
44571DE
NAVISTAR
4.6
UTD282
282
L6
53-70
44571DEX
NAVISTAR
4.1
250
L6
44572
NAVISTAR
4.1
250
L6
44572
NAVISTAR
4.3
400
264
L6
63-74
44572
NAVISTAR
4.6
UTD282
282
L6
53-70
4465291
NAVISTAR
7.3
No Model
MV
446
V8
74-82
446530
NAVISTAR
7.3
No Model
MV
446
V8
74-82
446530C1
NAVISTAR
7.3
No Model
MV
446
V8
74-82
446531
NAVISTAR
7.3
No Model
MV
446
V8
74-82
446531C1
NAVISTAR
7.3
No Model
MV
446
V8
74-82
44670
HUDSON
3.5
No Model
212
L6
32-47
446766C
NAVISTAR
6.6
No Model
404
V8
80-86
448013
NAVISTAR
8.8
No Model
537
V8
75-82
4480130
NAVISTAR
8.8
No Model
537
V8
75-82
4483197
CHRYSLER
2.2
No Model
135
L4
90
4483197
CHRYSLER
2.2
No Model
135
L4
89-90
4483197
CHRYSLER
2.2
SHELBY
135
L4
86-90
4483654
CHRYSLER
3.3
CONCORDE
201
V6
93-97
4483654
CHRYSLER
3.3
TOWN & COUNTRY
201
V6
90-02
4484345
CHRYSLER
2.2
No Model
135
L4
89-90
4487237
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
4487237
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
4487237
JEEP
5.0
No Model
304
V8
70-79
4487237
JEEP
5.9
No Model
360
V8
71-91
4487238
CHRYSLER
6.4
No Model
A/J
390
V8
68-76
4502106
ALLIS CHALMERS
3.8
230
230
L6
4502106
ALLIS CHALMERS
3.8
D17
230
L6
4502106
ALLIS CHALMERS
3.8
G-230
230
L6
4502106
ALLIS CHALMERS
3.8
WD45
230
L6
4502106
ALLIS CHALMERS
4.3
D17
262
L6
4502106
ALLIS CHALMERS
4.5
273
273
L6
4502106
ALLIS CHALMERS
4.5
No Model
273
L6
4502106
BUDA
3.8
No Model
230
L6
4502106
BUDA
4.5
No Model
273
L6
4502107
ALLIS CHALMERS
3.8
D17
230
L6
4502107
ALLIS CHALMERS
3.8
G-230
230
L6
4502107
ALLIS CHALMERS
3.8
WD45
230
L6
4502107
ALLIS CHALMERS
4.3
D17
262
L6
4502107
ALLIS CHALMERS
4.5
273
273
L6
4502107
ALLIS CHALMERS
4.5
No Model
273
L6
4502107
BUDA
3.8
No Model
230
L6
4502107
BUDA
4.5
No Model
273
L6
4502T06
ALLIS CHALMERS
3.8
G-230
230
L6
4503200
ALLIS CHALMERS
2.5
153
153
L4
4503200
ALLIS CHALMERS
2.5
153
153
L4
4503200
ALLIS CHALMERS
2.9
D15
175
L4
MV
573

Casting
Manufacturer
Liter
Model
VIN
4503200
BUDA
2.5
No Model
153
L4
4503200
BUDA
2.9
4BD175
BD
175
L4
4503200
BUDA
2.9
No Model
175
L4
4503200
BUDA
3.0
No Model
182
L4
4505959
ALLIS CHALMERS
3.8
D17
230
L6
4505959
ALLIS CHALMERS
3.8
WD45
230
L6
4505959
ALLIS CHALMERS
4.3
D17
262
L6
4505959
ALLIS CHALMERS
4.5
273
273
L6
4505959
BUDA
3.8
No Model
230
L6
4505959
MILITARY STD
3.8
No Model
230
L6
4507700
ALLIS CHALMERS
3.8
D17
230
L6
4507700
ALLIS CHALMERS
3.8
G-230
230
L6
4507700
ALLIS CHALMERS
3.8
WD45
230
L6
4507700
ALLIS CHALMERS
4.3
D17
262
L6
4507700
ALLIS CHALMERS
4.3
D19
262
L6
4507700
ALLIS CHALMERS
4.3
D19
262
L6
4507700
ALLIS CHALMERS
4.5
273
273
L6
4507700
ALLIS CHALMERS
4.5
No Model
273
L6
4507700
BUDA
3.8
No Model
230
L6
4507700
BUDA
4.3
DD262
262
L6
4512316
ALLIS CHALMERS
2.3
D15
143
L3
4512316
ALLIS CHALMERS
2.5
153
153
L4
4512316
ALLIS CHALMERS
2.5
153
153
L4
4512316
ALLIS CHALMERS
2.5
No Model
153
L4
4512316
ALLIS CHALMERS
2.9
D15
175
L4
4512316
ALLIS CHALMERS
2.9
No Model
175
L4
4512316
WHITE
2.3
2-50
143
L3
4512978
ALLIS CHALMERS
2.5
153
153
L4
4512978
ALLIS CHALMERS
2.5
153
153
L4
4512978
BUDA
2.5
No Model
153
L4
4512978
BUDA
3.0
No Model
182
L4
4514465
ALLIS CHALMERS
3.8
230
230
L6
4514465
ALLIS CHALMERS
3.8
D17
230
L6
4514465
ALLIS CHALMERS
3.8
G-230
230
L6
4514465
ALLIS CHALMERS
3.8
WD45
230
L6
4514465
ALLIS CHALMERS
4.3
D17
262
L6
4514465
ALLIS CHALMERS
4.5
273
273
L6
4514465
ALLIS CHALMERS
4.5
No Model
273
L6
4514465
BUDA
3.8
No Model
230
L6
4514466
ALLIS CHALMERS
3.8
D17
230
L6
4514467
ALLIS CHALMERS
3.8
D17
230
L6
4514467
ALLIS CHALMERS
3.8
WD45
230
L6
4514467
ALLIS CHALMERS
4.3
D17
262
L6
4514467
ALLIS CHALMERS
4.5
273
273
L6
4514467
BUDA
3.8
No Model
230
L6
4515005
ALLIS CHALMERS
2.5
153
153
L4
4515927
ALLIS CHALMERS
4.3
D19
262
L6
4519465
ALLIS CHALMERS
3.8
G-230
230
L6
4519465
ALLIS CHALMERS
4.5
No Model
273
L6
455360R
WHITE
4.7
No Model
288
L6
455360R
WHITE
6.0
No Model
366
L6
455360R
WHITE
6.4
No Model
390
L6
455489
WHITE
4.7
No Model
288
L6
455489
WHITE
6.0
No Model
366
L6
455489
WHITE
6.4
No Model
390
L6
4556433
CHRYSLER
3.8
No Model
231
V6
91-00
4556721
CHRYSLER
2.0
AVENGER
122
L4
95-04
45571DB
NAVISTAR
4.1
250
L6
45571DB
NAVISTAR
4.1
248
L4
574
CID Cyl
Year
82-85

Casting
Manufacturer
Liter
Model
45571DC
NAVISTAR
4.1
248
L4
45571DC
NAVISTAR
4.1
248
L4
45571DC
NAVISTAR
4.6
450
281
L4
45571DC
NAVISTAR
4.6
450
D281
281
L4
45571DD
NAVISTAR
4.1
250
L6
45571DD
NAVISTAR
4.1
250
L6
45571DD
NAVISTAR
4.3
400
264
L6
63-74
45571DD
NAVISTAR
4.3
No Model
264
L4
50-62
45571DD
NAVISTAR
4.6
UTD282
282
L6
53-70
45571DDX
NAVISTAR
4.1
250
L6
45571DE
NAVISTAR
4.1
250
L6
45571DE
NAVISTAR
4.3
400
264
L6
63-74
45571DE
NAVISTAR
4.6
UTD282
282
L6
53-70
45571DEX
NAVISTAR
4.1
250
L6
45571DEX
NAVISTAR
4.3
400
264
L6
63-74
45571DEX
NAVISTAR
4.6
UTD282
282
L6
53-70
45571DFX
NAVISTAR
4.1
250
L6
45571FDX
NAVISTAR
4.1
250
L6
45571FDX
NAVISTAR
4.3
400
264
L6
63-74
45571FDX
NAVISTAR
4.6
UTD282
282
L6
53-70
45572
NAVISTAR
4.1
250
L6
45572
NAVISTAR
4.3
400
264
L6
63-74
45572
NAVISTAR
4.6
UTD282
282
L6
53-70
4557665
CHRYSLER
2.0
NEON
122
L4
95-04
45581DD
NAVISTAR
4.1
250
L6
4568749
GM
5.7
No Model
350
V8
4568749
GM
5.7
No Model
350
V8
74
456-CFG-5128
MACK
12.0
E7
728
L6
89-02
456-CFG-5137
MACK
12.0
E7
728
L6
89-02
456GC4121
MACK
7.2
No Model
438
L6
456GC4121
MACK
8.4
No Model
510
L6
456GC4121
MACK
8.8
No Model
540
L6
456GC4121B
MACK
8.4
No Model
510
L6
456GC4121B
MACK
8.8
No Model
540
L6
456GC4132
MACK
6.2
No Model
377
L6
456GC4132B
MACK
6.6
No Model
405
L6
456GC4132LB
MACK
4.8
No Model
290
L6
456GC4132LB
MACK
5.4
No Model
330
L6
456GC4135
MACK
6.2
No Model
377
L6
456GC417
MACK
6.6
No Model
405
L6
456GC417
MACK
7.1
No Model
431
L6
456GC-417
MACK
8.2
No Model
500
L6
456GC419
MACK
7.2
No Model
438
L6
456GC-419
MACK
7.6
No Model
464
L6
456GC435
MACK
7.2
No Model
438
L6
456GC435
MACK
7.6
No Model
464
L6
456-GC-5138
MACK
12.0
E7
728
L6
89-02
456-GC-5140
MACK
12.0
E7
728
L6
89-02
456GC517
MACK
7.2
No Model
438
L6
456GC517
MACK
7.6
No Model
464
L6
456GC517A
MACK
7.2
No Model
438
L6
456GC517A
MACK
7.6
No Model
464
L6
456GC518A
MACK
11.0
E6
672
L6
456GC518A
MACK
11.6
No Model
707
L6
456GC518A
MACK
11.6
No Model
707
L6
456GC518E
MACK
11.0
E6
672
L6
456GC518E
MACK
11.6
No Model
707
L6
456GC518E
MACK
11.6
No Model
707
L6
456GC518F
MACK
11.0
E6
672
L6
575
VIN
CID Cyl
Year
61-68
83-86
58-89
58-89
58-89

Casting
Manufacturer
Liter
Model
456GC518F
MACK
11.6
No Model
707
L6
456GC518F
MACK
11.6
No Model
707
L6
456GC519
MACK
8.4
No Model
510
L6
456GC519
MACK
8.8
No Model
540
L6
456GC543
MACK
11.0
E6
672
L6
456GC543
MACK
11.6
No Model
707
L6
456GC543
MACK
11.6
No Model
707
L6
456GC545
MACK
11.0
E6
672
L6
456GC545
MACK
11.6
No Model
707
L6
456GC545
MACK
11.6
No Model
707
L6
456GCF586
MACK
11.0
E6
672
L6
58-89
4577
GM
5.4
No Model
327
V8
62-67
45771DD
NAVISTAR
4.1
250
L6
45853D
HERCULES
3.7
D2300
226
L4
45853D
HERCULES
3.7
D-2300
226
L4
45853D
HERCULES
3.7
D-2300
226
L4
45853D
HERCULES
3.8
No Model
232
L6
45853D
HERCULES
4.0
No Model
245
L6
45853D
HERCULES
4.3
JXB
263
L6
45853D
HERCULES
4.6
No Model
282
L6
45853D
HERCULES
5.2
No Model
320
L6
45853E
HERCULES
3.7
D2300
226
L4
45853E
HERCULES
3.7
D-2300
226
L4
45853E
HERCULES
3.7
D-2300
226
L4
45853E
HERCULES
3.8
No Model
232
L6
45853E
HERCULES
4.0
No Model
242
L6
45853E
HERCULES
4.3
JXB
263
L6
45853E
HERCULES
4.6
No Model
282
L6
45853E
HERCULES
5.2
No Model
320
L6
45855E
HERCULES
3.7
D2300
226
L4
45855E
HERCULES
3.7
D-2300
226
L4
45855E
HERCULES
3.7
D-2300
226
L4
45855E
HERCULES
3.8
No Model
232
L6
45855E
HERCULES
4.0
No Model
245
L6
45855E
HERCULES
4.3
JXB
263
L6
45855E
HERCULES
4.6
No Model
282
L6
45855E
HERCULES
5.2
No Model
320
L6
45857E
HERCULES
3.7
D2300
226
L4
45857E
HERCULES
3.7
D-2300
226
L4
45857E
HERCULES
3.7
D-2300
226
L4
45857E
HERCULES
3.8
No Model
232
L6
45857E
HERCULES
4.0
No Model
245
L6
45857E
HERCULES
4.3
JXB
263
L6
45857E
HERCULES
4.6
No Model
282
L6
45857E
HERCULES
5.2
No Model
320
L6
45859B
HERCULES
3.7
D2300
226
L4
45859B
HERCULES
3.7
D-2300
226
L4
45859B
HERCULES
3.7
D-2300
226
L4
45859B
HERCULES
3.8
No Model
232
L6
45859B
HERCULES
4.0
No Model
245
L6
45859B
HERCULES
4.3
JXB
263
L6
45859B
HERCULES
4.6
No Model
282
L6
45859B
HERCULES
5.2
No Model
320
L6
45859D
HERCULES
3.7
D2300
226
L4
45859D
HERCULES
3.7
D-2300
226
L4
45859D
HERCULES
3.7
D-2300
226
L4
45859D
HERCULES
3.8
No Model
232
L6
45859D
HERCULES
4.0
No Model
245
L6
45859D
HERCULES
4.3
JXB
263
L6
576
VIN
JXC
JXC
JXC
JXC
JXC
JXC
JXC
JXC
JXC
JXC
CID Cyl
Year
58-89
58-89

Casting
Manufacturer
Liter
Model
45859D
HERCULES
4.6
No Model
45859D
HERCULES
5.2
No Model
458686
HERCULES
2.7
458686
HERCULES
458686
VIN
CID Cyl
Year
282
L6
320
L6
JX4E-3
164
L4
2.7
JX4E-5
164
L4
HERCULES
3.1
JX4C-3
188
L4
458686
HERCULES
3.1
JX4C-5
188
L4
458686
HERCULES
3.1
No Model
191
L6
458686
HERCULES
3.1
No Model
191
L6
458686
HERCULES
3.3
JX4L-C3
199
L4
458686
HERCULES
3.3
JX4L-C5
199
L4
458686
HERCULES
3.3
JX4L-CER
199
L4
458686
HERCULES
3.5
JX4D-3
214
L4
458686
HERCULES
3.7
JX4L-D3
226
L4
458686
HERCULES
3.7
JX4L-D5
226
L4
458686
HERCULES
3.7
JX4L-DER
226
L4
458686
HERCULES
5.2
JX4D-5
320
L4
45868G
HERCULES
3.7
D2300
226
L4
45868G
HERCULES
3.7
D-2300
226
L4
45868G
HERCULES
3.7
D-2300
226
L4
45868G
HERCULES
3.8
No Model
232
L6
45868G
HERCULES
4.0
No Model
245
L6
45868G
HERCULES
4.3
JXB
263
L6
45868G
HERCULES
4.6
No Model
282
L6
45868G
HERCULES
5.2
No Model
JXC
320
L6
45-T
CHRYSLER
2.4
COLT VISTA
143
L4
90-92
45-T
HYUNDAI
2.4
SONATA
143
L4
89-93
45-T
MITSUBISHI
2.4
No Model
143
L4
85-86
45-T
MITSUBISHI
2.4
No Model
143
L4
89-92
45-T
MITSUBISHI
2.4
VAN
143
L4
87-88
46011-A
WAUKESHA
0.0
6LROR
L6
46024F
HERCULES
3.7
D2300
226
L4
46024F
HERCULES
3.7
D-2300
226
L4
46024F
HERCULES
3.7
D-2300
226
L4
46024F
HERCULES
3.8
No Model
232
L6
46024F
HERCULES
4.0
No Model
245
L6
46024F
HERCULES
4.3
JXB
263
L6
46024F
HERCULES
4.6
No Model
282
L6
46024F
HERCULES
5.2
No Model
JXC
320
L6
460407
GM
4.1
No Model
250
L6
77-78
460407
GM
4.1
No Model
250
L6
78-80
460407
GM
4.1
No Model
250
L6
81-85
460407
GM
4.1
No Model
250
L6
66-75
460407
MERCRUISER
4.1
No Model
MIE
250
L6
66-75
4618
GM
2.2
CAVALIER
134
L4
91-94
4618
GM
2.2
CAVALIER
134
L4
91-94
4618
GM
2.2
CAVALIER
134
L4
94-97
4618
GM
2.2
CAVALIER
134
L4
98-02
4620
GM
2.4
ACHIEVA
146
L4
96-02
4621916
CHRYSLER
2.4
CARAVAN
146
L4
96-04
46402D
NAVISTAR
1.9
No Model
113
L4
37-40
46402D
NAVISTAR
2.0
SUPER C
123
L4
46402D
NAVISTAR
2.2
F-12
132
L4
46402DB
NAVISTAR
1.9
No Model
113
L4
37-40
46402DB
NAVISTAR
4.4
U, B, BD
269
L6
40-69
464398
WHITE
4.7
No Model
288
L6
464398
WHITE
6.0
No Model
366
L6
464398
WHITE
6.4
No Model
390
L6
464810
WHITE
4.1
No Model
252
L6
464810
WHITE
4.4
270
270
JXC
JXC
JXC
FL
577

Casting
Manufacturer
Liter
Model
464810
WHITE
4.9
No Model
300
L6
464810
WHITE
5.5
No Model
336
L6
466766C
NAVISTAR
6.6
No Model
MV
404
V8
80-86
466766C1
NAVISTAR
6.6
No Model
MV
404
V8
80-86
4667755
CHRYSLER
2.0
AVENGER
122
L4
95-04
4667755
CHRYSLER
2.0
NEON
122
L4
95-04
4667755
MITSUBISHI
2.0
ECLIPSE
122
L4
95-99
467
ALLIS CHALMERS
2.5
160
152
L3
467
PERKINS
2.5
152
152
L3
467
PERKINS
2.5
152
D(2)
152
L3
467
PERKINS
2.5
152
D(3)
152
L3
4670001
IVECO
9.8
8205
599
L6
4670001
IVECO
10.3
8205
629
4672
GM
5.0
No Model
307
307
V8
68-73
4672
GM
5.4
No Model
327
V8
68-69
46827E
HERCULES
3.1
No Model
191
L6
46827E
HERCULES
3.1
No Model
191
L6
46827E
HERCULES
3.1
QXA-3
190
L6
46827E
HERCULES
3.1
QXA-5
190
L6
46827E
HERCULES
3.4
QXB-3
205
L6
46827E
HERCULES
3.4
QXB-5
205
L6
46827E
HERCULES
3.6
QXC-3
221
L6
46827E
HERCULES
3.6
QXC-5
221
L6
46827E
HERCULES
3.8
QXD-3
230
L6
46827E
HERCULES
3.8
QXD-5
230
L6
46827E
HERCULES
3.9
QXLD-3
237
L6
46827E
HERCULES
3.9
QXLD-5
237
L6
46827E
HERCULES
3.9
QXLDER-3
237
L6
46827E
HERCULES
3.9
QXLDER-5
237
L6
46828E
HERCULES
3.1
No Model
191
L6
46828E
HERCULES
3.1
No Model
191
L6
46828E
HERCULES
3.1
QXA-3
190
L6
46828E
HERCULES
3.1
QXA-5
190
L6
46828E
HERCULES
3.4
QXB-3
205
L6
46828E
HERCULES
3.4
QXB-5
205
L6
46828E
HERCULES
3.6
QXC-3
221
L6
46828E
HERCULES
3.6
QXC-5
221
L6
46828E
HERCULES
3.8
QXD-3
230
L6
46828E
HERCULES
3.8
QXD-5
230
L6
46828E
HERCULES
3.9
QXLD-3
237
L6
46828E
HERCULES
3.9
QXLD-5
237
L6
46828E
HERCULES
3.9
QXLDER-3
237
L6
46828E
HERCULES
3.9
QXLDER-5
237
L6
46829B
HERCULES
3.1
No Model
191
L6
46829B
HERCULES
3.1
No Model
191
L6
46829B
HERCULES
3.1
QXA-3
190
L6
46829B
HERCULES
3.1
QXA-5
190
L6
46829B
HERCULES
3.4
QXB-3
205
L6
46829B
HERCULES
3.4
QXB-5
205
L6
46829B
HERCULES
3.6
QXC-3
221
L6
46829B
HERCULES
3.6
QXC-5
221
L6
46829B
HERCULES
3.8
QXD-3
230
L6
46829B
HERCULES
3.8
QXD-5
230
L6
46829B
HERCULES
3.9
QXLD-3
237
L6
46829B
HERCULES
3.9
QXLD-5
237
L6
46829B
HERCULES
3.9
QXLDER-3
237
L6
46829B
HERCULES
3.9
QXLDER-5
237
L6
46831E
HERCULES
3.1
No Model
191
L6
46831E
HERCULES
3.1
No Model
191
L6
578
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
46831E
HERCULES
3.1
QXA-3
190
L6
46831E
HERCULES
3.1
QXA-5
190
L6
46831E
HERCULES
3.4
QXB-3
205
L6
46831E
HERCULES
3.4
QXB-5
205
L6
46831E
HERCULES
3.6
QXC-3
221
L6
46831E
HERCULES
3.6
QXC-5
221
L6
46831E
HERCULES
3.8
QXD-3
230
L6
46831E
HERCULES
3.8
QXD-5
230
L6
46831E
HERCULES
3.9
QXLD-3
237
L6
46831E
HERCULES
3.9
QXLD-5
237
L6
46831E
HERCULES
3.9
QXLDER-3
237
L6
46831E
HERCULES
3.9
QXLDER-5
237
L6
46839E
HERCULES
3.9
QXLD-3
237
L6
46839E
HERCULES
3.9
QXLD-5
237
L6
46839E
HERCULES
3.9
QXLDER-3
237
L6
46839E
HERCULES
3.9
QXLDER-5
237
L6
46923D
NAVISTAR
4.1
248
L4
46923D
NAVISTAR
4.3
400
264
L6
63-74
46923D
NAVISTAR
4.6
UTD282
282
L6
53-70
47011A
WAUKESHA
47.4
LRD
2894
L6
47011A
WAUKESHA
47.4
LRO
2894
L6
47011A
WAUKESHA
47.4
No Model
2894
L6
47011A
WAUKESHA
47.4
No Model
2894
L6
47011A
WAUKESHA
57.7
LRZ
3520
L6
47011-A
WAUKESHA
0.0
6LRZ
L6
47011B
WAUKESHA
47.4
LRD
2894
L6
47011B
WAUKESHA
47.4
LRO
2894
L6
47011B
WAUKESHA
47.4
No Model
2894
L6
47011B
WAUKESHA
47.4
No Model
2894
L6
47011B
WAUKESHA
57.7
LRZ
3520
L6
47111
WAUKESHA
0.0
6LRZ
L6
47111-B
WAUKESHA
0.0
6LRZ
L6
4732610
CHRYSLER
5.3
No Model
326
V8
55-57
4737
GM
3.8
No Model
231
V6
92-94
4737
GM
3.8
No Model
231
V6
95-05
4737
GM
3.8
No Model
231
V6
88-91
4737
GM
3.8
No Model
231
V6
91-94
477440
GM
6.1
No Model
371
V8
57-60
477440
GM
6.1
No Model
370
370
V8
57-58
477440
GM
6.5
No Model
OLDS
394
V8
59-64
4781590AA
CHRYSLER
2.4
CIRRUS
148
L4
95-05
4783
CUMMINS
4.1
No Model
251
L4
47830D
HERCULES
3.1
No Model
191
L6
47830D
HERCULES
3.1
No Model
191
L6
47830D
HERCULES
3.1
QXA-3
190
L6
47830D
HERCULES
3.1
QXA-5
190
L6
47830D
HERCULES
3.4
QXB-3
205
L6
47830D
HERCULES
3.4
QXB-5
205
L6
47830D
HERCULES
3.6
QXC-3
221
L6
47830D
HERCULES
3.6
QXC-5
221
L6
47830D
HERCULES
3.8
QXD-3
230
L6
47830D
HERCULES
3.8
QXD-5
230
L6
47830D
HERCULES
3.9
QXLD-3
237
L6
47830D
HERCULES
3.9
QXLD-5
237
L6
47830D
HERCULES
3.9
QXLDER-3
237
L6
47830D
HERCULES
3.9
QXLDER-5
237
L6
47924A8
MACK
6.2
No Model
377
L6
47925C2
MACK
4.8
No Model
290
L6
47925C2
MACK
5.4
No Model
330
L6
579
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
481
GM
2.8
FIERO
481
GM
2.8
No Model
173
V6
85-88
173
V6
481
GM
2.8
No Model
85-92
173
V6
481
GM
2.8
87-89
SONOMA
173
V6
481
ISUZU
86-93
2.8
TROOPER II
173
V6
4813
89-91
GM
5.3
No Model
326
V8
63-67
4813
GM
5.7
No Model
350
V8
68-77
4813
GM
6.6
FIREBIRD
400
V8
67-79
4813
GM
6.6
No Model
400
V8
72-75
4813
GM
6.6
No Model
400
V8
74-75
4813
GM
6.6
No Model
400
V8
75-75
4813
GM
6.6
No Model
400
V8
77-79
481379
GM
6.6
No Model
400
V8
77-79
481380
GM
6.6
No Model
400
V8
72-77
481380
GM
6.6
No Model
400
V8
77-79
4817
GM
3.3
No Model
204
V6
89-93
482762
WHITE
4.7
No Model
288
L6
482762
WHITE
6.0
No Model
366
L6
482762
WHITE
6.4
No Model
390
L6
486
CHRYSLER
2.5
DAKOTA
153
L4
94-95
486
CHRYSLER
2.5
DAKOTA
153
L4
89-92
486
CHRYSLER
2.5
No Model
153
L4
91-95
486
CHRYSLER
2.5
No Model
153
L4
93-95
486178
CHRYSLER
2.5
DAKOTA
153
L4
89-92
48815
GM
3.5
No Model
OLD
206
L6
29-38
4887755
CHRYSLER
2.0
AVENGER
122
L4
95-04
4894
MAZDA
1.5
No Model
UA
90
L4
70-79
490642
WHITE
7.4
No Model
452
L6
490642
WHITE
7.4
No Model
452
L6
49123
HERCULES
4.0
No Model
242
L6
49123
HERCULES
4.3
JXB
263
L6
49123
HERCULES
5.6
WXC
339
L6
49123
HERCULES
5.9
No Model
361
L6
49123
HERCULES
6.3
No Model
383
L6
491423
WHITE
7.0
No Model
427
L6
491423
WHITE
7.4
No Model
452
L6
491423
WHITE
7.4
No Model
452
L6
491423
WHITE
8.3
No Model
504
L6
491423
WHITE
8.7
No Model
532
L6
49525B
HERCULES
3.9
QXLD-3
237
L6
49525B
HERCULES
3.9
QXLD-5
237
L6
49525B
HERCULES
3.9
QXLDER-3
237
L6
49525B
HERCULES
3.9
QXLDER-5
237
L6
49528E
HERCULES
3.9
QXLD-3
237
L6
49528E
HERCULES
3.9
QXLD-5
237
L6
49528E
HERCULES
3.9
QXLDER-3
237
L6
49528E
HERCULES
3.9
QXLDER-5
237
L6
496452
GM
5.7
No Model
350
V8
496452
GM
5.7
No Model
350
V8
74
496452
GM
5.7
No Model
350
V8
68-77
496452
GM
6.6
FIREBIRD
400
V8
67-79
496452
GM
6.6
No Model
400
V8
72-75
496452
GM
6.6
No Model
400
V8
74-75
496452
GM
6.6
No Model
400
V8
75-75
496452
GM
6.6
No Model
400
V8
72-77
496452
GM
6.6
No Model
400
V8
77-79
496452
GM
6.6
No Model
400
V8
77-79
496453
GM
7.5
No Model
455
V8
70-76
496453
GM
7.5
No Model
455
V8
71-76
580
VIN
49-54
70-75

Casting
Manufacturer
Liter
CID Cyl
Year
496453
GM
7.5
No Model
X&Y
499
CHRYSLER
1.7
ALLIANCE
455
V8
71-76
105
L4
499
RENAULT
1.7
No Model
85-87
105
L4
499311
CHRYSLER
2.5
85-87
No Model
151
L4
499311
CHRYSLER
81-83
2.5
No Model
151
L4
499311
81-83
GM
2.5
No Model
151
L4
77-79
499311
GM
2.5
No Model
151
L4
78-80
4993111
CHRYSLER
2.5
No Model
151
L4
81-83
4993111
CHRYSLER
2.5
No Model
151
L4
81-83
4993111
GM
2.5
No Model
151
L4
77-79
4993111
GM
2.5
No Model
151
L4
79-79
4993111
GM
2.5
No Model
151
L4
78-80
499587
GM
4.1
TORPEDO
PONT
249
L8
37-49
4A
GM
1.6
NOVA
97
L4
85-88
4A
TOYOTA
1.5
TERCEL
3A
89
L4
80-86
4A
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
4A
TOYOTA
1.6
COROLLA
4A-C
97
L4
83-87
4A
TOYOTA
1.6
COROLLA
4A-LC
97
L4
87-88
4AC
TOYOTA
1.5
TERCEL
3A
89
L4
80-86
4AC
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
4AC
TOYOTA
1.6
COROLLA
4A-C
97
L4
83-87
4AC
TOYOTA
1.6
COROLLA
4A-LC
97
L4
87-88
4AL
TOYOTA
1.5
TERCEL
3A
89
L4
80-86
4AL
TOYOTA
1.5
TERCEL
3A-C
89
L4
81-88
4B
TOYOTA
2.0
CELICA
3SGEL
122
L4
86-89
4B-2311
CATERPILLAR
0.9
No Model
54
L2
4B-2405
CATERPILLAR
0.9
No Model
54
L2
4B-903
CATERPILLAR
0.6
STARTING MOTOR
36
L2
4F2E-AA
FORD
3.9
FREESTAR
238
V6
4F8510
CATERPILLAR
13.6
D339
831
L4
4F-8510
CATERPILLAR
13.6
7700
831
L4
4F8511
CATERPILLAR
20.4
D342
1246
L6
4F8511
CATERPILLAR
20.4
D342
1246
L6
4F8511
CATERPILLAR
20.4
D342
1246
L6
4F8511
CATERPILLAR
20.4
D342
1246
L6
4F8511
CATERPILLAR
20.4
D342
1246
L6
4F8511
CATERPILLAR
20.4
D8
1246
L6
4F8511
CATERPILLAR
20.4
D8
1246
L6
4F8511
CATERPILLAR
20.4
D8
1246
L6
4F-8511
CATERPILLAR
16.3
No Model
992
L6
4F-8511
CATERPILLAR
20.4
13000
1246
L6
4F9352
CATERPILLAR
13.6
D339
831
L4
4F9352
CATERPILLAR
13.6
D339
831
L4
4F9352
CATERPILLAR
13.6
D339
831
L4
4F9352
CATERPILLAR
13.6
D339
831
L4
4F9352
CATERPILLAR
13.6
D339
831
L4
4F9352
CATERPILLAR
13.6
D7
831
L4
4F9352
CATERPILLAR
13.6
D7
831
L4
4F-9623
CATERPILLAR
13.6
7700
831
L4
4G1
CHRYSLER
1.5
COLT
91
L4
89-90
4G1
HYUNDAI
1.5
EXCEL
90
L4
86-89
4G1
HYUNDAI
1.5
EXCEL
90
L4
90-94
4G1
MITSUBISHI
1.5
MIRAGE
90
L4
89-90
4G-3
CHRYSLER
1.8
COLT
107
L4
93-94
4G-3
CHRYSLER
1.8
COLT
107
L4
89-93
4G-3
MITSUBISHI
1.8
ECLIPSE
107
L4
93-94
4G61
CHRYSLER
1.6
No Model
98
L4
85-89
4G61
MITSUBISHI
1.6
MIRAGE
98
L4
89-90
4H5450
CATERPILLAR
D339
831
L4
13.6
Model
581
VIN
04-05

Casting
Manufacturer
Liter
Model
VIN
4H5450
CATERPILLAR
13.6
D339
831
L4
4H5450
CATERPILLAR
13.6
D339
831
L4
4H5450
CATERPILLAR
13.6
D7
831
L4
4H7032
CATERPILLAR
20.4
D342
1246
L6
4H7032
CATERPILLAR
20.4
D342
1246
L6
4H7032
CATERPILLAR
20.4
D342
1246
L6
4H7032
CATERPILLAR
20.4
D342
1246
L6
4H7032
CATERPILLAR
20.4
D342
1246
L6
4H7032
CATERPILLAR
20.4
D8
1246
L6
4H7032
CATERPILLAR
20.4
D8
1246
L6
4H7032
CATERPILLAR
20.4
D8
1246
L6
4H-7032
CATERPILLAR
16.3
No Model
992
L6
4H-7032
CATERPILLAR
20.4
13000
1246
L6
4H-9591
CATERPILLAR
24.1
353
1473
L6
4H-9591
CATERPILLAR
24.1
D9
1473
L6
4K
TOYOTA
1.3
STARLETT
4K-E
79
L4
83-84
4K
TOYOTA
1.3
STARLETT
4K-E
79
L4
83-84
4K05
CHRYSLER
2.0
AVENGER
122
L4
95-04
4K05
CHRYSLER
2.0
NEON
122
L4
95-04
4K05
MITSUBISHI
2.0
ECLIPSE
122
L4
95-99
4L3771
CATERPILLAR
48.3
398
4L3771
CATERPILLAR
48.8
D398
4M
FORD
5.8
No Model
4M
TOYOTA
2.6
No Model
4M
4M0447
CATERPILLAR
20.4
D342
4M0447
CATERPILLAR
20.4
4M0447
CATERPILLAR
20.4
4M0447
CATERPILLAR
4M0447
C/B
CID Cyl
Year
2946
V 12
2976
V 12
351
V8
70-74
156
L6
73-79
1246
L6
D342
1246
L6
D342
1246
L6
20.4
D342
1246
L6
CATERPILLAR
20.4
D342
1246
L6
4M447
CATERPILLAR
20.4
D8
1246
L6
4M447
CATERPILLAR
20.4
D8
1246
L6
4M447
CATERPILLAR
20.4
D8
1246
L6
4M8137
CATERPILLAR
14.6
1693
893
L6
4M8137
CATERPILLAR
14.6
1693
893
L6
4M8137
CATERPILLAR
14.6
1693
893
L6
4M8137
CATERPILLAR
14.6
1693
893
L6
4M8137
CATERPILLAR
14.6
1693
893
L6
4M8137
CATERPILLAR
14.6
343
893
L6
4M8137
CATERPILLAR
14.6
D343
893
L6
4M8137
CATERPILLAR
14.6
D343
893
L6
4M8137
CATERPILLAR
14.6
G343
893
L6
4M-9352
CATERPILLAR
13.6
7700
831
L4
4M9950
CATERPILLAR
5.7
D330
CB
350
L4
4M9950
CATERPILLAR
5.7
D330
D4
350
L4
4M-9950
CATERPILLAR
5.1
No Model
312
L4
4M9960
CATERPILLAR
5.7
D330
CB
350
L4
4M9960
CATERPILLAR
5.7
D330
D4
350
L4
4M9960
CATERPILLAR
7.0
D330C
CB
425
L4
4M9960
CATERPILLAR
7.0
D330C
SP
425
L4
4MA
FORD
5.8
No Model
351
V8
70-74
4MAB
FORD
5.8
No Model
351
V8
70-74
4N
ISUZU
2.2
D201
136
L4
4N0006
CATERPILLAR
14.6
3406
893
L6
4N0006
CATERPILLAR
14.6
3406
893
L6
4N0006
CATERPILLAR
14.6
3406
SP
893
L6
4N0008
CATERPILLAR
18.0
3408
1099
V8
4N0008
CATERPILLAR
18.0
D8L
1099
V8
4N0012
CATERPILLAR
27.0
3412
1649
V 12
4N0111
CATERPILLAR
5.2
3204
582
DI
318
L4

Casting
Manufacturer
Liter
Model
4N0111
CATERPILLAR
5.2
3204
DI(2)
318
L4
4N0111
CATERPILLAR
5.2
3204
PC
318
L4
4N1111
CATERPILLAR
5.2
3204
DI
318
L4
4N1111
CATERPILLAR
5.2
3204
DI(2)
318
L4
4N1111
CATERPILLAR
5.2
3204
PC
318
L4
4N7692
CATERPILLAR
7.0
3304
DI
425
L4
4N7693
CATERPILLAR
10.5
3306
CB
638
L6
4N7693
CATERPILLAR
10.5
3306
DI
638
L6
4N7693
CATERPILLAR
10.5
3306
SP
638
L6
4N7693
CATERPILLAR
10.5
3306
SP
638
L6
4N7693
CATERPILLAR
10.5
3306
SP
638
L6
4N7694
CATERPILLAR
7.0
3304
CB
425
L4
4N7694
CATERPILLAR
7.0
3304
DI
425
L4
4N7694
CATERPILLAR
7.0
3304
SP
425
L4
4N7694
CATERPILLAR
7.0
D330C
CB
425
L4
4N7694
CATERPILLAR
7.0
D330C
SP
425
L4
4N7696
CATERPILLAR
8.6
1673
CB
525
L6
4N7696
CATERPILLAR
8.6
D333
CB
525
L6
4N7696
CATERPILLAR
10.5
1673C
CB
638
L6
4N7696
CATERPILLAR
10.5
1673C
SP
638
L6
4N7696
CATERPILLAR
10.5
3306
CB
638
L6
4N7696
CATERPILLAR
10.5
3306
DI
638
L6
4N7696
CATERPILLAR
10.5
3306
SP
638
L6
4N7696
CATERPILLAR
10.5
3306
SP
638
L6
4N7696
CATERPILLAR
10.5
3306
SP
638
L6
4N7696
CATERPILLAR
10.5
334
638
L6
4N7696
CATERPILLAR
10.5
D333C
CB
638
L6
4N7696
CATERPILLAR
10.5
D333C
SP
638
L6
4N8453
CATERPILLAR
10.4
3208
636
V8
4N8453
CATERPILLAR
10.4
3208
636
V8
4N8453
CATERPILLAR
10.4
3208
636
V8
4N8453
CATERPILLAR
10.4
3208
TURBO
636
V8
4N8454
CATERPILLAR
10.4
3208
636
V8
4N8454
CATERPILLAR
10.4
3208
636
V8
4N8454
CATERPILLAR
10.4
3208
636
V8
4N8454
CATERPILLAR
10.4
3208
TURBO
636
V8
4P2612
CATERPILLAR
51.8
3512
3158
V 12
4P2616
CATERPILLAR
69.0
3516
4210
V 16
4P5121
CATERPILLAR
6.6
3116
403
L6
89-95
4P5121
CATERPILLAR
7.2
3126
439
L6
95-02
4P5121
CATERPILLAR
7.2
3126B
439
L6
4P5122
CATERPILLAR
4.4
3114
269
L4
89-94
4P9121
CATERPILLAR
14.6
3406
893
L6
91-95
4P9121
CATERPILLAR
14.6
3406
893
L6
93-05
4S5644
CATERPILLAR
14.6
1693
893
L6
4S5644
CATERPILLAR
14.6
1693
893
L6
4S5644
CATERPILLAR
14.6
1693
893
L6
4S5644
CATERPILLAR
14.6
1693
893
L6
4S5644
CATERPILLAR
14.6
1693
893
L6
4S5644
CATERPILLAR
14.6
343
893
L6
4S5644
CATERPILLAR
14.6
D343
893
L6
4S5644
CATERPILLAR
14.6
D343
893
L6
4S5644
CATERPILLAR
14.6
G343
893
L6
4S7406
CATERPILLAR
20.4
D342
1246
L6
4S7406
CATERPILLAR
20.4
D342
1246
L6
4S7406
CATERPILLAR
20.4
D342
1246
L6
4S7406
CATERPILLAR
20.4
D342
1246
L6
4S7406
CATERPILLAR
20.4
D342
1246
L6
4S7406
CATERPILLAR
20.4
D8
1246
L6
583
VIN
CID Cyl
Year
87-92
87-92

