Académique Documents
Professionnel Documents
Culture Documents
Regenerating model.
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <3.0000>:
Command:
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: _u LINE GROUP
Command:
Command:
Command: _line
Specify first point:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command: _u ELLIPSE
Command: _u ELLIPSE
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _u LINE GROUP
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]: _u
Requires numeric distance, second point, or option keyword.
Specify distance to other axis or [Rotation]: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: EL
ELLIPSE
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: el
ELLIPSE
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]: *Cancel*
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command: *Cancel*
Command: _u ELLIPSE
Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 ELLIPSE
Everything has been redone
Command: _u ELLIPSE
Command:
Command:
Command: _mredo
Enter number of actions or [All/Last]: 1 ELLIPSE
Everything has been redone
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: *Cancel*
Command:
Command: _.erase 1 found
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]: *Cancel*
Command: EL
ELLIPSE
Command: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: EL
ELLIPSE
Specify axis endpoint of ellipse or [Arc/Center]: a
Specify axis endpoint of elliptical arc or [Center]:
Specify other endpoint of axis:
Specify distance to other axis or [Rotation]:
Specify start angle or [Parameter]:
Specify end angle or [Parameter/Included angle]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: <Osnap on>
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command: *Cancel*
Command: _u DROPGEOM GROUP
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: `*Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _u Grip Edit
Command:
Command:
Command: _arc
Specify start point of arc or [Center]:
Specify second point of arc or [Center/End]:
Specify end point of arc: *Invalid*
Command:
Command:
Command: _arc
Specify start point of arc or [Center]: