Académique Documents
Professionnel Documents
Culture Documents
A1. It is a condition which gives you freedom from hazard, risk, accident which may cause injury,
damage and loss to material or property damage and even death.
A2. It is an unexpected or unplanned event which may or may not result in injury or damage or
property loss or death.
A3. It is defined as a harmful condition sustained by the body as a result of an accident.
A4. Inherent property of a substance or an occurrence which has potential to cause loss or
damage property, person or environment.
A5. In probability of the realization of potential for loss or damage or injury.
A6. It is an event which represents deviation from the intended sequence of designed steps.
A7. Any company has a social and legal obligation to provide a safe and health working
environment to all his improvement to all his employees.
A8. The safety audit is the process that identifies unsafe conditions and unsafe acts on the
workplace and recommended safety improvement.
Walk through it, evaluates the unsafe condition noticeable to naked eye during work through the
workplace.
Intermediate - more details study and review of workplace design and workplace operation.
Comprehensive It evaluates the safety factors in the workplace on the base engineering,
analysis, testing, measurement.
A9. Safety tag can be defined as surface made of card board or paper board on which English &
local languages letters written for warning safety instructions to employees.
A10. Safety programme can be defined as five methods by which accident can be prevented
easily. There are : engineering, education, enforcement, enthusiasm and example safety
programmes are plain spoken and carry out certain legal steps.
A11. Attitude may be described as continuous behavior . if mans behavior is good, then his
action will be correct or safe as well.
A12. Emergency planning can be defined as a control measurer. It can control the accidents safe
guard people and provide information to media.
A13. Work permit system is a written documents for permission to undertake a job by area in
charge or it is written document issued by the area in charge to the performer to under take the
specific job.
A14. Any work should be done above 2 meters from ground..
A15. An area which is small and enclosed or an area where one entry and exits or where a man
cannot work comfortable in any location.
A16. It is an equipments used to protect the person from hazards such dust, dirt, fumes and
sparks etc. It is the barrier between hazard and person.
A17. The procedure of analyzing job for the specific purpose of finding the hazards and
developing .
A18. Prepare tool box meeting
Prepare monthly statistics
Prepare the checklist
Accident reports
Management meetings
Arrange the safety classes/training
Arrange monthly safety bulletin
Inspection of fire extinguisher
Inspection Life Jacket & safety equipment on the cabin
2. Every company will be required to the policy both in letter and in spirit.
3. The company shall comply straightly with act, laws, rules and regulations
4. The company shall impart training in health, safety and occupational health to all employees.
5. The company will adopt own safety and health standards where laws may not be available.
A43. There are three types of safety :
a. Workplace safety
b. Workers safety
c. Consumer safety
A44. 1. Carelessness
2. Fooling about it
3. Hurrying to increase production
4. Laziness in housekeeping
5. Hurrying in mealtime / coffeetime
6. Lack of attention due to worry
7. Alcohol and drugs
8. Lack of skilled and experience
9. Not using PPE
A45. There are 4 steps in safety :
1. Policy
2. Implementation
3. Take advantages of Petroleum Industrial Act
4. Safe working conditions.
A46. Direct cause : Unsafe act and unsafe condition.
Indirect Cause: 1. Lack of knowledge or skilled
2. Improper attitude
3. Physical or mental deficiency
A47. 1. Operating any equipment without properly authority
2. Failure to warning
3. Operating at unsafe speed
4. Failure to use PPE
5. Using hands instead of tools and equipment
6. Unsafe loading, placing or stacking
7. Unsafe position / posture
8. Working on moving equipments
9. Wearing loose clothes while working on running machine
10. Working at height without safety belt
A48. 1. Unguarded machine/ equipment
2. Poor lighting
3. Narrow road
4. Improper stacking
5. Oil or grease on floor
6. Unsafe ventilation
7. Unsafe defective construction
8. Defective condition of tools and equipment
9. Unsafe method or procedure
10. Bad housekeeping
objectives.
