Académique Documents
Professionnel Documents
Culture Documents
&+$37(5,1752'8&7,21
%DFNJURXQG
An Apartment can be defined as a structure with individual apartment units but a common
entrance and hallway. In apartment building the spaces themselves must be simple and
universal enough to adapt to a variety of life styles. It should be designed in such a way that
makes possible to move any room without crossing.
Some of the characteristics of Apartment Buildings:
a) Entering apartment: Outer clothing should be taken off the entrance like shoes,
umbrella.
b) Children coming in from play: children should be able to reach bathroom, bedroom
without crossing living room.
c) Delivery person should be paid without entering living room.
d) Passing from bedroom to bathroom
e) Passing from kitchen to bathroom
A well planned apartment is divided into living zone and sleeping zone, separated by the entry
hall. Equally important as the relation of each room to the other is the relative position it
occupies in relation to daylight and fresh air. Ideally, every room should have exterior
exposure to ensure light and air. This may however increase the perimeter of the building to
an extent that no one could afford to build it. Therefore bathrooms, invariably, kitchens, often
and dining rooms, are handled as interior spaces. Thus the apartment plan is divided into outer
and inner zones.
1HHGRI+LJK5LVH$SDUWPHQW%XLOGLQJ
High Rise Apartment buildings have recently developed in massive way in context to
Kathmandu Valley. The growing population and the decrement of land for residential
buildings lead to the apartment buildings. Today, Kathmandu is a rapidly urbanizing city with
building construction at just about every corner of the city that one can see. Kathmandu valley
is facing tremendous pressures on its population and infrastructures due to haphazard and
rapid urbanisation. The agricultural land has been converted into residential building and it is
increasing tremendously. Nevertheless, high rise building can be one of the solutions. High
Rise building is very justifiable in Kathmandu Valley as attempt to solve land use problems
by economizing precious urban territories used for service and utilization. This need for new
housing, considered against a background of continuing urbanization, clearly indicates that an
increasing proportion of an expanding housing market will be devoted to multifamily types of
housing or apartments. The inevitability of this trend contains a challenge to the architect to
do more than merely met a statistical demand.
The process of designing an apartment building may be graphically depicted in a general way
as shown in table.
Site analysis
Program development
PROGRAM
Market analysis
SITE
CONSIDERATION
ZONING
AND CODES
controls
BUILDING
CONFIGURATION
STRUCTUAL
SYSTEMS
concrete steel
limitations
systems
Building orientation
SERVICE
SPACES
FIRST FLOOR
ORGANIZATION
TYPICAL LIVING
UNIT DESIGN
TYPICAL FLOOR
DETERMINATIO
Refuse disposal
spatial requirement
guidelines
guidelines
Boiler room
ventilating
circulation core
use criteria
procedure
VERTICAL
SERVICING
elevators egress
plumbing
heating
cooling
Storage commercial
Laundry and community
Building design
and
Nepal is an earthquake prone region. Nearly 1/3rd of the Himalayan arc marking an active
plate boundary between Eurasian and Indian plates lies in the northern part of Nepal. This
earthquake was of such immense power that it resulted in the high peaks which now
characterize Nepal the Himalayas. Kathmandu valley, which is the capital of Nepal, has
been severely hit by earthquakes as strong as of magnitude 8.3 on Richter scale in the history
(1255, 1833 and 1934 earthquakes).
Many researchers have predicted the occurrence of strong earthquake in Kathmandu valley in
the near future. Nevertheless, most of the soil of Kathmandu valley is black cotton. Recent
years have seen an increase in the opportunities to High Rise Building in Kathmandu Valley
which lie within seismically active regions of the world. The question arises can the high rise
building resist in such seismically active zones?
. Designer deals with the design of civil engineering structures in a safe and economic way
and also the study of behavior of civil engineering structures under the effect of various kinds
of loads. Due consideration are given to the aesthetic and ecological aspects. A designer has
to deal with various structures ranging from simple ones like curtain rods and electric poles to
more complex ones like multistoried frame buildings, shell roofs bridges etc. these structure
are subjected to various load like concentrated loads uniformly distributed loads, uniformly
varying loads live loads, earthquake loads and dynamic forces. The structure transfers the
loads acting on it to the supports and ultimately to the ground. While transferring the loads
acting on the structure, the members of the structure are subjected to the internal forces like
axial forces, shearing forces, bending and torsional moments.
Structural Analysis deals with analyzing these internal forces in the members of the
structures. Structural Design deals with sizing various members of the structures to resist the
internal forces to which they are subjected during their effective life span. Unless the proper
Structural Detailing method is adopted the structural design will be no more effective. The
Indian Standard Code of Practice should be thoroughly adopted for proper analysis, design
and detailing with respect to safety, economy, stability and strength.
'HVFULSWLRQRI3URMHFW:RUN:
The projected selected by our group is an apartment building located at Bafal, Kathmandu.
According to IS 1893:2002, Kathmandu lies on Vth Zone, the severest one. Hence the effect of
earthquake is pre-dominant than the wind load. So, the building is analyzed for Earthquake as
lateral Load. The seismic coefficient design method as stipulated in IS 1893:2002 is applied to
analyze the building for earthquake. Special reinforced concrete moment resisting frame is
considered as the main structural system of the building.
The project report has been prepared in complete conformity with various stipulations in
Indian Standards, Code of Practice for Plain and Reinforced Concrete IS 456-2000, Design
Aids for Reinforced Concrete to IS 456-2000(SP-16), Criteria Earthquake Resistant Design
Structures IS 1893-2000, Ductile Detailing of Reinforced Concrete Structures Subjected to
Seismic Forces- Code of Practice IS 13920-1993, Handbook on Concrete Reinforcement and
Detailing SP-34, Reynolds Handbook. Use of these codes have emphasized on providing
sufficient safety, economy, strength and ductility besides satisfactory serviceability
requirements of cracking and deflection in concrete structures. These codes are based on
principles of Limit State of Design.
This project work has been undertaken as a partial requirement for B.E. degree in Civil
Engineering. This project work contains structural analysis, design and detailing of a high rise
apartment building located in Kathmandu District. All the theoretical knowledge on analysis
and design acquired on the course work are utilized with practical application. The main
objective of the project is to acquaint in the practical aspects of Civil Engineering. We, being
the budding engineers of tomorrow, are interested in such analysis and design of structures
which will, we hope, help us in similar jobs that we might have in our hands in the future.
7KHPHRI3URMHFWZRUN
This group under the project work has undertaken the computer aided analysis and design of
high rise apartment building. The main aim of the project work under the title is to acquire
knowledge and skill with an emphasis of practical application. Besides the utilization of
analytical methods and design approaches, exposure and application of various available
codes of practices is another aim of the work.
2EMHFWLYHVDQG6FRSHV
ii.
iii.
iv.
v.
vi.
%XLOGLQJ'HVFULSWLRQ
Building Type
Structural System
: 12574.65 ft2
Type of Foundation
: Mat Foundation
No. of Storey
: 11
Floor Height
Type of Sub-Soil
Expansion Joints
According to IS 456-2000, Clause 27, structures in which changes in plan dimensions take
place abruptly shall be provided with expansion joints at the section where such changes
occur. Reinforcement shall not extend across an expansion joints and the break between the
sections shall be completed. Normally structure exceeding 45m in length is designed with one
or more expansion joints.
The design is intended to serve for the following facilities in the building:-
Swimming pool
,GHQWLILFDWLRQRIORDGV
0HWKRGRI$QDO\VLV
The building is modeled as a space frame. SAP2000 is adopted as the basic tool for the
execution of analysis. SAP2000 program is based on Finite Element Method. Due to possible
actions in the building, the stresses, displacements and fundamental time periods are obtained
using SAP2000 which are used for the design of the members. Lift wall, mat foundation,
staircase, slabs are analyzed separately.
&RGHRISUDFWLFHV
Following codes of practices developed by Bureau of Indian Standards were followed in the
analysis and design of building:
1. IS 456:2000 (Code of practice for plain and reinforced concrete)
2. IS 1893 (part 1):2002 (Criteria for earthquake resistant design of structures)
3. IS 13920: 1993 (Code of practice for ductile detailing of reinforced concrete structures
subjected to seismic forces)
4. IS 875 (part 1):1987 (to assess dead loads)
5. IS 875 (part 2):1987 (to assess live loads)
6. IS 875 (part 5):1987 (for load combinations)
7. SP 16, SP 24 and SP 34 (design aids and hands book)
'HVLJQ
The following materials are adopted for the design of the elements:
Limit state method is used for the design of RC elements. The design is based on IS:456-2000,
SP-16, IS:1893-2002, SP-34 and Reinforced Concrete Designers Handbook- Charles E.
Reynolds and James C. Stedman are extensively used in the process of design.
'HWDLOLQJ
The space frame is considered as a special moment resisting frame(SMRF) with a special
detailing to provide ductile behavior and comply with the requirements given in IS 139201993, Hand book on Concrete Reinforcement and Detailing (SP-34) and Reinforced Concrete
Detailers Manual- Brian W. Boughton and Reinforced Concreter Designers HandbookCharles E. Reynolds and James C. Stedman ( for Helicoidal Staircase) are extensively used.
'LVWULEXWLRQRI&KDSWHU
This project has been broadly categorized into five chapters, Summery of each chapter are
mention below:
Chapter 1
: Introduction
Chapter 2
Chapter 3
Load assessment
It deals with the assessment of gravity and earthquake loads acting or likely to
be acted on the building.
Chapter 4
inputs given and outputs obtained in the process, the time period calculation
and storey drift of the building.
Chapter 5
Chapter 6
Chapter 7
6WUXFWXUDO6\VWHPV
$ny structure is made up of structural Elements Load carrying, such as beams and
columns and non structural elements (such as partitions, false ceilings, doors). The
structural elements put together, constitute the structural systems. Its function is to resist
effectively the action of gravitational and environmental loads, and to transmit the resulting
forces to the supporting ground without significantly disturbing the geometry, integrity and
serviceability of the structure.
6WUXFWXUDO$UUDQJHPHQW3ODQ
The planning of the building has been done as per available land area, shape, space according
to building bylaws and requirement of commercial public building. The positioning of
columns, staircases, toilets, bathrooms, elevators etc are appropriately done and accordingly
Beam arrangements is carried out so that the whole building will be aesthetically, functionally
and economically feasible.
The aim of design is the achievements of an acceptable probability that structures being
design will perform satisfactorily during their intended life. With an appropriate degree of
safety, they should sustain all the loads and deformations of normal construction and use and
have adequate durability and adequate resistance to the effect of misuse and fire.
1HHGRI3UHOLPLQDU\GHVLJQ
It is necessary to know the preliminary section of the structure for the detail analysis. As the
section should be given initially while doing analysis in every softwares, the need of
preliminary design is vital. Only dead loads and live loads are considered while doing
preliminary design.
Preliminary design is carried out to estimate approximate size of the structural members
before analysis of structure. Grid diagram is the basic factor for analysis in both Approximate
and Exact method and is presented below.
3UHOLPLQDU\ORDGFDOFXODWLRQ
9HUWLFDO/RDG&DOFXODWLRQ
5RRI
D6ODE
Dead Load
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
Imposed Load
For roof
= 1.5 KN/m2
E%HDP
Dead load
Self weight of beam
= 250.25045
= 2.81 KN/m
= 0.9 x 0.6 x 25
= 13.5 KN/m
F&ROXPQ
Rectangular
7\SLFDOIORRU
D6ODE
Dead Load
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
Imposed Load
For typical floor
= 3 KN/m2
b) Beam
Dead load
Self weight of beam
= 250.30.5
= 3.38 KN/m
F&ROXPQ
Rectangular
= 0.9 x 0.6 x 25
= 13.5 KN/m
)LUVWIORRU
D6ODE
Dead Load
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
Imposed Load
For roof
= 5 KN/m2
E%HDP
Dead load
Self weight of beam
= 250.30.5 5
= 3.75 KN/m
= 0.9 x 0.6 x 25
= 13.5 KN/m
F&ROXPQ
Rectangular
%DVHPHQW
D6ODE
Dead Load
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
Imposed Load
For roof
= 5 KN/m2
b) Beam
Dead load
Self weight of beam
= 250.350.55
= 4.38 KN/m
= 0.9 x 0.6 x 25
= 13.5 KN/m
F&ROXPQ
Rectangular
6WDLUFDVH
Dog Legged
Total thickness
= 160 mm
Riser
= 180 mm
Tread
= 300 mm
= 0.25 x 25
= 6.250 KN/m2
= 0.675 KN/m
Wt. of landing
= 0.25 x 25
= 6.250 KN/m2
Wt. of finishing
Imposed load
= 5 KN/m2
3UHOLPLQDU\'HVLJQ
3UHOLPLQDU\'HVLJQRI6ODE
7DEOH
5HI
6WHS
6ODE,'
Interior panel
522)
6
Clear Spans
Lx=6 m
Ly=6 m
=26
=1
=1.65
=1.05
=1
Design Load
Moment Calculation
,6
7DEOH
,6
$QQH[
'
$QQH[
'
&DOFXODWLRQV
Shorter Span
Depth of slab, (d ) =
d=
2XWSXW
6000
= 133 mm Say D = 160 mm
26 x1.65 * 1.05
'
PP
x= -0.032, y= -0.032
x= 0.024, y= 0.024
Support moment ,Ms = - xwlx2 = -0.032x 8.25 x 62 = -9.50 KNm
Mid span moment ,Mm = ywlx2 = 0.032 x 8.25 x 62 = -9.50 KNm
Check for depth from Moment Consideration
Depth of Slab,d =
G
PP
M max
9.5 x 10
=
= 48 mm <
0.138fck x b
0.138 x 30 x1000
133mm
7\SLFDOIORRUVODE
7DEOH
5HI
6WHS
6ODE,'
Interior panel
6
Clear Spans
Lx=6 m
Ly=6 m
=26
=1
=1.65
=1.05
=1
Design Load
Moment Calculation
,6
7DEOH
&DOFXODWLRQV
Depth of slab, (d ) =
d=
2XWSX
W
Shorter Span
6000
= 133 mm
26 x1.65 * 1.05
G
PP
'
PP
Say D = 160 mm
x= -0.032, y= -0.032
+ve Bending moment coefficient at mid span
x= 0.024, y= 0.024
,6
$QQH[
'
$QQH[
'
M max
12.1x 10
=
= 54 mm >133mm
0.138fck x b
0.138 x 30 x1000
)LUVWIORRUVODE
7DEOH
5HI
6W
HS
6ODE,'
Interior panel
6
Clear Spans
Lx=6 m
Ly=6 m
=26
=1
=1.65
=1.05
=1
Design Load
Moment Calculation
,6
7DEOH
,6
$QQH[
'
$QQH[
'
&DOFXODWLRQV
Depth of slab, (d ) =
d=
2XWSXW
Shorter Span
G
PP
6000
= 133 mm
26 x1.65 * 1.05
Say D = 160 mm
'
PP
x= -0.032, y= -0.032
x= 0.024, y= 0.024
Support moment ,Ms = - xwlx2 = -0.032x 13.5 x 62 = -15.6 KN-m
Mid span moment ,Mm = ywlx2 = 0.032 x 13.5 x 62 =-15.6 KN-m
Check for depth from Moment Consideration
Depth of Slab,d =
M max
15.6 x 10
=
= 61.4 mm <
0.138fck x b
0.138 x 30 x1000
133mm
%DVHPHQWIORRU
7DEOH
5HI
6WHS
6ODE,'
Interior panel
6
Clear Spans
Lx=6 m
Ly=6 m
=26
=1
=1.65
=1.05
=1
Design Load
Moment Calculation
,6
7DEOH
&DOFXODWLRQV
Depth of slab, (d ) =
d=
Shorter Span
6000
= 133 mm
26 x1.65 * 1.05
Say D = 160 mm
x= -0.032, y= -0.032
+ve Bending moment coefficient at mid span
x= 0.024, y= 0.024
Support moment ,Ms = - xwlx2 = -0.032x 13.5 x 62 = -15.6 KNm
,6
$QQH[
'
$QQH[
'
2XWSX
W
Depth of Slab,d =
M max
15.6 x 10 6
=
= 61.4 mm < 133mm
0.138fck x b
0.138 x 30 x1000
G
PP
'
PP
3UHOLPLQDU\'HVLJQRI%HDP
5RRI%HDP
7DEOH
5HI
6WHS
5RRI
%HDP$OR
QJ$%
&
Deflection Criteria
Beam size-250mm*450 mm
Now,
,6
$QQH[
'
&DOFXODWLRQV
2XWSXW
l
ratio
d
6000
= 13.33 15(Okay)
450
Depth of Beam,d =
M max
147.60 x 10 6
=
= 377.63 mm < 450mm(Okay)
0.138fck x b
0.138 x 30 x 250
'
PP
7\SLFDOIORRUEHDP
7DEOH
5HI
6WHS
Deflection Criteria
7\SLFDO
IORRU
EHDPDOR
QJ$%
&
Beam size-350mm*500 mm
Now,
,6
$QQH[
'
&DOFXODWLRQV
l
ratio
d
6000
=
= 13.33 15(Okay)
450
2XWSXW
Depth of Beam,d =
M max
164.12 x 10 6
=
= 363.51 mm <
0.138fck x b
0.138 x 30 x 300
450mm(Okay)
'
PP
)LUVWIORRUEHDP
7DEOH
5HI
6WHS
)LUVWIORRU
EHDP$OR
QJ$%
&
Deflection Criteria
Beam size-350mm*500 mm
Now,
,6
$QQH[
'
&DOFXODWLRQV
l
ratio
d
6000
= 12 15(Okay)
500
2XWSXW
Depth of Beam,d =
M max
202.93 x 10 6
=
= 374.23 mm <
0.138fck x b
0.138 x 30 x 350
500mm(Okay)
' PP
%DVHPHQWIORRUEHDP
7DEOH
5HI
6WHS
%DVHPHQW
IORRU
EHDP$OR
QJ($
%&
'
Deflection Criteria
Beam size-350mm*550 mm
Now,
,6
$QQH[
'
&DOFXODWLRQV
l
ratio
d
6000
=
= 10.90 15(Okay)
550
2XWSXW
Depth of Beam,d =
M max
227.61 x 10 6
=
= 396.33 mm <
0.138fck x b
0.138 x 30 x 350
550mm(Okay)
' PP
'HVLJQRIFROXPQ
5HFWDQJXODUFROXPQ
7DEOH
5HIHUHQFH
6WHS
Axial column
&DOFXODWLRQV
2XWSXW
900mm
Known data:
Height, L = 3.048m
L
= 3.38 Hence the column can be designed as short.
D
Calculation:
,6
FOD
600mm
7565.02=0.430(1-0.008) Ag+0.674150.008 Ag
Ag=535447.75mm2
Take B=600mm
Then,
' PP
D=892.4mm900mm
% PP
63
/ P
&LUFXODU&ROXPQ
5HIHUHQFH
7DEOH
6WHS
&DOFXODWLRQV
2XWSXW
Known data:
Height, L = 3.048m
6
FO
,6
63
400
400mm
L
= 7.62 Hence the column can be designed as
D
short.
Calculation:
Factored Axial Load, Pu = 610.56 KN
FOD
' PP
/ P
5HFWDQJXODUFROXPQHQG
7DEOH
Calculations
2XWSXW
Biaxial Column
5HIHUHQFH
6WHS
-101.5 KNm
350mm
101.5 KNm
350mm
Known data:
Axial load =237.79KN
Calculation:
Design for section:
'HVLJQRIFROXPQIRU0D[0RPHQW
356.7=0.430(1-0.008) Ag+0.674150.008 Ag
Ag=25247mm2
Take B=350mm
' PP
Then,
% PP
D=350mm
/ P
'HVLJQRI6WDLUFDVH
7DEOH
5HI
6WHS
&DOFXODWLRQV
2XWSXW
6ODE,'
Interior panel
6
Clear Spans
Lx=6 m
Ly=1.5m
=26
=1
=1.65
=1.05
=1
Design Load
Dead of flight
d=
G PP
6000
= 133 mm
26 x1.65 * 1.05
' PP
Say D = 160 mm
Calculating area
Step section =0.3*0.15/2=0.0225m2
Inclined slab = .335*.16=.0536m2
Finish =\(.15+.3)*.015=.0135m2
Landing load
M max
70.254 x 10 6
=
= 106.36mm
4.14 x b
4.14 x 1500
'HVLJQRI)RXQGDWLRQ
Reference
7DEOH
Steps
Result
Table 1(1.i.e)
From I.R.C
Mat foundation
&+$37(5/2$'$66(660(17
,QWURGXFWLRQ
As described earlier, the building is a RCC framed structure, located in the Kathmandu valley.
Thus wind loads, snow loads, and other special types of loads described by IS 875 (part
5):1987 can be taken as negligible as compared to the dead, live and seismic loads.
'HDG/RDGV
According to the IS 875:1964:
The dead load in a building shall comprise the weights of all walls, partitions, floors and roofs
and shall include the weights of all other permanent features in the building.
/LYH/RDGV
It means the load assumed or known resulting from the occupancy or use of a building and
includes the load on balustrades and loads from movable goods, machinery and plant that are
not an integral part of the building.
6HLVPLF/RDGV
These are the load resulting from the vibration of the ground underneath the superstructure
during the earthquake. The earthquake is an unpredictable natural phenomenon. Nobody
knows the exact timing and magnitude of such loads. Seismic loads are to be determined
essentially to produce an earthquake resistant design.
Seismic loads on the building may be incorporated by1. 5HVSRQVH VSHFWUXP PHWKRG In this method the design earthquake forces are
determined adopting IS 1893:2002. These design forces for the buildings located along
two perpendicular directions may be assumed to act separately along each of these two
horizontal directions.
8QLW:HLJKWVIRU'HDG/RDG&DOFXODWLRQ
1. RCC: (IS 875 (part 1) :1987 table 1)
a) For slabs and shear walls:
RCC = 25 KN/m3
b) For columns:
RCC = 25 KN/m3
c) For Beams: RCC = 25 KN/m3
2. Plaster (12mm thickness):
5. Cement punning:
/LYHORDGV
1. On floors: (IS 875 (part 2): 1987 table 1, (iii))
2. On Partition walls: Live Load = 1 KN/m2
(Assuming a minimum live load as per IS 875 (part 2): 1987, 3)
3. On roof slabs and slab projections: Live load = 0.75 KN/m2
9HUWLFDO/RDG&DOFXODWLRQ
)RUGHDGORDG
5RRI
D6ODE
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
E%HDP
Dead load
Self weight of beam
= 250.25045
= 2.81 KN/m
= 0.9 x 0.6 x 25
= 13.5 KN/m
F&ROXPQ
Rectangular
7\SLFDOIORRU
D6ODE
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
E%HDP
Dead load
Self weight of beam
= 250.30.5
= 3.38 KN/m
F&ROXPQ
Rectangular
= 0.9 x 0.6 x 25
= 13.5 KN/m
)LUVWIORRU
D6ODE
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
E%HDP
Dead load
Self weight of beam
= 250.30.5 5
= 3.75 KN/m
= 0.9 x 0.6 x 25
= 13.5 KN/m
F&ROXPQ
Rectangular
%DVHPHQW
D6ODE
Self Weight of the slab= 160 mm x 25 KN/m3
= 4 KN/m2
Plaster
= 25 mm x 20 KN/m3
= 0.51 KN/m2
Finishes
= 25 mm x 26.70 KN/m3
= 0.67 KN/m2
= 5.18 KN/m2
Total
E%HDP
Dead load
Self weight of beam
= 250.350.55
= 4.38 KN/m
= 0.9 x 0.6 x 25
= 13.5 KN/m
F&ROXPQ
Rectangular
6WDLUFDVH
Dog Legged
Total thickness
= 160 mm
Riser
= 180 mm
Tread
= 300 mm
= 0.25 x 25
= 6.250 KN/m2
= 0.675 KN/m
Wt. of landing
= 0.25 x 25
= 6.250 KN/m2
Wt. of finishing
Imposed load
= 5 KN/m2
6HLVPLF/RDG
Seismic weight is the total dead load plus appropriate amount of specified imposed
load. While computing the seismic load weight of each floor, the weight of columns and walls
in any story shall be equally distributed to the floors above and below the storey. The seismic
weight of the whole building is the sum of the seismic weights of all the floors. It has been
calculated according to IS: 1893(Part I) 2002.
IS: 1893(Part I) 2002 states that for the calculation of the design seismic forces of
the structure the imposed load on roof need not be considered
The seismic weights and the base shear have been computed in table
%DVH6KHDU&DOFXODWLRQ
According to IS 1893 (Part I): 2002 Cl. No. 6.4.2 the design horizontal seismic
coefficient Ah for a structure shall be determined by the following expression:
Ah =
Z I Sa
2R g
Where,
Z = Zone factor given by IS 1893 (Part I): 2002 Table 2, Here for Zone V, Z =
0.36
I = Importance Factor, I = 1.5 for commercial building
R = Response reduction factor given by IS 1893 (Part I): 2002 Table 7, R = 5.0
Sa/g = Average response acceleration coefficient which depends on
Fundamental natural period of vibration (Ta).
