Académique Documents
Professionnel Documents
Culture Documents
12(RFE,RN)7/14/142:47PMPage1
Feed Escapements
5.1
Feed Escapements
RFE Series
Dual-Finger Feed Escapement
Conveying systems used for part separating, part process
pre-staging, and part feeding
Finger locking mechanism ensures that only one
finger can be retracted at one time for proper part feeding
Square shaft maintains proper finger alignment
and prevents shaft from rotating
Unit can be mounted using the top, bottom, or face surface
Preferred Market: l Global
See
Page
5.2
RN Series
Single Finger Feed Escapement
Conveying Systems used for part separating or part quality ejector
Two units can be used in tandem to separate long parts on a track
or conveyor or act independently of one another
The unit can be used in low load, less precise thruster applications
Square shaft maintains proper Finger alignment and prevents shaft
from rotating
Unit can be mounted using the top, bottom, or face surface
sales@edragontek.com
Preferred Market: l Global
5.8
RFE SERIES
See
Page
AUTOMATION TECHNOLOGY
destaco.com
5.1-5.9(RFE)_7.1-7.12(RFE,RN)7/23/149:54AMPage2
Feed Escapements
5.2
sales@edragontek.com
Technical Specifications:
Mounting Information:
RFE SERIES
40 Micron or Better
Not Necessary*
Low Moisture Content (dry)
-35~80 C
-30~150 C
5 million cycles
10+ million cycles*
Yes
Yes
destaco.com
AUTOMATION TECHNOLOGY
5.1-5.9(RFE)_7.1-7.12(RFE,RN)7/14/142:47PMPage3
Feed Escapements
5.3
Product Features
Hard Coat Anodize
Sealed Design
Self-Lubricating Seals
Sensors and
Flow Controls
Adjustable
Retract Stops
(sold separately-see
How to Order Section
for more info)
Thrust Force: 25 lb
Weight:
.33 lb
111 N
.15 Kg
See
Page
5.4
Quality Components
Dynamic components are
precision ground and hardened
for wear resistance and long life
Locking Key
Sensor
Magnet
Thrust Force: 50 lb
Weight:
.85 lb
Built-in sensor
magnet for use with
Hall Effect sensors
222 N
.39 Kg
Dowel Holes
Slip fit dowel holes in body
for precision applications
Operating Principle
Cap
See
Page
5.5
Piston
Locking Key
sales@edragontek.com
Pressure
Body
Sensor
Magnet
Standard
Exhaust
Pressure
See
Page
Shaft
5.6
Finger
Exhaust Exhaust
Dual double acting pistons slide in opposite directions within the body
through the use of internal porting.
When pressure is applied, one piston extends and passes a port in
its cylinder wall which is linked to the retract side of the other
pistons cylinder.
Pressure Exhaust
RFE SERIES
Adjustable
Retract
Position
Stop
400 N
.83 Kg
Pressure
destaco.com
5.1-5.9(RFE)_7.1-7.12(RFE,RN)7/14/142:47PMPage4
Feed Escapements
5.4
2.01 [51]
STROKE ADJUSTMENT
SCREWS
(STANDARD)
1.19
[30]
C
L
.625 [15.9]
1.250
[31.8]
1.625 [41.3]
2X [M5]
AIR PORTS
1.500
[38.1]
C
L
4X [M4]
THRU
.500
[12.7]
C
L
.750
[19.1]
.312 [7.9]
C
L
.500
[12.7]
.187 [4.8]
2.280 [57.9]
A
.595
[15.1]
2X [ 3 H7 X 3.8 DP]
1.250
[31.8]
4X M4 [5.5 DP]
SENSOR SLOT
4X [M4 X 5 DP]
C
L
.313 [7.9]
1.250 [31.75]
DOWELS
1.250
[31.8]
VIEW A-A
sales@edragontek.com
.375 [9.5]
.375 [9.5]
Dimensions are
symmetrical about
centerline
RFE SERIES
Loading Information
Third Angle
Projection
Metric Threads
Course Pitch
Imperial in.