A55. 1. Taking care of workers and staff in the event of an accident
2. Providing health full environment and surrounding
3. Welfare
4. Continuous vigil and improvement.
A56. There are two types of PPE :
1. Respiratory : Air supplied - Compressed air breathing apparatus set
Air purified - Canisters gas mask
- Chemical cartridges respirator
- Surgical cotton mask
- Dust filter mask (dust respirator)
2. Non respiratory
A57. There are two types of work permit :
1. Cold work permit
2. Hot work permit
The hot work permit further classified into 3 types :
Normal hot work permit
Blanket hot work permit
Delegate hot work permit
A58. A blanket permit is a permit issued on the basis of location where the multiple jobs are to be
carried out at safe location.
A59. Delegated work permit used for areas requiring light control. Ex : Fabrication, yards. Valid
for 30 days.
A60. There are 4 types of accidents :
1. Near miss accident escape
2. No lost time - reported before 48hrs
3. Los time reported after 48hrs
4. Fated Death
A61. Major injury
Minor injury
No injury
A62. Serious
Minor
Property damage
No visible injury
A63. The risk is controlled by following process. There are : eliminate, replace, reduce, control
and PPE.
A64. 1. Danger due to fire/ explosion
2. Danger due to toxicity.
A65. The chemical hazards are controlled by engineering method, administrative method and
PPE.
A66. Firs aid is temporary and immediate care given to the victim of an accident.
A67.1. Inadequate skilled, improper supervision etc.
2. Rapid industrialization
3. Expansion of existing workplace
4. Setting up new industries involving hazards not known earlier.
Jawabannya...
A1. Itu adalah sebuah kondisi yang memberikan anda kebebasan dari bahaya, resiko,
kecelakaan yang mungkin menyebabkan cedera, kerusakan dan bahan untuk kehilangan atau
kerusakan pada properti dan bahkan kematian.
A2. Itu yang tidak diharapkan atau unplanned acara yang mungkin atau mungkin tidak
menyebabkan cedera atau kerusakan atau kehilangan properti atau mati.
A3 itu didefinisikan sebagai suatu kondisi yang berbahaya berkelanjutan oleh tubuh sebagai
akibat dari kecelakaan.
A4. Properti yang melekat dari substansi atau sebuah kejadian yang memiliki potensi untuk
menyebabkan kehilangan atau kerusakan pada properti, orang atau lingkungan.
Di A5. Probabilitas dari realisasi dari potensi untuk kehilangan atau kerusakan atau cedera.
A6. Itu adalah sebuah acara yang mewakili perkembangan dari ditujukan urutan yang dirancang
langkah.
A7. Setiap perusahaan memiliki kewajiban hukum dan sosial yang aman untuk menyediakan
lingkungan kerja dan kesehatan untuk semua nya perbaikan untuk semua karyawan.
A8. Audit keamanan adalah proses yang mengidentifikasi kondisi yang tidak aman dan tidak
aman kisah para rasul di tempat kerja dan fitur keamanan perbaikan.
Berjalan melalui itu, yang dievaluasi kondisi tidak aman yang bisa dilacak untuk mata telanjang
selama bekerja melalui tempat kerja.
Intermediate - detail lebih lanjut studi dan meninjau dari tempat kerja desain dan tempat kerja
operasi.
- yang mendalam tentang yang dievaluasi faktor keamanan di tempat kerja di dasar insinyur,
analisis, percobaan, pengukuran,.
Keselamatan A9. Tag dapat didefinisikan sebagai kartu permukaan yang terbuat dari papan atau
kertas papan di mana inggris & huruf bahasa lokal yang ditulis untuk peringatan keamanan
instruksi untuk karyawan.
A10. Program Keselamatan dapat didefinisikan sebagai lima metode oleh kecelakaan yang
dapat dicegah dengan mudah. Ada: Insinyur, pendidikan, penegakan, antusiasme dan contoh
program keselamatan yang dikatakan biasa dan melakukan langkah hukum tertentu.
Sikap A11. Dapat dijelaskan sebagai perilaku yang terus. Jika orang itu adalah perilaku yang
baik, maka aksi yang akan benar atau aman.
A12. Perencanaan tanggap darurat dapat didefinisikan sebagai kontrol measurer. Hal ini dapat
mengontrol kecelakaan aman penjaga orang dan memberikan informasi ke media.