For T = 0.8 and soil type IV (Soft Soil) Sa/g = 1.67/0.869797
=1.92
Now,
The design horizontal seismic coefficient,
Ab=
ZISa
2 Rg
Ah =
0.36x1.5x2.05916
=0.10368
2 x5
According to IS 1893 (Part I) : 2002 Cl. No. 7.5.3 the total design lateral force or
design seismic base shear (VB) along any principle direction is given by
VB = Ah x W
Where, W = Seismic weight of the building=102752.62KN
VB = 0.1*102086.67 = 1. KN
The total base shear is firstly distributed horizontally in basement in proportion to the
stiffness. Then according to IS 1893 (Part I): 2002 Cl. No. 7.7.1 the design base shear (VB)
computed above shall be distributed along the height of the building as per the following
expression:
Qi = VB
Wi h i2
n
Wj h 2j
j=1
Where,
Qi = Design lateral force at floor i
Qi = VB
Wi h i2
n
Wj h 2j
j=1
Where,
Qi = Design lateral force at floor i
Wi = Seismic weight of floor i
hi = Height of floor I measured from base
n = No. of storeys in the building
W5
W5
W4
W4
W3
W3
W2
W2
W1
W1
6WRUH\6KHDULQ;'LUHFWLRQ
6WRUH\6KHDULQ<'LUHFWLRQ
$GGLWLRQDO6KHDU&DOFXODWLRQ'XHWR7RUVLRQLQ%XLOGLQJ
Center of Rigidity (CR) - A point through which a horizontal force is applied resulting in
translation of the floor without any rotation
)URP,6
= 1 .5 ,
= 0.05
and
=1
&DOFXODWLRQE\6LPSOLILHG$QDO\VLV
The location of the center of rigidity is determined by
xr =
k x
k
y
And y r =
kx = 3
EI
L3
And k y = 3
k y
k
x
EI
L3
Where kx and ky are lateral stiffness of a particular element along the x and y axes.
E= Youngs Modulus of rigidity
I= Moment of Inertia
L= Length of the Member
The total torsional stiffness of a storey Ip about the center of rigidity is given by
I p = (k x y 2 + k y x 2 )
Where,
x , y = coordinates of the centroid of a particular element in plan from
The additional shear on any frame on column line to a horizontal torsional moment T is given
by
Vx' =
Vy' =
Tx y
k xx
Ip
Ty x
Ip
k yy
Where, Vx' = Additional shear on any frame or column line in the x-direction
due to torsional moment
Vx = initial storey shear in x-direction due to lateral forces
Tx = Vx e y , torsional moment due to lateral force in x-direction only
Kxx = total stiffness of the column line under consideration in the xdirection.
The subscript y represents y-direction.
5HVSRQVHVSHFWUXP$QDO\VLV
The response history analysis provides structural response r(t) as a function of time, but the
structural design is usually based on the peak values of forces and deformations over the
duration of the earthquake induced response. The peak response can be determined directly
from the response spectrum for the ground motion in case of single degree of freedom. The
peak response of multi degree freedom systems can be calculated from the response spectrum.
The exact peak calue of the nth mode response rn(t) =-rnstAn
Where An is the ordinate of the pseudo acceleration spectrum corresponding to natural period
Tn and damping ratio
The peak value ro of the total response can be estimated by combining the modal peaks rno
according to one of the modal combination rules. Because the natural frequencies of
transverse vibration of a beam are well separated, the SRSS combination rule is satisfactory.
Thus,
5R
2
rno
n ~1
/RDG&RPELQDWLRQ
Different load cases and load combination cases are considered to obtain most critical element
stresses in the structure in the course of analysis.
There are together four load cases considered for the structural analysis and are mentioned as
below:
i.)
ii.)
iii.)
iv.)
v.)
vi.)
Following Load Combination are adopted as per IS 1893 (Part I): 2002 Cl. No. 6.3.1.2
i.)
ii.)
iii.)
iv.)
v.)
vi.)
vii.)
viii.)
ix.)
x.)
xi.)
xii.)
xiii.)
xiv.)
xv.)
xvi.)
xvii.)
xviii.)
xix.)
xx.)
xxi.)
After checking the results, it was found that the stresses developed are most critical for the
following load combinations:
i.)
ii.)
iii.)
iv.)
v.)
vi.)
vii.)
viii.)
ix.)
&+$37(502'(/,1*$1'6758&785$/
$1$/<6,6
6DOLHQWIHDWXUHRI6$3
SAP2000 represents the most sophisticated and user-friendly release of SAP series of
computer programs. Creation and modification of the model, execution of the analysis, and
checking and optimization of the design are all done through this single interface. Graphical
displays of the results, including real-time display of time-history displacements are easily
produced.
The finite element library consists of different elements out of which the three dimensional
FRAME element was used in this analysis. The Frame element uses a general, threedimensional, beam-column formulation which includes the effects of biaxial bending, torsion,
axial deformation, and biaxial shear deformations.
Structures that can be modeled with this element include:
Three-dimensional frames
Three-dimensional trusses
Planar frames
Planar grillages
Planar trusses
A Frame element is modeled as a straight line connecting two joints. Each element has its
own local coordinate system for defining section properties and loads, and for interpreting
output.
Each Frame element may be loaded by self-weight, multiple concentrated loads, and multiple
distributed loads. End offsets are available to account for the finite size of beam and column
intersections. End releases are also available to model different fixity conditions at the ends of
)LJ0RGHOE\6$3
the element. Element internal forces are produced at the ends of each element and at a userspecified number of equally-spaced output stations along the length of the element.
Loading options allow for gravity, thermal and pre-stress conditions in addition to the usual
nodal loading with specified forces and or displacements. Dynamic loading can be in the form
of a base acceleration response spectrum, or varying loads and base accelerations.
,QSXWVDQG2XWSXWV
The design of earthquake resistant structure should aim at providing appropriate dynamic
and structural characteristics so that acceptable response level results under the design
earthquake. The aim of design is the achievement of an acceptable probability that structures
being designed will perform satisfactorily during their intended life. With an appropriate
degree of safety, they should sustain all the loads and deformations of normal construction
and use and have adequate durability and adequate resistance to the effects of misuse and fire.
For the purpose of seismic analysis of our building we used the structural analysis program
SAP2000. SAP2000 has a special option for modeling horizontal rigid floor diaphragm
system.
A floor diaphragm is modeled as a rigid horizontal plane parallel to global X-Y plane, so that
all points on any floor diaphragm cannot displace relative to each other in X-Y plane.
This type of modeling is very useful in the lateral dynamic analysis of building. The base
shear and earthquake lateral force are calculated as per code IS 1893(part1)2002 and are
applied at each master joint located on every storey of the building
-RLQW'LVSODFHPHQWDW([SDQVLRQ-RLQW
After the analysis of structure using SAP2000 the maximum displacement of nodes at the
expansion joint was found out. It is clear from table below that the available gap for
expansion joint is much greater relative displacement of the nodes at joint. In order to reduce
the pounding effect between the two units, the adequte spacing is provided. The separation
between the adjacent units of the same buildings in between shall be separated by a distance
equal to the amount R times the sum of the calculated storey displacements to avoid the
damaging contact when the two units deflect towards each other. Since the elevation levels of
both units are same in our case the factor R is replaced by R/2. Hence the building will not
collide at the expansion joint during earthquake condition.
Table 13
&DOFXODWLRQRIGULIWDQGVSDFLQJIRUH[SDQVLRQ
Along X
Along X
Max DisplacemenRelative
Floor
Top
Bottom
Max DisplacemenRelative
Drift
Displacement
Bottom Top
Drift
Displacement
0 0.003
0.00331
0.0009457
0.003
0.0027 0.00077
0.00418
0.0011943
0.0027
0.01
0.0072 0.00206
0.00749 0.019
0.01191
0.00397
0.0099
0.021
0.011 0.00367
First
0.0194 0.031
0.0119
0.0039667
0.0209
0.033
0.0118 0.00393
Second
0.0313 0.043
0.0118
0.0039333
0.0327
0.045
0.0119 0.00397
Third
0.0431 0.055
0.0119
0.0039667
0.0446
0.056
0.0118 0.00393
Fourth
0.055 0.067
0.0118
0.0039333
0.0564
0.068
0.0113 0.00377
0.0668 0.078
0.01121
0.0037367
0.0677
0.08
0.0118 0.00393
0.09
0.01199
0.0039967
0.0795
0.091
0.0117
0.406
0.0912 0.0299
Basement
Ground
Fifth
Sixth
Total
0.07801
0.39
0.09 0.0296433
0.0039
&KDSWHU6(&7,21'(6,*1
/LPLWVWDWH0HWKRG
In the method if design based on limit state concept, the structure shall be designed to
withstand safely all loads liable to act on it throughout its life; it shall also satisfy the
serviceability requirements, such as limitations on deflection and cracking. The acceptable
limit for the safety and serviceability requirements before failure occurs is called a limit
state. The aim of design is to achieve acceptable probabilistic that the structure will not
become unfit for the use for which it is intended, that is, that it will not reach a limit state.
Plane sections normal to the axis of the member remain plane after bending.
ii)
iii)
The relationship between the compressive stress distribution in concrete and the
strain in concrete may be assumed to be rectangle, trapezoidal, parabola or any other
shape which results in prediction of strength in substantial agreement with the result
of test. For design purposes, the compressive strength of concrete in the structure
shall be assumed to be 0.67 times the characteristic strength. The partial safety factor
v)
vi)
The maximum strain in the tension reinforcement in the section at failure shall not
be less than:
fy
1.15Es
+ 0.002
ii.)
extreme fiber.
The limiting values of the depth of neutral axis for different grades of steel based on
the assumptions are as follows:
Fy
xu,max
250
0.53
415
0.48
500
0.46
After analyzing the given structure using the software SAP2000 the structural elements are
designed by Limit state Method. Account should be taken of accepted theories, experiment,
experience as well as durability.
The code we use for the design is IS456-2000; IS1893-2002, IS13920-1993 and Design aids
are SP16 and SP34. Suitable material, quality control, adequate detailing and good
supervision are equally important during implementation of the project.
&RPSXWHU$LGHG'HVLJQ
Computer aided design is the method of analyzing and designing any structure with the help
of various general use softwares and some particularly designed softwares made by using
some popular programming languages like visual basic, C++,etc.
In present time most of the building analysis and design is done by using computers. Basically
analysis and design based softwares like SAP, STAAD, etc are available in market. These
types of softwares are easy to use and can provide analysis results of complicated structures in
the matter of minutes which if calculated manually would take months.
Methodology
1. Analysis of building was done by using SAP 2000.
2. Design of slab was done by analyzing the slab of each floor on SAP 2000 in a separate
model.
3. For beam design, analysis result from SAP 2000 was arranged by using a small
program made from Visual Basics, which extracts data from SAP analysis and
arranges the required data.
4. Now beam was designed by using EXCEL and required reinforcement was calculated.
5. In case of columns, we used the design data from SAP.
6. All the other structural members were designed manually.
A sample program for extracting the data from SAP 2000 of the beam.
'HVLJQRIVWUXFWXUDOHOHPHQWV
The design includes design for durability, construction and use in service should be considered
as a whole. The realization of design objectives requires compliance with clearly defined
standards for materials, workmanship, and also maintenance and use of structure in service.
This chapter includes all the design process of sample calculation for a single element as slab,
beam, column, staircases, basement wall, lift wall, ribbed slab and mat foundation.
i.) Design of slab
ii.) Design of Beam
iii.) Design of Column
iv.) Design of Staircase
v.) Design of Basement Wall
vi.) Design of Lift Wall
vii.) Design of Mat and Foundation
L
5HI
5HI
'HVLJQRIVODE
Table 14
6WH
&DOFXODWLRQV
&DOFXODWLRQV
2XWSXW
2XWSXW
S
6ODE,'
6ODE,'
,QWHULRUSDQHO
%%&&
%%&&
7KLFNQHVVRIVODEDQGGXUDELOLW\FRQVLGHUDWLRQ
7KLFNQHVVRIVODEDQGGXUDELOLW\FRQVLGHUDWLRQ
&OHDU6SDQV
/[ P
/\ P
$VVXPLQJFOHDUVSDQFRYHU PP
3URYLGLQJPPEDU
7DNH' PP
(IIHFWLYHOHQJWK
ly
6HOIORDGRIVODE [
3ODVWHU .1P
0DUEOH .1P
,QQHUSODVWHU .1P
3DUWLWLRQZDOOORDG
/LYHORDG .1P
&RQVLGHULQJXQLWZLGWKRIVODEZ .1P
Depth of slab, (d ) =
d=
Shorter Span
6140
PP
26 x 1.65 * 1.05
6D\' PP
6LQFH
G PP
PP
' PP
PP
6140
=
= 1 < 2 'HVLJQDVWZR:D\6ODE
6140
lx
O[ PP
PP
O\ PP
PP
'HVLJQ/RDG
'HVLJQ/RDG
.1P
.1P
,6
0RPHQW&DOFXODWLRQ
0RPHQW&DOFXODWLRQ
YH%HQGLQJPRPHQWFRHIILFLHQWDWFRQWLQXRXVHGJH
7DEOH
7DEOH
[ \
,6
YH%HQGLQJPRPHQWFRHIILFLHQWDWPLGVSDQ
[ \
$QQH[
)RU6KRUW6SDQ
'
'
$QQH[
.1P
'
'
)RU/RQJ6SDQ
$QQH[
'
'
.1P
$QQH[
'
'
&KHFNIRUGHSWKIURP0RPHQW&RQVLGHUDWLRQ
&KHFNIRUGHSWKIURP0RPHQW&RQVLGHUDWLRQ
&DOFXODWLRQRI$UHDRI6WHHO
$UHDRI6WHHODORQJVKRUWVSDQ
$UHDRI6WHHODWVXSSRUW7RS%DUV
UHDRI6WHHODWVXSSRUW7RS%DUV
,6
$QQH[
*
*
PP!0LQ$VW
3URYLGLQJPPEDUV
$E
,6
FO
FO
3W
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
PP
'HSWKRI6ODEG
$VW 0.5
M max
=
4.14 x b
18.66 x106
= 67.13 mm
4.14 x1000
f ck
4 .6 M u
(1 1
)bd
fy
f ck bd 2
30
4.6 x18.66 x106
(1 1
) x 1000 x136
0.5 x
415
30 x1000 x136 2
PP
6SDFLQJRI%DUV6Y
78.5
Ab
x1000 PP
x1000
A st
399.7
3URYLGHPP#PPFF
$FWXDO$VW
Ab
78.5
x1000 =
x1000 = 413.2 PP
Sv
190
G PPP
PPP
P
0LQ$VW PP
6ROYHG(T IRU$VW
IRU$VW
6SDFLQJ2.
6SDFLQJ2.
PP#PP
FF
FF
$FW$VW
,6
$QQH[*
QQH[*
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E
3W
$UHDRI6WHHO$ORQJ/RQJ6SDQ
$UHDRI6WHHO$ORQJ/RQJ6SDQ
,6
f ck
4 .6 M u
(1 1
)bd
fy
f ck bd 2
$QQH[*
$QQH[*
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
3W
$UHDRI6WHHODW0LG6SDQ%RWWRP%DUV
$UHDRI6WHHODW0LG6SDQ%RWWRP%DUV
,6
$QQH[*
$QQH[*
*E
E
$VW 0.5
f ck
4 .6 M u
(1 1
)bd
fy
f ck bd 2
6ROYHG(T IRU$VW
PP
6SDFLQJRI%DUV6Y
78.5
Ab
x1000 PP
x1000
A st
296
3URYLGHPP#PPFF
$FWXDO$VW
Ab
78.5
x1000 =
x1000 = 302 PP
Sv
260
6SDFLQJ2.
6SDFLQJ2.
PP#PP
FF
FF
$FW$VW PP
$VW 0.5
30
4.6 x16.87 x106
(1 1
) x 1000 x138
0.5 x
415
30 x1000 x1382
6SDFLQJRI%DUV6Y
Ab
50.26
x1000 PP
x1000
358.14
A st
3URYLGHPP#PPFF
$FWXDO$VW
$VW 0.5
Ab
50.26
x1000 =
x1000 = 359 PP
Sv
140
f ck
4 .6 M u
(1 1
)bd
fy
f ck bd 2
30
4.6 x12.77 x106
(1 1
) x 1000 x138
0.5 x
415
30 x1000 x1382
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
3W
,6
&KHFNIRU6KHDU
&KHFNIRU6KHDU
)RU[GLUHFWLRQLHVKRUWVSDQ
$QQH[*
$QQH[*
*E
E
6KHDUDWFULWLFDOVHFWLRQ
.1.1
G P
P
Vu
47.5
=
3.07 3.07 0.136
9X .1
+HUHWHQVLRQUHLQIRUFHPHQWRIVODEFRQWULEXWHLQVKHDU
,6
)RUSW
c = 0.37 1PP
7DEOH
7DEOH
FO
FO
&KHFNIRU'HIOHFWLRQ
&KHFNIRU'HIOHFWLRQ
$ORQJVKRUW6SDQ
6LQFHERWKHQGVDUHFRQWLQXRXVWKHEDVLFYDOXHPD\EHWDNHQDV
6SDFLQJRI%DUV6Y
Ab
50.26
x1000 PP
x1000
267.17
A st
3URYLGHPP#PPFF
$FWXDO$VW
Ab
50.26
x1000 =
x1000 = 279.22 PP
Sv
180
6KHDU IRUFH DW WKH IDFH RI WKH VXSSRUW 9 Z O\ [
6.14
2
.1
N c EG
9X .1
.1
c =
1PP
+HQFH6DIH
+HQFH6DIH
,6
FO
FO
,6
3W
)LJ
)LJ
&KHFNIRU'HYHORSPHQW/HQJWK
&KHFNIRU'HYHORSPHQW/HQJWK
IV 0.58 f y
296
Area of Steel Re quired
[[
Area of Steel Pr ovided
302
1PP
GSHU
/G
GSHUG+HQFH
lx
6140
=
= 134.9 PPGSURYLGHG
M .F . x Basic Value 1.75 x 26
s
1.6 x 4 x bd
6DIH
6DIH
x 0.87 x 415
= 40.3
1.6 x 4 x 1.4
Ld
M1
+ Lo
V
)RU6KRUW6SDQ
M1
+ Lo
V
,6
18.66
'LVWULEXWLRQ%DUV
'LVWULEXWLRQ%DUV
FO
FO
+HQFH6DIH
+HQFH6DIH
Ab
x 1000
A sd
$VG PP
78.5
x 1000 PP
192
3URYLGHPP#PPFF
$FW$VW
Ab
x 1000
Sv
$FW$VG
78.5
x 1000 = 196.3 PP
400
PP
7RUVLRQ5HLQIRUFHPHQW
6LQFHWKLVLVLQWHULRUSDQHOQRQHHGRIWRUVLRQUHLQIRUFHPHQW
&XUWDLOPHQWRI5HLQIRUFHPHQW
&XUWDLOPHQWRI5HLQIRUFHPHQW
&XUWDLOPHQW LV GRQH E\ DV SHU VLPSOLILHG PHWKRG DQG ,QGLDQ
6WDQGDUG&RGH,663
Table 15
5HI
5HI
6WHS
6WHS
&DOFXODWLRQV
&DOFXODWLRQV
6ODE,'
6ODE,'
,QWHULRUSDQHO
$$%%
$$%%
7KLFNQHVVRIVODEDQGGXUDELOLW\FRQVLGHUDWLRQ
7KLFNQHVVRIVODEDQGGXUDELOLW\FRQVLGHUDWLRQ
&OHDU6SDQV
/[ P
/\ P
$VVXPLQJFOHDUVSDQFRYHU PP
3URYLGLQJPPEDU
7DNH' PP
(IIHFWLYHOHQJWK
Depth of slab, (d ) =
d=
Shorter Span
6140
PP
26 x 1.65 * 1.05
6D\' PP
6LQFH
ly
lx
2XWSXW
2XWSXW
G PP
PP
' PP
PP
O[ PP
PP
7140
= 1.16 < 2 'HVLJQDVWZR:D\6ODE
6140
O\
PP
PP
PP
'HVLJQ/RDG
'HVLJQ/RDG
6HOIORDGRIVODE [
3ODVWHU .1P
0DUEOH .1P
,QQHUSODVWHU .1P
3DUWLWLRQZDOOORDG
/LYHORDG .1P
&RQVLGHULQJXQLWZLGWKRIVODEZ .1P
,6
0RPHQW&DOFXODWLRQ
0RPHQW&DOFXODWLRQ
RQ
YH%HQGLQJPRPHQWFRHIILFLHQWDWFRQWLQXRXVHGJH
7DEOH
7DEOH
[ \
YH%HQGLQJPRPHQWFRHIILFLHQWDWPLGVSDQ
.1P
.1P
,6
[ \
)RU6KRUW6SDQ
$QQH[
'
'
.1P
$QQH[
'
'
.1P
)RU/RQJ6SDQ
$QQH[
6XSSRUWPRPHQW0V
'
'
.1P
$QQH[
'
'
.1P
&KHFNIRUGHSWKIURP0RPHQW&RQVLGHUDWLRQ
&KHFNIRUGHSWKIURP0RPHQW&RQVLGHUDWLRQ
,6
$QQH[
*
*
&DOFXODWLRQRI$UHDRI6WHHO
,6
$UHDRI6WHHODORQJVKRUWVSDQ
FO
FO
)RUVKRUWHUVSDQ
)RUVKRUWHUVSDQ
$UHDRI6WHHODWVXSSRUW7RS%DUV
$UHDRI6WHHODWVXSSRUW7RS%DUV
,6
$QQH[*
$QQH[*
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E
3W
,6
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
6ROYHG(T IRU$VW
$QQH[*
$QQH[*
f ck
4.6 M u
(1 1
) bd
fy
f ck bd 2
*E
E
'HSWKRI6ODEG
[ZO[
\ZO[
M max
=
4.14 x b
[[
23.33 x106
= 75.1mm
4.14 x1000
G PPPP
PPPP
0LQ$VW PP
$VW 0.5
f ck
4 .6 M u
(1 1
) bd
fy
f ck bd 2
30
4.6 x 23.33 x106
(1 1
) x 1000 x 136
0 .5 x
415
30 x1000 x 136 2
78.5
Ab
x1000
x1000 PP
A st
506.7
3URYLGHPP#PPFF
$FWXDO$VW
$VW 0.5
6SDFLQJ2.
6SDFLQJ2.
PP
6SDFLQJRI%DUV6Y
6ROYHG(T IRU$VW
Ab
78.5
x1000 =
x1000 = 523.33 PP
Sv
150
PP#PP
FF
FF
$FW$VW
PP
30
4.6 x17.5 x 106
0.5 x
(1 1
) x 1000 x136
415
30 x 1000 x136 2
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
3W
,6
$UHDRI6WHHO$ORQJ/RQJ6SDQ
$UHDRI6WHHO$ORQJ/RQJ6SDQ
$QQH[*
$QQH[*
f ck
4 .6 M u
(1 1
) bd
fy
f ck bd 2
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
3W
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
,6
$FW$VW
f ck
4.6 M u
(1 1
) bd
fy
f ck bd 2
$QQH[*
$QQH[*
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
6SDFLQJRI%DUV6Y
78.5
Ab
x1000
x1000 PP
A st
373.6
6SDFLQJ2.
6SDFLQJ2.
PP#PP
3URYLGHPP#PPFF
$FWXDO$VW
Ab
78.5
x1000 =
x1000 = 392.5 PP
Sv
200
FF
FF
$FW$VW PP
$VW 0.5
6SDFLQJRI%DUV6Y
$VW 0.5
78.5
Ab
x1000
x1000 PP
A st
399.7
3URYLGHPP#PPFF
$FWXDO$VW
6ROYHG(T IRU
IRU$VW
Ab
78.5
x1000 =
x1000 = 413.2 PP
Sv
190
30
4.6 x 14 x106
(1 1
) x 1000 x136
0.5 x
415
30 x 1000 x136 2
6SDFLQJ2.
6SDFLQJ2.
PP#PP
FF
FF
PP
6ROYHG(T IRU$VW
3W
FF
FF
&KHFNIRU6KHDU
&KHFNIRU6KHDU
$FW$VW PP
)RU[GLUHFWLRQLHVKRUWVSDQ
6KHDUDWFULWLFDOVHFWLRQ
.1.1
G P
P
Vu
47.5
=
3.07 3.07 0.136
9X .1
+HUHWHQVLRQUHLQIRUFHPHQWRIVODEFRQWULEXWHLQVKHDU
)RUSW
,6
c = 0.4 1PP
7DEOH
7DEOH
FO
FO
&KHFNIRU'HIOHFWLRQ
&KHFNIRU'HIOHFWLRQ
$ORQJVKRUW6SDQ
6LQFHERWKHQGVDUHFRQWLQXRXVWKHEDVLFYDOXHPD\EHWDNHQDV
,6
FO
FO
,6
3W
)LJ
)LJ
6SDFLQJRI%DUV6Y
78.5
Ab
x1000
x1000 PP
A st
296
3URYLGHPP#PPFF
$FWXDO$VW
Ab
78.5
x1000 =
x1000 = 302 PP
Sv
260
6SDFLQJ2.
6SDFLQJ2.