Casting
Manufacturer
Liter
Model
4S7406
CATERPILLAR
20.4
D8
1246
L6
4S7406
CATERPILLAR
20.4
D8
1246
L6
4S7406
CATERPILLAR
20.4
D8K
1246
L6
4S7406
CATERPILLAR
20.4
D8K
1246
L6
4S7406
CATERPILLAR
20.4
G342
1246
L6
4S7406
CATERPILLAR
20.4
G342
1246
L6
4S7414
CATERPILLAR
13.6
D339
831
L4
4S7414
CATERPILLAR
13.6
D339
831
L4
4S7414
CATERPILLAR
13.6
D7
831
L4
4S9284
CATERPILLAR
11.5
1676
700
V8
4S9284
CATERPILLAR
11.5
D336
700
V8
4S9284
CATERPILLAR
13.6
D339
831
L4
4S9284
CATERPILLAR
13.6
D339
831
L4
4S9284
CATERPILLAR
13.6
D339
831
L4
4S9284
CATERPILLAR
13.6
D7
831
L4
4S9285
CATERPILLAR
11.5
1676
700
V8
4S9285
CATERPILLAR
11.5
D336
700
V8
4T95J
YANMAR
3.1
4T95
190
L4
4U
FORD
7.0
No Model
429
V8
68-73
4UA
FORD
7.0
No Model
429
V8
68-73
4UAB
FORD
7.0
No Model
429
V8
68-73
4W7612
CATERPILLAR
48.3
398
2946
V 12
4W7612
CATERPILLAR
48.8
D398
2976
V 12
4W7716
CATERPILLAR
64.4
D399
3928
V 16
4XC1-U
ISUZU
1.5
I-MARK
90
L4
85-88
4XC1-U
ISUZU
1.5
No Model
90
L4
85-89
4XCIU
GM
1.5
SPECTRUM
92
L4
87-89
4XCIU
GM
1.5
SPECTRUM
92
L4
87-89
4XCIU
GM
1.5
SPECTRUM
90
L4
86-88
4XCU
GM
1.5
SPECTRUM
92
L4
87-89
4XCU
GM
1.5
SPECTRUM
92
L4
87-89
4XCU
GM
1.5
SPECTRUM
90
L4
86-88
4XC-U
ISUZU
1.5
I-MARK
90
L4
85-88
4XC-U
ISUZU
1.5
No Model
90
L4
85-89
4XCUT
GM
1.5
SPECTRUM
92
L4
87-89
4XCUT
GM
1.5
SPECTRUM
92
L4
87-89
4XC-UT
ISUZU
1.5
I-MARK
90
L4
85-88
4XC-UT
ISUZU
1.5
No Model
90
L4
85-89
4ZE1
ISUZU
2.6
AMIGO
156
L4
88-98
5E
TOYOTA
2.4
No Model
22R
144
L4
81-84
5000094
GM
3.7
No Model
PONT
223
L6
37-38
5000133885
MACK
5.5
MIDR 06.02.12
335
L6
84-89
50024E
HERCULES
3.7
D2300
226
L4
50024E
HERCULES
3.7
D-2300
226
L4
50024E
HERCULES
3.7
D-2300
226
L4
50024E
HERCULES
3.8
No Model
232
L6
50024E
HERCULES
4.0
No Model
245
L6
50024E
HERCULES
4.3
JXB
263
L6
50024E
HERCULES
5.2
No Model
320
L6
501784
GM
3.7
DE LUXE 6
223
L6
39-40
502
GM
3.8
No Model
231
V6
87-88
502
GM
3.8
No Model
231
V6
88
502
GM
3.8
No Model
231
V6
88-91
504
CHRYSLER
2.8
No Model
173
V6
84-87
504
GM
2.8
FIERO
173
V6
85-88
504
GM
2.8
No Model
173
V6
82-85
504
GM
2.8
No Model
173
V6
82-85
504
GM
2.8
No Model
173
V6
79-80
504
GM
2.8
No Model
173
V6
82-85
584
VIN
JXC
JXC
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
504
GM
2.8
No Model
504
GM
2.8
No Model
173
V6
82-85
173
V6
504
GM
2.8
No Model
85-92
173
V6
504
GM
2.8
85-86
No Model
173
V6
504
GM
80-86
2.8
No Model
173
V6
504
80-86
GM
2.8
No Model
173
V6
82-84
506232
GM
4.1
TORPEDO
PONT
249
L8
37-49
508455
GM
4.1
TORPEDO
PONT
249
L8
37-49
508E-6303
FORD
5.4
No Model
330
L6
58-69
50977
NAVISTAR
5.5
WD9, WDR9
335
L4
50977D
NAVISTAR
5.5
TD-9A
335
L4
50977D
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
50977D
NAVISTAR
5.5
WD9, WDR9
335
L4
50977D
NAVISTAR
5.7
No Model
350
L4
50977D
NAVISTAR
6.1
W9, TD9
370
L4
50977DA
NAVISTAR
5.5
TD-9A
335
L4
50977DA
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
50977DA
NAVISTAR
5.5
WD9, WDR9
335
L4
50977DA
NAVISTAR
5.7
No Model
350
L4
50977DA
NAVISTAR
6.1
W9, TD9
370
L4
50977DCX
NAVISTAR
5.5
TD-9A
335
L4
50977DCX
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
50977DCX
NAVISTAR
5.5
WD9, WDR9
335
L4
50977DCX
NAVISTAR
5.7
No Model
350
L4
50977DCX
NAVISTAR
6.1
W9, TD9
370
L4
5101588
DDC
12.1
8V-92
736
V8
5106331
DDC
7.0
6-71
426
L6
51103318
DDC
0.9
53
53
L3
51103318
DDC
3.5
4-53
212
L4
5116022
DDC
0.9
53
53
L3
5116022
DDC
1.7
2-53 2V
106
L2
5116022
DDC
1.7
2-53 4V
106
L2
5116029
DDC
0.9
53
53
L3
5116029
DDC
3.5
4-53
212
L4
5116030
DDC
7.0
8V-53
424
V8
5117906
DDC
7.0
6V-71
426
V6
5117906
DDC
7.0
6V-71 2 VALVE
426
V6
5117906
DDC
7.0
6V-71T
426
V6
5117908
DDC
9.3
8V-71
568
V8
5119906
DDC
7.0
6V-71
426
V6
5119906
DDC
7.0
6V-71 2 VALVE
426
V6
5119906
DDC
7.0
6V-71T
426
V6
5119906
DDC
9.3
8V-71
568
V8
5124738
CHRYSLER
2.2
No Model
135
L4
89-90
5124990
CHRYSLER
2.2
No Model
135
L4
86-87
5132942
DDC
2.3
2-71
142
L2
5132942
DDC
2.3
2-71 2V
142
L2
5132942
DDC
2.3
2-71 CROSS-HEAD
142
L2
5132942
DDC
2.3
2-71E
142
L2
5132942
DDC
2.3
2-71M
142
L2
5132942
DDC
2.3
2-71N
142
L2
5132942
DDC
2.3
2-71T
142
L2
513514
GM
4.4
No Model
268
L8
5140079
DDC
5.2
6V-53
318
V6
5144862
DDC
9.1
6V-92
552
V6
5144867
DDC
9.3
8V-71
568
V8
5145942
DDC
39.1
2384
V 16
5146572
DDC
7.0
6V-71
426
V6
5154184
ALLIS CHALMERS
2.3
No Model
142
L4
16V-149
585
VIN
PONT
50-53

Casting
Manufacturer
Liter
Model
5154184
DDC
2.3
2-71
142
L2
5154184
DDC
2.3
2-71 2V
142
L2
5154184
DDC
2.3
2-71 CROSS-HEAD
142
L2
5154184
DDC
2.3
2-71E
142
L2
5154184
DDC
2.3
2-71M
142
L2
5154184
DDC
2.3
2-71N
142
L2
5154184
DDC
2.3
2-71T
142
L2
5154256
DDC
7.0
6-71
426
L6
5154256
DDC
7.0
6-71 2V
426
L6
5154256
DDC
7.0
6-71 CROSS-HEAD
426
L6
5154256
DDC
7.0
6-71E
426
L6
5154256
DDC
7.0
6-71M
426
L6
5154256
DDC
7.0
6-71N
426
L6
5154256
DDC
7.0
6-71T
426
L6
5154701
DDC
4.7
4-71 2VALVE
284
L4
5154701
DDC
4.7
4-71 4VALVE
284
L4
5154701
DDC
4.7
4-71 CROSS-HEAD
284
L4
5154701
DDC
4.7
4-71E
284
L4
5154701
DDC
4.7
4-71M
284
L4
5154701
DDC
4.7
4-71N
284
L4
5154701
DDC
4.7
4-71T
284
L4
5154701B
DDC
7.0
6-71
426
L6
5154701B
DDC
7.0
6-71 2V
426
L6
5154701B
DDC
7.0
6-71 CROSS-HEAD
426
L6
5154701B
DDC
7.0
6-71E
426
L6
5154701B
DDC
7.0
6-71M
426
L6
5154701B
DDC
7.0
6-71N
426
L6
5154701B
DDC
7.0
6-71T
426
L6
5154926
DDC
3.5
3-71
213
L3
5154926
DDC
3.5
3-71 2V
213
L3
5154926
DDC
3.5
3-71 CROSS-HEAD
213
L3
5154926
DDC
3.5
3-71E
213
L3
5154926
DDC
3.5
3-71M
213
L3
5154926
DDC
3.5
3-71N
213
L3
5154926
DDC
3.5
3-71T
213
L3
5154929
DDC
2.3
2-71
142
L2
5154929
DDC
2.3
2-71 2V
142
L2
5154929
DDC
2.3
2-71 CROSS-HEAD
142
L2
5154929
DDC
2.3
2-71E
142
L2
5154929
DDC
2.3
2-71M
142
L2
5154929
DDC
2.3
2-71N
142
L2
5154929
DDC
2.3
2-71T
142
L2
5155255
DDC
2.3
2-71
142
L2
5155255
DDC
2.3
2-71 2V
142
L2
5155255
DDC
2.3
2-71 CROSS-HEAD
142
L2
5155255
DDC
2.3
2-71E
142
L2
5155255
DDC
2.3
2-71M
142
L2
5155255
DDC
2.3
2-71N
142
L2
5155255
DDC
2.3
2-71T
142
L2
5155255
DDC
7.0
6-71
426
L6
5155255
DDC
7.0
6-71 2V
426
L6
5155255
DDC
7.0
6-71 CROSS-HEAD
426
L6
5155255
DDC
7.0
6-71E
426
L6
5155255
DDC
7.0
6-71M
426
L6
5155255
DDC
7.0
6-71N
426
L6
5155255
DDC
7.0
6-71T
426
L6
5160034
DDC
7.0
6-71
426
L6
5160034
DDC
7.0
6-71 2V
426
L6
5160034
DDC
7.0
6-71 CROSS-HEAD
426
L6
586
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
5160034
DDC
7.0
6-71E
426
L6
5160034
DDC
7.0
6-71M
426
L6
5160034
DDC
7.0
6-71N
426
L6
5160034
DDC
7.0
6-71T
426
L6
5173988
DDC
7.0
6-71
426
L6
5173988
DDC
7.0
6-71 2V
426
L6
5173988
DDC
7.0
6-71 CROSS-HEAD
426
L6
5173988
DDC
7.0
6-71E
426
L6
5173988
DDC
7.0
6-71M
426
L6
5173988
DDC
7.0
6-71N
426
L6
5173988
DDC
7.0
6-71T
426
L6
5173990
DDC
7.0
6-71 2V
426
L6
5173998
DDC
2.3
2-71
142
L2
5173998
DDC
2.3
2-71 2V
142
L2
5173998
DDC
2.3
2-71 CROSS-HEAD
142
L2
5173998
DDC
2.3
2-71E
142
L2
5173998
DDC
2.3
2-71M
142
L2
5173998
DDC
2.3
2-71N
142
L2
5173998
DDC
2.3
2-71T
142
L2
5173998
DDC
7.0
6-71 2V
426
L6
5173998
DDC
7.0
6-71 CROSS-HEAD
426
L6
5173998
DDC
7.0
6-71E
426
L6
5173998
DDC
7.0
6-71M
426
L6
5173998
DDC
7.0
6-71N
426
L6
5173998
DDC
7.0
6-71T
426
L6
517497
DDC
10.8
No Model
660
L6
5179067
DDC
2.3
2-71
142
L2
5179067
DDC
2.3
2-71 2V
142
L2
5179067
DDC
2.3
2-71 CROSS-HEAD
142
L2
5179067
DDC
2.3
2-71E
142
L2
5179067
DDC
2.3
2-71M
142
L2
5179067
DDC
2.3
2-71N
142
L2
5179067
DDC
2.3
2-71T
142
L2
5179067
DDC
7.0
6-71
426
L6
5179067
DDC
7.0
6-71 2V
426
L6
5179067
DDC
7.0
6-71 CROSS-HEAD
426
L6
5179067
DDC
7.0
6-71E
426
L6
5179067
DDC
7.0
6-71M
426
L6
5179067
DDC
7.0
6-71N
426
L6
5179067
DDC
7.0
6-71T
426
L6
518047
GM
4.7
CHIEFTAN
287
V8
55-55
518047
GM
5.2
CHIEFTAIN
316
V8
56-56
5181377
DDC
0.9
53
53
L3
5181377
DDC
3.5
4-53
212
L4
5182940
DDC
7.0
6-71
426
L6
5182940
DDC
7.0
6-71 2V
426
L6
5182940
DDC
7.0
6-71 CROSS-HEAD
426
L6
5182940
DDC
7.0
6-71E
426
L6
5182940
DDC
7.0
6-71M
426
L6
5182940
DDC
7.0
6-71N
426
L6
5182940
DDC
7.0
6-71T
426
L6
5182942
DDC
4.7
4-71 2VALVE
284
L4
5182942
DDC
4.7
4-71 4VALVE
284
L4
5182942
DDC
4.7
4-71 CROSS-HEAD
284
L4
5182942
DDC
4.7
4-71E
284
L4
5182942
DDC
4.7
4-71M
284
L4
5182942
DDC
4.7
4-71N
284
L4
5182942
DDC
4.7
4-71T
284
L4
5184214
DDC
2.3
2-71
142
L2
587
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
5184214
DDC
2.3
2-71 2V
142
L2
5184214
DDC
2.3
2-71 CROSS-HEAD
142
L2
5184214
DDC
2.3
2-71E
142
L2
5184214
DDC
2.3
2-71M
142
L2
5184214
DDC
2.3
2-71N
142
L2
5184214
DDC
2.3
2-71T
142
L2
5184214
DDC
3.5
3-71
213
L3
5184214
DDC
3.5
3-71 2V
213
L3
5184214
DDC
3.5
3-71 CROSS-HEAD
213
L3
5184214
DDC
3.5
3-71E
213
L3
5184214
DDC
3.5
3-71M
213
L3
5184214
DDC
3.5
3-71N
213
L3
5184214
DDC
3.5
3-71T
213
L3
5193990
DDC
7.0
6-71
426
L6
5193990
DDC
7.0
6-71 CROSS-HEAD
426
L6
5193990
DDC
7.0
6-71E
426
L6
5193990
DDC
7.0
6-71M
426
L6
5193990
DDC
7.0
6-71N
426
L6
5193990
DDC
7.0
6-71T
426
L6
52
CHRYSLER
2.0
COLT
MMC
122
L4
75-88
52
CHRYSLER
2.6
No Model
156
L4
78-80
52010
NAVISTAR
4.1
248
L4
52010D
NAVISTAR
4.1
248
L4
52010D
NAVISTAR
4.3
400
264
L6
63-74
52010D
NAVISTAR
4.6
UTD282
282
L6
53-70
52010-D
NAVISTAR
4.3
No Model
264
L4
50-62
52010DA
NAVISTAR
4.1
248
L4
52010DA
NAVISTAR
4.3
400
264
L6
63-74
52010DA
NAVISTAR
4.6
UTD282
282
L6
53-70
52041
LEROI
49.1
No Model
3000
V 12
520427
LEROI
49.1
No Model
3000
V 12
520433
LEROI
49.1
No Model
3000
V 12
52045
LEROI
49.1
No Model
3000
V 12
520451
LEROI
49.1
No Model
3000
V 12
5214490
CHRYSLER
2.2
No Model
135
L4
82-85
5214490
CHRYSLER
2.2
No Model
135
L4
81-82
5214490
CHRYSLER
2.2
No Model
135
L4
83-85
5214490
CHRYSLER
2.2
No Model
135
L4
83-85
5214738
CHRYSLER
2.2
No Model
135
L4
82-85
5214738
CHRYSLER
2.2
No Model
135
L4
91-93
5214738
CHRYSLER
2.2
No Model
135
L4
81-82
5214738
CHRYSLER
2.2
No Model
135
L4
83-85
5214738
CHRYSLER
2.2
No Model
135
L4
90
5214738
CHRYSLER
2.2
No Model
135
L4
83-85
5214738
CHRYSLER
2.2
No Model
135
L4
86-90
5214738
CHRYSLER
2.2
No Model
135
L4
91-94
5214738
CHRYSLER
2.2
No Model
135
L4
83-85
5214738
CHRYSLER
2.2
No Model
135
L4
83-85
5214738
CHRYSLER
2.2
No Model
135
L4
89-90
5214738
CHRYSLER
2.2
SHELBY
135
L4
86-90
5214738
CHRYSLER
2.5
DAKOTA
153
L4
94-95
5214738
CHRYSLER
2.5
DAKOTA
153
L4
89-92
5214830
CHRYSLER
2.2
No Model
135
L4
86-88
5214830
CHRYSLER
2.2
No Model
135
L4
86-90
5214990
CHRYSLER
2.2
No Model
135
L4
86-88
5214990
CHRYSLER
2.2
No Model
135
L4
86-90
5214990
CHRYSLER
2.2
SHELBY
135
L4
86-90
521525
STUDEBAKER
2.7
No Model
170
L6
43-54
521525
STUDEBAKER
2.8
No Model
169
L6
43-54
588
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
521525
STUDEBAKER
2.8
No Model
521526
STUDEBAKER
2.8
No Model
521526
STUDEBAKER
2.8
521601
GM
521601
CID Cyl
Year
170
L6
55-60
170
L6
55-60
No Model
170
L6
55-60
4.7
CHIEFTAN
287
V8
55-55
GM
5.2
CHIEFTAIN
316
V8
56-56
523135
STUDEBAKER
3.7
No Model
224
V8
56-64
523168
STUDEBAKER
4.0
No Model
246
L6
50-60
523206
GM
5.6
CHIEFTAIN
347
V8
57-57
5235
TRIUMPH
1.5
No Model
FH
91
L4
73-80
5235
TRIUMPH
1.5
No Model
FM
91
L4
73-80
523774
STUDEBAKER
3.7
No Model
224
V8
56-64
5245
LEROI
32.8
No Model
2000
V 12
52451
LEROI
32.8
No Model
2000
V 12
524513
LEROI
32.8
No Model
2000
V 12
525887
GM
4.3
No Model
265
V8
80-81
525887
GM
4.9
No Model
301
V8
77-81
525887
GM
4.9
No Model
301
V8
77-81
525887
GM
4.9
No Model
301
V8
79-81
525887
GM
4.9
No Model
301
V8
77-79
526
GM
2.8
FIERO
173
V6
85-88
526
GM
2.8
No Model
173
V6
85-92
526
GM
2.8
No Model
173
V6
87-89
526
GM
2.8
SONOMA
173
V6
86-93
526
ISUZU
2.8
TROOPER II
173
V6
89-91
526602
GM
4.7
CHIEFTAN
287
V8
55-55
526602
GM
5.2
CHIEFTAIN
316
V8
56-56
526831
STUDEBAKER
3.8
No Model
232
V8
51-54
526831
STUDEBAKER
4.2
No Model
259
V8
55-64
526832
STUDEBAKER
3.8
No Model
232
V8
51-54
526832
STUDEBAKER
4.2
No Model
259
V8
55-64
526956
STUDEBAKER
4.7
No Model
289
V8
57-64
526956
STUDEBAKER
5.0
No Model
304
V8
63-64
527456R1
NAVISTAR
1.0
U & UC
60
L4
528
ISUZU
2.8
TROOPER II
173
V6
52809D
NAVISTAR
5.5
TD-9A
335
L4
52809D
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
52809D
NAVISTAR
5.5
WD9, WDR9
335
L4
52809D
NAVISTAR
5.7
No Model
350
L4
52809D
NAVISTAR
6.1
W9, TD9
370
L4
52809DC
NAVISTAR
5.5
TD-9A
335
L4
52809DC
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
52809DC
NAVISTAR
5.5
WD9, WDR9
335
L4
52809DC
NAVISTAR
5.7
No Model
350
L4
52809DC
NAVISTAR
6.1
W9, TD9
370
L4
52809DCX
NAVISTAR
5.5
TD-9A
335
L4
52809DCX
NAVISTAR
5.5
W9, TD-9A, T-9
335
L4
52809DCX
NAVISTAR
5.5
WD9, WDR9
335
L4
52809DCX
NAVISTAR
5.7
No Model
350
L4
52809DCX
NAVISTAR
6.1
W9, TD9
370
L4
528527
GM
5.6
CHIEFTAIN
347
V8
57-57
528527
GM
6.1
No Model
371
V8
57-60
528527
GM
6.1
No Model
370
370
V8
57-58
528527
GM
6.5
No Model
OLDS
394
V8
59-64
528R2-79
NAVISTAR
4.4
510B
268
L4
75-85
5295
LEROI
2.9
No Model
176
L4
5295
LEROI
3.3
No Model
201
L4
52951
LEROI
2.9
No Model
176
L4
52951
LEROI
3.3
No Model
201
L4
52951X
LEROI
2.9
No Model
176
L4
589
VIN
89-91

Casting
Manufacturer
Liter
Model
52951X
LEROI
3.3
No Model
201
L4
5295S4
LEROI
2.9
No Model
176
L4
5295S4
LEROI
3.3
No Model
201
L4
53
CHRYSLER
2.6
No Model
156
L4
78-80
530048
GM
5.6
CHIEFTAIN
347
V8
57-57
530048
GM
6.1
No Model
371
V8
57-60
530048
GM
6.1
No Model
370
370
V8
57-58
530048
GM
6.5
No Model
OLDS
394
V8
59-64
53005823
CHRYSLER
8.0
No Model
488
V 10
94-02
53005840
CHRYSLER
8.0
No Model
488
V 10
94-97
53006840
CHRYSLER
8.0
No Model
488
V 10
94-97
53006840
CHRYSLER
8.0
No Model
488
V 10
94-02
530081
STUDEBAKER
3.8
No Model
232
V8
51-54
530081
STUDEBAKER
4.2
No Model
259
V8
55-64
53010411
CHRYSLER
4.0
No Model
242
L6
91-97
53010411
CHRYSLER
4.0
No Model
242
L6
98-05
53020683
CHRYSLER
4.7
DAKOTA
287
V8
04-06
53020683
CHRYSLER
4.7
DURANGO
287
V8
99-06
53020767
CHRYSLER
4.0
No Model
242
L6
91-97
53020767
CHRYSLER
4.0
No Model
242
L6
98-05
53021300AA
CHRYSLER
5.7
TRUCK
345
V8
03-05
531369
GM
5.3
No Model
326
V8
63-67
531369
GM
6.4
No Model
389
389
V8
59-66
531369
GM
6.6
FIREBIRD
400
V8
67-79
531369
GM
6.6
No Model
400
V8
72-75
531369
GM
6.6
No Model
400
V8
74-75
531369
GM
6.6
No Model
400
V8
75-75
531369
GM
6.6
No Model
400
V8
72-77
531369
GM
6.6
No Model
400
V8
77-79
5325009
HUDSON
4.3
No Model
262
L6
48-52
5330
GM
1.5
SPECTRUM
92
L4
85-87
533439
STUDEBAKER
3.7
No Model
224
V8
56-64
53401D
NAVISTAR
7.5
TD-14
461
L4
53401DC
NAVISTAR
7.5
TD-14
461
L4
534231
STUDEBAKER
2.7
No Model
170
L6
55-64
534231
STUDEBAKER
3.0
No Model
185
L6
55-58
534251
STUDEBAKER
3.0
No Model
185
L6
55-58
534254
STUDEBAKER
2.7
No Model
170
L6
55-64
534254
STUDEBAKER
3.0
No Model
185
L6
55-58
534521
STUDEBAKER
2.7
No Model
170
L6
55-64
534521
STUDEBAKER
3.0
No Model
185
L6
55-58
53522
LEROI
3.7
No Model
226
L4
535377
STUDEBAKER
2.7
No Model
170
L6
55-64
535377
STUDEBAKER
3.0
No Model
185
L6
55-58
5354
LEROI
3.7
No Model
226
L4
53542
LEROI
3.7
No Model
226
L4
53544
LEROI
3.7
No Model
226
L4
536452
STUDEBAKER
3.8
No Model
232
V8
51-54
536452
STUDEBAKER
4.2
No Model
259
V8
55-64
5373
LEROI
2.3
No Model
140
L4
537424
STUDEBAKER
4.7
No Model
289
V8
57-64
537424
STUDEBAKER
5.0
No Model
304
V8
63-64
539000
GM
3.2
TEMPEST
195
L4
61-63
53931
LEROI
13.8
No Model
844
L8
539732
GM
3.2
TEMPEST
195
L4
61-63
540
GM
2.5
No Model
151
L4
87-88
540
GM
2.5
No Model
151
L4
89-91
541585
GM
5.3
No Model
326
V8
63-67
541585
GM
6.6
FIREBIRD
400
V8
67-79
590
VIN
1E
1E
1E
1E
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
541585
GM
6.6
No Model
541585
GM
6.6
No Model
400
V8
72-75
400
V8
541585
GM
6.6
No Model
74-75
400
V8
541585
GM
6.6
75-75
No Model
400
V8
541585
GM
72-77
6.6
No Model
400
V8
542239
77-79
GM
3.2
TEMPEST
195
L4
61-63
542990
GM
6.9
BONNEVILLE
421
V8
61-66
542990
GM
6.9
BONNEVILLE
421
V8
61-66
542990
GM
7.0
No Model
428
V8
67-69
543
GM
2.5
No Model
151
L4
82-86
543
GM
2.5
No Model
151
L4
87-88
543
GM
2.5
No Model
151
L4
89
543
GM
2.5
No Model
151
L4
90-92
543
GM
2.5
S-10
151
L4
91-93
543
GM
2.5
S-10
151
L4
87-91
54401DC
NAVISTAR
7.5
TD-14
461
L4
54401DCX
NAVISTAR
7.5
TD-14
461
L4
544100
GM
3.2
TEMPEST
195
L4
61-63
544191
GM
5.3
No Model
326
V8
63-67
544191
GM
6.4
No Model
389
389
V8
59-66
544191
GM
6.6
FIREBIRD
400
V8
67-79
544191
GM
6.6
No Model
400
V8
72-75
544191
GM
6.6
No Model
400
V8
75-75
544191
GM
6.6
No Model
400
V8
72-77
544191
GM
6.6
No Model
400
V8
77-79
55
CHRYSLER
2.0
COLT
122
L4
90-94
55
CHRYSLER
2.0
TALON
122
L4
90-92
55205
NAVISTAR
4.6
UTD282
282
L6
53-70
555638
GM
5.0
No Model
303.7
304
V8
49-53
555638
GM
5.0
No Model
OLDS
303
V8
49-53
555638
GM
5.3
No Model
324
V8
54-56
555699
GM
5.0
No Model
OLDS
303
V8
49-53
555699
GM
5.3
No Model
324
V8
54-56
555699
GM
5.4
No Model
.7
330
V8
49-53
556607
GM
4.3
No Model
260
V8
75-76
556607
GM
4.3
No Model
260
V8
77-82
556607
GM
4.3
No Model
260
V8
75-76
556607
GM
4.3
No Model
260
V8
77-81
556607
GM
5.0
No Model
307
V8
87-90
556607
GM
5.0
No Model
307
V8
81-88
556607
GM
5.7
No Model
350
V8
80
556607
GM
5.7
No Model
350
V8
78-79
556607
GM
5.7
No Model
350
V8
69-76
556607
GM
5.7
No Model
350
V8
77-80
556607
GM
6.6
No Model
403
V8
77-77
556607
GM
6.6
No Model
403
V8
78-79
556607
GM
6.6
No Model
403
V8
77-81
556708
GM
4.2
No Model
257
L8
37-48
558711
GM
4.3
No Model
262
V8
79-80
558711
GM
5.7
No Model
350
V8
78-80
558711
GM
5.7
No Model
350
V8
81-85
558711
GM
5.7
No Model
350
V8
78-79
558711
GM
5.7
No Model
350
V8
80
558711
GM
5.7
No Model
350
V8
80-81
559432
GM
5.4
No Model
.7
330
V8
49-53
56163M
CASE
11.1
2870
674
L6
56163M
SCANIA
11.1
674
674
L6
561656
GM
5.0
No Model
OLDS
303
V8
49-53
561656
GM
5.3
No Model
324
V8
54-56
591
VIN

Casting
Manufacturer
Liter
Model
561656
GM
5.4
No Model
562746
GM
6.1
No Model
562746
GM
6.1
No Model
562746
GM
6.5
565524
GM
565524
CID Cyl
Year
330
V8
49-53
371
V8
57-60
370
370
V8
57-58
No Model
OLDS
394
V8
59-64
5.0
No Model
OLDS
303
V8
49-53
GM
5.4
No Model
.7
330
V8
49-53
565524DYNA
GM
5.0
No Model
OLDS
303
V8
49-53
565524DYNA
GM
5.4
No Model
.7
330
V8
49-53
565699
GM
6.1
No Model
371
V8
57-60
565699
GM
6.1
No Model
370
370
V8
57-58
565699
GM
6.5
No Model
OLDS
394
V8
59-64
566607
GM
5.0
No Model
307
V8
87-90
566607
GM
5.0
No Model
307
V8
81-88
56711
CUMMINS
11.0
H672
672
L6
40-68
56711
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
56712
CUMMINS
11.0
H672
672
L6
56712
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
567267R1
NAVISTAR
4.3
400
264
L6
63-74
567267R1
NAVISTAR
4.6
UTD282
282
L6
53-70
567267R1
NAVISTAR
4.8
666, 706, 766
291
L6
567943
GM
5.0
No Model
OLDS
303
V8
49-53
567943
GM
5.4
No Model
.7
330
V8
49-53
568812
GM
6.1
No Model
370
370
V8
57-58
5743013
GM
3.2
No Model
194
L6
62-72
5743014
GM
2.5
No Model
IND
153
L4
62-80
574440
GM
6.1
No Model
371
V8
57-60
574440
GM
6.1
No Model
370
370
V8
57-58
574440
GM
6.5
No Model
OLDS
394
V8
59-64
574544
GM
6.1
No Model
371
V8
57-60
574544
GM
6.1
No Model
370
370
V8
57-58
574544
GM
6.5
No Model
OLDS
394
V8
59-64
5750174
FORD
5.4
No Model
332
V8
58-59
5752421
FORD
5.4
No Model
332
V8
58-59
5773990
DDC
2.3
2-71
142
L2
5773990
DDC
2.3
2-71 2V
142
L2
5773990
DDC
2.3
2-71 CROSS-HEAD
142
L2
5773990
DDC
2.3
2-71E
142
L2
5773990
DDC
2.3
2-71M
142
L2
5773990
DDC
2.3
2-71N
142
L2
5773990
DDC
2.3
2-71T
142
L2
577440
GM
6.5
No Model
OLDS
394
V8
59-64
5782680
GM
5.4
No Model
327
V8
62-67
581921
TRIUMPH
2.1
No Model
130
L4
62-67
58225D
HERCULES
1.0
ZXA, ZXA3
59
L4
58225D
HERCULES
1.0
ZXA, ZXA3
59
L4
582740
GM
6.5
No Model
OLDS
394
V8
59-64
582746
GM
6.5
No Model
OLDS
394
V8
59-64
59228
HERCULES
1.0
ZXA,ZXA3
59
L4
59228
HERCULES
1.1
ZXA, ZXB3
65
L4
593
CHRYSLER
1.7
ALLIANCE
105
L4
85-87
593
RENAULT
1.7
No Model
105
L4
85-87
59-PK
CHRYSLER
2.0
COLT
122
L4
83-90
59-PK
CHRYSLER
2.0
COLT
122
L4
90-94
59-PK
CHRYSLER
2.0
COLT
122
L4
89-91
59-PK
MITSUBISHI
2.0
CORDIA
122
L4
84-86
59-PK
MITSUBISHI
2.0
CORDIA
122
L4
87
59-PK
MITSUBISHI
2.0
CORDIA
122
L4
88-89
59-PK
MITSUBISHI
2.0
ECLIPSE
122
L4
90-92
59-PK
MITSUBISHI
2.0
No Model
122
L4
90-92
592
VIN
.7
CAR
40-68

Casting
Manufacturer
Liter
Model
VIN
5A
TOYOTA
1.6
CELICA
4A-FE
5AK
CHRYSLER
2.2
No Model
5AK
CHRYSLER
2.2
No Model
135
L4
90
5AK
CHRYSLER
2.2
SHELBY
135
L4
86-90
5B-4825
CATERPILLAR
3.6
No Model
221
L4
5B-8018
CATERPILLAR
1.4
D7
83
L2
5B-8018
CATERPILLAR
1.4
STARTING MOTOR
83
L2
5B-8454
CATERPILLAR
1.4
D7
1*
83
L2
5B-8455
CATERPILLAR
1.4
D7
1*
83
L2
5B-8455
CATERPILLAR
1.4
STARTING MOTOR
83
L2
5B-8754
CATERPILLAR
1.4
STARTING MOTOR
83
L2
5C3834V
CATERPILLAR
7.0
3304
CB
425
L4
5C3836
CATERPILLAR
8.6
1673
CB
525
L6
5C3836
CATERPILLAR
8.6
D333
CB
525
L6
5C3836
CATERPILLAR
10.5
1673C
CB
638
L6
5C3836
CATERPILLAR
10.5
1673C
SP
638
L6
5C3836
CATERPILLAR
10.5
3306
CB
638
L6
5C3836
CATERPILLAR
10.5
3306
DI
638
L6
5C3836
CATERPILLAR
10.5
3306
SP
638
L6
5C3836
CATERPILLAR
10.5
3306
SP
638
L6
5C3836
CATERPILLAR
10.5
3306
SP
638
L6
5C3836
CATERPILLAR
10.5
334
638
L6
5C3836
CATERPILLAR
10.5
D333C
CB
638
L6
5C3836
CATERPILLAR
10.5
D333C
SP
638
L6
5F1099
CATERPILLAR
4.1
D311
252
L4
5F-1099
CATERPILLAR
3.6
No Model
221
L4
5F5020
CATERPILLAR
8.6
D318
525
L6
5F5020
CATERPILLAR
8.6
D318(2)
525
L6
5F-5020
CATERPILLAR
8.6
D318(2)
525
L6
5F-5455
CATERPILLAR
1.4
D7
83
L2
5F-5455
CATERPILLAR
1.4
STARTING MOTOR
83
L2
5F-8405
CATERPILLAR
0.9
No Model
54
L2
5F-9586
CATERPILLAR
40.8
386
2492
V 12
5F-9586
CATERPILLAR
40.9
397
2493
V 12
5F-9587
CATERPILLAR
27.2
364
1662
V8
5F-9587
CATERPILLAR
27.2
375
1662
V8
5G9-37
TOYOTA
1.6
COROLLA
2T-C
97
L4
71-79
5GA
FORD
3.7
No Model
226
L6
41-47
5H2980
CATERPILLAR
12.2
D326
744
L6
5H2980
CATERPILLAR
12.2
D337
744
L6
5H3324
CATERPILLAR
12.2
D326
744
L6
5H3324
CATERPILLAR
12.2
D337
744
L6
5H4324
CATERPILLAR
12.2
D326
744
L6
5H4324
CATERPILLAR
12.2
D337
744
L6
5H-4324
CATERPILLAR
12.2
D326
744
L6
5H-4324
CATERPILLAR
12.2
D337
744
L6
5H7375
CATERPILLAR
10.5
1673C
638
L6
5L2684
CATERPILLAR
32.2
379
1964
V8
5L2684
CATERPILLAR
32.2
D379
1964
V8
5M
FORD
6.6
No Model
400
V8
71-79
5M
FORD
6.6
No Model
400
V8
79-82
5M-9960
CATERPILLAR
5.1
No Model
312
L4
5MA
FORD
6.6
No Model
400
V8
71-79
5MA
FORD
6.6
No Model
400
V8
79-82
5MAB
FORD
6.6
No Model
400
V8
71-79
5MAB
FORD
6.6
No Model
400
V8
79-82
5ME
TOYOTA
2.8
CELICA
5MGE
168
L6
82-88
5S5251
CATERPILLAR
7.0
3304
CB
425
L4
5S5251
CATERPILLAR
7.0
3304
DI
425
L4
1*
1*
593
CB
CID Cyl
Year
97
L4
88-96
135
L4
91-93

Casting
Manufacturer
Liter
Model
5S5251
CATERPILLAR
7.0
3304
SP
425
L4
5S5251
CATERPILLAR
7.0
D330C
CB
425
L4
5S5251
CATERPILLAR
7.0
D330C
SP
425
L4
5S5521
CATERPILLAR
7.0
D330C
CB
425
L4
5S5521
CATERPILLAR
7.0
D330C
SP
425
L4
5S5870
CATERPILLAR
8.6
1673
CB
525
L6
5S5870
CATERPILLAR
8.6
D333
CB
525
L6
5S5870
CATERPILLAR
10.5
1673C
CB
638
L6
5S5870
CATERPILLAR
10.5
1673C
SP
638
L6
5S5870
CATERPILLAR
10.5
3306
CB
638
L6
5S5870
CATERPILLAR
10.5
3306
DI
638
L6
5S5870
CATERPILLAR
10.5
3306
SP
638
L6
5S5870
CATERPILLAR
10.5
3306
SP
638
L6
5S5870
CATERPILLAR
10.5
3306
SP
638
L6
5S5870
CATERPILLAR
10.5
334
638
L6
5S5870
CATERPILLAR
10.5
D333C
CB
638
L6
5S5870
CATERPILLAR
10.5
D333C
SP
638
L6
60
NISSAN
2.2
No Model
Z22E
133
L4
6000008
NAVISTAR
6.7
856
407
L6
601062
CHRYSLER
3.3
No Model
OLD
201
L6
60181
HERCULES
1.0
ZXA, ZXA3
59
L4
60181
HERCULES
1.0
ZXA, ZXA3
59
L4
604440
GM
6.6
No Model
RO
400
V8
65-69
60835H
NAVISTAR
3.8
No Model
GRD
233
L6
41-58
60835H
NAVISTAR
4.0
No Model
242
L6
60835H
NAVISTAR
4.3
400
264
L6
63-74
60835HA
NAVISTAR
3.8
No Model
233
L6
41-58
60835HA
NAVISTAR
4.0
No Model
242
L6
60835HA
NAVISTAR
4.3
400
264
L6
63-74
60835HB
NAVISTAR
3.8
No Model
233
L6
41-58
60835HB
NAVISTAR
4.0
No Model
242
L6
60835HB
NAVISTAR
4.3
400
264
L6
63-74
60889HC
NAVISTAR
2.5
No Model
152
L4
61-68
60889HC
NAVISTAR
4.1
248
L4
61-68
610
GM
4.3
No Model
260
V6
82-85
61011
WAUKESHA
0.0
6MZB
L6
6107342
GM
3.7
TRUCK
228
L6
39-51
6107342
GM
4.0
No Model
248
L8
37-55
6107432
GM
3.7
No Model
224
L6
40-47
6107432
GM
4.0
No Model
248
L8
37-55
6107432
GM
4.1
No Model
256
L6
54-56
6107432
GM
4.2
No Model
261
L6
54-62
611
CHRYSLER
2.5
No Model
150
L4
86-88
611
GM
4.3
No Model
260
V6
82-85
6110-31-1110
KOMATSU
7.2
4D120-10
442
L4
6110-31-1110
KOMATSU
7.2
4D120-11
442
L4
6110-31-1110
KOMATSU
7.2
4D120-8
442
L4
6110-31-1112
KOMATSU
7.2
4D120-10
442
L4
6110-31-1112
KOMATSU
7.2
4D120-11
442
L4
6110-31-1112
KOMATSU
7.2
4D120-8
442
L4
6110-33-1110
KOMATSU
7.2
4D120-10
442
L4
6110-33-1110
KOMATSU
7.2
4D120-11
442
L4
6110-33-1110
KOMATSU
7.2
4D120-8
442
L4
6110-33-1112
KOMATSU
7.2
4D120-10
442
L4
6110-33-1112
KOMATSU
7.2
4D120-11
442
L4
6110-33-1112
KOMATSU
7.2
4D120-8
442
L4
6110-A
FORD
4.2
5000
256
L4
6110-A
FORD
4.2
BSD-442
256
L4
6110-A
FORD
4.2
BSD-442T
256
L4
594
VIN
GRD
GRD
CID Cyl
Year
82-83
35-43
72-78

