Vous êtes sur la page 1sur 2

1)wht do u mean by load in circuit.

wht dp u mean by inductive


load

2) what is a DLC?[just dont reply its a Dual loop controller!] Plz do Explain the
advantage of DLC over PLC?
3) In a ordinary plug can we hold the earth in hane and connect the circuit to supply?will
we get a shock?
4) differance b|w ground, neutral&earth
5) why is the vector group analysis done in transformer tests
What is meant by line losses, how do you prevent the losses?
Answer Line loss means loss due to I2R effect.
# 1 That is the heating
loss in the transmission line. It is equal
to Current
square multiply by resistance of total
line.
It can be reduced by reducing the
resistance of the line
ie. by increasing the diameter of wire. Or
by sending the
same wattage, reduce current and
proportionally increase
the voltage.

What is the ohms law?


What is meant by transformer, why it should be
used, with out that equipment what happens if we
transformed the supply?
What is meant by Resonance what are the different
types of resonance and what are uses of them?
What loads the lagging and leading effects comes
in a circuit?
What meant by lagging and leading? When if they
are occurred what preventive methods should be
taken?
What are the tests to be taken on a transformer and
generator?
What are the starting currents of different motors
and also what are the running currents, and idle
currents?
Why a starter is used for a motor?

1
1
2
1
0
0
1

83
70
73
45
24
15
80

Do you know how to joint the H.T and L.T


Cables?
How you take care of a motor from over loading
and what are the different overloading ratings of
different motors?
Do you know the faults occurs generally in motors
and how to rectify them?

0
0
0

Do you know the overhauling of a motor?

Do you know the alignment of a motor?

What accessories required to give the motor with


given circuits and do you know the ratings of those
accessories?
Do you know how to connect a motor of different
H.Ps?
Do you know how to maintain a generator, if so
what are those maintenances?

0
0

20
13
8
8
11
11
8

Vous aimerez peut-être aussi