A13. Ijin kerja sistem adalah "dokumen tertulis" izin untuk melakukan pekerjaan dengan area di
tagihan atau tertulis dokumen yang dikeluarkan oleh daerah yang bertanggung jawab untuk
pengganti untuk di bawah mengambil tugas tertentu.
A14. Pekerjaan apapun harus dilakukan di atas 2 meter dari tanah..
A15. Sebuah kawasan yang kecil dan enclosed atau sebuah kawasan di mana satu masukan
dan keluar atau di mana seorang pria tidak dapat bekerja nyaman di setiap lokasi.
A16. Ini adalah alat yang digunakan untuk melindungi orang dari kerepotan seperti kotoran,
debu, dan uap sparks dll. Ini adalah penghalang antara Hazard dan orang.
A17. Prosedur dari pekerjaan untuk menganalisa tujuan tertentu yang menemukan kerepotan
dan berkembang.
A18. Mempersiapkan pertemuan kotak perkakas
Mempersiapkan Statistik bulanan
Melindungi - asam, minyak grease, Murni Alex karet sarung tangan listrik
4. Kaki dan kaki - perlindungan keamanan, karet sepatu boot, kaki kaki penjaga
Buat - metal, kulit, karet
Melindungi - jatuh bahan dan elektronika bekerja
5. Perlindungan tubuh - pesawat, hood, coverall, jaket
Buat - karet, kulit, kanvas, memimpin, PVC, asbestos
Asbestos Hood - fire fighting
Karet PVC, jas lengkap - (corrosively cair, UAP, vapour)
Keselamatan sabuk pengaman - bekerja melebihi 3 MT
6. Telinga perlindungan - earmuff - kebisingan-30-135 DB
7. Ear Plug-115-120 DB
A54. Sebuah seni dan ilmu menetapkan tujuan keselamatan dari perusahaan industri dan
kegiatan yang terkait perencanaan, administrasi, meningkatkan, berbagai fungsi untuk mencapai
tujuan keselamatan.
1. A55. Merawat pekerja dan staf dalam acara kecelakaan
2. Menyediakan lingkungan penuh kesehatan dan sekitar
3. Kesejahteraan
4. Malam dan perbaikan yang berkelanjutan.
A56. Ada dua jenis ppe:
1. Pernafasan: Air yang diberikan - bernapas udara terkompresi aparat set
Air disucikan - canisters masker gas
- kimia respirator memproduksi
- BEDAH KAPAS MASK
- debu filter mask (debu respirator)
2. Non pernapasan
A57. Ada dua jenis ijin kerja:
1. Dingin ijin kerja
2. Hot ijin kerja
Ijin kerja panas lebih lanjut diklasifikasikan menjadi 3 jenis:
Panas normal ijin kerja
Selimut panas ijin kerja
Delegasi Panas ijin kerja
A58. Selimut biarlah adalah ijin yang dikeluarkan berdasarkan lokasi di mana beberapa
pekerjaan yang akan dilaksanakan di lokasi yang aman.
A59. Didelegasikan ijin kerja yang digunakan untuk daerah yang membutuhkan cahaya kontrol.
Mis: Swadaya Graha, yards. Berlaku selama 30 hari.
A60. Ada 4 jenis kecelakaan:
1. Dekat miss kecelakaan - escape
2. Tidak kehilangan waktu - dilaporkan sebelum 48 jam
3. Los waktu - dilaporkan setelah 48 jam
4. Bernasib - kematian
A61. Cedera utama
Cedera minor
Tidak ada luka
A62. Serius
Minor
A87. Keselamatan itu adalah tanggal teknik pengumpulan dan dilaksanakan untuk
mempromosikan kerjasama karyawan lengkap kondisi dalam pelaksanaan perusahaan
keamanan survei.
A88. Proses Lifting, membawa dan tumpukan bahan oleh manusia.
A89. Didefinisikan sebagai seni dan ilmu presentasi dan peningkatan kesehatan dan
kenyamanan dari pekerja.
Kehadiran A90. Beracun,
Sementara tinggi.
Suara yang berlebihan
Emisi dari radiasi
Pencahayaan yang tidak benar
Ventilasi yang tidak benar
Proses penanganan yang melibatkan beracun.