Casting
Manufacturer
Liter
Model
6115-31-1100
KOMATSU
8.5
130
518
L4
6115-31-1110
KOMATSU
8.5
130
518
L4
6116028
DDC
0.9
53
53
L3
6116028
DDC
2.6
3-53
159
L3
612456
CHRYSLER
3.3
No Model
OLD
201
L6
61265R1
NAVISTAR
4.1
248
L4
61265R1
NAVISTAR
4.3
400
264
L6
63-74
61265R1
NAVISTAR
4.6
UTD282
282
L6
53-70
6127-31-1111
KOMATSU
19.3
155
1175
L6
6127-31-1113
KOMATSU
19.3
155
1175
L6
6127-31-1114
KOMATSU
19.3
155
1175
L6
6134-31-1110
KOMATSU
4.0
105.5
242
L4
6136-31-1110
KOMATSU
6.5
105
396
L6
6136-31-1110
KOMATSU
6.5
105
396
L6
6138-31-1110
KOMATSU
6.5
105
396
L6
6138-31-1110
KOMATSU
6.5
105
396
L6
6151-31-1110
KOMATSU
11.1
125
674
L6
6151-31-1110
KOMATSU
11.1
8361
674
L6
6151-31-1110
KOMATSU
11.1
S6D125
674
L6
6151-41-1112
KOMATSU
11.1
125
674
L6
615-31-1110
KOMATSU
11.1
8361
674
L6
615-31-1110
KOMATSU
11.1
S6D125
674
L6
616A15
MACK
8.4
No Model
510
L6
616A15
MACK
8.8
No Model
540
L6
6170310501
MERCEDES BENZ
3.0
No Model
183
L5
86-89
6176
CHRYSLER
2.5
DAKOTA
153
L4
89-92
618807
WHITE
4.7
No Model
288
L6
618807
WHITE
6.0
No Model
366
L6
618807
WHITE
6.4
No Model
390
L6
619807
WHITE
4.7
No Model
288
L6
619807
WHITE
6.0
No Model
366
L6
619807
WHITE
6.4
No Model
390
L6
619807B
WHITE
4.7
No Model
288
L6
619807B
WHITE
6.0
No Model
366
L6
619807B
WHITE
6.4
No Model
390
L6
620035
CHRYSLER
3.6
No Model
218
L6
65-71
620035
CHRYSLER
3.8
No Model
230
L6
42-52
62025B
JOHN DEERE
1.1
L SERIES
66
L2
31-42
62025B
JOHN DEERE
1.3
LA SERIES
77
L2
41-46
6206
KOMATSU
4.9
6D95
299
L6
6206
KOMATSU
4.9
6D95L-1
299
L6
6206
KOMATSU
4.9
95
299
L6
6206
KOMATSU
4.9
95
299
L6
6206-2
KOMATSU
3.3
4D95S-W-1
199
L4
6206-6
KOMATSU
3.3
4D95S-1
199
L4
6206-6
KOMATSU
3.3
95
199
L4
6206-6
KOMATSU
3.3
95L
199
L4
6206-6
KOMATSU
4.9
6D95L-1
299
L6
6206-6
KOMATSU
4.9
95
299
L6
6223
GM
6.0
No Model
366
V8
68-90
6223
GM
6.0
No Model
366
V8
89-90
6223
GM
6.5
No Model
396
V8
65-72
6223
GM
7.0
No Model
427
V8
66-90
625
GM
2.5
No Model
151
L4
87-88
6303
FORD
3.8
No Model
232
V6
82-87
6303
FORD
3.8
No Model
232
V6
88-95
6303
FORD
3.8
No Model
232
V6
84-85
6303
FORD
3.8
No Model
232
V6
89-95
6306
GM
2.2
CAVALIER
134
L4
91-94
595
VIN
CID Cyl
Year
35-43

Casting
Manufacturer
Liter
Model
6306
GM
2.2
CAVALIER
635280
HENRY
2.2
No Model
638121
HENRY
2.2
No Model
63GC
CHRYSLER
2.0
TALON
63GC
CHRYSLER
2.0
63-GC
CHRYSLER
63-GC
CID Cyl
Year
134
L4
94-97
134
L4
51-53
134
L4
51-53
122
L4
93-98
TALON
122
L4
90-92
2.0
COLT
122
L4
83-90
CHRYSLER
2.0
COLT
122
L4
90-94
63-GC
CHRYSLER
2.0
COLT
122
L4
89-91
63-GC
MITSUBISHI
2.0
CORDIA
122
L4
84-86
63-GC
MITSUBISHI
2.0
CORDIA
122
L4
87
63-GC
MITSUBISHI
2.0
CORDIA
122
L4
88-89
63-GC
MITSUBISHI
2.0
ECLIPSE
122
L4
90-92
63-GC
MITSUBISHI
2.0
No Model
122
L4
90-92
63GU
CHRYSLER
2.0
TALON
122
L4
93-98
63GU
CHRYSLER
2.0
TALON
122
L4
90-92
64
CHRYSLER
2.0
COLT
122
L4
90-94
64
CHRYSLER
2.0
TALON
122
L4
90-92
64
CHRYSLER
2.4
COLT VISTA
143
L4
90-92
64
HYUNDAI
2.4
SONATA
143
L4
89-93
64
MITSUBISHI
2.4
No Model
143
L4
85-86
64
MITSUBISHI
2.4
No Model
143
L4
89-92
64
MITSUBISHI
2.4
VAN
143
L4
87-88
641127
CHRYSLER
2.2
No Model
A/J
134
L4
42-71
641127
FORD
2.2
134
L4
54-60
641127
HENRY
2.2
No Model
134
L4
51-53
641127
HENRY
2.2
No Model
134
L4
53-71
641127
JEEP
2.2
No Model
134
L4
53-71
642271
WHITE
4.7
No Model
288
L6
642271
WHITE
6.0
No Model
366
L6
642271
WHITE
6.4
No Model
390
L6
642272R
WHITE
4.7
No Model
288
L6
642272R
WHITE
6.0
No Model
366
L6
642272R
WHITE
6.4
No Model
390
L6
642462
HENRY
2.6
No Model
161
L6
51-54
642462
JEEP
2.4
No Model
148
L6
47-50
642462
JEEP
2.6
No Model
161
L6
50-62
642462
KAISER
2.6
No Model
161
L6
54-55
642649
WHITE
5.2
120A
318
L6
6433
CHRYSLER
3.8
No Model
231
V6
91-00
646318
CHRYSLER
2.2
No Model
A/J
134
L4
42-71
646318
FORD
2.2
134
L4
54-60
646318
HENRY
2.2
No Model
134
L4
51-53
646318
HENRY
2.2
No Model
134
L4
53-71
646318
JEEP
2.2
No Model
134
L4
53-71
646810
WHITE
5.2
120A
318
L6
64806670F
FIAT
8.1
8365
494
L6
64806670F
IVECO
8.1
8365
494
L6
64806671F
FIAT
8.1
8365
494
L6
64806671F
IVECO
8.1
8365
494
L6
648455
GM
4.1
ELDORADO
252
V8
87
648455
GM
4.1
No Model
252
V8
87-88
648455
GM
4.5
No Model
272
V8
90
648455
GM
4.5
No Model
272
V8
88-89
6-4-A
HONDA
1.6
CIVIC
D16A6
97
L4
88-91
651
TOYOTA
2.4
4-RUNNER
22R-E
144
L4
89-95
651828
GM
5.0
No Model
305
V6
60-75
651828
GM
5.8
No Model
351
V6
65-72
65-RU
CHRYSLER
2.0
COLT
122
L4
83-90
65-RU
CHRYSLER
2.0
COLT
122
L4
90-94
596
VIN
4

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
65-RU
CHRYSLER
2.0
COLT
65-RU
MITSUBISHI
2.0
CORDIA
122
L4
89-91
122
L4
65-RU
MITSUBISHI
2.0
CORDIA
84-86
122
L4
65-RU
MITSUBISHI
2.0
87
CORDIA
122
L4
88-89
65-RU
MITSUBISHI
65-RU
MITSUBISHI
2.0
ECLIPSE
122
L4
90-92
2.0
No Model
122
L4
66011
90-92
WAUKESHA
0.0
VIH
L4
66011-A
WAUKESHA
0.0
VIH
662025D
JOHN DEERE
1.1
L SERIES
662025D
JOHN DEERE
1.3
LA SERIES
662594R
WHITE
4.7
No Model
662594R
WHITE
6.0
No Model
366
L6
662594R
WHITE
6.4
No Model
390
L6
665792
CHRYSLER
3.9
No Model
237
L6
42-56
665792
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
666739
CHRYSLER
3.6
No Model
218
L6
65-71
666759
CHRYSLER
3.9
No Model
237
L6
42-56
666759
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
669700
FIAT
1.2
No Model
75
L4
54-70
670008
NAVISTAR
6.7
1256
DT
407
L6
6700080
NAVISTAR
6.7
1256
DT
407
L6
6700080
NAVISTAR
6.7
856
407
L6
670008C
NAVISTAR
6.7
1256
DT
407
L6
670008C
NAVISTAR
6.7
856
407
L6
670008C1
NAVISTAR
6.7
1256
DT
407
L6
670008C1
NAVISTAR
6.7
856
407
L6
670475
CHRYSLER
6.2
No Model
377
V8
670901
IVECO
9.8
8205
599
L6
670901
IVECO
10.3
8205
629
672016
GM
7.8
No Model
478
V6
67254
WHITE
7.0
No Model
427
L6
67254
WHITE
7.4
No Model
452
L6
67254
WHITE
7.4
No Model
452
L6
67254
WHITE
8.3
No Model
504
L6
67254
WHITE
8.7
No Model
532
L6
673498
CHRYSLER
4.0
No Model
241
L6
32-41
673498
CHRYSLER
4.1
No Model
251
L6
42-68
675050
NAVISTAR
6.8
1066
414
L6
675050C
NAVISTAR
6.8
1066
414
L6
675050C1
NAVISTAR
6.8
1066
414
L6
675050C1
NAVISTAR
7.5
TD-14
461
L4
675051
NAVISTAR
7.1
1486
436
L6
675051C
NAVISTAR
7.1
1486
436
L6
675051C1
NAVISTAR
7.1
1486
436
L6
67507C1
NAVISTAR
5.1
HYDRO 70
312
L6
675351C2
NAVISTAR
5.9
766
D(1)
360
L6
675591C
NAVISTAR
7.6
DT466B
DT
466
L6
49-76
675591C
NAVISTAR
7.6
DT466B & C
466
L6
80-90
675591C
NAVISTAR
7.6
DT466C
1990
466
L6
90-93
675591C-1
NAVISTAR
7.6
DT466B
DT
466
L6
49-76
675591-C2
NAVISTAR
7.6
DT466B
DT
466
L6
49-76
675591-C2
NAVISTAR
7.6
DT466B & C
466
L6
80-90
675591-C2
NAVISTAR
7.6
DT466C
466
L6
88-90
675591-C3
NAVISTAR
7.6
DT466B & C
466
L6
80-90
675591-C3
NAVISTAR
7.6
DT466C
466
L6
88-90
675591-C4
NAVISTAR
7.6
DT466C
1990
466
L6
90-93
675707C
NAVISTAR
5.1
HYDRO 70
312
L6
6764
GM
5.0
Z-28
302
V8
67-69
6769898
CHRYSLER
3.8
No Model
230
L6
42-52
302
597
L4
66
L2
31-42
77
L2
41-46
288
L6
46-53
65-77
49-54

Casting
Manufacturer
Liter
Model
68111
MILITARY STD
2.2
No Model
68111
WAUKESHA
0.0
FCB
684
CHRYSLER
2.5
No Model
684
CHRYSLER
2.5
684
CHRYSLER
684
VIN
CID Cyl
Year
133
L4
L4
151
L4
81-83
No Model
151
L4
81-83
3.3
No Model
A/J
199
L6
65-70
GM
2.5
FIERO
151
L4
83-86
684
GM
2.5
No Model
151
L4
77-79
684
GM
2.5
No Model
151
L4
82-86
684
GM
2.5
No Model
151
L4
79-83
684
GM
2.5
No Model
151
L4
79-79
684
GM
2.5
No Model
151
L4
82-83
684
GM
2.5
No Model
151
L4
82-83
684
GM
2.5
No Model
151
L4
78-80
684,777
CHRYSLER
2.5
No Model
151
L4
81-83
684777
CHRYSLER
2.5
No Model
151
L4
81-83
684777
GM
2.5
No Model
151
L4
79-83
6860
GM
6.2
No Model
379
V6
73-76
686950
CHRYSLER
6.2
No Model
377
V8
46-53
694
GM
3.3
No Model
204
V6
89-93
6960
GM
6.2
No Model
379
V6
73-76
696038
GM
6.2
No Model
379
V6
73-76
69-GU
CHRYSLER
2.0
COLT
122
L4
83-90
69-GU
CHRYSLER
2.0
COLT
122
L4
90-94
69-GU
CHRYSLER
2.0
COLT
122
L4
89-91
69-GU
MITSUBISHI
2.0
CORDIA
122
L4
84-86
69-GU
MITSUBISHI
2.0
CORDIA
122
L4
87
69-GU
MITSUBISHI
2.0
CORDIA
122
L4
88-89
69-GU
MITSUBISHI
2.0
ECLIPSE
122
L4
90-92
69-GU
MITSUBISHI
2.0
No Model
122
L4
90-92
69TM6303-EA
FORD
1.7
BOBCAT ,IND, MARINE
104
V4
63-75
69TM6303-EA
SAAB
1.7
No Model
V-4
104
V4
68-73
6A3.4
CUMMINS
2.3
L SERIES
140
L4
6A3.4
CUMMINS
3.4
No Model
210
L6
6A3.4
CUMMINS
3.4
No Model
210
L6
6A3.4
ONAN
2.3
L SERIES
140
L4
6A34
CUMMINS
3.4
No Model
210
L6
6A34
ONAN
3.4
L SERIES
210
L6
6A34
ONAN
3.4
L SERIES
TURBO
210
L6
6AM
CHRYSLER
2.2
No Model
135
L4
6AM
CHRYSLER
2.2
No Model
135
L4
90
6AM
CHRYSLER
2.2
SHELBY
135
L4
86-90
6F1913
CATERPILLAR
20.4
D342
1246
L6
6F1913
CATERPILLAR
20.4
D342
1246
L6
6F1913
CATERPILLAR
20.4
D342
1246
L6
6F1913
CATERPILLAR
20.4
D342
1246
L6
6F1913
CATERPILLAR
20.4
D342
1246
L6
6F1913
CATERPILLAR
20.4
D8
1246
L6
6F1913
CATERPILLAR
20.4
D8
1246
L6
6F1913
CATERPILLAR
20.4
D8
1246
L6
6F-1913
CATERPILLAR
16.3
No Model
992
L6
6F-1913
CATERPILLAR
20.4
13000
1246
L6
6F1914
CATERPILLAR
13.6
D339
831
L4
6F-1914
CATERPILLAR
13.6
7700
831
L4
6-H
CHRYSLER
2.0
LASER
122
L4
93-94
6-H
CHRYSLER
2.0
TALON
122
L4
93-98
6H4385
CATERPILLAR
8.6
D318
525
L6
6H4385
CATERPILLAR
8.6
D318(2)
6H5840
CATERPILLAR
24.1
353
6H5840
CATERPILLAR
24.1
353
C/B
598
525
L6
1473
L6
1473
L6
91-93

Casting
Manufacturer
Liter
Model
VIN
6H-5840
CATERPILLAR
24.1
D9
1473
L6
6H6888
CATERPILLAR
5.1
955
312
L4
6H6888
CATERPILLAR
5.1
955
312
L4
6L7500
CATERPILLAR
64.4
6M
TOYOTA
6N2822
CATERPILLAR
6N2822
6N2822
D399
CID Cyl
3928
CRESSIDA
7M-GE
20.4
D342
CATERPILLAR
20.4
CATERPILLAR
20.4
6N2822
CATERPILLAR
6N2822
V 16
180
L6
1246
L6
D342
1246
L6
D342
1246
L6
20.4
D342
1246
L6
CATERPILLAR
20.4
D342
1246
L6
6N2822
CATERPILLAR
20.4
D8
1246
L6
6N2822
CATERPILLAR
20.4
D8
1246
L6
6N2822
CATERPILLAR
20.4
D8
1246
L6
6N2822
CATERPILLAR
20.4
D8K
1246
L6
6N2822
CATERPILLAR
20.4
D8K
1246
L6
6N2822
CATERPILLAR
20.4
G342
1246
L6
6N2822
CATERPILLAR
20.4
G342
1246
L6
6N3906
CATERPILLAR
14.6
3406
893
L6
6N3906
CATERPILLAR
14.6
3406
893
L6
6N3906
CATERPILLAR
14.6
3406
SP
893
L6
6N7898
CATERPILLAR
29.3
D348
6N8290
CATERPILLAR
5.2
3204
DI
318
L4
6N8290
CATERPILLAR
5.2
3204
DI(2)
318
L4
6N8290
CATERPILLAR
5.2
3204
PC
318
L4
6N8314
CATERPILLAR
19.5
D346
1191
V8
6N8314
CATERPILLAR
19.5
D346
1191
V8
6N8338
CATERPILLAR
39.0
D349
2382
V 16
70115R1
NAVISTAR
3.6
No Model
70115R1
NAVISTAR
3.6
No Model
70115R3
NAVISTAR
3.6
70118R1
NAVISTAR
3.9
703864R
NAVISTAR
2.3
B275
7062R1
NAVISTAR
4.6
70HM-AKA
FORD
2.0
70HM-AKA
FORD
70HM-AKR
3.0
1786
Year
86-92
V 12
220
L6
220
L6
No Model
220
L6
50-62
BLACK DIAMOND
240
L6
63-69
144
L4
UTD282
282
L6
53-70
PINTO
122
L4
71-74
2.0
PINTO
122
L4
74-74
FORD
2.0
PINTO
122
L4
71-74
70HM-AKR
FORD
2.0
PINTO
122
L4
74-74
7115
GM
6.0
No Model
366
V8
68-90
7115
GM
6.0
No Model
366
V8
89-90
7115
GM
6.5
No Model
396
V8
65-72
7115
GM
7.0
No Model
427
V8
66-90
711MAC
FORD
1.1
KSG 1.1
67
L4
93-98
711MAC
FORD
1.6
INDUSTRIAL
98
L4
78-93
711MAC
FORD
1.6
KSG 1.6
98
L4
78-96
711MAD
FORD
1.1
KSG 1.1
67
L4
93-98
711MAD
FORD
1.6
INDUSTRIAL
98
L4
78-93
711MAD
FORD
1.6
KSG 1.6
98
L4
78-96
711MAD
FORD
1.6
PINTO,CAPRI
98
L4
70-73
711MAD
FORD
1.6
PINTO,FESTIVA
98
L4
76-80
711MAE
FORD
1.1
KSG 1.1
67
L4
93-98
711MAE
FORD
1.6
INDUSTRIAL
98
L4
78-93
711MAE
FORD
1.6
KSG 1.6
98
L4
78-96
713F-6303-AA
FORD
4.0
No Model
242
L4
67-70
713F-6303-AA
FORD
4.2
No Model
254
L4
69-82
713F-6303-AA
FORD
5.9
No Model
362
L6
69-82
713F-6303-AA
FORD
6.0
No Model
363
L6
64-70
713F-6303-AA
FORD
6.2
No Model
380
L6
69-82
7184N
GM
1.6
CHEVETTE
98
L4
79-80
7184N
GM
1.6
CHEVETTE
98
L4
80-82
599
BG
50-62

Casting
Manufacturer
Liter
Model
7184N
7184N
CID Cyl
Year
GM
1.6
CHEVETTE
GM
1.6
CHEVETTE
98
L4
82-87
98
L4
7184N
GM
1.6
CHEVETTE
76-77
98
L4
7194840
CUMMINS
7.7
PHASE 4&5
78-79
470
V8
72
CHRYSLER
3.0
No Model
72
CHRYSLER
3.0
No Model
181
V6
87-95
181
V6
72
CHRYSLER
3.0
91-92
No Model
181
V6
72
CHRYSLER
91-92
3.0
No Model
181
V6
72
CHRYSLER
90-92
3.0
STEALTH
181
V6
72
93-95
HYUNDAI
3.0
SONATA
183
V6
89-98
72
MITSUBISHI
3.0
3000GT
181
V6
91-94
72
MITSUBISHI
3.0
3000GT
181
V6
91-92
72
MITSUBISHI
3.0
3000GT
181
V6
93-98
72
MITSUBISHI
3.0
GALANT
181
V6
88-92
72
MITSUBISHI
3.0
MONTERO
181
V6
95-03
72
MITSUBISHI
3.0
No Model
181
V6
87-91
7243N
GM
2.0
No Model
121
L4
82-86
7243N
GM
2.0
S-10
121
L4
82-84
7248N
GM
2.0
No Model
121
L4
82-86
7248N
GM
2.0
S-10
121
L4
82-84
726
GM
3.8
No Model
229
V6
83-84
726
GM
3.8
No Model
229
V6
80-82
726N
GM
3.3
No Model
200
V6
78-79
726N
GM
3.8
No Model
229
V6
83-84
726N
GM
3.8
No Model
231
V6
82
726N
GM
3.8
No Model
231
V6
83-87
726N
GM
3.8
No Model
229
V6
80-82
72HM-JA
FORD
2.0
PINTO
122
L4
71-74
72HM-JA
FORD
2.0
PINTO
122
L4
74-74
732
GM
3.0
No Model
181
V6
82-85
732
GM
3.0
No Model
181
V6
85-86
732
GM
3.0
No Model
181
V6
87-88
732596
JEEP
3.7
No Model
226
L6
54-65
733536
JEEP
3.7
No Model
226
L6
54-65
737
GM
3.8
No Model
231
V6
92-94
737
GM
3.8
No Model
231
V6
95-05
74
MITSUBISHI
3.5
MONTERO
213
V6
97-04
74062R
NAVISTAR
4.6
UTD282
282
L6
53-70
74062R1
NAVISTAR
4.6
UTD282
282
L6
53-70
7416
GM
7.4
No Model
454
V8
75-76
7416
GM
7.4
No Model
454
V8
87-90
7416
GM
7.4
No Model
454
V8
76-79
7416
GM
7.4
No Model
454
V8
80-81
7416
GM
7.4
No Model
454
V8
80-86
7416
GM
7.4
No Model
454
V8
87-90
7416
GM
7.4
No Model
454
V8
76-78
7416
GM
7.4
No Model
454
V8
70-75
7434X
WHITE
4.7
No Model
288
L6
7434X
WHITE
6.0
No Model
366
L6
7434X
WHITE
6.4
No Model
390
L6
74600D
HERCULES
3.3
DOOB
199
L4
74600D
HERCULES
3.7
DOOC
226
L4
74600D
HERCULES
4.2
DOOD
255
L4
74962R1
NAVISTAR
4.6
UTD282
282
L6
53-70
74TM
FORD
2.8
BRONCO
171
V6
83-86
74TM-AA
FORD
2.8
CAPRI
171
V6
74-79
7501366
CHRYSLER
3.7
No Model
225
L6
76-87
7501366
CHRYSLER
3.7
No Model
225
L6
69-80
7501366
CHRYSLER
3.7
No Model
225
L6
77-80
600
VIN

Casting
Manufacturer
Liter
Model
CID Cyl
Year
7501366
CHRYSLER
3.7
No Model
7501366
CHRYSLER
3.7
No Model
225
L6
81-82
225
L6
750604D
HERCULES
3.3
81-82
DOOB
199
L4
750604D
HERCULES
750604D
HERCULES
3.7
DOOC
226
L4
4.2
DOOD
255
751303
L4
NAVISTAR
2.5
2424
154
L4
751303R2
NAVISTAR
2.5
2424
154
L4
751303R3
NAVISTAR
2.5
2424
154
L4
751303R5
NAVISTAR
2.5
2424
154
L4
76
CHRYSLER
3.0
No Model
181
V6
87-95
76
CHRYSLER
3.0
No Model
181
V6
91-92
76
CHRYSLER
3.0
No Model
181
V6
91-92
76
CHRYSLER
3.0
No Model
181
V6
90-92
76
HYUNDAI
3.0
SONATA
183
V6
89-98
76
MITSUBISHI
3.0
GALANT
181
V6
88-92
76
MITSUBISHI
3.0
MONTERO
181
V6
95-03
76
MITSUBISHI
3.0
No Model
181
V6
87-91
762706
CHRYSLER
4.0
No Model
241
L6
32-41
762706
CHRYSLER
4.1
No Model
251
L6
42-68
76613
HERCULES
4.3
DJXB
260
L6
76613
HERCULES
4.9
DJXC
298
L6
76613
HERCULES
4.9
DJXH
298
L6
76613
HERCULES
4.9
DJXH-F
298
L6
76613
HERCULES
5.6
DJXD
339
L6
76613
HERCULES
5.6
WXC
339
L6
766130D
HERCULES
4.3
DJXB
260
L6
766130D
HERCULES
4.9
DJXC
298
L6
766130D
HERCULES
4.9
DJXH
298
L6
766130D
HERCULES
4.9
DJXH-F
298
L6
766130D
HERCULES
5.6
DJXD
339
L6
766130D
HERCULES
5.6
WXC
339
L6
76614
HERCULES
4.3
DJXB
260
L6
76614
HERCULES
4.9
DJXC
298
L6
76614
HERCULES
4.9
DJXH
298
L6
76614
HERCULES
4.9
DJXH-F
298
L6
76614
HERCULES
5.6
DJXD
339
L6
76614
HERCULES
5.6
WXC
339
L6
76615D
HERCULES
4.3
DJXB
260
L6
76615D
HERCULES
4.9
DJXC
298
L6
76615D
HERCULES
4.9
DJXH
298
L6
76615D
HERCULES
4.9
DJXH-F
298
L6
76615D
HERCULES
5.6
DJXD
339
L6
76615D
HERCULES
5.6
WXC
339
L6
76TM
FORD
2.8
BRONCO
171
V6
83-86
771
CHRYSLER
2.5
No Model
151
L4
81-83
771
CHRYSLER
2.5
No Model
151
L4
81-83
771
CHRYSLER
3.3
No Model
A/J
199
L6
65-70
771
GM
2.5
No Model
151
L4
85-86
7711
WAUKESHA
3.0
No Model
185
L6
771MAC
FORD
1.1
KSG 1.1
67
L4
93-98
771MAC
FORD
1.6
INDUSTRIAL
98
L4
78-93
771MAC
FORD
1.6
KSG 1.6
98
L4
78-96
771MAC
FORD
1.6
PINTO,CAPRI
98
L4
70-73
771MAC
FORD
1.6
PINTO,FESTIVA
98
L4
76-80
771M-AC
FORD
1.6
PINTO,FESTIVA
L4
98
L4
78-80
777
CHRYSLER
2.5
No Model
151
L4
81-83
777
CHRYSLER
2.5
No Model
151
L4
81-83
777
GM
2.5
FIERO
151
L4
83-86
777
GM
2.5
No Model
151
L4
77-79
601
VIN
55-60
55-60
55-60
55-60

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
777
GM
2.5
No Model
777
GM
2.5
No Model
151
L4
82-86
151
L4
777
GM
2.5
No Model
79-83
151
L4
777
GM
2.5
79-79
No Model
151
L4
777
GM
82-83
2.5
No Model
151
L4
77A
78-80
NISSAN
1.6
SENTRA
GA16I
97
L4
89-90
77-A5
NISSAN
1.6
SENTRA
GA16I
97
L4
89-90
78240
NISSAN
2.0
H20
121
L4
77-92
78240
NISSAN
2.0
U20
121
L4
67-70
78TM
FORD
2.8
BRONCO
171
V6
83-86
78TM
FORD
2.8
CAPRI
171
V6
74-79
78TM
FORD
2.8
No Model
171
V6
74
78TM
FORD
2.8
No Model
PX
171
V6
75-77
78TM-CA
FORD
2.8
BRONCO
171
V6
83-86
79
CHRYSLER
3.0
No Model
181
V6
87-95
79
CHRYSLER
3.0
No Model
181
V6
91-92
79
CHRYSLER
3.0
No Model
181
V6
91-92
79
CHRYSLER
3.0
No Model
181
V6
90-92
79
HYUNDAI
3.0
SONATA
183
V6
89-98
79
MITSUBISHI
3.0
GALANT
181
V6
88-92
79
MITSUBISHI
3.0
MONTERO
181
V6
95-03
79
MITSUBISHI
3.0
No Model
181
V6
87-91
7B-4524
CATERPILLAR
0.6
STARTING MOTOR
36
L2
7B-6225
CATERPILLAR
20.4
13000
1246
L6
7B7452
CATERPILLAR
13.6
D339
831
L4
7B7452
CATERPILLAR
13.6
D339
831
L4
7B7452
CATERPILLAR
13.6
D7
831
L4
7B-7452
CATERPILLAR
13.6
7700
831
L4
7B7937
CATERPILLAR
20.4
D342
1246
L6
7B7937
CATERPILLAR
20.4
D8
1246
L6
7B7937
CATERPILLAR
20.4
D8
1246
L6
7B7937
CATERPILLAR
20.4
D8
1246
L6
7B-7937
CATERPILLAR
16.3
No Model
992
L6
7B-7937
CATERPILLAR
20.4
13000
1246
L6
7B-9079
CATERPILLAR
3.6
221
L4
7B9511
CATERPILLAR
20.4
D342
1246
L6
7B9511
CATERPILLAR
20.4
D8
1246
L6
7B9511
CATERPILLAR
20.4
D8
1246
L6
7B9511
CATERPILLAR
20.4
D8
1246
L6
7B-9511
CATERPILLAR
16.3
No Model
992
L6
7B-9511
CATERPILLAR
20.4
13000
1246
L6
7B9564
CATERPILLAR
7.0
D330C
CB
425
L4
7B9564
CATERPILLAR
7.0
D330C
SP
425
L4
7B-9564
CATERPILLAR
5.1
No Model
312
L4
7B9578
CATERPILLAR
13.6
D339
831
L4
7B9578
CATERPILLAR
13.6
D339
831
L4
7B9578
CATERPILLAR
13.6
D339
831
L4
7B9578
CATERPILLAR
13.6
D339
831
L4
7B9578
CATERPILLAR
13.6
D339
831
L4
7B9578
CATERPILLAR
13.6
D7
831
L4
7B9578
CATERPILLAR
13.6
D7
831
L4
7B-9578
CATERPILLAR
13.6
7700
831
L4
7B9620
CATERPILLAR
20.4
D342
1246
L6
7B9620
CATERPILLAR
20.4
D8
1246
L6
7B9620
CATERPILLAR
20.4
D8
1246
L6
7B9620
CATERPILLAR
20.4
D8
1246
L6
7B-9620
CATERPILLAR
16.3
No Model
992
L6
7B-9620
CATERPILLAR
20.4
13000
1246
L6
7B9654
CATERPILLAR
5.1
312
L4
No Model
955
602

Casting
Manufacturer
Liter
7B9654
CATERPILLAR
5.1
955
312
L4
7B-9654
CATERPILLAR
5.1
No Model
312
L4
7C3536
CATERPILLAR
14.6
3406
893
L6
7C3536
CATERPILLAR
14.6
3406
893
L6
7C3536
CATERPILLAR
14.6
3406
893
L6
7C3536
CATERPILLAR
14.6
3406
SP
893
L6
7E4316
CATERPILLAR
69.0
3516
4210
7F-8511
CATERPILLAR
13.6
7700
831
L4
7F8695
CATERPILLAR
12.2
D326
744
L6
7F8695
CATERPILLAR
12.2
D337
744
L6
7F-8695
CATERPILLAR
12.2
D326
744
L6
7F-8695
CATERPILLAR
12.2
D337
744
L6
7F9511
CATERPILLAR
13.6
D339
831
L4
7F9511
CATERPILLAR
13.6
D339
831
L4
7F9511
CATERPILLAR
13.6
D339
831
L4
7F9511
CATERPILLAR
13.6
D339
831
L4
7F9511
CATERPILLAR
13.6
D339
831
L4
7F9511
CATERPILLAR
13.6
D7
831
L4
7F9511
CATERPILLAR
13.6
D7
831
L4
7H1964
CATERPILLAR
8.6
D318
525
L6
7H1964
CATERPILLAR
8.6
D318(2)
525
L6
7H7008
CATERPILLAR
5.1
955
312
L4
7H7008
CATERPILLAR
5.1
955
312
L4
7HA
FORD
3.7
No Model
226
L6
47-52
7HA
LEYLAND
1.6
4-98
98
L4
70-80
7HA6303
FORD
4.2
2701C
254
L4
68-72
7HA-6303
FORD
3.7
No Model
226
L6
47-52
7M
FORD
5.8
F150
351
V8
93-96
7M
FORD
5.8
No Model
351
V8
80-82
7M
FORD
5.8
No Model
351
V8
83-91
7M
FORD
5.8
No Model
351
V8
69-78
7M
FORD
5.8
No Model
351
V8
79
7M
FORD
5.8
No Model
351
V8
84-97
7M
FORD
5.8
No Model
351
V8
68-74
7M
FORD
5.8
WSG-858
351
V8
7M
TOYOTA
3.0
CRESSIDA
7M-GE
180
L6
86-92
7M
TOYOTA
3.0
CRESSIDA
7MGTE
180
L6
87-92
7M2700
CATERPILLAR
1191
V8
7M-683
CATERPILLAR
0.6
7M9200
CATERPILLAR
14.6
1693
7M9200
CATERPILLAR
14.6
1693
7M9200
CATERPILLAR
14.6
7M9200
CATERPILLAR
7M9200
19.5
Model
VIN
D346
STARTING MOTOR
CID Cyl
Year
91-95
V 16
36
L2
893
L6
893
L6
1693
893
L6
14.6
1693
893
L6
CATERPILLAR
14.6
1693
893
L6
7M9200
CATERPILLAR
14.6
343
893
L6
7M9200
CATERPILLAR
14.6
D343
893
L6
7M9200
CATERPILLAR
14.6
D343
893
L6
7M9200
CATERPILLAR
14.6
G343
893
L6
7MA
FORD
5.8
F150
351
V8
93-96
7MA
FORD
5.8
No Model
351
V8
80-82
7MA
FORD
5.8
No Model
351
V8
83-91
7MA
FORD
5.8
No Model
351
V8
69-78
7MA
FORD
5.8
No Model
351
V8
79
7MA
FORD
5.8
No Model
351
V8
84-97
7MA
FORD
5.8
No Model
351
V8
68-74
7MA
FORD
5.8
WSG-858
351
V8
7N3408
CATERPILLAR
18.0
3408
1099
V8
7N3408
CATERPILLAR
18.0
D8L
1099
V8
7N5137
CATERPILLAR
5.2
3204
318
L4
603
DI

Casting
Manufacturer
Liter
Model
7N5137
CATERPILLAR
5.2
3204
DI(2)
318
L4
7N5137
CATERPILLAR
5.2
3204
PC
318
L4
7N9673
CATERPILLAR
11.5
1676
700
V8
7N9673
CATERPILLAR
11.5
D336
700
V8
7W0208
CATERPILLAR
34.5
3508
2105
V8
7W0212
CATERPILLAR
51.8
3512
3158
V 12
7W0216
CATERPILLAR
69.0
3516
4210
V 16
7W5206
CATERPILLAR
6.6
3116
403
L6
89-95
7W5206
CATERPILLAR
7.2
3126
439
L6
95-02
7W5206
CATERPILLAR
7.2
3126B
439
L6
7W9944
CATERPILLAR
4.4
3114
269
L4
ISUZU
5.4
6BB1
329
L6
ISUZU
5.8
6BD1-T
353
L6
8034
MAZDA
1.3
GLC
78
L4
76-78
8034
MAZDA
1.4
GLC SEDAN
86
L4
79-80
80RF
CHRYSLER
2.0
COLT
122
L4
83-90
80RF
CHRYSLER
2.0
COLT
122
L4
90-94
80RF
CHRYSLER
2.0
COLT
122
L4
89-91
80RF
MITSUBISHI
2.0
CORDIA
122
L4
84-86
80RF
MITSUBISHI
2.0
CORDIA
122
L4
87
80RF
MITSUBISHI
2.0
CORDIA
122
L4
88-89
80RF
MITSUBISHI
2.0
ECLIPSE
122
L4
90-92
80RF
MITSUBISHI
2.0
No Model
122
L4
90-92
815
GM
6.0
No Model
366
V8
89-90
816
GM
6.0
No Model
366
V8
89-90
817
CHRYSLER
2.8
No Model
173
V6
84-87
817
GM
2.8
FIERO
173
V6
85-88
817
GM
2.8
No Model
173
V6
82-85
817
GM
2.8
No Model
173
V6
82-85
817
GM
2.8
No Model
173
V6
85-92
817
GM
2.8
No Model
173
V6
85-86
817
GM
2.8
No Model
173
V6
87-89
817
GM
2.8
No Model
173
V6
80-86
817
GM
2.8
No Model
173
V6
82-84
817
GM
2.8
SONOMA
173
V6
86-93
817
GM
3.3
No Model
204
V6
89-93
817268
NAVISTAR
3.2
No Model
199
L6
64-67
817268-R1
NAVISTAR
3.2
No Model
199
L6
64-67
81-K
GM
1.0
FIREFLY
61
L3
89-00
81-K
GM
1.0
SPRINT
61
L3
86-88
82011
WAUKESHA
5.8
No Model
358
L6
82011
WAUKESHA
6.2
No Model
380
L6
82011
WAUKESHA
6.6
MZA
404
L6
821914C1
NAVISTAR
6.7
DT408
408
408
L6
93-96
82856
NAVISTAR
9.0
No Model
549
V8
60-78
82TM
FORD
2.8
BRONCO
171
V6
83-86
82TM
FORD
2.8
CAPRI
171
V6
74-79
82TM
FORD
2.8
No Model
171
V6
74
82TM
FORD
2.8
No Model
PX
171
V6
75-77
82TM-HAA
FORD
2.8
BRONCO
171
V6
83-86
833039
GM
7.4
No Model
454
V8
75-76
833039
GM
7.4
No Model
454
V8
76-79
833039
GM
7.4
No Model
454
V8
80-81
833039
GM
7.4
No Model
454
V8
80-86
833039
GM
7.4
No Model
454
V8
76-78
833039
GM
7.4
No Model
454
V8
70-75
835159
SAAB
2.0
No Model
B202
121
L4
86-94
835508
GM
2.7
CORVAIR
164
H6
64-69
835512
GM
2.7
CORVAIR
164
H6
64-69
604
VIN
CID Cyl
Year
89-94

Casting
Manufacturer
Liter
Model
836419
GM
2.7
CORVAIR
836523
GM
2.7
CORVAIR
836712R2
NAVISTAR
2.5
No Model
836712R2
NAVISTAR
4.1
836953
GM
3.5
837631
GM
837719R1
VIN
CID Cyl
Year
164
H6
64-69
164
H6
64-69
152
L4
61-68
248
L4
61-68
No Model
OLD
206
L6
29-38
3.5
No Model
OLD
206
L6
29-38
NAVISTAR
6.1
WD-9
372
L6
49-69
838281
GM
3.5
No Model
216
L6
37-52
838877
GM
3.5
No Model
216
L6
37-52
839111
GM
3.5
No Model
216
L6
37-52
839111
GM
3.7
No Model
224
L6
40-47
83917R
NAVISTAR
6.1
WD-9
372
L6
49-69
83917R1
NAVISTAR
6.1
WD-9
372
L6
49-69
83917R2
NAVISTAR
6.1
WD-9
372
L6
49-69
839750
GM
3.9
No Model
235
L6
49-62
839775
GM
3.5
No Model
216
L6
37-52
839775
GM
3.7
No Model
224
L6
40-47
8409
GM
2.7
CORVAIR
164
H6
64-69
8424
GM
3.5
TEMPEST
215
L6
64-65
8424
GM
3.8
No Model
230
L6
63-70
84611
WAUKESHA
0.0
6GAL
L6
8511-G
WAUKESHA
0.0
6AB
L4
851M
CHRYSLER
1.7
No Model
105
L4
78-83
8532
GM
5.7
CAMARO
350
V8
92-97
855153
CHRYSLER
5.3
No Model
323
323
L8
35-51
856080
CHRYSLER
3.5
No Model
218
L6
33-56
856080
CHRYSLER
3.6
No Model
218
L6
65-71
856080
CHRYSLER
3.8
No Model
230
L6
42-52
8629
CASE
2.5
880
154
L3
8629
CASE
2.5
880
154
L3
8629
CASE
2.7
885
164
L3
863706
CHRYSLER
4.0
No Model
241
L6
32-41
863706
CHRYSLER
4.1
No Model
251
L6
42-68
863712R1
NAVISTAR
2.5
No Model
152
L4
61-68
863712R1
NAVISTAR
4.1
248
L4
61-68
864718
CHRYSLER
3.8
No Model
230
L6
42-52
864718
CHRYSLER
3.9
No Model
237
L6
42-56
864718
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
864718
CHRYSLER
4.1
No Model
251
L6
42-68
864719
CHRYSLER
3.5
No Model
218
L6
33-56
864719
CHRYSLER
3.6
No Model
218
L6
65-71
864719
CHRYSLER
3.8
No Model
230
L6
42-52
865657
CHRYSLER
3.6
No Model
218
L6
65-71
865657
CHRYSLER
3.9
No Model
237
L6
42-56
865657
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
866953
GM
3.5
No Model
OLD
206
L6
29-38
868929
CHRYSLER
3.8
No Model
230
L6
42-52
868929
CHRYSLER
3.8
No Model
230
L6
42-52
869700
FIAT
1.2
No Model
75
L4
54-70
8698461
CHRYSLER
6.8
No Model
413
V8
59-77
8698461
CHRYSLER
7.0
HEMI
426
V8
66-71
8698461
CHRYSLER
7.2
No Model
440
V8
76-76
8698461
CHRYSLER
7.2
No Model
440
V8
66-73
8698461
CHRYSLER
7.2
No Model
440
V8
74-76
86G
NISSAN
2.4
STANZA
146
L4
91-98
86TM-BA
FORD
2.9
BRONCO
177
V6
86-92
86TM-BA
FORD
2.9
No Model
177
V6
87-90
870475
CHRYSLER
6.2
No Model
377
V8
46-53
8705N
GM
1.8
No Model
112
L4
81-85
605
C
HJR

Casting
Manufacturer
Liter
Model
CID Cyl
Year
870715
CHRYSLER
3.9
No Model
870715
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
237
L6
870715
CHRYSLER
4.1
No Model
42-56
251
L6
870744
CHRYSLER
3.9
No Model
42-68
237
L6
870744
CHRYSLER
4.0
42-56
No Model
241
L6
870744
CHRYSLER
4.1
32-41
No Model
251
L6
8711E
WAUKESHA
42-68
13.6
WL
831
L6
8711E
8711E
WAUKESHA
16.1
WL
982
L6
WAUKESHA
17.4
WL
1062
8711E
L6
WAUKESHA
18.8
WL
1145
L6
873706
CHRYSLER
3.9
No Model
237
L6
42-56
873706
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
874
GM
6.0
No Model
366
V8
89-90
877
GM
3.8
No Model
231
V6
78-81
877
GM
3.8
No Model
231
V6
83-87
877229
GM
3.8
GRAND NATIONAL
231
V6
86-88
877229
GM
3.8
No Model
231
V6
78
877229
GM
3.8
No Model
231
V6
79
877229
GM
3.8
No Model
231
V6
78-81
877229
GM
3.8
No Model
231
V6
82
877229
GM
3.8
No Model
231
V6
84-86
877229
GM
3.8
No Model
231
V6
85-86
877229
GM
3.8
No Model
231
V6
83
877229
GM
3.8
No Model
231
V6
84-85
877229
GM
3.8
No Model
231
V6
78-81
877229
GM
3.8
No Model
231
V6
82
877229
GM
3.8
No Model
231
V6
83-87
877229
GM
3.8
No Model
231
V6
75-77
877229
GM
3.8
No Model
231
V6
78
883550
GM
5.0
No Model
GMC
302
L6
50-57
887652N
GM
4.1
No Model
250
L6
78-80
88TM-BA
FORD
2.9
BRONCO
177
V6
86-92
88TM-BA
FORD
2.9
No Model
177
V6
87-90
8920193
GM
8.2
No Model
500
V8
80-91
8922124
DDC
8.2
FUEL PINCHER
500
V8
8922124
DDC
8.2
FUEL PINCHER
500
V8
80-89
8922124
GM
8.2
No Model
500
V8
80-91
8922124
GM
8.2
No Model
500
V8
80-91
8929238
DDC
11.1
60 SERIES
677
L6
86-04
8929239
DDC
12.7
60 SERIES
775
L6
86-04
8929413
DDC
11.1
60 SERIES
677
L6
86-04
8933002904
CHRYSLER
2.5
DAKOTA
150
L4
91-02
8933002904
CHRYSLER
2.5
No Model
150
L4
89-93
8933002904
CHRYSLER
2.5
No Model
150
L4
86-88
8933002904
CHRYSLER
2.5
No Model
150
L4
84-86
89BM6303CA
FORD
1.3
VSG-413 (2)
79
L4
89-92
8BA
FORD
3.9
No Model
239
V8
46-53
8DC1125
BUDA
10.6
No Model
648
L4
8DC1125
BUDA
18.4
No Model
1125
V8
8DC1125
BUDA
21.1
No Model
1290
V8
8DCS1125
BUDA
10.6
No Model
648
L4
8DCS1125
BUDA
18.4
No Model
1125
V8
8DCS1125
BUDA
21.1
No Model
1290
V8
8EL-6302-A
FORD
5.5
No Model
337
V8
48-52
8EQ-6303
FORD
5.5
No Model
337
V8
48-52
8F28
FORD
2.3
No Model
140
L4
89-98
8F6777
CATERPILLAR
5.1
955
312
L4
8F6777
CATERPILLAR
5.1
955
312
L4
8F-6777
CATERPILLAR
5.1
No Model
312
L4
606
VIN
G,GA

Casting
Manufacturer
Liter
Model
VIN
8F-8754
CATERPILLAR
1.4
STARTING MOTOR
83
L2
8H4529
CATERPILLAR
4.1
D311H
252
L4
8H4529
CATERPILLAR
4.1
D320
252
L4
8H4529
CATERPILLAR
4.1
D320A
252
L4
8H5320
CATERPILLAR
20.4
D342
1246
L6
8H5320
CATERPILLAR
20.4
D342
1246
L6
8H5320
CATERPILLAR
20.4
D342
1246
L6
8H5320
CATERPILLAR
20.4
D342
1246
L6
8H5320
CATERPILLAR
20.4
D342
1246
L6
8H5320
CATERPILLAR
20.4
D8
1246
L6
8H5320
CATERPILLAR
20.4
D8
1246
L6
8H5320
CATERPILLAR
20.4
D8
1246
L6
8H-5320
CATERPILLAR
20.4
13000
1246
L6
8H9354
CATERPILLAR
4.1
D2
252
L4
8H9354
CATERPILLAR
4.1
D311H
252
L4
8H9354
CATERPILLAR
4.1
D320
252
L4
8H9354
CATERPILLAR
4.1
D320A
252
L4
8HA
FORD
3.7
No Model
226
L6
47-52
8HA6303
FORD
4.2
2701C
254
L4
68-72
8HA-6303
FORD
3.7
No Model
226
L6
47-52
8M4500
CATERPILLAR
8.6
1673
CB
525
L6
8M4500
CATERPILLAR
8.6
D333
CB
525
L6
8M4502
CATERPILLAR
8.6
1673
CB
525
L6
8M4502
CATERPILLAR
8.6
D333
CB
525
L6
8M4502
CATERPILLAR
10.5
3306
CB
638
L6
8M4502
CATERPILLAR
10.5
3306
DI
638
L6
8M4502
CATERPILLAR
10.5
3306
SP
638
L6
8M4502
CATERPILLAR
10.5
3306
SP
638
L6
8M4502
CATERPILLAR
10.5
D333C
CB
638
L6
8M4502
CATERPILLAR
10.5
D333C
SP
638
L6
8M4504
CATERPILLAR
5.7
D330
CB
350
L4
8M4504
CATERPILLAR
5.7
D330
D4
350
L4
8M4506
CATERPILLAR
5.7
D330
CB
350
L4
8M4506
CATERPILLAR
5.7
D330
D4
350
L4
8M4800
CATERPILLAR
4.1
D2
252
L4
8M4800
CATERPILLAR
4.1
D311H
252
L4
8M4800
CATERPILLAR
4.1
D320
252
L4
8M4800
CATERPILLAR
4.1
D320A
252
L4
8M-4802
CATERPILLAR
4.1
D320
252
L4
8MTH
FORD
3.7
No Model
226
L6
47-52
8N
FORD
2.0
2N
120
L4
39-54
8N1910
CATERPILLAR
19.5
D346
1191
V8
8N1910
CATERPILLAR
19.5
D346
1191
V8
8N7777
CATERPILLAR
51.8
3512
3158
V 12
8N9393
CATERPILLAR
34.5
3508
2105
V8
8N9493
CATERPILLAR
69.0
3516
4210
V 16
TOYOTA
1.2
COROLLA
3K-C
90003C
GM
2.0
No Model
90003C
GM
2.0
No Model
90111
WAUKESHA
3.7
90111
WAUKESHA
90111
WAUKESHA
90111
CID Cyl
Year
71
L4
70-79
122
L4
87-88
122
L4
87-89
6BL
228
L6
4.0
6BL
245
L6
4.3
VRD
265
L6
WAUKESHA
4.6
6BL
282
L6
90156143
GM
1.8
No Model
112
L4
84-87
90156143
GM
1.8
No Model
112
L4
82-87
9016
CASE
3.0
990
185
L4
90-21-0
NISSAN
2.2
No Model
Z22E
133
L4
82-83
902280399
GM
2.0
No Model
122
L4
88-91
902280399
GM
2.0
No Model
122
L4
87-90
607
62-64

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
902280399
GM
2.0
No Model
9028036
GM
2.0
No Model
122
L4
88-90
122
L4
9028036
GM
2.0
No Model
88-91
122
L4
9028036
GM
2.0
87-90
No Model
122
L4
9028039
GM
88-90
2.0
No Model
122
L4
9028039
87-91
GM
2.0
No Model
122
L4
88-91
9028039
GM
2.0
No Model
122
L4
87-90
9028039
GM
2.0
No Model
122
L4
88-90
90280399
GM
2.0
No Model
122
L4
87-91
90280399
GM
2.0
No Model
122
L4
88-91
90280399
GM
2.0
No Model
122
L4
87-90
90409507
GM
2.0
No Model
122
L4
88-91
90409507
GM
2.0
No Model
122
L4
88-90
90409507
GM
2.0
SUNBIRD
122
L4
90-95
908292
STUDEBAKER
2.8
No Model
170
L6
55-60
908292
STUDEBAKER
2.8
No Model
170
L6
55-60
90TM-6303-AB
FORD
4.0
No Model
244
V6
90-02
90TM-AA
FORD
4.0
No Model
244
V6
90-02
90TM-AB
FORD
4.0
No Model
244
V6
90-02
90TM-AB
MAZDA
4.0
B4000
244
V6
90-98
9115
GM
6.0
No Model
366
V8
68-90
9115
GM
6.5
No Model
396
V8
65-72
9115
GM
7.0
No Model
427
V8
66-90
916
CHRYSLER
2.4
CIRRUS
148
L4
96-03
9166N
GM
1.4
CHEVETTE
85
L4
76-77
91A-6303A
FORD
3.6
No Model
221
V8
37-45
91A-6303-A
FORD
3.7
No Model
223
L6
54-64
91A-6303B
FORD
3.6
No Model
221
V8
37-45
91A-6303-B
FORD
3.7
No Model
223
L6
54-64
91H-6303B
FORD
3.6
No Model
221
V8
37-45
91H-6303-B
FORD
3.7
No Model
223
L6
54-64
91K
GM
1.0
FIREFLY
61
L3
89-00
91K
GM
1.0
SPRINT
61
L3
86-88
91TM-AA
FORD
2.9
BRONCO
177
V6
86-92
924
GM
3.4
CAMARO
207
V6
93-95
924
GM
3.4
CUTLASS
207
V6
95-97
924
GM
3.4
GRAND AM
204
V6
96-04
924
GM
3.4
No Model
207
V6
91-95
926097
JEEP
3.8
No Model
230
L6
62-65
928928
JEEP
3.8
No Model
230
L6
62-65
929
MAZDA
3.0
929
180
V6
90-96
930102014
PORSCHE
3.2
911 CARRERA
193
H6
84-89
934652
JEEP
3.8
No Model
230
L6
62-65
938M-R67
FORD
2.0
CONTOUR
122
L4
95-05
93917R1
NAVISTAR
6.1
WD-9
372
L6
49-69
944
PORSCHE
2.5
924S
42
151
L4
87-88
944
PORSCHE
2.5
944
43D
151
L4
82-88
944
PORSCHE
2.5
944
45H
151
L4
86-91
944
PORSCHE
2.5
944
46
151
L4
88
944
PORSCHE
2.5
944
47
151
L4
89
944
PORSCHE
2.5
944S
45J
151
L4
87-88
95011-A
WAUKESHA
0.0
6NK
L6
95156143
GM
1.8
No Model
112
L4
84-87
952068
CHRYSLER
3.5
No Model
218
L6
33-56
952068
CHRYSLER
3.6
No Model
218
L6
65-71
954
GM
4.1
No Model
250
L6
77-78
954
GM
4.1
No Model
250
L6
66-75
954418
CHRYSLER
3.9
No Model
237
L6
42-56
954418
CHRYSLER
3.9
No Model
G,GA
237
L6
42-56
2
2
JE
608

Casting
Manufacturer
Liter
Model
VIN
955194
CHRYSLER
3.6
No Model
955194
CHRYSLER
3.9
No Model
955194
CHRYSLER
3.9
No Model
G,GA
96001
TOYOTA
1.5
4P
96011-A
WAUKESHA
0.0
6EL
96032
GM
6.2
No Model
9613
FORD
2.3
No Model
9613
FORD
2.3
9613
FORD
9613
CID Cyl
Year
218
L6
65-71
237
L6
42-56
237
L6
42-56
91
L4
L6
379
V6
73-76
140
L4
89-98
No Model
140
L4
91-93
2.3
No Model
140
L4
80-87
FORD
2.3
No Model
140
L4
79-80
9613
FORD
2.3
No Model
140
L4
74-75
9613
FORD
2.3
No Model
140
L4
76-79
9613
FORD
2.3
No Model
140
L4
83-85
966441
CASE
6.2
500
377
L6
966441
CASE
6.2
600 & 900
GAS
377
L6
966441
CASE
6.2
600 & 900
TURBO
377
L6
966441
CASE
6.2
900
DIESL
377
L6
966441
CASE
6.2
930
377
L6
966441
CASE
7.4
1030
DIESL
451
L6
966441
CASE
7.4
1070
451
L6
966441
CASE
8.3
2090
504
L6
966772
CASE
4.9
830
301
L4
9667731
CASE
2.7
350 TRACTOR
164
L4
967731
CASE
2.4
310 & 580
G(1)
148
L4
968488
CASE
6.2
930
377
L6
968488
CASE
6.2
970
BG
377
L6
968488
CASE
8.3
2090
504
L6
969052
CASE
8.3
2290
BDT(2
504
L6
9690528
CASE
8.3
2290
BDT(2
504
L6
969267
CASE
8.3
1370
BDT
504
L6
96TM-AA
FORD
4.0
No Model
244
V6
90-02
96TM-AA
MAZDA
4.0
B4000
244
V6
90-98
97011B
WAUKESHA
31.2
NKD
1905
L6
97011B
WAUKESHA
31.2
NKR
1905
L6
97011C
WAUKESHA
31.2
NKD
1905
L6
97011C
WAUKESHA
31.2
NKR
1905
L6
97111
WAUKESHA
31.2
NKD
1905
L6
97111
WAUKESHA
31.2
NKR
1905
L6
97111-A
WAUKESHA
31.2
NKD
1905
L6
97111-A
WAUKESHA
31.2
NKR
1905
L6
976321
CASE
3.1
430
188
L4
976321
CASE
3.4
450B
207
L4
976321
CASE
3.4
450B
DT
207
L4
9770488
GM
6.9
BONNEVILLE
421
V8
61-66
9770488
GM
6.9
BONNEVILLE
421
V8
61-66
9770488
GM
7.0
No Model
428
V8
67-69
9773382
GM
5.3
No Model
326
V8
63-67
9773382
GM
6.4
No Model
389
389
V8
59-66
9773382
GM
6.6
FIREBIRD
400
V8
67-79
9773382
GM
6.6
No Model
400
V8
72-75
9773382
GM
6.6
No Model
400
V8
75-75
9773382
GM
6.6
No Model
400
V8
72-77
9773382
GM
6.6
No Model
400
V8
77-79
9773383
GM
5.3
No Model
326
V8
63-67
9773383
GM
6.4
No Model
389
389
V8
59-66
9773383
GM
6.6
FIREBIRD
400
V8
67-79
9773383
GM
6.6
No Model
400
V8
72-75
9773383
GM
6.6
No Model
400
V8
74-75
9773383
GM
6.6
No Model
400
V8
75-75
609
60-70
61-66

Casting
Manufacturer
Liter
Model
CID Cyl
Year
9773383
GM
6.6
No Model
9773383
GM
6.6
No Model
400
V8
72-77
400
V8
9773384
GM
6.9
BONNEVILLE
77-79
421
V8
9773384
GM
6.9
61-66
BONNEVILLE
421
V8
9773384
GM
61-66
6.9
BONNEVILLE
421
V8
9773384
61-66
GM
7.0
No Model
428
V8
67-69
9773524
GM
5.3
No Model
326
V8
63-67
9773524
GM
5.7
No Model
350
V8
68-77
9773524
GM
6.6
FIREBIRD
400
V8
67-79
9773524
GM
6.6
FIREBIRD
400
V8
67-79
9773524
GM
6.6
No Model
400
V8
72-75
9773524
GM
6.6
No Model
400
V8
72-75
9773524
GM
6.6
No Model
400
V8
74-75
9773524
GM
6.6
No Model
400
V8
74-75
9773524
GM
6.6
No Model
400
V8
75-75
9773524
GM
6.6
No Model
400
V8
72-77
9773524
GM
6.6
No Model
400
V8
77-79
9773524
GM
6.6
No Model
400
V8
77-79
9773573
GM
5.3
No Model
326
V8
63-67
9773573
GM
6.6
FIREBIRD
400
V8
67-79
9773573
GM
6.6
No Model
400
V8
72-75
9773573
GM
6.6
No Model
400
V8
74-75
9773573
GM
6.6
No Model
400
V8
75-75
9773573
GM
6.6
No Model
400
V8
72-77
9773573
GM
6.6
No Model
400
V8
77-79
9782279
GM
3.5
TEMPEST
215
L6
64-65
9782279
GM
3.8
No Model
230
L6
63-70
9782646
GM
5.3
No Model
326
V8
63-67
9782646
GM
5.7
No Model
350
V8
68-77
9782646
GM
6.6
FIREBIRD
400
V8
67-79
9782646
GM
6.6
FIREBIRD
400
V8
67-79
9782646
GM
6.6
No Model
400
V8
72-75
9782646
GM
6.6
No Model
400
V8
72-75
9782646
GM
6.6
No Model
400
V8
74-75
9782646
GM
6.6
No Model
400
V8
74-75
9782646
GM
6.6
No Model
400
V8
75-75
9782646
GM
6.6
No Model
400
V8
72-77
9782646
GM
6.6
No Model
400
V8
77-79
9782646
GM
6.6
No Model
400
V8
77-79
9782769
GM
6.9
BONNEVILLE
421
V8
61-66
9782769
GM
6.9
BONNEVILLE
421
V8
61-66
9782769
GM
7.0
No Model
428
V8
67-69
9782770
GM
5.3
No Model
326
V8
63-67
9782770
GM
5.7
No Model
350
V8
68-77
9782770
GM
6.4
No Model
389
389
V8
59-66
9782770
GM
6.6
FIREBIRD
400
V8
67-79
9782770
GM
6.6
No Model
400
V8
72-75
9782770
GM
6.6
No Model
400
V8
74-75
9782770
GM
6.6
No Model
400
V8
75-75
9782770
GM
6.6
No Model
400
V8
72-77
9782770
GM
6.6
No Model
400
V8
77-79
9782786
GM
6.4
No Model
389
389
V8
59-66
9783785
GM
5.3
No Model
326
V8
63-67
9783785
GM
6.4
No Model
389
389
V8
59-66
9783786
GM
5.3
No Model
326
V8
63-67
9783786
GM
6.4
No Model
389
389
V8
59-66
9783786
GM
6.6
FIREBIRD
400
V8
67-79
9783786
GM
6.6
No Model
400
V8
72-75
9783786
GM
6.6
No Model
400
V8
74-75
610
VIN

Casting
Manufacturer
Liter
Model
CID Cyl
Year
9783786
GM
6.6
No Model
9783786
GM
6.6
No Model
400
V8
75-75
400
V8
9783786
GM
6.6
No Model
72-77
400
V8
9783787
GM
6.9
77-79
BONNEVILLE
421
V8
9783787
GM
61-66
6.9
BONNEVILLE
421
V8
9783787
61-66
GM
7.0
No Model
428
V8
67-69
97926
JOHN DEERE
3.9
4039D
239
L4
97928
JOHN DEERE
3.9
4039D
239
L4
9793573
GM
5.3
No Model
326
V8
63-67
9793573
GM
5.7
No Model
350
V8
70-75
9793573
GM
5.7
No Model
350
V8
83-86
9793573
GM
5.7
No Model
350
V8
74
9793573
GM
5.7
No Model
350
V8
68-77
9793573
GM
6.6
FIREBIRD
400
V8
67-79
9793573
GM
6.6
No Model
400
V8
72-75
9793573
GM
6.6
No Model
400
V8
74-75
9793573
GM
6.6
No Model
400
V8
75-75
9793573
GM
6.6
No Model
400
V8
72-77
9793573
GM
6.6
No Model
400
V8
77-79
9794054
GM
5.3
No Model
326
V8
63-67
97954
GM
5.3
No Model
326
V8
63-67
97954
GM
5.7
No Model
350
V8
68-77
97954
GM
6.6
FIREBIRD
400
V8
67-79
97954
GM
6.6
No Model
400
V8
75-75
97954
GM
6.6
No Model
400
V8
77-79
9795479
GM
5.3
No Model
326
V8
63-67
9795479
GM
6.6
FIREBIRD
400
V8
67-79
9795479
GM
6.6
FIREBIRD
400
V8
67-79
9795479
GM
6.6
No Model
400
V8
72-75
9795479
GM
6.6
No Model
400
V8
72-75
9795479
GM
6.6
No Model
400
V8
74-75
9795479
GM
6.6
No Model
400
V8
74-75
9795479
GM
6.6
No Model
400
V8
75-75
9795479
GM
6.6
No Model
400
V8
72-77
9795479
GM
6.6
No Model
400
V8
77-79
9795479
GM
6.6
No Model
400
V8
77-79
9799103
GM
7.5
No Model
455
V8
70-76
9799103
GM
7.5
No Model
455
V8
71-76
9799103
GM
7.5
No Model
X&Y
455
V8
71-76
97JM
FORD
4.0
EXPLORER
245
V6
00-04
97JM
FORD
4.0
EXPLORER,MOUNTAINEER
244
V6
97-01
97JM
FORD
4.0
EXPLORER,MOUNTAINEER
244
V6
97-01
97TM-
FORD
4.0
No Model
244
V6
90-02
9806
ISUZU
5.8
6BD1
353
L6
76-88
981
GM
3.1
FIREBIRD
191
V6
89-94
981
GM
3.1
GRAND PRIX
191
V6
89-90
981
GM
3.1
LUMINA
191
V6
90-95
981
GM
3.1
No Model
191
V6
00-03
981
GM
3.1
No Model
191
V6
93-99
981
GM
3.4
CUTLASS
207
V6
95-97
981
GM
3.4
No Model
207
V6
91-95
981
ISUZU
3.1
TROOPER II
189
V6
91-94
9811
WAUKESHA
0.0
HL
L4
98698B
FIAT
0.5
No Model
30
L4
57-60
98698B
FIAT
0.5
No Model
30
L4
57-60
990
CASE
2.5
880
154
L3
990
CASE
2.5
880
154
L3
990
CASE
2.7
885
164
L3
99A-6303
FORD
3.9
No Model
239
V8
611
VIN
46-53

Casting
Manufacturer
Liter
Model
9F-8405
CATERPILLAR
0.9
No Model
54
L2
9H1260
CATERPILLAR
1.4
STARTING MOTOR
83
L2
9H2725
CATERPILLAR
5.7
D330
CB
350
L4
9H2725
CATERPILLAR
5.7
D330
D4
350
L4
9H9082
CATERPILLAR
13.6
D339
831
L4
9H9082
CATERPILLAR
13.6
D339
831
L4
9H9082
CATERPILLAR
13.6
D339
831
L4
9H9082
CATERPILLAR
13.6
D7
831
L4
9H9854
CATERPILLAR
8.6
1673
CB
525
L6
9H9854
CATERPILLAR
8.6
D333
CB
525
L6
9H9917
CATERPILLAR
12.2
D326
744
L6
9H9917
CATERPILLAR
12.2
D337
744
L6
9L8012
CATERPILLAR
9.4
1150
573
V8
9L8012
CATERPILLAR
10.4
3150
636
V8
9L8013
CATERPILLAR
10.4
1160
636
V8
9L8013
CATERPILLAR
10.4
3160
636
V8
9L8112
CATERPILLAR
9.4
1150
573
V8
9L8112
CATERPILLAR
10.4
3150
636
V8
9L8123
CATERPILLAR
8.6
1140
522
V8
9L8123
CATERPILLAR
8.6
1145
522
V8
9L8123
CATERPILLAR
8.6
3140
522
V8
9L8123
CATERPILLAR
8.6
3145
522
V8
9L8400
CATERPILLAR
10.4
1160
636
V8
9L8400
CATERPILLAR
10.4
3160
636
V8
9L9230
CATERPILLAR
8.6
1140
522
V8
9L9230
CATERPILLAR
8.6
1145
522
V8
9L9230
CATERPILLAR
8.6
3140
522
V8
9L9230
CATERPILLAR
8.6
3145
522
V8
9L9231
CATERPILLAR
9.4
1150
573
V8
9L9231
CATERPILLAR
10.4
3150
636
V8
9L9232
CATERPILLAR
10.4
1160
636
V8
9L9232
CATERPILLAR
10.4
3160
636
V8
9M2336
CATERPILLAR
8.6
1673
CB
525
L6
9M2336
CATERPILLAR
8.6
D333
CB
525
L6
9N
FORD
2.0
2N
120
L4
9N0300
CATERPILLAR
10.4
3208
636
V8
9N0300
CATERPILLAR
10.4
3208
636
V8
9N0300
CATERPILLAR
10.4
3208
636
V8
9N0300
CATERPILLAR
10.4
3208
TURBO
636
V8
9N0303
CATERPILLAR
10.4
3208
636
V8
9N0303
CATERPILLAR
10.4
3208
636
V8
9N0303
CATERPILLAR
10.4
3208
636
V8
9N0303
CATERPILLAR
10.4
3208
TURBO
636
V8
9N300
CATERPILLAR
10.4
3208
636
V8
9N300
CATERPILLAR
10.4
3208
636
V8
9N300
CATERPILLAR
10.4
3208
636
V8
9N300
CATERPILLAR
10.4
3208
TURBO
636
V8
9N303
CATERPILLAR
10.4
3208
636
V8
9N303
CATERPILLAR
10.4
3208
636
V8
9N6015
CATERPILLAR
10.4
1160
636
V8
9N6015
CATERPILLAR
10.4
3160
636
V8
9N6202
CATERPILLAR
10.4
3208
636
V8
9N6202
CATERPILLAR
10.4
3208
636
V8
9N6202
CATERPILLAR
10.4
3208
636
V8
9N6202
CATERPILLAR
10.4
3208
TURBO
636
V8
9N6220
CATERPILLAR
10.4
3208
636
V8
9N6220
CATERPILLAR
10.4
3208
636
V8
9N6220
CATERPILLAR
10.4
3208
636
V8
9N6220
CATERPILLAR
10.4
3208
TURBO
636
V8
612
VIN
CID Cyl
Year
39-54
87-92
87-92
87-92
87-92
87-92

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
9S0123
CATERPILLAR
10.5
1674
638
L6
9S0123
CATERPILLAR
10.5
1674
638
L6
9S0123
CATERPILLAR
10.5
1674
638
L6
9S0123
CATERPILLAR
10.5
D334
638
L6
9S0123
CATERPILLAR
10.5
D334
638
L6
9S0123
CATERPILLAR
10.5
D334
638
L6
9S1994
CATERPILLAR
29.3
D348
9S2270
CATERPILLAR
8.6
1673
CB
525
L6
9S2270
CATERPILLAR
8.6
D333
CB
525
L6
9S2270
CATERPILLAR
10.5
1673C
CB
638
L6
9S2270
CATERPILLAR
10.5
1673C
SP
638
L6
9S2270
CATERPILLAR
10.5
3306
CB
638
L6
9S2270
CATERPILLAR
10.5
3306
DI
638
L6
9S2270
CATERPILLAR
10.5
3306
SP
638
L6
9S2270
CATERPILLAR
10.5
3306
SP
638
L6
9S2270
CATERPILLAR
10.5
3306
SP
638
L6
9S2270
CATERPILLAR
10.5
334
638
L6
9S2270
CATERPILLAR
10.5
D333C
CB
638
L6
9S2270
CATERPILLAR
10.5
D333C
SP
638
L6
9S2303
CATERPILLAR
19.5
D346
1191
V8
9S2303
CATERPILLAR
19.5
D346
1191
V8
9S3012
CATERPILLAR
14.6
1693
893
L6
9S3012
CATERPILLAR
14.6
1693
893
L6
9S3012
CATERPILLAR
14.6
1693
893
L6
9S3012
CATERPILLAR
14.6
1693
893
L6
9S771
CATERPILLAR
7.0
3304
DI
425
L4
9S8662
CATERPILLAR
39.0
D349
2382
9Y5706
CATERPILLAR
10.3
3176
629
L6
9Y9112
CATERPILLAR
14.6
3406
893
L6
9Y9112
CATERPILLAR
14.6
3406
893
L6
91-95
FORD
5.8
No Model
352
V8
58-67
KUBOTA
1.1
L235, L245
68
L3
A//B8
ALFA ROMEO
2.5
MILANO
119
152
V6
81-89
A0638
NISSAN
1.6
No Model
R16
98
L4
66-68
A0638
NISSAN
1.6
No Model
R16
98
L4
69-70
A102
JOHN DEERE
5.0
303
303
L6
A102
JOHN DEERE
5.0
JD550
303
L6
A102R
JOHN DEERE
5.0
303
303
L6
A102R
JOHN DEERE
5.0
JD550
303
L6
A12M
RENAULT
1.0
No Model
58
L4
62-67
A12M
RENAULT
1.1
No Model
68
L4
59-71
A-12V-5001
CLIMAX
53.0
No Model
A-12V-5001
CLIMAX
61.0
No Model
A1320
CUMMINS
14.0
NH230
NH
A138818
CASE
8.3
1370
BDT
A138818
CASE
8.3
2290
BDT(2
A1456
AUDI
1.5
No Model
A1456
AUDI
1.6
No Model
A1456
AUDI
1.7
No Model
A1456
VOLKSWAGEN
1.5
No Model
A1456
VOLKSWAGEN
1.5
A1456
VOLKSWAGEN
A-1612Z1
DEUTZ
A1740
A1D
1786
Year
V 12
V 16
89-96
3232
L 12
3710
L 12
855
L6
504
L6
504
L6
XV
90
L4
73-74
YG
97
L4
75-80
105
L4
81-83
FX
89
L4
78-80
RABBIT
EH
89
L4
78-79
1.5
RABBIT
FC
89
L4
73-75
13.4
BF8L513
817
L8
CUMMINS
4.1
No Model
251
L4
CHRYSLER
3.5
No Model
215
V6
93-97
A1D
CHRYSLER
3.5
No Model
215
V6
98-02
A1D
CHRYSLER
3.5
No Model
215
V6
02-04
A1D
CHRYSLER
3.5
No Model
215
V6
02-04
A1D
CHRYSLER
3.5
No Model
215
V6
02-04
613

Casting
Manufacturer
Liter
Model
A22578
CASE
4.9
830
A2360R
JOHN DEERE
5.3
A301
FORD
1.3
FESTIVA,ASPIRE
A3320R
JOHN DEERE
5.3
A3322R
JOHN DEERE
A339R2
VIN
CID Cyl
Year
301
L4
60-70
321
L2
34-52
81
L4
89-97
321
L2
34-52
5.3
321
L2
34-52
NAVISTAR
3.4
584
D206
206
L4
A39151
CASE
3.1
430
188
L4
A399
DDC
5.2
6V-53
318
V6
A4202R
JOHN DEERE
5.3
321
L2
34-52
A4390R
JOHN DEERE
5.3
321
L2
34-52
A4395R
JOHN DEERE
5.3
321
L2
34-52
A-472
HERCULES
2.7
G1600
163
L4
A4902R
JOHN DEERE
5.3
60
321
L2
A4902R
JOHN DEERE
5.3
321
L2
34-52
A-6303
FORD
3.3
200
L4
28-32
A-6303-A
FORD
3.3
200
L4
28-32
A65097
CASE
8.3
1370
BDT
504
L6
A65097
CASE
8.3
2290
BDT(2
504
L6
A66722
CASE
8.3
1370
BDT
504
L6
A66722
CASE
8.3
2290
BDT(2
504
L6
A66772
CASE
8.3
1370
BDT
504
L6
A66772
CASE
8.3
2290
BDT(2
504
L6
A77147
CASE
8.3
1370
BDT
504
L6
A77147
CASE
8.3
2290
BDT(2
504
L6
A87
NISSAN
1.8
No Model
L18
108
L4
73-74
A870
NISSAN
1.8
No Model
L18
108
L4
73-74
A9
KUBOTA
1.9
CT4-114
114
L4
A9
KUBOTA
1.9
V1902-B
114
L4
A906675MF
CASE
2.5
880
154
L3
A906675MF
CASE
2.5
880
154
L3
A906675MF
CASE
2.7
885
164
L3
AD
CHRYSLER
3.0
No Model
181
V6
91-92
AD
CHRYSLER
3.0
No Model
181
V6
91-92
AD
MITSUBISHI
3.0
3000GT
181
V6
93-98
AD
OPEL
1.1
No Model
66
L4
65-73
AO9-7292
NAVISTAR
4.4
510B
268
L4
75-85
AR35010
JOHN DEERE
8.7
5010, 5020
531
L6
AR35010
JOHN DEERE
8.7
6030
531
L6
60-81
AR35010
JOHN DEERE
10.2
619
619
L6
68-81
AR69264
JOHN DEERE
8.7
6030
531
L6
60-81
AR69264
JOHN DEERE
10.2
619
619
L6
68-81
AR78403
JOHN DEERE
10.2
619
619
L6
68-81
AV-1250-C
CLIMAX
53.0
No Model
3232
L 12
AV-1250-C
CLIMAX
61.0
No Model
3710
L 12
AV-50-D
CLIMAX
53.0
No Model
3232
L 12
AV-50-D
CLIMAX
61.0
No Model
3710
L 12
AY
GM
2.2
LUV
137
L4
AY
ISUZU
2.2
D201
136
L4
AY
ISUZU
2.2
No Model
136
L4
86-87
AY
ISUZU
2.2
No Model
136
L4
85-87
MAZDA
1.6
No Model
97
L4
70-81
B114R
JOHN DEERE
2.9
No Model
175
L2
B114R
JOHN DEERE
3.1
No Model
190
L2
B114R
JOHN DEERE
3.1
No Model
190
L2
B1303R
JOHN DEERE
2.4
149
L2
B1303R
JOHN DEERE
2.9
175
L2
B1303R
JOHN DEERE
2.9
No Model
175
L2
B1303R
JOHN DEERE
3.1
No Model
190
L2
B1303R
JOHN DEERE
3.1
No Model
190
L2
D
H
EARLY
614
81-85
32-46

