Académique Documents
Professionnel Documents
Culture Documents
TECHNICAL SPECIFICATION
1. Design
1.1 Materials
The sectional panel tank shall consist of 4' x 4' or 1m x 1m panel manufactured
from 0.8mm thick stainless steel grade 304/316 plate with a 5mm thick welding
bonded backing mild steel plate (British standard BS:1564:1975).
The internal surface shall be stainless steel combined with external surface of
mild steel plate.
1.2 Flanges
The sectional panels shall be pressed to double flange at the angles of 45 and
90 degree to the face of the plate on four sides.
1.4 Manufacture
The composite panel consists of stainless steel plate and mild steel plate,
which shall be produced in one piece by moulding process that can provide
an impermeable and corrosion resistant characteristic.
2. Accessories
2.1 Bolt, nut & washer
i) Stainless steel 304/316 material shall be used wherein contact with water.
ii) Hot dipped galvanised mild steel material shall be used externally of the
tank.
2.3 Covers
The tank cover shall be constructed by 1.2mm thick stainless steel grade 304/316
or 0.8mm stainless steel 304/316 composite with 1.5mm thick of mild steel plate
4' x 4' or 1m x 1m.