Spherical roller bearings
Spherical roller bearings have two rows of
rollers with a common sphered raceway in the
outer ring and two inner ring raceways inclined
at an angle to the bearing axis (> fig. 1). This
gives them an attractive combination of design
features, making them irreplaceable in many
demanding applications. They are self-aligning
and consequently insensitive to misalignment
of the shaft relative to the housing and to shaft
deflection or bending.
SKF spherical roller bearings are leading in
design and can, in addition to heavy radial loads,
accommodate heavy axial loads acting in both
directions.
Standard bearings
‘The standard range of SKF spherical roller bear- CA
ings comprises
* open bearings
* sealed bearings
* bearings for vibratory applications. CAF
ECA, ECAC
In addition to the standard range, SKF offers a
wide range of special spherical roller bearings
adapted for specific applications.
- ECAF
Open bearings —
SKF spherical roller bearings are produced to
several designs, depending on bearing series
and size. The differences are
* the arrangement of the floating guide ring
as well as
« the design of the inner ring and/or cages,
as described in the following (> fig. 2).
Cl), CC Two pressed window-type steel
cages, flangeless inner ringand CAFA
guide ring centred on the inner
ring (a).
EC(J), ECC(J) Reinforced roller complement,
two pressed window-type steel
cages, flangeless inner ring,
guide ring centred on the inner CAMA
ring (a).
696
Fig.
One-piece machined brass
cage, double-pronged, retaining
flanges on the inner ring and
guide ring centred on the inner
ring (b).
‘As CA, but with a steel cage.
Reinforced roller complement,
‘one-piece machined brass cage,
double-pronged, retaining
flanges on the inner ring, guide
ring centred on the inner ring (b)..
As ECA, but with a steel cage.
For bearings with a bore diam-
eter: «65mm:
‘Two pressed window-type steel
cages, flangeless inner ring and
guide ring centred on the inner
ring (e).
For bearings with a bore diam-
eter d> 65 mm:
‘Two pressed window-type steel
cages, flangeless inner ring
and guide ring centred on the
cages (d).
One-piece machined steel cage,
double-pronged, centred on the
outer ring raceway, retaining
flanges on the inner ring and
guide ring centred on the inner
Ting (e).
‘As CAFA, but with a brass cage.
SKFWith some exceptions, all SKF spherical roller
bearings are produced with a cylindrical bore as
well as with a tapered bore. The tapered bore of
bearings in the
+ 240, 241, 248 and 249 series have a taper
of 1:30, designation suffix K30, and the
* other series have a taper of 1:12, designation
suffix K.
Annular groove and lubrication holes
To facilitate efficient bearing lubrication, SKF
spherical roller bearings are provided with
+ an annular groove and three lubrication holes
in the outer ring (> fig. 3a), designation suf-
fix W33, or
‘three lubrication holes in the outer ring
(> fig. 3b), designation suffix W20.
E-design spherical roller bearings have the
annular groove and three lubrication holes fea~
ture as standard so that the designation suffix
'W33 is omitted from the bearing designation.
SKF
Fig.2
Fig.3
a3
wao
697