Casting
Manufacturer
Liter
Model
VIN
B1340R
JOHN DEERE
2.9
No Model
175
L2
B1340R
JOHN DEERE
3.1
No Model
190
L2
B1340R
JOHN DEERE
3.1
No Model
190
L2
B1443
LEYLAND
3.4
4-272
207
L4
B1847R
JOHN DEERE
2.9
No Model
175
L2
B1847R
JOHN DEERE
3.1
No Model
190
L2
B1847R
JOHN DEERE
3.1
No Model
190
L2
B1937
BUDA
0.6
1BD38
38
L1
B2097W
ALLIS CHALMERS
2.5
No Model
153
L4
B2097W
ALLIS CHALMERS
2.9
No Model
175
L4
B2097W
BUDA
2.5
No Model
153
L4
B2097W
BUDA
2.9
4BD175
BD
175
L4
B2097W
BUDA
2.9
No Model
175
L4
B2097W
BUDA
3.0
No Model
182
L4
B-2097W
ALLIS CHALMERS
2.5
153
153
L4
B-2097W
ALLIS CHALMERS
2.9
D15
175
L4
B-2097-W
ALLIS CHALMERS
2.5
153
153
L4
B2106
ALLIS CHALMERS
3.8
G-230
230
L6
B2106
ALLIS CHALMERS
4.3
D17
262
L6
B2106
ALLIS CHALMERS
4.3
D19
262
L6
B2106
ALLIS CHALMERS
4.5
273
273
L6
B2106
ALLIS CHALMERS
4.5
No Model
273
L6
B2106
BUDA
3.8
No Model
230
L6
B2106
BUDA
4.3
DD262
262
L6
B2106
BUDA
4.5
No Model
273
L6
B-2106
ALLIS CHALMERS
3.8
D17
230
L6
B-2106
ALLIS CHALMERS
3.8
WD45
230
L6
B2107
ALLIS CHALMERS
3.8
G-230
230
L6
B2107
ALLIS CHALMERS
4.3
D17
262
L6
B2107
ALLIS CHALMERS
4.3
D19
262
L6
B2107
ALLIS CHALMERS
4.5
273
273
L6
B2107
BUDA
3.8
No Model
230
L6
B2107
BUDA
4.3
DD262
262
L6
B2107
BUDA
4.5
No Model
273
L6
B-2107
ALLIS CHALMERS
3.8
D17
230
L6
B-2107
ALLIS CHALMERS
3.8
WD45
230
L6
B2460R
JOHN DEERE
2.4
EARLY
149
L2
B2460R
JOHN DEERE
2.9
175
L2
B2460R
JOHN DEERE
2.9
No Model
175
L2
B2460R
JOHN DEERE
3.1
No Model
190
L2
B2460R
JOHN DEERE
3.1
No Model
190
L2
B301
FORD
1.3
FESTIVA
81
L4
88-89
B301
FORD
1.3
FESTIVA,ASPIRE
81
L4
89-97
B3019R
JOHN DEERE
3.1
50
190
L2
35-45
B3200
ALLIS CHALMERS
2.5
No Model
153
L4
B3200
ALLIS CHALMERS
2.9
No Model
175
L4
B3200
BUDA
2.5
No Model
153
L4
B3200
BUDA
2.9
4BD175
BD
175
L4
B3200
BUDA
2.9
No Model
175
L4
B3200
BUDA
3.0
No Model
182
L4
B-3200
ALLIS CHALMERS
2.5
153
153
L4
B-3200
ALLIS CHALMERS
2.5
153
153
L4
B-3200
ALLIS CHALMERS
2.9
D15
175
L4
B3729R
JOHN DEERE
0.0
190
L4
B3729R
JOHN DEERE
3.1
520
190
L2
B3C7
MAZDA
1.5
PROTG
91
L4
95-98
B4A-6303-B
FORD
4.8
No Model
292
V8
55-66
B4A-B
FORD
4.4
No Model
272
V8
56-66
B512
LEROI
49.1
No Model
3000
V 12
D
D
D
D
615
Z5
CID Cyl
Year
32-46

Casting
Manufacturer
Liter
Model
B55-A
FORD
4.4
No Model
B5960
BUDA
2.5
No Model
B5960
BUDA
2.9
4BD175
B5960
BUDA
2.9
No Model
B-5960
ALLIS CHALMERS
2.9
D15
B-5960
MILITARY STD
2.5
B5A-6303-B
FORD
B5Q-6303-A
CID Cyl
Year
272
V8
56-66
153
L4
BD
175
L4
175
L4
175
L4
No Model
153
L4
4.8
No Model
292
V8
55-66
FORD
5.2
No Model
317
V8
52-55
B5Q-6303-A
FORD
5.6
No Model
341
V8
55
B5S-6303-A
FORD
4.8
No Model
292
V8
55-66
B5S-6303-B
FORD
4.8
No Model
292
V8
55-66
B600C-304
CONTINENTAL
6.6
No Model
405
L6
B600C-307
CONTINENTAL
7.0
No Model
TD
427
L6
B600C-307
CONTINENTAL
7.0
T427
B&T
427
L6
B600C-307
CONTINENTAL
8.2
U501
501
L6
B600C-308
CONTINENTAL
7.0
No Model
TD
427
L6
B600C-308
CONTINENTAL
7.0
T427
B&T
427
L6
B600C-308
CONTINENTAL
8.2
U501
501
L6
B600C-500
CONTINENTAL
6.6
No Model
405
L6
B600C-501
CONTINENTAL
7.0
No Model
TD
427
L6
B600C-501
CONTINENTAL
7.0
T427
B&T
427
L6
B600C-501
CONTINENTAL
8.2
U501
501
L6
B600C601
MACK
3.4
No Model
209
L6
B602C-304
CONTINENTAL
7.0
No Model
TD
427
L6
B602C-304
CONTINENTAL
7.0
T427
B&T
427
L6
B602C-304
CONTINENTAL
8.2
U501
501
L6
B602C-307
CONTINENTAL
7.0
No Model
TD
427
L6
B602C-307
CONTINENTAL
7.0
T427
B&T
427
L6
B602C-307
CONTINENTAL
8.2
U501
501
L6
B616
FORD
1.6
CAPRI
98
L4
91-94
B616
FORD
1.6
CAPRI,TRACER
98
L4
91-94
B630
FORD
1.6
CAPRI,TRACER
98
L4
91-94
B630
FORD
1.6
TRACER
98
L4
87-92
B630
MAZDA
1.6
323
B6
97
L4
87-92
B630
MAZDA
1.6
323
B6
97
L4
93-94
B630
MAZDA
1.6
323
B6
98
L4
85-86
B657
FORD
1.6
CAPRI
98
L4
91-94
B657
FORD
1.6
CAPRI,TRACER
98
L4
91-94
B657
FORD
1.8
ESCORT,TRACER
112
L4
91-98
B657
MAZDA
1.6
MIATA
BP
98
L4
90-92
B657
MAZDA
1.8
MIATA
BP
112
L4
90-96
B6S
MAZDA
1.6
MIATA
B6
98
L4
90-95
B6S7
KIA
1.6
SEPHIA
97
L4
94-96
B7
TOYOTA
3.0
AVALON
1MZFE
183
V6
94-02
B767R
JOHN DEERE
2.9
No Model
175
L2
B767R
JOHN DEERE
3.1
No Model
190
L2
B767R
JOHN DEERE
3.1
No Model
190
L2
B769
BUDA
0.6
1BD38
38
L1
B78354
JEEP
3.7
No Model
226
L6
54-65
B9ME-D
FORD
7.0
EDSEL
430
V8
58-65
B9NN
FORD
2.8
No Model
172
L4
53-80
B9NN-6202-B
FORD
2.2
134
L4
54-60
B9NN-6202-B
FORD
2.3
No Model
140
L4
74-75
B9NN-6202-B
FORD
2.3
No Model
140
L4
83-85
B9NN-6302-B
FORD
2.8
No Model
172
L4
55-60
B9NN-6302-B
FORD
3.1
No Model
192
L4
65-72
B9NN-6302-B
FORD
3.1
No Model
192
L4
64-79
BA-6303
FORD
3.9
No Model
239
V8
46-53
BB
OPEL
1.9
No Model
116
L4
67-75
616
VIN

Casting
Manufacturer
Liter
Model
VIN
BB-14K
NAVISTAR
2.2
F-12
FL
132
L4
BB38AX
AUSTIN
1.2
No Model
73
L4
54-59
BB38AX
AUSTIN
1.5
No Model
91
L4
54-61
BB-38-AX
AUSTIN
1.6
No Model
99
L4
61-72
BB-38-AX
MG
1.2
No Model
73
L4
54-61
BB-38-AX
MG
1.5
No Model
91
L4
54-59
BB-38-AX
MG
1.6
MARK II
99
L4
61-62
BB-38-AX
MG
1.6
MARK II
99
L4
61-62
BD14A
WAUKESHA
1.9
113
113
L4
BD14A
WAUKESHA
1.9
113
113
L4
BD14A
WAUKESHA
2.2
180DLC
133
L4
BD-14A
CASE
1.6
No Model
95
L4
BD-14A
CASE
2.0
VA & VAE
124
L4
BD-14A
NAVISTAR
2.2
F-12
132
L4
BD14K
WAUKESHA
1.9
113
113
L4
BD14K
WAUKESHA
2.2
180DLC
133
L4
BD-14K
CASE
1.6
No Model
95
L4
BD-14K
CASE
2.0
VA & VAE
124
L4
BD-14K
NAVISTAR
2.2
F-12
FL
132
L4
BE53B
AUSTIN
0.9
No Model
58
L4
52-62
BE53B
AUSTIN
0.9
SPRITE
58
L4
56-65
BE-53-B
AUSTIN
0.9
No Model
58
L4
52-62
BE-53-B
MG
0.9
MK I, MK II, MIDGET
58
L4
52-62
BE-53-B
MG
0.9
SPRITE MK I
58
L4
61-62
BF
KUBOTA
1.4
D1402-B
85
L3
BF
KUBOTA
1.4
D1402-DI
BHV
CHRYSLER
3.5
No Model
BK947
LEYLAND
3.4
4-272
BLUE
VOLKSWAGEN
2.1
VANAGON
BP
GM
1.8
LUV
BP
GM
1.8
LUV
BT793
AUSTIN
1.2
BT793
AUSTIN
BT-79-3
FL
CID Cyl
Year
85
L3
215
V6
207
L4
129
H4
86-91
110
L4
76-86
110
L4
72-75
No Model
73
L4
54-59
1.6
No Model
99
L4
61-72
MG
1.2
No Model
73
L4
54-61
BT-79-3
MG
1.5
No Model
91
L4
54-59
BT-79-3
MG
1.6
MARK II
99
L4
61-62
BT-79-3
MG
1.6
MARK II
99
L4
61-62
BT793X
AUSTIN
1.5
No Model
91
L4
54-61
VOLVO
2.0
No Model
B20E
121
L4
71-73
VOLVO
2.0
No Model
B20E
121
L4
71-73
VOLVO
2.0
No Model
B20F
121
L4
74-75
VOLVO
2.0
No Model
B20F
121
L4
74-75
C.8308001
RENAULT
0.6
No Model
37
L4
45-58
C.8308001
RENAULT
0.7
No Model
46
L4
59-69
C.8308001
RENAULT
0.8
No Model
52
L4
45-71
C0AE-A
FORD
5.4
No Model
LD
330
V8
62-65
C0AE-B
FORD
5.4
No Model
HD
330
V8
66-76
C0AE-B
FORD
5.4
No Model
LD
330
V8
62-65
C0AE-B
FORD
5.8
No Model
352
V8
58-67
C0AE-B
FORD
5.9
No Model
360
V8
68-78
C0NN
FORD
2.2
134
L4
54-60
C0NN
FORD
2.4
501
IND
144
L4
61-67
C0NN
FORD
2.4
No Model
GAS
144
L4
61-67
C0NN
FORD
2.8
No Model
172
L4
53-80
C0NN-C
FORD
2.8
No Model
172
L4
53-80
C1
TOYOTA
2.4
4-RUNNER
22R-T
144
L4
85-87
C1043
HERCULES
0.9
NXA
57
L2
C1043
HERCULES
1.8
IXA, IXB3
113
L4
C1043
HERCULES
2.2
IXA, IXB3
133
L4
617
F
MV
93-97

Casting
Manufacturer
Liter
Model
C1043
HERCULES
2.2
IXA, IXB3
133
L4
C1046
HERCULES
5.6
No Model
JXLD
339
L6
C1046
JAGUAR
3.4
XK140
210
L6
61-65
C1046
JAGUAR
3.8
No Model
230
L6
55-64
C116-LM
PACKARD
4.6
No Model
282
L8
35-47
C116-LM
STUDEBAKER
4.6
No Model
282
L8
39-47
C1AE
FORD
6.4
No Model
390
V8
61-76
C1AE
FORD
6.4
No Model
390
V8
68-76
C1AE-A
FORD
6.4
No Model
390
V8
61-76
C1AE-A
FORD
6.4
No Model
390
V8
68-76
C1AE-A
FORD
6.7
No Model
406
V8
62-63
C1AE-B
FORD
3.5
No Model
215
L6
52-53
C1AE-B
FORD
3.7
No Model
223
L6
54-64
C1AE-F
FORD
3.5
No Model
215
L6
52-53
C1AE-F
FORD
3.7
No Model
223
L6
54-64
C1AE-G
FORD
5.4
No Model
LD
330
V8
62-65
C1AE-G
FORD
6.4
No Model
390
V8
61-76
C1AE-G
FORD
6.4
No Model
390
V8
68-76
C-1-K
TOYOTA
2.0
CELICA
18R-C
120
L4
71-74
C1TE
FORD
4.3
No Model
262
L6
61-64
C1TE
FORD
4.4
No Model
272
V8
56-66
C1TE
FORD
4.8
No Model
292
V8
55-66
C1TE-6303-B
FORD
7.8
No Model
475
V8
73-79
C1TE-6303-B
FORD
7.8
No Model
477
V8
78-81
C1TE-6303-C
FORD
8.8
No Model
534
V8
58-81
C1TE-6303F1
FORD
4.8
No Model
292
V8
55-66
C1TE-B
FORD
6.6
No Model
401
V8
58-76
C1TE-B
FORD
7.8
No Model
475
V8
73-79
C1TE-B
FORD
7.8
No Model
477
V8
78-81
C1TE-C
FORD
8.8
No Model
534
V8
58-81
C1TE-F
FORD
4.8
No Model
292
V8
55-66
C1TE-F1
FORD
4.8
No Model
292
V8
55-66
C1TE-H
FORD
4.3
No Model
262
L6
61-64
C1VE
FORD
6.3
No Model
383
V8
57-61
C1VE-A
FORD
6.3
No Model
383
V8
57-61
C2107
ALLIS CHALMERS
4.5
No Model
273
L6
C22109
HILLMAN
1.4
No Model
85
L4
55-65
C22109
HILLMAN
1.5
No Model
91
L4
57-61
C2AE-B
FORD
6.4
No Model
390
V8
61-76
C2AE-B
FORD
6.4
No Model
390
V8
68-76
C2AE-D
FORD
6.4
No Model
390
V8
61-76
C2AE-D
FORD
6.4
No Model
390
V8
68-76
C2AE-D
FORD
6.7
No Model
406
V8
62-63
C2DE-A
FORD
2.8
FALCON
170
L6
61-72
C2OE
FORD
5.4
No Model
LD
330
V8
62-65
C2OE
FORD
6.4
No Model
390
V8
68-76
C2OE-A
FORD
4.7
FALCON
289
V8
64-68
C2OZ
FORD
3.6
MERCURY COMET
221
V8
62-63
C2OZ
FORD
4.3
MERCURY METEOR
260
V8
63-64
C2OZ
FORD
4.7
FALCON
289
V8
64-68
C2OZ-B
FORD
3.6
MERCURY COMET
221
V8
62-63
C2OZ-B
FORD
4.3
MERCURY METEOR
260
V8
63-64
C2OZ-B
FORD
4.7
FALCON
289
V8
64-68
C2TE-6303A
FORD
7.8
No Model
475
V8
73-79
C2TE-6303A
FORD
7.8
No Model
477
V8
78-81
C2TE-6303C
FORD
5.4
No Model
332
V8
58-59
C2TE-6303-C
FORD
5.0
No Model
302
V8
56-65
C2TE-A
FORD
7.8
No Model
475
V8
73-79
C2TE-A
FORD
7.8
No Model
477
V8
78-81
618
VIN
GAS
HD
GAS
K
GAS
F
GAS
CID Cyl
Year

Casting
Manufacturer
Liter
Model
C2TE-B
FORD
6.6
No Model
C2TE-B
FORD
8.8
No Model
C2VE
FORD
6.7
No Model
C2VE
FORD
7.0
C2VE-A
FORD
C3AE
CID Cyl
Year
401
V8
58-76
534
V8
58-81
58
410
V8
58-58
EDSEL
430
V8
58-65
6.7
No Model
58
410
V8
58-58
FORD
5.4
No Model
LD
330
V8
62-65
C3AE
FORD
5.8
No Model
352
V8
58-67
C3AE
FORD
6.4
No Model
390
V8
61-76
C3AE
FORD
6.4
No Model
390
V8
68-76
C3AE-6303-E
FORD
6.4
No Model
390
V8
61-76
C3AE-6303-E
FORD
6.4
No Model
390
V8
68-76
C3AE-A
FORD
5.4
No Model
CAR
332
V8
58-59
C3AE-A
FORD
5.4
No Model
HD
330
V8
66-76
C3AE-A
FORD
5.9
No Model
360
V8
68-78
C3AE-B
FORD
6.4
No Model
390
V8
61-76
C3AE-B
FORD
6.4
No Model
390
V8
68-76
C3AE-B
FORD
6.7
No Model
406
V8
62-63
C3AE-C
FORD
6.4
No Model
390
V8
61-76
C3AE-C
FORD
6.4
No Model
390
V8
68-76
C3AE-C
FORD
6.7
No Model
406
V8
62-63
C3AE-D
FORD
6.4
No Model
390
V8
61-76
C3AE-D
FORD
6.4
No Model
390
V8
68-76
C3AE-E
FORD
6.4
No Model
390
V8
61-76
C3AE-E
FORD
6.4
No Model
390
V8
68-76
C3AE-E
FORD
6.7
No Model
406
V8
62-63
C3AE-F
FORD
3.6
MERCURY COMET
221
V8
62-63
C3AE-F
FORD
4.3
MERCURY METEOR
260
V8
63-64
C3AE-F
FORD
4.7
FALCON
289
V8
64-68
C3AE-G
FORD
7.0
FE
R, W
427
V8
63-68
C3AE-M
FORD
3.5
No Model
215
L6
52-53
C3AE-M
FORD
3.7
No Model
223
L6
54-64
C3AE-N
FORD
3.6
MERCURY COMET
221
V8
62-63
C3AE-N
FORD
4.3
MERCURY METEOR
260
V8
63-64
C3AE-N
FORD
4.7
FALCON
289
V8
64-68
C3AE-U
FORD
6.4
No Model
390
V8
61-76
C3AE-U
FORD
6.4
No Model
390
V8
68-76
C3AE-U
FORD
7.0
FE
R, W
427
V8
63-68
C3AF-N
FORD
3.6
MERCURY COMET
221
V8
62-63
C3AF-N
FORD
4.3
MERCURY METEOR
260
V8
63-64
C3AF-N
FORD
4.7
FALCON
289
V8
64-68
C3AZ
FORD
6.4
No Model
390
V8
61-76
C3AZ
FORD
6.4
No Model
390
V8
68-76
C3NN6303B
FORD
4.0
6000
242
L6
60-70
C3OE-A
FORD
3.3
No Model
200
L6
63-79
C3OE-B
FORD
3.6
MERCURY COMET
221
V8
62-63
C3OE-B
FORD
4.7
FALCON
289
V8
64-68
C3OZ
FORD
3.6
MERCURY COMET
221
V8
62-63
C3OZ
FORD
4.3
MERCURY METEOR
260
V8
63-64
C3OZ
FORD
4.7
FALCON
289
V8
64-68
C3OZ-A
FORD
3.3
No Model
200
L6
63-79
C3OZ-B
FORD
3.6
MERCURY COMET
221
V8
62-63
C3OZ-B
FORD
4.3
MERCURY METEOR
260
V8
63-64
C3OZ-B
FORD
4.7
FALCON
289
V8
64-68
C3OZ-E
FORD
3.3
No Model
200
L6
63-79
C3TE
FORD
4.3
No Model
262
L6
61-64
C3TE-6303B
FORD
5.4
No Model
332
V8
58-59
C3TE-6303-B
FORD
5.0
No Model
302
V8
56-65
C3TE-6303C
FORD
5.4
No Model
332
V8
58-59
C3TE-6303-C
FORD
5.0
No Model
302
V8
56-65
619
VIN
HD
F
F

Casting
Manufacturer
Liter
Model
CID Cyl
Year
C3TE-6303D
FORD
5.4
No Model
C3TE-6303-D
FORD
5.0
No Model
332
V8
58-59
302
V8
C3TE-C
FORD
4.3
No Model
56-65
262
L6
C3TE-C
FORD
5.4
61-64
No Model
LD
330
V8
C3TE-D
FORD
62-65
5.4
No Model
LD
330
V8
C3VE
62-65
FORD
6.7
No Model
58
410
V8
58-58
C3VE
FORD
7.0
EDSEL
430
V8
58-65
C3VE-A
FORD
6.7
No Model
58
410
V8
58-58
C4AE
FORD
5.8
No Model
352
V8
58-67
C4AE-3U
FORD
6.4
No Model
390
V8
61-76
C4AE-3U
FORD
6.4
No Model
390
V8
68-76
C4AE-A
FORD
5.4
No Model
HD
330
V8
66-76
C4AE-A
FORD
5.4
No Model
LD
330
V8
62-65
C4AE-A
FORD
5.9
No Model
360
V8
68-78
C4AE-AJ
FORD
7.0
FE
R, W
427
V8
63-68
C4AE-B
FORD
6.4
No Model
390
V8
61-76
C4AE-B
FORD
6.4
No Model
390
V8
68-76
C4AE-B
FORD
6.7
No Model
406
V8
62-63
C4AE-B
FORD
7.0
FE
R, W
427
V8
63-68
C4AE-C
FORD
6.4
No Model
390
V8
61-76
C4AE-C
FORD
6.4
No Model
390
V8
68-76
C4AE-D
FORD
6.4
No Model
390
V8
61-76
C4AE-D
FORD
6.4
No Model
390
V8
68-76
C4AE-E
FORD
6.4
No Model
390
V8
61-76
C4AE-E
FORD
6.4
No Model
390
V8
68-76
C4AE-E
FORD
6.7
No Model
406
V8
62-63
C4AE-H
FORD
7.0
FE
R, W
427
V8
63-68
C4AZ-A
FORD
6.4
No Model
390
V8
61-76
C4AZ-A
FORD
6.4
No Model
390
V8
68-76
C4AZ-J
FORD
6.4
No Model
390
V8
61-76
C4AZ-J
FORD
6.4
No Model
390
V8
68-76
C4TE-6303-A
FORD
5.4
No Model
LD
330
V8
62-65
C4TE-A
FORD
5.4
No Model
HD
330
V8
66-76
C4TE-A
FORD
5.4
No Model
LD
330
V8
62-65
C4TE-A
FORD
5.9
No Model
HD
361
V8
66-78
C4TE-B
FORD
6.4
No Model
HD
391
V8
64-79
C4TE-C
FORD
4.3
No Model
262
L6
61-64
C4TE-D
FORD
5.9
No Model
HD
361
V8
66-78
C4TZ-A
FORD
6.4
No Model
390
V8
61-76
C4TZ-A
FORD
6.4
No Model
390
V8
68-76
C4TZ-B
FORD
6.4
No Model
390
V8
61-76
C4TZ-B
FORD
6.4
No Model
390
V8
68-76
C5145
HERCULES
3.7
D2300
226
L4
C5145
HERCULES
3.7
D-2300
226
L4
C5145
HERCULES
3.8
No Model
232
L6
C5145
HERCULES
4.0
JXE
245
L6
C5145
HERCULES
4.6
JXC
282
L6
C5145
HERCULES
5.2
JXD
320
L6
C5145
HERCULES
5.2
No Model
320
L6
C5AE
FORD
5.8
No Model
352
V8
58-67
C5AE-A
FORD
5.4
No Model
HD
330
V8
66-76
C5AE-A
FORD
5.9
No Model
360
V8
68-78
C5AE-C
FORD
7.0
FE
R, W
427
V8
63-68
C5AE-C
FORD
7.0
SOHC427
SOHC
427
V8
64-67
C5DE-A
FORD
3.3
No Model
200
L6
63-79
C5JE-A
FORD
7.0
FE MARINE
427
V8
63-68
C5JE-B
FORD
7.0
FE MARINE
427
V8
63-68
C5NE6303K
FORD
4.2
5000
256
L4
72-78
C5NE6303K
FORD
4.2
5000
256
L4
68-72
620
VIN
JXA
JXD

Casting
Manufacturer
Liter
Model
CID Cyl
Year
C5NE-6303-K
FORD
4.2
5000
C5NE-6303-K
FORD
4.2
5000
256
L4
72-78
256
L4
C5NE-6303-L
FORD
2.9
2000
68-72
175
L3
C5NE-6303-L
FORD
2.9
65-68
3000
175
L3
C5NE6303N
FORD
61-75
3.3
535
201
L3
C5NE-6303-N
65-72
FORD
3.3
535
201
L3
65-72
C5NE-6303-N
FORD
3.3
555
201
L3
75-90
C5NE-6303-N
FORD
3.3
BSD-333
201
L3
65-72
C5NE-6303-R
FORD
2.9
2000
175
L3
65-68
C5NE-6303-R
FORD
2.9
3000
175
L3
61-75
C5NE-6305
FORD
2.9
2000
175
L3
65-68
C5NE-6305
FORD
2.9
3000
175
L3
61-75
C5NE-K
FORD
4.2
BSD-442
256
L4
C5NE-K
FORD
4.2
BSD-442
256
L4
C5NE-K
FORD
4.2
BSD-442T
256
L4
C5NE-K
FORD
4.2
BSD-442T
256
L4
C5TE
FORD
4.9
CSG-649
300
L6
65-93
C5TE
FORD
4.9
No Model
300
L6
76-85
C5TE
FORD
4.9
No Model
300
L6
82-84
C5TE
FORD
4.9
No Model
300
L6
73-79
C5TE
FORD
4.9
No Model
300
L6
78
C5TE
FORD
4.9
No Model
300
L6
78-79
C5TE
FORD
4.9
No Model
300
L6
83-84
C5TE-C
FORD
4.9
CSG-649
300
L6
65-93
C5TE-C
FORD
4.9
No Model
300
L6
76-85
C5TE-C
FORD
4.9
No Model
300
L6
82-84
C5TE-C
FORD
4.9
No Model
300
L6
73-79
C5TE-C
FORD
4.9
No Model
300
L6
78
C5TE-C
FORD
4.9
No Model
300
L6
78-79
C5TE-C
FORD
4.9
No Model
300
L6
83-84
C5TE-F
FORD
4.9
CSG-649
300
L6
65-93
C5TE-F
FORD
4.9
No Model
300
L6
76-85
C5TE-F
FORD
4.9
No Model
300
L6
82-84
C5TE-F
FORD
4.9
No Model
300
L6
73-79
C5TE-F
FORD
4.9
No Model
300
L6
78
C5TE-F
FORD
4.9
No Model
300
L6
78-79
C5TE-F
FORD
4.9
No Model
300
L6
83-84
C5TE-F
FORD
4.9
No Model
300
L6
85-86
C5TE-F
FORD
4.9
No Model
300
L6
87-96
C5TZ-A
FORD
4.9
CSG-649
300
L6
65-93
C5TZ-A
FORD
4.9
No Model
300
L6
76-85
C5TZ-A
FORD
4.9
No Model
300
L6
82-84
C5TZ-A
FORD
4.9
No Model
300
L6
73-79
C5TZ-A
FORD
4.9
No Model
300
L6
78
C5TZ-A
FORD
4.9
No Model
300
L6
78-79
C5TZ-A
FORD
4.9
No Model
300
L6
83-84
C5TZ-B
FORD
4.9
CSG-649
300
L6
65-93
C5TZ-B
FORD
4.9
No Model
300
L6
76-85
C5TZ-B
FORD
4.9
No Model
300
L6
82-84
C5TZ-B
FORD
4.9
No Model
300
L6
73-79
C5TZ-B
FORD
4.9
No Model
300
L6
78
C5TZ-B
FORD
4.9
No Model
300
L6
78-79
C5TZ-B
FORD
4.9
No Model
300
L6
83-84
C6AE-A
FORD
6.4
No Model
390
V8
61-76
C6AE-A
FORD
6.4
No Model
390
V8
68-76
C6AE-B
FORD
6.4
No Model
390
V8
61-76
C6AE-B
FORD
6.4
No Model
390
V8
68-76
C6AE-D
FORD
5.4
No Model
HD
330
V8
66-76
C6AE-D
FORD
6.4
No Model
390
V8
61-76
621
VIN

Casting
Manufacturer
Liter
Model
C6AE-D
FORD
6.4
No Model
C6JE-B
FORD
7.0
FE MARINE
C6JE-C
FORD
7.0
C6JE-D
FORD
C6TE-A
CID Cyl
Year
390
V8
68-76
427
V8
63-68
FE MARINE
427
V8
63-68
7.0
FE MARINE
427
V8
63-68
FORD
5.4
No Model
HD
330
V8
66-76
C6TE-C
FORD
6.4
No Model
HD
391
V8
64-79
C6TE-D
FORD
5.4
No Model
HD
330
V8
66-76
C6TE-D
FORD
5.9
No Model
HD
361
V8
66-78
C6TE-E
FORD
6.4
No Model
HD
391
V8
64-79
C6TE-G
FORD
4.9
CSG-649
300
L6
65-93
C6TE-G
FORD
4.9
No Model
300
L6
76-85
C6TE-G
FORD
4.9
No Model
300
L6
82-84
C6TE-G
FORD
4.9
No Model
300
L6
73-79
C6TE-G
FORD
4.9
No Model
300
L6
78
C6TE-G
FORD
4.9
No Model
300
L6
78-79
C6TE-G
FORD
4.9
No Model
300
L6
83-84
C6TE-G
FORD
4.9
No Model
300
L6
85-86
C6TE-G
FORD
4.9
No Model
300
L6
87-96
C6VE-6303-A
FORD
7.6
No Model
462
V8
66-68
C741
CROSLEY
0.7
No Model
44
L4
46-55
C7NN-6303
FORD
6.6
BSD-666
401
L6
68-82
C7NN-6303
FORD
6.6
BSD-666T
401
L6
68-94
C7NN-6303
FORD
6.6
BSD-666T(2)
401
L6
68-82
C7NN-6303-A
FORD
6.6
BSD-666T
401
L6
68-94
C7NN-6303-A
FORD
6.6
BSD-666T(2)
401
L6
68-82
C7TE
FORD
6.4
No Model
HD
391
V8
64-79
C7TE-A
FORD
5.4
No Model
HD
330
V8
66-76
C7TE-A
FORD
5.9
No Model
HD
361
V8
66-78
C7TE-B
FORD
6.4
No Model
HD
391
V8
64-79
C7TE-E
FORD
6.4
No Model
HD
391
V8
64-79
C7TE-EA
FORD
6.4
No Model
HD
391
V8
64-79
C8AE-A
FORD
5.9
No Model
360
V8
68-78
C8AE-A
FORD
7.0
FE
R, W
427
V8
63-68
C8AE-B
FORD
7.0
FE
R, W
427
V8
63-68
C8SE-A
FORD
7.0
No Model
429
V8
68-73
C8VE
FORD
7.5
No Model
460
V8
68-73
C8VE
FORD
7.5
No Model
460
V8
74-78
C8VE
FORD
7.5
No Model
460
V8
74-79
C8VE-A
FORD
7.5
No Model
460
V8
68-73
C90E-A
FORD
5.8
No Model
351
V8
79
C90E-A
FORD
5.8
No Model
351
V8
69-71
C90E-A
FORD
5.8
WSG-858
351
V8
C9AE-A
FORD
7.0
No Model
429
V8
68-73
C9AE-B
FORD
7.0
No Model
429
V8
68-73
C9DE-A
FORD
4.1
No Model
250
L6
69-80
C9DE-A
FORD
4.1
No Model
250
L6
79-81
C9OE-A
FORD
5.8
No Model
351
V8
69-78
C9OE-A
FORD
5.8
No Model
351
V8
68-74
C9TE
FORD
4.4
No Model
272
V8
56-66
C9TE-A
FORD
4.8
No Model
292
V8
55-66
C9ZE-6303-A
FORD
5.0
No Model
302
V8
69-71
C9ZE-C
FORD
6.7
No Model
58
410
V8
58-58
C9ZE-D
FORD
6.7
No Model
58
410
V8
58-58
CA55
WISCONSIN
1.5
No Model
92
V4
40-69
CA55
WISCONSIN
1.5
No Model
92
V4
40-69
CA55
WISCONSIN
1.5
No Model
92
V4
40-69
CA55
WISCONSIN
1.5
VE4
92
V4
CA55
WISCONSIN
1.5
VE4D
92
V4
40-69
CA55
WISCONSIN
1.5
VE4D
92
V4
40-69
622
VIN
M

Casting
Manufacturer
Liter
Model
CA55
WISCONSIN
1.8
No Model
CA55
WISCONSIN
1.8
No Model
CA55
WISCONSIN
1.8
CA55
WISCONSIN
CA55
WISCONSIN
CA55
CA55
CID Cyl
Year
108
V4
40-76
108
V4
56-56
VF4
108
V4
1.8
VF4D
108
V4
1.8
VH4
108
V4
WISCONSIN
1.8
VH4D
108
V4
WISCONSIN
1.8
VH4DM
108
V4
CA55
WISCONSIN
1.8
W4-1770
108
V4
CA-55
WISCONSIN
1.8
No Model
108
V4
40-76
CA-55
WISCONSIN
1.8
No Model
108
V4
56-56
CA-55
WISCONSIN
1.8
VF4
108
V4
CA-55
WISCONSIN
1.8
VF4D
108
V4
CA-55
WISCONSIN
1.8
VH4
108
V4
CA-55
WISCONSIN
1.8
VH4D
108
V4
CA-55
WISCONSIN
1.8
VH4DM
108
V4
CA-55
WISCONSIN
1.8
W4-1770
108
V4
CA-68
MILITARY STD
1.8
No Model
108
L4
CA-69D
WISCONSIN
2.5
No Model
154
V4
CA-69-D
MILITARY STD
2.4
No Model
145
L4
CA-70
MILITARY STD
0.9
No Model
54
L2
CA-70
WISCONSIN
0.9
No Model
54
L2
CA-70
WISCONSIN
0.9
TH
54
L2
CA-70
WISCONSIN
0.9
THD
54
L2
CA-70
WISCONSIN
0.9
THDM
54
L2
CA71A
WISCONSIN
1.8
No Model
108
V4
40-76
CA71A
WISCONSIN
1.8
No Model
108
V4
56-56
CA71A
WISCONSIN
1.8
VF4
108
V4
CA71A
WISCONSIN
1.8
VF4D
108
V4
CA71A
WISCONSIN
1.8
VH4
108
V4
CA71A
WISCONSIN
1.8
VH4D
108
V4
CA71A
WISCONSIN
1.8
VH4DM
108
V4
CA71A
WISCONSIN
1.8
W4-1770
108
V4
CA-71-C
MILITARY STD
1.8
No Model
108
L4
CA-75
WISCONSIN
2.5
No Model
177
V4
CA86
WISCONSIN
0.9
No Model
54
L2
CA86
WISCONSIN
0.9
TF
54
L2
46-57
CA-86
WISCONSIN
0.9
No Model
54
L2
57-76
CA-86
WISCONSIN
0.9
No Model
54
L2
68-68
CA-86
WISCONSIN
0.9
TH
54
L2
CA-86
WISCONSIN
0.9
THD
54
L2
CA-86
WISCONSIN
0.9
THDM
54
L2
CE-401-A
MINN MOLINE
7.0
GB
425
L6
54-61
C-LK
TOYOTA
1.9
CROWN
113
L4
66-69
CSAE-A
FORD
5.4
No Model
LD
330
V8
62-65
CTR-CB
FORD
2.4
FALCON
144
L6
60-64
CTR-CB
FORD
2.8
FALCON
170
L6
61-72
FORD
2.3
LSG423
140
L4
FORD
2.3
No Model
140
L4
81-82
FORD
2.3
No Model
140
L4
80-84
FORD
2.3
No Model
140
L4
76-80
FORD
2.3
No Model
140
L4
80-87
FORD
2.3
No Model
140
L4
79-80
FORD
2.3
No Model
140
L4
74-75
FORD
2.3
No Model
140
L4
76-79
FORD
2.3
No Model
140
L4
83-85
D.8308010
RENAULT
0.6
No Model
37
L4
45-58
D.8308010
RENAULT
0.7
No Model
46
L4
59-69
D.8308010
RENAULT
0.8
No Model
52
L4
45-71
D0242
NISSAN
1.8
No Model
CA18E
110
L4
84-86
623
VIN
VH
VH
461
VH
465
40-76
56-56
40-76
56-56
60-70
57-76
57-76
40-76
56-56
57-76

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
D0242
NISSAN
1.8
No Model
CA18E
D0TE-A
FORD
5.4
No Model
HD
110
L4
87-88
330
V8
D0TE-A
FORD
5.9
No Model
66-76
HD
361
V8
D0ZE-6303-A
FORD
5.0
66-78
No Model
302
V8
D1742
NISSAN
69-71
2.0
200SX
120
L4
D-179935
84-86
CASE
3.6
995
219
L4
D186-300
CONTINENTAL
3.6
F218
218
L6
D186-300
CONTINENTAL
3.6
F218
218
L6
D186C300
MACK
3.4
No Model
209
L6
D1NL
FORD
2.8
No Model
172
L4
53-80
D1NL
FORD
3.1
No Model
192
L4
64-79
D1TE-A
FORD
5.9
No Model
HD
361
V8
66-78
D1TE-B
FORD
6.4
No Model
HD
391
V8
64-79
D2TE-A
FORD
5.4
No Model
HD
330
V8
66-76
D2TE-AA
FORD
5.4
No Model
HD
330
V8
66-76
D2TE-AA
FORD
5.9
No Model
HD
361
V8
66-78
D2TE-EA
FORD
6.4
No Model
HD
391
V8
64-79
D3891
CASE
3.0
990
185
L4
D3TE-AA
FORD
6.4
No Model
391
V8
D600C218
MACK
3.4
No Model
209
L6
D600C-218
CONTINENTAL
3.3
202
202
L6
D600C-218
CONTINENTAL
3.3
DS202
202
L6
D600C-218
CONTINENTAL
3.4
F209
209
L6
D600C-218
CONTINENTAL
3.6
F218
218
L6
D600C-218
CONTINENTAL
3.6
F218
218
L6
D600C368
MACK
3.4
No Model
209
L6
D600C-368
CONTINENTAL
3.3
202
202
L6
D600C-368
CONTINENTAL
3.3
DS202
202
L6
D600C-368
CONTINENTAL
3.4
F209
209
L6
D600C-368
CONTINENTAL
3.6
F218
218
L6
D600C-368
CONTINENTAL
3.6
F218
218
L6
D600C601
MACK
3.4
No Model
209
L6
D600C-601
CONTINENTAL
3.3
202
202
L6
D600C-601
CONTINENTAL
3.3
DS202
202
L6
D600C-601
CONTINENTAL
3.4
F209
209
L6
D600C-601
CONTINENTAL
3.6
F218
218
L6
D600C-601
CONTINENTAL
3.6
F218
218
L6
D600C-601
OLIVER
3.4
No Model
209
L6
35-51
D600C-602
OLIVER
3.4
No Model
209
L6
35-51
D600C603
MACK
3.4
No Model
209
L6
D600C-603
CONTINENTAL
3.3
202
202
L6
D600C-603
CONTINENTAL
3.3
DS202
202
L6
D600C-603
CONTINENTAL
3.4
F209
209
L6
D600C-603
CONTINENTAL
3.6
F218
218
L6
D600C-603
CONTINENTAL
3.6
F218
218
L6
D600C-603
OLIVER
3.4
No Model
209
L6
35-51
D7AE
FORD
5.8
No Model
G,Q
351
V8
75-82
D-905196
CASE
3.6
995
219
L4
D908453
CASE
3.0
990
185
L4
D928
CASE
3.6
1490
D(1)
219
L4
D928415
CASE
3.6
1490
D(1)
219
L4
D928416
CASE
3.6
1490
D(1)
219
L4
D9NN-6110-AA
FORD
4.4
BSD-444
268
L4
D9NN-6110-AA
FORD
4.4
BSD-444T
268
L4
D9NN-6303-A
FORD
4.4
BSD-444
268
L4
D9NN-6303-A
FORD
4.4
BSD-444T
268
L4
D9NN-6303-AA
FORD
4.4
BSD-444
268
L4
D9NN-6303-AA
FORD
4.4
BSD-444T
268
L4
D9TE-AA
FORD
7.0
No Model
429
V8
HD
DS
DS
DS
DS
624
64-79
89-96