6.14
2
.1
N c EG
9X
.1
.1
.1
c = 1PP
IV 0.58 f y
373.6
Area of Steel Re quired
[[
Area of Steel Pr ovided
392.5
1PP
+HQFH6DIH
+HQFH6DIH
&KHFNIRU
&KHFNIRU'HYHORSPHQW/HQJWK
'HYHORSPHQW/HQJWK
6140
lx
=
=131.2 PPGSURYLGHG
M .F . x Basic Value 1.8 x 26
GSHU
/G
s
1.6 x 4 x bd
GSHUG+HQFH
G+HQFH
x 0.87 x 415
= 40.3
1.6 x 4 x 1.4
6DIH
6DIH
Ld
M1
+ Lo
V
)RU6KRUW6SDQ
M1
+ Lo
V
,6
+HQFH6DIH
+HQFH6DIH
18.66
'LVWULEXWLRQ%DUV
'LVWULEXWLRQ%DUV
FO
FO
$VG PP
PP
6SDFLQJRI%DUV6Y
78.5
Ab
x 1000
x 1000 PP
A sd
192
3URYLGHPP#PPFF
$FW$VW
$FW$VG
78.5
Ab
x 1000
x 1000 = 196.3 PP
Sv
400
PP
7RUVLRQ5HLQIRUFHPHQW
'
&XUWDLOPHQWRI5HLQIRUFHPHQWDQG'HWDLOLQJ
&XUWDLOPHQWRI5HLQIRUFHPHQWDQG'HWDLOLQJ
&XUWDLOPHQW LV GRQH E\ DV SHU VLPSOLILHG PHWKRG DQG GHWDLOLQJ LV
GRQHE\DVSHU,QGLDQ6WDQGDUG&RGH,663
Table 16
5HI
5HI
6WHS
6WHS
&DOFXODWLRQV
&DOFXODWLRQV
6ODE,'
6ODE,'
,QWHULRUSDQHO
6
6
7KLFNQHVVRIVODEDQGGXUDELOLW\FRQVLGHUDWLRQ
7KLFNQHVVRIVODEDQGGXUDELOLW\FRQVLGHUDWLRQ
ODEDQGGXUDELOLW\FRQVLGHUDWLRQ
&OHDU6SDQV
/[ P
/\ P
$VVXPLQJFOHDUVSDQFRYHU PP
3URYLGLQJPPEDU
(IIHFWLYHOHQJWK
Depth of slab, (d ) =
d=
Shorter Span
4140
PP
26 x1.65 * 1.05
6D\' PP
6LQFH
ly
lx
2XWSXW
2XWSXW
G PP
PP
' PP
PP
4340
= 1.05 < 2 'HVLJQDVWZR:D\6ODE
4140
O[ PP
PP
O\ PP
PP
'HVLJQ/RDG
'HVLJQ/RDG
6HOIORDGRIVODE [
3ODVWHU .1P
0DUEOH .1P
,QQHUSODVWHU .1P
3DUWLWLRQZDOOORDG
/LYHORDG .1P
&RQVLGHULQJXQLWZLGWKRIVODEZ .1P
0RPHQW&DOFXODWLRQ
0RPHQW&DOFXODWLRQ
,6
YH%HQGLQJPRPHQWFRHIILFLHQWDWFRQWLQXRXVHGJH
[ \
7DEOH
7DEOH
YH%HQGLQJPRPHQWFRHIILFLHQWDWPLGVSDQ
.1P
.1P
,6
[ \
)RU6KRUW6SDQ
$QQH[
'
'
.1P
$QQH[
'
'
.1P
)RU/RQJ6SDQ
$QQH[
'
'
.1P
$QQH[
'
'
.1P
&KHFNIRUGHSWKIURP0RPHQW&RQVLGHUDWLRQ
&KHFNIRUGHSWKIURP0RPHQW&RQVLGHUDWLRQ
,6
$QQH[
*
*
,6
&DOFXODWLRQRI$UHDRI6WHHO
FO
FO
$UHDRI6WHHODORQJVKRUWVSDQ
$UHDRI6WHHODWVXSSRUW7RS%DUV
$UHDRI6WHHODWVXSSRUW7RS%DUV
,6
$QQH[*
$QQH[*
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
,6
3W
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
$UHDRI6WHHODWPLGVSDQ%RWWRP%DUV
$QQH[*
$QQH[*
*E
E
f ck
4.6 M u
)bd
(1 1
fy
f ck bd 2
'HSWKRI6ODEG
$VW 0.5
[ZO[
[ZO[
M max
=
4.14 x b
9.28 x106
= 47.3 mm
4.14 x1000
G PPPP
6ROYHG(T IRU$VW
78.5
Ab
x1000
x1000 PP
A st
193.7
3URYLGHPP#PPFF
$VW 0.5
30
4.6 x 9.28 x106
(1 1
) x 1000 x136
0.5 x
415
30 x 1000 x136 2
6SDFLQJRI%DUV6Y
0LQ$VW PP
f ck
4 .6 M u
)bd
(1 1
fy
f ck bd 2
$FWXDO$VW
Ab
78.5
x1000 =
x1000 = 261.7 PP
Sv
300
6SDFLQJ2.
6SDFLQJ2.
PP#PP
FF
FF
$FW$VW
PP
6ROYHG(T IRU$VW
30
4.6 x 6.9 x 106
0.5 x
(1 1
) x 1000 x136
415
30 x 1000 x136 2
PP0LQ$VW
3URYLGLQJPPEDUV
$E PP
3W
,6
$UHDRI6WHHO$ORQJ/RQJ6SDQ
$UHDRI6WHHO$ORQJ/RQJ6SDQ
$QQH[*
$QQH[*
f ck
4.6 M u
)bd
(1 1
fy
f ck bd 2
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
3W
$UHDRI6WHHODW0LG6SDQ%RWWRP%DUV
$UHDRI6WHHODW0LG6SDQ%RWWRP%DUV
,6
$QQH[*
$QQH[*
*E
E
PP!0LQ$VW
3URYLGLQJPPEDUV
$E PP
6SDFLQJRI%DUV6Y
78.5
Ab
x1000
x1000 PP
A st
192
3URYLGHPP#PPFF
$FWXDO$VW
$VW 0.5
Ab
78.5
x1000 =
x1000 = 262 PP
Sv
300
6SDFLQJRI%DUV6Y
78.5
Ab
x1000
x1000 PP
A st
192
3URYLGHPP#PPFF
$FWXDO$VW
$VW 0.5
Ab
78.5
x1000 =
x1000 = 262 PP
Sv
300
f ck
4.6 M u
)bd
(1 1
fy
f ck bd 2
30
4.6 x 6.4 x106
(1 1
) x 1000 x138
0 .5 x
415
30 x 1000 x136 2
6SDFLQJ2.
6SDFLQJ2.
PP#PP
FF
FF
$FW$VW PP
3W
&KHFNIRU6KHDU
&KHFNIRU6KHDU
)RU[GLUHFWLRQLHVKRUWVSDQ
.1
6KHDUDWFULWLFDOVHFWLRQ
.1.1
G P
P
Vu
32
=
2.07 2.07 0.136
9X .1
,6
+HUHWHQVLRQUHLQIRUFHPHQWRIVODEFRQWULEXWHLQVKHDU
)RUSW
7DEOH
7DEOH
c = 0.3 1PP
FO
FO
&KHFNIRU'HIOHFWLRQ
&KHFNIRU'HIOHFWLRQ
$ORQJVKRUW6SDQ
,6
6LQFHERWKHQGVDUHFRQWLQXRXVWKHEDVLFYDOXHPD\EHWDNHQDV
FO
FO
192
Area of Steel Re quired
[[
Area of Steel Pr ovided
262
,6
3W
)LJ
)LJ
6SDFLQJRI%DUV6Y
78.5
Ab
x1000
x1000 PP
A st
192
3URYLGHPP#PPFF
$FWXDO$VW
N c EG
Ab
78.5
x1000 =
x1000 = 262 PP
Sv
300
4.14
2
IV 0.58 f y
1PP
9X .1
.1
c =
1PP
+HQFH6DIH
+HQFH6DIH
,6
FO
FO
GSHU
lx
4140
=
= 79.6 PPGSURYLGHG
M .F . x Basic Value 2 x 26
GSHUG+HQFH
6DIH
6DIH
'LVWULEXWLRQ%DUV
'LVWULEXWLRQ%DUV
$VG RIE' [[
PP
$VG PP
6SDFLQJRI%DUV6Y
78.5
Ab
x 1000
x 1000 PP
A sd
192
3URYLGHPP#PPFF
$FW$VW
78.5
Ab
x 1000
x 1000 = 196.3 PP
Sv
400
7RUVLRQ5HLQIRUFHPHQW
$FW$VG
PP
6LQFHWKLVLVLQWHULRUSDQHOQRQHHGRIWRUVLRQUHLQIRUFHPHQW
&XUWDLOPHQWRI5HLQIRUFHPHQW
&XUWDLOPHQWRI5HLQIRUFHPHQW
&XUWDLOPHQW LV GRQH E\ DV SHU VLPSOLILHG PHWKRG DQG ,QGLDQ
6WDQGDUG&RGH,663
5HI
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
7RWDO0RPHQWYH0G 1PP
7RWDO0RPHQWYH0G 1PP
)URP6S
0RPHQWRIUHVVLVWDQFH0X
)RUYHPRPHQW
( 1PP
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
PP
$VWSURYLGH PP
$VFSURYLG
PP
$VVXPH%DU'LDPHWHU
PP
$UHDHDFKEDU
PP
1RRI%RWWRPEDUSURYLG
)RUFRPSUHVVLRQEDU
$VVXPH%DU'LDPHWHU
PP
$UHDHDFKEDU
PP
1RRI7RSEDUSURYLGHG
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
2XWSXW
&DOFXODWLRQ
5HI
2XWSXW
IRUYHPRPHQW
VLQFH
0G!0X
WKHQ
WKHEHDPLV
7KHEHDPLV'RXEO\5HLQIRUFHG
)RU'RXEO\5HLQIRUFHG%HDP
$VW
0XOLPI\G
G
6R
$VF
PP
$VVXPHG
PP
G
G
G
G
IVF
G
G
IVF
0G
1PP
IVF
1PP
IFF
1PP
$VW
PP
$VF
$VW
PP
)RUWHQVLOH6WHHO
$VVXPHG
$UHDRIVWHHODV
1RRI%DUV
6SDFLQJV
)RU&RPS6WHHO
$VVXPHG
$UHDRIVWHHODV
1RRI%DUV
6SDFLQJV
6XPPDU\ G
7RS
%RWWRP
PP
PP
PP
PP
PP
PP
IURP,6
7DEOH
F
GVY
RN
Q
#
'HVLJQRI6KHDUUHLQIRUFHPHQW
9
1
7X
1PP
$VW
PP
3W
3W
F
3W
F
1PP
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
&DOFXODWLRQ
$VY
PP
FPD[
1PP
,6
D
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
0LQ6Y
PP
IURP7RUVLRQ
6Y
PP
6Y
2XWSXW
PP
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
&&
$WVHFWLRQ/ O
7RUVLRQ
0D[LPXP0RPHQW
0LQLPXP0RPHQW
0D[LPXP6KHDU
1PP
1PP
1PP
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
7RWDO0RPHQWYH0G
7RWDO0RPHQWYH0G
)URP6S
1PP
1PP
0RPHQWRIUHVVLVWDQFH0X
( 1PP
)RUYHPRPHQW
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
&DOFXODWLRQ
PP
5HI
2XWSXW
PP
PP
PP
PP
IRUYHPRPHQW
VLQFH
0G0X
WKHQ
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
PP
F
GVY
$VY
PP
PP
PP
PP
3W
F
1PP
PP
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
&DOFXODWLRQ
FPD[
2XWSXW
1PP
,6
D
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
0LQ6Y
PP
IURP7RUVLRQ
6Y
PP
6Y
PP
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
&&
$WVHFWLRQ/ /
7RUVLRQ
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
7RWDO0RPHQWYH0G
1PP
7RWDO0RPHQWYH0G 1PP
)URP6S
0RPHQWRIUHVVLVWDQFH0X
)RUYHPRPHQW
( 1PP
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
&DOFXODWLRQ
2XWSXW
PP
PP
PP
PP
PP
IRUYHPRPHQW
VLQFH
0G0X
WKHQ
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
PP
F
GVY
$VY
(
PP
PP
PP
PP
3W
F
1PP
PP
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
&DOFXODWLRQ
FPD[
2XWSXW
1PP
,6
D
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
0LQ6Y
PP
IURP7RUVLRQ
6Y
PP
6Y
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
PP
&&
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
)URP6S
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
2XWSXW
5HI
&DOFXODWLRQ
IRUYHPRPHQW
2XWSXW
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VF
RU
PP
7DNH
$VF
PP
0LQ6WHHO
%
GI\
PP
$VWSURYLGH PP
PP
$VFSURYLG
)RUERWWRPEDU
$VVXPH%DU'LDPHWHU
$UHDHDFKEDU
1RRI%RWWRPEDUSURYL
IRU7RSEDU
$VVXPH%DU'LDPHWHU
$UHDHDFKEDU
1RRI7RSEDUSURYLGHG
6XPPDU\ G
7RS
%RWWRP
IURP,6
7DEOH
F
GVY
PP
PP
PP
PP
Q
#
'HVLJQRI6KHDUUHLQIRUFHPHQW
9
1
7X
1PP
$VW
PP
3W
3W
F
3W
F
1PP
PP
$VY
PP
FPD[
,6
D
1PP
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
&DOFXODWLRQ
0LQ6Y
PP
IURP7RUVLRQ
6Y
PP
6Y
2XWSXW
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
&&
$WVHFWLRQ/ O
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
7RWDO0RPHQWYH0G 1PP
1PP
7RWDO0RPHQWYH0G
)URP6S
0RPHQWRIUHVVLVWDQFH0X
)RUYHPRPHQW
1PP
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
PP
$VWSURYLGH PP
PP
$VFSURYLG
$VVXPH%DU'LDPHWHU
PP
$UHDHDFKEDU
PP
1RRI%RWWRPEDUSURYL
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
&DOFXODWLRQ
)RUFRPSUHVVLRQEDU
$VVXPH%DU'LDPHWHU
PP
$UHDHDFKEDU
PP
1RRI7RSEDUSURYLGHG
2XWSXW
IRUYHPRPHQW
VLQFH
0G0X
WKHQ
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VF
RU
PP
7DNH
$VF
PP
0LQ6WHHO
%
GI\
PP
F
GVY
$VY
PP
PP
PP
PP
Q
#
'HVLJQRI6KHDUUHLQIRUFHPHQW
9
1
7X
1PP
$VW
PP
3W
3W
F
IURP,6
7DEOH
3W
F
1PP
PP
PP
FPD[
1PP
9XV
1
6SDFLQJ)URPVKHDU
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
,6
D
&DOFXODWLRQ
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
0LQ6Y
IURP7RUVLRQ
6Y
PP
2XWSXW
PP
PP
6Y
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
&&
$WVHFWLRQ/ /
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
)URP6S
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
&DOFXODWLRQ
)RUFRPSUHVVLRQEDU
$VVXPH%DU'LDPHWHU
PP
$UHDHDFKEDU
PP
1RRI7RSEDUSURYLGHG
2XWSXW
IRUYHPRPHQW
VLQFH
0G0X
WKHQ
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VF
RU
PP
7DNH
$VF
PP
0LQ6WHHO
%
GI\
PP
Q
#
'HVLJQRI6KHDUUHLQIRUFHPHQW
9
1
7X
1PP
$VW
PP
3W
3W
F
IURP,6
7DEOH
,6
D
F
1PP
GVY
PP
$VY
PP
FPD[
1PP
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
3W
F
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
&DOFXODWLRQ
0LQ6Y
2XWSXW
PP
IURP7RUVLRQ
6Y
PP
6Y
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
PP
&&
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
7RWDO0RPHQWYH0G 1PP
7RWDO0RPHQWYH0G 1PP
)URP6S
0RPHQWRIUHVVLVWDQFH0X
)RUYHPRPHQW
1PP
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
$
%
&
$VW RU
PP
7DNH
$VW PP
0LQ6WHHO
%
GI\
PP
$VWSURYLGHG PP
$VFSURYLGHG
PP
$VVXPH%DU'LDPHWHU
$UHDHDFKEDU
1RRI%RWWRPEDUSURYLGH
)RUFRPSUHVVLRQEDU
$VVXPH%DU'LDPHWHU
$UHDHDFKEDU
1RRI7RSEDUSURYLGHG
PP
PP
PP
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
2XWSXW
5HI
&DOFXODWLRQ
IRUYHPRPHQW
2XWSXW
VLQFH
0G!0X
WKHQ
WKHEHDPLV
7KHEHDPLV'RXEO\5HLQIRUFHG
)RU'RXEO\5HLQIRUFHG%HDP
$VF
0XOLPI\G
G
6R
$VF
PP
&DOFXODWLRQ
$VVXPHG
PP
G
G
G
G
IVF
G
G
IVF
0G
1PP
IVF
1PP
IFF
1PP
$VW
PP
5HI
$VF
$VF
DV
DV
PP
)RUWHQVLOH6WHHO
$VVXPHG
1RRI%DUV
6SDFLQJV
)RU&RPS6WHHO
$VVXPHG
1RRI%DUV
6SDFLQJV
PP
PP
PP
PP
PP
PP
GHVLJQRIVKHDUUHLQIRUFHPHQW
$VW
3W
3W
F
IURP,6
7DEOH
F
GVY
1PP
PP
$VY
PP
FPD[
3W
F
1PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
2XWSXW
5HI
,6
&DOFXODWLRQ
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
D
0LQVSDFLQJIURPVKHDU
0LQ6Y
IURP7RUVLRQ
6Y
PP
6Y
2XWSXW
PP
PP
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
&&
$WVHFWLRQ/ O
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
7RWDO0RPHQWYH0G 1PP
7RWDO0RPHQWYH0G
1PP
)URP6S
0RPHQWRIUHVVLVWDQFH0X
)RUYHPRPHQW
1PP
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VW
RU
PP
7DNH
$VW
PP
0LQ6WHHO
%
GI\
PP
(
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
&DOFXODWLRQ
$VWSURYLGHG PP
$VFSURYLGHG
PP
$VVXPH%DU'LDPHWHU
PP
$UHDHDFKEDU
PP
1RRI%RWWRPEDUSURYLGH
)RUFRPSUHVVLRQEDU
$VVXPH%DU'LDPHWHU
$UHDHDFKEDU
1RRI7RSEDUSURYLGHG
2XWSXW
PP
PP
IRUYHPRPHQW
VLQFH
0G0X
WKHQ
)RUVLQJO\5HLQIRUFHG%HDP
0G
I\
$VW
G$VW
I\E
G
IFN
%
&
$VF
RU
PP
7DNH
$VF
PP
0LQ6WHHO
%
GI\
PP
PP
PP
6XPPDU\
7RS
%RWWRP
PP
PP
#
'HVLJQRI6KHDUUHLQIRUFHPHQW
9
1
7X
1PP
$VW
PP
3W
3W
F
3W
F
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
IURP,6
7DEOH
&DOFXODWLRQ
F
GVY
$VY
2XWSXW
1PP
PP
PP
FPD[
1PP
9XV
1
6SDFLQJ)URPVKHDU
,6
D
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
0LQ6Y
IURP7RUVLRQ
6Y
6Y
PP
PP
PP
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
&&
$WVHFWLRQ/ /
7RUVLRQ
1PP
0D[LPXP0RPHQW
0LQLPXP0RPHQW
1PP
1PP
0D[LPXP6KHDU
1
0RPHQWGXHWR7RUVLRQ
)URP,6
0RPHQW07
1PP
0RPHQWRIUHVVLVWDQFH0X
)RUYHPRPHQW
1PP
VLQFH
0G0X
WKHQ
WKHEHDPLV
7KHEHDPLV6LQJO\5HLQIRUFHG
)RUVLQJO\5HLQIRUFHG%HDP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
5HI
$
&DOFXODWLRQ
0G
$VW
7DNH
$VW
0LQ6WHHO
2XWSXW
I\
$VW
G$VW
I\E
G
IFN
%
&
RU
PP
PP
%
GI\
PP
5HI
PP
PP
2XWSXW
PP
PP
IRUYHPRPHQW
)URP6S
VLQFH
0G!0X
WKHQ
7KHEHDPLV'RXEO\5HLQIRUFHG
)RU'RXEO\5HLQIRUFHG%HDP
$VF
0XOLPI\G
G
6R
$VF
PP
$VVXPHG
PP
G
G
G
G
IVF
G
G
IVF
0G
1PP
IVF
1PP
IFF
1PP
$VW
PP
$VF
$VF
)RUWHQVLOH6WHHO
$VVXPHG
PP
$UHDRIVWHHODV
PP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
5HI
&DOFXODWLRQ
1RRI%DUV
2XWSXW
)RU&RPS6WHHO
$VVXPHG
PP
$UHDRIVWHHODV
PP
1RRI%DUV
6XPPDU\
7RS
%RWWRP
Q
#
'HVLJQRI6KHDUUHLQIRUFHPHQW
9
1
7X
1PP
$VW
3W
3W
F
IURP,6
7DEOH
5HI
F
GVY
$VY
3W
F
1PP
PP
PP
&DOFXODWLRQ
FPD[
2XWSXW
1PP
,6
D
9XV
1
6SDFLQJ)URPVKHDU
6Y
I\
$VY
G9XV
0LQVSDFLQJIURPVKHDU
0LQ6Y
PP
IURP7RUVLRQ
6Y
PP
6Y
PP
PP
6R6KHDUUHLQIRUFHPHQWDUHSURYLGHGDW
PPGLDVWLUUXSV#
PP
PP
&&
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUDGDQJRO3DQNDM%DUDO3UDYDVK0RRO
VY PP
LLL'HVLJQRIFROXPQ
Table 20
Reference
Step
Calculations
.QRZQGDWD
Output
column D9
350 mm
D=
350 mm
Column, B =
350 mm
B=
350 mm
Height, L =
3.5 mm
L=
3.5 mm
Clear height, l =
3.5 mm
Clear cover, d=
Width of
40 mm
32
mm
50 mm
4846
KN
4846x1000
=
900x600
50 mm
effective cover
d=
&KHFNIRU$[LDO6WUHVV
IS 3920:1993
cl.7.1.1
IS13920:1993
cl.7.1.2
IS13920:1993
Depth of Column, D =
cl.7.1.3
Hence, OK
IS 456 : 2000
8.97 Mpa
0.1fck(2.5)
900mm
table 28
IS 456:2000
cl.25.1.2
2.28 m
le =
2.28 m
column),ok
/LPLWLQJ/RQJLWXGLQDO5HLQIRUFHPHQW
IS 456:2000
Min. Reinforcement,
cl.26.5.3.1
= 0.8% of BD
0.8*350*350/100=
980
mm
980 mm2
Asc=
Max.
BD
Min.
4900 mm2
Asc =
4900 mm
extreme case,
7350 mm2
Asc=
BD
IS 456:2000,
'HVLJQIRUVHFWLRQ
7350 mm2
cl.26.5.3.1
Pu=
Mx=
26 KNm
My=
2 KNm
Mu = abs(Mx) + abs(My) =
28 KNm
IS 456:2000
cl.25.4
433.9 KN
Min. eccentricity:
emin= l/500 + D/30 20 mm
28
Mu=
8.10 KNm
34.10 KNm
emin
3 . 50 x 1000
500
350
18.67 <20mm
30
0RPHQWGXHWRPLQLPXPHFFHQWULFLW\
'
52
350
0 . 148
Pu
26x1000
=
=
f ck BD
30 x 350 x 350
0.1181
Mu
28x106
=
=
2
f ck BD
3025x600 x9002
Assume
reinforcement
is
0.0265
uniformly
0.005
ck
76 KNm
My =
71.5 KNm
Mu = 76+71.5 =
147.5 KNm
SP16
chart 48
'HVLJQRIFROXPQIRU0D[3
Pmax=
Mx =
P=
Asc= pBD =
Min Ast=
0.15 %
183.75 mm
980 mm
498 KN
Mu=
148 KNm
Now,
P max
498x1000
=
30x350x350
f ck BD
0.14
SP16
chart 48
SP16
Chart 48
f ck BD
147 . 5 x10 6
=
30 x 350 x 350
d'
= 0 . 062
D
f ck
0.05
Adopt P=
1.5 %
and Asc=
1837.5 mm2
Asc=
Asc provided =
p=
p
f
Asc(
2060.9 mm2
Act)
for p/fck=
0.0561
SP16
Pu/fckBD=
0.14
chart48
1837.5
mm2
2060.9
mm2
0.0561
ck
M u
BD
1.6824 %
&KHFNIRU%LD[LDO0RPHQW
Providing 12 0f 32mm
p
1.5 %
0.11
P=
0.12
Muxl=
154.35 KNm
for p=
1.68 %
chart63
Puz/Ag=
Puz=
SP16
IS456:2000
cl.39.6
ck
= 0.667+1.667xPu/Puz
M ux
M
uxl
M uy
+
M
uy1
18 N/ mm2
220 KN
2
Muxl=
= 0.45 < 1, ok
Muyl =
'HVLJQIRU6KHDU
IS 456:2000
table 19
3X]
1.68 %
0.76 N/ mm
154.35
KNm
154.35
KNm
.1
IS 456:2000
cl. 40.2.2
3 x Pu
= 1+ A x f
g
ck
1.5
3 x 481 x 1000
= 1 +
350 x 350 x 30
Actual,
1.39
=
1.39 <1.50k
Vc=
Vux = 40.6 KN
Vuy = 16 KN
1.0564 N/ mm2
129.41 KN
IS 456:2000
cl
Diameter of ties:
26.5.3.2.C.2
0.25*maximum diameter
of longitudinal reinforcement
0.25*20=5mm
IS
Sv 300mm
in central part.
