Vous êtes sur la page 1sur 1

INTRODUCTION

This research was conducted departing from the motivation to seek a solution to an industry problem, namely the
problems faced by the industrial installation of gas-steam power plants, particularly in the economiser tool mounted
on the components of the HRSG (Heat Recovery Steam Generator). The main problems faced by the energy
generating plant is economiser tools that exist in the installation section more often have to undergo maintenance to
cleaning than they should.
According to the specifications of the instrument cleaning should be done once per year. However, in practice the
cleaning operation performed, on average, more than twice per year.
It is certainly cause the tool maintenance costs become very high, is more than two fold higher than expected.
At the same time, the frequency of maintenance resulted in the installation also experience a loss of production
which affects the greater loss overall.
Economizer tool whose primary function is to ensure the flow of water level changes state from a state level subcooler after coming out of the pump into a saturated liquid state level before then evaporated in the evaporator tool.
Pressurized steam is then generated by the system economizer-evaporator-superheater contained in the HRSG is
used to generate electric power generator and propulsion turbine is used for heating in the papermaking process.
Role tool economizer is vital, because if performance economizer impaired so that its performance decreases, it can
lead to the power generated by the turbine will be lower because of the pressure and temperature of the vapor stream
turbine inlet is lower than it should be, then the heating process in the papermaking process be disrupted as well, all
of which would result in huge losses.

Vous aimerez peut-être aussi