Académique Documents
Professionnel Documents
Culture Documents
HOME
SCORECARD
D (Guest User)
TIMEMANAGEMENT
QUESTIONSREPORT
Log Out
SOLUTION
MYTEST
MYPROFILE
REPORTS
BUYPACKAGE
NEWS
Q.
No
AskanExpert
Question Status
Q.1
What is the value of the following expression?
a. 21024
b. 22032
c. 22302
d.
22048
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.2
In the given sentence, one word is written in bold letters in the box.
Which of the options given below cannot be used to replace the word in
BOLD letters?
The seasoned stage artist easily portrayed the nuances of this complex
character.
a. shades
b.
passion
d.
finerpoints
c. subtleties
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.3
In the sentence given below, two words are missing. Identify the correct
option from the given options to complete the sentence:
b. Appalled,perilous
c. Stumped,unprecedented
d.
Attempt
Incensed,proscription
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.4
Which amongst the following is grammatically correct ?
a. Almostnobodyisinterestedinspendingtimeonreadingclassical
mechanics.
b. Almostnobodyisinterestedaboutspendingtimeonreadingclassical
mechanics
c.
Hardlyanybodyisinterestedinspendingtimereadingclassical
mechanics.
d. Hardlyanybodyisinterestedinspendingtimeinreadingclassical
mechanics.
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.5
All 2 digit numbers are written in ascending order with a vertical line
separating every pair of consecutive numbers. The number of these
vertical line is ___________.
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.6
In the following question, there is a main statement followed by 4
answer choices. From the options given, select the one that follows
from the main statement.
b. Sonakshiisnotbuyingaairconditionerimpliesthatsheisbuyingan
refrigerator
c. Sonakshiisneitherbuyingarefrigeratornoranairconditioner.
d.
Attempt
bothaandb
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.7
A shopkeeper gives a discount on the marked price based on quantity
pieces of the same lunch box, she was given 15% discount by the
shopkeeper. In both the cases, the net amount of profit for the
shopkeeper was identical. Which of the following is the ratio of marked
price to the cost price for the lunch box?
a. 4:5
b.
5:4
c. 8:7
d. 4:3
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.8
P and Q are distinct real numbers such that 4 < P < 5 and -9 < Q < -8.
Which of the following has the least possible value?
a.
P4Q
c.
PQ3
b. 64PQ
d. PQ4
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
SeeyourAnswer
Solution
Q.9
Rangan is appearing for a practical exam where there are a total of 20
experiments to choose from names of these experiments are written
c.
0.8
0.4
d. 0.5
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.10
Given below is information related to installed capacity and generation
of electricity in India for a specific year:
The closest integral value of capacity utilization for the entire country in
the year under consideration is ____________ %.
Installed capacity. Assume that all plants work 365 days a year for 24
hours per day].
Attempt
Incorrect
Your Ans.
FAQ?
.36
Correct Ans.
Haveanydoubt?
41
Solution
Q.11
The Miller indices of the direction OM as shown below is
a. (012)
b. (021)
c.
(120)
d. (201)
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.12
A heat engine that receives heat from a furnace at 1500 K and rejects
waste heat to river at 300 K, has a thermal efficiency of 40 percent.
Second law efficiency (in %) of this engine is
a.
b. 60
50
c. 55.5
d.
Attempt
25
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.13
An ideal gas undergoes a constant temperature process in a closed
system. The heat transfer and work respectively, are
a. 0, CV T
b. CV T, 0
c. CP T, RT
d.
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.14
For laminar forced convection over a flat plate, if the free stream
velocity increases by a factor of 2, the average heat transfer coefficient
a. changesbyafactorof1
b. decreasesbyafactorof
c.
increasesbyafactorof
d. increasesbyafactorof4
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.15
Match List-I (Type of products) with List-II (Type of layout) and select
the correct answer using the code given below:
a.
c.
b. b
d. d
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Correct Ans.
Haveanydoubt?
Solution
Q.16
Creep strain is
a.
