Am25LS241°Am54LS/74LS241
Am25LS244°Am54LS/74LS244
Octal Three-State Buffers
DISTINCTIVE CHARACTERISTICS
‘Three-state outputs drive bus lines directly
Hysteresis at inputs improve noise margin
PNP inputs reduce D.C. loading on bus lines
Data-to-output propagation delay times ~ 18ns MAX
Enable-to-output — 30ns MAX.
‘Am25LS241 and 244 specified at 48mA output current
20 pin hermetic and molded DIP packages
100% product assurance testing to MIL-STD-883
requirements
ee ceceee
FUNCTIONAL DESCRIPTION
The 'LS241 and ‘LS244 are octal buffers fabricated using
advanced low-power Schottky technology. The 20-pin peck-
lage provides improved printed circuit board density for use
In memory address and clock driver applications.
‘Three-state outputs are provided to drive bus lines directly.
‘The Am25LS241 and Am™25LS244 are specified at 48mA and
24mA output sink current, while the AmB4LS/74LS241 and
‘AmS4LSi74LS244 are guaranteed at 12mA over the military
rangeand24mA over the commercial range. Four buffers are
‘enabled from one common line and the other four from @
second enable line.
‘The ’LS241 has enable inputs of opposite polarity to allow
Ube as a transceiver without overlap. The ’LS244 enables are
of similar polarity for use as a unidirectional buffer in which
both halves are enabled simultaneous.
Improved noise rejection and high fan-out are provided by
input hysteresis and low current PNP inputs.
Tey
we I
‘ouTPUTE. [inure [outro
A oh. ot. FF
le (elie eee
Note: All devices hove input nvsteres
>
CONNECTION DIAGRAMS
Top Views
aah vee we [v0
E20 me bs
ape mc wb
> pee woe wm
on “EO mde, “pe
te oe wo Efe fas
fee n> wba
pfs mde sf
atin mtls afm
Das cot} fas
— Note: Pin 1 is marked for orientation J
Logic symBoLs
Yoo = Fin 3
cet 37 9 2 GND=Fint
242.Am25LS/S4LS/74LS241/244
Am25LS241-Am25LS244
ELECTRICAL CHARACTERISTICS
‘The Following Conditions Apply Unless Otherwise Specified:
COML —Ta=O'Ct0 +70 Veg = SOV= 5% (MIN. = 475V MAX. = 525V)
MIL Ty = ~55°C to +125°C Veg = BOV = 10% (MIN. = A50V MAX. = 5.50V)
DC CHARACTERISTICS OVER OPERATING RANGE
Typ.
(Noto 2) Max.
Parameters Deseipton Test Conditions Note) in, Unies
T Veo = MIN, Vig = 200
: 24] 3a
tare ma, SMa
Vou | High-Level Guiput Voage Veo = MIN. | MIL. toy = —12mA 7 os
van 0s | eoHrt'ig = Tena [20
Allg, = 12mA ~ 025 04
Vou | Lowe! ouput Votage Vee= Mn. [aes pana a5 —[ 05 —| von
Com = ain a8
aed Wout
Vin | Mehta npur Vonage Sena apo 20 vor
‘com 08 |
Va | owtove pat vounge PS La
Wa — par Coma Vora Weg = RS aR Ss [a
Hysteresis (Vr, — Vr) Vee = MIN. 02 04 Volts |
‘Off State Output Current, | vo-
fozn High Level Voltage Applied Vo =27V | 2 a
Ottis Guu Core 7
|_ loz | Low-Level Voltage Applied nMax. | Yo a
inet Coren at Masi : 7
[eat arent Veo = MAX. Vv = 7.07 on | ma
Tig | Waircval pt Caren Bayt Vos = WAR = EV = [aa
Te Low-Level Input Current Veo = MAX. Vi. = 0.4V =200 A
Tgg | SR Ge Out Curent We 37 Ves = MA 7% sas [ma
ft Outs HOR als
Vee = MAX.
tcc | swwetrcunen | Yoe=MA% At oapsLOW za] ma
| ina on Cu wz reaps |
Note: . For conditions shown as MIN. or MAX., use the appropriate value spcifiad under recommended operating cond
2. Ail sypieal valu are Veg = 5.0V, Ta = 25°C
3, Not more than one output should be shorted a 9 time, and duretion of the short-circuit should not exceed one second.
