Académique Documents
Professionnel Documents
Culture Documents
TT REFERENCE: EWZINT2015111000001365
PROBLEM DESCRIPTION
PROBLEM SYMPTOMS
i.
FUNCTION BUSY
<rlcrp:cell=all;
NOT ACCEPTED
FUNCTION BUSY END
<rldep:cell=all;
NOT ACCEPTED
FUNCTION BUSY END
REMEDY CONDITIONS
No alarm will appear on allip; but only fail to execute any RL* command .
SOLUTION(S)
1. Use Command SYFAP; to print a list of all active Forlopps which match the parameters given in the
command.
<syfap;
ORDERED
<
WO
ZWBSC1_G13B_IPA6
ACTIVE FORLOPPS
FORLOPP-ID
H'0000 0693
H'0000 06F2
H'0000 0728
H'0000 0748
H'0000 074D
H'0000 097E
H'0000 0A0F
H'0006 356A
H'0000 0C7F
H'0000 0C9B
H'0000 0D07
H'0000 0D23
H'0000 0D34
STATUS
JOIN
JOIN
JOIN
NORMAL
JOIN
JOIN
JOIN
ABORTED
NORMAL
JOIN
JOIN
JOIN
JOIN
END
Check for command block RCCA as highlighted in Yellow above and take note the FORLOPP-ID
ADE
AUE
AOT
FORLOPP-ID STATUS
H'0006 356A ABORTED
AUDITCNT TIMECNT
0
0 RCCA
RCCGD
H'0064
H'0051
H'0090
BLOCK
START
STOP
ACTION
BLOCK
FILENUMBER INDIVIDUAL STATUS FID-VAR
ROTRAN
H'0000 H'0000 0045 ABORTED2 H'0045
RCCGD
H'0001 H'0000 00A6 ABORTED2 H'000D
ROTRAN
H'0001 H'0000 003F PASSIVE H'0039
ROTRAN
H'0000 H'0000 004D ABORTED1 H'004D
RCCA
H'0001 H'0000 0000 ABORTED1 H'0032
END
Take note of the FILENUMBER and the INDIVIDUAL value under the block RCCA
which will be used in the following command to release the forlopp ID.
3. Use command SYFRI to order a Forlopp release. The Forlopp identity and data (Forlopp User Identity) for
one individual connected to the Forlopp must be known before the command is used.
SYFRI: FID=6-H'356A, BLOCK=RCCA, FILENUM=1, IND=0, EXPL=HCOM-RLCRP;
4. Check if problem still exits by executing any RL* command: rlcrp:cell=all; If problem persists a
small restart may be needed to release the hanging commands.
CAUSE
RECOMMENDATION
These alarms cannot be avoided when some processes/resources hang since they arise from
hanging software, processes or events that occurs within the CP system.