Metric [mm]
0.00 = .01
0.000 = .005
0.0000 = .0005
[0.] = [.25]
[0.0] = [.13]
[0.00] = [.013]
BASIC MODEL
MX
MY
VITON SEALS
MZ
X
Loading Capacity
Maximum Moment Mx
Maximum Moment My
Maximum Moment Mz
Static
50 in.-lbs. [6 Nm]
50 in.-lbs. [6 Nm]
50 in.-lbs. [6 Nm]
Dynamic
5.0 in.-lbs. [0.57 Nm]
5.0 in.-lbs. [0.57 Nm]
5.0 in.-lbs. [0.57 Nm]
Extend
[111 N]
[88 N]
[66 N]
[441 N]
[22 N]
25 lbs.
25 lbs.
15 lbs.
10 lbs.
5 lbs.
RFE-11M - T - V
Retract
20 lbs. [88 N]
16 lbs. [70 N]
12 lbs. [53 N]
8 lbs. [35 N]
4 lbs. [17 N]
Order #
OHSN-017
OHSP-017
CABL-010
CABL-013
QTY/UNIT
1 or 2
1 or 2
1 or 2
1 or 2
VLVF-008
SLKT-110
SLKT-110V
1 or 2
1
1
CL
.81 [21]
destaco.com
AUTOMATION TECHNOLOGY
5.1-5.9(RFE)_7.1-7.12(RFE,RN)7/14/142:47PMPage5
Feed Escapements
5.5
2.99 [76]
Specifications
RFE-12M
Thrust Force @ Maximum PSI ....................... 50 lbs.
222 N
Stroke............................................................. 1.000 in.
25.40 mm
Stroke Adjustability......................................... 0.75 in.
19 mm
Weight ............................................................ 0.85 lbs.
0.39 Kg
Pressure Range.............................................. 40-100 psi
3-7 bar
Cylinder Bore .............................................. 0.787 in.
20 mm
Rod ............................................................. 0.313 in.
7.95 mm
3
Displacement ................................................. 0.487 in .
8.0 cm3
Temperature Range
Standard Seals....................................... -30~180 F -35~80 C
Viton Seals............................................ -20~300 F -30~150 C
Actuation Time ............................................... 0.60 sec.
0.60 sec.
Parts Escaped per Minute.............................. 100
100
Valve required to actuate ...............................
4-way, 2-position
1.85
[47]
C
L
1.000 [25.4]
1.750
[44.5]
.375 [9.5]
2.000 [50.8]
2X [M5]
AIR PORTS
STROKE ADJUSTMENT
SCREWS
(STANDARD)
1.875
[47.6]
C
L
4X [M5]
THRU
.500
[12.7]
C
L
.374 [9.5]
4X
[M5 X 10 DP]
C
L .625 [15.9]
.980 [24.9]
.187 [4.8]
3.365 [85.5]
2.250
[57.2]
2X [ 5 H7 X 5 DP]
.938
[23.8]
4X [M5 X 7 DP]
SENSOR SLOT
1.750
[44.5]
C
L
2.0000
[50.80]
VIEW A-A
sales@edragontek.com
.500 [12.7]
.625 [15.9]
Dimensions are
symmetrical about
centerline
Loading Information
Third Angle
Projection
Metric Threads
Course Pitch
Imperial in.
Metric [mm]
0.00 = .01
0.000 = .005
0.0000 = .0005
[0.] = [.25]
[0.0] = [.13]
[0.00] = [.013]
BASIC MODEL
MX
MY
VITON SEALS
RFE-12M - T - V
MZ
X
RFE SERIES
Static
150 in.-lbs. [17 Nm]
150 in.-lbs. [17 Nm]
150 in.-lbs. [17 Nm]
Dynamic
15.0 in.-lbs. [1.70 Nm]
15.0 in.-lbs. [1.70 Nm]
15.0 in.-lbs. [1.70 Nm]
Extend
[216 N]
[173 N]
[130 N]
[86 N]
[43 N]
50 lbs.
40 lbs.
30 lbs.
20 lbs.
10 lbs.
Retract
40 lbs. [182 N]
32 lbs. [146 N]
25 lbs. [109 N]
16 lbs. [73 N]
8 lbs. [36 N]
SENSOR ACCESSORIES
NPN Hall Effect Sensor with Quick Disconnect*
PNP Hall Effect Sensor with Quick Disconnect*
Quick Disconnect 2M Cable Length*
Quick Disconnect 5M Cable Length*
PNEUMATIC ACCESSORIES
M5 Adjustable Flow Control
Standard Seal Repair Kit
Viton Seal Repair Kit
*Sensor and cable sold separately.
