Académique Documents
Professionnel Documents
Culture Documents
www.huawei.com
Page 2
Page 3
Page 4
Quick Start
Operation Precautions
Page 5
Quick Start
NE
T2000
NE
GNE
NMS
HUB
NE
T2000LCT
HUB
IP address :129.9.X.X
Submask : 255.255.0.0
IP address :129.9.0.ID
Submask : 255.255.0.0
Page 6
Page 7
Action
Click
Page 8
Page 9
Page 10
Operation Precautions
l
Usually, when a dangerous operation is performed, the T2000LCT will ask for confirmation.
Page 11
Page 12
Configuring Service
Stage
Description
Creating an NE
Configuring the NE
Creating SDH
Services
Creating Ethernet
Services
Page 13
Create NE
1. Click <Create> in the NE
Information Management.
2. Select the NE type from the
Create Topology Object dialog
box and enter the attribute
information of the NE. (Default NE
user of the T2000-LCT: lct; default
password: password. )
Page 14
Configuring NE
1. Click <Configuration> in the NE Information Management.
2. Select Manual Configuration and click Next.
3. The Confirm dialog box is displayed. Click <OK>. The NE Configuration Wizard
dialog box is displayed.
4. Set the NE attributes and click <Next>. The NE panel is displayed.
5. Click <Query Physical Slot> to upload the data to the physical slot from the NE side.
6. After all the boards have been created, click <Next>. Then, click <Finish>
Page 15
..
HUAWEI TECHNOLOGIES CO., LTD.
Page 16
Page 17
Page 18
Page 19
service
..
HUAWEI TECHNOLOGIES CO., LTD.
Page 20
Procedure
Action
Page 21
Page 22
Page 23
Page 24
Procedure
Action
..
HUAWEI TECHNOLOGIES CO., LTD.
Page 25
Page 26
Page 27
Page 28
Procedure
Action
Page 29
Page 30
Page 31
Page 32
Page 33
Procedure
Action
Page 34
Page 35
Page 36
Page 37
Page 38
Procedure
Action
Page 39
Page 40
Page 41
Page 42
Page 43
Procedure
Action
Page 44
Page 45
Page 46
Creating Cross-Connection
Between the Ethernet and the
Line Boards
1. In the NE Explorer, click the NE and
select [Configuration/SDH Service
Configuration] from the Function Tree
2. Click <Create> ,then Create the crossconnection between the Ethernet board
and line board.
Page 47
3.Click <Configure Mount Port>. The "VB Mount Port Configuration" dialog box is displayed.
Click <>>>
4.Click <OK>
Page 48
Page 49
Page 50
Maintenance
Synchronizing NE Time
Browsing Alarms
Browsing Performance
Automatic Disabling of NE
Functions
Cleaning Up the Hard Disk of
the T2000-LCT Computer
Troubleshooting
Page 51
Synchronizing NE Time
Manual Synchronization
1, Select [Configuration/NE Time Synchronization] from the Main Menu;
2, Select one or more NEs in the left pane and click the double-right-arrow button;
3, Modify the value of Synchronize Mode to NM.
Automatic Synchronization
1, Select [Configuration/NE Time Synchronization] from the Main Menu;
2, Select one or more NEs in the left pane and click the double-right-arrow button;
3, Set the Synchronize Starting Time and the Synchronization Period;
4, Click <Apply>.
Page 52
Browsing Alarms
Browsing Alarms:
Browsing Alarms includes:
1, Synchronizing Current Alarms.
2, Browsing Current Alarms.
3, Browse History Alarms.
4, Browsing Abnormal Events.
5, Browsing Alarm Statistics and Output Report.
Page 53
Browsing Alarms
Select [Fault/Browse
Current Alarm] from
the Main Menu
Page 54
Browsing Alarm/Performance
Browsing the SDH/OSN Series
Performance includes:
Browsing Alarms
Click one of the three alarm shortcut buttons:
critical alarm, major alarm or minor alarm.
Page 55
Routine Maintenance
Browsing the Operation Log
1, Select [System Administration/Operation
Log] from the Main Menu.
2, Select the browse conditions: Operation
Use, Record Type, Danger Severity, and
Range Selection.
3, Select the object choice at the upper right
area.
Page 56
Routine Maintenance
Equipment Data Collection
1, Select [System Administration/Equipment
Data Collection] from the Main Menu.
2, Select NEs and functions to be collected.
The equipment data include:
? Configuration data; ?
?
?
?
?
?
Equipment protection; ?
Equipment maintenance; ?
Alarm; ?
Performance;
Security.
Automatic Disabling of NE
Functions
1, Select [Configuration/Automatic
Disabling of NE Function] from the Main
Menu.
2, Select the appropriate NE and click the
double-right-arrow button (red). If
loopback or laser shutdown is enabled,
these functions will be displayed.
3, Keep the default status of auto disabling
unchanged and modify the value of "Auto
Disabling Time".
4, Click <Apply>.
Page 57
Troubleshooting
Loopback SDH/PDH/Ethernet interface and VC4/VC3 path
1.In the NE Explorer, select a board and select [Configuration/SDH Interface] from the Function
Tree. Click the double-right-arrow button (red) .
2, Select By function. Select Optical/Electrical Interface Loopback
3, Select the loopback mode and click <Apply>, then Click <OK>. The Operation Result dialog
box is displayed and indicates operation succeeded. Click <Close>
1, If you want to make a loopback for PDH/Ethernet or other interface, you can select
[Configuration/PDH Interface] or Interface Management/Ethernet Interface Loopback]
2, If you want to make a loopback for VC4/VC3 path, in the above figure, you can select
Select By function. Select VC4/VC3 loopback
HUAWEI TECHNOLOGIES CO., LTD.
Page 58
Troubleshooting
Warm Resetting and Cold
Resetting Unit
1,Open slot diagram;
2, Right-click the unit. Select
[Warm Reset] or [Clod Reset].
3, Click <OK> in the confirm
dialog box.
Page 59
Summary
Page 60
Thank You
www.huawei.com