Causedduetodeadloadonly
b. Causedduetoliveloadonly
c. Causedduetocyclicloadonly
d.
Attempt
Independentofload
Incorrect
Your Ans.
FAQ?
Haveanydoubt?
Solution
Q.17
Four column of the same material and having identical geometric
properties are supported in different ways as shown below:
b. III,IV,I,II
c. II,I,IV,III
d.
Attempt
I,II,IV,III
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.18
In a four bar mechanism as shown, if a force FA is acting at point A in
B in the direction of its velocity VB, then the ideal mechanical advantage
is
a.
b. FB VA
c.
d.
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.19
The following are the constituent steps in the process of powder
metallurgy
1. Powder conditioning
2. Sintering
Identify the current order in which they have to performed and select
the correct answer using the codes given below:
a. 1,2,3,4
b.
c.
3,1,4,2
3,1,2,4
d. 3,4,1,2
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.20
Match List-I (Name of the process) with List-II (Advantage) and select
the correct answer using the codes:
a.
A-2,B-3,C-5,D-1
b. A-4,B-1,C-2,D-3
c. A-2,B-1,C-5,D-3
d.
A-4,B-3,C-2,D-1
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.21
For fully developed flow of water in a pipe having diameter 0.1 m,
velocity 10 cm/s and Kinematic viscosity 105 m2/s, the value of darcy
friction factor is
a. 0.64
b. 0.16
c.
0.064
d. 0.016
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.22
A wheel of radius 10 cm can rotate freely about its centre. A string is
cropped over its rim and is pulled by a force of 5N. It is found that
0.25kgm2
b. 0.5kgm2
c. 0.75kgm2
d. 1kgm2
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.23
A pair of fair dice is thrown independently three times. The probability
of getting a score of exactly 9 twice is
a.
b.
c.
d.
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.24
The solution of the differential equation yd x + (x + x2y)dy = 0 is
a.
b.
c.
d. logy = Cx
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.25
acircle
b. anellipse
c. aparabola
d.
astraightline
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.26
If the material of key and shaft is same, and the width of key is one
fourth of the diameter of shaft, then the length of key will be __________
cm.
Attempt
Correct
Correct Ans.
FAQ?
7.85
Haveanydoubt?
Solution
Q.27
Heat transfer (in kJ/kg) for the reversible steady flow process 1 - 3
shown in figure below is_________ (kJ/kg).
Attempt
Correct
Correct Ans.
FAQ?
140
Haveanydoubt?
Solution
Q.28
For a diesel cycle, the clearance ratio is 10% and cut off takes place at
5% of stroke. The efficiency of the cycle is _____________ %.
Attempt
Correct
Correct Ans.
FAQ?
58
Haveanydoubt?
Solution
Q.29
An inverted U-tube is connected across two pipes A and B carrying
Attempt
Incorrect
Your Ans.
FAQ?
56
Correct Ans.
Haveanydoubt?
- 932
Solution
Q.30
The below figure shows a four for mechanism. If the radial acceleration
of the point C is 5 cm/s2, the length of the link CD is ____________ cm.
Attempt
Correct
Correct Ans.
FAQ?
20
Haveanydoubt?
Solution
Q.31
In a pure rolling the draft is increased by 100% and diameter of the roll
is also increased by 100%, the bite will increase by ____________ %.
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.32
Lubricating oil ( = 865 kg/m3, k = 0.14 W/m-K, cp = 1.78 kJ/kg-K and =
9 106 m2/s) at 60C enters a 1 cm diameter tube with a velocity of 3.5
m/s. The Prandtl number will be __________.
Attempt
Correct
Correct Ans.
FAQ?
98.98
Haveanydoubt?
Solution
Q.33
The minimum number of teeth on the pinion to avoid interference when
the addendum for stub teeth is 0.84 module, the pressure angle = cos
1
Attempt
Incorrect
Your Ans.
FAQ?
25
Correct Ans.
Haveanydoubt?
