Académique Documents
Professionnel Documents
Culture Documents
1 When CNC cutting machine is equipped with automatic THC, 6 wires of the
cable need to be connected between the CNC cutting machine and the plasma
power source.
According to the
CNC START
DIV FINISH
12
DIV FINISH
14
DIV ARC+
DIV ARC-
J27
J29
2. When CNC cutting machine is not equipped with automatic THC, 4 wires of the
cable need to be connected between the CNC cutting machine and the plasma
power source.
According to the
CNC START
DIV FINISH
12
DIV FINISH
14
Type
Note
CNC START
output
CNC START
DIV ARC+
Input
DIV ARC-
300VDC.
DIV FINISH
Input
DIV FINISH
CNC
machine,
to
give
the
Note
1. The portable CNC cutting machine must be well grounded separately and the
grounding resistance should be less than 3.
2. The arc voltage of the plasma shall be processed by the secondary rectification,
normally, its value should be 50VDC~300VDC.
3. Any false connection by user may cause machine itself damage or even cause
injury to persons.
4. Any damage to the machine due to users false connection shall not be included
in its warranty. Any injury to persons due to users false connection shall not be
the responsibility of our side.