Casting
Manufacturer
Liter
Model
CID Cyl
Year
D9TE-AA
FORD
7.0
No Model
D9TE-AA
FORD
7.0
No Model
429
V8
91-95
429
V8
D9TE-B
FORD
7.0
No Model
79-90
429
V8
D9TE-BA
FORD
7.0
79-90
No Model
429
V8
D9TE-BA
FORD
89-96
7.0
No Model
429
V8
D9TE-BA
91-95
FORD
7.0
No Model
429
V8
79-90
D9TE-EA
FORD
7.0
No Model
429
V8
89-96
D9TE-EA
FORD
7.0
No Model
429
V8
91-95
DAA50ZZ8
CHRYSLER
1.7
No Model
105
L4
66-70
DCI
MAZDA
1.6
No Model
97
L4
70-81
DD
OPEL
1.1
No Model
66
L4
65-73
DE34286
BUDA
10.6
No Model
648
L4
DE34286
BUDA
13.8
No Model
844
L6
DE34286
BUDA
18.4
No Model
1125
V8
DE34286
BUDA
21.1
No Model
1290
V8
DE40263
BUDA
7.7
No Model
470
L6
DE40263
BUDA
8.6
No Model
525
L6
DE41302
BUDA
7.7
No Model
470
L6
DE41302
BUDA
8.6
No Model
525
L6
DE41342
BUDA
7.7
No Model
470
L6
DE41342
BUDA
8.6
No Model
525
L6
DE41382
BUDA
7.7
No Model
470
L6
DE41382
BUDA
8.6
No Model
525
L6
DE41642
BUDA
7.7
No Model
470
L6
DE41642
BUDA
8.6
No Model
525
L6
DE43102
BUDA
7.7
No Model
470
L6
DE43102
BUDA
8.6
No Model
525
L6
DE4958
BUDA
7.7
No Model
470
L6
DE4958
BUDA
8.6
No Model
525
L6
DE50861
BUDA
4.6
No Model
279
L6
DE51185
BUDA
4.8
No Model
294
L6
DE51185
BUDA
5.3
No Model
325
L6
DE51186
BUDA
5.2
No Model
317
L6
DE51256
BUDA
5.2
No Model
317
L6
DE61324
ALLIS CHALMERS
15.9
No Model
971
L6
DE61324
BUDA
10.6
No Model
648
L4
DE61324
BUDA
13.8
No Model
844
L6
DE61324
BUDA
15.9
No Model
971
L6
DE61324
BUDA
18.4
No Model
1125
V8
DE61324
BUDA
21.1
No Model
1290
V8
DE63043
BUDA
10.6
No Model
648
L4
DE63043
BUDA
13.8
No Model
844
L6
DE63043
BUDA
18.4
No Model
1125
V8
DE63043
BUDA
21.1
No Model
1290
V8
DE63908
BUDA
10.6
No Model
648
L4
DE63908
BUDA
13.8
No Model
844
L6
DE63908
BUDA
15.9
No Model
971
L6
DE63908
BUDA
18.4
No Model
1125
V8
DE63908
BUDA
21.1
No Model
1290
V8
DE64786
BUDA
10.6
No Model
648
L4
DE64786
BUDA
13.8
No Model
844
L6
DE64786
BUDA
18.4
No Model
1125
V8
DE64786
BUDA
21.1
No Model
1290
V8
DE65958
BUDA
15.9
No Model
971
L6
DE65968
BUDA
10.6
No Model
648
L4
DE65968
BUDA
13.8
No Model
844
L6
DE65968
BUDA
21.1
No Model
1290
V8
DE65970
BUDA
10.6
No Model
648
L4
DE65970
BUDA
18.4
No Model
1125
V8
625
VIN

Casting
Manufacturer
Liter
Model
DE65970
BUDA
21.1
No Model
1290
V8
DE65971
BUDA
10.6
No Model
648
L4
DE65971
BUDA
18.4
No Model
1125
V8
DE65971
BUDA
21.1
No Model
1290
V8
DE65986
BUDA
18.4
No Model
1125
V8
DE66233
BUDA
13.8
No Model
844
L6
DE66233
BUDA
15.9
No Model
971
L6
DK
CHRYSLER
3.5
No Model
215
V6
93-97
DK
OPEL
1.9
No Model
116
L4
67-75
DOAE-A
FORD
5.8
No Model
351
V8
70-74
DOHC
MAZDA
1.6
MIATA
BP
98
L4
90-92
DOHC
MAZDA
1.8
MIATA
BP
112
L4
90-96
DOHC
MAZDA
1.8
PROTG
112
L4
93-94
DOHC
MAZDA
1.8
PROTG
BP
112
L4
90-92
DOTE-A
FORD
5.9
No Model
HD
361
V8
66-78
DX-A3
REO
6.4
No Model
391
V8
DX-A3
REO
7.2
No Model
443
V8
GM
1.8
LUV
110
L4
76-86
GM
1.8
LUV
110
L4
72-75
E SD22
NISSAN
2.2
SD22
SD22
132
L4
81-83
E1
CHRYSLER
3.0
STEALTH
181
V6
93-95
E1
MITSUBISHI
3.0
3000GT
181
V6
91-94
E1
MITSUBISHI
3.0
3000GT
181
V6
91-92
E1
MITSUBISHI
3.0
3000GT
181
V6
93-98
E1ADDNN-6303-D
FORD
3.6
No Model
220
L4
58-67
E1ADDNN-6303-E
FORD
3.6
No Model
220
L4
58-67
E1AE
FORD
5.0
No Model
302
V8
95-97
E1AE
FORD
5.0
No Model
302
V8
87-93
E1AE
FORD
5.0
No Model
302
V8
83-87
E1AE
FORD
5.0
No Model
302
V8
84-87
E1AE
FORD
5.0
No Model
302
V8
88-93
E1AE
FORD
5.0
No Model
302
V8
84-87
E1AE
FORD
5.0
No Model
302
V8
85-97
E1AE
FORD
5.0
No Model
302
V8
91-95
E1AE-AA
FORD
5.0
No Model
302
V8
87-93
E1AE-AA
FORD
5.0
No Model
302
V8
83-87
E1AE-AA
FORD
5.0
No Model
302
V8
84-87
E1AE-AA
FORD
5.0
No Model
302
V8
88-93
E1AE-AA
FORD
5.0
No Model
302
V8
84-87
E1AE-AA
FORD
5.0
No Model
302
V8
86-86
E1AE-AA
FORD
5.0
No Model
302
V8
85-97
E1AE-AA
FORD
5.0
No Model
302
V8
91-95
E1BE-BB
FORD
3.3
No Model
200
L6
80-82
E1BE-CC
FORD
3.3
No Model
200
L6
80-82
E1BE-CC
FORD
3.3
No Model
200
L6
83
E1EE
FORD
1.6
ESCORT
98
L4
81-82
E1EE
FORD
1.6
ESCORT
98
L4
83-85
E1EE
FORD
1.6
ESCORT
98
L4
83-85
E1EE
FORD
1.6
ESCORT
98
L4
83-85
E1EE
FORD
1.6
ESCORT
98
L4
83-85
E1EE
FORD
1.6
ESCORT,TURBO
98
L4
83-85
E1EE-AB
FORD
1.6
ESCORT
98
L4
81-82
E1EE-AB
FORD
1.6
ESCORT
98
L4
83-85
E223C-300
CONTINENTAL
3.3
DS202
202
L6
E223C-300
CONTINENTAL
3.4
ED208
208
L4
E223C-300
CONTINENTAL
3.7
E223
223
L4
E22E-BA
FORD
2.0
RANGER
122
L4
83-88
E22E-BA
FORD
2.0
RANGER
122
L4
84-85
E242C-300
CONTINENTAL
4.0
E242
242
L4
626
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
E242C-300
CONTINENTAL
4.0
E243
243
L4
E242C-300
CONTINENTAL
4.0
HD243
243
L4
E242C-300
MASSEY FERGUSON
4.0
MF85
242
L4
E242C-600
CONTINENTAL
4.0
E242
242
L4
E242C-600
CONTINENTAL
4.0
E243
243
L4
E242C-600
CONTINENTAL
4.0
HD243
243
L4
E242C-600
MASSEY FERGUSON
4.0
MF85
242
L4
E2AE
FORD
3.8
No Model
232
V6
82-87
E2AE
FORD
3.8
No Model
232
V6
84-85
E2AE-AF
FORD
3.8
No Model
232
V6
82-87
E2AE-AF
FORD
3.8
No Model
232
V6
88-95
E2AE-AF
FORD
3.8
No Model
232
V6
84-85
E2AE-DB
FORD
3.8
No Model
232
V6
82-87
E2AE-DB
FORD
3.8
No Model
232
V6
84-85
E2ZE-BA
FORD
2.0
RANGER
122
L4
83-88
E2ZE-BA
FORD
2.0
RANGER
122
L4
84-85
E2ZE-BA
FORD
2.3
LSG423
140
L4
E2ZE-BA
FORD
2.3
No Model
140
L4
81-82
E2ZE-BA
FORD
2.3
No Model
140
L4
80-84
E2ZE-BA
FORD
2.3
No Model
140
L4
85-88
E2ZE-BA
FORD
2.3
No Model
140
L4
89-98
E2ZE-BA
FORD
2.3
No Model
140
L4
91-93
E2ZE-BA
FORD
2.3
No Model
140
L4
80-87
E2ZE-BA
FORD
2.3
No Model
140
L4
83-88
E2ZE-BA
FORD
2.3
No Model
140
L4
83-85
E3140
NISSAN
2.4
No Model
L24E
146
L6
77-80
E3141
NISSAN
2.4
240Z
L24
146
L6
70-73
E3141
NISSAN
2.4
No Model
L24E
146
L6
77-80
E3142
NISSAN
2.4
240Z
L24
146
L6
70-73
E3142
NISSAN
2.4
No Model
L24E
146
L6
77-80
E373
LEROI
2.3
No Model
140
L4
E3AE
FORD
3.8
No Model
232
V6
82-87
E3AE
FORD
3.8
No Model
232
V6
88-95
E3AE
FORD
3.8
No Model
232
V6
84-85
E3AE-AA
FORD
3.8
No Model
232
V6
82-87
E3AE-AA
FORD
3.8
No Model
232
V6
88-95
E3AE-AA
FORD
3.8
No Model
232
V6
84-85
E3EE
FORD
1.6
ESCORT
98
L4
81-82
E3EE
FORD
1.6
ESCORT
98
L4
83-85
E3EE
FORD
1.6
ESCORT
98
L4
83-85
E3EE
FORD
1.6
ESCORT
98
L4
83-85
E3EE
FORD
1.6
ESCORT
98
L4
83-85
E3EE
FORD
1.6
ESCORT,TURBO
98
L4
83-85
E3EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E3EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E3EE-AA
FORD
1.6
ESCORT,TURBO
98
L4
83-85
E3HN-6303-AA
FORD
6.6
BSD-666T
401
L6
68-94
E3HN-6303-AA
FORD
6.6
BSD-666T(2)
401
L6
68-82
E3HN-6303-AA
FORD
6.6
TRUCK
401
L6
86-98
E3HN-6303-AB
FORD
6.6
TRUCK
401
L6
86-98
E-4
KUBOTA
2.8
L4150
168
L5
E400C-600
CONTINENTAL
3.3
DS202
202
L6
E400C-600
CONTINENTAL
3.4
ED208
208
L4
E400C-600
CONTINENTAL
3.7
E223
223
L4
E43E-AC
FORD
2.0
RANGER
122
L4
83-88
E43E-AC
FORD
2.0
RANGER
122
L4
84-85
E43E-AC
FORD
2.3
No Model
140
L4
83-86
E43E-AC
FORD
2.3
No Model
140
L4
85-86
E43E-AC
FORD
2.3
No Model
140
L4
85-86
627
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
CID Cyl
Year
E43E-AC
FORD
2.3
No Model
E43E-AC
FORD
2.3
TEMPO
141
L4
87-94
140
L4
E4AE-BA
FORD
5.8
F150
85-91
351
V8
E4AE-BA
FORD
5.8
93-96
No Model
351
V8
E4EEAA
FORD
84-97
1.6
ESCORT
98
L4
E4EEAA
81-82
FORD
1.6
ESCORT
98
L4
83-85
E4EEAA
FORD
1.6
ESCORT
98
L4
83-85
E4EEAA
FORD
1.6
ESCORT
98
L4
83-85
E4EEAA
FORD
1.6
ESCORT
98
L4
83-85
E4EEAA
FORD
1.6
ESCORT
98
L4
83-85
E4EEAA
FORD
1.6
ESCORT,TURBO
98
L4
83-85
E4EE-AA
FORD
1.6
ESCORT
98
L4
81-82
E4EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E4EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E4EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E4EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E4EE-AA
FORD
1.6
ESCORT,TURBO
98
L4
83-85
E4EE-AA
FORD
1.9
No Model
116
L4
86-96
E4ZE-AC
FORD
2.0
RANGER
122
L4
84-85
E501
MAZDA
1.5
D5FE
D5
90
L4
84-86
E5734JN
CUMMINS
6.6
J SERIES
401
L6
E5734JN
CUMMINS
6.6
J160
401
L6
E5734JN
CUMMINS
7.6
C 180
464
L6
E5EE-AA
FORD
1.9
ESCORT
116
L4
86-90
E5EE-BA
FORD
1.9
No Model
116
L4
86-96
E5HN-6303-AC
FORD
7.8
No Model
474
L6
86-95
E5HN-6303-AD
FORD
7.8
No Model
474
L6
86-95
E5HN-6303-CC
FORD
7.8
No Model
474
L6
86-95
E5NN-6303-CA
FORD
4.4
BSD-444
268
L4
E5NN-6303-FA
FORD
4.4
BSD-444
268
L4
E5NN-6303-FA
FORD
4.4
BSD-444T
268
L4
E5NN-6306-N
FORD
3.3
BSD-333
201
L3
65-72
E63E-AA
FORD
2.5
TAURUS
153
L4
86-91
E63E-AB
FORD
2.5
TAURUS
153
L4
86-91
E63E-AC
FORD
2.3
No Model
141
L4
87-94
E65EBB39D
FORD
4.6
No Model
281
V8
96-01
E65EBB39D
FORD
4.6
No Model
W, X
281
V8
91-05
E6AE-A
FORD
3.0
AEROSTAR
183
V6
90-99
E6AE-A
FORD
3.0
No Model
183
V6
86-90
E6AE-A
FORD
3.0
TAURUS
182
V6
96-04
E6AE-A
FORD
3.0
TAURUS
183
V6
00-03
E6AE-A
MAZDA
3.0
TRIBUTE
182
V6
-03
E6AE-AH
FORD
3.0
AEROSTAR
183
V6
90-99
E6AE-AH
FORD
3.0
No Model
183
V6
86-90
E6AE-AH
FORD
3.0
TAURUS
182
V6
96-04
E6AE-AH
FORD
3.0
TAURUS
183
V6
00-03
E6AE-AH
MAZDA
3.0
TRIBUTE
182
V6
-03
E6AE-B
FORD
3.0
AEROSTAR
183
V6
90-99
E6AE-B
FORD
3.0
No Model
183
V6
86-90
E6AE-B
FORD
3.0
TAURUS
182
V6
96-04
E6AE-B
FORD
3.0
TAURUS
183
V6
00-03
E6AE-B
MAZDA
3.0
TRIBUTE
182
V6
-03
E6AE-C
FORD
3.0
AEROSTAR
183
V6
90-99
E6AE-C
FORD
3.0
No Model
183
V6
86-90
E6AE-C
FORD
3.0
TAURUS
182
V6
96-04
E6AE-C
FORD
3.0
TAURUS
183
V6
00-03
E6AE-C
MAZDA
3.0
TRIBUTE
182
V6
-03
E6AE-W
FORD
3.0
AEROSTAR
183
V6
90-99
E6AE-W
FORD
3.0
No Model
183
V6
86-90
628
VIN

Casting
Manufacturer
Liter
Model
CID Cyl
Year
E6AE-W
FORD
3.0
TAURUS
E6AE-W
FORD
3.0
TAURUS
182
V6
96-04
183
V6
E6AE-W
MAZDA
3.0
TRIBUTE
00-03
182
V6
E6EE
FORD
3.8
-03
No Model
232
V6
88-95
E6EE-AA
FORD
E6EE-AA
FORD
1.6
ESCORT
98
L4
81-82
1.6
ESCORT
98
L4
E6EE-AA
83-85
FORD
1.6
ESCORT
98
L4
83-85
E6EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E6EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E6EE-AA
FORD
1.6
ESCORT
98
L4
83-85
E6EE-AA
FORD
1.6
ESCORT,TURBO
98
L4
83-85
E6HN-6303-CB
FORD
6.6
TRUCK
401
L6
86-98
E6HN-6303-CC
FORD
6.6
TRUCK
401
L6
86-98
E7AE
FORD
5.0
EXPLORER
302
V8
97-00
E7AE
FORD
5.0
No Model
302
V8
95-97
E7AE
FORD
5.0
No Model
302
V8
87-93
E7AE
FORD
5.0
No Model
302
V8
83-87
E7AE
FORD
5.0
No Model
302
V8
84-87
E7AE
FORD
5.0
No Model
302
V8
88-93
E7AE
FORD
5.0
No Model
302
V8
84-87
E7AE
FORD
5.0
No Model
302
V8
85-97
E7AE
FORD
5.0
No Model
302
V8
91-95
E7AE-AA
FORD
5.0
No Model
302
V8
87-93
E7AE-AA
FORD
5.0
No Model
302
V8
84-87
E7AE-AA
FORD
5.0
No Model
302
V8
88-93
E7AE-AA
FORD
5.0
No Model
302
V8
85-97
E7BB
FORD
1.9
ESCORT
116
L4
86-90
E7BB
FORD
1.9
No Model
116
L4
86-96
E7EE-BB
FORD
1.9
ESCORT
116
L4
87-96
E7EE-BB
FORD
1.9
ESCORT
116
L4
86-90
E7EE-BB
FORD
1.9
No Model
116
L4
86-96
E7EE-BB
FORD
1.9
No Model
116
L4
86-96
E7EE-CK
FORD
1.9
ESCORT
116
L4
86-90
E7EE-EK
FORD
1.9
ESCORT
116
L4
87-96
E7EE-EK
FORD
1.9
ESCORT
116
L4
86-90
E7EE-EK
FORD
1.9
No Model
116
L4
86-96
E7TE
FORD
5.0
EXPLORER
302
V8
97-00
E88EAB
FORD
2.3
No Model
140
L4
89-98
E88E-AB
FORD
2.3
No Model
140
L4
89-98
E89EAB
FORD
2.3
No Model
140
L4
89-98
E89EAB
FORD
2.3
No Model
140
L4
91-93
E89E-AB
FORD
2.3
No Model
140
L4
89-98
E89E-AB
FORD
2.3
No Model
140
L4
91-93
E89E-AB
MAZDA
2.3
B2300
140
L4
94-97
E8EEAB
FORD
2.3
No Model
140
L4
89-98
E90E-BB
FORD
3.8
No Model
232
V6
88-95
E9DE
FORD
3.8
No Model
232
V6
88-95
E9DE-BA
FORD
3.8
No Model
232
V6
88-95
E9DE-BA
FORD
3.8
No Model
232
V6
89-95
E9DE-BB
FORD
3.8
No Model
232
V6
88-95
E9DE-BB
FORD
3.8
No Model
232
V6
89-95
E9SE-BA
FORD
3.8
No Model
232
V6
88-95
E9SE-CB
FORD
3.8
No Model
232
V6
89-95
EAA
FORD
3.5
No Model
215
L6
52-53
EAA
FORD
3.7
No Model
223
L6
54-64
EAA-6303B
FORD
3.5
No Model
215
L6
52-53
EAB
FORD
3.9
No Model
239
V8
46-53
EAB
FORD
5.2
No Model
317
V8
52-55
EAB
FORD
5.6
No Model
341
V8
55
629
VIN

Casting
Manufacturer
Liter
Model
EAB-6303
FORD
5.2
No Model
EAB-6303
FORD
5.6
No Model
EAD
FORD
4.6
EAD
FORD
EAD
FORD
EAD-6303-C
CID Cyl
Year
317
V8
52-55
341
V8
55
No Model
279
V8
52-55
5.2
No Model
317
V8
52-55
5.6
No Model
341
V8
55
FORD
5.2
No Model
317
V8
52-55
EAD-6303-C
FORD
5.6
No Model
341
V8
55
EAF
FORD
2.2
134
L4
54-60
EAF
FORD
2.4
501
IND
144
L4
61-67
EAF
FORD
2.4
No Model
GAS
144
L4
61-67
EAF
FORD
2.8
No Model
172
L4
53-80
EAM
FORD
5.2
No Model
317
V8
52-55
EAM
FORD
5.6
No Model
341
V8
55
EB7JL
TOYOTA
3.9
LANDCRUISER
237
L6
65-74
EBF
FORD
3.5
No Model
215
L6
52-53
EBF
FORD
3.7
No Model
223
L6
54-64
EBJ
FORD
5.2
No Model
317
V8
52-55
EBJ
FORD
5.6
No Model
341
V8
55
EBP
FORD
3.5
No Model
215
L6
52-53
EBP
FORD
3.7
No Model
223
L6
54-64
EBU
FORD
3.9
No Model
OHV
239
V8
54
EBU
FORD
4.2
No Model
V8
256
V8
44-55
EBU
FORD
5.0
No Model
302
V8
56-65
EBU
FORD
6.0
No Model
368
V8
56-57
EBU-6303-A
FORD
3.9
No Model
OHV
239
V8
54
EBU-6303-A
FORD
4.2
No Model
V8
256
V8
44-55
EBU-6303-B
FORD
5.0
No Model
302
V8
56-65
EBU-6303-B
FORD
5.4
No Model
332
V8
58-59
EC
FORD
4.4
No Model
272
V8
56-66
EC
FORD
4.8
No Model
292
V8
55-66
ECE
FORD
5.1
FAIRLANE
312
V8
56-60
ECG
FORD
4.4
No Model
272
V8
56-66
ECG
FORD
4.8
No Model
292
V8
55-66
ECG
FORD
5.1
FAIRLANE
312
V8
56-60
ECG-6303-B
FORD
4.8
No Model
292
V8
55-66
ECK
FORD
4.4
No Model
272
V8
56-66
ECK
FORD
4.8
No Model
292
V8
55-66
ECK
FORD
5.1
FAIRLANE
312
V8
56-60
ECK-6303-B
FORD
4.8
No Model
292
V8
55-66
ECS
FORD
5.0
No Model
302
V8
56-65
ECS
FORD
5.4
No Model
332
V8
58-59
ECS-M-28
MG
1.1
No Model
70
L4
40-56
ECS-M-28
MG
1.3
MK III MIDGET
78
L4
66-74
ECS-M-28
MG
1.3
No Model
76
L4
40-54
ECT
FORD
5.2
No Model
317
V8
52-55
ECT
FORD
5.4
No Model
332
V8
58-59
ECT
FORD
5.6
No Model
341
V8
55
ECT
FORD
6.0
No Model
368
V8
56-57
ECT-6303-C
FORD
5.0
No Model
302
V8
56-65
ECT-6303-C
FORD
5.4
No Model
332
V8
58-59
ECU
FORD
5.0
No Model
302
V8
56-65
ECU
FORD
5.4
No Model
332
V8
58-59
ECU
FORD
6.0
No Model
368
V8
56-57
ECU-6303
FORD
5.4
No Model
332
V8
58-59
ECU-6303-B
FORD
5.4
No Model
332
V8
58-59
ECZ
FORD
5.1
FAIRLANE
312
V8
56-60
ED201C-202
CONTINENTAL
3.3
DS202
202
L6
ED201C-202
CONTINENTAL
3.4
ED208
208
L4
ED201C-202
CONTINENTAL
3.7
E223
223
L4
630
VIN
F
F

Casting
Manufacturer
Liter
Model
VIN
ED400C-200
CONTINENTAL
3.3
DS202
202
L6
ED400C-200
CONTINENTAL
3.4
ED208
208
L4
ED400C-200
CONTINENTAL
3.7
E223
223
L4
ED400C-201
CONTINENTAL
3.3
DS202
202
L6
ED400C-201
CONTINENTAL
3.4
ED208
208
L4
ED400C-201
CONTINENTAL
3.7
E223
223
L4
ED400C-202
CONTINENTAL
3.3
DS202
202
L6
ED400C-202
CONTINENTAL
3.4
ED208
208
L4
ED400C-202
CONTINENTAL
3.7
E223
223
L4
ED400C-600
CONTINENTAL
3.3
DS202
202
L6
ED400C-600
CONTINENTAL
3.4
ED208
208
L4
ED400C-600
CONTINENTAL
3.7
E223
223
L4
EDC
FORD
5.4
No Model
CAR
332
V8
58-59
EDD
FORD
5.4
No Model
HD
330
V8
66-76
EDD
FORD
5.4
No Model
LD
330
V8
62-65
EDD
FORD
5.8
No Model
352
V8
58-67
EDD
FORD
5.9
No Model
360
V8
68-78
EDF
FORD
6.3
No Model
383
V8
57-61
EDG
FORD
6.7
No Model
58
410
V8
58-58
EDG
FORD
7.0
EDSEL
430
V8
58-65
EDG-6303
FORD
6.7
No Model
58
410
V8
58-58
EDJ
FORD
6.7
No Model
58
410
V8
58-58
EDJ
FORD
7.0
EDSEL
430
V8
58-65
EDL
FORD
6.6
No Model
HD
401
V8
58-76
EDL
FORD
7.8
No Model
475
V8
73-79
EDL
FORD
7.8
No Model
477
V8
78-81
EDL-6303-A
FORD
7.8
No Model
475
V8
73-79
EDL-6303-A
FORD
7.8
No Model
477
V8
78-81
EDM
FORD
5.2
No Model
317
V8
52-55
EDM
FORD
5.6
No Model
341
V8
55
EDN
FORD
8.8
No Model
534
V8
58-81
EDN-6303-A
FORD
8.8
No Model
534
V8
58-81
EDS
FORD
6.7
No Model
410
V8
58-58
EE-351
MINN MOLINE
2.7
No Model
165
L4
EN24
MASSEY FERGUSON
2.3
23C
138
L4
EN438
FORD
2.9
2000
175
L3
65-68
EN438
FORD
2.9
3000
175
L3
61-75
EW
CHRYSLER
2.0
COLT
122
L4
90-94
EW
CHRYSLER
2.0
TALON
122
L4
90-92
F0011
TOYOTA
3.0
4-RUNNER
3V-ZE
180
V6
88-95
F0600C600
CHECKER
3.7
No Model
226
L6
47-64
F0SE-AA
FORD
3.8
No Model
232
V6
89-95
F1111
TOYOTA
3.0
4-RUNNER
3V-ZE
180
V6
88-95
F1115R
JOHN DEERE
6.2
70
379
L2
50-57
F1223R
JOHN DEERE
6.2
70
379
L2
50-57
F140C-303
CONTINENTAL
2.0
124
124
L4
F140C-303
CONTINENTAL
2.3
140
140
L4
F140C-303
CONTINENTAL
2.3
FS
FS
145
L4
F162C-319
CONTINENTAL
2.0
124
124
L4
F162C-319
CONTINENTAL
2.3
140
140
L4
F162C-319
CONTINENTAL
2.3
FS
FS
145
L4
F186C300
MACK
3.4
No Model
209
L6
F186C-300
CONTINENTAL
3.3
202
202
L6
F186C-300
CONTINENTAL
3.3
DS202
202
L6
F186C-300
CONTINENTAL
3.4
F209
209
L6
F186C-300
CONTINENTAL
3.6
F218
218
L6
F186C-300
CONTINENTAL
3.6
F218
218
L6
F1910R
JOHN DEERE
5.9
2940
359
L6
F1910R
JOHN DEERE
5.9
2940
359
L6
GAS
GAS
58
DS
631
CID Cyl
Year

Casting
Manufacturer
Liter
Model
F1910R
JOHN DEERE
5.9
359T
F1910R
JOHN DEERE
5.9
720
F1910R
JOHN DEERE
5.9
F1910R
JOHN DEERE
F1910R
VIN
CID Cyl
Year
359
L6
362
L2
No Model
359
L6
5.9
No Model
359
L6
JOHN DEERE
6.2
4010
381
L6
F1910R
JOHN DEERE
6.2
70
376
L2
55-55
F1AE
FORD
4.6
No Model
W, X
281
V8
91-05
F1AE-AD
FORD
4.6
No Model
W, X
281
V8
91-05
F1AE-AD
FORD
4.9
No Model
300
L6
76-85
F1AE-AD
FORD
4.9
No Model
300
L6
83-84
F1AE-AD
FORD
4.9
No Model
300
L6
85-86
F1AE-AD
FORD
4.9
No Model
300
L6
87-96
F1AE-AD-5D
FORD
4.6
No Model
281
V8
93-03
F1AE-AD-7D
FORD
4.6
No Model
281
V8
93-03
F1AE-AD-8D
FORD
4.6
No Model
281
V8
93-03
F1AE-AE
FORD
4.6
No Model
281
V8
93-03
F1AE-AE
FORD
4.6
No Model
W, X
281
V8
91-05
F1AZ
FORD
5.0
EXPLORER
302
V8
97-00
F1EA-AE
FORD
4.6
No Model
281
V8
96-01
F201
FORD
2.2
PROBE
133
L4
89-92
F201
FORD
2.2
PROBE
133
L4
89-92
F201
MAZDA
2.2
626
F2
133
L4
88-92
F201
MAZDA
2.2
B2200
F2
133
L4
87-93
F218C-318
CONTINENTAL
3.6
F218
218
L6
F218C-318
CONTINENTAL
3.6
F218
218
L6
F2729R
JOHN DEERE
5.9
2940
359
L6
F2729R
JOHN DEERE
5.9
2940
359
L6
F2729R
JOHN DEERE
5.9
359T
359
L6
F2729R
JOHN DEERE
5.9
720
361
L2
F2729R
JOHN DEERE
5.9
720
362
L2
F2729R
JOHN DEERE
5.9
No Model
359
L6
F2729R
JOHN DEERE
5.9
No Model
359
L6
F2729R
JOHN DEERE
6.2
4010
381
L6
F2792R
JOHN DEERE
5.9
2940
359
L6
F2792R
JOHN DEERE
5.9
2940
359
L6
F2792R
JOHN DEERE
5.9
359T
359
L6
F2792R
JOHN DEERE
5.9
720
362
L2
F2792R
JOHN DEERE
5.9
No Model
359
L6
F2792R
JOHN DEERE
5.9
No Model
359
L6
F2792R
JOHN DEERE
6.2
4010
381
L6
F3315R
JOHN DEERE
5.9
2940
359
L6
F3315R
JOHN DEERE
5.9
2940
359
L6
F3315R
JOHN DEERE
5.9
359T
359
L6
F3315R
JOHN DEERE
5.9
720
362
L2
F3315R
JOHN DEERE
5.9
No Model
359
L6
F3315R
JOHN DEERE
5.9
No Model
359
L6
F3315R
JOHN DEERE
6.2
4010
381
L6
F34R
JOHN DEERE
6.8
413
38-53
F34R
JOHN DEERE
6.8
R SERIES
416
L2
49-54
F3560R
JOHN DEERE
5.9
2940
359
L6
F3560R
JOHN DEERE
5.9
2940
359
L6
F3560R
JOHN DEERE
5.9
359T
359
L6
F3560R
JOHN DEERE
5.9
720
362
L2
F3560R
JOHN DEERE
5.9
No Model
359
L6
F3560R
JOHN DEERE
5.9
No Model
359
L6
F3560R
JOHN DEERE
6.2
4010
381
L6
F3560R
JOHN DEERE
6.2
70
376
L2
F3561R
JOHN DEERE
5.9
2940
359
L6
F3561R
JOHN DEERE
5.9
2940
359
L6
632
55-55

Casting
Manufacturer
Liter
Model
F3561R
JOHN DEERE
5.9
359T
F3561R
JOHN DEERE
5.9
720
F3561R
JOHN DEERE
5.9
F3561R
JOHN DEERE
F3561R
VIN
CID Cyl
Year
359
L6
362
L2
No Model
359
L6
5.9
No Model
359
L6
JOHN DEERE
6.2
4010
381
L6
F3561R
JOHN DEERE
6.2
70
376
L2
55-55
F3TE-BA
FORD
7.0
No Model
429
V8
91-95
F400C209
MACK
3.4
No Model
209
L6
F400C-209
CONTINENTAL
2.0
124
124
L4
F400C-209
CONTINENTAL
2.3
140
140
L4
F400C-209
CONTINENTAL
2.3
FS
FS
145
L4
F400C-209
CONTINENTAL
3.6
F218
218
L6
F400C-209
CONTINENTAL
3.6
F218
218
L6
F400C222
MACK
3.4
No Model
209
L6
F400C-222
CONTINENTAL
2.0
124
124
L4
F400C-222
CONTINENTAL
2.3
140
140
L4
F400C-222
CONTINENTAL
2.3
FS
FS
145
L4
F400C-222
CONTINENTAL
3.6
F218
218
L6
F400C-222
CONTINENTAL
3.6
F218
218
L6
F400C228
MACK
3.4
No Model
209
L6
F400C-228
CONTINENTAL
2.0
124
124
L4
F400C-228
CONTINENTAL
2.3
140
140
L4
F400C-228
CONTINENTAL
2.3
FS
FS
145
L4
F400C-228
CONTINENTAL
3.6
F218
218
L6
F400C-228
CONTINENTAL
3.6
F218
218
L6
F400C-314
CONTINENTAL
2.0
124
124
L4
F400C-314
CONTINENTAL
2.3
140
140
L4
F400C-314
CONTINENTAL
2.3
FS
FS
145
L4
F400C-3140
CONTINENTAL
2.3
140
140
L4
F400C-321
CONTINENTAL
2.0
124
124
L4
F400C-321
CONTINENTAL
2.3
140
140
L4
F400C-321
CONTINENTAL
2.3
FS
FS
145
L4
F400C-324
CONTINENTAL
2.0
124
124
L4
F400C-324
CONTINENTAL
2.3
140
140
L4
F400C-324
CONTINENTAL
2.3
FS
FS
145
L4
F400C-350
CONTINENTAL
2.7
163
F (4)
163
L4
F400C-358
CONTINENTAL
2.7
163
F (4)
163
L4
F400C-359
CONTINENTAL
2.3
FS
FS
145
L4
F400C-359
CONTINENTAL
2.3
FS
FS
145
L4
F400C-359
CONTINENTAL
2.7
163
F (4)
163
L4
F400C-359
CONTINENTAL
2.7
163
F (4)
163
L4
F-400C-359
MILITARY STD
2.4
No Model
145
L4
F-400C-359
MILITARY STD
2.7
No Model
162
L4
F400C-368
CONTINENTAL
2.0
124
124
L4
F400C-368
CONTINENTAL
2.3
140
140
L4
F400C-368
CONTINENTAL
2.3
FS
FS
145
L4
F400C-500
CONTINENTAL
2.0
124
124
L4
F400C-500
CONTINENTAL
2.3
140
140
L4
F400C-500
CONTINENTAL
2.3
FS
FS
145
L4
F400C-501
CONTINENTAL
2.0
124
124
L4
F400C-501
CONTINENTAL
2.3
140
140
L4
F400C-501
CONTINENTAL
2.3
FS
FS
145
L4
F400C-503
CONTINENTAL
2.3
FS
FS
145
L4
F400C-503
CONTINENTAL
2.3
FS
FS
145
L4
F400C-503
CONTINENTAL
2.7
163
F (4)
163
L4
F400C-503
CONTINENTAL
2.7
163
F (4)
163
L4
F-400C-503
MILITARY STD
2.4
No Model
145
L4
F-400C-503
MILITARY STD
2.7
No Model
162
L4
F-400C-509C
CONTINENTAL
2.7
162
162
L4
633

Casting
Manufacturer
Liter
Model
F400C-509S
CONTINENTAL
2.7
163
F (4)
163
L4
F400C-509T
CONTINENTAL
2.2
135
135
L4
F400C-509T
CONTINENTAL
2.7
163
F (4)
163
L4
F400C-510
CONTINENTAL
2.7
163
163
L4
F400C-510B
CONTINENTAL
2.7
163
163
L4
F400C-600
CONTINENTAL
2.7
163
F (4)
163
L4
F401C-302
CONTINENTAL
2.7
163
F (4)
163
L4
F-401C-302
CONTINENTAL
2.7
162
162
L4
F401C-403
CONTINENTAL
2.7
163
F (4)
163
L4
F-401C-403
CONTINENTAL
2.7
162
162
L4
F4SE-BB
FORD
3.8
No Model
232
V6
89-95
F4ZZ
FORD
5.0
EXPLORER
302
V8
97-00
F5
FORD
3.0
TAURUS SHO
182
V6
89-95
F5
FORD
3.0
VILLAGER
181
V6
93-99
F5638R
JOHN DEERE
5.0
630
303
L2
56-60
F58E
FORD
3.0
TAURUS
183
V6
97-03
F58E
FORD
3.0
TAURUS
183
V6
96-03
F58E
FORD
3.0
TAURUS
183
V6
00-03
F58E-
FORD
3.0
AEROSTAR
183
V6
90-99
F58E-AA
FORD
3.0
AEROSTAR
183
V6
90-99
F58E-AA
FORD
3.0
TAURUS
183
V6
00-03
F58E-B
FORD
3.0
AEROSTAR
183
V6
90-99
F58E-B
FORD
3.0
TAURUS
183
V6
00-03
F5AE-AA
FORD
3.0
AEROSTAR
183
V6
90-99
F5AE-AA
FORD
3.0
TAURUS
183
V6
00-03
F5DE
FORD
3.0
TAURUS
183
V6
97-03
F5DE
FORD
3.0
TAURUS
183
V6
96-03
F5DE
FORD
3.0
TAURUS
183
V6
00-03
F5DE-
FORD
3.0
AEROSTAR
183
V6
90-99
F5TZ-6012-AA
FORD
4.0
No Model
244
V6
90-02
F600C-217
CONTINENTAL
3.4
F209
209
L6
F600C-217
CONTINENTAL
3.4
F209
209
L6
F600C-217
CONTINENTAL
3.7
F226
226
L6
F600C-217
CONTINENTAL
4.0
245
245
L6
F600C-217
CONTINENTAL
4.0
245
245
L6
F600C-217
JEEP
3.7
No Model
226
L6
54-65
F600C-217
KAISER
3.7
No Model
226
L6
46-50
F600C-243
CONTINENTAL
3.4
F209
209
L6
F600C-243
CONTINENTAL
3.4
F209
209
L6
F600C-243
CONTINENTAL
3.7
F226
226
L6
F600C-243
CONTINENTAL
4.0
245
245
L6
F600C-243
CONTINENTAL
4.0
245
245
L6
F600C-344
CONTINENTAL
3.4
F209
209
L6
F600C-344
CONTINENTAL
3.4
F209
209
L6
F600C-344
CONTINENTAL
3.7
F226
226
L6
F600C-344
CONTINENTAL
4.0
245
245
L6
F600C-344
CONTINENTAL
4.0
245
245
L6
F600C-500A
CONTINENTAL
3.4
F209
209
L6
F600C-500A
CONTINENTAL
3.4
F209
209
L6
F600C-500A
CONTINENTAL
3.7
F226
226
L6
F600C-500A
CONTINENTAL
4.0
245
245
L6
F600C-500A
CONTINENTAL
4.0
245
245
L6
F600C-500A
JEEP
3.7
No Model
226
L6
54-65
F600C-500A
KAISER
3.7
No Model
226
L6
46-50
F600C502A
MACK
3.7
No Model
226
L6
F600C-502A
CONTINENTAL
3.4
F209
209
L6
F600C-502A
CONTINENTAL
3.4
F209
209
L6
F600C-502A
CONTINENTAL
3.7
F226
226
L6
F600C-502A
CONTINENTAL
4.0
245
245
L6
634
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
F600C-502A
CONTINENTAL
4.0
245
245
L6
F600C-502A
JEEP
3.7
No Model
226
L6
54-65
F600C-502A
KAISER
3.7
No Model
226
L6
46-50
F600C504
MACK
3.7
No Model
226
L6
F600C-504
CONTINENTAL
3.4
F209
209
L6
F600C-504
CONTINENTAL
3.4
F209
209
L6
F600C-504
CONTINENTAL
3.7
F226
226
L6
F600C-504
CONTINENTAL
4.0
245
245
L6
F600C-504
CONTINENTAL
4.0
245
245
L6
F600C-506A
JEEP
3.7
No Model
226
L6
54-65
F600C-506A
KAISER
3.7
No Model
226
L6
46-50
F600C-512
CONTINENTAL
4.0
245
245
L6
F600C-512
CONTINENTAL
4.0
245
245
L6
F-600C-512
MILITARY STD
3.6
No Model
218
L6
F-600C-512
MILITARY STD
3.6
No Model
218
L6
F-600C-512
MILITARY STD
4.0
No Model
244
L6
F600C-536
CONTINENTAL
3.4
F209
209
L6
F600C-536
CONTINENTAL
3.4
F209
209
L6
F600C-536
CONTINENTAL
3.7
F226
226
L6
F600C-536
CONTINENTAL
4.0
245
245
L6
F600C-536
CONTINENTAL
4.0
245
245
L6
F600C600
CHECKER
3.7
No Model
226
L6
F600C-600
CONTINENTAL
3.4
F209
209
L6
F600C-600
CONTINENTAL
3.4
F209
209
L6
F600C-600
CONTINENTAL
3.7
F226
226
L6
F600C-600
CONTINENTAL
4.0
245
245
L6
F600C-600
CONTINENTAL
4.0
245
245
L6
F600C-600
REO
3.4
SCS209
209
L6
F600C-600
REO
3.7
No Model
226
L6
F600C-601
CONTINENTAL
3.4
F209
209
L6
F600C-601
CONTINENTAL
3.4
F209
209
L6
F600C-601
CONTINENTAL
3.7
F226
226
L6
F600C-601
CONTINENTAL
4.0
245
245
L6
F600C-601
CONTINENTAL
4.0
245
245
L6
F600C-601
JEEP
3.7
No Model
226
L6
54-65
F600C-601
KAISER
3.7
No Model
226
L6
46-50
F600C606A
MACK
3.7
No Model
226
L6
F600C-606A
CONTINENTAL
3.4
F209
209
L6
F600C-606A
CONTINENTAL
3.4
F209
209
L6
F600C-606A
CONTINENTAL
3.7
F226
226
L6
F600C-606A
CONTINENTAL
4.0
245
245
L6
F600C-606A
CONTINENTAL
4.0
245
245
L6
F600C-606C
JEEP
3.7
No Model
226
L6
54-65
F600C-606C
KAISER
3.7
No Model
226
L6
46-50
F600C-610
CONTINENTAL
4.0
245
245
L6
F65E
FORD
4.6
No Model
W, X
281
V8
91-05
F65E-BB
FORD
4.6
No Model
281
V8
96-01
F68E-BA
FORD
3.8
WINDSTAR
232
V6
96-04
F75EAE
HONDA
2.3
PRELUDE
H23A1
138
L4
92-95
F75EAE
VOLVO
6.7
TD73
409
L6
F75E-AE
CHRYSLER
3.7
No Model
225
V6
02-05
F75E-AE
HONDA
2.3
PRELUDE
H23A1
138
L4
92-95
F75E-AE
KIA
3.5
SEDONA
213
V6
02-04
F8AE-BA
FORD
3.8
WINDSTAR
232
V6
96-04
FD13
RENAULT
1.1
No Model
R688
67
L4
FD17
RENAULT
1.1
No Model
R688
67
L4
FE01
MAZDA
2.0
626
MA
120
L4
84-87
FE01
MAZDA
2.0
B2000
MA
120
L4
84-86
FE-01
MAZDA
2.0
626
FE
122
L4
83-87
635
CID Cyl
Year
47-64