15.07
Solution
Q.34
The probability that A speaks truth is 4/5, while this probability for B is
3/4. The probability that they contradict each other when asked to speak
on a fact is ___________.
Attempt
Correct
Correct Ans.
FAQ?
0.35
Haveanydoubt?
Solution
Q.35
Attempt
Correct
Correct Ans.
FAQ?
1.41
Haveanydoubt?
Solution
Q.36
Saturated ammonia at 0.2365 MPa enters a single acting compressor
If head pressure is 1.1638 MPa, then the COP of the refrigerating cycle
is:
a. 5.49
b.
4.94
c. 4.14
d. 6.14
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.37
A mild steel plate 400 mm 800 mm 30 mm is to be shaped along its
wider face. The ratio of return time to cutting time is 2 : 3 and the feed
b. 20min
c.
13min
d. 17min
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.38
A petrol engine has a bore of 10 cm and a stroke of 15 cm. The work
done is 1000 joules. If the clearance volume is 200 cc then the heat
added will be:
a.
2060Joules
c.
1860Joules
b. 1960Joules
d. 1760Joules
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.39
In an orthogonal cutting test on mild steel, the following data were
obtained.
31.5
d.
63.4
c. 45
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.40
Air at a rate of 15 kg/min flows steadily in a pipe with a velocity of 25
m/s at 300 kPa and 350 K.
The rate of flow energy (kW) and rate of energy transport (in kW) by
mass respectively, are
[Take, for air R = 0.287 kJ/kgK, and CP = 1.008 kJ/kgK (at 350 K)]
a. 16.25and32.50
b.
25.11and88.27
c. 25.11and44.25
d. 52.24and88.27
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.41
A piece of material is subjected to two mutual perpendicular tensile
stresses and strains in the two directions are in the ratio 3 : 4. If the
value of Poissons ratio is 0.25 and greatest stress is 90 N/mm2, then
Volumetric strain is
[E = 200 GPa]
a. 0.15103
b. 0.25103
c.
0.35103
d. 0.45103
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.42
A solid shaft of 250 mm diameter has the same cross-sectional area as
the hollow shaft of same material with inside diameter of 200 mm.
These two shafts are rotating with same angular velocity and stressed
to same intensity. The ratio of power transmitted in the two shaft will be
a. 0.56
b.
c.
5.67
1.78
d. 1.11
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.43
In the cantilever beam PQR shown in figure below, the segment PQ has
flexural rigidity EI and the segment QR has infinite flexural rigidity
a.
b.
c.
d.
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.44
Match List-I with List-II and select the correct answer using the code
given below:
a.
b. b
c. c
d. d
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.45
Manning formula for velocity of flow V in uniform flow in a open channel
is written as
b. [L-2/3T2]
c.
[L-1/3T]
d. [LT1/3]
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.46
Oil of viscosity 0.97 poise and relative density 0.9 is flowing in a
horizontal circular pipe of diameter 100 mm and of length 10. If 100 kg
b. 2934Pa
c.
1467Pa
d. 2934Pa
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.47
1.80 m wide and 5 m long plate moves through a stationary air of
density 1.22 kg/m3 and viscosity 1.8 104 poise at a velocity of 1.75
m/s parallel to its length. The drag force on one side of the plate
assuming turbulent flow conditions is?
a. 0.043N
b. 0.087N
c.
0.056N
d. 0.093N
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.48
The figure shown a body of mass m moving with a velocity v = 10 m/s,
friction between the body and the ground is m, the work done by the
forces on the body per second?
a. [(mg +100)+200]10Nm
b.
c.
[(mg +100)200]10Nm
[(mg +100)+200]10Nm
d. [(mg +100)200]10Nm
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.49
A heat pump is used to maintain a house at 24C by extracting heat
from outside environment which is at 4C. The house is estimated to
thisheat-pumpispowerfulenoughtodothisjob
b. thisheatpumpisnotpowerfulenoughtodothisjob
c. thisheatpumpcycleisnotpossible
d. Noneoftheabove
Attempt
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.50
In the given following pairs of hole and shaft which one represent
interference fit
a. Pair1and2
b.
c.