13920:1993
cl.7.3.3
IS
13920:1993
cl.7.4.8
A sh = 0 . 18 S h
f ck
fy
Ag
A 1
k
mm2
h= Max of
where 3
Therefore,
30 350x350
28.27 = 0.18 x S x 90
1
415 78400
IS
450 mm
or, S= 43mm
13920:1993
cl.7.4.1
= 350 = 87.5
14 of minimumLateralDimension
100mm
cl.7.4.6
IS
= 90 mm
13920:1993
Hence, Provide 8 mm links @ 75 mm c/c for a
distance
Tab
Reference
Step
Calculations
Output
Rectangular column B4
Known data:
Height, L =
Clear height, l =
Clear cover, d=
40 mm
32 mm
effective cover
Width of
Column, B =
900 mm
D=
900 mm
600 mm
B=
600 mm
mm
L=
3.50 mm
3.5
3.5 mm
56
mm
d=
&KHFNIRU$[LDO6WUHVV
56 mm
IS 3920:1993
cl.7.1.1
IS13920:1993
cl.7.1.2
IS13920:1993
Depth of Column, D =
cl.7.1.3
Hence, OK
IS 456 : 2000
4846 KN
4846x1000
=
900x600
8.97 Mpa
0.1fck(2.5)
900mm
table 28
IS 456:2000
cl.25.1.2
2.28 m
le =
2.28 m
column),ok
/LPLWLQJ/RQJLWXGLQDO5HLQIRUFHPHQW
IS 456:2000
Min. Reinforcement,
cl.26.5.3.1
= 0.8% of BD
0.8*600*900/100=
4320 mm2
Min. Asc=
4320 mm2
Max. Asc
21600 mm2
21600 mm2
extreme case,
IS 456:2000,
Asc=
'HVLJQIRUVHFWLRQ
32400
32400 mm2
mm2
cl.26.5.3.1
Pu=
Mx=
185 KNm
My=
137.8 KNm
Mu = abs(Mx) + abs(My) =
322.8 KNm
IS 456:2000
cl.25.4
Min. eccentricity:
emin= l/500 + D/30 20 mm
emin =
3 . 50 x 1000
500
900
37 >20m
74.84 KNm
M = 74.84KNm < Mx or My
Pu
f ck BD
56
900
=
322.8 KNm
Mu=
d '
=
D
0RPHQWGXHWRPLQLPXPHFFHQWULFLW\
322.8 KNm
Mu=
30
2022.7 KN
0.15 %
= 0 . 0622
0.125
2022.7x100
0
=
30 x 900 x 600
Mu
322 . 8 x10 6
=
=
2
f ck BD
3025 x 600 x 900 2
0.022
p
=
f ck
0.005
SP16
P=
chart 48
Asc= pBD =
810 mm2
Min Ast=
4320 mm2
'HVLJQRIFROXPQIRU0D[3
Pmax=
Mx =
8510.8 KN
-216 KNm
My =
71.5 KNm
KNm
and My.
Mu = 216+315 =
531 KNm
Mu=
Now,
SP16
chart 48
P max
f ck BD
M u
f ck BD
8510x1000
30x600x900
531 x 10
30 x 600 x 900
Chart 48
0.036
f ck
0.055
P=
1.65 %
Adopt P=
1.65 %
and Asc=
8910 mm2
Asc provided =
p=
&KHFNIRU%LD[LDO0RPHQW
Providing 12 0f 32mm
0.525
SP16
531 KNm
9651 mm
Asc=
8910 mm2
Asc(Act)=
9651 mm2
1.78 %
0.1
ck
for p/fck=
0.06
SP16
Pu/fckBD=
0.525
chart48
0.06
u
2
BD
Muxl=
874.8 KNm
for p=
1.787 %
chart63
Puz/Ag=
Puz=
10260 KN
SP16
ck
= 0.667+1.667xPu/Puz
M ux
M uxl
M uy
+
M
uy 1
19 N/ mm2
= 0 . 06 < 1, ok
IS456:2000
Muxl=
874.8 KNm
cl.39.6
Muyl =
874.8 KNm
3X]
'HVLJQIRU6KHDU
IS 456:2000
table 19
1.78 %
0.78 N/ mm2
.1
n = 1.26
= 1+
IS 456:2000
cl. 40.2.2
3 x Pu
A g x f ck
= 1.42
1.42 <1.50k
Actual,
Vc=
Vux = 40.6 KN
Vuy = 92.6 KN
1.108 N/mm2
598.1 KN
'HVLJQRI/DWHUDO7LHV
IS 456:2000
26.5.3.2.C.2
reinforcement
0.25*32=8mm
IS 13920:1993
cl.7.3.3
Diameter of ties:
Sv 300mm
h= Max of
cl.7.4.8
( 900 40 40 )
= 205 mm
(
600
40
40
)
= 130 mm
4
where
is no. of bars in4each face of column
section
= 205 mm
IS 13920:1993
100 mm
than
cl.7.4.1
30 600 x900
415 448096
IS 13920:1993
cl.7.4.6
1
6 of Clear Span = 3500 6 = 583 mm
450 mm
Table 22
5HIHUHQFH
Step
Calculations
Output
Known data:
Height, L =
Clear height, l =
Clear cover, d=
40 mm
32 mm
Circular column O
400 mm
3.5 mm
D=
400 mm
B=
400 mm
L=
3.5 mm
=
,6
FO
56 mm
Lowest among
all load
5.6137
combination
705.44 KN
d=
Eff cover
56 mm
Axial Stress =
5.6137 >
0.1fck
1 >0.4
,6
FO
,6
FO
Depth of Column, D =
,6
WDEOH
400mm>200mm
B/D = 400/400 =
Hence, OK
2.28 m
le =
2.28 M
3.50 =
,6
FO
column),ok
,6
Min. Reinforcement,
FO
= 0.8% of (D2)/4
/LPLWLQJ/RQJLWXGLQDO5HLQIRUFHPHQW
0.8 x( x 4002)/400 =
2
1005.3 mm
Min. Asc=
1005 mm2
,6
5027 mm2
Max. Asc =
(D2)/4
5026.5 mm2
0.04 x ( x 4002)/4=
(D2)/4
extreme case,
7540 mm2
Asc=
7539.8 mm2
'HVLJQIRUVHFWLRQ
'HVLJQRIFROXPQIRU0D[0RPHQW
FO
Mx=
75.43 KNm
My=
44.9 KNm
120.33 KNm
Pu=
1959.14 KN
Mu=
120.3 KNm
,6
FO
Min. eccentricity:
column
emin= 3 . 50 x1000
M = 39.82KNm < My
400
30
0RPHQWGXHWRPLQLPXPHFFHQWULFLW\
Mu=
d
D
39.82932 KNm
'
56
400
20.33 mm
120.33 KNm
0.14
Pu
1959.14x10 00
=
=
f ck BD
30 x 400 x 400
0.4082
Mu
120x106
=
=
2
fck BD
30x400x4002
0.0627
0.1
Assume
reinforcement
is
uniformly
63
FKDUW
p
f ck
P=
Asc= p(D2)/4=
3 %
3769.92 mm2
'HVLJQRIFROXPQIRU0D[3
Pmax=
2286.6 KN
Mx =
-70.21 KNm
My =
-36.91 KNm
46.48 >My
Mu = 70.21+46.5=
116.69 KNm
63
FKDUW
&KDUW
Pmax
f ck BD
M u
f ck BD
2286.6x100 0
=
30x400x400
531 x 10 6
30 x 600 x 900
f
63
0.476
0.060
0.12
ck
Then P=
3.6 %
3.6 %
Hence adopt, P=
and Asc=
Asc provided =
p=
Now,
Providing 6 0f 32mm
63
ck
M u
BD
Asc(Act)=
4524 mm2
4826 mm2
3.8 %
0.476375
0.065
Pu/fckD2=
Asc=
4825.5 mm2
&KHFNIRU%LD[LDO0RPHQW
4523.90 mm2
FKDUW
Muxl=
124.8 KNm
63
for p=
3.8 %
FKDUW
Puz/Ag=
Puz=
,6
FO
= 0.667+1.667xPu/Puz
ux
uxl
M
+
M
uy
uy 1
,6
< 1, ok
3.8 %
0.96 N/mm2
0.44
'HVLJQIRU6KHDU
c =
3140 KN
1.88
25 N/mm2
Muxl=
124.8 KNm
Muyl =
124.8 KNm
Puz =
3140 KN
WDEOH
For
members
subjected
to
axial
n =
1.880
,6
= 1+ 3 x P u
1.489
FO
A g x f ck
3x625.98x1000x4
= 1.489 < 1.5, ok
x4002 x30
Actual,
Vc= 1.429*x4002/(4x1000)=
Vux = -16.2 KN
Vuy = 26.2 KN
= 1+
1.4294 N/mm2
179.6 KN
'HVLJQRI/DWHUDO7LHV
,6
FO
'LDPHWHURIWLHV
&
0.25*maximum
diameter
of
longitudinal reinforcement
0.25*32=8mm
6SDFLQJRIWKHWLHV
,6
Sv 300mm
FO
&
8 mm @ 300
mm
links
A sh = 0 .09 S D k
f ck
fy
Ag
Dk = 400-2 x 40 + 2 x 8 = 336 mm
Ak = 4 D k2 = 4 x 336
Area of 8 mm bar = 50.26 mm2
Therefore,
88668.3 mm2
,6
FO
,6
75mm
400/ 6 = 40mm
than
30 125663 .7
50.26 = 0.09 x S x336
1
415 88668 .3
or, S= 55.1 mm
6SDFLQJRIKRRSVKRXOGEHOHDVWRI
FO
450mm
distance
LY'HVLJQRI6WDLUFDVH
'RJ/HJJHG6WDLUFDVH
Table 23
Concrete Grade=M30
5HI
6WHS
L
Steel Grade=Fe415
&DOFXODWLRQV
1914mm
3300mm
2XWSXW
1914mm
.QRZQ'DWD
Riser Height, R=175 mm
Tread Height,T=300 mm
Floor Height=3.505m
Flight Width, W=1.5m
No of riser= 20
No. of Treads in the flights=19
Type of staircase= doglegged
Span of stair case=6m
Length of the flights=3.3m
Tan=180/300
= 30.964
/RDG&DOFXODWLRQ
'HDGORDGFDOFXODWLRQIURPVWDLUFDVHVODE
%
B2 + R2
270 2 + 175 2
PP
Assuming Slab Thickness,D=250 mm
Considering 1m Width of Slab
Self Wt.of Slab=DSec=25 x 0.24 x Sec30.964=7.00 KN/m
Wt. of Steps=R/2=25 x .18/2=2.25 KN/m
9cm Thick Floor Finishing= x 0.09=20 x 0.09=1.8 KN/m
Live Load=5 KN/m
:I .1P
,6
&O*E
&O
,6
&O*E
&O
,6
&O*E
&O
LL
Ast x 500
64 x 106 = 0.87 x 500 x Ast x 212 x1
1000 x 212 x 20
Ast=570.858 mm2 >Amin. (.0012 x 1000 x 240)
Required spacing of 10 mm Bars,
C/C Spacing=1000/570.858 x 78.546=137.59 mm
Provide 10 mm @135 mm
)RU&1HJDWLYH0RPHQW$W/RZHU/DQGLQJ
A st x 500
74.35 x 106 = 0.87 x 500 x Ast x 212 x1
1000 x 212 x 20
Ast=669.589 mm2 >Amin. (.0012 x 1000 x 240)
C/C Spacing=1000 x 78.546/669.589=117.295 mm
Provide 10 mm @115 mm
)RU%1HJDWLYH0RPHQWDW8SSHU/DQGLQJ
Moment Mb =60.97 KN/ m
Ast x 500
82.42 x 106 = 0.87 x 500 x Ast x 212 x1
1000
x 212 x 20
2
mm >Amin
Required spacing of 10 mm Bars
C/C Spacing=1000/748.01 x 78.546=105.00
Provide 10 mm @105 mm
:O .1P
$VWUHTG PP
$VWSURG PP
$VWUHTG
PP
$VWSURG
PP
$VWUHTG PP
$VWSURG PP
Ast=748.01
,6
&OF
)LJ
'LVWULEXWRUV5HLQIRUFHPHQW,
Astmin=.0012 x 1000 x 240=360 mm2
Required spacing of 10 mm Bars,
C/C Spacing=1000/360.00 x 78.546=218.167 mm
Provide 10 mm @215 mm
'HYHORSPHQW/HQJWK
Ld =
s
4 bd
Ld = 453.125 mm
Provide Development Length 455 mm
&KHFNLQJIRUGHSWKRIVODE
D=l/(20 x mt)
Percentage of steel,Pt=0.194
For fs=247.54Mpa
mt=1.5
D=7128/(20 x 1.5)=238 mm< 240 mm(O.K)
GUHTGSURY
+HQFH6DIH
Y'HVLJQRIEDVHPHQWZDOO
Introduction
Basement wall is constructed to retain the earth and to prevent moisture from seeping into the
building. Since the basement wall is supported by the mat foundation, the stability is ensured and the
design of the basement wall is limited to the safe design of vertical stem.
Basement walls are exterior walls of underground structures (tunnels and other earth
sheltered buildings), or retaining walls must resist lateral earth pressure as well as additional
pressure due to other type of loading. Basement walls carry lateral earth pressure generally as
vertical slabs supported by floor framing at the basement level and upper floor level. The axial
forces in the floor structures are , in turn, either resisted by shear walls or balanced by the lateral
earth pressure coming from the opposite side of the building.
Although basement walls act as vertical slabs supported by the horizontal floor framing ,
keep in mind that during the early construction stage when the upper floor has not yet been built the
wall may have to be designed as a cantilever.
Design of vertical stem
The basement wall is designed as the cantilever wall with the fixity provided by the mat
foundation.
Soil
Pressure
Due to Surcharge
Basement Wall
(Front Face)
(Rear Face)
Mat Footing
KN/m2
KN/m
)LJ%DVHPHQW:DOO
Y'HVLJQRIEDVHPHQWZDOO
Concrete Grade = M20
5HI
,6
&O
,6
&OD
,6
6WHS
Table 24
&DOFXODWLRQ
Design Constants
Clear height between the floor (h) =5.26 m
unit weight of soil, = 17 KN/m3
Angle of internal friction of the soil, = 300
surcharge produced due to vehicular movement is
Ws = 10 KN/m2
Safe bearing capacity of soil , qs = 90 KN/m2
0RPHQWFDOFXODWLRQ
1 sin 1 sin 30
Ka =
=
= 0.333
1 + sin 1 + sin 30
Lateral load due to soil pressure, Pa = Ka x x h2/2
= 0.333x17x5.262/2
= 23.52 KN/m
Lateral Load due to surcharge load, Ps = Ka x Ws x h
= 0.333x10x5.26
= 17.53 KN/m
Characteristic Bending moment at the base of wall ,
Since weight of wall gives insignificant moment ,so this
can be neglected in the design.
Mc = Pa x h/3 + Ps x h/2
= 23.52x5.3/3 + 11.67x5.3/2
= 71.5KN-m
Design moment, M = 1.5Mc = 1.5x71.5=107.2 KN-m
$SSUR[LPDWHGHVLJQRIVHFWLRQ
Let effective depth of wall = d
BM = 0.136 ckbd2
107.2x106 = 0.136x20x1000xd2
d = 198.5 mm
Let Clear cover is 25mm & bar is 20mm-
Overall depth of wall , D = 198.5+25+10 = 233.5 mm
Take D = 235mm
So , d = 235 25- 10 = 200 mm
&DOFXODWLRQRI0DLQ6WHHO5HLQIRUFHPHQW
bdf ck
4 .6 M
Ast=
1 1
2
2 xf y
f
ck bd
Ast=
1000 x 200 x 20
4.6 x107.2 x10 6
1 1
2 x 415
20 x1000 x 200 2
,6
&OE
,6
&O
,6
7DEOH
,6
&OD
,6
&OG
S=
x 20 2 x1000
4 x1637
=192 mm/m
&KHFNIRU'HIOHFWLRQ
Leff = 5.3+d = 5.3+.2 = 5.5 m
Allowable deflection = leff/250 = 5500/250 = 22 mm
p l 4 eff p a l 4 eff
Actual Deflection = s
+
8EI
30EI
55004 x12
17.53 23.52
+
=
=
30
1000x2353 x5000 25 8
17.64 mm
Which is less than allowable deflection, hence safe.
&DOFXODWLRQRI+RUL]RQWDO5HLQIRUFHPHQWVWHHOEDU
Area of Hz. Reinforcement = 0.002Dh
= 0.002x220x3500 = 1540 mm2
As the temperature change occurs at front face of basement
wall, 2/3 of horizontal reinforcement is provided at front face
and 1/3 of horizontal reinforcement is provided in inner face.
Front face Horizontal Reinforcement steel,
= 2/3x2391.2= 1594 mm2
Providing 12mm- bar
No. of bar required, N = 1594/113 = 14 nos.
Spacing = (h-clear cover at both sides- )/(N-1)
= (4270-30-12)/(14-1) = 325 mm
Provide 12mm- bar @ 320 mm c/c
3W
9X .1
X 1PP
F 1PP
400mm
2100mm
1500mm
Table25
Ref
,6
&/D
,6
&/
,6
&/
,6
&/
,6
&/
Step
Calculation
Output
.QRZQGDWD
Length of lift wall = 1.9 m
Breadth of lift wall = 2.5 m
Floor Height (H) = 2.133 m
Assume, wall thickness t = 200mm
&KHFN)RU6OHQGHUQHVVUDWLR
Effective height of the wall Hwe = 0.75H = 0.75 X 2.133
=1.6 m
Slenderness ratio = Hwe / t
= 1.6 /0.2
= 8 < 30
0LQLPXPHFFHQWULFLW\
emin = 0.05t =0.05 X 200 = 10 mm
$GGLWLRQDOHFFHQWULFLW\
2
2
ea = (H we / 2500 t) = (1600 /2500X200) = 5.12 mm
8OWLPDWHORDGFDUU\LQJFDSDFLW\
Ultimate load carrying capacity per unit length of the wall
is Puw = 0.3 ( t - 1.2e 2ea) X fck
= 0.3 (200 1.2 X 10 2 X 5.12) X 30
= 1599.84 N/mm
Total capacity of wall = 1599.84 X 2.15=3439.656 KN
&DOFXODWLRQIRUPDLQYHUWLFDOUHLQIRUFHPHQW
Assume, clear cover = 20 mm
Using 12 mm dia bar, effective cover = d =26 mm
aZKHQODWHUDOORDGLVDFWLQJDORQJ;GLUHFWLRQ
Mu= 5620.231/2 = 2810.1155 KN-m
Vu = 516.04/2 = 258.02 KN
Pu =4041.37/2 = 2020.685 KN
d/D = 26/2500 =0.0104
(Mu/ fckbd2) = (2810.1155 X106/30 X 200 X 25002) =0.075
Pu/ fckbd = (2020.685 X 103/30 X 200 X 2500) = 0.134
P/fck =0.04
P = 0.04 X 30 = 1.2 %
Min Ast = 0.012 X 200 X 2500 = 6000mm2
Area of 12 mm dia = 113.09 mm2
No of bars = 6000 / 113.09 = 53.05 54nos.
emin= 10mm
ea = 5.12 mm
d = 26mm
,6
&/E
,6
&/E
,6
&/F
,6
&/
Sx = 12 mm
@45 mm
Sy = 12mm
@30mm
&DOFXODWLRQRI+RUL]RQWDO6WHHOUHLQIRUFHPHQW
area of horizontal reinforcement = 0.2 % of bH
= 0.002 X 200 X 2133
= 853.2 mm2
Provide 12 mm bar
No of bars = 853.2/113.09 =7.54 8nos.
Spacing of bars, Sv = 2133/(8 -1)
= 304.71 mm
To take account of the reversal effect, provide 12 mm
bars @ 300 mm c/c on both sides of the wall
&KHFNIRU6KHDU
When lateral load I acting along X- direction Nominal
Shear stress
Tv =Vu/td = Vu/ (t x 0.8 Lw)
= (258.02 x 103)/(200 x 0.8 x 2500)
= 0.64 N/mm2
Allowable Shear Stress
2
Tallowable = 0.17fck = 0.17 x 30 = 5.1 N/mm > Tv
Hw/Lw = 2133/2500 = 0.853 < 1
Tcw should be lesser of
Tcw = (3 - Hw/Lw)K1 fck
Tv = 0.64
2
N/mm
,6
&/D
= (3 0.853) x 0.2 x 30
=2.35 N/mm2
But not less than 0.15fck = 0.1530
= 0.821 N/mm2
2
Therefore, Tcw = 2.35 N/mm > Tv
Hence safe (O.K)
Tcw = 2.35
2
N/mm
O.K
YLL'HVLJQRI0DW)RXQGDWLRQ
Calculation of Corner stresses of mat foundation
x
y
27.02
11.05
'///.1
Description
Summation of Forces (pi)
131083.5
49.66
-6.27
27.9
10.6
Eccentricity
ex
0.88
ey
-0.45
Mex = P X ex
-58987.575
Mey = P x ey
115353.48
-138559.31
11108.01
Area (m2)
1002.1
P/A
130.8
20238
190906
$
$
$
$
$
$
$
$
$
$
%
%
%
%
%
%
%
%
%
%
%
&
&
&
&
&
&
&
&
&
&
'
'
'
'
'
'
'
'
'
'
;
-27.02
-22.83
-16.84
-10.84
-28.47
-27.02
-22.83
-16.84
-10.84
-3.86
2.14
5.80
11.79
18.78
24.77
30.76
-27.02
-22.83
-16.84
-10.84
-3.86
2.14
5.80
11.79
18.78
24.77
30.76
-22.83
-16.84
-10.84
-3.86
2.14
5.80
11.79
18.78
24.77
30.76
-22.83
-16.84
-10.84
-3.86
2.14
5.80
11.79
18.78
24.77
30.76
<
-11.037
-11.037
-11.037
-11.037
-5.704
-7.050
-7.050
-7.050
-7.050
-7.050
-7.050
-7.050
-7.050
-7.050
-7.050
-7.050
-1.056
-1.056
-1.056
-1.056
-1.056
-1.056
-1.056
-1.056
-1.056
-1.056
-1.056
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
8.936
8.936
8.936
8.936
8.936
8.936
8.936
8.936
8.936
8.936
GLVW;
0.00
4.19
10.19
16.18
-1.45
0.00
4.19
10.19
16.18
23.16
29.16
32.82
38.81
45.80
51.79
57.78
0.00
4.19
10.19
16.18
23.16
29.16
32.82
38.81
45.80
51.79
57.78
4.19
10.19
16.18
23.16
29.16
32.82
38.81
45.80
51.79
57.78
4.19
10.19
16.18
23.16
29.16
32.82
38.81
45.80
51.79
57.78
GLVW\
-3.99
-3.99
-3.99
-3.99
1.35
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
11.99
11.99
11.99
11.99
11.99
11.99
11.99
11.99
11.99
11.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
Stress ( ) = (P/A) (M x /I x ) x y (M y /I y ) x x
&RUQHU6WUHVVHVLQ.1P (Table 27)
columns
VWUHVV1PP
E1
E2
E3
E4
O
A1
146.64
149.18
152.80
156.42
130.22
135.02
137.55
141.18
144.80
149.02
152.64
154.85
158.47
162.69
166.32
169.94
117.55
120.08
123.71
127.33
131.55
135.17
137.38
141.00
145.22
148.84
152.47
102.61
106.23
109.86
114.08
117.70
119.91
123.53
127.75
131.37
135.00
90.96
94.58
98.20
102.42
106.05
108.26
111.88
116.10
119.72
123.34
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
'HVLJQRI0DW)RXQGDWLRQ
,6
7DEOH
,6
7DEOH
Table 28
6WHS
&DOFXODWLRQV
.QRZQ'DWD
Upward Soil Pressure, q = 156.41 KN/m2
Max Span Length, L = 6. m
Moment Calculation
Maximum Support Moment, Ms = q L2 / 10
Ms = 115.09 x 6.9062 / 10
= 563.076 KNm per m width
Maximum Span Moment, Mm = q L2 / 12
Mm = 115.09 x 6.9062 / 12
M
2.66 x b
,6
&O
563 . 06 x 10 6
2 . 66 x 1000
= 457.786 mm
But the footing is critical in shear, increase
d = 1000 mm
Providing 20 mm dia. Bar
D = 1000 + 20/2 + 50 =
Check for two way shear i.e Punching Shear
Perimeter, bo = 3.25 m
Nominal Shear stress
v =
1060 mm
d = 1000 mm
D = 1060 mm
Pu
bo x d
=291 . 15 x 10 3
3250 x 500
= 0.423 N/mm2
Permissible punching shear, v =
*E
Depth of footing, d =
,6
$QQH[*
KNm
63
7DEOH'
,6
&O
Output
v = .423N/mm2
x
. 25
ck
20
= 1 x . 25 x
2
= 1.118 N/mm > v
Calculation of Area of steel
Min Ast = 0.12% of bD=
Area of Steel at Support (Bottom Bars)
f
4.6xM
Ast = 0.5x ck (1 1
)xbxd
fy
fckxbxd2
= 0.5 x
20
4.6 x 563x106
(1 1
) x1000x1000
500
20x1000x10002
v = 1.118 N/mm2
Hence Safe
1272 mm2
< Min.