Casting
Manufacturer
Liter
Model
CID Cyl
Year
FE-01
MAZDA
2.0
B2000
FE(1)
FE-01
MAZDA
2.0
No Model
FE
122
L4
83-88
122
L4
FE201
FORD
2.2
PROBE
84-87
133
L4
FE201
FORD
2.2
89-92
PROBE
133
L4
FE201
MAZDA
89-92
2.2
626
F2
133
L4
FE201
88-92
MAZDA
2.2
B2200
F2
133
L4
87-93
FE-4D
MINN MOLINE
4.6
U & UB
284
L4
38-57
FE-4D
MINN MOLINE
4.6
UB
284
L4
38-57
FE50
FORD
2.2
PROBE
133
L4
89-92
FE50
FORD
2.2
PROBE
133
L4
89-92
FE50
MAZDA
2.0
626
MA
120
L4
84-87
FE50
MAZDA
2.0
B2000
MA
120
L4
84-86
FE50
MAZDA
2.2
626
F2
133
L4
88-92
FE-50
MAZDA
2.0
626
FE
122
L4
83-87
FE-50
MAZDA
2.0
B2000
FE(1)
122
L4
83-88
FE-50
MAZDA
2.0
No Model
FE
122
L4
84-87
FS07
FORD
2.0
PROBE
122
L4
93-97
FS07
MAZDA
2.0
626,MR2
FS
122
L4
93-02
FS-2
FORD
2.0
PROBE
122
L4
93-97
FU4
KUBOTA
2.1
K21
126
L4
FU4
NISSAN
2.1
K21
126
L4
G1
CHRYSLER
1.4
No Model
MMC
86
L4
79-84
G1
CHRYSLER
1.5
COLT
91
L4
90-96
G1
CHRYSLER
1.5
COLT
91
L4
85-88
G1
CHRYSLER
1.5
COLT
91
L4
85-88
G1
CHRYSLER
1.5
COLT
91
L4
85-88
G1
CHRYSLER
1.5
COLT
91
L4
89-90
G1
HYUNDAI
1.5
EXCEL
90
L4
86-89
G1
HYUNDAI
1.5
EXCEL
90
L4
90-94
G1
MITSUBISHI
1.4
No Model
86
L4
77-84
G1
MITSUBISHI
1.5
MIRAGE
92
L4
90-99
G1
MITSUBISHI
1.5
MIRAGE
90
L4
85-88
G1
MITSUBISHI
1.5
MIRAGE
90
L4
89-90
G1
MITSUBISHI
1.5
No Model
91
L4
90-94
G10071
CASE
2.1
200B
126
L4
G10071
CASE
2.4
300
148
L4
55-60
G10071
CASE
2.4
310 & 580
G(1)
148
L4
61-66
G10071
CASE
2.4
No Model
148
L4
55-60
G10071
CASE
2.6
530
159
L4
G10071
CASE
2.7
350 TRACTOR
164
L4
G-10071
CASE
2.1
No Model
126
L4
G11071
CASE
2.1
200B
126
L4
G11071
CASE
2.4
310 & 580
G(1)
148
L4
G11071
CASE
2.6
530
159
L4
G11071
CASE
2.7
350 TRACTOR
164
L4
G-11071
CASE
2.1
No Model
126
L4
G-11071
CASE
2.4
No Model
148
L4
G11700
CASE
2.1
200B
126
L4
G11700
CASE
2.4
300
148
L4
G11700
CASE
2.6
530
159
L4
G11700
CASE
2.7
350 TRACTOR
164
L4
G-11700
CASE
2.1
No Model
126
L4
G-11700
CASE
2.4
No Model
148
L4
55-60
G11701
CASE
2.4
300
148
L4
55-60
G11707
CASE
2.4
300
148
L4
55-60
G11707
CASE
2.4
310 & 580
G(1)
148
L4
61-66
G11707
CASE
2.6
530
159
L4
G11707
CASE
2.7
350 TRACTOR
164
L4
G-11707
CASE
2.4
No Model
148
L4
636
VIN
61-66
55-60
55-60
55-60

Casting
Manufacturer
Liter
Model
G-11707
CASE
2.6
No Model
159
L4
G-11707
CASE
2.7
885
164
L3
G11708
CASE
2.7
350 TRACTOR
164
L4
G11709
CASE
2.4
300
148
L4
55-60
G11709
CASE
2.4
310 & 580
G(1)
148
L4
61-66
G11709
CASE
2.6
530
159
L4
G11709
CASE
2.7
350 TRACTOR
164
L4
G-11709
CASE
2.4
No Model
148
L4
G-11709
CASE
2.6
No Model
159
L4
G-11709
CASE
2.7
885
164
L3
G11740
CASE
3.1
430
188
L4
G-11740
CASE
3.1
430
188
L4
G-11741
CASE
3.1
430
188
L4
G13A
SUZUKI
1.3
SAMURAI
79
L4
85-95
G16
SUZUKI
1.6
No Model
97
L4
89-95
G1600X119
HERCULES
2.7
G1600
163
L4
G176C-300
CONTINENTAL
2.9
G176
176
L4
G176C-300C
CONTINENTAL
2.9
G176
176
L4
G176C-300C
MASSEY FERGUSON
2.6
MF65
157
L4
G193C-202
CONTINENTAL
3.2
G193
193
L4
G193C-403
CONTINENTAL
3.2
G193
193
L4
G-1-U
TOYOTA
2.0
CELICA
120
L4
G37
CHRYSLER
1.8
COLT
110
L4
92
G37
HYUNDAI
1.8
ELANTRA
107
L4
93-94
G37
MITSUBISHI
1.8
ECLIPSE
107
L4
90-92
G37
MITSUBISHI
1.8
No Model
110
L4
92-94
G46
TOYOTA
1.6
COROLLA
2T-C
97
L4
71-79
G52
CHRYSLER
1.8
COLT
110
L4
92
G52
CHRYSLER
1.8
COLT
107
L4
93-94
G52
CHRYSLER
2.0
COLT
MMC
122
L4
75-88
G52
CHRYSLER
2.0
COLT
MMC
122
L4
75-88
G52
CHRYSLER
2.6
No Model
156
L4
78-80
G52
CHRYSLER
2.6
No Model
156
L4
83-86
G52
CHRYSLER
2.6
RAM-50
156
L4
81-85
G52
CHRYSLER
2.6
RAM-50
156
L4
85-89
G52
MITSUBISHI
1.8
ECLIPSE
107
L4
93-94
G52
MITSUBISHI
2.0
4G52
122
L4
G52
MITSUBISHI
2.0
4G52
122
L4
G52
MITSUBISHI
2.0
No Model
122
L4
74-82
G52
MITSUBISHI
2.6
No Model
156
L4
83-89
G54
CHRYSLER
2.0
COLT
MMC
122
L4
75-88
G54
CHRYSLER
2.6
CONQUEST
156
L4
84-88
G54
CHRYSLER
2.6
No Model
156
L4
78-80
G54
CHRYSLER
2.6
No Model
156
L4
79-82
G54
CHRYSLER
2.6
No Model
156
L4
83-86
G54
CHRYSLER
2.6
RAM-50
156
L4
81-85
G54
CHRYSLER
2.6
RAM-50
156
L4
85-89
G54
MAZDA
2.6
B2600
G54
156
L4
86-88
G54
MITSUBISHI
2.0
No Model
122
L4
74-82
G54
MITSUBISHI
2.6
MONTERO
156
L4
83-85
G54
MITSUBISHI
2.6
MONTERO
156
L4
86-90
G54
MITSUBISHI
2.6
No Model
156
L4
83-89
G54
MITSUBISHI
2.6
No Model
156
L4
83-85
G54
MITSUBISHI
2.6
No Model
156
L4
86-89
G54
MITSUBISHI
2.6
STARION
156
L4
84-85
G54
MITSUBISHI
2.6
STARION
156
L4
86-87
G6
CHRYSLER
2.0
COLT
MMC
122
L4
75-88
G6
CHRYSLER
2.0
COLT
122
L4
90-94
G6
CHRYSLER
2.0
LASER
122
L4
93-94
637
VIN
18R-C
CID Cyl
Year
55-60
71-74

Casting
Manufacturer
Liter
Model
CID Cyl
Year
G6
CHRYSLER
2.0
TALON
G6
CHRYSLER
2.0
TALON
122
L4
93-98
122
L4
G6
MITSUBISHI
2.0
4G52
90-92
122
L4
G6
MITSUBISHI
2.0
ECLIPSE
G6
MITSUBISHI
2.0
ECLIPSE
122
L4
93-94
122
L4
G6
MITSUBISHI
2.0
ECLIPSE
95-99
122
L4
G6
MITSUBISHI
2.0
No Model
90-92
122
L4
G6
MITSUBISHI
2.0
No Model
74-82
122
L4
G60-1
MAZDA
2.6
B2600
90-92
159
L4
G93
CHRYSLER
1.8
COLT
89-95
110
L4
G9-37
TOYOTA
1.6
COROLLA
2T-C
93-94
97
L4
GD193C-600
CONTINENTAL
3.2
G193
71-79
193
L4
GE
CHRYSLER
2.0
COLT
GE
CHRYSLER
2.0
TALON
122
L4
90-94
122
L4
GN
FORD
1.8
90-92
COURIER
110
L4
GN
FORD
72-78
2.0
COURIER
122
L4
GN
79-80
FORD
2.0
No Model
122
L4
81-82
GN
MAZDA
1.8
No Model
112
L4
75-84
GSI
ISUZU
1.6
IMPULSE
97
L4
90-91
FORD
7.0
No Model
429
V8
68-73
H11044
BUDA
4.8
No Model
294
L6
H11044
BUDA
5.3
No Model
325
L6
H225R
JOHN DEERE
1.6
100
L2
H260C-602
CONTINENTAL
4.0
HD243
243
L4
H260C-602
CONTINENTAL
4.3
HD260
260
L4
H260C-602
CONTINENTAL
4.5
No Model
277
L4
H260C-603
CONTINENTAL
4.0
HD243
243
L4
H260C-603
CONTINENTAL
4.3
HD260
260
L4
H260C-603
CONTINENTAL
4.5
No Model
277
L4
H56711
CUMMINS
11.0
H672
672
L6
40-68
H56711
CUMMINS
11.0
H672
672
L6
40-68
H56711
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
H6240
NISSAN
1.4
210
A14
85
L4
79-80
H6240
NISSAN
1.4
210
A14
85
L4
81-82
H6240
NISSAN
1.4
B210
A14
85
L4
75-77
H6240
NISSAN
1.4
B210
A14
85
L4
78
H6601861
CHRYSLER
1.7
No Model
105
L4
66-70
H6601861
HILLMAN
1.7
No Model
105
L4
66-70
H89
NISSAN
1.3
No Model
A13
79
L4
74
H9740
NISSAN
1.2
No Model
A12A
76
L4
80
H9740
NISSAN
1.2
No Model
A12A
76
L4
81-82
HAWK
PACKARD
5.2
No Model
320
L8
55
HAWK
PACKARD
5.8
No Model
352
V8
55-56
HAWK
PACKARD
6.1
No Model
374
L8
51-56
HAWK
STUDEBAKER
5.7
No Model
352
V8
56-59
HD260C-204
CONTINENTAL
4.0
HD243
243
L4
HD260C-204
CONTINENTAL
4.3
HD260
260
L4
HD260C-204
CONTINENTAL
4.5
No Model
277
L4
HD260C-424
CONTINENTAL
4.0
HD243
243
L4
HD260C-424
CONTINENTAL
4.3
HD260
260
L4
HD260C-424
CONTINENTAL
4.5
No Model
277
L4
HE-401-A
MINN MOLINE
9.9
No Model
605
L6
55-67
HRC 2683
ROVER
4.0
No Model
97
241
V8
97-00
HU
FORD
7.0
No Model
429
V8
68-73
I700557C1
NAVISTAR
9.0
No Model
551
V8
78-85
IH625R2
NAVISTAR
3.9
544
D239
239
L4
J049
RENAULT
1.0
No Model
58
L4
62-67
J049
RENAULT
1.1
No Model
68
L4
59-71
J382C-600C
CONTINENTAL
6.3
JD382
382
L4
638
VIN
45-55

Casting
Manufacturer
Liter
Model
VIN
J382C602
CONTINENTAL
6.3
JD382
382
L4
J382C-602
CONTINENTAL
6.3
JD382
382
L4
J3B30
NISSAN
1.5
J15
90
L4
JD382C-204
CONTINENTAL
6.3
JD382
382
L4
JD382C-224
CONTINENTAL
6.3
JD382
382
L4
JE
MAZDA
3.0
929
JE
180
V6
88-89
JE
MAZDA
3.0
929
JE
180
V6
90-97
JG
TOYOTA
1.9
CROWN
113
L4
66-69
GM
1.3
METRO
79
L4
98-00
MAZDA
1.6
No Model
97
L4
70-81
K-101
GM
1.0
FIREFLY
61
L3
89-00
K-101
GM
1.0
SPRINT
61
L3
86-88
K24504
WAUKESHA
1.9
113
113
L4
K24504
WAUKESHA
2.2
180DLC
133
L4
K-24504D
NAVISTAR
2.2
F-12
132
L4
K40263
BUDA
5.3
No Model
325
L6
K40263
BUDA
6.0
No Model
369
L6
K40263
BUDA
6.4
No Model
393
L6
K40263
BUDA
7.0
No Model
430
L6
K600C-303
CONTINENTAL
4.2
M253
253
L6
K600C-303
CONTINENTAL
4.4
K271
271
L6
K600C-303
CONTINENTAL
4.8
290
K&M
290
L6
K600C-303
CONTINENTAL
5.4
K330
K&M
330
L6
K600C-303
CONTINENTAL
6.5
No Model
396
L6
K600C-600
CONTINENTAL
6.0
363
K&M
363
L6
K600C-600
CONTINENTAL
6.1
371
B&T
371
L6
KE-401-B
MINN MOLINE
4.6
U & UB
284
L4
38-57
KE-401-B
MINN MOLINE
4.6
UB
284
L4
38-57
KL
MAZDA
2.5
626
KL
153
V6
93-00
KL01
MAZDA
2.5
626
KL
153
V6
93-00
KLC7
MAZDA
2.5
626
KL
153
V6
93-00
KN
GM
1.6
TRACKER
97
L4
89-96
K-N
GM
1.6
TRACKER
97
L4
95-99
K-N
GM
1.6
TRACKER
97
L4
89-96
K-N
SUZUKI
1.6
No Model
97
L4
89-95
KN10
GM
1.5
SPECTRUM
92
L4
85-87
KN224
HONDA
3.2
PASSPORT
193
V6
94-97
KN224
HONDA
3.2
PASSPORT
193
V6
94-02
KN224
ISUZU
3.2
TROOPER
193
V6
92-04
KN8
GM
1.5
SPECTRUM
92
L4
85-87
L1
TOYOTA
2.2
CELICA
20R
134
L4
75-77
L1
TOYOTA
2.2
CELICA
20R
134
L4
78-80
L1
TOYOTA
2.4
No Model
22R
144
L4
81-84
L1
TOYOTA
2.4
No Model
22R
144
L4
81-84
L-1M
TOYOTA
1.9
CROWN
113
L4
66-69
L-1-M
TOYOTA
2.0
CELICA
18R-C
120
L4
71-74
L20
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
L3
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
L4102T
JOHN DEERE
1.1
L SERIES
66
L2
31-42
L4102T
JOHN DEERE
1.3
LA SERIES
77
L2
41-46
L4124T
JOHN DEERE
1.1
L SERIES
66
L2
31-42
L4124T
JOHN DEERE
1.3
LA SERIES
77
L2
41-46
L4612T
JOHN DEERE
1.1
L SERIES
66
L2
31-42
L4612T
JOHN DEERE
1.3
LA SERIES
77
L2
41-46
LE401
MINN MOLINE
6.6
GB
403
L4
47-61
LE-401
MINN MOLINE
6.6
GB
403
L4
47-61
LH
FORD
1.8
COURIER
110
L4
72-78
LH
MAZDA
1.8
No Model
110
L4
70-79
LR
OPEL
1.2
No Model
74
L4
61-62
FL
639
CID Cyl
Year
69-90

Casting
Manufacturer
Liter
Model
CID Cyl
Year
LR
OPEL
1.5
No Model
LR
OPEL
1.7
No Model
90
L4
59-62
104
L4
M1692
JOHN DEERE
1.6
40
62-65
100
L2
M1692T
JOHN DEERE
1.6
52-57
40
100
L2
M1692T
JOHN DEERE
52-57
1.6
40
100
L2
M1692T
52-57
JOHN DEERE
1.6
No Model
100
L2
52-57
M1692T
JOHN DEERE
1.6
No Model
100
L2
52-57
M1692T
JOHN DEERE
1.9
420
113
L2
M1692T
JOHN DEERE
1.9
420
113
L2
M1692T
JOHN DEERE
1.9
430
113
L2
M1692T
JOHN DEERE
1.9
430
113
L2
M1692T
JOHN DEERE
1.9
440
113
L2
M1692T
JOHN DEERE
1.9
440
113
L2
M3114T
JOHN DEERE
1.6
40
100
L2
52-57
M3114T
JOHN DEERE
1.6
No Model
100
L2
52-57
M3114T
JOHN DEERE
1.6
No Model
100
L2
52-57
M3114T
JOHN DEERE
1.9
420
113
L2
M3114T
JOHN DEERE
1.9
430
113
L2
M3114T
JOHN DEERE
1.9
440
113
L2
M3114T
JOHN DEERE
1.9
440
113
L2
M450T
JOHN DEERE
1.6
40
100
L2
52-57
M450T
JOHN DEERE
1.6
No Model
100
L2
52-57
M450T
JOHN DEERE
1.6
No Model
100
L2
52-57
M450T
JOHN DEERE
1.9
420
113
L2
M450T
JOHN DEERE
1.9
420
113
L2
M450T
JOHN DEERE
1.9
430
113
L2
M450T
JOHN DEERE
1.9
430
113
L2
M450T
JOHN DEERE
1.9
440
113
L2
M450T
JOHN DEERE
1.9
440
113
L2
M450-T
JOHN DEERE
1.6
40
100
L2
M600C-203
CONTINENTAL
4.2
M253
253
L6
M600C-203
CONTINENTAL
4.4
K271
271
L6
M600C-203
CONTINENTAL
4.8
290
K&M
290
L6
M600C-203
CONTINENTAL
5.4
K330
K&M
330
L6
M600C-203
CONTINENTAL
6.5
No Model
396
L6
M600C-302
CONTINENTAL
4.2
M253
253
L6
M600C-302
CONTINENTAL
4.4
K271
271
L6
M600C-302
CONTINENTAL
4.8
290
K&M
290
L6
M600C-302
CONTINENTAL
5.4
K330
K&M
330
L6
M600C-302
CONTINENTAL
6.5
No Model
396
L6
M600C-303
CONTINENTAL
4.2
M253
253
L6
M600C-303
CONTINENTAL
4.4
K271
271
L6
M600C-303
CONTINENTAL
4.8
290
K&M
290
L6
M600C-303
CONTINENTAL
5.4
K330
K&M
330
L6
M600C-303
CONTINENTAL
6.5
No Model
396
L6
M600C-335
CONTINENTAL
6.0
363
K&M
363
L6
M600C-335
CONTINENTAL
6.1
371
B&T
371
L6
M600C501
MACK
4.1
No Model
253
L6
M600C501
MACK
4.4
No Model
270
L6
M600C501
MACK
4.8
No Model
290
L6
M600C501
MACK
5.4
No Model
330
L6
M600C-501
CONTINENTAL
4.2
M253
253
L6
M600C-501
CONTINENTAL
4.4
K271
271
L6
M600C-501
CONTINENTAL
4.8
290
K&M
290
L6
M600C-501
CONTINENTAL
5.4
K330
K&M
330
L6
M600C-501
CONTINENTAL
6.5
No Model
396
L6
M60768
BUDA
10.6
No Model
648
L4
M750
FORD
0.7
LEK752C2
43
L2
M750
FORD
0.7
LEK757C
43
L2
640
VIN
52-57

Casting
Manufacturer
Liter
Model
VIN
M750
FORD
0.8
LEK802D
49
L2
M750
FORD
0.8
LEK802D/1200
49
L2
M750
FORD
0.9
CM224
58
L3
M750
FORD
0.9
S723
53
L3
M750
FORD
1.1
K773
68
L3
M750
FORD
1.1
LET862C
69
L2
M750
FORD
1.3
LE892
77
L2
M750
FORD
1.4
H843
85
L3
M750
FORD
1.4
LEM853
87
L3
MB3C7
FORD
1.3
FESTIVA,ASPIRE
MFF
TOYOTA
1.9
No Model
TOYOTA
2.2
CELICA
TOYOTA
2.2
TOYOTA
Year
81
L4
89-97
113
L4
69-71
20R
134
L4
75-77
CELICA
20R
134
L4
78-80
2.4
No Model
22R
144
L4
81-84
TOYOTA
2.4
No Model
22R
144
L4
81-84
N14094624
GM
3.0
No Model
IND
181
L4
74-93
N353039
GM
7.4
No Model
454
V8
75-76
N353039
GM
7.4
No Model
454
V8
87-90
N353039
GM
7.4
No Model
454
V8
76-79
N353039
GM
7.4
No Model
454
V8
80-81
N353039
GM
7.4
No Model
454
V8
80-86
N353039
GM
7.4
No Model
454
V8
87-90
N353039
GM
7.4
No Model
454
V8
76-78
N353039
GM
7.4
No Model
454
V8
70-75
N3937
MERCRUISER
3.0
No Model
IND
181
L4
74-93
N393775
GM
3.0
No Model
IND
181
L4
74-93
N393775
MERCRUISER
3.0
No Model
IND
181
L4
74-93
N393776
GM
3.0
No Model
IND
181
L4
74-93
N3941352
GM
3.0
No Model
IND
181
L4
74-93
N3941352
MERCRUISER
3.0
No Model
IND
181
L4
74-93
N5154701
DDC
4.7
4-71 2VALVE
284
L4
N5154701
DDC
4.7
4-71 4VALVE
284
L4
N5154701
DDC
4.7
4-71 CROSS-HEAD
284
L4
N5154701
DDC
4.7
4-71E
284
L4
N5154701
DDC
4.7
4-71M
284
L4
N5154701
DDC
4.7
4-71N
284
L4
N5154701
DDC
4.7
4-71T
284
L4
N62A500
ALLIS CHALMERS
1.0
62
L4
N62C-500
ALLIS CHALMERS
1.0
62
L4
N62C-500
CONTINENTAL
0.9
N56
56
L4
N62C-500
CONTINENTAL
1.0
62
L4
N7
KUBOTA
1.9
CT4-114
114
L4
N7
KUBOTA
1.9
V1902-B
114
L4
N741
FORD
0.9
CM224
58
L3
NH0123
CUMMINS
11.0
H672
672
L6
NH0123
CUMMINS
12.2
NH 220 SERIES
NH
743
L6
O-191561
GM
No Model
409
V8
O5844
ALLIS CHALMERS
13.8
16000T
844
L6
O5844
ALLIS CHALMERS
15.9
No Model
971
L6
OBA
FORD
3.9
No Model
239
V8
46-53
OK
GM
1.6
TRACKER
97
L4
89-96
OM352
MERCEDES BENZ
5.7
OM352
352
346
L6
OR1206
CATERPILLAR
5.2
3204
DI
318
L4
OR1206
CATERPILLAR
5.2
3204
DI(2)
318
L4
OR1206
CATERPILLAR
5.2
3204
PC
318
L4
OR1209
CATERPILLAR
5.2
3204
DI
318
L4
OR1209
CATERPILLAR
5.2
3204
DI(2)
318
L4
OR1209
CATERPILLAR
5.2
3204
PC
318
L4
OR1212
CATERPILLAR
7.0
3304
CB
425
L4
6.7
641
CID Cyl
40-68
59-66

Casting
Manufacturer
Liter
Model
VIN
OR1212
CATERPILLAR
7.0
3304
DI
425
L4
OR1212
CATERPILLAR
7.0
3304
SP
425
L4
OR1212
CATERPILLAR
7.0
D330C
CB
425
L4
OR1212
CATERPILLAR
7.0
D330C
SP
425
L4
OR1214
CATERPILLAR
7.0
3304
CB
425
L4
OR1214
CATERPILLAR
7.0
3304
DI
425
L4
OR1214
CATERPILLAR
7.0
3304
SP
425
L4
OR1214
CATERPILLAR
7.0
D330C
CB
425
L4
OR1214
CATERPILLAR
7.0
D330C
SP
425
L4
OR1215
CATERPILLAR
10.5
1673C
CB
638
L6
OR1215
CATERPILLAR
10.5
1673C
SP
638
L6
OR1215
CATERPILLAR
10.5
3306
CB
638
L6
OR1215
CATERPILLAR
10.5
3306
DI
638
L6
OR1215
CATERPILLAR
10.5
3306
SP
638
L6
OR1215
CATERPILLAR
10.5
D333C
CB
638
L6
OR1215
CATERPILLAR
10.5
D333C
SP
638
L6
OR1217
CATERPILLAR
10.5
1673C
CB
638
L6
OR1217
CATERPILLAR
10.5
1673C
SP
638
L6
OR1217
CATERPILLAR
10.5
3306
CB
638
L6
OR1217
CATERPILLAR
10.5
3306
DI
638
L6
OR1217
CATERPILLAR
10.5
3306
SP
638
L6
OR1217
CATERPILLAR
10.5
D333C
CB
638
L6
OR1217
CATERPILLAR
10.5
D333C
SP
638
L6
OR5018
CATERPILLAR
8.6
1673
CB
525
L6
OR5018
CATERPILLAR
8.6
D333
CB
525
L6
OR5018
CATERPILLAR
10.5
1673C
CB
638
L6
OR5018
CATERPILLAR
10.5
1673C
SP
638
L6
OR5018
CATERPILLAR
10.5
3306
CB
638
L6
OR5018
CATERPILLAR
10.5
3306
DI
638
L6
OR5018
CATERPILLAR
10.5
3306
SP
638
L6
OR5018
CATERPILLAR
10.5
3306
SP
638
L6
OR5018
CATERPILLAR
10.5
334
638
L6
OR5018
CATERPILLAR
10.5
D333C
CB
638
L6
OR5018
CATERPILLAR
10.5
D333C
SP
638
L6
OR5021
CATERPILLAR
7.0
3304
CB
425
L4
OR5021
CATERPILLAR
7.0
3304
DI
425
L4
OR5021
CATERPILLAR
7.0
3304
SP
425
L4
OR5021
CATERPILLAR
7.0
D330C
CB
425
L4
OR5021
CATERPILLAR
7.0
D330C
SP
425
L4
OR5024
CATERPILLAR
5.2
3204
DI
318
L4
OR5024
CATERPILLAR
5.2
3204
DI(2)
318
L4
OR5024
CATERPILLAR
5.2
3204
PC
318
L4
OR5026
CATERPILLAR
14.6
3406
893
L6
OR5026
CATERPILLAR
14.6
3406
893
L6
OR5026
CATERPILLAR
14.6
3406
SP
893
L6
OR5029
CATERPILLAR
24.1
353
1473
L6
OR5029
CATERPILLAR
24.1
353
1473
L6
OR5031
CATERPILLAR
14.6
1693
893
L6
OR5031
CATERPILLAR
14.6
1693
893
L6
OR5031
CATERPILLAR
14.6
1693
893
L6
OR5031
CATERPILLAR
14.6
1693
893
L6
OR5031
CATERPILLAR
14.6
1693
893
L6
OR5031
CATERPILLAR
14.6
343
893
L6
OR5031
CATERPILLAR
14.6
D343
893
L6
OR5031
CATERPILLAR
14.6
D343
893
L6
OR5031
CATERPILLAR
14.6
G343
893
L6
OR5033
CATERPILLAR
19.5
D346
1191
V8
OR5033
CATERPILLAR
19.5
D346
1191
V8
OR5037
CATERPILLAR
29.3
D348
1786
V 12
C/B
642
CID Cyl
Year

Casting
Manufacturer
Liter
Model
OR5045
CATERPILLAR
20.4
D342
1246
L6
OR5045
CATERPILLAR
20.4
D342
1246
L6
OR5045
CATERPILLAR
20.4
D342
1246
L6
OR5045
CATERPILLAR
20.4
D342
1246
L6
OR5045
CATERPILLAR
20.4
D342
1246
L6
OR5045
CATERPILLAR
20.4
D8
1246
L6
OR5045
CATERPILLAR
20.4
D8
1246
L6
OR5045
CATERPILLAR
20.4
D8
1246
L6
OR5045
CATERPILLAR
20.4
D8K
1246
L6
OR5045
CATERPILLAR
20.4
D8K
1246
L6
OR5045
CATERPILLAR
20.4
G342
1246
L6
OR5045
CATERPILLAR
20.4
G342
1246
L6
OR5047
CATERPILLAR
10.5
1674
638
L6
OR5047
CATERPILLAR
10.5
1674
638
L6
OR5047
CATERPILLAR
10.5
1674
638
L6
OR5047
CATERPILLAR
10.5
D334
638
L6
OR5047
CATERPILLAR
10.5
D334
638
L6
OR5047
CATERPILLAR
10.5
D334
638
L6
OR5053
CATERPILLAR
10.4
3208
636
V8
OR5053
CATERPILLAR
10.4
3208
636
V8
OR5053
CATERPILLAR
10.4
3208
636
V8
OR5053
CATERPILLAR
10.4
3208
TURBO
636
V8
OR5055
CATERPILLAR
32.2
379
1964
V8
OR5055
CATERPILLAR
32.2
D379
1964
V8
OR5056
CATERPILLAR
32.2
379
1964
V8
OR5056
CATERPILLAR
32.2
D379
1964
V8
OR5058
CATERPILLAR
48.3
398
2946
V 12
OR5058
CATERPILLAR
48.8
D398
2976
V 12
OR5059
CATERPILLAR
48.3
398
2946
V 12
OR5059
CATERPILLAR
48.8
D398
2976
V 12
OR5061
CATERPILLAR
64.4
D399
3928
V 16
OR5062
CATERPILLAR
64.4
D399
3928
V 16
OR5063
CATERPILLAR
69.0
3516
4210
V 16
OR5066
CATERPILLAR
18.0
3408
1099
V8
OR5066
CATERPILLAR
18.0
D8L
1099
V8
OR5067
CATERPILLAR
18.0
3408
1099
V8
OR5067
CATERPILLAR
18.0
D8L
1099
V8
OR5069
CATERPILLAR
27.0
3412
1649
V 12
OR5070
CATERPILLAR
27.0
3412
1649
V 12
OR5072
CATERPILLAR
20.4
D342
1246
L6
OR5072
CATERPILLAR
20.4
D342
1246
L6
OR5072
CATERPILLAR
20.4
D342
1246
L6
OR5072
CATERPILLAR
20.4
D342
1246
L6
OR5072
CATERPILLAR
20.4
D342
1246
L6
OR5072
CATERPILLAR
20.4
D8
1246
L6
OR5072
CATERPILLAR
20.4
D8
1246
L6
OR5072
CATERPILLAR
20.4
D8
1246
L6
OR5072
CATERPILLAR
20.4
D8K
1246
L6
OR5072
CATERPILLAR
20.4
D8K
1246
L6
OR5072
CATERPILLAR
20.4
G342
1246
L6
OR5072
CATERPILLAR
20.4
G342
1246
L6
OR5074
CATERPILLAR
39.0
D349
2382
V 16
OR5077
CATERPILLAR
19.5
D346
1191
V8
OR5077
CATERPILLAR
19.5
D346
1191
V8
OR5080
CATERPILLAR
20.4
D342
1246
L6
OR5080
CATERPILLAR
20.4
D342
1246
L6
OR5080
CATERPILLAR
20.4
D342
1246
L6
OR5080
CATERPILLAR
20.4
D342
1246
L6
OR5080
CATERPILLAR
20.4
D342
1246
L6
643
VIN
CID Cyl
Year
87-92

Casting
Manufacturer
Liter
Model
OR5080
CATERPILLAR
29.3
D348
1786
V 12
OR5083
CATERPILLAR
20.4
D342
1246
L6
OR5083
CATERPILLAR
20.4
D342
1246
L6
OR5083
CATERPILLAR
20.4
D342
1246
L6
OR5083
CATERPILLAR
20.4
D342
1246
L6
OR5083
CATERPILLAR
20.4
D342
1246
L6
OR5083
CATERPILLAR
39.0
D349
2382
V 16
OR5084
CATERPILLAR
39.0
D349
2382
V 16
OR5086
CATERPILLAR
19.5
D346
1191
V8
OR5086
CATERPILLAR
19.5
D346
1191
V8
OR5089
CATERPILLAR
29.3
D348
1786
V 12
OR5090
CATERPILLAR
29.3
D348
1786
V 12
OR5092
CATERPILLAR
29.3
D348
1786
V 12
OR5093
CATERPILLAR
29.3
D348
1786
V 12
OR5095
CATERPILLAR
39.0
D349
2382
V 16
OR5096
CATERPILLAR
39.0
D349
2382
V 16
OR5098
CATERPILLAR
19.5
D346
1191
V8
OR5098
CATERPILLAR
19.5
D346
1191
V8
OR5124
CATERPILLAR
14.6
1693
893
L6
OR5124
CATERPILLAR
14.6
1693
893
L6
OR5124
CATERPILLAR
14.6
1693
893
L6
OR5124
CATERPILLAR
14.6
1693
893
L6
OR5124
CATERPILLAR
14.6
1693
893
L6
OR5124
CATERPILLAR
14.6
D343
893
L6
OR5124
CATERPILLAR
14.6
D343
893
L6
OR5126
CATERPILLAR
14.6
1693
893
L6
OR5126
CATERPILLAR
14.6
1693
893
L6
OR5126
CATERPILLAR
14.6
1693
893
L6
OR5126
CATERPILLAR
14.6
1693
893
L6
OR5126
CATERPILLAR
14.6
1693
893
L6
OR5126
CATERPILLAR
14.6
D343
893
L6
OR5126
CATERPILLAR
14.6
D343
893
L6
OR5129
CATERPILLAR
14.6
3406
893
L6
OR5129
CATERPILLAR
14.6
3406
893
L6
OR5129
CATERPILLAR
14.6
3406
SP
893
L6
OR5132
CATERPILLAR
14.6
3406
893
L6
OR5132
CATERPILLAR
14.6
3406
893
L6
OR5132
CATERPILLAR
14.6
3406
SP
893
L6
OR5134
CATERPILLAR
19.5
D346
1191
V8
OR5134
CATERPILLAR
19.5
D346
1191
V8
OR5135
CATERPILLAR
19.5
D346
1191
V8
OR5135
CATERPILLAR
19.5
D346
1191
V8
OR5137
CATERPILLAR
19.5
D346
1191
V8
OR5137
CATERPILLAR
19.5
D346
1191
V8
OR5138
CATERPILLAR
19.5
D346
1191
V8
OR5138
CATERPILLAR
19.5
D346
1191
V8
OR5163
CATERPILLAR
10.4
3208
636
V8
OR5163
CATERPILLAR
10.4
3208
636
V8
OR5163
CATERPILLAR
10.4
3208
636
V8
OR5163
CATERPILLAR
10.4
3208
TURBO
636
V8
OR5164
CATERPILLAR
5.2
3204
DI
318
L4
OR5164
CATERPILLAR
5.2
3204
DI(2)
318
L4
OR5164
CATERPILLAR
5.2
3204
PC
318
L4
OR5166
CATERPILLAR
7.0
3304
CB
425
L4
OR5166
CATERPILLAR
7.0
3304
DI
425
L4
OR5166
CATERPILLAR
7.0
3304
SP
425
L4
OR5166
CATERPILLAR
7.0
D330C
CB
425
L4
OR5166
CATERPILLAR
7.0
D330C
SP
425
L4
OR5167
CATERPILLAR
7.0
3304
CB
425
L4
644
VIN
CID Cyl
Year
87-92