JAXIMUM RATINGS above which the useful life may be impaired
torage Temperature
55°C to 112
BVt0#70V
Tae Veg max
‘emperature (Ambient) Under Bias
ply Voiage to Ground Potential
XC Voltage Appia o Outputs for HIGH Output Sate
IC Input Voltage
1C Output Current
'C Input Current
243
~0.5V to +7.0V
T50mA
T30mA to 15 OMA‘Am25LS/S4LS/74LS241/244
AmS4LS/74LS241+AmS54LS/74LS244
ELECTRICAL CHARACTERISTICS
‘The Following Conditions Apply Unless Otherwise Specified:
COML Ta OCI +70 Voc = SOV 5 (MIN, = 478V MAK. = 8260)
MIL Tq= -S5Ct0 +1251 Voq = 5OV = 105 (MIN, = 450V. MAX, = SOV)
DC CHARACTERISTICS OVER OPERATING RANGE
Tp.
Parameters Daseription Test Conditions Note 1) Min, _(Note2) Max. Units
Veo = MIN. Vig = 20¥ T
za] 3a
low = —30mA, Yj = VMAX,
Vou | High-Level Output Voltage sO TS ee Fa = oh
Vy = 0.5V COMI, Ion= —1SmA | 20
— ms All, lo. = 12mA 025 oa
ow-Lovel Output Vane Veo = [A i Vote
eeu eee foc = MIN COM'L Tou = 24mA 0.36 os
7 aes Gasranieed input logical HIGH as
High-Level Input Voltage eae 20 Vol
"input Von com — .
ch Input Votage { ahs
Vi inoue vonwse 98 | Van
Vix, Input Clamp Voltage Vec = MIN. hy = 18m i =1.5 | Volts
a ry - Ved Veo = MN oz} 0a Woks
Output Curent 1
‘oz High Level Voltage Applied Veo = MAX. Lad
i ‘Off-State Output Current, Mea 7 208 ca
fox Low-Level Voltage Applied ee | a
Input Carant ot Meximum > a
gee | eet cen Veo = MAK. Vj = 70¥ on | ma
i | RighLovel input Curent Any input | Wee = MAX, Vig = 277 [A
[i Low-Level input Current Vec = MAX. Vi =700 | nk
ee a =25 ma
Veo = Max, | Al Outputs AGH a |
tee | Supply currant | oe = MY w]e] oma
| | Seeseaneteaeat (toutes se |
ows} For corions shown a IN. or WAX. he approrata valu pacis unde ecommended operating codons
2. All typical values ae Veo
SOV, Ta -25°C
2, Not mare than ane output should be shorted ata time, and Gurstion of he short-circuit should not exceed one sucond.
“us2a1
Die siZ€ 056" x 088"
Metallization and Pad Layouts
244
us2aa
DIE SIZE 056" x 9897‘SWITCHING CHARACTERISTICS
‘Am25LS/54LS/74LS241/244
(Tq = ¥25°C, Voc = 5.0V)
“Amz5L5241 ‘AmpaLsi7eisze1
‘AmzsLszea ‘Amsatsi7aiszes
Test Conditions
rameters Description Min. Typ. Max. | Min. Typ. Mex. | Units INotee 1-8)
‘i Propagation Daley Tine,
i —_| Lowsetigh-Lavel Output em wl edes
Tom. | Propagation Delay Time, t i c= A508
Ht | HightoLow-Love Output Bie ziteis R= earn
Tex] Output Enable Tine to Low Laval 3 [ae
ezn | Output Enable Time to High Level” 15 ee
teuz | Output Disable Time from Low Level 16 | 3 a
toxz | Output Disable Time from High Leva 10] Loe fe [ne] = 70
Am25LS ONLY ;
‘Am25L8 COM'L ‘Am26LS MIL
‘SWITCHING CHARACTERISTICS
OVER OPERATING RANGE’ Ta= ocr +70 | T= -S6'C to +125°C
Veo =5:0V 25% | Voc = 5.0V =10%
Parameters Description Min. Me Min. __Max._| Units Test Conditions
Propagation Delay Tr T
tour | Lowe High-Level Output Lg 2 zs
Propagation Delay Time, - we] cee AO
‘nt igh toLow-Lovel Ouput ere BE et
Output Enable Time to Low Level a ~ ap
‘Guinat Enable Tie to High Level 3 a7 “te
‘uz | Output Disabie Time ror Low Level 3 36 ne] GL» Ser
‘ruz | Ouipa Beabe Tine rom Figh Level 2 2 A. = 6670
AC perormance over the oprtingtemperture rage guarantee by vesting dtinadin Group A, Subgroup 9
LOAD CIRCUIT FOR VOLTAGE WAVEFORMS
THREE-STATE OUTPUTS ENABLE AND DISABLE TIMES, THREE-STATE OUTPUTS
aes = = oe |
Note: is for an output wit internal conditions such thet th output is low excapt whan dissbed by the output contol
is outputs high except when diebled by the output contol
3 Inthe ecorples above, the prose ratlonships between inputs and ostputs have beer chowen arn
‘ or chareiaisiee PAR =" Mn, Zquy = Shy = Is, = Ore
$ ing tpn and py, switches Sy and Sy are closed
245