Ast
= 1326.257 mm2
So provide Ast = 1392 mm2
Provide 20 mm bars
Area of each bar, Ab = 314.159 mm2
Provide Ast =
1326mm2
Spacing of Bars ,
Ab
x 1000
A st
314 . 159
=
x 1000
1326
Sv =
= 225.70 mm
Spacing Ok
20mm bar @ 225
mm c/c
,6
$QQH[*
*E
st
Ab
x 1000
Sv
Act. Ast =
1396.260 mm2
314 . 159
x 1000
225
Pt = 0.1204 %
Area of Steel at mid span (Top Bars)
f
4.6 x M
Ast = 0.5 x ck (1 1
)xbxd
fy
f ckx b x d 2
= 0.5 x
314 .159
x 100
1392
= 225.70 mm
Provide 20mm bar @ 225 mm c/c
Act. A
=
st
Spacing Ok
20mm bar @ 225
mm c/c
Ab
x 1000
Sv
314 . 159
225
x 1000
= 1396.260 mm2
Pt = 0.1204 %
Total Pt = 0.1204% + 0.1204% = 0.241%
[ Note: For permissible shear stress calculation
the top and bottom reinforcement can be summed
up but not for the deflection calculation.]
Check for One Way Shear
Shear At Critical Section
TO
DG
,6
7DEOH
.4
TO
Vu = 359.7 KN
For Pt = 0.241%
c = 0.36 N/mm2
c x b x d = 360 KN > Vu
c = 0.36 N/mm2
Hence, Safe
6XPPDU\RI'HVLJQRIWKH0DW)RXQGDWLRQ
Table 29
6WULS:LGWKP
%RWWRP5HLQIRUFHPHQW
'LDPHWHU
6SDFLQJFF
7RS5HLQIRUFHPHQW
'LDPHWHU
6SDFLQJFF
A-A
B-B
C-C
D-D
E-E
6.3
6
6
7
6
20 mm
20 mm
20 mm
20 mm
20 mm
225
225
225
225
225
20 mm
20 mm
20 mm
20 mm
20 mm
225
225
225
225
225
1_1
2_2
3_3
4_4
5_5
6_6
7_7
8_8
9_9
10_10
11_11
4.5
6
6
6
7
6
6
6
7
6
6
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
225
225
225
225
225
225
225
225
225
225
225
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
225
225
225
225
225
225
225
225
225
225
225
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
1.62E+10
C2
C3
C4
C5
C6
C7
C8
C9
1.62E+10
A6
1.62E+10
A5
1.62E+10
A4
1.62E+10
A3
C1
1.62E+10
Iy
A2
Ix
1.62E+10
'
A1
Column
3505.00
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
0.00
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
69548.11
3048.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
KY
374334.14
374334.14
374334.14
374334.14
374334.14
374334.14
374334.14
374334.14
2000.00
3505.00
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
0.00
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
30910.27
3048.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
1200.00
166370.73
166370.73
166370.73
166370.73
166370.73
166370.73
166370.73
166370.73
2000.00
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
1200.00
KX
6WLIIQHVV&DOFXODWLRQ(Table 30)
9146.97
9146.97
10013.01
10013.01
9146.97
9146.97
9146.97
10013.01
0.00
8928.80
8928.80
8418.82
8418.82
10013.01
10013.01
8418.82
8418.82
8928.80
8928.80
10013.01
8928.80
8928.80
8418.82
8418.82
10013.01
10013.01
8418.82
8418.82
8928.80
8928.80
10013.01
(keff)y
4065.32
4065.32
4450.23
4450.23
4065.32
4065.32
4065.32
4450.23
0.00
3968.35
3968.35
3741.70
3741.70
4450.23
4450.23
3741.70
3741.70
3968.35
3968.35
4450.23
3968.35
3968.35
3741.70
3741.70
4450.23
4450.23
3741.70
3741.70
3968.35
3968.35
4450.23
(keff)X
11.99
11.99
11.99
11.99
11.99
11.99
11.99
11.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
5.99
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
along y
arm
Lever
48735.08
48735.08
53349.33
53349.33
48735.08
48735.08
48735.08
53349.33
0.00
23786.31
23786.31
22427.73
22427.73
26674.67
26674.67
22427.73
22427.73
23786.31
23786.31
26674.67
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
about x
Moment
45.80
38.81
32.82
29.16
23.16
16.18
10.19
4.19
57.78
51.79
45.80
38.81
32.82
29.16
23.16
16.18
10.19
4.19
0.00
57.78
51.79
45.80
38.81
32.82
29.16
23.16
16.18
10.19
4.19
0.00
along x
Arm
Lever
418885.66
354994.05
328587.04
291959.43
211880.50
147988.89
93161.93
41964.54
0.00
515932.60
462413.40
385539.78
326734.34
328587.04
291959.43
195013.51
136208.06
90939.78
37420.58
0.00
515932.60
462413.40
385539.78
326734.34
328587.04
291959.43
195013.51
136208.06
90939.78
37420.58
0.00
about y
Moment
6868.95
8140.98
8140.98
6868.95
6868.95
8140.98
2.624E+12
2.624E+12
4.27E+09 4.369E+12
2.624E+12
3.4E+09
2.624E+12
2.624E+12
3.6E+09
4.27E+09 4.369E+12
2.624E+12
3.6E+09
3.6E+09
3.6E+09
2.20E+12
3.6E+09
3.6E+09
4.27E+09 4.369E+12
St wall3,2
St wall3,3
St wall3,4
St wall3,5
St wall3,6
St wall 4(3)
St wall 5,1
St wall 5,2
St wall 5,3
6868.95
4197691.35
6868.95
6868.95
163203.52
St wall3,1
107327.34
107327.34
1E+09
9.6E+11
Lift
5.63E+10
9.007E+11 1832292.27
9.6E+11
Lift
St wall2,2
2397.72
Circular
163203.52
2386.05
E4
1E+09
2386.05
E3
5.63E+10
2386.05
E2
St wall2,1
2386.05
E1
1614445.41
2386.05
D11
2386.05
D10
St wall1,2
2386.05
D9
2786210.53
2386.05
D8
1614445.41
2386.05
D7
9.007E+11 1832292.27
2386.05
D6
2386.05
D5
St wall1,1
2786210.53
2386.05
3646.01
2386.05
D4
0.00
D3
2386.05
105755.88
105755.88
69548.11
69548.11
Kx
D2
1.62E+10
D1
1.62E+10
Iy
Ix
'
C11
C10
Column
8336360.61
5007464.17
5007464.17
2901.40
2901.40
6228.33
6228.33
2613287.33
2613287.33
3646.01
47002.61
47002.61
207728852.39
124778045.70
124778045.70
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
202860.21
171163.30
171163.30
6487.34
5007464.17
5007464.17
8336360.61
8336360.61
5007464.17
5007464.17
1908.04
1908.04
4095.93
4095.93
1718573.00
1718573.00
2397.72
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
0.00
30910.27
30910.27
Ky
7826.88
6603.93
6603.93
2098845.67
6868.95
6868.95
8140.98
8140.98
6868.95
6868.95
12992.00
12992.00
128519.78
128519.78
240983.23
240983.23
266.41
1193.02
1193.02
1193.02
1193.02
795.35
795.35
795.35
795.35
1193.02
1193.02
1193.02
1193.02
1193.02
1193.02
0.00
10013.01
9146.97
(keff)x
8014722.03
4814263.12
4814263.12
3243.67
5007464.17
5007464.17
8336360.61
8336360.61
5007464.17
5007464.17
230.97
230.97
495.81
495.81
226026.86
226026.86
266.41
1193.02
1193.02
1193.02
1193.02
795.35
795.35
795.35
795.35
1193.02
1193.02
1193.02
1193.02
1193.02
1193.02
4450.23
4065.32
(keff)y
16.35
16.35
16.35
3.00
0.10
0.10
0.10
0.10
0.10
0.10
0.97
0.97
2.47
2.47
2.73
2.73
1.35
-3.99
-3.99
-3.99
-3.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
15.99
11.99
11.99
along y
arm
Lever
131040705.26
78713201.95
78713201.95
9731.01
500746.42
500746.42
833636.06
833636.06
500746.42
500746.42
224.04
224.04
1224.66
1224.66
617957.44
617957.44
358.59
-4756.58
-4756.58
-4756.58
-4756.58
12714.44
12714.44
12714.44
12714.44
19071.66
19071.66
19071.66
19071.66
19071.66
19071.66
0.00
53349.33
48735.08
about x
Moment
19.70
13.20
7.20
58.06
54.86
48.86
42.36
19.70
13.20
7.20
41.70
20.00
46.06
16.40
41.52
20.45
-1.45
16.18
10.19
4.19
0.00
57.78
51.79
45.80
38.81
32.82
29.16
23.16
16.18
10.19
4.19
57.78
51.79
along x
Arm
Lever
154189.48
87171.84
47548.28
121852683.33
376809.96
335596.26
344827.37
160377.25
90670.13
49456.44
541805.52
259814.09
5919235.43
2107724.37
10005141.77
4928830.02
-385.77
19301.92
12150.94
4999.96
0.00
45957.63
41190.31
36422.99
30867.48
39150.24
34786.16
27635.18
19301.92
12150.94
4999.96
0.00
578581.93
473712.62
about y
Moment
1.17E+09 9.046E+10
2.2E+11
7.776E+11
7.776E+11
2.624E+12
2.624E+12
2.07E+12
2.4E+09
2.4E+09
3.6E+09
3.6E+09
St wall 6
St wall 7
St wall 8
SWE1
28.79
2.89
Centre of mass
ex
ey
25.90
Cetner of Stiffness
TOTAL
SWE3
SWE2
-2.38
5.81
8.19
2235.46
4.97E+11 2.067E+09
St wall 5,9
947374.42
2.624E+12
3.6E+09
St wall 5,8
SW9
6868.95
2.624E+12
3.6E+09
St wall 5,7
17483254.34
6868.95
4579.30
4579.30
6868.95
3943921.83
6868.95
6868.95
8140.98
2.624E+12
3.6E+09
4.27E+09 4.369E+12
St wall 5,6
6868.95
3888.59
2.624E+12
3.6E+09
Iy
Ix
2.04E+09 4.761E+11
'
St wall 5,5
St wall 5,4
Column
102387780.63
5007464.17
1483693.09
1483693.09
5007464.17
419769.13
172601.44
3943.29
5007464.17
5007464.17
8336360.61
5007464.17
908495.72
5007464.17
Ky
98260.41
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
23607064.21
Kx
6174943.25
3434.47
4579.30
2289.65
3434.47
1971960.91
1117.73
910822.24
6868.95
6868.95
8140.98
6868.95
3888.59
6868.95
(keff)x
91756223.04
2503732.09
1483693.09
741846.54
2503732.09
209884.57
86300.72
3791.14
5007464.17
5007464.17
8336360.61
5007464.17
908495.72
5007464.17
(keff)y
-4.07
0.10
-4.07
-4.07
3.63
12.34
14.00
16.35
16.35
16.35
16.35
16.35
16.35
along y
arm
Lever
751601055.81
-10177670.93
148369.31
-3015606.20
-10177670.93
760831.56
1064950.86
53076.01
81872039.20
81872039.20
136299496.04
81872039.20
14853905.08
81872039.20
about x
Moment
13.20
2.10
2.10
7.20
-0.75
2.87
4.00
54.86
48.86
42.36
35.86
31.03
26.20
along x
Arm
Lever
159929763.88
45335.07
9593.63
4796.82
24728.22
-1478970.69
3207.89
3643288.94
376809.96
335596.26
344827.37
246299.92
120659.02
179966.48
about y
Moment
6WRUH\6WLIIQHVV
Table 31
Column
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
E1
E2
E3
E4
Circular
Lift
Lift
St wall1
St wall1
St wall2
St wall2
Basement
Kx
Ky
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
0.00
0.00
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
0.00
0.00
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2397.72
2397.72
1832292.27
1718573.00
1832292.27
1718573.00
1061705.79
4095.93
1061705.79
4095.93
107327.34
1908.04
107327.34
1908.04
semi-basement
kx
ky
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
0.00
0.00
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
0.00
0.00
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2397.72
2397.72
1832292.27
1718573.00
1832292.27
1718573.00
1061705.79
4095.93
1061705.79
4095.93
107327.34
1908.04
107327.34
1908.04
ground floor
kx
ky
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
0.00
0.00
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
69548.11
30910.27
0.00
0.00
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2386.05
2397.72
1832292.27
1832292.27
1061705.79
1061705.79
107327.34
107327.34
2397.72
1718573.00
1718573.00
4095.93
4095.93
1908.04
1908.04
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Basement
Kx
Ky
St wall3,1
6868.95
5007464.17
St wall3,2
6868.95
5007464.17
St wall3,3
8140.98
8336360.61
St wall3,4
8140.98
8336360.61
St wall3,5
6868.95
5007464.17
St wall 4(1) 948296.64
3943.92
St wall 4(2) 4197691.35
6487.34
St wall 4(3) 4197691.35
6487.34
St wall 5,1
6868.95
5007464.17
St wall 5,2
6868.95
5007464.17
St wall 5,3
8140.98
8336360.61
St wall 5,4
6868.95
5007464.17
St wall 5,5
3888.59
908495.72
St wall 5,6
6868.95
5007464.17
St wall 5,7
8140.98
8336360.61
St wall 5,8
6868.95
5007464.17
St wall 5,9
6868.95
5007464.17
St wall 6
947374.42
3943.29
St wall 7
2235.46
172601.44
St wall 8
3943921.83
419769.13
SW9
4579.30
1483693.09
Total
22464959.95 85830305.75
Column
semi-basement
kx
ky
948296.64
4197691.35
4197691.35
171163.30
171163.30
202860.21
3943.92
6487.34
6487.34
124778045.70
124778045.70
207728852.39
23607064.21
2235.46
3943921.83
98260.41
172601.44
419769.13
45566984.21
462404757.85
ground floor
kx
ky
8101036.11
4388404.02
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
first floor
Column
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
E1
E2
E3
E4
Circular
Lift
Lift
St wall1
St wall1
St wall2
St wall2
Total
second floor
third floor
kx
ky
kx
ky
kx
ky
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
12515553.17
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6752563.79
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
12515553.17
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6752563.79
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
12515553.17
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6752563.79
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
fourth floor
Column
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
E1
E2
E3
E4
Circular
Lift
Lift
St wall1
St wall1
St wall2
St wall2
Total
fifth floor
sixth floor
kx
ky
kx
ky
kx
ky
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
12515553.17
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6752563.79
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
12515553.17
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6752563.79
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
105755.88
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
12515553.17
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
3646.01
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6752563.79
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
pent house
Column
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
E1
E2
E3
E4
Circular
Lift
Lift
St wall1
St wall1
St wall2
St wall2
Total
last
kx
ky
kx
ky
105755.88
105755.88
105755.88
105755.88
47002.61
47002.61
47002.61
47002.61
374334.14
374334.14
105755.88
105755.88
166370.73
166370.73
47002.61
47002.61
105755.88
105755.88
105755.88
105755.88
47002.61
47002.61
47002.61
47002.61
105755.88
105755.88
374334.14
374334.14
47002.61
47002.61
166370.73
166370.73
105755.88
105755.88
105755.88
105755.88
47002.61
47002.61
47002.61
47002.61
105755.88
105755.88
105755.88
105755.88
0.00
47002.61
47002.61
47002.61
47002.61
0.00
374334.14
374334.14
105755.88
105755.88
0.00
0.00
105755.88
105755.88
374334.14
374334.14
166370.73
166370.73
47002.61
47002.61
0.00
0.00
47002.61
47002.61
166370.73
166370.73
105755.88
105755.88
105755.88
47002.61
47002.61
47002.61
105755.88
105755.88
105755.88
47002.61
47002.61
47002.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
2786210.53
2786210.53
1614445.41
1614445.41
163203.52
163203.52
11454348.34
2613287.33
2613287.33
6228.33
6228.33
2901.40
2901.40
6278891.63
3840720.16
1706986.74
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
10584.3 KN
FRAME
FRAME
E1-E4
A1-A11
SW3
SW1
SW2
LIFT
O
SWE
SW8
B1-B11
C2-C11
41614.00
SW7
5007464.17
SW6-SW4,1
5915959.89
D2-D11
38449.38
SW5,1-SW5,9 27661420.28
SW9
5007464.17
84333593.06
5.22
628.46
742.48
4.83
3471.65
628.46
9944.53
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
E-E
Frame
A-A
Frame
B-B
Frame
C-C
Frame
D-D
Frame
SW3
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q(KN) storey shear(KN
semi basement
465.03
7.01
22851.58
0.50
0.39
0.39
basement
498.72
3.51
6126.79
0.50
0.11
0.50
total
963.75
28978.37
0.62
0.52
0.82
0.76
0.60
0.45
0.33
0.22
0.13
0.08
0.02
storey shear
0.62
1.14
1.96
2.72
3.32
3.77
4.09
4.32
4.45
4.53
4.55
0.56
0.67
1.12
0.93
0.74
0.56
0.41
0.28
0.17
0.10
0.02
storey shear
0.56
1.23
2.34
3.28
4.01
4.57
4.98
5.26
5.43
5.52
5.55
0.00
0.59
1.21
0.98
0.77
0.58
0.42
0.28
0.21
0.15
0.03
storey shear
0.00
0.59
1.80
2.78
3.54
4.13
4.55
4.83
5.04
5.19
5.22
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q
storey shear
ground
203.18
10.52
22464.46
4.83
1.07
1.07
semi basement
1154.06
7.01
56710.78
4.83
2.71
3.79
basement
1769.29
3.51
21735.74
4.83
1.04
4.83
total
42361.37
100910.98
load
basement
Vb,X
force, Q
storey shear
12.29 3349.50
3349.50
3349.50
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
O-O
Frame
SW8
Frame
SW1
Frame
LIFT
Frame
SW2
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q
sixth
25.28
28.80
20974.49
0.03
fifth
52.34
25.76
34720.26
0.03
fourth
52.69
22.71
27167.97
0.03
53.04
19.66
20498.38
0.03
third
second
53.39
16.61
14730.87
0.03
first
53.74
13.56
9884.85
0.03
34.18
10.52
3778.72
0.03
ground
85.67
7.01
4209.91
0.03
semi basement
basement
36.43
3.51
447.55
0.03
total
446.76
136413.00
0.01
0.01
0.01
0.01
0.00
0.00
0.00
0.00
0.00
storey shear
0.01
0.01
0.02
0.03
0.03
0.03
0.03
0.03
0.03
Vb,X
force, Q
storey shear
49.14 1046.26
837.00
837.00
12.29 1046.26
209.25
1046.26
61.43
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q
storey shear
Pent
1.00
31.85
1014.49
56.74
14.24
14.24
sixth
1.00
28.80
829.61
56.74
11.65
25.89
fifth
1.00
25.76
663.32
56.74
9.31
35.20
fourth
1.00
22.71
515.61
56.74
7.24
42.44
1.00
19.66
386.48
56.74
5.43
47.86
third
second
1.00
16.61
275.93
56.74
3.87
51.74
first
1.00
13.56
183.95
56.74
2.58
54.32
1.00
10.52
110.57
56.74
1.55
55.87
ground
semi basement
1.00
7.01
49.14
56.74
0.69
56.56
basement
1.00
3.51
12.29
56.74
0.17
56.74
total
10.00
4041.37
0.05
0.04
0.03
0.02
0.02
0.01
0.01
0.01
0.00
0.00
storey shear
0.05
0.08
0.11
0.14
0.15
0.17
0.18
0.18
0.18
0.18
0.03
0.03
0.02
0.02
0.01
0.01
0.01
0.00
0.00
0.00
storey shear
0.03
0.06
0.08
0.09
0.10
0.11
0.12
0.12
0.12
0.12
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
SW7
Frame
SW4,3
Frame
SW4,2
load
load, w(KN) h,(m)
wh2
1.00
7.01
semi basement
basement
1.00
3.51
total
17.00
49.14
12.29
61.43
49.14
12.29
61.43
49.14
12.29
61.43
FRAME
load
load, w(KN) h,(m)
wh2
1.00
9.02
semi basement
SWIMMING
1.00
5.51
SW6-SW4,1
BASEMENT
1.00
3.51
Frame
SW3
load
basement
total
81.27
30.36
12.32
123.95
Vb,X
force, Q
storey shear
628.46
502.77
502.77
628.46
125.69
628.46
Vb,X
force, Q
storey shear
0.00
0.00
0.00
0.00
0.00
0.00
Vb,X
force, Q
storey shear
0.00
0.00
0.00
0.00
0.00
0.00
Vb,X
force, Q
storey shear
742.48
486.82
486.82
742.48
181.86
668.68
742.48
73.80
742.48
Vb,X
force, Q
storey shear
12.29 3349.50
3349.50
3349.50
12.29
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
O-O
Frame
E1-D1
Frame
SW8
Frame
SW7
Frame
SW6
Frame
E2-D2
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q storey shear
sixth
25.28
28.80
20974.49
0.55
0.08
0.08
fifth
52.34
25.76
34720.26
0.55
0.14
0.23
fourth
52.69
22.71
27167.97
0.55
0.11
0.34
third
53.04
19.66
20498.38
0.55
0.08
0.42
53.39
16.61
14730.87
0.55
0.06
0.48
second
first
53.74
13.56
9884.85
0.55
0.04
0.52
34.18
10.52
3778.72
0.55
0.02
0.53
ground
semi basement
85.67
7.01
4209.91
0.55
0.02
0.55
basement
36.43
3.51
447.55
0.55
0.00
0.55
total
446.76
136413.00
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q storey shear
Roof
0.00
34.90
0.00
43.99
0.00
0.00
Pent
0.00
31.85
0.00
43.99
0.00
0.00
sixth
222.37
28.80
184482.31
43.99
8.20
8.20
fifth
277.50
25.76
184070.37
43.99
8.18
16.38
fourth
409.10
22.71
210935.50
43.99
9.38
25.76
third
413.02
19.66
159623.07
43.99
7.10
32.86
365.21
16.61
100770.94
43.99
4.48
37.34
second
first
368.68
13.56
67820.05
43.99
3.01
40.35
ground
399.76
10.52
44200.03
43.99
1.96
42.32
semi basement
638.42
7.01
31372.01
43.99
1.39
43.71
basement
507.06
3.51
6229.23
43.99
0.28
43.99
total
3601.12
989503.52
49.14
12.29
61.43
49.14
12.29
61.43
49.14
12.29
61.43
Vb,X
force, Q storey shear
16.88
13.50
13.50
16.88
3.38
16.88
Vb,X
force, Q storey shear
14.24
11.39
11.39
14.24
2.85
14.24
Vb,X
force, Q storey shear
8.06
6.45
6.45
8.06
1.61
8.06
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
load
swimming
SW3,1-SW5,1 basement
Total
Frame
E3-D3
load
swimming
SW3,2-SW5,2 basement
Total
E4-D4
Frame
SW1,1
Frame
Vb,X
force, Q storey shear
1.44 1929.31
117.84
117.84
22.14 1929.31 1811.47
1929.31
23.58
Frame
Frame
Vb,X
force, Q storey shear
1.44 6265.97
382.70
382.70
22.14 6265.97 5883.27
6265.97
23.58
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q storey shear
Roof
165.22
34.90
201223.21
79.21
3.66
3.66
Pent
726.79
31.85
737313.76
79.21
13.41
17.07
sixth
1050.84
28.80
871790.01
79.21
15.85
32.92
fifth
1106.72
25.76
734110.97
79.21
13.35
46.27
fourth
1128.02
22.71
581617.08
79.21
10.58
56.85
1134.92
19.66
438620.49
79.21
7.98
64.83
third
1170.62
16.61
323004.29
79.21
5.87
70.70
second
first
1191.92
13.56
219260.00
79.21
3.99
74.69
1189.43
10.52
131509.67
79.21
2.39
77.08
ground
semi basement
1901.08
7.01
93419.15
79.21
1.70
78.78
basement
1929.08
3.51
23698.84
79.21
0.43
79.21
Total
12694.64
4355567.48
load
swimming
SW3,3-SW5,3 basement
Total
1.44
22.14
23.58
Vb,X
force, Q storey shear
30.25
1.85
1.85
30.25
28.40
30.25
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
SW2,1
Frame
LIFT1
Frame
A5-D5
Frame
SW5,4
Frame
A6-D6
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q storey shear
Pent
1.00
31.85
1014.49 266.42
66.88
66.88
sixth
1.00
28.80
829.61 266.42
54.69
121.57
fifth
1.00
25.76
663.32 266.42
43.73
165.30
fourth
1.00
22.71
515.61 266.42
33.99
199.29
1.00
19.66
386.48 266.42
25.48
224.77
third
second
1.00
16.61
275.93 266.42
18.19
242.96
first
1.00
13.56
183.95 266.42
12.13
255.08
1.00
10.52
110.57 266.42
7.29
262.37
ground
semi basement
1.00
7.01
49.14 266.42
3.24
265.61
basement
1.00
3.51
12.29 266.42
0.81
266.42
Total
10.00
4041.37
load
basement
Total
12.29
12.29
Vb,X
force, Q storey shear
13.69
13.69
13.69
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
SW5,5
Frame
A7-D7
Frame
SW5,6
Frame
A8-D8
Frame
load
basement
Total
LIFT2
12.29
12.29
Vb,X
force, Q storey shear
16.23
16.23
16.23
load
basement
Total
12.29
12.29
Vb,X
force, Q storey shear
14.24
14.24
14.24
load
basement
SW3,4-SW5,7
Total
Frame
12.29
12.29
Vb,X
force, Q storey shear
14.24
14.24
14.24
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
SW2,2
Frame
SW1,2
Frame
load
load, w(KN) h,(m)
wh2
Vb,X
force, Q storey shear
Pent
1.00
31.85
1014.49 266.42
66.88
66.88
sixth
1.00
28.80
829.61 266.42
54.69
121.57
fifth
1.00
25.76
663.32 266.42
43.73
165.30
fourth
1.00
22.71
515.61 266.42
33.99
199.29
1.00
19.66
386.48 266.42
25.48
224.77
third
second
1.00
16.61
275.93 266.42
18.19
242.96
first
1.00
13.56
183.95 266.42
12.13
255.08
1.00
10.52
110.57 266.42
7.29
262.37
ground
semi basement
1.00
7.01
49.14 266.42
3.24
265.61
basement
1.00
3.51
12.29 266.42
0.81
266.42
total
10.00
4041.37
load
basement
SW3,5-SW5,8
total
Frame
A9-D9
Frame
A10-D10
12.29
12.29
Vb,X
force, Q storey shear
16.88
16.88
16.88
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Frame
SW5,9
Frame
A11-D11
Frame
SW4
Frame
SW9
load
basement
total
12.29
12.29
Vb,X
force, Q storey shear
31.12
31.12
31.12
load
basement
total
12.29
12.29
load
basement
total
12.29
12.29
Vb,X
force, Q storey shear
14.24
14.24
14.24
Vb,X
force, Q storey shear
28.48
28.48
28.48
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Concrete
Marble
Plaster
Tile(25mm)
25
26.7
20.4
6
Inner Plaster
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.025
0.02
0.025
0.012
Total load
Live Load
(without L.L)
KN/m2
5.48
4.00
5.48
4.00
6.48
3.00
5.48
4.00
5.48
4.00
5.48
3.00
5.48
4.00
5.48
4.00
5.48
4.00
6.48
4.00
6.48
4.00
5.48
4.00
5.48
4.00
6.48
6.48
4.00
5.48
4.00