Casting
Manufacturer
Liter
Model
VIN
OR5167
CATERPILLAR
7.0
3304
DI
425
L4
OR5167
CATERPILLAR
7.0
3304
SP
425
L4
OR5167
CATERPILLAR
7.0
D330C
CB
425
L4
OR5167
CATERPILLAR
7.0
D330C
SP
425
L4
OR5169
CATERPILLAR
7.0
3304
CB
425
L4
OR5169
CATERPILLAR
7.0
3304
DI
425
L4
OR5169
CATERPILLAR
7.0
3304
SP
425
L4
OR5169
CATERPILLAR
7.0
D330C
CB
425
L4
OR5169
CATERPILLAR
7.0
D330C
SP
425
L4
OR5170
CATERPILLAR
7.0
3304
CB
425
L4
OR5170
CATERPILLAR
7.0
3304
DI
425
L4
OR5170
CATERPILLAR
7.0
3304
SP
425
L4
OR5170
CATERPILLAR
7.0
D330C
CB
425
L4
OR5170
CATERPILLAR
7.0
D330C
SP
425
L4
OR5172
CATERPILLAR
10.5
1673C
CB
638
L6
OR5172
CATERPILLAR
10.5
1673C
SP
638
L6
OR5172
CATERPILLAR
10.5
3306
CB
638
L6
OR5172
CATERPILLAR
10.5
3306
DI
638
L6
OR5172
CATERPILLAR
10.5
3306
SP
638
L6
OR5172
CATERPILLAR
10.5
D333C
CB
638
L6
OR5172
CATERPILLAR
10.5
D333C
SP
638
L6
OR5173
CATERPILLAR
10.5
1673C
CB
638
L6
OR5173
CATERPILLAR
10.5
1673C
SP
638
L6
OR5173
CATERPILLAR
10.5
3306
CB
638
L6
OR5173
CATERPILLAR
10.5
3306
DI
638
L6
OR5173
CATERPILLAR
10.5
3306
SP
638
L6
OR5173
CATERPILLAR
10.5
D333C
CB
638
L6
OR5173
CATERPILLAR
10.5
D333C
SP
638
L6
OR5175
CATERPILLAR
10.5
1673C
CB
638
L6
OR5175
CATERPILLAR
10.5
1673C
SP
638
L6
OR5175
CATERPILLAR
10.5
3306
CB
638
L6
OR5175
CATERPILLAR
10.5
3306
DI
638
L6
OR5175
CATERPILLAR
10.5
3306
SP
638
L6
OR5175
CATERPILLAR
10.5
D333C
CB
638
L6
OR5175
CATERPILLAR
10.5
D333C
SP
638
L6
OR5176
CATERPILLAR
10.5
1673C
CB
638
L6
OR5176
CATERPILLAR
10.5
1673C
SP
638
L6
OR5176
CATERPILLAR
10.5
3306
CB
638
L6
OR5176
CATERPILLAR
10.5
3306
DI
638
L6
OR5176
CATERPILLAR
10.5
3306
SP
638
L6
OR5176
CATERPILLAR
10.5
D333C
CB
638
L6
OR5176
CATERPILLAR
10.5
D333C
SP
638
L6
OR5179
CATERPILLAR
18.0
3408
1099
V8
OR5179
CATERPILLAR
18.0
D8L
1099
V8
OR5181
CATERPILLAR
20.4
D342
1246
L6
OR5181
CATERPILLAR
20.4
D342
1246
L6
OR5181
CATERPILLAR
20.4
D342
1246
L6
OR5181
CATERPILLAR
20.4
D342
1246
L6
OR5181
CATERPILLAR
20.4
D342
1246
L6
OR5184
CATERPILLAR
20.4
D342
1246
L6
OR5184
CATERPILLAR
20.4
D342
1246
L6
OR5184
CATERPILLAR
20.4
D342
1246
L6
OR5184
CATERPILLAR
20.4
D342
1246
L6
OR5184
CATERPILLAR
20.4
D342
1246
L6
OR5186
CATERPILLAR
24.1
353
1473
L6
OR5186
CATERPILLAR
24.1
353
1473
L6
OR5339
CATERPILLAR
27.0
3412
1649
V 12
OR5341
CATERPILLAR
32.2
379
1964
V8
OR5341
CATERPILLAR
32.2
D379
1964
V8
C/B
645
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
OR5343
CATERPILLAR
48.3
398
2946
V 12
OR5343
CATERPILLAR
48.8
D398
2976
V 12
OR5345
CATERPILLAR
64.4
D399
3928
V 16
OR5401
CATERPILLAR
39.0
D349
2382
V 16
OR5434
CATERPILLAR
34.5
3508
2105
V8
OR5435
CATERPILLAR
51.8
3512
3158
V 12
OR5437
CATERPILLAR
69.0
3516
4210
V 16
OR5474
CATERPILLAR
5.2
3204
DI
318
L4
OR5474
CATERPILLAR
5.2
3204
DI(2)
318
L4
OR5474
CATERPILLAR
5.2
3204
PC
318
L4
OR5556
CATERPILLAR
18.0
3408
1099
V8
OR5556
CATERPILLAR
18.0
D8L
1099
V8
OR5560
CATERPILLAR
5.2
3204
DI
318
L4
OR5560
CATERPILLAR
5.2
3204
DI(2)
318
L4
OR5560
CATERPILLAR
5.2
3204
PC
318
L4
OR5561
CATERPILLAR
10.4
3208
636
V8
OR5561
CATERPILLAR
10.4
3208
636
V8
OR5561
CATERPILLAR
10.4
3208
636
V8
OR5561
CATERPILLAR
10.4
3208
TURBO
636
V8
OR6215
CATERPILLAR
51.8
3512
3158
V 12
OWG
NISSAN
2.2
No Model
Z22E
133
L4
82-83
P1
CHRYSLER
3.0
STEALTH
181
V6
93-95
P1
MITSUBISHI
3.0
3000GT
181
V6
91-94
P1
MITSUBISHI
3.0
3000GT
181
V6
91-92
P1
MITSUBISHI
3.0
3000GT
181
V6
93-98
P1428
ONAN
0.8
CCK
50
L2
P1428
ONAN
0.8
CCKA
50
L2
P1428
ONAN
0.8
CCKB
50
L2
P1554
ONAN
0.8
CCK
50
L2
P1554
ONAN
0.8
CCKA
50
L2
P1554
ONAN
0.8
CCKB
50
L2
PG38A
AUSTIN
1.2
No Model
73
L4
54-59
PG38A
AUSTIN
1.5
No Model
91
L4
54-61
PG38A
AUSTIN
1.6
No Model
99
L4
61-72
PG-38-A
MG
1.2
No Model
73
L4
54-61
PG-38-A
MG
1.5
No Model
91
L4
54-59
PG-38-A
MG
1.6
MARK II
99
L4
61-62
PG-38-A
MG
1.6
MARK II
99
L4
61-62
PROBE
MAZDA
2.2
626
F2
133
L4
88-92
R101223
JOHN DEERE
2.9
3029D
179
L3
R101223
JOHN DEERE
2.9
3029T
R115120
JOHN DEERE
12.5
R116076
JOHN DEERE
R116076
R117031-27
87-92
179
L3
6125
766
L6
6.8
6068HF475
414
L6
JOHN DEERE
6.8
6068TF275
414
L6
MERCEDES BENZ
5.6
560
117
338
V8
86-89
R117031-27
MERCEDES BENZ
5.6
560
M117
338
V8
88-91
R12
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
R1303R
JOHN DEERE
7.7
820
472
L2
50-59
R14
TOYOTA
1.2
COROLLA
3K-C
71
L4
70-79
R1800311401
MERCEDES BENZ
2.3
230
180
140
L6
64-69
R23517
JOHN DEERE
3.6
2030
219
L4
R23517
JOHN DEERE
3.6
454
219
L4
R26506
JOHN DEERE
7.6
4040 & 4240
466
L6
R26506
JOHN DEERE
7.6
6076
EARLY
466
L6
R26506
JOHN DEERE
7.6
6076
LATE
466
L6
R26506R
JOHN DEERE
7.6
4040 & 4240
466
L6
R26506R
JOHN DEERE
7.6
6076
EARLY
466
L6
R26506R
JOHN DEERE
7.6
6076
LATE
466
L6
R26530
JOHN DEERE
3.3
3010
201
L4
646
98-05

Casting
Manufacturer
Liter
Model
R26530R
JOHN DEERE
3.3
3010
201
L4
R26530R
JOHN DEERE
3.7
3020
227
L4
64-67
R26540
JOHN DEERE
6.6
4010
404
L6
67-76
R26540R
JOHN DEERE
4.2
No Model
254
L4
R26540R
JOHN DEERE
4.2
No Model
254
L4
R26540R
JOHN DEERE
4.4
3020
270
L4
R26540R
JOHN DEERE
4.4
No Model
270
L4
R26540R
JOHN DEERE
4.4
No Model
270
L4
R26550R
JOHN DEERE
4.9
4010
302
L6
R26550R
JOHN DEERE
5.0
303
303
L6
R26550R
JOHN DEERE
5.0
JD550
303
L6
R26550R
JOHN DEERE
5.6
4020
341
L6
R26550R
JOHN DEERE
5.6
No Model
341
L6
R26560
JOHN DEERE
6.2
4010
381
L6
R-26560
JOHN DEERE
6.6
4010
404
L6
R26560R
JOHN DEERE
6.2
4010
381
L6
R26560R
JOHN DEERE
6.6
4010
404
L6
67-76
R-26560R
JOHN DEERE
6.6
4010
404
L6
67-76
R340R
JOHN DEERE
6.8
R SERIES
416
L2
49-54
R35010R
JOHN DEERE
8.7
5010, 5020
531
L6
R35010R
JOHN DEERE
8.7
6030
531
L6
R36350R
JOHN DEERE
8.7
5010, 5020
531
L6
R36350R
JOHN DEERE
8.7
6030
531
L6
60-81
R36350R
JOHN DEERE
10.2
619
619
L6
68-81
R40570
JOHN DEERE
4.2
No Model
254
L4
R40570
JOHN DEERE
4.4
No Model
270
L4
R40570
JOHN DEERE
4.4
No Model
270
L4
R40570
JOHN DEERE
6.2
4010
381
L6
R-40570
JOHN DEERE
6.6
4010
404
L6
R40720
JOHN DEERE
3.9
No Model
241
L4
R40730
JOHN DEERE
5.9
2940
359
L6
R40730
JOHN DEERE
5.9
359T
359
L6
R40730
JOHN DEERE
5.9
4020
362
L6
R40740R
JOHN DEERE
6.2
4010
381
L6
R40740R
JOHN DEERE
6.6
4010
404
L6
R40740R
JOHN DEERE
6.6
4020
404
L6
R40740R
JOHN DEERE
6.6
4320
404
L6
R-40740R
JOHN DEERE
6.6
4010
404
L6
R4390R
JOHN DEERE
5.3
60
321
L2
R46498
JOHN DEERE
4.4
3020
270
L4
R5034700
JOHN DEERE
6.8
6068HF475
414
L6
R5034700
JOHN DEERE
6.8
6068TF275
414
L6
R5450
JOHN DEERE
4.5
2630
276
L4
R54501
JOHN DEERE
4.5
2155
276
L4
R54501
JOHN DEERE
4.5
2630
276
L4
R54501R
JOHN DEERE
4.5
2630
276
L4
R54619
JOHN DEERE
6.8
6068T
414
L6
R56919
JOHN DEERE
7.6
4040 & 4240
466
L6
R56919
JOHN DEERE
7.6
6076
EARLY
466
L6
R56919
JOHN DEERE
7.6
6076
LATE
466
L6
R56934
JOHN DEERE
7.6
4440, 4450, 4640
466
L6
R56934
JOHN DEERE
7.6
4650, 4850, 8440
466
L6
R56979
JOHN DEERE
7.6
4440, 4450, 4640
466
L6
R56979
JOHN DEERE
7.6
4650, 4850, 8440
466
L6
R56979R
JOHN DEERE
7.6
4040 & 4240
466
L6
R56979R
JOHN DEERE
7.6
4440, 4450, 4640
466
L6
R56979R
JOHN DEERE
7.6
4650, 4850, 8440
466
L6
R600C-500
CONTINENTAL
8.4
R513
513
L6
R600C-500
CONTINENTAL
9.4
R572
572
L6
647
VIN
D
D
D
T
CID Cyl
Year
67-76
60-81
67-76
67-76
67-76

Casting
Manufacturer
Liter
Model
VIN
R600C-500
CONTINENTAL
9.4
RD572
572
L6
R600C-500
CONTINENTAL
9.9
R602
602
L6
R600C-500
CONTINENTAL
9.9
V603
603
L8
R600C-500
CONTINENTAL
9.9
VD603
603
L8
R600C-500
CONTINENTAL
12.3
749
L6
R600C-500
CONTINENTAL
13.1
SD802
802
L6
R600C-500
CONTINENTAL
13.4
S820
820
L6
R600C-501
CONTINENTAL
8.4
R513
513
L6
R600C-501
CONTINENTAL
9.4
R572
572
L6
R600C-501
CONTINENTAL
9.4
RD572
572
L6
R600C-501
CONTINENTAL
9.9
R602
602
L6
R600C-501
CONTINENTAL
9.9
V603
603
L8
R600C-501
CONTINENTAL
9.9
VD603
603
L8
R600C-501
CONTINENTAL
12.3
749
L6
R600C-501
CONTINENTAL
13.1
SD802
802
L6
R600C-501
CONTINENTAL
13.4
S820
820
L6
R614R
JOHN DEERE
6.8
R SERIES
416
L2
R63451
JOHN DEERE
7.6
4440, 4450, 4640
466
L6
R63451
JOHN DEERE
7.6
4650, 4850, 8440
466
L6
R63451
JOHN DEERE
7.6
6466T
466
L6
R63478
JOHN DEERE
R6810310001
MERCEDES BENZ
R6E10310001
MERCEDES BENZ
R73021
JOHN DEERE
15.7
R81959
JOHN DEERE
3.9
239T
R81959
JOHN DEERE
3.9
2750
R851729
CHRYSLER
5.9
No Model
TRK
R87544A
JOHN DEERE
7.6
6076
R87544A
JOHN DEERE
7.6
R9028036
GM
2.0
R9028036
GM
R9028036
RD
VD
SD
RD
VD
SD
CID Cyl
Year
49-54
619
619
L6
68-81
1.7
M136
103
L4
53-61
1.8
No Model
108
L4
53-61
8850, 8955
955
V8
75-85
239
L4
239
L4
361
V8
EARLY
466
L6
6076
LATE
466
L6
No Model
122
L4
87-91
2.0
No Model
122
L4
88-91
GM
2.0
No Model
122
L4
87-90
R9028036
GM
2.0
No Model
122
L4
88-90
R9028036
GM
2.0
SUNBIRD
122
L4
90-95
R90280395
GM
2.0
No Model
122
L4
87-91
R90280395
GM
2.0
No Model
122
L4
88-91
R90280395
GM
2.0
No Model
122
L4
87-90
R90280395
GM
2.0
No Model
122
L4
88-90
R90280399
GM
2.0
No Model
122
L4
87-91
R90280399
GM
2.0
No Model
122
L4
88-91
R90280399
GM
2.0
No Model
122
L4
87-90
R90280399
GM
2.0
No Model
122
L4
88-90
R9028399
GM
2.0
SUNBIRD
122
L4
90-95
R979266
JOHN DEERE
3.9
4039D
239
L4
RD51261
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
RD51261
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
RD51261
JEEP
5.0
No Model
304
V8
70-79
RD51261
JEEP
5.9
No Model
360
V8
71-91
RD67703
CHRYSLER
4.2
No Model
258
L6
70-83
RD67703
CHRYSLER
4.2
No Model
258
L6
83-89
RD67703
CHRYSLER
4.2
No Model
C(2
258
L6
83-89
RD67703
JEEP
4.2
No Model
258
L6
71-77
RDJ1261
CHRYSLER
5.0
No Model
A/J
304
V8
70-79
RDJ1261
CHRYSLER
5.9
No Model
A/J
360
V8
70-79
RE-351-C
MINN MOLINE
3.0
No Model
186
L4
RE-351-D
MINN MOLINE
3.0
No Model
186
L4
RE-370
MINN MOLINE
3.4
335
206
L4
RE-370
MINN MOLINE
3.4
445
206
L4
RE-370
MINN MOLINE
3.9
No Model
236
L4
10.2
648
57-78

Casting
Manufacturer
Liter
Model
VIN
RE53203
JOHN DEERE
7.6
4440, 4450, 4640
466
L6
RE53203
JOHN DEERE
7.6
4650, 4850, 8440
466
L6
RE53203
JOHN DEERE
7.6
6076
LATE
466
L6
RE53204
JOHN DEERE
7.6
4440, 4450, 4640
466
L6
RE53204
JOHN DEERE
7.6
4650, 4850, 8440
466
L6
RFE 6AE
FORD
3.0
No Model
183
V6
86-90
RFF1AE6303AD
FORD
4.6
No Model
W, X
281
V8
91-05
RRY ENIGU
TRIUMPH
2.5
No Model
CF
152
L6
68-76
RST
VOLKSWAGEN
2.1
VANAGON
MV
129
H4
86-91
RT
OPEL
1.9
No Model
116
L4
67-75
S2
TOYOTA
2.2
CELICA
20R
134
L4
75-77
S2
TOYOTA
2.2
CELICA
20R
134
L4
78-80
S356E
FORD
1.1
VSG-411
67
L4
84-88
S5513
HILLMAN
1.2
No Model
71
L4
37-53
S5634
HILLMAN
1.3
No Model
77
L4
48-57
SD16
NAVISTAR
1.6
274
99
L3
SD16
NISSAN
1.6
SD-16
99
L3
SD260034
ALLIS CHALMERS
2.5
160
152
L3
SD260034
PERKINS
2.5
152
152
L3
SD260034
PERKINS
2.5
152
D(2)
152
L3
SD260034
PERKINS
2.5
152
D(3)
152
L3
SM
FORD
5.8
No Model
G,Q
351
V8
T13048T
JOHN DEERE
1.9
No Model
115
L4
T17150T
JOHN DEERE
2.5
No Model
155
L4
T17150T
JOHN DEERE
2.7
No Model
165
L4
T17885T
JOHN DEERE
1.9
No Model
115
L4
T182767
JOHN DEERE
3.5
65 & 95
217
L6
58-63
T182767
JOHN DEERE
3.6
217
217
L6
58-63
T182767
JOHN DEERE
3.6
217
217
L6
58-63
T20030T
JOHN DEERE
2.5
No Model
155
L4
T20030T
JOHN DEERE
2.7
No Model
165
L4
T23264
JOHN DEERE
3.5
65 & 95
217
L6
58-63
T23264
JOHN DEERE
3.6
217
217
L6
58-63
T23264
JOHN DEERE
3.6
217
217
L6
58-63
T23264T
JOHN DEERE
5.0
303
303
L6
T23264T
JOHN DEERE
5.0
JD550
303
L6
T23264T
JOHN DEERE
5.4
No Model
329
L6
T23264T
JOHN DEERE
5.9
2940
359
L6
T23264T
JOHN DEERE
5.9
2940
359
L6
T23264T
JOHN DEERE
5.9
359T
359
L6
T23266
JOHN DEERE
3.5
65 & 95
217
L6
58-63
T23266
JOHN DEERE
3.6
217
217
L6
58-63
T23266
JOHN DEERE
3.6
217
217
L6
58-63
T23266
JOHN DEERE
3.9
239T
239
L4
T23266
JOHN DEERE
3.9
2750
239
L4
T23266
JOHN DEERE
5.4
No Model
329
L6
T23266T
JOHN DEERE
5.4
4030
329
L6
T233266T
JOHN DEERE
5.4
544A
DT
329
L6
T23480T
JOHN DEERE
3.6
2020
219
L4
T23480T
JOHN DEERE
3.6
2020
219
L4
T23480T
JOHN DEERE
3.6
2030
219
L4
T23480T
JOHN DEERE
3.6
454
219
L4
T23480T
JOHN DEERE
5.4
4030
329
L6
T23483T
JOHN DEERE
3.1
186
186
L4
T23483T
JOHN DEERE
3.1
2020
186
L4
T23484T
JOHN DEERE
2.2
1020 TRACTOR
135
L3
T23488T
JOHN DEERE
2.5
No Model
155
L4
T23488T
JOHN DEERE
2.7
No Model
165
L4
T23516T
JOHN DEERE
2.5
820, 830 & 1020 TRACTORS
152
L3
649
CID Cyl
Year
75-82

Casting
Manufacturer
Liter
Model
T23517T
T23517T
JOHN DEERE
2.7
360 DOZER
164
L3
JOHN DEERE
3.6
2020
219
L4
T23517T
JOHN DEERE
3.6
2020
219
L4
T23517T
JOHN DEERE
3.6
2030
219
L4
T23517T
JOHN DEERE
3.6
454
219
L4
T23517T
JOHN DEERE
5.4
4030
329
L6
T2351C
JOHN DEERE
2.7
1520 TRACTOR
164
L3
T28743T
JOHN DEERE
3.6
2030
219
L4
T290
DEUTZ
1.9
F2L912/W
115
L2
T371C-300
CONTINENTAL
6.6
No Model
405
L6
T3A
CHRYSLER
3.0
No Model
181
V6
87-95
T3A
CHRYSLER
3.0
No Model
181
V6
96-99
T3A
CHRYSLER
3.0
No Model
181
V6
91-92
T3A
CHRYSLER
3.0
No Model
181
V6
91-92
T3A
CHRYSLER
3.0
No Model
181
V6
90-92
T3A
CHRYSLER
3.0
No Model
181
V6
91-92
T3A
CHRYSLER
3.0
No Model
181
V6
92
T3A
CHRYSLER
3.0
STEALTH
181
V6
93-95
T3A
HYUNDAI
3.0
SONATA
183
V6
89-98
T3A
MITSUBISHI
3.0
DIMANTE
181
V6
93-96
T3A
MITSUBISHI
3.0
GALANT
181
V6
88-92
T3A
MITSUBISHI
3.0
MONTERO
181
V6
95-03
T3A
MITSUBISHI
3.0
No Model
181
V6
87-91
T3B
CHRYSLER
3.0
No Model
181
V6
87-95
T3B
CHRYSLER
3.0
No Model
181
V6
96-99
T3B
CHRYSLER
3.0
No Model
181
V6
91-92
T3B
CHRYSLER
3.0
No Model
181
V6
91-92
T3B
CHRYSLER
3.0
No Model
181
V6
90-92
T3B
CHRYSLER
3.0
STEALTH
181
V6
93-95
T3B
HYUNDAI
3.0
SONATA
183
V6
89-98
T3B
MITSUBISHI
3.0
DIMANTE
181
V6
93-96
T3B
MITSUBISHI
3.0
GALANT
181
V6
88-92
T3B
MITSUBISHI
3.0
No Model
181
V6
87-91
T3C
CHRYSLER
3.0
No Model
181
V6
91-92
T3C
CHRYSLER
3.0
No Model
181
V6
91-92
T3C
CHRYSLER
3.0
No Model
181
V6
90-92
T3C
CHRYSLER
3.0
STEALTH
181
V6
93-95
T3C
HYUNDAI
3.0
SONATA
183
V6
89-98
T3C
MITSUBISHI
3.0
GALANT
181
V6
88-92
T3C
MITSUBISHI
3.0
No Model
181
V6
87-91
T3D
CHRYSLER
3.0
No Model
181
V6
87-95
T3D
CHRYSLER
3.0
No Model
181
V6
96-99
T3D
CHRYSLER
3.0
No Model
181
V6
90-92
T3D
HYUNDAI
3.0
SONATA
183
V6
89-98
T3D
MITSUBISHI
3.0
DIMANTE
181
V6
93-96
T3D
MITSUBISHI
3.0
GALANT
181
V6
88-92
T3D
MITSUBISHI
3.0
MONTERO
181
V6
95-03
T3E
CHRYSLER
3.0
No Model
181
V6
87-95
T3E
CHRYSLER
3.0
No Model
181
V6
96-99
T3E
CHRYSLER
3.0
No Model
181
V6
90-92
T3E
CHRYSLER
3.0
STEALTH
181
V6
93-95
T3E
HYUNDAI
3.0
SONATA
183
V6
89-98
T3E
MITSUBISHI
3.0
DIMANTE
181
V6
93-96
T3E
MITSUBISHI
3.0
GALANT
181
V6
88-92
T3E
MITSUBISHI
3.0
No Model
181
V6
87-91
T3F
CHRYSLER
3.0
No Model
181
V6
87-95
T3F
CHRYSLER
3.0
No Model
181
V6
91-92
T3F
CHRYSLER
3.0
No Model
181
V6
91-92
T3F
CHRYSLER
3.0
No Model
181
V6
90-92
650
VIN
CID Cyl
Year

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
T3F
CHRYSLER
3.0
STEALTH
T3F
HYUNDAI
3.0
SONATA
181
V6
93-95
183
V6
T3F
MITSUBISHI
3.0
GALANT
89-98
181
V6
T3F
MITSUBISHI
3.0
88-92
MONTERO
181
V6
T3F
MITSUBISHI
95-03
3.0
No Model
181
V6
T3G
87-91
MITSUBISHI
3.0
MONTERO
181
V6
95-03
T3H
CHRYSLER
3.0
No Model
181
V6
90-92
T3H
CHRYSLER
3.0
STEALTH
181
V6
93-95
T3L
CHRYSLER
3.0
No Model
181
V6
87-95
T3L
CHRYSLER
3.0
No Model
181
V6
96-99
T3L
CHRYSLER
3.0
No Model
181
V6
90-92
T3L
HYUNDAI
3.0
SONATA
183
V6
89-98
T3L
MITSUBISHI
3.0
DIMANTE
181
V6
93-96
T3L
MITSUBISHI
3.0
GALANT
181
V6
88-92
T3L
MITSUBISHI
3.0
MONTERO
181
V6
95-03
T3N
CHRYSLER
3.0
No Model
181
V6
90-92
T3N
CHRYSLER
3.0
STEALTH
181
V6
93-95
T427C-300
CONTINENTAL
6.6
No Model
405
L6
T427C-301
CONTINENTAL
7.0
No Model
TD
427
L6
T427C-301
CONTINENTAL
7.0
T427
B&T
427
L6
T427C-301
CONTINENTAL
8.2
U501
501
L6
T427C-305
CONTINENTAL
7.0
No Model
TD
427
L6
T427C-305
CONTINENTAL
7.0
T427
B&T
427
L6
T427C-305
CONTINENTAL
8.2
U501
501
L6
T499T
JOHN DEERE
2.4
2010 & HA SERIES
145
L4
58-63
T632T
JOHN DEERE
2.4
2010 & HA SERIES
145
L4
58-63
T632T
JOHN DEERE
2.5
No Model
155
L4
T632T
JOHN DEERE
2.7
No Model
165
L4
T633T
JOHN DEERE
3.5
65 & 95
217
L6
58-63
T633T
JOHN DEERE
3.6
217
217
L6
58-63
T633T
JOHN DEERE
3.6
217
217
L6
58-63
T633T
JOHN DEERE
4.1
No Model
248
L6
TDC
CHRYSLER
3.0
STEALTH
181
V6
93-95
TDC
MITSUBISHI
3.0
3000GT
181
V6
91-94
TDC
MITSUBISHI
3.0
3000GT
181
V6
91-92
TDC
MITSUBISHI
3.0
3000GT
181
V6
93-98
TDD
CHRYSLER
3.0
No Model
181
V6
90-92
TDD
CHRYSLER
3.0
STEALTH
181
V6
93-95
TM27-2-600
CONTINENTAL
2.7
TM27
TM
164
L4
TM27C-600
CONTINENTAL
2.7
TM27
TM
164
L4
TM-BA
FORD
2.9
BRONCO
177
V6
86-92
TM-BA
FORD
2.9
No Model
177
V6
87-90
TMD20C-300
CONTINENTAL
2.0
TM20
TM
122
L3
TMD27C-300
CONTINENTAL
2.0
TMD20
TMD
122
L3
TMD27C-300
CONTINENTAL
2.7
TMD27
TMD
164
L4
U3086
ALLIS CHALMERS
3.3
HD4
200
L4
U3086
ALLIS CHALMERS
3.3
WC & WF
WC
201
L4
U3086
ALLIS CHALMERS
3.3
WD
WD
201
L4
U3186
ALLIS CHALMERS
3.3
HD4
200
L4
U3186
ALLIS CHALMERS
3.3
WC & WF
WC
201
L4
U3186
ALLIS CHALMERS
3.3
WD
WD
201
L4
U3194
ALLIS CHALMERS
3.3
HD4
200
L4
U3194
ALLIS CHALMERS
3.3
WC & WF
WC
201
L4
U3194
ALLIS CHALMERS
3.3
WD
WD
201
L4
U3967
ALLIS CHALMERS
2.3
No Model
142
L4
U3967
DDC
4.7
4-71 2VALVE
284
L4
U3967
DDC
4.7
4-71 4VALVE
284
L4
U3967
DDC
4.7
4-71 CROSS-HEAD
284
L4
U3967
DDC
4.7
4-71E
284
L4
651

Casting
Manufacturer
Liter
U3967
DDC
4.7
4-71M
284
L4
U3967
DDC
4.7
4-71N
284
L4
U3967
DDC
4.7
4-71T
284
L4
U3986
ALLIS CHALMERS
0.4
25
25
L4
U3986
ALLIS CHALMERS
3.3
HD4
200
L4
U3986
ALLIS CHALMERS
3.3
WC & WF
WC
201
L4
U3986
ALLIS CHALMERS
3.3
WD
WD
201
L4
U-3986
ALLIS CHALMERS
3.7
D17
226
L4
54-57
U60
NISSAN
2.0
510
L20B
119
L4
74-79
U60
NISSAN
2.0
510
Z20S
119
L4
81
U60
NISSAN
2.0
No Model
L20B
119
L4
80-80
U6040
NISSAN
2.0
510
L20B
119
L4
74-79
U6040
NISSAN
2.0
No Model
L20B
119
L4
80-80
U6040
NISSAN
2.0
No Model
Z20
119
L4
84-86
U-9509-B140
SUPERIOR
3064
L6
U975
FORD
2.0
COURIER
122
L4
79-80
U975
FORD
2.0
No Model
122
L4
81-82
U975
MAZDA
2.0
626
FE
122
L4
83-87
U975
MAZDA
2.0
B2000
FE(1)
122
L4
83-88
UU
OPEL
1.2
No Model
74
L4
61-62
UU
OPEL
1.5
No Model
90
L4
59-62
UU
OPEL
1.7
No Model
104
L4
62-65
V35
HYUNDAI
3.5
XG 350
213
V6
02-05
V5200
CASE
2.0
VA & VAC
124
L4
V5200
CASE
2.0
VA & VAE
124
L4
V-5200
CASE
2.0
VA & VAE
124
L4
V520D
CASE
2.0
VA & VAC
124
L4
V520D
CASE
2.0
VA & VAE
124
L4
VG30
NISSAN
3.0
200SX
VG30
181
V6
84-86
VG30
NISSAN
3.0
300ZX
VG30
181
V6
90-96
VG30
NISSAN
3.0
MAXIMA
VG30
181
V6
84-87
VG30
NISSAN
3.0
MAXIMA
VG30
181
V6
87-95
VG30
NISSAN
3.0
MAXIMA
VG30E
181
V6
87-97
VG30
NISSAN
3.0
No Model
181
V6
90-96
VT3201
CASE
2.0
VA & VAC
124
L4
VT3201
CASE
2.0
VA & VAE
124
L4
VT-3201
CASE
2.0
VA & VAE
124
L4
VT5200
CASE
2.0
VA & VAC
124
L4
W2157
TRIUMPH
1.5
No Model
FH
91
L4
73-80
W2157
TRIUMPH
1.5
No Model
FM
91
L4
73-80
W3140
NISSAN
2.4
MAXIMA
L24E
146
L6
81-84
WGS
FORD
5.8
No Model
351
V8
83-91
WGS
FORD
5.8
No Model
351
V8
84-97
FORD
4.0
No Model
244
V6
90-02
MAZDA
4.0
B4000
244
V6
90-98
X153
GM
3.4
CAMARO
207
V6
93-95
X153
GM
3.4
CUTLASS
207
V6
95-97
X153
GM
3.4
GRAND AM
204
V6
96-04
X153
GM
3.4
No Model
207
V6
91-95
X20
GM
1.6
TRACKER
97
L4
89-96
X3501
HERCULES
2.7
G1600
163
L4
XBRO-1145
FORD
2.0
RANGER
122
L4
XBRO-1145
FORD
2.3
LSG423
140
L4
XBRO-1145
FORD
2.3
No Model
140
L4
81-82
XBRO-1145
FORD
2.3
No Model
140
L4
80-84
XBRO-1145
FORD
2.3
No Model
140
L4
89-98
XBRO-1145
FORD
2.3
No Model
140
L4
76-80
XBRO-1145
FORD
2.3
No Model
140
L4
91-93
XBRO-1145
FORD
2.3
No Model
140
L4
80-87
50.2
Model
VIN
6G-510
652
CID Cyl
Year
84-85

Casting
Manufacturer
Liter
Model
VIN
CID Cyl
Year
XBRO-1145
FORD
2.3
No Model
XBRO-1145
FORD
2.3
No Model
140
L4
79-80
140
L4
XBRO-1145
FORD
2.3
No Model
74-75
140
L4
XC38W-33
SIMCA
1.1
76-79
No Model
66
L4
XC38W-33
SIMCA
60-65
1.3
No Model
79
L4
Y112C-300
60-76
CONTINENTAL
1.1
Y69
69
L4
Y112C-300
CONTINENTAL
1.5
91
91
L4
Y112C-300
CONTINENTAL
1.8
112
112
L4
Y400C-213
CONTINENTAL
1.1
Y69
69
L4
Y400C-213
CONTINENTAL
1.5
91
91
L4
Y400C-213
CONTINENTAL
1.8
112
112
L4
Y400C-216
CONTINENTAL
1.1
Y69
69
L4
Y400C-216
CONTINENTAL
1.5
91
91
L4
Y400C-216
CONTINENTAL
1.8
112
112
L4
Y400C-225
CONTINENTAL
1.1
Y69
69
L4
Y400C-225
CONTINENTAL
1.5
91
91
L4
Y400C-226
CONTINENTAL
1.1
Y69
69
L4
Y400C-226
CONTINENTAL
1.5
91
91
L4
Y400C-226
CONTINENTAL
1.8
112
112
L4
Y400C-334
CONTINENTAL
1.1
Y69
69
L4
Y400C-334
CONTINENTAL
1.5
91
91
L4
Y400C-334
CONTINENTAL
1.8
112
112
L4
Y400C-335
CONTINENTAL
1.1
Y69
69
L4
Y400C-335
CONTINENTAL
1.5
91
91
L4
Y400C-335
CONTINENTAL
1.8
112
112
L4
Y400C-338
CONTINENTAL
1.1
Y69
69
L4
Y400C-338
CONTINENTAL
1.5
91
91
L4
Y400C-338
CONTINENTAL
1.8
112
112
L4
Y400C-508
CONTINENTAL
1.1
Y69
69
L4
Y400C-508
CONTINENTAL
1.5
91
91
L4
Y400C-508
CONTINENTAL
1.8
112
112
L4
Y400C-511D
CONTINENTAL
1.1
Y69
69
L4
Y400C-511D
CONTINENTAL
1.5
91
91
L4
Y400C-511D
CONTINENTAL
1.8
112
112
L4
Z-120-500
CONTINENTAL
2.0
Z120
120
L4
Z-129C-205
CONTINENTAL
2.1
Z129
129
L4
Z-129C-205
CONTINENTAL
2.2
Z134
134
L4
Z-129C-205
MASSEY FERGUSON
2.1
TO30
129
L4
Z-129C-205
MASSEY FERGUSON
2.2
TO35
134
L4
Z-129C-500
CONTINENTAL
2.1
Z129
129
L4
Z-129C-500
CONTINENTAL
2.2
Z134
134
L4
Z-129C-500
MASSEY FERGUSON
2.1
TO30
129
L4
Z-129C-500
MASSEY FERGUSON
2.2
TO35
134
L4
Z134C-500
CONTINENTAL
2.4
Z145
145
L4
Z134C-500
MASSEY FERGUSON
2.4
MF245
145
L4
Z-134C-500
CONTINENTAL
2.1
Z129
129
L4
Z-134C-500
CONTINENTAL
2.2
Z134
134
L4
Z-134C-500
MASSEY FERGUSON
2.1
TO30
129
L4
Z-134C-500
MASSEY FERGUSON
2.2
TO35
134
L4
Z21
TOYOTA
2.0
VAN
122
L4
3Y-EC
653
84-85
654
655
656

Manueal de Cigüeñal

Transféré par

Informations du document

Copyright

Formats disponibles

Partager ce document

Partager ou intégrer le document

Options de partage

Avez-vous trouvé ce document utile ?

Ce contenu est-il inapproprié ?

Droits d'auteur :

Formats disponibles

Manueal de Cigüeñal

Transféré par

Droits d'auteur :

Formats disponibles

Crankshaft Manual

Compiled & edited

Copyright AERA 2006

AERA - Engine Builders Association

The Crankshaft Manual

Machinists Shop Data

Engine and/or Equipment Specifications

Quick Cubic Inch Displacement & Compression

Abbreviations & Symbol Marks

Modo de Empleo en Espaol

Clculo Rpido del Desplazamiento

Crankshaft Applications by Casting Number

MACHINISTS SHOP DATA

Note: Do not attempt to use as an interchange manual.

ENGINE AND/OR EQUIPMENT SPECIFICATIONS

Quick Cubic Inch Displacement

Quick Check Engine Compression Ratios

Swept Volume for one cylinder in ccs.

Clearance Volume for one cylinder in ccs.

Head Volume (published or measured in ccs)

Effective Dome Volume (published or measured in ccs)

Deck Volume clearance (piston to deck) in ccs

Gasket Volume in ccs

Abbreviations & Symbols

air injection/thermactor ports

Informacin para Talleres de Rectificado

Especificaciones de Motores y/o Equipo

CLCULO RPIDO DEL DESPLAZAMIENTO EN PULGADAS CBICAS

CLCULO RPIDO DE LA RELACIN DE COMPRESIN

Volumen de Barrido (cilindrada para un cilindro en c.c. ).

Volumen de la Distancia Libre del cilindro en c.c.

Volumen de la Cabeza (publicado o medido en c.c.)

Volumen Efectivo del Domo (publicado o medido en c.c.)

Volumen del (Techo) Tope, (espacio del pistn al tope en c.c)

Volumen de la Junta (Empaque) en c.c.

Todas las medidas de volumen de compresin son en centmetros

Abbreviations & Symbols

Air Injection/Thermactor Parts / Inyeccin de Aire / Entrada del Termactor

Mack ................................................................................................................. 324-327

Crankshaft Application Section

Stroke: 3.543" (89.992 MM)

Stroke: 3.4330" (87.198 MM)

3.1890-3.1900" (81.000-81.020 MM)

Stroke: 3.504" (89.002 MM)

3.1890-3.1898" (81.001-81.021 MM)

Stroke: 3.3858" (86.000 MM)

3.1890" (81.001 MM)

3.1890" (81.001 MM)

Stroke: 3.430" (87.200 MM)

3.1890-3.1898" (81.001-81.021 MM)

Stroke: 3.5039" (88.999 MM)

3.3858-3.3866" (86.000-86.020 MM)

Stroke: 3.402" (86.411 MM)

2.9528-2.9535" (75.001-75.019 MM)

Stroke: 3.189" (81.001 MM)

Stroke: 3.400" (86.36 MM)

3.346" (84.988 MM)

Crankshaft Application Section

Stroke: 2.953" (75.006 MM)

3.3070" (83.998 MM)

DOHC, MFI, STERLING

Stroke: 2.9528" (75.000 MM)

Stroke: 2.874" (73. MM)

3.5433-3.5441" (90.-90.02 MM)