Vous êtes sur la page 1sur 7

Beam 17.72m long. Cross section 410x860mm. Supports at 0.5m from each end.

Offset supports: plates 30x300 700long


Case 1
Horizontal beam. Horizontal supports. Left support aligned with beam. Right
support aligned with beam.

Case 2

Horizontal beam. Horizontal supports. Left support rotated 20 deg. Right


support aligned with beam.

Case 3

Tilt beam. Horizontal supports. Left support aligned with beam. Right support
aligned with beam.

Case 4

Tilt beam. Horizontal supports. Left support rotated 20 deg. Right support
aligned with beam.

Vous aimerez peut-être aussi