6.48
4.00
5.48
4.00
5.48
4.00
6.48
4.00
5.48
4.00
5.48
4.00
15.48
1.00
15.48
1.00
15.48
1.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
Marble
Plaster
Tile
Inner Plaster
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Slab
Unit Weights
Total Load
(With L.L)
9.48
9.48
9.48
9.48
9.48
8.48
9.48
9.48
9.48
10.48
10.48
9.48
9.48
6.48
10.48
9.48
10.48
9.48
9.48
10.48
9.48
9.48
16.48
16.48
16.48
9.48
9.48
9.48
9.48
9.48
m
m
m
m
Normal Room
Bed Rooms
Corridors
Store & Corridors
Staircase
Kitchen and Dining
Normal Room
Normal Room
Normal Room
Normal Room
Normal Room
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Normal Room
Normal Room
Normal Room
Normal Room
No slab
No slab
Balcony(cantilever)
No slab
No slab
No Slab
Cantilever
Cantilever
Remarks
(For live load)
Unit Wt.Conc. 25
KN/m3
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Concrete
Marble
Plaster
Tile(25mm)
25
26.7
20.4
6
KN/m3
KN/m3
KN/m3
KN/m3
0.24
0.24
0.24
0.24
0.24
0.24
Inner Plaster
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
Total load
Live Load
(without L.L)
KN/m2
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
6.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
6.48
4.00
5.48
4.00
5.48
2
6.48
4.00
5.48
4.00
6.48
4.00
6.48
4.00
6.48
4.00
6.48
4.00
5.48
4.00
6.48
4.00
1.00
1.00
1.00
1.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
5.48
4.00
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Slab
Unit Weights
Total Load
(With L.L)
9.48
9.48
9.48
9.48
9.48
9.48
10.48
9.48
9.48
9.48
9.48
10.48
9.48
7.48
10.48
9.48
10.48
10.48
10.48
10.48
9.48
10.48
2.00
2.00
9.48
9.48
9.48
9.48
9.48
9.48
m
m
m
m
Normal Room
Bed Rooms
Corridors
Store & Corridors
Staircase
Kitchen and Dining
Normal Room
Normal Room
Normal Room
Normal Room
Normal Room
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Normal Room
Normal Room
Normal Room
Normal Room
No slab
No slab
Balcony(cantilever)
No slab
No slab
No Slab
Cantilever
Cantilever
Remarks
(For live load)
Unit Wt.Conc. 25
KN/m3
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Concrete
Marble
Plaster
Tile(25mm)
25
26.7
20.4
6
KN/m3
KN/m3
KN/m3
KN/m3
0.24
0.24
0.24
Inner Plaster
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
Thickness of
0.025
0.02
0.025
0.012
Total load
Live Load
(without L.L)
KN/m2
6.32
2.00
6.32
2.00
6.82
3.00
6.82
3.00
6.32
3.00
6.82
2.00
0.00
0.00
5.32
3.00
5.32
3.00
5.32
3.00
5.32
3.00
6.82
3.00
6.82
2.00
6.32
3
6.32
2.00
6.32
2.00
0.00
0.00
5.32
3.00
6.82
3.00
5.32
3.00
5.32
3.00
0.00
0.00
0.00
0.00
6.32
2.50
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
5.32
3.00
5.32
3.00
Marble
Plaster
Tile
Inner Plaster
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Slab
Unit Weights
Ground Floor
8.32
8.32
Total Load
(With L.L)
8.32
8.32
9.82
9.82
9.32
8.82
0.00
8.32
8.32
8.32
8.32
9.82
8.82
9.32
8.32
8.32
0.00
8.32
9.82
8.32
8.32
0.00
0.00
8.82
m
m
m
m
Remarks
(For live load)
Normal Room
Bed Rooms
Corridors
Store & Corridors
Staircase
Kitchen and Dining
Void
Normal Room
Normal Room
Normal Room
Normal Room
Normal Room
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Void
Normal Room
Normal Room
Normal Room
Normal Room
No slab
No slab
Balcony(cantilever)
No slab
No slab
No slab
No Slab
Cantilever
Cantilever
O-A1
O-B1
A1-A2
A2-A3
A3-A4
A4-A5
A5-A6
A6-A7
A7-A8
A8-A9
A9-A10
A10-A11
B1-B2
B2-B3
B3-B4
B4-B5
B5-B6
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11
C1-C2
C2-C3
C3-C4
C4-C5
C5-C6
C6-C7
C7-C8
C8-C9
C9-C10
C10-C11
A1-B1
A2-B2
A3-B3
A1-B1
A2-B2
Beam
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.35
0.35
Unit Wt.Conc. 25
1.98
4.87
4.20
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
2.50
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.98
2.98
KN/m
Dead Load
KN/m3
5.05
12.42
10.71
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
6.38
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
15.30
15.30
15.30
17.85
17.85
KN
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.32
6.82
6.82
6.32
6.82
0.00
5.32
5.32
5.32
5.32
6.82
6.82
6.32
6.32
6.32
0.00
5.32
6.82
5.32
5.32
6.32
6.32
6.82
5.48
5.48
KN/m2
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
0.00
6.00
6.00
0.00
6.00
Ly
Area
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
4.20
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
0.00
4.20
6.00
0.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
4.41
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
3.13
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
2.04
8.19
9.00
2.04
8.19
6.32
6.32
6.32
6.82
6.82
6.32
6.82
0.00
5.32
5.32
5.32
5.32
6.82
6.82
6.32
6.32
6.32
0.00
5.32
6.82
5.32
5.32
0.00
0.00
0.00
6.32
0.00
0.00
0.00
0.00
5.32
5.32
6.32
6.82
6.82
5.48
5.48
KN/m2
8.32
8.32
8.32
9.82
9.82
9.32
8.82
0.00
8.32
8.32
8.32
8.32
9.82
8.82
9.32
8.32
8.32
0.00
8.32
9.82
8.32
8.32
0.00
0.00
0.00
8.82
0.00
0.00
0.00
0.00
8.32
8.32
8.32
9.82
9.82
9.48
9.48
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
Ly
Area
4.20
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
2.00
2.00
4.20
6.00
6.00
4.20
6.00
0.67
1.65
4.41
9.00
9.00
12.00
9.00
0.00
9.00
12.00
9.00
9.00
3.13
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
8.00
8.00
8.19
9.00
9.00
8.19
9.00
Lx (Triangle or Trap.
Lx (Triangle or Trap.)
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
8.32
9.82
9.82
9.32
8.82
0.00
8.32
8.32
8.32
8.32
9.82
8.82
9.32
8.32
8.32
0.00
8.32
9.82
8.32
8.32
8.32
8.32
9.82
9.48
9.48
5.57
13.73
36.69
88.38
88.38
111.84
79.38
0.00
74.88
99.84
74.88
74.88
67.38
167.77
172.27
211.69
154.27
0.00
149.77
217.69
149.77
149.77
0.00
79.38
83.88
99.84
74.88
0.00
74.88
117.84
141.45
141.45
85.12
156.53
176.77
96.98
162.97
KN
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
0.00
3.05
3.05
3.05
3.05
3.05
3.60
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
3.60
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
1.90
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
5.10
5.10
5.10
5.10
5.10
34.11
51.17
51.17
60.64
51.17
0.00
51.17
60.64
51.17
51.17
34.11
0.00
0.00
60.64
51.17
0.00
0.00
0.00
51.17
0.00
0.00
0.00
51.17
60.64
51.17
0.00
51.17
60.64
0.00
0.00
48.32
0.00
0.00
0.00
0.00
9 inch (KN)
10.62
26.15
81.51
154.85
154.85
190.33
145.85
0.00
141.35
178.33
141.35
141.35
112.20
183.07
187.57
290.18
220.73
9.33
165.07
235.54
216.23
165.07
0.00
94.68
150.35
178.33
141.35
9.33
141.35
196.33
156.75
156.75
148.74
171.83
192.07
114.83
180.82
Beam
Concrete
Marble
Plaster
Tile(25mm)
Thickness
m
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.00
0.16
0.16
0.16
0.16
0.00
0.00
0.16
0.00
0.00
0.16
0.16
0.16
0.00
Unit Weights
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
B10-B11-C10-C11
C2-C3-D2-D3
C3-C4-D3-D4
C4-C5-D4-D5
C5-C6-D5-D6
C6-C7-D6-D7
C7-C8-D7-D8
C8-C9-D8-D9
C9-C10-D9-D10
C10-C11-D10-D11
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
0.00
4.00
4.00
4.00
4.00
0.00
0.00
4.00
0.00
0.00
4.00
4.00
4.00
0.00
Dead Load
KN/m2
25
26.7
20.4
6
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.00
0.41
0.41
0.41
0.41
0.00
0.00
0.41
0.00
0.00
0.41
0.41
0.41
0.00
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.00
0.67
0.67
0.67
0.67
0.00
0.00
0.67
0.00
0.00
0.67
0.67
0.67
0.00
Marble
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
0.00
0.00
0.24
0.00
0.00
0.24
0.24
0.24
0.00
Inner Plaster
KN/m2
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.82
6.32
0.00
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
3.00
3.00
3.00
0.00
3.00
2.00
2.00
3.00
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
2.00
3
2.00
2.00
0.00
2.00
2.00
2.00
2.00
0.00
0.00
3.00
0.00
Live Load
KN/m2
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.00
1.50
1.00
0.00
1.00
1.50
1.00
1.00
0.00
0.00
1.00
0.00
0.00
1.00
1.50
1.00
0.00
Partition walls
KN/m2
Thickness of
First Floor
3.00
2.00
2.00
3.00
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
2.00
3.00
2.00
2.00
0.00
2.00
2.00
2.00
2.00
0.00
0.00
3.00
0.00
0.00
3.00
3.00
3.00
0.00
Reduced
LL
m
m
m
m
9.32
8.82
8.82
9.82
9.82
8.82
8.82
8.82
9.82
8.82
8.82
8.82
8.82
9.32
8.82
8.32
0.00
8.32
8.82
8.32
8.32
0.00
0.00
9.32
0.00
0.00
9.32
9.82
9.32
0.00
Total Load
(With L.L)
Remarks
(For live load)
Balcony
Bed Rooms
Kitchen and Dining
Store & Corridors
Staircase
Kitchen and Dining
Kitchen and Dining
Kitchen and Dining
Store & Corridors
Kitchen and Dining
Normal Room
Toilet/Bathroom
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Void
Bed Rooms & W/C
Kitchen and Dining
Bedrooms & W/C
Bed Rooms
No slab
No slab
Balcony(cantilever)
No slab
No slab
Balcony(cantilever)
Cantilever
Cantilever
No slab
A3-B3
A4-B4
A5-B5
A6-B6
A7-B7
A8-B8
A9-B9
A10-B10
A11-B11
B1-C1
B2-C2
B3-C3
B4-C4
B5-C5
B6-C6
B7-C7
B8-C8
B9-C9
B10-C10
B11-C11
D1-D2
D2-D3
D3-D4
D4-D5
D5-D6
D6-D7
D7-D8
D8-D9
D9-D10
D10-D11
C1-D1
C2-D2
C3-D3
C4-D4
C5-D5
C6-D6
C7-D7
C8-D8
C9-D9
C10-D10
C11-D11
Beam
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.3
0.3
0.3
0.3
0.3
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
7.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0
0
2
2
2
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
2.55
2.55
2.55
0.00
0.00
0.00
0.00
0.00
0.00
0
0
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
Dead Load
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
0.00
0.00
0.00
0.00
0.00
0.00
17.85
15.30
15.30
0.00
0.00
0.00
0.00
0.00
0.00
0
0
5.1
5.1
5.1
KN
0.00
0.00
0.00
0.00
0.00
0.00
0
0
0
5.3203
5.3203
6.82
6.82
6.32
6.82
0.00
5.32
5.32
5.32
5.32
0.00
6.82
6.82
6.32
6.32
6.32
0.00
5.32
6.82
5.32
5.32
KN/m2
0
0
0
0
0
0
0
0
0
6
6
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
0.00
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
Ly
Area
0
0
0
0
0
0
0
0
0
2
2
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
0.00
2.50
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0
0
0
2
2
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
0.00
8.75
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0
0
0
0
0
0
0
0
5.3203
5.3203
0
6.82
6.32
6.82
0.00
5.32
5.32
5.32
5.32
0.00
0.00
6.82
6.32
6.32
6.32
0.00
5.32
6.82
5.32
5.32
0.00
KN/m2
0
0
0
0
0
0
0
0
8.3203
8.3203
0
9.82
9.32
8.82
0.00
8.32
8.32
8.32
8.32
0.00
0.00
8.82
9.32
8.32
8.32
0.00
8.32
9.82
8.32
8.32
0.00
0
0
0
0
0
0
0
0
6
6
0
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
Ly
Area
0
0
0
0
0
0
0
0
2
2
0
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0
0
0
0
0
0
0
0
2
2
0
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
Lx (Triangle or Trap.
Lx (Triangle or Trap.)
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
0.00
0.00
0.00
0.00
0.00
0.00
0
0
0
8.3203
8.3203
9.82
9.82
9.32
8.82
0.00
8.32
8.32
8.32
8.32
0.00
9.82
8.82
9.32
8.32
8.32
0.00
8.32
9.82
8.32
8.32
0.00
0.00
0.00
0.00
0.00
0.00
0.000
0.000
16.641
33.281
16.641
176.77
172.27
163.27
79.38
74.88
149.77
149.77
149.77
74.88
0.00
165.31
163.27
158.77
149.77
74.88
74.88
163.27
163.27
149.77
74.88
KN
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
0.00
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
0.00
48.32
48.32
48.32
48.32
48.32
48.32
0.00
48.32
0.00
0.00
0.00
0.00
48.32
48.32
48.32
48.32
0.00
48.32
9 inch (KN)
192.07
235.89
226.89
143.01
138.51
213.39
213.39
165.07
138.51
0.00
180.61
178.57
174.07
213.39
138.51
138.51
226.89
178.57
213.39
90.18
0.00
0.00
0.00
0.00
0.00
0.00
0.00
17.85
15.30
15.30
0.00
0.00
0.00
0.00
0.00
0.00
0.000
0.000
21.741
38.381
21.741
Beam
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
C4-C5
C5-C6
C6-C7
C7-C8
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C3-C4
0.34
0.34
0.34
0.34
0.34
0.30
C2-C3
0.34
0.30
C1-C2
0.34
0.34
0.34
0.34
0.34
0.34
B5-B6
0.34
A10-A11 0.30
0.30
0.34
0.34
0.30
0.30
A9-A10
0.30
0.34
0.30
A7-A8
A8-A9
B4-B5
0.34
0.30
A6-A7
B3-B4
0.34
0.30
A5-A6
0.30
0.34
0.30
A4-A5
B2-B3
0.34
0.30
A3-A4
0.30
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
B1-B2
0.34
0.30
Cir-A1
Cir-B1
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
0.00
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
6.32
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
6.82
0.00
6.32
6.82
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
8.82
0.00
9.32
9.82
9.32
0.00
0.00
9.32
0.00
0.00
8.32
8.32
8.82
8.32
0.00
8.32
8.82
9.32
8.82
8.82
8.82
8.82
9.82
8.82
8.82
8.82
9.82
9.82
8.82
8.82
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
9.32
8.32
8.32
8.82
8.32
0.00
8.32
8.82
9.32
8.82
8.82
8.82
9.82
8.82
8.82
8.82
9.82
9.82
8.82
8.82
9.32
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.32
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
0.00
9.00
9.00
12.00
9.00
0.00
9.00
12.00
9.00
9.00
4.41
0.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
0.00
5.40
6.40
5.40
0.00
5.40
6.40
5.40
0.00
0.00
5.40
5.40
0.00
5.40
0.00
5.40
6.40
0.00
0.00
3.60
4.20
5.40
5.40
6.40
5.40
0.00
0.00
6.40
5.40
5.40
3.60
0.00
48.32
0.00
51.17
60.64
51.17
0.00
51.17
60.64
51.17
0.00
0.00
51.17
51.17
0.00
51.17
0.00
51.17
60.64
0.00
0.00
34.11
39.80
51.17
51.17
60.64
51.17
0.00
0.00
60.64
51.17
51.17
34.11
0.00
9 inch walls
91.25
74.88
74.88
105.84
74.88
0.00
74.88
105.84
83.88
79.38
0.00
154.27
154.27
223.69
154.27
29.54
154.27
223.69
172.27
158.77
77.80
15.38
79.38
79.38
117.84
79.38
0.00
79.38
117.84
88.38
79.38
38.90
6.24
KN/m
Load on Beam
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
B3-C3
B4-C4
B5-C5
B6-C6
B7-C7
B8-C8
B9-C9
B10-C10 0.30
B11-C11 0.30
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
6.00
0.34
0.30
A7-B7
0.34
0.34
0.34
0.30
A6-B6
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
6.32
6.32
6.82
6.32
6.32
6.82
6.32
6.82
6.82
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
0.00
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
0.00
8.32
8.32
8.82
8.32
0.00
8.32
8.82
9.32
8.82
0.00
0.00
8.82
8.82
9.82
8.82
8.82
8.82
9.82
9.82
8.82
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
8.32
8.32
8.82
8.32
8.32
8.82
9.32
8.82
8.82
0.00
8.82
8.82
9.82
8.82
8.82
8.82
9.82
9.82
8.82
8.82
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
0.00
5.10
0.00
5.10
5.10
5.10
5.10
0.00
0.00
0.00
0.00
0.00
5.10
5.10
5.10
0.00
0.00
5.10
5.10
0.00
0.00
0.00
48.32
0.00
48.32
48.32
48.32
48.32
0.00
0.00
0.00
0.00
0.00
48.32
48.32
48.32
0.00
0.00
48.32
48.32
0.00
0.00
9 inch walls
74.88
149.77
154.27
154.27
74.88
74.88
154.27
163.27
163.27
79.38
0.00
79.38
158.77
167.77
167.77
146.69
146.69
167.77
176.77
167.77
151.62
KN/m
Load on Beam
Concrete
Marble
Plaster
Tile(25mm)
Thickness
m
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.00
0.16
0.16
0.16
0.16
0.00
0.00
0.16
0.00
0.00
0.16
0.16
0.16
0.00
Unit Weights
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
B10-B11-C10-C11
C2-C3-D2-D3
C3-C4-D3-D4
C4-C5-D4-D5
C5-C6-D5-D6
C6-C7-D6-D7
C7-C8-D7-D8
C8-C9-D8-D9
C9-C10-D9-D10
C10-C11-D10-D11
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
0.00
4.00
4.00
4.00
4.00
0.00
0.00
4.00
0.00
0.00
4.00
4.00
4.00
0.00
Dead Load
KN/m2
25
26.7
20.4
6
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.00
0.41
0.41
0.41
0.41
0.00
0.00
0.41
0.00
0.00
0.41
0.41
0.41
0.00
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.00
0.67
0.67
0.67
0.67
0.00
0.00
0.67
0.00
0.00
0.67
0.67
0.67
0.00
Marble
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
0.00
0.00
0.24
0.00
0.00
0.24
0.24
0.24
0.00
Inner Plaster
KN/m2
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.82
6.32
0.00
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
3.00
3.00
3.00
0.00
3.00
2.00
2.00
3.00
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
2.00
3
2.00
2.00
0.00
2.00
2.00
2.00
2.00
0.00
0.00
3.00
0.00
Live Load
KN/m2
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.00
1.50
1.00
0.00
1.00
1.50
1.00
1.00
0.00
0.00
1.00
0.00
0.00
1.00
1.50
1.00
0.00
Partition walls
KN/m2
Thickness of
Second Floor
2.70
1.80
1.80
2.70
2.70
1.80
1.80
1.80
2.70
1.80
1.80
1.80
1.80
2.70
1.80
1.80
0.00
1.80
1.80
1.80
1.80
0.00
0.00
2.70
0.00
0.00
2.70
2.70
2.70
0.00
Reduced
LL
m
m
m
m
9.02
8.62
8.62
9.52
9.52
8.62
8.62
8.62
9.52
8.62
8.62
8.62
8.62
9.02
8.62
8.12
0.00
8.12
8.62
8.12
8.12
0.00
0.00
9.02
0.00
0.00
9.02
9.52
9.02
0.00
Total Load
(With L.L)
Remarks
(For live load)
Balcony
Bed Rooms
Kitchen and Dining
Store & Corridors
Staircase
Kitchen and Dining
Kitchen and Dining
Kitchen and Dining
Store & Corridors
Kitchen and Dining
Normal Room
Toilet/Bathroom
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Void
Bed Rooms & W/C
Kitchen and Dining
Bedrooms & W/C
Bed Rooms
No slab
No slab
Balcony(cantilever)
No slab
No slab
Balcony(cantilever)
Cantilever
Cantilever
No slab
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
C4-C5
C5-C6
C6-C7
C7-C8
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C3-C4
0.34
0.34
0.34
0.34
0.34
0.30
C2-C3
0.34
0.30
C1-C2
0.34
0.34
0.34
0.34
0.34
0.34
B5-B6
0.34
A10-A11 0.30
0.30
0.34
0.34
0.30
0.30
A9-A10
0.30
0.34
0.30
A7-A8
A8-A9
B4-B5
0.34
0.30
A6-A7
B3-B4
0.34
0.30
A5-A6
0.30
0.34
0.30
A4-A5
B2-B3
0.34
0.30
A3-A4
0.30
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
B1-B2
0.34
0.30
Cir-A1
Cir-B1
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
0.00
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
6.32
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
6.82
0.00
6.32
6.82
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
KN/m2
8.62
0.00
9.02
9.52
9.02
0.00
0.00
9.02
0.00
0.00
8.12
8.12
8.62
8.12
0.00
8.12
8.62
9.02
8.62
8.62
8.62
8.62
9.52
8.62
8.62
8.62
9.52
9.52
8.62
8.62
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
9.02
8.12
8.12
8.62
8.12
0.00
8.12
8.62
9.02
8.62
8.62
8.62
9.52
8.62
8.62
8.62
9.52
9.52
8.62
8.62
9.02
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.02
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
0.00
9.00
9.00
12.00
9.00
0.00
9.00
12.00
9.00
9.00
4.41
0.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
0.00
5.40
6.40
5.40
0.00
5.40
6.40
5.40
0.00
0.00
5.40
5.40
0.00
5.40
0.00
5.40
6.40
0.00
0.00
3.60
4.20
5.40
5.40
6.40
5.40
0.00
0.00
6.40
5.40
5.40
3.60
0.00
48.32
0.00
51.17
60.64
51.17
0.00
51.17
60.64
51.17
0.00
0.00
51.17
51.17
0.00
51.17
0.00
51.17
60.64
0.00
0.00
34.11
39.80
51.17
51.17
60.64
51.17
0.00
0.00
60.64
51.17
51.17
34.11
0.00
9 inch walls
89.00
73.08
73.08
103.44
73.08
0.00
73.08
103.44
81.18
77.58
0.00
150.67
150.67
217.69
150.67
28.87
150.67
217.69
166.87
155.17
76.03
14.88
77.58
77.58
114.24
77.58
0.00
77.58
114.24
85.68
77.58
38.02
6.04
KN/m
Load on Beam
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
B3-C3
B4-C4
B5-C5
B6-C6
B7-C7
B8-C8
B9-C9
B10-C10 0.30
B11-C11 0.30
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
6.00
0.34
0.30
A7-B7
0.34
0.34
0.34
0.30
A6-B6
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
6.00
6.00
7.00
6.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
0.00
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
0.00
8.12
8.12
8.62
8.12
0.00
8.12
8.62
9.02
8.62
0.00
0.00
8.62
8.62
9.52
8.62
8.62
8.62
9.52
9.52
8.62
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
8.12
8.12
8.62
8.12
0.00
8.12
8.62
9.02
8.62
8.62
0.00
8.62
8.62
9.52
8.62
8.62
8.62
9.52
9.52
8.62
8.62
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
0.00
5.10
0.00
5.10
5.10
5.10
5.10
0.00
0.00
0.00
0.00
0.00
5.10
5.10
5.10
0.00
0.00
5.10
5.10
0.00
0.00
0.00
48.32
0.00
48.32
48.32
48.32
48.32
0.00
0.00
0.00
0.00
0.00
48.32
48.32
48.32
0.00
0.00
48.32
48.32
0.00
0.00
9 inch walls
73.08
146.17
150.67
150.67
73.08
73.08
150.67
158.77
158.77
77.58
0.00
77.58
155.17
163.27
163.27
143.37
143.37
163.27
171.37
163.27
148.18
KN/m
Load on Beam
Concrete
Marble
Plaster
Tile(25mm)
Thickness
m
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.00
0.16
0.16
0.16
0.16
0.00
0.00
0.16
0.00
0.00
0.16
0.16
0.16
0.00
Unit Weights
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
B10-B11-C10-C11
C2-C3-D2-D3
C3-C4-D3-D4
C4-C5-D4-D5
C5-C6-D5-D6
C6-C7-D6-D7
C7-C8-D7-D8
C8-C9-D8-D9
C9-C10-D9-D10
C10-C11-D10-D11
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
0.00
4.00
4.00
4.00
4.00
0.00
0.00
4.00
0.00
0.00
4.00
4.00
4.00
0.00
Dead Load
KN/m2
25
26.7
20.4
6
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.00
0.41
0.41
0.41
0.41
0.00
0.00
0.41
0.00
0.00
0.41
0.41
0.41
0.00
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.00
0.67
0.67
0.67
0.67
0.00
0.00
0.67
0.00
0.00
0.67
0.67
0.67
0.00
Marble
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
0.00
0.00
0.24
0.00
0.00
0.24
0.24
0.24
0.00
Inner Plaster
KN/m2
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.82
6.32
0.00
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
2.00
3
2.00
2.00
0.00
2.00
2.00
2.00
2.00
0.00
0.00
3.00
0.00
0.00
3.00
2.00
2.00
0.00
Live Load
KN/m2
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.00
1.50
1.00
0.00
1.00
1.50
1.00
1.00
0.00
0.00
1.00
0.00
0.00
1.00
1.50
1.00
0.00
Partition walls
KN/m2
Thickness of
Third Floor
2.40
1.60
1.60
1.60
2.40
1.60
1.60
1.60
2.40
1.60
1.60
1.60
1.60
2.40
1.60
1.60
0.00
1.60
1.60
1.60
1.60
0.00
0.00
2.40
0.00
0.00
2.40
1.60
1.60
0.00
Reduced
LL
m
m
m
m
8.72
8.42
8.42
8.42
9.22
8.42
8.42
8.42
9.22
8.42
8.42
8.42
8.42
8.72
8.42
7.92
0.00
7.92
8.42
7.92
7.92
0.00
0.00
8.72
0.00
0.00
8.72
8.42
7.92
0.00
Total Load
(With L.L)
Remarks
(For live load)
Balcony
Bed Rooms
Kitchen and Dining
Store & Corridors
Staircase
Kitchen and Dining
Kitchen and Dining
Kitchen and Dining
Store & Corridors
Kitchen and Dining
Normal Room
Toilet/Bathroom
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Void
Bed Rooms & W/C
Kitchen and Dining
Bedrooms & W/C
Bed Rooms
No slab
No slab
Balcony(cantilever)
No slab
No slab
Balcony(cantilever)
Cantilever
Cantilever
No slab