Order #
OHSN-017
OHSP-017
CABL-010
CABL-013
QTY/UNIT
1 or 2
1 or 2
1 or 2
1 or 2
VLVF-008
SLKT-111
SLKT-111V
1 or 2
1
1
HALL EFFECT
SENSORS WITH
QUICK DISCONNECT
CL
1.24 [31]
AUTOMATION TECHNOLOGY
destaco.com
5.1-5.9(RFE)_7.1-7.12(RFE,RN)7/14/142:47PMPage6
Feed Escapements
5.6
Specifications
RFE-13M
Thrust Force @ Maximum PSI ....................... 90 lbs.
400 N
Stroke............................................................. 1.250 in.
31.75 mm
Stroke Adjustability......................................... 0.75 in.
19 mm
Weight ............................................................ 1.84 lbs.
0.83 Kg
Pressure Range.............................................. 40-100 psi
3-7 bar
Cylinder Bore .............................................. 1.063 in.
27 mm
Rod ............................................................. 0.375 in.
9.52 mm
Displacement ................................................. 1.108 in3.
18.2 cm3
Temperature Range
Standard Seals....................................... -30~180 F -35~80 C
Viton Seals............................................ -20~300 F -30~150 C
Actuation Time ............................................... 0.70 sec.
0.70 sec.
Parts Escaped per Minute.............................. 85
85
Valve Required to Actuate ..............................
4-way, 2-position
3.92 [100]
C
L
2.250
[57.1]
1.250 [31.8]
.499 [12.7]
2.250 [57.2]
2X
C'BORE CLEARANCE
[ 8.9 X 5 DP M5]
STROKE
ADJUSTMENT
SCREWS
(STANDARD)
4X M6 [10 DP]
4X [M6]
THRU
.500 [12.7]
C
L
2.375 [60.3]
C
L
1.360
[34.5]
.499 [12.7]
1.000
C
L
[25.4]
.250 [6.4]
2.750 [69.9]
4.420 [112.3]
A
2X [5H7 X 6DP]
1.219
[31.0]
SENSOR SLOT
4X [M6 X 11DP]
2.2500
[57.15]
DOWELS
C
L
2.250
[57.1]
sales@edragontek.com
VIEW A-A
.750 [19.0]
.750 [19.0]
Dimensions are
symmetrical about
centerline
RFE SERIES
Loading Information
Third Angle
Projection
Metric Threads
Course Pitch
Imperial in.
Metric [mm]
0.00 = .01
0.000 = .005
0.0000 = .0005
[0.] = [.25]
[0.0] = [.13]
[0.00] = [.013]
MX
MY
MZ
X
VITON SEALS
RFE-13M - T - V
TOP FINGER MOUNTING
Loading Capacity
Maximum Moment Mx
Maximum Moment My
Maximum Moment Mz
Static
250 in.-lbs. [28 Nm]
250 in.-lbs. [28 Nm]
250 in.-lbs. [28 Nm]
Dynamic
25.0 in.-lbs. [2.83 Nm]
25.0 in.-lbs. [2.83 Nm]
25.0 in.-lbs. [2.83 Nm]
Extend
[394 N]
[315 N]
[236 N]
[157 N]
[78 N]
88 lbs.
71 lbs.
53 lbs.
35 lbs.
17 lbs.
Retract
77 lbs. [345 N]
62 lbs. [276 N]
46 lbs. [207 N]
31 lbs. [138 N]
15 lbs. [69 N]
SENSOR ACCESSORIES
NPN Hall Effect Sensor with Quick Disconnect*
PNP Hall Effect Sensor with Quick Disconnect*
Quick Disconnect 2M Cable Length*
Quick Disconnect 5M Cable Length*
Order #
OHSN-017
OHSP-017
CABL-010
CABL-013
QTY/UNIT
1 or 2
1 or 2
1 or 2
1 or 2
PNEUMATIC ACCESSORIES
M5 Adjustable Flow Control
Standard Seal Repair Kit
Viton Seal Repair Kit
*Sensor and cable sold separately.
