Académique Documents
Professionnel Documents
Culture Documents
Cooling
Body
STANDARD:
Non-structural fiberglass composite
panels: Nose cone & cover; Engine cover
air box; Screen; Body tub.
OPTION: Also available in carbon fiber
Seating
STANDARD:
Composite seat unit
5 position adjustment
Four point harness seat belts
OPTIONS: Independent Recaro seats
Six point harness seat belts
Suspension
STANDARD:
Double unequal length wishbones
Outboard adjustable rod ends
Inboard rubber bushes
Lightweight fabricated uprights
Adjustable suspension push rods
Aluminum bell cranks
Adjustable inboard dampers
High grade alloy steel coil springs
OPTIONS: Track & Race suspension
packages available
Steering
STANDARD:
Rack and pinion cast alloy steering rack
Adjustable inboard & outboard rod ends
300mm suede covered steering wheel
OPTION: High ratio steering rack
Braking
STANDARD:
Floating PBR calipers front and rear
10.3" front ventilated rotor
9.4" rear ventilated rotor
Tilton aluminum racing pedal box
Twin master cylinders
Adjustable front/rear brake bias
OPTIONS: Sport, Track & Race brake
packages available
Wheel/Tire
STANDARD:
Front: 6Jx15 11-spoke wheels,
195/50R15
Rear: 7.5Jx16 11-spoke wheels,
225/40R16
OPTIONS: Other wheel & tire packages
available
Gearbox
5 Speed Close ratio & reverse
Aluminum alloy casing
Hydraulic clutch
Engine
STANDARD:
GM Ecotec 4 Cylinder
Aluminum alloy block, cylinder head,
Chain drive DOHC 4 valves per cylinder
Power: 140 BHP @ 5200 rpm
Torque: 196Nm @ 4100 rpm
Cut off: 5600 rpm
OPTIONS: Supercharging to
205bhp; 230bhp; 245bhp; 300bhp
Fuel System
Indirect multi-port fuel injection
Continuous flow in-tank pump
9.7 U.S. gallons aluminum fuel tank
lnduction
Ram air box system
ITG foam air filter
Exhaust
STANDARD:
Fabricated exhaust manifold
High level fabricated silencer
OPTIONS: Stainless Steel & Ceramic
exhaust systems available
Dimensions
Length: 11 3
Track (front and rear): 5 3
Height: 3 11
Wheelbase: 7 8
Width: 5 11
Weight - 1325lbs
Ariel Atom
Mark 2