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
C4-C5
C5-C6
C6-C7
C7-C8
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C3-C4
0.34
0.34
0.34
0.34
0.34
0.30
C2-C3
0.34
0.30
C1-C2
0.34
0.34
0.34
0.34
0.34
0.34
B5-B6
0.34
A10-A11 0.30
0.30
0.34
0.34
0.30
0.30
A9-A10
0.30
0.34
0.30
A7-A8
A8-A9
B4-B5
0.34
0.30
A6-A7
B3-B4
0.34
0.30
A5-A6
0.30
0.34
0.30
A4-A5
B2-B3
0.34
0.30
A3-A4
0.30
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
B1-B2
0.34
0.30
Cir-A1
Cir-B1
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
0.00
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
6.32
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
6.82
0.00
6.32
6.82
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
KN/m2
8.42
0.00
7.92
8.42
8.72
0.00
0.00
8.72
0.00
0.00
7.92
7.92
8.42
7.92
0.00
7.92
8.42
8.72
8.42
8.42
8.42
8.42
9.22
8.42
8.42
8.42
9.22
8.42
8.42
8.42
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
8.72
7.92
7.92
8.42
7.92
0.00
7.92
8.42
8.72
8.42
8.42
8.42
9.22
8.42
8.42
8.42
9.22
8.42
8.42
8.42
8.72
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
8.72
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
0.00
9.00
9.00
12.00
9.00
0.00
9.00
12.00
9.00
9.00
4.41
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
0.00
5.40
6.40
5.40
0.00
5.40
6.40
5.40
0.00
0.00
5.40
5.40
0.00
5.40
0.00
5.40
6.40
0.00
0.00
3.60
4.20
5.40
5.40
6.40
5.40
0.00
0.00
6.40
5.40
5.40
3.60
0.00
48.32
0.00
51.17
60.64
51.17
0.00
51.17
60.64
51.17
0.00
0.00
51.17
51.17
0.00
51.17
0.00
51.17
60.64
0.00
0.00
34.11
39.80
51.17
51.17
60.64
51.17
0.00
0.00
60.64
51.17
51.17
34.11
0.00
9 inch walls
86.75
71.28
71.28
101.04
71.28
0.00
71.28
101.04
78.48
75.78
0.00
147.07
147.07
211.69
147.07
28.20
147.07
211.69
154.27
151.57
74.27
14.39
75.78
75.78
110.64
75.78
0.00
75.78
110.64
75.78
75.78
37.13
5.84
KN/m
Load on Beam
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
B3-C3
B4-C4
B5-C5
B6-C6
B7-C7
B8-C8
B9-C9
B10-C10 0.30
B11-C11 0.30
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
6.00
0.34
0.30
A7-B7
0.34
0.34
0.34
0.30
A6-B6
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
6.00
6.00
7.00
6.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
0.00
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
0.00
7.92
7.92
8.42
7.92
0.00
7.92
8.42
8.72
8.42
0.00
0.00
8.42
8.42
9.22
8.42
8.42
8.42
9.22
8.42
8.42
0.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
Ly
0.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
7.92
7.92
8.42
7.92
0.00
7.92
8.42
8.72
8.42
8.42
0.00
8.42
8.42
9.22
8.42
8.42
8.42
9.22
8.42
8.42
8.42
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
0.00
5.10
0.00
5.10
5.10
5.10
5.10
0.00
0.00
0.00
0.00
0.00
5.10
5.10
5.10
0.00
0.00
5.10
5.10
0.00
0.00
0.00
48.32
0.00
48.32
48.32
48.32
48.32
0.00
0.00
0.00
0.00
0.00
48.32
48.32
48.32
0.00
0.00
48.32
48.32
0.00
0.00
9 inch walls
71.28
142.57
147.07
147.07
71.28
71.28
147.07
154.27
154.27
75.78
0.00
75.78
151.57
158.77
158.77
140.04
140.04
158.77
158.77
151.57
144.74
KN/m
Load on Beam
Concrete
Marble
Plaster
Tile(25mm)
Thickness
m
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.00
0.16
0.16
0.16
0.16
0.00
0.00
0.16
0.00
0.00
0.16
0.16
0.16
0.00
Unit Weights
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
B10-B11-C10-C11
C2-C3-D2-D3
C3-C4-D3-D4
C4-C5-D4-D5
C5-C6-D5-D6
C6-C7-D6-D7
C7-C8-D7-D8
C8-C9-D8-D9
C9-C10-D9-D10
C10-C11-D10-D11
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
0.00
4.00
4.00
4.00
4.00
0.00
0.00
4.00
0.00
0.00
4.00
4.00
4.00
0.00
Dead Load
KN/m2
25
26.7
20.4
6
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.00
0.41
0.41
0.41
0.41
0.00
0.00
0.41
0.00
0.00
0.41
0.41
0.41
0.00
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.00
0.67
0.67
0.67
0.67
0.00
0.00
0.67
0.00
0.00
0.67
0.67
0.67
0.00
Marble
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
0.00
0.00
0.24
0.00
0.00
0.24
0.24
0.24
0.00
Inner Plaster
KN/m2
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.82
6.32
0.00
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
3.00
2.00
2.00
3.00
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
2.00
3
2.00
2.00
0.00
2.00
2.00
2.00
2.00
0.00
0.00
3.00
0.00
0.00
3.00
2.00
2.00
0.00
Live Load
KN/m2
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.00
1.50
1.00
0.00
1.00
1.50
1.00
1.00
0.00
0.00
1.00
0.00
0.00
1.00
1.50
1.00
0.00
Partition walls
KN/m2
Thickness of
Fourth Floor
2.10
1.40
1.40
2.10
2.10
1.40
1.40
1.40
2.10
1.40
1.40
1.40
1.40
2.10
1.40
1.40
0.00
1.40
1.40
1.40
1.40
0.00
0.00
2.10
0.00
0.00
2.10
1.40
1.40
0.00
Reduced
LL
m
m
m
m
8.42
8.22
8.22
8.92
8.92
8.22
8.22
8.22
8.92
8.22
8.22
8.22
8.22
8.42
8.22
7.72
0.00
7.72
8.22
7.72
7.72
0.00
0.00
8.42
0.00
0.00
8.42
8.22
7.72
0.00
Total Load
(With L.L)
Remarks
(For live load)
Balcony
Bed Rooms
Kitchen and Dining
Store & Corridors
Staircase
Kitchen and Dining
Kitchen and Dining
Kitchen and Dining
Store & Corridors
Kitchen and Dining
Normal Room
Toilet/Bathroom
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Void
Bed Rooms & W/C
Kitchen and Dining
Bedrooms & W/C
Bed Rooms
No slab
No slab
Balcony(cantilever)
No slab
No slab
Balcony(cantilever)
Cantilever
Cantilever
No slab
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
C4-C5
C5-C6
C6-C7
C7-C8
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C3-C4
0.34
0.34
0.34
0.34
0.34
0.30
C2-C3
0.34
0.30
C1-C2
0.34
0.34
0.34
0.34
0.34
0.34
B5-B6
0.34
A10-A11 0.30
0.30
0.34
0.34
0.30
0.30
A9-A10
0.30
0.34
0.30
A7-A8
A8-A9
B4-B5
0.34
0.30
A6-A7
B3-B4
0.34
0.30
A5-A6
0.30
0.34
0.30
A4-A5
B2-B3
0.34
0.30
A3-A4
0.30
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
B1-B2
0.34
0.30
Cir-A1
Cir-B1
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
0.00
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
6.32
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
6.82
0.00
6.32
6.82
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
KN/m2
8.22
0.00
7.72
8.22
8.42
0.00
0.00
8.42
0.00
0.00
7.72
7.72
8.22
7.72
0.00
7.72
8.22
8.42
8.22
8.22
8.22
8.22
8.92
8.22
8.22
8.22
8.92
8.92
8.22
8.22
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
8.42
7.72
7.72
8.22
7.72
0.00
7.72
8.22
8.42
8.22
8.22
8.22
8.92
8.22
8.22
8.22
8.92
8.92
8.22
8.22
8.42
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
8.42
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
0.00
9.00
9.00
12.00
9.00
0.00
9.00
12.00
9.00
9.00
4.41
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
0.00
5.40
6.40
5.40
0.00
5.40
6.40
5.40
0.00
0.00
5.40
5.40
0.00
5.40
0.00
5.40
6.40
0.00
0.00
3.60
4.20
5.40
5.40
6.40
5.40
0.00
0.00
6.40
5.40
5.40
3.60
0.00
48.32
0.00
51.17
60.64
51.17
0.00
51.17
60.64
51.17
0.00
0.00
51.17
51.17
0.00
51.17
0.00
51.17
60.64
0.00
0.00
34.11
39.80
51.17
51.17
60.64
51.17
0.00
0.00
60.64
51.17
51.17
34.11
0.00
9 inch walls
84.50
69.48
69.48
98.64
69.48
0.00
69.48
98.64
75.78
73.98
0.00
143.47
143.47
205.69
143.47
27.53
143.47
205.69
156.07
147.97
72.50
13.89
73.98
73.98
107.04
73.98
0.00
73.98
107.04
80.28
73.98
36.25
5.64
KN/m
Load on Beam
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
B3-C3
B4-C4
B5-C5
B6-C6
B7-C7
B8-C8
B9-C9
B10-C10 0.30
B11-C11 0.30
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
6.00
0.34
0.30
A7-B7
0.34
0.34
0.34
0.30
A6-B6
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
6.00
6.00
7.00
6.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
0.00
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
0.00
7.72
7.72
8.22
7.72
0.00
7.72
8.22
8.42
8.22
0.00
0.00
8.22
8.22
8.92
8.22
8.22
8.22
8.92
8.92
8.22
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
7.72
7.72
8.22
7.72
0.00
7.72
8.22
8.42
8.22
8.22
0.00
8.22
8.22
8.92
8.22
8.22
8.22
8.92
8.92
8.22
8.22
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
0.00
5.10
0.00
5.10
5.10
5.10
5.10
0.00
0.00
0.00
0.00
0.00
5.10
5.10
5.10
0.00
0.00
5.10
5.10
0.00
0.00
0.00
48.32
0.00
48.32
48.32
48.32
48.32
0.00
0.00
0.00
0.00
0.00
48.32
48.32
48.32
0.00
0.00
48.32
48.32
0.00
0.00
9 inch walls
69.48
138.97
143.47
143.47
69.48
69.48
143.47
149.77
149.77
73.98
0.00
73.98
147.97
154.27
154.27
136.71
136.71
154.27
160.57
154.27
141.31
KN/m
Load on Beam
Concrete
Marble
Plaster
Tile(25mm)
Thickness
m
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.00
0.16
0.16
0.16
0.16
0.00
0.00
0.16
0.00
0.00
0.16
0.16
0.16
0.00
Unit Weights
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
B10-B11-C10-C11
C2-C3-D2-D3
C3-C4-D3-D4
C4-C5-D4-D5
C5-C6-D5-D6
C6-C7-D6-D7
C7-C8-D7-D8
C8-C9-D8-D9
C9-C10-D9-D10
C10-C11-D10-D11
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
0.00
4.00
4.00
4.00
4.00
0.00
0.00
4.00
0.00
0.00
4.00
4.00
4.00
0.00
Dead Load
KN/m2
25
26.7
20.4
6
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.00
0.41
0.41
0.41
0.41
0.00
0.00
0.41
0.00
0.00
0.41
0.41
0.41
0.00
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.00
0.67
0.67
0.67
0.67
0.00
0.00
0.67
0.00
0.00
0.67
0.67
0.67
0.00
Marble
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.24
0.24
0.24
0.24
0.00
0.00
0.24
0.00
0.00
0.24
0.24
0.24
0.00
Inner Plaster
KN/m2
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.82
6.32
0.00
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
3.00
2.00
2.00
3.00
3.00
2.00
2.00
2.00
3.00
2.00
2.00
2.00
2.00
3
2.00
2.00
0.00
2.00
2.00
2.00
2.00
0.00
0.00
3.00
0.00
0.00
3.00
2.00
2.00
0.00
Live Load
KN/m2
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.00
1.50
1.00
0.00
1.00
1.50
1.00
1.00
0.00
0.00
1.00
0.00
0.00
1.00
1.50
1.00
0.00
Partition walls
KN/m2
Thickness of
Fifth Floor
1.80
1.20
1.20
1.80
1.80
1.20
1.20
1.20
1.80
1.20
1.20
1.20
1.20
1.80
1.20
1.20
0.00
1.20
1.20
1.20
1.20
0.00
0.00
1.80
0.00
0.00
1.80
1.20
1.20
0.00
Reduced
LL
m
m
m
m
8.12
8.02
8.02
8.62
8.62
8.02
8.02
8.02
8.62
8.02
8.02
8.02
8.02
8.12
8.02
7.52
0.00
7.52
8.02
7.52
7.52
0.00
0.00
8.12
0.00
0.00
8.12
8.02
7.52
0.00
Total Load
(With L.L)
Remarks
(For live load)
Balcony
Bed Rooms
Kitchen and Dining
Store & Corridors
Staircase
Kitchen and Dining
Kitchen and Dining
Kitchen and Dining
Store & Corridors
Kitchen and Dining
Normal Room
Toilet/Bathroom
Bed Rooms
Store
Kitchen and Dining
Bed Rooms & W/C
Void
Bed Rooms & W/C
Kitchen and Dining
Bedrooms & W/C
Bed Rooms
No slab
No slab
Balcony(cantilever)
No slab
No slab
Balcony(cantilever)
Cantilever
Cantilever
No slab
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
C4-C5
C5-C6
C6-C7
C7-C8
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C3-C4
0.34
0.34
0.34
0.34
0.34
0.30
C2-C3
0.34
0.30
C1-C2
0.34
0.34
0.34
0.34
0.34
0.34
B5-B6
0.34
A10-A11 0.30
0.30
0.34
0.34
0.30
0.30
A9-A10
0.30
0.34
0.30
A7-A8
A8-A9
B4-B5
0.34
0.30
A6-A7
B3-B4
0.34
0.30
A5-A6
0.30
0.34
0.30
A4-A5
B2-B3
0.34
0.30
A3-A4
0.30
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
B1-B2
0.34
0.30
Cir-A1
Cir-B1
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
0.00
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
6.32
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
6.82
0.00
6.32
6.82
6.32
0.00
0.00
6.32
0.00
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
0.00
KN/m2
8.02
0.00
7.52
8.02
8.12
0.00
0.00
8.12
0.00
0.00
7.52
7.52
8.02
7.52
0.00
7.52
8.02
8.12
8.02
8.02
8.02
8.02
8.62
8.02
8.02
8.02
8.62
8.62
8.02
8.02
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
8.12
7.52
7.52
8.02
7.52
0.00
7.52
8.02
8.12
8.02
8.02
8.02
8.62
8.02
8.02
8.02
8.62
8.62
8.02
8.02
8.12
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
8.12
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
0.00
9.00
9.00
12.00
9.00
0.00
9.00
12.00
9.00
9.00
4.41
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
0.00
5.40
6.40
5.40
0.00
5.40
6.40
5.40
0.00
0.00
5.40
5.40
0.00
5.40
0.00
5.40
6.40
0.00
0.00
3.60
4.20
5.40
5.40
6.40
5.40
0.00
0.00
6.40
5.40
5.40
3.60
0.00
48.32
0.00
51.17
60.64
51.17
0.00
51.17
60.64
51.17
0.00
0.00
51.17
51.17
0.00
51.17
0.00
51.17
60.64
0.00
0.00
34.11
39.80
51.17
51.17
60.64
51.17
0.00
0.00
60.64
51.17
51.17
34.11
0.00
9 inch walls
82.25
67.68
67.68
96.24
67.68
0.00
67.68
96.24
73.08
72.18
0.00
139.87
139.87
199.69
139.87
26.86
139.87
199.69
150.67
144.37
70.74
13.40
72.18
72.18
103.44
72.18
0.00
72.18
103.44
77.58
72.18
35.37
5.44
KN/m
Load on Beam
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
B3-C3
B4-C4
B5-C5
B6-C6
B7-C7
B8-C8
B9-C9
B10-C10 0.30
B11-C11 0.30
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
6.00
0.34
0.30
A7-B7
0.34
0.34
0.34
0.30
A6-B6
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
6.82
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
6.00
6.00
7.00
6.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
6.32
6.32
6.82
6.32
0.00
6.32
6.82
6.32
6.82
0.00
0.00
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
6.82
KN/m2
0.00
7.52
7.52
8.02
7.52
0.00
7.52
8.02
8.12
8.02
0.00
0.00
8.02
8.02
8.62
8.02
8.02
8.02
8.62
8.62
8.02
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
7.52
7.52
8.02
7.52
0.00
7.52
8.02
8.12
8.02
8.02
0.00
8.02
8.02
8.62
8.02
8.02
8.02
8.62
8.62
8.02
8.02
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
0.00
5.10
0.00
5.10
5.10
5.10
5.10
0.00
0.00
0.00
0.00
0.00
5.10
5.10
5.10
0.00
0.00
5.10
5.10
0.00
0.00
0.00
48.32
0.00
48.32
48.32
48.32
48.32
0.00
0.00
0.00
0.00
0.00
48.32
48.32
48.32
0.00
0.00
48.32
48.32
0.00
0.00
9 inch walls
67.68
135.37
139.87
139.87
67.68
67.68
139.87
145.27
145.27
72.18
0.00
72.18
144.37
149.77
149.77
133.39
133.39
149.77
155.17
149.77
137.87
KN/m
Load on Beam
Concrete
Marble
Plaster
Tile(25mm)
Thickness
m
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.00
0.00
0.00
0.00
0.00
0.00
0.16
0.00
0.00
Unit Weights
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
B10-B11-C10-C11
C2-C3-D2-D3
C3-C4-D3-D4
C4-C5-D4-D5
C5-C6-D5-D6
C6-C7-D6-D7
C7-C8-D7-D8
C8-C9-D8-D9
C9-C10-D9-D10
C10-C11-D10-D11
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
0.00
0.00
0.00
0.00
0.00
0.00
4.00
0.00
0.00
Dead Load
KN/m2
25
26.7
20.4
6
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.00
0.00
0.00
0.00
0.00
0.00
0.41
0.00
0.00
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.00
0.00
0.00
0.00
0.00
0.00
0.67
0.00
0.00
Marble
KN/m2
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.00
0.00
0.00
0.00
0.00
0.00
0.24
0.00
0.00
Inner Plaster
KN/m2
5.32
5.32
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
0.00
0.00
0.00
0.00
0.00
0.00
5.32
0.00
0.00
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
1.50
1.50
2.00
2.00
3.00
1.50
1.00
1.50
3.00
2.00
2.00
1.50
1.50
2
2.00
1.50
1.00
1.50
2.00
2.00
1.50
0.00
0.00
0.00
0.00
0.00
0.00
3.00
0.00
0.00
Live Load
KN/m2
0.025
0.02
0.025
0.012
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
0.00
0.00
1.50
1.50
1.50
0.00
0.00
0.00
1.50
1.50
1.50
0.00
0.00
1.50
1.50
0.00
0.00
0.00
1.50
1.50
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Partition walls
KN/m2
Thickness of
Sixth Floor
0.75
0.75
1.00
1.00
1.50
0.75
0.50
0.75
1.50
1.00
1.00
0.75
0.75
1.00
1.00
0.75
0.50
0.75
1.00
1.00
0.75
0.00
0.00
0.00
0.00
0.00
0.00
1.50
0.00
0.00
Reduced
LL
m
m
m
m
6.07
6.07
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
0.00
0.00
0.00
0.00
0.00
0.00
6.82
0.00
0.00
Total Load
(With L.L)
Remarks
(For live load)
Accessible roof
Accessible roof
Bed Room & Toilet
Kitchen and Dining
Staircase
Accessible roof
Inaccessible Roof
Accessible roof
Staircase
Kitchen and Dining
Bed Room
Accessible roof
Accessible roof
Bed Room & Toilet
living Room
Accessible roof
Inaccessible Roof
Accessible roof
living Room
Bedrooms & W/C
Accessible roof
No slab
No slab
No slab
No slab
No slab
No slab
Balcony(Cantilever)
No slab
No slab
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
0.30
A10-A11 0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
A9-A10
Cir-B1
B1-B2
B2-B3
B3-B4
B4-B5
B5-B6
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.30
0.30
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C7-C8
0.34
0.34
0.30
0.30
C6-C7
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
C5-C6
0.30
0.34
0.30
A7-A8
A8-A9
0.30
0.34
0.30
A6-A7
C4-C5
0.34
0.30
A5-A6
C3-C4
0.34
0.30
A4-A5
0.30
0.34
0.30
A3-A4
C2-C3
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
C1-C2
0.34
0.30
Cir-A1
0.34
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
2.50
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
6.38
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
5.32
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
5.32
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
3.13
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
5.32
0.00
0.00
5.32
0.00
0.00
0.00
0.00
0.00
0.00
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
5.32
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
0.00
KN/m2
6.07
0.00
0.00
6.82
0.00
0.00
0.00
0.00
0.00
0.00
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
6.07
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
6.07
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
6.07
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
6.07
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.07
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
3.13
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.40
5.10
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
1.90
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
3.60
4.20
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
0.00
0.00
51.17
60.64
0.00
0.00
0.00
60.64
51.17
0.00
0.00
51.17
0.00
60.64
0.00
0.00
0.00
60.64
0.00
51.17
0.00
0.00
51.17
0.00
60.64
0.00
0.00
0.00
60.64
0.00
51.17
0.00
0.00
9 inch walls
82.25
67.68
67.68
96.24
67.68
0.00
67.68
96.24
73.08
72.18
0.00
139.87
139.87
199.69
139.87
26.86
139.87
199.69
150.67
144.37
70.74
13.40
72.18
72.18
103.44
72.18
0.00
72.18
103.44
77.58
72.18
35.37
5.44
KN/m
Load on Beam
0.34
6.00
6.00
B11-C11 0.30
B9-C9
6.00
6.00
0.30
B8-C8
0.34
6.00
6.00
0.34
0.30
B7-C7
0.34
0.34
0.34
0.30
B6-C6
6.00
6.00
0.30
0.30
B5-C5
0.34
0.34
B10-C10 0.30
0.30
B4-C4
6.00
6.00
0.30
B3-C3
0.34
6.00
0.00
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
0.34
0.30
A7-B7
0.34
6.00
0.34
0.30
A6-B6
0.34
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
5.32
0.00
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
KN/m2
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
2.50
0.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
3.13
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
0.00
0.00
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
KN/m2
0.00
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
0.00
0.00
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
6.07
0.00
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
0.00
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
0.00
48.32
0.00
48.32
0.00
0.00
48.32
0.00
48.32
0.00
0.00
48.32
48.32
48.32
48.32
0.00
0.00
48.32
48.32
48.32
48.32
9 inch walls
54.63
125.02
140.77
125.02
54.63
54.63
125.02
140.77
125.02
73.60
0.00
70.38
140.77
145.27
129.52
54.63
54.63
129.52
145.27
140.77
120.10
KN/m
Load on Beam
Thickness
m
0.00
0.00
0.16
0.16
0.16
0.00
0.00
0.00
0.16
0.16
0.16
0.00
0.00
0.16
0.16
0.00
0.00
0.00
0.16
0.16
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
B1-B2-C2
B2-B3-C2-C3
B3-B4-C3-C4
B4-B5-C4-C5
B5-B6-C5-C6
B6-B7-C6-C7
B7-B8-C7-C8
B8-B9-C8-C9
B9-B10-C9-C10
Concrete
Marble
Plaster
Tile(25mm)
Unit Weights
Dead Load
KN/m2
0.00
0.00
4.00
4.00
4.00
0.00
0.00
0.00
4.00
4.00
4.00
0.00
0.00
4.00
4.00
0.00
0.00
0.00
4.00
4.00
25
26.7
20.4
6
0.00
0.00
0.15
0.15
0.15
0.00
0.00
0.15
0.15
0.00
0.00
0.00
0.15
0.15
0.00
0.00
0.41
0.41
0.41
0.00
0.00
0.41
0.41
0.00
0.00
0.00
0.41
0.41
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
Marble
KN/m2
0.00
0.24
0.24
0.24
0.00
0.00
0.24
0.24
0.00
0.00
0.00
0.24
0.24
Inner Plaster
KN/m2
0.00
0.00
0.24
0.24
0.24
Thickness of
Total load
(without L.L)
0.00
0.00
5.80
5.80
5.80
0.00
0.00
1.00
5.80
5.80
4.80
0.00
0.00
5.80
5.80
0.00
0.00
0.00
5.80
5.80
Marble
Plaster
Tile
Inner Plaster
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Partition walls
KN/m2
0.00
0.00
0.15
0.15
0.15
Plaster
KN/m2
0.00
0.00
0.41
0.41
0.41
KN/m3
KN/m3
KN/m3
KN/m3
Pent House
0.00
1.50
1.50
1.50
0.00
0.00
1.5
1.50
0.00
0.00
0.00
1.50
1.50
Live Load
KN/m2
1.50
0.00
1.50
1.50
1.50
0.025
0.02
0.025
0.012
Reduced
LL
0.75
0.00
0.75
0.75
0.75
0.00
0.00
0.00
0.75
0.75
0.75
0.00
0.00
0.75
0.75
0.00
0.00
0.00
0.75
0.75
m
m
m
m
Total Load
(With L.L)
0.75
0.00
6.55
6.55
6.55
0.00
0.00
1.00
6.55
6.55
5.55
0.00
0.00
6.55
6.55
0.00
0.00
0.00
6.55
6.55
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
0.30
A10-A11 0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
A9-A10
Cir-B1
B1-B2
B2-B3
B3-B4
B4-B5
B5-B6
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.34
0.34
0.34
0.34
0.30
0.30
C8-C9
C9-C10
C10-C11 0.30
A1-B1
0.30
0.34
0.30
C7-C8
0.34
0.34
0.30
0.30
C6-C7
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
C5-C6
0.30
0.34
0.30
A7-A8
A8-A9
0.30
0.34
0.30
A6-A7
C4-C5
0.34
0.30
A5-A6
C3-C4
0.34
0.30
A4-A5
0.30
0.34
0.30
A3-A4
C2-C3
0.34
0.30
A2-A3
0.30
0.34
0.30
A1-A2
C1-C2
0.34
0.30
Cir-A1
0.34
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
2.50
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
6.38
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
12.24
15.30
15.30
17.85
15.30
9.33
15.30
17.85
15.30
15.30
10.71
5.10
5.32
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
5.32
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
2.04
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
3.13
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
1.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.67
(Triangle or Trap.)