VLVF-008
SLKT-112
SLKT-112V
1 or 2
1
1
4.28 [109]
destaco.com
AUTOMATION TECHNOLOGY
5.1-5.9(RFE)_7.1-7.12(RFE,RN)7/14/142:47PMPage7
Feed Escapements
5.7
Notes
RFE SERIES
sales@edragontek.com
AUTOMATION TECHNOLOGY
destaco.com
5.10-5.16(RN)_7.1-7.12(RFE,RN)7/23/149:55AMPage8
Feed Escapements
5.8
RN Single Finger
Feed Escapement
Low cost thruster:
The unit can be used in low
load, less precise thruster
applications. The square shaft
carries moderate side loading
and resists rotation.
Feed escapement:
Two RN units can be used in
tandem to separate long parts
on a track or conveyor and act
independently of one another.
sales@edragontek.com
Technical Specifications:
Mounting Information:
RN SERIES
40 Micron or Better
Not Necessary*
Low Moisture Content (dry)
-35~80 C
-30~150 C
5 million cycles
10+ million cycles*
Yes
Yes
destaco.com
AUTOMATION TECHNOLOGY
5.10-5.16(RN)_7.1-7.12(RFE,RN)7/14/1410:15PMPage9
Feed Escapements
5.9
Product Features
Hard Coat Anodize
Self-Lubricating Seals
Thrust Force: 25 lb
Weight:
.19 lb
RN-11M
15.9mm
111 N
.09 Kg
Sealed Design
Sealed design repels
contaminants
Adjustable
Retract Stops
Quality Components
Dynamic components are
precision ground and hardened
for wear resistance and long life
See
Page
Thrust Force: 50 lb
Weight:
.42 lb
Sensors and
Flow Controls
(sold separately-see
How to OrderSection
for more info)
Sensor Magnet
Dowel Holes
See
Page
Operating Principle
Cylinder Cap
5.12
RN-12M
25.4mm
222 N
.19 Kg
5.13
Adjustable
Retract
Position
Stop
RN-13M
31.8mm
400 N
.41 Kg
See
Page
5.14
Body
Magnet
Shaft
Exhaust
Cap
Finger
RN SERIES
sales@edragontek.com
Piston
Pressure
Pressure
Exhaust
AUTOMATION TECHNOLOGY
destaco.com
5.10-5.16(RN)_7.1-7.12(RFE,RN)7/14/1410:15PMPage10
Feed Escapements
5.10
EXTEND
2X M5
AIR PORTS
RETRACT
28
25.4
[1.11]
[1.000]
23
[.90]
.28 [7]
SENSOR SLOT
STROKE ADJUSTMENT
SCREW
(STANDARD)
14.0
[.550]
7.9 [.313]
CL
2X M4 THRU
FINGER SIDE MOUNTING
STANDARD. TOP MOUNT 4X M4 X 5DP
OPTIONAL -T
[M4 X .22DP]
12.7
[.500]
15.9
[.625]
CL
12.7
[.500]
7.9 [.313]
CL
19.1
[.750]
CL
4.8 [.187]
22.2
[.875]
57.9 [2.280]
A
2X 3H7 X 3.8 DP
[.1250SF X .15 DP]
SENSOR
SLOTS
CL
17.46
[.6875]
CL
CL
sales@edragontek.com
2X M5 X 5 DP
[#10-32 X .20 DP]
12.7 [.500]
18.5 [.730]
VIEW A-A
Dimensions are
symmetrical about
centerline
RN SERIES
Loading Information
Loading Capacity
Maximum Moment Mx
Maximum Moment My
Maximum Moment Mz
Static
50 in.-lbs. [6 Nm]
50 in.-lbs. [6 Nm]
50 in.-lbs. [6 Nm]
Dynamic
5.0 in.-lbs. [.57 Nm]
5.0 in.-lbs. [.57 Nm]
5.0 in.-lbs. [.57 Nm]
MX
MZ
X
25 lbs.
20 lbs.
15 lbs.
10 lbs.
5 lbs.
Metric Threads
Course Pitch
Imperial in.