Pair2and3
Onlypair2
d. Pair1,2and3
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.51
Which of the following is true regarding involute teeth?
D: A little variation in centre distance does not affect the velocity ratio.
a. A,BandC
b. AandB
c. AandC
d.
Attempt
A,B,CandD
Correct
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.52
Vibrating system consists of a mass of 50 kg, a spring with a stiffness
of X kN/m and a damper. The damping provided is 20% of the critical
value. The ratio of two consecutive amplitude is 3.6. The damped
frequency is 24 rad/s. Then X is
a. 15kN/m
b.
30kN/m
c. 45kN/m
d. 60kN/m
Not Attempt
Correct Ans.
FAQ?
Haveanydoubt?
Solution
Q.53
Consider a signal x(t) given by
, then
x(t) is given by
a.
b.
c.
d.
Attempt
Incorrect
Your Ans.
FAQ?
Correct Ans.
Haveanydoubt?
Solution
Q.54
Let
A is
a. A1doesnotexist
b.
A=(1)I,whereIisaunitmatrix
d.
A2=I
c. Aisazeromatrix
Attempt
Incorrect
Your Ans.
Incorrect
Your Ans.
FAQ?
Correct Ans.
Correct Ans.
Haveanydoubt?
Solution
Q.55
a.
b.
c.
d. 2
Attempt
FAQ?
Haveanydoubt?
Solution
Q.56
A frictionless piston-cylinder device initially contains air at 100 kPa and
0.25 m3. At this state, a linear spring (F x) is just touching the piston
but exerts no force on it. The air is now heated to final state of 0.75 m3
and 800 kPa. Workdone against the spring is ____________ kJ.
Attempt
Incorrect
Your Ans.
FAQ?
575
Correct Ans.
Haveanydoubt?
175
Solution
Q.57
The pitch circles of a train of a spur gears are shown below. Gear A is
running at 1000 rpm receives 3.5 kW of power through its shaft and
Attempt
Incorrect
Your Ans.
FAQ?
.9866
Correct Ans.
Haveanydoubt?
162.2
Solution
Q.58
Two dimensional stress tensor at a point is given by a matrix
Attempt
Correct
Correct Ans.
FAQ?
50
Haveanydoubt?
Solution
Q.59
The sale of a product during last four years is tabulated below:
The ratio of forecast for year 2014 using weighted moving average
method to simple moving average method is ___________.
Attempt
Incorrect
Your Ans.
FAQ?
.25
Correct Ans.
Haveanydoubt?
1.12
Solution
Q.60
For the velocity field given by
Attempt
Incorrect
Your Ans.
FAQ?
31.62
Correct Ans.
Haveanydoubt?
, the absolute
1622
Solution
Q.61
A tool with side cutting edge angle of 30 and end cutting edge angle of
10 is used for fine turning with a feed of 1 mm/rev. The nose radius of
Attempt
Incorrect
Your Ans.
FAQ?
.04
Correct Ans.
Haveanydoubt?
0.10
Solution
Q.62
The melting efficiency in case of arc welding of steel with a potential of
melt steel may be taken as 10 J/mm3 and the heat transfer efficiency as
0.85. The melting efficiency will be _____________.
Attempt
Correct
Correct Ans.
FAQ?
0.29
Haveanydoubt?
Solution
Q.63
If the shear strength of the work material is 350 MPa, the force required
plate with the help of flat ended die and punch in a press tool is
__________ N.
Attempt
Incorrect
Your Ans.
FAQ?
43982.30
Correct Ans.
Haveanydoubt?
128.02
Solution
Q.64
If x is real, the maximum value of
Attempt
Incorrect
Your Ans.
FAQ?
is ____________.
Correct Ans.
41
Haveanydoubt?
Solution
Q.65
If A =
Attempt
Correct
Correct Ans.
FAQ?
756
Haveanydoubt?
Solution