Area
5.32
0.00
0.00
5.32
0.00
0.00
0.00
0.00
0.00
0.00
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
5.32
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
0.00
KN/m2
6.07
0.00
0.00
6.82
0.00
0.00
0.00
0.00
0.00
0.00
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
6.07
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
0.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Ly
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
6.07
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
6.07
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
6.07
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
6.07
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
Area
8.19
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
3.13
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.40
5.10
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
1.90
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
5.40
3.60
4.20
5.40
5.40
6.40
5.40
3.06
5.40
6.40
5.40
0.00
0.00
51.17
60.64
0.00
0.00
0.00
60.64
51.17
0.00
0.00
51.17
0.00
60.64
0.00
0.00
0.00
60.64
0.00
51.17
0.00
0.00
51.17
0.00
60.64
0.00
0.00
0.00
60.64
0.00
51.17
0.00
0.00
9 inch walls
82.25
67.68
67.68
96.24
67.68
0.00
67.68
96.24
73.08
72.18
0.00
139.87
139.87
199.69
139.87
26.86
139.87
199.69
150.67
144.37
70.74
13.40
72.18
72.18
103.44
72.18
0.00
72.18
103.44
77.58
72.18
35.37
5.44
KN/m
Load on Beam
0.34
6.00
6.00
B11-C11 0.30
B9-C9
6.00
6.00
0.30
B8-C8
0.34
6.00
6.00
0.34
0.30
B7-C7
0.34
0.34
0.34
0.30
B6-C6
6.00
6.00
0.30
0.30
B5-C5
0.34
0.34
B10-C10 0.30
0.30
B4-C4
6.00
6.00
0.30
B3-C3
0.34
6.00
0.00
0.34
0.30
B2-C2
0.34
0.34
0.30
B1-C1
6.00
A11-B11 0.30
A9-B9
6.00
6.00
0.30
A8-B8
0.34
6.00
0.34
0.30
A7-B7
0.34
6.00
0.34
0.30
A6-B6
0.34
6.00
6.00
0.30
0.30
A5-B5
0.34
0.34
A10-B10 0.30
0.30
A4-B4
6.00
6.00
0.30
A3-B3
0.34
0.34
0.30
A2-B2
Beam
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
0.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
0.00
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
15.30
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
5.32
0.00
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
5.32
KN/m2
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
0.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
2.50
0.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
4.20
Lx
Area
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
3.13
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
8.19
(Triangle or Trap.)
0.00
5.32
6.82
6.82
5.32
5.32
5.32
6.82
6.82
5.32
0.00
0.00
6.82
6.82
6.82
5.32
5.32
5.32
6.82
6.82
6.82
KN/m2
0.00
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
0.00
0.00
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
0.00
0.00
6.00
6.00
7.00
6.00
0.00
6.00
7.00
6.00
6.00
Ly
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
0.00
0.00
6.00
6.00
6.00
6.00
0.00
6.00
6.00
6.00
6.00
Lx
Dim. Of Slab2
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
6.07
7.82
7.82
6.07
5.82
6.07
7.82
7.82
6.07
6.07
0.00
7.82
7.82
8.32
6.07
5.82
6.07
8.32
7.82
7.82
6.07
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
Area
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
0.00
0.00
9.00
9.00
9.00
9.00
0.00
9.00
9.00
9.00
9.00
(Triangle or Trap.)
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
height
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
0.00
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
0.00
48.32
0.00
48.32
0.00
0.00
48.32
0.00
48.32
0.00
0.00
48.32
48.32
48.32
48.32
0.00
0.00
48.32
48.32
48.32
48.32
9 inch walls
54.63
125.02
140.77
125.02
54.63
54.63
125.02
140.77
125.02
73.60
0.00
70.38
140.77
145.27
129.52
54.63
54.63
129.52
145.27
140.77
120.10
KN/m
Load on Beam
4.00
4.00
4.00
4.00
0.16
0.16
Dead Load
KN/m2
25
26.7
20.4
6
0.16
0.16
Thickness
m
Slab
Circular-A1-B1
A1-A2-B1-B2
A2-A3-B2-B3
A3-A4-B3-B4
A4-A5-B4-B5
A5-A6-B5-B6
A6-A7-B6-B7
A7-A8-B7-B8
A8-A9-B8-B9
A9-A10-B9-B10
A10-A11-B10-B11
Concrete
Marble
Plaster
Tile(25mm)
Unit Weights
0.41
0.41
0.41
0.41
2.50
2.50
Partition walls
KN/m2
0.00
0.00
Marble
KN/m2
1.00
1.00
1.00
1.00
Inner Plaster
KN/m2
Thickness of
5.41
7.91
7.91
5.41
Total load
(without L.L)
Marble
Plaster
Tile
Inner Plaster
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
Plaster
KN/m2
KN/m3
KN/m3
KN/m3
KN/m3
Water tank
1.50
1.50
1.50
1.50
Live Load
KN/m2
0.025
0.02
0.025
0.012
Reduced
LL
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.75
0.75
m
m
m
m
Total Load
(With L.L)
0.00
0.00
9.41
6.91
0.00
0.00
0.00
0.00
0.00
6.91
9.41
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
B3-B4
B4-B5
B5-B6
B6-B7
B7-B8
B8-B9
B9-B10
B10-B11 0.30
0.30
B2-B3
A2-B2
A3-B3
A4-B4
A5-B5
A6-B6
A7-B7
A8-B8
A9-B9
A10-B10 0.30
A11-B11 0.30
0.34
B1-B2
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.30
0.30
Cir-B1
0.34
0.34
A9-A10
0.30
0.34
0.34
0.30
0.30
A7-A8
A8-A9
A10-A11 0.30
0.34
0.34
0.30
0.30
0.34
0.30
A4-A5
A5-A6
0.34
0.30
A3-A4
A6-A7
0.34
0.34
0.30
0.30
A1-A2
0.34
0.30
Cir-A1
A2-A3
Beam
Unit Wt.Conc. 25
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
4.80
6.00
6.00
7.00
6.00
3.66
6.00
7.00
6.00
6.00
4.20
2.00
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
2.55
KN/m
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
KN/m2
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Ly
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
8.19
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lx
7.91
7.91
5.41
5.41
0.00
0.00
5.41
5.41
7.91
7.91
7.91
0.00
5.41
0.00
0.00
0.00
5.41
7.91
0.00
7.91
0.00
5.41
0.00
0.00
0.00
5.41
7.91
0.00
(Triangle or Trap.)
9.41
9.41
6.91
6.91
0.00
0.00
6.91
6.91
9.41
9.41
9.41
0.00
6.91
0.00
0.00
0.00
6.91
9.41
0.00
9.41
0.00
6.91
0.00
0.00
0.00
6.91
9.41
0.00
KN/m2
0.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
Mani Pandit, Manika Maharjan, Narendra Dangol, Pankaj Baral, Pravash Mool
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
7.00
6.00
6.00
6.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Area
Dead Load beam load Load from Slab1 Load from Slab1 Dim. Of Slab1
KN/m3
0.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
2.50
6.00
6.00
6.00
6.00
3.66
6.00
6.00
6.00
6.00
4.20
Ly
9.00
9.00
9.00
9.00
9.00
7.63
9.00
9.00
9.00
9.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
3.13
0.00
9.00
9.00
12.00
9.00
3.35
9.00
12.00
9.00
9.00
4.41
Lx
Dim. Of Slab2
Area
11.86
11.86
8.11
8.11
0.00
0.00
8.11
8.11
11.86
11.86
11.86
0.00
9.27
0.00
0.00
0.00
9.27
0.00
11.86
0.00
0.00
11.86
0.00
9.27
0.00
0.00
0.00
9.27
0.00
11.86
0.00
(Triangle or Trap.)
84.67
84.67
62.17
62.17
0.00
0.00
62.17
62.17
84.67
84.67
84.67
0.00
82.90
0.00
0.00
0.00
82.90
0.00
84.67
0.00
0.00
84.67
0.00
82.90
0.00
0.00
0.00
82.90
0.00
84.67
0.00
KN/m
Load on Beam
0.00
0.00
84.67
84.67
72.53
72.53
0.00
0.00
72.53
72.53
84.67
84.67
0.00
84.67
84.67
72.53
72.53
0.00
0.00
72.53
72.53
84.67
84.67
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
125.82
125.82
113.68
113.68
0.00
0.00
113.68
113.68
125.82
125.82
0.00
125.82
125.82
113.68
113.68
0.00
0.00
113.68
113.68
125.82
125.82
0.00
0.00
67.53
130.78
140.75
80.88
0.00
0.00
82.00
140.75
121.78
61.90
0.00
70.90
197.40
272.81
157.33
0.00
0.00
155.08
272.81
191.78
65.28
0.00
70.90
148.63
85.38
0.00
0.00
82.00
148.63
74.28
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
DL Of column sixth
41.15
41.15
41.15
41.15
0.00
41.15
41.15
41.15
41.15
0.00
41.15
41.15
41.15
41.15
0.00
0.00
41.15
41.15
41.15
41.15
0.00
41.15
41.15
41.15
0.00
0.00
41.15
41.15
41.15
234.49
297.74
295.58
235.71
0.00
0.00
236.83
295.58
288.74
228.87
0.00
237.87
364.37
427.64
312.16
0.00
0.00
309.91
427.64
358.74
232.24
0.00
112.05
189.78
126.53
0.00
0.00
123.15
189.78
115.42
15.71
62.02
179.02
213.46
236.45
220.70
84.35
84.35
220.70
236.45
213.46
135.43
78.05
260.28
370.29
396.60
389.26
156.37
156.37
389.26
396.60
370.29
197.71
92.09
197.71
232.62
215.45
84.35
84.35
215.45
232.62
197.71
69.93
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
DL Of column fifth
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
56.86
103.17
454.67
552.35
573.18
497.56
125.49
125.49
498.68
573.18
543.35
405.44
119.20
539.29
775.80
865.39
742.57
197.52
197.52
740.32
865.39
770.18
471.10
133.24
350.91
463.55
383.13
125.49
125.49
379.75
463.55
354.28
111.08
37.99
118.30
186.00
223.88
272.38
241.40
122.75
148.33
266.98
266.98
242.64
113.07
163.43
257.94
325.63
411.75
450.69
261.26
227.42
350.44
326.28
342.14
154.56
87.48
193.80
237.42
256.18
137.39
103.55
186.25
162.09
140.38
49.14
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
DL Of column
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
135.99
262.62
681.82
817.38
886.72
780.11
289.39
314.97
806.82
881.32
827.14
559.66
323.78
838.38
1142.58
1318.28
1234.41
499.93
466.09
1131.91
1232.81
1153.46
666.81
261.87
585.85
742.12
680.46
304.03
270.19
607.15
666.79
535.80
201.37
column
E1
E2
E3
E4
O
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
fourth
38.34
119.97
189.06
228.38
278.23
246.35
125.31
150.90
271.93
271.93
246.24
114.87
165.69
263.24
334.63
422.40
459.54
265.96
231.21
357.49
333.33
347.54
157.26
89.28
198.30
242.22
260.08
139.19
104.45
188.35
164.19
142.18
50.04
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
DL Of column third
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
215.48
423.74
912.03
1086.91
1206.10
1067.61
455.85
507.02
1119.90
1194.40
1114.53
715.67
530.62
1142.77
1518.36
1781.83
1735.10
807.03
738.45
1530.55
1607.29
1542.14
865.21
392.30
825.30
1025.49
981.69
484.38
415.79
836.65
872.13
719.13
292.56
38.68
121.64
192.12
225.68
276.88
251.30
127.88
153.46
276.88
276.88
249.84
116.67
167.94
268.54
336.43
425.85
468.39
270.65
235.01
364.54
340.38
352.94
159.96
91.08
202.80
247.02
263.98
140.99
105.35
190.45
166.29
143.98
50.94
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
295.31
586.52
1145.30
1353.74
1524.13
1360.06
624.88
701.63
1437.93
1512.43
1405.52
873.48
739.71
1452.45
1895.94
2248.82
2244.64
1118.83
1014.61
1936.23
1988.81
1936.23
1066.31
524.53
1069.24
1313.66
1286.83
666.52
562.29
1068.25
1079.57
904.25
384.65
39.03
123.30
195.18
237.38
289.93
256.25
130.44
156.02
281.83
281.83
253.44
118.47
170.20
273.84
352.63
443.70
477.24
275.35
238.81
371.59
347.43
358.34
162.66
92.88
207.30
251.82
267.88
142.79
106.25
192.55
168.39
145.78
51.84
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
375.49
750.97
1381.63
1632.26
1855.22
1657.46
796.47
898.80
1760.92
1835.42
1700.11
1033.10
951.05
1767.44
2289.72
2733.67
2763.03
1435.33
1294.56
2348.97
2377.39
2335.71
1270.12
658.56
1317.69
1606.63
1595.86
850.46
709.69
1301.95
1289.10
1091.18
477.64
39.38
124.97
198.24
241.88
295.78
261.20
133.00
158.59
286.78
286.78
257.04
120.27
172.45
279.14
361.63
454.35
486.09
280.05
242.61
378.64
354.48
363.74
165.36
94.68
211.80
256.62
271.78
144.59
107.15
194.65
170.49
147.58
52.74
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
DL Of column
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
41.15
456.01
917.09
1621.02
1915.29
2192.15
1959.81
970.62
1098.53
2088.85
2163.35
1998.30
1194.51
1164.65
2087.73
2692.50
3229.17
3290.27
1756.53
1578.32
2768.76
2773.01
2740.60
1476.62
794.39
1570.64
1904.41
1908.79
1036.20
857.99
1537.75
1500.74
1279.90
571.53
column
E1
E2
E3
E4
O
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
ground
18.39
120.44
204.09
250.88
290.53
281.53
144.43
139.93
266.53
266.53
223.88
139.93
143.54
323.85
370.63
443.85
475.59
255.79
225.70
420.44
421.86
379.87
196.88
137.65
211.80
251.37
266.53
144.59
144.59
282.28
276.69
282.63
134.33
0.00
0.00
0.00
0.00
0.00
0.00
17.85
54.89
68.98
18.52
basemenDL Of column
52.01 10.73 136.23
136.21 10.73 286.23
155.95 10.73 325.72
90.14 10.73 194.10
19.92 47.32 705.44
136.53 47.32 1526.96
313.79 47.32 2653.79
363.82 47.32 3113.72
361.83 47.32 3415.59
305.33 47.32 3041.18
160.46 47.32 1625.19
169.46 47.32 1757.60
297.00 47.32 3146.89
315.83 47.32 3249.22
256.34 47.32 2933.05
160.46 47.32 1844.58
117.58 47.32 1779.76
359.15 47.32 3353.67
462.10 47.32 4168.32
473.07 47.32 4846.83
445.24 47.32 4854.62
253.07 47.32 2716.72
291.53 47.32 2546.89
501.30 47.32 4334.00
518.48 47.32 4384.69
376.99 47.32 4111.18
267.91 47.32 2437.04
262.57 47.32 1589.49
470.36 47.32 2737.35
482.49 47.32 3262.10
450.79 47.32 3241.58
213.47 47.32 1815.82
213.47 47.32 1637.61
395.74 47.32 2831.25
422.34 47.32 2834.06
317.13 47.32 2453.99
206.10 47.32 1305.70
140.83 10.73 195.91
255.46 10.73 335.47
276.43 10.73 412.28
227.61 10.73 408.34
71.76 10.73 175.72
71.76 10.73 175.72
93.69 10.73 248.17
187.49 10.73 433.85
178.66 10.73 428.14
104.58 10.73 237.79
Total
96249.55
)UDPH
$VW
$WVHFWLRQ
G
DUHDDV
Q
$VW
%RWWRP%DU
$WPLGVSDQ
G
DUHDDV
Q
Q
$VW
$WVHFWLRQ
G
DUHDDV
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$VW
$WHQGVHFWLRQ
G
DUHDDV
%DVHPHQW
Q
$VW
7RS%DU
$WPLGVSDQ
G
DUHDDV
Q
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
)UDPH
$VW
$WVHFWLRQ
G
DUHDDV
Q
$VW
%RWWRP%DU
$WPLGVSDQ
G
DUHDDV
Q
Q
$VW
$WVHFWLRQ
G
DUHDDV
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$VW
$WHQGVHFWLRQ
G
DUHDDV
%DVHPHQW
Q
$VW
7RS%DU
$WPLGVSDQ
G
DUHDDV
Q
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
)UDPH
$VW
$WVHFWLRQ
G
DUHDDV
Q
%RWWRP%DU
$WPLGVSDQ
$VW
G
DUHDDV
Q
Q
$VW
$WVHFWLRQ
G
DUHDDV
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
$VW
7RS%DU
$WPLGVSDQ
GPP DUHDDV
Q
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
)UDPH
$VW
$WVHFWLRQ
G
DUHDDV
Q
%RWWRP%DU
$WPLGVSDQ
$VW
G
DUHDDV
Q
Q
$VW
$WVHFWLRQ
G
DUHDDV
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
$VW
7RS%DU
$WPLGVSDQ
GPP DUHDDV
Q
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
)UDPH %
%RWWRP%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
$WPLGVSDQ
$VW
G
DUHDDV Q
DUHDDV
Q
7RS%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$WHQGVHFWLRQ
$VW
G
*URXQG)ORRU
$WPLGVSDQ
$VW
GPP DUHDDV
Q
$WHQGVHFWLRQ
$VW
G
DUHDDV
Q
)UDPH %
%RWWRP%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
$WPLGVSDQ
$VW
G
DUHDDV Q
DUHDDV
Q
7RS%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$WHQGVHFWLRQ
$VW
G
*URXQG)ORRU
$WPLGVSDQ
$VW
GPP DUHDDV
Q
$WHQGVHFWLRQ
$VW
G
DUHDDV
Q
)UDPH
$VW
$WVHFWLRQ
G DUHDDV
Q
$VW
%RWWRP%DU
$WPLGVSDQ
G
DUHDDV
Q
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
&&
$VW
$WVHFWLRQ
G
DUHDDV
Q
$VW
7RS%DU
$WPLGVSDQ
G
DUHDDV
Q
$VW
$WHQGVHFWLRQ
G
DUHDDV
Q
)UDPH %
%RWWRP%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
$WPLGVSDQ
$VW
G
DUHDDV
Q
DUHDDV
Q
7RS%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDDVK0RRO
$WHQGVHFWLRQ
$VW
G
&
$WPLGVSDQ
Q
$VW
GPPDUHDDV
$WHQGVHFWLRQ
$VW
G
DUHDDV Q
)UDPH %
%RWWRP%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
$WPLGVSDQ
$VW
G
DUHDDV
Q
DUHDDV
Q
7RS%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDDVK0RRO
$WHQGVHFWLRQ
$VW
G
$WPLGVSDQ
Q
$VW
GPPDUHDDV
$WHQGVHFWLRQ
$VW
G
DUHDDV Q
)UDPH
%RWWRP%DU
$WVHFWLRQ
$VW
G
DUHDDV Q
$WPLGVSDQ
$VW
G
DUHDDV
Q
DUHDDV
Q
7RS%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$WHQGVHFWLRQ
$VW
G
UG)ORRU%HDPV
$WPLGVSDQ
$VW
GPP DUHDDV Q
$WHQGVHFWLRQ
$VW
G
DUHDDV Q
&
d
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
&
d
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
)UDPH
%RWWRP%DU
$WVHFWLRQ
$VW
G
DUHDDV
Q
$WPLGVSDQ
$VW
G
DUHDDV
Q
DUHDDV
Q
7RS%DU
$WVHFWLRQ
$VW
G
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
$WHQGVHFWLRQ
$VW
G
3HQW+RXVH%HDPV
DUHDDV Q
$WPLGVSDQ
$VW
GPP
DUHDDV
Q
$WHQGVHFWLRQ
$VW
G
DUHDDV Q
&
E
s >
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
'HVLJQRIFROXPQV
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
)UDPH
&ROXPQ
$VPP
%DUGLDPP
1XPEHU
9GHVLJQPP
0DQL3DQGLW0DQLND0DKDUMDQ1DUHQGUD'RQJRO3DQNDM%DUDO3UDYDVK0RRO
3W
'HVLJQRIFROXPQV
/LQNVSDFLQJPP
203
5()(5(1&(6
/LVWRI5HIHUHQFHV
1. A.K Jain (2002) Reinforced Concrete Limit State Design
2. Anil K. Chopra Dynamics of Structure
3. Charles E. Reynolds and James C. Steedmann Reinforced concrete Designers Handbook
4. Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures IS:875 (part 1) 1987
5. Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures IS:875 (part2) 1987
6. Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures IS:875 (part 4) 1987
7. Criteria for Earthquake Resistant Design of Structure - IS 1893(Part I):2000
8. Design Aids for Reinforced Concrete - SP 16
9. Ductile Detailing of Reinforced Concrete Structures subjected to Seismic Forces- Code of
Practices IS 13920:1993
10. Handbook on Concrete Reinforcement & Detailing - SP 34(S & T):1987
11. P. C. Varghese (1998) Limit State Design of Reinforced Concrete
12. P. Dayaratnam (1994) Handbook on Design and Detailing of Structures
13. Plain & Reinforced Concrete Code of Practice - IS 456:2000
14. S.N. Sinha Reinforced Concrete Design
15. S. U. Pillai & D. Menon (1998) Reinforced Concrete Design
16. U H Varyani (2002) Structural Design of Multi Storey Buildings