Metric [mm]
0.00 = .01
0.000 = .005
0.0000 = .0005
[0.] = [.25]
[0.0] = [.13]
[0.00] = [.013]
Retract
20 lbs. [89 N]
16 lbs. [71 N]
12 lbs. [53 N]
8 lbs. [35 N]
4 lbs. [18 N]
VITON SEALS
BASIC MODEL
RN-11 M - T - V
METRIC
MY
Thrust Force
Third Angle
Projection
SENSOR ACCESSORIES
NPN Hall Effect Sensor with Quick Disconnect*
PNP Hall Effect Sensor with Quick Disconnect*
Quick Disconnect 2M Cable Length*
Quick Disconnect 5M Cable Length*
PNEUMATIC ACCESSORIES
#10-32 Adjustable Flow Control
M5 Adjustable Flow Control
Standard Seal Repair Kit
Viton Seal Repair Kit
ORDER #
QTY/UNIT
OHSN-006
OHSP-006
CABL-010
CABL-013
1 or 2
1 or 2
1 or 2
1 or 2
VLVF-007
VLVF-008
SLKT-114
SLKT-114V
1 or 2
1 or 2
1
1
.55[14]
destaco.com
AUTOMATION TECHNOLOGY
5.10-5.16(RN)_7.1-7.12(RFE,RN)7/14/1410:15PMPage11
Feed Escapements
5.11
34.3
[1.35]
25.4
[1.000]
41.7
[1.64]
11 [.43]
19.1
[.750]
9.5 [.375]
CL
SENSOR
SLOT
RETRACT
EXTEND
STROKE ADJUSTMENT
SCREW (STANDARD)
A
Specifications
RN-12
RN-12M
Thrust Force @ Maximum PSI ....................... 50 lb
222 N
Stroke............................................................. 1.000 in.
25.4 mm
Stroke Adjustability......................................... 0.75 in.
19 mm
Weight ............................................................ 0.42 lb
0.19 Kg
Pressure Range.............................................. 40-100 psi
3-7 bar
Cylinder Bore .............................................. 0.787 in.
19.99 mm
Rod ............................................................. 0.313 in.
7.95 mm
Displacement ................................................. 0.244 in3.
4.0 cm3
Temperature Range
Standard Seals....................................... -30~180 F -35~80C
Viton Seals............................................ -20~300 F -30~150C
Actuation Time ............................................... 0.21 sec.
0.21 sec.
Valve required to actuate ...............................
4-way, 2-position
2X M5 THRU
FINGER SIDE MOUNTING
STANDARD. TOP MOUNT
OPTIONAL -T
12.7
[.500]
28.6
[1.125]
CL
19.1
[.750]
9.5 [.375]
CL
CL
24.9
[.980]
4.8 [.187]
85.5 [3.365]
A
4X M5 X 10DP
[M5 X .30DP]
20.6
[.812]
SENSOR
SLOTS
2X 3H7 X 5.0 DP
[.1250SF X .20 DP]
CL
23.81
[.9375]
CL
CL
sales@edragontek.com
VIEW A-A
2X M6 X 7.6 DP
[1/4-20 X .30 DP]
19.1 [.750]
28.6 [1.125]
Dimensions are
symmetrical about
centerline
Loading Capacity
Maximum Moment Mx
Maximum Moment My
Maximum Moment Mz
Metric Threads
Course Pitch
Imperial in.
Metric [mm]
0.00 = .01
0.000 = .005
0.0000 = .0005
[0.] = [.25]
[0.0] = [.13]
[0.00] = [.013]
Static
150 in.-lbs. [17 Nm]
150 in.-lbs. [17 Nm]
150 in.-lbs. [17 Nm]
Dynamic
15.0 in.-lbs. [1.70 Nm]
15.0 in.-lbs. [1.70 Nm]
15.0 in.-lbs. [1.70 Nm]
BASIC MODEL
RN-12 M - T - V
MX
MY
VITON SEALS
RN SERIES
Loading Information
Third Angle
Projection
MZ
X
Extend
[217 N]
[173 N]
[130 N]
[87 N]
[43 N]
49 lbs.
39 lbs.
29 lbs.
19 lbs.
10 lbs.
Retract
41 lbs. [182 N]
33 lbs. [146 N]
24 lbs. [110 N]
16 lbs. [73 N]
8 lbs. [37 N]
SENSOR ACCESSORIES
NPN Hall Effect Sensor with Quick Disconnect*
PNP Hall Effect Sensor with Quick Disconnect*
Quick Disconnect 2M Cable Length*
Quick Disconnect 5M Cable Length*
PNEUMATIC ACCESSORIES
#10-32 Adjustable Flow Control
M5 Adjustable Flow Control
Standard Seal Repair Kit
Viton Seal Repair Kit
ORDER #
QTY/UNIT
OHSN-006
OHSP-006
CABL-010
CABL-013
1 or 2
1 or 2
1 or 2
1 or 2
VLVF-007
VLVF-008
SLKT-115
SLKT-115V
1 or 2
1 or 2
1
1
.67[17]
AUTOMATION TECHNOLOGY
destaco.com
5.10-5.16(RN)_7.1-7.12(RFE,RN)7/14/1410:15PMPage12
Feed Escapements
5.12
2X M5
AIR PORTS
RETRACT
55
[2.17]
25.4
[1.000] 31.8 [1.250] MAX
12.7 [.500] MIN
STROKE
.38 [10]
22.8
[.900]
CL
SENSOR SLOT
12.7
[.500]
STROKE ADJUSTMENT
SCREW
(STANDARD)
Specifications
RN-13
RN-13M
Thrust Force @ Maximum PSI ....................... 90 lb
400 N
Stroke............................................................. 1.250 in.
31.8 mm
Stroke Adjustability......................................... 0.75 in.
19 mm
Weight ............................................................ 0.90 lb
0.41 Kg
Pressure Range.............................................. 40-100 psi
3-7 bar
Cylinder Bore .............................................. 1.063 in.
27.00 mm
Rod ............................................................. 0.375 in.
9.52 mm
Displacement ................................................. 0.554 in3.
9.1 cm3
Temperature Range
Standard Seals....................................... -30~180 F -35~80 C
Viton Seals............................................ -20~300 F -30~150 C
Actuation Time ............................................... 0.28 sec.
0.28 sec.
Valve required to actuate ...............................
4-way, 2-position
2X M6 THRU
FINGER SIDE MOUNTING
STANDARD. TOP MOUNT
OPTIONAL -T
12.7 [.500]
4X M6 X 10DP
[M6 X .30DP]
CL
1.000
[25.4]
CL
112.3 [4.420]
CL
34.5
[1.360]
12.7
[.500]
6.4
[.250]
4.9
[1.375]
25.4
[1.000]
5H7 X 6DP
[.1875SF X .25DP]
28.58
[1.1250]
CL
SENSOR
SLOTS
CL
CL
22.2 [.875]
sales@edragontek.com
2X M6 X 10.9 DP
[1/4-20 X .43 DP]
34.9
[1.375]
VIEW A-A
Dimensions are
symmetrical about
centerline
RN SERIES
Loading Information
Third Angle
Projection
RN-13 M - T - V
Y
METRIC
Static
250 in.-lbs. [28 Nm]
250 in.-lbs. [28 Nm]
250 in.-lbs. [28 Nm]
Dynamic
25.0 in.-lbs. [2.83 Nm]
25.0 in.-lbs. [2.83 Nm]
25.0 in.-lbs. [2.83 Nm]
88 lbs.
71 lbs.
53 lbs.
35 lbs.
18 lbs.
[0.] = [.25]
[0.0] = [.13]
[0.00] = [.013]
MX
MZ
Thrust Force
Metric [mm]
0.00 = .01
0.000 = .005
0.0000 = .0005
VITON SEALS
BASIC MODEL
MY
Imperial in.
Loading Capacity
Maximum Moment Mx
Maximum Moment My
Maximum Moment Mz
Metric Threads
Course Pitch
Retract
77 lbs. [345 N]
62 lbs. [276 N]
46 lbs. [207 N]
31 lbs. [138 N]
15 lbs. [69 N]
SENSOR ACCESSORIES
NPN Hall Effect Sensor with Quick Disconnect*
PNP Hall Effect Sensor with Quick Disconnect*
Quick Disconnect 2M Cable Length*
Quick Disconnect 5M Cable Length*
PNEUMATIC ACCESSORIES
#10-32 Adjustable Flow Control
M5 Adjustable Flow Control
Standard Seal Repair Kit
Viton Seal Repair Kit
ORDER #
QTY/UNIT
OHSN-006
OHSP-006
CABL-010
CABL-013
1 or 2
1 or 2
1 or 2
1 or 2
VLVF-007
VLVF-008
SLKT-116
SLKT-116V
1 or 2
1 or 2
1
1
.75[19]
destaco.com
AUTOMATION TECHNOLOGY